Eliminate Problems Caused by Dry Air

Eliminate Problems Caused by Dry Air
SPECIFICATION GUIDE
CSDS15-NH
Eliminate Problems Caused
by Dry Air
CSDS25-NH
energy
TM
AWARE
Comfort Sentry
Elite Steam Humidifier
TM
PRODUCT DETAILS
FEATURES
•
Model DS15P: 15 GPD
•
Model DS25: 25-35 GPD
•
GFX3 Automatic Digital Display included
•
5.5 lbs/hr of steam
Reduces heating costs
•
Easy to install and minimal maintenance
Protects valuables such as woodwork, furniture, artwork, and electronics
•
Heat treated, reinforced plastic
•
2-Year limited warranty
The Comfort Sentry™ Elite Steam Humidifier introduces steam into
your furnace distribution system, making your indoor air more
comfortable. Research has shown that 40% to 60% relative humidity
is ideal for today’s homes. Outside this range, bacteria, fungi, viruses
and mites thrive, range, bacteria, fungi, viruses and mites thrive.
Proper relative humidity provides a comfortable environment for your
woodwork, furniture, plants, pets, you and your family.
•
•
•
Great for indoor plants and pets
EFFECTS
Element 2
GERMS, BACTERIA
& VIRUSES
The EPA has ranked indoor air pollution
among the top five environment
dangers to the public.
This Product Controls
Sinusitis
Respiratory Infections
Throat & Ear Infection
Bronchitis
Pneumonia
CTERIA & VIR
S, BA
US
RM
E
GE Common Cold Tuberculosis S
Streptococcus
Pneumococcus
RT
FO
T / DISCOM
OR
Humidity/dehumidify
Control
UL
S
XI
C
TO
ATE
S
EFFECTS
Cold & Hot Spots
Asthma Issues
Sleep Problems
Unhealthy / Unsafe
Dryness
HUMIDIFIER
OUND
CO
IC
MP
Wi-Fi & Energy Saving
Toluene
Dirt
Thermostats
Benzene
Mildew
Fresh Air Ventilation
Pesticides
Dust
Temperature Zoning & Control
Tobacco Smoke
Pollen
Throughout Entire House
Nitrogen Dioxide
Smoke
Mold Mycotoxins
Insect Debris
Methylene Chloride
Mold & Fungi
T
Nose & Throat Irritation
Runny Nose
Congestion
Sneezing
Coughing & Wheezing
Asthma Flares
R
PA
DIRT, DUST
& POLLEN
ALLERGENS &
Element 1
EFFECTS
COM
F
Pneumonia
SARS - Influenza
Element 4
HUMIDITY &
TEMP. CONTROL
EFFECTS
Memory Lapse
Mild Depression
Lung Dysfunction
Blurred Vision
Headaches
Lethargy
ENERGY AWARE
APPLICATION
Element 3
TOXIC GASES
& ODORS
•
•
Reduce dry or itchy skin caused by
dry air
More comfortable indoor air that
feels warmer
SPECIFICATION GUIDE
Thermostat Application Guide
5.5 lbs/hr (2.5 kg/h): 110 VAC 1-phase 50-60 Hz, 1.86 kW
Steam flows, VAC, kW
Notes
12 lbs/hr (5.4 kg/h): 230 VAC 1-phase 50-60 Hz, 4.05 kW
Steam pressure
3.81 in WC / 950 Pa
For duct only
Warning
Dimensions (mm )
24” x 14” x 8” (600 x 341 x 204 mm)
Weight empty/packaged/installed with water
(Height x Width x Depth)
18/22/26 lbs. (8/10/12 kg)
12 AWG
If present,
remove the following items:
Electrode power cables
Input water type
Potable water
Conductivity range
LATCH THE CYLINDER CLAMP
Water fill connection
Water fill - instant flow
no demin. or softened water
125-1250 μS/cm
Special cylinders for cond. < 350
1/4” O.D. Compression
Adapter to ¾” FPS
0.09 – 0.16 gpm (0.35 – 0.60 l/min)
REMOVE BEFORE INSTALLING
Drain connection
32 mm O.D. (1.25”)
Drain water temp
< 140°F (< 60°C)
Adjustable from horizontal to vertical.
May be from back or bottom of unit.
drain tempering device
Initial Max drain rate - 7 gpm (26.2 l/min) (w/ full cylinder – for the first 10-15 seconds of
drain cycle)
Drain flow
Average drain rate – 3.1 gpm (11.7 l/min) (measured over a one minute period starting with
REMOVE BEFORE INSTALLING
full cylinder)
Embedded fan flow
71 cfm (120 m³/hr)
Direct Room Discharge Only
Primary 120 / 240 Volts AC
Unit Voltages
Control Wiring 12 Volts DC
Warning
QUICK REFERENCEIf present, remove the following items:
REMOVE BEFORE INSTALLING
LATCH THE CYLINDER CLAMP
REMOVE BEFORE INSTALLING REMOVE BEFORE INSTALLING
REMOVE BEFORE INSTALLING
REMOVE BEFORE INSTALLING
REMOVE BEFORE INSTALLING
INSTALLATION NOTES
Elite Steam +030222075 Rev. 4.0 – 2 Mar. 2015
1
REMOVE BEFORE INSTALLING
1.
2.
Choose suitable location on wall for mounting, one that is close the point that the steam will be used.
3.
Supply un-softened water to the unit using a soft poly hose and tubing support. The fitting threads into the fill valve inlet location on the bottom of the
humidifier using a ¾” G connection.
4.
5.
6.
Drill the wall according to the drilling template supplied. Remove the 4 corner screws to remove the front cover. Secure Elite Steam firmly to the wall using the
screws and anchors supplied, and re-attach the front cover.
Route the drain line out of the back or bottom of the unit using the included angle fitting.
Run the steam hose. When running the hose, remember that steam flows uphill, and condensate flows downhill. Run the hose in such a way that the steam
can flow to the distributor pipe and the condensate can run back to the unit.
Wire unit in accordance to local eclectic codes and the rating plate inside the unit.
SAFETY NOTES
•
•
Always disconnect the main power before opening or servicing the humidifier.
1
Steam +030222075 Rev. 4.0 – 2 Mar. 2015
ScaldingElite
hazard:
The humidifier has hot parts (100°C/ 212°F)
REMOVE BEFORE INSTALLING
© 2017 Clockwork IP, LLC, 4-2016 | www.natureshomeproducts.com
CSDS15-NH
-CSDS25-NH
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising