measurement
ea
M
The SYSTEM 8 Multiple Instrument Station (MIS) provides all commonly required test instruments in one compact
hardware module installed in a PC or external case. A 100MHz digital storage oscilloscope, 150MHz frequency
counter, 10MHz function generator, fully floating multimeter, multi-rail power supply, quad programmable
analogue outputs and quad digital outputs cover almost any test and measurement need.
Do you find it takes too long to set up a test or that someone has changed your instrument settings?
Do you need a simplified combination of instruments giving basic control and a versatile user interface to allow
problem free operation by all skill levels?
Design Mode allows custom instruments to be created for each individual application and provides an ideal
platform for computer based training (CBT) through the highly innovative combination of hardware and software.
The sophisticated software can remember unlimited test configurations, controlled by access levels with password
protection, so that each operator can save their instrument settings and recall them in seconds.
nt
Universal Instrument Suite
sureme
In c uit
irc
P
C
measurement
d
PC
require
Digital Storage Oscilloscope
Floating Digital Multimeter
Frequency Counter
Auxiliary Power Supply
Function Generator
Quad Programmable Analogue I/O
Quad Digital I/O
Test Flow Manager
Automated Fault-Finding Sequences
Customisable Instruments
•
•
•
•
•
•
•
•
•
•
SYSTEM 8 Multiple Instrument Station Module
The SYSTEM 8 Multiple
Instrument Station is a
complete laboratory on
your PC, with seven high
specification test and
measurement instruments
in one compact module.
www.abielectronics.co.uk
Multiple Instrument Station Module
Digital Storage Oscilloscope
Vertical
Channels
Sampling rate
Bandwidth
Coupling
Input impedance
Vertical sensitivity
Vertical resolution
Max. input voltage
2 + external trigger
50MS/s (5GS/s ERS mode)
> 100MHz
AC, DC, GND
1M Ohm, 25pF
20mV to 2V per division
8 bits
100VDC
Horizontal
Sweep speed
Memory
Modes
5ns/div to 5s/div
64kbytes/channel
normal, auto, single
Internal trigger
Source
Slope
Sensitivity
Coupling
channel 1, channel 2, function generator
positive, negative
< 0.5 divisions
AC, DC, HF reject, LF reject
External trigger
Input impedance
Slope
Sensitivity
Coupling
Max. input voltage
1M Ohm, 25pF
positive, negative
< 10mV
AC, DC, HF reject, LF reject
100V DC
Trigger delay
Pre-trigger
Post-trigger
0 to 100% of sweep time
0 to 100% of sweep time
Measurements
Automatic
Comparison
standard waveform parameters
time and voltage
Digital Floating Multimeter
Channels
Input impedance
Statistics
2 channels
10M Ohm
minimum, maximum, average
Channel 1
Modes
Voltage range
DC voltage resolution
DC voltage accuracy
AC voltage resolution
AC voltage accuracy
DC volts, AC volts
0 to 400V
0.005% full scale
+/-0.05%
0.05% full scale
+/-0.1%
Channel 2
Modes
Voltage range
Current range
Resistance range
DC voltage resolution
DC voltage accuracy
AC voltage resolution
AC voltage accuracy
DC current resolution
DC current accuracy
AC current resolution
AC current accuracy
Resistance resolution
Resistance accuracy
DC volts, AC volts, DC current, AC current,
resistance
0 to 400V
0 to 2A
0 to 20M Ohm
0.005% full scale
+/-0.05%
0.05% full scale
+/-0.1%
1mA
+/-0.1%
1mA
+/-0.2%
0.01% full scale
+/-0.1%
Auxiliary Power Supply
Output Voltages
Output Current
+5V, +9V, -9V
+5V supply - 500mA
+9V supply - 100mA
-9V supply - 100mA
Function Generator
Waveforms
Frequency range
Pulse width
Modulation modes
Modulation frequency
Duty cycle
Amplitude
DC offset
Rise/fall time
Output impedance
sine, square, triangle, single-shot pulse
0.1Hz to 10MHz, resolution 0.1% of range full
scale
100ns to 10s
AM, FM, PWM
400Hz internal
20% to 80%, resolution 1%
0V to 5V, resolution 50mV
-7.5V to 7.5V, resolution 50mV
25ns
50 Ohm
Sweep mode
Start frequency
End frequency
Steps
Time per step
0.1Hz to 10MHz
0.1Hz to 10MHz
1 to 1000
0.1s to 9.9s
ABI Electronics Ltd
Dodworth Business Park
Barnsley S75 3SP
South Yorkshire
United Kingdom
Tel: +44 (0) 1226 207420
Fax: +44 (0) 1226 207620
www.abielectronics.co.uk
Multiple Instrument Station (continued)
Frequency Counter
Modes
event, frequency, pulse width
Accessories
Output voltages
Channel 1
Impedance
Frequency range
Sensitivity
Pulse response
Maximum input
Basic accuracy
50 Ohm
1MHz to 150MHz
< 5mV rms @ 2MHz to 10MHz
<15mV rms @ 10MHz to 100MHz
50mV, 25ns pulse @ 500Hz
+/- 5V
+/- 0.02% +/- 1 count
Channel 2
Impedance
Frequency range
Sensitivity
Maximum input
Basic accuracy
1 MOhm
2Hz to 100MHz
< 300mV rms @ 10Hz
< 150mV rms @ 10kHz to 10MHz
< 350mV rms @ 33MHz
200V rms
+/- 0.02% +/- 1 count
2 x DSO probes
1 x yellow probe and cable
1x blue probe and cable
1x black probe and cable
1x universal I/O cable (not terminated)
Options
Internal fitting
External fitting
PCI Interface
- MultiLink case (cost option) with USB
- External case (cost option) which will hold up
to 5 System8 modules (USB interface).
PC Requirements
Pentium (1GHz) System
Windows XP™
20MB of free hard disk space
256 MB RAM
CD ROM Drive
Event Mode
Ch1 event count
Ext gate width
Ext gate width time
Statistics
Display
0 to 9,999,999,999
minimum 20ns
6 hours, 10ms resolution
10.74s, 5µs resolution
84ms, 40ns resolution
lowest, highest, average
frequency, period, RPM events,
pulse width, gate time
The ABI development team strive continuously to improve their products for
the benefit of the customer. The specification of current products may
therefore vary from that described in the brochure.
Windows is a registered trademark of Microsoft Corp., USA
Universal I/O
Number of channels
4 channels
Analogue Channels
Modes
Voltage output range
Voltage input range
Current output range
voltage output, voltage input, current output,
current input
-9V to +9Vm resolution 10mV
-10V to +10V, resolution 10mV
0 to +/-20mA, resolution µA
Digital Channels
Modes
Voltage
logic output high, logic output low
logic measurement
TTL compatible logic levels
ABI Electronics Ltd
Dodworth Business Park
Barnsley S75 3SP
South Yorkshire
United Kingdom
Tel: +44 (0) 1226 207420
Fax: +44 (0) 1226 207620
www.abielectronics.co.uk
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising