PRIMUS - WA Precision Surveys
PRIMUS2 H
The fully automatic horizontal rotating laser
PRIMUS2 H2N
The fully automatic dual slope laser
PRIMUS2 H2N+
Fully automatic dual slope laser with tilt control and
automatic re-levelling when in slope mode
PRIMUS2 HVA
The fully automatic horizontal/vertical rotating laser
with AutoAlign function
PRIMUS2 HVA2N
The fully automatic horizontal/vertical dual slope laser
with AutoAlign function
2
NEDO PRIMUS
SERIES
2
Nedo PRIMUS , the series of fully automatic rotating lasers for professionals.
Ideal for levelling, aligning and grade control. Reliable and rugged for tough
2
construction jobs. Uncompromising quality for professionals. All PRIMUS
models can also be supplied with laser class 3R or laser class 2 with Bright
Beam technologyTM.
2
The PRIMUS series sets a new standard for fully automatic rotating lasers.
High technology made in Germany.
The Fully Automatic Rotating Lasers Made in Germany
www.nedo.com
Included as standard:
PRIMUS2 carefree package with
– 3-year warranty
– Free annual check during the
warranty period
PRIMUS2 - The Standard for Fully Automatic Rotating Lasers
Setting Standards for Precision and Reliability
The rotating lasers in the PRIMUS2 series remain extraordinarily precise whatever the site
conditions – in continuous rainfall, severe cold or blazing heat. Whether horizontal, vertical or
at a gradient.
Always reliable, whenever and wherever they are used.
The PRIMUS2 casing is protected against jet water and dust in line with IP 66. After use, the
PRIMUS2 can even be sprayed down with water to clean it.
The Standard for Ruggedness
Thanks to their innovative shock protection system, the rotating lasers of the PRIMUS2 series
can easily withstand a fall from a height of 1 m. The thick lining and rotor protection provide
additional safety.
Setting Standards for Visibility
All PRIMUS2 rotating lasers are fitted with high-quality laser diodes with 635 nm wavelength.
The customer can choose between high-power laser diodes in laser class 3R or laser diodes in
laser class 2 featuring Bright Beam Technology™ thus ensuring optimum visibility of the laser
beam even under unfavourable light conditions.
The Standard for Long Life
High-power rechargeable NiMH batteries with EneloopTM technology ensure a long operating life
of more than 100 hours, with minimal self-discharging. The intelligent power compartment
permits quick changing between battery and rechargeable battery operation.
Setting Standards for Easy Operation
1 Place the laser
2 Push the lever
3 That’s it!
Are you fed up with difficult-to-handle devices?
All PRIMUS2 lasers feature in addition to the standard 5/8" mounting thread the Quick-Fix rapid
locking system which allows the laser device to be fixed in just a few seconds to any tripod and
just as quickly detached. Just throw the lever for fixing or detaching.
That’s all!
Extremely sturdy:
The rotating lasers in the PRIMUS2 series conform to
protection class IP 66 for use under extremely adverse
working conditions.
2
Nedo PRIMUS H
Ref.-No. laser class 3R
Ref.-No laser class 2
2
PRIMUS H
472 020
472 020-632
Incl. transport case, laser receiver ACCEPTORpro, heavy-duty rod clamp, Quick-Fix, rechargeable batteries and charger
PRIMUS2 H
Incl. transport case, Quick-Fix, rechargeable batteries and charger
472 021
472 021-632
PRIMUS2 H
472 022
Incl. transport case, laser receiver ACCEPTORdigital, heavy-duty rod clamp, Quick-Fix, rechargeable batteries and charger
www.nedo.com
Supplied as standard:
ACCEPTORpro with Heavy-Duty rod clamp
Heavy-Duty rod clamp made of diecast aluminium. This
practically indestructible all-metal holding clip fixes the
laser receiver securely and dependably, even under the
most rugged operating conditions, to telescopic or flexible
staffs.
2
Nedo PRIMUS H
The fully automatic horizontal rotating laser
Features:
– Fully automatic rotating laser for horizontal applications
– Robust, motor-powered levelling
– Automatic level control stops the laser if it receives a heavy jolt. In this way, height errors
are avoided.
– High-power laser diode, laser class 3R, for highly visible laser beam and easy work at the
close range
– Alternatively available with laser class 2 with Bright Beam TechnologyTM
– Large, clear display showing rotation speed, battery level, etc.
– Rotor protection made of break-proof glass
– Laser receiver ACCEPTORpro
– Extremely easy to use
– Highly accurate even under toughest conditions
Scope of delivery:
Rotating laser PRIMUS2 H, laser receiver
ACCEPTORpro heavy-duty rod clamp,
rechargeable batteries and charger, QuickFix rapid locking system and transport case
Ref.-No. 472 020
Ideal for use on every construction site. Perfect for levelling in applications such as:
– Rough and fine grading
– Depth control for excavations
– Casting concrete
– Bricklaying
– Landscaping
2
Nedo PRIMUS H
Technical data:
Levelling accuracy
± 0.5 mm/10 m
Self-levelling range
± 5° motor-powered, with automatic level control
Working range Ø
approx. 700 m with receiver ACCEPTORpro
Laser
< 5 mW, laser class 3R, 635 nm or
< 1mW, laser class 2, 635 nm
Optional accessory ”Outdoor package”:
– Aluminium tripod,
working range 1.08 m to 1.72 m
– Flexi Rod with universal adapter and carrying
bag
Ref.-No. 200 350
Rotating speed
600 rpm
Protection class
IP 66
Power supply
rechargeable batteries NiMH 4.8 V, 8500 mAh
Operation duration
approx. 100 h
Connecting thread
5/8’’
Dual slope function
For horizontal use and for slopes in one or two axes
2
2
Nedo PRIMUS H2N+ / PRIMUS H2N
Ref.-No. laser class 3R
Ref.-No. laser class 2
PRIMUS2 H2N+ with tilt control
472 034
472 034-632
Incl. multi-function module COMMANDER2 H2N+ laser receiver incl. radio remote control), heavy-duty rod clamp, Quick-Fix, rechargeable
batteries, charger and transport case
PRIMUS2 H2N+ with tilt control
472 035
472 035-632
Incl. laser receiver ACCEPTORdigital, heavy-duty rod clamp, Quick-Fix, rechargeable batteries, charger and transport case
PRIMUS2 H2N+ with tilt control
Incl. Quick-Fix, rechargeable batteries, charger and transport case
472 033
472 033-632
Upgrade PRIMUS2 H2N+ to 900 rpm
399 602
399 602
472 030
472 030-632
2
PRIMUS H2N
Incl. transport case, rechargeable batteries and charger
PRIMUS2 H2N
472 031
472 031-632
Incl. multi-function module COMMANDER2 H2N (laser receiver incl. radio remote control), heavy-duty rod clamp, Quick-Fix, rechargeable
batteries, charger and transport case
PRIMUS2 H2N
472 032
Incl. laser receiver ACCEPTORdigital, heavy-duty rod clamp, rechargeable batteries, charger and transport case
472 032-632
Optional accessory:
Telescopic sight with
laser sighting
mechanism
Ref.-No. 461 096
PRIMUS2 H2N+
All PRIMUS2 H2N+ are also
available with 900 rpm.
Ref.-No. 399 602
2
Nedo PRIMUS H2N+
Fully automatic dual slope laser with tilt control and automatic re-levelling
when in slope mode
2
Nedo PRIMUS H2N
Fully automatic dual slope laser
Features:
–
–
–
–
–
–
–
–
Scope of delivery:
Rotating laser PRIMUS2 H2N, laser receiver
COMMANDER2 H2N with heavy-duty rod
clamp, rechargeable batteries, charger, QuickFix rapid locking system and transport case
Ref.-No. 472 031
–
–
–
Fully automatic dual slope laser
Robust, motor-powered levelling
Direct grade entry for the x and y axes
Slope values once input are stored upon switch-off
2
PRIMUS H2N+ with tilt control: the position of the laser plane is continuously monitored in
the slope mode and re-levelled if necessary.
Automatic level control stops the laser if it receives a heavy jolt. In this way, height errors
are avoided.
Large, clear display showing inclination, rotation speed, battery level, etc.
High-Power laser diode, laser class 3R, for highly visible laser beam and easy work at the
close range
Alternatively available with laser class 2 with Bright Beam TechnologyTM
Rotor protection made of break-proof glass
Highly accurate even under toughest conditions
Ideal for use on every construction site. Perfect for levelling in applications such as:
–
–
–
–
Elevation control
Rough and fine grading
Depth control for excavations
Machine control
–
–
–
–
Casting concrete
Bricklaying
Setting foundations and footings
Landscaping
2
Nedo PRIMUS H2N+ and H2N
Technical data:
Levelling accuracy
± 0.5 mm/10 m
Self-levelling range
± 5° motor-powered, with automatic level control
Accuracy of the slope function
± 0.015% PRIMUS2 H2N+,
± 0.1% PRIMUS2 H2N
Working range Ø
approx. 700 m with receiver COMMANDER2 H2N
Laser
< 5 mW, laser class 3R, 635 nm or
< 1mW, laser class 2, 635 nm
Rotating speed
600 rpm
Optional accessory ’’Outdoor package”:
– Aluminium tripod,
working range 1.08 m to 1.72 m
– Flexi Rod with universal adapter and carrying bag
Protection class
IP 66
Power supply
rechargeable batteries NiMH 4.8 V, 8500 mAh
Operation duration
approx. 100 h
Ref.-No. 200 350
Connecting thread
5/8’’
AutoAlign function
At the push of a button, the laser plane automatically
2
aligns with the laser receiver COMMANDER HVA.
Ideal when batter boards are used or on facade
construction.
The working range of the AutoAlign function is 50
metres.
AutoAlign Video
2
Nedo PRIMUS HVA
Ref.-No. laser class 3R
2
Ref.-No. laser class 2
PRIMUS HVA
472 050
472 050-632
Incl. multi-function module COMMANDER2 HVA (laser receiver incl. radio remote control), heavy-duty rod clamp, magnetic target board,
Quick-Fix, rechargeable batteries, charger and transport case
www.nedo.com
The AutoAlign function eliminates the need for tiresome manual alignment of the laser plane on the laser receiver, saving
considerable time when batter boards are used and in facade
construction. Batter board and facade construction adapters
are available as optional accessories for the PRIMUS2 and
the COMMANDER2 laser receiver.
2
Nedo PRIMUS HVA
The fully automatic horizontal/vertical rotating laser with AutoAlign function
Features:
Scope of delivery:
Rotating laser PRIMUS2 HVA, laser receiver
COMMANDER2 HVA with heavy-duty rod clamp,
magnetic target board, rechargeable batteries,
charger, Quick-Fix rapid locking system and
transport case
Ref.-No. 472 050
–
–
–
–
–
–
–
–
–
–
–
–
–
Fully automatic rotating laser for horizontal and vertical applications
AutoAlign function: automatic alignment of the laser beam to the zero mark of the laser receiver
Robust motor-powered levelling
Large, clear display showing rotation speed, battery level, etc.
Automatic level control stops the laser if it receives a heavy jolt. In this way, height errors are
avoided.
Manual setting of slopes in 2 axes
Scan function and dot mode
High-power laser diode, laser class 3R, for highly visible laser beam and easy work at the
close range
Alternatively available with laser class 2 with Bright Beam TechnologyTM
Upward plumb beam
Rotor protection made of break-proof glass
Highly accurate even under toughest conditions
Radio remote control for a convenient handling
Ideal for interior applications. Perfect for levelling and aligning jobs, especially in the
following areas:
Supplied as standard with COMMANDER2
HVA laser receiver with integrated remote
control and heavy-duty rod clamp
–
–
–
–
–
Depth control for excavations
Concrete casting
Concrete formwork
Use of batter boards
Bricklaying
–
–
–
–
Laying screed
Drywall installation
Ceiling construction
Facade construction
2
Nedo PRIMUS HVA
Technical data:
Levelling accuracy
± 0.5 mm/10 m
Self-levelling range
± 5° motor-powered, with automatic level control
Setting of slopes in two axes
manual
Working range Ø
approx. 500 m with receiver COMMANDER2 HVA
Laser
< 5 mW, laser class 3R, 635 nm or
< 1mW, laser class 2, 635 nm
Optional accessory ’’Accessory package 1’’:
– Elevating tripod, working range 0.80 m to 2.76 m
– Flexi Rod with universal adapter and carrying bag
Working range radio remote control
approx. 150 m
Working range AutoAlign
approx. 50 m
Rotating speed
10, 60, 300 and 600 rpm
Scanning angle
0°, 5°, 10° and 15°
Ref.-No. 210 350
Protection class
IP 66
Optional accessory ’’Accessory package 2’’:
– Elevating tripod, working range 0.78 m to 2.03 m
– Flexi Rod with universal adapter and carrying bag
Power supply
rechargeable batteries NiMH 4.8 V, 8500 mAh
Operation duration
approx. 100 h
Connecting thread
5/8’’
Ref.-No. 210 351
AutoAlign function
At the push of a button, the laser plane automatically
2
aligns with the laser receiver COMMANDER HVA2N.
Ideal when batter boards are used or on facade
construction.
The working range of the AutoAlign function is 50
metres.
AutoAlign Video
2
Nedo PRIMUS HVA2N
Ref.-No. laser class 3R
2
Ref.-No. laser class 2
PRIMUS HVA2N
472 061
472 061-632
2
Incl. magnetic target board, multi-function module COMMANDER HVA2N (laser receiver incl. radio remote control) and heavy-duty rod
clamp, Quick-Fix, rechargeable batteries, charger and transport case
www.nedo.com
Dual slope function
For horizontal use and for slopes in one or two axes.
Tilt monitoring and automatic re-levelling when in slope mode.
2
Nedo PRIMUS HVA2N
The fully automatic horizontal/vertical dual slope laser with AutoAlign function
Features:
–
–
–
–
–
–
–
–
Scope of delivery:
Rotating laser PRIMUS2 HVA2N, laser receiver
COMMANDER2 HVA2N with heavy-duty rod
clamp, magnetic target board, rechargeable
batteries, charger, Quick-Fix rapid locking
system and transport case
Ref.-No. 472 061
–
–
–
–
–
–
Fully automatic rotating laser for horizontal and vertical applications
Direct grade entry for the x and y axis
Tilt control: the position of the laser is continuously monitored in the tilt mode
AutoAlign function: automatic alignment of the laser beam to the zero mark of the laser receiver
Robust motor-powered levelling
Large, clear display showing inclination, rotation speed, battery level, etc.
Automatic level control stops the laser if it receives a heavy jolt. In this way, height errors are avoided.
High-power laser diode, laser class 3R, for highly visible laser beam and easy work at the
close range
Alternatively available with laser class 2 with Bright Beam TechnologyTM
Scan function and dot mode
Upward plumb beam
Rotor protection made of break-proof glass
Highly accurate even under toughest conditions
Radio remote control for a convenient handling
Ideal for use on every construction site. Perfect for levelling in applications such as:
–
–
–
–
–
–
Depth control for excavations
Concrete casting
Setting foundations and footings
Concrete casting
Use of batter boards
Bricklaying
–
–
–
–
–
–
Landscaping
Laying screed
Facade construction
Setting reference markers
Rough and fine grading
Ceiling construction
2
Nedo PRIMUS HVA2N
Technical data:
Levelling accuracy
± 0.5 mm/10 m
Self-levelling range
± 5° motor-powered, with automatic level control
Accuracy of the slope function
± 0.015%
Setting of slopes in two axes
± 10%, direct entry
Working range Ø
approx. 700 m with receiver COMMANDER2 HVA2N
Laser
< 5 mW, laser class 3R, 635 nm or
< 1mW, laser class 2, 635 nm
Working range radio remote control
approx. 150 m
Optional accessory ’’Accessory package 1’’:
– Elevating tripod, working range 0.80 m to 2.76 m
– Flexi Rod with universal adapter and carrying bag
Working range AutoAlign
approx. 50 m
Rotating speed
10, 60, 300 and 600 rpm
Ref.-No. 210 350
Scanning angle
0°, 5°, 10° und 15°
Protection class
IP 66
Power supply
rechargeable batteries NiMH 4.8 V, 8500 mAh
Operation duration
approx. 100 h
Connecting thread
5/8’’
Optional accessory ’’Accessory package 2’’:
– Elevating tripod, working range 0.78 m to 2.03 m
– Flexi Rod with universal adapter and carrying bag
Ref.-No. 210 351
Nedo Facade Construction Adapters
The Facade Construction Adapters are fastened to the wall and horizontally
aligned with the aid of integrated bubbles. Thanks to the mm graduations
provided on the traverses, rotating lasers and laser receivers can be conveniently
positioned at the required distance from the wall. The new Facade Construction
Adapters have been optimally matched to the fully automatic PRIMUS2 HVA
rotating laser with AutoAlign function and to the COMMANDER2 laser receiver,
and provide in combination with these instruments a professional and complete
system for facade construction.
mm/cm graduation
Adjusting screws
Sturdy aluminium facade construction adapter. Sliding runner with tripod head
and 5/8” connecting thread. Adjusting range approx. 450 mm.
Three adjusting screws allow exact alignment of the facade construction
adapter.
Ref.-No. 461 046
Tube bubble
mm/cm graduation
Facade Construction Adapter for PRIMUS2 Rotating Lasers
Adjusting screws
Facade Construction Adapter for COMMANDER2 Laser
Receivers
Sturdy aluminium facade construction adapter. Sliding runner for accommodating
2
the COMMANDER laser receiver. Adjusting range approx. 490 mm.
Three adjusting screws allow exact alignment of the facade construction
adapter.
Ref.-No. 461 056
Tube bubble
zero mark
Mini-Flexi Rod for Facade Construction
The mini-flexi rod allows distances in facade construction to be measured quickly and easily.
Measurement range: 65 mm to 280 mm
Ref.-No. 461 048
distance
Nedo Batter Board Holder
On modern construction sites the batter board is increasingly being
supplanted by a rotating laser. The laser is, in vertical operation, placed
on a batter board holder fastened to the batter board by a clamping screw.
The batter board holder is provided with a turntable allowing rough alignment of the rotating laser.
The laser receiver with the receiver holder is clamped on the opposite side
of the batter board. Thanks to the AutoAlign function, the laser plane automatically aligns with the laser receiver in the case of the PRIMUS2 HVA
and PRIMUS2 HVA2N models. Furthermore, the laser plane is automatically
monitored and if necessary corrected by the AutoAlign function.
Batter Board Holder for Rotating Lasers PRIMUS2
Sturdy aluminium batter board holder with four clamping screws. Suitable for use with
2
rotating lasers from the PRIMUS series.
Ref.-No. 461 051
Batter Board Holder for Laser Receiver COMMANDER2
Sturdy aluminium batter board holder with one clamping screw. Suitable for use with
2
COMMANDER laser receiver.
Ref.-No. 461 055
2
Nedo Accessories PRIMUS
Telescopic Sight
The use of dual-axis slope lasers requires an extremely exact alignment of the laser axes.
2
With the help of the PRIMUS telescopic sight with integrated target laser the laser axis can
be precisely aligned to the target even if it is a great distance away. The telescopic sight can
2
easily be fixed to the PRIMUS without any tools. Suitable for use with the dual slope lasers
2
PRIMUS H2N, H2N+ and HVA2N.
Ref.-No. 461 096
+
PRIMUS2 Battery Charger
Add-On Kit
PRIMUS2 Battery Box
Spare battery and charger, can be used for
2
all PRIMUS models.
Ref.-No. 461 098
Battery box for 4 x 1.5 V mono-cells, can
2
be used for all PRIMUS models.
Ref.-No. 461 097
Outdoor Package for PRIMUS2 Series
– Aluminium tripod, working range 1.08 to 1.72 m Ref.-No. 200 200
– Flexi Rod with universal adapter and carrying bag
Ref.-No. 200 350
Accessory Package 1 for PRIMUS2 Series
– Elevating tripod, working range 0.80 m to 2.76 m Ref.-No. 210 621
+
– Flexi Rod with universal adapter and carrying bag
Ref.-No. 210 350
Accessory Package 2 for PRIMUS2 Series
– Elevating tripod, working range 0.78 m to 2.03 m Ref.-No. 210 616
– Flexi Rod with universal adapter and carrying bag
Ref.-No. 210 351
PRIMUS2 Tripod
Sturdy aluminium tripod with integrated Quick-Fix locking system.
Technical data:
– Min. effective height: approx. 1.07 m
– Max. effective height: approx. 1.71 m
– Retracted length: approx. 1.15 m
– Weight: approx. 5.00 kg
– Tripod head Quick-Fix, ø 140 mm
Ref.-No. 200 202
2
Nedo Accessories PRIMUS
Nedo Tilt Adapter
With the tilt adapter, inclines of up to 90° can be set manually.
Quick adjustment with 6 stages and additional fine adjustment.
Scale with % and ° units. Ideal for creating slopes or refurbishing roofs.
Incl. circular level, built-in sighting device, 5/8’’ connecting thread and
Quick-Fix system.
Features:
–
–
–
–
–
–
Accuracy: ± 1°
Coarse and fine adjustment for quick height settings
Integrated Quick-Fix system for all lasers in the PRIMUS2 series
5/8’’ thread for all rotating lasers
Scale with degree and percent graduations
Made of high-quality cast aluminium
Ref.-No. 461 047
Nedo Laser Receiver ACCEPTORpro and COMMANDER2
Features ACCEPTORpro
Technical data ACCEPTORpro
–
–
–
–
–
–
–
–
– Accuracy: switchable, ± 0.5 mm, ± 1.0 mm,
± 2.0 mm, ± 4.0 mm
– Length of detector field: 70 mm
– Working range: ø 700 m (depends on laser)
– Protection class IP 66
– Operating temperature: -20°C to +50°C
– Power supply: 3 x 1.5 V batteries (AA) or
rechargeable batteries (NiMH)
– Operation duration: approx. 100 h
Extremely robust laser receiver
Large detector field with 70 mm length
Large LC display on front and back
et water-proof and dust-proof to IP 66
Bright LED display
Adjustable volume
Display of remaining battery power
Rod clamp for laser receiver
Ref.-No. 430 372
Features COMMANDER2
Technical data COMMANDER2
– Laser receiver with integrated radio remote control
– Large LC display on front and back
– Plain-language LCD display showing all the data of
the PRIMUS2 displays
– Jet water-proof and dust-proof to IP 66
– Bright LED display
– Adjustable volume
– Large detector field with 70 mm length
– Display of remaining battery power
– Extremely robust
– Rod clamp for laser receiver
– Accuracy: switchable, ± 0.5 mm,
± 1.0 mm, ± 2.0 mm, ± 4.0 mm
– Length of detector field: 70 mm
– Working range: ø 700 m (depends on laser)
– Protection class IP 66
– Operating temperature: -20°C to +50°C
– Power supply: 3 x 1.5 V batteries (AA) or
rechargeable batteries (NiMH)
– Operation duration: approx. 100 h
2
Ref.-No. 430 371 COMMANDER H2N
2
Ref.-No. 430 374 COMMANDER H2N+
Hochgerichtstrasse 39-43
D-72280 Dornstetten
Phone +49 (0) 7443 24 01-0
Fax
+49 (0) 7443 24 01-45
info@nedo.com
www.nedo.com
Printed in Germany · 11/2015 · NP 321 010-EN
Nedo GmbH & Co. KG
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising