EMX512SC - EMX (Box type)
EMX512SC - EMX (Box type) - Powered Mixers - Mixers - Live Sound -...
1 of 2
http://usa.yamaha.com/products/live_sound/mixers/powered-mixers/emx...
EMX512SC
Compare with Other Products
[EMX (Box type)]
Find a Dealer:
Integrated Solutions for Superior Live Sound
Top-quality effects and GEQ on all models, plus compression on the EMX512SC and EMX312SC.
Choose 500, 300, or 200 watt stereo power output in a portable box-type mixer.
The colors and finishes shown may vary from those on the actual products.
Enlarge
Overview
Features
Specifications
Support
General Specifications
Maximum Output Power @ 0.5 % THD at 1 kHz
500 W/4 Ω; 350 W/8 Ω
Frequency Response
-3, 0, 1 dB 20 Hz-20 kHz, ref to the nominal output level @ 1
kHz
Total Harmonic Distortion
Less than 0.5 % (THD+N) +14 dB @ 20 Hz, 1 kHz, 20 kHz,
GAIN control: all nominal
Hum & Noise
Equivalent Input Noise, -115 dBu, Rs = 150 Ω CH 1-4
MIC/LINE: MIC
Crosstalk
-65 dB @ 1 kHz
Input Connectors
CH 1-4: XLR and Phone; CH 5/6, 7/8: XLR and Phone; CH
9/10, 11/12: XLR and Pin
CH EQ
HIGH, MID, LOW
Phantom Power
15 V
Graphic Equalizer
7 Band (125, 250, 500, 1 k, 2 k, 4 k, 8 kHz): Main (Stereo) and
Monitor
Digital Effects
SPX Digital Multi Effector (24 bit AD/DA, 32 bit Internal
Processing): 16 Programs
Power Amp Mode
Main L/R, Main (L+R)/Monitor
Foot Switch
On/Off
Dimensions (W x D x H)
442 x 274 x 286 mm (17-3/8" x 10-3/4" x 11-1/4")
Weight
10 kg (22 lbs.)
Power Requirements
120 V 60 Hz
Power Consumption
450 W
INPUT CHARACTERISTICS
Input Terminals
CH INPUT 1-4
XLR
*3
MIC/LINE Actual Load
Impedance
For Use With
Nominal
Input level
Sensitivity
*2
Position
Max. before
clip
MIC
50-600 Ω Mics
-60 dBu
(0.69 mV)
-35 dBu
(13.8
mV)
-15 dBu
(138 mV)
-30 dBu
(21.8 mV)
-5 dBu
+15 dBu
(436 mV) (4.36 V)
LINE
2 kΩ
4/22/2011 9:18 AM
EMX512SC - EMX (Box type) - Powered Mixers - Mixers - Live Sound -...
2 of 2
Phone MIC
*4
6 KΩ
http://usa.yamaha.com/products/live_sound/mixers/powered-mixers/emx...
600 Ω
LINE
CH INPUT 5/6, 7/8
XLR
*3
-
Phone *5
-50 dBu
(2.18 mV)
-25 dBu
(43.6
mV)
-5 dBu
(436 mV)
-20 dBu
(69.0 mV)
+5 dBu
(1.38 V)
+25 dBu
(13.8 V)
2 kΩ
50-600 Ω Mics
-60 dBu
(0.69 mV)
-35 dBu
(13.8
mV)
-15 dBu
(138 mV)
10 KΩ
600 Ω Lines
-20 dBu
(69.0 mV)
+5 dBu
(1.38 V)
+25 dBu
(13.8 V)
CH INPUT 9/10, 11/12 XLR
*3
-
2 kΩ
50-600 Ω Mics
-60 dBu
(0.69 mV)
-35 dBu
(13.8
mV)
-15 dBu
(138 mV)
RCA
Pin
-
10 KΩ
600 Ω Lines
-20 dBu
(69.0 mV)
+5 dBu
(1.38 V)
+25 dBu
(13.8 V)
*1 0 dBu is referenced to 0.775 Vrms.
*2 Sensitivity is the lowest level that will produce an output of +4 dB (1.23 V), or the nominal output level when the unit is set to
maximum level. (All level controls are at
maximum position.)
*3 XLR-3-31 type connectors are balanced. (1=GND, 2=HOT, 3=COLD)
*4 Phone Jacks are balanced. (Tip=HOT, Ring=COLD, Sleeve=GND)
*5 Phone Jacks are unbalanced.
OUTPUT CHARACTERISTICS
Output
Terminals
Actual Source
Impedance
For Use With
Nominal
SPEAKER
OUT
0.1 Ω
4 Ω Speakers
[A1, A2, B1,
B2]
Output level
Nominal
Connector
Max. before
clip
EMX512SC 125 W
500 W
[A1, B1] SPEAKON
EMX312SC 75 W
300 W
[A2, B2] Phone
Jack *2
EMX212S
50 W
200 W
MAIN OUT [L,
R]
600 Ω
10 kΩ Lines
-
+4 dBu (1.23
V)
+20 dBu (7.75 Phone Jack *2
V)
EFFECT OUT
600 Ω
10 kΩ Lines
-
+4 dBu (1.23
V)
+20 dBu (7.75 Phone Jack *2
V)
MONITOR
OUT
600 Ω
10 kΩ Lines
-
+4 dBu (1.23
V)
+20 dBu (7.75 Phone Jack *2
V)
REC OUT [L,
R]
600 Ω
10 kΩ Lines
-
-10 dBV (316
mV)
+10 dBV
(3.16 V)
RCA Pin Jack
*1 0 dBu is referenced to 0.775 Vrms. 0 dBV is referenced to 1 Vrms.
*2 Phone Jacks are unbalanced.
Overview
Features
Specifications
Support
Return to Top
Copyright © 2011 Yamaha Corporation of America and Yamaha Corporation. All rights reserved.
4/22/2011 9:18 AM
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising