PCIe x16 Gen 3 Switch-based Cable Adapter
PCIe x16 Gen 3 switch-based cable adapter with an NT port and a DMA controller. The cable adapter
OSS-PCIe-HIB38-x16-H/T
• Operates at up to 128Gb/s at PCIe Gen 3 speeds
• Requires no additional software
• Half-card form factor
• Switch-based board can operate in host or target mode
T E C H N I C A L S P E C I F I C A T I O N S
Block diagram
PCIe x16 Gen 3 Cable Adapter
Form Factor
Dimensions
Power
PCIe low profile
5.85 x 2.34" (14.85 x 5.94 cm)
1.5A @ 3.3V
Connectors
900mA @ 12V
250mA @ 3.3V aux
PCIe x16 cable connector
PCIe x16 edge connector
Operating Temperature 0˚C to +50˚C
Storage Temperature -40˚C to 85˚C
Operating Humidity 10% to 90% relative humidity non-condensing
Storage Humidity 5% to 95% relative humidity non-condensing
PCB
PCIe Switch
PCI Express add-in card standard
Thickness .063 +/-0.008 inch (1.6 +/- 0.2mm)
• PLX PEX8733
• 8.0 GT/s 32-Lane PCI Express Gen 3 Switch
Bracket
• DMA controller
Standard and low profile brackets available
Two LEDs on bracket
Agency Compliance Designed to meet:
FCC Class A
CE
RoHS
Dimensional drawing www.onestopsystems.com