null  null
1.5.4
4.5 GHz
Up/Down Converter
Data Sheet
Leading Communication Technologies
GENERAL DESCRIPTION
Microkim's
line of various up
/down converters
are used
for wireless
communication applications such as: Point-to-Point, Point-to-Multi-point, WLL,
MMDS, LMDS. These modules range from high-end modules for military and
industrial applications to low-cost modules for general commercial applications.
GENERAL SPECIFICATIONS
GENERAL SPECIFICATIONS
RX
TX
TX Operating Freq'
TX Output Power (P1dB)
TX OIP3
@ -7dB, -15 dB
TX NF
TX Power Monitoring Accuracy
RX Operating Freq'
Receiving Noise Figure
Receiver Gain
Receiver Gain Variation
4.4 -5 GHz
< 2.5 dB
Min 20 dB
+/-0.5 dB Max within any
30 MHz BW.
+/-2 dB Max within any BW
Receiver Gain Variation
With Temperature
Receiver Group Delay Variation
Receiver RF return loss
Receiver Spurious to RF
Receiver IF Spurious
In band (780 - 820 MHz)
Out of band
Receiver Image Rejection
Receiver RF Input P1dB
Receiver RF Input IP3
Receiver LO level (ext LO)
Receiver LO Freq'
Receiver IF Freq'
Receiver IF Return Loss
+/-3 dB Max
+/-1ns Max within any 30
MHz BW (by simulation)
12 dB Min.
<-40 dBc , LO leakade
-30 dBc
<-45 dBc
-20 dBc
-20 dBc
-15 dBm
-7 dB
0 dBm+/-2.0 dB
1850 – 2150 MHz (LO/2)
780 – 820 MHz
12dB Min.
SMA (F)
180 x 100 x 20 mm (x 2)
10 V, -5 V
2 A, 0.1A
6 V, -5 V.
0.5A, 0.1A.
ETS 300 019 class 4.1E
0 to 60 °C
Note: Specifications are subject to change without notice.
3 Ha’Yozma St.
P.O. Box 2023
Tirat Carmel, 39120
Israel
Transmit Spurious
LO leakage
Transmit Gain
Transmit Gain Variation
Transmit Group Delay Variation
GENERAL
Connectors RF, LO, IF
Dimensions
TX Input Voltage
TX Current Consumption
RX Input Voltage
RX Current Consumption
Operating Conditions
Operating Temperature
TX Power Monitoring Dynamic
Range
TX Gain Variation
TX Power output Var. with temp.
Transmit on/off (by power Supply)
Transmitter Stability
Tel:
Fax:
Email:
Website:
+972 (0)4 813-5400
+972 (0)4 858-0534
[email protected]
www.microkim.com
Transmit RF return loss
Transmit IF Freq'
Transmit IF return loss
TX LO Freq' ( ext LO )
TX LO level ( ext LO )
4.4 – 5 GHz
Min +35 dBm
Min +45 dBm 2 ton 3 MHz,
Max 15 dB
35-25 dBm +/-1.0 dB
(over freq' & temp')
25-20 dBm +/-1.5dB
(0.5 to 4.5v output).
20-15 dBm +/-2.0 dB (and
between units)
Min 20 dB from P1 dB
+/-1.5 dB
+/-2 dB
-60 dBc.
Within any Return loss
level & Phase.
In band 4.4 – 5 GHz -55
dBc @ 30 KHz RBW
-15 dBm (Out of band -25
dBm)
35 dB Min.
+/-0.5 dB Max within any
30 MHz BW
+/-1ns Max within any 30
MHz BW (by simulation)
12 dB Min.
825 – 860 MHz
Min 12 dB
1800 – 2100 MHz ( LO/2 )
0 dBm +/-2.0 dB
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement