4ipnet EAP110 Indoor WiFi Access Point

4ipnet EAP110 Indoor WiFi Access Point
Created on: Monday 11 September, 2017
4ipnet EAP110 Indoor WiFi Access Point
Product Name: 4ipnet EAP110 Indoor WiFi Access Point
Manufacturer: Model Number: EAP110-p
Please Note: The 4ipnet EAP110 has been discontinued. We recommend the 4ipnet EAP701 as
a good alternative.
4ipnet EAP110 Indoor WiFi Access Point
Embedded with 802.11n/b/g 2.4GHz MIMO radio in IP50 dust-proof metal housing, the high speed
(up to 300Mbps) and durable 4ipnet EAP110 Enterprise Access Point is designed for wireless
connectivity in enterprise or industrial environments of all dimensions.
The EAP110 makes the wireless communication fast, secure and easy. It supports Tunnel-based
AP Management, business grade security such as 802.1X, and Wi-Fi Protected Access (WPA and
WPA2). EAP110 also supports WDS links to bridge wireless links of multiple EAP110s for forming
wider wireless network coverage. EAP110 features multiple ESSIDs with VLAN tags; one EAP110
can emulate up to eight Virtual APs, great for enterprise applications, such as separating the
traffics of different departments using different ESSIDs. Wireless clients are shielded from each
other by Layer 2 isolation, preventing possible attacks from malicious users. Furthermore,
implemented with Wireless Layer 2 firewall, EAP110 inspects all inter-Virtual AP traffics as well as
wireless to wired traffics and decides whether to block or allow passage according to specified
security criteria. Administrators can define their own firewall rules to create a secure wireless
networking environment. Other advanced features of Wireless Layer 2 firewall include DHCP
snooping and ARP inspection.
Supporting up to 300Mbps wireless speed with its 802.11n 2 x 2 MIMO solutions, EAP110 is
perfect for bandwidth-hungry applications such as video surveillance, multimedia streaming over
the wireless links. EAP110’s higher throughput, security and durability make it a perfect
choice of wireless connectivity for your applications.
2.4GHz 2 x 2 MIMO Field Replaceable Antenna & Backward Compatible with 802.11n/b/g
• The antenna diversity design enhances the connection reliability to improve data transmission
capability
• Two detachable antennas for optimal wireless coverage and field replacement flexibility
• Equipped with a high-speed IEEE 802.11n/b/g wireless network interface, transmission rates up
to 300Mbps
WDS for Extending Wireless Coverage
• Creates structural WDS (Bridge or Repeater) links connecting to other WDS-capable APs
• WDS links can serve as EAP110's LAN connections to replace Ethernet ports, or simply bridge
the wired side and the wireless side as a single network
Business-class WLAN Security & Client Authentications
• Advanced security options: 64/128 bits WEP, WPA/WPA2 with IEEE 802.1X or PSK
(Pre-Shared Key)
• Wireless LAN segmentation, Disable SSID Broadcast and the option of station-isolation
• Configuration-capable to filter out unauthorized wireless clients with built-in MAC-based access
control list or via a back-end RADIUS server by sending an authentication request
• Wireless Layer 2 Firewall with customizable firewall rules to filter inter-Virtual AP and wireless to
wired data traffics, safe guarding wireless network integrity
Multiple Virtual APs & Capability of Client Isolation
www.4gon.co.uk | op@support.4gon.co.uk | Page 1/4
Created on: Monday 11 September, 2017
4ipnet EAP110 Indoor WiFi Access Point
• One EAP100 can emulate up to 8 Virtual APs (VAP), each with its own ESSID; namely, one AP
can have 8 ESSIDs.
• Each VAP appears to clients as an independent AP and its traffic and be associated with a
VLAN ID.
• Supports client isolation, isolated from each other under one AP
Tunneled AP ManagementEAP110 can physically be deployed at any location with an IP network.
Its WLAN can be logically incorporated into a remote 4ipnet Secure WLAN Controller that
manages it through the internal network via secure tunnelsWith Tunneled AP Management,
wireless clients associated to EAP110 can enjoy the network service provided by the remote
4ipnet Secure WLAN ControllerPoE CapableThe IEEE 802.3af Power over Ethernet (PoE)
compliant design eliminates the need for power sockets, allows installation of this device in areas
where power outlets are not readily available to improve deployment flexibility, and provides
standard-based compatibility with other deviceWireless Radio
• Frequency band: 2.4 GHz
• Wireless architecture:
• AP mode
• WDS mode: (Bridge / Repeater)
• Modulation:
• OFDM (64-QAM, 16-QAM, QPSK, BPSK)
• DSSS (CCK, DBPSK, DQPSK)
• Channels:
• USA (Channel 1~11)
• Japan (Channel 1~14)
• Europe (Channel 1~13)
• Data rate with auto fallback:
• 802.11b: 1~11 Mbps
• 802.11g: 6~54 Mbps
• 802.11n: 6.5 ~ 300Mbps
• Transmit Power:
• 802.11g: Up to 15dBm
• 802.11b: Up to 17dBm
• 802.11n: Up to 15dBm
• Antenna: 2 x detachable with SMA connectors
• Receiver Sensitivity:
• 802.11b: 11Mbps@-90dBm
• 802.11g: 54Mbps@-74dBm
• 802.11n: 300Mbps@-68dBm
www.4gon.co.uk | op@support.4gon.co.uk | Page 2/4
Created on: Monday 11 September, 2017
4ipnet EAP110 Indoor WiFi Access Point
Handover & Roaming
• IEEE 802.11i pre-auth (PMKSA cache)
Security
• WEP (64/128/ bits)
• EAP-TLS + Dynamic WEP
• EAP-TTLS + Dynamic WEP
• PEAP/MS-PEAP + Dynamic WEP
• WPA (PSK + TKIP)
• WPA (802.1X certification + TKIP)
• 802.11i WPA2 (PSK + CCMP/AES)
• 802.11i WPA2 (802.1X certification + CCMP/AES)
• Setting for TKIP/CCMP/AES key's refreshing period
• Hidden ESSID support
• Layer 2 wireless isolation
• Wireless Layer 2 Firewall
• MAC Address filtering (MAC ACL)
• MAC authentication with RADIUS servers
• Maximum number of registered RADIUS servers: 2
System Management
• Web-based administration
• SNMP v1/v2c
• Provides Event Log
• Syslog information support
• Statistics
• Configuration backup and restore
• One-button-click to restore factory default setting
• Firmware upgrade
• Capable of performing RADIUS Accounting and Accounting Update
• Support Tunneled AP Management with 4ipnet Secure WLAN Controllers
Built-in Servers & Client Interfaces to Other Services
• DHCP client
• DNS client
• Syslog client
• RADIUS client
• SNMP v1/v2c client
Wireless Signal Management
• Number of ESSIDs (Virtual APs): 8
• Number of associated clients per VAP: 32
• Setting for maximum number of associated clients
Hardware Specifications
• IP50 Dust-proof metal case
www.4gon.co.uk | op@support.4gon.co.uk | Page 3/4
Created on: Monday 11 September, 2017
4ipnet EAP110 Indoor WiFi Access Point
• LAN Port: 1 × 10/100 Base-T Ethernet with PoE
• Screw Terminal Block: 1
• LED Indicators: 1 × Power, 1 × LAN, 1 × WLAN
Physical and Power
• Form factor: Wall Mountable
• Power:
• DC Power:5V,1A
• AC Input: 100~240 VAC, 50~60 Hz
• Alternative Power:
• 802.3af PoE (PSE not included)
• Dimensions (W x D x H): 6.5" x 3.6" x 1.2" (165 mm x 90 mm x 30 mm)
• Weight: 0.83 lbs (0.4 kg)
Environment
• Operation Temperature: -30 ~ 70 °C (-22 ~ 158 °F)
• Storage Temperature: -40 ~ 85 °C (-40 ~ 185 °F)
• Operation Humidity:10% ~ 80% (Non-condensing)
• Storage Humidity: 5% ~ 90% (Non-condensing)
Certifications
• FCC, CE, RoHS compliant
• RoHS compliant
Package Content
• 4ipnet EAP110 x 1
• CD-ROM (with User's Manual and QIG) x 1
• Quick Installation Guide x 1
• Power Adapter (DC 5V) x 1
• Antenna x 2
Please Enquire
www.4gon.co.uk | op@support.4gon.co.uk | Page 4/4
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising