Eaton ATF-1200-YP-3.3 AC/DC Front End

Eaton ATF-1200-YP-3.3 AC/DC Front End
1200W Front End Power
ATF-1200-12-Y-P-3
Cloud computing
High performance servers
Routers and switches
Storage
1200W Front End Power
Eaton introduces the new AC 80-plus platinum certified
front end power supply ATF-1200-12-Y-P-3.
Featuring hot pluggable, N+1 redundant and power
factor corrected capabilities, the high power density
AC front end power with multiple output is ideal for
cloud computing, high performance servers, routers,
switches, storage or any other application requiring 24/7
performance operation.
Eaton’s ATF-1200-12-Y-P-3 front end power employs
full digitally controlled bridgeless boost PFC stage,
highly optimized LLC converter stage and synchronous
rectification to achieve high power density and high
efficiency that modern systems can benefit from.
Features
•
80 PLUS certified “Platinum” efficiency
•
Wide input voltage range: 90-264 VAC
•
AC input with power factor correction
•
Always-on standby output 3.3V standard, 5V available upon request
•
Hot-plug capability
•
Parallel operation with active digital current sharing
•
Full digital controls for optimum performance
•
High density design: 29.0 W/in3
•
Small form factor: 2.1in x 1.6in x 12.6in
•
I2C communication interface for control, programming and
monitoring with PSMI protocol
•
Over temperature, output overvoltage and overcurrent protection
•
256 Bytes of EEPROM for user information
•
Two status LEDs: AC OK and DC OK with fault signaling
For a free sample and feasibility
discussion of your application, please
contact Eaton at 310-542-8561x4276
Power factor chart
Efficiency performance overall
1.005
1.000
0.995
Efficiency [%]
Power Factor
0.990
0.985
0.980
0.975
Power Factor Vi=230Vac
0.970
0.965
0.960
0.955
0.950
0
10
20
30
40
50
60
70
Load Current [A]
80
90
100
97.0%
96.5%
96.0%
95.5%
95.0%
94.5%
94.0%
93.5%
93.0%
92.5%
92.0%
91.5%
91.0%
90.5%
90.0%
Vi=230Vac, Fan Internal, No SB Power
Vi=230Vac, Fan External, No SB Power
1
3
5
7
9
11
13
15
Load Current [A]
17
19
Mechanical specifications
Parameter
Dimensions
Construction
RoHS & WEEE
Weight
Cooling
Hot swap
Mounting
Specification
2.1in x 1.6in x 12.6in
Combination of stamped steel case with steel front panel
Compliant
2.25lbs
Fan forced - temperature controlled
Hot swappable without disturbance to input/output lines
Rack mount in custom sub-rack
Comments
See mechanical drawing for details
1x 1.42in fan
Horizontal and vertical mounted
Mechanical dimensions - inches (mm)
1.969 [50.00] 2.146 [54.50]
2.146 [54.50]
±.020 [.50]
1.575 [40.00]
TOP VIEW
.110 [2.80]
.260 [6.60]
.087
[2.20]
1.575 [40.00]
±.020 [.50]
SIDE VIEW
.535 [13.60]
12.598 [320.00]
.373 [9.48]
BACK VIEW
2
EATON CORPORATION 1200W Front End Power
FRONT VIEW
21
Output connector & control signal
E
1
2
3
4
5
6
7
8
9
10
D
C
B
A
Unit: Tyco Electronics 1926736-3 / FCI 10121382-R10253SLF
Mating connector: Tyco Electronics 1926739-5 / FCI 10108888-R10253SLF
Pin
Output
6, 7, 8, 9, 10
1, 2, 3, 4, 5
Control pins
A1
B1
C1
D1
E1
A2
B2
C2
D2
E2
A3
Name
Description
12V
12VRTN
+12VDC main output
+12VDC power ground (return)
3.3V
3.3V
3.3V
3.3V
3.3V
SGND
SGND
HOTSTANDBYEN
3.3V
3.3V
APS
3.3V standby positive output
3.3V standby positive output
3.3V standby positive output
3.3V standby positive output
3.3V standby positive output
Signal ground (return)
Signal ground (return)
Hot standby enable signal: active-high
3.3V standby output sense return
3.3V standby output sense
I2C address and protocol selection
Parameter
PSKILL / PSON / HOTSTANDBYEN Inputs
VIL
Input Low Level Voltage
Pin
B3
C3
D3
E3
A4
B4
Name
N/C
SDA
12V_SENSE_R
12V_SENSE
SCL
PSON
C4
D4
E4
A5
B5
C5
D5
E5
SMB_ALERT
N/C
ACOK
PSKILL
ISHARE
PWOK
N/C
PRESENT
Condition/Description
Min
Max
Unit
-0.2
0.8
V
2.4
3.5
V
1
mA
1
kΩ
kΩ
kΩ
kΩ
VIH
Input High Level Voltage
IIL, H
Maximum Input Sink or Source Current
RpuPSKILL
RpuPSON
RpuHOTSTANDBYEN
RLOW
Internal Pull Up Resistor on PSKILL
Internal Pull Up Resistor on PSON
Internal Pull Up Resistor on HOTSTANDBYEN
Resistance Pin to SGND for Low Level
0
RHIGH
Resistance Pin to SGND for High Level
50
PWOK Output
VOL
Output Low Level Voltage
Nom
Description
Reserved
I2C data signal line
Main output negative sense
Main output positive sense
I2C clock signal line
Power supply on input (connect to A2/B2 to turn unit
on): active-low
SMB Alert signal output: active-low
Reserved
AC input OK signal: active-high
Power supply kill (lagging pin): active-high
Current share bus (lagging pin)
Power OK signal output (lagging pin): active-high
Reserved
Power supply present (lagging pin): active-low
0
100
10
10
kΩ
0
0.4
V
VOH
RpuPWOK
ACOK Output
VOL
VOH
Output High Level Voltage
Internal Pull Up Resistor on PWOK
Isink < 4mA
Isource < 0.5mA
2.6
3.5
V
kΩ
Output Low Level Voltage
Output High Level Voltage
Isink < 2mA
Isource < 50μA
0
2.6
0.4
3.5
V
V
RpuACOK
Internal Pull Up Resistor on ACOK
1
10
kΩ
SMB_ALERT Output
Vext
VOL
Maximum External Pull Up Voltage
Output Low Level Voltage
IOH
RpuSMB_ALERT
Maximum High Level Leakage Current
Internal Pull Up Resistor on SMB_ALERT
Isource < 4mA
0
None
12
0.4
V
V
10
μA
kΩ
EATON CORPORATION 1200W Front End Power
3
Input Specification
Parameter
Vi nom
Vi rated
Vi
Vi red
I max
Ip
Fi
PF
THDi
Vi on
Vi off
η
Nominal input voltage
Rated input voltage Range
Input voltage ranges
Low line input voltage range
Max input current
Inrush current limitation
Input frequency
Power factor
Total Input Current Harmonic Distortion
Turn-on input voltage
Turn-off input voltage
Efficiency
T hold
Hold-up Time
Conditions/Description
Min
Normal operating (Vi min to Vi max)
Derated output (600W output power)
100
90
90
Nom
120 / 230
Vi min to Vi max, 90°, TNTC=25°C
Vi nom, 50Hz, >0.2 I1 nom
From 50%-100% of rated output power at nominal input voltage
Ramping up
Ramping down
Vi nom, 0.1 ∙I1nom, 0.1 ∙ISB nom, TA=25°C
Vi nom, 0.2 ∙I1nom, 0.2 ∙ISB nom, TA=25°C
Vi nom, 0.5 ∙I1nom, 0.5 ∙ISB nom, TA=25°C
Vi nom, I1 nom, ISB nom, TA=25°C
After last AC zero point, V1>10.8V, VSB within regulation, Vi=230
VAC, P x nom
47
0.96
50/60
Max
240
264
135
8
40
64
5
87
85
80
75
90
94
95.5
92
12
Unit
VAC
VAC
VAC
VAC
Arms
Ap
Hz
W/VA
%
VAC
VAC
%
%
%
%
ms
Output specification
Parameter
Main Output V1
V1 nom
Nominal Output Voltage
P1 nom
Nominal Output Power
I1 nom
Nominal Output Current
P1 nom
Nominal Output Power
I1 nom
Nominal Output Current
V1 pp
Output Ripple Voltage
dV1
Total Regulation
Nshare
Redundant parallel operation unit number
dIshare
Current Sharing
dVdyn
Dynamic Load Regulation
Conditions/Description
0.5 ∙I1 nom, Tamb = 25 °C
V1 = 12 VDC (180-264 VAC)
V1 = 12 VDC (180-264 VAC)
V1 = 12 VDC (90-135 VAC)
V1 = 12 VDC (90-135 VAC)
V1 nom, I1 nom, 20MHz BW
Vi = Vi min~~ Vi max, 0 - 100 % I1 nom
Deviation from I1 tot / N, I1 > 10% *I nom
ΔI1 = 50% I1 nom, I1 = 5…100% I1 nom,dI1/dt = 1A/μs, recovery
within 1% of V1 nom
Trec
Recovery Time
tAC V1
Start-up Time from AC
V1 = 90% V1 nom
V1 = 10…90% V1 nom
Rise Time
tV1 rise
CLoad
Capacitive Loading
Ta = 25°C
Standby Output VSB: 3.3V standard, 5V available upon request
VSB nom
Nominal output voltage
0.5∙ISB nom, Tamb = 25 °C
PSB nom
Nominal output power
ISB nom
Nominal output current
VSB PP
Output ripple voltage
VSB nom, ISB nom, 20MHz BW
dVSB
Droop
0-100% ISB nom.
d VSB dyn Dynamic load regulation
ΔI1 = 50% ISB nom, ISB = 5…100% ISB nom, dI0/dt = 0.5 A/μs,
recovery within 1% of V1 nom
Trec
Recovery time
tAC VSB
Start-up time from AC
VSB=90% VSB nom
tVSB res
Rise time
VSB=10…90% VSB nom
CLoad
Capacitive loading
Tamb =25 °C
4
EATON CORPORATION 1200W Front End Power
Min
Nom
Max
Unit
150
2.0
6.0
5.0
0.6
VDC
W
ADC
W
ADC
mVpp
%V1 nom
PCS
% I1 nom
V
4.0
2.0
20
30,000
ms
sec
ms
uF
12
1,200
100
600
50
-2
0
-5
-0.6
3.3
3.3
1.0
3.0
VDC
W
ADC
mVpp
mV
% VSB nom
1.0
2.0
20
10,000
ms
sec
ms
μF
100
67
-3
4.0
Electromagnetic compatibility
1. Immunity
Parameter
ESD Contact Discharge
ESD Air Discharge
Radiated Electromagnetic Field
EFT
Surge
RF Conducted Immunity
Voltage Dips and Interruptions
Conditions/Description
IEC / EN 61000-4-2, ±8kV, 25+25 discharges per test point
(metallic case, LEDs, connector body)
IEC / EN 61000-4-2, ±15kV, 25+25 discharges per test point
Criterion
B
(non-metallic user accessible surfaces)
IEC / EN 61000-4-3, 10V/m, 1kHz/80% Amplitude Modulation, 1 us Pulse Modulation, 80MHz…2GHz
IEC / EN 61000-4-4, level 3
AC port ±4kV, 1 minute
DC port ±1kV, 1 minute
IEC / EN 61000-4-5
Line to earth: level 3, ±2kV
Line to line: level 2, ±1kV
IEC/EN 61000-4-6, Level 3, 10Vrms, CW, 0.1 … 80 MHz
IEC/EN 61000-4-11
1: Vi 230 V, 100% Load, Phase 0°, 0% during ½ cycle
2: Vi 230 V, 100% Load, Phase 0°, 0% during 1 cycle
3: Vi 230 V, 100% Load, Phase 0°, 40% during 10/12 cycles
4: Vi 230 V, 100% Load, Phase 0°, 70% during 25/30 cycles
5: Vi 230 V, 100% Load, Phase 0°, 80% during 250/300 cycles
B
B
B
B
B
VSB: A, V1: A
VSB: A, V1: B
VSB: A, V1: B
VSB: A, V1: B
VSB: A, V1: A
2. Emissions
Parameter
Conditions/Description
Criterion
Class A
6 dB margin (typical)
Conducted Emission
EN55022/FCC/CISPR 22: 0.15 … 30 MHz, QP and AVG, single unit
Radiated Emission
EN55022/FCC/CISPR 22: 30 MHz … 1 GHz, QP, single unit
Harmonic Emissions
Acoustical Noise
AC Flicker
IEC61000-3-2, Vin = 100 VAC /120VAC/ 60 Hz, 50% Load & Vin = 230VAC/240VAC/ 50 Hz, 100% Load
Sound power statistical declaration(ISO 9296,ISO 7779,IS9295), (at 1 meter, 25C, 50% load)
IEC61000-3-3, dmax<3.3%
6 dB margin (typical)
Class A
46dB
Pass
Parameter
TA
Ambient temperature
Ts
Storage temperature
Conditions/Description
Vi min to Vi max,I1 nom, ISB nom
Non-operational
Min
0
-20
Max
55
70
Unit
°C
°C
To
Operating Temperature
Normal work/Derating will apply for above 50°C
-10
70
°C
Maximum Altitude
For Normal operation
10,000
Feet
Maximum Altitude
For Non-operation
35,000
Feet
IP requirement
No conformal coating
Class 2
Humidity
Relative humidity, non-condensing, both operating and non-operating.
Class A
Environmental
Hum
5
Nom
95
%
LED display
Operation Condition
AC LED
LED Signaling
AC Line within range
AC Line Fail (<75V)
AC line over range (OV & UV)
DC LED
PSON High
Hot-Standby Mode
V1 out of regulation
Over temperature shutdown
Output over voltage shutdown (V1)
Output over current shutdown (V1)
Fan fail
Over temperature warning
Solid Green
Off
Blinking Green(1:1)
Blinking Yellow (1:1)
Blinking Yellow/Green (1:2)
Solid Yellow
Blinking Yellow/Green (2:1)
EATON CORPORATION 1200W Front End Power
5
Eaton
1000 Eaton Boulevard
Cleveland, OH 44122 USA
Eaton.com
Eaton's embedded power soultions
10995 SW Avery Street
Tualatin, OR 97062
© 2016 Eaton
All Rights Reserved
Printed in USA
Oct 2016
Eaton is a registered trademark
of Eaton Corporation.
All other trademarks are property
of their respective owners.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising