GE Security
CoverCCTV.qxd
1/31/2005
2:51 PM
Page 1
CCTV catalogue
GE
Security
Contact us :
North
T 01706 716 800
enquiries@visionlinkplus.com
South
T 01743 440 500
sales@visionlinkplus.com
GE Security
www.visionlinkplus.com
CCTV CATALOGUE
In this catalogue you will find a wide range of
CCTV equipment from GE Security.
GE Security is a global technology leader
dedicated to supporting the needs of the rapidly
growing electronic security industry and to
expanding current technologies, products and
GE Security,
unrivalled expertise in
CCTV
services that create revenue growth opportunities
for its customers. As part of the GE family, GE
Security shares the spirit of innovation that has
distinguished GE for well over 100 years.
GE Security's commitment to the ongoing success
of its partners and affiliates means that we
maintain a sharp focus on product and service
innovation, world-class manufacturing practices
and operational excellence.
GE Security is a worldwide organisation with sales
and technical support operations in more than 40
countries, and manufacturing and logistics
operations in Europe, the U.S. and China.
GE Security has expertise in all areas of electronic
security, including:
z
Intrusion and Fire Protection
z
Electronic Access and Facility Management
z
Key Management and Remote Access Systems
and Services
z
Fibre Optic Transmission and Reception
Equipment
z
CCTV, Digital Video and Surveillance Equipment
z
Video Multiplexing and Digital Storage
When you're looking for the finest in CCTV
products with leading-edge technology and the
backing of a world leader, you need look no further
than this catalogue.
SPECIALIST CAMERAS
A range of Discreet CCTV Cameras
and accessories to compliment
our range of standard CCTV products.
Specialist Cameras
Page : 5
TIR-300
330 TVL Day/Night, IP65, Built-In LED's 3.6 mm Lens
These cameras are attractive and easy to install. They are waterproof
and automatically switch on built-in miniature LED's when light levels
drop to illuminate the area within the field of view.
Specifications
Image sensor
1/3" CCD sensor
Horizontal resolution
330 TVL
Lens
3.6 mm / F2
Electronic shutter
1/50 - 1/100,000 sec
Sensitivity
0.5 lux or 0 lux under IR illumination
Gamma
0.45
Video output
Composite: 1 V pk-pk at 75 ohm load
Supply voltage
12 VDC (PSU included)
Power requirements
1.2 W (IR LED off) and 2.8 W (IR LED on)
Effective distance with LEDs
10 m
Waterproof class
IP65
Operating temperature
-10 °C to +50 °C
Dimensions
58.5 x 46.5 x 73.5 mm
Weight
300 g
Ordering Information
TIR-300
TIR-400
TIR-600
330 TVL Day/Night, IP65, Built-In LED's 3.6 mm Lens
Colour, 330 TVL Day/Night, IP68, Built-In LED Illuminators 4
mm Lens
Colour, 330 TVL Day/Night, IP68, Built-In LED Illuminators 6
mm Lens
E
E
E
E
E
E
E
Mounts on wall or ceiling
Light grey aluminium waterproof housing
Good sensitivity
Adjustable camera position
Standard resolution colour
Automatic light sensor to illuminate built-in LEDs
Complete with 12 VDC power supply and bracket
Specialist Cameras
Page : 6
Colour, 330 TVL Day/Night, IP68, Built-In LED Illuminators 4 mm Lens
TIR-400
These cameras are attractive and easy to install. They are waterproof
and automatically switch on built-in miniature LED's when light levels
drop to illuminate the area within the field of view.
Specifications
Image sensor
1/3" CCD sensor
Horizontal resolution
330 TVL
Lens
4 mm / F2.5
Electronic shutter
1/50 - 1/100,000 sec
Sensitivity
0.5 lux or 0 lux under IR illumination
Gamma
0.45
Video output
Composite: 1 V pk-pk at 75 ohm load
Supply voltage
12 VDC (PSU incl.)
Power requirements
2.2 W (IR LED off) and 3.72 W (IR LED on)
Effective distance with LEDs
10 m
Waterproof class
IP68
Operating temperature
-10 °C to +50°C
Dimensions
105 x 65 x 62 mm
Weight
640 g
Ordering Information
TIR-400
TIR-300
TIR-600
Colour, 330 TVL Day/Night, IP68, Built-In LED Illuminators 4
mm Lens
330 TVL Day/Night, IP65, Built-In LED's 3.6 mm Lens
Colour, 330 TVL Day/Night, IP68, Built-In LED Illuminators 6
mm Lens
E
E
E
E
E
E
E
Mounts on wall or ceiling
Light grey aluminium waterproof housing
Good sensitivity
Adjustable camera position
Standard resolution colour
Automatic light sensor to illuminate built-in LEDs
Complete with 12 VDC power supply and bracket
Specialist Cameras
Page : 7
Colour, 330 TVL Day/Night, IP68, Built-In LED Illuminators 6 mm Lens
TIR-600
These cameras are attractive and easy to install. They are waterproof
and automatically switch on built-in miniature LEDs when light levels
drop to illuminate the area within the field of view.
Specifications
Image sensor
1/3" CCD sensor
Horizontal resolution
330 TVL
Lens
6 mm / F2.5
Electronic shutter
1/50 - 1/100,000 sec
Sensitivity
0.5 lux or 0 lux under IR illumination
Gamma
0.45
Video output
Composite: 1 V pk-pk at 75 ohm load
Supply voltage
12 VDC (PSU incl.)
Power requirements
2.2 W (IR LED off) and 3.72 W (IR LED on)
Effective distance with LEDs
10 m
Waterproof class
IP68
Operating temperature
-10 °C to +50 °C
Dimensions
105 x 65 x 62 mm
Weight
640 g
Ordering Information
TIR-600
TIR-300
TIR-400
Colour, 330 TVL Day/Night, IP68, Built-In LED Illuminators 6
mm Lens
330 TVL Day/Night, IP65, Built-In LED's 3.6 mm Lens
Colour, 330 TVL Day/Night, IP68, Built-In LED Illuminators 4
mm Lens
E
E
E
E
E
E
E
Mounts on wall or ceiling
Light grey aluminium waterproof housing
Good sensitivity
Adjustable camera position
Standard resolution colour
Automatic light sensor to illuminate built-in LEDs
Complete with12 VDC power supply and bracket
Specialist Cameras
Page : 8
CW-320
IP65 Indoor Mini Wedge 380 TVL Mono Camera 4 mm lens
Due to its compact size and modern looking aesthetics, this is a highly
attractive mini camera. This high definition monochrome camera is
manufactured from resilient light weight ABS material.
Specifications
Image sensor
1/3" CCD sensor
Horzontal resolution
>380 TVL
Electronic shutter
Automatic linear shutter
Sensitivity
0.2 lux
Video output
Composite: 1 V pk-pk at 75 ohm load
Supply voltage
12 VDC + 10%
Operating temperature
-10 °C to +40 °C
Weight
85 g
Ordering Information
CW-320
CW-520
CW-620
IP65 Indoor Mini Wedge 380 TVL Mono Camera 4 mm lens
IP65 Indoor Mini Wedge 560 TVL Mono Camera 4mm
IP65 Indoor Mini Wedge 330 TVL Colour Camera 4 mm
E Light grey miniature case for maximum discretion
E Blends inconspicuously into any domestic or
commercial environment
E Wall or ceiling mountable
E Flying leads with connectors fitted as standard for ease
of installation
E Comes with free power supply
E Comes with lint-free cleaning cloth to remove grease
and dirt from case and lens
E Lens : 4 mm standard
Specialist Cameras
Page : 9
IP65 Indoor Mini Wedge 450 TVL Colour to Mono Day/Night Camera
CW-720DN
Due to its compact size and modern looking aesthetics, this is a highly
attractive mini camera. This high resolution colour/mono (day/night)
camera is manufactured from resilient light weight ABS material.
Specifications
High resolution monochrome to
colour camera
Image sensor
1/3" CCD sensor
Horizontal resolution
>450 TVL
Electronic shutter
Automatic linear shutter
Filter
Automatic IR cut out filter
Sensitivity
0.1 lux
Video output
Composite: 1 V pk-pk at 75 ohm load
Supply voltage
12 VDC + 10%
Operating temperature
-18 °C to +60 °C
Weight
85 g
Ordering Information
CW-720DN
IP65 Indoor Mini Wedge 450 TVL Colour to Mono Day/Night
Camera
E
E
E
E
Automatically switches from colour to monochrome
Automatic IR cut filter
Y/C output, ext/int sync
Light grey miniature case for maximum discretion
E Blends inconspicuously into any domestic or
commercial environment
E Wall or ceiling mountable
E Flying leeds with connectors fitted as standard for ease
of installation
E Comes with lint-free cleaning cloth to remove grease
and dirt from case and lens
E Comes with free power supply
E Lens : 4 mm standard
Specialist Cameras
Page : 10
PD-43VC
1/3'' Colour 460 TVL 2.0 Lux Varifocal 3.5-8 mm lens 12 VDC
A compact minidome designed to house a high definition colour
camera with varifocal lens. It can be used as an alternative to
conventional camera, lens and bracket combinations and is suitable
for applications in retail, banking, hotels, offices, etc.
Specifications
Image device
1/3'' Super HAD CCD
Signal system
PAL
Picture elements
795 x 596
Scanning system
625 lines 2:1 Interlace
Sync system
Internal lock
Horizontal resolution
460 TVL
Sensitivity
2 lux at F1.6
S/N ratio
Better than 48 dB
Auto iris mode
1/50 sec
Focal length
3.5 - 8 mm
Iris range
F1.6-360
Backlight compensation
Operating temperature
Auto detect on/of; Histogram plus 225 areas window
weight
-10 °C to +50 °C
Supply voltage
12 VDC
Power consumption
3.5 W
Dimensions
140 x 88 mm
E Discreet minidome design for indoor use
E Easy installation
E Flexible built-in varifocal auto-iris lens for versatile
Ordering Information
environment applications
E Camera mounted on manually adjustable miniature
PD-33VC
PD-43VC
PD-39VC
PD-49VC
1/3'' Colour 380 TVL 2.0 Lux Varifocal 3.5-8 mm lens 12 VDC
1/3'' Colour 460 TVL 2.0 Lux Varifocal 3.5-8 mm lens 12 VDC
1/3'' Colour 380 TVL 2.0 Lux Varifocal 9-22mm lens 12 VDC
1/3'' Colour 460 TVL 2.0 Lux Varifocal 9-22mm lens 12 VDC
'swivel and tilt' cradle, for exact camera positioning
E Advanced camera functions, including ATW/AWB, BLC
on/off
Specialist Cameras
Page : 11
1/3'' Colour 480 TVL 2.0 Lux Fixed 4.0 mm Lens 12 VDC
PD-44C
A compact minidome designed to house a high definition colour
camera. It can be used as an alternative to conventional camera, lens
and bracket combinations and is suitable for applications in retail,
banking, hotels, offices, etc.
Specifications
Image device
1/3'' Super HAD CCD
Signal system
PAL
Picture elements
795 x 596
Scanning system
625 lines 2:1 Interlace
Sync system
Internal lock
Horizontal resolution
480 TVL
Sensitivity
2 lux at F2.0
S/N ratio
Better than 50 dB
AE CCD iris mode
1/50-1/100,000 sec
Focal length
4.0 mm F2.0
Backlight compensation
Auto Detect BLC
Video output signal
1.0 V pk-pk
Operating temperature
-10 °C to +50 °C
Supply voltage
12 VDC
Power consumption
3.5 W
Dimensions
125 x 64 mm
Ordering Information
PD-43M
PD-63M
PD-34C
PD-44C
1/3'' Mono 420 TVL 0.4 Lux Fixed 4 mm lens 12 VDC
1/3'' Mono 600 TVL 0.4 Lux Fixed 4.0 mm lens 12 VDC
1/3'' Colour 380 TVL 2.0 Lux Fixed 4.0 mm lens 12 VDC
1/3'' Colour 480 TVL 2.0 Lux Fixed 4.0 mm Lens 12 VDC
E Discreet minidome design for indoor use
E Quick release mount for easy servicing and installation
E Camera mounted on manually adjustable miniature
'swivel and tilt' cradle, for exact camera positioning
Specialist Cameras
Page : 12
IP65 Vandal Resistant Ceiling mount 1/3" Mono 380 TVL Fixed 4 mm lens
VR4-310
Specifications
Image sensor
1/3" CCD sensor
Horizontal resolution
>380 TVL
Lens
Fixed manual 4 mm lens
Electronic shutter
Automatic linear shutter
Sensitivity
0.3 lux
Video output
Composite: 1 V pk-pk at 75 ohm load
Supply voltage
12 VDC + 10%
Operating temperature
-10 °C to +40 °C
Ordering Information
VR4-310
VR4-610
IP65 Vandal Resistant Ceiling mount 1/3" Mono 380 TVL
Fixed 4 mm lens
IP65 Vandal Resistant ceiling mount 1/3" Colour 330 TVL
E Ceiling mount
E Light grey steel housing with 4 mm polycarbonate
viewing window
E
E
E
E
E
Good sensitivity
Adjustable camera position
Standard resolution monochrome
4 mm fixed lens standard
Complete with12 VDC power supply
Specialist Cameras
Page : 13
IP65 Vandal Resistant Corner mount 1/3" Mono 380 TVL Fixed 4 mm lens
VR4-320
Specifications
Image sensor
1/3" CCD sensor
Horizontal resolution
>380 TVL
Lens
Fixed manual 4 mm lens
Electronic shutter
Automatic linear shutter
Sensitivity
0.3 lux
Video output
Composite: 1 V pk-pk at 75 ohm load
Supply voltage
12 VDC + 10%
Operating temperature
-10 °C to +40 °C
Ordering Information
VR4-320
VR4-620
IP65 Vandal Resistant Corner mount 1/3" Mono 380 TVL
Fixed 4 mm lens
IP65 Vandal Resistant Corner mount 1/3" Colour 330 TVL
E Corner mount
E Light grey steel housing with 4 mm polycarbonate
viewing window
E
E
E
E
E
Good sensitivity
Adjustable camera position
Standard resolution monochrome
4 mm fixed lens standard
Complete with 12 VDC power supply
Specialist Cameras
Page : 14
Indoor Vandal Resistant 380 TVL 4 mm Mono Corner Mount Camera
VCM-300
A tough steel case and polycarbonate viewing window encase a
standard definition monochrome camera with a 4 mm fixed lens
mounted on a tilt and pivot mechanism enabling exact viewing set up.
Specifications
Image sensor
1/3" CCD sensor
Horizontal resolution
>380 TVL
Lens
Fixed manual 4 mm lens
Electronic shutter
Automatic linear shutter
Sensitivity
0.3 lux
Video output
Composite: 1 V pk-pk at 75 ohm load
Supply voltage
12 VDC + 10%
Operating temperature
-10 °C to +40 °C
Ordering Information
VCM-300
VCM-600
Indoor Vandal Resistant 380 TVL 4 mm Mono Corner Mount
Camera
Indoor Vandal Resistant 330 TVL 4 mm Colour Corner Mount
Camera
E Mounts in corner
E Light grey steel housing with 4 mm polycarbonate
viewing window
E
E
E
E
E
Good sensitivity
Adjustable camera position
Standard resolution monochrome
4 mm fixed lens standard
Complete with12 VDC power supply
Specialist Cameras
Page : 15
Indoor Vandal Resistant 330 TVL 4 mm Colour Corner Mount Camera
VCM-600
A tough steel case and polycarbonate viewing window encase a
standard definition colour camera with a 4 mm fixed lens mounted on
a tilt and pivot mechanism enabling exact viewing set up.
Specifications
Image sensor
1/3" CCD sensor
Horizontal resolution
>330 TVL
Lens
Fixed manual 4 mm lens
Electronic shutter
Automatic linear shutter
Sensitivity
1.5 lux
Video output
Composite: 1 V pk-pk at 75 ohm load
Supply voltage
12 VDC + 10%
Operating temperature
-10 °C to +40 °C
Ordering Information
VCM-600
VCM-300
Indoor Vandal Resistant 330 TVL 4 mm Colour Corner Mount
Camera
Indoor Vandal Resistant 380 TVL 4 mm Mono Corner Mount
Camera
E Mounts in corner
E Light grey steel housing with 4 mm polycarbonate
viewing window
E
E
E
E
E
Good sensitivity
Adjustable camera position
Standard resolution colour
4 mm fixed lens standard
Complete with12 VDC power supply
Specialist Cameras
Page : 16
VCM-700V
Indoor Vandal Resistant 450 TVL Varifocal Colour Corner
A tough steel case and polycarbonate viewing window encase a high
resolution colour camera with a varifocal lens mounted on a tilt and
pivot mechanism enabling exact viewing set up.
Specifications
Image sensor
1/3" CCD sensor
Horizontal resolution
>450 TVL
Lens
Varifocal lens manual - adjustable from 2.6 to 5.6mm
Electronic shutter
Automatic linear shutter
Sensitivity
1.5 lux
Video output
Composite: 1 V pk-pk at 75 ohm load
Supply voltage
12 VDC + 10%
Operating temperature
-18 °C to +60 °C
Ordering Information
VCM-700V
VCM-500V
Indoor Vandal Resistant 450 TVL Varifocal Colour Corner
Indoor Vandal Resistant 560 TVL Varifocal Mono Corner
E Mounts in corner
E Light grey steel housing with 4 mm polycarbonate
viewing window
E
E
E
E
E
Good sensitivity
Adjustable camera position
High resolution colour
Varifocal lens - adjustable from 2.6 to 5.6 mm
Complete with12 VDC power supply
Specialist Cameras
Page : 17
BC-600
Ball Camera, Colour, 330 TVL, 4 mm lens
The ball camera is designed to be mounted on the ceiling or wall and
can be turned through 360 degrees to allow for the most optimum
viewing position. It is an attractive camera that blends discreetly into
many environments.
Specifications
Image sensor
1/3" CCD sensor
Horizontal resolution
>330 TVL
Electronic shutter
Automatic linear shutter
Sensitivity
1.5 lux
Video output
Composite: 1 V pk-pk at 75 ohm load
Supply voltage
12 VDC + 10%
Operating temperature
-10° to +40°C
Weight
165 g
Ordering Information
BC-600
BC-300
BC-500
Ball Camera, Colour, 330 TVL, 4 mm lens
Ball camera, mono, 380 TVL, 4 mm lens
Ball camera, mono, 520TVL, 4mm lens
E Superb picture quality
E Light grey casing
E Infinitely adjustable - 350° horizontal, 90° vertical
E Cables feed directly into wall or ceiling so cannot be
tampered with
E
E
E
E
Easily mounts over single gang electrical wall box
Comes with free power supply unit
Lens : 4 mm standard
Indoor use
Specialist Cameras
Page : 18
CL-600
Clock Camera Colour, 1/3", 330 TVL, 3.6 mm PH Lens
Miniature, pinhole lens cameras concealed inside working office clocks.
Ideal for covert surveillance in any office or business environment.
Specifications
Image sensor
1/3" CCD sensor
Horizontal resolution
>330 TVL
Electronic shutter
Automatic linear shutter
Sensitivity
1.5 lux
Video output
Composite: 1 V pk-pk at 75 ohm load
Supply voltage
12 VDC + 10%
Operating temperature
-10° to +40°C
Weight
520 g
Ordering Information
CL-600
CL-300
Clock Camera Colour, 1/3", 330 TVL, 3.6 mm PH Lens
Clock camera mono, 1/3" 380TVL, 3.6mm PH lens
E Undetectable pinhole camera enables completely
covert surveillance
E Clock back-plate conceals camera whilst allowing easy
battery replacement and time adjustment
E Comes with lint-free cleaning cloth to remove grease
and dirt from case and lens
E Comes with free power supply
E Lens : 3.6 mm pinhole
Specialist Cameras
Page : 19
JB-650/P
Junction Box Camera Colour, 330 TVL, 3.6 mm PH Lens
One of a range of covert cameras designed for the professional
security installer using the latest miniature camera technology.
Specifications
Image sensor
1/3" CCD sensor
Horizontal resolution
>330 TVL
Electronic shutter
Automatic linear shutter
Sensitivity
1.5 lux
Video output
Composite: 1 V pk-pk at 75 ohm load
Supply voltage
12 VDC + 10%
Operating temperature
-10° to +40°C
Weight
325 g
Ordering Information
JB-650/P
JB-350/P
Junction Box Camera Colour, 330 TVL, 3.6 mm PH Lens
Junction box camera mono, 380 TVL, 3.6 mm PH Lens
E Tough, die-cast aluminium housing
E A very popular and effective covert camera
E Blends into many industrial or commercial
environments
E Comes with free power supply
E Comes with lint-free cleaning cloth to remove grease
and dirt from case and lens
E Lens : 3.6 mm pinhole
Specialist Cameras
Page : 20
PI-340
Sharpshooter standard resolution monochrome PIR case camera
Specifications
Image sensor
1/3" CCD sensor
Horizontal rfesolution
380 TV lines or greater
Electronic shutter
Automatic linear shutter
Sensitivity
0.3 lux
Video output
CCIR, 1V pk-pk, 75 Ohms
Supply voltage
12 VDC + 10%
Operating temperature
-18°C to + 60°C
Weight
140 g
Ordering Information
PI-340
PI-540
PI-640
PI-740
PI-X40/B
Sharpshooter standard resolution monochrome PIR case
camera
Sharpshooter standard resolution monochrome PIR case
camera
Sharpshooter standard resolution colour PIR case camera
Sharpshooter high resolution colour PIR case camera
Ceiling mount bracket (optional)
E Unique bracket for wall or corner mounting
E Off white case
E Ceiling mount bracket also available
E Standard rather than pinhole lens gives superior
performance in low light conditions
E Smoked window material
E Comes with free power supply
E Comes with lint-free cleaning cloth to remove grease
and dirt from case and lens
E Lens : 4mm standard, others available on request
E Non working PIR
Specialist Cameras
Page : 21
PI-390/P
Indoor standard resolution monochrome PIR case camera
Specifications
Image sensor
1/3" CCD sensor
Horizontal resolution
380 TV lines or greater
Electric shutter
Automatic linear shutter
Sensitivity
0.3 lux
Video output
CCIR, 1V pk-pk, 75 Ohms
Supply voltage
12 VDC + 10%
Operating temperature
-18°C to +60°C
Weight
190 g
Ordering Information
PI-390/P
PI-390/PW
PI-690/P
Indoor standard resolution monochrome PIR case camera
Indoor standard resolution monochrome working PIR
camera
Indoor standard resolution colour PIR case camera
E Off white casing
E Superb picture quality
E Camera views through tiny 1.5mm diameter hole for
maximum covertness
E Comes with free multi-directional wall/corner-mount
bracket
E Comes with free power supply
E Comes with lint-free cleaning cloth to remove grease
and dirt from case and lens
E Lens : 3.6mm pinhole standard
Specialist Cameras
Page : 22
PI-610VR
IP65 vandal-resistant PIR Camera Colour, 330 TVL, 4 mm lens
A standard definition colour camera mounted on a swivel and tilt
gimbal, encased in a discreet, heavy-duty housing with tough
polycarbonate viewing window. A low-cost, flexible solution to many
outdoor CCTV applications.
Specifications
Image sensor
1/3" CCD sensor
Horizontal resolution
>330 TVL
Electronic shutter
Automatic linear shutter
Sensitivity
1.5 lux
Video output
Composite: 1 V pk-pk at 75 ohm load
Supply voltage
12 VDC + 10%
Operating temperature
-10° to +40°C
Weight
715 g
Ordering Information
PI-610VR
PI-310VR
IP65 vandal-resistant PIR Camera Colour, 330 TVL, 4 mm
lens
IP65 VR Dummy PIR camera mono, 380 TVL, 4 mm lens
E Superb picture quality
E Heavy-duty, off white powder-coated, die-cast
aluminium housing with smoked polycarbonate
viewing window
E Multi-directional wall/corner-mount bracket available
E Screw-entry conduit point for vandal-resistant cabling
E Camera module mounted on a manually adjustable
'swivel and tilt' cradle for exact camera positioning
E Lens : 4 mm standard
E Tamperproof screws
Specialist Cameras
Page : 23
SD-600
Side viewing Smoke Detector Camera Colour, 330 TVL, 4 mm Lens
A miniature camera concealed inside a unique purpose built smoke
detector case providing a side viewing.
Specifications
Image sensor
1/3" CCD sensor
Horizontal resolution
>330 TVL
Electronic shutter
Automatic linear shutter
Sensitivity
1.5 lux
Video output
Composite: 1 V pk-pk at 75 ohm load
Supply voltage
12 VDC + 10%
Operating temperature
-10° to +40°C
Weight
155 g
Ordering Information
SD-600
SD-300
Side viewing Smoke Detector Camera Colour, 330 TVL, 4 mm
Lens
Side viewing Smoke Detector Camera mono, 380 TVL, 4 mm
lens
E Camera completely concealed behind a unique
one-way viewing mesh
E Camera mounted on a manually adjustable `swivel and
tilt` cradle to enable exact camera positioning
E Housings conceals a vertical-viewing camera with
pinhole lens
E Comes with free power supply
E Comes with lint-free cleaning cloth to remove grease
and dirt from case and lens
E Lens : 3.6 mm (pinhole)
Specialist Cameras
Page : 24
Vertical viewing Smoke Detector Camera Colour, 330 TVL, 3.6 mm PH Lens
SD-600/P
A miniature camera concealed inside a unique purpose built smoke
detector case with a pinhole lens for vertical viewing.
Specifications
Image sensor
1/3" CCD sensor
Horizontal resolution
>330 TVL
Electronic shutter
Automatic linear shutter
Sensitivity
2.5 lux
Video output
Composite: 1 V pk-pk at 75 ohm load
Supply voltage
12 VDC + 10%
Operating temperature
-18 °C to +60 °C
Weight
155 g
Ordering Information
SD-600/P
SD-300/P
Vertical viewing Smoke Detector Camera Colour, 330 TVL, 3.6
mm PH Lens
Vertical viewing Smoke Detecror Camera mono, 380TVL,
3.6mm PH lens
E Camera completely concealed behind a unique
one-way viewing mesh
E Camera mounted on a manually adjustable `swivel and
tilt` cradle to enable exact camera positioning
E Housings conceals a vertical-viewing camera with
pinhole lens
E Comes with free power supply
E Comes with lint-free cleaning cloth to remove grease
and dirt from case and lens
E Lens : 3.6 mm (pinhole)
Specialist Cameras
Page : 25
1/4"Rugged hi-res colour dome 2.8-5.8mm A/I Varifocal Lens,12 VDC or 24 VAC
ARD-682P
The weatherproof, vandal resistant rugged dome features a die-cast
housing, an impact-resistant Lexan dome, tamperproof screws and a
hinged cover for easy setup. A durable gasket on the base of the
rugged dome provides a watertight seal to protect the camera. It will
withstand temperatures ranging from -10 °C to +50 °C.
Specifications
Image sensor
1/4-in. interline transfer Sony super HAD CCD
Resolution
460 TVL
Sensitivity
0.3 Lux @ F1.4
Picture elements
795 x 596
Scanning system
625 lines, 50 fields PAL
Signal-to-noise ratio
Better than 50 dB (AGC off) AGC: Max. 36 dB
Synchronisation
Internal / line lock AC (phase adjustable)
Gamma compensation
0.45
Video output
1.0 V pk-pk at 75 ohm load
Electronic shutter
1/50 - 1/100,000 sec
Supply voltage
10 to 40 VDC or 18 to 30 VAC
Power consumption
1.5 W at 12 VDC
Operating temperature
-10 °C to +50 °C
Weight
820 g
Dimensions
136 x 102 mm
Ordering Information
ARD-682P
ARD-382C
ARD-982P
1/4"Rugged hi-res colour dome 2.8-5.8mm A/I Varifocal
Lens,12 VDC or 24 VAC
1/4" Rugged hi-res mono dome 2.8-5.8mm A/I varifocal lens,
12 VDC or 24 VAC
1/4"Rugged hi-res col/mono dome 2.8-5.8mm A/I varifocal
lens,12 VDC or 24 VAC
E Weatherproof housing
E Tamperproof screws and a Lexan dome for vandal
resistance
E Hinged cover for easy adjustment and setup
E High-resolution monochrome camera
E 2.8 to 5.8 mm varifocal auto-iris lens option
Specialist Cameras
Page : 26
1/3"Rugged 480 TVL Colour Dome 3.5-8 mm A/I Varifocal Lens,12 VDC or 24 VAC
ARD2-682P
The weatherproof, vandal resistant rugged dome features a new
design of die-cast housing, an impact-resistant Lexan dome,
tamperproof screws and a hinged cover for easy setup. A durable
gasket on the base of the rugged dome provides a watertight seal to
protect the camera. It will withstand temperatures ranging from -10
°C to +50 °C.
Specifications
Image sensor
1/3-in. interline transfer Sony super HAD CCD
Resolution
480 TVL
Sensitivity
2 Lux @ F1.6
Picture elements
795 x 596
Scanning system
625 lines, 50 fields PAL
Signal-to-noise ratio
Better than 48 dB (AGC off) AGC: Max. 36 dB
Synchronisation
Internal / line lock AC (phase adjustable)
Gamma compensation
0.45
Video output
1.0 V pk-pk at 75 ohm load
Electronic shutter
1/50 - 1/100,000 sec
Supply voltage
10 to 40 VDC or 18 to 30 VAC
Power consumption
3.5 W at 12 VDC
Operating temperature
-10 °C to +50 °C
Weight
820 g
E New stylish design
E Weatherproof housing
Dimensions
149 x 102 mm
E Tamperproof screws and a Lexan dome for vandal
resistance
Ordering Information
ARD2-682P
ARD2-662P
ARD2-XDNP
1/3"Rugged 480 TVL Colour Dome 3.5-8 mm A/I Varifocal
Lens,12 VDC or 24 VAC
1/3"Rugged 380TVL colour dome 3.5-8 mm A/I varifocal
lens,12 VDC or 24 VAC
1/4" Rugged 480TVL Col D/N dome 2.8-5.8mm A/I varifocal
lens,12 VDC or 24 VAC
E Hinged cover for easy adjustment and setup
E High resolution color camera
E 3.5 to 8 mm varifocal auto-iris lens option
PROFESSIONAL CAMERAS
The GE Security range of cameras are designed to meet today's
most demanding surveillance requirements.
Professional Cameras
Page : 29
AR-163C
1/3" 420 TVL, 0.1 lux mono camera, 85 to 264 VAC
While combining exceptional performance and budgetary constraints,
this mains voltage AR-163C monochrome camera is designed to meet
today's demanding surveillance requirements.
Specifications
Image sensor
1/3" CCD sensor
Signal system
CCIR
Picture elements
537 x 597
Scanning system
625 lines
Sync system
Internal/line lock
Horizontal res
420 TV lines
Sensitivity
0.1 lux at F1.2
Gain
AGC
S/N ratio
Better than 48dB
Auto exp system
Back light comp
CCD iris mode: 1/50 - 1/100,000 sec continously
variable
Yes
Gamma
On = 0.45
Video output signal
Composite: 1V pk-pk at 75 Ohm load
Auto iris lens
Accepts video and DC drive iris lens
Lens mount
C & CS mount
Operating temperature
-10°C to + 50°C'
Supply voltage
85 to 264 VAC
Dimensions
57 x 52 x 110mm
Ordering Information
AR-163C
AR-162C
1/3" 420 TVL, 0.1 lux mono camera, 85 to 264 VAC
1/3" 420 TVL, 0.1 lux mono camera, 12 VDC - 24 VAC
E
E
E
E
E
E
E
High picture quality
Super AGC (36 dB)
Smart Auto back light compensation (BLC)
Video drive, direct drive electronic iris control
line-lock
Isolated switching power supply unit
Switchable gamma
Professional Cameras
Page : 30
1/3" 450 TVL, 0.1 Lux (F1.2) Mono st-res Digital Camera, 12 VDC or 24 VAC
KTC-510P
The new range of CamPlus cameras from GE Security comes complete
with a host of new features. Thumbwheel back focus adjustment and a
stylish new case design with recessed lens socket and concealed
control panel. The optional PlusPack further increases their versatility.
Using Hyper-HAD CCD sensor technology, the sensitivity of these
models is excellent, around 0.1 lux (@F1.2), with low noise. Where
necessary the super AGC boosts the video signal by another 6 db.
Smart Backlight Compensation (BLC) is achieved by a combination of
histogram and windows weighted integration of 225 separate
windows.
While combining exceptional performance and budgetary constraints,
the range of CamPlus cameras is designed to meet today's most
demanding surveillance requirements.
Specifications
Image sensor
1/3" CCD sensor
Signal system
CCIR
Picture elements
537 x 597
Scanning system
625 lines
Sync system
Internal/line lock
Horizontal resolution
450 TVL
Sensitivity
0.1 lux at F1.2
Gain
Super AGC 36 dB
Signal-to noise ratio
Better than 48 dB
Auto exposure system
Gamma
CCD iris mode: 1/50 - 1/100,000 sec continuously
variable
Auto detect, histogram plus 225 areas windows
weight
On = 0.45 Off = 1
Video output signal
Composite: 1 V pk-pk at 75 ohm load
Auto iris lens
Accepts video and DC drive iris lens
Lens mount
C & CS mount
Operating temperature
-10 °C to + 50 °C
Supply voltage
12 VDC or 24 VAC (KTC-511P: 85 to 264 VAC)
Dimensions
140x70x50mm
Back light compensation
Ordering Information
KTC-510P
KTC-511P
1/3" 450 TVL, 0.1 Lux (F1.2) Mono st-res Digital Camera, 12
VDC or 24 VAC
1/3" 450 TVL, 0.1 Lux (F1.2) Monochrome Digital Camera, 85
to 264 VAC
E
E
E
E
E
E
E
E
E
E
E
E
Standard resolution monochrome camera
Exclusive case design
DC and auto-iris compatible
1/3'' HyperHAD CCD
450 TVL resolution
0.1 Lux sensitivity
Smart backlight compensation
Thumbwheel back focus adjustment
Recessed lens connector
Local video test monitor output (extra BNC connector)
C and CS mount
Optional PlusPack for UTP video output
Professional Cameras
Page : 31
1/3" 600 TVL, 0.1 lux (F1.2) Mono hi-res Digital Camera, 12 VDC or 24 VAC
KTC-515P
The new range of CamPlus cameras from GE Security comes complete
with a host of new features. Thumbwheel back focus adjustment and a
stylish new case design with recessed lens socket and concealed
control panel. The optional PlusPack further increases their versatility.
Using Hyper-HAD CCD sensor technology, the sensitivity of these
models is excellent, around 0.1 lux (@F1.2), with low noise. Where
necessary the super AGC boosts the video signal by another 6 db.
Smart Backlight Compensation (BLC) is achieved by a combination of
histogram and windows weighted integration of 225 separate
windows.
While combining exceptional performance and budgetary constraints,
the range of CamPlus cameras is designed to meet today's most
demanding surveillance requirements.
Specifications
Image sensor
1/3" CCD sensor
Signal system
CCIR
Picture elements
795 x 596
Scanning system
625 lines
Sync system
Internal/line lock
Horizontal resolution
600 TVL
Sensitivity
0.1 lux at F1.2
Gain
Super AGC 36 dB
Signal-to-noise ratio
Better than 48 dB
Auto exposure system
Gamma
CCD iris mode: 1/50 - 1/100,000 sec continuously
variable
Auto detect, histogram plus 225 areas windows
weight
On = 0.45 Off = 1
Video output signal
Composite: 1 V pk-pk at 75 ohm load
Auto iris lens
Accepts video and DC drive iris lens
Lens mount
C & CS mount
Operating temperature
-10 °C to +50 °C
Supply voltage
12 VDC or 24 VAC (KTC-516: 85 to 264 VAC)
Dimensions
140x70x50mm
Back light compensation
Ordering Information
KTC-515P
KTC-516P
1/3" 600 TVL, 0.1 lux (F1.2) Mono hi-res Digital Camera, 12
VDC or 24 VAC
1/3" 600 TVL, 0.1 lux (F1.2) Mono hi-res Digital Camera, 85 to
264 VAC
E
E
E
E
E
E
E
E
E
E
E
E
High resolution monochrome camera
Exclusive case design
DC and auto-iris compatible
1/3'' HyperHAD CCD
600 TVL resolution
0.1 Lux sensitivity
Smart backlight compensation
Thumbwheel back focus adjustment
Recessed lens connector
Local video test monitor output (extra BNC connector)
C and CS mount
Optional PlusPack for UTP video output
Professional Cameras
Page : 32
1/3" 600 TVL,0.01 lux(F1.2) Mono ExView IR Digital Camera,12 VDC or 24 VAC
KTC-540EP
The new range of CamPlus cameras from GE Security comes complete
with a host of new features. Thumbwheel back focus adjustment and a
stylish new case design with recessed lens socket and concealed
control panel. The optional PlusPack further increases their versatility.
Using Exview HAD CCD sensor technology, the sensitivity of these
models is excellent, around 0.01 lux (@F1.2), with low noise and infrared
sensitivity. Where necessary the super AGC boosts the video signal by
another 6 db.
Smart Backlight Compensation (BLC) is achieved by a combination of
histogram and windows weighted integration of 225 separate
windows.
While combining exceptional performance and budgetary constraints,
the range of CamPlus cameras is designed to meet today's most
demanding surveillance requirements.
Specifications
Image sensor
1/3" Exview CCD sensor
Signal system
CCIR
Picture elements
795 x 596
Scanning system
625 lines
Sync system
Internal/line lock
Horizontal resolution
600 TVL
Sensitivity
0.01 lux at F 1.2
Gain
Super AGC 36 dB
S/N ratio
Better than 48 dB
Auto exposure system
Gamma
CCD iris mode: 1/50 - 1/100,000 sec continuously
variable
Auto detect, histogram plus 225 areas windows
weight
On = 0.45 Off = 1
Video output signal
Composite: 1 V pk-pk at 75 ohm load
Auto iris lens
Accepts video and DC drive iris lens
Lens mount
C & CS mount
Operating temperature
-10 °C to +50 °C
Supply voltage
12 VDC or 24 VAC (KTC-541EP: 85 to 264 VAC)
Dimensions
140x70x50mm
Back light compensation
Ordering Information
KTC-540EP
KTC-541EP
1/3" 600 TVL,0.01 lux(F1.2) Mono ExView IR Digital Camera,12
VDC or 24 VAC
1/3" 600 TVL,0.01 lux(F1.2) Mono Exview IR Digital Camera, 8
E High resolution monochrome Exview camera with
infrared sensitivity
E
E
E
E
E
E
E
E
E
E
E
E
Exclusive case design
Discrete DIP switch adjustment
1/3'' Exview HAD CCD
600 TVL resolution
0.01 Lux sensitivity
Smart backlight compensation
Thumbwheel back focus adjustment
Recessed lens connector
Local video test monitor output (extra BNC connector)
C and CS mount
DC and auto-iris compatible
Optional PlusPack for UTP video output
Professional Cameras
Page : 33
1/3" 380 TVL, 0.5 lux (F1.2) Colour Digital Camera, 12 VDC or 24 VAC
KTC-810CP
The new range of CamPlus cameras from GE Security comes complete
with a host of new features. Thumbwheel back focus adjustment and a
stylish new case design with recessed lens socket and concealed
control panel.The optional PlusPack further increases their versatility.
Using Hyper-HAD CCD sensor technology, the sensitivity of these
models is excellent, around 0.5 lux (@F1.2), with low noise. Where
necessary the super AGC boosts the video signal by another 6 db.
Smart Backlight Compensation (BLC) is achieved by a combination of
histogram and windows weighted integration of 225 separate
windows.
While combining exceptional performance and budgetary constraints,
the range of CamPlus cameras is designed to meet today's most
demanding surveillance requirements.
The advanced Auto Tracking White balance (ATW) ensures that colour
images remain natural, iris gain and white balance is simultaneously
controlled so that a clear image is produced even under extreme
lighting conditions.
Medium resolution colour camera
Image sensor
1/3" CCD sensor
Signal system
CCIR
Picture elements
542 x 582
Scanning system
625 lines
Sync system
Internal/line lock
E
E
E
E
E
E
E
Horizontal resolution
380 TVL
E Auto tracking white and automatic white balance
Sensitivity
0.5 lux at F1.2
Gain
Super AGC 36 dB
S/N ratio
Better than 48 dB
Auto exposure system
Gamma
CCD iris mode: 1/50 - 1/100,000 sec continuously
variable
Auto detect, histogram plus 225 areas windows
weight
On = 0.45 Off = 1
Video output signal
Composite: 1 V pk-pk at 75 ohm load
Auto iris lens
Accepts video and DC drive iris lens
Lens mount
C & CS mount
Operating temperature
-10 °C to +50 °C
Supply voltage
12 VDC or 24 VAC (KTC-811CP: 85 to 264 VAC)
Dimensions
140x70x50mm
Specifications
Back light compensation
Ordering Information
KTC-810CP
KTC-811CP
1/3" 380 TVL, 0.5 lux (F1.2) Colour Digital Camera, 12 VDC or
24 VAC
1/3" 380 TVL, 0.5 lux (F1.2) Colour Digital Camera, 85 to 264
VAC
Exclusive case design
Discrete DIP switch adjustment
1/3'' HyperHAD CCD
380 TVL resolution
0.5 Lux sensitivity
Smart backlight compensation
options
E
E
E
E
E
E
Thumbwheel back focus adjustment
Recessed lens connector
Local video test monitor output (extra BNC connector)
C and CS mount
DC and auto-iris compatible
Optional PlusPack for UTP video output
Professional Cameras
Page : 34
1/3" 480 TVL, 0.5 lux (F1.2) Colour hi-res Digital Camera, 12 VDC or 24 VAC
KTC-815CP
The new range of CamPlus cameras from GE Security comes complete
with a host of new features. Thumbwheel back focus adjustment and a
stylish new case design with recessed lens socket and concealed
control panel.The optional PlusPack further increases their versatility.
Using Hyper-HAD CCD sensor technology, the sensitivity of these
models is excellent, around 0.5 lux (@F1.2), with low noise. Where
necessary the super AGC boosts the video signal by another 6 db.
Smart Backlight Compensation (BLC) is achieved by a combination of
histogram and windows weighted integration of 225 separate
windows.
While combining exceptional performance and budgetary constraints,
the range of CamPlus cameras is designed to meet today's most
demanding surveillance requirements.
The advanced Auto Tracking White balance (ATW) ensures that colour
images remain natural, iris gain and white balance is simultaneously
controlled so that a clear image is produced even under extreme
lighting conditions.
Specifications
Image sensor
1/3" CCD sensor
Signal system
CCIR
Picture elements
542 x 582
Scanning system
625 lines
Sync system
Internal/line lock
Horizontal resolution
480 TVL
Sensitivity
0.5 lux at F1.2
Gain
Super AGC 36 dB
S/N ratio
Better than 48 dB
Auto exposure system
Gamma
CCD iris mode: 1/50 - 1/100,000 sec continuously
variable
Auto detect, histogram plus 225 areas windows
weight
On = 0.45 Off = 1
Video output signal
Composite: 1 V pk-pk at 75 ohm load
Auto iris lens
Accepts video and DC drive iris lens
Lens mount
C & CS mount
Operating temperature
-10 °C to + 50 °C
Supply voltage
12 VDC or 24 VAC (KTC-816CP: 85 to 264VAC)
Dimensions
140x70x50mm
Back light compensation
Ordering Information
KTC-815CP
KTC-816CP
1/3" 480 TVL, 0.5 lux (F1.2) Colour hi-res Digital Camera, 12
VDC or 24 VAC
1/3" 480 TVL, 0.5 lux (F1.2) Colour hi-res Digital Camera, 85 to
264 VAC
E
E
E
E
E
E
High resolution colour camera
Exclusive case design
1/3'' HyperHAD CCD
480 TVL resolution
0.5 Lux sensitivity
Smart Backlight compensation
E Auto tracking white and automatic white balance
options
E
E
E
E
E
Thumbwheel back focus adjustment
Recessed lens connector
Local video test monitor output (extra BNC connector)
C and CS mount
Optional PlusPack for UTP video output.
Professional Cameras
Page : 35
1/3" 480 TVL, 0.1 lux (F1.2) ExView Digital Colour Camera, 12 VDC or 24 VAC
KTC-840CEP
The new range of CamPlus cameras from GE Security comes complete
with a host of new features. Thumbwheel back focus adjustment and a
stylish new case design with recessed lens socket and concealed
control panel. The optional PlusPack further increases their versatility.
Using Exview-HAD CCD sensor technology, the sensitivity of these
models is excellent, around 0.1 lux (@F1.2), with low noise. Where
necessary the super AGC boosts the video signal by another 6 db.
Smart Backlight Compensation (BLC) is achieved by a combination of
histogram and windows weighted integration of 225 separate
windows.
While combining exceptional performance and budgetary constraints,
the range of CamPlus cameras is designed to meet today's most
demanding surveillance requirements.
The advanced Auto Tracking White balance (ATW) ensures that colour
images remain natural, iris gain and white balance is simultaneously
controlled so that a clear image is produced even under extreme
lighting conditions.
High resolution colour Exview camera
Image sensor
1/3" Exview CCD sensor
Signal system
CCIR
Picture elements
795 x 596
Scanning system
625 lines
Sync system
Internal/line lock
E
E
E
E
E
E
E
Horizontal resolution
480 TVL
E Auto tracking white and automatic white balance
Sensitivity
0.1 lux at F1.2
Gain
Super AGC 36 dB
S/N ratio
Better than 48 dB
Auto exposure system
Gamma
CCD iris mode: 1/50 - 1/100,000 sec continuously
variable
Auto detect, histogram plus 225 areas windows
weight
On = 0.45 Off = 1
Video output signal
Composite: 1 V pk-pk at 75 ohm load
Auto iris lens
Accepts video and DC drive iris lens
Lens mount
C & CS mount
Operating temperature
-10 °C to +50 °C
Supply voltage
12 VDC or 24 VAC (KTC-841CEP: 85 to 264 VAC)
Dimensions
140x70x50mm
Specifications
Back light compensation
Ordering Information
KTC-840CEP
KTC-841CEP
1/3" 480 TVL, 0.1 lux (F1.2) ExView Digital Colour Camera, 12
VDC or 24 VAC
1/3" 480 TVL, 0.1 lux (F1.2) Ex-View Digital Colour Camera, 85
to 265 VAC
Exclusive case design
DC and auto-iris compatible
1/3'' Exview HAD CCD
480 TVL resolution
0.1 Lux sensitivity
Smart backlight compensation
options
E
E
E
E
E
Thumbwheel back focus adjustment
Recessed lens connector
Local video test monitor output (extra BNC connector)
C and CS mount
Optional PlusPack for UTP video output
Professional Cameras
Page : 36
1/3"480TVL, 0.3 lux(F1.2) I.R Sensitive Col Digital Camera,12 VDC or 24 VAC
KTC-910P
The new range of CamPlus cameras from GE Security comes complete
with a host of new features. Thumbwheel back focus adjustment and a
stylish new case design with recessed lens socket and concealed
control panel. The optional PlusPack further increases their versatility.
Using Hyper HAD CCD sensor technology, the sensitivity of these
models is excellent, around 0.3 lux (@F1.2), with low noise and infrared
sensitivity. Where necessary the super AGC boosts the video signal by
another 6 db.
Smart Backlight Compensation (BLC) is achieved by a combination of
histogram and windows weighted integration of 225 separate
windows.
While combining exceptional performance and budgetary constraints,
the range of CamPlus cameras is designed to meet today's most
demanding surveillance requirements.
Specifications
Image sensor
1/3" CCD sensor
Signal system
CCIR
Picture elements
795 x 596
Scanning system
625 lines
Sync system
Internal/line lock
Horizontal resolution
480 TVL
Sensitivity
0.3 lux at F1.2
Gain
Super AGC 36 dB
S/N ratio
Better than 48 dB
Auto exposure system
Gamma
CCD iris mode: 1/50 - 1/100,000 sec continuously
variable
Auto detect, histogram plus 225 areas windows
weight
On = 0.45 Off = 1
Video output signal
Composite: 1 V pk-pk at 75 ohm load
Auto iris lens
Accepts Video and DC drive iris lens
Lens mount
C & CS mount
Operating temperature
-10 °C to +50 °C
Supply voltage
12 VDC or 24 VAC (KTC-911P: 85 to 264 VAC)
Dimensions
140x70x50mm
Back light compensation
NOTE: some colour variance may
occur with this camera
Ordering Information
KTC-910P
KTC-911P
1/3"480TVL, 0.3 lux(F1.2) I.R Sensitive Col Digital Camera,12
VDC or 24 VAC
1/3" 480 TVL, 0.3 lux (F1.2) I.R Sensitive Col Digital Camera, 85
to 264 VAC
E
E
E
E
E
E
High resolution colour camera with infrared sensitivity
Discrete DIP switch adjustment
DC and auto-iris compatible
480 TVL resolution
0.3 Lux sensitivity
Smart backlight compensation
E Auto tracking white and automatic white balance
options
E
E
E
E
E
Thumbwheel back focus adjustment
Recessed lens connector
Local video test monitor output (extra BNC connector)
C and CS mount
Optional Pluspack for UTP video output
Professional Cameras
Page : 37
1/3'' 480TVL 0.1/0.01 Lux ExView Day/Night Camera, 12 VDC or 24 VAC
KTC-2000DNP
The new range of CamPlus cameras from GE Security comes complete
with a host of new features. Thumbwheel back focus adjustment and a
stylish new case design with recessed lens socket and concealed
control panel. The optional PlusPack further increases their versatility.
True day/night capability with motorised I/R cut filter for true daytime
colour rendition and exceptional I/R sensitivity.
Using Exview HAD CCD sensor technology, the sensitivity of these
models is excellent, around 0.1 lux day time and 0.01 lux night time
(@F1.2), with low noise.
Smart Backlight Compensation (BLC) is achieved by a combination of
histogram and windows weighted integration of 225 separate
windows.
While combining exceptional performance and budgetary constraints,
the range of CamPlus cameras is designed to meet today's most
demanding surveillance requirements.
The advanced Auto Tracking White balance (ATW) ensures that colour
images remain natural, iris gain and white balance is simultaneously
controlled so that a clear image is produced even under extreme
lighting conditions.
Specifications
Image sensor
1/3" Exview CCD sensor
Signal system
CCIR
Picture elements
795 x 596
Scanning system
625 lines
Sync system
Internal/line lock
Horizontal resolution
480 TVL
Sensitivity
0.1/0.01 lux at F1.2
Gain
Super AGC 36 dB
S/N ratio
Better than 48 dB
Auto exposure system
Gamma
CCD iris mode: 1/50 - 1/100,000 sec continuously
variable
Auto detect, histogram plus 225 areas windows
weight
On = 0.45 Off = 1
Video output signal
Composite: 1 V pk-pk at 75 ohm load
Auto iris lens
Accepts video and DC drive iris lens
Lens mount
C & CS mount
Operating temperature
-10 °C to + 50 °C
Supply voltage
12 VDC or 24 VAC (KTC-2001DNP: 85 to 264 VAC)
Dimensions
140x70x50mm
Back light compensation
Ordering Information
KTC-2000DNP
KTC-2001DNP
1/3'' 480TVL 0.1/0.01 Lux ExView Day/Night Camera, 12 VDC
or 24 VAC
1/3'' 480 TVL 0.1/0.01 Lux ExView Day/Night Camera, 85 to
264 VAC
E
E
E
E
E
E
High resolution colour monochrome Exview camera
Discrete DIP switch adjustment
DC and auto-iris compatible
480 TVL resolution
0.1/0.01 Lux sensitivity
Smart backlight compensation
E Auto tracking white and automatic white balance
options
E
E
E
E
E
Thumbwheel back focus adjustment
Recessed lens connector
Local video test monitor output (extra BNC connector)
C and CS mount
Optional PlusPack for UTP video output
Video Transmission
Page : 38
KTCB-UTP
PlusPack Unshielded twisted pair camera module
PlusPack, GE's unique new concept in video transmission.
Compatible with all of the current CamPlus range of cameras, PlusPack
converts a traditional analogue video output to unshielded twisted
pair.(UTP) transmission format.
The KTCB-UTP passive transceiver can be used with any of GE's range
of active or passive UTP products with distances up to 800 meters on
standard Cat5 cable
Specifications
Video Input
BNC quick connector
Video Level
1 Volt Pk-Pk
Transmission distance
400 meters passive, 800 meters active
Minimum cable requirement
CAT 5 (or above)
Dimensions
58x45x30mm
Ordering Information
KTCB-UTP
PlusPack Unshielded twisted pair camera module
E Exclusive UTP add-on module compatible with all GE
Security CamPlus Cameras
E Transmit a full motion color or monochrome video
signal up to 400 meters
E Distance up to 800 meters when used with an active
receiver
E Passive, no power required
E Built in impedance couple device and noise filter for
exceptional interference immunity
Professional Cameras
Page : 39
KTC-XP1
UltraView, High Resolution, Wide Dynamic Range Camera
Regulatory
The UltraView KTC-XP1 is a high-resolution, wide dynamic range
camera that uses innovative XPosure technology from GE Security.
This technology optimises the exposure for each pixel, showing details
in the shadows and highlights. This performance allows every detail to
be captured accurately even in the most challenging lighting
conditions, making it ideal for high risk applications like retail, business
and bank entrances.
UL, CUL, FCC, CE
Ordering Information
KTC-XP1
UltraView, High Resolution, Wide Dynamic Range Camera
Unlike traditional charge-coupled device (CCD) solutions, which funnel
millions of pixels per video frame through one analog-to-digital
converter (ADC), XPosure cameras use a separate ADC for each and
every pixel. The result is a dynamic range approximately 250 times
better than that of the average CCD camera up to 95 dB during normal
operation while achieving 480 horizontal and vertical and 460 vertical
TV lines of resolution. And because XPosure samples each pixel several
times per frame, it optimises exposure for each pixel independent of
other pixels in the frame.
In contrast, a collectively averaged CCD camera will sample an entire
array of pixels at the same time, producing images with both
underexposed and overexposed pixels.
The UltraView KTC-XP1 operates well in even the most challenging
dynamic range situations without complicated setup. This fully
automated system captures images in light as low as 0.4 lux, with a
signal-to-noise ratio of up to 52 dB. Enhanced vertical resolution
enables high quality digital functionality. Advanced image processing
provides accurate, film-like colours even in high dynamic range scenes.
Automatic white balance ensures good quality colour rendition under
all lighting conditions.
Specifications
Image device
1/3 inch sensor GE Security XPosure technology
Dynamic range
95 dB typical / 120 dB max
Signal system
NTSC / PAL selectable
Picture elements
720 x 540
Scanning system
525/60 lines (NTSC); 625/50 lines (PAL)
Synchronising system
Internal / AC linelock
Resolution
480 TVL (horizontal) 460 TVL (vertical)
Sensitivity
0.4 lux @ f1.2, 30 IRE
Signal to noise ratio
52 dB
Composite and S-video outputs
Gain
Can be used simultaneously, as well as monitor
output
ATW, ATW-WIDE, HOLD possible range of 2,000 to
11,000 K
AGC on / off
Gamma correction
0.45 (NTSC) / 0.36 (PAL)
Video output
Composite: 1.0 V pk-pk at 75 ohm load
Lens selection
Accepts manual, video or DC autoiris lenses
Lens mount
C and CS mounts
Operating temperature
-10 °C to + 60 °C
Supply voltage
11 to 30 VDC or 18-30 VAC
Power consumption
3.9 W (12 VDC), 4.3 W (24 VAC)
Weight
411 g
Dimensions
125x75x54mm
Colour balance
E GE Security XPosure technology
E 480 horizontal lines of resolution, 460 vertical lines of
resolution
E
E
E
E
E
E
E
E
E
E
Dynamic range 95 dB (typical), 120 dB (max)
Internal, linelock sync modes
NTSC / PAL selectable in one camera
AWB / ATW
Accepts manual, DC, and video autoiris lenses
Universal power supply
Preset modes optimized for various environments
5-button on-screen display interface
Enhanced digital PTZ
0.4 lux @ F1.2
MONITORS
The GE Security range of monitors is ideally suited to a wide range of applications
including most retail, industrial and commercial systems.
Monitors
Page : 43
LV-15W
15" TFT Flatscreen CCTV monitor
The new LV-15W with attractive silver finish is the next generation
professional LCD monitor from GE-Security. A new hi-resolution, low
lag panel is the heart of this high end display.
New features include Picture in Picture (PIP) from two different sources,
so a single monitor can display two different display sources (VGA and
Video) at the same time, plus an over/under scan option.
The high contrast and brightness LV-15W colour 15" LCD monitor is
ideally suited to a wide range of applications, including most retail,
industrial and commercial environments. Light in weight, compact and
with low current requirements, the LCD monitor represents the future
in surveillance requirements.
An array of different compatible wall mounts and desk brackets are
also available (contact your GE Security sales rep for info)
Specifications
LCD Display
15" TFT
Resolution
1024 x 768 XGA
Effective Display area
304.1 x 228.1 mm
Pixel Pitch
0.297 x 0.297 mm
Colour
262,144 colours
Response Time
16 ms
Contrast Ratio
400 : 1
Brightness
500 cd /m 2
Viewing Angle
140 (H) x 130 (V)
Input Signal
Video (loop-thru) , S-Video (loop-thru) and VGA
VGA Signal
Analogue VGA / 15 Pin-D-Sub connector
Scan Frequencies
Horizontal: 30 K ~ 80 KHz Vertical: 56 ~ 75Hz
Video input
1.0 Vp-p 75 / BNC in/out, Y/C input, PAL: 15.625 KHz
Front panel controls
Supply voltage
Power, Auto Tuning, Menu, Volume, Brightness,
Contrast
Brightness, Contrast, Auto adjust, PIP, Phase Clock, H.
Position, V. Position, Sharpness,etc
12 VDC, 3 Amp (power supply included)
Power consumption (max)
50W (max)
Operating temperature
0°C to + 40°C'
Operating humidity
10% to 85%
Dimensions
353(W) x 338(H) x 170(D) mm
Net weight
4 kg
Safety & EMI
FCC, CE, UL, CUL, BSMI
Audio
1x Phono (loop-thru) 1 Watt max
OSD controls
Ordering Information
LV-15W
LV-17W
LV-19W
15" TFT Flatscreen CCTV monitor
17" TFT Flatscreen CCTV monitor
19" TFT Flatscreen CCTV monitor
E New slimline silver design
E Latest generation High Contrast, Brightness, low lag
TFT panel
E
E
E
E
E
Industry standard BNC, S-video, Audio Loop Through
Picture in Picture function (PIP)
High viewing angle
Under/Over scan function
NTSC/PAL auto recognition
Monitors
Page : 44
LV-17W
17" TFT Flatscreen CCTV monitor
The new LV-17W with an attractive silver finish is the next generation
professional LCD monitor from GE-Security. A new hi-resolution, low
lag panel is the heart of this high end display.
New features include Picture in Picture (PIP) from two different sources,
so a single monitor can display two different display sources (VGA and
Video) at the same time, plus an over/under scan option.
The high contrast and brightness LV-17W colour 17" LCD monitor is
ideally suited to a wide range of applications, including most retail,
industrial and commercial environments. Light in weight, compact and
with low current requirements, the LCD monitor represents the future
in surveillance requirements.
An array of different compatible wall mounts and desk brackets are
also available (contact your GE Security sales rep for info)
Specifications
LCD Display
17" TFT
Resolution
1280 x 1024 SXGA
Effective Display area
337.92 x 270.34 mm
Pixel Pitch
0.264 x 0.264 mm
Colour
16.7 million colours
Response Time
15/10 ms
Contrast Ratio
500 : 1
Brightness
250 cd /m 2
Viewing Angle
170 (H) x 170 (V)
Input Signal
Video (loop-thru) , S-Video (loop-thru) and VGA
VGA Signal
Analogue VGA / 15 Pin-D-Sub connector
Scan Frequencies
Horizontal: 30 K ~ 80 KHz Vertical: 56 ~ 75Hz
Video input
1.0 Vp-p 75 / BNC in/out, Y/C input, PAL: 15.625 KHz
Front panel controls
Supply voltage
Power, Auto Tuning, Menu, Volume, Brightness,
Contrast
Brightness, Contrast, Auto adjust, PIP, Phase Clock, H.
Position, V. Position, Sharpness,etc
12 VDC, 3 Amp (power supply included)
Power consumption (max)
50W (max)
Operating temperature
0°C to + 40°C'
Operating humidity
10% to 85%
Dimensions
375(W) x 370(H) x 170(D) mm
Net weight
5 kg
Safety & EMI
FCC, CE, UL, CUL, BSMI
Audio
1x Phono (loop-thru) 1 Watt max
OSD controls
Ordering Information
LV-15W
LV-17W
LV-19W
15" TFT Flatscreen CCTV monitor
17" TFT Flatscreen CCTV monitor
19" TFT Flatscreen CCTV monitor
E New slimline silver design
E Latest generation High Contrast, Brightness, low lag
TFT panel
E
E
E
E
E
Industry standard BNC, S-video, Audio Loop Through
Picture in Picture function (PIP)
High viewing angle
Under/Over scan function
NTSC/PAL auto recognition
Monitors
Page : 45
LV-19W
19" TFT Flatscreen CCTV monitor
The new LV-19W with an attractive silver finish is the next generation
professional LCD monitor from GE-Security. A new hi-resolution, low
lag panel is the heart of this high end display.
New features include Picture in Picture (PIP) from two different sources,
so a single monitor can display two different display sources (VGA and
Video) at the same time, plus an over/under scan option.
The high contrast and brightness LV-19W colour 19" LCD monitor is
ideally suited to a wide range of applications, including most retail,
industrial and commercial environments. Light in weight, compact and
with a low current requirements, the LCD monitor represents the future
in surveillance requirements.
An array of different compatible wall mounts and desk brackets are
also available (contact your GE Security sales rep for info)
Specifications
LCD Display
19" TFT
Resolution
1280 x 1024 SXGA
Effective Display area
376.32 x 301.06 mm
Pixel Pitch
0.294 x 0.294 mm
Colour
16.7 million colours
Response Time
15/10 ms
Contrast Ratio
500 : 1
Brightness
250 cd /m 2
Viewing Angle
170 (H) x 170 (V)
Input Signal
Video (loop-thru) , S-Video (loop-thru) and VGA
VGA Signal
Analogue VGA / 15 Pin-D-Sub connector
Scan Frequencies
Horizontal: 30 K ~ 80 KHz Vertical: 56 ~ 75Hz
Video input
1.0 Vp-p 75 / BNC in/out, Y/C in/out, PAL: 15.625 KHz
Front panel controls
Supply voltage
Power, Auto Tuning, Menu, Volume, Brightness,
Contrast
Language, Brightness, Contrast, Auto adjust, PIP,
Phase Clock, H. Position, Sharpness,etc
12 VDC, 3 Amp (power supply included)
Power consumption (max)
50W (max)
Operating temperature
0°C to + 40°C'
Operating humidity
10% to 85%
Dimensions
420.60(W) x 405.30(H) x 170.00(D) mm
Net weight
6.3 kg
Safety & EMI
FCC, CE, UL, CUL, BSMI
Audio
1x Phono (loop-thru) 1 Watt max
OSD controls
Ordering Information
LV-15W
LV-17W
LV-19W
15" TFT Flatscreen CCTV monitor
17" TFT Flatscreen CCTV monitor
19" TFT Flatscreen CCTV monitor
E New slimline silver design
E Latest generation High Contrast, Brightness, low lag
TFT panel
E
E
E
E
E
Industry standard BNC, S-video, Audio Loop Through
Picture in Picture function (PIP)
High viewing angle
Under/Over scan function
NTSC/PAL auto recognition
CYBERDOMES
An extensive range of Hi Quality Cyberdomes
with almost 2,000 different combinations.
Cyberdome
Page : 49
6-inch, CyberDome Day/Night, flush mount,clear, colour/monochrome
KTA-F3-D2C
The 6 inch flush mount day/night CyberDome is a discreet, variable
speed pan/tilt/zoom dome capable of speeds up to 400° per second.
The CyberDome uses an integrated camera with automatic switching
between colour and monochrome modes at low light levels and an 18x
optical zoom lens. Features include auto iris with manual override, auto
or manual focus, backlight compensation, 64 programmable preset
positions, preset and zone titling, and up to four camera tours. A
dynamic privacy masking allows the user to define up to 24 different
masks with a maximum of 8 visible on the screen simultaneously.
Specifications
Signal format
CCIR/PAL
Scanning system
2:1 interlacing
Scanning frequency
Horizontal
15.625 kHz
Vertical
50 Hz
Image sensor
1/4" solid-state interline transfer CCD image sensor
Picture elements
752 (H) x 582 (V)
Lens
F1.4, f=4.1~73.8 mm, 18X zoom, auto focus
Optical zoom
18X
Digital zoom
12X
Angle of view
H: 48° (wide), 2.7° (tele)
Focus length
Inf. ~0.01 m (wide) ~1.0 m (tele)
Sync. system
Internal, line lock
Horizontal resolution
460 TVL
Signal to noise ratio
More than 50 dB
Sensitivity
0.7 lux colour; 0.01 lux monochrome
Video output
Composite, 1.0 V pk-pk at 75 ohms load
Electronic shutter
1/3 ~ 1/10000 sec
Privacy masking
Dynamic privacy masking : 24 masks
Operational
Pan travel
360°
Tilt travel
90°
Speed in manual mode
0.5° to 120° / sec, variable
Speed in preset mode
Up to 400°/sec, 200°/sec average
Electrical
Input voltage
24 VAC
Power
16 W
Control
RS422 Digiplex 4800 baud
Ordering Information
KTA-F3-D2C
6-inch, CyberDome Day/Night, flush mount,clear,
colour/monochrome
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
6" flush mount CyberDome
460 TVL colour / monochrome camera
0.7 lux colour sensitivity; 0.01 lux monochrome
18x optical zoom lens
Auto iris with manual override
Auto/manual focus
64 programmable presets
16 titles for Preset and Zone
Auto return function
two 4 minute shadow tours
360° continuous pan
Quick spin target tracking
Variable speeds up to 400°/sec
Twist-on dome attachments
Quick release connector
Twisted pair control
Cyberdome
Page : 50
KTA-F3-H2C
6-inch, CyberDome Select, flush mount,clear, colour
The 6 inch flush mount CyberDome select is a discreet, variable speed
pan/tilt/zoom dome capable of speeds up to 400° per second. The
CyberDome uses an integrated colour camera with an 18x optical
zoom lens. Features include auto iris with manual override, auto or
manual focus, backlight compensation, 32 programmable preset
positions, preset and zone titling, and one camera tour.
Specifications
Signal format
CCIR/PAL
Scanning system
2:1 interlacing
Scanning frequency
Horizontal
15.625 kHz
Vertical
50 Hz
Image sensor
1/4" solid-state interline transfer CCD image sensor
Picture elements
752 (H) x 582 (V)
Lens
F1.4, f=4.1~73.8 mm, 18X zoom, auto focus
Optical zoom
18X
Digital zoom
12X
Angle of view
H: 48° (wide), 2.7° (tele)
Focus length
Inf. ~0.01 m (wide) ~1.0 m (tele)
Sync. system
Internal, line lock
Horizontal resolution
460 TVL
Signal to noise ratio
More than 50 dB
Sensitivity
2 lux colour
Video output
Composite, 1.0 V pk-pk at 75 ohms load
Electronic shutter
1/3 ~ 1/10000 sec
Operational
Pan travel
360°
Tilt travel
90°
Speed in manual mode
0.5° to 120° / sec, variable
Speed in preset mode
Up to 400°/sec, 200°/sec average
Electrical
Input voltage
24 VAC
Power
16 W
Control
RS422 Digiplex 4800 baud
Ordering Information
KTA-F3-H2C
6-inch, CyberDome Select, flush mount,clear, colour
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
6" flush mount CyberDome
460 TVL colour camera
2 lux sensitivity
18x optical zoom lens
Auto iris with manual override
Auto/manual focus
32 programmable presets
16 titles for Preset and Zone
Auto return function
One 4 minute shadow tour
360° continuous pan
Variable speeds up to 400°/sec
Twist-on dome attachments
Quick release connector
Twisted pair control
Cyberdome
Page : 51
7-inch, CyberDome Day/Night, pendant mount, clear, colour/monochrome
KTA-H3-D2C
The 7 inch Pendant Mount Day/Night CyberDome is a discreet, variable
speed pan/tilt/zoom dome capable of speeds up to 400° per second.
The CyberDome uses an integrated camera with automatic switching
between colour and monochrome modes at low light levels and a 18x
optical zoom lens. Features include auto iris with manual override, auto
or manual focus, backlight compensation, 64 programmable preset
positions, preset and zone titling, and up to four camera tours. A
dynamic privacy masking allows the user to define up to 24 different
masks with a maximum of 8 visible on the screen simultaneously.
Specifications
Signal format
CCIR/PAL
Scanning system
2:1 interlacing
Scanning frequency
Horizontal
15.625 kHz
Vertical
50 Hz
Image sensor
1/4" solid-state interline transfer CCD image sensor
Picture elements
752 (H) x 582 (V)
Lens
F1.4, f=4.1~73.8 mm, 18X zoom, auto focus
Optical zoom
18X
Digital zoom
12X
Angle of view
H: 48° (wide), 2.7° (tele)
Focus length
Inf. ~0.01 m (wide) ~1.0 m (tele)
Sync. system
Internal, line lock
Horizontal resolution
460 TVL
Signal to noise ratio
More than 50 dB
Sensitivity
0.7 lux colour; 0.01 lux monochrome
Video output
Composite, 1.0 V pk-pk at 75 ohms load
Electronic shutter
1/3 ~ 1/10000 sec
Privacy masking
Dynamic privacy masking : 24 masks
Operational
Pan travel
360°
Tilt travel
90°
Speed in manual mode
0.5° to 120° / sec, variable
Speed in preset mode
Up to 400°/sec, 200°/sec average
Electrical
Input voltage
24 VAC
Power
16 W
Control
RS422 Digiplex 4800 baud
Ordering Information
KTA-H3-D2C
7-inch, CyberDome Day/Night, pendant mount, clear,
colour/monochrome
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
7" pendant mount dome
460 TVL colour / monochrome camera
0.7 lux colour sensitivity; 0.01lux monochrome
18x optical zoom lens
Auto iris with manual override
Auto/manual focus
64 programmable presets
16 titles for Preset and Zone
Auto return function
two 4 minute shadow tours
360° continuous pan
Quick spin target tracking
Variable speeds up to 400°/sec
Twist-on dome attachments
Quick release connector
Twisted pair control
Cyberdome
Page : 52
KTA-H3-H2C
7-inch, CyberDome Select, pendant mount,clear, colour
The 7inch pendant mount CyberDome Select is a discreet, variable
speed pan/tilt/zoom dome capable of speeds up to 400° per second.
The CyberDome uses an integrated colour camera with an 18x optical
zoom lens. Features include auto iris with manual override, auto or
manual focus, backlight compensation, 32 programmable preset
positions, preset and zone titling, and two camera tours.
Specifications
Signal format
CCIR/PAL
Scanning system
2:1 interlacing
Scanning frequency
Horizontal
15.625 kHz
Vertical
50 Hz
Image sensor
1/4" solid-state interline transfer CCD image sensor
Picture elements
752 (H) x 582 (V)
Lens
F1.4, f=4.1~73.8 mm, 18X zoom, auto focus
Optical zoom
18X
Digital zoom
12X
Angle of view
H: 48° (wide), 2.7° (tele)
Focus length
Inf. ~0.01 m (wide) ~1.0 m (tele)
Sync. system
Internal, line lock
Horizontal resolution
460 TVL
Signal to noise ratio
More than 50 dB
Sensitivity
2 lux colour
Video output
Composite, 1.0 V pk-pk at 75 ohms load
Electronic shutter
1/3 ~ 1/10000 sec
Operational
Pan travel
360°
Tilt travel
90°
Speed in manual mode
0.5° to 120° / sec, variable
Speed in preset mode
Up to 400°/sec, 200°/sec average
Electrical
Input voltage
24 VAC
Power
16 W
Control
RS422 Digiplex 4800 baud
Ordering Information
KTA-H3-H2C
7-inch, CyberDome Select, pendant mount,clear, colour
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
7" pendant mount CyberDome
460 TVL colour camera
2 lux sensitivity
18x optical zoom lens
Auto iris with manual override
Auto/manual focus
32 programmable presets
16 titles for Preset and Zone
Auto return function
One 4 minute shadow tour
360° continuous pan
Variable speeds up to 400°/sec
Twist-on dome attachments
Quick release connector
Twisted pair control
Cyberdome
Page : 53
7-inch, IP65 Rugged Dome Day/Night, pendant mount, clear, colour/monochrome
KTA-RE3-D2C
The 7 inch pendant mount day/night rugged CyberDome combines the
durability of cast aluminum with the resistance of an acrylic dome.
This Rugged Dome is designed to satisfy IP65 installation environments
and extreme cold weather. An optional KTA-28 wall bracket is
availlable for wall mounting. The CyberDome uses an integrated
camera with automatic switching between colour and monochrome
modes at low light levels and an 18x optical zoom lens. Features
include auto iris with manual override, auto or manual focus, backlight
compensation, 64 programmable preset positions, preset and zone
titling, and up to four camera tours. A dynamic privacy masking allows
the user to define up to 24 different masks with a maximum of 8 visible
on the screen simultaneously.
Specifications
Signal format
CCIR/PAL
Scanning system
2:1 interlacing
Scanning frequency
Horizontal
15.625 kHz
Vertical
50 Hz
Image sensor
1/4" solid-state interline transfer CCD image sensor
Picture elements
Lens
F1.4, f=4.1~73.8 mm, 18X zoom, auto focus
Optical zoom
18X
Digital zoom
12X
Angle of view
H: 48° (wide), 2.7° (tele)
Focus length
Inf. ~0.01 m (wide) ~1.0 m (tele)
Sync. system
Internal, line lock
Horizontal resolution
460 TVL
Signal to noise ratio
More than 50 dB
Sensitivity
0.7 lux colour; 0.01 lux monochrome
Video output
Composite, 1.0 V pk-pk at 75 ohms load
Electronic shutter
1/3 ~ 1/10000 sec
Privacy masking
Dynamic privacy masking : 24 masks
Operational
Pan travel
360°
Tilt travel
90°
Speed in manual mode
0.5° to 120° / sec, variable
Speed in preset mode
Up to 400°/sec, 200°/sec average
Electrical
Input voltage
24 VAC
Power
51 W; 111 W with optional extreme T° pack
Control
RS422 Digiplex 4800 baud
Environmental
Degree of protection
IP65
Temperature range
-25°C to +50°C ; -40°C to +50°C with optional
Extreme T° pack
Ordering Information
KTA-RE3-D2C
E 7" pendant mount rugged CyberDome with acrylic
dome
752 (H) x 582 (V)
7-inch, IP65 Rugged Dome Day/Night, pendant mount, clear,
colour/monochrome
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
IP65 certified housing with heather and fan
460 TVL colour / monochrome camera
0.7 lux colour sensitivity; 0.01lux monochrome
18x optical zoom lens
Auto iris with manual override
Auto/manual focus
64 programmable presets
16 titles for Preset and Zone
Auto return function
two 4 minute shadow tours
360° continuous pan
Quick spin target tracking
Variable speeds up to 400°/sec
Twist-on dome attachments
Quick release connector
Twisted pair control
Cyberdome
Page : 54
KTA-RE3-H2C
7-inch, IP65 Rugged Dome Select, pendant mount,clear, colour
The 7 inch pendant mount rugged CyberDome Select combines the
durability of cast aluminum with the resistance of an acrylic dome. This
rugged dome is designed to satisfy IP65 installation environments and
extreme cold weather. An optional KTA-28 wall bracket is availlable for
wall mounting. The CyberDome uses an integrated colour camera with
an 18x optical zoom lens. Features include auto iris with manual
override, auto or manual focus, backlight compensation, 32
programmable preset positions, preset and zone titling, and two
camera tours.
Specifications
Signal format
CCIR/PAL
Scanning system
2:1 interlacing
Scanning frequency
Horizontal
15.625 kHz
Vertical
50 Hz
Image sensor
1/4" solid-state interline transfer CCD image sensor
Picture elements
752 (H) x 582 (V)
Lens
F1.4, f=4.1~73.8 mm, 18X zoom, auto focus
Optical zoom
18X
Digital zoom
12X
Angle of view
H: 48° (wide), 2.7° (tele)
Focus length
Inf. ~0.01 m (wide) ~1.0 m (tele)
Sync. system
Internal, line lock
Horizontal resolution
460 TVL
Signal to noise ratio
More than 50 dB
Sensitivity
2 lux colour
Video output
Composite, 1.0 V pk-pk at 75 ohms load
Electronic shutter
1/3 ~ 1/10000 sec
Operational
Pan travel
360°
Tilt travel
90°
Speed in manual mode
0.5° to 120° / sec, variable
Speed in preset mode
Up to 400°/sec, 200°/sec average
Electrical
Input voltage
24 VAC
Power
51 W; 111 W with optional extreme T° pack
Control
RS422 Digiplex 4800 baud
Environmental
Degree of protection
IP65
Temperature range
-25°C to +50°C; -40°C to +50°C with optional
Extreme pack.
Ordering Information
KTA-RE3-H2C
7-inch, IP65 Rugged Dome Select, pendant mount,clear,
colour
E 7" pendant mount rugged CyberDome with acrylic
dome
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
IP65 certified housing with heather and fan
460 TVL colour camera
2 lux sensitivity
18x optical zoom lens
Auto iris with manual override
Auto/manual focus
32 programmable presets
16 titles for Preset and Zone
Auto return function
One 4 minute shadow tour
360° continuous pan
Variable speeds up to 400°/sec
Twist-on dome attachments
Quick release connector
Twisted pair control
Cyberdome
Page : 55
7-inch, IP65 Rugged Dome Day/Night, pendant mount, clear, colour/monochrome
KTA-RE8-D2C
The 7 inch pendant mount Day/Night rugged CyberDome combines
the durability of cast aluminum with the impact resistance of a
polycarbonate dome. This Rugged Dome is designed to satisfy IP65
installation environments and extreme cold weather. An optional
KTA-28 wall bracket is availlable for wall mounting. The CyberDome
uses an integrated camera with automatic switching between colour
and monochrome modes at low light levels and an 18x optical zoom
lens. Features include auto iris with manual override, auto or manual
focus, backlight compensation, 64 programmable preset positions,
preset and zone titling, and up to four camera tours. A dynamic privacy
masking allows the user to define up to 24 different masks with a
maximum of 8 visible on the screen simultaneously.
Specifications
Signal format
CCIR/PAL
Scanning system
2:1 interlacing
Scanning frequency
Horizontal
15.625 kHz
Vertical
50 Hz
Image sensor
1/4" solid-state interline transfer CCD image sensor
Picture elements
Lens
F1.4, f=4.1~73.8 mm, 18X zoom, auto focus
Optical zoom
18X
Digital zoom
12X
Angle of view
H: 48° (wide), 2.7° (tele)
Focus length
Inf. ~0.01 m (wide) ~1.0 m (tele)
Sync. system
Internal, line lock
Horizontal resolution
460 TVL
Signal to noise ratio
More than 50 dB
Sensitivity
0.7 lux colour; 0.01 lux monochrome
Video output
Composite, 1.0 V pk-pk at 75 ohms load
Electronic shutter
1/3 ~ 1/10000 sec
Privacy masking
Dynamic privacy masking : 24 masks
Operational
Pan travel
360°
Tilt travel
90°
Speed in manual mode
0.5° to 120° / sec, variable
Speed in preset mode
Up to 400°/sec, 200°/sec average
Electrical
Input voltage
24 VAC
Power
51 W; 111 W with optional extreme T° pack
Control
RS422 Digiplex 4800 baud
Environmental
Degree of protection
IP65
Temperature range
-25°C to +50°C ; -40°C to +50°C with optional
Extreme T° pack
Ordering Information
KTA-RE8-D2C
E 7" pendant mount rugged CyberDome with
polycarbonate dome
752 (H) x 582 (V)
7-inch, IP65 Rugged Dome Day/Night, pendant mount, clear,
colour/monochrome
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
IP65 certified housing with heather and fan
460 TVL colour / monochrome camera
0.7 lux colour sensitivity; 0.01lux monochrome
18x optical zoom lens
Auto iris with manual override
Auto/manual focus
64 programmable presets
16 titles for Preset and Zone
Auto return function
two 4 minute shadow tours
360° continuous pan
Quick spin target tracking
Variable speeds up to 400°/sec
Twist-on dome attachments
Quick release connector
Twisted pair control
Cyberdome
Page : 56
7-inch, IP65 Rugged Dome Select, pendant mount,clear polycarbonate, colour
KTA-RE8-H2C
The 7inch pendant mount rugged CyberDome Select combines the
durability of cast aluminum with the impact resistance of a
polycarbonate dome. This rugged dome is designed to satisfy IP65
installation environments and extreme cold weather. An optional
KTA-28 wall bracket is availlable for wall mounting. The CyberDome
uses an integrated colour camera with an 18x optical zoom lens.
Features include auto iris with manual override, auto or manual focus,
backlight compensation, 32 programmable preset positions, preset
and zone titling, and two camera tours.
Specifications
Signal format
CCIR/PAL
Scanning system
2:1 interlacing
Scanning frequency
Horizontal
15.625 kHz
Vertical
50 Hz
Image sensor
1/4" solid-state interline transfer CCD image sensor
Picture elements
752 (H) x 582 (V)
Lens
F1.4, f=4.1~73.8 mm, 18X zoom, auto focus
Optical zoom
18X
Digital zoom
12X
Angle of view
H: 48° (wide), 2.7° (tele)
Focus length
Inf. ~0.01 m (wide) ~1.0 m (tele)
Sync. system
Internal, line lock
Horizontal resolution
460 TVL
Signal to noise ratio
More than 50 dB
Sensitivity
2 lux colour
Video output
Composite, 1.0 V pk-pk at 75 ohms load
Electronic shutter
1/3 ~ 1/10000 sec
Operational
Pan travel
360°
Tilt travel
90°
Speed in manual mode
0.5° to 120° / sec, variable
Speed in preset mode
Up to 400°/sec, 200°/sec average
Electrical
Input voltage
24 VAC
Power
51 W; 111 W with optional extreme T° pack
Control
RS422 Digiplex 4800 baud
Environmental
Degree of protection
IP65
Temperature range
-25°C to +50°C; -40°C to +50°C with optional
Extreme pack.
Ordering Information
KTA-RE8-H2C
7-inch, IP65 Rugged Dome Select, pendant mount,clear
polycarbonate, colour
E 7" pendant mount rugged CyberDome with
polycarbonate dome
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
IP65 certified housing with heather and fan
460 TVL colour camera
2 lux sensitivity
18x optical zoom lens
Auto iris with manual override
Auto/manual focus
32 programmable presets
16 titles for Preset and Zone
Auto return function
One 4 minute shadow tour
360° continuous pan
Variable speeds up to 400°/sec
Twist-on dome attachments
Quick release connector
Twisted pair control
Cyberdome
Page : 57
8-inch, Heavy Duty CyberDome Day/Night, clear, colour/monochrome
KTA-DE8-D2C
The 8 inch heavy duty day/night CyberDome is perfect for applications
where vandalism is a problem. Designed to withstand physical abuses,
the heavy duty CyberDome features a thick aluminum upper housing
and an extra strong polycarbonate dome. This heavy duty CyberDome
is designed for indoor or outdoor appplications and comes with a
built-in heather and fan. The heavy duty CyberDome uses an
integrated camera with automatic switching between colour and
monochrome modes at low light levels and an 18x optical zoom lens.
Features include auto iris with manual override, auto or manual focus,
backlight compensation, 64 programmable preset positions, preset
and zone titling, and up to four camera tours. A dynamic privacy
masking allows the user to define up to 24 different masks with a
maximum of 8 visible on the screen simultaneously.
Specifications
Signal format
CCIR/PAL
Scanning system
2:1 interlacing
Scanning frequency
Horizontal
15.625 kHz
Vertical
50 Hz
Image sensor
1/4" solid-state interline transfer CCD image sensor
Picture elements
752 (H) x 582 (V)
Lens
Polycarbonate dome
F1.4, f=4.1~73.8 mm, 18X zoom, auto focus
Optical zoom
18X
Digital zoom
12X
Angle of view
H: 48° (wide), 2.7° (tele)
Focus length
Inf. ~0.01 m (wide) ~1.0 m (tele)
Sync. system
Internal, line lock
Horizontal resolution
460 TVL
Signal to noise ratio
More than 50 dB
Sensitivity
0.7 lux colour; 0.01 lux monochrome
Video output
Composite, 1.0 V pk-pk at 75 ohms load
Electronic shutter
1/3 ~ 1/10000 sec
Privacy masking
Dynamic privacy masking : 24 masks
Operational
Pan travel
360°
Tilt travel
90°
Speed in manual mode
0.5° to 120° / sec, variable
Speed in preset mode
Up to 400°/sec, 200°/sec average
Electrical
Input voltage
Power
24 VAC
91 W
Control
RS422 Digiplex 4800 baud
Environmental
Temperature range
-25°C to +50°C
Ordering Information
KTA-DE8-D2C
E 8" wall mount heavy duty vandal resistant CyberDome
E Thick aluminum housing with heather and fan and
8-inch, Heavy Duty CyberDome Day/Night, clear,
colour/monochrome
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
460 TVL colour / monochrome camera
0.7 lux colour sensitivity; 0.01 lux monochrome
18x optical zoom lens
Auto iris with manual override
Auto/manual focus
64 programmable presets
16 titles for Preset and Zone
Auto return function
two 4 minute shadow tours
360° continuous pan
Quick spin target tracking
Variable speeds up to 400°/sec
Twist-on dome attachments
Quick release connector
Twisted pair control
Cyberdome
Page : 58
KTA-DE8-H2C
8-inch, Heavy Duty CyberDome Select, clear, colour
The 8 inch heavy duty Colour cyberdome is perfect for applications
where vandalism is a problem. Designed to withstand physical abuses,
the heavy duty CyberDome features a thick aluminum upper housing
and an extra strong polycarbonate dome. This heavy duty CyberDome
is designed for indoor and outdoor applications and comes with a
built-in heather and fan. The heavy duty CyberDome uses an
integrated colour camera with an 18x optical zoom lens. Features
include auto iris with manual override, auto or manual focus, backlight
compensation, 32 programmable preset positions, preset and zone
titling, and two camera tours.
Specifications
Signal format
CCIR/PAL
Scanning system
2:1 interlacing
Scanning frequency
Horizontal
15.625 kHz
Vertical
50 Hz
Image sensor
1/4" solid-state interline transfer CCD image sensor
Picture elements
752 (H) x 582 (V)
Lens
F1.4, f=4.1~73.8 mm, 18X zoom, auto focus
Optical zoom
18X
Digital zoom
12X
Angle of view
H: 48° (wide), 2.7° (tele)
Focus length
Inf. ~0.01 m (wide) ~1.0 m (tele)
Sync. system
Internal, line lock
Horizontal resolution
460 TVL
Signal to noise ratio
More than 50 dB
Sensitivity
2 lux colour
Video output
Composite, 1.0 V pk-pk at 75 ohms load
Electronic shutter
1/3 ~ 1/10000 sec
Operational
Pan travel
360°
Tilt travel
90°
Speed in manual mode
0.5° to 120° / sec, variable
Speed in preset mode
Up to 400°/sec, 200°/sec average
Electrical
Input voltage
24 VAC
Power
91 W
Control
RS422 Digiplex 4800 baud
Environmental
Temperature range
-25°C to +50°
Ordering Information
KTA-DE8-H2C
8-inch, Heavy Duty CyberDome Select, clear, colour
E 8" wall mount heavy duty vandal resistant CyberDome
E Thick aluminum housing with heather and fan and
polycarbonate dome
E
E
E
E
E
E
E
E
E
E
E
E
E
E
460 TVL Colour camera
2 lux sensitivity
18x optical zoom lens
Auto iris with manual override
Auto/manual focus
32 programmable presets
16 titles for Preset and Zone
Auto return function
One 4 minute shadow tour
360° continuous pan
Variable speeds up to 400°/sec
Twist-on Dome attachments
Quick release connector
Twisted pair control
Cyberdome
Page : 59
KTA-20
CyberMount wall-arm
The KTA-20 is an integrated wall-mount bracket that allows a 7-inch
CyberDome to be suspended from a wall or other vertical surface. Its
innovative design provides a hidden path for video, 24VAC and RS422
data control cables. The KTA-20 also fits on other CyberDome
accessories, including the corner-mount, pole-mount and roof-mount
adapters. It is constructed of weather-resistant, ABS-plastic.
Specifications
Weight
0.227 kg
Material
ABS plastic
Finish
Gray epoxy
Ordering Information
KTA-20
CyberMount wall-arm
E
E
E
E
Options for many configurations to fit your needs
Easy installation
Durable finish and construction
Low cost
KTA-20C
CyberMount wall-arm with coax iInterface connector card
The KTA-20C is an integrated wall-mount bracket that allows a 7 inch
CyberDome to be suspended from a wall or other vertical surface. Its
innovative design provides a hidden path for video, 24 VAC and RS422
data control cables. It is available with a coaxial interface module. The
KTA-20C fits on other CyberDome accessories, including the
corner-mount, pole-mount and roof-mount adapters. It is constructed
of weather-resistant, ABS-plastic.
Specifications
Weight
0.227 kg
Material
ABS plastic
Finish
Gray epoxy
Ordering Information
KTA-20C
KTA-20
KTA-20T
CyberMount wall-arm
CyberMount wall-arm
Cybermount with UTP Interface Connector Card
E
E
E
E
Options for many configurations to fit your needs
Easy installation
Durable finish and construction
Low cost
Cyberdome
Page : 60
KTA-20T
Cybermount with UTP Interface Connector Card
The KTA-20T is an integrated wall-mount bracket that allows a 7 inch
CyberDome to be suspended from a wall or other vertical surface. Its
innovative design provides a hidden path for video, 24 VAC and RS422
data control cables. It is available with an UTP (unshielded twisted-pair)
interface module. The KTA-20T can also mate with other CyberDome
accessories, including the corner-mount, pole-mount and roof-mount
adapters. It is constructed of weather-resistant, ABS-plastic.
Specifications
Weight
0.227 kg
Material
ABS plastic
Finish
Gray epoxy
Ordering Information
KTA-20T
Cybermount with UTP Interface Connector Card
E
E
E
E
Options for many configurations to fit your needs
Easy installation
Durable finish and construction
Low cost
Corner mount adapter for KTA-20 or KTA-28 CyberDome wall bracket
KTA-25
The corner-mount adapter can be used with any of the wall-arm
mounts to suspend a 7 inch CyberDome from the corner of a building.
It can also be used to mount an 8 inch CyberDome with heavy-duty
housing. The corner-mount adapter is constructed of
weather-resistant aluminum.
Specifications
Weight
0.86 kg
Material
Aluminum
Finish
Gray powder coat
Ordering Information
KTA-25
Corner Mount Adapter for KTA-20 or KTA-28 CyberDome wall
bracket
E
E
E
E
Options for many configurations to fit your needs
Easy installation
Durable finish and construction
Low cost
Cyberdome
Page : 61
KTA-26
Pole-mount adapter
The pole-mount adapter can be used with any of the wall-arm mounts
to suspend a 7 inch CyberDome from a pole. The ple-mount adapter is
constructed of weather-resistant aluminum. It may be installed with
bolts or metal strips.
Specifications
Weight
0.41 kg
Material
Aluminum
Finish
Gray powder coat
Ordering Information
KTA-26
Pole-mount adapter
E
E
E
E
Options for many configurations to fit your needs
Easy installation
Durable finish and construction
Low cost
KTA-27
Roof-mount adapter
The roof-mount adapter can be used with any of the wall-arm mounts
to install a 7 inch CyberDome on the edge of a roof. It is hinged for
safe, easy-access dome services. It is constructed of weather-resistant
aluminum.
Specifications
Weight
0.54 kg
Material
Aluminum
Finish
Gray powder coat
Ordering Information
KTA-27
Roof-mount adapter
E
E
E
E
Options for many configurations to fit your needs
Easy installation
Durable finish and construction
Low cost
Cyberdome
Page : 62
KTA-28
Cast aluminum wall-Arm
The KTA-28 wall-arm bracket is made of sturdy cast aluminum for the
most rugged environments. The bracket can be used with all 7 inch
CyberDome housing options and with the standard pole-, corner- or
roof-mount adapters increasing your mounting options.
Specifications
Material
Aluminum
Finish
Gray
Ordering Information
KTA-28
Cast aluminum wall-Arm
E
E
E
E
Options for many configurations to fit your needs
Easy installation
Durable finish and construction
Low cost
KTA-30
Gooseneck wall mount bracket
This wall-mount is designed specifically for the new PressurDome. It
can be used with the pole-mount, roof-mount and corner-mount
adapters. The gooseneck wall-mount is constructed of heavy-duty
aluminum.
Ordering Information
KTA-30
Gooseneck wall mount bracket
E
E
E
E
Options for many configurations to fit your needs
Easy installation
Durable finish and construction
Low cost
Cyberdome
Page : 63
Pendant ceiling mount bracket, 0.3 m, 1.25 NPT thread
Pendant ceiling mount bracket, 0.3 m, 1.25 NPT thread
Ordering Information
ATA-CM1
ATA-CM2
ATA-CM3
Pendant ceiling mount bracket, 0.3 m, 1.25 NPT thread
Pendant ceiling mount bracket, 0.6 m 1.25 NPT thread
Pendant ceiling mount bracket, 1 m, 1.25 NPT thread
ATA-CM1
Cyberdome accessories
Page : 64
Power supply unit for all domes, 24 VAC, 3 Amps
Specifications
Electrical
Input voltage
230 VAC
Output voltage
24 VAC 3 A
Fuses
3.15 A
Environmental
Degree of protection
IP65
Ordering Information
ATD-6812-PSU
Power supply unit for all domes, 24 VAC, 3 Amps
ATD-6812-PSU
Cyberdome
Page : 65
KTA-38-C4P
CyberScout PAL with clear dome and 4 mm lens
CyberScout combines the essential features of a surveillance camera
in an economical, compact pan/tilt dome. The housing, camera and
operating features provide you with a variable-speed pan/tilt,
high-resolution colour camera, housed in a 12.5 cm, heavy-duty,
tamper-resistant, aluminum housing.
CyberScout's camera delivers 480 TVL of resolution. CyberScout also
features a 4 mm fixed-focal lens, 2x digital zoom, 64 programmable
presets and a 4-minute ShadowTour (a learned tour that enables you
to program up to four minutes of manual operation). CyberScout's
weather-resistant housing can be used indoor or outdoor. It operates
at temperatures ranging from -10 °C to +45 °C.
Specifications
Operational
Pan travel
360° (non continuous)
Tilt travel
90°
Speed
Manual
0.5° - 65°/sec variable
Preset
Up to 130°/sec
Signal system
PAL
Image sensor
1/3 in. interline high-sensitivity super HAD CCD
E 12.5 cm housing with 9.6 cm dome
E Integrated pan/tilt, colour camera
E Heavy-duty, weather-resistant, aluminum housing
Picture elements (H x V)
752 x 582 PAL
E Polycarbonate clear dome with optional
Scanning system
2:1 interlaced 625 lines, 50 fields
Sensitivity
3 lux
Camera
Electrical
Input voltage
24 VAC
Power
6 VA
Control input signal
RS422
Signal format
Digiplex protocol, ASCII open protocol
Video output
Composite, 1.0 V pk-pk at 75 ohms load
Connectors
Coaxial
Video: BNC
Control
Two-position terminal strip
Power input
Two-position terminal strip
Operating temperature
-10°C to +45°C
Mechanical
Weight
Housing, pan/tilt, shroud,and dome: 920 g
Flush-mount: 530 g
Wall-mount: 360 g
Surface-mount: 190 g
Construction
Housing
Aluminum
Dome
3 mm polycarbonate (clear or smoke)
Supplied adapters
Flush-mount: Aluminum
Wall-mount: Aluminum
Surface-mount: Aluminum
Housing: Powder coat
Finish
Adapters: Powder coat
Ordering Information
KTA-38-C4P
KTA-38-S4P
CyberScout PAL with clear dome and 4 mm lens
CyberScout PAL with smoked dome and 4 mm lens
tamper-resistant screws
E
E
E
E
E
E
E
E
E
Dome shroud to conceal camera position
Stand-alone autopan operation
64 programmable presets
4 minute ShadowTour
4 mm fixed-focal lens
2x digital zoom
480 TVL resolution
Autopan
24 VAC input voltage
Cyberdome
Page : 66
KTA-38-CVP
CyberScout, PAL with clear dome and 3.5-8 mm varifocal lens
CyberScout combines the essential features of a surveillance camera
in an economical, compact pan/tilt dome. The housing, camera and
operating features provide you with a variable-speed pan/tilt,
high-resolution colour camera, housed in a 12.5 cm, heavy-duty,
tamper-resistant, aluminum housing.
CyberScout's camera delivers 480 TVL of resolution. CyberScout also
features a 3.5-8 mm varifocal lens, 2X digital zoom, 64 programmable
presets and a 4-minute ShadowTour (a learned tour that enables you
to program up to four minutes of manual operation). CyberScout's
weather-resistant housing can be used indoor or outdoor. It operates
at temperatures ranging from -10 °C to + 45 °C.
Specifications
Operational
Pan travel
360° (non continuous)
Tilt travel
90°
Speed
Manual
0.5° - 65°/sec variable
Preset
Up to 130°/sec
Signal system
PAL
Image sensor
1/3 in. interline high-sensitivity super HAD CCD
E 12.5 cm housing with 9.6 cm dome
E Integrated pan/tilt, colour camera
E Heavy-duty, weather-resistant, aluminum housing
Picture elements (H x V)
752 x 582
E Polycarbonate smoked dome with optional
Scanning system
2:1 interlaced 625 lines, 50 fields
Sensitivity
3 lux
Camera
Electrical
Input voltage
24 VAC
Power
6 VA
Control input signal
RS422
Signal format
Digiplex protocol, ASCII open protocol
Video output
Composite, 1.0 V pk-pk at 75ohms load
Connectors
Coaxial
Video: BNC
Control
Two-position terminal strip
Power input
Two-position terminal strip
Operating temperature
-10°C to +45°C
Mechanical
Weight
Housing, pan/tilt, shroud and dome: 920 g
Flush-mount: 530 g
Wall-mount: 360 g
Surface-mount: 190 g
Construction
Housing
Aluminum
Dome
3 mm polycarbonate (clear or smoke)
Supplied adapters
Flush-mount: Aluminum
Wall-mount: Auminum
Surface-mount: Aluminum
Housing: powder coat
Finish
Adapters: powder coat
Ordering Information
KTA-38-CVP
KTA-38-SVP
CyberScout, PAL with clear dome and 3.5-8 mm varifocal
lens
CyberScout, PAL with smoked dome and 3.5-8mm Varifocal
Lens
tamper-resistant screws
E
E
E
E
E
E
E
E
E
Dome shroud to conceal camera position
Stand-alone autopan operation
64 programmable presets
4-minute ShadowTour
3.5-8 mm varifocal lens
2X digital zoom
480 TVL resolution
Autopan
24 VAC input voltage
Cyberdome
Page : 67
KTA-38-S4P
CyberScout PAL with smoked dome and 4 mm lens
CyberScout combines the essential features of a surveillance camera
in an economical, compact pan/tilt dome. The housing, camera and
operating features provide you with a variable-speed pan/tilt,
high-resolution colour camera, housed in a 12.5 cm, heavy-duty,
tamper-resistant, aluminum housing.
CyberScout's camera delivers 480 TVL of resolution. CyberScout also
features a 4 mm fixed-focal lens, 2X digital zoom, 64 programmable
presets and a 4-minute ShadowTour (a learned tour that enables you
to program up to four minutes of manual operation). CyberScout's
weather-resistant housing can be used indoor or outdoor. It operates
at temperatures ranging from -10 °C to +45 °C.
Specifications
Operational
Pan travel
360° (non continuous)
Tilt travel
90°
Speed
Manual
0.5° - 65°/sec variable
Preset
Up to 130°/sec
Signal system
PAL
Image sensor
1/3 in. interline high-sensitivity super HAD CCD
E 12.5 cm housing with 9.6 cm dome
E Integrated pan/tilt, colour camera
E Heavy-duty, weather-resistant, aluminum housing
Picture elements (H x V)
752 x 582
E Polycarbonate smoked dome with optional
Scanning system
2:1 interlaced 625 lines, 50 fields
Sensitivity
3 lux
Camera
Electrical
Input voltage
24 VAC
Power
6 VA
Control input signal
RS422
Signal format
Digiplex protocol, ASCII open protocol
Video output
Composite, 1.0 V pk-pk at 75ohms load
Connectors
Coaxial
Video: BNC
Control
Two-position terminal strip
Power input
Two-position terminal strip
Operating temperature
-10°C to +45°C
Mechanical
Weight
Housing, pan/tilt, shroud and dome: 920 g
Flush-mount: 530 g
Wall-mount: 360 g
Surface-mount: 190 g
Construction
Housing
Aluminum
Dome
3 mm polycarbonate (clear or smoke)
Supplied adapters
Flush-mount: Aluminum
Wall-mount: Auminum
Surface-mount: Aluminum
Housing: powder coat
Finish
Adapters: powder coat
Ordering Information
KTA-38-S4P
KTA-38-C4P
CyberScout PAL with smoked dome and 4 mm lens
CyberScout PAL with clear dome and 4 mm lens
tamper-resistant screws
E
E
E
E
E
E
E
E
E
Dome shroud to conceal camera position
Stand-alone autopan operation
64 programmable presets
4-minute ShadowTour
4 mm fixed-focal lens
2X digital zoom
480 TVL resolution
Autopan
24 VAC input voltage
Cyberdome
Page : 68
KTA-38-SVP
CyberScout, PAL with smoked dome and 3.5-8mm Varifocal Lens
CyberScout combines the essential features of a surveillance camera
in an economical, compact pan/tilt dome. The housing, camera and
operating features provide you with a variable-speed pan/tilt,
high-resolution colour camera, housed in a 12.5 cm, heavy-duty,
tamper-resistant, aluminum housing.
CyberScout's camera delivers 480 TVL of resolution. CyberScout also
features a 3.5-8mm varifocal lens, 2X digital zoom, 64 programmable
presets and a 4-minute ShadowTour (a learned tour that enables you
to program up to four minutes of manual operation). CyberScout's
weather-resistant housing can be used indoor or outdoor. It operates
at temperatures ranging from -10 °C to + 45 °C.
Specifications
Operational
Pan travel
360° (non continuous)
Tilt travel
90°
Speed
Manual
0.5° - 65°/sec variable
Preset
Up to 130°/sec
Signal system
PAL
Image sensor
1/3 in. interline high-sensitivity super HAD CCD
E 12.5 cm housing with 9.6 cm dome
E Integrated pan/tilt, colour camera
E Heavy-duty, weather-resistant, aluminum housing
Picture elements (H x V)
752 x 582
E Polycarbonate smoked dome with optional
Scanning system
2:1 interlaced 625 lines, 50 fields
Sensitivity
3 lux
Camera
Electrical
Input voltage
24 VAC
Power
6 VA
Control input signal
RS422
Signal format
Digiplex protocol, ASCII open protocol
Video output
Composite, 1.0 V pk-pk at 75ohms load
Connectors
Coaxial
Video: BNC
Control
Two-position terminal strip
Power input
Two-position terminal strip
Operating temperature
-10°C to +45°C
Mechanical
Weight
Housing, pan/tilt, shroud and dome: 920 g
Flush-mount: 530 g
Wall-mount: 360 g
Surface-mount: 190 g
Construction
Housing
Aluminum
Dome
3 mm polycarbonate (clear or smoke)
Supplied adapters
Flush-mount: Aluminum
Wall-mount: Auminum
Surface-mount: Aluminum
Housing: powder coat
Finish
Adapters: powder coat
Ordering Information
KTA-38-SVP
KTA-38-CVP
CyberScout, PAL with smoked dome and 3.5-8mm Varifocal
Lens
CyberScout, PAL with clear dome and 3.5-8 mm varifocal
lens
tamper-resistant screws
E
E
E
E
E
E
E
E
E
Dome shroud to conceal camera position
Stand-alone autopan operation
64 programmable presets
4-minute ShadowTour
3.5-8 mm varifocal lens
2X digital zoom
480 TVL resolution
Autopan
24 VAC input voltage
Cyberdome
Page : 69
KTA-PH-38
CyberScout pendant mount hood
This pendant mount hood allows an easy installation of the
CyberScout on a pendant ceiling bracket.
Specifications
Material
Aluminum
Finish
Gray powder coat
Ordering Information
KTA-PH-38
CyberScout pendant mount hood
E Easy installation on a 1.25 NPT threaded bracket
E Durable finish and construction
E Low cost
KTA-PM-38
Cyberscout pole-mount adapter
The pole-mount adapter is designed to mount a CyberScout on a pole.
The pole-mount adapter is constructed of weather-resistant aluminum.
It may be installed with bolts or metal straps.
Specifications
Material
Aluminum
Finish
Gray powder coat
Ordering Information
KTA-PM-38
Cyberscout pole-mount adapter
E Easy installation
E Durable finish and construction
E Low cost
Cyberdome
Page : 70
KTA-CM-38
CyberScout corner-mount Adaptor
The corner-mount adaptor is designed to mount a CyberScout on the
corner of a building. The corner-mount is constructed of weather
resistant aluminum.
Specifications
Material
Aluminum
Finish
Gray powder coat
Ordering Information
KTA-CM-38
CyberScout corner-mount Adaptor
E Easy installation
E Durable finish and construction
E Low cost
CONTROLLER KEYPADS
To control and operate Cyberdomes, matrix switchers and digital recorders
Controller Keypad
Page : 73
KTD-400U
Universal multi-speed Digiplex system control
The KTD-400 is a keypad that controls Digiplex system components. It
can address and manage 512 PTZ (pan/tilt/zoom) receiver sites,
operate a matrix switcher with 64 monitor outputs and address and
select views from as many as 64 multiplexers. Its multispeed control
feature allows users to toggle between slow, medium and fast speed
control for PTZ camera assemblies.
Authorized personnel may program the keypad and other Digiplex
components through confidential access codes. Programmable
components include CyberDomes, PTZ receivers, matrix video
switchers and alarm interfaces. All data is stored in nonvolatile
memory.
The KTD-400 keypad is housed in high-impact, injection-moulded
plastic. It is fitted with low profile, easy-to-read keys and a backlit,
liquid crystal display (LCD). It communicates with other Digiplex
components through a RS422 signal over twisted-pair wire. It also
offers a DTMF output for mini-matrix video switcher control.
Specifications
Electrical
Input voltage
12 VDC (except for LT version)
Input power
3.3 VAC (except for LT version)
Input data signal
RS422
Output data signal
RS422
Control
Momentary push buttons
Display
20 x 2 character liquid crystal display (LCD) with back
lighting
RJ45 modular phone jack
Connection
Mechanical
Weight
0.43 kg
Construction
High-impact, injection-moulded ABS plastic
Colour
Gray
Ordering Information
KTD-400U
Universal multi-speed Digiplex system control
E
E
E
E
E
E
E
E
E
Control for up to 512 PTZ sites
Matrix switcher operation
Programmable nonvolatile memory
Multi-speed CyberDome control
Twisted-pair control
Liquid crystal display
Compact and attractive keypad
Injection-moulded housing
Rack-mount format available
Controller Keypad
Page : 74
KTD-405AU
Variable speed controller keypad with audio amplifier
GE Security's new KTD-405AU combines GE Security multiplexer and
Digiplex® system control in one unit.
An RS422/RS485 communication port makes it possible for the
KTD-405AU to operate DVMRe's, multiplexers and CyberDomes; select
and switch video; initiate camera tours and select monitors.
Programmable components include multiplexers, CyberDomes,
CyberScout, matrix switchers and alarm interfaces.
The KTD-405AU can be set to operate in one of three modes: discrete
zone, transparent zone and standard Digiplex. In discrete and
transparent zone modes, the system can be divided into 32 zones with
up to 64 cameras in each zone. Multiplexers and matrix switchers can
be used in these modes. In standard Digiplex mode, a matrix switcher
is the system's primary switching device.
Other features include an audio channel, a three-axis joystick for
exceptional pan/tilt precision in CyberDome applications, dedicated
recorder operation keys and an RS232 programming port.
When alarm alerts occur, a built-in sounder alerts the user that
attention is needed. The KTD-405AU can stack up to 32 alarm requests
in the order they were received. The first three alarm requests will be
displayed and a reminder tone will sound every 15 seconds until all
active alarms have been cleared from its queue. Authorized personnel
may program the KTD-405AU and other Digiplex or Calibur
components through confidential access codes.
The KTD-405AU features dark grey, ergonomic housing, rubberised
buttons and a backlit liquid crystal display.
Specifications
Input voltage
9 VAC/12 VDC
Power
5W
Output
Data
RS485 modified multiplexer protocol RJ45 connector
Data
RS422 modified Digiplex protocol, RJ45 connector
Data
RS232, RJ45 connector
Output 2
RJ11 audio bus
Hard programming
4-position DIP switch
Audio
Sound tranducer
Intervox part no. BRT1209P-06-C
Audio amplifier
2 W, 8 ohms, RJ11 connector
Controls
Keys
48 momentary push buttons
Joystick
3-axis
Mechanical
Weight
0.884 kg
Housing
Aluminum with ABS plastic end caps
Colour
Dark gray
Keys
Integrated rubberised moulding (elastomere)
Ordering Information
KTD-405AU
Variable speed controller keypad with audio amplifier
E Cyberdome, Digiplex matrix switcher and digital
recorders control
E
E
E
E
E
E
E
RS422/RS485 and RS232 communication ports
Zone system partitioning for DVMRE control
Security levels
Three-axis joystick
Built-in sounder
Backlit liquid crystal display
Built in 2 W, 8 ohm audio amplifier
Controller Keypad
Page : 75
KTD-405U
Variable speed controller keypad
GE Security's new KTD-405U combines multiplexer and Digiplex®
system control in one unit.
An RS422/RS485 communication port makes it possible for the
KTD-405U to operate DVMRe's, multiplexers and CyberDomes; select
and switch video; initiate camera tours and select monitors.
Programmable components include multiplexers, CyberDomes,
CyberScout, matrix switchers and alarm interfaces.
The KTD-405U can be set to operate in one of three modes: discrete
zone, transparent zone and standard Digiplex. In discrete and
transparent zone modes, the system can be divided into 32 zones with
up to 64 cameras in each zone. Multiplexers and matrix switchers can
be used in these modes. In standard Digiplex mode, a matrix switcher
is the system's primary switching device.
Other features include a three-axis joystick for exceptional pan/tilt
precision in CyberDome applications, dedicated recorder operation
keys and an RS232 programming port.
When alarm alerts occur, a built-in sounder alerts the user that
attention is needed. The KTD-405U can stack up to 32 alarm requests
in the order they were received. The first three alarm requests will be
displayed and a reminder tone will sound every 15 seconds until all
active alarms have been cleared from its queue. Authorized personnel
may program the KTD-405U and other Digiplex or Calibur components
through confidential access codes.
The KTD-405U features dark grey, ergonomic housing, rubberised
buttons and a backlit liquid crystal display.
Specifications
Input voltage
9 VAC/12 VDC
Power
5W
Outputs
Data
RS485 modified multiplexer protocol, RJ45 connector
Data
RS422 modified Digiplex protocol, RJ45 connector
Data
RS232, RJ45 connector
Hard programming
4-position DIP switch
Controls
Keys
43 momentary push buttons (48 audio ven.)
Joystick
3-axis
Mechanical
Weight
0.884 kg
Housing
Aluminum with ABS plastic end caps
Colour
Dark gray
Keys
Integrated rubberised moulding (elastomere)
Ordering Information
KTD-405U
Variable speed controller keypad
E Cyberdome, Digiplex matrix switcher and digital
recorders control
E
E
E
E
E
E
RS422/RS485 and RS232 communications ports
Zone system partitioning for DVMRE control
Security levels
Three axis joystick
Built-in annunciator
Backlit liquid crystal display
VideoIQ
GE Security VideoIQ creates a new standard for human detection applications.
VideoIQ
Page : 79
VIQ-8HD
VideoIQ system with LCD monitor
VideoIQ creates a new standard for human detection applications with
CCTV cameras. VideoIQ improves the efficiency of a security system,
minimizing false alarms, particularly in challenging outdoor
environments. VideoIQ uses GE Security proprietary technology to go
far beyond what video motion detection can deliver, accurately
detecting human activity 95 percent of the time.
Specifications
VIQ-8HD Series
PC supplied
CPU
3.2 GHz
RAM
512 MB
Hard disk drive
80 GB EIDE
Internal drive
Floppy drive, CD-ROM
Ports
2 DB9 male RS232 ports, VGA port
Capture card
Frame Grabber Cronos Plus card
Monitor VGA
15 in LCD flat panel monitor
Operating system
Windows XP Professional and VideoIQ application
Power
100 to 250 VAC, 50/60 Hz
Power consumption
350 W
Inputs
both alarms and associated video
Video inputs
8
Video format
NTSC or PAL
Outputs
Video output
1 VGA
Alarm output
8 TTL levels
Alarm I/O levels
Active high or low, selectable
Mechanical
Dimensions
441 x 450 x 177 mm
Weight
16 kg
Operating temperature
0º to 55º C
Cables
E Detects humans in dynamic outdoor environments
E Distinguishes between humans and other moving
objects
E Ignores dynamic background motion and focuses on
foreground objects of interest
E NTSC and PAL compatible
E Eight-channel, PC-based system that integrates with
existing DVMRe systems (5.02 or higher)
E Eight individual alarm outputs with programmable
duration
RS-232
10 ft DB9 (female) to DB9 (female) null modem
I/O Board for alarm output
Compatible digital video
multiplexers and recorders
DVMRe Multiplexer/Recorder Version 5.02 or higher
Ordering Information
VIQ-8HD
E Video-based human detection system that provides
VideoIQ system with LCD monitor
E LCD monitor supplied
VideoIQ
Page : 80
VIQ-8HDX
VideoIQ system
VideoIQ creates a new standard for human detection applications with
CCTV cameras. VideoIQ improves the efficiency of a security system,
minimizing false alarms, particularly in challenging outdoor
environments. VideoIQ uses GE Security proprietary technology to go
far beyond what video motion detection can deliver, accurately
detecting human activity 95 percent of the time.
Specifications
VIQ-8HD Series
PC supplied
CPU
3.2 GHz
RAM
512 MB
Hard disk drive
80 GB EIDE
Internal drive
Floppy drive, CD-ROM
Ports
2 DB9 male RS232 ports, VGA port
Capture card
Frame Grabber Cronos Plus card
Operating system
Windows XP Professional and VideoIQ application
Power
100 to 250 VAC, 50/60 Hz
Power consumption
350 W
Inputs
Video inputs
8
Video format
NTSC or PAL
Outputs
Video output
1 VGA
Alarm output
8 TTL levels
Alarm I/O levels
Active high or low, selectable
E Video-based human detection system that provides
both alarms and associated video
E Detects humans in dynamic outdoor environments
E Distinguishes between humans and other moving
objects
E Ignores dynamic background motion and focuses on
foreground objects of interest
Mechanical
Dimensions
441 x 450 x 177 mm)
Weight
16 kg
Operating temperature
0º to 55º C
Cables
RS-232
10 ft DB9 (female) to DB9 (female) null modem
E NTSC and PAL compatible
E Eight-channel, PC-based system that integrates with
existing DVMRe systems (5.02 or higher)
E Eight individual alarm outputs with programmable
duration
I/O Board for alarm output
Compatible digital video
multiplexers and recorders
DVMRe Multiplexer/Recorder Version 5.02 or higher
(not included)
Ordering Information
VIQ-8HDX
VideoIQ system
E No LCD monitor supplied
DIGITAL MULTIPLEXERS
The GE Security range of multiplexers are ideal for applications
where high quality multiplexing is required.
Multiplexers
Page : 83
CBR-16CSX
16-camera colour simplex video multiplexer
The CBR-16CSX is ideal for applications where recording performance,
automation and system control are desired, yet economy and ease of
use are required. Live cameras are displayed in full or sequencing
full-screen, while full-resolution pictures from all cameras are sent to a
recorder. Patented Parallel Video Processing (PVP) outputs up to 50
unique pictures to your recorder, delivering more recorded
documentation than conventional multiplexers. VEXT automatically
optimizes multiplexer/recorder synchronization and prevents loss of
critical pictures regardless of record speed or how often record speeds
change.
Specifications
Video
Display memory
Colours
2048 x 2048 memory array, 32 Mb total display
memory
YUV 4:2:2, 16.8 million colours
Grayscale
256 levels
Horizontal resolution
720 pixels
Vertical resolution
576 active lines PAL/CCIR
Sampling rate
17.7 MHz PAL/CCIR
Alarm handling
Alarm inputs
16 programmable NO or NC in menus
Alarm latching
3 settings: latched; transparent; timed-out.
Programmable 1-100 seconds.
Automatic priority control, interleaved, exclusive or
none. Programmable.
Automatic switch to alarmed camera
Alarm recording
Alarm displays
Video motion and activity
detection
Zones per camera
256, 16 x 16 grid
Sensitivity settings
10 levels with active feedback setup scope
Gray levels per zone
256 levels
False-alarm-rejection
processing
3 levels
Size discrimination
256 levels
Recording priority
2x, 4x, interleaved or none
Status output
Link to relays
Remote control and
programming
RS232
DB9, female. 3-wire, N-8-1, baud rate selectable in
menus. Allows remote programming of menus,
upload of status data, remote control of front panel
buttons.
RJ45, remote keyboard input, looping, up to 1000 m
without adapters. Time I/O system. Allows remote
programming of menus, upload of status data,
remote control of front panel buttons.
RS485
Miscellaneous
Input voltage
12 VDC, adapter 90 - 264 VAC to 12 VDC included.
Power
25 W nominal
Operating temperature
0 °C to +40 °C
Relative humidity
90%, noncondensing
Dimensions
444 x 360 x 43 mm
Weight
4 kg
Ordering Information
CBR-16CSX
16-camera colour simplex video multiplexer
E PVP ultrafast monitor update speed
E VEXT automatic record speed synchronization
E Video motion detection (intrusion) and activity
detection with active feedback setup scope
E Live in full-screen, sequencing, PIP, quad, 7, 9, 10, 13 or
16-up display
E
E
E
E
E
E
Independent monitor A/B sequence and dwell times
One-touch "freeze"
Electronic PTZ
16 alarm inputs, 2 relay outputs
16 macros
Plays back tapes made by other multiplexers brands
Multiplexers
Page : 84
CBR-10MDX
10-Camera monochrome duplex multiplexer
The CBR-10MDX is ideal for applications where high-resolution
multiscreen live and playback display are required and budget is a
concern. Live cameras can be viewed in any of several different
multiscreen formats, while full-resolution pictures from all cameras are
sent to a recorder. Patented, Parallel Video Processing (PVP) outputs up
to 50 unique pictures per second to your monitor and delivers
closer-to-real-time display than conventional multiplexers. VEXT
automatically optimizes multiplexer/recorder synchronization and
prevents loss of critical pictures regardless of record speed or how
often record speeds change.
Specifications
Video
Display memory
Grayscale
2048 x 2048 memory array, 32 Mb live/play plus 32
Mb Record = 64 Mb total display memory
256 levels
Horizontal resolution
720 pixels
Vertical resolution
576 active lines PAL/CCIR
Sampling rate
17.7 MHz PAL/CCIR
Alarm handling
Alarm inputs
10 programmable NO or NC setup in menus
Alarm outputs
2 form C relays, each NO and NC. Rated 0.5 A
continuous, 1.0 A momentary.
3 settings: latched; transparent; timed-out.
Programmable 1-100 seconds.
Automatic priority control, interleaved , exclusive or
none. Programmable.
Automatic switch to alarmed camera
Alarm latching
Alarm recording
Alarm displays
Video motion and activity
detection
256, 16 x 16 grid
Sensitivity settings
10 levels with active feedback setup scope
Gray levels per zone
256 levels
False-alarm-rejection
processing
3 levels
Size discrimination
256 levels
Recording priority
2x, 4x, interleaved, or none
Status output
Link to relays, alarms
Remote control and
programming
DB9, female. 3-wire, N-8-1, baud rate selectable in
menus. Allows remote programming of menus,
upload of status data, remote control of front panel
buttons.
RJ45, remote keyboard input, looping, up to 1000 m
without adapters. Time I/O system. Allows remote
programming of menus, upload of status data,
remote control of front panel buttons.
RS485
Miscellaneous
Input Voltage
12 VDC, adapter 90 - 264 VAC to 12 VDC included
Power
25 W nominal
Operating temperature
0 °C to +40°C
Relative Humidity
90%, noncondensing
Dimensions
444 mm x 360 mm x 43 mm
Weight
4 kg
Ordering Information
CBR-10MDX
detection with active feedback setup scope
E Live in full-screen, sequencing, PIP, quad, 7, 9 or 10-up
display
E Covert camera feature removes selected camera(s)
Zones per camera
RS232
E PVP ultrafast monitor update speed
E VEXT automatic record speed synchronization
E Video motion detection (intrusion) and activity
10-Camera monochrome duplex multiplexer
from display without altering recording
E
E
E
E
One-touch "freeze"
Electronic PTZ
10 alarm inputs, 2 relay outputs
Plays back tapes made by other multiplexers brands
Multiplexers
Page : 85
CBR-10EZX
10-Camera eZ series duplex multiplexer
The CBR-10EZX is well-suited for quick and easy installation and
operation in stand-alone applications. Along with ease of use, the
CBR-10EZX offers exceptional live monitoring and multiscreen live and
playback display. This 10-channel, eZ series multiplexer is available in
colour or monochrome models. Use the CBR-10EZX to view cameras in
any of three different multiscreen formats while full resolution pictures
from all cameras are sent to a recorder. Patented Parallel Video
Processing (PVP) outputs up to 50 pictures per second to your monitor,
delivering closer to real-time display than conventional multiplexers.
VEXT automatically optimizes multiplexer/recorder synchronization
and prevents loss of critical pictures regardless of record speed or how
often record speeds change.
Specifications
Video
Display memory
Colors
2048 x 2048 memory array, 32 MB live/play plus 32
MB record = 64 MB total display memory
YUV 4:2:2, 16.8 million colors
Grayscale
256 levels
Horizontal resolution
720 pixels
Vertical resolution
576 active lines (PAL/CCIR)
Sampling rate
17.7 MHz (PAL/CCIR)
Alarm Handling and Video Loss
Alarm inputs
10 programmable NO or NC in menus
Alarm outputs
2 form C relays, each NO and NC. Rated 0.5 A
continuous, 1.0 A momentary. One relay active while
an alarm is active, one active during video loss.
Video Motion and Activity
Detection
Zones per camera
256, 16 x 16 grid, programmable
Gray levels per zone
256 levels
Sensitivity settings
10 levels with active feedback setup scope
Activity recording
Automatic priority control, interleaved
Intrusion
Link to alarms, programmable per camera
automatic colour/mono detection, automatic setup of
sequencing lists and record lists, automatic gain
control
E PVP ultrafast monitor update speed
E VEXT automatic record speed synchronization to
simplify installation
E One-touch recorder view for easy recorder setup
E Video motion detection (intrusion) and activity
detection with active feedback setup scope
E Live in full-screen, sequencing, quad, 9-up, or 10-up
display
E Covert camera feature removes selected camera(s)
Miscellaneous
Input voltage
12 VDC, adapter 90 - 264 VAC to 12 VDC included
Power
25 W nominal
Operating temperature
0ºC to +40º C
Relative humidity
90 percent, noncondensing
Dimensions
444 mm x 360 mm x 43 mm
Weight
4 kg
Inputs
Camera
16 looping, BNC connectors PAL/CCIR compatible
Recorder
PAL/CCIR compatible, BNC connector
Conditioning
AGC, 0.7 to 2.0 V pk-pk video accepted
Termination
Manual ON/OFF 75 ohm on rear panel, per camera
Outputs
Monitor
2: 1 MON-A multiscreen output, BNC connector,
NTSC/EIA or PAL/CCIR compatible; 1 MON-B full screen
switched, BNC connector, NTSC/EIA or PAL/CCIR
compatible
PAL/CCIR compatible, BNC connector
VCR
Ordering Information
CBR-10EZX
E AutoInstall with automatic camera detection,
10-Camera eZ series duplex multiplexer
from display without altering recording
E One-touch freeze
E Plays back tapes made by other multiplexer brands
Multiplexers
Page : 86
CBR-10MEZX
10-Camera eZ series monochrome duplex multiplexer
The CBR-10MEZX is well-suited for quick and easy installation and
operation in stand-alone applications. Along with ease of use, the
CBR-10MEZX offers exceptional live monitoring and multiscreen live
and playback display. This 10-channel, eZ series multiplexer is
available in color or monochrome models. Use the CBR-10MEZX to
view cameras in any of three different multiscreen formats, while full
resolution pictures from all cameras are sent to a recorder.
Patented Parallel Video Processing (PVP) outputs up to 50 pictures per
second to your monitor, delivering closer to real-time display than
conventional multiplexers.
VEXT automatically optimizes multiplexer/recorder synchronization
and prevents loss of
critical pictures regardless of record speed or how often record speeds
change.
Specifications
Video
Display memory
Grayscale
2048 x 2048 memory array, 32 MB live/play plus 32
MB record = 64 MB total display memory
256 levels
Horizontal resolution
720 pixels
Vertical resolution
576 active lines (CCIR)
Sampling rate
17.7 MHz CCIR
Alarm Handling and Video Loss
Alarm inputs
10 programmable NO or NC in menus
Alarm outputs
2 form C relays, each NO and NC. Rated 0.5 A
continuous, 1.0 A momentary. One relay active while
an alarm is active, one active during video loss.
Video Motion and Activity
Detection
256, 16 x 16 grid, programmable
Gray levels per zone
256 levels
Sensitivity settings
10 levels with active feedback setup scope
Activity recording
Automatic priority control, interleaved
Intrusion
Link to alarms, programmable per camera
Miscellaneous
Input voltage
12 VDC, adapter 90 -264 VAC to 12 VDC included
Power
25 W nominal
Operating temperature
0ºC to +40º C
Relative humidity
90 percent, noncondensing
Dimensions
17.5 in x 14 in x 1.7 in (444 mm x 360 mm x 43 mm)
Weight
4 kg
Inputs
Camera
16 looping, BNC connectors
Recorder
1 BNC connector
Conditioning
AGC, 0.7 to 2.0 V pk-pk video accepted
Termination
Manual ON/OFF 75 ohm on rear panel, per camera
Monitor
2: 1 MON-A multiscreen output, BNC connector,
NTSC/EIA or PAL/CCIR compatible; 1 MON-B full screen
switched, BNC connector, NTSC/EIA or PAL/CCIR
compatible
PAL/CCIR compatible, BNC connector
Ordering Information
CBR-10MEZX
simplify installation
E One-touch recorder view for easy recorder setup
E Video motion detection (intrusion) and activity
detection with active feedback setup scope
E Live in full-screen, sequencing, quad, 9-up, or 10-up
display
Zones per camera
VCR
E PVP ultrafast monitor update speed
E VEXT automatic record speed synchronization to
10-Camera eZ series monochrome duplex multiplexer
E One-touch freeze
E Electronic PTZ
E 10 alarm inputs, 2 relay outputs (one for alarms, one
for video loss)
E Plays back tapes made by other multiplexer brands
E Time, date, and titling display
Multiplexers
Page : 87
CBR-16EZX
16-camera colour duplex multiplexer
The CBR-16eZ is ideal for applications that require quick and easy
installation and operation in stand-alone applications. Along with ease
of use, the CBR-16eZ offers exceptional live monitoring and
multiscreen live and playback display. Cameras can be viewed in any
of three different multiscreen formats, while full-resolution pictures
from all cameras are sent to a recorder. Patented Parallel Video
Processing (PVP) outputs up to 50 unique pictures per second to your
monitor and delivers closer-to-real-time display than conventional
multiplexers. VEXT automatically optimizes multiplexer/recorder
synchronization and prevents loss of critical pictures regardless of
record speed or how often record speeds change.
Specifications
Video
Display memory
Colours
2048 x 2048 memory array, 32 Mb live/play plus 32
Mb record = 64 Mb total display memory
YUV 4:2:2, 16.8 million colours
Grayscale
256 levels
Horizontal resolution
720 pixels
Vertical resolution
576 active lines PAL/CCIR
Sampling rate
17.7 MHz (PAL/CCIR),
Alarm handling and video loss
Alarm inputs
16 programmable NO or NC in menus
Alarm outputs
Alarm recording
2 form C relays, each NO and NC. Rated 0.5 A
continuous, 1.0 A momentary. One relay active while
an alarm is active, one active during video loss.
3 settings: latched; transparent; timed-out.
Programmable 1-99 seconds.
Automatic priority control, interleaved
Alarm displays
Automatically switch to alarmed camera
Alarm latching
Video motion and activity
detection
256, 16 x 16 grid, programmable
Gray levels per zone
256 levels
Sensitivity settings
10 levels with active feedback setup scope
Activity recording
Automatic priority control, interleaved
Intrusion
Link to alarms, programmable per camera
Miscellaneous
Input voltage
12 VDC, adapter 90 - 264 VAC to 12 VDC included.
Power
25 W nominal
Operating temperature
0 °C to +40 °C
Relative humidity
90%, noncondensing
Dimensions
444 x 360 x 43 mm
Weight
4 kg
Inputs
Camera
16 looping, BNC connectors,
Recorder
1 BNC connector
Conditioning
AGC, 0.7 to 2.0 V pk-pk video accepted
Termination
Manual ON/OFF 75 ohm on rear panel, per camera
Outputs
2: 1 MON-A multiscreen output, BNC connector; 1
MON-B full screen switched, BNC connector,
1 BNC connector
VCR
Ordering Information
CBR-16EZX
simplify installation
E One-touch recorder view for easy recorder setup
E Video motion detection (intrusion) and activity
detection with active feedback setup scope
E Live in full-screen, sequencing, quad, 9-up or 16-up
display
E Covert camera feature removes selected camera(s)
Zones per camera
Monitor
E PVP ultrafast monitor update speed
E VEXT automatic record speed synchronization to
16-camera colour duplex multiplexer
from display without altering recording
E One-touch "freeze"
E 16 alarm inputs, 2 relay outputs (one for alarms, one
for video loss)
E Plays back tapes made by other multiplexer brands
Multiplexers
Page : 88
CBR-10CDTX
10-Camera colour triplex video multiplexer
The Triplex offers today's best playback and live display, system
automation and alarm management. Cameras can be viewed in any of
several different multiscreen formats while full-resolution pictures from
all cameras are sent to a recorder. Unique triplex performance displays
a custom mix of live and playback images simultaneously on one
monitor. Patented Parallel Video Processing (PVP) outputs up to 50
unique pictures to your monitor and recorder to deliver more recorded
documentation and closer-to-real-time display than conventional
multiplexers. VEXT automatically optimizes multiplexer/monitor
synchronization and prevents loss of critical pictures regardless of
record speed or how often record speeds change.
Specifications
Video
Display memory
Colours
2048 x 2048 memory array, 32 Mb live/play plus 32
Mb Record = 64 Mb total display memory
YUV 4:2:2, 16.8 million colours
Grayscale
256 levels
Horizontal resolution
720 pixels
Vertical resolution
576 active lines PAL/CCIR
Sampling rate
17.7 MHz (PAL/CCIR)
Alarm handling
Alarm inputs
10 NO or NC set up in menus
Alarm outputs
2 form C relays, each NO and NC. Rated 0.5 A
continuous, 1.0 A momentary
3 settings: latched; transparent; timed-out.
Programmable 1-100 seconds.
Automatic priority control, interleaved, exclusive or
none. Programmable.
Automatic alarm multiscreens, programmable
Alarm latching
Alarm recording
Alarm displays
Video motion and activity
detection
Zones per camera
256, 16 x 16 grid
Sensitivity settings
10 levels
Gray levels per zone
256 levels
False-alarm-rejection
processing
3 levels
Size discrimination
256 levels
Recording priority
2x, 4x, interleaved or none
Status output
Link to relays, alarms
Remote control and
programming
RS232
DB-9, female. 3-wire, N-8-1, baud rate selectable in
menus. Allows remote programming of menus,
upload of status data, remote control of front panel
buttons.
RJ45, remote keyboard input, looping, up to 1000 m
without adapters. System time I/O.
RS485
Miscellaneous
Input Voltage
12 VDC, adapter 90 - 264 VAC to 12 VDC included.
Power
25 W nominal
Operating temperature
0 °C to +40 °C
Relative humidity
90%, noncondensing
Dimensions
444 x 360 x 43 mm
Weight
4 kg
Ordering Information
CBR-10CDTX
10-Camera colour triplex video multiplexer
E Triplex simultaneous live and playback on one monitor
E PVP ultrafast VCR and monitor update speed
E VEXT automatic VCR record speed synchronization
E Video Motion Detection (intrusion) and Activity
detection with active feedback setup scope
E Live in full-screen, sequencing, PIP, quad, 7, 9 or 10-up
display
E 10 alarm inputs, 2 relay outputs
Multiplexers
Page : 89
CBR-16CDTX
16-Camera colour triplex video multiplexer
The CBR-16CDTX offers today's best playback and live display, system
automation and alarm management. Cameras can be viewed in any of
several different multiscreen formats, while full-resolution pictures
from all cameras are sent to a recorder. Unique triplex performance
displays a custom mix of live and playback images simultaneously on
one monitor. Patented Parallel Video Processing (PVP) outputs up to 50
unique pictures to your monitor and recorder to deliver more recorded
documentation and closer-to-real-time display than conventional
multiplexers. VEXT automatically optimizes multiplexer/recorder
synchronization and prevents loss of critical pictures regardless of
record speed or how often record speeds change.
Specifications
Video
Display memory
Colours
2048 x 2048 memory array, 32 Mb live/play plus 32
Mb Record = 64 Mb total display memory
YUV 4:2:2, 16.8 million colours
Grayscale
256 levels
Horizontal resolution
720 pixels
Vertical resolution
576 active lines PAL/CCIR
Sampling rate
17.7 MHz (PAL/CCIR)
Alarm handling
Alarm inputs
16 NO or NC set up in menus
Alarm outputs
2 form C relays, each NO and NC. Rated 0.5 A
continuous, 1.0 A momentary
3 settings: latched; transparent; timed-out.
Programmable 1-100 seconds.
Automatic priority control, interleaved , exclusive or
none. Programmable.
Automatic alarm multiscreens, programmable
Alarm latching
Alarm recording
Alarm displays
Video motion and activity
detection
256, 16 x 16 grid
Sensitivity settings
10 levels
Gray levels per zone
256 levels
False-alarm-rejection
processing
3 levels
Size discrimination
256 levels
Recording priority
2x, 4x, interleaved or none
Status output
Link to relays, alarms
Remote control and
programming
DB-9, female. 3-wire, N-8-1, baud rate selectable in
menus. Allows remote programming of menus,
upload of status data, remote control of front panel
buttons.
RJ45, remote keyboard input, looping, up to 1000 m
without adapters. System time I/O.
RS485
Miscellaneous
Input voltage
12 VDC, adapter 90 - 264 VAC to 12 VDC included.
Power
25 W nominal
Operating temperature
0 °C to +40 °C
Relative Humidity
90%, noncondensing
Dimensions
444 x 360 x 43 mm
Weight
4 kg
Ordering Information
CBR-16CDTX
E Video motion detection (intrusion) and activity
detection with active feedback setup scope
E Live in full-screen, sequencing, PIP, quad, 7, 9, 10, 13 or
16-up display
E Playback in full-screen, sequencing, PIP, quad, 9, 10 or
16-up display
Zones per camera
RS232
E Triplex simultaneous live and playback on one monitor
E PVP ultrafast monitor update speed
E VEXT automatic record speed synchronization
16-Camera colour triplex video multiplexer
E Covert camera feature removes selected camera(s)
from display without altering recording
E One-touch "freeze"
E Electronic PTZ
Multiplexers
Page : 90
CBR-16MDTX
16-camera mono triplex video multiplexer, PAL
The CBR-16MDTX offers today's best playback and live display, system
automation and alarm management. Cameras can be viewed in any of
several different multiscreen formats, while full-resolution pictures
from all cameras are sent to a recorder. Unique triplex performance
displays a custom mix of live and playback images simultaneously on
one monitor. Patented Parallel Video Processing (PVP) outputs up to 50
(CCIR) unique pictures to your monitor and recorder to deliver more
recorded documentation and closer-to-real-time display than
conventional multiplexers. VEXT automatically optimizes
multiplexer/recorder synchronization and prevents loss of critical
pictures regardless of record speed or how often record speeds
change.
Specifications
Video
Display memory
Grayscale
2048 x 2048 memory array, 32 Mb live/play plus 32
Mb Record = 64 Mb total display memory
256 levels
Horizontal resolution
720 pixels
Vertical resolution
576 active lines CCIR
Sampling rate
17.7 MHz
Alarm handling
Alarm inputs
16 NO or NC setup in menus
Alarm outputs
2 form C relays, each NO and NC. Rated 0.5 A
continuous, 1.0 A momentary
3 settings: latched; transparent; timed-out.
Programmable 1-100 seconds
Automatic priority control, interleaved, exclusive or
none. Programmable
Automatic alarm multiscreens, programmable
Alarm latching
Alarm recording
Alarm displays
Video motion and activity
detection
256, 16 x 16 grid
Sensitivity settings
10 levels
Gray levels per zone
256 levels
False-alarm-rejection
processing
3 levels
Size discrimination
256 levels
Recording priority
2x, 4x, interleaved or none
Status output
Link to relays, alarms
Remote control and
programming
DB9, female. 3-wire, N-8-1, baud rate selectable in
menus. Allows remote programming of menus,
upload of status data, remote control of front panel
buttons.
RJ45, remote keyboard input, looping, up to 1000 m
without adapters. System time I/O
RS485
Miscellaneous
Input voltage:
12 VDC, adapter 90 - 264 VAC to 12 VDC included
Power
25 W nominal
Temperature
0 °C to +40 °C
Relative humidity
90%, noncondensing
Dimensions
444 x 360 x 43 mm
Weight
4 kg
Ordering Information
CBR-16MDTX
E Video motion detection (intrusion) and activity
detection with active feedback setup scope
E Live in full-screen, sequencing, PIP, quad, 7, 9, 10, 13 or
16-up display
E Covert camera feature removes selected camera(s)
from display without altering recording
Zones per camera
RS232
E Triplex simultaneous live and playback on one monitor
E PVP ultrafast monitor update speed
E VEXT automatic record speed synchronization
16-camera mono triplex video multiplexer, PAL
E
E
E
E
One-touch "freeze"
Electronic PTZ
16 alarm inputs, 2 relay outputs
16 macros
DIGITAL RECORDERS
The GE Security range of digital recorders goes from a single channel recorder with 80 Gb
hard disk capacity to a 16 channel triplex recorder with 1 Tb hard disk capacity
Digital recorder
Page : 93
1 Ch Digital video recorder, Compact Flash, without hard disk drive
VDR-0-CF
The Video Digital Recorder (VDR) combines digital recording capabilities
with convenient VCR functionality to deliver a system that operates like
a VCR but is more reliable, faster, and provides new image viewing and
transfer options. The new VDR is our most economical digital recorder
ever. It offers the advantages of digital recording (like clearer images
and quick searches) at the price of a standard security timelapse VCR.
Like our other digital recorders, it is easy to use because it features
familiar VCR type controls and eliminates the problems associated with
handling large quantities of traditional VHS tapes. The VDR features a
removable HDD tray for convenient data archiving and protection. The
multiplexer compatible VDR slots easily into any existing VCR
application. With all the funtionality of digital at a VCR price, the VDR
offers you the easiest and most economical way to upgrade your
surveillance recording. The VDR comes with a Compact Flash port and
QuickWave function as standard, to allow archive and retrieval of
images onto a standard PC
Specifications
Colours:
YUV 4:2:2, 16.8 million colours
Greyscale:
256 levels
Horizontal Resolution:
720 pixels
Vertical Resolution:
484 lines NTSC/EIA; 576 lines PAL/CCIR
I/O Port - DB-9 Connector
Compression standard
Alarm input and output, Record Start in, Alarm Record
reset, VEXT Pulse out, Error out, Ground, Video Loss
out, Disk End (5 min) out
Wavelet
Hard drive:
No HDD supplied, will accept HDD up to 160GB
Record speeds:
50, 25, 17, 10, 5, 3, 2, 1, 0.5, 0.2, 0.1 pps; 0.0 event
Inputs/Outputs
Input voltage:
One each composite input and output, BNC
connectors NTSC/EIA or PAL/CCIR compatible
12 VDC, adapter 90 - 264 VAC to 12VDC included
E
E
E
E
E
E
E
E
Power:
20 W nominal
E Works in quad, multiplexer, switcher, matrix, or
Temperature:
0°C to +40 ºC
Relative humidity:
90%, noncondensing
Dimensions:
330 x 267 x 63.5 mm
Weight:
4.2 kg
Ordering Information
VDR-0-CF
VDR-80-CF
1 Ch Digital video recorder, Compact Flash, without hard disk
drive
1 Ch digital video recorder, Compact Flash, with 80 Gb hard
disk drive
VCR functionality with digital recording capabilities
Compact Flash card reader port
Easy-to-use control panel with common VCR functions
Instant retrieval of stored video
Records and plays back multiplexed video
Variable recording speeds up to 50 pictures per second
Programmed with common time-lapse speeds
Alarm-activated recording
single-camera applications
E Typical VCR connections I/O, VEXT, Composite video
Digital recorder
Page : 94
1 Ch digital video recorder, Compact Flash, with 80 Gb hard disk drive
VDR-80-CF
The Video Digital Recorder (VDR) combines digital recording capabilities
with convenient VCR functionality to deliver a system that operates like
a VCR but is more reliable, faster, and provides new image viewing and
transfer options. The new VDR is our most economical digital recorder
ever. It offers the advantages of digital recording (like clearer images
and quick searches) at the price of a standard security timelapse VCR.
Like our other digital recorders, it is easy to use because it features
familiar VCR type controls and eliminates the problems associated with
handling large quantities of traditional VHS tapes. The VDR features a
removable HDD tray for convenient data archiving and protection. The
multiplexer compatible VDR slots easily into any existing VCR
application. With all the funtionality of digital at a VCR price, the VDR
offers you the easiest and most economical way to upgrade your
surveillance recording. The VDR comes with a Compact Flash port and
QuickWave function as standard, to allow archive and retrieval of
images onto a standard PC
Specifications
Colours:
YUV 4:2:2, 16.8 million colours
Greyscale:
256 levels
Horizontal resolution:
720 pixels
Vertical resolution:
484 lines NTSC/EIA; 576 lines PAL/CCIR
I/O Port - DB-9 connector
Compression standard
Alarm input and output, Record Start in, Alarm Record
reset, VEXT Pulse out, Error out, Ground, Video Loss
out, Disk End (5 min) out
Wavelet
Hard drive:
80 Gb
Record speeds:
50, 25, 17, 10, 5, 3, 2, 1, 0.5, 0.2, 0.1 pps; 0.0 event
Inputs/outputs
Input voltage:
One each composite input and output, BNC
connectors NTSC/EIA or PAL/CCIR compatible
12 VDC, adapter 90 - 264 VAC to 12 VDC included
E
E
E
E
E
E
E
E
Power:
20 W nominal
E Works in quad, multiplexer, switcher, matrix, or
Temperature:
0°C to +40 °C
Relative humidity:
90%, noncondensing
Dimensions:
330 x 267 x 63.5 mm
Weight:
4.2 kg
Ordering Information
VDR-80-CF
VDR-0-CF
1 Ch digital video recorder, Compact Flash, with 80 Gb hard
disk drive
1 Ch Digital video recorder, Compact Flash, without hard disk
drive
VCR functionality with digital recording capabilities
Compact Flash card reader port
Easy-to-use control panel with common VCR functions
Instant retrieval of stored video
Records and plays back multiplexed video
Variable recording speeds up to 50 pictures per second
Programmed with common time-lapse speeds
Alarm-activated recording
single-camera applications
E Typical VCR connections I/O, VEXT, Composite video
Digital recorder
Page : 95
Empty hard disk drive caddy for use with VDR
Ordering Information
VDR-HDD-0
Empty hard disk drive caddy for use with VDR
VDR-HDD-0
Digital recorder
Page : 96
DSR-2000E
Single channel digital recorder, NTCS/PAL, Ethernet
Inputs/outputs
If you can use a VCR, you can use the DSR-2000e, the first true VCR
replacement. This single-channel digital recorder looks, feels and
operates just like a time-lapse VCR, but with more reliability, faster
access to images and the capability to remotely view, download and
share images.
One each composite input and output, BNC
connectors
One each S-VHS input and output, DIN connectors
NTSC/EIA or PAL/CCIR compatible
Miscellaneous
The DSR-2000e control panel features the same simple functions as a
VCR, plus a convenient jog shuttle dial for scanning through images
rapidly or frame-by-frame. Recordings are saved to the hard drive(s)
and the DSR-2000e is currently availlable up to a maximum capacity
of 1.000GB HDD.
The DSR-2000e also features superb image resolution: 720 x 576 in
PAL. It also records live images at speeds up to 50 pictures per
second.It records at speeds equivalent to a VCR's time-lapse settings,
so it is easy to replace a VCR in an existing system. The option to
record and play back audio at any speed over 1 pps is also available.
And the DSR works with the multiplexer you already own.
Input voltage
12 VDC, adapter 90 - 264 VAC to 12 VDC included
Power
35 W nominal
Operating temperature
0 °C to +40 °C
Relative humidity
90%, noncondensing
Dimensions (W x H x D)
330 x 343 x 89 mm, 2 U rack height
Weight
With one hard drive: 2.3 kg; With two hard drives: 2.9
kg
CE
Regulatory approval
Ordering Information
DSR-2000E
Single channel digital recorder, NTCS/PAL, Ethernet
The DSR-2000e comes with WaveReader software and an ethernet
port, which can be used to connect to a network. Authorized users can
then view live or recorded images and download or email recorded
images. Because they are digital, images from multiplexers are easily
decoded through the network. Using an SCSI connection, users can
even archive images onto CDs, DATs or AITs.
Specifications
Video
Colour
YUV 4:2:2, 16.8 million colours
Grayscale
256 levels
Horizontal resolution
720 pixels
Vertical resolution
484 lines NTSC/EIA; 576 lines PAL/CCIR
Audio (models with Audio only)
Record standard
Single channel, G.711 (64 kilobits/sec)
Connectors
RCA phone jacks, one input and one output
Audio in
315 mV, 40,000 ohm, unbalanced
Audio out
315 mV, 600 ohm, unbalanced
Archive
DAT or AIT or CD-recorder
One SCSI, DB 50-S-SCSI (reversed). Contact factory for
recommended models.
Network
I/O port - DB-9 connector
Alarm input and output, record start in, alarm record
reset, VEXT pulse out, error out, ground, video loss out,
disk end (5 min) out
Storage capacity / record time
Record speeds
Call your local GE sales rep for more info about
current HDD sizes
50, 25, 17,10, 5, 3,2,1,0.5 , 0.3, 0.1 pps; event.
Remote control and
programming
RS232
VCR functionality with digital recording capabilities
Easy-to-use control panel with common VCR functions
Jog shuttle dial for frame-by-frame viewing
No tapes to manage, clean or replace
Instant retrieval of stored video
E Ethernet TCP/IP connectivity for remote viewing and
archiving
One RJ45 connector for 10/100 Mbit Ethernet
Hard drive
E
E
E
E
E
One DB-9, male, 3-wire, N-8-1, baud rate selectable in
menus; allows remote programming of menus, upload
of status data and software upgrades, remote control
of front panel buttons
E Records and plays back multiplexed video
E Unlimited video viewing without image degradation
E Alarm-activated recording
E Works in quad, multiplexer, switcher, matrix or
single-camera applications
E Archive onto CDs, DATs or AITs
Digital recorder
Page : 97
StoreSafe
StoreSafe
Compression
StoreSafe is an easy-to-use, stand-alone, full-featured multiplexer and
digital recorder that can capture and print evidence. StoreSafe is
available in 4, 10 and 16 camera units with built-in 40, 80, 160, 320 Gb
hard drive storing high-resolution colour or B/W images for days,
weeks or months. StoreSafe also offers a 600 Gb hard drive with 10
and 16 channel units.
Two powerful tools for retail managers and law enforcement agencies
are featured in this product: support for on-site printing of images and
a built-in CD-R for rapid transfer of important video both at the touch
of a button.
Wavelet format; standard-, medium- and high-quality
settings selectable per camera
Time lapse, event and time lapse + event
Record mode
Printing
Ethernet port
Requires compatible printer connected via print server
Miscellaneous
Input voltage
12 VDC, adapter 90 - 264 VAC to 12 VDC included
Power
35 W nominal
Operating temperature
0°C to +40°C
Relative humidity
90 %, noncondensing
Weight
9.53 kg
Dimensions (W x H x D)
330 x 89 x 343 mm
Ordering Information
Any range of recorded video can be easily copied to a blank
recordable CD. The copied video can be played back without installing
any software on the playback PC.
StoreSafe
StoreSafe
Operating StoreSafe is simple. Its front panel controls simulate
multiplexer and VCR controls. Easy-to-use on-screen menus facilitate
fast and effortless setup.
Specifications
Inputs
Camera
Conditioning
4, 10 or 16 looping BNC connectors, NTSC/EIA or
PAL/CCIR compatible; auto-terminating
AGC, 0.5 to 2.0 V pk-pk video accepted
Termination
Automatic, 75 Ohms or Hi-Z if looped
RS232 port 1
DB9 male connector, for POTS, remote control and
front panel emulation
Video outputs
Monitor A composite
One monitor A multiscreen output, BNC connector
Monitor B composite
One monitor B full-screen switched output, BNC
connector
Archive
Archive device type
Internal CD-R drive
Network
Type
10/100 Ethernet (auto-sensing); one RJ45 connector
Video
Display memory
Colour
2048 x 1024 memory array per monitor; 32 Mb total
display memory
YUV 4:2:2, 16.8 million colours
Grayscale
256 levels
Horizontal resolution
720 pixels
Vertical resolution
576 active lines
Alarm handling
Alarm inputs
4, 10 or 16 fixed or N/O
Relay outputs
2 N/O
Video motion and activity
detection
Zones per camera
256, 16 x 16 grid
Sensitivity settings
10 levels
Status output
Link to relay
Recording
Hard drive
Record speed
Call your local GE Security sales rep for more info
about current HDD sizes
Selectable; 25 pps to 0.125 pps; event, time-lapse or
both
E Built-in CD-R with one-button video copy
E Triplex multiplexer operation
E Ethernet LAN/WAN capability, TCP/IP protocol
E Set separate recording rates, mode and image quality
for each camera
E Email notification upon alarm, video loss, record status
and more
E View live or recorded images remotely using
WaveReader software
Digital recorder
Page : 98
StoreSafe Pro
StoreSafe Pro
StoreSafe Pro is an easy-to-use, stand-alone, full-featured multiplexer
and digital recorder that can capture and print evidence. StoreSafe Pro
is available in 4, 10 and 16 camera units with built-in 40, 80,160,320 Gb
hard drive storing high-resolution colour or B/W images for days,
weeks or months. StoreSafe also offers a 600 Gb hard drive with 10
and 16 channel units. Storesafe pro can record pictures at speeds up
to 50 pictures per second, with simultaneous audio recording.
The built-in text insertion associates receipt text with the
corresponding video using the optionnal Probridge PB3-POS (Point Of
Sales). This powerfull function will allow to retreive transactions and
associated video via the advanced search function built into the
StoreSafe Pro. Two powerfull tools for retail managers and law
enforcement agencies are featured in this product: support for on site
printing of images and a built-in CD-R for rapid transfer of important
video, both at the touch of a button. Any range of recorded video can
be easily copied to a blank recordable CD. The copied video can be
played back without installing any software on the playback PC.
Sensitivity settings:
10 levels
Status output:
Link to relay
Recording
Hard drive:
Call your local GE Security sales rep for more info
about current HDD sizes
Selectable; 50 pps to 0.125 pps; event, time lapse, or
both
Wavelet format; standard, medium, and high quality
settings selectable per camera
Time Lapse, Event, and Time Lapse + Event
Record speed:
Compression:
Record mode:
Printing
Ethernet port:
Requires compatible printer connected via print server
Miscellaneous
Input voltage:
12 VDC, adapter 90 - 264 V to 12 VDC included
Power:
35 W nominal
Operating temperature:
0°C to 40°C
Relative humidity:
90 percent, noncondensing
Weight:
9.525 kg
Dimensions:
330 mm x 89 mm x 343 mm
Ordering Information
Operating StoreSafe Pro is simple. Its front panel controls simulate
multiplexer and VCR controls. Easy-to-use on-screen menus facilitate
fast and effortless setup.
StoreSafe Pro
StoreSafe Pro
Specifications
Inputs
Camera:
Conditioning:
4, 10, or 16 looping BNC connectors, NTSC/EIA or
PAL/CCIR compatible; auto-terminating
AGC, 0.5 to 2.0 V pk-pk video accepted
Termination:
Automatic, 75 ohm or Hi-Z if looped
RS232 Port 1
DB9 male connector for POTS, remote control and
front panel simulation
RJ45 connector for ASCII text insertion and event
generation
RJ45 for Keypad connexion and Cyberdome control
RS232 Port 2
RS485
Video Outputs
Monitor A composite:
One monitor A multiscreen output, BNC connector
Monitor B composite:
One monitor B full-screen switched output, BNC
connector
Archive
Archive device type:
Internal CD-R drive
Network
Type:
10/100 Ethernet (auto-sensing); one RJ45 connector
Video
Display memory:
Colours:
2048 x 1024 memory array per monitor; 32 Mb total
display memory
YUV 4:2:2, 16.8 million colours
Grayscale:
256 levels
Horizontal resolution:
720 pixels
Vertical resolution:
576 active lines PAL/CCIR
Alarm Handling
Alarm inputs:
4, 10, or 16 fixed or N/O
Alarm outputs:
Two form-C relays, fixed N/O; rated 0.5 A
Alarm recording:
Programmable priority control: interleaved or
exclusive
for each camera
E POS interface associates receipt text with
corresponding video using ProBridge 3
E Alarm inputs; pre and post alarm recording
E E-mail notification upon alarm, video loss, record
status and more
E View live or recorded images remotely using
WaveReader software
Video Motion and Activity
Detection
Zones per camera:
E Built-in CD-R with one-button video copy
E Triplex multiplexer operation
E Ethernet LAN/WAN capability, TCP/IP protocol
E Set separate recording rates, mode, and image quality
256, 16 x 16 grid
E Single channel audio recording
Digital recorder
Page : 99
DVMRE-CT
DVMRE-CT
Recording
DVMRe Triplex is the top of the line digital multiplexer/recorder
designed to exceed your expectations of a surveillance recording
system. The popular Triplex functionality has been taken one step
further with new features that put the DVMRe Triplex in a class of its
own.
Without disturbing recording, live and recorded images can be viewed
simultaneously on separate monitors or combined onto one monitor.
By utilizing Parallel Video Processing (PVP), DVMRe Triplex can record
up to 50 pictures per second (pps).
The DVMRe Triplex offers advanced search and alarm features.
Hard drive
Contact your local GE Security sales rep for more info
about current HDD sizes
Selectable; 50 pps to 0.125 pps; event, time lapse or
both
Wavelet format; standard-, medium- and high-quality
settings selectable per camera
Record speed
Compression
Miscellaneous
Input voltage
12 VDC, adapter 90 - 264 VAC to 12 VDC included
Power
35 W nominal
Operating temperature
0°C to +40°C
Relative humidity
90 %, noncondensing
Dimensions
444.47 x 343.00 x 4.45 mm
Ordering Information
The DVMRe Triplex can interface with electronic cash registers and
ATMs to detect fraud and inventory shrinkage. The ProBridge interface
captures and references transaction text data associated with
recorded video. You can search by transaction number or any other
receipt text to instantly retrieve video associated with the reference.
When the event is found, the scene can be selected to automatically
begin playback.
DVMRE-CT
DVMRE-CT
Specifications
Inputs
Camera
Conditioning
4, 10 or 16 looping BNC connectors, NTSC/EIA or
PAL/CCIR compatible; auto-terminating
AGC, 0.5 to 2.0 V pk-pk video accepted
Termination
Automatic, 75 ohms or Hi-Z if looped
RS232 Port 1
DB9 male connector. For POTS, remote control and
front panel emulation
RJ45 connector for ASCII text insertion and event
generation
RS232 Port 2
Outputs
Monitor A composite
One monitor A multiscreen output, BNC connector
Monitor A Y/C
One S-VHS monitor output, 4 pin mini DIN connector
Monitor B composite
One monitor B multiscreen output, BNC connector
Monitor B Y/C
One S-VHS monitor output, 4 pin mini DIN connector
Archive device type
Calibur DVSe, DAT, AIT, RAID, CD-R
SCSI 2
One 50-pin SCSI-2 port
IEEE 1394 Port
Standard IEEE 1394 connector
Network
Type
recorded images on one monitor while continuing to
record
E DHCP-enabled feature minimizes the communication
problems associated with dynamic IP addresses
E Jog/shuttle control provides variable-speed forward,
10/100 Ethernet (auto-sensing); one RJ45 connector
Video
Display memory
E Triplex capability enables users to watch live and
reverse play and frame-by-frame scrutiny of a paused
recording
E Graphical disk analysis screen display for improved
Colours
2048 x 1024 memory array per monitor; 32 Mb total
displaymemory
YUV 4:2:2, 16.8 million colours
Grayscale
256 levels
E Dual multiscreen monitor displays for live viewing and
Horizontal resolution
720 pixels
Vertical resolution
576 active lines
Alarm handling
recorded data analysis
playback
E Ethernet LAN/WAN capability, TCP/IP protocol
E View live or recorded images remotely using
Alarm inputs
4, 10 or 16 programmable NO or NC in menus
Alarm outputs
Two form-C relays, each NO and NC; rated 0.5 A
continuous, 1.0 A momentary
E PTZ over Ethernet capability provides remote PC
Zones per camera
256, 16 x 16 grid
E ATM interface associates ATM receipt text with
Sensitivity settings
10 levels
Status output
Link to relay
Video motion and activity
detection
WaveReader software
control of PTZ units
corresponding video, enabling searches by ATM
transaction number or any other text on a customer's
receipt
Digital recorder
Page : 100
16-Camera Triplex 16x5 DVMR Matrix, 1000 Gb, NTSC/PAL, Ethernet, Audio
DVMRE-16CTM-1TA
Specifications
Inputs
Camera
Conditioning
16 looping BNC connectors, NTSC/EIA or PAL/CCIR
compatible; auto-terminating
AGC, 0.5 to 2.0 V pk-pk video accepted
Termination
Automatic, 75 ohm or Hi-Z if looped
RS232 Port 1
DB9 male connecto; For POTS, remote control and
front panel emulation
RJ45 connector for ASCII text insertion and event
generation
RS232 Port 2
Video outputs
Monitor A Y/C
Monitor A composite
Monitor B Y/C
Monitor B composite
One monitor A multiscreen output. S-VHS,
4-pin mini-DIN connector
One monitor A multiscreen output, BNC connector
One monitor B multiscreen output; S-VHS, 4-pin miniDIN connector
One monitor B multiscreen output, BNC connector
Archive
Archive device type
IEEE 1394 Port
DVSe, DAT, AIT, RAID, CD-Writer (call GE Security for
recommended models)
Standard IEEE 1394 connector
Network
Type
10/100 Ethernet (auto-sensing); one RJ45
connector
E Crosspoint matrix switcher enables any of up to 16
Video
Display memory
cameras to be switched to any of five monitors
Colours
2048 x 1024 memory array per monitor; 32 Mb total
display memory
YUV 4:2:2, 16.8 million colours
Grayscale
256 levels
Horizontal resolution
720 pixels
vertical resolution
576 active lines
E Retrieves the date and time from the Network Time
Alarm inputs
16 programmable NO or NC in menus
E Search video clips using motion search to detect
Alarm outputs
Two form-C relays, each NO and NC; rated 0.5 A
continuous, 1.0 A momentary
Alarm handling
Video motion and activity
detection
256, 16 x 16 grid
Sensitivity settings
10 levels
Status output
Link to relay
Recording
Record speed
Compression
recorded images on one monitor while continuing to
record
Protocol server via UDP packet exchange
motion in a user-defined area
E Graphical disk analysis screen display for improved
recorded data analysis
Zones per camera
Hard drive
E Triplex capability enables users to watch live and
Contact your local GE Security sales rep for for more
info about current hard drive sizes.
Selectable; 50 pps (PAL) to 0.125 pps; event, time lapse
or both
Wavelet format; standard-, medium- and high-quality
settings global selectable
Miscellaneous
Input voltage
12 VDC, adapter 90 - 264 VAC to 12 VDC included
Power
35 W nominal
Operating temperature
0°C to + 40°C
Relative humidity
90 %, noncondensing
Dimensions
444 x 343 x 63 mm
Weight
4 kg
Ordering Information
DVMRE-16CTM-1TA 16-Camera Triplex 16x5 DVMR Matrix, 1000 Gb, NTSC/PAL,
Ethernet, Audio
E Print to a printer or copy to a CD recorder without the
need of a PC
E Jog/shuttle control provides variable-speed forward,
reverse play and frame-by-frame scrutiny of a paused
recording
E Remote access to live and recorded images via
ethernet LAN/WAN capability, TCP/IP protocol
Digital recorder
Page : 101
DVMRe Pro
DVMRe Pro
DVMRe Pro takes the DVMRe line one step further by adding
one-button printing capability and an internal CD or DVD writer with
one-button recording to the top of the line DVMRe Triplex product. In
addition, DVMRe Pro includes a Turbo Recording mode for capturing
images at 100 pictures per second (pps).
Specifications
Inputs:
Camera:
Conditioning:
4, 10, or 16 looping BNC connectors, NTSC/EIA or
PAL/CCIR compatible; auto terminating
AGC, 0.5 to 2.0 V pk-pk video accepted
Termination:
Automatic, 75 ohm or Hi-Z if looped
RS232 Port 1:
DB9 male connector. For POTS, remote control and
front panel emulation
RJ45 connector for ASCII text insertion and event
generation
RS232 Port 2:
Video Outputs
Monitor A composite:
One monitor A multiscreen output, BNC connector,
Monitor B composite:
One monitor B multiscreen output, BNC connector
Archive
Archive device type:
Internal CD-RW or DVD+RW drive (depending on
model)
Network
Type:
10/100 Ethernet (auto-sensing); one RJ45 connector
Video
Colours:
YUV 4:2:2, 16.8 million colours
Grayscale:
256 levels
Horizonal resolution:
720 pixels
Vertical resolution:
576 active lines
Recording
Hard drive:
2-HDD. Contact your local GE Security sales rep for
more info about current hard drive sizes
Selectable; 100 pps to 0.125 pps; event, time lapse, or
both
Wavelet format
Record speed:
Compression:
Alarm Handling
one-button video copy
E 100 pps turbo recording mode
E Prints images directly to an on-site printer
E Triplex capability displays multiscreen live and
playback during recording
E Advanced searching by alarm, time, date, camera
number, and text from ATM machines or cash registers
E Ethernet connection for remote operation and viewing
E DHCP dynamic network IP addressing
E Programmable record rates, image quality, and modes
Alarm inputs:
4, 10, or 16 programmable NO or NC in menus
Alarm outputs:
Two form-C relays, each NO and NC; rated 0.5 A
continuous, 1.0 A momentary
Three settings: Latched, Transparent, Timed-Out;
programmable 1 to 100 sec
Programmable priority control: interleaved, exclusive,
or none
Automatic alarm multiscreens; programmable
Alarm latching:
Alarm recording:
Alarm displays:
Video Motion and Activity
Detection
256, 16 x 16 grid
Sensitivity settings:
10 levels
Status output:
Link to relay
Miscellaneous
Input voltage:
12 VDC, adapter 90 - 240 VAC to 12 VDC included
Power:
35 W nominal
Operating temperature:
0°C to +40°C
Relative humidity:
90 percent, noncondensing
Dimensions:
330 mm x 89 mm x 343 mm
Ordering Information
DVMRe Pro
by individual camera
E Search video clips using motion search to find motion
in user-defined area
E Time and date sync from Network Time protocol server
E Jog/shuttle control for variable speed forward and
reverse play, and frame-by-frame display
E WaveReader software included with every unit
Zones per camera:
DVMRe Pro
E Advanced, full-featured DVMRe software
E Built-in DVD or CD writer (depending on model) with
Digital recorder
Page : 102
DVSE digital video storage chassis only 110/220 V, SCSI Cable Included
DVSE
DVSe is a digital video storage system that provides extended storage
capacity to the DVMRe (Digital Video Multiplexer/Recorder) or DSR.
Designed exclusively for the CCTV security industry, this inexpensive
desktop or rack-mountable disk array offers flexible solutions for
extended storage and easy retrieval of digitized, compressed video
data.
Specifications
Electrical
Input voltage
110 - 120 VAC (60 Hz)/ 200 - 240 VAC (50 Hz)
Network
One RJ45 connection for 10/100 Mbit Ethernet
Mechanical
Weight
12.7 kg
Construction
Steel, rack-mountable, 3 U
Finish
Dark gray
Storage
Hard drive
Contact GE Security for storage capacity
Back panel elements
Cooling fan
Power connector
Voltage selector 110/220 VAC
On/off switch
Dip switches
SCSI port 1 and 2: 50-pin, high-density, SCSI 2
RS232 port: DB-9 connector, male, null modem cable
required Relay connection
Firewire port 1 and 2 :Standard IEEE 1394 connector
Hard drive status indicators
Light on: Drive present and operating
Light flashing: Drive present, error detected
Light off: No drive present or drive damaged
Hard drive activity indicator:Light on when the drive is
being accessed (read or written to)
When power up is complete, the LCD displays the
total disk storage capacity of the unit.
Ethernet indicators
Link: A detected ethernet connection
RD: Receiving data
WR: Transmitting data
10 : 100 Mbps bandwidth
Ordering Information
DVSE
DVSE-2
DVSE-4
DVSE-6
DVSE-8
DVSE-8-1280
DVSE-8-2T
recording units
E Self-configures every time HDDs are installed
E Standard SCSI port for connecting to DSR-2000 and
DVMRE recorders
E LCD and LED indicator lights
E 19 inch, 3 U high rack-mountable chassis
Front panel indicators
LCD display:
E FireWire, an ultra high-speed serial data connection
E Holds up to eight hard disk drives
E Compatible with the DVMRe and DSR family of digital
DVSE digital video storage chassis only 110/220 V, SCSI
Cable Included
DVSE-2 Digital Video Storage, 160 Gb, 110/220 V, SCSI Cable
Included
DVSE-4 Digital Video Storage, 320 Gb, 110/220 V, SCSI Cable
Incl.
DVSE-6 Digital Video Storage, 480 Gb, 110/220 V, SCSI Cable
Included
DVSE-8 Digital Video Storage, 640 Gb, 110/220 V, SCSI Cable
Included
DVSE-8 Digital Video Storage, 1280 Gb, 110/220 V, SCSI cable
included
DVSE-8 Digital Video Storage, 2000 Gb, 110/220 V, SCSI cable
included
Interfaces
Page : 103
CBR-PB3-ATM
Probridge 3, ATM
Input
The ProBridge 3 (PB3) is a text translation device that captures an
ATM's transaction data and translates it to a format that can be
interpreted by GE Security's digital video multiplexer recorders
(DVMRe's).
The data, which is synchronized with video recorded by the DVMRe,
can be played back locally at the DVMRe or remotely using
WaveReader software. Specific events or transactions are easily
retrieved: using the DVMRe or WaveReader software, operators can
search data by any combination of time, date, camera, transaction
number or transaction text.
Voltage
110 or 240 VAC ± 10%
Power
20 W
Output
Rating
12 VDC
Current
1A
DC power connector
DC jack, positive center pin
PB3 current
110 mA
Ordering Information
CBR-PB3-ATM
Probridge 3, ATM
A PB3 can accommodate up to 16 ATMs in a multi-drop ATM network.
In a single-drop ATM network, multiple PB3s can be connected through
a built-in RS485 network.
The AutoDetect feature simplifies installation by automatically
identifying the ATM network's communication protocol and the
connected ATM's address. Associating an ATM's transaction data with a
camera is DIP switch programmable. Built-in diagnostics confirm
proper cable connectivity. A test mode, which simulates transaction
messages to the DVMRe, enables users to confirm the PB3 is operating
properly without linking to an ATM.
Connecting the PB3 to a PC loaded with Windows HyperTerminal
extends its programming capabilities. Users can enter multiple
addresses in a multi-drop ATM network site and assign multiple
cameras to a single ATM.
All data is stored in nonvolatile memory, so settings are retained even
when power is removed from the unit.
E Captures transaction text and associates it with
recorded video
The PB3 is powerful enough to address single-drop and multi-drop ATM
networks. In single-drop networks, each ATM has its own network
communication line. In multi-drop networks, multiple ATMs share the
same communication line at a single site.
E Search data by time, date, camera, transaction number
Specifications
E Supports multi-drop and single-drop ATM networks
E Address up to 16 ATMs in a multi-drop ATM network
Mechanical
Construction
Black anodized aluminum
Dimensions (H x W x L)
2.54 x 10.8 x 17.78 cm
Nominal weight
0.14 kg
Shipping weight
0.45 kg packaged, incl. power supply, cables and
manual
Cables included
1 Triport adapter:
1 PB3 to DVMRe-CT cable
incl. DB25M conector (to ATM modem) with DB9M
RS232 cable (to PB3)
RJ45 to RJ45
1 PB3 to DVMRe-CS/CD cable RJ45 to DB9F (or programming via Windows
HyperTerminal)
Environmental
Operating temperature
0°C to +40°C
Relative humidity
90 %, noncondensing
External AC power supply
(included)
or transaction text using the DVMRe or WaveReader
software
E Compatible with DVMRe-CT series of digital video
multiplexer recorders
E In a single-drop ATM network, connect multiple PB3s
through a built-in RS485 network
E AutoDetect senses ATM network modem protocols
E Built-in diagnostics confirm proper setup and operation
E Nonvolatile memory retains settings during power loss
Interfaces
Page : 104
CBR-PB3X-POS-RP
Probridge 3, ATM
The Probridge 3 (PB3) is a text translation device that captures a
point-of-sales (POS) transaction data and translates it to a format that
can be interpreted by GE Security's digital video multiplexer recorders
(DVMRE's).
The data which is synchronized with video recorded by the DVMRe can
be played back locally at the DVMRe or remotely using WaveReader
software. Specific events or transactions are easily retrieved: using the
DVMRe or WaveReader software, operators can search data by any
combination of time, date, camera, transaction number or transaction
text.
Specifications
Mechanical
Construction
Black anodize aluminum
Dimensions (H x W x L)
24 x 107.95 x 177.8 mm
Nominal weight
0.14 kg
Environmental
Operating temperature
0°C to +40°C
Relative humdity
90 %, noncondensing
E Eliminate need for costly third-party interface
equipment
External AC power supply
(included)
E Capture transaction text and associates it with
Input
recorded video
Voltage
110 or 240 VAC (+/- 10 %)
Power
20 W
E Search data by time, date, camera or transaction text
Rating
12 VDC
E Compatible with DVMRE-CT series and StoreSafe
Current
1A
DC power connector
DC jack, positive center pin
PB3 current
110mA
Output
Cables included
1 PB3 to DVMRE-CT cable
RJ45 to RB9F
1 PB3 to DVMRE-CS/CD cable RJ45 to DB9F (or programming via Windows
HyperTerminal)
1 PB3 to printer interconnect DB25M to DB25F
cable
1 PB3 interface cable to
receipt printer
DB25F to DB25F
Ordering Information
CBR-PB3X-POS-RP Probridge 3, ATM
using the DVMRE or WaveReader software
Advanced digital video multiplexer recorders
E In a single drop-POS network, connect multiple PB3s
through a built-in RS485 network
E Built-in diagnostics confirm proper setup and operation
E Nonvolatile memory retains settings during power loss
MATRIX SWITCHERS
The digiplex IV matrix system is available
from 64 camera inputs and 4 video monitor
outputs to a maximum of 512 camera inputs
and 64 monitor outputs.
The number of camera inputs can be
increased in steps of 64 cameras.
The number of monitor outputs can be
increased in steps of 4 monitors.
Any combination is possible up to the
maximum capacity of the matrix.
A number of interfaces and accessories
further increases its flexibility.
Digiplex
Page : 107
KTD-4M-64x4
Digiplex 4 matrix, 64 inputs x 4 outputs,expandable to 512 x 64
Digiplex IV is an expandable matrix switching system that manages
video inputs and monitor outputs. It is designed for use in large CCTV
systems. At the core of the system is the KTD-440 master switcher
chassis, which can manage 64 video inputs by 32 monitor outputs.
With the addition of colour-coded expansion cards and an expansion
chassis, the KTD-440’s matrix switching capabilities can be
increased to 512 inputs by 64 outputs. Digiplex IV also offers an
optional video loss detection card, which monitor video signals and
alert users in the event of camera failure.
Ordering Information
KTD-4M-64x4
Digiplex 4 matrix, 64 inputs x 4 outputs,expandable to 512 x
64
E Base system: 64 video inputs by 4 monitor outputs,
expands to 512 inputs by 64 outputs
E
E
E
E
E
E
Easy to install expansion chassis
Optional internal video loss detection
Built in dagnostics LEDs
Tranparent cross mapped inputs
Video ribbon cable interconnect
Easy sequential switching
Digiplex
Page : 108
KTD-440
Master switcher chassis - accepts up to 64 inputs x 32 outputs
With the capacity to manage 64 video inputs by 32 monitor outputs,
the KTD-440 master switcher chassis is the primary building block of
the Digiplex IV system. When expansion cards and expansion chassis
are added, its matrix switching capability can be expanded to 512
inputs by 64 outputs.
The KTD-440 accepts up to two video input cards, eight video output
cards and one CPU card. It provides transparant cross-mapped inputs,
sequential switching and an option for internal video loss detection.
LED status indicator lights make it easy to monitor system diagnostics.
The KTD-440 occupies 3 units (5.25 inch) of rack space in a standard 19
inch rack. Each chassis is supplied with one KTD-446 power supply.
Specifications
Input
Voltage
100 - 240 VAC @ 50/ 60 Hz
Power
25 W
Data signal
RS422
Computer interface
RS232
Output
Remote data signal
RS422
Video loss alarm
Dry contact
Connections
Video loss alarm, RS422
Removable terminal strip
Computer interface
RJ45
PC keyboard
6-pin mini DIN
Power
Molex Mini-fit, Jr., 5557 dual-row, 2-pin
Video
BNC connectors
Video output bus
3M mini D-sub, 36-pin
Video expansion bus
3M mini D-sub, 68-pin
Environmental
Operating temperature
0°C to +70°C
Mechanical
Dimensions (H x W x D)
13.34 (3U) x 48.26 x 28.58 cm
Weight
6.5 kg
Material
Die-cast aluminium and steel
Finish
Custom gray paint
Ordering Information
KTD-440
Master switcher chassis - accepts up to 64 inputs x 32
outputs
E
E
E
E
E
E
E
E
E
E
E
E
Base system: 64 video inputs by 4 monitor outputs
Expands to 512 inputs by 64 outputs
Controls multiple remote stations
Easy-to-install expansion chassis
Internal video loss detection
Built-in diagnostic LEDs
Transparent cross-mapped inputs
Video ribbon cable interconnect
Easy sequential switch
PC keyboard programmable
Mounts into standard 19 inch racks
Compact and attractive design
Digiplex
Page : 109
Gathering panel - video signal manager
The KTD-440G gathering panel manages video signals going from the
slave chassis into the master switcher chassis via the expansion
chassis. It is designed for systems with more than 128 video inputs.
Specifications
Input
Voltage
100 - 240 VAC @ 50/60 Hz
Power
15 W
Connections
Power
Molex Mini-fit, Jr., 5557 dual-row, 2-pin
Video
(9) 3M mini D-sub, 36-pin
Mechanical
Dimensions (H x W x D)
4.45 (1 U) x 48.26 x 21 cm
Weight
1.4 kg
Material
Custom gray ABS
Environmental
Operating temperature
0°C to +70°C
Ordering Information
KTD-440G
Gathering panel - video signal manager
KTD-440G
Digiplex
Page : 110
Monitor Expansion Chassis - Expands System by 32 Monitor Output
The KTD-440N monitor expansion chassis provides the Digiplex IV
system with 32 additional monitor outputs. The KTD-440N can hold up
to two video input cards. The first switches inputs for monitors 33
through 48, the second switches inputs for monitors 49 to 64. The
KTD-440N can also accept up to eight video output cards and one CPU
card. Each monitor expansion chassis is supplied with one KTD-446
power supply.
Specifications
Input
Voltage
100 - 240 VAC @ 50/60 Hz
Power
25 W
Data signal
RS422
Computer interface
RS232
Output
Remote data signal
RS422
Connections
Computer interface
RJ45
PC keyboard
6-pin mini DIN
Power
Molex Mini-fit, Jr., 5557 dual-row, 2-pin
Video expansion bus
3M mini D-sub, 68-pin
Environmental
Operating temperature
0 °C to +70 °C
Mechanical
Dimensions (H x W x D)
13.34 (3 U) x 48.26 x 28.6 cm
Weight
6 kg
Material
Die-cast steel
Finish
Custom gray paint
Ordering Information
KTD-440N
Monitor Expansion Chassis - Expands System by 32 Monitor
Output
KTD-440N
Digiplex
Page : 111
Slave Chassis, Additional 64 Video Inputs per Chassis (previously KT)
The KTD-441-1 slave chassis provides the Digiplex IV system with 64
additional video inputs. Seven of these units expand the system to its
maximum capacity of 512 video inputs. A ribbon cable connects the
slave chassis to the master switcher chassis via the gathering panel. It
features LEDs for monitoring and system diagnosis. The KDT-441-1
slave chassis can hold up to two video input cards. The first switches
inputs for monitors 1 through 16, the second switches inputs for
monitors 17 through 32. Each slave chassis comes supplied with one
KTD-446 power supply.
Specifications
Input
Voltage
100 - 240 VAC @ 50/60 Hz
Power
5W
Connections
Power
Molex Mini- fit, Jr., 5557 dual-row, 2-pin
Video
BNC connectors
Video output bus
3M mini D-sub, 36-pin
Video expansion bus
3M mini D-sub, 68-pin
Environmental
Operating temperature
0°C to +70°C
Mechanical
Dimensions (H x W x D)
8.9 (2 U) x 48.26 x 28.6 cm
Weight
6 kg
Material
Die-cast steel
Finish
Custom gray paint
Ordering Information
KTD-441-1
Slave Chassis, Additional 64 Video Inputs per Chassis
(previously KT)
KTD-441-1
Digiplex
Page : 112
Expansion Chassis - Accepts Inputs from KTD-440 for Monitors 33-64
The KTD-442 expansion chassis accepts video inputs from up to four
slave chassis for output on monitors 33 to 64. These inputs are
transmitted to the gathering panel, which manages video signals going
into the master switcher chassis. The gathering panel can accomodate
two KTD-442 expansion chassis, each of which can accomodate four
slave chassis. Each expansion chassis comes equipped with one
KTD-446 power supply. For a detailed view of the expansion scheme,
see the system layout diagrams in the product specification insert.
Specifications
Input
Voltage
100 - 240 VAC @ 50/60 Hz
Power
18 W
Connections
Power
Molex Mini-fit, Jr., 5557 dual-row, 2-pin
Video output bus
(4) 3M mini D-sub, 36-pin
Video expansion bus
(4) 3M mini D-sub, 68-pin
Environmental
Operating temperature
0 °C to +70 °C
Mechanical
Dimensions (W x H x D)
13.34 (3 U) x 48.26 x 28.6 cm
Weight
5.9 kg
Material
Steel and die-cast aluminium
Finish
Custom gray paint
Ordering Information
KTD-442
Expansion Chassis - Accepts Inputs from KTD-440 for
Monitors 33-64
KTD-442
Digiplex
Page : 113
Video input card 64x16 video crosspoint switch
KTD-443
The green colour-coded KTD-443 video input card switches 64 video
inputs to 16 monitor outputs. It is used in the master switcher chassis,
monitor expansion chassis and slave chassis, each of which accepts
up to two video input cards. It is also used in the expansion chassis,
which can accept up to eight video input cards. Each card provides
excellent video performance, DIP switch addressing and built-in
diagnostic LEDs. The LEDs enable users to monitor power, processing,
video connections and the data of slave communication.
Ordering Information
KTD-443
Video input card 64x16 video crosspoint switch
Monitor output card, controls 4 monitor outputs
The blue colour-coded monitor output card generates alphanumeric
titles for four monitors. It also provides built-in diagnostic LEDs, which
indicate communications between the CPU card and the monitor. The
LEDs indicate the functional mode of each monitor as well as the
receipt of control data by the corresponding monitor.
The master chassis accepts up to eight KTD-444 monitor output cards,
making it possible to generate titles for 32 monitors. Each output
drives a 75 ohm load.
Ordering Information
KTD-444
Monitor output card, controls 4 monitor outputs
KTD-444
Digiplex
Page : 114
Video loss card
KTD-445
The red colour-coded video loss card monitors incoming video signals.
When a video-related malfunction occurs, it audibly alerts users and
generates an on-screen list of faults. On-screen menus enable users to
specify which video inputs are scanned for video loss. Video loss
detection levels are adjustable.
The KTD-445 uses one monitor output to provide video signal
detection. Diagnostic LEDs indicate when the card is powered and
processing, the data rate of slave communication, the data rate of
control communication and when a fault has been detected.
Ordering Information
KTD-445
Video loss card
Digiplex 4 Power Supply
The KTD-446 power supply provides a 5 VDC power output from a 100
VAC to 240 VAC input (50/60 Hz). One power supply is included with
each chassis unit.
Ordering Information
KTD-446
Digiplex 4 power supply
KTD-446
Digiplex
Page : 115
Master switcher control card, CPU card
The black-colour coded CPU card provides the master switcher chassis
with switching control for 32 monitor outputs. Nonvolatile RAM holds
user-programmable data. The KTD-447 also provides a keyboard port
and an RS232 port for uploading and downloading programming
information with the use of GE Security software. Built-in diagnostic
LEDs indicate when the card is powered and processing, the data rate
of RS232 serial communication, video sync detection and functionality
of Digiplex PS422 control communication.
Ordering Information
KTD-447
Master switcher control card, CPU card
KTD-447
Digiplex
Page : 116
KTD-348-164U
16 x 4 Matrix switcher
Starting as a 16 input by 4 output switcher, the KTD-348-164U can be
easily expanded to 32 inputs by 4 or 8 outputs. Standard features
include looping video inputs, programmable alarm inputs and an
RS232 port for operation from a computer. Control is via twisted pair
cable from as many as 64 keypad locations. The switcher uses
standard Digiplex protocol, allowing it to be programmed for camera
sequence tours, alphanumeric titling, individual or universal dwell
times, etc.
Microprocessor-based circuitry allows the KTD-348-164U to receive
commands from the KTD-405U (not supplied) controller keypad. A
separate serial data port is provided for relay follow communication.
All ICs are socketed for easy removal and replacement. A 220 VAC/12
VDC external power supply is included for chassis power. Rack mount
accessories are available for the KTD-348-164U allowing it to be
installed in a standard 19" (2 U) equipment rack.
Specifications
Input
Voltage
12 VDC
Power
15.5 W
Miscellaneous
Video inputs
16 looping
Video outputs
4
Bandwidth
32 MHz at -1.5 dB
Signal/noise
50 MHz at -3 dB
-60 dB (RMS rel. 1 V pk-pk
Gain
0 dB ± 1 dB
Impedance
75 ohm, input and outputs
Alarms
RS232, RS422 removable barrier strips
Video
BNC connectors
Mechanical
Weight
4.6 kg
Dimensions (W x H x D)
420 x 197 x 90 mm
Ordering Information
KTD-348-164U
16 x 4 Matrix switcher
E
E
E
E
E
E
E
E
E
E
16 inputs by 4 outputs
Looping video inputs
Expandable to 32 by 8
Programmable alarm inputs
Up to 64 control points
Digiplex protocol
Standard 90 mm vertical rack space
RS422 communications
12 VDC power supply
BNC connectors for video
Digiplex
Page : 117
KTD-348-324U
32x4 Matrix switcher
The 32 inputs by 4 outputs KTD-348-324U can be easily expanded to
32 inputs by 8 outputs. Standard features include looping video inputs,
programmable alarm inputs and an RS232 port for operation from a
computer. Control is via twisted pair cable from as many as 64 keypad
locations. The switcher uses standard Digiplex protocol, allowing it to
be programmed for camera sequence tours, alphanumeric titling,
individual or universal dwell times, etc.
Microprocessor-based circuitry allows the KTD-348-324U to receive
commands from the KTD-405U (not supplied) controller keypad. A
separate serial data port is provided for relay follow communication.
All ICs are socketed for easy removal and replacement. A 220 VAC/12
VDC external power supply is included for chassis power. Rack mount
accessories are available for the KTD-348-324U allowing it to be
installed in a standard 19" (2 U) equipment rack.
Specifications
Input
Voltage
12 VDC
Power
15.5 W
Miscellaneous
Video inputs
32 looping
Video outputs
4
Bandwidth
32 MHz at -1.5 dB
Signal/noise
50 MHz at -3 dB
-60 dB (RMS rel. 1 V pk-pk)
Gain
0 dB ± 1 dB
Impedance
75 ohm, input and outputs
Alarms
RS232, RS422 removable barrier strips
Video
BNC connectors
Mechanical
Weight
4.6 kg
Dimensions (W x H x D)
420 x 197 x 90 mm
Ordering Information
KTD-348-324U
32x4 Matrix switcher
E
E
E
E
E
E
E
E
E
E
32 inputs by 4 outputs
Looping video inputs
Expandable to 32 by 8
Programmable alarm inputs
Up to 64 control points
Digiplex protocol
Standard 2U vertical rack space
RS422 communicationsover twisted pair cable
12 VDC power supply provided
BNC connectors for video
Digiplex
Page : 118
KTD-348-328U
32x8 Matrix switcher
The KTD-348-328U is a 32 inputs by 8 outputs matrix switcher.
Standard features include looping video inputs, programmable alarm
inputs and an RS232 port for operation from a computer. Control is via
twisted pair cable from as many as 64 keypad locations. The switcher
uses standard Digiplex protocol, allowing it to be programmed for
camera sequence tours, alphanumeric titling, individual or universal
dwell times, etc.
Microprocessor-based circuitry allows the KTD-348-328U to receive
commands from the KTD-405U (not supplied) controller keypad. A
separate serial data port is provided for relay follow communication.
All ICs are socketed for easy removal and replacement. A 220 VAC/12
VDC external power supply is included for chassis power. Rack mount
accessories are available for the KTD-348-328U allowing it to be
installed in a standard 19" (2 U) equipment rack.
Specifications
Input
Voltage
12 VDC
Power
15.5 W
Miscellaneous
Video inputs
32 looping
Video outputs
8
Bandwidth
32 MHz at -1.5 dB
Signal/noise
50 MHz at -3 dB
-60 dB (RMS rel. 1 V pk-pk)
Gain
0 dB ± 1 dB
Impedance
75 ohm, input and outputs
Alarms
RS232, RS422 removable barrier strips
Video
BNC connectors
Mechanical
Weight
4.6 kg
Dimensions (W x H x D)
420 x 197 x 90 mm
Ordering Information
KTD-348-328U
32x8 Matrix switcher
E
E
E
E
E
E
E
E
E
32 inputs by 8 outputs
Looping video inputs
Programmable alarm inputs
Up to 64 control points
Digiplex protocol
Standard 2U vertical rack space
RS422 communications
12 VDC power supply
BNC connectors for video
Digiplex
Page : 119
KTD-350
Relay Follower Card, 64x1 Relay Output
The KTD-352 Relay Follow Chassis and the KTD-350 Relay Follow Card
make up the Relay Follower, which carries out functions associated
with the video site selection of a matrix switcher. These functions can
include automatically switching audio to the displayed site or
illuminating an LED (on a surveillance map) that corresponds with the
site.
The KTD-350 card plugs into the KTD-352 chassis, which contains a
micro-processor based, internal control card that provides power and
switch information to the KTD-350. This enables the KTD-350 Relay
Follow Card to switch in conjunction with a KTD-348 Matrix Switcher
output or a KTD-440/440N Matrix Switcher output.
The KTD-350 card features 64 relays, each of which provides a 2-pole
closure between its respective input and the KTD-350's common
output. When a matrix switcher selects a camera site, each relay can
activate functions associated with the displayed site. All relays and ICs
are socketed for easy removal and replacement.
The KTD-352 communicates with the matrix switcher via an RS422
signal over twisted-pair cable. Terminal strips are provided for all cable
connections, including cable shields. Multi-pin edge connectors are
used for card installation. As the KTD-350, all ICs are socketed for easy
removal and replacement.
Specifications
Input
(Provided by KTD-352 Relay Follow Chassis)
Voltage
8 VDC
Power
0.45 W
Data
RS422 (Slave signal)
Relay contacts (64)
Type
DPST dry contact
Rating
1 A @ 35 VDC
Mechanical
Weight
244 g
Ordering Information
KTD-350
Relay Follower Card, 64x1 Relay Output
E
E
E
E
64 two-wire inputs, 1 common output
Requires only 1" of vertical rack space
RS422 communication over twisted-pair cable
Removable terminal strips for easy cable connections
Digiplex
Page : 120
KTD-352
Relay follower chassis - accepts one KTD-350
The KTD-352 relay follow chassis and the KTD-350 relay follow card
make up the relay follower, which carries out functions associated with
the video site selection of a matrix switcher. These functions can
include automatically switching audio to the displayed site or
illuminating an LED (on a surveillance map) that corresponds with the
site.
The KTD-350 card plugs into the KTD-352 chassis, which contains a
micro-processor based, internal control card that provides power and
switch information to the KTD-350. This enables the KTD-350 relay
follow card to switch in conjunction with a KTD-340 video switcher
card, a KTD-348 matrix switcher output or a KTD-440/440N matrix
switcher output.
The KTD-350 card features 64 relays, each of which provides a 2-pole
closure between its respective input and the KTD-350's common
output. When a matrix switcher selects a camera site, each relay can
activate functions associated with the displayed site. All relays and ICs
are socketed for easy removal and replacement.
The KTD-352 communicates with the matrix switcher via an RS422
signal over twisted-pair cable. Terminal strips are provided for all cable
connections, including cable shields. Multi-pin edge connectors are
used for card installation. As the KTD-350, all ICs are socketed for easy
removal and replacement.
Specifications
Electrical
Input
Voltage
110 - 230 VAC to 12 VDC plug-in wall adapter
provided
12 VDC
Power
10.05 W
Data signal
RS422
Connections
Inputs
Multi-position removable terminal strips
Relay follow card
144-pin edge connector
Output, data signal, power
supply
7-position removable terminal
Mechanical
Weight
1.84 kg
Construction
Mounting ears
3.2 mm aluminum
Front panel
3.2 mm aluminum
Body
Polyurethane enamel, profile gray
Ordering Information
KTD-352
Relay follower chassis - accepts one KTD-350
E
E
E
E
E
64 two-wire inputs, 1 common output
Requires only 1" of vertical rack space
RS422 communication over twisted-pair cable
Removable terminal strips for easy cable connections
Accepts one KTD-350 relay follow card
Interfaces
Page : 121
KTD-415U
16 Input Alarm Module, PSU Included
The KTD-415 initiates local call-up of up to 16 preset positions on a
CyberDome® or other compatible PTZ receiver with preset
positioning capability.
Each of the KTD-415's 16 dry contact connections corresponds to
preset positions 0 through 15 on a PTZ receiver. Each preset consists of
a pan, tilt, zoom and focus position. The KTD-415 can operate with
receivers addressed 0 through 63. The receiver's address is set on the
unit's programmable DIP switch.
The KTD-415 also features a dry-contact output relay that activates
when one or more preset alarm contacts is closed. This dry contact
output can be fed to a KTD-463 alarm system or a KTD-348 alarm
interface, providing video call-up and site annunciation to the keypad
operator.
For custom applications, the KTD-415 can be configured to provide PTZ
control of a GE Security PTZ receiver through dry contacts.
Specifications
Electrical
Input voltage
12 VDC, adapter 110-230 VAC to 12 VDC included
Input power
1.5 W
Input data
RS422
Alarm inputs
Output data
Dry contacts or voltage source with ability to sink 3.5
mA current
RS422
Alarm output relay
1 A @ 35 VDC
Connections
RS422 in/out
6-pin removable terminal strip
Alarm contacts
Two 16-pin removable terminal strips
Auxiliary relay
6-pin removable terminal strip
Mechanical
Weight
317 g
Construction
1.3 mm aluminum
Finish
Black anodized
PTZ control (DIP switch selectable)
Call presets 0-3; Speed; Auto focus; Pan left; Tilt up; Tilt
down; Zoom in; Zoom out; Iris open; Iris close; Focus
near; Focus far
Ordering Information
KTD-415U
16 Input Alarm Module, PSU Included
E
E
E
E
E
E
E
E
E
E
E
16 dry contact connections
External power supply included
Automatic call-up of presets 0 - 15
Site addressable
Output relay for alarm interface
Custom PTZ control
Removable terminal strip
Compact: 229 x 80 x 28.2 mm
Wall-mountable
Easy-to-install
Economical
Interfaces
Page : 122
KTD-460U
Alarm input module
The KTD-460 is a Digiplex system alarm input module that monitors the
status of up to 16 dry alarm contacts or voltage sources. Each alarm
contact's status level - "normal", "alarm" or "trouble" - is transmitted to
the KTD-463 alarm chassis.
A "normal" status indicates that the alarm contact has not been
activated. "Alarm" indicates that the alarm contact has been activated.
"Trouble" indicates that a short or break has occurred on the alarm
input line. The alarm chassis processes this information and initiates
alarm functions in response to alarm events. Each contact may be
programmed for automatic camera call-up, site annunciation or preset
camera positioning.
The KTD-460 communicates with the KTD-463 via an RS485 signal over
twisted-pair cable. Up to 16 KTD-460s, installed in remote locations,
can be connected to one alarm chassis.
The KTD-460 features removable terminal strips for easy cable
attachments. It also features LED status indicator lights and a
10-position DIP switch for module addressing and signal termination.
Specifications
Electrical
Input voltage
12 VDC, adaptor 110-230VAC to 12 VDC included
Input power
1.5 W
Input data
RS485
Alarm inputs
Output data
Dry contacts or voltage sources with ability to sink 3.5
mA current.
RS485
Alarm output relay
1 A @ 35 VDC
16 dry alarm contacts or voltage sources
Three status levels: normal, alarm and trouble
Alarm output relay
RS485 communication over twisted-pair cable
Remote installation
Removable terminal strips
LED status indicator lights
DIP switch programming
E 12 VDC power, external adapter 110-230VAC to 12 VDC
Connections
RS485 in/out & auxiliary relay 6-pin removable terminal strip
data
Alarm contacts data
Two 16-pin removable terminal strips
Mechanical
Weight
317 g
Construction
1.3 mm aluminum
Finish
Black anodized
Alarm contact programming
Site number
Assignable, 0 - 511
Contact sense
Normally open or normally closed
Video alarm
Video call-up on matrix switcher, yes or no
Hold delay
Annunciation
Alarm hold after event, 0-14 seconds or infinite
(cleared by keypad)
Site annunciation on KTD-304/404, yes or no
Find preset
Call up preset position on PTZ drive, yes or no
Position
Preset position number, 1 - 64
Report trouble
Enable or disable
Ordering Information
KTD-460U
E
E
E
E
E
E
E
E
Alarm input module
included
Interfaces
Page : 123
KTD-463U
Alarm input chassis
Hold delay
The KTD-463 is a desktop alarm chassis that initiates camera call-up,
site annunciation and preset camera positioning during an alarm
event. It triggers these functions in response to data from the KTD-460
alarm input modules, each of which can monitor the status of up to 16
dry alarm contacts or voltage sources.
Annunciation
Alarm hold after event, 0-14 seconds or infinite
(cleared by keypad)
Site annunciation on KTD-304/404, yes or no
Find preset
Call up preset position on PTZ drive, yes or no
Position
Preset position number, 1-64
Report trouble
Enable or disable
Ordering Information
The alarm input module constantly transmits information about the
status level of each contact to the KTD-463. When the KTD-463 senses
an alarm event, it prompts alarm functions in other Digiplex system
components. These alarm events also activate the KTD-463's output
relay, which can initiate a variety of functions like starting a VCR or
triggering an audible alarm.
KTD-463U
Alarm input chassis
The KTD-463 provides 16 input ports, allowing it to accommodate up to
16 KTD-460 Alarm Input Modules. The modules may be daisy-chained
onto one port or connected to multiple ports in any combination. Since
each alarm input module provides connection points for up to 16 dry
alarm contacts or voltage sources, the KTD-463 alarm chassis can
monitor up to 256 alarm points. Each point may be programmed for
contact sense and selectable hold delay, which keeps the alarmed site
on the monitor screen for a user-defined amount of time after the
alarm condition has ended.
The KTD-463 communicates with other Digiplex components via an
RS422 signal over twisted-pair cable. It is supplied with optional-use,
rack-mount ears for suspension in a standard, 19 inch rack. It features
a liquid crystal display as well as an RS232 port for monitoring the
KTD-463's alarm activity and downloading the unit's programming
setup parameters.
Specifications
Electrical
Input voltage
12 VDC, adapter 100-230VAC to 12 VDC included
Input power
4.9 W
Input Digiplex data
RS422
Input KTD-460 alarm
RS485
Output Digiplex data
RS422
Output data port
Serial RS232 (1200-9600 baud)
Alarm output relay
1 A @ 35 VDC
Connections
RS422 in/out & auxiliary relay 6-pin removable terminal strip
data
KTD-460 modules (RS485
in/out)
Two 16-pin removable terminal strips
Power
5 mm jack
Printer data
RJ45
Mechanical
Weight
1.17 kg
Construction and finish
Extruded aluminum & vinyl clad steel
Alarm contact programming
Site number
Assignable, 0-511
Contact sense
Normally open or normally closed
Video alarm
Video call-up on matrix switcher, yes or no
E
E
E
E
E
E
E
E
E
E
Remotely monitors contact status
Multiple tasks assigned to contacts
Initiates automatic alarm functions
Capacity for up to 16 KTD-460 modules per chassis
256 contact inputs (16 per module)
RS422 communication via twisted-pair cable
Output relay for external devices
Menu-driven contact programming
Programmable hold delay
Programmable contact sense
INTERFACES
GE Security offers an extended range of interfaces allowing an
easy integration of matrix switchers, Cyberdomes and pan & tilt units.
Interfaces
Page : 127
KTD-83U
RS422 data signal distributor-provides six separate RS422 outputs
The KTD-83U is a data signal distributor designed for use in a Digiplex
system. It is used when an RS422 control signal must be dispersed
along separate lines of two-conductor, twisted-pair cable. One signal
input can be distributed among up to six outputs. The KTD-83U can
also be used to reamplify RS422 control signals that must travel
excessive distances between the controller and receiver.
Cable connections are made on a removable, 14-position terminal
strip. The KTD-83U is constructed of aluminum. It features a black
anodized finish.
Specifications
Electrical
Input voltage
12 VDC, adapter 110 - 230 VAC to 12 VDC supplied
Input power
6W
Input data signal
RS422
Output 1
RS422 (Not amplified)
Outputs 2-6
RS422 (Amplified to original level)
Connections
14-position removable terminal strip
Mechanical
Weight
230 g
Material
1.3 mm aluminum
Finish
Black anodize
Ordering Information
KTD-83U
RS422 data signal distributor-provides six separate RS422
outputs
E
E
E
E
E
E
E
Distributes an RS422 control signal
1 input x 6 outputs
Reamplifies signal on outputs 2 through 6
Powered from a 12 VDC source
Adapter 110-230 VAC to 12 VDC included
Compact design
Removable terminal strip for cable connections
Interfaces
Page : 128
RS422 data signal distributor - provides 16 separate RS422 outputs
KTD-83-16U
The KTD-83-16 is a data signal distributor that is designed for use in a
Digiplex system. It is used when an RS422 data signal must be
dispersed along separate lines of 2-conductor, twisted-pair cable. One
signal input can be distributed among up to 16 outputs. The KTD-83-16
can also be used to reamplify RS422 signals that must travel excessive
distances between the controller and receiver.
Cable connections are made on two removable, 16-position terminal
strips. It is powered from a 12 VDC source, adapter 100-230 VAC to 12
VDC included. The KTD-83-16 is constructed of aluminum. It features a
black anodized finish.
Specifications
Electrical
Input voltage
12 VDC, adapter 110 - 230 VAC to 12 VDC included
Input power
12.0 W
Input data signal
RS422
Output signal (outputs 1-16)
RS422 (Amplified to original level)
Connections
Two 16-position removable terminal strips
One 2-position removable terminal strips
Mechanical
Weight
300 g
Material
1.3 mm aluminum
Finish
Black anodized
Ordering Information
KTD-83-16U
RS422 data signal distributor - provides 16 separate RS422
outputs
E
E
E
E
E
E
E
Distributes RS422 data signal
1 input x 16 outputs
Reamplifies signal on outputs 1 through 16
Powered from a 12 VDC source
Adapter 110-230 VAC to 12VDC included
Removable terminal strip for cable connections
Compact design
Interfaces
Page : 129
DTMF signal merger, 6 signals merged and amplified to 1 common output
The KTD-86 DTMF signal merger provides isolation between up to six
DTMF call-in cables. It is designed for use in a Digiplex system.
When the cables enter the KTD-86, they are merged by an internal
summing amplifier for transmission to a common output. Because
each input is buffered, none will load or electrically interfere with any
of the other inputs. All inputs and the output are further isolated with
600 ohm transformers. A 14-position removable terminal strip is
provided for cable connections.
The KTD-86 is encased in a wall-mountable housing unit. It features a
black anodized finish.
Up to six DTMF call-in lines can enter the KTD-86 and be merged by an
internal summing amplifier for transmission to a common output. This
may be useful for applications when the cables connect to fiber optic,
microwave or other active devices.
Specifications
Electrical
Input voltage
115 VAC
Input power
2.5 V
Input data signal
DTMF, 0.5 V to 1.5 V pk-pk
Output data signal
DTMF, 0.5 V to 1.5 V pk-pk
Connections
Data signal
14-position removable terminal strip
Power
Three-prong 115 VAC plug
Mechanical
Weight
520 g
Construction
1.3 mm aluminum
Finish
Black anodized
Ordering Information
KTD-86
DTMF signal merger, 6 signals merged and amplified to 1
common output
E
E
E
E
E
E
Merges up to six call-in request lines
Isolates each input line
Unity gain
600 ohm inputs and output
Wall-mountable housing
Removable terminal strip
KTD-86
Interfaces
Page : 130
KTD-87E4
RS422 / RS232 converter (selectable)
The KTD-87E4 is used to interface a CCTV system RS422 control signal
with equipment requiring an RS232 voltage format. Using internal
programming jumpers, the KTD-87 can be configured to convert an
RS422 signal to an RS232 signal or vice versa. It is commonly used
when the control signal interfaces with a modem.
RCA-type phono jacks are provided for cable connections. All ICs are
socketed for easy removal and replacement.
Specifications
Electrical
Input voltage
220 VAC
Input power
2.0 W
Input data signal
RS422 or RS232, selectable
Output data signal
RS422 or RS232, selectable
Connections
Data signals
RCA phono jacks
Mechanical
Weight
290 g
Construction
ABS plastic
Finish
Black
Ordering Information
KTD-87E4
RS422 / RS232 converter (selectable)
E Convert an RS422 signal to an RS232 signal or vice
versa
E Compact size
E Convenient cable connections
E Easy to program
Interfaces
Page : 131
KTD-312U
RS232/RS422 interface unit
The KTD-312 is a multi-functional device that can be field programmed
to operate as a computer interface or data merger. It is designed for
use in a Digiplex system.
The KTD-312 features a DTMF input port. It provides an RJ45 connector
for the RS232 interface. All other cable connections are made on a
removable terminal strip. An RJ45 connection cable, RJ45-to-DB9
adapter and a 110-230 VAC to 12 VDC adapter are included with the
unit.
When used as a computer interface, the KTD-312 establishes a
communication link between a Digiplex CCTV control system and an
external computer. This feature enables the computer to monitor
alarms, download information and control a variety of Digiplex system
devices. These include PTZ domes and receivers, matrix switchers and
auxiliary receivers. Components are controlled via seven-character
ASCII strings. A limited number of functions may be transmitted from
the KTD-312 to the computer via five-character ASCII strings.
When operating as a data merger, the KTD-312 can combine two
Digiplex RS422 control signals into one common output signal.
Specifications
Electrical
Input voltage
12VDC. Adapter 110-230 VAC to 12 VDC included
Input power
3.6 W
Input computer port
RS232
Ordering Information
KTD-312U
RS232/RS422 interface unit
E
E
E
E
E
E
E
E
Functions as a computer interface or data merger
Field programmable
Simple seven-character ASCII control commands
Selectable baud rates
RS232 interface port
DTMF input port
Simple connections
LED status indicator light
Interfaces
Page : 132
KTD-313U
Code converter
The KTD-313 data converter is a 10-way protocol translator that
converts American Dynamics (AD) Manchester, Video Controls Limited
(VCL), Diamond, Pelco P and Pelco D protocol to Digiplex® RS422 and
converts Digiplex RS422 protocol to AD Manchester, pelco and
Diamond protocol. This enables multiple GE Security PTZ receivers to
be controlled on a single twisted-pair line by AD Manchester, Diamond,
and Pelco head-end systems. It also enables one or more GE Security
controllers to operate AD Manchester, Diamond and Pelco receivers.
When used to convert to Digiplex RS422, the KTD-313 also provides
preset control of GE Security receivers. When paired with
variable-speed controllers, it provides variable-speed control of the
CyberDome. The KTD-313 also provides an 8-position DIP switch that is
field programmable.
Specifications
Electrical
Input voltage
12 VDC. Adapter 110 - 230 VAC to 12 VDC included
Input power
1.35 W
Input serial port
AD Manchester, Video Controls Limited (VCL),
Diamond, Pelco and Digiplex compatible
RS422, AD Manchester, Diamond, pelco and Digiplex
compatible
Output Digiplex port
Data
RS422 speed
4800 baud
Protocol
(DIP switch selectable) AD Manchester and Digiplex,
RS422 and Diamond
Commands recognized
Autopan, find preset, set preset, zoom in, zoom out,
focus near, focus far, iris open, iris close, tilt up, tilt
down, pan left, pan right
Connections
Power, digital in/out
Six-position removable terminal strip
Mechanical
Weight
99 g
Construction
1.3 mm aluminum
Finish
Black anodize
Ordering Information
KTD-313U
Code converter
E AD Manchester, VCL, Diamond, or Pelco interface
E Converts protocol so that AD Manchester, VCL,
Diamond, Pelco P and Pelco D can be integrated with
Digiplex RS422
E
E
E
E
E
Preset control of PTZ receivers
Removable terminal strip
Compact and wall-mountable
Easy to install
Low cost
Interfaces
Page : 133
KTD-314
Digiplex code converter
The KTD-314 is an interface device that converts Pelco System 9500
extended protocol commands to a Digiplex RS422 output, enabling a
Pelco Coaxitron system to control GE Security PTZ receivers and
domes. The output enables pan/tilt, lens, autopan, and preset control
of a CyberDome, a KTA-12-series dome or a KTD-120-series receiver.
One KTD-314 is required for each GE Security receiver in a Pelco
system.
The easy-to-install, compact unit features wall-mountable housing,
BNC connectors for coaxial cables, and a removable terminal strip for
power and RS422 connections. The KTD-314 is powered by 24 VAC,
enabling it to be located near the receiver and connected to the same
power source (power supply not included). Additionally, the unit's
transformer provides isolation to prevent video interference. An LED
video signal indicator displays the status of incoming video and control
signals.
tilt up/Joystick Up
tilt down/Joystick Down
find preset/PRESET GO
set preset/PRESET SET
Pelco controllers do not have all the commands
necessary to completely control all CyberDome
functions.
If variable speed control of the GE Security dome is
desired, operators must use a Pelco controller with
variable speed control.
Preset titling and other programming in CyberDomes
can be done by connecting a GE Security controller to
the dome.
Pelco "zones" and "zone titling" are not supported.
Notes
Ordering Information
KTD-314
Digiplex code converter
Specifications
Electrical
Input voltage
24 VAC
Input power
2.5 W
Output Digiplex port
RS422
Data
RS422 speed
4800 baud
Protocol data in
Pelco Coaxitron 9500 extended protocol
Protocol data out
Digiplex RS422
Video
Input (1)
1 V pk-pk
Output (1)
1 V pk-pk
Impedance
Hi-Z
Commands recognized
Autopan, find preset, set preset, zoom in, zoom out,
focus near, focus far, iris open, iris close, tilt up, tilt
down, pan left and pan right
Connections
Power, Digiplex
Four-position removable terminal strip
Video coax
Two BNC connectors
Mechanical
Weight
110 g
Construction
1.3 mm aluminum
Finish
Black anodize
Command translation
The list below represents compatible commands
between Pelco Coaxitron controllers and Digiplex
receivers. For this Digiplex result / Use this Pelco
entry:
focus near/FOCUS NEAR
focus far/FOCUS FAR
iris open/IRIS OPEN
iris close/IRIS CLOSE
zoom in/ZOOM TELE
zoom out/ZOOM WIDE
autopan on/PAN AUTO
autopan off/PAN MAN
pan right/Joystick Right
pan left/Joystick Left
E
E
E
E
E
E
E
E
E
Converts Pelco protocol to Digiplex protocol
System 9500 Coaxitron interface
Preset control of PTZ receiver
Compact and wall-mountable
Easy to install
Removable terminal strip
24 VAC power
Isolated transformer
LED video signal indicator
Interfaces
Page : 134
KTD-314-1U
Coaxitron Interface Unit, Universal
The KTD-314-1 is an interface device that converts Digiplex® RS422
commands to a Pelco Coaxitron 9500 extended protocol output,
enabling a Digiplex system to control Pelco receivers and domes. The
output enables iris, focus, zoom and preset control of a Pelco receiver.
One KTD-314-1 is required for each Pelco receiver in a Digiplex system.
The easy-to-install, compact unit features wall-mountable housing,
BNC connectors for coaxial cables and a removable terminal strip for
power and RS422 connections. The KTD-314-1 is powered by 9 VAC. An
LED video signal indicator displays the status of incoming video and
control signals.
Specifications
Electrical
Input voltage
9 VAC adapter 100-230 VAC to 9 VAC included
Input power
1.0 W
Output port
RS422
Data
RS422 speed
4800 baud
Protocol data in
Digiplex RS422
Protocol data out
Pelco Coaxitron 9500 extended protocol
Video
Input (1)
1 V pk-pk
Output (1)
1 V pk-pk
Impedance
Into 75 ohm load, 75 ohm in and out
Commands recognized
Find preset, set preset, zoom in, zoom out, focus near,
focus far, iris open and iris close
Connections
Power, Digiplex
Four-position removable terminal strip
Video coax
Two BNC connectors
Mechanical
Weight
110 g
Construction
1.3 mm aluminum
Finish
Black anodize
Command translation
The list below represents compatible commands
between GE Security Digiplex controllers and Pelco
receivers. For this Pelco result / Use this Digiplex entry:
IRIS CLOSE/iris close
IRIS OPEN/iris open
FOCUS NEAR/focus near
FOCUS FAR/focus far
ZOOM WIDE/zoom out
ZOOM TELE/zoom in
PRESET SET/set preset
PRESET GO/find preset
There is no GE Security equivalent to the Pelco "turbo"
button; Instead, maximum joystick deflection on the
GE Security keypad produces "turbo" speed in the
Pelco dome.
Pelco "tours", "patterns", "zones" and "zone titling"
operations; "zoom" and "focus" speed programming;
and "AUX" functions are not supported.
Notes
Ordering Information
KTD-314-1U
Coaxitron Interface Unit, Universal
E
E
E
E
E
E
E
E
Converts Digiplex protocol to Pelco protocol
System 9500 Coaxitron interface
Preset control of PTZ receiver
Removable terminal strip
9 VAC power
LED video signal indicator
Compact and wall-mountable
Easy to install
Interfaces
Page : 135
KTD-410U
Protocol converter
The KTD-410 is a protocol converter that translates Digiplex® RS422
protocol to ASCII RS232 protocol and vice versa, making it possible to
transmit data over standard telephone or fiber optic lines that do not
accept constant data.
The KTD-410 can be programmed to function in one of two modes:
Digiplex RS422 in / ASCII RS232 out or ASCII RS232 in / Digiplex RS422
out. Repeating and non-repeating messages can be transmitted.
Repeating messages are terminated when the KTD-410 receives the
stop-form of the original message, a competing command or the
special "universal cancel" command.
Depending on mode, the KTD-410's built-in LED can indicate when an
ASCII signal or non-token Digiplex command is being sent or when a
Digiplex signal is being received.
Specifications
Electrical
Input voltage
12 VDC. Adapter 100-230 VAC to 12 VDC included
Input power
0.6 W
Input data
RS422 or RS232
Output data
RS232 or RS422
Output analog
0 - 5 VDC
Controls
12-position DIP switch data
term.
DIP switch positions 11 and 12
Mechanical
Weight
90 g
Construction
Molded black ABS - UL 94 HB
Connections
Data signal input
10-position removable terminal strip
Terminal positions 1, 2
Data signal output
Terminal positions 3, 4
RS232 ASCII Input
Terminal positions 5, 7
RS232 ASCII Output
Terminal positions 6, 7
Ordering Information
KTD-410U
Protocol converter
E Translates Digiplex RS422 protocol to ASCII RS232
protocol and vice versa
E Transmits repeating and non-repeating messages
E LED status indicator
E Compact: 106.17 x 60.96 x 25.40 mm
Interfaces
Page : 136
KTD-93U
Auxiliary device driver
The KTD-93 is a small auxiliary device driver that facilitates keypad
control over multiplexers and VCRs. It allows remote multiplexer view
control from the KTD-400 and KTD-404 keypads. It also provides
remote VCR control from the KTD-400 keypad. A KTD-93 is required for
each multiplexer and VCR in a Digiplex system. The unit receives an
RS422 or RS232 input and provides an RS232 or analog output to the
remote device.
The KTD-93's 12-position DIP switch can be programmed to address
many major-brand multiplexers. Up to 25 views can be displayed on
one monitor in any of several multi-screen formats, depending on
brand. Consult your multiplexer user's guide for details.
The KTD-93 may also be programmed to address Sanyo, Sony and
Toshiba brand VCRs. VCR control capabilities include play, record,
adjust recording speed, rewind or reverse, fast forward or search, stop
and eject. Contact the manufacturer for information about compatible
VCR models.
An LED status indicator and removable terminal strip facilitate easy
installation. The unit is provided with a 110-230 VAC to 12 VDC adapter.
Specifications
Electrical
Input voltage
12 VDC. Adapter 110 - 230 VAC to 12 VDC included
Input power
0.6 W
Input data
RS422 or RS232
Output data
RS232
Output analog
0-5 VDC
Controls
12-position DIP switch
Address
DIP switch positions 1-7
Device type programming
DIP switch positions 1-10
Data termination
DIP switch positions 11-12
Mechanical
Weight
90 g
Construction
Molded black ABS - UL 94 HB
Connections
10-position removable terminal strip
Data signal input
Terminal positions 1, 2
Data signal output
Terminal positions 3,4
RS232 ASCII input
Terminal positions 5,7
Multiplexer output
Terminal positions 6,7
Analog output
Terminal positions 8,9,10
Ordering Information
KTD-93U
Auxiliary device driver
E
E
E
E
E
E
E
E
Multiplexer view control
VCR control
RS422 data and RS232 input
RS232 or analog output
DIP switch programmable
Removable terminal strip
Easy installation
Low cost
Receivers
Page : 137
KTD-125-24E4
PTZ receiver 24 VAC, 230 VAC power
Ordering Information
KTD-125-24E4
The KTD-125-24E is a weatherproof PTZ receiver designed to drive a 6
to 12 V motorized lens and a medium- or heavy-duty pan/tilt unit with
24 VAC motors. The KTD-125-24E4's internal circuit panel consists of a
main relay board, a plug-in decoder card and removable terminal
strips for cable connections. The circuit panel is enclosed in a
weatherproof fiberglass housing and is mounted on swivel pins which
enable it to swing sideways to provide easy access to the rear of the
housing. Watertight connectors are provided for pan/tilt and camera
housing cables.
PTZ receiver 24 VAC, 230 VAC power
The KTD-125-24E4 is controlled via twisted-pair cable from one or
more remote Digiplex keypads. To facilitate servicing, local switches
are provided to allow direct operation of control functions at the
receiver site. All relays and ICs are socketed for easy removal and
replacement.
Microprocessor-based circuitry enables mode-of- operation
programming by either a remote keypad or the receiver's DIP switch.
Among the choices are lens voltage, lens polarity and autopan mode
(50 percent duty cycle, random scan, continuous pan). All programmed
data is stored in non-volatile memory.
Specifications
E Drives 24 VAC pan/tilt motors
E Easily removable PC board
E On-site control switches
E Corrosion-proof housing with 230 to 24 VAC
transformer
Electrical
Input voltage
230 VAC
Input power
8.0 W (excl. external equipment)
Input data signal
RS422
Output voltage lens
± 6 or 12 VDC, programmable
Output voltage pan/tilt drive 24 VAC
Output voltage camera power 24 VAC
Relay contact rating
7.5 A at 120 VAC
Functions
Zoom in, zoom out, focus near, focus far, iris open, iris
close, pan left, pan right, tilt up, tilt down, auto pan
(100%, 50%, and random), auxiliary latching relay
Controls
Power
DPST toggle switch
Function controls
SPDT toggle switches
Site select
Multi-position DIP switch
Auto reverse mode
Jumper selectable
Connections
Input signal
Four-position terminal strip
Power input
3-pin locking connector
Outputs
15-position removable terminal strip
Mechanical
Weight
4.2 kg
Enclosure
Gray fiberglass (When fitted with watertight seal
devices, this enclosure meets NEMA 3, 4X and 12
specifications)
Accessories
KTD-88 Wiper Washer Card
This small circuit card plugs into the KTD-125-24's
auxiliary port and provides two dry contact relays
that are used to operate washer and wiper motors for
the site's camera housing. The contacts are SPDT
(Form A) and are rated for 0.5 A at 120 VAC.
E
E
E
E
E
Solid state lens circuitry: 6 to 12 V
Three autopan modes
Preset position with local alarm inputs
Auxiliary relay outputs
Accommodates most manufacturers pan/tilt units
Receivers
Page : 138
KTD-125P-24E4
PTZ receiver 24 VAC with preset, 230 VAC power
Ordering Information
KTD-125P-24E4
The KTD-125P-24E4 is a weatherproof PTZ receiver designed to drive a
6 to 12 V motorized lens and a medium- or heavy-duty pan/tilt unit
with 24 VAC motors. The KTD-125P-24E4's internal circuit panel
consists of a main relay board, a plug-in decoder card and removable
terminal strips for cable connections. The circuit panel is enclosed in a
weatherproof fiberglass housing and is mounted on swivel pins which
enable it to swing sideways to provide easy access to the rear of the
housing. Watertight connectors are provided for pan/tilt and camera
housing cables.
PTZ receiver 24 VAC with preset, 230 VAC power
The KTD-125P-24E4 is controlled via twisted-pair cable from one or
more remote Digiplex keypads. To facilitate servicing, local switches
are provided to allow direct operation of control functions at the
receiver site. All relays and ICs are socketed for easy removal and
replacement.
Microprocessor-based circuitry enables mode-of- operation
programming by either a remote keypad or the receiver's DIP switch.
Among the choices are lens voltage, lens polarity and autopan mode
(50 percent duty cycle, random scan, continuous pan). All programmed
data is stored in non-volatile memory.
Specifications
E Drives 24 VAC pan/tilt motors
E Easily removable PC board
E On-site control switches
E Corrosion-proof housing with 230 to 24 VAC
transformer
Electrical
Input voltage
230 VAC
Input power
8.0 W (excl. external equipment)
Input data signal
RS422
Output voltage lens
± 6 or 12 VDC, programmable
Output voltage pan/tilt drive 24 VAC
Output voltage camera power 24 VAC
Relay contact rating
7.5 A at 120 VAC
Functions
Zoom in, zoom out, focus near, focus far, iris open, iris
close, pan left, pan right, tilt up, tilt down, auto pan
(100%, 50%, and random), auxiliary latching relay
Controls
Power
DPST toggle switch
Function controls
SPDT toggle switches
Site select
Multi-position DIP switch
Auto reverse mode
Jumper selectable
Connections
Input signal
Four-position terminal strip
Power input
3-pin locking connector
Outputs
15-position removable terminal strip
Mechanical
Weight
4.2 kg
Enclosure
Gray fiberglass (When fitted with watertight seal
devices, this enclosure meets NEMA 3, 4X and 12
specifications)
Accessories
KTD-88 Wiper Washer Card
This small circuit card plugs into the KTD-125-24's
auxiliary port and provides two dry contact relays
that are used to operate washer and wiper motors for
the site's camera housing. The contacts are SPDT
(Form A) and are rated for 0.5 A at 120 VAC.
E
E
E
E
E
Solid state lens circuitry: 6 to 12 V
Three autopan modes
Preset position with local alarm inputs
Auxiliary relay outputs
Accommodates most manufacturers pan/tilt units
Receivers
Page : 139
KTD-127
Light duty PTZ receiver 24 VAC
Ordering Information
KTD-127
The KTD-127 is a PTZ (pan/tilt/zoom) receiver that can drive a 6 to 12 V
motorized lens and a light-duty PT unit with 24 VAC motors that draw
less than 1 A.
Light duty PTZ receiver 24 VAC
The KTD-127's internal circuit panel consists of a main relay board, a
plug-in decoder card and a removable terminal strip for cable
connections. It is mounted in a compact aluminum housing and
features a snap-on cover. The KTD-127 can also be ordered with a
weatherproof housing unit for outdoor applications.
The KTD-127 is controlled via twisted-pair cable from one or more
remote Digiplex keypads. Local switches facilitate service by providing
direct access to control functions at the receiver site. Relays and ICs
are socketed for easy removal and replacement.
Microprocessor-based circuitry enables a remote keypad or the
receiver's DIP switch to be used to program the KTD-127's modes of
operation. Programming options include lens voltage, lens polarity and
auto pan. The auto pan modes are 50 percent duty cycle, random
scan, continuous pan and disabled. All programmed data is stored in
non-volatile memory.
Specifications
Electrical
Input voltage
24 VAC, 50 to 60 Hz
Input power
7.0 W (External equipment excluded)
Input maximum power
24 V
Input data signal
RS422
Output voltage lens
± 6 or 12 VDC, programmable
Output voltage pan/tilt drive 24 VAC
Output voltage camera power 24 VAC
Relay contact rating
3 A @ 24 VAC
Controls
Function controls
SPDT toggle switches
Site select
Multi-position DIP switch
Auto reverse mode
Jumper selectable
Connections
Input signal
Four-position terminal strip
Power input, outputs
14-position removable terminal strip
Functions
Zoom in, zoom out, focus near, focus far, iris open, iris
close, pan right, pan left, tilt up, tilt down, auto pan
(100 %, 50 % and random)
Mechanical
Indoor housing weight
0.91 kg
Indoor housing enclosure
3.18 mm aluminum
Indoor housing finish
Black anodize
Options
Weatherproof housing (W)
The KTD-127 PTZ Receiver can be enclosed in a
weatherproof housing for outdoor applications.
Watertight connectors are provided for both the
pan/tilt and lens cables.
Weatherproof housing weight 2.27 kg
Weatherproof housing
enclosure
Gray fiberglass (When fitted with watertight seal
devices, this enclosure meets NEMA 3, 4X and 12
specifications)
E
E
E
E
E
E
E
Drives light-duty 24 VAC PT motors
Easily removable PC board
On-site control switches
Compact indoor and weatherproof housings
Solid-state lens circuitry, 6 to 12 V
Four auto pan modes
Compatible with most manufacturers' PT units
Receivers
Page : 140
KTD-128P
Light duty PTZ receiver 24 VAC
The KTD-127 is a PTZ (pan/tilt/zoom) receiver that can drive a 6 to 12 V
motorized lens and a light-duty PT unit with 24 VAC motors that draw
less than 1 A.
The KTD-127's internal circuit panel consists of a main relay board, a
plug-in decoder card and a removable terminal strip for cable
connections. It is mounted in a compact aluminum housing and
features a snap-on cover. The KTD-127 can also be ordered with a
weatherproof housing unit for outdoor applications.
The KTD-127 is controlled via twisted-pair cable from one or more
remote Digiplex keypads. Local switches facilitate service by providing
direct access to control functions at the receiver site. Relays and ICs
are socketed for easy removal and replacement.
Microprocessor-based circuitry enables a remote keypad or the
receiver's DIP switch to be used to program the KTD-127's modes of
operation. Programming options include lens voltage, lens polarity and
auto pan. The auto pan modes are 50 percent duty cycle, random
scan, continuous pan and disabled. All programmed data is stored in
non-volatile memory.
E Extra small to fit inside most domed camera housing
units
Specifications
Electrical
Input voltage
24 VAC, 50 - 60 Hz
Input power
5.0 W (External equipment excluded)
Input maximum power
24 V
Input data signal
RS422
Output voltage lens
± 6 or 12 VDC, programmable
Output voltage pan/tilt drive 24 VAC
Output voltage camera power 24 VAC
Relay contact rating
2 A @ 30 VDC
Functions
Zoom in, zoom out, focus near, focus far, iris open, iris
close, pan left, pan right, tilt up, tilt down
Controls
Site select
Multi-position DIP switch
Connections
Input signal, power, outputs
13 position removable terminal strip
Mechanical
Weight
290 kg
Mounting plate material
0.125 in. aluminum
Mounting plate finish
Black anodize
Ordering Information
KTD-128P
Light duty PTZ receiver 24 VAC
E
E
E
E
Drives light-duty 24 VAC PT motors
Easily removable PC board
Solid-state lens circuitry: 6 - 12 V
Compatible with most manufacturers' PT units
VIDEO SWITCHERS
The GE Security range of video switchers has been designed
to withstand the rigours of everyday use and meet the
requirements of today's smaller system applications.
Video switchers
Page : 143
KTS-204U
Sequential switcher, 4 position, looping.
The KTS-204U is one of GE Security's desktop series video switchers, a
device capable of receiving up to four camera inputs and switching
those video inputs to a single monitor output (includes a second
monitor output option). This compact switcher is equipped with
easy-to-use programming options and connectors for a variety of
peripheral devices.
This micro-controller product comes with an on-screen display for
programming which shows current video input, input names, loss of
video detection, alarms and sequencing. Programming and basic
operation is performed through the attractive elasto-numeric keypad
on the front of the unit and the use of LEDs to indicate the state of the
switcher to the user.
Users can set programming options by entering information through a
simple system of on-screen menus. These programming options are
based on the needs of each installation and can include sequencing
tours, alarms, audio follow, looping and an external trigger. Sequence
routines can be set to respond with different delay times and react to a
variety of inputs. Alarms can be set to override sequence routines and
an external trigger can be used to time the sequence routines.
Peripheral devices can include alarms, audio follow and an external
trigger device, most usually a VCR. The KTS-204U also provides the
option of looping BNC connectors to allow the use of yet another
auxiliary device.
The KTS-204U is a compact unit designed for desktop use but it can
also be rack-mounted. Rack-mounted, the KTS-204U would take up
only 1 U of rack space.
Specifications
Electrical
Input voltage
12 VDC. Adapter 110 - 230 VAC to 12 VDC included
Input power
3W
Video
Inputs
Composite video, 1 V pk-pk
Outputs
Composite video, 1 V pk-pk
Impedance
75 ohm inputs/75 ohm outputs
3 dB frequency
7.0 MHz
Signal/noise
-60.0 dB RMS
Differential gain
± 1%
Differential phase
± 1°
Connections
Video
BNC connectors
Mechanical
Weight
430 g
Dimensions
11.05 x 18.77 x 4.42 cm (incl. connectors)
Rack mount
1 U vertical rack space; 1/4 horizontal rack space
Material
Aluminum
Finish
Dark gray powder coat
Ordering Information
KTS-204U
Sequential switcher, 4 position, looping.
E
E
E
E
E
E
E
E
E
E
Four video channels
Second monitor output (optional)
Four looping connectors
Programmable sequence tours
Audio follow
Alarm programming
External trigger port
Auxiliary port
Rack-mountable
NTSC or PAL
Video switchers
Page : 144
KTS-210U
Sequential Switcher, 10 Position, Looping.
The KTS-210U is one of GE Security's desktop series video switchers, a
device capable of receiving up to ten camera inputs and switching
those video inputs to a single monitor output (includes a second
monitor output option). This compact switcher is equipped with
easy-to-use programming options and connectors for a variety of
peripheral devices.
This micro-controller product comes with an on-screen display for
programming which shows current video input, input names, loss of
video detection, alarms and sequencing. Programming and basic
operation is performed through the attractive elasto-numeric keypad
on the front of the unit and the use of LEDs to indicate the state of the
switcher to the user.
Users can set programming options by entering information through a
simple system of on-screen menus. These programming options are
based on the needs of each installation and can include sequencing
tours, alarms, audio follow, looping and an external trigger. Sequence
routines can be set to respond with different delay times and react to a
variety of inputs. Alarms can be set to override sequence routines and
an external trigger can be used to time the sequence routines.
Peripheral devices can include alarms, audio follow, and an external
trigger device, most usually a VCR. The KTS-210U also provides the
option of looping BNC connectors to allow the use of yet another
auxiliary device.
The KTS-210U is a compact unit designed for desktop use but it can be
rack-mounted. Rack-mounted, the KTS-210U would take up only 1 U of
rack space.
Specifications
Electrical
Input voltage
12 VDC. Adapter 110 - 230 VAC to 12 VDC included
Input power
3. W
Video
Inputs
Composite video, 1 V pk-pk
Outputs
Composite video, 1 V pk-pk
Impedance
75 ohm inputs/75 ohm outputs
3 dB frequency
7 MHz
Signal/noise
-60 dB RMS
Differential gain
± 1%
Differential phase
± 1°
Connections
Video
BNC connectors
Mechanical
Weight
750 g
Dimensions
21.10 x 18.80 x 4.42 cm (incl. connectors)
Rack mount
1 U vertical rack space; 1/2 horizontal rack space
Material
Aluminum
Finish
Dark gray powder coat
Ordering Information
KTS-210U
Sequential Switcher, 10 Position, Looping.
E
E
E
E
E
E
E
E
E
E
Ten video channels
Second monitor output (optional)
Ten looping connectors
Programmable sequence tours
Audio follow
Alarm programming
External trigger port
Auxiliary port
Rack-mountable
NTSC or PAL
Video switchers
Page : 145
KTS-216U
Sequential switcher, 16 position, looping.
The KTS-216U is one of GE Security's new desktop series video
switchers, a device capable of receiving up to sixteen camera inputs
and switching those video inputs to a single monitor output (includes a
second monitor output option). This compact switcher is equipped with
easy-to-use programming options and connectors for a variety of
peripheral devices.
This micro-controller product comes with an on-screen display for
programming which shows current video input, input names, loss of
video detection, alarms and sequencing. Programming and basic
operation is performed through the attractive elasto-numeric keypad
on the front of the unit and the use of LEDs to indicate the state of the
switcher to the user.
Users can set programming options by entering information through a
simple system of on-screen menus. These programming options are
based on the needs of each installation and can include sequencing
tours, alarms, audio follow, looping and an external trigger. Sequence
routines can be set to respond with different delay times and react to a
variety of inputs. Alarms can be set to override sequence routines and
an external trigger can be used to time the sequence routines.
Peripheral devices can include alarms, audio follow, and an external
trigger device, most usually a VCR. The KTS-216U also provides the
option of looping BNC connectors to allow the use of yet another
auxiliary device.
The KTS-216U is a compact unit designed for desktop use but it can
also be rack-mounted. Rack-mounted, the KTS-216U would take up
only 1 U of rack space.
Specifications
Electrical
Input voltage
12 VDC. Adapter 110 - 230 VAC to 12 VDC included
Input power
3.0 W
Video
Inputs
Composite video, 1 V pk-pk
Outputs
Composite video, 1 V pk-pk
Impedance
75 ohm inputs/75 ohm outputs
3 dB frequency
7 MHz
Signal/noise
-60 dB RMS
Differential gain
± 1%
Differential phase
± 1°
Connections
Video
BNC connectors
Mechanical
Weight
1.02 kg
Dimensions
33.15 x 18.77 x 4.42 cm (incl. connectors)
Rack mount
1 U vertical rack space; 3/4 horizontal rack space
Material
Aluminum
Finish
Dark gray powder coat
Ordering Information
KTS-216U
Sequential switcher, 16 position, looping.
E
E
E
E
E
E
E
E
E
E
Sixteen video channels
Second monitor output (optional)
Sixteen looping connectors
Programmable sequence tours
Audio follow
Alarm programming
External trigger port
Auxiliary port
Rack-mountable
NTSC or PAL
Video switchers
Page : 146
KTS-250U
2 Channel distribution amplifier
The KTS-250U is a desktop distribution amplifier that buffers and
distributes video signals to multiple outputs. Users can set the product
to operate as a 1x8 amplifier or two 1x4 amplifiers. All outputs are
designed to drive a 75 ohm load.
The KTS-250U is compatible with colour or monochrome, NTSC or PAL
video. All video connections are made via BNC connectors.
Specifications
Electrical
Input voltage
12 VAC/15 VDC. Universal adaptor 110 - 230 VAC to
15 VDC supplied
0.8 W
Input power
Video
Input
Composite video, 1 V pk-pk
Outputs
Composite video, 1 V pk-pk
Impedance
75 ohm, inputs and outputs
Bandwidth
16 MHz
Signal-to-noise ratio
-75 dB RMS typical
Crosstalk
-85 dB typical
Gain (into a 75 ohm load)
0 dB ± 0.5 dB typical
Differential gain
0.5% typical
Differential phase
0.5° typical
Connections
Video
BNC connectors
Controls
Mode selector switch
Mechanical
Weight
0.41 kg
Material
Aluminum
Finish
Dark gray powder coat
Ordering Information
KTS-250U
2 Channel distribution amplifier
E
E
E
E
Operates as a 1x8 amplifier or two 1x4 amplifiers
Buffered video
BNC connectors
Dark gray finish
Video switchers
Page : 147
KTS-250-16U
16-Channel distribution amplifier
The KTS-250-16 is a video distribution amplifier that features eight
groups of input/output channels. Each group can be configured as a
single 1x8 video distribution amplifier or two 1x4 video distribution
amplifiers. This enables users to set multiple configurations from 8 to
16 inputs by up to 64 outputs. Each output provides unity gain into a
75 ohm load, ensuring that the output signal is equal to that of the
input. Unused outputs self terminate.
The KTS-250-16 is compatible with colour or monochrome, NTSC or
PAL video. All video connections are made via BNC connectors. It takes
8.89 cm (2 U) of space in a standard, 48.26 cm rack.
Specifications
Electrical
Input voltage
12 VAC/15 VDC. Adapter 110 - 230 VAC to 15 VDC
included
0.8 W
Input power
Video
Inputs
Up to 16 composite video 1 V pk-pk
Outputs
Up to 64 composite video 1 V pk-pk
Impedance
75 ohm, inputs and outputs
Bandwidth
16 MHz
Signal-to-noise ratio
-75 dB RMS typical
Crosstalk
-85 dB typical
Gain (into a 75 ohm load)
0 dB ± 0.5 dB typical
Differential gain
0.5% typical
Differential phase
0.5° typical
Connections
Power
2.1 x 5.5 mm; center-positive jack
Video
BNC connectors
Controls
Mode selector switch
Mechanical
Weight
1.23 kg
Material
Aluminum
Finish
Dark gray powder coat
Ordering Information
KTS-250-16U
16-Channel distribution amplifier
E Eight input/output groups; each configurable as a 1x8
video distribution amplifier or two 1x4 video
distribution amplifiers
E
E
E
E
E
Equal video strength for all outputs
Colour compatible
Unused outputs are self-terminating.
NTSC and PAL compatible
Only 8.89 cm (2 U) of rack space
Video switchers
Page : 148
KTS-253-16LT
16-Channel time, date, title generator
The KTS-253-16LT is a rack-mountable unit that can display the time,
date and a 22-character alphanumeric title on up to 16 video channels.
The information can be stacked or placed on one line, and can be
positioned on any of 11 rows. Text alignment options are left, right, or
center justified. The time can be displayed in a 12- or 24-hr format U.S. or European style. Each channel can have its own title.
The KTS-253-16LT's clock can derive its time from one of three sources:
its internal crystal, the input power line frequency (50 Hz or 60 Hz), or a
Global Positioning System receiver via ZDA and RMC date formats.
Because the unit outputs the time and date in an RS422 serial format,
the time and date can be superimposed on a Digiplex system's matrix
switcher outputs.
Crystal accuracy
25 ppm
Time Format
12 hr or 24 hr (selectable)
Mechanical
Weight
1.53 kg
Construction
1.3 mm aluminum
Finish
Dark gray powder coat
Options
External voltage (LT)
When 115 VAC power is not available, the KTS-253-16
can be ordered without the 115 VAC/9 VAC plug-in
wall transformer. In this case, the installer must
provide a 9 VAC or 12 VDC power source.
Ordering Information
KTS-253-16LT
16-Channel time, date, title generator
The KTS-253-16LT buffers its video outputs from its video inputs,
ensuring that the display information is placed only on the output
signals. An internal battery guarantees accurate time for up to 10,000
hours after a power failure.
Specifications
Electrical
Input voltage
9 VAC
Input power
8W
Input data
RS422
Input GPS data
RS422 compatible NMEA 0183 ver. 2.0 ($GPRMC), 4800
baud
RS422
Output data
Video
Inputs (16)
Composite video, 1 V pk-pk
Outputs (16)
Composite video, 1 V pk-pk
Format
NTSC or PAL (selectable)
Impedance
75 ohms, inputs and outputs
Bandwidth
7.4 MHz at -3 dB
Signal-to-noise ratio
-72 dB
Differential gain
0.5%
Differential phase
0.5 degree
Channel cross talk
Better than -40 dB
Connections
Video
BNC connectors
Data
Six-position removable terminal strip
Power connector
9 VAC power jack
Alphanumeric display
On-screen display
28 characters by 11 rows
Camera titles
22 characters, 1 line per channel
Title position
11 rows; aligned right, left or center justified
Time format
Hr:Min:Sec
Date format
Month/day/year, day/month/year (selectable)
Time/date position
On one line or stacked on any of 11 rows; aligned left,
right, or center justified (selectable)
10 horizontal x 14 vertical pixels
Character size
Clock
Reference
Internal crystal, 50 Hz AC line, 60 Hz AC line, external
GPS (selectable)
E Superimpose time, date and title information on up to
16 video channels
E
E
E
E
E
E
E
E
Various time, date, and title display options
Buffered video
On-screen programming menus
22-character alphanumeric titles
Internal crystal or local power line time reference
GPS/Digiplex compatible
Internal battery ensures continuous time
NTSC or PAL video format
Video switchers
Page : 149
KTS-253LT
Single channel time date title generator.
The KTS-253LT is a small desktop unit that can superimpose the time,
date and a 22-character alphanumeric title on one video channel.
The information can be stacked or placed on one line and can be
positioned on any of 11 rows. Text alignment options are left, right or
center justified. The time can be displayed in a 12- or 24-hour format U.S. or European style.
The KTS-253LT's clock can derive its time from one of three sources: its
internal crystal, the input power line frequency (50 Hz or 60 Hz), or a
Global Positioning System (GPS) receiver via ZDA and RMC date
formats. Because the unit outputs the time and date in an RS422 serial
format, the time and date can be superimposed on a Digiplex system's
matrix switcher outputs.
Crystal accuracy
25 ppm
Time format
12 hr or 24 hr (selectable)
Mechanical
Weight
0.39 kg
Construction
1.3 mm aluminum
Finish
Dark gray powder coat
Options
External voltage (LT)
When 115 VAC power is not available, the KTS-253
can be ordered without the 115 VAC/9 VAC plug-in
wall transformer. In this case, the installer must
provide a 9 VAC power source.
Ordering Information
KTS-253LT
Single channel time date title generator.
The KTS-253LT buffers its video outputs from its video inputs, ensuring
that the display information is placed only on the output signals. It is
also field-programmable through on-screen menus, which provide
easy-to-follow instructions for setup and operation. An internal battery
guarantees accurate time for up to 10,000 hrs after a power failure.
Specifications
Electrical
Input voltage
9 VAC
Input power
2W
Input data
RS422
Input GPS data
RS422 compatible NMEA 0183 ver. 2.0 sentence
($GPRMC), 4800 baud
RS422
Output data
Video
Input
Composite video, 1 V pk-pk
Output
Composite video, 1 V pk-pk
Format
NTSC or PAL (Selectable)
Impedance
75 ohms, input and output
Bandwidth
7.4 MHz at -3 dB
Signal/Noise
-72 dB
Differential gain
0.5%
Differential phase
0.5 degree
Channel cross talk
Better than -40 dB
Connections
Video
BNC connectors
Data
Six-position removable terminal strip
Power connector
9 VAC power jack
Alphanumeric display
On-screen display
28 characters by 11 rows
Camera title
22 characters, 1 line
Title position
11 rows; aligned right, left, or center justified
Time format
Hr:Min:Sec
Date format
Month/day/year, day/month/year (selectable)
Time/date position
On one line or stacked on any of 11 rows; aligned left,
right, or center justified (selectable)
10 horizontal x 14 vertical pixels
Character size
Clock
Reference
Internal crystal, 50 Hz AC line, 60 Hz AC line, external
GPS (selectable)
E Superimpose time, date and title information on one
video channel
E
E
E
E
E
E
E
E
Various time, date and title display options
Buffered video
On-screen programming menus
22-character alphanumeric title
Internal crystal or local power line time reference
Internal battery guarantees continuous time
NTSC or PAL video format
GPS/Digiplex compatible
Video switchers
Page : 150
KTS-55U
Character Generator, Universal
The KTS-55U Alphanumeric Message Generator superimposes
alphanumeric titles or messages on composite video for display on a
monitor screen. The unit features dry contact inputs allowing four
additional messages to be displayed, such as door status, alarm
condition, etc. A jumper for selecting either NTSC or PAL video is also
provided.
Specifications
Electrical
Input voltage
12 VDC. Adapter 110 - 230 VAC to 12 VDC included
Input power
2W
Video
Inputs
1
Outputs
1
Bandwidth
32 MHz at -1.5 dB, 50 MHz at -3 dB
Signal/noise
-60 dB (RMS rel. 1V pk-pk)
Gain
0 dB ± 1 dB
Impedance
75 ohm, Input and Outputs
Controls
Buttons
4 Momentary mini-keys used to enter Alphanumeric
Text
Connections
Power, RS422, dry contact
inputs
Video
9 Position removable terminal strip
BNC connectors
Mechanical
Weight
0.16 kg
Material
1.3 mm Aluminum
Finish
Clear anodized
Ordering Information
KTS-55U
Character Generator, Universal
E On screen alphanumeric display
E Dry contact inputs for displaying additional status
messages
E NTSC or PAL video
Video switchers
Page : 151
KTS-56
V-phase comparator
The KTS-56 V-phase comparator is a small, lightweight, and portable
device that makes it easy to synchronize video signal phases.
Specifications
Electrical
Power
9 V battery
Mechanical
Construction
0.112 in. plastic
Finish
Black
Weight
0.158 kg
Ordering Information
KTS-56
V-phase comparator
E
E
E
E
E
E
Synchronizes two cameras' vertical phases
Tone emitted when synchronization achieved
BNC connectors
Compact: 134.11 x 69.85 x 22.86 mm
Lightweight: 0.16 kg
Portable
VIDEO TRANSMISSION
The GE Security range of video transmitters on unshielded twisted pair (UTP) provides
an alternative way to transmit video signals.
Video Transmission
Page : 155
KTS-270
Single channel passive transceiver
The KTS-270 is a single-channel passive transceiver that is part of GE
Security’s new, integrated CCTV UTP (unshielded twisted pair)
system.
Designed to expand the capabilities of the CyberDome product line,
this passive transceiver is able to both transmit and receive real-time
colour or monochrome video up to 300 m over standard UTP
telephone wire. Maximum recommended distance for passive to
passive devices is 230 m when used with digital recorders.
Transmitting over UTP wire, rather than over traditional video cable,
provides a reliable, high-quality, flexible and expandable system that
uses less conduit space, and can be built into existing wiring
topologies.
This single-input transceiver was designed with unparalleled
interference immunity, allowing video signals to coexist in the same
wire bundle as telephone, datacom signals, and low-voltage power
circuits with no degradation in video quality. Video signals are sent
without the need to digitize or compress, and without the signal
degradation associated with these techniques.
Specifications
Video
Frequency response
DC to 5 MHz
Adjustable distance
equalization
Brightness and contrast control
Com.mode/Diff.mode
Rejection
15 KHz to 5 MHz; 60 dB typical
Impedance
Coax, female BNC - 75 ohms; UTP, Terminal Block 100 ohms
Wire type
Network wiring
One UTP per port channel
Wire gauge
24 AWG or thicker
Category type
2, 3, 4, 5 or better
Impedance
100 ± 20 ohms
DC loop resistance
52 ohms per 300 m
Differential capacitance
19 pF/ft max
Wire length (camera to
monitor)
Up to 300 m (including/coax)
Coax cable impedance
75 ohms
Power
No external power required
Environmental
Operating temperature
0 °C to + 50 °C
Humidity
0 to 95% (noncondensing)
Transient immunity
6,000 V 1.2 S x 50 S (per ANSI/IEEE 587 C62.41 B3
3,000 A 8 S X 20 S when ground screw is bonded
to earth ground)
Mechanical
Dimensions
76.2 x 39.1 x 27.9 mm excluding connectors
Weight
100 g
Material
Black ABS
Mounting
Two 4.4 mm diameter holes; 63.5 mm apart
Ordering Information
KTS-270
Single channel passive transceiver
E
E
E
E
E
E
E
E
Real-time video over unshielded twisted-pair wire
Receive or transmit up to 300 m
One video input or output
Colour or monochrome video
No power required
Interference immunity
Built-in transient protection
Compatible with NTSC, PAL, and SECAM
Video Transmission
Page : 156
KTS-271
Single channel active receiver
Mechanical
The KTS-271 is a single channel active receiver that is part of GE
Security's, integrated CCTV UTP (unshielded twisted pair) system.
Designed to expand the capabilities of the CyberDome product line,
this active receiver is able to receive real-time colour or monochrome
video up to 1000 m over standard UTP telephone wire. Receiving video
over UTP wire, rather than over traditional video cable, provides a
reliable, high-quality, flexible and expandable system that uses less
conduit space and can be built into existing wiring topologies.
KTS-271 single output receiver
Dimensions
76.2 x 39.1 x 27.9 mm excluding connectors
Weight
100 g
Material
Black ABS
Mounting
Two 4.4 mm diameter holes; 63.5 mm apart
Ordering Information
KTS-271
Single channel active receiver
This single-input receiver was designed with unparalleled interference
immunity, allowing video signals to coexist in the same wire bundle as
telephone, datacom signals, and low-voltage power circuits with no
degradation in video quality. Video signals are sent without the need to
digitize or compress and without the signal degradation associated
with these techniques.
The KTS-271 provides built-in transient protection and surge
suppression. The ability to transmit over UTP wire means that the
KTS-271 can be utilized in both new and existing installations.
The KTS-271 active receiver has been designed to work with other GE
Security transceiver and receiver components as a system and is
guaranteed to function only when paired with GE Security products.
Specifications
Video
Frequency response
DC to 5 MHz
Adjustable distance
equalization
Brightness and contrast control
Common - mode / differential 15 KHz to 5 MHz; 60 dB typical
- mode Rejection
Impedance
Coax, female BNC (75 ohms), UTP, terminal block (100
ohms)
LED Indicators
Blue
Power On
Green
Active, video present
Wire Type
Network wiring
One UTP per port channel
Wire gauge
24 AWG or thicker
Category type
2, 3, 4, 5 or better
Impedance
100 ± 20 ohms
DC loop resistance
52 ohms per 300 m
Differential capacitance
19 pF/ft max
Wire length (camera to
monitor)
Up to 1000 m (including /coax)
Coax cable impedance
75 ohms
Power
KTS-271 (transformer not
included)
24 VAC/VDC (75 mA max.)
One floating power supply may power multiple
receivers
Environmental
Operating temperature
0 °C to + 50° C
Humidity
0 to 95% (noncondensing)
Transient immunity
6,000 V 1.2 S x 50 S (per ANSI/IEEE 587 C62.41 B3
3,000 A 8 S X 20 S when ground screw is bonded
to earth ground)
E
E
E
E
E
E
E
Real-time video over unshielded twisted-pair wire
Receive video up to 1000 m
One video input
Colour or monochrome video
Interference immunity
Built-in transient protection
Compatible with NTSC, PAL, and SECAM
Video Transmission
Page : 157
KTS-273-16
16-Channel active receiver
Mechanical
The KTS-273-16 is a 16-channel passive transceiver that is part of GE
Security's, integrated CCTV UTP (unshielded twisted pair) system.
Designed to expand the capabilities of the CyberDome product line,
this active receiver is able to receive real-time colour or monochrome
video up to 1000 m over standard UTP telephone wire. Transmitting
over UTP wire, rather than over traditional video cable, provides a
reliable, high-quality, flexible and expandable system that uses less
conduit space, and can be built into existing wiring topologies.
Weight
2.2 kg
Mounting
"L" brackets, rack-mount
Ordering Information
KTS-273-16
16-Channel active receiver
This 16-input receiver was designed with unparalleled interference
immunity, allowing video signals to coexist in the same wire bundle as
telephone, datacom signals and low-voltage power circuits with no
degradation in video quality. Video signals are sent without the need to
digitize or compress and without the signal degradation associated
with these techniques.
The KTS-273-16 provides built-in transient protection and surge
suppression. The ability to transmit over UTP wire means that the
KTS-273-16 can be utilized in both new and existing installations. The
unit is housed in an attractive rack-mount enclosure using only one
unit of rack space.
The KTS-273-16 active receiver has been designed to work with other
GE Security transceiver and receiver components as a system and is
guaranteed to function only when paired with GE Security products.
Specifications
Video
Frequency response
DC to 5 MHz
Adjustable distance
equalization
Brightness and contrast control
Com.mode/diff.mode
Rejection
15 KHz to 5 MHz, 60 dB typ
Impedance
Coax, female BNC 75 ohms/UTP, terminal block 100
ohms
LED Indicators
Blue
"Power On"
Green
"Active" video present
Wire Type
Network wiring
(1) UTP per port channel
Wire gauge
24 AWG or thicker
Category type
2, 3, 4, 5 or better
Impedance
100 ± 20 ohms
DC loop resistance
52 ohms per 300 m
Differential capacitance
19 pF/ft max
Wire length (camera to
monitor)
Up to 1 km (including coax)
Coax cable impedance
75 ohms
Power
KTS-271-16 (transformer &
terminal block included)
24 VAC/VDC, 800 mA max
Environmental
Operating temperature
0 °C to +50° C
Humidity
0 to 95% (noncondensing)
Transient immunity
6,000 V 1.2 S x 50 S per ANSI/IEEE 587 C62.41 B3
3,000 A 8 S X 20 S when ground screw is bonded
to earth ground
E
E
E
E
E
E
E
Real-time video over unshielded twisted-pair
Receive or transmit up to 1000 m
16 video inputs
Interference immunity
Built-in transient protection
Compatible with NTSC, PAL, and SECAM
Rack-mountable
Video Transmission
Page : 158
GE-TTP111VS
1 Channel passive video transceiver
The GE-TTP111VS video transceiver is a passive (non-amplified) device
that allows transmission of real-time monochrome or colour video over
Unshielded Twisted-Pair (UTP) telephone wire. 1V pk-pk composite
signals are supported at distances of up to 400 meters (Further, when
used with an active receiver).
Specifications
Video Input
BNC Connector
Video Level
1 Volt Pk-Pk
Transmission distance
Minimum cable requirement
400 meters Passive-Passive, 800 meters
Passive-Active
CAT 5 (or above)
Dimensions
69x18x22mm
Ordering Information
GE-TTP111VS
1 Channel passive video transceiver
E Slimline design for easy connection to multiplexers and
matrix
E BNC male to quick connect terminal block
E Transmit a full motion color or monochrome video
signal up to 400 meters
E Distance up to 800 meters when used with an active
receiver
E Passive, no power required
E Built-in impedance couple device and noise filter for
exceptional interference immunity
Video Transmission
Page : 159
GE-TTP111VT
1 Channel passive video transceiver
The GE-TTP111VT video transceiver is a passive (non-amplified) device
that allows transmission of real-time monochrome or colour video over
Unshielded Twisted-Pair (UTP) telephone wire. 1V pk-pk composite
signals are supported at distances of up to 400 meters (Further, when
used with an active receiver).
Specifications
Video Input
BNC Connector
Video Level
1 Volt Pk-Pk
Transmission distance
1200 meters (Use with GE active receivers only)
Minimum cable requirement
CAT 5 (or above)
Dimensions
70x42x45mm
Power
12Vdc (power supply included)
Ordering Information
GE-TTP111VT
1 Channel passive video transceiver
E BNC male to quick connect terminal block
E Transmit a full motion colour or monochrome video
signal up to 1200 meters when used with a GE
approved active receiver
E Built-in impedance couple device and noise filter for
exceptional interference immunity
Video Transmission
Page : 160
GE-TTP111VL
1 Channel Passive Video Transceiver
The General Electric Model GE-TTP111VL Video Transceiver is a passive
(non-amplified) device that allows transmission of real-time
monochrome or color video over Unshielded Twisted-Pair (UTP)
telephone wire. 1V pk-pk composite signals are supported at distances
of up to 400 meters (Further, when used with an active receiver).
Specifications
Video Input
BNC Connector
Video Level
1 Volt Pk-Pk
Transmission distance
Minimum cable requirement
400 meters Passive-Passive, 800 meters
Passive-Active
CAT 5 (or above)
Dimensions
69x25x22mm
Ordering Information
GE-TTP111VL
1 Channel Passive Video Transceiver
E BNC male to quick connect terminal Block
E Transmit a full motion color or monochrome video
signal up to 400 meters
E Distance up to 800 meters when used with an active
receiver
E Passive, no power required
E Built in impedance couple device and noise filter for
exceptional interference immunity
E IP65 rated
Video Transmission
Page : 161
GE-TTP414V
4 Channel passive video transceiver
The GE-TTP414V video transceiver is a 4 channel passive
(non-amplified) device that allows transmission of real-time
monochrome or colour video over Unshielded Twisted-Pair (UTP)
telephone wire. 1V pk-pk composite signals are supported at distances
of up to 400 meters (Further, when used with an active receiver).
Specifications
Video Input/Output
4x BNC Connector
Video Level
1 Volt Pk-Pk
Transmission distance
Minimum cable requirement
400 meters Passive-Passive, 800 meters
Passive-Active
CAT 5 (or above)
Dimensions
80x110x25mm
Ordering Information
GE-TTP414V
4 Channel passive video transceiver
E BNC male to quick connect terminal block
E Transmit a full motion colour or monochrome video
signal up to 400 meters
E Distance up to 800 meters when used with an active
receiver
E Passive, no power required
E Built-in impedance couple device and noise filter for
exceptional interference immunity
Video Transmission
Page : 162
GE-TTA111VT
1 Channel active video transmitter
The GE-TTP111VT video transceiver is a passive (non-amplified) device
that allows transmission of real-time monochrome or colour video over
Unshielded Twisted-Pair (UTP) telephone wire. 1V pk-pk composite
signals are supported at distances of up to 400 meters (Further, when
used with an active receiver).
Specifications
Video Input
BNC Connector
Video Level
1 Volt Pk-Pk
Transmission distance
1200 meters (Use with GE active receivers only)
Minimum cable requirement
CAT 5 (or above)
Dimensions
70x42x45mm
Power
12Vdc (power supply included)
Ordering Information
GE-TTA111VT
GE-TTA111VR
1 Channel active video transmitter
1 channel active video receiver
E BNC male to quick connect terminal block
E Transmit a full motion colour or monochrome video
signal up to 1200 meters when used with a GE
approved active receiver
E Built-in impedance couple device and noise filter for
exceptional interference immunity
GE-TTA111VR
1 channel active video receiver (power adapter included)
The GE-TTA111VR video receiver is an active (12Vdc powered) device
that allows transmission of real-time monochrome or colour video over
Unshielded Twisted-Pair (UTP) telephone wire. 1V pk-pk composite
signals are supported at distances of up to 800 meters when used with
stand alone Passive transmitters, CamPlus PlusPacks or CyberDome or
up to 1200 meters when used with it's matched Active transmitter
(GE-TTA111VT).
Specifications
Video Input
BNC Connector
Video Level
1 Volt Pk-Pk
Transmission distance
Minimum cable requirement
800 meters Passive TX - Active RX, 1200 meters
Active TX - Active RX
CAT 5 (or above)
Dimensions
70x42x45mm
Power
12Vdc (power supply included)
Ordering Information
E BNC male to quick connect terminal block
E Transmit a full motion colour or monochrome video
signal up to 1200 meters (Active-Active)
GE-TTA111VR
GE-TTA111VT
1 channel active video receiver
1 Channel active video transmitter
E Compatible with all GE Active/Passive transmitters
including CamPlus PlusPacks and CyberDome
E Built-in impedance couple device and noise filter for
exceptional interference immunity
Video Transmission
Page : 163
GE-TTA414VR
4 channel active video receiver
The GE-TTA111VR video receiver is an active 4 channel (12Vdc
powered) device that allows transmission of real-time monochrome or
colour video over Unshielded Twisted-Pair (UTP) telephone wire. 1V
pk-pk composite signals are supported at distances of up to 800
meters when used with stand alone passive transmitters, CamPlus
PlusPacks or CyberDome or up to 1200 meters when used with it's
matched active transmitter (GE-TTA111VT).
Specifications
Video output
4x BNC Connector
Video Level
1 Volt Pk-Pk
Transmission distance
Minimum cable requirement
800 meters Passive TX - Active RX, 1200 meters Active
TX - Active RX
CAT 5 (or above)
Dimensions
80x140x80mm
Power
12Vdc (power supply included)
Ordering Information
GE-TTA414VR
GE-TTA111VT
4 channel active video receiver
1 Channel active video transmitter
E 4 channel active receiver
E 4x BNC male to quick connect terminal block
E Transmit a full motion colour or monochrome video
signal up to 1200 meters (Active-Active)
E Compatible with all GE active/passive transmitters
including CamPlus PlusPacks and CyberDome
E Built-in impedance couple device and noise filter for
exceptional interference immunity
Video Transmission
Page : 164
GE-TTA111V
1 Channel Active Video Receiver kit
The General Electric Model GE-TTA111V Video Transmitter and
Receiver kit is an Active (12Vdc powered) pair of matched devices that
allow transmission of real-time monochrome or color video over
Unshielded Twisted-Pair (UTP) telephone wire. 1V pk-pk composite
signals are supported at distances of up to 1200 meters when used
with CAT5 cable (or higher).
Specifications
Video Input
BNC Connector
Video Level
1 Volt Pk-Pk
Transmission distance
1200 meters Active TX - Active RX
Minimum cable requirement
CAT 5 (or above)
Dimensions
70x42x45mm
Power
12Vdc (power supply included)
Ordering Information
GE-TTA111V
1 Channel Active Video Receiver kit
E Converts any standard camera or dome video signal to
UTP
E Transmit a full motion color or monochrome video
signal up to 1200 meters (Active-Active)
E BNC male to quick connect terminal Block
E Built in impedance couple device and noise filter for
exceptional interference immunity
Video Transmission
Page : 165
GE-TPP016
16 channel passive video transceiver
The GE-TPP016 video transceiver is a 16 channel passive
(non-amplified) device that allows transmission of real-time
monochrome or colour video over Unshielded Twisted-Pair (UTP)
telephone wire. 1V pk-pk composite signals are supported at distances
of up to 400 meters (Further, when used with an active receiver).
Specifications
Video Input/Output
16x BNC Connector
Video Level
1 Volt Pk-Pk
Transmission distance
Minimum cable requirement
400 meters Passive-Passive, 800 meters
Passive-Active
CAT 5 (or above)
Dimensions
190x483x44mm
Ordering Information
GE-TPP016
16 channel passive video transceiver
E Compatible with all GE active/passive transmitters
including CamPlus PlusPacks and CyberDome
E BNC male to quick connect terminal block
E Transmit a full motion colour or monochrome video
signal up to 400 meters
E Distance up to 800 meters when used with an active
receiver
E Passive, no power required
E Built-in impedance couple device and noise filter for
exceptional interference immunity
Video Transmission
Page : 166
GE-TPA008
8 channel active video receiver
The GE-TPA008 video receiver is an active 8 channel (12Vdc powered)
device that allows transmission of real-time monochrome or colour
video over Unshielded Twisted-Pair (UTP) telephone wire. 1V pk-pk
composite signals are supported at distances of up to 800 meters
when used with stand alone Passive transmitters, CamPlus PlusPacks
or CyberDome or up to 1200 meters when used with it's matched
active transmitter (GE-TTA111VT).
Specifications
Video output
8x BNC Connector
Video Level
1 Volt Pk-Pk
Transmission distance
Minimum cable requirement
800 meters Passive TX - Active RX, 1200 meters Active
TX - Active RX
CAT 5 (or above)
Dimensions
190x483x44mm
Power
12Vdc (power supply included)
Ordering Information
GE-TPA008
8 channel active video receiver
E 8 channel active receiver
E 8x BNC male to quick connect terminal block
E Receive a full motion colour or monochrome video
signal up to 1200 meters (Active-Active)
E Compatible with all GE Active/Passive transmitters
including CamPlus PlusPacks and CyberDome
E Built-in impedance couple device and noise filter for
exceptional interference immunity
Video Transmission
Page : 167
GE-TPA016
16 channel active video receiver
The GE-TPA016 video receiver is an active 16 channel (12Vdc
powered) device that allows transmission of real-time monochrome or
colour video over Unshielded Twisted-Pair (UTP) telephone wire. 1V
pk-pk composite signals are supported at distances of up to 800
meters when used with stand alone Passive transmitters, CamPlus
PlusPacks or CyberDome or up to 1200 meters when used with it's
matched active transmitter (GE-TTA111VT).
Specifications
Video output
16x BNC Connector
Video Level
1 Volt Pk-Pk
Transmission distance
Minimum cable requirement
800 meters Passive TX - Active RX, 1200 meters Active
TX - Active RX
CAT 5 (or above)
Dimensions
190x483x44mm
Power
12Vdc (power supply included)
Ordering Information
GE-TPA016
16 channel active video receiver
E 16 channel active receiver
E 16x BNC male to quick connect terminal block
E Receive a full motion colour or monochrome video
signal up to 1200 meters (Active-Active)
E Compatible with all GE active/passive transmitters
including CamPlus PlusPacks and CyberDome
E Built-in impedance couple device and noise filter for
exceptional interference immunity
Video Transmission
Page : 168
Coaxial video ground loop isolator
Ordering Information
GE-GL001
Coaxial video ground loop isolator
GE-GL001
Content
Specialist Cameras
TIR-300
TIR-400
TIR-600
CW-320
CW-720DN
PD-43VC
PD-44C
VR4-310
VR4-320
VCM-300
VCM-600
VCM-700V
BC-600
CL-600
JB-650/P
PI-340
PI-390/P
PI-610VR
SD-600
SD-600/P
ARD-682P
ARD2-682P
330 TVL Day/Night, IP65, Built-In LED's 3.6 mm Lens
Page : 5
Colour, 330 TVL Day/Night, IP68, Built-In LED Illuminators 4 mm Lens
Page : 6
Colour, 330 TVL Day/Night, IP68, Built-In LED Illuminators 6 mm Lens
Page : 7
IP65 Indoor Mini Wedge 380 TVL Mono Camera 4 mm lens
Page : 8
IP65 Indoor Mini Wedge 450 TVL Colour to Mono Day/Night Camera
Page : 9
1/3'' Colour 460 TVL 2.0 Lux Varifocal 3.5-8 mm lens 12 VDC
Page : 10
1/3'' Colour 480 TVL 2.0 Lux Fixed 4.0 mm Lens 12 VDC
Page : 11
IP65 Vandal Resistant Ceiling mount 1/3" Mono 380 TVL Fixed 4 mm lens
Page : 12
IP65 Vandal Resistant Corner mount 1/3" Mono 380 TVL Fixed 4 mm lens
Page : 13
Indoor Vandal Resistant 380 TVL 4 mm Mono Corner Mount Camera
Page : 14
Indoor Vandal Resistant 330 TVL 4 mm Colour Corner Mount Camera
Page : 15
Indoor Vandal Resistant 450 TVL Varifocal Colour Corner
Page : 16
Ball Camera, Colour, 330 TVL, 4 mm lens
Page : 17
Clock Camera Colour, 1/3", 330 TVL, 3.6 mm PH Lens
Page : 18
Junction Box Camera Colour, 330 TVL, 3.6 mm PH Lens
Page : 19
Sharpshooter standard resolution monochrome PIR case camera
Page : 20
Indoor standard resolution monochrome PIR case camera
Page : 21
IP65 vandal-resistant PIR Camera Colour, 330 TVL, 4 mm lens
Page : 22
Side viewing Smoke Detector Camera Colour, 330 TVL, 4 mm Lens
Page : 23
Vertical viewing Smoke Detector Camera Colour, 330 TVL, 3.6 mm PH Lens
Page : 24
1/4"Rugged hi-res colour dome 2.8-5.8mm A/I Varifocal Lens,12 VDC or 24 VAC
Page : 25
1/3"Rugged 480 TVL Colour Dome 3.5-8 mm A/I Varifocal Lens,12 VDC or 24 VAC
Page : 26
1/3" 420 TVL, 0.1 lux mono camera, 85 to 264 VAC
Page : 29
1/3" 450 TVL, 0.1 Lux (F1.2) Mono st-res Digital Camera, 12 VDC or 24 VAC
Page : 30
1/3" 600 TVL, 0.1 lux (F1.2) Mono hi-res Digital Camera, 12 VDC or 24 VAC
Page : 31
1/3" 600 TVL,0.01 lux(F1.2) Mono ExView IR Digital Camera,12 VDC or 24 VAC
Page : 32
1/3" 380 TVL, 0.5 lux (F1.2) Colour Digital Camera, 12 VDC or 24 VAC
Page : 33
1/3" 480 TVL, 0.5 lux (F1.2) Colour hi-res Digital Camera, 12 VDC or 24 VAC
Page : 34
1/3" 480 TVL, 0.1 lux (F1.2) ExView Digital Colour Camera, 12 VDC or 24 VAC
Page : 35
1/3"480TVL, 0.3 lux(F1.2) I.R Sensitive Col Digital Camera,12 VDC or 24 VAC
Page : 36
1/3'' 480TVL 0.1/0.01 Lux ExView Day/Night Camera, 12 VDC or 24 VAC
Page : 37
PlusPack Unshielded twisted pair camera module
Page : 38
UltraView, High Resolution, Wide Dynamic Range Camera
Page : 39
15" TFT Flatscreen CCTV monitor
Page : 43
17" TFT Flatscreen CCTV monitor
Page : 44
19" TFT Flatscreen CCTV monitor
Page : 45
6-inch, CyberDome Day/Night, flush mount,clear, colour/monochrome
Page : 49
Professional Cameras
AR-163C
KTC-510P
KTC-515P
KTC-540EP
KTC-810CP
KTC-815CP
KTC-840CEP
KTC-910P
KTC-2000DNP
Video Transmission
KTCB-UTP
Professional Cameras
KTC-XP1
Monitors
LV-15W
LV-17W
LV-19W
Cyberdome
KTA-F3-D2C
KTA-F3-H2C
KTA-H3-D2C
KTA-H3-H2C
KTA-RE3-D2C
KTA-RE3-H2C
KTA-RE8-D2C
KTA-RE8-H2C
KTA-DE8-D2C
KTA-DE8-H2C
KTA-20
KTA-20C
KTA-20T
KTA-25
KTA-26
KTA-27
KTA-28
KTA-30
ATA-CM1
6-inch, CyberDome Select, flush mount,clear, colour
Page : 50
7-inch, CyberDome Day/Night, pendant mount, clear, colour/monochrome
Page : 51
7-inch, CyberDome Select, pendant mount,clear, colour
Page : 52
7-inch, IP65 Rugged Dome Day/Night, pendant mount, clear, colour/monochrome
Page : 53
7-inch, IP65 Rugged Dome Select, pendant mount,clear, colour
Page : 54
7-inch, IP65 Rugged Dome Day/Night, pendant mount, clear, colour/monochrome
Page : 55
7-inch, IP65 Rugged Dome Select, pendant mount,clear polycarbonate, colour
Page : 56
8-inch, Heavy Duty CyberDome Day/Night, clear, colour/monochrome
Page : 57
8-inch, Heavy Duty CyberDome Select, clear, colour
Page : 58
CyberMount wall-arm
Page : 59
CyberMount wall-arm
Page : 59
Cybermount with UTP Interface Connector Card
Page : 60
Corner Mount Adapter for KTA-20 or KTA-28 CyberDome wall bracket
Page : 60
Pole-mount adapter
Page : 61
Roof-mount adapter
Page : 61
Cast aluminum wall-Arm
Page : 62
Gooseneck wall mount bracket
Page : 62
Pendant ceiling mount bracket, 0.3 m, 1.25 NPT thread
Page : 63
Power supply unit for all domes, 24 VAC, 3 Amps
Page : 64
CyberScout PAL with clear dome and 4 mm lens
Page : 65
CyberScout, PAL with clear dome and 3.5-8 mm varifocal lens
Page : 66
CyberScout PAL with smoked dome and 4 mm lens
Page : 67
CyberScout, PAL with smoked dome and 3.5-8mm Varifocal Lens
Page : 68
CyberScout pendant mount hood
Page : 69
Cyberscout pole-mount adapter
Page : 69
CyberScout corner-mount Adaptor
Page : 70
Universal multi-speed Digiplex system control
Page : 73
Variable speed controller keypad with audio amplifier
Page : 74
Variable speed controller keypad
Page : 75
VideoIQ system with LCD monitor
Page : 79
VideoIQ system
Page : 80
16-camera colour simplex video multiplexer
Page : 83
10-Camera monochrome duplex multiplexer
Page : 84
10-Camera eZ series duplex multiplexer
Page : 85
10-Camera eZ series monochrome duplex multiplexer
Page : 86
16-camera colour duplex multiplexer
Page : 87
10-Camera colour triplex video multiplexer
Page : 88
Cyberdome accessories
ATD-6812-PSU
Cyberdome
KTA-38-C4P
KTA-38-CVP
KTA-38-S4P
KTA-38-SVP
KTA-PH-38
KTA-PM-38
KTA-CM-38
Controller Keypad
KTD-400U
KTD-405AU
KTD-405U
VideoIQ
VIQ-8HD
VIQ-8HDX
Multiplexers
CBR-16CSX
CBR-10MDX
CBR-10EZX
CBR-10MEZX
CBR-16EZX
CBR-10CDTX
CBR-16CDTX
CBR-16MDTX
16-Camera colour triplex video multiplexer
Page : 89
16-camera mono triplex video multiplexer, PAL
Page : 90
1 Ch Digital video recorder, Compact Flash, without hard disk drive
Page : 93
1 Ch digital video recorder, Compact Flash, with 80 Gb hard disk drive
Page : 94
Empty hard disk drive caddy for use with VDR
Page : 95
Single channel digital recorder, NTCS/PAL, Ethernet
Page : 96
StoreSafe
Page : 97
StoreSafe Pro
Page : 98
DVMRE-CT
Page : 99
16-Camera Triplex 16x5 DVMR Matrix, 1000 Gb, NTSC/PAL, Ethernet, Audio
Page : 100
DVMRe Pro
Page : 101
DVSE digital video storage chassis only 110/220 V, SCSI Cable Included
Page : 102
Probridge 3, ATM
Page : 103
Probridge 3, ATM
Page : 104
Digiplex 4 matrix, 64 inputs x 4 outputs,expandable to 512 x 64
Page : 107
Master switcher chassis - accepts up to 64 inputs x 32 outputs
Page : 108
Gathering panel - video signal manager
Page : 109
Monitor Expansion Chassis - Expands System by 32 Monitor Output
Page : 110
Slave Chassis, Additional 64 Video Inputs per Chassis (previously KT)
Page : 111
Expansion Chassis - Accepts Inputs from KTD-440 for Monitors 33-64
Page : 112
Video input card 64x16 video crosspoint switch
Page : 113
Monitor output card, controls 4 monitor outputs
Page : 113
Video loss card
Page : 114
Digiplex 4 power supply
Page : 114
Master switcher control card, CPU card
Page : 115
16 x 4 Matrix switcher
Page : 116
32x4 Matrix switcher
Page : 117
32x8 Matrix switcher
Page : 118
Relay Follower Card, 64x1 Relay Output
Page : 119
Relay follower chassis - accepts one KTD-350
Page : 120
16 Input Alarm Module, PSU Included
Page : 121
Alarm input module
Page : 122
Alarm input chassis
Page : 123
RS422 data signal distributor-provides six separate RS422 outputs
Page : 127
RS422 data signal distributor - provides 16 separate RS422 outputs
Page : 128
DTMF signal merger, 6 signals merged and amplified to 1 common output
Page : 129
RS422 / RS232 converter (selectable)
Page : 130
RS232/RS422 interface unit
Page : 131
Code converter
Page : 132
Digital recorder
VDR-0-CF
VDR-80-CF
VDR-HDD-0
DSR-2000E
StoreSafe
StoreSafe Pro
DVMRE-CT
DVMRE-16CTM-1TA
DVMRe Pro
DVSE
Interfaces
CBR-PB3-ATM
CBR-PB3X-POS-RP
Digiplex
KTD-4M-64x4
KTD-440
KTD-440G
KTD-440N
KTD-441-1
KTD-442
KTD-443
KTD-444
KTD-445
KTD-446
KTD-447
KTD-348-164U
KTD-348-324U
KTD-348-328U
KTD-350
KTD-352
Interfaces
KTD-415U
KTD-460U
KTD-463U
KTD-83U
KTD-83-16U
KTD-86
KTD-87E4
KTD-312U
KTD-313U
KTD-314
KTD-314-1U
KTD-410U
KTD-93U
Digiplex code converter
Page : 133
Coaxitron Interface Unit, Universal
Page : 134
Protocol converter
Page : 135
Auxiliary device driver
Page : 136
PTZ receiver 24 VAC, 230 VAC power
Page : 137
PTZ receiver 24 VAC with preset, 230 VAC power
Page : 138
Light duty PTZ receiver 24 VAC
Page : 139
Light duty PTZ receiver 24 VAC
Page : 140
Sequential switcher, 4 position, looping.
Page : 143
Sequential Switcher, 10 Position, Looping.
Page : 144
Sequential switcher, 16 position, looping.
Page : 145
2 Channel distribution amplifier
Page : 146
16-Channel distribution amplifier
Page : 147
16-Channel time, date, title generator
Page : 148
Single channel time date title generator.
Page : 149
Character Generator, Universal
Page : 150
V-phase comparator
Page : 151
Single channel passive transceiver
Page : 155
Single channel active receiver
Page : 156
16-Channel active receiver
Page : 157
1 Channel passive video transceiver
Page : 158
1 Channel passive video transceiver
Page : 159
1 Channel Passive Video Transceiver
Page : 160
4 Channel passive video transceiver
Page : 161
1 Channel active video transmitter
Page : 162
1 channel active video receiver
Page : 162
4 channel active video receiver
Page : 163
1 Channel Active Video Receiver kit
Page : 164
16 channel passive video transceiver
Page : 165
8 channel active video receiver
Page : 166
16 channel active video receiver
Page : 167
Coaxial video ground loop isolator
Page : 168
Receivers
KTD-125-24E4
KTD-125P-24E4
KTD-127
KTD-128P
Video switchers
KTS-204U
KTS-210U
KTS-216U
KTS-250U
KTS-250-16U
KTS-253-16LT
KTS-253LT
KTS-55U
KTS-56
Video Transmission
KTS-270
KTS-271
KTS-273-16
GE-TTP111VS
GE-TTP111VT
GE-TTP111VL
GE-TTP414V
GE-TTA111VT
GE-TTA111VR
GE-TTA414VR
GE-TTA111V
GE-TPP016
GE-TPA008
GE-TPA016
GE-GL001
2:51 PM
Page 1
GE
Security
CCTV catalogue
1/31/2005
GE Security
CoverCCTV.qxd
CCTV CATALOGUE
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising