The Q 106 is a very compact full-range, 2

The Q 106 is a very compact full-range, 2
The Q 106 is a very compact full-range, 2-way bass reflex loudspeaker system. Equipped with a single 6.5” woofer (1.5” coil) and 1”
compression driver (1.4” coil) coupled to a constant directivity rotable horn with 70deg.H x 50deg.V coverage. This speaker system
is the smallest of the QUBE range and features outstanding performance, practicality and ease of use. With its limited size and
weight, and a sound impact (120dB SPL) comparable to that of “bigger” systems in the series, the Q106 offers the ideal amplified
sound solution when the requirement is for high output capability neutral sound balance and compact dimensions. The Q106 multi
shape cabinet with 30 and 45 angles is ideal as small monitor for professional musicians. Easy arrayable, thanks to the dedicated
hardware, the speaker is perfect in fixed installations for pubs, conference halls, waiting rooms, .... blending effortlessly with the
surroundings thanks to their carefully crafted professional look.
The cabinet is constructed from 12mm birch polywood finish in a durable and scratch resistant paint. Dual-mode passive filter with
facility for full-range or bi-amp operation with external processing of the signal. 8 M6 anchoring points for suspended installation and
full compatibility with variety of mounting hardware. The connector panel’s have dual Neutrik NL4 speakon for reliable input and loop
through connections.
Configuration
Recommended amplifier (1)
Long term power AES (2)
Short term power IEC 268-5
Nominal impedance
Frequency response @-6dB (3)
Sensitivity @1W, 1m (4)
Max SPL (5)
Dispersion @-6 dB (HxV) )
Crossover frequency
Recommended HP filter
2 WAY
BI-AMP
200W rms
200W LF / 50W
100 W
100W LF / 25W HF
400 W
400W LF / 100W HF
8 ohm
8 ohm LF / 8 ohm HF
65 Hz - 18 kHz
65 Hz -18 kHz
94 dB
94 dB LF / 105 dB HF
120 dB
120 dB LF / 125 dB HF
70° x 50°
70° x 50°
2.5 kHz
2.5 kHz - 24 dB oct.
55 Hz - 24 dB oct.
55 Hz - 24 dB oct.
Low frequency woofer
High frequency driver
Input connectors
Net dimensions (WxHxD)
Net weight
Enclosure materials
Finish
Grille
1 x 6,5” - coil Ø 1,5”
1 x 1” + coil Ø 1,4”
2 x speakon NL4 paralleled
200 x 350 x 237 mm
6 kg
12 mm birch wood
wear-resistant textured black paint
black powder coated perforated steel
with foam
(1) amplifier power on nominal loudspeaker impedance
(4) average SPLmeasured over the freq. response range
(2) 2 hours, pink noise with crest factor 2, applied RMS voltage corresponding to the power on theminimum of
themodulus of the impedance of the speaker in full rangemode, or of the driver in bi-amp mode.
(5) calculated based on short term power capacity and measured 1W, 1m
full space sensitivity
(3) full-space on axis
Q 106
Q FACTOR & DIRECTIVITY INDEX (DI)
Q(f)
DI(f)
dB SPL
110
105
100
95
90
85
80
75
70
65
100
10
60
55
50
10Hz 20
1
100
1000
-18--6
-6-6
10000
FULL SPACE FREQUENCY RESPONSE
50
100
200
500
1k
2k
5k
10k
HORIZONTAL BEAMWIDTH (-6dB)
-18--6
Deg.
-6-6
VERTICAL BEAMWIDTH (-6dB)
90°
80°
70°
60°
50°
40°
30°
20°
10°
0°
10°
20°
30°
40°
50°
60°
70°
80°
90°
dB
Freq.
Freq.
HORIZONTAL POLAR DIAGRAM
VERTICAL POLAR DIAGRAM
210
500
200
190
1000
180
0
170
160
230
210
200
110
-24
250
100
260
-30
270
-36
90
270
-36
80
280
70
300
340
350
0
10
20
8000
210
200
190
180
170
160
230
70
240
4000
150
350
0
8000
210
140
200
190
230
120
110
180
240
250
-30
270
-36
90
270
-36
80
280
70
310
50
320
40
330
340
350
0
10
20
30
150
140
130
120
110
-24
260
60
160
-18
100
300
170
16000
-12
-30
290
20
12500
0
260
280
10
-6
220
130
-24
340
30
HORIZONTAL POLAR DIAGRAM
16000
-18
250
50
40
330
-12
90
320
12500
0
100
60
30
-6
220
110
310
VERTICAL POLAR DIAGRAM
4000
120
80
40
330
130
300
50
320
140
290
60
310
150
-24
-30
290
160
2000
-18
260
280
170
-12
240
120
1000
180
-6
230
130
-18
250
500
190 0
220
140
-12
240
250
2000
150
-6
220
40k
Deg.
90°
80°
70°
60°
50°
40°
30°
20°
10°
0°
10°
20°
30°
40°
50°
60°
70°
80°
90°
dB
250
20k
100000
100
90
80
290
70
300
60
310
50
320
40
330
340
350
0
10
20
30
REINFORCEMENT LOUDSPEAKER
FULL-RANGE MODE:
HF
1-
LF
2+
21+
NOMINAL IMPEDANCE (ohm)
RECOMMENDED AMPLIFIER (Wrms)
SHORT TERM (IEC 268-5) (Wrms)
LONG TERM (IEC 268-5) (W)
FREQ. RESPONSE (@-6dB)
SENSITIVITY (@1W / 1m) (dB)
PEAK SPL (dB)
DISPERSION (H x V)
1-
2+
21+
8
200
400
100
65Hz - 18kHz
94
120
70° x 50°
BI-AMP MODE:
HF
LF
NOMINAL IMPEDANCE (ohm)
RECOMMENDED AMPLIFIER (Wrms)
SHORT TERM (IEC 268-5) (Wrms)
LONG TERM (IEC 268-5) (W)
FREQ. RESPONSE (@-6dB)
SENSITIVITY (@1W / 1m) (dB)
PEAK SPL (dB)
DISPERSION (H x V)
8 LF-8 HF
200 LF-50HF
400 LF-100 HF
100 LF-25HF
65Hz - 18kHz
94 LF-105 HF
120 LF-125 HF
70° x 50°
FULL-RANGE
(PASSIVE)
X-OVER
MODE
SELECTOR
BI-AMP
LINK
MANUFACTURED IN EEC
Q 106
ARCHITECTURAL & ENGINEERING SPECS.
The 2-way full range loudspeaker shall incorporate one 6,5” LF transducer
and a 1” HF driver.
The HF driver shall be loaded on a rotable constant directivity horn with a
nominal coverage pattern of 70deg. (H) x 50deg. (V).
An internal dual-mode passive filter with HF protection shall provide
acoustical crossover and system equalization.
Input panel shall easily change from passive to biamp operation via internal
connector.
System frequency response shall vary no more than +/- 6dB from 65Hz to
18kHzmeasured on axis.
The loudspeaker shall produce a sound pressure level (SPL) of 120 dB on
axis at 1 meter.
It shall handle 100 watts of amplifier power long term (AES standard) and
shall have a nominal impedance of 8 ohm.
It shall be constructed of 12mm Baltic birch wood with internal reinforcement.
Input connectors shall be two NL4 speakon.
The front of loudspeaker shall be covered with a powder-coated perforated
grille with foam.
The 2-way full-range loudspeaker shall be theQUBEmodelQ106.
HF
1-
LF
2+
21+
1-
2+
21+
FBT Elettronica S.p.A.
www.fbt.it
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement