Fractal Audio Axe-Fx II Quick Reference Guide

Below you will find brief information for Axe-Fx II. This guide explains the amp and cab block parameters, provides descriptions of amps and cabs, matches amp speaker types with Axe-Fx cabs, sorts CC assignments by function & CC, describes drive blocks and diagrams amp and cab blocks.

PDF Download
Document
Axe-Fx II Quick Reference Guide - Fractal Audio | Manualzz

Advertisement

Advertisement

Advertisement

Key features

  • Amp and Cab block parameters explained
  • Amp and Cab descriptions
  • Amp speaker types matched with Axe-Fx cabs
  • CC assignments sorted by function & CC
  • Drive block descriptions
  • Amp and Cab block diagrams

Frequently asked questions

Input Drive is a knob located closest to the input jack, which affects the frequency response based on its position. Overdrive is a second drive control that only affects the gain and doesn't have a bright cap.

Input Trim is a clean gain control applied to the amp block that adjusts the preamp gain, similar to changing the tube in a real amp. It provides a +/-20 dB range for boost or cut.

Master Volume controls the amount of power amp distortion. As it increases, tone controls have less influence. Most MV amps achieve full volume between 2-4, and further increase compresses the bass and treble, adding mids.
Preparing document for printing…
0%