Untitled
Features,
Performance,
Value
For the Everyday
PMR User
The IC-F5022 series is ideal for small-to-mid sized systems for public safety, large industry to light commercial users.
The IC-F5022 series offers multiple signaling, advanced scanning, improved external channel control
capability and wide frequency coverage packed in a
compact body. This rugged mobile easily exceeds your
expectations with its reliable performance and communication quality.
25W
25W
128 memory channels
Radio kill, stun and revive
Optional internal units
128 channels (Max.) separated into 8
memory zones. Memory channels can be
identified with the 8-character channel
name and selected easily with the
up/down buttons.
The radio kill/stun functions disable a lost
or stolen radio over the air, eliminating security threats from undesired listeners.
When the stun command is received, all
functions will be temporary locked out
until the revive command is received or
the unlock password is entered.
The IC-F5022 series has a 40-pin option
slot for adding an optional internal unit.
Optional voice scrambler units, UT-109R
or UT-110R provide secure private conversation. Optional DTMF decoder unit,
UT-108R offers DTMF decode capability.
Lone worker function
Front mounted speaker
4 watts (typ.) front mounted speaker delivers clear and loud audio. With the
speaker facing the operator, audio can be
clearly heard without impediment during
operation.
6 programmable buttons
A pair of up/down and P0–P3 function assignable buttons allow you to customize
functions to meet specific needs. An independent volume knob offers simple, convenient operation.
MIL grade rugged construction
The tough aluminum die-cast chassis and
polycarbonate front panel have been
tested to the MIL standard 810F. With this
heavy-duty construction, the IC-F5022 series provides reliable operation over the
long term in all manners of rugged environments.
Most popular signalings built-in
Use the built-in 2-Tone, 5-Tone, CTCSS
and DTCS capabilities as standard to set
up your own talk groups, PTT ID and
quiet stand-by when others are talking.
The IC-F5022 series has added CTCSS/
DTCS high speed decode.
When the radio is not operated for a preset period, the radio sounds a beep and
requires you to push any button. If the
radio is still not operated for a specified
wait period, an emergency signal automatically transmits and informs co-workers that something may have happened
to the individual worker.
External memory channel
control with optional ACC cable
With the optional OPC-1939 D-SUB 15pin ACC cable, the IC-F5022 series can
be programmed to control an operating
channel from an external device (up to 16
preprogrammed channels). The ACC connector also provides an ignition sensing
function, external PTT, PC command,
horn honk, audio output and modulated
signal input depending on programming.
Mode dependent scan
In the mode dependent setting, the scanning setting is dependent on the operating channel. When you change the
operating channel, the scanning list automatically changes to the list set for that
channel. It is convenient when you move
to a different operating area and change
operating channel, you don’t have to
change the scanning setting.
Tx channel setting and
Talk back function
The Tx channel setting allows you to program a transmission channel while scanning. Start channel, last detected channel,
priority and preprogrammed channel are
selectable. Prior to the Tx channel setting,
the talk back function allows you to talk on
the last detected channel, while scanning
resumes after a preset time. The user can
easily make a quick response with this
function.
Photo includes optional OPC-1939
Other features
• BIIS 1200 PTT ID transmission
• Microphone hanger action programmable
• Wide, middle and narrow channel spacing (25, 20, 12.5kHz) programmable
(* Programmable 25/12.5kHz or 20/12.5kHz)
• Optional DTMF microphone (HM-152T)
• Time-out-timer, lock-out penalty timer
and more
• 8 DTMF autodial memories
• Power-on password function
• Nuisance delete function
MDC 1200 compatible
The following MDC features are available
with the built-in MDC signaling.
• PTT ID (TX/RX)
• Radio check (RX)
• Radio stun (RX)
• Radio revive (RX)
• Emergency TX/RX (No ACK)
• 5 alias table (Max.)
Multiple 2-Tone, Multiple 5-Tone
Up to ten 2-Tone and eight 5-Tone codes
can be decoded on a channel. When a
matched tone is received, the following
items are programmable for each code.
• Beep sound • Answer back • Scan
• Bell icon
• Radio stun/kill/revive
Wide frequency coverage
The IC-F5022 series covers a wide frequency range in one version (VHF 136–
174, UHF 400–470MHz).
Compatible with IC-F3022/F4022 series handheld
The IC-F5022/F6022 series is designed
to be a companion to our IC-F3022/F4022
series handheld transceiver. The number
of channels and banks, signaling formats,
programming software and voice scrambler are compatible. Take advantage of
the shared functionality to complete your
communications requirements.
VHF AND UHF TRANSCEIVERS
SPECIFICATIONS
GENERAL
• Frequency range
IC-F5022
IC-F6022
• Number of Channels
• Channel spacing
• Type of emission
TRANSMITTER
:
136–174MHz
400–470MHz
: Max. 128 Ch/ 8 zones
: 12.5/20/25kHz
: 8K50F3E, 14K0F3E,
16K0F3E
• Antenna impedance
: 50Ω (SO-239)
• Operating temp. range : –25˚C to +55˚C
• Power supply requirement : 13.2V DC
• Current drain (approx.) :
Tx
25W
5.0A
Rx
Max. audio
0.7A
Stand-by
250mA
• Dimensions (W×H×D)
: 150×40×117.5 mm
(at 13.2V DC)
: –4dBµV typ.
• Adjacent Ch. selectivity
• Spurious response
• Intermodulation
• Hum and noise ratio
• Audio output power
: 75/75/65dB typ. (W/M/N)
: 80dB typ.
: 67dB typ.
: 55/53/50dB typ. (W/M/N)
: 4W typ. at 5% distortion with
• External SP connector
: 2-conductor 3.5 (d) mm
(1⁄8″)/4Ω
(emf, at 20 dB SINAD)
a 4Ω load
Applicable U.S. Military Specifications
Icom makes rugged products that have been tested to and passed the
following MIL-STD requirements and strict environmental standards.
: 0.8kg (approx.)
Measurements made in accordance with EN 300-086.
All stated specifications are subject to change without notice or obligation.
OPTIONS
• Sensitivity
(High, low2, low1; approx.)
• Max. frequency deviation: ± 5.0/4.0/2.5kHz (W/M/N)
• Frequency stability
: ±1.5kHz
• Spurious emissions
: 0.25µW (≤ 1GHz)
1.0µW (> 1GHz)
• Audio harmonic distortion : 3% typ. (40% deviation)
• Residual modulation
: 55/53/50dB typ. (W/M/N)
• Modulation limiting
: 70–100% of Max. deviation
• External Mic. impedance : 600Ω (8-pin modular)
(Projections not included)
• Weight
RECEIVER
• Output power (VHF/UHF) : 25W, 10W, 2.5W
MIL 810F
Standard
Method
Procedure
Low Pressure
500.4
I, II
High Temperature
501.4
I, II
Low Temperature
502.4
I, II
Temperature Shock
503.4
I
Solar Radiation
505.4
I
Humidity
507.4
–
Settling Dust
510.4
III
Vibration
514.5
I
Shock
516.5
I, IV
Also meets equivalent MIL-STD-810-C, -D and -E.
Supplied Accessories
• Hand mic. (HM-152)
• DC power cable
• Mounting bracket kit
• Microphone hanger
• Key assign stickers
Some options may not be available in some countries. Please ask your dealer for details.
HAND MICROPHONES
DESKTOP MICROPHONE
EXTERNAL SPEAKERS
SM-26
HM-152
HM-152T
HM-148G
INTERNAL UNITS
UT-108R
DTMF DECODER
SP-5
HM-148T
HM-152 : Regular hand microphone. Same as supplied.
HM-152T : DTMF microphone.
HM-148G : Heavy duty microphone. Self-grounding type.
HM-148T : Heavy duty microphone with DTMF keypad. Self-grounding type.
SM-26 : Convenient for dispatching, equipped with monitor switch.
SM-25 is also available.
SP-10
SP-22
SP-5 : Large external speaker.
SP-10 : Mid sized external speaker.
SP-22 : Compact and easy-to-install external speaker.
ACC CABLES
UT-109R VOICE
SCRAMBLER
UNIT
UT-110R VOICE
SCRAMBLER
UNIT
UT-108R : Provides DTMF decode capability.
UT-109R : Up to 32 scrambling codes are available.
UT-110R : Provides higher operating security. Up to 1020 (255 codes ×
4 groups) scrambling codes are available.
OPC-1939
15-pin type
OPC-2078
25-pin type
For connecting with a PC, external speaker, external
channel control, ignition sense line or vehicle’s horn.
Icom, Icom Inc. and the Icom logo are registered trademarks of Icom Incorporated (Japan) in the United States, the United Kingdom, Germany, France, Spain, Russia, Japan and/or other countries.
1-1-32, Kami-minami, Hirano-ku, Osaka 547-0003, Japan Phone: +81 (06) 6793 5302
Fax: +81 (06) 6793 0013
www.icom.co.jp/world
2380 116th Avenue NE,
Bellevue, WA 98004, U.S.A.
Phone : +1 (425) 454-8155
Fax
: +1 (425) 454-1509
E-mail : sales@icomamerica.com
URL : http://www.icomamerica.com
146A Harris Road, East Tamaki,
Auckland, New Zealand
Phone : +64 (09) 274 4062
Fax
: +64 (09) 274 4708
E-mail : inquiries@icom.co.nz
URL : http://www.icom.co.nz
Blacksole House, Altira Park,
Herne Bay, Kent, CT6 6GZ, U.K.
Phone : +44 (01227) 741741
Fax
: +44 (01227) 741742
E-mail : info@icomuk.co.uk
URL : http://www.icomuk.co.uk
6F No. 68, Sec. 1 Cheng-Teh Road,
Taipei, Taiwan, R.O.C.
Phone : +886 (02) 2559 1899
Fax
: +886 (02) 2559 1874
E-mail : sales@asia-icom.com
URL : http://www.asia-icom.com
Glenwood Centre #150-6165 Highway 17,
Delta, B.C., V4K 5B8, Canada
Phone : +1 (604) 952-4266
Fax
: +1 (604) 952-0090
E-mail : info@icomcanada.com
URL : http://www.icomcanada.com
Communication Equipment
Auf der Krautweide 24
65812 Bad Soden am Taunus, Germany
Phone : +49 (6196) 76685-0
Fax
: +49 (6196) 76685-50
E-mail : info@icomeurope.com
URL : http://www.icomeurope.com
Zac de la Plaine,
1 Rue Brindejonc des Moulinais, BP 45804,
31505 Toulouse Cedex 5, France
Phone : +33 (5) 61 36 03 03
Fax
: +33 (5) 61 36 03 00
E-mail : icom@icom-france.com
URL : http://www.icom-france.com
10C07, Long Silver Mansion, No.88,
Yong Ding Road, Haidian District,
Beijing, 100039, China
Phone : +86 (010) 5889 5391/5392/5393
Fax
: +86 (010) 5889 5395
E-mail : bjicom@bjicom.com
URL : http://www.bjicom.com
Unit 1 / 103 Garden Road,
Clayton, VIC 3168 Australia
Phone : +61 (03) 9549 7500
Fax
: +61 (03) 9549 7505
E-mail : sales@icom.net.au
URL : http://www.icom.net.au
Ctra. Rubi, No. 88 "Edificio Can Castanyer"
Bajos A 08174, Sant Cugat del Valles,
Barcelona, Spain
Phone : +34 (93) 590 26 70
Fax
: +34 (93) 589 04 46
E-mail : icom@icomspain.com
URL : http://www.icomspain.com
81-850 Sopot, ul. 3 Maja 54, Poland
Phone : +48 (58) 550 7135
Fax
: +48 (58) 551 0484
E-mail : icompolska@icompolska.com.pl
URL : http://www.icompolska.com.pl
Count on us!
Your local distributor/dealer:
09ES010C
© 2009–2011 Icom Inc.
Printed in Japan
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising