KIRAY 100 Infrared thermometer

KIRAY 100 Infrared thermometer
KIRAY 100
Infrared thermometer
Infrared thermometer KIRAY 100 with dual laser sighting is
a key tool to diagnose, inspect and check any temperature,
with the advantage of using “no-contact” technology. You can
safely measure surface temperatures of hot objects,
dangerous or difficult to access. Perfect tool to take
temperature in a house, a garage, a workshop, an office, a
car, a kitchen etc...
Technical features
Distance from the target
Distance
Diameter
254
12.7
260
13
508
25.4
mm
mm
Spectral response..................8 - 14 µm
Optical.....................................D.S : 20:1 (13 mm at 260 mm)
Temperature range.................From -50 to +800°C
Accuracy*...............................From -50 à +20°C : ±2.5°C
From +20 to +300°C : ±1% of reading ±1°C
From +300°C to +800°C : ±1.5%
Infrared repeatability..............From -50 to +20°C : ±1.3°C
From +20 to +800°C : ±0.5% or ±0.5°C
Display resolution..................0.1°C
Response time.......................150 ms
Emissivity...............................Adjustable from 0.10 to 1.0 (pre-set at 0.95)
Over range indication............Display indication : « ---- »
Dual laser sighting.................Wave length : from 630 nm to 670 nm
Output < 1mW, Class 2 (II)
Positive or negative
temperature indication................Automatic (no indication for a positive
D:S=20:1
13 mm at 260 mm
YES
NO
Make sure that the target is larger than the size of the laser sighting.
temperature)
(-) sign for a negative temperature
Display....................................4 digits with LCD backlighted display
Auto-extinction.......................Automatic after 7 seconds of inactivity
High/low alarm.......................Flashing signal on display and beep signal
with adjustable thresholds
Power supply..........................Alkaline 9V battery
Autonomy...............................105 h (inactive laser and backlight)
20 h (active laser and backlight)
Use temperature.....................From 0 to +10°C for a short period
From +11 to +50 °C for a long period
Storage temperature..............From -10°C to +60°C
Relative humidity...................From 10 to 90%HR in operating mode
and > 80%RH in storage
Dimensions.............................145 x 95 x 40 mm
Weight.....................................180 g (included battery)
*Accuracy for an ambient temperature from 23 to 25°C (with a relative humidity
lower than 80% RH)
Display
Description
LCD
backlighted
display
IR sensor
(infrared)
Up button
Down button
Mode button
1 – Technical unit °C/°F
2 – Low battery indicator
3 – Emissivity value = 0.95 (factory setting)
4 – Max temperature indicator.
5 – Temperature value
6 – Current measurement indicator
7 – HOLD indicator (fixed measurement)
8 – Laser in operation indicator
9 – Lock indicator (continuous measurement)
10 – High alarm symbol (fixed : activated alarm ;
flashing + beep : alarm thresholds exceeded)
11 – Low alarm symbol (fixed : activated alarm ;
flashing + beep : alarm thresholds exceeded)
KIRAY 100 buttons
Trigger
Battery
compartment
Set technical unit
(°C/°F)
3
1
Supplied with
2
●
1 – Up button. It allows to increment emissivity and high/low alarm thresholds.
This button also allows in measurement mode to activate or deactivate the
laser.
●
Case with passer-by belt
User manual
CE Certification
2 – Down button. It allows to decrement emissivity and high/low alarm thresholds.
This device meets with following standards' requirements.
This button also allows in measurement mode to activate or deactivate the
backlight.
EN 50081-1 : 1992, Electromagnetic compatibility, Part 1
EN 50082-1 : 1992, Electromagnetic compatibility, Part 2
3 – Mode button. It allows to navigate through the modes (emissivity, lock, high
alarm, low alarm).
Infrared thermometer, how does it work ?
Infrared thermometers can measure the surface temperature of an
object. Its optic lens catches the energy emitted and reflected by the
object. This energy is collected and focused onto a detector. This
information is displayed as temperature. The laser pointer is only
used to aim at the target.
Infrared sensor
Laser sighting Emitted energy by the
object as radiation
Ref. FTang - KIRAY100 - 11/08/10 - RCS (24) Périgueux 349 282 095 Non-contractual document – We reserve the right to modify the characteristics of our products without prior notice.
Output laser sighting
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising