[email protected] (Page 1) - 21st Century Distributing

RXV367UC@NPB (Page 1) - 21st Century Distributing
AV Receiver
RX-A1010
NEW PRODUCT BULLETIN
AVENTAGE model designed for exquisite audio quality and featuring A.R.T. Wedge,
8 in (1 on front panel)/2 out HDMI, SCENE PLUS, network functions incl. Web
Browser Control, AV Controller app compatibility, custom installation-friendly
functions with Zone 2 Video.
Oil-Damped Hidden Control Panel
Includes USB Port, Video Aux Input
Terminals, Zone 2 Switch, YPAO Optimized
Microphone Jack, And More.
Audio Features
• 7-channel powerful surround sound
110W per Channel (8 ohms, 20 Hz-20 kHz, 0.06 % THD, 2 ch driven)
120W per Channel (8 ohms, 1 kHz, 0.9 % THD, 2 ch driven)
• HD Audio format decoding: Dolby TrueHD and DTS-HD Master Audio; Dolby Digital Plus
and DTS-HD High Resolution Audio
• Selected high quality parts to achieve optimum audio performance
• Symmetrical power amplifier layout
• Heat sink with anti-vibration and anti-thermal properties
• Rigid chassis with additional bottom frames
• DAC on Pure Ground circuitry
• High speed thermal feedback power amplifier
• Low jitter PLL circuitry helps optimize sound imaging
• Extra 5th foot with Anti-Resonance Technology (A.R.T. Wedge) to reduce vibration
• Detachable Power Cable for easier installation (also allows cable upgrade)
• Assignable amplifiers for bi-amp connection
• Intelligent assignable amplifiers for Surround Back <-> Front Presence or Zone 2
Video Features
• Analog and HDMI video upscaling to full HD 1080p
• 1080p-compatible HDMI: 8 inputs (1 on front) and 2 outputs (simultaneous)
• Supports Deep Color (30/36 bit), x.v.Color, 24Hz Refresh Rate and Auto
Lip-Sync compensation
• High quality video processing with precise deinterlacing
- Motion adaptive and edge adaptive deinterlacing
- Multi-cadence (incl. 3-2 pull-down) detection
• HDMI with 3D and Audio Return Channel
Advanced Features
• SCENE PLUS - simple and versatile functionality
- HDMI CEC powers up compatible TVs and Blu-ray Disc™ players
- 12 SCENE choices (4 on front panel and others on GUI)
- Zone SCENE - 4 SCENE buttons for Zone 2
- Versatile parameters can be stored into each SCENE
• Network functions
- AV Controller app for operating various functions from an iPhone or iPad etc
- Android app available in the coming months
- Access to: Internet Radio (vTuner): MP3, WMA
Streaming Services (Rhapsody®*, SIRIUS Internet Radio*, Pandora®*, Napster®)
Music files on PC (WAV, MP3, WMA, AAC, FLAC)
- Web Browser Control via PC or PDA
- Receiver Manager through network connection
- DLNA 1.5 certified
• HD Radio™ with iTunes tagging*
• SIRIUS Satellite Radio ready*
• HDMI front panel input for devices such as camcorders and digital cameras
• HDMI CEC with versatile control from AV Receiver remote control
• Front panel USB Digital Connection for iPod and iPhone
• Advanced multi-language GUI on-screen display with album art
• YPAO sound optimization with multi-point measurement
• Flexibly assignable component video and optical/coaxial (except Video Aux) inputs
allow a wide range of source components
• Ability to change HDMI input while in Standby Through mode
• iPod/iPhone compatibility with optional YDS-12 Universal Dock
• iPod/iPhone song titles displayed in English and Western European languages on
the front panel and on-screen display
• Wireless connection for iPod/iPhone with optional YID-W10
• Bluetooth (A2DP) compatibility with optional Yamaha Bluetooth® Wireless Audio
Receiver YBA-10
• Dialogue Lift
• Preset remote unit
• Background video feature (for tuner, Net, USB and SIRIUS Satellite Radio*)
*For USA only
Surround Realism
• HD Audio decoding with CINEMA DSP 3D (17 DSP programs)
• Compressed Music Enhancer with CINEMA DSP
• Virtual Presence Speaker function for CINEMA DSP 3D surround without Front
Presence Speakers
• Channel expandability with external amplifier (7-channel expandability,
bi-amping)
• Adaptive DRC (Dynamic Range Control) and Adaptive DSP Level
Versatile Zone Control
• Zone 2 on/off and control on front panel
• Zone 2 video assign (Component, S-Video, Composite)
• System Backup / Recovery function
• Multi-channel output in main Zone plus 2-channel HDMI output in a second Zone
• Zone mono, Zone volume, tone controls and balance
• Party mode
Eco-Friendly Design
• Auto power down function with variable time setting
• Low Standby Power Consumption of 0.3W
• Low Standby Power Consumption of 2W (HDMI Standby Through mode)
Technical Data 1
AV Receiver
RX-A1010
NEW PRODUCT BULLETIN
Extra-Convenient SCENE PLUS
Symmetrical Power Amplifier Layout
Optimum Audio Quality Design Concept
The SCENE PLUS function simplifies operation by
providing one touch power-on along with selection
of the desired source and the appropriate DSP
program. SCENE PLUS offers a choice of 12 SCENE
selections, four of which can be assigned to the
second zone in a multi-zone
system. SCENE PLUS can be
selected from the front panel,
remote control, GUI and even
from the iPhone app.
