Hiltron products - HILTRON Communications
Hiltron products
Shortform catalogue
Company Overview
Hiltron Communications headquarters
Hiltron Communications operates from modern
purpose-built headquarters based in Backnang near
Stuttgart. On-site facilities include a purposedesigned integration area for ground systems, large
antenna solutions and SNG vehicles. We also have
our own satellite antenna test range.
Customers can rely on our specialist knowledge of
the various products available on the market.
We invite you to contact us if you have technical
questions or if you require support in the design and
selection of equipment.
Hiltron offers a wide range of customer-focused
services, covering every aspect of the modern
satellite communication business.
2
Facts about Hiltron:
Founded 1979
Located in Backnang, Germany
20 employees, primarily engineers
and technicians
Have our own R&D department
Member of Dan Technology
Group since 2011
HMAM - Hiltron Motorised Antenna Mount
High Speed three Axis Antenna Mount
High precision satellite antenna positioner for use in
professional satellite communication systems.
Combining affordability with the reliability and
precision expected from professional-grade
communications equipment.
Features
All kinds of reflectors with a diameter
between 1.2 and 2.7 meters can be
attached.
IP-based control from a PC running a
graphical user interface compatible with
standard web browsers.
Three axis motorized system with >180
degrees of continuous azimuth adjustment.
Integrated database for potentially accessible satellites.
90 degrees of elevation adjustment range.
Fully adjustable polarization.
Positioning accuracy is up to
+/- 0.02° (depending on temperature and
wind load).
Ethernet interface and control via SNMP
for M&C.
The ACU and the associated
motor-control electronics are
contained in an weatherproof outdoor
housing.
HMFC - Hiltron Movable Dual Feed Control
for Hiltron Motorized Satellite Antenna Mount
The Hiltron HMFC is a high quality motorized dual feed
system, mounted on a movable tray table.
The system always provides optimal antenna gain by
positioning the selected feed system to the focal point
of the corresponding frequency band.
Features
Sequential measurement of different
frequency bands depending only on the
feed.
IP-based control from a PC running a
graphical user interface compatible with
standard web browsers.
Automatic change of the operational feed.
Integrated database for potentially accessible satellites.
Speed to change the feeds below 20 sec.
Positioning accuracy of the antenna
is up to +/- 0.02° (depending on
temperature and wind load).
Ethernet interface and control via SNMP
for M&C.
The ACU and the associated motor
control electronics are contained in a
weatherproof outdoor housing.
3
HACU - Hiltron Antenna Control Unit
for Positioning and Inclined Orbit Tracking
High precision satellite antenna control unit for use in
professional satellite communication systems.
Features
Antenna Control Unit for positioning of up
to four axis motorized antenna systems.
Fast positioning with three different
speed steps.
All axis can be controlled and moved
simultaneously.
Ethernet interface for monitoring and
control via SNMP.
IP-based control from a PC running a
graphical user interface compatible with
standard web browsers.
Serial interface for extensions, e.g. wind
sensor.
Integrated database for storage of potentially accessible satellite
para­meters.
The ACU and the associated
­motor-control electronics are
contained in a weatherproofed
outdoor housing.
Options
Extension to a satellite tracking s­ ystem.
Inclined orbit tracking.
Interface for 17 bit optical SSI
en­coders.
Handheld control unit for manual pointing.
Integral control of third party beacon
receivers.
HCS - Hiltron Universal Control Unit
Flexible fully modular controller
Universal Ultra Flexible fully modular Controller (2 RU)
for monitoring, control, supply and redundancy
switching in different control applications for
Satellite Earth Station Equipment.
Features
Monitoring and power supply for
fiberoptic modules.
Controller for N:1 redundancy HPA
switching.
Controller for N:1 redundancy
switching.
Controller for redundancy systems for
DVB MPEG encoders/modulators/IRDs
and other applications.
Monitoring and power supply for
LNA/BDC/LNB/BUC.
All modules hot swappable. Options
It is possible to supply a reduced cost
version without the LCD display. In this
case, only remote control is available.
4
Monitoring of status messages.
Integration of serial controlled
equipment into IP world.
19”/2U chassis.
Redundant power supply.
Web based user friendly operator
interface (Web Interface HTTP).
Control via SNMP for M&C.
Serial Interface for extension.
HDCU - Hiltron De-icing Control Unit
Web-based Antenna De-icing System
Combined De-icing sensor and dish heating system for
direct control of small to medium satellite antennas.
Features
230 V single phase or 400V three phase
supply.
Max. current per segment (phase)
20 A.
Three dedicated circuits for heater control
to connect up to three pads per circuit.
Processor controlled de-icing with four
sensors.
One additional circuit for feed or sub-reflector heater control (230 VAC).
Ethernet interface for M&C.
One circuit for feed heater control
(24 VDC).
Web based user friendly operator
interface.
Control via SNMP.
Heater current control and protection.
Options
Logical control inputs and outputs for
manual remote operation.
HDCU-E - Hiltron De-Icing Control Unit
Web-based Antenna De-Icing System (extended)
A combined de-icing sensor and dish
heating system for direct control of big
satellite antenna dishes to cover the
required high power demand with
electric power consumption up to 200
kW for higher numbers of heater panels.
Features
3-phase supply operation with 400 VAC.
Three individual circuits (phases) for
heater control to connect up to three
pads per circuit.
With four additional heater groups each
consisting of 3 heater arrays with 3
heater circuits each. In total
36 heater circuits (pads or pads groups)
can be controlled.
One individual circuit for feed heater
control (240 VAC).
Processor controlled de-icing with four
sensors.
The permitted current for each heater
circuit is max. 20 A
(45 circuits max.).
Ethernet interface for M&C
Heater current control and protection.
Web based user friendly operator
interface.
Control via SNMP.
Controlled switch-on and switch-off of
individual heater pads.
Options
Optional logical control in- and outputs
for manual remote operation.
5
HMCS-MCR - Monitoring & Control System
Unique Solution for Master Control Room
HMCS-MCR is a modular and scalable package of our universal
M&C System. It is designed to control all relevant Satellite equipment in your MCR, optimized for occasional use applications.
The application is focused on providing user friendly control of
different equipment for operators in Master Control Rooms.
Features
All relevant information at one glance.
Management of different Encoder,
Modulator and HPAs.
Interfaces to higher-level systems (SNMP,
XML).
Management of Tx and Rx chains
including redundancy switching.
Uniform management of different
equipment same type (e.g. receivers
with different versions).
Selection and storage of different
satellite parameters (satellite position,
beacon frequency, transponder/slots etc.)
database supported.
Database supported profiles for
sate­llite reception (IRD settings).
Database supported profiles for sate­llite
transmission (Modulator, E­ ncoder, HPA
settings).
Plausibility check and control (in case of
wrong parameter settings).
Selection of different sources via matrix.
Management of motorized and fixed
antennas.
Logging of all processes, alarms, events.
Logging of parameter and status data
and graphical presentation.
Customization.
Platform-independent client / server
system.
Hiltron Premium Line D-SNG Platform
Comprehensive Satellite Communication System
The Hiltron DSNG platform integrates the complete SatCom
equipment including third party equipment (e.g. Encoder
Modulators and IRD’s) in a unified database control system.
The System provides Reliability, flexibility as well
as a quick, intuitive and fail safe control system.
Features
Robust and reliable cable drive mounts
(maintenance free).
230V/12V dual power supply for
antenna drive.
Dual axis compensation of vehicle
tilt and inclination.
Rotary Joints for all axis.
3-axis Hiltron SNG antenna controller.
+/- 200° Azimuth range.
GPS locked-Auto Acquisition.
Front Panel control and Web
Interface.
Hiltron designed waveguide system.
Integrated DVB-S/S2 receiver SAT ID via NIT tables.
Hiltron M&C System, features see
HMCS-MCR above.
Options
Three different Antenna sizes
(1.45m / 1.8m / 2.4m).
2, 3 or 4-port feed system.
Spectrum Analyzer (1HU) fully integrated
in M&C system.
6
Three HPA configurations
– Single Thread
– 1:1 Redundancy
– Phase Combined
SSPA up to 250W
TWTA up to 750W
Customization to Your special
requirements.
Hiltron Communications
HILTRON Communications is a leading German System Integrator, Manufacturer and Distributor in the
field of satellite and wireless communication.
Our customers can rely on our profound knowledge of the various products available on the market.
We expressly invite you to contact us if you have technical questions or if you require consultancy for a
proper equipment selection.
HILTRON as System Integrator
With our team of qualified satcom engineers we are in a position to implement complex turnkey
systems:
– DVB-S/S2 Satellite Uplink Stations for TV, Radio and Data Transmission
– VSAT Systems
– TVRO Systems for Cable Headends or for Terrestrial Retransmission
– Fixed and Mobile Microwave Links for Broadcasting
– DSNG Systems
– Fibre Optic Systems in the L- and IF-Band
– DVB-T/T2 Encoding & Multiplexing Headends
– ATM/SDH/PDH/IP Transport Networks
– IPTV Headends (receive part)
HILTRON as Manufacturer
This catalogue gives a first impression about the wide range of own manufactured products that we
can implement in order to add value to the systems.
HILTRON as Distributor
As business partner of world class manufacturers we are able to supply most of the components,
devices and subsystems required for a satellite communication system.
HILTRON as Service Provider
Hiltron offers a broad range of project management skills including turnkey system responsibility.
Together with its partner companies, Hiltron is able to offer additional services such a spare parts
management, 24/7 on-site or on-line support, and factory or on-site training.
7
HILTRON GmbH
Emil-Rathenau-Str. 1
D-71522 Backnang
GERMANY
Tel: +49-7191-343570
Email: [email protected]
www.hiltron.de
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement