Product Specifications

Product Specifications
Andrew Solutions
L4TNM
L4TNM--PSA Type N Male Positive Stop™ for 1/2 in AL4RPV­50, LDF4­50A cable l
This product is part of the CommScope Wired for Wireless® Solution General Specifications
Interface N Male Body Style Straight Brand HELIAX® |
Harmonized System (HS) Code 854420 (Coaxial cable and other coaxial electric conductors) Mounting Angle Straight Positive Stop™ Electrical Specifications
Connector Impedance 50 ohm Operating Frequency Band 0 – 8800 MHz Cable Impedance 50 ohm 3rd Order IMD, typical ­116 dBm @ 910 MHz 3rd Order IMD Test Method Two +43 dBm carriers RF Operating Voltage, maximum (vrms) 707.00 V dc Test Voltage 2000 V Outer Contact Resistance, maximum 0.30 mOhm Inner Contact Resistance, maximum 2.00 mOhm Insulation Resistance, minimum 5000 MOhm Average Power 0.6 kW @ 900 MHz Peak Power, maximum 10.00 kW Insertion Loss, typical 0.05 dB Shielding Effectiveness ­130 dB ©2013 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope.
All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: November 6, 2012
page 1 of 3
March 4, 2013
Product Specifications
L4TNM
L4TNM--PSA
Outline Drawing
Mechanical Specifications
Outer Contact Attachment Method Ring­flare Inner Contact Attachment Method Captivated Outer Contact Plating Trimetal Inner Contact Plating Silver Attachment Durability 25 cycles Interface Durability 500 cycles Interface Durability Method IEC 61169­16:9.5 Connector Retention Tensile Force 890 N
Connector Retention Torque 5.42 N­m
Insertion Force 66.72 N
Insertion Force Method MIL­C­39012C­3.12, 4.6.9 Coupling Nut Proof Torque 176.26 N­m
|
Coupling Nut Retention Force 444.82 N
100.00 lbf |
200 lbf |
|
48.00 in lb 15.00 lbf |
1560.00 in lb Coupling Nut Retention Force Method MIL­C­39012C­3.25, 4.6.22 Dimensions
Nominal Size 1/2 in Diameter 22.35 mm
|
0.88 in Length 76.70 mm
|
3.02 in Weight 94.71 g
0.21 lb |
Environmental Specifications
Operating Temperature ­55 °C to +85 °C (­67 °F to +185 °F) Storage Temperature ­55 °C to +85 °C (­67 °F to +185 °F) ©2013 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope.
All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: November 6, 2012
page 2 of 3
March 4, 2013
Product Specifications
L4TNM
L4TNM--PSA
Immersion Depth 1 m Immersion Test Mating Unmated Immersion Test Method IEC 60529:2001, IP68 Water Jetting Test Mating Unmated Water Jetting Test Method IEC 60529:2001, IP66 Moisture Resistance Test Method MIL­STD­202F, Method 106F Mechanical Shock Test Method MIL­STD­202, Method 213, Test Condition I Thermal Shock Test Method MIL­STD­202F, Method 107G, Test Condition A­1, Low Temperature ­55 °C Vibration Test Method IEC 60068­2­6 Corrosion Test Method MIL­STD­1344A, Method 1001.1, Test Condition A Return Loss/VSWR
Frequency Band
45–1000 MHz
1010–2200 MHz
2210–3000 MHz
3010–4000 MHz
4010–6000 MHz
6010–8000 MHz
VSWR
1.02
1.03
1.05
1.09
1.25
1.33
Return Loss (dB)
39.00
37.00
33.00
27.00
19.00
17.00
Regulatory Compliance/Certifications
Agency
RoHS 2011/65/EU
China RoHS SJ/T 11364­2006
ISO 9001:2008
Classification
Compliant by Exemption
Above Maximum Concentration Value (MCV)
Designed, manufactured and/or distributed under this quality management system
* Footnotes
Immersion Depth Immersion at specified depth for 24 hours Insertion Loss, typical 0.05√¯freq (GHz) (not applicable for elliptical waveguide) ©2013 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope.
All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: November 6, 2012
page 3 of 3
March 4, 2013

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project