Bosch MIC-CMB mounting kit Datasheet

Video | MIC Series Mounting Brackets and Other Accessories
MIC Series Mounting Brackets and Other
Accessories
www.boschsecurity.com
Bosch Security Systems offers a range of mounting
brackets and various accessory products for the
MIC Series of cameras. These accessories, including
adapters, converters, and washer kits, have been
designed to work seamlessly with the MIC Series to
extend the functionality of the camera so that it best
fits your application. This datasheet provides an
overview of the available MIC accessories. In some
cases, complete information about a product is on a
separate product datasheet. MIC mounting brackets
and accessories are suitable for all MIC series
applications.
Note: Not all colors of mounting brackets are available
for all models of MIC cameras.
System overview
Mounting Brackets
The mounting brackets (for corner, wall, and pole
mounting) are available in the standard colors of the
MIC Series, including stainless steel. Shallow and
deep conduit adapters add extra flexibility to the
mounting possibilities.
u
Full range of mounting brackets and other
accessories.
u
Designed to integrate seamlessly with the MIC
Series.
u
Provides a best-fit solution for virtually any
application.
u
Easy to use and install.
u
Accessories extend functionality.
Corner Mount Bracket
The MIC corner mount bracket (MIC-CMB) is designed
to work with a wall mount bracket (MIC-WMB) and
optional shallow conduit adapter (MIC-SCA) to allow
MIC Series cameras to be mounted on the corners of
buildings. The MIC-CMB is manufactured from
stainless steel and powder coated for maximum
corrosion resistance.
Wall Mount Bracket
The MIC wall mount bracket (MIC-WMB) is designed to
work in conjunction with a spreader plate (MIC-SPR),
a corner mount bracket (MIC-CMB), a deep conduit
adapter (MIC-DCA), or a shallow conduit adapter
(MIC-SCA) to allow mounting on building walls, or with
a pole mount bracket (MIC-PMB) and MIC-SCA to
allow mounting on lamp posts, scaffolding, and other
nonstandard mounting posts. The MIC-WMB is
manufactured from solid aluminum or stainless steel.
It provides a 4 in. pitched circle diameter (PCD)
mounting position for the MIC camera and has a deep
bowl to accommodate the composite cable and
connector. An O-ring provides a watertight seal to
protect the cable connector.
2 | MIC Series Mounting Brackets and Other Accessories
Pole Mount Bracket
The MIC pole mount bracket (MIC-PMB) is designed to
work with a shallow conduit adapter (MIC-SCA) and a
wall mount bracket (MIC-WMB) to allow MIC Series
cameras to be mounted on lamp posts, scaffolding,
and other nonstandard mounting posts. The pole
mount bracket is machined from clear anodized
aluminum and has with two large worm drive clips for
attachment to a wide range of pole diameters.
Spreader Plate
The MIC spreader plate (MIC-SPR) is designed to work
with a deep conduit adapter (MIC-DCA), or with the
shallow conduit adapter (MIC-SCA) and the wall
mount bracket (MIC-WMB), to allow MIC Series
cameras to be mounted securely to flat surfaces with
either an external conduit adapter or by feeding the
cable through a hole in the mounting surface. The MICSPR is manufactured from aluminum plate and powder
coated to the same standard as the MIC Series
cameras. An unpainted stainless steel version is also
available.
Deep Conduit Adapter
The MIC deep conduit adapter (MIC-DCA) is designed
to allow a weatherproof conduit to be fitted to protect
the MIC composite cable. The MIC-DCA has sufficient
room to allow the composite cable connecter to
connect to the MIC camera foot. The MIC-DCA is
machined from solid aluminum and provides a 4 in
pitched circle diameter (PCD) mounting position for
the MIC camera. An O-ring and an optional Nebar
gasket provide a watertight seal to protect the
electrical connectors on the camera base and the
composite cable connector. The MIC-DCA has two 25
mm holes for conduit or cable glands to be fitted, one
in the base and one side entry. A plug with O-ring is
provided to seal the unused hole.
Shallow Conduit Adapter
The MIC shallow conduit adapter (MIC-SCA) is
designed to work with a wall mount bracket (MICWMB) and a pole mount bracket (MIC-PMB), or with a
spreader plate (MIC-SPR), to allow MIC Series
cameras to be mounted to flat walls or lamp posts,
scaffolding, and other nonstandard mounting posts.
The MIC-SCA has a single 25 mm side entry conduit
fitting hole. There is not sufficient room inside to allow
the camera to be mounted to it directly. (Use a MICDCA instead.) The MIC-SCA is machined from solid
aluminum or stainless steel and provides a 4 in
pitched circle diameter (PCD) mounting position for a
MIC-WMB. An O-ring provides for a watertight seal to
protect the composite cable.
MIC440 Sunshield
The MIC440 Sunshield is designed to provide
additional protection against direct solar radiation by
reflecting solar exposure and creating an insulating
gap between the environment and the surface of the
camera. It is a two (2) part molding and comes with
four (4) stainless steel screws. To tighten the screws,
a 5 mm hex wrench is required, but not supplied.
MIC Sunshield for MIC612 and MIC412
The MIC Sunshield for thermal cameras is designed to
provide additional protection against direct solar
radiation, particularly in sunny climates. It is a two (2)
part molding and comes with:
• eight (8) stand-offs, with knurled tattoo grip along the
edge of one end, of 316 stainless steel (for MIC612)
• eight (8) stand-offs, of 316 stainless steel (for
MIC412)
• eight (8) pan-head M3 washers, of 316 stainless steel
• eight (8) M3 retaining screws, 10 mm, of 316
stainless steel
MIC-USB485CVTR Converter
The MIC Series USB to RS485 signal converter is a
compact unit that allows a PC without a serial port to
connect directly to the MIC Series cameras via the
telemetry connector in MIC Series power supplies. The
converter is connected in 4-wire two-way mode (Full
Duplex), in 2-wire two-way mode (Half Duplex), or in
2-wire one-way mode (Simplex). The converter allows
connection between MIC cameras and either the
Bosch Universal Camera Setup Software (“Cam-set”)
(for MIC models 400AL, 400IR, 400ST, 412, 440, and
500) or Bosch’s Configuration Tool for Imaging
Devices (CTFID) software (for MIC550, MIC550IR,
MIC612); each software application provides full
control of all camera setup and operation functions.
The converter and CamSet software are supplied with
every MIC Series camera prior to model MIC550, but
are also available separately. For models MIC550 and
later, the converter is an available accessory; CTFID is
available for download from www.boschsecurity.com.
Biphase Converters
The MIC Biphase converter cards allow up to eight
MIC Series cameras to be interfaced with Bosch
Biphase compatible equipment. The card translates
Bosch Biphase protocol to RS485, half duplex
telemetry signals. It also allows the camera address to
be set through its integrated DIP switch selector.
The MIC-BP3 has its own enclosure with its own power
supply. This enables it to be used by MIC Series power
supplies that do not have an available expansion slot.
The MIC-BP4 is a plug-in card that fits into an available
expansion slot within a non-infrared MIC Series power
supply unit.
MIC-ALM Alarm and Washer Pump Drive Card
The 8 Input Alarm Card (MIC-ALM) is designed to work
with a MIC Series power supply with a free expansion
slot. The MIC-ALM provides MIC Series cameras with
eight alarm inputs, a washer pump drive function with
test/pump priming capability and two additional relays
which can be configured to operate external
equipment when an alarm signal is received. The card
3 | MIC Series Mounting Brackets and Other Accessories
is compatible with non-infrared MIC Series power
supply units. (The card cannot be used with a MIC
Series IR power supply.)
Washer Kits
The MIC Series washer kits (MIC-WKT, MIC-WKT-IR)
provide the necessary components to allow
connection of a washer pump and water reservoir tank
(sold separately) to a MIC Series camera, and control
via the camera telemetry. (The washer pump, water
reservoir tank, and tubing are sold separately as the
Bosch Washer Kits, models HAC-WAS05-20 and HACWAS30-50. See the datasheet for the Washer Kits for
HSPS and MIC Series for more information.)
Each MIC-WKT kit contains a washer pump drive card
(MIC-WSH), a washer nozzle (MIC-WN), and a
mounting bracket for the washer nozzle (MIC-WMBPCD). Each MIC-WKT-IR kit contains a washer nozzle
(MIC-WN) and a mounting bracket (MIC-WMB-PCD);
the washer pump drive function is built-in to the MIC
Series infrared (IR) power supply units.
The MIC-WSH washer pump drive card fits into an
empty expansion slot of the non-infrared MIC Series
power supply units and provides electrical
connections, a washer pump relay, and a push to test /
pump prime function.
The MIC-WN is a plastic single, jet washer nozzle that
fits to the end of the MIC washer nozzle bracket.
The MIC-WNB-PCD is a stainless steel bracket for
fixing the washer nozzle to the 4-inch PCD base of the
MIC camera in a position that allows cleaning of the
camera lens.
Replacement Wiper Blades
MIC Series accessories also include replacement wiper
blades. The model MIC-RWB is a pivoting metal-backed
rubber wiper blade (dimensions: 36 mm x 13 mm x
3.5 mm) for MIC Series 400 cameras. The models
MIC-412-RWAB (black) and MIC-412-RWAC (silver) are
complete anodized aluminum wiper arms with a fixed
long-life silicone wiper blade and associated hardware.
Wall Mount Bracket
Pole Mount Bracket
Installation/configuration Notes
Corner Mount Bracket
Spreader Plate
4 | MIC Series Mounting Brackets and Other Accessories
MIC440 Sunshield
Deep Conduit Adapter
Shallow Conduit Adapter
MIC-USB485CVTR
Technical specifications
Corner Mount Bracket
MIC412 Sunshield
Dimensions
(W x H x D)
564 x 120 x 394 mm
(23.4 x 4.7 x 15.5 in.)
Weight
2.9 kg (6.5 lb)
Material
Stainless Steel, power coated, with painted polyester
finish as below:
MIC-CMB-B
Black (RAL9005), Leatherette finish
MIC-CMB-W
White (RAL9003), Leatherette finish
MIC-CMB-G
Grey (RAL7001), Leatherette finish
MIC-CMB-S
Stainless Steel, plain finish
MIC-CMB-BD
Black (RAL9005), Sand finish
MIC-CMB-WD
White (RAL9010), Sand finish
MIC-CMB-GD
Grey (RAL9006), Sand finish
5 | MIC Series Mounting Brackets and Other Accessories
Wall Mount Bracket
Material
Dimensions
(W x H x D)
340 x 124 x 120 mm
(13.4 x 4.9 x 4.7 in.)
Weight
Aluminum: 1.95 kg (4.5 lb)
Stainless Steel: 5.4 kg (13.5 lb)
Material
Stainless Steel, or solid aluminum with painted
polyester finish as below:
Stainless Steel, or machined aluminum with painted
finish as below:
MIC-DCA-B
Black (RAL9005), Leatherette finish
MIC-DCA-W
White (RAL9003), Leatherette finish
MIC-DCA-G
Grey (RAL7001), Leatherette finish
MIC-DCA-S
Stainless Steel, plain finish
MIC-WMB-B
Black (RAL9005), Leatherette finish
MIC-DCA-BD
Black (RAL9005), Sand finish
MIC-WMB-W
White (RAL9003), Leatherette finish
MIC-DCA-WD
White (RAL9010), Sand finish
MIC-WMB-G
Grey (RAL7001), Leatherette finish
MIC-DCA-GD
Grey (RAL9006), Sand finish
MIC-WMB-S
Stainless Steel, plain finish
Shallow Conduit Adapter
MIC-WMB-BD
Black (RAL9005), Sand finish
MIC-WMB-WD
White (RAL9010), Sand finish
Dimensions
(H x D)
40 x 120 mm
(1.6 x 4.7 in.)
MIC-WMB-GD
Grey (RAL9006), Sand finish
Weight
Aluminum: 0.78 kg (1.72 lb)
Stainless Steel: 2.22 kg (4.89 lb)
Material
Stainless Steel, or solid aluminum with painted finish as
below:
Pole Mount Bracket
Dimensions
(W x H x D)
127 x 160 x 9.5 mm (25.375 with pole mount blocks
fitted)
(5. x 6.30 x 0.374 in.)
Weight
1.7 kg (3.75 lb)
Material
Mounting bracket, mounting blocks: Aluminum
Banding: Stainless Steel
Finish color
Clear anodized
Spreader Plate
Dimensions
(W x H x D)
190 x 190 x 12.7 mm
(7.48 x 7.48 x 0.5 in.)
Weight
Aluminum: 1.24 kg (2.73 lb)
Stainless Steel: 3.72 kg (8.2 lb)
Material
Stainless Steel, or aluminum, power coated, with
painted finish as below:
MIC-SPR
Black (RAL9005), Leatherette finish
MIC-SPR-W
White (RAL9003), Leatherette finish
MIC-SPR-G
Grey (RAL7001), Leatherette finish
MIC-SPR-S
Stainless Steel, plain finish
MIC-SPR-BD
Black (RAL9005), Sand finish
MIC-SPR-WD
White (RAL9010), Sand finish
MIC-SPR-GD
Grey (RAL9006), Sand finish
Deep Conduit Adapter
Dimensions
(H x D)
90 x 120 mm
(3.5 x 4.7 in.)
Weight
Aluminum: 1.45 kg (3.2 lb)
Stainless Steel: 4.14 kg (9.13 lb)
MIC-SCA-B
Black (RAL9005), Leatherette finish
MIC-SCA-W
White (RAL9003), Leatherette finish
MIC-SCA-G
Grey (RAL7001), Leatherette finish
MIC-SCA-S
Stainless Steel, plain finish
MIC-SCA-BD
Black (RAL9005), Sand finish
MIC-SCA-WD
White (RAL9010), Sand finish
MIC-SCA-GD
Grey (RAL9006), Sand finish
MIC412 Sunshield
Dimensions (W x H x D)
184 mm x 188.5 mm x 125 mm
Weight
0.19 kg (0.42 lb)
MIC440 Sunshield
Dimensions (W x H x D)
157 x 177 x 113 mm
(6.18 x 6.97 x 4.45 in.)
Weight
0.11 kg (0.24 lb)
MIC-USB485CVTR
Weight
0.293 kg
Max Current
100 mA
Isolation
None
Biphase converters
Dimensions (W x H x D)
• MIC-BP3 IP65 Enclosure
120 x 55 x 80 mm
(4.72 x 2.17 x 3.15 in)
• MIC-BP3 Card
60 x 10 x 70 mm
(2.36 x 0.39 x 2.76 in)
6 | MIC Series Mounting Brackets and Other Accessories
• MIC-BP4 Card
60 x 10 x 70 mm
(2.36 x 0.39 x 2.72 in)
Weight
• MIC-BP3 with Power Supply
381 g
• MIC-BP4
35.2 g
Alarm
Inputs
8 with LEDs
Relays
2; Washer Pump Drive Function with prime/test button
Ordering information
MIC-CMB Corner Mount Bracket
Bi-phase Specifications
Shielded 2-wire, half-duplex, multi-drop,
5000 ft cable limit requires 18 AWG wire
Cable Type
Shielded Twisted Pair (STP)
Order number MIC-CMB
Distance
1524 m (5000 ft) Belden 8760
recommended
MIC‑CMB‑B Corner Mount Bracket, Black
Transmission Rate
31.25 kHz
Order number MIC-CMB-B
Gage
1.02 mm (18 AWG)
Termination
110 Ohm
Terminal Connector
Screw terminals
Voltage
4 Vpp
Corner mount bracket - black leatherette finish
RAL9005
Corner mount bracket, black leatherette finish
(RAL9005)
MIC‑CMB‑W Corner Mount Bracket, White
Corner mount bracket, white leatherette finish
(RAL9003)
Order number MIC-CMB-W
MIC‑CMB‑G Corner Mount Bracket, Grey
Wiper Blades
Corner mount bracket, grey leatherette finish (RAL
7001)
MIC Series 400 cameras
Order number MIC-CMB-G
MIC-400-RWAB
black
MIC-400-RWAC
clear
MIC-400-RWAS
316L stainless steel
Dimensions
67 x 15 x 9 mm
MIC-CMB-S Corner Mount Bracket, Silver
Corner mount bracket, grade 316 stainless steel
Order number MIC-CMB-S
MIC-CMB-BD Corner Mount Bracket, Black
Corner mount bracket, black sand finish (RAL9005)
Order number MIC-CMB-BD
MIC Series 412 cameras
MIC-412-RWAB
black
MIC-412-RWAC
clear
Dimensions
104 x 12.7 x 9 mm
MIC-CMB-WD Corner Mount Bracket, White
Corner mount bracket, white sand finish (RAL9010)
Order number MIC-CMB-WD
MIC-CMB-GD Corner Mount Bracket, Grey
Corner mount bracket, grey sand finish (RAL 9006)
MIC Series 440 cameras
Order number MIC-CMB-GD
MIC-440-RWAB
black
MIC-440-RWAC
clear
Wall mount bracket, black leatherette finish (RAL9005)
Dimensions
95 x 12.4 x 9 mm
Order number MIC-WMB-B
MIC‑WMB‑B Wall Mount Bracket, Black
MIC‑WMB‑W Wall Mount Bracket, White
MIC-WKT
Dimensions
(W x H x D)
125 x 25 x 60 mm
(4.92 x 0.98 x 2.36 in.)
Weight
44 g (1.6 oz)
Wall mount bracket, white leatherette finish
(RAL9003)
Order number MIC-WMB-W
MIC‑WMB‑G Wall Mount Bracket, Grey
Wall mount bracket, grey leatherette finish (RAL7001)
MIC-ALM
Order number MIC-WMB-G
Dimension
(H x W x D)
25 x 125 x 60 mm
(0.98 x 4.92 x 2.36 in)
Weight
61 g
Material
PCB Card
MIC‑WMB‑S Wall Mount Bracket, Silver
Wall mount bracket, grade 316 stainless steel
(Requires MIC‑SPR or MIC‑PMB for secure mounting
because of weight.)
Order number MIC-WMB-S
7 | MIC Series Mounting Brackets and Other Accessories
MIC-WMB-BD Wall Mount Bracket, Black
MIC‑DCA‑W Deep Conduit Adapter, White
Wall mount bracket, black sand finish (RAL9005)
Deep conduit adapter for 4 in. PCD base - white
leatherette finish RAL9003
Order number MIC-WMB-BD
MIC-WMB-WD Wall Mount Bracket, White
Order number MIC-DCA-W
Wall mount bracket, white sand finish (RAL9010)
MIC‑DCA‑S Deep Conduit Adapter, Silver
Order number MIC-WMB-WD
Deep conduit adapter for 4 in. PCD base - grade 316
stainless steel, plain finish
MIC-WMB-GD Wall Mount Bracket, Grey
Wall mount bracket, grey sand finish (RAL9006)
Order number MIC-DCA-S
Order number MIC-WMB-GD
MIC-DCA-BD Deep Conduit Adapter, Black
MIC-PMB Pole Mount Bracket
Deep conduit adapter for 4 in. PCD base, black sand
finish (RAL9005)
Pole mount bracket (includes 2 x 455 mm stainless
steel banding straps for pole diameters 75 to 145 mm)
Order number MIC-DCA-BD
Order number MIC-PMB
MIC-DCA-WD Deep Conduit Adapter, White
MIC-SPR Spreader Plate
Deep conduit adapter for 4 in. PCD base, white sand
finish (RAL9010)
Aluminum spreader plate suitable for brickwork
surface mounting – black leatherette finish RAL9005
Order number MIC-DCA-WD
Order number MIC-SPR
MIC-DCA-GD Deep Conduit Adapter, Grey
MIC-SPR-W Spreader Plate, White
Deep conduit adapter for 4 in. PCD base, grey sand
finish (RAL 9006)
Aluminum spreader plate suitable for brickwork
surface mounting, white leatherette finish (RAL9003)
Order number MIC-DCA-GD
Order number MIC-SPR-W
MIC‑SCA‑B Shallow Conduit Adapter, Black
MIC-SPR-G Spreader Plate, Grey
Shallow conduit adapter for 4 in. PCD base - black,
leatherette finish, RAL9005
Aluminum spreader plate suitable for brickwork
surface mounting, grey leatherette finish (RAL7001)
Order number MIC-SCA-B
Order number MIC-SPR-G
MIC‑SCA‑G Shallow Conduit Adapter, Grey
MIC-SPR-S Spreader Plate, Silver
Shallow conduit adapter for 4 in. PCD base - grey,
leatherette finish, RAL7001
316L stainless steel spreader plate suitable for
brickwork surface mounting, plain finish
Order number MIC-SCA-G
Order number MIC-SPR-S
MIC‑SCA‑W Shallow Conduit Adapter, White
MIC-SPR-BD Spreader Plate, Black
Shallow conduit adapter for 4 in. PCD base - white,
leatherette finish, RAL9003
Aluminum spreader plate suitable for brickwork
surface mounting, black sand finish (RAL9005)
Order number MIC-SCA-W
Order number MIC-SPR-BD
MIC‑SCA‑S Shallow Conduit Adapter, Silver
MIC-SPR-WD Spreader Plate, White
Shallow conduit adapter for 4 in. PCD base - grade
316 stainless steel, plain finish
Aluminum spreader plate suitable for brickwork
surface mounting, white sand finish (RAL9010)
Order number MIC-SCA-S
Order number MIC-SPR-WD
MIC-SCA-BD Shallow Conduit Adapter, Black
MIC-SPR-GD Spreader Plate, Grey
Shallow conduit adapter for a MIC-WMB, a MIC-PMB,
or a MIC-SPR, black sand finish (RAL9005)
Aluminum spreader plate suitable for brickwork
surface mounting, grey sand finish (RAL 9006)
Order number MIC-SCA-BD
Order number MIC-SPR-GD
MIC-SCA-WD Shallow Conduit Adapter, White
MIC‑DCA‑B Deep Conduit Adapter, Black
Shallow conduit adapter for a MIC-WMB, a MIC-PMB,
or a MIC-SPR mount, white sand finish (RAL9010)
Deep conduit adapter for 4 in. PCD base - black
leatherette finish, RAL9005
Order number MIC-SCA-WD
Order number MIC-DCA-B
MIC-SCA-GD Shallow Conduit Adapter, Grey
MIC‑DCA‑G Deep Conduit Adapter, Grey
Shallow conduit adapter for a MIC-WMB, a MIC-PMB,
or a MIC-SPR, grey sand finish (RAL 9006)
Deep conduit adapter for 4 in. PCD base - grey
leatherette finish, RAL9010
Order number MIC-SCA-GD
Order number MIC-DCA-G
MIC-GAS Nebar Gasket
Nebar gasket to fit between camera and bracket
Order number MIC-GAS
8 | MIC Series Mounting Brackets and Other Accessories
MICUSB485CVTR2 USB to RS485 Signal Converter
USB to RS485 signal converter to allow MIC Series
cameras to connect to a PC, supplied with each
camera
Order number MICUSB485CVTR2
MIC-BP3 Biphase Converter
Biphase converter for IR power supplies or non-IR
power supplies without a free expansion slot available
Order number MIC-BP3
MIC-BP4 Biphase Converter
Biphase converter for non-IR versions of MIC series
power supply units
Order number MIC-BP4
MIC-516ALM Alarm Card
8 Input alarm card for MIC-516KBD
Order number MIC-516ALM
MIC-ALM Alarm and Washer Pump Drive Card
8 Input alarm and washer pump drive card for PSU
(Not for IR PSU)
Order number MIC-ALM
MIC-WKT Washer Kit
Washer kit for non infrared MIC models (includes
washer pump drive card, washer nozzle and mounting
brackets for wall and 4 in. PCD base)
Order number MIC-WKT
MIC-WKT-IR Washer Kit
Washer kit for infrared power supplies only (includes
washer nozzle and mounting brackets for wall or 4 in.
PCD base)
Order number MIC-WKT-IR
MIC-WN Washer Nozzle
Spare washer nozzle
Order number MIC-WN
MIC-WNB-PCD Washer Nozzle
Spare washer nozzle mounting bracket for 4 in PCD
Base
Order number MIC-WNB-PCD
MIC-WNB-WMB Washer Nozzle
Spare washer nozzle mounting bracket for wall bracket
Order number MIC-WNB-WMB
MIC-RWB Replacement Wiper Blade
Replacement wiper blade (single) for MIC Series
400(AL, Stainless) cameras only
Order number MIC-RWB
MIC-412-RWAB Replacement Wiper Assembly for
MIC412 and MIC612, Black
Replacement silicone wiper assembly (single wiper
blade and associated hardware) for MIC412 and
MIC612 cameras; black.
Order number MIC-412-RWAB
MIC-412-RWAC Replacement Wiper Assembly for
MIC412 and MIC612, Silver
Replacement silicone wiper assembly (single wiper
blade and associated hardware) for MIC412 and
MIC612 cameras; silver.
Order number MIC-412-RWAC
MIC412SUNSHIELD Sunshield Kit for MIC412, White
Sunshield kit for the MIC412 cameras; white.
Order number MIC412SUNSHIELD
MIC440 Sunshield
Sunshield for the MIC440 camera.
Order number MIC440SUNSHIELD
MICTHERSUNSHLD
Sunshield kit for MIC Thermal Cameras, white
Order number MICTHERSUNSHLD
9 | MIC Series Mounting Brackets and Other Accessories
Represented by:
Americas:
Bosch Security Systems, Inc.
130 Perinton Parkway
Fairport, New York, 14450, USA
Phone: +1 800 289 0096
Fax: +1 585 223 9180
[email protected]
www.boschsecurity.us
Europe, Middle East, Africa:
Bosch Security Systems B.V.
P.O. Box 80002
5617 BA Eindhoven, The Netherlands
Phone: + 31 40 2577 284
Fax: +31 40 2577 330
[email protected]
www.boschsecurity.com
© Bosch Security Systems 2012 | Data subject to change without notice
2279980683 | en, V6, 02. Oct 2012
Asia-Pacific:
Robert Bosch (SEA) Pte Ltd, Security
Systems
11 Bishan Street 21
Singapore 573943
Phone: +65 6571 2808
Fax: +65 6571 2699
[email protected]
www.boschsecurity.asia
China:
America Latina:
Bosch (Shanghai) Security Systems Ltd. Robert Bosch Ltda Security Systems Division
201 Building, No. 333 Fuquan Road
Via Anhanguera, Km 98
North IBP
CEP 13065-900
Changning District, Shanghai
Campinas, Sao Paulo, Brazil
200335 China
Phone: +55 19 2103 2860
Phone +86 21 22181111
Fax: +55 19 2103 2862
Fax: +86 21 22182398
al.securitys[email protected]
www.boschsecurity.com.cn
www.boschsecurity.com