This is just one of the many design details that all
combine to create a superior receiver. The interior of
the unit has been precisely planned, circuit-routed
and built so that the left and right channels are
physically and electrically isolated. This naturally
maximizes channel
Amp Boards / Heat Sinks
separation, but also greatly
improves signal to noise ratio
and also helps to achieve a
Transformer
wide, open sound stage.
The AVENTAGE line of high-performance AV receivers
is based on an audio design concept that can best be
expressed as “uncompromising excellence.” By expertly
harmonizing traditional and advanced technologies,
every factor that affects sound quality, even to an
aluminum front panel and
unique A.R.T. Wedge foot, is
handled with no other
thought than to achieve the
best possible audio quality.
Main Specifications
Audio Section
Rated Output Power (8 ohms, 20 Hz-20 kHz, 0.06 % THD, 2 ch driven)
Front L/R
Center
Surround L/R
Surround Back L/R
Rated Output Power (8 ohms, 1 kHz, 0.9 % THD, 2 ch driven)
Front L/R
Center
Surround L/R
Surround Back L/R
Dynamic Power/Ch (Front L/R, 8/6/4/2 ohms)
110 W + 110 W
110 W
110 W + 110 W
110 W + 110 W
General
Standby Power Consumption
HDMI Control off, Standby Through off
HDMI Control on, Standby Through on
120 W + 120 W
120 W
120 W + 120 W
120 W + 120 W
Dimensions (W x H x D)
Weight
135/165/210/280 W
0.3 W
2W
17-1/8” x 7-1/8” x 17”
435 x 182 x 432 mm
33.3 lbs.; 15.1 kg
Optional Accessories
Universal Dock
for iPod/iPhone
YDS-12
Wireless Dock
System for iPod/iPhone
YID-W10
iPhone not
included
Yamaha Bluetooth® Wireless
Audio Receiver
YBA-10
iPhone not included
* Availability varies depending on area.
USA Model
Extensive Connections
Inputs
HDMI*1
Network
SIRIUS*2
USB*1
Radio Antenna (FM/AM) incl. HD Radio*2
Dock Terminal for Optional Dock Accessories
Optical Digital (Assignable except Video AUX)*1
Coaxial Digital (Assignable)
Analog AV*1 / Audio (with Phono)
Component Video (Assignable)
Composite*1 / S-Video*1
Multi-Channel External Decoder
*1 Including front panel terminals.
*2 For USA only
8
1
1
1
1/1
1
4
3
5/5
4
5/5
8ch
Outputs
HDMI
Optical Digital
Analog Audio
Pre Out
Component Video Monitor*3
Composite / S-Video Monitor*3
AV Out (Composite / S-Video)
Speaker (without subwoofer)*4
Extra Speaker*5
Subwoofer
Headphone Jack
2 (simultaneous)
1
1
7.2ch
1
1/1
1/1
7ch
2ch
2 x mono
1
Others
Zone 2 Out with Volume and Tone Controls
Remote In/Out*6
+12V / Total 100 mA Trigger Out*7
RS-232C
Terminal for Detachable Power Cable
1
1/1
2
1
1
*6 SCENE-IR support
*7 Yamaha subwoofer system control support
*3 Assignable to monitor out or Zone 2 out.
*4 Banana-plug compatible speaker terminals.
*5 Extra Speaker : Zone 2/Front Presence, Bi-Amp.
• “Made for iPod,” and “Made for iPhone,” mean that an electronic accessory has been designed to connect specifically to iPod, iPhone, respectively, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its
compliance with safety and regulatory standards. Please note that the use of this accessory with iPod, iPhone, may affect wireless performance. iPhone, iPod, iPod classic, iPod nano, and iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries. • The Bluetooth® word
mark and logos are registered trademarks owned by Bluetooth SIG, Inc. • Dolby and the double-D symbol are registered trademarks of Dolby Laboratories. • DTS and the Symbol are registered trademarks and the DTS logos are trademarks of DTS, Inc. • Windows is a registered trademark of
Microsoft Corporation in the United States and other countries. • HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC. • DLNA Certified is a trademark of the Digital Living Network Alliance. • Burr-Brown products
are trademarks of Texas Instruments, Inc. • “x.v.Color” is a trademark of Sony Corporation. • CINEMA DSP is a trademark of Yamaha Corporation. • SILENT CINEMA is a trademark of Yamaha Corporation. • Product designs and specifications are subject to change without notice.
[email protected]
Technical Data 2
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement