industrial network solutions

industrial network solutions
Ethernet / LAN
Extension
ADSL2+ / VDSL
Solutions
(For Copper, Fiber, & Wireless)
INDUSTRIAL
NETWORK
SOLUTIONS
Power Over
Ethernet (PoE) &
FIBER (PoF)
Telephone &
Demark Extension
(T1, T3, E1, DS1, DS3,
POTS, FXS &FXO)
Channel
Banks
Industrial
Modems
Serial Data &
Modem Extension
(Over Copper, Fiber, & Wireless)
Call 1.888.4WANLAN
www.dataconnectus.com
Industrial
Servers & Switches
Headquartered in Olney, Maryland, near Washington,
DC, Data Connect manufactures reliable networking and com-2
munications products. We have offices serving major metropolitan areas throughout the country as well as substantial international penetration with distributors around the world. Specializing in networking and communications technologies, Data Connect provides a wide range
of solutions to wire-line and wireless applications in data, voice and video transmission.
Data Connect specializes in industrial grade, temperature rated, and hardened communications solutions. We produce a wide range of industrial Ethernet, industrial wireless,
and industrial modem products used extensively in both trailing-edge and leading-edge applications. Data Connect is well equipped to help businesses, VARs, and systems integrators looking for reliable networking solutions. Ask Data Connect for help in both your
existing legacy network applications and in your new networks using state-of-the-art integrated solutions.
SYSTEMS SOLUTIONS: All Data Connect recommendations are made with system integrity in mind. We may ask
a few more questions about your application, but this is done to ensure the right solution for your requirement.
MAINTENANCE AND REPAIR SERVICES: Data Connect offers repair services, warranty enhancements, installation services, site surveys, and consulting services for wireless, wire-line, voice, data, video, and converged
network products and applications. We offer fixed price maintenance contracts for a wide range of equipment.
Maintenance contracts and exclusive programs help you control downtime and budgets. Maintenance contracts
and exclusive money saving programs can lower your costs while saving you time.
TOTAL PREMISE SOLUTIONS: We are able to recommend, design, deliver, implement and service a broad
range of network and connectivity solutions within specific and unique environments. In addition to supplying
premise equipment and wiring, Data Connect provides a full range of data and voice premise services. These services include custom patch cabling, wiring upgrades, dressing of existing cabling and cabinets and complete computer room relocations-all within applicable code and cutover deadlines
EXPRESS DELIVERY: In addition to traditional freight services, Data Connect provides personal delivery for
emergency requirements whenever possible. Orders for stock items are rushed and filled the day they are plac
ed. Special order and custom terms are expedited to meet customer deadlines.
GUARANTEE: All standard stock products are backed by Data Connect's reliability guarantee. Any DOA unit will
be exchanged from Data Connect's stock for an immediate brand new replacement unit. In addition, if the item
ordered does not completely satisfy your requirement, simply notify us within 15 days of purchase and we will
swap out the unit for the correct product. Most Data Connect products come with 1-year, 2-year, or 5-year as
well as lifetime warranties.
WARRANTIES: Please ask about extended warranty options.
NO SALES ARE FINAL: Since NO SALES ARE FINAL, you can return any item that you have purchased
from DATA CONNECT. Returns of items after 30 days from the date of shipment should, but may not necessarily,
result in a credit. The determination of the restocking fee to be applied will be made by the DATA CONNECT RMA
Department based upon the age of the unit, its condition, the unit’s state of obsolescence, product.
2
TABLE OF CONTENTS
3
ETHERNET / LAN EXTENSION
DIAL LINE & DEMARC EXTENSION
COPPER ETHERNET EXTENSION
Extend Ethernet Circuits to 6,232ft
Minus 40 to Plus 75 Degrees Celsius
NEMA TS1 TS2 Environment Requirements
Four Ethernet Devices over 2-Wire
5 Mbps at 1.8 Miles
11 Mbps at 1.8 Miles
22 Mbps at 1.8 Miles
100 Mbps Down-stream / Upstream
6
7
8
10
11
11
11
Fiber Telephone Station Extender
15
60
T1, E1, DS1, T3 & DS3 EXTENSION
Copper T1/E1/DS1 Extender
Fiber T1/E1/DS1 Extender
Quad Fiber T1/E1
Fiber T3/E3/DS3 Extender
RM20UI Chassis Series
12
COAX ETHERNET EXTENSION
Extend Ethernet Circuits over
COAX
TELEPHONE EXTENSION/ FXS, FXO, & POTS
61
62
63
64
65
CHANNEL BANKS
D4 CHANNEL BANK PAGES 69-71
Selectable FXO/FXS Channel Bank
70
FIBER ETHERNET EXTENSION
Extend Ethernet Circuits over Fiber
16
WIRELESS ETHERNET EXTENSION
500 Mbps to 500 ft
300 Mbps to 500 ft / 5 mbps at
5Miles
17
19
VDSL2 & ADSL2+ SOLUTIONS
VDSL2 SOLUTIONS
1-Port VDSL2 Bridge Modem
4-Port VDSL2 Bridge Modem
4-Port VDSL2 Modem Router
4-Port VDSL2 Wireless N Router
24
27
28
30
VDSL DSLAM
8-Port VDSL SNMP Switch 2-SFP
24-Port VDSL DSLAM 2-SFP
24-Port VDSL DSLAM 2-SFP 48VDC
48-Port VDSL DSLAM 2-SFP
48-Port VDSL DSLAM 2-SFP 48VDC
32
35
35
35
35
ADSL2+ SOLUTIONS
1-Port ADSL2+ Bridge Modem
1-Port ADSL2+ Modem Router
4-Port ADSL2+ 802.11G Router
48-Port ADSL2+ DSLAM
24-Port ADSL2+ DSLAM
DSL-Filter
DSL-Splitter
38
39
40
42
44
46
47
INDUSTRIAL MODEMS
V.92 &V.90 56KBPS
V.34.BIS 33.6KBPS
V.34 28.8KBPS
19.2 & 9.6 HFP, V.29 & V.27 1.2 - 19.2KBPS
V.32BIS 14.4KBPS
V.22 2.4KBPS
V.23 1.2KBPS
BELL202T,R38 MULTIPROTOCOL 0-1800BPS
74-79
80-89
90-95
96-99
100-117
118-127
128-129
130-137
SERIAL DATA & MODEM EXTENSION
SERIAL DATA COPPER MODEM
Industrial Grade 202T 1.2K Series
Industrial Grade 202T R38 0-1-2K
MIU 202T 1.2K Series
202TE-037-4 1.2K Series
Industrial Grade 9.6K Series
MIU 9.6FPD Series
MIU14.4L Series
Industrial Grade 19.2K Series
V.3600LP Series
V.3600UI Series
141
142
143
147
148
150
154
159
160
162
WIRELESS SERIAL DATA EXTENSION
SWM910A Series
163
SERIAL DATA FIBER EXTENSION
Low Speed Serial Fiber Modem
High Speed Serial Fiber Modem
Super High Speed Serial Fiber Modem
POWER OVER ETHERNET
(POE) & FIBER (POF)
COPPER POWER OVER ETHERNET (POE)
48VDC POE 10/100
48VDC POE 10/100/1000
Analog Telephone Adapter
48VDC POE 12-Port Hub
50
51
52
54
FIBER POWER OVER ETHERNET (POF)
48VDC (POF) 10/100/1000
55
POE SURGE SUPPRESSOR
60V POE Surge Suppression
56
164
165
165
INDUSTRAIL SERVERS & SWITCHES
ETHERNET SERIAL SERVERS
1-2 Port Serial to Ethernet Con-
168
4-Port Serial to Ethernet Converter
169
INDUSTRIAL GRADE SWITCHES
Industrial Advance 5-Port Switch
Industrial Advance 8-Port Switch
170
171
3
INDUSTRIAL SOLUTIONS
NETWORK ANYWHERE
MODEL
MAX. DISTANCE
ETHERNET EXTENDERS
ETHERNET EXTENDER DISTANCE CHECK LIST
4
MAX.
SPEED
DISTANCE AT
MAX. SPEED
RACK
MOUNT
DIN
MOUNT
PHOTO
PAGE 2178EE
6,232 FEET
(Copper
50MBPS
Wire)
900 FEET
YES
YES
6 2178HEE
(Hardened)
6,232 FEET
(Copper
50MBPS
Wire)
900 FEET
YES
YES
7 2178MDEE
(Multi-Drop)
6,232 FEET
PER DROP
50 MBPS
(Copper
Wire)
900 FEET
YES
YES
8 2178MPEE
(Multi-Point)
6,232 FEET
(Copper
50 MBPS
Wire)
900 FEET
YES
YES
10 2178LRE-1
(Long Reach)
4.9 MILES
(Copper
Wire)
5 MBPS
1.8 MILES
NO
NO
11 2178LRE-2
(Long Reach)
4.9 MILES
(Copper
Wire)
11 MBPS
1.8 MILES
NO
NO
11 2178LRE-4
(Long Reach)
4.9 MILES
(Copper
Wire)
22 MBPS
1.8 MILES
NO
NO
11 2178HSEE
(High Speed)
4,593 FEET
(Copper
Wire)
100
MBPS
900 FEET
YES
NO
12 2178CEE
(Coax)
7,784 FEET
(Coax or
Telephone
Wire)
100
MBPS
655 FEET
NO
NO
15 UNLIMITED
NO
NO
16 150
MBPS
900 FEET
NO
NO
17 300
MBPS
.5 MILES
NO
NO
19 2178FEE
(Fiber)
2178WEE
(Wireless)
74.5 MILES (MM, SM, or 100 MBPS WDM Fiber) 5,000 FEET
(Wireless N)
25 MILES
4
2178HPWEE
LINE OF
(High Power SITE (LOS)
Wireless)
(Wireless N &
HP Antenna)
INDUSTRIAL SOLUTIONS
NETWORK ANYWHERE
5
ETHERNET EXTENDERS
IN THIS SECTION & THE TECHNOLOGY
ETHERNET / LAN EXTENSION
In this Section
Extend Ethernet Circuits up to 6,232 Feet
-40 to +75 Degrees Celsius
NEMA TS1 & TS2 Environmental Requirements
Up to 4 Ethernet Devices over 2-Wire
5 Mbps at 1.8 Miles
11 Mbps at 1.8 Miles
22 Mbps at 1.8 Miles
100 Mbps Downstream / Upstream
Extend Ethernet Circuits over Coax
Extend Ethernet Circuits over Fiber
Extend Ethernet Circuits over Wireless 100 Mbps to 500 ft
Extend Ethernet Circuits over Wireless 5 Mbps at 25 Miles
Pg 6
Pg 7
Pg 8
Pg 10
Pg 11
Pg 11
Pg 11
Pg 12
Pg 15
Pg 16
Pg 17
Pg 19
The Technology
Ethernet extension allows users to expand their Ethernet connections beyond the 328-foot (100-meter) Ethernet distance limitations. Ethernet extenders
can establish long-range, high-speed data communication links between geographically separated LANs or LAN devices. Ethernet extenders are often employed to connect workgroups on different floors within a building.
One benefit of Ethernet extenders is they can eliminate the need for installing expensive Switches and CAT5 cable. Ethernet extenders can use fiberoptic, coax, wireless, or copper twisted-pair cables to transparently send packets at full-line rate to a peered LAN up to twenty-five miles away. While networks typically deploy Ethernet extenders within a limited geographical area,
this area need not be limited to one building. Ethernet extenders can create effective bridged-Ethernet connections across streets or over a college or enterprise campus and between Ethernet LANs up to twenty-five miles apart.
Ethernet extenders are cost-effective alternatives to more complicated and
pricey wiring installations such as CAT5 cable. Ethernet extenders are plugand-play devices that you can install quickly to take advantage of existing copper twisted-pair network infrastructure. Depending on the required data rate,
some Wireless Ethernet extender models can increase the distance of an
Ethernet link up to twenty-five miles with Line Of Site (LOS).
At Data Connect, we offer a wide range of award-winning Ethernet Extenders to serve your networking needs, including copper, coax, fiber, and wireless
models. Our auto-rate adaptation feature ensures the highest speed possible
across great distances. Unlike many LAN extenders, Data Connect extenders
with auto-rate adaptation can be set for multiple data rates and require no diffi5
cult configuration when connecting to LANs at different distances.
INDUSTRIAL SOLUTIONS
NETWORK ANYWHERE
ETHERNET EXTENDERS
COPPER ETHERNET EXTENDERS
6
DCE 2178EE
DISTANCE CHART
NOTE: All speed selections are Symmetrical on
the DSL and Full-duplex on the Ethernet.
1
2
The 2178EE is a point-to-point Industrial Ethernet Extender that
efficiently extends 10/100 Ethernet circuits up to 6,232 feet and
supports speeds from 1Mbps to 50Mbps using existing straight
pair copper wire. The 2178EE will allow Ethernet connectivity in
existing facilities without pulling extra cable.
This is the perfect solution to Ethernet on the factory floor where
systems have been upgraded from slower serial communications to Ethernet networking. Applications are endless; all that
is needed is access to copper pairs. Installation is easy with a
single switch setting; one end is set for local and the other remote. The 2178EE is used in pairs to extend Ethernet connectivity over existing voice grade copper wire.
SPECIFICATIONS
Technology
Standards: IEEE802.3 10Base-T, IEEE802.3u 100Base-TX, IEEE802.3x,
Ethernet over VDSL
Protocols: Transparent to higher layer protocols
Processing Type: Half-duplex back-pressure and IEEE802.3x Full-duplex flow
control
Power
Input: Input Voltage: 12VDC
Power Consumption: 2.4W Max._ 0.2A@12VDC
Mechanical
Casing: Aluminum case
Dimensions: 80.3mm (W) x 109.2mm (D) x 23.8mm (H); (3.16" (W) x 4.30" (D)
x 0.94" (H))
Weight: 150g (0.33lb.)
Installation: DIN-Rail, Wall Mounting
Interface
Ethernet Port: Port: One RJ-45 port, 10/100Base-TX Full/Half-duplex, AutoNegotiation, Auto-MDI/MDIX
Speed: 10/100Mbps
Distance: 100meters (328ft.)
Cable: 10Base-T: UTP CAT. 3, 4, 5 (2-pair wire) & 100Base-TX: UTP CAT. 5 (2
-pair wire)
Ethernet Extension Port
Port: One RJ-11 Port
Speed: 1/3/5/10/15/20/25/30/40/50mbps
Distance: 1900meters (6,232ft.)
Cable: Telephone line 24 AWG (0.5mm diameter, 1-pair wire) or larger
DIP Switch: One DIP switch: Local (CO) or Remote (CPE)
LED Indicators: Per Unit: Power Status (Power), 10/100TX: Link/Activity,
Full-duplex & Line: Error, Link, Local, Remote
Environment
Operating Temperature: -20°C to 60°C (-4°F to 140°F)
Storage Temperature: -20°C to 70°C (-4°F to 158°F)
Ambient Relative Humidity: 5% to 95% (non-condensing)
3
4
4&2
4&3
LED
Green
Amber
Green
Amber
Green
Amber
Green
Amber
Amber
Amber
SPEED
1Mbps
3Mbps
5Mbps
10Mbps
15Mbps
20Mbps
25Mbps
30Mbps
40Mbps
50Mbps
DISTANCE
1,900m (6,232 ft)
1,800m (5,904 ft)
1,600m (5,249 ft)
1,400m (4,593 ft)
1,200m (3,936 ft)
1,000m (3,280 ft)
800m (2,624 ft)
700m (2,296 ft)
600m (1,968 ft)
300m (984 ft)
FEATURES










Operates transparent to higher layer protocols such as TCP/IP
Ethernet Port: 10/100Mbps-Full/Half-duplex, Auto-Negotiation, Auto-MDI/
MDIX
Ethernet Extender (RJ-11) Port: Symmetrical on the VDSL
High speed Full-duplex 50Mbps communications link over existing copper facilities
Support DIP switch to select Local or Remote side
Ten speeds with speed indicator LEDs on top of unit,
Up to 50 Mbps @ about 300 meters (984 ft) & down to 1 Mbps @ about
1,900 meters (6,232 ft)
-20°C to 60°C (-4°F to 140°F) operating temperature range
Industrial Hardened aluminum case
Supports DIN-Rail, Wall Mounting installation or expansion use with our
media converter chassis system
ODERING INFORMATION
DCE/2178EE
DCE/2178EE-2PK
DCE/2178EE-DIN
Data Connect 10/100Base-TX
Industrial Ethernet Extender
Data Connect 10/100Base-TX
Industrial Ethernet Extender,
2-Pack
Data Connect DIN rail mount kit
APPLICATION
6
DATA CONNECT ENTERPRISE
PHONE: 301.924.7400 EXT 17
3405 OLANDWOOD CT
FAX: 301.924.7403
OLNEY, MD 20832
USA
www.data-connect.com
INDUSTRIAL SOLTIONS
NETWORK ANYWHERE
ETHERNET EXTENDERS
HARDENED COPPER ETHERNET
7
DCE 2178HEE
The Data Connect 2178HEE is a point-to-point Industrial
Ethernet Extender designed to operate in harsh environments that efficiently extends 10/100 Ethernet circuits
up to 6,232 feet and supports speeds from 1Mbps to
50Mbps using existing crossover pair copper wire. The
2178HEE function sat temperatures ranging from -40°C
to 75°C (-40°F to 167°F) and is tested for functional operation @ -40°C to 85°C (-40°F to 185°F). The 2178HEEwill allow Ethernet connectivity in existing facilities without pulling extra cable. This is the perfect solution to
Ethernet on the factory floor where systems have been
upgraded from slower serial communications to Ethernet
networking.
REGULATORY APPROVALS
Regulatory Approvals ISO: Manufactured in an ISO9001 facility
Safety: UL60950-1, EN60950-1, IEC60950-1EMI: FCC Part 15,
Class A EN61000-6-3
EN55022
EN61000-3-2
EN610003-3EMS: EN61000-6-2
EN61000-4-2 (ESD Standards)
Contact: + / - 4KV; Criteria B
Air: + / - 8KV; Criteria B
EN61000-4-3 (Radiated RFI Standards) 10V/m, 80 to 1000MHz;
80% AM Criteria A
EN61000-4-4 (Burst Standards)
Signal Ports: + / - 4KV; Criteria
B
D.C. Power Ports: + / - 4KV; Criteria B
A.C. Power Ports:
+ / - 4KV; Criteria B
EN61000-4-5 (Surge Standards)
Signal Ports: + / - 1KV; Line-to
-Line; Criteria B
D.C. Power Ports: + / - 0.5KV; Line-to-earth;
Criteria B
A.C. Power Ports: + / - 2KV; Line-to-earth; Criteria B
EN61000-4-6 (Induced RFI Standards)
Signal Ports: 10Vrms @ 0.15~80MHz; 80% AM Criteria A
D.C. Power Ports: 10Vrms @ 0.15~80MHz; 80% AM Criteria A
A.C. Power Ports: 10Vrms @ 0.15~80MHz; 80% AM Criteria A
EN6100030A/m @ 50, 60Hz; Criteria A
EN61000-4-11 (Voltage Dip Standards)
A.C. Power Ports: 30% Reduction for 0.5 period; Criteria B
Environmental Test Compliance:
IEC60068-2-6 Fc (Vibration Resistance) 5g @ 10~150KHz, Amplitude 0.35mm (Operation/Storage/Transport)
IEC60068-2-27 Ea (Shock) 25g @ 11ms (Half-Sine Shock Pulse;
Operation) 50g @ 11ms (Half-Sine Shock Pulse; Storage/
Transport)
FEATURES

SPECIFICATIONS

Technology
Standards: IEEE802.3 10Base-T, IEEE802.3u 100Base-TX, IEEE802.3x,
Ethernet over VDSL
Protocols: Transparent to higher layer protocols
Processing Type: Half-duplex back-pressure and IEEE802.3x Full-duplex
flow control
Power
Input: Input Voltage: 12-30VDC
Power Consumption: 2.4W Max._ 0.2A@12VDC
Mechanical
Casing: Aluminum case
Dimensions: 50mm (W) x 110mm (D) x 135mm (H); (1.97" (W) x 4.33" (D) x
5.31" (H))
Weight: .8kg (1076lbs.)
Installation: DIN-Rail, Wall Mounting
Interface
Ethernet Port: Port: One RJ-45 port, 10/100Base-TX Full/Half-duplex, Auto
-Negotiation, Auto-MDI/MDIX
Speed: 10/100Mbps
Distance: 100meters (328ft.)
Cable: 10Base-T: UTP CAT. 3, 4, 5 (2-pair wire) & 100Base-TX: UTP CAT. 5
(2-pair wire)
Ethernet Extension Port
Port: One RJ-11 Port
Speed: 1/3/5/10/15/20/25/30/40/50mbps
Distance: 1900meters (6,232ft.)
Cable: Telephone line 24 AWG (0.5mm diameter, 1-pair wire) or larger
DIP Switch: One DIP switch: Local (CO) or Remote (CPE)
LED Indicators: Per Unit: Power Status (Power), 10/100TX: Link/Activity,
Full-duplex & Line: Error, Link, Local, Remote
Environment
Operating Temperature: -20°C to 60°C (-4°F to 140°F)
Storage Temperature: -20°C to 70°C (-4°F to 158°F)
Ambient Relative Humidity: 5% to 95% (non-condensing)







Complies with NEMA TS1 & TS2 Environmental requirements for Traffic control equipment
Complies with IEC61000-6-2 EMC Generic standard immunity for Industrial environment
Operates transparent to higher layer protocols such as
TCP/IP Support DIP switch to select Local or Remote side
Redundant power inputs with Terminal Block and DC Jack
Ten speeds with speed indicator LEDs on top of unit
Ethernet Port: 10/100Mbps-Full/Half-duplex, AutoNegotiation, Auto-MDI/MDIX
Ethernet Extender(RJ-11 and Terminal Block) Port
Hardened aluminum case
Supports DIN-Rail or Panel Mounting installation
ORDERING INFORMATION
2178HEE
2178HEE-2PK
2178HEE-DIN
10/100Base-TX Industrial Hardened
Ethernet Extender
10/100Base-TX Industrial Hardened
Ethernet Extender. 2-Pack
DIN Rail Mount Kit
APPLICATION
7
DATA CONNECT ENTERPRISE
PHONE: 301.924.7400 EXT 17
3405 OLANDWOOD CT
FAX: 301.924.7403
OLNEY, MD 20832
USA
www.data-connect.com
INDUSTRIAL
NETWORK
ANYWHERE
SOLUTIONS
- ETHERNET EXTENDERS
INDUSTRIAL
ETHERNETSOLUTIONS
EXTENDERS
NETWORK ANYWHERE
COPPER ETHERNET EXTENDERS MULTI-DROP
PRODUCT
ETHERNET
RESOURCES
EXTENDERS
8
DCE 2178MDEE
Regulatory Approvals
The Data Connect DCE/2178MDEE Industrial Grade Multi Drop Ethernet
Extender is an one 8-port 10/100Base-TX switch and two 2- wire Ethernet
ports used to extend Ethernet up to 300 meters (984 feet) at 50Mbps over
two existing voice grade copper wires. A simple single switch allows for a
choice between local or remote setting. Thus select local for side A of the
circuit and select remote for side B of the circuit. The DCE/2178MDEE is
fully managed via SNMP, Web Browser, Telnet or Console port and is designed to integrate 10/100 Mbps networks into VDSL backbone. The
DCE/2178MDEE supports advance features such as 802.1Q VLAN, MACbased Trunking, IPMulticast IGMP Snooping, Rapid Spanning Tree for Redundancy, QOS foe Priority Queuing, and Port Mirroring. The
DCE/2178MDEE functions at temperatures ranging from -40 Degrees Celsius to 75 Degrees Celsius (-40 Degrees Fahrenheit to 167 Degrees Fahrenheit) and tested for functional operation at -40 Degrees Celsius to 85 Degrees Celsius (-40 Degrees Fahrenheit to 185 Degrees Fahrenheit). The
DCE/2178MDEE complies with NEMA TS1 & TS2 that meets with Environmental requirements for Traffic Control equipment and complies with
IEC61000-6-2 EMC, a Generic Standard Immunity for the industrial environment.
ISO: Manufactured in an ISO9001 facility
EMI: FCC Part 15, Class A, EN61000-6-4, EN55022, EN61000-3-2,
EN61000-3-3
EMS: EN61000-6-2, EN61000-4-2 (ESD Standards), Contact: + / 6KV;
Criteria B, Air: + / - 8KV; Criteria B
EN61000-4-3 (Radiated RFI Standards), 10V/m, 80 to 1000MHz; 80%
AM Criteria A
EN61000-4-4 (Burst Standards), Signal Ports: + / - 4KV; Criteria B
D.C. Power Ports: + / - 4KV; Criteria B
EN61000-4-5 (Surge Standards), Signal Ports: + / - 1KV; Line-to- Line;
Criteria B, D.C. Power Ports: + / - 0.5KV; Line-to-earth; Criteria B
EN61000-4-6 (Induced RFI Standards) Signal Ports: 10Vrms @
0.15~80MHz; 80% AM Criteria A D.C. Power Ports: 10Vrms @
0.15~80MHz;30A/m @ 50, 60Hz; Criteria A
Environmental Test Compliance: IEC60068-2-6 FC (Vibration Resistance) 5g @ 10~150KHz, Amplitude 0.35mm
(Operation/Storage/Transport) IEC60068-2-27 Ea (Shock)
25g @ 11ms (Half-Sine Shock Pulse; Operation)
50g @ 11ms (Half-Sine Shock Pulse; Storage/Transport)
IEC60068-2-32 Ed (Free Fall), 1M (3.281ft)
FEATURES
Complies with NEMA TS1 & TS2 Environmental requirements
for Traffic Control equipment
Complies with IEC61000-6-2 EMC Generic Standard
Immunity for industrial environment
Ethernet Port: 10/100Mbps-Full/Half duplex, AutoNegotiation, Auto-MD/MDX
SPECIFICATIONS
Ethernet Extender (RJ11 and Terminal) Port: Symmetrical on
Technology Standards: IEEE802.3 10BASE-T, IEEE802.3u 100BASE-TX, Ethernet over
VDSL, IEEE802.3x, IEEE802.1p, IEEE802.1Q, IEEE802.1w, IEEE802.1x
Forward and Filtering Rate: 14,880pps for 10Mbp, 148,810pps for 100Mbps Packet
Buffer Memory: 2M bits
Processing Type: Store-and-Forward, Half-duplex back-pressure and IEEE802.3x fullduplex flow control
Address Table Size: 8192 MAC addresses
Power Input: Input Voltage: 12 to 48VDC (Terminal Block); 12VDC (DC Jack) Power
Consumption: 11W Max. 0.92A@12VDC, 0.46A@24VDC
Overload Current Protection: Present
Reverse Polarity Protection: Present
Mechanical Casing: Aluminum case, IP 30
Dimensions: 60mm (W) x 125mm (D) x 145mm (H), (2.36" (W) x 4.92" (D) x 5.7" (H))
Weight: 1.1Kg (2.42lbs.)
Installation: DIN-Rail
Interface Ethernet Port: 10/100BASE-TX: 8 ports
Ethernet Extender Ports: RJ-11 and Terminal Block port: 2 ports
Speed: 1/3/5/10/15/20/25/30/40/50 Mbps
Distance: 1900meters (6,232ft.)
Cable: Telephone line 24 AWG (0.5mm diameter, 1-pair wire) or larger
Console Port: Port: One DB9 RS-232 port
Per Unit: Power Status (Power 1, Power 2, Power 3)
Per Port: 10/100TX: Link/Activity, Speed Extender Port: Link :DIP switch: Two DIP
switches: Local (CO) or Remote (CPE)
Alarm Contact: One relay output with current 1A@24VDC
Environment Operating Temperature -40°C to 75°C (-40°F to 167°F)
Tested @ -40°C to 85°C (-40°F to 185°F)
Storage Temperature: -40°C to 85°C (-40°F to 185°F)
Ambient Relative Humidity: 5% to 95% (non-condensing)
ORDERING INFORMATION
DCE/2178MDEE
DCE/2178MDEE-DC12J
DCE/2178MDEE-DC12TB
DCE/2178MDEE-DC48TB
the VDSL, High speed, Full-duplex, 50Mbps
communications link over existing copper Telephone
Line
-40 Degrees Celsius to 75 Degrees Celsius (-40 Degrees
Fahrenheit to 167 Degrees Fahrenheit) operating
temperature range
1000Mbps-Full Duplex, 10/100Mbps-Full/Half duplex, AutoNegotiation, Auto-MD/MDX
RS232 console, Telnet, SSL/SSH, SNMP V1, V2C, & V3,
RMOM, Web Browser, and TFTP Management
Data Connect proprietary ‘a-ring’ support for Network
Redundancy; recovery time <15ms
IEEE802.1w RSTP, IEEE802.1S MSTP and IEEE802.1D STP
compatible
Supports port-based VLAN and IEEE802.1Q VLAN Tagging
and GVRP
IP Multicast Filtering through IGMP Snooping V1, V2, & V3
IEEE802.1P QOS with four priority queues
Mac-based trunking with automatic link fail-over
Supports Command Line Interface in RS232 Console
Supports IEEE802.1X Security
Bandwidth Rate Control
Per-port programmable MAC address locking
Up to 24 Static Secure MAC addresses per port
Port-Mirroring
Full wire-speed forwarding rate
Redundant Power Inputs with Terminal Block and DC Jack
Hardened aluminum
Supports NTP
APPLICATION
NEXT PAGE —————>
8
DATA CONNECT ENTERPRISE
PHONE: 301.924.7400 EXT 17
3405 OLANDWOOD CT
FAX: 301.924.7403
OLNEY, MD 20832
USA
www.data-connect.com
INDUSTRIAL
NETWORK
ANYWHERE
SOLUTIONS
- ETHERNET EXTENDERS
INDUSTRIAL
ETHERNETSOLUTIONS
EXTENDERS
NETWORK ANYWHERE
COPPER ETHERNET EXTENDERS
MULTI-DROP/PORT
PRODUCT
ETHERNET
RESOURCES
EXTENDERS
9
DCE 2178MDEE
MULTI-DROP ETHERNET EXTENDER
APPLICATION
DCE 2178MPEE
MULTI-PORT POINT-TO-POINT
APPLICATION
9
DATA CONNECT ENTERPRISE
PHONE: 301.924.7400 EXT 17
3405 OLANDWOOD CT
FAX: 301.924.7403
OLNEY, MD 20832
USA
www.data-connect.com
INDUSTRIAL
NETWORK
ANYWHERE
SOLUTIONS
- ETHERNET EXTENDERS
INDUSTRIAL
ETHERNETSOLUTIONS
EXTENDERS
NETWORK ANYWHERE
COPPER ETHERNET EXTENDERS
MULTI-PORT COPPER
PRODUCT
ETHERNET
RESOURCES
EXTENDERS
10
DCE 2178MPEE
Regulatory Approvals
The Data Connect DCE/2178MPEE Industrial Grade Multi Port Ethernet
Extender is an one 4-port 10/100Base-TX switch and one 2- wire Ethernet
port used to extend Ethernet up to 300 meters (984 feet) at 50Mbps over
two existing voice grade copper wires. A simple single switch allows for a
choice between local or remote setting. Thus select local for side A of the
circuit and select remote for side B of the circuit. The DCE/2178MPEE is
fully managed via SNMP, Web Browser, Telnet or Console port and is designed to integrate 10/100 Mbps networks into VDSL backbone. The
DCE/2178MPEE supports advance features such as 802.1Q VLAN, MACbased Trunking, IPMulticast IGMP Snooping, Rapid Spanning Tree for Redundancy, QOS foe Priority Queuing, and Port Mirroring. The
DCE/2178MPEE functions at temperatures ranging from -40 Degrees Celsius to 75 Degrees Celsius (-40 Degrees Fahrenheit to 167 Degrees Fahrenheit) and tested for functional operation at -40 Degrees Celsius to 85 Degrees Celsius (-40 Degrees Fahrenheit to 185 Degrees Fahrenheit). The
DCE/2178MPEE complies with NEMA TS1 & TS2 that meets with Environmental requirements for Traffic Control equipment and complies with
IEC61000-6-2 EMC, a Generic Standard Immunity for the industrial environment.
ISO: Manufactured in an ISO9001 facility
EMI: FCC Part 15, Class A, EN61000-6-4, EN55022, EN61000-3-2,
EN61000-3-3
EMS: EN61000-6-2, EN61000-4-2 (ESD Standards), Contact: + /
6KV; Criteria B, Air: + / - 8KV; Criteria B
EN61000-4-3 (Radiated RFI Standards), 10V/m, 80 to 1000MHz;
80% AM Criteria A
EN61000-4-4 (Burst Standards), Signal Ports: + / - 4KV; Criteria B
D.C. Power Ports: + / - 4KV; Criteria B
EN61000-4-5 (Surge Standards), Signal Ports: + / - 1KV; Line-toLine; Criteria B, D.C. Power Ports: + / - 0.5KV; Line-to-earth;
Criteria B EN61000-4-6 (Induced RFI Standards) Signal Ports:
10Vrms @ 0.15~80MHz; 80% AM Criteria A D.C. Power Ports:
10Vrms @ 0.15~80MHz;30A/m @ 50, 60Hz; Criteria A
Environmental Test Compliance: IEC60068-2-6 FC (Vibration
Resistance) 5g @ 10~150KHz, Amplitude 0.35mm
(Operation/Storage/Transport) IEC60068-2-27 Ea (Shock)
25g @ 11ms (Half-Sine Shock Pulse; Operation)
50g @ 11ms (Half-Sine Shock Pulse; Storage/Transport)
IEC60068-2-32 Ed (Free Fall), 1M (3.281ft)
FEATURES
Complies with NEMA TS1 & TS2 Environmental
Requirements for Traffic Control equipment
Complies with IEC61000-6-2 EMC Generic Standard
Immunity for industrial environment
Ethernet Port: 10/100Mbps-Full/Half duplex, Auto-
SPECIFICATIONS
Negotiation, Auto-MD/MDX
Technology Standards: IEEE802.3 10BASE-T, IEEE802.3u 100BASE-TX, Ethernet over
VDSL, IEEE802.3x, IEEE802.1p, IEEE802.1Q, IEEE802.1w, IEEE802.1x
Forward and Filtering Rate: 14,880pps for 10Mbp, 148,810pps for 100Mbps Packet
Buffer Memory: 2M bits
Processing Type: Store-and-Forward, Half-duplex back-pressure and IEEE802.3x fullduplex flow control
Address Table Size: 8192 MAC addresses
Power Input: Input Voltage: 12 to 48VDC (Terminal Block); 12VDC (DC Jack) Power
Consumption: 11W Max. 0.92A@12VDC, 0.46A@24VDC
Overload Current Protection: Present
Reverse Polarity Protection: Present
Mechanical Casing: Aluminum case, IP 30
Dimensions: 60mm (W) x 125mm (D) x 145mm (H), (2.36" (W) x 4.92" (D) x 5.7" (H))
Weight: 1.1Kg (2.42lbs.)
Installation: DIN-Rail
Interface Ethernet Port: 10/100BASE-TX: 4 ports
Ethernet Extender Ports: RJ-11 and Terminal Block port: 2 ports
Speed: 1/3/5/10/15/20/25/30/40/50 Mbps
Distance: 1900meters (6,232ft.)
Cable: Telephone line 24 AWG (0.5mm diameter, 1-pair wire) or larger
Console Port: Port: One DB9 RS-232 port
Per Unit: Power Status (Power 1, Power 2, Power 3)
Per Port: 10/100TX: Link/Activity, Speed Extender Port: Link :DIP switch: Two DIP
switches: Local (CO) or Remote (CPE)
Alarm Contact: One relay output with current 1A@24VDC
Environment Operating Temperature -40°C to 75°C (-40°F to 167°F)
Tested @ -40°C to 85°C (-40°F to 185°F)
Storage Temperature: -40°C to 85°C (-40°F to 185°F)
Ambient Relative Humidity: 5% to 95% (non-condensing)
ORDERING INFORMATION
DCE/2178MPEE
DCE/2178MPEE-DC12J
DCE/2178MPEE-DC12TB
DCE/2178MPEE-DC48TB
<—————— APPLICATION PREVIOUS PAGE
DATA CONNECT ENTERPRISE
PHONE: 301.924.7400 EXT 17
Ethernet Extender (RJ11 and Terminal) Port: Symmetrical
on the VDSL, High speed, Full-duplex, 50Mbps
communications link over existing copper
Telephone Line
-40 Degrees Celsius to 75 Degrees Celsius (-40 Degrees
Fahrenheit to 167 Degrees Fahrenheit) operating
temperature range
1000Mbps-Full Duplex, 10/100Mbps-Full/Half duplex, AutoNegotiation, Auto-MD/MDX
RS232 console, Telnet, SSL/SSH, SNMP V1, V2C, & V3,
RMOM, Web Browser, and TFTP Management
Data Connect proprietary ‘a-ring’ support for Network
Redundancy; recovery time <15ms
IEEE802.1w RSTP, IEEE802.1S MSTP and IEEE802.1D
STP compatible
Supports port-based VLAN and IEEE802.1Q VLAN
Tagging and GVRP
IP Multicast Filtering through IGMP Snooping V1, V2, & V3
IEEE802.1P QOS with four priority queues
Mac-based trunking with automatic link fail-over
Supports Command Line Interface in RS232 Console
Supports IEEE802.1X Security
Bandwidth Rate Control
Per-port programmable MAC address locking
Up to 24 Static Secure MAC addresses per port
Port Mirroring
Full wire-speed forwarding rate
Redundant Power Inputs with Terminal Block and DC Jack
Hardened aluminum
Supports NTP
10
3405 OLANDWOOD CT
FAX: 301.924.7403
OLNEY, MD 20832
USA
www.data-connect.com
NETWORK
INDUSTRIAL
ANYWHERE
SOLUTIONS
- ETHERNET EXTENDERS
NETWORK ANYWHERE
COPPER ETHERNET EXTENDERS
11
INDUSTRIAL
ETHERNET
SOLUTIONS
EXTENDERS
LONG REACH
PRODUCT
ETHERNET
RESOURCES
EXTENDERS
2178LRE2/4/8
The DCE 2178LRE is a Long Reach Ethernet Network Extender (LER)
designed to provide bonded, high-speed services over SHDSL on existing
copper infrastructure using
standards based on EFM (Ethernet in the First Mile) technology (2BaseTL). EFM, also known as IEEE 802.3ah, is a collection of protocols
specified in IEEE 802.3, defining
Ethernet in access networks, i.e. first or last mile. With Wide, Metro and
Local Area Networks already standardized, EFM allows a continuou s
Ethernet network across the globe,
eliminating non-native transports such as Ethernet over ATM from access
networks. EFM also addresses other issues, required for mass deployment of Ethernet
services, such as operations, administration & management (OAM) and spectral compatibility with existing technologies such as voice, ASDL, VDSL and SHDSL. The
DCE/2178LRE is a bridge mode modem that delivers Ethernet services with symmetrical
bandwidth at rates up to 22.8Mbps with four bonded copper pairs. This "Pure
Ethernet" solution provides a seamless integration into today and tomorrow's networks.
The modem operates in point-to-point connections between remote office and
enterprise headquarters, providing business-class Ethernet service at symmetrical highspeed connectivity that is ideal for small-to-medium enterprises.
DATA RATE


























2-PAIR
4-PAIR
[KM]
[MI]
[KM]
[MI]
[KM]
[MI]
192
8
4.9
8
4.9
8
4.9
512
6.4
3.9
6.7
4.1
6.7
4.1
1536
5.7
3.5
6
3.7
6.5
4
2048
5.1
3.1
5.7
3.5
6.4
3.9
4096
3.9
2.4
5.1
3.1
5.7
3.5
4608
3.5
2.1
5
3
5.5
3.4
5696
2.9
1.8
4.6
2.8
5.1
3.1
2.9
1.8
4.6
2.8
17088
3.5
2.1
22784
2.9
1.8
11392
SPECIFICATIONS
1-PAIR
[KBPS]
FEATURES
Connector : RJ45, 8 pins
SHDSL.bis: ITU-T G.991.2 (2004) Annex AF/BG
Encoding scheme: 16-TCPAM, 32-TCPAM• 2BASE-TL, 64/65-octet
encoding
EFM bonding (IEEE 802.3ah PAF)
Maximum date rate is 22.8Mbps for 8-wire mode (5.7Mbps/Port x
4Ports=22.8Mbps)
Impedance: 135 ohms
Four RJ45 Connectors• 4-ports switching hub• 10/100 Base-T autosensing and auto-negotiation
Auto-MDI/MDIX (Auto-Crossover)
802.1d Transparent Bridging
ingress Rate control
Egress Traffic shaping
Classification based on Port Base / VLAN Tag / DSCP• 4 Priority
Queues
WRR (Weighted round-robin) / BE (Best Effort) / SP (Strictly Priority)


Extends Ethernet services to sites with existing copper infrastructure




Flexible configuration as CPE or CO




QoS feature for guaranteed Ethernet service

Supports firmware upgrade via web
EFM Bonding (PAF, PME Aggregation Function) up to 22.8Mbps
(4 pairs)
Supports EFM OAM complying with IEEE 802.3ah
Low Delay, Jitter and Packet Loss for delay sensitive applications
Comprehensive and easy OAM&P functions for provisioning and
management
Web-based GUI for setup, configuration and management
Menu-driven interface for local control via console or telnet
Password protected management and access control list for
administration
802.1Q Tag-Based VLAN
ORDERING INFORMATION
Port-Based VLAN• Port-Based Q-in-Q
Priority Re-mapping• VLAN Trunk mode
DCE/2178LRE2-2PK
Easy to use web-based GUI for quick setup, configuration and management
Menu-driven interface/Command line interface (CLI ) for local console and telnet access
Password protected management and access control list for administration
SNMP v1/v2 (RFC1157/1901/1905) agent and MIB II (RFC1213/1493)•
EFM OAM (IEEE 802.3ah)
Software upgrade via web-browser/TFTPWAN Link/Activity, LAN
Link/Act/Speed System: Power, Alarm and Management2MB Flash
Memory , 4MB SDRAM
ITU-T G.991.2, IEEE802.3, 802.3u, 802.3ah, 802.3ad
DCE/2178LRE4-2PK
DCE/2178LRE8-2PK
4 port LAN extender, 2 wire, 5.7Mbps,
120VAC
4 port LAN extender, 4 wire, 11.4Mbps,
120VAC
4 port LAN extender, 8 wire, 22.8Mbps,
120VAC
APPLICATION
4-WIRE BANDWIDTH AGGREATION
DC 9V via AC power adapter 9W
168 x 195 x 48mm1.3Kg
0~50°C (Operating), 0~70°C (Storage), 10~90% non-condensing
CE, FCC, RoHS35,000 hours
11
DATA CONNECT ENTERPRISE
PHONE: 301.924.7400 EXT 17
3405 OLANDWOOD CT
FAX: 301.924.7403
OLNEY, MD 20832
USA
www.data-connect.com
INDUSTRIAL
NETWORK
ANYWHERE
SOLUTIONS
- ETHERNET EXTENDERS
INDUSTRIAL
ETHERNETSOLUTIONS
EXTENDERS
NETWORK ANYWHERE
COPPER ETHERNET EXTENDERS HIGH SPEED
PRODUCT
ETHERNET
RESOURCES
EXTENDERS
12
DCE 2178HSEE
SPECIFICATIONS
10/100Base-TX:
VDSL:
The Data Connect 2178HSEE is a high speed 100/100Mbps Downstream /
Upstream, over Ethernet extension. The DCE 2178HSEE is designed based
on two core networking technology, Ethernet and the latest Very-high-datarate Digital Subscriber Line. Our technology offers absolutely fastest data
transmission speed over existing copper telephone lines without the need
of rewiring. The DCE 2178HSEE supports ultra-high performance to the
pervasive telephone line network with up to 100/100Mbps symmetric data
rate within 300m and 50/2Mbps for 1.4km long range connections.
The Data Connect 2178HSEE functions over existing telephone copper
wires. In addition the DCE 2178HSEE is a Long Reach Ethernet (LRE) extender providing one RJ-45 Ethernet port and one RJ-11 phone jack for
VDSL2 connection. By using the additional Splitter from the DCE 2178HSEE2PK (two pack), the splitter can allow POTS and Ethernet to share the existing phone line; therefore, there is no need to replace existing copper wiring.
Just plug the DCE 2178HSEE with an additional splitter into the existing RJ11 telephone jack and a high-performance Ethernet extender network can be
connected. The DCE 2178HSEE is ideal to be used as an Ethernet extender
to an existing Ethernet network.
The Data Connect 2178HSEE can deliver High-Demand service connectivity for ISP Triple Play devices. The DCE2178HSEE provides excellent
bandwidth to satisfy the triple play devices for home entertainment and
communication. With the capability of 100/100Mbps symmetric data transmission, the DCE 2178HSEE enables many Multi-Media services to work on
local Internet services, such as VOD (Video on Demand), Voice over IP,
Video phone, IPTV, Internet caching server, distance education, and many
more.
The Data Connect 2178HSEE is a plug-and-play design and is fully compatible with all kinds of network protocols. Moreover, the operating status of
each individual port and the whole system can be easily viewed via the diagnostic LEDs on the front panel. The DCE 2178HSEE offers two modes, CPE
and CO, for application: CPE mode is used at client side and CO mode is at
central side. The CPE or CO mode can be selected by using a built-in DIP
switch. In a point-to-point configuration, there must be a CPE mode on one
side and a CO mode on the other side to perform a seamless Ethernet connection.
The Data Connect 2178HSEE features a symmetric Band-Plan for the
transmission of upstream and downstream signals. The band plan performs
higher transmission quality in short range for central side (CO) in symmetric
mode. When the DCE 2178HSEE is in profile 17a operation mode, it provides
long distance Ethernet transmission with ultra high performance to the pervasive telephone line network. When the DCE 2178HSEE is in 30a operation
mode, it provides short distance Ethernet transmission with higher speed
performance in upstream and downstream traffic.
• 17a Profile
DISTANCE
300m
400m
600m
800m
1000m
SPEED
86/65Mbps
86/52Mbps
81/36Mbps
72/19Mbps
60/9Mbps
1200m
PHONE:
Additional Splitter for POST connection
• 4 position DIP switch
• CO / CPE mode select
• Selectable fast and interleaved mode
• Selectable target 17a / 30a profiles
• Selectable target SNR mode
• VDSL-DMT
- ITU-T G.993.1 VDSL
- ITU-T G.997.1
- ITU-T G.993.2 VDSL2 (Profile 17a/30a Support)
• One Power
• 3 for RJ-11/VDSL2
• 2 for per RJ-45 10/100Base-TX port
• Ethernet
10Base-T: 2-pair UTP Cat.3,4,5 up to 100m (328ft)
100Base-TX: 2-pair UTP Cat.5, up to 100m (328ft)
• VDSL
Twisted-pair telephone wires (AWG24 or better) up to 1.4km
5V DC, 2A
6.6 Watts / 22 BTU
Dimensions: 3-13/16 x 2-3/4 x 1 (inches)
Weight: .44 Pound
Operating Temperature
Temperature: 0 ~ 50 Degree C
Relative Humidity: 10 ~ 90% (non-condensing)
Storage Temperature
Temperature: -10 ~ 70 Degree C
Relative Humidity: 10 ~ 90% (non-condensing)
Switch Processing Scheme: Store-and-Forward
Address Table: 1K entries
Flow Control: Back pressure for half duplex, IEEE 802.3x Pause
Frame for full duplex
Switch Fabric: 0.2Gbps
Throughput (Packet per second): 0.14Mpps
10/100Base-TX:
2-Pair UTP Cat. 3,4, 5 (100meters, max.)
EIA / TIA-568 100-ohm STP (100meters, max.)
Regulation Compliance: FCC Part 15 Class A, CE
IEEE Standards: IEEE 802.10Base-T, IEEE 802.3u 100Base-TX
ITU-T Standards: G.993.1 (VDSL), G.997.1, G993.2 VDSL2 (Profile
17A/30A)
59/6Mbps
1400m
1 RJ-45, Auto-Negotiation and Auto-MDI/MDI-X
1 RJ-11, female Phone Jack
50/2Mbps
• 30a profile
DISTANCE
300m
400m
600m
800m
SPEED
100/100Mbps
90/90Mbps
61/40Mbps
54/8Mbps
12
DATA CONNECT ENTERPRISE
PHONE: 301.924.7400 EXT 17
ORDERING INFORMATION
DCE/2178HSEE-2PK
DCE/2178HSEE
High Speed Ethernet Extender 2-Pack
High Speed Ethernet Extender
APPLICATIONS NEXT PAGE ————————>
3405 OLANDWOOD CT
FAX: 301.924.7403
OLNEY, MD 20832
USA
www.data-connect.com
INDUSTRIAL
NETWORK
ANYWHERE
SOLUTIONS
- ETHERNET EXTENDERS
INDUSTRIAL
ETHERNETSOLUTIONS
EXTENDERS
NETWORK ANYWHERE
COPPER ETHERNET EXTENDERS HIGH SPEED
PRODUCT
ETHERNET
RESOURCES
EXTENDERS
13
Point-to-Point Ethernet Extender
Two DCE 2178HSEE acting as a standalone pair is good for Ethernet distance extension over existing telephone wires. With just one pair of
AWG-24 copper wire, you can easily connect two Ethernet networks together with the data rate of maximum 100/100Mbps. With the additional
splitter, the telephone service can still be used while the DCE2178HSEE is in operation. The two solutions listed below are typical applications
for the Ethernet over VDSL2 Converter.
Multi-Dwelling Units / Multi-Tenant Units / Hospitality Solution
The DCE 2178HSEE is a perfect solution to quickly provide cost-effective yet high speed network services to multi-unit buildings such as residential buildings (multi-dwelling units), commercial (multi-tenant units) buildings, hotels or hospitals. By utilizing the existing telephony infrastructure, network installation is straightforward and requires no new wiring. With up to 100/100Mbps transmission, Video on Demand, IP telephony and various broadband services can be easily provided.
APPLICATIONS
CONTINUED
NEXT PAGE ——->
13
DATA CONNECT ENTERPRISE
PHONE: 301.924.7400 EXT 17
3405 OLANDWOOD CT
FAX: 301.924.7403
OLNEY, MD 20832
USA
www.data-connect.com
INDUSTRIAL
NETWORK
ANYWHERE
SOLUTIONS
- ETHERNET EXTENDERS
INDUSTRIAL
ETHERNETSOLUTIONS
EXTENDERS
NETWORK ANYWHERE
COPPER ETHERNET EXTENDERS
HIGH SPEED & COAX
PRODUCT
ETHERNET
RESOURCES
EXTENDERS
14
2178HSEE APPLICATION
Last Mile of FTTx Deployment The DCE2178HSEE is an ideal solution for FTTx (Fiber to the Building, Fiber to the Campus or Fiber to the Node)
applications. It supports high bandwidth over existing telephone wires in the “last mile” from the ISP / Telecom / Service provider’s fiber node to
the buildings and customers' houses. The 10/100Mbps port of DCE 2178HSEE can be directly connected to a PC or to Ethernet devices such as
Ethernet Switches or Broadband Routers. It is excellent for phone line network built under Internet because every room or house could use the
existing phone line to transmit data through the Internet and the whole building can share Internet to the wide area network with minimum cost.
• Cost-effective VDSL2 Master / Slave Ethernet extension
• Selectable BNC and RJ-11 mode for the data transmission • -40
to 75 Degree C operating temperature • Redundant Power Design: 12~48V DC redundant power with polarity reverse protect
function • IP-30 metal case protection • One box design, Master /
Slave selectable via DIP Switch • Defines Asymmetric (Band
Plan 998) and Symmetric band plans for transmission of Upstream and Downstream signals • Complies with IEEE 802.3,
IEEE 802.3u and IEEE 802.3x standards • DMT (Discrete MultiTone) line coding • Half Duplex Back Pressure and IEEE 802.3x
Full Duplex Pause Frame Flow Control • Supports up to 1536
bytes packet size, 802.1Q VLAN tag transparent • Integrated
address look-up engine, supports 2K absolute MAC addresses •
VDSL2 Standalone transceiver for simple bridge modem application • Selectable Target Band Plan and Target SNR Margin • Supports extensive LED indicators for network diagnostics • DIN
Rail and Wall Mount Design
DCE 2178CEE PERFORMANCE CHART & APPLICATION
METERS
200
400
600
800
1000
1200
1400
PHONE LINE
ASYMMETRICAL
99/63 Mbps
91/48 Mbps
71/32
Mbps
53/18 Mbps
38/8 Mbps
33/5 Mbps
28/2 Mbps
1600
1800
2000
2200
2400
PHONE LINE
SYMMETRICAL
91/99 Mbps
74/79 Mbps
54/51
Mbps
38/34 Mbps
27/21 Mbps
24/15 Mbps
21/10 Mbps
BNC ASYMMETRICAL
100/65 Mbps
99/64 Mbps
97/59
Mbps
94/51 Mbps
84/45 Mbps
73/37 Mbps
61/28 Mbps
54/20 Mbps
48/13 Mbps
38/9 Mbps
35/6 Mbps
31/4 Mbps
BNC SYMMETRICAL
95/99 Mbps
92/97 Mbps
81/82
Mbps
71/70 Mbps
60/57 Mbps
50/44 Mbps
42/33 Mbps
37/27 Mbps
29/22 Mbps
23/21 Mbps
19/17 Mbps
19/13 Mbps
14
DATA CONNECT ENTERPRISE
PHONE: 301.924.7400 EXT 17
3405 OLANDWOOD CT
FAX: 301.924.7403
OLNEY, MD 20832
USA
www.data-connect.com
INDUSTRIAL
NETWORK
ANYWHERE
SOLUTIONS
- ETHERNET EXTENDERS
NETWORK ANYWHERE
COPPER ETHERNET EXTENDERS
15
INDUSTRIAL
ETHERNETSOLUTIONS
EXTENDERS
COAX
PRODUCT
ETHERNET
RESOURCES
EXTENDERS
DCE 2178CEE
The Data Connect 2178 Coax Ethernet
Extender is designed for an Industrial Coax Ethernet Extender application. The
DCE 2178CEE has a switching architecture with 4 RJ-45 10/100Mbps Ethernet
ports and one asymmetric or symmetric High Speed Ethernet port that can be
RJ-11 or BNC Connector. Installation can use either BNC or RJ-11 for network
deployment and achieve the absolutely fastest data transmission speed possible over existing coaxial cable and telephone wire without the need of rewiring.
The Data Connect 2178 Coax Ethernet Extender provides a high level of
immunity to electromagnetic interference and heavy electrical surges typical
of environments like plant floors or in curb side traffic control cabinets. The
DCE 2178CEE can operate in a wide temperature range of -40 to 75 Degree
Celsius, so it can be placed in almost any location. The DCE 2178CEE is packaged in a compact, IP-30 metal case that allows either DIN or panel mounting
for efficient use of cabinet space. The DCE 2178CEE has an integrated power
supply with a wide range of voltages (12 ~ 48VDC) that allows for worldwide
operability or for dual-redundancy with reversible polarity and an additional
switching high voltage option of 100-240VAC and 85-400VDC.
The Data Connect 2178 Coax Ethernet Extender incorporates Ethernet over
VDSL2 to transmit the Ethernet formatted data by using VDSL signaling over
the existing coaxial cable or telephone wire. Therefore, the DCE 2178CEE is
very good for deploying in networks that can use existing coaxial cable and
telephone wire to transmit data to the Internet with minimum cost. The DCE
2178CEE can adjust to Master or Slave mode via a DIP switch. When the DCE
2178CEE master is connected via telephone cable with the other DCE 2178CEE
slave device, the performance will be up to 99/63Mbps for asymmetric data
rate within 200m and up to 28/2Mbps for asymmetric data rate at 1.4km. When
the DCE 2178CEE master is connected via coax to DCE 2178CEE slave devices, the performance is up to 99/65Mbps for asymmetric data rate within
200m and up to 31/4Mbps for asymmetric data rate at 2.4km. This capability is
ideal for use as an Ethernet extender for your existing Ethernet network.
FEATURES















SPECIFICATIONS
10/100 Base-TX: 4 RJ-45, Auto-Negotiation & Auto-MDI / MDI-X
Coaxial: 1 BNC, Female Connector
Phone-Line: 1 rj-11, Female Connector
4 Position DIP Switch
Master / Slave Mode Select
Selectable BNC & RJ-11 Mode
Selectable Target Band Plan
Selectable Target SNR Mode
DMT (Discrete Multi-Tone) Line Coding
ITU-T G.997.1
ITU-T G.993.1
ITU-T G.993.2 (Profile 17a Support
LED INDICATORS
System: P1 (Green), P2 (Green), Fault (Green)
VDSL2: Master (Green), Slave (Green), ACT (Green), Sync. (Green)
10/100Mbps Port: LINK/ACT (Green)
Cost-effective VDSL2 Master / Slave Ethernet extension
Selectable BNC and RJ-11 mode for the data transmission •
40 to 75 Degree C operating temperature
Redundant Power Design: 12~48V DC redundant power with
polarity reverse protect function
IP-30 metal case protection
-
One box design, Master / Slave selectable via DIP Switch
Defines Asymmetric (Band Plan 998) and Symmetric band plans
for transmission of Upstream and Downstream signals
Complies with IEEE 802.3, IEEE 802.3u and IEEE 802.3x Standards
DMT (Discrete Multi-Tone) line coding
Ethernet: 10Base-T - 2-Pair, UTP Cat.3, 4, & 5 up to 100m (328ft)
Ethernet: 100Base-T - 2-Pair, UTP Cat.5, 5e, & 6 up to 100m (328ft)
Coaxial Cable: 50ohm, RG58A/U, RG58C/U, RG58/U, or Equivalent;
75ohm, RG-6 (Distance Up to 2.4Km
Twisted-Pair Telephone Wires (AWG24 or Greater) Distance Up to
1.4Km
DIMENSION (H x W x D): 5-5/16 x 3-15/16 x 1-5/16
WEIGHT: 1.1 pounds
12-48VDC, 100-240VAC, 85-400VDC
Half Duplex Back Pressure and IEEE 802.3x Full Duplex Pause
Frame Flow Control
Supports up to 1536 bytes packet size, 802.1Q VLAN tag transparent
Integrated address look-up engine, supports 2K absolute MAC
addresses
VDSL2 Standalone transceiver for simple bridge modem application
Selectable Target Band Plan and Target SNR Margin
5.64Watts / 19BTU
Supports extensive LED indicators for network diagnostics
REGULATION COMPLIANCE: FCC Part 15 Class A, CE
DIN Rail and Wall Mount Design
ORDERING INFORMATION
DCE/2178CEE Data Connect 2178 Coax Ethernet Extender
DCE/2178CEE-2PK Data Connect 2178 Coax Ethernet Extender 2-Pack
OPERATING TEMPERATURE: -40 TO 75 Degrees Celsius
OPERATING HUMIDITY: 5 to 90%, Relative Humidity, Noncondensing
STORAGE TEMPERATURE: -40 to 85 Degrees Celsius
STORAGE HUMIDITY: 5 TO 90%, Relative Humidity, Noncondensing
STABILITY TESTING: IEC6008-2-32 (Free Fall), IEC60068-2-27
(Shock), IEC60068-2-6 (Vibration)
IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3x Full
Duplex Frame Flow-Control
ITU-T: G.993.1, G.997.1, G993.2 (Profile 17a Support)
<——————————PREVIOUS PAGE APPLICATION & PERFORMANCE CHART
DATA CONNECT ENTERPRISE
PHONE: 301.924.7400 EXT 17
3405 OLANDWOOD CT
FAX: 301.924.7403
15
OLNEY, MD 20832
USA
www.data-connect.com
INDUSTRIAL
NETWORK
ANYWHERE
SOLUTIONS
- ETHERNET EXTENDERS
NETWORK ANYWHERE
COPPER ETHERNET EXTENDERS
INDUSTRIAL
ETHERNETSOLUTIONS
EXTENDERS
FIBER
PRODUCT
ETHERNET
RESOURCES
EXTENDERS
16
DCE 2178FEE
The DCE 2178FEE is a 10/100Base Ethernet to
100Base-FX fiber Ethernet extender designed for extending 10/100 Base T Ethernet over fiber. The DCE
2178 Fiber Ethernet Extender supports autonegotiation and manual mode on the twisted pair (TP)
copper Ethernet side. With advanced features like LLP
(Link Loss Pass-thru), FEF (Far-End Fault), Switch
mode (store & forward, 1600 Bytes maximum frame
size) or Ethernet extender mode (100/Full to 100/Full,
low latency, 9K Bytes packet support); the DCE
2178FEE is designed for customer premises equipment
in metro LAN, campus, enterprise, and fiber to the
building, curb, cabinet, house, neighborhood, and
premise applications. By offering simple DIP switch
settings, this Ethernet Extender can provide complete
control over all Ethernet Extender settings including
duplex and speed configuration. The DCE 2178FEE is
completely transparent to Layer 2 and Layer 3 protocols including IEEE 802.1q, VLAN tag, Q in Q, STP, IPX,
IP, etc.
FEATURES








Ethernet Extender with auto-change-forward
(Switch) function
Auto-Cross over MDI/MDX in TP port
Supports far end fault (FEF) function.
Auto-Negotiation or Manual mode in TP port
Supports link fault pass through (LFP) function.
Supports LED indicators.
Packet lengths up to 1600 bytes in Switch mode
Packet length is not limited in Ethernet Extender
mode.
SPECIFICATIONS
LAN INTERFACE SPECIFICATIONS
One RJ-45 female connector for straight or cross-over connection
Supports 10/100Base-T/TX, Full, Half duplex n-way (Auto-Negotiation)
Supports Full, Half duplex, 10/100 speed manual selections.
Transmission Packet Rate for 10/100Base-T/TX: 14880 per second /148800
per second.
Copper TP cable 4 pair Cat. 3 or 5 UTP
OPTICAL INTERFACE SPECIFICATIONS
Transceiver Connector type: ST, SC, WDM
Wavelength (typical): Multi-mode 850nm
Single-mode: (<50 Km): 1310nm/1550nm up to 120Km
WDM: 1310/1550nm or 1550/1310nm (A/B type) up to 60Km
ORDERING INFORMATION
DCE/2178FEE-2PK
DCE/2178FEE
DCE/2178FEE-RM
FIBER ETHERNET EXTENDER 2-PACK
FIBER ETHERNET EXTENDER SINGLE
FIBER ETHERNET EXTENDER RACK
MOUNT
APPLICATION
GENERAL SPECIFICATIONS
Complies with: IEEE 802.3 10Base-T, 802.3u 100Base-TX and 100Base-FX
standards
Temperature: 0 - 50o C (Operating); 0 - 70 o C (Storage).
Humidity: 20-80% non-condensing (Operating); 10-90% (Storage).
Power: Input: (AC adaptor) 90-250VAC, 24VDC Input, 18-36VDC, 48VDC
Input, 36-72VDC
Dimensions: 178.7mm x 251.6mm x 88mm (L x W x H)
Power Consumption: < 40W (8-slot full load)
Compliance: FCC part 15, Subpart B, Class A, ANSI C63.4:2003, CE
EN55022:2006, Class A, EN55024:1998+A1:2001+A2:2003,
LVD: EN 60 950-1:2001, & MTBF: 65,000 h (25oC)
Multi-mode: 850nm 2Km
Single-mode: 1310/1550nm to 120Km
WDM: 1310/1550nm or 1550/1310nm (A/B
type) to 60Km
Fiber——
16
DATA CONNECT ENTERPRISE
PHONE: 301.924.7400 EXT 17
3405 OLANDWOOD CT
FAX: 301.924.7403
OLNEY, MD 20832
USA
www.data-connect.com
INDUSTRIAL
NETWORK
ANYWHERE
SOLUTIONS
- ETHERNET EXTENDERS
NETWORK ANYWHERE
COPPER ETHERNET EXTENDERS
17
INDUSTRIAL
ETHERNETSOLUTIONS
EXTENDERS
WIRELESS
PRODUCT
ETHERNET
RESOURCES
EXTENDERS
DCE 2178WEE
SPECIFICATIONS
STANDARDS
Compliant with ADSL Standard:
Full-rate ANSI T1.413 Issue 2
G.dmt (ITU G.992.1) / G.lite (ITU G.992.2) / G.hs, Multimode (ITU G.994.1)
Capable of ADSL2 Standard: G.dmt.bis (ITU G.992.3)
Capable of ADSL2+ Standard: G.dmt.bis plus (ITU G.992.5)
Reach Extended ADSL (RE ADSL)
Supports Annex A, B, M, L
PROTOCLS: RFC 2364 - PPP over ATM (LLC/VCMUX)
RFC 2516 - PPP over Ethernet (LLC/VCMUX)
RFC 1483 - Classic IP over ATM (LLC/VCMUX)
RFC 2684 - Bridged IP over ATM (LLC/VCMUX)
RFC 2684 - Routed IP over ATM (LLC/VCMUX)
AAL & ATM SUPPORT: Supports up to 8 PVC
ATM Forum UNI 3.1/4.0 PVC
VC and LLC Multiplexing
Integrated ATM AAL5 support (UBR,CBR,VBR-rt, and VBR-nrt)
0~255 VPI plus 1~65535 VCI address range, OAM F4 & F5 Segment endto-end loop-back, AIS, and RDI OAM cells
PORTS LAN - 4 x Ethernet (10/100Mbps, Auto-Negotiation, Auto MDI/
MDI-X
WLAN - 1 x 802.11b/g/n Access Point with one 2dBi dipole antennas,
WAN - 1 x RJ-11
LED INDICATORS - PWR, Link, Data, LAN 1~4, WLAN, WPS
BUTTON - WLAN, Reset, WPS, Power
MAX. CONCURRENT SESSIONS – 2048
WIRELESS STANDARD - IEEE 802.11b, g and 802.11n
WIRELESS FREQUENCY - 2.4 to 2.4835GHz (Industrial Scientific Medical Band)
WIRELESS CHANNELS - Maximum 14 Channels, depending on regulatory authorities
WIRELESS DATA ENCRYPTION - 64 bit / 128 bit WEP, WPA-PSK /
WPA2-PSK, and WPS PBC
WIRELESS DATA RATE – Maximum up to 150Mbps
IEEE 802.11b - 1 / 2 / 5.5 / 11Mbps
IEEE 802.11g - 6 / 9 / 12 / 18 / 24 / 36 / 48 / 54Mbps
IEEE 802.11n 20MHz - 14 / 29 / 43 / 58 / 87 / 116 / 130 / 144Mbps
IEEE 802.11n 40MHz - 30 / 60 / 90 / 120 / 150Mbps
PROTOCOLS / FEATURES
NAT supports PAT and multimedia applications
NAT, Static Routing, and RIPv1/2
Transparent Bridging
Dynamic Domain Name System (DDNS), SNTP
DNS relay and IGMP proxy
DMZ and Virtual Server
Quality of Service (QoS) for Traffic Prioritization
TR-069 Ready, UPnP
SECURITY: PPP over PAP (Password Authentication Protocol,
RFC1334), PPP over CHAP (Challenge Authentication Protocol,
RFC1994), DoS Protection, Access Control ACL (Access Control), IP/
MAC /Application/URL Filter, Stateful Packet Inspection (SPI) Firewall,
Password protection for system management, VPN, VPN pass through,
PPTP VPN, IPSec VPN
MANAGEMNET
Web-Based configuration
Embedded Telnet server for remote and local management
Firmware upgraded and configuration data upload/download via WEB
SNMP v1/v2 MIB supported Support DHCP Server/Client/Relay
Built-in Diagnostic tool and IP Ping
DIMENSION (W X D X H) - 6-15/16 x 4-7/8 x 1-3/8 (inches)
POWER - 12V DC, 0.8A
OPERATING ENVIRONMENT Operating temperature: 0 ~ 50 Degree C
Storage temperature: -10 ~ 70 Degree C Humidity: 10 ~ 95% noncondensing EMISSION - FCC, CE
The Data Connect 2178WEE Wireless Ethernet Extender is an ideal and
inexpensive way to extend Ethernet when no fiber or copper wiring is
available. This means any computer or wireless–enabled network device
such as camera, security, and phone can connect to LAN without an additional cable via the DCE 2178WEE Wireless Ethernet Extender. In addition
the DCE 2178WEE offers a four port switch with physical LAN ports for
any server, switches or network device.
The DCE 2178WEE Wireless Ethernet Extender allows speed at up to 150
mbps by utilizing the new 802.11n wireless network capability. The radio
coverage is doubled from the standard and high speed wireless connections twice as far as non-Ethernet Extender Wireless networks. The DCE
2178WEE can also communicate with the 802.11n, 802.11g and 802.11b
standards.
In addition, for maximum network security, the DCE 2178WEE Wireless
Ethernet Extender supports the most up to date encryption including
WEP, WPA-PSK AND WPA2-PSK. In order to simplify the security settings, the DCE 2178WEE also supports WPS configuration with PBC/PIN
type for users to connect to a secured wireless network easily.
The Data Connect 2178WEE Wireless Ethernet Extender has user-friendly
management interfaces so that it can be managed by workstations running standard web browsers. The DCE 2178WEE provides DHCP server,
NAT, Virtual Server, DMZ, Access Control, IP Filter, PPTP/IPSec passthrough, DDNS, and UPnP capability. Furthermore for VPN tunnel, the
DCE 2178WEE supports PPTP/IPSec tunneling.
The Data Connect 2178WEE Wireless Ethernet Extender can also be configured to function as a Wireless ADSL2/2+ Router compliant with 802.11n
and features 1T1R MIMO antenna technology. This allows your office to
have both wireless Ethernet extension and a high speed ADSL2/2+ broadband internet connection. The DCE 2178WEE supports PPPoA (RFC 2364
– PPP over ATM adaption layer 5), RFC2684 encapsulation over ATM
(bridged or routed), PPP over Ethernet (RFC 2156) and IPoA (FRC1483) to
establish a connection with an ISP.
The Data Connect 2178WEE Wireless Ethernet Extender provides the
security of an internet firewall to protect the network from being accessed
by unauthorized users. The DCE 2178WEE offers Network Address Translation (NAT). All the incoming and outgoing IPs can be monitored and
filtered and it can block internal users from accessing the internet, identified websites and content. This is wireless Ethernet extension – the way it
is meant to be, fast, easy, flexible and secure.
ORDERING INFORMATION
DCE/2178WEE
WIRELESS N ETHERNET EXTENDER
FEATURES
• 4-Port Switch
• DHCP Server Support
• Supports IEEE 802.11b, g and 802.11n Wireless
Standard
• 802.11n Technology
• WEP Support
• WPS Push Button Control
• WPA-PSK Support
• Wireless MAC Access Control
17
DATA CONNECT ENTERPRISE
PHONE: 301.924.7400 EXT 17
APPLICATION NEXT PAGE——————->
3405 OLANDWOOD CT
FAX: 301.924.7403
OLNEY, MD 20832
USA
www.data-connect.com
INDUSTRIAL
NETWORK
ANYWHERE
SOLUTIONS
- ETHERNET EXTENDERS
INDUSTRIAL
ETHERNETSOLUTIONS
EXTENDERS
The DCE 2178FEE is a 10/100Base Ethernet to 100Base-FX fiber Ethernet extender designed for extending 10/100
Base T Ethernet
over
fiber. TheWIRELESS
DCE 2178 Fiber
Ethernet
auto-negotiation
and
manual
mode on
NETWORK
ANYWHERE
COPPER
ETHERNET
&
EXTENDERS
HIGH Extender
POWERsupports
WIRELESS
PRODUCT
EHTERNET
RESOURCES
EXTENDERS
the twisted pair (TP) copper Ethernet side. With advanced features like LLP (Link Loss Pass-thru), FEF (Far-End
18
DCE 2178WEE APLICATION
DCE 2178HPWEEHigher coverage & long distance between LAN connections
The DCE 2178HPWEE is a cost-effective outdoor wireless Ethernet extension solution for open space applications. It is best applied in outdoor
wireless Ethernet extension connections between buildings.
With multiple antenna choices and adjustable output power controller, the DCE 2178HPWEE provides higher coverage and long distance wireless
Ethernet extension also allows CPE users to easily install and adjust the suitable value in appropriate locations. The WISP mode supported also enables CPE users to connect to internet via local WISP provider.
***We suggest matching the same model in outdoor wireless Ethernet extension application for getting best performance
18
DATA CONNECT ENTERPRISE
3405 OLANDWOOD CT
OLNEY, MD 20832
USA
INDUSTRIAL
NETWORK
ANYWHERE
SOLUTIONS
- ETHERNET EXTENDERS
INDUSTRIAL
ETHERNETSOLUTIONS
EXTENDERS
NETWORK ANYWHERE
COPPER ETHERNET EXTENDERS
HIGH POWER WIRELESS
PRODUCT
ETHERNET
RESOURCES
EXTENDERS
19
DCE 2178HPWEE
The Data Connect 2178 High Power Wireless Ethernet Extender provides higher
transmitting power that translates to better performance and less interference
with your wireless network when setting up wireless Ethernet extension. The
DCE HPWEE is compatible with IEEE 802.11a/n, and the data rate is up to
300Mbps with the 802.11n mode. The DCE HPWEE not only has built-in 16dBi
dual-polarity Antenna plus two External Antenna Connectors to allow stronger
antenna upgrades. Therefore, the DCE HPWEE is quite suitable for widely open
space wireless applications.
The DCE 2178HPWEE supports multiple operation modes: AP, AP Client, and
WDS to conveniently configure versatile solutions in a wide range of wireless
scenarios. It also supports WISP mode so that CPE users could easily connect
to internet via a WISP provider or connect to a wired network.
In aspect of security, besides 64/128/152 bits WEP encryption, the DCE
2178HPWEE integrates WPA / WPA2, WPA-PSK / WPA2-PSK and 802.1x authority, to secure and protect your wireless Ethernet extender. Furthermore, with
user-friendly Web and SNMP based management interface, the DCE
2178HPWEE is easily managed and can be configured remotely.
The DCE 2178HPWEE is perfectly suitable to be installed in outdoor environments and exposed locations. With its IP-55 casing protection, the DCE
2178HPWEE can perform normally under rigorous weather conditions including
heavy rain and wind. With our unique Power over Ethernet (PoE) design, the
DCE 2178HPWEE can be easily installed in the areas where power outlets are
not available. The best way of using the DCE 22178HPWEE, is to build outdoor
wireless Ethernet extension between buildings on campuses, business parks,
rural areas and across highways for example.
DCE 2178HPWEE
DCE 2178HPWFA
DCE 2178HPWOA
DCE 2178HPWSA
Data Connect 2178 High Power Wireless Ethernet Extender 2-Pack
Data Connect 2178 High Power Wireless Ethernet Extender
Data Connect 2178 High Power Wireless Flat Antenna
Data Connect 2178 High Power Wireless Omni-Directional Antenna
Data Connect 2178 High Power Wireless Sector Antenna
FEATURES
WIRELESS ETHERNET EXTENSION EXTENDS YOUR ETHERNET TO
OTHER LOCATIONS NEARBY!!!










IEEE 802.11 a/n standards compliant
5GHz wireless networks deliver widely and connections with less interference
Multiple Antenna choices: Built-in 16dBi dual-polarity Antenna, and two
External Connectors (Reverse SMA connector)
Adopts 2T2R MIMO Technology for higher performance up to 300Mbps
with 802.11 n mode
IP-55 case protection against rigorous weather conditions
Wide range of temperature tolerance for low or high temperature environment
High Transmit Output Power up to 400mW with multiple adjustable transmit power control
Power over Ethernet design (with proprietary injector)
Multiple Wireless Access Modes: AP, Client, Client CPE (WISP), WDS,
AP&WDS
Supports 64/128/152-bit W#EP and 802.1X, WPA, WPA2, WPA&WPA2, WPA
-PSK, WPA2-PSK, and WPA-PSK&WPA2-PSK
IEEE 802.11n:
HT20 MCS0-MCS7<= -89dBm
HT40 MCS0-MCS7<= -85dBm
HT20 MCS8-MCS15<= -83dBm
HT40 MCS8-MCS15<= -80dBm
Data Rate
IEEE 802.11a:
54/48/36/24/18/1/29/6 Mbps
SPECIFICATIONS
Standard Support
IEEE 802.11a/n
IEEE 802.3u
Interface
Wireless: IEEE802.11a/n
LAN: 2 x 10/100Base-tx, Auto-MDI/MDIX
Antenna
Internal (default) - 16dBi dual-polarity Antenna
*Vertical Port HPBW
(YZ Plane / H-Plane): 36 Degree
(XZ Plane / E-Plane): 15 Degree
*Horizontal Port HPBW
(YZ Plane / E-Plane): 38 Degree
(XZ Plane / H-Plane): 17 Degree
External: RP-SMA Connector x 2
*Internal & external Antenna switchable by software
Max. Output Power
802.11a: 24 +/- 2dBm
802.11n: 23 +/- 2dBm (HT20/40)
5 levels adjustable (Full, 50%, 25%, 12.5%, Min.)
Frequency Range
FCC 5725 to 5850 MHz
CE: 5470 to 5725 MHz (DFS band)
Wireless Security
64/128/152-bits WEP, WPA, WPA-PSK, WPA2, WPA2-PSK, 802.1X
Wireless Access Mode
AP, Client, Client CPE (WISP), WDS, AP+WDS
Environmental Protection Rating: IP-55
Dimension: 110.98 x 255.6 x 47.65 mm
Power Adapter
15V DC, 0.8A (passive PoE)
Operating Environment
Temperature: –20 to 70 Degree Celsius
Humidity: 10 to 95% non-condensing
<—————PREVIOUS PAGE APPLICATION
DATA CONNECT ENTERPRISE
PHONE: 301.924.7400 EXT 17
-89 dBm @ 6 Mbps
-88 dBm @ 9 Mbps
-87dBm @ 12 Mbps
-86 dBm @ 18 Mbps
-83 dBm @ 24 Mbps
-79 dBm @ 36 Mbps
-75 dBm @ 48 Mbps
-73 dBm @ 54 Mbps
Modulation
OFDM with BPSK, QPSK, 16-QAM, 64-QAM
ORDERING INFORMATION
DCE 2178HPWEE-2PK
Receiver Sensitivity
IEEE 802.11a:
3405 OLANDWOOD CT
FAX: 301.924.7403
19
OLNEY, MD 20832
USA
www.data-connect.com
INDUSTRIAL
NETWORK
ANYWHERE
SOLUTIONS
- ETHERNET EXTENDERS
INDUSTRIAL
ETHERNETSOLUTIONS
EXTENDERS
The DCE 2178FEE is a 10/100Base Ethernet to 100Base-FX fiber Ethernet extender designed for extending 10/100
Base T Ethernet
over
fiber. TheETHERNET
DCE 2178 FiberEXTENDERS
Ethernet Extender supports
auto-negotiation
and
manual
mode on
NETWORK
ANYWHERE
COPPER
HIGH POWER
PRODUCT
WIRELESS
RESOURCES
ANTENNAS
the twisted pair (TP) copper Ethernet side. With advanced features like LLP (Link Loss Pass-thru), FEF (Far-End
20
DCE 2178HPWFA / DCE 2178HPWOA / DCE 2178HPWSA
The Data Connect High Power Wireless 5GHz 18dBi Flat Antenna operates
unidirectional outdoor at 5100-5900MHz with Beam-width Degree of 10 degrees horizontal and 10 degrees vertical.
The Data Connect 2178 High Power Wireless 5GHz 10dBi Omni-directional
Antenna for use outdoor with a 360 degree Horizontal Spread & a 6 degree
Vertical Spread.
The Data Connect 2178 High Power Wireless 5GHz 16.5dBi Sector Antenna
for use outdoor with a 120 degree Horizontal Spread & a 10 degree Vertical
Spread.
ORDERING INFORMATION
DCE 2178HPWFA DATA CONNET 2178 HIGH POWER WIRELESS
FLAT ANTENNA
DCE 2178HPWOA DATA CONNET 2178 HIGH POWER WIRELESS
OMNI-DIRECTIONAL ANTENNA
DCE 2178HPWSA DATA CONNET 2178 HIGH POWER WIRELESS
SECTOR ANTENNA
FEATURES
DCE 2178HPWFA (FLAT)
 10 degree Horizontal Spread & 10 degree Vertical Spread


Connector: N-female
Operating Environment: Outdoor
DCE 2178HPWOA (OMNI)
 360 degree Horizontal Spread & 6 degree Vertical Spread


Connector: N-female
Operating Environment: Outdoor
SPECIFICATIONS
MODEL:
FREQUENCY:
ANTENNA TYPE:
GAIN DBI:
SWR:
BEAMWIDTH DEGREE:
MOUNTING TYPE:
OPERATING TEMPERATURE:
DCE 2178HPWFA (FLAT)
5100 to 5900MHz
Unidirectional. Flat Panel
18
<=2.0
Horizontal 10, Vertical 10
Pole or Wall-mount
-40 to 70 degrees Celsius
MODEL:
FREQUENCY:
ANTENNA TYPE:
GAIN DBI:
SWR:
BEAMWIDTH DEGREE:
MOUNTING TYPE:
OPERATING TEMPERATURE:
DCE 2178HPWOA (OMNI)
5500 to 5825MHz
Omni-directional
10
<=2.0
Horizontal 360, Vertical 6
Pole or Wall-mount
-40 to 70 Degrees Celsius
MODEL:
FREQUENCY:
ANTENNA TYPE:
GAIN DBI:
SWR:
BEAMWIDTH DEGREE:
MOUNTING TYPE:
OPERATING TEMPERATURE:
DCE 2178HPWSA (SECTOR)
5150 to 5875MHz
Unidirectional, Sector
16.5
<=2.0
Horizontal 120, Vertical 10
Pole or Wall-mount
-40 to 70 Degrees Celsius
DCE 2178HPWSA (SECTOR)
 120 degree Horizontal Spread & 10 degree Vertical Spread


Connector: N-female
Operating Environment: Outdoor
FLAT & OMNI
OMNI
SECTOR & OMNI
20
DATA CONNECT ENTERPRISE
PHONE: 301.924.7400 EXT 17
3405 OLANDWOOD CT
FAX: 301.924.7403
OLNEY, MD 20832
USA
www.data-connect.com
INDUSTRIAL SOLUTIONS
NETWORK ANYWHERE
ETHERNET EXTENDERS
FOR YOUR NOTES
21
NOTES:
21
DATA CONNECT ENTERPRISE
PHONE: 301.924.7400 EXT 17
3405 OLANDWOOD CT
FAX: 301.924.7403
OLNEY, MD 20832
USA
www.data-connect.com
INDUSTRIAL SOLUTIONS
NETWORK ANYWHERE
22
DISTANCE AT
MAX. SPEED
RACK
MOUNT
DIN
MOUNT
5201V-BM
VDSL 2
4,593 FEET
100MBPS
BRIDGE MO- Copper Wire
DEM
900 FEET
YES
NO
24 5204V-BM
VDSL 2
4,593 FEET
100MBPS
BRIDGE MO- Copper Wire
DEM
900 FEET
YES
NO
27 5204V-MR
VDSL 2 MO- 4,593 FEET
100MBPS
DEM
Copper Wire
ROUTER
900 FEET
YES
NO
28 5204V-NRD
4,593 FEET
VDSL 2
Copper Wire 100MBPS
802.11N
& Wireless N
ROUTER
900 FEET
YES
NO
30 5208V-SMS
VDSL 2
4,593 FEET
100MBPS
SWITCH Copper Wire
SNMP 2-SFP
900 FEET
YES
NO
32 5224V-DSG
VDSL2
4,593 FEET
100MBPS
DSLAM
Copper Wire
120VAC
900 FEET
YES
NO
35 5248V-DSG
VDSL2
4,593 FEET
100MBPS
DSLAM
Copper Wire
48VDC
900 FEET
YES
NO
35 5201A-BM
UP TO
ADSL 2/2+ 20,000 FEET 24/3MBPS
BRIDGE MO- POTS Line UP/DOWN
DEM
STREAM
2,000FT
NO
NO
38 5201A-MR
UP TO
ADSL 2/2+ 20,000 FEET 24/3MBPS
MODEM
POTS Line UP/DOWN
ROUTER
STREAM
2,000FT
NO
NO
39 5204A-GRD
UP TO
20,000 FEET
ADSL 2/2+
24/3MBPS
POTS Line
802.11G
UP/DOWN
Wireless N
ROUTER
STREAM
2,000FT
NO
NO
40 5224A-DSG
UP TO
ADSL 2/2+ 20,000 FEET 24/3MBPS
DSLAM
POTS Line UP/DOWN
120VAC
STREAM
2,000FT
YES
NO
42 5248A-DSGUP TO
48
ADSL
2/2+
20,000
FEET
24/3MBPS
22
DSLAM
POTS Line UP/DOWN
48VDC
STREAM
2,000FT
YES
NO
44 MODEL
MAX. DISTANCE
VDSL2 & ADSL2/2+ SOLUTIONS
VDSL2 & ADSL2/2+ DISTANCE CHECK LIST
MAX.
SPEED
PHOTO
PAGE INDUSTRIAL SOLUTIONS
NETWORK ANYWHERE
VDSL2 & ADSL2/2+ SOLUTIONS
IN THIS SECTION & THE TECHNOGY
23
VDSL & ADSL 2/2+ SOLUTIONS
In This Section
1-Port Ethernet VDSL2 Bridge Modem
4-Port Ethernet VDSL 2 Bridge Modem
4-Port Ethernet VDSL 2 Modem Router
4-Port Ethernet VDSL 2 802.11n Router
8-Port Ethernet VDSL SNMP Switch 2-SFP
24-Port VDSL DSLAM 2-SFP 100-240VAC/48VDC
1-Port Ethernet ADSL 2/2+ Bridge Modem
1-Port Ethernet ADSL 2/2+ Modem Router
4-Port Ethernet ADSL2/2+ 802.11 Router
24-Port ADSL 2/2+ DSLAM 2-SFP 100-240VAC
48-Port ADSL 2/2+ DSLAM 2-SFP 100-240VAC
DSL Filter
DSL Splitter
Pg 24
Pg 27
Pg 28
Pg 30
Pg 32
Pg 35
Pg 38
Pg 39
Pg 40
Pg 42
Pg 44
Pg 45
Pg 46
The Technology
Both VDSL2 and ADSL2+ were developed with the same idea, the ability to provide the internet, in a cost efficient way, to millions of users worldwide. Both technologies have their good
points as well as their limitations. Both VDSL2 and ADSL2+ use existing telephone wire to
bring high speed internet contractions to business and homes. Finding the correct solution for
each deployment can be a challenge, we are here to assist you in making those choices.
VDSL2 is a modification of the previous VDSL standard. This was created to allow a greater
increase in bandwidth, up to 100Mbps, at a distance up to 900 feet. The increase in bandwidth
allows VDSL2 to be the perfect medium to provide triple-play technologies (Voice, Video, and
Data) to end users. Like ADSL2+, VDSL2 allows both voice and data to be transported over the
dame telephone line currently installed at most customer locations, without the need for expensive cabling to be done.
ADSL2+ is a modification of the ADSL standard first developed in the 1990’s. ADSL allows
both voice and data to be delivered on the same POTS line (Plain Old Telephone Line). The use
of filters and splitters help separate the voice and the data at the customer’s location. ADSL2+
can be deployed up to 20,000ft. but is usually limited to 14,000ft.; and, speeds can go as high as
24Mbits downstream and 3Mbits upstream. The data is delivered asymmetrically both to provide consumers with a higher downstream bandwidth, to provide internet content faster, as well
as a lower upstream limit to prevent attenuation issues as the CO (DSL DSLAM location).
At Data Connect, we offer a wide range of products to suite your network needs. We can assist you in finding a solution that maximizes your investment while providing the solutions that
will benefit your customers both now and for years to come. With the ability to reuse and preserve the current infrastructure at your customer’s locations, DSL is a wise choice to assist you
in providing broadband services to your customers.
23
INDUSTRIAL SOLUTIONS
NETWORK ANYWHERE
VDSL2 & ADSL2/2+ SOLUTIONS
1-PORT VDSL2 ETHERNET MODEM
24
DCE 5201V-BM
SPECIFICATIONS
The Data Connect 5201V-BM is a high speed 100/100Mbps Downstream / Upstream, over VDSL2 solution. The DCE 5201V-BM is designed based on two core networking technology, Ethernet and the
latest Very-high-data-rate Digital Subscriber Line. Our technology offers the absolute fastest data transmission speed over existing copper
telephone lines without the need of rewiring. The DCE 5201V-BM supports ultra-high performance to the pervasive telephone line network
with up to 100/100Mbps symmetric data rate within 384ft and 50/2Mbps
for 4,593ft long range connections.
The Data Connect 5102V-BM functions over existing telephone copper wires. In addition the DCE 5201V-BM is a Long Reach Ethernet
(LRE) extender providing one RJ-45 Ethernet port and one RJ-11 phone
jack for VDSL2 connection. By using the additional Splitter from the
DCE 5201V-BM-2PK (two pack), the splitter can allow POTS and
Ethernet to share the existing phone line; therefore, there is no need to
replace existing copper wiring. Just plug the DCE 5201V-BM with an
additional splitter into the existing RJ-11 telephone jack and a highperformance Ethernet extender network can be connected. The DCE
5201V-BM is ideal to be used as an Ethernet extender to an existing
Ethernet network.
The Data Connect 5201V-BM can deliver High-Demand service connectivity for ISP Triple Play devices. The DCE 5201V-BM provides excellent bandwidth to satisfy the triple play devices for home entertainment and communication. With the capability of 100/100Mbps symmetric data transmission, the DCE 5201V-BM enables many Multi-Media
services to work on local Internet services, such as VOD (Video on
Demand), Voice over IP, Video phone, IPTV, Internet caching server,
distance education, and many more.
The Data Connect 5201V-BM is a plug-and-play design and is fully
compatible with all kinds of network protocols. Moreover, the operating
status of each individual port and the whole system can be easily
viewed via the diagnostic LEDs on the front panel. The DCE 5201V-BM
offers two modes, CPE and CO, for application: CPE mode is used at
client side and CO mode is at central side. The CPE or CO mode can be
selected by using a built-in DIP switch. In a point-to-point configuration, there must be a CPE mode on one side and a CO mode on the
other side to perform a seamless Ethernet connection.
The Data Connect 5201V-BM features a symmetric Band-Plan for the
transmission of upstream and downstream signals. The band plan performs higher transmission quality in short range for central side (CO) in
symmetric mode. When the DCE 5201V-BM is in profile 17a operation
mode, it provides long distance Ethernet transmission with ultra high
performance to the telephone line network. When the DCE 5201V-BM is
in 30a operation mode, it provides short distance Ethernet transmission with higher speed performance in upstream and downstream traffic.
• 17a Profile
DISTANCE
SPEED
300m
86/65Mbps
400m
600m
86/52Mbps
81/36Mbps
800m
72/19Mbps
1000m
60/9Mbps
1200m
59/6Mbps
1400m
50/2Mbps
• 30a profile
DISTANCE
SPEED
300m
100/100Mbps
400m
90/90Mbps
600m
61/40Mbps
800m
54/8Mbps
24
DATA CONNECT ENTERPRISE
PHONE: 301.924.7400 EXT 17
PORTS
10/100BASE-TX - 1 RJ-45, Auto-Negotiation and Auto-MDI/MDI-X
VDSL - 1 RJ11, Female Phone Jack
PHONE - Additional Splitter for POTS Connection
DIP SWITCH & FUNCTIONALITY
4-Position DIP Switch
CO / CPE Mode Select
Selectable Fast and Interleaved Mode
Selectable Target 17A / 30A Profiles
Selectable Target SNR Mode
ENCODING
VDSL-DMT
ITU-T G.993.1 VDSL
ITU-T G.997.1
ITU-T 993.2 VDSL2 (Profile 17a/30a Support)
LED INDICATORS
One Power
Three for RJ-11/VDSL2
Two for each RJ-45 10/100Base-TX port
CABLING
Ethernet – 10Base-T: 2-Pair UTP Cat.3, 4, & 5 up to 100m (328ft)
- 100 Base-T: 2-Pair UTP Cat. 5 up to 100m (328ft)
VDSL – Twisted-Pair telephone wires (=> AWG24) up to 1.4km
POWER
Requirement – 5VDC, 2A
Consumption – 66.6 Watts / 22 BTU
DIMENSION (W x D x H) – 97x70x26mm, 3-13/16x2-3/4x1 (inches)
WEIGHT – 199grams, 44lbs.
ENVIRONMENT
Temperature
– Operating: 0 to 50 Degrees Celsius
-Storage: -10 to 70 Degrees Celsius
Relative Humidity – Operating: 10 to 90% (non-condensing)
-Storage: 10 to 90% (non-condensing)
SWITCH SPECIFICATIONS
Switch Processing Scheme – Store-and-Forward
Address Table – 1K Entries
Flow Control – Back Pressure for Half Duplex, IEEE 802.3x
-Pause Frame for Full Duplex
SWITCH FABRIC – 0.2Gbps
THROUGHPUT (Packet per Second) – 0.14Mbps
NETWORK CABLES
10/100Base-TX
2-Pair UTP Cat. 3, 4, 5 (100meters, max.)
EIA/TIA-568, 100-Ohm STP (100meters, max.)
REGULATORY COMPLIANCE
FCC Part 15 Class A
CE
STANDARDS COMPLIANCE
IEEE 802.3 10Base-T
IEEE 802.3U 100Base-TX
ITU-T G.993.1 VDSL
ITU-T G.997.1
ITU-T 993.2 VDSL2 (Profile 17a/30a Support)
ORDERING INFORMATION
DCE/5201V-BM-2PK VDSL2 Bridge Modem 2-Pack
DCE/5201V-BM
VDSL2 Bridge Modem
DCE/5201V-BM-RM
VDSL2 Bridge Rackmount
FEATURES & APPLICATIONS NEXT PAGE ————>
3405 OLANDWOOD CT
FAX: 301.924.7403
OLNEY, MD 20832
USA
www.data-connect.com
INDUSTRIAL SOLUTIONS
NETWORK ANYWHERE
VDSL2 & ADSL2/2+ SOLUTIONS
1-PORT VDSL2 ETHERNET MODEM
25
DCE 5201V-BM KEY FEATURES
Cost-Effective VDSL2 Profile 17a/30a CO / CPE Bridge Solution
One Box Design, CO / CPE selectable via Dip Switch
Defines symmetric band plan for the transmission of upstream and downstream signals
Complies with IEEE 802.3, 10Base-T, !EEE802.3u, 100Base-TX, and IEEE 802.3x, Flow Control Ethernet Standards
DMT (Discrete Multi-Tone) Line Coding
Half-Duplex Back Pressure and IEEE.3x Full-Duplex Pause Frame Flow Control
One RJ-11 Connector for VDSL port with VDSL Connection, additional Splitter for POTS Connection
Voice and Data Communication can be Shared Simultaneously Dases on the Existing Telephone Wire
One 10/100Mbps RJ-45 Port, Auto-Negotiation, and Auto-MDI/MDI-X
Supports up to 1536Bytes Packet Size, IEEE 802.1Q VLAN Tag Transparent
VDSL2 Stand-alone Transceiver for Simple Bridge Modem Application
Advantage of Minimum Installation Time (Simply as Plug-and-Play)
Selectable Target Profile and Target SNR margin
Supports Extensive LED Indicators for Network Diagnosis
Rackmount Version Available
Compact in Size, Easy Installation
DCE 5201V-BM APPLICATION
Last Mile of FTTx Deployment The DCE2178HSEE is an ideal solution for FTTx (Fiber to the Building, Fiber to the Campus or Fiber to the Node)
applications. It supports high bandwidth over existing telephone wires in the “last mile” from the ISP / Telecom / Service provider’s fiber node to
the buildings and customers' houses. The 10/100Mbps port of DCE 2178HSEE can be directly connected to a PC or to Ethernet devices such as
Ethernet Switches or Broadband Routers. It is excellent for phone line network built under Internet because every room or house could use the
APPLICATIONS CONTINUED NEXT PAGE ———————————>
25
DATA CONNECT ENTERPRISE
PHONE: 301.924.7400 EXT 17
3405 OLANDWOOD CT
FAX: 301.924.7403
OLNEY, MD 20832
USA
www.data-connect.com
INDUSTRIAL SOLUTIONS
NETWORK ANYWHERE
VDSL2 & ADSL2/2+ SOLUTIONS
1-PORT VDSL2 ETHERNET MODEM
26
Point-to-Point VDSL2 Solution
Two DCE 2178HSEE acting as a standalone pair is good for Ethernet distance extension over existing telephone wires. With just one
pair of AWG-24 copper wire, you can easily connect two Ethernet networks together with the data rate of maximum 100/100Mbps. With
the additional splitter, the telephone service can still be used while the DCE2178HSEE is in operation. The two solutions listed below
are typical applications for the Ethernet over VDSL2 Converter.
Multi-Dwelling Units / Multi-Tenant Units / Hospitality Solution
The DCE 2178HSEE is a perfect solution to quickly provide cost-effective yet high speed network services to multi-unit buildings such
as residential buildings (multi-dwelling units), commercial (multi-tenant units) buildings, hotels or hospitals. By utilizing the existing
telephony infrastructure, network installation is straightforward and requires no new wiring. With up to 100/100Mbps transmission,
Video on Demand, IP telephony and various broadband services can be easily provided.
26
DATA CONNECT ENTERPRISE
PHONE: 301.924.7400 EXT 17
3405 OLANDWOOD CT
FAX: 301.924.7403
OLNEY, MD 20832
USA
www.data-connect.com
INDUSTRIAL SOLUTIONS
NETWORK ANYWHERE
VDSL2 & ADSL2/2+ SOLUTIONS
4-PORT VDSL2 ETHERNET MODEM
27
DCE 5204V-BM
The Data Connect 5204V-BM is a four port high speed
100/100Mbps Downstream / Upstream, over VDSL2 solution. The
DCE 5204V-BM is designed based on two core networking technology, Ethernet and the latest Very-high-data-rate Digital Subscriber
Line. Our technology offers the absolute fastest data transmission
speed over existing copper telephone lines without the need of
rewiring. The DCE 5204V-BM supports ultra-high performance to
the pervasive telephone line network with up to 100/100Mbps symmetric data rate within 384ft and 50/2Mbps for 4,593ft long range
connections.
The Data Connect 5204V-BM functions over existing telephone
copper wires. In addition the DCE 5204V-BM is a Long Reach
Ethernet (LRE) extender providing four RJ-45 Ethernet port and one
RJ-11 phone jack for VDSL2 connection. By using the additional
Splitters from the DCE 5204V-BM-2PK (two pack), the splitter can
allow POTS and Ethernet to share the existing phone line; therefore,
there is no need to replace existing copper wiring. Just plug the
DCE 5204V-BM with an additional splitter into the existing RJ-11
telephone jack and a high-performance Ethernet extender network
can be connected. The DCE 5204V-BM is ideal to be used as an
Ethernet extender to an existing Ethernet network.
The Data Connect 5204V-BM can deliver High-Demand service
connectivity for ISP Triple Play devices. The DCE 5204V-BM provides excellent bandwidth to satisfy the triple play devices for home
entertainment and communication. With the capability of
100/100Mbps symmetric data transmission, the DCE 5204V-BM enables many Multi-Media services to work on local Internet services,
such as VOD (Video on Demand), Voice over IP, Video phone, IPTV,
Internet caching server, distance education, and many more.
The Data Connect 5204V-BM is a plug-and-play design and is
fully compatible with all kinds of network protocols. Moreover, the
operating status of each individual port and the whole system can
be easily viewed via the diagnostic LEDs on the front panel. The
DCE 5204V-BM offers two modes, CPE and CO, for application: CPE
mode is used at client side and CO mode is at central side. The CPE
or CO mode can be selected by using a built-in DIP switch. In a
point-to-point configuration, there must be a CPE mode on one side
and a CO mode on the other side to perform a seamless Ethernet
connection.
The Data Connect 5204V-BM features a symmetric Band-Plan for
the transmission of upstream and downstream signals. The band
plan performs higher transmission quality in short range for central
side (CO) in symmetric mode. When the DCE 5204V-BM is in profile
17a operation mode, it provides long distance Ethernet transmission with ultra high performance to the telephone line network.
When the DCE 5204V-BM is in 30a operation mode, it provides short
distance Ethernet transmission with higher speed performance in
upstream and downstream traffic.
• 17a Profile
DISTANCE
SPEED
300m
400m
600m
86/65Mbps
86/52Mbps
81/36Mbps
800m
72/19Mbps
1000m
60/9Mbps
1200m
59/6Mbps
1400m
50/2Mbps
SPECIFICATIONS
PORTS
10/100BASE-TX - 4 RJ-45, Auto-Negotiation and Auto-MDI/MDI-X
VDSL - 1 RJ11, Female Phone Jack
PHONE - Additional Splitter for POTS Connection
DIP SWITCH & FUNCTIONALITY
4-Position DIP Switch
CO / CPE Mode Select
Selectable Fast and Interleaved Mode
Selectable Target 17A / 30A Profiles
Selectable Target SNR Mode
ENCODING
VDSL-DMT
ITU-T G.993.1 VDSL
ITU-T G.997.1
ITU-T 993.2 VDSL2 (Profile 17a/30a Support)
LED INDICATORS
One Power
Three for RJ-11/VDSL2
Two for each RJ-45 10/100Base-TX port
CABLING
Ethernet – 10Base-T: 2-Pair UTP Cat.3, 4, & 5 up to 100m (328ft)
- 100 Base-T: 2-Pair UTP Cat. 5 up to 100m (328ft)
VDSL – Twisted-Pair telephone wires (=> AWG24) up to 1.4km
POWER
Requirement – 5VDC, 2A
Consumption – 66.6 Watts / 22 BTU
DIMENSION (W x D x H) – 97x70x26mm, 3-13/16x2-3/4x1 (inches)
WEIGHT – 199grams, 44lbs.
ENVIRONMENT
Temperature
– Operating: 0 to 50 Degrees Celsius
-Storage: -10 to 70 Degrees Celsius
Relative Humidity – Operating: 10 to 90% (non-condensing)
-Storage: 10 to 90% (non-condensing)
SWITCH SPECIFICATIONS
Switch Processing Scheme – Store-and-Forward
Address Table – 1K Entries
Flow Control – Back Pressure for Half Duplex, IEEE 802.3x
-Pause Frame for Full Duplex
SWITCH FABRIC – 0.2Gbps
THROUGHPUT (Packet per Second) – 0.14Mbps
NETWORK CABLES
10/100Base-TX
2-Pair UTP Cat. 3, 4, 5 (100meters, max.)
EIA/TIA-568, 100-Ohm STP (100meters, max.)
REGULATORY COMPLIANCE
FCC Part 15 Class A
CE
STANDARDS COMPLIANCE
IEEE 802.3 10Base-T
IEEE 802.3U 100Base-TX
ITU-T G.993.1 VDSL
ITU-T G.997.1
ITU-T 993.2 VDSL2 (Profile 17a/30a Support)
• 30a profile
DISTANCE
SPEED
300m
100/100Mbps
400m
600m
90/90Mbps
61/40Mbps
800m
54/8Mbps
ORDERING INFORMATION
DCE/5204V-BM-2PK VDSL2 4-Port Bridge Modem 2-Pack
DCE/5204V-BM
VDSL2 4-Port Bridge Modem
DCE/5204V-BM-RM
VDSL2 4-Port Bridge Rackmount Modem
27
<———————————— PREVIOUS PAGE
DATA CONNECT ENTERPRISE
PHONE: 301.924.7400 EXT 17
3405 OLANDWOOD CT
FAX: 301.924.7403
OLNEY, MD 20832
USA
www.data-connect.com
INDUSTRIAL SOLUTIONS
NETWORK ANYWHERE
VDSL2 & ADSL2/2+ SOLUTIONS
4-PORT VDSL2 MODEM ROUTER
28
DCE 5204V-MR
The DCE 5204V-BR is a Hyper Extend VDSL2 Bridge/Router is based
on two core networking technologies, VDSL2 and Ethernet. VDSL2 is
known as Very High Digital Subscriber Line 2. The DCE 5204V-BR provides very high performance access to the internet with speed up to
100Mbps for both downstream and upstream data transmission. The DCE
5204V-BR offers hyper extend the fastest data transmission speeds over
existing copper telephone lines without the need for rewiring.
The DCE 5204V-BR complies with ITU-T G993.2 standard that is defined as a very high speed transceiver that converts Ethernet to VDSL2
and from VDSL2 back to Ethernet. The DCE 5204V-BR offers two modes
of operation, bridge or router. With built in 4-Port 10/100 Ethernet switch
the DCE 4204V-BR allows for Triple Play (Data, Voice, & TV) for both residential and small to large Enterprise.
There are selectable operating modes in the DCE 5204V-BR, CO and
CPE. Users can setup Point-to-Point application by connecting two DCE
5204V-BR hyper extenders, one in CO mode and another in CPE mode.
This allows High Speed data, voice and video (TV) transmission between
two networks over existing copper telephone lines.
Via the user-friendly management interface, the DCE 5204V-BR is managed easily through standard web browsers. Furthermore, the DCE
5204V-BR not only provides basic router functions such as DHCP Server,
Virtual Server, DMZ, QoS, and UPnP; but also, full firewall functions such
as Network Address Translation (NAT), IP/Port/MAC Filtering and Content
Filtering. The DCE 5204V-BR serves as an Internet Firewall to protect
your network from being accessed by unauthorized users.
FEATURES
Shared Internet Access
Built-in VDSL2 Modem
Multiple WAN Connection
CO & CPE Support
Bridge & Router Application
Virtual Servers
Simple Firewall with NAT Technology
Universal Plug & Play (UPnP)
Selectable VDSL2 Profiles (30a, 17a, 12a, 12b, 8a, 8b, 8c, & 8d)
User Friendly Interface Web UI
DMZ Support
RIP1/2 Routing
VPN Pass-through Support
4-Port Switch
DHCP Server Support
SPECIFICATIONS
STANDARDS
VDSL2-DMT
Compliant with VDSL2 ITU-T G.993.2
(8a, 8b, 8c, 8d, 12a, 12b, 17a, 30a)
G997 / G998 Band Plan Support
Supports up to 100Mbps Upstream & Downstream
Compliant with IEEE802.3 / 802.3u
U0 Band Support (25KHz to 276KHz)
Packet Transfer Mode Ethernet in the First Mile (PTM-EFM)
PORTS
Four 10/100Base-TX, Auto-Negotiation, Auto MDI/MDI-X
One RJ-11 and built-in splitter for POTS connection
One RJ-11 VDSL2 connection
LED INDICATORS - PWR, DSL, LAN1-4
BUTTON - RESET
MAX IMUM SESSIONS - 4,096
VPN - VPN Pass-through
MANAGEMENT - Web-Based Configuration
VDSL2 FUNCTIONALITY
CO / CPE Mode Selection
Selectable Fast & Interleave Mode
Selectable VDSL2 Profiles
Bandwidth Limitation Support
PROTOCOL / FEATURE
Router & Bridge Mode
Static Routing & RIP V1/2
DMZ & Virtual Server
802.1D
QOS
SNTP
DHCP Server / Client
IGMP Proxy & DNS Proxy
UPnP & DDNS
SNMP v1/v2c (Enhanced with Future FW upgradeable)
TR-069 (Enhanced with Future FW upgradeable)
SECURITY
Built-in NAT Firewall
MAC / IP / Port Filtering
Content Filtering
SPI Firewall Support
Password Protection for System Management
TEMPERATURE
Operating - 0 to 50 Degrees Celsius
Storage -20 to 70 Degrees Celsius
HUMIDITY
Operating - 5 to 90% (Non-condensing)
Storage – 0 to 95% (Non-condensing)
EMISSION – FCC, CE
ORDERING INFORMATION
DCE/5204V-MR
DIMENSION (W x H x H) – 186mm x 143mm x 35mm
POWER - 12VDC, 1A
4-PORT VDSL2 30a MODEM ROUTER
APPLICATIONS NEXT PAGE ————————>
28
DATA CONNECT ENTERPRISE
PHONE: 301.924.7400 EXT 17
3405 OLANDWOOD CT
FAX: 301.924.7403
OLNEY, MD 20832
USA
www.data-connect.com
INDUSTRIAL SOLUTIONS
NETWORK ANYWHERE
29
VDSL2 & ADSL2/2+ SOLUTIONS
4-PORT VDSL2 MODEM ROUTER
PEER-TO-PER NETWORK CONNECTION
A pair of the DCE 5204V-BR, one CO and the other one CPE is good for Ethernet distance extension over existing telephone wires. With just
one pair of AWG-24 copper wire, you can easily connect two Ethernet Networks together with the data rate of maximum 100/100Mbps. Telephone Service can still be used while the modems are in operation.
VERY HIGH-SPEED INTERNET CONNECTION WITH WIRED
The DCE 5204V-BR is the perfect solution for a small group of users who require Very high-speed broadband Internet connection It allows multiple users to access the Internet simultaneously. The DCE 5204V-BR is compliant with VDSL2 standard that allows downstream and upstream
rates up to 100mbps. The DCE 5204V-BR also incorporates a 4-Port 10/100Base-TX switching hub to easily create or extend your
LAN, and prevent the attacks from the Internet.
29
DATA CONNECT ENTERPRISE
PHONE: 301.924.7400 EXT 17
3405 OLANDWOOD CT
FAX: 301.924.7403
OLNEY, MD 20832
USA
www.data-connect.com
INDUSTRIAL SOLUTIONS
NETWORK ANYWHERE
VDSL2 & ADSL2/2+ SOLUTIONS
4-PORT VDSL WIRELESS N ROUTER
30
DCE 5204V-NRD
The DCE 5204V-NRD is an IEEE 802.11n wireless VDSL2 Router that utilizes
2T2R MIMO antenna technology and allows residential and corporate users the
ideal solution for sharing a high-speed & hyper extended VDSL2 connection
and four physical 10/100Mbps Fast Ethernet backbone. The DCE 5204V-NRD is
based on three technologies IEEE 802.11b/g/n, Ethernet, and VDSL2 (Very High
Digital Subscriber Line 2). Via VDSL2 technology, the DCE 204V-NRD offers
very high performance access to the Internet, up to 100Mbps for both downstream and upstream data transmission. VDSL2 offers the absolute fastest data
transmission speed over existing copper telephone lines without the need for
rewiring.
The DCE 5204V-NRD complies with ITU-T G993.2 standard that is defined as a
very high speed transceiver that converts Ethernet to VDSL2 and from VDSL2
back to Ethernet. The DCE 5204V-NRD offers two modes of operation, bridge or
router. With built in 4-Port 10/100 Ethernet switch the DCE 4204V-NRD allows
for Triple Play (Data, Voice, & TV) for both residential and small to large Enterprise. The DCE5204V-NRD incorporates IEEE 802.11b/g and 802.11n that allows
any computer and wireless-enabled network device connect to it without additional cabling. The IEEE 802.11n (Draft 2.0) wireless capability brings users the
highest speed of wireless ever experienced with data transmission rates as
high as 300Mbps. The radio coverage is also doubled to offer high speed wireless connection wide-open space. To secure wireless communication, the
DCE5204V-NRD supports the most up to date encryption, WEP, WPA-PSK, and
WPA2-PSK. In addition the DCE5204V NRD supports WPS configuration with
PBC/PIN type for users. This feature allows users to easily connect to a secured wireless network.
There are selectable operating modes in the DCE 5204V-NRD, CO and CPE.
Users can setup Point-to-Point application by connecting two DCE 5204V-NRD
hyper extenders, one in CO mode and another in CPE mode. This allows High
Speed data, voice and video (TV) transmission between two networks over existing copper telephone lines.
Via the user-friendly management interface, the DCE 5204V-NRD is managed
easily through standard web browsers. Furthermore, the DCE 5204V-NRD not
only provides basic router functions such as DHCP Server, Virtual Server, DMZ,
QoS, and UPnP; but also, full firewall functions such as Network Address
Translation (NAT), IP/Port/MAC Filtering and Content Filtering. The DCE 5204VNRD serves as an Internet Firewall to protect your network from being accessed
by unauthorized users.
FEATURES
Shared Internet Access
Built-in VDSL2 Modem
Multiple WAN Connection
CO & CPE Support
Bridge & Router Application
Virtual Servers
Simple Firewall with NAT Technology
Universal Plug & Play (UPnP)
Selectable VDSL2 Profiles (30a, 17a, 12a, 12b, 8a, 8b, 8c, & 8d)
User Friendly Interface Web UI
DMZ Support
RIP1/2 Routing
VPN Pass-through Support
4-Port Switch
DHCP Server Support
Support IEEE 802.11b, g and 802.11n Wireless Stations
Two External Antennas with MIMO Technology
WPS Push Button Control
WEP Support
WPA-PSK Encryption Support
Wireless MAC Access Control
ORDERING INFORMATION
30
DCE 5204V-NRD 4-PORT VDSL2 30a WIRELESS ROUTER DEVICE
DATA CONNECT ENTERPRISE
PHONE: 301.924.7400 EXT 17
SPECIFICATIONS
STANDARDS
VDSL2-DMT
Compliant with VDSL2 ITU-T G.993.2
(8a, 8b, 8c, 8d, 12a, 12b, 17a, 30a)
G997 / G998 Band Plan Support
Supports up to 100Mbps Upstream & Downstream
Compliant with IEEE802.3 / 802.3u
U0 Band Support (25KHz to 276KHz)
Packet Transfer Mode Ethernet in the First Mile (PTM-EFM)
PORTS
Four 10/100Base-TX, Auto-Negotiation, Auto MDI/MDI-X
One 802.11b/g/n Access Point, Two Antennas
One RJ-11 and built-in splitter for POTS connection
One RJ-11 VDSL2 connection
LED INDICATORS - PWR, DSL, LAN1-4
BUTTON – RESET
WIRELESS STANDARD – IEEE 802.11b, g & 802.11n (Draft 2.0)
FREQUENCY – 2.4 TO 2.4835GHz (Industrial Scientific Medical
Band)
CHANNELS – Maximum 14 Channels, depending on regulatory
authorities
ANTENNA CONNECTOR – Two 2dBi detachable Antenna
WIRELESS DATA ENCRYPTION – 64bit / 128bit WEP, WPAPSK, WPA, WPA2, 802.11x ENCRYPTION, and WPS PBC
WIRELESS DATA RATE
IEEE 802.11b: 1/2/5.5/11Mbps
IEEE 802.11g: 6/9/12/18/24/36/48/54Mbps
IEEE 802.11n: 14/29/43/58/87/116/130/144Mbps in 20MHz
30/60/90/120/150/180/240/270/300Mbps in 40MHz
MAX IMUM SESSIONS - 4,096
VPN - VPN Pass-through
MANAGEMENT - Web-Based Configuration
VDSL2 FUNCTIONALITY
CO / CPE Mode Selection
Selectable Fast & Interleave Mode
Selectable VDSL2 Profiles
Bandwidth Limitation Support
PROTOCOL / FEATURE
Router, Bridge, & WISP Mode
WDS & WPS
Static Routing & RIP V1/2
DMZ & Virtual Server
802.1D
QOS
SNTP
DHCP Server / Client
IGMP Proxy & DNS Proxy
UPnP & DDNS
SNMP v1/v2c (Enhanced with Future FW upgradeable)
TR-069 (Enhanced with Future FW upgradeable)
SECURITY
Built-in NAT Firewall
MAC / IP / Port Filtering
Content Filtering
SPI Firewall Support
Password Protection for System Management
TEMPERATURE
Operating - 0 to 50 Degrees Celsius
Storage -20 to 70 Degrees Celsius
HUMIDITY
Operating - 5 to 90% (Non-condensing)
Storage – 0 to 95% (Non-condensing)
EMISSION – FCC, CE
APPLICATIONS NEXT PAGE ————————>
3405 OLANDWOOD CT
FAX: 301.924.7403
OLNEY, MD 20832
USA
www.data-connect.com
INDUSTRIAL SOLUTIONS
NETWORK ANYWHERE
31
VDSL2 & ADSL2/2+ SOLUTIONS
4-PORT VDSL WIRELESS N ROUTER
PEER-TO-PER NETWORK CONNECTION
A pair of the DCE 5204V-NRD, one CO and the other one CPE is good for Ethernet distance extension over existing telephone wires. With just one
pair of AWG-24 copper wire, you can easily connect two Ethernet Networks together with the data rate of maximum 100/100Mbps. Telephone Service can still be used while the modems are in operation.
VERY HIGH-SPEED INTERNET CONNECTION WITH WIRED / WIRELESS
The DCE 5204V-NRD is the perfect solution for a small group of users who require Very high-speed broadband Internet connection It allows multiple
users to access the Internet simultaneously. The DCE 5204V-NRD is compliant with VDSL2 standard that allows downstream and upstream rates up
to 100mbps.
The DCE 5204V-NRD is compliant with IEEE 802.11n technology. The DCE 5204-NRD provides a better wireless signal, higher data rate, and performance than 802.11g compliant routers. Furthermore, the DCE 5204-NRD features the latest security and firewall functions to prevent unauthorized access or invasion. There are simple, step by step, set up instructions within the Wizard that allows you immediate access to the wireless network and
high speed Internet transmission in your home or office.
The DCE 5204V-NRD also incorporates a 4-Port 10/100Base-TX switching hub to easily create or extend your LAN, and prevent the attacks from the
Internet.
31
DATA CONNECT ENTERPRISE
PHONE: 301.924.7400 EXT 17
3405 OLANDWOOD CT
FAX: 301.924.7403
OLNEY, MD 20832
USA
www.data-connect.com
INDUSTRIAL SOLUTIONS
NETWORK ANYWHERE
VDSL2 & ADSL2/2+ SOLUTIONS
8-PORT SNMP SWITCH W./ 2-SFP
32
DCE 5208V-SMS
DCE 5208V-SMS with Hyper Extend is an 8-Port VDSL managed
CO (Central Office) switch with 2-Port Gigabit TP / SFP combo interfaces. The VDSL2 CO switch is perfectly designed for the networking applications of a Community Network Service Provider, SI
(System Integration), IP Surveillance Provider, and many other applications. DCE 5208V-SMS is based on two core networking technology, Ethernet and VDSL2 (Very-high-data-rate Digital Subscriber Line
2). By networking with the DCE 5201V-BM, DCE 5204V-BM, DCE
5204V-MR, and DCE 5204V-NRD CPE (Customer Premises Equipment) with the DCE 5208V-SMS, Data Connect offers the absolutely
fastest data transmission speeds over existing copper telephone
lines that provides the ideal solution in the last mile.
Each VDSL2 interface of the DCE 5208V-SMS provides two copper
phone ports, one for VDSL2 connection and the other one for POTS
(Plain Old Telephone Service) connection. The DCE 5208V-SMS has
a unique built-in splitter that allows voice, data, and streaming video
(TV) to operate simultaneously over each VDSL2 2-Wire interface
with no interruption.
FEATURES






Delivers High-Demand Services Connectivity for ISP /
Triple Play Devices
Traffic Flow QoS Ensuring for Application Services
Selectable VDSL2 Data Rate for Service Differentiation
Console & Telnet CLI (Command Line Interface) and Advance WEB & SNMP management interfaces.
Link Aggregation, 802.1Q, Rapid Spanning Tree, IGMP
Snooping & Bandwidth Control
Access Control List (ACL), RADIUS, 802.1X, MAC Filter,
FLOW CONTROL
Back pressure for Half – Duplex
IEEE 802.3x Pause Frame for Full – Duplex
LED
System: Power, Status
Alert: Fan 2, Fan 3 alert
VDSL: VDSL Link/Sync
Gigabit Port: 1000 Link/Active, 100 Link/Active
RESET BUTTON
< 5sec: System Reboot
>10sec: Factory Default
DIMENSION (W x D x H) – 440 x 200 x 44mm, 1U height
WEIGHT – 2.9kg
POWER REQUIREMENT – 100-240vac, 50-60Hz
POWER CONSUMPTION – 58Watts
DISSIPATION - 184 BTU/hr maximum
OTHER - Reset Button for system reset & Reset to factory default
VDSL2 STANDARD
Comply with ITU-T G.993.1 & G.993.2
Supports provisioning the VDSL optional band (25K to 138K Hz) usage
BAND PLAN
Selectable band plan for each VDSL line on a per port basis
Band Plan A: Profile 998, Annex A of G.993.1; Optimized for Symmetrical Services
Band Plan B: Profile 997, Annex A of G993.1; Optimized for Asymmetrical Services
PROFILE
Selectable spectrum profile of 8a/b/c/d, 12a/b, 17a, & 30a for frequency bands
(Annex A, B, & C) defined in G.993.2
ORDERING INFORMATION
DCE 5208V-SMS25
SPECIFICATIONS (CONT’D)
8-PORT VDSL SNMP SWITCH 2-SFP
ENCODING – VDSL-DMT
VDSL2 FEATURES
Selectable Rate Limit Control
Selectable Target SNR (Signal to Noise Ratio) mode
POTS voices pass through
SPECIFICATIONS
VDSL INTERFACE
8-Port VDSL2, RJ-11 Connector
8-Port POTS Telephone, RJ-11 Connector
1000MBPS COPPER PORTS
Two 10/100/1000Mbps RJ-45 Auto- negotiation, Auto MDI/MDI-X
SFP/MINI-GBIC SLOTS
Two 1000Base-SX/LX/BX, shared with Port -9 & Port-10
CONSOLE - One RS232 Serial Port (DB9, 57600, N, 8, 1)
SURGE PROTECTION – 3KV
SWITCH ARCHITECTURE – Store –and-Forward
SWITCH FABRIC – 5.6Gbps / non-blocking
SWITCH THROUGHPUT – 4.16mbps @ 64Bytes
ADRESS TABLE – 8K Entries
SHARED DATA BUFFER – 256Kbps
MAXIMUM FRAME SIZE – 9K Bytes
MANAGEMENT INTERFACE
Console, Telnet, Web Browser, SSL, SNMPv1 / v2c / v3
GIGABIT PORT CONFIGUATION
Port disable / enable
Auto-negotiation
10/100/1000Mbps Full & Half Duplex mode selection
Flow Control disable / enable
GIGABIT PORT STATUS
Display port’s speed duplex mode, Link & Flow Control Status
Auto-negotiation status & trunk status
32
DATA CONNECT ENTERPRISE
PHONE: 301.924.7400 EXT 17
3405 OLANDWOOD CT
FAX: 301.924.7403
OLNEY, MD 20832
USA
www.data-connect.com
INDUSTRIAL SOLUTIONS
NETWORK ANYWHERE
VDSL2 & ADSL2/2+ SOLUTIONS
8-PORT SNMP SWITCH W./ 2-SFP
33
SPECIFICATIONS(CONT’D)
SPECIFICATIONS (CONT’D)
PORT MIRRORING – TX / RX / Both, 1 to 1 Monitor
BANDWIDTH CONTROL
Ingress / Egress rate limit control
Gigabit Port – Allow to configure per 128Kbps
VDSL2 Port – Allow to configure per 5Mbps
VLAN
IEEE 802.1Q Tag-based VLAN, up to 256 VLANs groups, out of 4041 VLAN IDs
Port-based VLAN
GVRP, up to 128 dynamic VLAN groups
Q-in-Q tunneling
Private VLAN Edge (PVE / Protected port) with two protected port groups
LINK AGGREGATION
Static Port Trunk
IEEE 802.3ad LACP (Link Control Protocol)
Supports 13 groups of 8–Port trunk support
REGULATION COMPLIANCE
FCC Part 15 Class A, CE
IEEE 802.3
10Base-T
IEEE 802.3u
100Base-TX
IEEE 802.3z
1000Base-SX/LX
IEEE 802.3ab
1000Base-T
IEEE 802.3x
Flow Control & Back Pressure
IEEE 802.3ad
Port trunk with LACP
IEEE 802.1D
Spanning Tree Protocol
IEEE 802.1w
Rapid Spanning Tree Protocol
IEEE 802.1p
Class of Service
IEEE 802.1Q
VLAN Tagging
STANDARDS COMPLIANCE
IEEE 802.1x
Port Authentication Network Control
ITU-T
G.993.1 (VDSL)
G.997.1
G993.2 VDSL2 (Profile 30a Support), Annex A
RFC-768
UDP
RFC-793
TFTP
RFC-791
IP
RFC-792
ICMP
RFC-2068
HTTP
RFC-1112
IGMP VERSION 1
RFC-2236
IGMP VERSION 2
QOS
4 priority queue
Traffic classification based on
Port priority
802.1p priority
DSCP/TOS field in IP Packet
VoIP QoS by application protocol number
IGMP SNOOPING
IGMP (v1/v2) Snooping, up to 256 multicast Groups
ACCESS CONTROL LIST
IP-Based Layer 3 / Layer 4 ACL
Up to 220 ACL rule entries
SECURITY
Port Security (Disable Per Port of MAC Address Learning)
Status MAC, MAC filter, IPMAC Binding
SNMP MIBS
RFC-1213 MIB-II
RFC-2863 Interface MIB
RFC-2665 Ether-Like MIB
RFC-1493 Bridge MIB
RFC-2819 RMON MIB (Group 1, 2, 3, & 9)
RFC-2737 Entity MIB
CABLES
VDSL2: Twisted –Pair telephone wires (AWG24 or better) up to .87
miles
10/100Base-TX: 2-Pair UTP Cat.5, up to 328ft
1000Base-T: 4-pair UTP Cat.5E, up to 328ft
1000Base-SX: 50/125µm & 62.5/125µm fiber optic cable up to 1,084ft
1000Base-LX: 9/125µm fiber optic cable, up to 6.3 miles, 50/125µm &
62.5/125µm fiber optic cable, up to 1,805ft
ENVIRONMENT
OPERATING TEMPERATURE – 0 to 50 ºC
OPERATING RELATIVE HUMIDITY – 10 to 90% (non-condensing)
STORAGE TEMPERATURE – -10 to 70ºC
STORAGE RELATIVE HUMIDITY – 10 to 90% (non-condensing)
DCE 5208V-SMS APPLICATIONS
MTU / MDU / HOSPITALITY SOLUTION
IPV, VOD, and digital message broadcasting services are the worldwide hot trends. More and more services providers have gradually upgraded the
client side devices from analog system to digital system. The DCE 5208V-SMS is a VDSL2 CO Switch and DCE 5201V-BM, DCE 5204V-BM, and the
DCE5204V-NRD CPEs provide cost-effective and high speed network services by utilizing the existing telephone wire infrastructure. The IP network
installation is straight forward and requires no new wiring. With the capability of 100/100Mbps symmetric, the 5208V-SMS enables Video on Demand
(VOD), Voice over IP (VOP), Video Phone, IPTV, and Distance Education. The DCE 5208V-SMS provides excellent bandwidth to satisfy the triple play
devices for education, entertainment, and communication.
APPLICATIONS CONT’D NEXT PAGE ———————>
33
DATA CONNECT ENTERPRISE
PHONE: 301.924.7400 EXT 17
3405 OLANDWOOD CT
FAX: 301.924.7403
OLNEY, MD 20832
USA
www.data-connect.com
INDUSTRIAL SOLUTIONS
NETWORK ANYWHERE
VDSL2 & ADSL2/2+ SOLUTIONS
8-PORT SNMP SWITCH W./ 2-SFP
34
DCE 5208V-SMS APPLICATIONS CONT’D
LAST MILE OF FTTs DEPLOYMENT
The DCE 5208V-SMS provides up to 100/100Mbps symmetric data rate up to 984 feet and in long range connections, the DCE 5208V-SMS provides
ultra-high performance to the telephone line network. With the two built-in mini-GBIC 1000Base-SX/LX SFP (Small Form-Factor Pluggable) interfaces,
the deployed distance of the DCE 5208V-SMS can be extended from 1,815 feet (Multi-mode fiber) up to 74.5 mile Single-mode fiber. The long distance
capability of the DCE 5208V-SMS allows for FTTB (Fiber to the Building), FTTC (Fiber to the Campus), and FTTH (Fiber to the Home). The DCE 5208VSMS provides high bandwidth via VDSL over existing telephone wires in the “last mile” from the ISP, Telecom, or Service provider’s fiber node to
commercial buildings and customers’ homes.
34
DATA CONNECT ENTERPRISE
PHONE: 301.924.7400 EXT 17
3405 OLANDWOOD CT
FAX: 301.924.7403
OLNEY, MD 20832
USA
www.data-connect.com
INDUSTRIAL SOLUTIONS
NETWORK ANYWHERE
VDSL2 & ADSL2/2+ SOLUTIONS
24-PORT VDSL2 WIRELESS G 2-SFP DSLAM
35
DCE 5224V-DSGSFP & DCE5248V-DSGSFP
DCE 5224V-DSGSFP & 5248V-DSGSFP with Hyper Extend are 24-Port
VDSL2 managed CO (Central Office) switches with two TP and SFP
shared combo Ethernet Interfaces. The VDSL2 CO switches arre perfectly designed for the networking applications of Telecom, ISP
(Internet Service Provider), SI (System Integration), IP Surveillance Provider, and many other applications. DCE 5224V-DSGSFP & 5248VDSGSFP are based on two core networking technology, Ethernet and
VDSL2 (Very-high-data-rate Digital Subscriber Line 2). By networking
with the DCE 5201V-BM, DCE 5204V-BM, DCE 5204V-MR, and DCE
5204V-NRD CPE (Customer Premises Equipment) with the DCE 5224VDSGSFP & DCE 5248V-DSG-SFP, Data Connect offers the absolutely
fastest data transmission speeds over existing copper telephone lines
that provides the ideal solution in the last mile.
Each VDSL2 interface of the DCE 5224V-DSGSFP provides two copper phone ports, one for VDSL2 connection and the other one for POTS
(Plain Old Telephone Service) connection. The DCE 5224V-DSGSFP
has a unique built-in splitter that allows voice, data, and streaming
video (TV) to operate simultaneously over each VDSL2 2-Wire interface
FEATURES






Delivers High-Demand Services Connectivity for ISP /
Triple Play Devices
Traffic Flow QoS Ensuring for Application Services
Selectable VDSL2 Data Rate for Service Differentiation
Console & Telnet CLI (Command Line Interface) and Advance WEB & SNMP management interfaces.
Link Aggregation, 802.1Q, Rapid Spanning Tree, IGMP
Snooping & Bandwidth Control
Access Control List (ACL), RADIUS, 802.1X, MAC Filter,
Static MAC, IPMAC, IP/MAC Binding, & Port Security
ORDERING INFORMATION
DCE/5224V-DSGFP
DCE,5248V-DSGFP
24 PORT VDSL2 SFP DSLAM 120VAC
24 PORT VDSL 2SFP DSLAM 48VDC
APPLICATIONS
LAST MILE OF FTTs DEPLOYMENT
The DCE 5224V-DSGSFP & DCE 5248V-DSGSFP provide up to 100/100Mbps symmetric data rate up to 984 feet and in long range connections, the
DCE 5224V-DSGFP provides ultra-high performance to the telephone line network. With the two built-in mini-GBIC 1000Base-SX/LX SFP (Small FormFactor Pluggable) interfaces, the deployed distance of the DCE 5208V-DSGSFP & DCE 5248V-DSGSFP can be extended from 1,815 feet (Multi-mode
fiber) up to 74.5 mile Single-mode fiber. The long distance capability of the DCE 5224V-DSGSFP & DCE 5248V-DSGSFP allow for FTTB (Fiber to the
Building), FTTC (Fiber to the Campus), and FTTH (Fiber to the Home). The DCE 5224V-DSGSFP & DCE 5248V-DSGSFP provide high bandwidth via
VDSL over existing telephone wires in the “last mile” from the ISP, Telecom, or Service provider’s fiber node to commercial buildings and customers’
35
DATA CONNECT ENTERPRISE
PHONE: 301.924.7400 EXT 17
3405 OLANDWOOD CT
FAX: 301.924.7403
OLNEY, MD 20832
USA
www.data-connect.com
INDUSTRIAL SOLUTIONS
NETWORK ANYWHERE
VDSL2 & ADSL2/2+ SOLUTIONS
24-PORT VDSL2 WIRELESS G 2-SFP DSLAM
36
DCE 5224/48V-DSGFP APPLICATIONS CONT’D
MTU / MDU / HOSPITALITY SOLUTION
IPV, VOD, and digital message broadcasting services are the worldwide hot trends. More and more services providers have gradually upgraded the
client side devices from analog system to digital system. The DCE 5224V-DSGSFP & DCE 5248V-DSGSFP is a VDSL2 CO Switch and DCE 5201V-BM,
DCE 5204V-BM, and the DCE5204V-NRD CPEs provide cost-effective and high speed network services by utilizing the existing telephone wire infrastructure. The IP network installation is straight forward and requires no new wiring. With the capability of 100/100Mbps symmetric, the DCE 5224VDSGSFP & DCE 5248V-DSGSFP enable Video on Demand (VOD), Voice over IP (VOP), Video Phone, IPTV, and Distance Education. The DCE 5224VDSGSFP & DCE 5248V-DSGSFP provide excellent bandwidth to satisfy the triple play devices for education, entertainment, and communication.
DCE 5224V-DSGSFP & DCE 5224V-DSGSFP SPECIFICATIONS
CABLES
VDSL2: Twisted –Pair telephone wires (AWG24 or better) up to .87 miles
10/100Base-TX: 2-Pair UTP Cat.5, up to 328ft
1000Base-T: 4-pair UTP Cat.5E, up to 328ft
1000Base-SX: 50/125µm & 62.5/125µm fiber optic cable up to 1,084ft
1000Base-LX: 9/125µm fiber optic cable, up to 6.3 miles, 50/125µm &
36
DATA CONNECT ENTERPRISE
PHONE: 301.924.7400 EXT 17
ENVIRONMENT
OPERATING TEMPERATURE – 0 to 40 ºC
OPERATING RELATIVE HUMIDITY – 10 to 90% (non-condensing)
STORAGE TEMPERATURE – -10 to 70ºC
STORAGE RELATIVE HUMIDITY – 10 to 90% (non-condensing)
SPECIFICATIONS CONT’D NEXT PAGE ——>
3405 OLANDWOOD CT
FAX: 301.924.7403
OLNEY, MD 20832
USA
www.data-connect.com
INDUSTRIAL SOLUTIONS
NETWORK ANYWHERE
VDSL2 & ADSL2/2+ SOLUTIONS
24-PORT VDSL2 WIRELESS G 2-SFP DSLAM
37
DCE 5224V-DSGSFP & DCE 5248V-DSGSFP SPECIFICATIONS CONT’D
VDSL INTERFACE
24-Port VDSL2 via 1-RJ-21 (TELCO-50) connector
24-Port POTS Telephone via 1-RJ-21 (TELCO-50) connector
1000MBPS COPPER PORTS
Two 10/100/1000Mbps RJ-45 Auto- negotiation, Auto MDI/MDI-X
SFP/MINI-GBIC SLOTS
Two 1000Base-SX/LX/BX, shared with Port-25 & Port-26
CONSOLE - One RS232 Serial Port (DB9, 57600, N, 8, 1)
SURGE PROTECTION – 3KV
SWITCH ARCHITECTURE – Store –and-Forward
SWITCH FABRIC – 8.8Gbps / non-blocking
SWITCH THROUGHPUT – 6.547Mbps @ 64Bytes
ADRESS TABLE – 8K Entries
SHARED DATA BUFFER – 512Kbps
MAXIMUM FRAME SIZE – 9K Bytes
FLOW CONTROL
Back pressure for Half – Duplex
IEEE 802.3x Pause Frame for Full – Duplex
GIGABIT PORT CONFIGUATION
Port disable / enable
Auto-negotiation
10/100/1000Mbps Full & Half Duplex mode selection
Flow Control disable / enable
PORT MIRRORING – TX / RX / Both, 1 to 1 Monitor
BANDWIDTH CONTROL
Ingress / Egress rate limit control
Gigabit Port – Allow to configure per 128Kbps
VDSL2 Port – Allow to configure per 5Mbps
VLAN
IEEE 802.1Q Tag-based VLAN, up to 256 VLANs groups, out of 4041
VLAN IDs
Port-based VLAN
GVRP, up to 128 dynamic VLAN groups
Q-in-Q tunneling
Private VLAN Edge (PVE / Protected port) with two protected port groups
ACCESS CONTROL LIST
IP-Based Layer 3 / Layer 4 ACL
Up to 220 ACL rule entries
LED
System: Power, SYS Status
Alert: Fan 1, Fan 2, Power 1, Power 2
VDSL: VDSL Link/Sync
SECURITY
Port Security (Disable Per Port of MAC Address Learning)
Status MAC, MAC filter, IPMAC Binding
RESET BUTTON
< 5sec: System Reboot
>10sec: Factory Default
DIMENSION (W x D x H) – 440 x 200 x 44mm, 2U height
WEIGHT – 6.4kg
POWER REQUIREMENT – 100-240vac, 50-60Hz
POWER CONSUMPTION – 130Watts maximum
DISSIPATION - 404 BTU/hr maximum
OTHER - Reset Button for system reset & Reset to factory default
VDSL2 STANDARD
Comply with ITU-T G.993.1 & G.993.2
Supports provisioning the VDSL optional band (25K to 138K Hz) usage
BAND PLAN
Selectable band plan for each VDSL line on a per port basis
Band Plan A: Profile 998, Annex A of G.993.1; Optimized for Symmetrical Services
PROFILE
Selectable spectrum profile of 8a/b/c/d, 12a/b, 17a, & 30a for frequency
bands (Annex A, B, & C) defined in G.993.2
GIGABIT PORT STATUS
Display port’s speed duplex mode, Link & Flow Control Status
Auto-negotiation status & trunk status
ENCODING – VDSL-DMT
VDSL2 FEATURES
Selectable Rate Limit Control
Selectable Target SNR (Signal to Noise Ratio) mode
POTS voices pass through
SNMP MIBS
RFC-1213 MIB-II
RFC-2863 Interface MIB
RFC-2665 Ether-Like MIB
RFC-1493 Bridge MIB
RFC-2819 RMON MIB (Group 1, 2, 3, & 9)
RFC-2737 Entity MIB
REGULATION COMPLIANCE
FCC Part 15 Class A, CE
IEEE 802.3
10Base-T
IEEE 802.3u
100Base-TX
IEEE 802.3z
1000Base-SX/LX
IEEE 802.3ab
1000Base-T
IEEE 802.3x
Flow Control & Back Pressure
IEEE 802.3ad
Port trunk with LACP
IEEE 802.1D
Spanning Tree Protocol
IEEE 802.1w
Rapid Spanning Tree Protocol
IEEE 802.1p
Class of Service
IEEE 802.1Q
VLAN Tagging
STANDARDS COMPLIANCE
IEEE 802.1x
Port Authentication Network Control
ITU-T
G.993.1 (VDSL)
G.997.1
G993.2 VDSL2 (Profile 30a Support), Annex A
RFC-768
UDP
RFC-793
TFTP
RFC-791
IP
RFC-792
ICMP
RFC-2068
HTTP
RFC-1112
IGMP VERSION 1
RFC-2236
IGMP VERSION 2
MANAGEMENT INTERFACE
Console, Telnet, Web Browser, SSL, SNMPv1 / v2c / v3
37
DATA CONNECT ENTERPRISE
PHONE: 301.924.7400 EXT 17
3405 OLANDWOOD CT
FAX: 301.924.7403
OLNEY, MD 20832
USA
www.data-connect.com
INDUSTRIAL SOLUTIONS
NETWORK ANYWHERE
VDSL2 & ADSL2/2+ SOLUTIONS
1-PORT ADSL2+ MODEM ROUTER
38
SPECIFICATIONS
DCE 5201A-BM
DCE5201A-BM single port Ethernet ADSL2/2+ Bridge Modem connects
an “Always-On” high speed Asymmetric Digital Subscriber Line (ADSL)
connection, to one 10/100Base-T Ethernet port connection for a PC or
other Ethernet device to enable internet connectivity.
It is fully compliant with ADSL, ADSl2, ADSL2+, Annex M, and READSL2/2+ specifications. This rate-adaptive solution is especially designed for enterprise telecommuters, home, or SOHO users supporting
ADSL2/2+ downstream and upstream data rates up to 24Mbps and
2.5Mbps
FEATURES











Default/Pre-configured in RFC1483 Bridge Mode
Compliant to the most updated ADSL2/2+ standards
Support ADSL2+ downstream data rate of up to 24Mbps
ATM Layer with Traffic Shaping QoS support
Built-in Quick Setup Wizard to easily establish ADSL connection
Embedded Firewall (SPI) feature for secure data communication
Support up to 8 PVCs
Support IP/Bridge Filtering functionality
RFC 1483 Bridge/Routing over ATM over ADSL
PPPoE and PPPoA Routing ATM over ADSL
Hardware Reset button for fast default setting recovery
ADSL
ANSI T1.413 i2, G.992.1 and G.992.2 ADSL standard compliant
G.992.3 and G.992.5 ADSL and ADSl2+ standard compliant
Downstream/Upstream data rate up to 24Mbps / 2.5Mbps with Annex M.
ATM
Support up to 8 distinct PVCs
Support VC and LLC Multiplexing
Support UBR, CBR, VBR-rt and VBR-nrt Traffic Shaping QoS
Support Hardware ATM AAL0 and AAL5 adaptation functionality
Support F4/F5 OAM cells
BRIDGING / ROUTING
RFC2684 (RFC1483) – Bridged/Routed
RFC2364 – PPPoA
RFC2516 – PPPoE
Support IEEE 802. 1d Transparent Bridging
NAT with extensive ALGs support
Dynamic and Static Routing
Support RIP v1 and v2
Support DHCP Server/Client/Relay
Support DNS Proxy
Support IGMP Proxy
Support Port Mapping/Forwarding
Support Port Triggering
Support 1483MER, IP over Ethernet over ATM
SECURITY
Support IP Filtering
Support Port Filtering
Support DMZ
Support MAC/Bridge Filtering
Support URL Blocking
Embedded firewall functionality
NETWORK MANAGEMENT
Support IP QoS
Web-based Control/Management
Remote Access Control
Remote Telnet
SNMP v@ (Support TRAP)
ATM PVC Remote Management
Firmware upgrade via HTTP/TFTP/FTP
Built-in diagnostic function
System Log
TR-69 support with 2M16M
APPLICATION
PHYSICAL
Dimension: 4.125 Inches (L) X 3.5 Inches (W) X 1 Inch (H)
HARDWARE INTERFACE
One RJ-11 ADS2/2+L connector
One RJ-45 LAN Connector
One Reset Button for Factory default setting recovery
One Power adaptor connector
4 Status LED Indicators
ENVIRONMENTAL
Temperature: +0 ~ +60 °C
Humidity: 10% ~ 90% RH
ORDERING INFORMATION
DCE 5201A-BM
I-PORT ADSL2+ BRIDGE MODEM
APPROVALS
FCC, CE Mark, EN60950 (LVD)
RoHS/WEEE compliance
38
DATA CONNECT ENTERPRISE
PHONE: 301.924.7400 EXT 17
3405 OLANDWOOD CT
FAX: 301.924.7403
OLNEY, MD 20832
USA
www.data-connect.com
INDUSTRIAL SOLUTIONS
NETWORK ANYWHERE
VDSL2 & ADSL2/2+ SOLUTIONS
1-PORT ADSL2+ MODEM ROUTER
39
SPECIFICATIONS
DCE 5201A-MR
DCE5201A-BM single port Ethernet ADSL2/2+ Modem Router connects
an “Always-On” high speed Asymmetric Digital Subscriber Line (ADSL)
connection, to one 10/100Base-T Ethernet port connection for a PC or
other Ethernet device to enable internet connectivity.
It is fully compliant with ADSL, ADSl2, ADSL2+, Annex M, and READSL2/2+ specifications. This rate-adaptive solution is especially designed for enterprise telecommuters, home, or SOHO users supporting
ADSL2/2+ downstream and upstream data rates up to 24Mbps and
2.5Mbps
FEATURES











Default/Pre-configured in RFC1483 Bridge Mode
Compliant to the most updated ADSL2/2+ standards
Support ADSL2+ downstream data rate of up to 24Mbps
ATM Layer with Traffic Shaping QoS support
Built-in Quick Setup Wizard to easily establish ADSL connection
Embedded Firewall (SPI) feature for secure data communication
Support up to 8 PVCs
Support IP/Bridge Filtering functionality
RFC 1483 Bridge/Routing over ATM over ADSL
PPPoE and PPPoA Routing ATM over ADSL
Hardware Reset button for fast default setting recovery
APPLICATION
ADSL
ANSI T1.413 i2, G.992.1 and G.992.2 ADSL standard compliant
G.992.3 and G.992.5 ADSL and ADSl2+ standard compliant
Downstream/Upstream data rate up to 24Mbps / 2.5Mbps with Annex M.
ATM
Support up to 8 distinct PVCs
Support VC and LLC Multiplexing
Support UBR, CBR, VBR-rt and VBR-nrt Traffic Shaping QoS
Support Hardware ATM AAL0 and AAL5 adaptation functionality
Support F4/F5 OAM cells
BRIDGING / ROUTING
RFC2684 (RFC1483) – Bridged/Routed
RFC2364 – PPPoA
RFC2516 – PPPoE
Support IEEE 802. 1d Transparent Bridging
NAT with extensive ALGs support
Dynamic and Static Routing
Support RIP v1 and v2
Support DHCP Server/Client/Relay
Support DNS Proxy
Support IGMP Proxy
Support Port Mapping/Forwarding
Support Port Triggering
Support 1483MER, IP over Ethernet over ATM
SECURITY
Support IP Filtering
Support Port Filtering
Support DMZ
Support MAC/Bridge Filtering
Support URL Blocking
Embedded firewall functionality
NETWORK MANAGEMENT
Support IP QoS
Web-based Control/Management
Remote Access Control
Remote Telnet
SNMP v@ (Support TRAP)
ATM PVC Remote Management
Firmware upgrade via HTTP/TFTP/FTP
Built-in diagnostic function
System Log
TR-69 support with 2M16M
PHYSICAL
Dimension: 4.125 Inches (L) X 3.5 Inches (W) X 1 Inch (H)
HARDWARE INTERFACE
One RJ-11 ADS2/2+L connector
One RJ-45 LAN Connector
One Reset Button for Factory default setting recovery
One Power adaptor connector
4 Status LED Indicators
ENVIRONMENTAL
Temperature: +0 ~ +60 °C
Humidity: 10% ~ 90% RH
ORDERING INFORMATION
DCE 5201A-MR
I-PORT ADSL2+ MODEM ROUTER
APPROVALS
FCC, CE Mark, EN60950 (LVD)
RoHS/WEEE compliance
39
DATA CONNECT ENTERPRISE
PHONE: 301.924.7400 EXT 17
3405 OLANDWOOD CT
FAX: 301.924.7403
OLNEY, MD 20832
USA
www.data-connect.com
INDUSTRIAL SOLUTIONS
NETWORK ANYWHERE
VDSL2 & ADSL2/2+ SOLUTIONS
4-PORT ADSL2+ VIRELESS G ROUTER
40
DCE 5204A-GRD
Data Connect DCE 5204A-GRD is an economical four port ADSL2+
Firewall Router Device with 802.11g Wireless AP ideally designed for
home and SOHO users to enjoy rich firewall security, mobility, and faster
speed when using ADSL Internet connection. With integrated Wireless
802.11g AP, the router enables you to surf the Internet anywhere in your
home. The router lets you share high-speed ADSL Internet connection,
ever faster with advanced ADSL2+ capability of downstream rate up to 24
Mbps. The powerful SOHO Firewall feature protects against hackers’ attacks when you surf the Internet. VPN pass-through is also built-in for
secure access. In addition, the web-based Graphic User Interface allows
you to install and manage your network easily. The DCE 5204A-GRD
makes fast wireless net surfing affordable and easy – Going online is just
‘plug & play’.
This router complies with the worldwide ADSL standards. It supports
downstream rates of up to 12/24 Mbps with ADSL2/2+, 8 Mbps with ADSL,
and upstream rates of up to 1 Mbps. With this technology, users enjoy not
only high-speed ADSL service but also broadband multimedia applications such as interactive gaming, video, video streaming and real-time
audio much more quickly and easily than ever. In particular, by doubling
the upstream data rate, the Annex M standard included in the DCE 5204AGRD model supports the latest ADSL2/2+ for higher uploaded speeds.
With an integrated 802.11g Wireless Access Point, the router offers
quick and easy access and mobility to the users of wired networks, wireless networks, and broadband connections (ADSL). In addition to supporting the 54Mbps 802.11g data rate, it is also backward compatible with
existing 802.11b equipment. The Wireless Protected Access (WPA-PSK/
WPA2-PSK) and Wireless Encryption Protocol (WEP) features enhance
the level of data protection and access control via a Wireless LAN. The
router further supports the WI-FI Protected Setup (WPS) standard, allowing users to establish a secure wireless network by simply pushing a
button.
Along with the built-in NAT natural firewall feature, the router’s advanced anti-hacker pattern-filtering protection feature automatically detects and blocks Denial of Service (DoS) attacks. In addition to the NAT
technology, the DCE 5204A-GRD supports Packet Filtering for high-level
security control.
Triple play functionality is provided by the ability to configure both
802.1Q port bases VLANS and LANE (LAN Emulation) assuring that packets get routed to the correct port in a timely manner.
The Web-based User Interface makes the DCE 5204A-GRD extremely
easy for users to install and manage the network. The router supports
DHCP client and server, enabling system administrators to easily fit this
security router into existing network environment and manage the IP assignment without re-configuring other stations. Furthermore, future firmware upgrade can be downloaded via the user-friendly Web-based Interface.
FEATURES











ORDERING INFORMATION
DCE/5204A-GRD
4-PORT ADSL2+ WIRELESS G
ROUTER DEVICE
SPECIFICATIONS
ATM & PPP PROTOCOLS ATM adaptation layer type 5 (AAL5)
Multiple Protocol over AAL5 (RFC 2684, formerly RFC 1483)
Bridged or routed Ethernet encapsulation
VC and LLC based multiplexer
PPP over Ethernet (PPPoE) (RFC 2516)
PPP over ATM (RFC 2364)
OAM F4/F5 Loop back
ATM QoS: UBR, CBR, VBR-rt, VBR-rnt
MANAGEMENT
Web-based configuration
Firmware upgrade and configuration data upload and download
via HTTP/FTP
SNMP V2 MIB supported
Supports DHCP server/client/relay
Supports SNMP, ICMP
Supports TR-069 client (CWMP
PHYSICAL INTERFACE
LINE: ADSL port
LAN: 4port 10/100M auto-crossover (MDI/MDI-X) switch
Factory default reset button
Power Jack
PHYSICAL SPECIFICATIONS
Dimensions: 5.20” x 3.70” x 1.38”
(132mm x 94mm x 35mm)
POWER REQUIREMENTS
802.11g Wireless Access Point with WPA-PSK/WPA2-PSK support
High speed Internet access with ADSL2/2+; backward compatible
with ADSL
Integrated with 4-port Ethernet Switch
SOHO Firewall Security with DoS Prevention and Packet Filtering
Universal Plug and Play (UPnP) Compliant
Dynamic Domain Name System (DDNS)
Supports Virtual Private Network (VPN) pass-through
(DCE 5204S-GRD) Input: 12VDC, 1A
Power Range: 180~230VAC/50Hz
MODELS & STANDARDS SUPPORT
DCE 5204S-GRD (A): Annex A & Annex M
DCE 5204A-GRD (U): Annex B & U-R2
Annex A and Annex M: ADSL over POTS
Annex B and ANNEX U-R2: ADSL over ISDN
Easy Network Management
Ideal for Home and SOHO Users
Supports TR-069*2
802.1Q VLAN tagging and LANE (LAN Emulation)
SPECIFICATIONS (CONT’D) NEXT PAGE————->
APPLICATION NEXT PAGE———————————>
40
DATA CONNECT ENTERPRISE
PHONE: 301.924.7400 EXT 17
3405 OLANDWOOD CT
FAX: 301.924.7403
OLNEY, MD 20832
USA
www.data-connect.com
INDUSTRIAL SOLUTIONS
NETWORK ANYWHERE
VDSL2 & ADSL2/2+ SOLUTIONS
4-PORT ADSL2+ VIRELESS G ROUTER
41
SPECIFICATIONS (CONT’D)
ADSL COMPLIANCE
FIREWALL & VIRTUAL PRIVATE NETWORK
Compliant with ADSL Standard
Full-rate ANSI T1.413 Issue 2
G.dmt (ITU G.992.1)
G.lite (ITU G.992.2)
G.hs (ITU G.994.1)
ADSL over ISDN/U-R2
Compliant with ADSL Standard
G.dmt.bisplus (ITU G 992.3)
G.lite.bixx (ITU G992.4)
ADSL2 Annex M (ITU G.992.3 Annex M)
Compliant with ADSL+ Standards
G.dmt.bisplus (ITU G.992.5)
Downstream: 24Mbps Upstream: 1Mbps
Built-in NAT firewall
Prevent Dos attacks including Land Attacks, Ping of Death,
etc.
Anti probe function
Packet IP, MAC, Web filter
Password protection for system management
VPN pass-through
ENVIRONMENTAL
Operation temperature: 0 ~40˚C
Storage temperatures -20 ~ 70˚C
Humidity: 20 ~95% non-condensing
NETWORK PROTOCOLS & FEATURES
Supports 8PVCs
IGMP Snooping, IGMP Multicast
NAT, static routing and RIP-1/2
NAT supports PAT and multimedia application
Multi-to-multi NAT
Transparent Bridging
Dynamic Domain Name System (DDNS)
802.1Q VLAN Tagging and LANE support
SNTP
DNS relay
Supports PAP, CHAP, MS-CHAP PPP
IPoA Routing ATM over ADSL (RFC2225/1577)
Supports IGMP v1/v2/v3
Support IEE 802.1D
Supports Web, FTP, TFTP, Telnet, Ping, and E-mail
APPLICATION
41
DATA CONNECT ENTERPRISE
PHONE: 301.924.7400 EXT 17
3405 OLANDWOOD CT
FAX: 301.924.7403
OLNEY, MD 20832
USA
www.data-connect.com
INDUSTRIAL SOLUTIONS
NETWORK ANYWHERE
VDSL2 & ADSL2/2+ SOLUTIONS
48-PORT ADSL2+ VIRELESS G DSLAM
42
DCE 5248A-DSG
The DCE 5248A-DSG is a 48-Port ADSL/ADSL2/ADSL2+ IP DSLAM with
one 1000Base-Tor 1000Base-LX uplink interfaces. The DCE 5248A-DSG
offers scalable and easy deployment for the network with an ADSL
environment. With the built-in POTS splitter subscriber ports, the DCE
5224-DSG performs a cost-effective solution for network service providers who can offer multiple subscribers excellent services.
The DCE 5248A-DSG supports local and remote managed capabilities of CLI, SNMP, Telnet via RS-232 CID, and Ethernet management
ports. Via the user-friendly Web GUI, the DCE 5248A-DSG can be managed by workstations running standard web browsers that provide the
easy-to-use operation and convenient maintenance.
To enhance the network security, the DCE 5248A-DSG also provides
features such as QOS, VLAN, Multicast, Bandwidth Management, Traffic Prioritization, and Data Flow Security Control. With the advance
QoS features, the DCE 5248A-DSG is an ideal solution for the Network
Service Providers to deliver rich triple play (data, voice, and video) to
their subscribers.
FEATURES













48-Port ADSL/ADSL2/ADSL2+ subscriber interface with
built-in POTS splitter
DMT data rate: Downstream up to 25Mbps / Upstream up
to 3 Mbps
1000Base-T or 1000Base-LX uplink interface
Stackable support
Web GUI based management based on Microsoft Windows
Local RS-232 CLI & Ethernet SNMP / Telnet management
Firmware upgradeable via FTP
Configuration backup & restoration via TFTP
Supports 6K MAC address &256 Multicast MAC Address
Support
Supports Static VLAN & Port Based on VLAN
VLAN / MAC / IP Filtering
Access Control List by MAC / IP Address
Traffic prioritization (802/1p)
ORDERING INFORMATION
DCE 5248A-DSG
48-PORT ADSL2+ D-SLAM WIRELESS G
SPECIFICATIONS
PORTS-UPLINK 1
1 x RJ-45 (10/100/1000Base-T)
PORTS-UPLINK 2
1 x RJ-45 (10/100/1000Base-T)
PORTS-MGNT
1 x RJ-45 (10/100/1000Base-T)
PORTS-CONSOLE
1 x RS-232
LED INDICATORS
1 x Power LED
1 x MAINT LED
1 x Alarm LED
1 x Master LED
48 x ADSL LEDs
2 x 1000 / Act LEDs
3 x 100 / Act LEDs
STANDARD SOFTWARE
Compliant with ADSL standard
-ANSI T1.413 issue 2
-G.dmt (ITU G.992.1)
-G.lite (ITU G.992.2)
-G.hs (ITU G.994.1)
Capable of ADSL2 standard
-G.dmt.bis (ITU G.992.3)
-Capable of ADSL2+ standard
-G.dmt.bisplus (ITU G.992.5)
PROTOCOL
STP
IGMP snooping
GMRP
GVRP
LACP
SNMP/ UDP / IP / MAC / Ethernet
MULICAST
SYSTEM
Subscriber interface with built-in POTS splitter
Downstream DMT data rate 32 kbps up to 25 Mbps
Upstream DMT data rate 32 kbps up to 1 Mbps
Extended power managed capabilities to optimize power consumption
for each application
Distance up to 18kft
1000Base-T / 1000Base-LX uplink interface via model
Stackable support
Centronic 50 pin connector fro Telco line in and out
8 VCs per x DSL port
128 MAC address per x DSL port
6k MAC address Ethernet Bridging: Broadcast, Flooding/Dropping
VLAN Bridging: 512 VLAN, Static VLAN, VLAN Stacking / Trucking
Packet size 64 byte to 1522byte
PPPoE Intermediate Agent
DHCP Relay Agent
IPOA to IPOE Tunneling
PPPoA to PPPoE inter-working
Input Rate Limiting (IRL) on a per-AAL5 interface
Output Rate Limiting (ORL) on per ATM-port and Ethernet basis
Rate Limiting
Multiple mechanisms of prioritizing traffic
SECUIRTY
VLAN filtering
MAC filtering
IP filtering
Access control list by MAC address
Access control list by IP address
Throttling Control
Sticky Bridge Ports
PORTS-LINE
2 x Telco-50
PORTS-PHONE
2 x Telco-50
SPECIFICATIONS (CONT’D) NEXT PAGE ————>
APPLICATION NEXT PAGE——————————–>
42
DATA CONNECT ENTERPRISE
PHONE: 301.924.7400 EXT 17
3405 OLANDWOOD CT
FAX: 301.924.7403
OLNEY, MD 20832
USA
www.data-connect.com
INDUSTRIAL SOLUTIONS
NETWORK ANYWHERE
VDSL2 & ADSL2/2+ SOLUTIONS
48-PORT ADSL2+ VIRELESS G DSLAM
43
SPECIFICATIONS (CONT’D)
SECUIRTY
VLAN filtering
MAC filtering
IP filtering
Access control list by MAC address
Access control list by IP address
Throttling Control
Sticky Bridge Ports
POWER REQUIREMENTS
90~240VAC, 2.5A, 50~60Hz
DIMENSIONS (W x D x H)
440 x 400 x 44mm
ENVRONMENTAL
Temperature: 0~50 ˚C
Humidity: 5~90% (non-condensing)
MANAGEMENT
GUI management based on Microsoft Windows
Local RS-232 CLI, and Ethernet SNMP / Telnet management
Remote in-band SNMP / Telnet management
Upgradable firmware via FTP or TFTP
SNMP v1, v2c
EMISSION
CE, FCC
APPLICATION
43
DATA CONNECT ENTERPRISE
PHONE: 301.924.7400 EXT 17
3405 OLANDWOOD CT
FAX: 301.924.7403
OLNEY, MD 20832
USA
www.data-connect.com
INDUSTRIAL SOLUTIONS
NETWORK ANYWHERE
VDSL2 & ADSL2/2+ SOLUTIONS
24-PORT ADSL2+ VIRELESS G DSLAM
44
DCE 5224A-DSG
The DCE 5224A-DSG is a 24-Port ADSL2/ADSL2+ mini IP DSLAM with one
1000Base-T uplink interface. The DCE 5224A-DSG offers scalable and
easy deployment for the network with a small ADSL environment. With
the built-in POTS splitter subscriber ports, the DCE 5224-DSG performs a
cost-effective solution for network service providers who can offer multiple subscribers excellent services.
The DCE 5224A-DSG supports local and remote managed capabilities
of CLI, SNMP, Telnet via RS-232 Console Port, and Web GUI management
interface. Via the user-friendly Web GUI, the DCE 5224A-DSG can be
managed by workstations running standard web browsers that provide
the easy-to-use operation and convenient maintenance.
LED INDICATORS
One SYS
One ALM
One Uplink
24 ADSL
COMPLIANT WITH ADSL STANDARD
ANSI t1.413 issue 2
G.dmt (ITU G.992.1)
G.lite (ITU G.992.2)
G.hs (ITU G.994.1)
COMPLIANT WITH ADSL2 STANDARD
G.dmt.bis (ITU G.992.3)
To enhance the network security, the DCE 5224A-DSG also provides
features such as QOS, VLAN, Multicast, Bandwidth Management, Traffic
Prioritization, and Access Control List. With the advance QoS features,
the DCE 5224A-DSG is an ideal solution for the next generation broadband network to deliver rich video contents, DSL, POTS, and VoIP service
over ADSL2+ connection.
FEATURES










24-Port ADSL/ADSL2/ADSL2+ subscriber interface with
built-in POTS splitter
DMT data rate: Downstream up to 25Mbps / Upstream up
to 3 Mbps
1000Base-T uplink interface
Web GUI based management
Local RS-232 CLI & Ethernet SNMP / Telnet / SSH management
Firmware upgradeable via FTP
Configuration backup & restoration via TFTP
Supports 4K MAC address
Supports IEEE 802.1q Tag-based VLAN & Protocol-based
VLAN
Layer 2 / 3 filtering based on MAC, IP, Protocol, Port
ORDERING INFORMATION
DCE 5224A-DSG
24-PORT ADSL2+ DSLAM WIRELESS G
SPECIFICATIONS
CASE
1.5U high box-type with a rack-mountable enclosure
PORTS
Uplink - One RJ-45 (10/100/1000Base-T)
Console – One RS-232 Serial Port (9600, 8, N, 1)
Line – One RJ-21 Connector
Phone – One RJ-21 Connector
44
DATA CONNECT ENTERPRISE
PHONE: 301.924.7400 EXT 17
COMPLIANT WITH ADSL2 STANDARD
G.dmt.bisplus (ITU G.992.5)
SYSTEM
Subscriber interface with built-in POTS splitter
Downstream DMT data rate up to 25Mbps
Upstream DMT data rate up to 3Mbps (Annex M)
Distance up to 18,000ft
8 PVCs per xDSL port
DHCP forward
DHCP relay agent
PPPoE relay
IPSec/L2TP/PPTP VPN pass-through function
PPPoA to PPPoE inter-working
BRIDGE FUNCTION
Supports IPv4 packet
Supports IEEE802.1d Ethernet bridge function between trunk Ether
port & ATM VCs
Supports static source MAC table provisioning, automatic source
MAC learning, & block duplicate ones
Supports 4K static MAC address table
128 MAC address per xDSL port
VLAN FUNCTION
IEEE 802.1q Port-based / Protocol-based VLAN
512 non-stacked VLAN VLAN-ID simultaneously ranging from 1 to
4095
VLAN stacking & VLAN cross-connect
IP Spoofing prevention
MAC anti-Spoofing
Port isolation functionality
Static VLAN group & membership provisioning
MULTICAST FUNCTION
IP multicasting forwarding
Complies with RFC2684 bridged payload encapsulation mode
Up to 256 multicast groups & 512 copies simultaneously
Up to 48 profile-based Multicast Access Control
Limit maximum number of IGMP groups joined per bridge port
IGMP snooping / proxy per IGMP v1, v2, & v3
IGMP proxy & IGMP snooping Selection
SECURITY
Supports Layer-2 frame filtering based on MAC & Ether Type
Supports Layer-3 filtering based on IP, Protocol, & Port number
SPECIFICATIONS (CONT’D) NEXT PAGE ——————>
APPLICATION NEXT PAGE—————————————>
3405 OLANDWOOD CT
FAX: 301.924.7403
OLNEY, MD 20832
USA
www.data-connect.com
INDUSTRIAL SOLUTIONS
NETWORK ANYWHERE
VDSL2 & ADSL2/2+ SOLUTIONS
24-PORT ADSL2+ VIRELESS G DSLAM
45
SPECIFICATIONS (CONT’D)
QOS
Control the bandwidth , occupied by broadcast, multicast, & unknown unicast
(flooding)
Rate-limit profile binding per bridge port
Three Color Marking (TCM) policer
Ethernet Rate limit per bridge port
ToS (type of service) / DiffServ (differentiated services) stripping & priority Queuing
DSCP mapping to 802.1p
Selectable adopted priority Queue mechanisms according to Strict Priority
Queue (SPQ) & Weighted Fair Queue (WFQ)
Configurable mapping function between ATM, PVC, & 802.1p priority queue
Supports IP CoS technology
MANAGEMENT
Web based GUI management
Local RS-232 CLI, & Ethernet SNMP / Telnet / SSH management
Remote in-band SNMP / Telnet / SSH management
Firmware upgradeable via FTP
SNMP v1, v2c
POWER REQUIREMENT
90-240VAC, 2.5A, 50-60Hz
DIMENSION (W x D x H)
440 x 400 x 33mm
ENVIRONMENTAL
Temperature - 0-50ºC
Humidity – 5-90% (non-condensing)
APPLICATION
45
DATA CONNECT ENTERPRISE
PHONE: 301.924.7400 EXT 17
3405 OLANDWOOD CT
FAX: 301.924.7403
OLNEY, MD 20832
USA
www.data-connect.com
INDUSTRIAL SOLUTIONS
NETWORK ANYWHERE
VDSL2 & ADSL2/2+ SOLUTIONS
DSL FILTER
46
DCE DSL FILTER
Not all DSL filters are created equal. Be careful of cheap imitations that don’t follow along with regulated standards or meet
proper telephone impendence requirements. The Data Connect
DSL FILTER can eliminate the harmonic noise on the voice signal
transmitted in the telephone line. The DCE DSL-FILTER allows
the analog telephone to operate over DSL circuit. The analog
telephone signal is converted to DSL. The DCE DSL-FILTER
cable plugs into the Telephone Wall Jack and the phone plugs into
the other side.
APPLICATION
SPECIFICATIONS
25KHz to 2208KHz
Zr=600Ω
100Ω
insertion loss
@ 1004Hz
<0.3dB
With 5 filters
200 to 3.4kHz
3.4kHz to 4 kHz
200Hz<f<3.4 kHz
3.4kHz to 4 kHz
<2.5dB
<4dB
<0.3dB
<0.75dB
SRL-L
ERL
SRLH
SRL-L
ERL
SRLH
>=30dB
>=17dB
>=20dB
>=25dB
>=15dB
>=7.0dB
Attenuation distortion between
600 ohms resistive single filter
(relative to 1004Hz)
ODERING INFORMATION
DCE/DSL-FILTER
DCE/DSL-FILTER-25PK
DCE/DSL-FILTER-50
DCE/DSL-FILTER-100
DCE/DSL-FILTER-250
DCE/DSL-FILTER-500
DCE/DSL-FILTER-1000
POST PORT IMPEDANCE
Modem impedance
DSL FILTER
DSL FILTER 25-PACK
DSL FILTER 50-PACK
DSL FILTER 100-PACK
DSL FILTER 250-PACK
DSL FILTER 500-PACK
DSL FILTER 1000-PACK
Return Loss (LINE to PHONE)
Return loss (phone to line)
Longitudinal convention loss
LCL 200 Hz TO 1 kHz >58Db
1kHz to 3kHz
>53Db
DC resistance
<12Ω
delay distortion
isolation resistance
200Hz to 4k
tip to ring
<100u/sec
>10MΩ
stop band attenuation
30kHz<f<300kHz
>26 Db
300kHz<f<2208KHz
>65Db
46
DATA CONNECT ENTERPRISE
PHONE: 301.924.7400 EXT 17
3405 OLANDWOOD CT
FAX: 301.924.7403
OLNEY, MD 20832
USA
www.data-connect.com
INDUSTRIAL SOLUTIONS
NETWORK ANYWHERE
VDSL2 & ADSL2/2+ SOLUTIONS
DSL SPLITTER
47
DCE DSL SPILTTER
Not as splitters are created equal. Be careful of cheap imitations that
don’t follow along with regulated standards or meet proper ADSL
impendence requirements. The Data Connect DSL- SPLITTER can
eliminate the interference between the data signal, and voice signal
transmitted in the telephone line. The DCE DSL- splitter allows the
internet and telephone to operate over simultaneously at the same
time. The data signal for the internet and the voice signal for telephone are separated and shielded from each other. The DCE DSL–
SPLITTER has one telephone RJ jack at one end of the DSL line two
RJ11 at the other end of the phone and modem.
APPLICATION
SPECIFICATIONS
POST PORT IMPEDANCE
Modem impedance
Insertion loss
with 5 filters
Attenuation distortion
between 600 ohms
resistive single filter
relative to 1004 Hz
Return loss
with 5 filters
Longitudinal conversion
loss LCL
ORDERING INFORMATION
DCE DSL-SPLITTER
DCE DSL-SPLITTER-25PK
DCE DSL-SPLITTER-50PK
DCE DSL-SPLITTER-100PK
DCE DSL-SPLITTER-250PK
DCE DSL-SPLITTER-500PK
DSL SPLITTER
DSL SPLITTER 25-PACK
DSL SPLITTER 50-PACK
DSL SPLITTER 100-PACK
DSL SPLITTER 250-PACK
DSL SPLITTER 500-PACK
DC resistance
Delay distortion
Isolation resistance
Stop band attention
25 kHz to 2208 kHz
@ 1004 Hz
Zr=600Ω
100Ω
<0.3dB
200Hz to 3.4 kHz
3.4 kHz to 4 kHz
200 Hz <f <3.4 kHz
<2.5dB
<4dB
0.3dB
3.4 kHz to 4 kHz
SRL-L
ERL
SRL-H
SRL-L
ERL
SRL-H
<0.75dB
>=30dB
>=17dB
>=20dB
>=25dB
>=15dB
>=7.0dB
200 Hz to 1 kHz
1kHz to 3 kHz
>58 dB
>53 dB
>12Ω
<100 u sec
>10MΩ
>26 dB
>65dB
200Hz to 4 kHz
Tip to Ring
30 kHz <f<300 kHz
300 kHz<f<2208 kHz
47
DATA CONNECT ENTERPRISE
PHONE: 301.924.7400 EXT 17
3405 OLANDWOOD CT
FAX: 301.924.7403
OLNEY, MD 20832
USA
www.data-connect.com
INDUSTRIAL SOLUTIONS
NETWORK ANYWHERE
POE & ATA SOLUTIONS
POE & ATA CHECKLIST
48
MODEL
VOLTAGE
MAX
SPEED
ETHER.
48V-POEI
48VDC
100MBITS
X
X
50
48V-POEI-GB
48VDC
1GIGABIT
X
X
51
DCE/48VATA1000
48VDC
100MBITS
X
X
52, 53
DCE/POEI12PH
48VDC
100MBITS
X
X
DCE/48V-POF
-GB
48VDC
1GIGABIT
X
DCE 60VPOE
UP TO
60VDC
PINS on
Switch
Pin 1
Pin 2
Pin 3
Pin 4
Pin 5
Pin 6
Pin 7
Pin 8
STAND RACK WALL
FIBER ALONE MOUNT MOUNT
X
PHOTO
X
PAGE 54
X
55
X
56, 57
802.3af Standards A and B
10/100
10/100 DC on
1000 (1 Gigabit)
Mixed DC &
Spares (mode
DC & Bi-Data
Data (mode
B)
(mode B)
A)
Rx +
Rx +
DC +
TxRx A +
Rx Rx DC +
TxRx A Tx +
Tx +
DC TxRx B +
DC +
unused
TxRx C +
DC +
DC +
unused
TxRx C DC +
Tx Tx DC TxRx B DC unused
TxRx D + DC DC unused
TxRx D DC -
1000 (1 Gigabit)
DC & Bi-Data
(mode A)
TxRx A +
DC +
TxRx A DC +
TxRx B +
DC TxRx C +
TxRx C TxRx B DC TxRx D +
TxRx D -
48
DATA CONNECT ENTERPRISE
PHONE: 301.924.7400 EXT 17
3405 OLANDWOOD CT
FAX: 301.924.7403
OLNEY, MD 20832
USA
www.data-connect.com
INDUSTRIAL SOLUTIONS
NETWORK ANYWHERE
49
POE & ATA SOLUTIONS
IN THIS SECTION & THE TECHNOLOGY
IN This Section
48V POEI 10/100Base-T
48V POEI 1GIGABIT
ANALOG — TELEPHONE — ADAPTER
48V POEI 10/100Base-T 12 Port Hub
48V POFI 1GIGABIT
60V POE SURGE PROTECTOR
Pg 50
Pg 51
Pg 52
Pg 53
Pg 54
Pg 55
The Technology
Power over Ethernet or PoE passes electrical power safely along with data on
Ethernet cabling. The original IEEE 802.3af PoE standard provides up to 15.4 Watts of
DC power (minimum 44VDC and 350mA) to each device. The updated IEEE 802.3at
PoE standard also known as PoE+ provides up to 25.5 Watts of DC power.
PoE requires Category 5 cable or higher for high power levels, but can operate with
Category 3 cable for low power levels. PoE utilizes (pins 4 & 5) or (pins 7 & 8) for DC
voltage. A Power over Ethernet injector injects DC Voltage to power equipment while
simultaneously supplying data to the same piece of equipment.
The Power over Ethernet technology is especially useful for powering IP telephones, wireless LAN access points, IP cameras with pan tilt and zoom (PTZ), remote
Ethernet switches, embedded computers, thin clients, and LCDs.
At Data Connect, we offer a wide range of products to suite your network needs.
We can assist you in finding a solution that maximizes your investment while providing
optional network design to benefit your customers both now and for years to come.
With the ability to reuse and preserve the current infrastructure at your customer’s locations, Power over Ethernet technology is a wise choice for providing IP services to
your customers.
49
DATA CONNECT ENTERPRISE
PHONE: 301.924.7400 EXT 17
3405 OLANDWOOD CT
FAX: 301.924.7403
OLNEY, MD 20832
USA
www.data-connect.com
INDUSTRIAL SOLUTIONS
NETWORK ANYWHERE
POE & ATA SOLUTIONS
48VDC 10/100 POE INJECTOR
50
DCE 48V-POEI
The Data Connect 48V-POEI is a 802.3af Power Over
Ethernet PoE Injector that works with any and all access
point that are also 802.3af PoE complaint. The 48V POEI is
self contained with both a power over Ethernet PoE injector adapter and a power supply all in one, this makes it
much easier to deal with when keeping a clean cable room.
The 48V-POEI also has 100/240VAC support and supplies
48VDC to all units.
The Data Connect 48V-POEI Power over Ethernet PoE
Injector Adapter puts power over pairs 4, 5, and 7, 8. This
unit can also be used with Cisco PoE equipment using an
altered Pin Out on the RJ-45 cable. The 48V-POEI also provides Auto-Recover, Over-Voltage and Short Circuit protec-
FEATURES
SPECIFICATIONS
19 watts
CISPR 22’B, VCC ’B’, FCC ’B’ compliances
Light Weight: 145g
Efficiency over 75%
Over-voltage protective installation
Short-circuit protective installation
Protection type: auto recover
802.3af standard
Operating temperature, 0ºC - 40ºC
DATA_IN & P+ DATA_OUT PIN DEFINITION
ORDERING INFORMATION
DCE/48V-POEI
48VDC POWER over ETHERNET
Output voltage
48v
Output rating
0.4 A
Input voltage
Input frequency
90 - 264 VAC
47 & 63 Hz
Input current
0.5 A maximum
Inrush current
40 A maximum
Line regulation
2% maximum
Load regulation
Ripple and noise
±5%
1% typical
Efficiency
83% typical
Temperature coefficient
0.05% / ºC
Over-voltage coefficient
96 V maximum
Operating temperature
0 – 40ºC
Storage temperature
Safety description
-20 - 85ºC
I/P
50
DATA CONNECT ENTERPRISE
PHONE: 301.924.7400 EXT 17
3405 OLANDWOOD CT
FAX: 301.924.7403
OLNEY, MD 20832
USA
www.data-connect.com
INDUSTRIAL SOLUTIONS
NETWORK ANYWHERE
POE & ATA SOLUTIONS
48VDC GIGABIT POE INJECTOR
51
DCE 48V-POEI-GB
The DCE 48V POEI – GB is an IEEE 802.3af
power over Ethernet Injector which provides DC 48V over
the Ethernet cables. The DCE 48V POEI – GB IEEE
802.3af power over Ethernet Injector inserts DC voltage
into Cat.5 cable, allowing the cable between the injector
(DCE 48V – POEI – GB) and splitter is 100 meters. The
DCE48V - POEI – GB combines the Ethernet digital data
with power over the twisted pair of cables as an IEEE
802.3af power over Ethernet Injector. The IEEE802.3af
power over Ethernet splitter separates the digital data and
the power into two outputs.
Unlike existing power over Ethernet Injectors, the
DCE 48V – POEI – GB also provides 1000 Mbps Gigabit
Ethernet connection ability, as well as the 10 / 100 Mbps
Fast Ethernet connection ability.
With IEEE.3af Power over Ethernet devices installed, the system administrator only has to use a single
RJ-45 Ethernet cable to carry both power and data to each
device. Additional benefits include cost saving, ease of networking planning and high network reliability. The DCE 48V
-POEI-GB makes network connection while migrating or
splitting the power and the Ethernet digital packets. This
allows the DCE 48V-POEI-GB to connect to any IEEE
802.3af compliant device AP or IP phone.
FEATURES
Compliant with IEEE 802.3-10BaseT, IEEE 802.3u, 100BaseTX,
IEEE 802.3ab – 1000BaseTX, and IEEE 802.3z, 1000BaseSX/
LX Gigabit Ethernet Standards
One 10/100/1000BaseTX TP Port and one 1000Base SX/LX
Ethernet Fiber Port providing one gigabit SFP open slot.
Compliant with IEEE-802.3af
Compliant with IEEE-802.3x flow control and back pressure
TP Port can support Half/Full-Duplex, Auto-MDI/MDI-X and Auto
-Negotiation
Diagnostic LED Indications, Link/Act: 1000M, POE and Power
Safety & EMI Certificates: CE & FCC
Smart plug & play
ORDERING INFORMATION
DCE/48V-POEI
48VDC GIGABIT POWER over ETHERNET
SPECIFICATIONS
STANDARDS
IEEE 802.3AB 1000BASE
IEEE 802.3Z 1000 BASESX/LX
IEEE 802.3X FLOW CONTROL
IEEE 802.3AF
FEATURES
NUMBER OF PORTS:
1 1000BaseT withRJ-45 Connector
1 1000BaseSX/LX with fiber SFP Slot
DATA TRANSFER RATE
2000Mbps/full duplex
TRANSMISSION MEDIA
TP: 1000Base T Cat. 5, 5E, 6 UTP/STP, up to 100
m
1000Base SX:
50/125µm Multi Mode Fiber optic cable, up to
220 m 62.5/125µm Multi Mode Fiber optic
cable up to 550 m
1000BaseLX:9/125µm Single Mode Fiber optic
cable
LED INDICATORS
Per port:
(TX): Link, TX
(FX): Link, RX
Per Unit: Power, Link/ACT, 1000M, PoE
POWER SUPPLY
18 watts
POWER CONSUMPTION
3 Watts (MAX)
51
DATA CONNECT ENTERPRISE
PHONE: 301.924.7400 EXT 17
3405 OLANDWOOD CT
FAX: 301.924.7403
OLNEY, MD 20832
USA
www.data-connect.com
INDUSTRIAL SOLUTIONS
NETWORK ANYWHERE
POE & ATA SOLUTIONS
ANALOG TELEPHONE ADAPTER
52
DCE ATA-1000
Based on the flexible VoIP technology platform,
the Data Connect DCE ATA-1000 Analog Telephone
Adapter products are standards-based SIP (RFC
3261) communication devices. The DCE ATA-1000 is
widely deployed by VoIP providers of the emerging
VoIP managed voice services. The DCE ATA-1000
also supports the most popular local services market
to ensure the compatibility and IP devices costeffectively.
The DCE ATA-1000 is easy to install and simple to
use and eliminates the time and effort associated
with complicated installation procedures. The DCE
ATA-1000 supports Web-based configuration, TFTP
Auto-Provisioning, and TFTP Auto-Firmware upgrade. The ATA-1000 offers an enhanced traditional
telephony communication services to home users via
the existing broadband connection in the Internet or
corporation network with very low cost.
With the DCE ATA-1000, SOHO users are able to
save the installation cost and extend their past investments of telephones, conference and speakerphones. The DCE ATA-1000 can be bridged between
traditional analog systems and the IP network with an
extremely affordable investment.
FEATURES
-Feature-rich telephone service over home Internet /
Intranet connection
-Cost-effective, easy-to-use solution for Analog Telephone Adapter
-Web-based utility and machine configuration
-Remote administrator authentication
-SIP 2.0 (RFC3261) compliant
- G.729a and G.711 voice codec
-Auto-provisioning
-STUN for NAT traversal
-DHCP / PPPoE / Fixed IP allocation
-SIP proxy / Peer-to-Peer communications
-VAD / CNG / Echo Cancellation / DTMF tone detection and regeneration
SPECIFICATIONS
LAN: One 10/100Mbps RJ-45 port
FXS: One RJ-11 connection
STANDARD:
SIP 2.0 (RFC3261), STUN (RFC 3498), UPnP, MDS
for SIP authentication (RFC 2069 / 2617)
VOICE CODEC: G.729a, & G.711
VOICE SANDARDS:
Voice activity detection (VAD)
Comfort noise generation (CNG)
G.168: Line Echo canceller (LEC)
Jitter Buffer
DTMF Detection & Generation
In-Band & Out-of-Band (RFC 2833), (SIP INFO)
PROTOCOLS:
TCP/IP, UDP, DHCP, RTP, HTTP, ICMP, ARP, DNS,
TFTP, PPP, PPPoE
ACCESS MODE: Static IP, DHCP, PPPoE
MANAGEMENT: Web, Utility, Auto-provisioning (TFIP)
DIMENSION (W x D x H): 73 x 55 x 24mm
OPERATING ENVIRONMENT: 0-40ºC
RELATIVE HUMIDITY: 10-95%
POWER REQUIREMENT: 5VDC
EMC / EMI: CE, FCC Class B
ORDERING INFORMATION
DCE/ATA-1000
Analog Telephone Adapter
APPLICATION NEXT PAGE ——-———>
52
DATA CONNECT ENTERPRISE
PHONE: 301.924.7400 EXT 17
3405 OLANDWOOD CT
FAX: 301.924.7403
OLNEY, MD 20832
USA
www.data-connect.com
INDUSTRIAL SOLUTIONS
NETWORK ANYWHERE
POE & ATA SOLUTIONS
48 VOLT POE 12-PORT HUB
53
DCE ATA-1000 APPLICATION
DEC 48POEI-12PH APPLICATION
53
DATA CONNECT ENTERPRISE
PHONE: 301.924.7400 EXT 17
3405 OLANDWOOD CT
FAX: 301.924.7403
OLNEY, MD 20832
USA
www.data-connect.com
INDUSTRIAL SOLUTIONS
NETWORK ANYWHERE
POE & ATA SOLUTIONS
48 VOLT POE 12-PORT HUB
54
The Data Connect DCE 48V POEI-12PH is 12-Port IEEE 802.3af
Power over Ethernet Web Management injector Hub and complies with
the IEEE 802.3, IEEE 802.3u and IEEE 802.3af standards. With 12
10/100Base-TX Fast Ethernet ports, DCE 48V POEI-12PH support full
48V DC power for any remote IEEE 802.3af powered device (PD) like
Wireless LAN Access Point, IP phone and IP Camera. Supporting PoE
power budget of 190 watts, DCE 48V POEI-12PH provides sufficient
15.4 watts PoE power to 12 remote PD devices.
The DCE 48V POEI-12PH is installed between a regular Ethernet
Switch and the powered devices, injecting power without affecting the
data transmission. They offer a cost effective and quick solution to
upgrade network system to IEEE 802.3af Power over Ethernet system
without replacing the existing Ethernet switch. There are 24 RJ-45 STP
ports on the front panel of PoE Injector Hub, in which the 12 ports on
the lower stack function as “Data Input” and the other 12 ports on the
upper stack function as “PoE (Data and Power) output”. Each of the
“PoE output” port on the upper stack operates as a power injector
which transmits DC Voltage to the CAT5 cable so as to transfer data
and power simultaneously between the Injector and Splitter.
To efficiently manage the powered devices, DCE 48V POEI-12PH
provide Web management interface in which administrators can use
the functions including port Enable/Disable, port priority, system configuration, and Username/Password changing and with smart features
for powered device. The PoE injector hub can auto-detect the power
status of each port and show massages on its Web management interface. These features also provide a cost-effective way to manage the
device via from Internet whenever you are at work or home.
KEY FEATURES
INTERFACE:
24-Port RJ-45 STP
12-Port “Data input”
12-Port “PoE (Data + Power) output”
1 10/100Base-TX Management port with Auto MDI / MDI-X feature
POE:
Complies with IEEE 802.3af Power over Ethernet Mid-Span PSE
Up to 12 IEEE 802.3af devices powered
Support PoE Power up t 15.4 watts for each PoE ports
Auto detect powered device (PD)
Circuit protection prevent power interference between ports
Remote power feeding up to 100m
POE MANAGEMENT:
Total PoE power budget control
Pert port PoE function enable/disable
PoE Port Power feeding priority
Per PoE port power limit
PD classification detection
MANAGEMENT:
Web interface for remote management
Firmware upgrade through Web interface
Smart Discovery utility automatically finds DCE devices n the network
SNMP Trap for alarm notification of events
HARDWARE:
19-inch rack mountable; 1U height
Reset button for reset to default setting and system reboot
LED indicators for PoE ready and PoE activity
STANDARD COMPLIANCE:
IEEE 802.3 10Base-T
IEEE 802.3u 100Base-TX
IEEE 802.af Power over Ethernet
FCC Part 15 Class A, CE
<———————————-PREVIOUS PAGE APPLICATION
DATA CONNECT ENTERPRISE
PHONE: 301.924.7400 EXT 17
SPECIFICATIONS
INTERFACE:
“Data” Input Ports: 12 x RJ-45 STP
“PoE (Data + Power)” Output Ports: 12 x RJ-45 STP
MANAGEMENT PORT: 1 x RJ-45; 0/100Base-TX, auto negotiation, autoMDI / MDIX
LED: System: Power x 1 (Green)
MANAGEMENT PORT 2X:
10/100 (Green/Orange)
Per PoE Port: PoE in Use x 1 (Green)
NETWORK CABLE:
10Base-T: 2-Pair UTP Cat 3, 4, 5, up to 100m (328ft)
100Base-TX: 2-Pair UTP Cat, 3, 4, 5, up to 100m (328ft)
EIA/TIA-568 100-ohm STP (100m)
DIMENSION (W x D x H): 440 x 200 x 44 mm (1U height)
WEIGHT: 7.2kg
POWER REQUIREMENT: 100-240V AC, 50/60 Hz
POWER CONSUMPTION: 200 watts max
OPERATING TEMPERATURE: 0 - 50ºC
STORAGE TEMPERATURE: -40 - 70ºC
HUMIDITY: 5 - 95% (Non-condensing)
COOLING: Fan x 1
POE STANDARD: IEEE 802.3af Power over Ethernet / Mid-Span PSE
POE POWER SUPPLY TYPE: Mid-Span
POE POWER OUTPUT: Per Port DC 48V 15.4 Watts
POWER PIN ASSIGNMENT: 4/5(+) 7/8(-)
POE POWER BUDGET: 190 Watts
POE MANAGEMENT:
Power Limit by Priority and Total Limit
Per port power enable/disable
Power feeding priority
Current usage and status
Total power consumption
MANAGEMENT FEATURE:
System/Management functions setup
Web firmware upgrade
SNMP Trap for alarm notification of events
STANDARDS COMPLIANE:
IEEE 802.3 10Base-T Ethernet
IEEE 802.3 100Base-TX Fast Ethernet
IEEE 802.3af Power over Ethernet
REGULATION COMPLIANCE: FCC Part 15 Class A, CE
ORDERING INFORMATION
DCE/48V-POEI-12PH
48V POE INJECTOR 12 PORT
54
3405 OLANDWOOD CT
FAX: 301.924.7403
OLNEY, MD 20832
USA
www.data-connect.com
INDUSTRIAL SOLUTIONS
NETWORK ANYWHERE
POE & ATA SOLUTIONS
48V GIGABIT POWER OVER FIBER
55
DCE 48V-POF-GB
The DCE 48V POFI – GB is an IEEE 802.3af
cables. The DCE 48V POFI – GB IEEE 802.3af power over Ethernet
Injector inserts DC voltage into Cat.5 cable, allowing the cable between the injector (DCE 48V – POFI – GB) and splitter is 100 meters.
The DCE48V - POFI – GB combines the Ethernet digital data with
power over the twisted pair of cables as an IEEE 802.3af power over
Ethernet Injector. The IEEE802.3af power over Ethernet splitter separates the digital data and the power into two outputs.
Unlike existing power over Ethernet Injectors, the DCE 48V
– POFI – GB also provides 1000 Mbps Gigabit Ethernet connection
ability, as well as the 10 / 100 Mbps Fast Ethernet connection ability.
With IEEE.3af Power over Ethernet devices installed, the
system administrator only has to use a single RJ-45 Ethernet cable
to carry both power and data to each device. Additional benefits include cost saving, ease of networking planning and high network
reliability. The DCE 48V-POFI-GB makes network connection while
migrating or splitting the power and the Ethernet digital packets. This
allows the DCE 48V-POFI-GB to connect to any IEEE 802.3af compliant device AP or IP phone.
FEATURES
Compliant with IEEE 802.3-10BaseT, IEEE 802.3u,
100BaseTX, IEEE 802.3ab – 1000BaseTX, and
IEEE 802.3z, 1000BaseSX/LX Gigabit Ethernet Standards
One 10/100/1000BaseTX TP Port and one 1000Base SX/
LX Ethernet Fiber Port providing one
gigabit SFP open slot.
Compliant with IEEE-802.3af
Compliant with IEEE-802.3x flow control and back pres
sure
TP Port can support Half/Full-Duplex, Auto-MDI/MDI-X
and Auto-Negotiation
Diagnostic LED Indications, Link/Act: 1000M, POE
Power Safety & EMI Certificates: CE & FCC
SPECIFICATIONS
STANDARDS
IEEE 802.3AB 1000BASE
IEEE 802.3Z 1000 BASESX/LX
IEEE 802.3X FLOW CONTROL
IEEE 802.3AF
FEATURES
NUMBER OF PORTS:
1 1000BaseT withRJ-45 Connector
1 1000BaseSX/LX with fiber SFP Slot
DATA TRANSFER RATE
2000Mbps/full duplex
TRANSMISSION MEDIA
TP: 1000Base T Cat. 5, 5E, 6 UTP/STP, up to 100 m
1000Base SX:
50/125µm Multi Mode Fiber optic cable, up to
220 m 62.5/125µm Multi Mode Fiber optic
cable up to 550 m
1000BaseLX:9/125µm Single Mode Fiber optic cable
LED INDICATORS
Per port:
(TX): Link, TX
(FX): Link, RX
Per Unit: Power, Link/ACT, 1000M, PoE
POWER SUPPLY
18 watts
POWER CONSUMPTION
3 Watts (MAX)
DIMESIONS
WEIGHT
50g
OPERATION TEMPERATURE
0 to 60ºC
STORAGE TEMPERATURE
-20 TO 90ºC
HUMIDITY
10 to 90% RH (non condensing)
CERTIFICATIONS
FCC Class A, CE
ORDERING INFORMATION
DCE/48V-POF-GB 48V POE GB INJECTOR OVER FIBER
55
DATA CONNECT ENTERPRISE
PHONE: 301.924.7400 EXT 17
3405 OLANDWOOD CT
FAX: 301.924.7403
OLNEY, MD 20832
USA
www.data-connect.com
INDUSTRIAL SOLUTIONS
NETWORK ANYWHERE
POE & ATA SOLUTIONS
60 VOLT POE SURGE SUPPRESSOR
56
The Data Connect Surge Protected Registered Jacks
protect devices against a wide range of transient
surges from any source including lightening induced
transient surges and the frequent daily sags in electricity that are followed by transient surges induced when
the electricity is restored to the original level. Most
dangerous surges are incidental in nature and can be
attributed to: turning on the florescent lights, microwave, toaster oven, space heaters, computers, and machinery; and use of printers, copiers, and or faxes. Of
course the more obvious is manufacturing and welding
shops on your electrical grid, restoration of power, and
lightening.
Unfortunately, transient surges can enter communication equipment and inflict damage through any connection, not just the AC power lines. Facilities with
reliable AC power protectors can still experience surge
-related downtime. The transient AC surges are
clamped to the shared common ground that can result
in damage to expensive communication hardware; as
these surges pass through other grounded connections and into sensitive electronic equipment, particularly network communication equipment.
The DCE SPRJ series of Surge Protected Registered
Jacks cover a broad range of infrastructure requirements. From single-line dial-up devices to Category 6
Ethernet devices, the DCE SPRJ series of surge protectors can insure that your infrastructure is protected.
FEATURES -Compact form factor
-Extremely fast 5 nanoseconds response time
-High Energy handling capability
-Ability to protect almost all devices that transmits data
over copper
ORDERING INFORMATION
DCE/60V-POE 60 VOLT POE SURGE SUPPRESSOR
56
DATA CONNECT ENTERPRISE
PHONE: 301.924.7400 EXT 17
3405 OLANDWOOD CT
FAX: 301.924.7403
OLNEY, MD 20832
USA
www.data-connect.com
INDUSTRIAL SOLUTIONS
NETWORK ANYWHERE
POE & ATA SOLUTIONS
SSRJ SURGE SEPPRESSORS
57
SPECIFICATIONS
10 BASE T
RS422,
RS423
100 BASE
T
ETHEERNET
CAT5/5E
1000 BASE
T
ETHERNET
CAT 6
POWER
OVER
ETHERNE
T (MODE
A)
POWER
OVER
ETHERNET
(MODE B)
PINS 1, 2, 3,
& 6 -7.5
VOLTS
RS232
DIGITAL
ISDN DDS,
T1/E1 CSU/
DSU, DSL
ANALOG
DIAL-UP /
MODEM,
FAX
STD CLAMP
VOLTAGE
7.5 VOLTS
12 VOLTS
7.5 VOLTS
60 VOLTS
PINS 1, 2, 3,
& 6 -60
VOLTS
18
VOLTS
60 VOLTS
246
VOLTS
PEAK PULSE
CURRENT
10/1000 US
S.C. WAVEFORM @Vcl
132 AMPS
97 AMPS
100 AMPS
50 AMPS
PINS 1, 2, 3,
& 6 -132
AMPS
60
AMPS
50 AMPS
75 AMPS
RESPOSE
TIME
<5 NANOSECONDS
<5 NANOSECONDS
<5 NANOSECONDS
<5 NANOSECONDS
<5 NANOSECONDS
<5
NANOSECONDS
<5 NANOSECONDS
<5 NANOSECONDS
MAXIMUM
SHUNT CAPACITANCE
<40pF
<25pF
MTJ C6
<8pF CAT 6
-PPC <5pF
(DEVICE
ONLY)
<75pF
<25pF
(ETHERNET
LINES ONLY)
<40pF
<75pF
<95pF
ORDERING INFORMATION
DCE/SPRJ-08E/RJ45
DCE/SPRJ-04E/RJ45
DCE/SPRJ-C5E/RJ45
DCE/SPRJ-045-C/RJ45
DCE/SPRJ-08E/RJ45
DCE/SPRJ-04T/RR45
DCE/SPRJ-08T/RJ45
DCE/SPRJ-ISDN
DCE/SPRJ-DIGITAL
DCE/SPRJ-DDS
DCE/SPRJ-T1
DCE/SPRJ-08G/RJ45
DCE/SPRJ-C6/RJ45
DCE/SPRJ-POE-A
DCE/SPRJ-POE-B
DCE/SPRJ-04E-RJ11
DCE/SPRJ-06E/RJ11
DCE/SPRJ-DSL
DCE/SPRJ-02G/RJ11
DCE/SPRJ-04G/RJ11
DCE/SPRJ-06G/RJ11
10BASE T ETHERNET, 8 WIRE, ALL PINS
10BASE T ETHERNET, WIRES 1, 2, 3, AND 6 PROTECTED
100BASET ETHERNET, 8 WIRE, ALL PINS
RS422, 4 WIRE, 4 CENTER PINS
RS422, 8 WIRE, ALL PINS
RS232, 4 WIRE,4 CENTER PINS
RS232, 8 WIRE, ALL PINS
CSU/DSU OR ISDN, 4 WIRE, 4 CENTER PINS
CSU/DSU, DIGITAL, OR T1, 8 WIRE, ALL PINS
DDS WIRES 1, 2, 7, 8 PROTECTED
T1, PINS 1, 2, 4, 5 PROTECTED
DIA-UP MODEM / FAX, 8 WIRE, ALL PINS
1000BASE T ETHERNET, CAT6, 8 WIRE, ALL PINS
POWER OVER ETHERNET, (MODE A) 8 WIRE, ALL PINS 48,24, 12VDC
POWER OVER ETHERNET, (MODE B) 8 WIRE, ALL PINS 48, 24, 12VDC
RS422/423, 4 WIRE, 4 CENTER PINS
RS422/423, 6 WIRE, ALL PINS
DSL, 6 WIRE, ALL PINS
DIA-UP MODEM / FAX, 2 WIRE, 2 CENTER PINS
DIA-UP MODEM / FAX, 4 WIRE, 4 CENTER PINS
DIA-UP MODEM / FAX, 6 WIRE, ALL PINS
57
DATA CONNECT ENTERPRISE
PHONE: 301.924.7400 EXT 17
3405 OLANDWOOD CT
FAX: 301.924.7403
OLNEY, MD 20832
USA
www.data-connect.com
INDUSTRIAL SOLUTIONS
NETWORK ANYWHERE
DIAL LINE & DEMARC EXTENSION
FIBER CHASSIS
58
DIAL LINE & DEMARC EXTENSION CHART
MODEL
VOLTAGE
MAX
SPEED
STATION
STANDALONE
RACKMOUNT
FIBER-TEL
100240VAC
64 KBPS
√
√
√
FIBER-TEL/FAX
100240VAC
14,4KBPS
√
√
√
FIBER-TEL/DIAL
100240VAC
14.4KBPS
√
√
√
COPPER-T
1001.544 MBPS
240VAC
COPPER-E
1002.048 MBPS
240VAC
FIBER-T
1001.544 MBPS
240VAC
FIBER-E
1002.048 MBPS
240VAC
QUADFIBER-T
1006.176 MBPS
240VAC
QUADFIBER-E
1008.192 MBPS
240VAC
T1
E1
T3
E3
√
√
√
√
√
√
√
√
FIBER-T3
100240VAC
45 MBPS
FIBER-E3
100240VAC
34 MBPS
RM20UI
100240VAC
CHASSIS
√
√
RM16UI
100240VAC
CHASSIS
√
√
RM1UI
100240VAC
CHASSIS
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
58
DATA CONNECT ENTERPRISE
PHONE: 301.924.7400 EXT 17
3405 OLANDWOOD CT
FAX: 301.924.7403
OLNEY, MD 20832
USA
www.data-connect.com
INDUSTRIAL SOLUTIONS
NETWORK ANYWHERE
59
DIAL LINE & DEMARC EXTENSION
DIAL LINE & DEMARC EXTENSION CHART
DIAL LINE & DEMARC EXTENSION SOLUTIONS
In This Section
Fiber Telephone Line Extension
Fiber Fax Line Extension
Fiber Dial Modem Line Extension
Copper T1 DEMARC Extension
Copper E1 DEMARC Extension
Fiber T1 DEMARC Extension
Fiber E1 DEMARC Extension
Quad Fiber T1 Extension
Quad Fiber E1 Extension
Fiber T3 Extension
Fiber E3 Extension
20 Slot Universal Power 19” Chassis
16 Slot Universal Power 19”Chassis
1 slot Universal Power 19” Chassis
Pg 60
Pg 60
Pg 60
Pg 61
Pg 61
Pg 62
Pg 62
Pg 63
Pg 63
Pg 64
Pg 64
Pg 65
Pg 66
Pg 67
The Technology
In recent years it has become apparent that fiber-optics are steadily replacing copper wire as an appropriate means
of communication signal transmission. They extend the long distances between local phone systems as well as providing the backbone for many network systems. Other system users include cable television services, university campuses, office buildings, industrial plants, and electric utility companies.
A fiber-optic system is similar to the copper wire system that fiber-optics is replacing. The difference is that fiberoptics use light pulses to transmit information down fiber lines instead of using electronic pulses to transmit information down copper lines. Looking at the components in a fiber-optic chain will give a better understanding of how the
system works in conjunction with wire based systems.
At one end of the system is a transmitter. This is the place of origin for information coming on to fiber-optic lines.
The transmitter accepts coded electronic pulse information coming from copper wire. It then processes and translates
that information into equivalently coded light pulses. A light-emitting diode (LED) or an injection-laser diode (ILD) can
be used for generating the light pulses. Using a lens, the light pulses are funneled into the fiber-optic medium where
they travel down the cable. The light (near infrared) is most often 1,300nm on Multi-mode fiber and 1300nm for singlemode fiber and 1,500nm is used for longer extensions.
In fiber optic communications, wavelength-division multiplexing (WDM) is a technology which multiplexes a number
of optical carrier signals onto a single optical fiber using different wavelengths (colors) of laser lights. This technique
enables bidirectional communications over one strand of fiber, as well as multiplication of capacity.
At Data Connect, we offer a wide range of products to suite your network needs. We can assist you in finding a solution that maximizes your investment while providing the solutions that will benefit your customers both now and for
years to come. With the ability to use copper or fiber at your customer’s locations, Dial Line & DEMARC extension becomes a wise choice and made easy.
59
DATA CONNECT ENTERPRISE
PHONE: 301.924.7400 EXT 17
3405 OLANDWOOD CT
FAX: 301.924.7403
OLNEY, MD 20832
USA
www.data-connect.com
INDUSTRIAL SOLUTIONS
NETWORK ANYWHERE
DIAL LINE & DEMARC EXTENSION
IN THIS SECTION & THE TECHNOLOGY
60
DCE FIBER TEL / FAX / DIAL
DCE/Fiber-Tel is a fiber dial line and telephone converter extender that is used to connect PSTN voice,
fax and modem signals to distant Plain Old Telephone
(POTS) devices such as analog phones, faxes, and
dial modems. DCE/Fiber-Tel is required to implement
an end to end system. FXS mode is the reciprocal
unit and has ability to act as PSTN and connects to a
telephone device. When the DCE/Fiber-Tel card is
placed in the DCE/RM16 rack with SNMP management,
in-band management allows viewing the card and remote converters status, type, version, fiber link status,
on hook status and alarms. Both card and remote can
be configured to enable or disable the port, reset the
port and set the FXO (CO) and FXS (CPE) mode.
FEATURES
Extend voice, fax and modem transmission from 2km
to120km over fiber
Network management via terminal, web or
SNMP in
DCE/RM20 chassis
Supports telephone voice transmission
Support caller ID pass through
Selectable FXO or FXS mode
Supports FXS to FXS hot line
APPLICATIONS
SPECIFICATIONS
Connector:
Cable Type:
1x (SC, ST, FC) or SFP LC
MM 62.2/125µm, 50/125µm.
SM 9/125µm
Cable Length:
MM 2km,
SM 15/30/50/80/120km
WDM 20/40/60/80km
Wavelength: MM1310nm, SM 1310
1550nmRx WDM
1310Tx/1550Rx (type A),
1550Tx/1310Rx (type B)
Connector:
RJ-11
Impedance:
600 ohms
Coding:
16bits liner
loop Current: 10~100mA
Ring Frequency:
Acceptable 20~50Hz
Insertion Loss:0.0 ± 1.0db at 1000Hz
Impedance:
600 ohms
Coding:
16bits liner
Dial:
DTMF and Dial Paul
Battery source:
48VDC ±4V
Ringing Waveform: Sine Wave
Ringing Frequency: 20/25/30/50 Hz selectable
FXS to FXs:
On/1 sec, off /2 sec
FXO to FXS: Reproduces the cadence detected
by FXO Insertion Loss: 0.0±1.0dB at 1000Hz
REN:
4.0B (Ring Equivalence Number)
LEDs:
Power, FX Link, Phone Act, Test
Power:
DC in 12V
Power Consumption: <5W
Dimensions: 155 x 88 x 23 (D x W x H) mm
Weight:
120g
Temperature: 0~50˚C (operation), 0~70˚C
(storage)
Humidity :
10~90% non condensing
Certification: CE, FCC, LVD, and RoHS
ORDERING INFORMATION
DCE/FIBER-TEL
Fiber Telephone Line Extension
DCE/FIBER-TEL/FAX Fiber Fax Line Extension
DCE/FIBER-TEL/DIAL Fiber Dial Modem Extension
60
DATA CONNECT ENTERPRISE
PHONE: 301.924.7400 EXT 17
3405 OLANDWOOD CT
FAX: 301.924.7403
OLNEY, MD 20832
USA
www.data-connect.com
INDUSTRIAL SOLUTIONS
NETWORK
61 ANYWHERE
DIAL LINE & DEMARC EXTENSION
FOR YOUR NOTES
DCE COPPER-T
The Data Connect Copper-T and Copper-E are 4-wire repeaters
for use on customer owned lines or to extend telephone company
demarcs. The Extenders are used to extend in-house T1 and E1
lines in campus and high rise environments.
Each pair of T1 and E1 Extenders may be located up to 5000 feet
apart. The Extenders circuitry is rated to -36 dB dynamic range the
T1 rate of 1.544 Mbps and -43 dB dynamic range at an E1 rate of
2.048 Mbps. As implemented, the parts are slightly de-rated to
provide long life at extended temperature range. Therefore the
distances specified in this document are only 5000 feet solid copper 22 AWG, two twisted pair is the preferred cable for connection
between the Extenders. Connection to the Extenders is made
through RJ-45 modular connectors or 4-wire screw down barrier
stripes. Each Extender come standard with two screws down barrier strips and one RJ-45 connector. If only RJ-45 connections are
desired extra RJ-45 adaptors (part number 9502122) can be ordered.
The DCE Copper-T and Copper-E are powered by a small wallmount transformer. The Extenders are designed for connections
between T1 equipment such as PBXs, T1/E1 multiplexers, T1/E1
line drivers, CSUs, routers or any other T1/E1 equipment requiring
long customer owned cable runs. The T-Extenders/ E-Extenders
are transparent to the type of data sent over the T1/E1
The T-Extenders are most often used in pairs to extend a telephone company demarc. For example, if a CSU or DSU is limited at
655 feet and is connecting to a phone company smart jack demarc
which is limited to 655 feet, the T-Extenders are used in pairs to
extend that distance up to 5000 feet.
FEATURES
Extend Phone Company Demarc
T1 or E1 4-wire repeater
Extends T1 or E1 lines
Up to 5000 feet between units
RJ-45 or screw down connectors
Simple connection to 4-wire circuits
Inexpensive solution to long cable runs
120/220 VAC, 12, 24, 48, or 125 VDC available
1U high rack mountable, 1, 2, or 3x19” rack
20 slot rack chassis option
SPECIFICATIONS
GENERAL
T1 repeater or E1 repeater
Extends T1 or E1 bi-polar signals
Up to 5000 feet between T-extenders
Up to 4000 feet between E-extenders
INDICATORS
Power
ACCESSORIES
RJ-45 wiring adaptor p/n 9502122
Customer to demarc RJ-45 cable p/n 9500095
Customer to customer RJ-45 crossover cable p/n 9500099
Rack shelf, 1 U for 1 to 3 T1/E1
EXTENDERS
20 slot, 4U high 19” rack mount chassis
PHYSICAL / ELECTRICAL
5.5” x &.5 x 1.5”
100 ohm T1, 120 ohm E1 interface
2 Ibs including wall transformer
120 VAC external wall transformer supply
Optional 220 VAC, 12, 24, 48, 125 VDC 30 ma
Operating Temperature: -40˚C to +70˚C
Operating Humidity: <98% non- considering
WIRE
Two twisted pair solid copper
other types will affect operational distance
CONNECTORS
RJ-45 modular 8-conductor connectors
Pin 1 = Receive
Pin 2 =Receive
Pin 4 =Transmit
Pin 5 =Transmit
4-Wire barrier strip
Pin 1 = Receive
Pin 2 =Receive
Connect the transmit pair of one extender to
the receive pair of the other extender. Pairs are not
polarity sensitive. Units supplied with 2 screw
downs, 1 RJ-45.
Note! This product is NOT for 10BaseT or Ethernet
ODERING INFORMATION
DCE/COPPER-T
DCE.COPPER-E
T-1 Copper Extender
E1 Copper Extender
61
DATA CONNECT ENTERPRISE
PHONE: 301.924.7400 EXT 17
3405 OLANDWOOD CT
FAX: 301.924.7403
OLNEY, MD 20832
USA
www.data-connect.com
INDUSTRIAL SOLUTIONS
NETWORK ANYWHERE
DIAL LINE & DEMARC EXTENSION
FIBER T / E EXTENSION
62
DCE FIBER-T/E
SPECIFICATIONS
STANDARD
E1: ITU-T G.703, G.704, G.706, G.732, G.823
T1: ITU-T G.703, G.704, AT&T TR-62411, ANSI T.403
LEDs
PWR, Fiber Link, Line (e1 or T1) Link, Test Mode
The DCE/Fiber-E is a media E1 extender for G.703 transmission. The BNC
model provides unbalanced 75 Ohm coaxial connections while the RJ-45
model provides balanced 120 Ohm connections over twisted pair wiring.
The DCE/Fiber-T is a fiber media T1 extender for G.703 T1 transmission
and features an RJ-45 connector for connection to 100 Ohm twisted pair
wiring. When the DCE/Fiber-T/E card is placed in the DCE/Fiber-T/E-SAKIT with SNMP management the card status, type, version, fiber link
status, E1 or T1 link status and alarms can all be displayed. Configuration
is also available to enable or disable the port, reset the port, do far end
fault setting, and initiate local or far end loop-back tests.
DCE/FIBER-T/E-LP
External AC Adapter
9VDC@ 1A
DCE/FIBER-T/E-UI
AC Model: 100-240 VAC
± 10%
Frequency 50-60 Hz
DC Model: 24-72 VDC ± 10%
ENVIRONMENT
Temperature:
0-50°C (Operating)
0-70°C (Storage)
FEATURES:
Network management via Terminal or SNMP in FRM301 Chassis
T1/E1 RJ-45(USOC RJ-48C) or Coax (BNC) to Fiber Converter
Support AMI or B8ZS/HDB3 line codes
Unframed (transparent clear channel)
User selectable line code setting
Far End Fault (FEF) setting
Loop back test
HUMIDITY
20-80% non condensing (Operating)
10-90% (Storage)
POWER CONSUMPTION
DCE/Fiber-T/E-LP: < 5W
DCE/Fiber-T/E-UI: < 2W
ORDERING INFORMATION
PRODUCT
POWER
INTERFACE
TYPE
CONNECTOR
TYPE
CONNECTIVITY:
DISTANCE
___/_____-_
__
___
__
___
DCE/FIBER-T
UI
E1R
ST
002: 2km
DCE/FIBER-E
LP
E1B
SC
015: 15km
T1R
LC
030: 30km
050: 50km
080: 80km
DIMENSIONS
DCE/Fiber-T/E-LP: 85.6mm x 122.6mm x 20mm
DCE/Fiber-T/E-UI: 85.6mm x 191.7mm x 30mm
WEIGHT
DCE/Fiber-T/E-LP: 300g
DCE/Fiber-T/E-UI:
AC model: 500g
DC model: 550g
COMPLIANCE
CE, FCC Class
MTBF
65000 Hours
120: 120km
*20A: 20km
APPLICATIONS
*20B: 20km
[WDM only]
*40A: 40km
*40B: 40km
[WDM only]
*20A must use couple with 20B
*40A must use couple with 40B
62
DATA CONNECT ENTERPRISE
PHONE: 301.924.7400 EXT 17
3405 OLANDWOOD CT
FAX: 301.924.7403
OLNEY, MD 20832
USA
www.data-connect.com
INDUSTRIAL SOLUTIONS
NETWORK ANYWHERE
DIAL LINE & DEMARC EXTENSION
QUAD FIBER T / E ENTENSION
63
DCE-QUADFIBER-T/E
The DCE/QuadFiber-T/E is a 1U half 19” stand-alone or rack mountable
T1/E1 Extender featuring a point-to-point multiplexer for 4*E1 or 4*T1
(selectable) transmissions over a single fiber optic link. Its half-rack format make it ideal for low cost multiplexing applications that require up to
4-channel. All channels provide completely transparent transmission of
E1 or T1 regardless of frame mode, clock source or timeslot assignment.
Available in either AC or DC models, the AC supplies operate from
100~240VAC while DC supplies operate from 18~72VDC. A Wide range of
transceiver selection provides fiber connection with SC, FC or ST type
connectors in multimode or single mode and at distance from 2 to 120km
as well as BiDi (single fiber) at distances of 20, 40, 60, or 80km. Additional
options include “Order Wire” phone connectors (FXS port) and a SNMP
management.
SPECIFICATIONS
Connector: 1x9 (SC, ST, FC)
Data rate: 38Mbps
Bit Error Rate: Less then 10¯¹¹
Cable Type: MM 62.2/125µm, 50/125µm. SM 9/125µm
Distance: MM 2km, SM 15/30/50/80/120km, WDM 20/40/60/80km
Wavelength: 1310, 1550nm
Consol: RS232 (DB9F) Async
SNMP: RJ45
Order wire: RJ11
E1: BNC 75 Ω, RJ45 Ω, T1 RJ45 100 Ω, 100 Meters Ω
E1:ITU-T, T1:ITU-T, ATT&T, ANSI
LEDs: PWR, Alarm, Far End /Near End Error, System Failure, E1/
T1 status
FEATURES
1U stand-alone unit
Channel service setting and remote loop-back setting via front panel
DIP switch or serial console
Far End Fault (FEF) on fiber link, selectable
On-line Bit Error Rate monitor feature with four error-rate classes
Dual color LEDs indicators
Optional dedicated Order Wire phone port (FXS, RJ-11 port)
Console port and one alarm relay
Optional SNMP management, Telnet, and Web Based local and re-
Power: 100~240VAC, DC24: 18 ~ 36V, DC48: 36 ~ 72V
Power Consumption: < 20W
Dimensions (D x W x H) mm: 235 x 195 x 45mm
Weight: 850g
Temperature: 0~50°C (Operating), 0~70°C (Storage)
Humidity: 10~90% non-condensing
Certification: CE, FCC, RoHS
MTBF: 57350 hours
ORDERING INFORMATION
PRODUCT
POWER
INTERFACE
TYPE
CONNECTOR
TYPE
CONNECTIVITY:
DISTANCE
___/_________-_
__
___
__
___
DCE/QUADFIBER-T
UI
E1R
ST
002: 2km
DCE/QUADFIBER-E
DC
E1B
SC
015: 15km
T1R
LC
030: 30km
APPLICATIONS
050: 50km
080: 80km
120: 120km
*20A: 20km
*20B: 20km
[WDM only]
*40A: 40km
*40B: 40km
[WDM only]
*20A must use couple with 20B
*40A must use couple with 40B
63
DATA CONNECT ENTERPRISE
PHONE: 301.924.7400 EXT 17
3405 OLANDWOOD CT
FAX: 301.924.7403
OLNEY, MD 20832
USA
www.data-connect.com
INDUSTRIAL SOLUTIONS
NETWORK ANYWHERE
DIAL LINE & DEMARC EXTENSION
FIBER T-3 / E-3 EXTENSION
64
DCE FIBER-T3/E3
The DCE/Fiber-T3, STM-1 Based Multi-Service provisioning platform is used to
extended T3/E3/DS3 networks over fiber connection, features an advanced
compact Add Drop Multiplexer which can transmit up to 63 E1 and/or data
service such as V.35 and Ethernet via an SMT-1 ring the optical interface complies with international telecommunication standards, such as ITU-T G.655,
652, and G.653. By utilizing a modular design for aggregate and low speed
tributaries, the SDH01A can meet your network demands with flexible combination of services at a lower cost. All of the pluggable modules are designed
to be hot swapped without an interruption to traffic when plugging in or out. In
addition to the E1 tributaries, other data interfaces are also provided for data
communications such as V.35 and 10/100M Ethernet. Users can select any
combination of modules according to their requirements. With its full function
and multi-access capability, the DCE/Fiber-T3 is your best choice for optical
SDH networks.
SPECIFICATIONS
Connector:
Data Rate:
Cable type:
Distance:
Wavelength:
Console:
SNMP, LAN:
Alarm:
Frame Ground:
STM1:
E1:
Ethernet:
1x9 (SC, FC)
155.52Mbpbs (STM-1)
SM9/125µm
SM 30/60/120km, WDM 60km
1310nm, 1550nm
D-type 9-pin female
RJ45
D-type 9-pin male
Screw
ITU-T G.707, G841, G.783, G.803, G.652
ITU-T G.703 G.704, G.706, G.732, G.823
TU-T G.7041 GFP-F, G.707 VCAT,
IEEE802.3x, 802.1p, 802.1q, 802.3ad,
801.1w, 802.1d
V35:
ITU-T V.35, ITU-T G703
LEDs:
PWR, WK, FLT-fault, Alarm, ACO, RDI,
LBK, Channels, Ethernet
Power:
AC: 90~264V
DC: -36~-72V
Pwr. Consumptn.: <15W
Dimensions:
312 x 440 x 44mm (D x W x H)
Weight:
3.6kg
Temperature
0~50˚C (Operating), 0~70˚C (Storage)
Humidity:
10~90% non condensing
Certification
CE, FCC, RoSH
MTBF
55,000 hours
FEATURES
Standalone and rack-mount in 19 or 23 inch EIA rack
Up to 32 E1 (4, 8, 12, 16 & 32) (*T1 optional also)
Flexible ADM (add/drop multiplexer) with 63 available VC12 resources
Up to 4 tributary cards per unit
Every module hot swappable
Backup configuration in flash for system restart of power failure
Various service, such as E1, V.35 and 10/100M Ethernet
Ethernet traffic is encapsulated and transported over SDH using Generic Framing Procedure (GFP) & Virtual Concatenation (VCAT)
E1 transparent transmission with HDB3 or AMI line coding
EoS (Ethernet over SDH) for ELAN. Support Ethernet traffic in all nodes of rings
Single-ended network management
1+1 APS for optical line and module (optical redundancy)
Three timing synchronization modes
Alarm relays
Alarm and performance monitoring
Administration security with login by username and password assigned by
supervisor
Menu-driven and SNMP management interfaces
Local and remote loop back functions for optical and E1 I/Fs
Dual power AC + DC
ORDERING INFORMATION
INTERFACE
TYPE
CONNECTOR
TYPE
CONNECTIVITY:
DISTANCE
PRODUCT
POWER
___/_____-__
__
___
__
___
DCE/FIBER-T3
UI
E1R
ST
002: 2km
DCE/FIBER-E3
LP
E1B
SC
015: 15km
T1R
LC
030: 30km
050: 50km
080: 80km
120: 120km
*20A: 20km
*20B: 20km
[WDM only]
*40A: 40km
*40B: 40km
[WDM only]
*20A must use couple with 20B
*40A must use couple with 40B
64
DATA CONNECT ENTERPRISE
PHONE: 301.924.7400 EXT 17
3405 OLANDWOOD CT
FAX: 301.924.7403
OLNEY, MD 20832
USA
www.data-connect.com
INDUSTRIAL SOLUTIONS
NETWORK ANYWHERE
DIAL LINE & DEMARC EXTENSION
FIBER CHASSIS
65
DCE/FIBER CHASSIS
The DCE/RM_UI Chassis Product line includes various metal chassis sizes, which can hold from one to twenty DCE/FIBER slide-in
modules. The DCE/RM1U is one slot chassis, which can be installed
with one single width blade card for stand-alone applications. The
available power options are external AC adapter, built-in AC, DC
power or built-in AC+DC, AC+AC, DC+DC dual power. The DCE//
RM1U-M is one slot chassis with DB9 console port for local management, which can be installed with one single width blade card
for stand-alone applications. The available power options are builtin AC, DC or built-in AC+DC dual power. The DCE/RM2U is a two
slot chassis, which can be installed with one double width blade
card for stand-alone applications. The only available Power supply
option is an external AC adapter.
SPECIFICATIONS
Temperature: 0 - 50°C (Operating), 0 - 70o C (Storage)
Humidity: 20-80% non-condensing (Operating), 10-90% (Storage)
Power: Input: 1+1 Redundancy mode, Hot-swappable
AC Power Module Input: Universal, 100~240VAC; Freq.: 47~63 Hz
AC Power Consumption: 150W
DC Power Module: Input: 36~72 VDC & 18~-36VDC (option)
DC Power Consumption: 150W
Fan: Removable type for ease maintenance
Dimensions: 440mm x 280mm x 130.6mm (L x W x H).
Weight: 6.2Kg (include 1 AC power modules & two ear panels for rackmounting)
Compliance: FCC part 15, Subpart B, Class A, ANSI C63.4:2003,
CE EN55022:2006, Class A, EN55024:1998+A1:2001+A2:2003
LVD: EN 60 950-1:2001
MTBF: 65,000 h (25°C)
_____________________________________________________
SPECIFICATIONS
One slot chassis with single width blade line cards.
Available in six types: external power adapter or power built-in
AC, DC, AC+DC, AC+AC, or DC+DC
No fans
Dimensions:
External adapter: 160 x 88 x 24mm (D x W x H)
Internal power: 180 x 135 x 35mm (D x W x H)
External adapter:
Input voltage 100 ~ 240VAC 50/60Hz
Output voltage 12VDC 1A
AC power 100 ~ 240VAC
DC power 24VDC, 48VDC, 72VDC
The DCE RM16UI is the complete solution to aggregate standalone
fiber extenders into a single chassis, 19" or 23" rack mountable. The
chassis can hold DCE FIBER-T/E and FIBER-TEL. FRM301 is the perfect choice to better organize the increasing number of standalone
media converter into a single shelf, while keeping a total control and
management through the SNMP module. The chassis provides redundant power supply system with "hot swap" feature, to provide continuous smooth operation of the units installed. It can hold both AC
(110V) and DC (48V) power supply units, either in mixed or same type
of power input.
The FRM220-CH20 is a 2U high 19" Rack, 20 slot modular media converter rack. It provides an economic solution in high density fiber converter installations in enterprises or central offices. All critical components, power, fans, management module and interface cards are hot
swappable, allowing online field replacement. The hot-swappable
power modules can be chosen from AC 100-240V, DC 18-36 or DC 3672V. The chassis also has a pair of alarm relays and is able to stack
____________________________________________________
The DCE RM16UI is a 3U, 19(23)" fiber media platform rack that
features 16 cards capacity. Supported cards include Ethernet
copper to fiber converters for 10/100Base-TX or 10/100/1000BaseTX over multimode fiber (up to 2 km), single mode fiber (up to 120
FEATURES
FEATURES
3U 19” 16-slot Chassis with AC/DC power redundancy
All modules and cards support hot-swapping
Two alarm relays
SNMP:
Supports local / remote monitor
Supports local configuration
Supports online TFTP f/w upgrade
Supports multiple accesses for SNMP management
Supports Windows® GUI management, Telnet, Serial console
Supports console RS-232 port and 10/100Base-T Ethernet port
Supports SNMP standard MIB II and proprietary MIB
2U 19” 20-slot Chassis with AC/DC power redundancy
Chassis cascade up to 10 with one IP management
Chassis backplane consists of passive components
All modules and cards support hot-swap function
Two alarm relays
NETWORK MANAGEMENTCONTROLLER:
Supports local / remote monitor and configuration
Supports local / remote online TFTP f/w upgrade
Fiber transceiver status & info display
Supports multiple accesses for SNMP management
Supports Web GUI management, Telnet, Serial console
Supports console RS-232 port and 10/100Base-T Ethernet port
Supports SNMP standard MIB II and proprietary MIB
Supports NTP time synchronization
Supports 100 entries system log
SPECIFICATIONS NEXT PAGE ———————>
65
DATA CONNECT ENTERPRISE
PHONE: 301.924.7400 EXT 17
3405 OLANDWOOD CT
FAX: 301.924.7403
OLNEY, MD 20832
USA
www.data-connect.com
INDUSTRIAL SOLUTIONS
NETWORK ANYWHERE
DIAL LINE & DEMARC EXTENSION
FIBER T-3 / E-3 EXTENSION
66
DCE FIBER CHASSIS (Cont’d)
SPECIFICATIONS
One slot chassis for FRM220 Single width blade line cards.
Available in six types: external power adapter or power built-in
AC, DC, AC+DC, AC+AC, or DC+DC
No fans
Dimensions:
External adapter: 160 x 88 x 24mm (D x W x H)
Internal power: 180 x 135 x 35mm (D x W x H)
External adapter:
Input voltage 100 ~ 240VAC 50/60Hz
Output voltage 12VDC 1A
AC power 100 ~ 240VAC
DC power 24VDC, 48VDC, 72VDC
FIBER CHASSIS ORDERING INFORMATION
DCE/RM1UI
DCE/RM1UI-PS
DCE/RM1UI-PSVDC48
DCE/RM1UI-PSVDC24
DCE/RM1UI-PSVDC72
DCE/RM16UI
DCE/RM16UI-PSVAC
DCE/RM16UI-PSVDC48
DCE/RM16UI-PSVDC24
DCE/RM16UI-FAN
DCE/RM20UI
DCE/RM20UI-PSVAC
DCE/RM20UI-PSVDC48
DCE/RM20UI-PSVDC24
DCE/RM20UI-FAN
DATA CONNECT ONE SLOT CHASSIS 100-240VAC
DATA CONNECT ONE SLOT REDUNDANT POWER SUPPLY 100-240VAC
DATA CONNECT ONE SLOT REDUNDANT POWER SUPPLY 48VDC
DATA CONNECT ONE SLOT REDUNDANT POWER SUPPLY 24VDC
DATA CONNECT ONE SLOT REDUNDANT POWER SUPPLY 72VDC
DATA CONNECT SIXTEEN SLOT CHASSIS 100-240VAC
DATA CONNECT SIXTTEN SLOT REDUNDANT POWER SUPPLY 100-240VAC
DATA CONNECT SIXTEEN SLOT REDUNDANT POWER SUPPLY 36 -72VDC
DATA CONNECT SIXTEEN SLOT REDUNDANT POWER SUPPLY 18-36VDC
DATA CONNECT SIXTEEN SLOT FAN
DATA CONNECT TWENTY SLOT CHASSIS 100-240VAC
DATA CONNECT TWENTY SLOT REDUNDANT POWER SUPPLY 100-240VAC
DATA CONNECT TWENTY SLOT REDUNDANT POWER SUPPLY 36 -72VDC
DATA CONNECT TWENTY SLOT REDUNDANT POWER SUPPLY 18-36VDC
DATA CONNECT TWENTY SLOT FAN
66
DATA CONNECT ENTERPRISE
PHONE: 301.924.7400 EXT 17
3405 OLANDWOOD CT
FAX: 301.924.7403
OLNEY, MD 20832
USA
www.data-connect.com
INDUSTRIAL SOLUTIONS
NETWORK ANYWHERE
67
DIAL LINE & DEMARC EXTENSION
FIBER T-3 / E-3 EXTENSION
NOTES
67
DATA CONNECT ENTERPRISE
PHONE: 301.924.7400 EXT 17
3405 OLANDWOOD CT
FAX: 301.924.7403
OLNEY, MD 20832
USA
www.data-connect.com
INDUSTRIAL SOLUTIONS
NETWORK ANYWHERE
CHANNEL BANKS SOLUTIONS
THE TECHNOLOGY
68
The Technology
A channel bank is a multiplexer. A device that puts many slow speed voice or data conversations onto one high
speed link; and, controls the flow of those conversations. Typically the device that sits between a digital T1 circuit;
and, a couple of dozen voice grade lines coming out of a PBX. One side of the channel bank will be connections for
terminating two pairs of wires or coaxial cable that brings in the T1 carrier. On the other side of the channel bank are
connections for terminating multiple tip and ring single line analog phone lines or several digital data streams.
Sometimes you need channel banks and sometimes you don’t. For example if your shipping a bundle of voice
conversations from one local digital PBX to another digital PBX across town you don’t need a channel bank but CSU
(Commercial Service Unit) on each side to connect and recognize the T1 formatted signal. If one or both of the PBX
is analog, you will need a channel bank to recognize the T1 formatted signal.
A channel bank converts a group of FXS or FXO interfaces to higher speed interfaces. When you need to connect
multiple analog/ legacy devices like phones and faxes like those found in a MTU/MDU (Multi Tenant Unit/ Multi Dwelling Unit) facility, to a VoIP network. A generic Multiport FXS/FXO gateway is just not good enough. You need a high
port density channel bank solution which not only aggregates your legacy analog lines but also allows you configurable IP Routing and Quality of Service based on your specific requirements.
At Data Connect, we offer a wide range of products to suite your network needs. We can assist you in finding a
solution that maximizes your investment while providing the solutions that will benefit your customers both now and
for years to come. With the ability to use a channel bank at your customer’s locations to extend a bundle of simultaneous phone calls becomes a wise choice and made easy.
68
DATA CONNECT ENTERPRISE
PHONE: 301.924.7400 EXT 17
3405 OLANDWOOD CT
FAX: 301.924.7403
OLNEY, MD 20832
USA
www.data-connect.com
INDUSTRIAL SOLUTIONS
NETWORK ANYWHERE
CHANNEL BANKS SOLUTIONS
D4 CHANNEL BANK CHART
69
D4 CHANNEL BANK CHART
CSU
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
IP
0
0
24
0
0
20
16
12
8
4
20
16
8
√
√
12
√
12
16
20
0
4
8
12
16
0
4
8
12
0
4
8
0
4
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
8
4
0
16
12
8
4
0
12
8
4
0
8
4
0
4
0
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
MODEL
DCE/D4-FXS-FULL
DCE/D4-FXO-FULL
DCE/D4-MOD
DCE-D4-MOD-4FXS
DCE/D4-MOD-4FXO
DCE/D4-0FXS-4FXO
DCE/D4-0FXS-8FXO
DCE/D4-0FXS-12FXO
DCE/D4-0FXS-16FXO
DCE/D4-0FXS-20FXO
DCE/D4-4FXS-0FXO
DCE/D4-4FXS-4FXO
FXS
24
0
0
4
0
0
0
0
0
0
4
4
FXO
0
24
0
0
4
4
8
12
16
20
0
4
CHASSIS
√ DCE/D4-4FXS-8FXO
4
DCE/D4-4FXS-12FXO
DCE/D4-4FXS-16FXO
DCE/D4-4FXS-20FXO
DCE/D4-8FXS-0FXO
DCE/D4-8FXS-4FXO
DCE/D4-8FXS-8FXO
DCE/D4-8FXS-12FXO
DCE/D4-8FXS-16FXO
DCE/D4-12FXS-0FXO
DCE/D4-12FXS-4FXO
DCE/D4-12FXS-8FXO
DCE/D4-12FXS-12FXO
DCE/D4-16FXS-0FXO
DCE/D4-16FXS-4FXO
DCE/D4-16FXS-8FXO
DCE/D4-20FXS-0FXO
DCE/D4-20FXS-4FXO
4
4
4
8
8
8
8
8
12
12
12
12
16
16
16
20
20
√
√
VOICE
√
√
√
√
√
√
√
√
√
69
DATA CONNECT ENTERPRISE
PHONE: 301.924.7400 EXT 17
3405 OLANDWOOD CT
FAX: 301.924.7403
OLNEY, MD 20832
USA
www.data-connect.com
INDUSTRIAL SOLUTIONS
NETWORK ANYWHERE
CHANNEL BANKS SOLUTIONS
D4 CHANNEL BANK
70
Your telecommunication needs are made easier to manage with Data
Connect Enterprise’s T1 Channel Bank products. Data Connect satisfies
the needs of any T1 channel bank application, no matter how stringent the
requirement. Unique Data Connect features like real-time T1 status on our
four-line by 40 character (4x40) LCD display, or automatic, hands-off configuration utilizing artificial intelligence software, and crystal clear audio
quality proves that Data Connect T1 products are in a top class of their
own. Knowing the T1 Channel Bank is ready to perform means that you
can spend more time developing important customer relationships.
FEATURES
Low cost
Fully populated FXS
Fully populated FXO
Modular FXS/FXO mixed mode capability
CSU self-configuration to proper mode
Digital Signal Processor (DSP) monitoring real-time
Field Software upgradable
Distinctive ring in loop start mode
Caller ID enable in loop start mode
FLASH base system configuration
Data Connect Enterprise offers you a complete line of low cost T1 channel banks including, FXS, FXO, or mixed mode FXS/FXO analog interfaces.
As a bonus, every system comes with our standard fractional V.35 data
port. Add the Data Connect Modular; internal power supply system to list
and Data connect crushes the competition.
Using Asterisk? Data Connect T1 Channel Bank allows you to utilize
analog phones and writing in conjunction with leading-edge Asterisk technology, without having to buy expensive IP telephones. Why go IP when
you can save on installations by using existing wiring? With the Data Connect T1 Channel Bank, you can use lower cost analog phones with digital
feature and get guaranteed T1 voice quality; all while enjoying Asterisk
VoIP technology for off-premise connectivity.
Data Connect T1 Channel Banks are rugged. In the rare case of trouble,
our technical staff is ready to give you support you need, when you need it.
SPECIFICATIONS
Asterisk soft PBX tested and ready.
4x40 LCD real-time status display shows independent AB bit signaling
Automatic T1 configuration using artificial intelligence soft (no configuration switches)
CSU auto detects T1 modes: D4 or ESF, AMI,
B8ZS
T1 CSU via RJ48C, with line
V.35 fractional data interface, user selectable to
56K or 64K
Self diagnostic, verbose error reporting, loopback modes
Single channel configuration (Each channel
may have a different analog start mode, signaling protocol, line current, or gain.)
Telco network uptime and downtime for T1 history
Remote connection via RS-232C or Ethernet
(optional) via windows based graphical user
interface
Immediate, Wink, Loop, Ground, RevPol (loop),
and three DID start protocols
FSK:
Digital DSP · Echo cancellation · Ring
Cadence
Control
Line Current Limit—18mA to 45mA ·
TX and RX
gain control of -5db to +6db
Power Down Control 1 to3 seconds.
FXO:
Digital DSP · Dynamic Impedance
Matching
Ring Cadence Monitoring Timer
·
TX and RX gain control of -15db to +12db
Power: 110VAC, 220VAC, and -48VDC modular power a
supply models
Size:
3.5” H x 17”W x 8.5”D
Weight: 12Ib maximum
19”, 23” or wall mounting kit standard
T1 and analog cables included
ORDERING INFORMATION
DCE/D4-FXS-FULL
DCE/D4-FXO-FULL
DCE/D4-MOD
DCE-D4-MOD-AN-4FXS
DCE/D4-MOD-AN-4FXO
DCE/D4-0FXS-4FXO
DCE/D4-0FXS-8FXO
DCE/D4-0FXS-12FXO
DCE/D4-0FXS-16FXO
DCE/D4-0FXS-20FXO
DCE/D4-4FXS-0FXO
DCE/D4-4FXS-4FXO
DCE/D4-4FXS-8FXO
DCE/D4-4FXS-12FXO
DCE/D4-4FXS-16FXO
DCE/D4-4FXS-20FXO
DCE/D4-8FXS-0FXO
DCE/D4-8FXS-4FXO
DCE/D4-8FXS-8FXO
DCE/D4-8FXS-12FXO
DCE/D4-8FXS-16FXO
DCE/D4-12FXS-0FXO
DCE/D4-12FXS-4FXO
DCE/D4-12FXS-8FXO
DCE/D4-12FXS-12FXO
DCE/D4-16FXS-0FXO
DCE/D4-16FXS-4FXO
DCE/D4-16FXS-8FXO
DCE/D4-20FXS-0FXO
DCE/D4-20FXS-4FXO
DATA CONNECT D4 CHANNEL BANK 24 FXS / 0 FXO
DATA CONNECT D4 CHANNEL BANK 0 FXS / 24 FXO
DATA CONNECT D4 CHANNEL BANK CHSSIS ONLY
DATA CONNECT D4 CHANNEL BANK 4 FXS NO CHASSIS
DATA CONNECT D4 CHANNEL BANK 4 FXO NO CHASSIS
DATA CONNECT D4 CHANNEL BANK 0 FXS / 4 FXO
DATA CONNECT D4 CHANNEL BANK 0 FXS / 8 FXO
DATA CONNECT D4 CHANNEL BANK 0 FXS / 12 FXO
DATA CONNECT D4 CHANNEL BANK 0 FXS / 16 FXO
DATA CONNECT D4 CHANNEL BANK 0 FXS / 20 FXO
DATA CONNECT D4 CHANNEL BANK 4 FXS / 0 FXO
DATA CONNECT D4 CHANNEL BANK 4 FXS / 4 FXO
DATA CONNECT D4 CHANNEL BANK 4 FXS / 8 FXO
DATA CONNECT D4 CHANNEL BANK 4 FXS / 12 FXO
DATA CONNECT D4 CHANNEL BANK 4 FXS / 16 FXO
DATA CONNECT D4 CHANNEL BANK 4 FXS / 20 FXO
DATA CONNECT D4 CHANNEL BANK 8 FXS / 0 FXO
DATA CONNECT D4 CHANNEL BANK 8 FXS / 4 FXO
DATA CONNECT D4 CHANNEL BANK 8 FXS / 8 FXO
DATA CONNECT D4 CHANNEL BANK 8 FXS / 12 FXO
DATA CONNECT D4 CHANNEL BANK 8 FXS / 16 FXO
DATA CONNECT D4 CHANNEL BANK 12 FXS / 0 FXO
DATA CONNECT D4 CHANNEL BANK 12 FXS / 4 FXO
DATA CONNECT D4 CHANNEL BANK 12 FXS / 8 FXO
DATA CONNECT D4 CHANNEL BANK 12 FXS / 12 FXO
DATA CONNECT D4 CHANNEL BANK 16 FXS / 0 FXO
DATA CONNECT D4 CHANNEL BANK 16 FXS / 4 FXO
DATA CONNECT D4 CHANNEL BANK 16 FXS / 8 FXO
DATA CONNECT D4 CHANNEL BANK 20 FXS / 0 FXO
DATA CONNECT D4 CHANNEL BANK 20 FXS / 4 FXO
70
DATA CONNECT ENTERPRISE
PHONE: 301.924.7400 EXT 17
3405 OLANDWOOD CT
FAX: 301.924.7403
OLNEY, MD 20832
USA
www.data-connect.com
INDUSTRIAL SOLUTIONS
NETWORK ANYWHERE
CHANNEL BANKS SOLUTIONS
COMPETITIVE ANALYSIS
71
COMPETITIVE ANALYSIS
Manufacturer:
Adtran
Carrier Access
Carrier Access
DCE/D4-FXS-FULL
Model:
Total Access 750
Adit 600
Access Bank I
24FXS
Web Site Address:
adtran.com
carrieraccess.com
carrieraccess.com
channelbanks.com
Physical size:
2U
2U
1U
2U
Weight:
8 lbs.
11.8 lbs.
14.5 lbs.
12 lbs.
Mounting:
19" or 23" rack mount
19", 23" or wall
19", 23" or wall
19", 23", desktop or wall
Channel Capacity:
24 FXS
24 FXS
24 FXS
24 FXS
T1 Requirements:
Standard 4 wire T1
Standard 4 wire T1
Standard 4 wire T1
Standard 4 wire T1
Start Protocols:
Immediate, Loop,
Immediate, Loop,
Loop or Ground
Ground, and WINK
Ground, and WINK
Ground, and WINK
Immediate, Loop,
Ground, WINK and 3 different
DID
Framing Protocals:
D4, ESF or TR08
D4 or ESF
D4, ESF, TR08 or SLC-96
D4 or ESF
Line Coding:
AMI or B8ZS
AMI or B8ZS
AMI or B8ZS
AMI or B8ZS
Analog Output:
FXO or FXS
FXO or FXS
24 Loop start lines
24 Loop start lines
Display of signaling bits?
No
No
No
Yes
Dual V.35 cards
V.34 and V.90
V.35, RS530,
Data Output:
Method of configuration:
PC, serial port or modem
Caller ID capable:
Power Requirements:
PC, serial port or modem
RS530A or RS449
Automatic Plug and Play T1
configuration
Dip switches
Yes
130VAC max.
Power Usage:
Yes
115VAC
(-)48 VDC
110VAC
3.5A
1A input
1A
Operating Environment:
Humidity:
(-)40C to 70C
Non-cond. up to 95%
32F-104F/0C-40C
Non-cond. up to 95%
32F-122F/0C-50C
Non-cond. up to 95%
32F-166F/0C-70C
Non-cond. up to 95%
Manufacturers Warranty:
10 year limited warranty
10 year limited warranty
5 year warranty
5 year limited warranty
List Price:
$2,256
$4,375
$2,375
$1,495
Every DCE channel bank will configure itself to the T1 when plugged in and powered up. Also standard with each DCE
Channel bank is a 4 line by 40-character LCD display. This display in conjunction with the four menu buttons can be
used to manually configure your channel bank if your installation calls for a more specific needs. I
Every system comes with a fractional V.35 data port (for free) that can be used for the IP router connection. If you have
unused DS0 time slots you can use that band width for IP connectivity.
The DCE channel banks feature a single CSU (for free) that is software controlled, software programmed and will self
boot to the proper mode right out of the box.
Now, with our new modular channel bank, you can custom build a DCE channel bank to your exact specifications. Don’t
need a full 24 line channel bank? No problem. Build your channel bank in four channel increments. Need to combine FXS
and FXO lines into one channel bank? Again, not a problem. You can mix and match FXS and FXO cards also in four line
increments into one DCE chassis.
71
DATA CONNECT ENTERPRISE
PHONE: 301.924.7400 EXT 17
3405 OLANDWOOD CT
FAX: 301.924.7403
OLNEY, MD 20832
USA
www.data-connect.com
INDUSTRIAL MODEMS
MODEM SELECTION GUIDE
72
INDUSTRIAL SOLUTIONS
NETWORK ANYWHERE
BELL STANDALONE PCB CARD
MODEM SELECTION GUIDE
ITU-T STANDARD
√ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ KEY FEATURES
MOUNT
√ √ √ √ √ √ √ √ √ √ √ √ √ √ SECU- DIN WAL
RITY RAIL L
√ √ √ √ 2
√ √ D
2
√ √ 2
√ 2
D
2,4
D
D
2,4
√ 2
D/L
√ 2
D/L
2,4
√ L
D/L
2,4
2,4
√ D/L
L
2,4
√ √ L
2
2,4
2
L
√ 2,4
D
2,4
L
D,L
√ 2
2,4
D,L
2,4
√ L
2,4
√ L
2,4
2
L
2
L
2,4
D
L
D
D
D
V29
V9
202
100- LV HV
V.42
V34BI V34 HFP V32BI V27 V22 V23
103
RACKDIAL / 2/40
T
240 LO HIG
OE
/
S
28.8 19.2
S
4.8 2.4 1.2
MOUN
LEASE WIR
56
1.2
VA W
H
V.42
M
K 14.4K K K K
33.6K K
.3K
T
D
E
K
K
C VDC VDC
BIS
9.6K
√ √ V9
2
MODEL #
56
K
IG56
√ √ √ √ √ √ √ √ IM56
√ √ √ √ √ IG336
√ √ √ 3600LP
√ √ 3342LP
√ √ √ √ √ √ √ 3342E/R
√ √ √ √ √ √ √ IG192HFP
√ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ 3600UI
MM56
IML56
√ √ IG56S
√ √ √ √ IG96HFP
√ √ MIU28.8
DSP9612
√ IG144
√ √ √ OLNEY, MD 20832
USA
www.data-connect.com
3405 OLANDWOOD CT
FAX: 301.924.7403
DATA CONNECT ENTERPRISE
PHONE: 301.924.7400 EXT 17
MIU9.6FPD
1442E/R
√ √ √ √ √ √ √ MIU14.4
√ √ √ √ √ √ √ √ √ 2400E/R
√ √ MIU2.4
√ √ √ √ √ √ √ IGV.23
√ √ √ √ √ √ IG3202T-
√ √ √ √ √ √ √ √ 202TE/R
√ IG202T
√ MIU202T
*MULTI-PROTOCOL ITU-T V.21, V.23, R.35, R.37, R.38A, R.38B, & V.29, BELL 202T & 103 CEGELEC 1200/600 BAUD & INDACTIC 33 COMMUNICATION STANDARDS
72
INDUSTRIAL SOLUTIONS
NETWORK ANYWHERE
INDUSTRIAL MODEMS
IN THIS SECTION & THE TECHNOLOGY
73
IN THIS SECTION
ITU-T & BELL
MODULATIONS / PROTOCOLS
V.92 / V.90
V34BIS
V.34
V.29 / V.27 / BELL 202T
V.32BIS
V.22
V.23
BELL 202T / 103
SPEED
PAGE____
56Kbps
33.6Kbps
28.8Kbps
19.2, 9.6, 4.8, & 1.2Kbps
14.4Kbps
2.4Kbps
1.2Kbps
1.2Kbps
Pg 74-79
Pg 80-85
Pg 86
Pg 87-90
Pg 91-93
Pg 94-95
Pg 96
Pg 97-101
The Technology
The word modem is an acronym for MOdulator / DEModulator. Modems are used to send digital data signals
over analog circuits. The modem uses the Public Switched Telephone Network (PSTN) and either PSTN for dial or
private copper wires for leased line or private wire applications. A 2-Wire Facility is one that supports transmission in two directions simultaneously while mixing signals (Half Duplex) for 2-Wire Leased applications. A 4-Wire
Facility is one that supports transmission in two directions but isolates the signals (Full Duplex) by Frequency,
Time, and Space division plus other techniques that enable reflections to occur without causing the signals to
mix together for 4-Wire Leased applications.
Modems are governed by the International Telecommunications Union – Telecommunications (ITU-T) Service
Sector based in Geneva, Switzerland. The ITU-T sets the (V. Series) standards including V.92 / V.90 at 56Kbps,
V.34BIS at 33.6Kbps, V.34 at 28.8Kbps, V.29 / V.27 at 19.2, 9.6 & 4.8Kbps, V.32BIS at 14.4Kbps, V.22 at 2.4Kbps,
and V.23 at 1.2Kbps. There are also BELL standards still used such as BELL202T at 1.2Kbps and BELL103
at .3Kbps. Most modems today come with built in error correction, data compression technology based on ITU-T
Industry Standards and are used in a wide range of applications.
ISDN Terminal Adapter, DDS Unit, T1/FT1 DSU/CSU, T1 CSU, DSL Router, and Cable Router are all called modems but technically don’t modulate or demodulate. The modems in this section all modulate and demodulate
and meet with the ITU-T and BELL standards. The Security features found in some of the modems offer Password
Protection, Call Guard, and Call Back Security Options..
At Data Connect, we offer a wide range of modem products to suite your network needs. We can assist you in
finding a solution that maximizes your investment while providing the solutions that will benefit your customers
both now and for years to come. With the ability to match all requirements and standards, your choice becomes a
wise choice and made easy by Data Connect expertise.
73
DATA CONNECT ENTERPRISE
PHONE: 301.924.7400 EXT 17
3405 OLANDWOOD CT
FAX: 301.924.7403
OLNEY, MD 20832
USA
www.data-connect.com
INDUSTRIAL SOLUTIONS
NETWORK ANYWHERE
INDUSTRIAL MODEMS
V.92 / V.90 MODEM CHECK LIST
74
V.92 / V.90 MODEM CHECK LIST
MODEL
HIGH
MAX. SPEED VOLT.
LOW
VOLT.
DIAL
LEASED
RACK
MOUNT
DIN
MOUNT
DCE/IG56
56KBPS
X
X
X
X
DCE/IG56S
56KBPS
x
x
X
x
DCE/1M56
56KBPS
X
X
X
DCE/IML56
56KBPS
X
DCE/MM56
56KBPS
SECURITY
x
WALL
MOUNT
PAGE X
75 X
76 X
77 X
X
PHOTO
78 X
79 74
DATA CONNECT ENTERPRISE
PHONE: 301.924.7400 EXT 17
3405 OLANDWOOD CT
FAX: 301.924.7403
OLNEY, MD 20832
USA
www.data-connect.com
INDUSTRIAL SOLUTIONS
NETWORK ANYWHERE
INDUSTRIAL MODEMS
IG56
75
DCE IG56
SPECIFICATIONS
The Data Connect DCE/IG56 high-speed V.92 dial-line modems are designed and manufactured for rugged industrial applications over the
Public designed Telephone Network (PSTN). The DCE/IG56 utilizes the
industries latest V.92 modem technology to deliver outstanding features, performance and reliability in one cost-effective solution.
The DCE/IG56 modems are ideally suited for industrial communication applications including SCADA systems, RTs, traffic monitor and
control, and industrial automation network. The DCE/IG56 supports
TRUs equipped with an EIA RS-232 or RS-485 serial port. Data communications speeds up to 56 kbps are supported.
The modems incorporate the latest data-compression and error correction standards for improved data transmission and reception over
marginal and poor-quality telephone lines.
The DCE/IG56 modems are powered by a wide range of AC and DC
power supply voltages. Its low power consumption and low stand-by
current technology design makes the DCE/IG56 ideal for batterypowered system as well as regular AC powered operation.
FEATURES
Worldwide operation Support: ITU-T - V.92 / V.34BIS / V.34 / V.32bis / V.32 /
V.22bis / V.22 / V.23 / V.23 / V.21
V29 Fast POS / V.22bis fast connect
Data Compression: V.44 / V.42bis/MNP 2
Error Correction: V.42/MNP 2/MNP 2
DTE/ Host Interface: EIA RS-232 and RS-485
Embedded AT Command set
63 embedded and upgradeable country profiles for worldwide homologation
NVRAM for configuration and country profile storage
Built-in remote diagnostic and configuration management
Heavy-duty surge protection provided at power supply and phone line interface
Support wide range of AC and DC power supply options
Supports DC power supplied from DTE or DB-9 connector
Wide range of operating temperatures
Optional mounting kits for DIN Rail mounting or wall mount
Data modem : ITU-T - V.92: Up to 56kbps /
V.34bis: Up to 33600bps / V.32bis: Up to 14400bps /
V.32: Up to 9600bps / V.22bis: Up to 2400 bps /
V.21: 0-300bps / Bell 212A: 1200bps / Bell 103: 0-300bps
Fax Modem: Send and receive fax up 14.4 kbps
V17, V29, V27ter, and V21 channel 2
EIA / TIA 578 Class 1, T.31 Class 1.0, and Class
Data Format: Asynchronous, 7, 8 or 9 data bits, parity, 10- or 11- bit
character with 1 0r 2 stop bits
Modulation: Fully compatible with ITU-T V.92 / V.34 / V.32bis /
V22bis / V.21
Bell 212A and Bell 103 compatible modes.
Transmission Line Interface: 2-wire full duplex over PSTN / Connector: RJ-11C
DTE/RTU Interface: the modem provides serial ports to support RS232 or RS-485 (selectable) interface
RS-232 Interface: Connector : DB9-F
Signals: RTS, CTS, CD, TD, RD, DTR, DSR, and RI
RS-485 Interface: Connector: RJ-11C
Signals: 4-wire full duplex or 2-wire half duplex TX+,TX-,RX+, and RXLED Indicators: DTR, TXD, RXD, DCD, DSR, and RI
Three models support various power options:
standalone - 90-264VAC / 100-400VDC / 10-48VDC
Idle mode: 65 mA@12V, 0.78 watts
Normal mode: 75 mA@12V, 0.9 watts, typical
Enclosure dimensions: 4.1”(W) x5.0”(L) x 1.3”(H)
104mm(W) x 127mm(L) x 33mm(H)
Weight: 0.5 pound, without AC power module
Operating Temperature: -40 to +85°C
Storage Temperature: -40 to +85°C
Humidity: up to 95% non-condensing
Dry Contact Detection (Optional):
Two optical isolated dry contact detections are provided for external
devices (consult factory for additional information)
ORDERING INFORMATION
DCE/IG56:
DCE/IG56SDC:
DCE/IG56S-HV
Standalone with security and AC Power Module 90
-264 VAC
Standalone with security and DC power 10-48
VDC
standalone with security and AC
Power module 90-264 VAC or 100-400 VDC
DCE/IG202T-DIN DCE/IG202T-WM
75
DATA CONNECT ENTERPRISE
PHONE: 301.924.7400 EXT 17
3405 OLANDWOOD CT
FAX: 301.924.7403
OLNEY, MD 20832
USA
www.data-connect.com
INDUSTRIAL SOLUTIONS
NETWORK ANYWHERE
INDUSTRIAL MODEMS
IG56S
76
DCE IG56S
SPECIFICATIONS
The Data Connect DCE/IG56S high-speed V.92 security dial-line modems are
designed and manufactured or rugged industrial application over the Public
Switched Telephone Network (PSTN) with security features such as password log-in and security call-back. The DCEIG56S utilizes the industries
latest V.92 modem technology to deliver outstanding features, performance,
and reliability in one cost-effective solution.
The DCE/IG56S modems are ideally suited for industrial communication
application including SCADA systems, RTs, traffic monitoring and control,
and industrial automation networks. The DCE/IG56S supports RTUs
equipped with an EIA RS-232 or RS-485 serial port. Data communications
speed up to 56 kbps are supported.
The modems incorporate the latest data-compression and errorcorrection standards for improved data transmission and reception over
marginal and poor-quality telephone lines. Multiple levels of security with
password verifications and security call back keep your valuable data secure from intruders.
The DCE/IG56S modems are powered by a wide range of AC and DC
power supply voltages. Its low power consumption and low stand-by current
technology design makes the DCE/IG56S ideal for a battery-powered system
as well as regular AC powered operations.
FEATURES
Worldwide Operation Support:
ITU-T: V.92 / V.34 / V.32bis / V.32 / V.22bis / V.22 / V.23 / V.22 / V.21
V29 Fast POS / V.22bis fast connect /V.44 / V.42bis / MNP 2
Security Options: Password log-in / Security call-back
DTE/Host Interface: EIA RS-232 & RS-485
Embedded AT command set
63 embedded and upgradeable country profiles for worldwide homologation
NVRAM for configuration and country profile storage Built-in remote diagnostics and configuration management
Heavy-duty surge protection provided at power supply and phone line interface
Supports wide range of AC & DC power supply options Support DC power
supplied from DTE or DB-9 connector Wide range of operating temperatures
Optional mounting kits for DIN Rail mounting or wall mount
ITU-T V.92: Up to 56kbps / V.34bis: Up to 33600bps /
V.34: Up to 28800bps / V.32bis: Up to 14400bps /
V.32: Up to 9600bps / V.22bis: Up to 2400bps
V.21: 0-300bps / Bell 212A: 1200bps / Bell 103:0-300bps
Send and receive fax up 14.4 kbps / V17 / V29 / V27ter / V21 channel 2 / EIA/TIA 578 Class 1 / T.31 Class 1.0 /
Data Format: Asynchronous, 7, 8 or 9 data bits, parity, 10- or 11bit character with 1 0r 2 stop bits
Modulation: Fully compatible with ITU-T V.92 / V.34 / V.32bis /
V22bis / V.21 / Bell 212A / Bell 103. Transmission Line Interface: 2-wire full duplex over PSTN Connector RJ-11C
DTE/RTU Interface: the modem provides serial ports to support RS
-232 or RS-485 (selectable) interface standards:
RS-232 Interface: Connector : DB9-F
Signals: RTS, CTS, CD, TD, RD, DTR, DSR, and RI
RS-485 Interface: Connector: RJ-11C
Signals: 4-wire full duplex or 2-wire half duplex
TX+,TX-,RX+, and RX- Front panel LED Indicators - DTR, TXD, RXD, DCD, DSR, and RI
Security Options: Password log-in / Security call-back
Three models support various power options:
standalone: 90-264VAC / 100-400VDC / 10-48VDC
Consumption Idle mode: 65 mA@12V, 0.78 watts
Consumption Normal mode: 75 mA@12V, 0.9 watts,
Enclosure dimensions: 4.1”(W) x5.0”(L) x 1.3”(H)
104mm(W) x 127mm(L) x 33mm(H)
Weight: 0.5 pound, without AC power module Operating Temperature: -40° to +85°C
Storage Temperature: -40°to +85°C
Humidity: up to 95% non-condensing
Dry Contact Detection (Optional): Two optical isolated dry contact
detections are provided for external devices (consult factory for
additional information)
ORDERING INFORMATION
DCE/IG56S - Standalone with security and AC power module 90-264
VAC
DCE/IG56SDC - Standalone with security and DC power 10-48 VDC
DCE/IG56S-HV - Standalone with security and AC power module 90264 VAC or 100-400 VDC
DCE/IG202-DIN - DIN rail kit
DCE/IG202-WMB – Wall mount bracket kit
76
DATA CONNECT ENTERPRISE
PHONE: 301.924.7400 EXT 17
3405 OLANDWOOD CT
FAX: 301.924.7403
OLNEY, MD 20832
USA
www.data-connect.com
INDUSTRIAL SOLUTIONS
NETWORK ANYWHERE
INDUSTRIAL MODEMS
IM56
77
DCE IM56
SPECIFICATIONS
To service the growing need for efficient, reliable data communication
in harsh environmental of utility substations and industrial facilities, has
developed a 56bps modem that can operate from various AC/DC power
supplies and survive high surge levels and extreme heat and cold. all this
without compromising the performance expected from state-of-the-art
communication devices
With the rapid move toward “intelligent” substations, where meters,
relay, RTU’s, SCADA systems, etc. are able to “talk” to a remote operator,
communication devices such as modems are moving off the desktop and
into the field, where the conveniences of 115VAC power outlets and climate control are usually hard to find.
The IM56 (low power industrial modem 56bps ) is an industrial grade
modem incorporating data compression and error detection techniques
for data throughput of up to 230kbps. The modem operates from -20˚C to
+65˚C with over 95% relative humidity. Modem configuration is accomplished through the “AT” command set.
Modem Line Speeds:
ITU-T V.90 - 56000bps
ITU-T V.34 - 33600bps
ITU-T V.32bis - 14400bps
ITU-T V.32 - 9600bps
ITU-T V.22bis - 2400bps
ITU-T V.21 - 300bps
Asynchronous Data:
ITU-T V.42 error correction MNP 2-4, MNP 10EC
ITU-T V.42bis data compression MNP5
Maximum Throughout: 230, 400bps
Fax Send/Receive speeds: 14400bps
Voice Capability
DES Encryption
Dial Back
Minimum System Requirements
RS232 Communication Port
Communications Software
Power Supply: 12-400VAC/DC
Temperature: -25˚C to +65˚C
Housing: Plastic case
Dimensions: 3.5” x 6” x 1”
Network Connections: PSTN via RJ11
Data Connections: RS232/V.24 via DB connector
Data Interface: RS232 via DB9F connector
USER CONFIGURABLE HARDWARE OPTIONS
FEATURES
Modem Interface Units AC/DC powered substation hardened communication interface units
5600kbps 2-wire dial-up line modem
12 to 400 AC/DC power supply
IEC801-4 surge protection
-20˚C to +65˚C operating temperature
For meters relays, SCADA, etc.
AT command set
ATS0=1 modem will answer on first ring
AT&D0 modem will ignore DTR- factory default
is AT which allows the modem to
answer only if DTR is high
AT&V
to check the state of the “S” register
use AT&V
AT&W0 Don’t forget to burn the new codes into
E-PROM by AT&W0
A good configuration for dumb mode operation is
AT&F&C1&D0E0Q1S0=1&w0
ORDERING INFORMATION
DCE/IM56
DCE/IM56DC-12
DCE/IM56DC-24
DCE/IM56DC-48
V.90 56k modem 100-240VAC
V.90 56k modem 12VDC
V.90 56k modem 24VDC
V.90 56k modem 48VD DCE/IM56-HV
V.90 56k modem 100-240VAC
85-400VDC
77
DATA CONNECT ENTERPRISE
PHONE: 301.924.7400 EXT 17
3405 OLANDWOOD CT
FAX: 301.924.7403
OLNEY, MD 20832
USA
www.data-connect.com
INDUSTRIAL SOLUTIONS
NETWORK ANYWHERE
INDUSTRIAL MODEMS
IML56
78
DCE IML56
To service the growing need for efficient, reliable data communication in harsh environments of utility substation and industrial facilities,
has developed a 56kbps modem that can operate from various AC/DC
power supplies and survive high surge levels and extreme heat and
cold. All this without compromising the performance expected from
state-of-the-art communication devices. With the rapid move toward
“intelligent” substations, where meters, relays, RTU’s, SCADA systems, etc. are able to “talk” to a remote operator, communications devices such as modems are moving off the desktop and into the field,
where the conveniences of 115VAC power outlets and climate control
are usually hard find.
The IML56 (low power industrial modem 56kbps) is an industrial
grade modem incorporated data compression and error detection techniques for data throughput of up to 230kbps. The modem operates from
-20 C to +65 C with over 95% relative humidity.
For most applications, the modem configuration can be set using
the DIP switch located on the right side of the unit without a PC. Typically no familiarity with “AT” command is expected.
FEATURES
Modem Interface Units AC/DC powered Substation hardened communication Interface units
5600kbps 2-Wire Leased Line modem
12 to 400 AC/DC power supply
IEC801-4 surge protection
-20 C to +65 C operation temperature
ORDERING INFORMATION
DCE/IML56
V.90 56K modem 100-240VAC
DCE/IML56DC-12 V.90 56K modem 12VDC
DCE/IML56DC-24 V.90 56K modem 24VDC
DCE/IML56DC-48 V.90 56K modem 48VDC
DCE/IML56-HV
V.90 56K modem 100-240VAC
85-400VDC
SPECIFICATIONS
Modem Line Speeds:
ITU-T V.90 - 56000bps
ITU-T V.34 - 33600bps
ITU-T V.32bis - 14400bps
ITU-T V.32 - 9600bps
ITU-T V.22bis - 2400bps
ITU-T V.21 - 300bps
Asynchronous Data:
ITU-T V.42 error correction
MNP 2-4, MNP 10EC
ITU-T V.42bis data compression, MNP5
Maximum Throughput - 230,400bps
Fax Send/ Receive Speeds - 14400bps (class 1&2)
Voice Capable
DES Encryption
Dial Back
Minimum System Requirements:
RS232 Communications Ports
Communications Software
Power Supply: 12-400VAC/DC
Temperature: -20 C to +65 C
Housing : Plastic casing
Dimensions: 3.5” x 6” x 1”
Network Connection: PSTN via RJ11
Data Connections: RS232/V.24 via DB9F connector
Data Interface: RS232 via DB9F connector
User Configurable Hardware Options:
Via DIP switch settings:
DTE Speed
Auto Answer
Local Echo Enable
Result Code Enable
Result Code Terse
Flow Control
Error Correction
Host DTR Normal
Deep Sleep
78
DATA CONNECT ENTERPRISE
PHONE: 301.924.7400 EXT 17
3405 OLANDWOOD CT
FAX: 301.924.7403
OLNEY, MD 20832
USA
www.data-connect.com
INDUSTRIAL SOLUTIONS
NETWORK ANYWHERE
INDUSTRIAL MODEMS
MM56
79
DCE MM56
SPECIFICATIONS
To service the growing need for efficient, reliable data communication in
harsh environmental of utility substations and industrial facilities, has developed a 56bps OEM modem that can operate from various AC/DC power
supplies and survive high surge levels and extreme heat and cold. all this
without compromising the performance expected from state-of-the-art communication devices
With the rapid move toward “intelligent” substations, where meters, relay, RTU’s, SCADA systems, etc. are able to “talk” to a remote operator,
communication devices such as OEM modems are moving off the desktop
and into the field, where the conveniences of 115VAC power outlets and
climate control are usually hard to find.
The DCE MM56 (Internal OEM industrial modem 56bps ) is an industrial
grade OEM modem incorporating data compression and error detection
techniques for data throughput of up to 230kbps. The modem operates from
-20˚C to +65˚C with over 95% relative humidity. Modem configuration is accomplished through the “AT” command set.
FEATURES
Modem Interface Units AC/DC powered substation hardened communication interface units
5600kbps 2-wire dial-up line modem
12 to 400 AC/DC power supply
IEC801-4 surge protection
-20˚C to +65˚C operating temperature
For meters relays, SCADA, etc.
ORDERING INFORMATION
DCE/MM56
V.90 56k OEM modem
Modem Line Speeds:
ITU-T V.90 - 56000bps
ITU-T V.34 - 33600bps
ITU-T V.32bis - 14400bps
ITU-T V.32 - 9600bps
ITU-T V.22bis - 2400bps
ITU-T V.21 - 300bps
Asynchronous Data:
ITU-T V.42 error correction MNP 2-4, MNP 10EC
ITU-T V.42bis data compression MNP5
Maximum Throughout: 230, 400bps
Fax Send/Receive speeds: 14400bps
Voice Capability
DES Encryption
Dial Back
Minimum System Requirements
RS232 Communication Port
Communications Software
Power Supply: 12-400VAC/DC
Temperature: -25˚C to +65˚C
Housing: Plastic case
Dimensions: 3.5” x 6” x 1”
Network Connections: PSTN via RJ11
Data Connections: RS232/V.24 via DB connector
Data Interface: RS232 via DB9F connector
USER CONFIGURABLE HARDWARE OPTIONS
AT command set
ATS0=1 modem will answer on first ring
AT&D0 modem will ignore DTR- factory default
is AT which allows the modem to
answer only if DTR is high
AT&V
to check the state of the “S” register
use AT&V
AT&W0 Don’t forget to burn the new codes into
E-PROM by AT&W0
A good configuration for dumb mode operation is
AT&F&C1&D0E0Q1S0=1&w0
79
DATA CONNECT ENTERPRISE
PHONE: 301.924.7400 EXT 17
3405 OLANDWOOD CT
FAX: 301.924.7403
OLNEY, MD 20832
USA
www.data-connect.com
INDUSTRIAL SOLUTIONS
NETWORK ANYWHERE
INDUSTRIAL MODEMS
V.34BIS MODEM CHECK LIST
80
V.34BIS MODEM CHECK LIST
MODEL
MAX.
SPEED
DIAL
LEASED
RACK
MOUNT
DCE/V3600UI
33.6KBPS
X
X
X
X
X
DCE/V3600LP+
33.6KBPS
X
X
X
X
DCE/IG336S
33.6KBPS
X
X
X
DCE/3342LP
33.6KBPS
X
X
X
X
DCE/IG336
33.6KBPS
X
X
X
DCE/3342E-004-2
33.6KBPS
X
X
X
DCE/3342R-004-2
33.6KBPS
X
DCE/3342E-208-4
33.6KBPS
HIGH VOLT. LOW VOLT.
X
X
X
X
X
WALL
DIN MOUNT SECUR-ITY MOUNT
PHOTO
PAGE
81
X
82
x
83
X
84
85
X
86
X
87
88
80
DATA CONNECT ENTERPRISE
PHONE: 301.924.7400 EXT 17
3405 OLANDWOOD CT
FAX: 301.924.7403
OLNEY, MD 20832
USA
www.data-connect.com
INDUSTRIAL SOLUTIONS
NETWORK ANYWHERE
INDUSTRIAL MODEMS
V.3600UI
81
DCE V3600UI
The Data Connect V.36UI series is a series of high performance,
synchronous and asynchronous, full-duplex, multi-standard standalone or rack mounted modem. They are designed for use on 2wire dial-up and 2/4-wire leased line circuits.
The Data Connect V.3600UI series is fully compliant with ITU-T
V.34 as well as being compatible with ITU-T recommended V.32bis/
V.32, V.22bis, V.23 and V.21 international standards while operating at 33600, 31200, 28800, 26400, 24000, 21600, 19200, 16800,
14400, 1200, 9600, 7200, 4800, 2400, 1200 and 300 bits per second.
In V.34 mode the Data Connect V.3600UI series provides full
duplex operation at up to 33.6Kbps on a 2/4-wire PSTN line, with
features like line probing, symbol rate, and carrier frequency automatic selection. a range of performance enhancing techniques are
available for V.34 mode, including adaptive pre-coding, adaptive re
-emphasis, non-linear encoding (warping), constellation expansion, multi dimensional trellis coding, transmission power back-off
(power drop), V.8 standard modem initialization, and shell mapping.
An in-band secondary channel allows the user to monitor and
control the remote site unit. The Data Connect V.3600UI series also
offers auto callback and leased-line security checks in addition to
dial-up security checks.
The Data Connect RM16MUI series can accommodate up to 16
modem cards with 16 ports, control unit and single or dual redundant power unit, it also dual redundant power supply which means
if one power does fail the other one is capable of powering the
entire rack.
FEATURES
Fully compatible with ITU-T V.34+/V.34/V.32bis/V.32/V.26bis/V.22bis/V.22/V.23/
V.21/V.24/V.28/V.25bis/V.54/V.52/V.42/V.42bis/V.14/V.13/V.8 and Bell 212A/103
19” rack accommodates up to 16 modem cards with hot-swap and profile copy
functions
Achiever throughput up to 115200bps V.13 simulated carrier in half-duplex
MNP4®, V.42 error correction
MNP5®, V.42bis data compression
Extended AT and ITU-R V.25bis command set
Leased lines dial back-up and restore in manual or auto mode
Auto fallback and fall forward
Remote configuration via secondary channel
Front panel lock and password protect
Password & callback security
Diagnostic capabilities:
Analog loopback and remote, digital loopback (with pattern or not); BERT test
pattern using 511
Auto manual dialing/answer
Front panel configuration via rubber switches and LCD
Front panel key reset function
G3FAX send/receive compatible with EIA-578 Class 1 FAX command (optional)
ORDERING INFORMATION
DEC/V3600UI
DCE/V3600UI-48
DCE/V3600UI-24
V3600UI STANDALONE 100-240VAC
V3600UI STANDALONE 48VDC
V3600UI STANDALONE 24VDC
SPECIFICATIONS
Compatibility:
V.34+: 33.6/31.2 Kbps SM (4D TCM)
V.34+: 28.8/ 26.4/24/21.6/19.2/16.8/14.4/12/9.6/7.2/
4. 8/2.4 Kbps SM (4D TCM)
V.32bis: 14400/12000/7200bps TCM
V.32: 9600bps TCM, 9600/4800 bps QAM
V.26bis: 2400/1200bps QAM, 1200bps BPSK
V.22/Bell 212A: 1200bps DPSK
V.23: 1200/75, 600/75bps FSK
V.21/Bell 103:300 bps FSK
Symbol Rate (Baud) and Carrier Frequency(Hz):
2400 Baud- 1600/ 1800 Hz
2800 Baud- 1680/ 1867 Hz
3000 Baud- 1800/2000 Hz
3200 Baud- 1829/ 1920 Hz
3429 Baud- 1959 Hz
Data Format:
Synchronous or Asynchronous
Total bit length: 8, 9, 10, and 11
Data Speed:
Asynchronous- 75/300/600/1200/2400/4800/7200/
12000/14400/168/19200/21600/2400/26400/28800/
31200/33600/38400/57600/76800/115200 bps
Synchronous- 1200/2400/4800/7200/9600/12000/
144400/16800/19200/21600/24000/26400/28800/
31200/33600 bps
DTE Interface: EIA RS-232C, ITU-T V.24/V.28
Line Requirement: Dial-up line, 2/4-wire leased line
Transmit Level:
Dial-up line: 0 to -15dBm; Leased line: 0 to -31dBm
Receive Dynamic Range: -4 to -43/ 0 to -33dBm
Equalization: Automatic adaptive EQ
Call Progress Monitoring:
Dial tone, Ring, Ring-back, Busy and backup dial
Line Status Monitoring:
TX level, RX level, S/N ratio, EQM value, delay, phase jitter, frequency offset, far-end
echo, DTE format, retrain count, TX baud rate, RX baud rate, TX carrier, RX carrier,
TX speed, RX speed, TX power back-off level, Interface lead monitoring .
Memory:
Non-volatile; 2user profiles and 10 phone numbers with 30 characters each
Line Interface: RJ-11 for dial-up, JM8 (like RJ45) for leased line
Transmit Clock: Internal, Loopback, or External
Dialing Command and Type:
Extended AT and V.25bis using Tone/Pulse/Mixed
Flow Control: RTS/CTS, XON/XOFF, CTS only
Enclosure dimensions: 7.1” W x 10.3”L x 1.9”H; 4.2 Ibs
Rack Mount dimensions: 18.9” W x 14.9”L x 8.7”H
Temperature: Operation: 0˚ to +50˚C,
Storage: 0˚ to +50˚C
Humidity: Up to 95% (non-condensing)
DCE/V3600UI-RM V3600UI RACKMOUNT MODEM
DCE/RM16MUI
16 SLOT CHASSIS 100-240VAC REDUNT. PWR
DCE/RM16M-48
16 SLOT CHASSIS 48VDC REDUNDANT PWR
81
DATA CONNECT ENTERPRISE
PHONE: 301.924.7400 EXT 17
3405 OLANDWOOD CT
FAX: 301.924.7403
OLNEY, MD 20832
USA
www.data-connect.com
INDUSTRIAL SOLUTIONS
NETWORK ANYWHERE
INDUSTRIAL MODEMS
LP+ SERIES
82
DCE LP+ SERIES
Remote access modem offer significant cost savings and reduce network downtimes by eliminating the need to dispatch personnel to remote
sites to reconfigure alarm and control systems, phone switches, diagnostic ports, remote access servers, and supervisory channels.
However, these benefits come with the risk that unauthorized access to
remote facilities could disrupt your network and cripple your business
operation with the Data Connect V.3600LP+ Series family of remote access modems, it is no longer necessary to accept the security risk associated with unprotected remote access installations. Data Connect ‘s
V.3600LP+ series provides the full range of advanced modem features
found in our series V.3600LP family, combined with a comprehensive set
of security and access control features. The V.300LP+ Series implements
the full range of security features defined in the Bellcore Local Access
and Requirements (LSSGR) in a cost effective industrial package.
If you are managing highly secure remote access points, The
V.3600LP+ series modems offer the most advanced security features
available. Now you can access remote configuration, diagnostic, console
ports, and supervisory and control channels over secure connections.
With the V.3600LP+ Series, password protection, the cornerstone of most
security strategies, can augment with a wide range of feature options.
These features can be used to implement the multi-faceted type of access
control recommended by most security experts. In addition, a comprehensive audit trial provides a historical view of access attempts, allowing
FEATURES
User ID/Password-Capable of storing as many as 400 passwords can be configured to
operate with or without a password prompt.
Retry Limits-Designed to foil the conventional trial and error approach to unauthorized
access.
Caller ID Verification-The Caller ID feature requires that caller’s telephone number
present in the modem’s database.
Non-registered numbers will not receive modem supervision.
Closed User Groups- Built in challenge response algorithms may be enabled to create
closed user groups of DCE security modem
Automatic Call Back-Is configured to initiate a call back to a users modem, insuring
that access is originated from known terminal or locations.
Password Aging –Insures that passwords are changed on a specified schedule.
Enforced Syntax- Implements password policies with regards to alpha, numeric and
control type characters
Audit Trial with Precision Time Keeping-With the audit trial facilities, there is never a
question about who has gained access or who has tried to gain access of your installation. All attempts to access a V.3600LP+ series device are stored in a nonvolatile audit
trail along with the date and time.
ORDERING INFORMATION
DCE/V3600LP+
DCE/3342LP+
SPECIFICATIONS
Remote Configuration- The remote configuration facilities of V.3600LP+
Series modem will allow you to remotely maintain passwords, review the
audit trial or modify any parameter of the device. Additional configuration
commands allow you to select DTE bit rate, character length and parity.
Remote configuration access may be restricted to specific passwords.
Device Management Software- This optional software automates audit trial
data collection and simplifies password management for large, distributed
networks.
Feature Overview
Standard 2-wire dial-up
AT Command Set
Standard Error Correction and compression
RS-232 Asynchronous DTE Support Remote Configuration
See LP Series datasheet for a complete description of modem capabilities
Data Compatibility– V.34bis, V.34, V.32bis, V.32, V.22bis, V.22, V.23, V.21,
Bell 212A, Bell 103j
DTE Interface- Physical- DB9 connector Electrical-RS-232F (V.24). Asynchronous: Auto baud or selectable formats and rates to 11.2Kbps with
V.32bis
Auto Dial Modes- Standard AT compatible dial commands or DTR dial of
stored number.
Answer Modes- Standard auto answer or manual answer under DTE control.
Error correction- V.42 and MNP 2-4 error correction
Data Compression- V.42bis and MNP5 data compression
Configuration Control- Standard AT commands for both local and remote
configuration
Diagnostic- V54 throughout AT commands
Network Interface- 2-wire, pulse or DTMF dial.
XMT level: -12dBm
RCV sensitivity: -43dBm
Power- Standalone units automatically adjust to 14-54VDC
Standard S1900 Rack mount unit automatically adjust to 85-265VAC, 27440Hz. Optional 48VDC supply.
Environmental- Operating temperature range:
-20˚C to 70˚C. Humidity: 90% non-condensing
Approvals- FCC part 68& part 15, class A
Optional: international approvals available
V3600 LOW PROFILE
V.34BIS LOW PROFILE
82
DATA CONNECT ENTERPRISE
PHONE: 301.924.7400 EXT 17
3405 OLANDWOOD CT
FAX: 301.924.7403
OLNEY, MD 20832
USA
www.data-connect.com
INDUSTRIAL SOLUTIONS
NETWORK ANYWHERE
INDUSTRIAL MODEMS
IG336S
83
DCE IG336S
The Data Connect DCE/IG336S high speed V.34bis security dial-line
modems are designed and manufactured for rugged industrial applications over the Public Switched Telephone Network (PSTN) with security
features such as password log-in and security call-back. The DCE/
IG336S utilizes the industries latest
V.34bis modem technology to deliver outstanding features, performance
and reliability in one cost-effective solution.
The DCE/IG336S modem are ideally suited for industrial communication applications including SCADA systems, RT’s, traffic monitor and
control, and industrial automation network. The DCE/IG336S supports
RTUs equipped with an EIA RS-232 or RS-485 serial port. Data communications speed up to 33.6 kbps are supported.
The modems incorporate the latest data-compression and errorcorrection standards for improved data transmission and reception over
marginal and poor-quality telephone lines. Multiple levels of security
with password verification and security call back keep your valuable
data secure from intruders.
The DCE/IG336S modems are powered by a wide range of AC and DC
power supply voltages. Its low consumption and low stand-by current
technology design makes the DCE/IG366S is ideal for battery-powered
system as well as regular AC powered operations.
FEATURES
Worldwide Operation Support:
-ITU-T V.34bis/V.34/V.32bis/V.32
-ITU-T V.22bis/V.22/V.23/V.23/V.21
-Bell 212A/Bell 103
-V29 Fast POS
-V.22bis fast connect
-V.44/V.42bis/MNP 2
-V.42/MNP 2/MNP 4
Security Options: Password Log-in & Security Call-back
DTE/ Host Interface - EIA RS-232 and RS-485
Embedded AT command set
Sixty-three embedded and upgradable country profiles for worldwide
homologation
NVRAM for configuration and country profile storage
Built-in remote diagnostics and configuration management Heavy-duty
surge protection provided at power
supply and phone line interface
Supports wide range of AC and DC power supply options
Supports DC power supplied from DTE or DB-9 connector
Wide range of operating temperatures
Optional mounting kits for DIN Rail mounting or wall mount
ORDERING INFORMATION
DCE/IG336S
DCE/IG336SDC
DCE/IG336S-HV
DCE/IG202T-DIN
Standalone with AC power module, 90-264VAC
Standalone, DC power, 10-48 VDC
Standalone with AC power module, 90-264VAC
or 100-400VDC
DCE EN2 Din Rail Kit
SPECIFICATIONS
Data Rate Support:
ITU-T V.34bis: Up to 33.6kbps
V.34: Up to 28800 bps
V.32bis/V.32: Up to 14400 bps
V.22bis: Up to 2400 bps
V.21: 0-300 bps
Bell 212A: 1200 bps
Bell 103: 0-300 bops
Fax modem:
Send and receive fax up to 14.4 kbps
V17, V29, V27ter, and V21 channel 2
EIA/TIA 578 Class 1, T.31 Class 1.0, and Class 2
Data Format:
Asynchronous, 7, 8 or 9 data bits, parity, 10- or 11-bits character with 1 or 2
stop bits
Modulation:
Fully compatible with ITU-T V.34bis/V.34/V.32bis/ V.22bis/V.21 Bell 212A and
Bell 103 compatible modes.
Transmission Line Interface
2-wire full duplex over PSTN
Connector: RJ-11C
DTE/RTU Interface
The modem provide serial ports to support RS-232 or RS-485 (selectable) interface standards:
RS-232 Interface
Connector: DB9-F
Signal: RTS, CTS CD, TD, RD, DT, DSR, RI
RS-485 Interface
Connector: RJ-11C
Signals: 4-wire full-duplex or 2-wire half-duplex
TX+, TX-, RX+, and RXFront Panel Indicators:
LED. Indicators - DTR, TXD, RXD, DCD, DSR, RI
Security Options
Password Log-in
Security call-back
Power Supply
Three models support various power options:
Standalone:
90-264VAC
Standalone
100-400VDC
Standalone
10-48 VDC
Power Consumption:
Idle mode:
65 mA@12V, 0.78 watts
Normal mode:
75 mA@12V, 0.9 watts typical
Mechanical
Enclosure dimensions:
4.1”(W) x 5.0”(L) x 1.3”(H)
104mm(W) x 127mm(L) x 33mm(H)
Weight: 0.5 pound, without AC power module
Operating Temperature: -40 C to + 85 C
Storage Temperature: -40 C to + 85 C
Humidity: Up to 95% non-condensing
Dry Contact Detection (optional)
Two optical isolated dry contact detections are provided for external devices
(consult factory for additional information).
83
DATA CONNECT ENTERPRISE
PHONE: 301.924.7400 EXT 17
3405 OLANDWOOD CT
FAX: 301.924.7403
OLNEY, MD 20832
USA
www.data-connect.com
INDUSTRIAL SOLUTIONS
NETWORK ANYWHERE
INDUSTRIAL MODEMS
LP SERIES
84
DCE LP SERIES
SPECIFICATIONS
For industrial networks, data centers and remote management application that require high-speed connections, the Data Connect
V.3600LP family of wire line data modems incorporates the latest advances in modem design to deliver efficient and reliable performance
that is packaged for industrial and commercial applications. V.3600LP
series modems offer superior price/performance and robust features
set that will meet or exceed your communications needs. UNIVERSAL
WIRELESS CONFIGURATION
Complex network configuration often incorporate a variety of data
set interfaces, each requiring separate modem types. The result has
been a requirement to stock seldom used parts, often in significant
quantity. Now, the DCE V.3600LP series offers an all-in-one solution
for a wide range of applications. Packaged in either a polymer or metal
case, and backed by a five year warranty, the V.3600LP series is capable of operating in either 2 or 4 wire configurations on dial up, leased
line, or short haul networks. Protocol support includes V.34, V.32,
V.32bis as well as Bell 212A and 103j.
With its standard power saving standby mode and instantaneous
(zero character loss) recovery, the V.3600LP series reduces stocking
and spares cost while providing additional project flexibility. V.3600LP
series modems have been developed to meet the strident environmental and performance demands of the commercial and industrial
applications.
Every component, switch and connector is selected for its ability to
withstand industrial environmental demands. V.3600LP series models
may be housed in optional metal enclosures and are built to meet the
most stringent criteria. Temperature ratings, for stringent example,
range from -20 C to +70˚C. Versatile power supply options will satisfy
any industrial application. Available in commercial and industrial
standalone configurations
Compatibility– V.34bis, V.34, V.32bis, V.32, V.22bis, V.22, V.23, V.21, Bell
212A, and Bell 103j
DTE Interface- Physical- DB9 connector Electrical-RS-232F (V.24).
Asynchronous: Auto baud or selectable format and rates to 115.2Kbps
with V.34 or 57.6 Kbps with V.32bis.
Auto Dial Modes- Standard AT compatible dials command or DTR dial
of stored number.
Answer Modes – standard auto answer or manual answer under DTE
control.
Error Correction- V.42 and MNP 2-4 error correction
Data Compression- V.42bis and MNP5 data compression
Configuration Control- Standard AT commands for both local and remote configuration
Diagnostic- V.54 through AT commands
Network Interface:
Dial-up: 2-wire pulse or DTMF XMT level:
12dBm RCV sensitivity: -43dBm
2-wire and 4-wire Leased and short –haul
XMT level: Adjustable RCV sensitivity : -43dBM
Power: standalone units automatically adjust to 7-14VDC unregulated,
or regulated 5VDC ± 5% (ripple <100mv)
Optional 48VDC supply
115VAC->9VDC Wall Transformer included with all standalone configurations.
Power Consumption
Operational Mode- 85mA@12VDC
Standby Mode -38mA@12VDC
Standby to Operational Transition TimeNearly instantaneous- will detect first character or ring.
Operating temperature range: -20˚C to 70˚C
Humidity: 90% non-condensing
Approvals- FCC Part 68& Part 15, Class A
Optional: International approvals available.
Commercial Standalone Dimensions: 5.3”L x 5.05”W x 1.53”H.
Weight: 12oz
ORDERING INFORMATION
DCE/3600LP
DCE/3342LP
FEATURES
V3600 LOW PROFILE
V34BIS LOW PROFILE
All In One DesignOne Model to support
2-wire and 4-wire operation
Leased Line,
Dial-up, short haul V.34, V.32, V.32bis
Standard Error Correction and compression AT command set
Polymer or Metal Case
84
DATA CONNECT ENTERPRISE
PHONE: 301.924.7400 EXT 17
3405 OLANDWOOD CT
FAX: 301.924.7403
OLNEY, MD 20832
USA
www.data-connect.com
INDUSTRIAL SOLUTIONS
NETWORK ANYWHERE
INDUSTRIAL MODEMS
IG336
85
DCE IG336
The Data Connect DCE/IG336 high speed V.34bis dial-line modems are designed and manufactured for rugged industrial applications over the Public Switched Telephone Network (PSTN). The DCE/
IG336 utilizes the industries latest V.34bis modem technology to
deliver outstanding features, performance, and reliability in one costeffective solution.
The DCE/IG336 modems are ideally suited for industrial communication applications including SCADA systems, RTUs, traffic monitor
and control, and industrial automation networks. The DCE/IG336
supports RTUS equipped with an EIA RS-232 or RS serial port. Data
communication speeds up to 33.6 kbps are supported.
The modems incorporate the latest data compression and errorcorrection standards for improved data transmission and reception
over marginal and poor-quality telephone lines.
The DCE/IG336 modems are powered by a wide range of AC and
DC power supply voltages. Its low power consumption and low stand
-by current technology design makes the DCE/IG336 ideal for batterypowered systems as well as regular AC powered operations.
FEATURES
Worldwide Operation Support:
-ITU-T V.34bis/V.34/V.32bis/V.32
-V.22bis/V.22/V.23/V23/V.21
-Bell 212A/Bell 103
-V29 Fast POS
-V.22bis fast connect
Data Compression: V.44/V.42bis/MNP2
Error Correction: V.42/MNP 2/MNP 4
DTE/ Host Interface: EIA RS-232 and RS-485
Embedded AT command set
Sixty-three embedded and upgradeable country profiles for worldwide homologation
NVRAM for configuration and country profile storage
Built-in remote diagnostics and configuration management Heavyduty surge protection provided at power supply phone line interface
Supports wide range of AC & DC power supply options
Supports DC power supplied from DTE or DB-9 connectors
Wide range of operating temperatures
Optional mounting kits for DIN Rail mounting or wall mount
ORDERING INFORMATION
DCE/IG336
DCE/IG336DC
DCE/IG336-HV
DCE/IG202T-DIN
Standalone with AC power module 90-264VAC
Standalone, DC power, 10-48 VDC
Standalone with AC power module, 90-264VAC
or 100-400VDC
DCE EN2 Din Rail Kit
SPECIFICATIONS
Data Rate Support:
ITU-T V.34bis: Up to 33.6kbps
V.34: Up to 28800 bps
V.32bis/V.32: Up to 14400 bps
V.22bis: Up to 2400 bps
V.21: 0-300 bps
Bell 212A: 1200 bps
Bell 103: 0-300 bops
Fax modem:
Send and receive fax up to 14.4 kbps
V17, V29, V27ter, and V21 channel 2
EIA/TIA 578 Class 1, T.31 Class 1.0, and Class 2
Data Format:
Asynchronous, 7, 8 or 9 data bits, parity, 10- or 11-bits character with 1 or 2 stop bits
Modulation:
Fully compatible with ITU-T V.34bis/V.34/V.32bis/ V.22bis/V.21 Bell 212A and Bell 103
compatible modes.
Transmission Line Interface
2-wire full duplex over PSTN
Connector: RJ-11C
DTE/RTU Interface
The modem provide serial ports to support RS-232 or RS-485 (selectable) interface
standards:
RS-232 Interface
Connector: DB9-F
Signal: RTS, CTS CD, TD, RD, DT, DSR, RI
RS-485 Interface
Connector: RJ-11C
Signals: 4-wire full-duplex or 2-wire half-duplex
TX+, TX-, RX+, and RXFront Panel Indicators:
LED. Indicators - DTR, TXD, RXD, DCD, DSR, RI
Security Options
Password Log-in
Security call-back
Power Supply
Three models support various power options:
Standalone:
90-264VAC
Standalone 100-400VDC
Standalone 10-48 VDC
Power Consumption:
Idle mode: 65 mA@12V, 0.78 watts
Normal mode:
75 mA@12V, 0.9 watts typical
Mechanical
Enclosure dimensions:
4.1”(W) x 5.0”(L) x 1.3”(H)
104mm(W) x 127mm(L) x 33mm(H)
Weight: 0.5 pound, without AC power module
Operating Temperature: -40 C to + 85 C
Storage Temperature: -40 C to + 85 C
Humidity: Up to 95% non-condensing
Dry Contact Detection (optional)
Two optical isolated dry contact detections are provided for external devices (consult
factory for additional information).
85
DATA CONNECT ENTERPRISE
PHONE: 301.924.7400 EXT 17
3405 OLANDWOOD CT
FAX: 301.924.7403
OLNEY, MD 20832
USA
www.data-connect.com
INDUSTRIAL SOLUTIONS
NETWORK ANYWHERE
INDUSTRIAL MODEMS
3342E-004-2
86
DCE 3342E-004-2
SPECIFCATIONS
Compatibility:
For data center and remote network applications that require low-speed
connections, the Data Connect ST3342E-004-2 commercial modem incorporate the latest advances in modem design to deliver efficient and reliable
performance
The Data Connect ST3342E-004-2 commercial modem has been developed to meet the most stringent environmental and performance demands
of the commercial and industrial application. Every relay, transformer, capacitor, switch and connector is selected for its ability to withstand industrial environmental demands.
At connect speeds of 33600bps and below, our patented Quick Connect
features reduce modem connect time by as much as 50%.
The Data Connect ST3342E-004-2 commercial modem is available in commercial single port standalone configurations. Rack mount configurations
are also available.
FEATURES
Standard 2-wire Dial-up
2-wire leased line or short haul operation
AT command set
Standard error correction and compression
RS232 & RS485 terminal interface
Asynchronous and Synchronous DTE support
Exclusive quick connect
V.34bis, V.34, V.32bis, V.32, V.22bis, V.22, Bell
212A, Bell 103J
DTE Interface:
RS232C (V.24), Synchronous or AsynchronousAuto baud or selectable formats and rates to
155.2kbps.Industrial model includes RS485
Auto Dial modes: Standard AT compatible dial
commands or DTR dial or stored
number
Answer modes:
Standard auto answer or manual
answer under DTE control
Error Correction: V.42 and MNP 2-4 error correction.
Data Compression: V.42bis and MNP5 data a
compression
Configuration Control: Standard AT commands for both
local and remote configurations.
Diagnostic:
V.54 through AT command
Network Interface: Dial-up 2-wire Pulse or DTMF
XMT level—12dBm
RCV sensitivity—43dBm
2-wire leased and short-haul
XMT level – adjustable
RCV sensitivity –43dBm
Power:
Standalone single port standard unit
automatically adjust to 9VAC or
9-14VDC
Power Supply Options: 5.5-14VDC, 18-75VDC,
66-160VDC
Rack-mount:
Standard CC-2016 rack automatically
adjusts to 85-265VAC, 27-440Hz.
Optional DC supply automatically
adjusts to positive or negative 3675VDC
Environmental:
Commercial Unit- Operating temperature range
20˚C to +70˚C
Humidity- 90% non-condensing.
Approvals:
FCC Part 68 & Part 15, class A
Optional International approvals are available
Physical:
Commercial UnitDimensions
5.30”L X 5.05”W 1.53”H
Weight -12oz.
Rack-mount unit- Fits CC-2016 rack
4.73”L x 4.60”W x 80”H
ORDERING INFORMATION
DCE/3342E-004-2 33.6Kbps 2-Wire Dial or Leased Line Modem
86
DATA CONNECT ENTERPRISE
PHONE: 301.924.7400 EXT 17
3405 OLANDWOOD CT
FAX: 301.924.7403
OLNEY, MD 20832
USA
www.data-connect.com
INDUSTRIAL SOLUTIONS
NETWORK ANYWHERE
INDUSTRIAL MODEMS
3342R-004-2
87
DCE 3342R-004-2
SPECIFCATIONS
Compatibility:
For data center and remote network applications that require low-speed
connections, the Data Connect ST3342R-004-2 commercial rackmount
modem incorporate the latest advances in modem design to deliver efficient and reliable performance
The Data Connect ST3342E-004-2 commercial modem has been developed to meet the most stringent environmental and performance demands of the commercial and industrial application. Every relay, transformer, capacitor, switch and connector is selected for its ability to withstand industrial environmental demands.
At connect speeds of 33600bps and below, our patented Quick Connect features reduce modem connect time by as much as 50%.
The Data Connect ST3342E-004-2 commercial modem is available in
commercial single port standalone configurations. Rack mount configurations are also available.
FEATURES
Standard 2-wire Dial-up
2-wire leased line or short haul operation
AT command set
Standard error correction and compression
RS232 & RS485 terminal interface
Asynchronous and Synchronous DTE support
Exclusive quick connect
V.34bis, V.34, V.32bis, V.32, V.22bis, V.22, Bell
212A, Bell 103J
DTE Interface:
RS232C (V.24), Synchronous or AsynchronousAuto baud or selectable formats and rates to
155.2kbps.Industrial model includes RS485
Auto Dial modes: Standard AT compatible dial
commands or DTR dial or stored
number
Answer modes:
Standard auto answer or manual
answer under DTE control
Error Correction: V.42 and MNP 2-4 error correction.
Data Compression: V.42bis and MNP5 data a
compression
Configuration Control: Standard AT commands for both
local and remote configurations.
Diagnostic:
V.54 through AT command
Network Interface: Dial-up 2-wire Pulse or DTMF
XMT level—12dBm
RCV sensitivity—43dBm
2-wire and 4-wire leased and short-haul
XMT level – adjustable
RCV sensitivity –43dBm
Power:
Standalone single port standard unit
automatically adjust to 9VAC or
9-14VDC
Power Supply Options: 5.5-14VDC, 18-75VDC,
66-160VDC
Rack-mount:
Standard CC-2016 rack automatically
adjusts to 85-265VAC, 27-440Hz.
Optional DC supply automatically
adjusts to positive or negative 3675VDC
Environmental:
Commercial Unit- Operating temperature range
20˚C to +70˚C
Humidity- 90% non-condensing.
Approvals:
FCC Part 68 & Part 15, class A
Optional International approvals are available
Physical:
Commercial UnitDimensions
5.30”L X 5.05”W 1.53”H
Weight -12oz.
Rack-mount unit- Fits CC-2016 rack
4.73”L x 4.60”W x 80”H
ORDERING INFORMATION
DCE/3342R-004-2 33.6Kbps 2-Wire Dial or Leased Line Rackmount
Modem
87
DATA CONNECT ENTERPRISE
PHONE: 301.924.7400 EXT 17
3405 OLANDWOOD CT
FAX: 301.924.7403
OLNEY, MD 20832
USA
www.data-connect.com
INDUSTRIAL SOLUTIONS
NETWORK ANYWHERE
INDUSTRIAL MODEMS
3342E-208-4
88
DCE 3342E-208-4
SPECIFCATIONS
Compatibility:
For data center and remote network applications that require low-speed
connections, the Data Connect ST3342E-004-2 commercial modem incorporate the latest advances in modem design to deliver efficient and
reliable performance
The Data Connect ST3342E-004-2 commercial modem has been developed to meet the most stringent environmental and performance demands of the commercial and industrial application. Every relay, transformer, capacitor, switch and connector is selected for its ability to withstand industrial environmental demands.
At connect speeds of 33600bps and below, our patented Quick Connect features reduce modem connect time by as much as 50%.
The Data Connect ST3342E-004-2 commercial modem is available in
commercial single port standalone configurations. Rack mount configurations are also available.
FEATURES
Standard 2-wire Dial-up
2-wire and 4-wire leased line or short haul operation
AT command set
Standard error correction and compression
RS232 & RS485 terminal interface
Asynchronous and Synchronous DTE support
Exclusive quick connect
V.34bis, V.34, V.32bis, V.32, V.22bis, V.22, Bell
212A, Bell 103J
DTE Interface:
RS232C (V.24), Synchronous or AsynchronousAuto baud or selectable formats and rates to
155.2kbps.Industrial model includes RS485
Auto Dial modes: Standard AT compatible dial
commands or DTR dial or stored
number
Answer modes:
Standard auto answer or manual
answer under DTE control
Error Correction: V.42 and MNP 2-4 error correction.
Data Compression: V.42bis and MNP5 data a
compression
Configuration Control: Standard AT commands for both
local and remote configurations.
Diagnostic:
V.54 through AT command
Network Interface: Dial-up 2-wire Pulse or DTMF
XMT level—12dBm
RCV sensitivity—43dBm
2-wire and 4-wire leased and short-haul
XMT level – adjustable
RCV sensitivity –43dBm
Power:
Standalone single port standard unit
automatically adjust to 9VAC or
9-14VDC
Power Supply Options: 5.5-14VDC, 18-75VDC,
66-160VDC
Rack-mount:
Standard CC-2016 rack automatically
adjusts to 85-265VAC, 27-440Hz.
Optional DC supply automatically
adjusts to positive or negative 3675VDC
Environmental:
Commercial Unit- Operating temperature range
20˚C to +70˚C
Humidity- 90% non-condensing.
Approvals:
FCC Part 68 & Part 15, class A
Optional International approvals are available
Physical:
Commercial UnitDimensions
5.30”L X 5.05”W 1.53”H
Weight -12oz.
Rack-mount unit- Fits CC-2016 rack
4.73”L x 4.60”W x 80”H
ORDERING INFORMATION
DCE/3342R-004-2 33.6Kbps 2-Wire Dial or 2/4-Wire Leased Line Rackmount Modem
88
DATA CONNECT ENTERPRISE
PHONE: 301.924.7400 EXT 17
3405 OLANDWOOD CT
FAX: 301.924.7403
OLNEY, MD 20832
USA
www.data-connect.com
INDUSTRIAL SOLUTIONS
NETWORK ANYWHERE
INDUSTRIAL MODEMS
MAIN MODEM CHART
89
NOTES:
89
DATA CONNECT ENTERPRISE
PHONE: 301.924.7400 EXT 17
3405 OLANDWOOD CT
FAX: 301.924.7403
OLNEY, MD 20832
USA
www.data-connect.com
INDUSTRIAL SOLUTIONS
NETWORK ANYWHERE
INDUSTRIAL MODEMS
V.34 MODEM CHECK LIST
90
V.34 MODEM CHECK LIST
MODEL
MAX.
SPEED
HIGH LOW
RACK
DIN SECUR- WALL
VOLT. VOLT. DIAL LEASED MOUNT MOUNT ITY MOUNT
DCE/MIU28.8
28.8KBPS
X
91 DCE/MIUPP28.8
28.8KBPS
X
92 DCE/MD28.8
28.8KBPS
X
DCE/PE28.8
28.8KBPS
X
X
PHOTO
PAGE 93 95 90
DATA CONNECT ENTERPRISE
PHONE: 301.924.7400 EXT 17
3405 OLANDWOOD CT
FAX: 301.924.7403
OLNEY, MD 20832
USA
www.data-connect.com
INDUSTRIAL SOLUTIONS
NETWORK ANYWHERE
INDUSTRIAL MODEMS
MIU28.8
91
DCE MIU28.8
FEATURES
To service the growing need for efficient, reliable data communication in a harsh environmental of utility substations and industrial facilities, has developed a 28800bps modem that can operate from various
AC/DC power supplies and survive high surge levels and extreme heat
and cold. All this without compromising the performance expected
from state-of-the-art communications devices.
With the rapid move toward “intelligent” substation, where meters
relays, RTU’s, SCADA system, etc are able to “talk” to a remote operator, communication devices such as modems moving off the desktop
and into the field, where the convenience of 115VAC power outlets and
climate control are usually hard to find.
Data Connect Enterprise has addressed this problem by developing
the MIU28.8 series modem designed specifically for harsh environments.
The MIU28.8 series modem is highly sophisticated full duplex, V.34
data modem that designed to interface with RS232, RS485 (external
device), 5V logic (TTL) or simple send and receive signals The Miu28.8
series modem operates on a dial-up system.
The MIU28.8 series modem is powered from unique power supply
that enables it to operate on any AC or DC voltage ranging from 48V to
240V. A low voltage version (9-36VDC) is also available. The MIU28.8
modem is designed to work in temperatures from 40˚C to 85˚C and is
surge protected on both the power and analog lines.
The MIU28.8 series modem is bundled in a 5-3/8” x 1-3/8” nonmetallic enclosure, suitable for desktop or wall mounting.
Also see our Data sheets on the MIU/power-port low voltage modems, the “Myriad” Rack Mount Modem, MIU (Bell), MIU14.4 and
MIU9.6FPD modems
ORDERING INFORMATION
DCE/MIU-28.8
DCE/MIU-28.8LV
V.34 28.8Kbps2-Wire Dial Modem
V.34 28.8Kbps2-Wire Dial Modem Low Voltage
Modem Interface Units AC/DC Powered
Substation Hardened Communication Interface Units
28.8kbps 2-wire Dial Modem
48 to 220 AC/DC Power Supply
IEC801-4 Surge Protection
-40˚C to +85˚C Operating Temperature
For Meters, Relay, SCADA etc.
SPECIFICATIONS
Modem Line Speeds:
Asynchronous 28800, 14400, 9600, 4800, 1200, 300bps
DTE Rates: Above modem line speeds (IE; with data compression)
115.2, 57.6, 38.4 19.2kbps
Standards: V.34, V.32bis, V.32, V.22bis, V.22, Bell 212A, and Bell 103
Transmission Line:
Dial
Compatibility: Hayes Extended AT command set
Power Supply: 48VAC/DC to 220VAC/DC
(Optional 9-36VDC)
Power Connector: 4-ft AC Cord with 3-pin screw
terminal connector included
Case size:
5-3/8” x 4” x 1-3/8”
Digital Port:
RS232 withDB9 connector
Analog Port:
RJ11 Modular Jack
Surge Protection: (power line) 8kV [exceeds IEC801-4] (20kV {IE801-5}
available if required)
Surge Protection:
3.75VAC
Environment:
-40˚C to +85˚C, 0 to 95% humidity
(non-condensing)
Certifications:
FCC Part 68, Industry Canada
91
DATA CONNECT ENTERPRISE
PHONE: 301.924.7400 EXT 17
3405 OLANDWOOD CT
FAX: 301.924.7403
OLNEY, MD 20832
USA
www.data-connect.com
INDUSTRIAL SOLUTIONS
NETWORK ANYWHERE
INDUSTRIAL MODEMS
MIU-PP288
92
DCE MIU-PP288
FEATURES
To service the growing need for efficient, reliable data communication in a harsh environmental of utility substations and industrial
facilities, has developed a 28800bps modem that can operate from
various AC/DC power supplies and survive high surge levels and
extreme heat and cold. All this without compromising the performance expected from state-of-the-art communications devices.
With the rapid move toward “intelligent” substation, where meters
relays, RTU’s, SCADA system, etc are able to “talk” to a remote operator, communication devices such as modems moving off the
desktop and into the field, where the convenience of 115VAC power
outlets and climate control are usually hard to find.
Data Connect Enterprise has addressed this problem by developing the PowerPort-MIU28.8 series modem designed specifically for
harsh environments.
The PowerPort-MIU28.8 series modem is highly sophisticated full
duplex, V.34 data modem that designed to interface with RS232,
RS485 (external device), 5V logic (TTL) or simple send and receive
signals The PowerPortMiu28.8 series modem operates on a dial-up
system.
The PowerPort-MIU28.8 series modem is powered from unique
power supply that enables it to operate on any AC or DC voltage
ranging from 48V to 240V. A low voltage version (9-36VDC) is also
available. The PowerPortMIU28.8 modem is designed to work in temperatures from 40˚C to 85˚C and is surge protected on both the
power and analog lines.
The PowerPort-MIU28.8 series modem is bundled in a 5-3/8” x 13/8” non-metallic enclosure, suitable for desktop or wall mounting.
Also see our Data sheets on the MIU/power-port low voltage modems, the “Myriad” Rack Mount Modem, MIU202T (Bell), MIU9.6FPD,
MIU14.4, and MIU28.8 modems.
ORDERING INFORMATION
DCE/MIU-PP288
thru DB25
V.34 28.8Kbps2-Wire Dial Modem with 5VDC Power
Modem Interface Units AC/DC Powered
Substation Hardened Communication Interface Units
28.8kbps 2-wire Dial Modem
Powered through the RS232 (DB25) data interface port or External
Jack
(Optional 7-16VDC available)
Automatic “Power Down” when inactive
IEC801-4 Surge Protection
-40˚C to +85˚C Operating Temperature
Hayes AT compatible
SPECIFICATIONS
Modem Line Speeds:
Asynchronous 28800, 14400, 9600, 4800, 1200, 300bps
DTE Rates: Above modem line speeds (IE; with data compression)
115.2, 57.6, 38.4 19.2kbps
Standards: V.34, V.32bis, V.32, V.22bis, V.22, Bell 212A, and Bell 103
Transmission Line:
Dial
Compatibility: Hayes Extended AT command set
Powered through the RS232 (DB25) data
interface port or external jack (optional 7-16VDC
available)
Case size:
5-3/8” x 4” x 1-3/8”
Digital Port:
RS232 withDB9 connector
Analog Port:
RJ11 Modular Jack
Surge Protection: (power line) 8kV [exceeds IEC801-4] (20kV {IE801-5}
available if required)
Surge Protection:
3.75VAC
Environment:
-40˚C to +85˚C, 0 to 95% humidity
(non-condensing)
Certifications:
FCC Part 68, Industry Canada
92
DATA CONNECT ENTERPRISE
PHONE: 301.924.7400 EXT 17
3405 OLANDWOOD CT
FAX: 301.924.7403
OLNEY, MD 20832
USA
www.data-connect.com
INDUSTRIAL SOLUTIONS
NETWORK ANYWHERE
INDUSTRIAL MODEMS
MD288
93
DCE MD288
FEATURES
28.8kbps 2-wire Dial Line Modem
IEC801-4 Surge Protection
-20˚C to +85˚C Operating Temperature
For Meters, Relays, SCADA, etc.
MD228 SPECIFICATIONS
Modem Line Speeds
Asynchronous 28800, 14000,
9600, 4800, 2400, 1200,
300bps
DTE Rate
The Data Connect MD28.8 is the Rack-mount version of the Data
Connect MIU28. The same functionally that can be found in the
MIU28.8 can be found in the MD14.4L.
The Data Connect MD28.8 is a Bell V.32bis modem designed for
asynchronous operation at 0 to 144400bps over voice grade lines.
The modem is intended for use on 2-wire or 4-wire leased lines.
The MD28.8 is comprised of MDMC carrier card and PE14.4
module. Up to 18 MD28.8 can be front loaded into MDR Modem
Bank.
The MDR Modem Bank is an industrial grade 19” X 3U rack
mountable chassis. MDR Modem Bank is powered from a wide
range of AC and DC voltages. Two power supply cards can be
installed to provide automatic back up in the event the primary
power supply fails. The MDR will operate in temperatures from 20˚C to + 85˚C and is surge protected on both power analog lines.
Two power supply slots are provided. Power supply cards are
available for any voltage in the range 9-150VDC and 9-275VAC. A
single power supply card will power all 18 MD28.8. In additional to
the MD28.8 the MDR Modem Bank also houses the MD14.4L,
MD14.4, MD9.6FPD, and MD202T.
Above modem line speeds (IE;
with data compression
115.2, 57.6, 38.4, 19.2kbps
Standards
V.34, V.32bis, V.32, V.22bis,
V.22, Bell 212A, Bell 103
Transmission Line
2-wire dial
Compatibility
Hayes Extended AT Command Set
Digital Port
RS232 with DB9 Connector
Analog Port
RJ11Modular Jack
Surge Protection
(Power Line) 8kV [Exceeds
IEC801-4] (20kV {IE801-5}
(available if required)
Surge Protection
3.75VAC
Environment
-40˚C to + 85˚C, 0 to 95%
humidity (non-condensing)
Certifications
FCC Part 68, Industry Canada
ORDERING INFORMATION
DCE/MD288
V.34 28.8Kbps2-Wire Dial Rackmount Modem
93
DATA CONNECT ENTERPRISE
PHONE: 301.924.7400 EXT 17
3405 OLANDWOOD CT
FAX: 301.924.7403
OLNEY, MD 20832
USA
www.data-connect.com
INDUSTRIAL SOLUTIONS
NETWORK ANYWHERE
INDUSTRIAL MODEMS
MDR
94
DCE MDR
FEATURES
18 Modem Slots
Dial & Leased Line Modems
V.22, 202T, 9.6FPD, V.32bis, V.34
Hayes AT Compatibility
Full Array of LEDs
Standard 19” x 5.25” (3U) Euro-Chassis
AC or DC Power from 9 to 300VAC or VDC
Dual Power Supplies with Full Redundancy
Ideal for SCADA Master Stations
SPECIFICATIONS
The Data Connect MDR Modem Chassis is designed to house
eighteen (18) DCE MD Modem Cards and two (2) DCE MDP Power
Supplies. The DCE MDR Modem Chassis is hardened industrial
grade, 19” wide, 3U height (5.25”H), and constructed heavy gauge
steel with plating for corrosion resistance.
The DCE MD Modem Cards are comprised of a DCE MDMC Modem
Carrier Card and a DCE PE OEM Card. The DCE MD202T (Bell 202T),
MD9.6FPD (Proprietary), MD2.4 (V.22), MD14.4 (V.32bis), MD14.4L
(V.32bis), and MD28.8 (V.34) operate within the DCE MDR Modem
Chassis and are hot-swappable. Any mix of the DCE MD modems
can be utilized simultaneously.
Two (2) DCE MDP Power Supplies Cards provide full redundancy
and are available for any voltage in the range of 9-150VDC and 9275VAC. A single DCE MDP Power Supply Card powers eighteen
(18) Modem Cards. A second DCE MDP Power Supply Card, if installed, provides automatic backup in the event of a failure of the
primary DCE MDP Power Supply Card.
EIA Standards
Compliant with EIA Standard EIA-310-C
Modem Interface Connectors (Rear)
Serial RS232: DB25F
Analog Port: RJ11
LEDs (Front)
(Top to bottom)
DTR: Data Terminal Ready
TXD: Transmit Data
RXD: Receive Data
MR: Modem Ready
CD: Carrier Detect
RTS: Request to Send
CTS: Clear to Send
RI: Ring Indicator
Power Requirements
AC Power: 9 to275VAC – Fused Socket (IEC 320)
DC Power: 9 to 150VDC – Screw Terminals – 9 to 150VDC
Dimensions
Width: 19”
Depth:
Height: 5.25” (3U)
Environmental
Operating Temperature: -20 to +85 Degrees Celsius
94
DATA CONNECT ENTERPRISE
PHONE: 301.924.7400 EXT 17
3405 OLANDWOOD CT
FAX: 301.924.7403
OLNEY, MD 20832
USA
www.data-connect.com
INDUSTRIAL SOLUTIONS
NETWORK ANYWHERE
INDUSTRIAL MODEMS
PE28.8
95
DCE PE28.8
FEATURES
Modem Interface Units 5V logic (TTL)
Simple send and receive signals
2400kbps 2-wire dial-up line modem
5V logic (TTL) power supply
IEC801-4 surge protection
-40°C to +85°C operating temperature
To service the growing need for efficient, reliable data communication in harsh environments of utility substations and industrial facilities, DCE has developed a series of OEM PCB modems that can operate at 5V logic (TTL) or simple send and receive signals and survive high surge levels and extreme heat and cold. All this without
compromising the performance expected from state-of-the-art communication devices. With the rapid move toward “intelligent” substations, where meters, relays, RTUs, SCADA systems, etc. are able to
“talk” to a remote operator, communication devices such as modems
are moving off the desktop and into the meters, RTUs, and SCADA
units where the conveniences of a standalone modem is unacceptable. Data Connect Enterprise has addressed this problem by developing the PE28.8 OEM modem designed specifically for harsh environments.
The PE 28.8 OEM modem is highly sophisticated full duplex, V.34
data modem that is designed to interface with RS232, RS485
(external device), 5V logic (TTL) or simple send and receive signals.
The 28.8 OEM modem operates at full duplex on a dial up line.
SPECIFICATIONS
Modem Line Speeds:
Asynchronous 28800, 14400, 9600, 4800, 2400, 1200, 300bps
Standards:
V.34, V.32bis, V.32, V.22bis, V.22, Bell 212A, and Bell 103
Transmission Line:
Dial-up
Compatibility:
Hayes Extended AT Command Set
Power:
5V logic (TTL)
Card size:
3.4” x 0.01” x 0.5”
Digital port:
DTE 8-pin, simple send/receive signals
Analog port:
RJ11 modular jack
Surge protection (Power line):
8kV (exceeds IEC801-4) (20kV [IE801-5] available if required)
Surge protection (Analog line):
5kVAC
Environment:
-40°C to +85°C, 0-95% humidity (non condensing)
Certifications:
FCC part 68, industry Canada
95
DATA CONNECT ENTERPRISE
PHONE: 301.924.7400 EXT 17
3405 OLANDWOOD CT
FAX: 301.924.7403
OLNEY, MD 20832
USA
www.data-connect.com
INDUSTRIAL SOLUTIONS
NETWORK ANYWHERE
INDUSTRIAL MODEMS
MAIN MODEM CHART
96
V.29 MODEM CHECK LIST
MODEL
MAX.
SPEED
HIGH LOW
RACK
DIN SECUR- WALL
VOLT. VOLT. DIAL LEASED MOUNT MOUNT ITY MOUNT
DCE/IG192HFP
19.2KBPS
X
X
X
X
X
X
97 DCE/IG96HFP
9.6KBPS
X
X
X
X
X
X
98 DCE/DSP9612
9.6KBPS
X
X
X
X
PHOTO
PAGE 99 96
DATA CONNECT ENTERPRISE
PHONE: 301.924.7400 EXT 17
3405 OLANDWOOD CT
FAX: 301.924.7403
OLNEY, MD 20832
USA
www.data-connect.com
INDUSTRIAL SOLUTIONS
NETWORK ANYWHERE
INDUSTRIAL MODEMS
IG192HFP
97
DCE IG192HFP
SPECIFICATIONS
The IG192HFP industrial grade 19.2 kbps hyper fast poll modem is
designed to operate over 4-wire full duplex or 2-wire half duplex unconditional leased lines or private metallic circuits. For optimum performance,
the modem employs QAM modulation and Viterbi decoding scheme along
with its adaptive equalizer to communicate over a variety of transmission
lines. The IG192HFP supports DTE/RTUs with an EIA RS-232 and RS-485
serial port at speeds of 19200, 9600, 4800, 2400 and 1200 bps. With its
Auto-RTS mode, the modem can support DTE/RTUs with 3-wire serial
interface (TD, RD, SG) in multi-point polling applications.
The triple mode capability allows the IG192HFP industrial grade 19.2
kbps hyper fast poll modem to communicate with older generating
DSP9612FP at up to 9600 kbps and both the Bell 202T and V.23 FSK modems at up to 1200 bps.
The IG192HFP industrial grade 19.2 kbps hyper fast poll modem is
designed to operate over a wide range of AC or DC power supply voltages
and temperatures. With proven reliability and ease of installations, the
IG192HFP is deal for point-to-multipoint polling networks, where fast
training time and low network latency are critical for system performance.
ORDERING INFORMATION
DCE/IG192HFP
DCE/IG192HFP-LV
)DCE/IG192HFP-HV
DCE/IG192HFP-RM
DCE/192HFP-WMB
STANDALONE (100-240VAC)
STANDALONE (10-48 VDC
STANDALONE (100-240 VAC, 85-400 VDC)
RM16M RACK-MOUNT MODULE
WALL-MOUNT/PANEL-MOUNT KIT
TRIPLE MODE:
Hyper Fast Poll mode at 19200bps. 17.4 ms RTS-CTS delay QAM
mode at 9600/4800/2400bps. 23 ms RTS-CTS delay FSK mode
for both Bell 202T (0-1800bps) and V23 (0-1200bps)
DTE/RTU INTERFACE:
RS-232 interface with full control signals support (DB-9F) RS485/RS422 support, 4-wire F.D., or 2-wire H.D. Auto RTS and
forced RTS options to support 3-wire interface
LEASED LINE INTERFACE:
TELCO 2- or 4- wire conditioned or unconditioned lines Private
metallic 2 or 4 wire circuits
Cable equalizers for long distance over standard cables
MECHANICAL:
Enclosure dimensions: 5.0” (W) x 6.75”( L) x 1.3” (H)
127mm (W) x 172mm (L) x 33mm (H)
DIAGNOSTIC:
Local or remote Analog + digital loopback eight (8) front panel
LEDS for status monitoring
AC and DC Power Support:
Standalone: 10-48 VDC, 85-400 VDC, 100-240 AC Rack Mount
Module: Plug-in RM16M modem rack
ENVIRONMENTAL:
Operating temperature: -40 to 85 Degrees Celsius
Storage temperature: -40 to 100 Degrees Celsius
Humidity: up to 95%, non-condensing
OPTIONAL MOUNTING KITS:
Wall-mount or panel mount kit DIN rail mounting kit
POWER + CURRENT CONSUMPTION:
125 mA @ 12 VDC
28.0 mA @ 48 VDC
97
DATA CONNECT ENTERPRISE
PHONE: 301.924.7400 EXT 17
3405 OLANDWOOD CT
FAX: 301.924.7403
OLNEY, MD 20832
USA
www.data-connect.com
INDUSTRIAL SOLUTIONS
NETWORK ANYWHERE
INDUSTRIAL MODEMS
IG96HFP
98
DCE IG96HFP
SPECIFICATIONS
The IG96HFP industrial grade 9.6 kbps hyper fast modem is designed to
operate over 4-wire full duplex or 2 wire half duplex unconditioned leased
lines or private metallic circuits. For optimum performance, the modem employs QAM modulations along with its adaptive equalizers to communicate
over a variety of transmissions lines. The IG96HFP supports DTE/RTUs with
an EIA RS-232 andRS-485 serial port at speeds of 9600, 4800, 2400 and 1200
bps. EIA its Auto-RTS mode, the modem can support DTE/RTUs with 3-wire
serial interface (TD, RD, and SG) in multi-point polling applications.
The triple mode capability allows the IG96HFP industrial grade 9.6 kbps
hyper fast poll modem to communicate with the older generation
DSP9612FP at up to 9600 kbps and both the Bell 202T and V.23 FSK modem
at up to 1200 bps.
The IG96HFP industrial grade 9.6 kbps hyper fast poll modem to range
AC or DC power supply voltage and temperatures, with proven reliability
and ease of installation, the IG96HFP is deal for point-to-multipoint polling
networks, where fast training time and low-network latency are critical for
system performance.
ORDERING INFORMATION
DCE/IG96HFP
DCE/IG96HFP-LV
DCE/IG96HFP-HV
DCE/IG96HFP-RM
DCE/96HFP-WMB
DCE/IG96HFP-DIN
STANDALONE (100-240VAC)
STANDALONE (10-48 VDC)
STANDALONE (100-240 VAC, 85-400 VDC)
RM16M RACK-MOUNT MODULE
WALL-MOUNT/PANEL-MOUNT KIT
DIN RAIL MOUNTING KIT
TRIPLE MODE:
Hyper Fast Poll mode at 9600, 17.5 ms RTS-CTS delay QAM
mode at 9600/4800/4200bps 23 ms RTS-CTS delay FSK mode for
Bell 202T (0-1800) modes
DTE/RTU INTERFACE:
RS-232 interface with full control signals support (db-9F) RS485/RS422 support, 4-wire F.D., or 2-wire H.D Auto RTS and
forced RTS options to support 3-wire interface
LEASED LINE INTERFACE:
Telco 2- or 4- wire conditioned or unconditioned lines private
metallic 2 or 4 wire circuits. Cable equalizer for long distance
over standard cables
MECHANICAL:
Enclosure Dimensions: 5.0” (W) x 6.75” (L) x 1.3” (H). 127mm
(W) x 172mm (L) x 33mm (H)
DIAGNOSTICS:
Local or remote Analog + digital loopback Eight (8) front panel
LEDs for status monitoring AC and DC
POWER SUPPORT:
Standalone: 10-48 VDC, 85-400 VDC, 100-240 AC Rack Mount
modules: Plug-in RM16M modem rack
ENVIRONMENTAL:
Operating temperatures:-40 to 85 degrees Celsius storage temperature:-40 to 100 degrees Celsius humidity: up to 95% noncondensing
OPTIONAL MOUNTING KITS:
Wall-mount or panel-mount kit
DIN rail mounting kit
POWER+ CURRENT CONSUMPTION:
125 mA @ 12 VDC
28.0 mA @ 48 VDC
98
DATA CONNECT ENTERPRISE
PHONE: 301.924.7400 EXT 17
3405 OLANDWOOD CT
FAX: 301.924.7403
OLNEY, MD 20832
USA
www.data-connect.com
INDUSTRIAL SOLUTIONS
NETWORK ANYWHERE
INDUSTRIAL MODEMS
DSP9612
99
DCE DSP9612
The DCE Fast Poll DSP9612 is a triple mode, full featured 9600 QAM fast
poll, ITU V.23 and Bell 202T leased line or private wire modem with the fastest training time in the industry: 23msec RTS?CTS delay at 9600bps and
8ms in Bell 202T mode. The DSP9612 is ideal for utility and industrial automation multi-dropping applications, where an unlimited number or drops is
desirable at ranges up to 16 miles (26km), including SCADA systems, traffic
automation and oil or gas automation products.
The DSP9612 is a modem designed for 4-wire full duplex or 2 wire halfduplex operation over a voice-band leased line or private copper wire. The
modem designed utilizes the latest digital-signal processing (DSP) technology to achieve high performance with an adaptive equalizer for the best
operation on the poor unconditional lines.
In Fast Poll Mode (9600/4800bps), the dsp9612 employs a propriety
modulation and encoding scheme to achieve fast modem training time in
V.23 or Bell 202T mode, the modem is also backward compatible with V.23
(0-1800bps) modems.
Ideal for systems where fast response, shirt training time and low
throughput is required, the Flash poll is optimized for fast receiver equalizer training and extremely low through put delay.
The triple mode capability allows the DSP9612 to communicate with
existing V.23 or Bell 202T modems at up to 1800bps, which can then be
upgraded later to DCE DSP9612 Fast poll standalone modems and switched
to 9600bps. Three models are available: Rack mount (RM) for insertion into
RM16 nest, stand alone AC/DC powered (FP) and standalone low Voltage
DC powered (LV).
Auto RTS is a new feature allowing multi-drop for devices with 3 wire
data interfaces and no control signals (no RTS signal) required.
FEATURES
Fast poll modems are industrial grade modems designed for harsh environmental conditions [-40 to 85 degrees Celsius] with ultra fast polling times.
Triple mode: QAM 9600 or 4800 bps, ITU V.23 and Bell202T.
Fast Training modem equalizer with 23msec RTS/CTS delay @ 9600/4800bps.
DSP designed with automatic adaptive equalizer.
Leased-line or private wire interfaces. Line and power protected with heavyduty surge protection.
Stand alone or nest card for RM16 nest.
All settings are DIP switch selectable with no software commands
Auto RTS allows multi-drop for devices with three wire data interface.
SPECIFICATIONS
DATA RATE
Fast Poll Mode: 9600 or 4800 bps asynchronous, +1% -2.5%
Bell 202T Mode: 0-1800 bps asynchronous
V.23 Mode:
0-1200bps asynchronous
DATA FORMAT - 8 or 9 data bits with 1 more stop bits
LINE REQIREMENTS - TELCO Voice band 2 or 2 wire leased line.
Private metal RS-232 (DTE) INTERFACE
Signal Name
in/out DP25
PIN Description
Earth
GND1
Earth Ground
TXD
Input 2
Transmit Data
RXD
Output 3
Receive Data
RTS
Input 4
Request to Send
CTS
Output 5
Clear to Send
DSR
Output 6
Data Set Ready
(Modem Ready)
SG
GND7
Signal Ground
DCD
Output 8
Data Carrier Detected
DTR
Input20
Data Terminal Ready
(HOST READY)
DSR
Input23
Data Select Rate
OPERATING MODES - 2-wire half duplex or 4-wire full duplex
MODULATION - DCE Propriety (Fast Poll Mode)
EQUALIZER - Automatic, adaptive in Fast Poll Mode, Fixed compromised in FSK mode
TRAINING TIME (RTS to CTS Delay)
Fast Poll Mode: 23ms V23 33ms
Bell 202T Mode:8, 33, 59, 219 ms
CABLE EQUALIZER - Fixed transmitter and receiver cable equalizer
POWER SUPPLY (BY MODEL)
DSP9612RM, powered from RM16 Rack
DSP9612LV, 10 to 53 VDC
DSP9612FP, 85 to 265 VAC or 85 to 400 VDC
SURGE PROTECTION - Provided at power line and leased line; Up
to 15KV (Standalone Version)
CARRIER CONTROL - Constant or switched, DIP Switch available
SYNCHRONIZATION LOSS RECOVERY - Built in Train on Data for
Fast Poll
TRANSMIT OUTPUT LEVEL +3dbm, to -14dbm, 1dbm step (Dip
Switch available)
OPERATING TEMPERATURE - -40 Degrees Celsius to 85 Degrees
Celsius
RM FORM FACTOR - Rack-Mount Modem card for the DCE and the
Motorola/UDS MD16M Universal Data Shelf
Dimension 9” x 6.25 x 0.87”
Weight 8oz.
LV AND FP FORM FACTOR - Aluminum and Steel Case
Dimensions: 5.7” x 8.3” x1.5” (144.78mm x 210.82mm x 38.1mm)
Weight: 1.9lb (227 grams)
DIAGNOSTIC FEATURES
Front panel LED for status monitoring: Power (PWR), Request to
send (RTS), Clear to Send (CTS), Transmit Data (TXD), Receive
Data (RXD), Data Carrier Detect (DCD), Data Set Ready (DSR), Analog Loopback (ALB), Digital Loopback (DLB)
Front Panel loopback control for testing: Local Analog Loopback
(ALB), Local Digital Loopback (DLB), Remote Digital Loopback
(RDL)(except V.23 Mode)
DIAGNOSTIC FEATURES
Front panel LED for status monitoring: Power (PWR), Request to
Send (RTS), Clear to Send (CTS), Transmit Data (TD), Receive Data
(RD), Data Carrier Detect (DCD),
Data Set Ready (DSR), Analog Loopback,
Digital Loopback
Front Panel loopback control for testing: Local Analog Loopback,
Local Digital Loopback, Remote Digital Loopback (except V.23
Mode)
99
DATA CONNECT ENTERPRISE
PHONE: 301.924.7400 EXT 17
3405 OLANDWOOD CT
FAX: 301.924.7403
OLNEY, MD 20832
USA
www.data-connect.com
INDUSTRIAL SOLUTIONS
NETWORK ANYWHERE
INDUSTRIAL MODEMS
V.32BIS MODEM CHECK LIST
100
V.32BIS MODEM CHECK LIST
MODEL
MAX.
SPEED
HIGH LOW
RACK
DIN SECUR- WALL
VOLT. VOLT. DIAL LEASED MOUNT MOUNT ITY MOUNT
DCE/1442E-003-2
33.6KBPS
X
X
X
DCE/IG144
14.4KBPS
X
X
X
X
DCE/IG144S
14.4KBPS
X
X
X
X
DCE/MIU14.4
14.4KBPS
X
X
X
104
DCEMIUPP14.4
14.4KBPS
X
X
X
105
DCE/MD14.4
14.4KBPS
X
DCE/PE14.4
14.4KBPS
X
DCE/MIU14.4L
14.4KBPS
X
X
X
109
DCE/MIUPP14.4L
14.4KBPS
X
X
X
110
DCE/MD14.4L
14.4KBPS
X
DCE/PE14.4L
14.4KBPS
X
DCE/1442E-203-3
14.4KBPS
X
DCE/1442E-103-2
14.4KBPS
X
X
DCE/1442R-003-4
14.4KBPS
X
X
DCE/1442E-503-2
14.4KBPS
X
X
X
PHOTO
PAGE 101
X
X
X
102
X
103
106
108
X
111
113
114
115
X
116
117
100
DATA CONNECT ENTERPRISE
PHONE: 301.924.7400 EXT 17
3405 OLANDWOOD CT
FAX: 301.924.7403
OLNEY, MD 20832
USA
www.data-connect.com
INDUSTRIAL SOLUTIONS
NETWORK ANYWHERE
INDUSTRIAL MODEMS
1442E-003-2
101
DCE 1442E-003-2
SPECIFICATIONS
Compatibility:
DTE Interface:
For data center and remote network applications that require low-speed
connections, the Data Connect ST1442E series modem incorporates the
latest advance in modem design to deliver efficient and reliable performance.
The Data Connect ST1442E series modem has been developed to meet
the most stringent environmental and performance demands of the commercial and industrial application. Every relay, transformer, capacitor, switch
and connector is selected for its ability to withstand industrial environmental demands
The industrial-rated Data Connect ST1442E may be housed in an optional
metal enclosure and is built to meet the most stringent criteria. Temperature
ratings, for example, range from -40˚C to + 85˚C versatile power supply option will meet most industrial applications.
At connect speeds of 14400bps and below, our patented quick Connect
features reduce modem connect time by as much as 50%
The Data Connect ST1442E series modem is available in commercial and
industrial single-port standalone configurations. Rack mount configurations
are also available.
FEATURES
Standard 2-wire Dial-up
2-wire and 4-wire leased-line or short haul operation
AT Command Set
Standard Error Correction and Compression
RS232 & RS485 Terminal Interfaces
Asynchronous and Synchronous DTE Support
Exclusive Quick Connect
ORDERING INFORMATION
DCE/1442E-003-2
Data Connect V32BIS 14.4KBPS Dial Modem
V.32bis/V.32/V.22bis/V.22/Bell 212A/Bell 103J.
RS232C (V.24), synchronous or asynchronous
auto baud or selectable formats and rates to
57.6kbps. Industrial model includes RS485
Auto Dial modes: Standard AT compatible dial commands or DTR
dial or stored number
Answer modes:
Standard auto answer or manual answer under
DTE control
Error Correction: V.42 and MNP 2-4 error correction
Data Compression:
V.42bis and MNP5 data compression
Configuration Control:
Standard AT commands for both local and
remote configurations.
Diagnostic:
V.54 through AT command
Network Interface:
Dial-up 2-wire Pulse or DTMF
XMT level—12dBm
RCV sensitivity—43dBm
2-wire and 4-wire leased and short-haul
XMT level – adjustable
RCV sensitivity –43dBm
Power:
Standalone single port standard unit
automatically adjust to 9VAC or
9-14VDC
Power Supply Options:
5.5-14VDC, 18-75VDC / 66-160VDC
Rack-mount:
Standard CC-2016 rack automatically adjusts
to 85-265VAC, 27-440Hz.
Optional DC supply:
automatically adjusts to positive or negative
36-75VDC
Environmental:
Commercial Unit
Operating temperature range
20˚C to +70˚C
Humidity - 90% non-condensing
Industrial Unit
Operating temperature range
40˚C to +85˚C
Humidity - 95% non-condensing
Approvals:
FCC Part 68 & Part 15, class A
Optional International approvals are available.
Physical:
Commercial Unit
Dimensions
5.30”L X 5.05”W 1.53”H
Weight
12oz.
Rackmount Unit
Fits CC-2016 rack
4.73”L x 4.60”W x 80”H
Weight
9oz.
Industrial Unit
Dimensions
6.190”L x 5.120”W 1.750”H
Weight
32oz. (Metal Enclosure)
101
DATA CONNECT ENTERPRISE
PHONE: 301.924.7400 EXT 17
3405 OLANDWOOD CT
FAX: 301.924.7403
OLNEY, MD 20832
USA
www.data-connect.com
INDUSTRIAL SOLUTIONS
NETWORK ANYWHERE
INDUSTRIAL MODEMS
IG144
102
DCE IG144
The Data Connect DCE/IG144 high speed V.32bis dial-line modems are
designed and manufactured for rugged industrial applications over the
Public Switched Telephone Network (PSTN). The DCE/IG144 utilizes the
industries latest V.32bis modem technology to deliver outstanding features, performance, and reliability in one cost-effective solution.
The DCE/IG144 modems are ideally suited for industrial communication application including SCADA systems, RTs, traffic monitor and control, and industrial automation networks. The DCE/IG144 supports RTUs
equipped with an EIA RS-232 or RS-485 serial port. Data communications speeds up to 14.4 kbps in reception and up and up to 9.6 kbps in
transmission are supported.
The modems incorporate the latest data-compression and errorcorrection standards for improved data transmission and reception over
marginal and poor-quality telephone lines. Multiple levels of security
with password verification and security call back keep your valuable
data secure from intruders.
The DCE/IG144 modems are powered by wide range of AC and DC
power supply voltage. Its low power consumption and low stand-by current technology design makes the DCE/IG144 ideal for a battery-powered
system as well as regular AC powered operations.
FEATURES
Worldwide Operation Support:
-ITU-T V.32bis/V.32/V.22bis/V.22/V.23/V.21/Bell 212A/Bell 103
-V29 FastPOS/V.22bis fast connect
Data Compression: V.44/V.42bis/MNP 2
Error Correction: V.42/MNP 2/MNP 4
DTE/ Host Interface
EIA RS-232 and RS-485
Embedded AT Command Set
63 embedded and upgradable country profiles for worldwide homologation
NVRAM for configuration and country profile storage
Built-in remote diagnostics and configuration management
Heavy-duty surge protection provided at power supply and phone line interface
Supports wide range of AC & DC power supply options
Supports DC power supplied from DTE or DB-9 connector
Wide range of operation temperatures
Optional mounting kits for DIN rail mounting or wall mount
ORDERING INFORMATION
DCE/IG144
DCEIG144DC
DCE/IG144-HV
DCE/IG202T-DIN
Standalone with AC power module, 90-264VAC
Standalone, DC power, 10-48VDC
Standalone with AC power module, 90-264VAC
or 100-400VDC
DCE EN2 Din Rail Kit
SPECIFICATIONS
Data Modem:
ITU-T V32bis: Up to 14.4kbps receive & 9.6kbps
transit
V.32: Up to 14400bps //V.32 Up to 9600 bps
V.22bis: Up to 2400 bps
V.21: 0-300 bps
Bell 212A: 1200bps
Bell 103: 0-300
Fax modem:
Send and receive fax up to 14.4 kbps
V17, V29, V27ter, and V21 channel 2
EIA/TIA 578 Class 1, T.31 Class 1.0, and Class 2
Data Format:
Asynchronous, 7, 8 and 9 data bits parity, 10- or 11-bit character with 1 or 2 stop bits
Modulation:
Fully compatible with ITU-T V.32bis/ V.22bis/V.21 Bell
212A and Bell 103 compatible
Transmission Line Interface:
2-wire full duplex over PSTN connector RJ-11C
DTE/RTU Interface
The modem provides serial ports to supports RS-232 or RS-485
(selectable) interface standards:
RS-232 Interface
Connectors: DB9-F
Signals: RTS, CTS, CD, TD, RD, DTR, DSR, RI
RS-485 Interface
Connector: RJ-11C
Signals: 4-wire full duplex or 2-wire half duplex
TX+, TX-, RX- and RXLED Indicators:
DTR, TXD, RXD, DCD, DSR, RI
Power Supply
Three models support various power options:
Standalone - 90-264VAC
Standalone - 100-400VDC
Standalone - 10-48VDC
Power Consumption:
Idle mode - 65 mA@12V, 0.78watts
Normal mode - 75 mA@12V, 0.9 watts, typical
Mechanical
Enclosure dimensions:
4.1” (W) x 5.0” (L) x 1.3” (H)
104mm (W) x 127mm (L) x 33mm (H)
Weight: 0.5 pounds, without AC power module
Environment
Temperature:
Operation - -40˚C to +85˚C
Storage - -40˚C to +85˚C
Humidity
Up to 95% non-condensing
Dry Contact Detection (optional)
Two Optical isolated dry contact
detection are provided for external
devices (consult factory for additional
information)
102
DATA CONNECT ENTERPRISE
PHONE: 301.924.7400 EXT 17
3405 OLANDWOOD CT
FAX: 301.924.7403
OLNEY, MD 20832
USA
www.data-connect.com
INDUSTRIAL SOLUTIONS
NETWORK ANYWHERE
INDUSTRIAL MODEMS
IG144S
103
DCE IG144S
SPECIFICATIONS
The Data Connect DCE/IG144S high speed V.32bis dial-line modems are
designed and manufactured for rugged industrial applications over the
Public Switched Telephone Network (PSTN) with security features such as
password log-in and security call-back. The DCE/IG144S utilizes the industries latest V.32bis modem technology to deliver outstanding features,
performance, and reliability in one cost-effective solution.
The DCE/IG144S modems are ideally suited for industrial communication application including SCADA systems, RTs, traffic monitor and control, and industrial automation networks. The DCE/IG14S supports RTUs
equipped with an EIA RS-232 or RS-485 serial port. Data communications
speeds up to 14.4 kbps are supported.
The modems incorporate the latest data-compression and errorcorrection standards for improved data transmission and reception over
marginal and poor-quality telephone lines. Multiple levels of security with
password verification and security call back keep your valuable data secure from intruders.
The DCE/IG144S modems are powered by wide range of AC and DC
power supply voltage. Its low power consumption and low stand-by current
technology design makes the DCE/IG144S ideal for a battery-powered system as well as regular AC powered operations.
FEATURES
Worldwide Operation Support:
-ITU-T V.32bis/V.32/V.22bis/V.22/V.23/V.21/Bell 212A/Bell 103
-V29 FastPOS/V.22bis fast connect/V.44/V.42bis/MNP 2/V.42/MNP 2/MNP 4
Security Options: Password log-in / Security call-back
DTE/ Host Interface
EIA RS-232 and RS-485
Embedded AT Command Set
63 embedded and upgradable country profiles for worldwide homologation
NVRAM for configuration and country profile storage
Built-in remote diagnostics and configuration management
Heavy-duty surge protection provided at power supply and phone line interface
Supports wide range of AC & DC power supply options
Supports DC power supplied from DTE or DB-9 connector
Wide range of operation temperatures
Optional mounting kits for DIN rail mounting or wall mount
ORDERING INFORMATION
DCE/IG144S
DCEIG144SDC
DCE/IG144-S-HV
DCE/IG202T-DIN
Standalone with AC power module, 90-264VAC
Standalone, DC power, 10-48VDC
Standalone with AC power module, 90-264VAC
or 100-400VDC
DCE EN2 Din Rail Kit
Data Modem:
ITU-T V32bis: Up to 14.4kbps receive & 9.6kbps
transit
V.32: Up to 14400bps
V.32 Up to 9600 bps
V.22bis: Up to 2400 bps
V.21: 0-300 bps
Bell 212A: 1200bps
Bell 103: 0-300
Fax modem:
Send and receive fax up to 14.4 kbps
V17, V29, V27ter, and V21 channel 2
EIA/TIA 578 Class 1, T.31 Class 1.0, and Class 2
Data Format:
Asynchronous, 7, 8 and 9 data bits parity, 10- or
11-bit character with 1 or 2 stop bits
Modulation:
Fully compatible with ITU-T V.32bis/ V.22bis/V.21 Bell
212A and Bell 103 compatible
Transmission Line Interface:
2-wire full duplex over PSTN connector RJ-11C
DTE/RTU Interface
The modem provides serial ports to supports RS-232 or
RS-485 (selectable) interface standards:RS-232 Interface
Connectors - DB9-F
Signals - RTS, CTS, CD, TD, RD, DTR, DSR, RI
RS-485 Interface
Connector - RJ-11C
Signals - 4-wire full duplex or 2-wire half duplex
TX+, TX-, RX- and RXFront Panel Indicators
LED Indicators:
DTR, TXD, RXD, DCD, DSR, RI
Security Options
Password Log-in
Security call-back
Power Supply
Three models support various power options:
Standalone:
90-264VAC
Standalone:
100-400VDC
Standalone
10-48VDC
Power Consumption:
Idle mode:
65 mA@12V, 0.78watts
Normal mode:
75 mA@12V, 0.9 watts, typical
Mechanical
Enclosure dimensions:
4.1” (W) x 5.0” (L) x 1.3” (H)
104mm (W) x 127mm (L) x 33mm (H)
Weight: 0.5 pounds, without AC power module
Environment
Temperature:
Operation - -40˚C to +85˚C
Storage - -40˚C to +85˚C
Humidity - Up to 95% non-condensing
Dry Contact Detection (optional)
Two Optical isolated dry contact
detection are provided for external
devices (consult factory for additional
information)
103
DATA CONNECT ENTERPRISE
PHONE: 301.924.7400 EXT 17
3405 OLANDWOOD CT
FAX: 301.924.7403
OLNEY, MD 20832
USA
www.data-connect.com
INDUSTRIAL SOLUTIONS
NETWORK ANYWHERE
INDUSTRIAL MODEMS
MIU-14.4
104
DCE MIU-14.4
FEATURES
To service the growing need for efficient, reliable data communication in harsh environments of utility substation and industrial facilities, has developed a 14400bps modem that can operate from various
AC/DC power supplies and survive high surge levels and extreme heat
and cold. All this without compromising the performance expected
from state-of-the-art communications devices.
With the rapid move toward “intelligent” substations, where meters, relays, RTUs, SCADA systems, etc. are able to “talk” to a remote
operator, communication devices such as modems are moving off the
desktop and into the field, where the convenience of 115VAC power
outlets and climate control are usually hard to find.
Data Connect Enterprise has addressed this problem by developing the MIU14.4 series modem designed specifically for harsh environments.
The MIU14.4 series modem is highly sophisticated full duplex,
V.32BIS data modem that designed to interface with RS232, RS485
(external device), 5V logic (TTL) or simple send and receive signals
The MIU14.4 series modem operates on a dial-up line systems.
The MIU14.4series modem is powered from unique power supply
that enables it to operate on any AC or DC voltage ranging from 48V to
240V. A low voltage version (9-36VDC) is also available. The MIU14.4
modem is designed to work in temperatures from 40˚C to 85˚C and is
surge protected on both the power and analog lines.
The MIU14.4 series modem is bundled in a 5-3/8” x 1-3/8” nonmetallic enclosure, suitable for desktop or wall mounting.
Also see our Data sheets on the MIU/power-port low voltage modems, the “Myriad” Rack Mount Modem, MIU202T (Bell), MIU28.8 and
MIU9.6FPD modems
ORDERING INFORMATION
DCE/MIU-14.4
DCE/MIU-14.4LV
Data Connect V.32BIS, 14.4KBPS Dial Modem
48V-240V
Data Connect V.32BIS, 14.4KBPS Dial Modem
9– 36VDC
Modem Interface Units AC/DC Powered
Substation Hardened Communication Interface Units
14.4kbps 2-wire Dial line modem
48 to 220 AC/DC Power Supply
IEC801-4 Surge Protection
-40˚C to +85˚C Operating Temperature
For Meters, Relay, SCADA etc.
SPECIFICATIONS
Modem Line Speeds:
Asynchronous
14400, 9600, 4800, 1200, 300bps
DTE Rates:
Above modem line speeds (IE; with data
compression) 57.6, 38.4 19.2kbps
Standards:
V.32bis, V.32, V.22bis, V.22, Bell 212A, and
Bell 103
Transmission Line:
2-Wire Dial
Compatibility:
Hayes Extended AT command set
Power Supply:
48VAC/DC to 220VAC/DC (Optional 9-36VDC)
Power Connector: 4-ft AC Cord with 3-pin screw
terminal connector included
Case size:
5-3/8” x 4” x 1-3/8”
Digital Port:
RS232 withDB9 connector
Analog Port:
RJ11 Modular Jack
Surge Protection: (power line) 8kV [exceeds IEC801-4] (20kV
{IE801-5} available if required)
Surge Protection: 3.75VAC
Environment:
-40˚C to +85˚C, 0 to 95% humidity (noncondensing)
Certifications:
FCC Part 68, Industry Canada
104
DATA CONNECT ENTERPRISE
PHONE: 301.924.7400 EXT 17
3405 OLANDWOOD CT
FAX: 301.924.7403
OLNEY, MD 20832
USA
www.data-connect.com
INDUSTRIAL SOLUTIONS
NETWORK ANYWHERE
INDUSTRIAL MODEMS
MIU-PP14.4
105
DCE MIU-PP14.4
FEATURES
Modem Interface Units AC/DC Powered
Substation Hardened Communication Interface Units
14.4kbps 2&$ wire leased line modem
Powered through the RS232 (DB25) data interface port or External
Jack
(Optional 7-16VDC available)
Automatic “Power Down” when inactive
IEC801-4 Surge Protection
-40˚C to +85˚C Operating Temperature
Hayes AT compatible
Works with meters, Relays, SCADA, etc.
To service the growing need for efficient, reliable data communication in a harsh environmental of utility substations and industrial facilities, has developed a 14400bps modem that can operate from various AC/DC power supplies and survive high surge levels and extreme
heat and cold. All this without compromising the performance expected from state-of-the-art communications devices.
With the rapid move toward “intelligent” substation, where meters
relays, RTU’s, SCADA system, etc are able to “talk” to a remote operator, communication devices such as modems moving off the desktop
and into the field, where the convenience of 115VAC power outlets
and climate control are usually hard to find.
Data Connect Enterprise has addressed this problem by developing the PowerPortMIU14.4 series modem designed specifically for
harsh environments.
The PowerPortMIU14.4 series modem is highly sophisticated full
duplex, V.32BIS data modem that designed to interface with RS232,
RS485 (external device), 5V logic (TTL) or simple send and receive
signals The PowerPortMIU14.4 series modem operates on a 2-Wire
Dial-up system.
The PowerPortMIU14.4 series modem is powered from unique
power supply that enables it to operate on any AC or DC voltage ranging from 48V to 240V. A low voltage version (9-36VDC) is also available. The PowerPortMIU14.4 modem is designed to work in temperatures from 40˚C to 85˚C and is surge protected on both the power and
analog lines.
The PowerPortMIU14.4 series modem is bundled in a 5-3/8” x 1-3/8”
non-metallic enclosure, suitable for desktop or wall mounting.
Also see our Data sheets on the MIU/power-port low voltage modems, the “Myriad” Rack Mount Modem, MIU202T (Bell), MIU9.6FPD,
MIU14.4, and MIU28.8 modems.
ORDERING INFORMATON
DCE/MIU-PP14.4
SPECIFICATIONS
Modem Line Speeds:
Asynchronous 14400, 9600, 4800, 1200, 300bps
DTE Rates:
Above modem line speeds (IE; with data compression)
57.6, 38.4 19.2kbps
Standards:
V.32bis, V.32, V.22bis, V.22, Bell 212A, and Bell 103
Transmission Line:
Dial or 2&4 wire leased line
Compatibility:
Hayes Extended AT command set
Powered through the RS232 (DB25) data interface port
or external jack (optional 7- 16VDC available)
Case size:
5-3/8” x 4” x 1-3/8”
Digital Port:
RS232 withDB9 connector
Analog Port:
RJ11 Modular Jack
Surge Protection:
(power line) 8kV [exceeds IEC801-4] (20kV {IE801-5}
available if required)
Surge Protection:
3.75VAC
Environment:
-40˚C to +85˚C, 0 to 95% humidity (non-condensing)
Certifications:
FCC Part 68, Industry Canada
Data Connect V.32BIS 14.4 Dial Modem with
5VDC Power thru DB25
105
DATA CONNECT ENTERPRISE
PHONE: 301.924.7400 EXT 17
3405 OLANDWOOD CT
FAX: 301.924.7403
OLNEY, MD 20832
USA
www.data-connect.com
INDUSTRIAL SOLUTIONS
NETWORK ANYWHERE
INDUSTRIAL MODEMS
MD14.4
106
DCE MD14.4
FEATURES
14.4kbps 2-Wire Dial line modem
IEC801-4 surge protection
-20˚C to +80˚C Operating Temperature
Works with Meters, Relays, SCADA, etc.
SPECIFICATIONS
The Data Connect MD14.4 is the rack mount version of the Data Connect
MIU14.4 and MIU14.4-LV. The same functionally that it can be found in the
MIU14.4 and MIU14.4-LV can be found in the MD14.4.
The Data Connect MD.14.4 is a Bell V.32bis modem designed for asynchronous operation at 0 to 14400bps over voice grade lines. The modem is
intended for use on two-wire dial lines.
The MD14.4 is comprised of MDMC carrier card and PE14.4 module. Up
to 18 MD14.4 can be front loaded into a MDR Modem Bank.
The MDR Modem Bank is an industrial grade 19” X 3U rack mountable
chassis. The MDR Modem Bank is powered from a wide range of AC or DC
voltages. Two power supply cards can be installed to provide automatic
back up in the event the primary power supply fails. The MDR will operate
in temperatures from -20˚C to +85˚C and is surge protected on both power
and analog lines.
Two power supply slots are provided. Power supply cards are available
for any voltages in the range 9-150VDC and 9-275VAC. A single power supply card will power all 18 MD14.4.
In addition to MD14.4 the MDR Modem Bank also houses the MD28.8,
MD14.4L, MD9.6FPD, and MD202T.
Modem Line Speeds:
Asynchronous 14000, 9600, 4800, 1200, 300bps
DTE Rates:
Above modem line speed (IE; with data compression
57.6, 38.4, 19.2kbps)
Standards:
V.32bis, V.32, V.22bis, V.22, Bell212A, and Bell 103
Transmission Line:
2-wire dial
Compatibility:
Hayes Extended AT Command Set
Digital Port:
RS232 with DB9 connector
Analog Port:
RJ11 Modular Jack
Surge Protection:
(Power Line) 8kV [Exceeds IE801-4] (20Kv {IE801-5} available if
required)
Surge Protection
3.75VAC
Environment:
-40˚C or + 85˚C, 0 to 95% humidity (non-condensing)
Certification:
FCC Part 68, Industry Canada
ORDERING INFORMATION
DCE/MD14.4
DCE/PE14.4
Data Connect V.32bis, 14.4Kbps Rackmount Modem
Data Connect V.32bis, 14.4Kbps OEM (PCB) Modem
106
DATA CONNECT ENTERPRISE
PHONE: 301.924.7400 EXT 17
3405 OLANDWOOD CT
FAX: 301.924.7403
OLNEY, MD 20832
USA
www.data-connect.com
INDUSTRIAL SOLUTIONS
NETWORK ANYWHERE
INDUSTRIAL MODEMS
MDR
107
DCE MDR
FEATURES
18 Modem Slots
Dial & Leased Line Modems
V.22, 202T, 9.6FPD, V.32bis, V.34
Hayes AT Compatibility
Full Array of LEDs
Standard 19” x 5.25” (3U) Euro-Chassis
AC or DC Power from 9 to 300VAC or VDC
Dual Power Supplies with Full Redundancy
Ideal for SCADA Master Stations
The Data Connect MDR Modem Chassis is designed to house
eighteen (18) DCE MD Modem Cards and two (2) DCE MDP Power
Supplies. The DCE MDR Modem Chassis is hardened industrial
grade, 19” wide, 3U height (5.25”H), and constructed heavy gauge
steel with plating for corrosion resistance.
The DCE MD Modem Cards are comprised of a DCE MDMC Modem
Carrier Card and a DCE PE OEM Card. The DCE MD202T (Bell 202T),
MD9.6FPD (Proprietary), MD2.4 (V.22), MD14.4 (V.32bis), MD14.4L
(V.32bis), and MD28.8 (V.34) operate within the DCE MDR Modem
Chassis and are hot-swappable. Any mix of the DCE MD modems
can be utilized simultaneously.
Two (2) DCE MDP Power Supplies Cards provide full redundancy
and are available for any voltage in the range of 9-150VDC and 9275VAC. A single DCE MDP Power Supply Card powers eighteen
(18) Modem Cards. A second DCE MDP Power Supply Card, if installed, provides automatic backup in the event of a failure of the
primary DCE MDP Power Supply Card.
SPECIFICATIONS
EIA Standards
Compliant with EIA Standard EIA-310-C
Modem Interface Connectors (Rear)
Serial RS232: DB25F
Analog Port: RJ11
LEDs (Front)
(Top to bottom)
DTR: Data Terminal Ready
TXD: Transmit Data
RXD: Receive Data
MR: Modem Ready
CD: Carrier Detect
RTS: Request to Send
CTS: Clear to Send
RI: Ring Indicator
Power Requirements
AC Power: 9 to275VAC – Fused Socket (IEC 320)
DC Power: 9 to 150VDC – Screw Terminals – 9 to 150VDC
Dimensions
Width: 19”
Depth:
Height: 5.25” (3U)
Environmental
Operating Temperature: -20 to +85 Degrees Celsius
107
DATA CONNECT ENTERPRISE
PHONE: 301.924.7400 EXT 17
3405 OLANDWOOD CT
FAX: 301.924.7403
OLNEY, MD 20832
USA
www.data-connect.com
INDUSTRIAL SOLUTIONS
NETWORK ANYWHERE
INDUSTRIAL MODEMS
PE14.4
108
DCE/PE14.4
FEATURES
Modem Interface Units 5V logic (TTL)
Simple send and receive signals
14400kbps 2-wire dial-up line modem
5V logic (TTL) power supply
IEC801-4 surge protection
-40°C to +85°C operating temperature
For meters, relays, SCADA etc.
SPECIFICATIONS
To service the growing need for efficient, reliable data communication
in harsh environments of utility substations and industrial facilities,
DCE has developed a series of OEM PCB modems that can operate at
5V logic (TTL) or simple send and receive signals and survive high
surge levels and extreme heat and cold. All this without compromising
the performance expected from state-of-the-art communication devices. With the rapid move toward “intelligent” substations, where meters, relays, RTUs, SCADA systems, etc. are able to “talk” to a remote
operator, communication devices such as modems are moving off the
desktop and into the meters, RTUs, and SCADA units where the conveniences of a standalone modem is unacceptable. Data Connect Enterprise has addressed this problem by developing
the PE14.4 OEM modem designed specifically for harsh environments.
The PE14.4 OEM modem is highly sophisticated full duplex, V.32bis
data modem that is designed to interface with RS232, RS485 (external
device), 5V logic (TTL) or simple send and receive signals. The PE14.4
OEM modem operates at full duplex on a dial up line.
The PE 14.4
PCB can be found in the MIU14.4 modem, MD14.4 modem card, and the
MIU-PP14.4 modem.
ORDERING INFORMATION
DCE/PE14.4
Data Connect V.32bis, 14.4Kbps OEM (PCB) Modem
Modem Line Speeds:
Asynchronous 14000, 9600, 4800, 2400, 1200, 300bps
Standards:
V.32bis, V.32, V.22bis, Bell 212A, Bell 103
Transmission line:
Dial-up
Compatibility:
Hayes Extended AT Command Set
Power:
5V logic (TTL)
Card size:
3.4” x 0.01” x 0.5”
Digital port:
DTE 8-pin, simple send/receive signals
Analog port:
RJ11 modular jack
Surge protection (Power line):
8kV (exceeds IEC801-4) (20kV [IE801-5] available if required)
Surge protection (Analog line):
5kVAC
Environment:
-40°C to +85°C, 0-95% humidity (non condensing)
Certifications:
FCC part 68, industry Canada
108
DATA CONNECT ENTERPRISE
PHONE: 301.924.7400 EXT 17
3405 OLANDWOOD CT
FAX: 301.924.7403
OLNEY, MD 20832
USA
www.data-connect.com
INDUSTRIAL SOLUTIONS
NETWORK ANYWHERE
INDUSTRIAL MODEMS
MIU14.4L
109
DCE MIU14.4L
FEATURES
Modem Interface Units AC/DC Powered
Substation Hardened Communication Interface Units
14.4kbps 2 & 4-wire leased line modem
48 to 220 AC/DC Power Supply
IEC801-4 Surge Protection
-40˚C to +85˚C Operating Temperature
For Meters, Relay, SCADA etc.
SPECIFICATIONS
To service the growing need for efficient, reliable data communication in
harsh environments of utility substation and industrial facilities, has developed a 14400bps modem that can operate from various AC/DC power supplies and survive high surge levels and extreme heat and cold. All this without compromising the performance expected from state-of-the-art communications devices.
With the rapid move toward “intelligent” substations, where meters, relays, RTUs, SCADA systems, etc. are able to “talk” to a remote operator,
communication devices such as modems are moving off the desktop and
into the field, where the convenience of 115VAC power outlets and climate
control are usually hard to find.
Data Connect Enterprise has addressed this problem by developing the
MIU14.4 series modem designed specifically for harsh environments.
The MIU14.4 series modem is highly sophisticated full duplex, V.32BIS
data modem that designed to interface with RS232, RS485 (external device),
5V logic (TTL) or simple send and receive signals The MIU14.4L series modem operates on 2-wire and 4-wire leased line systems.
The MIU14.4 series modem is powered from unique power supply that
enables it to operate on any AC or DC voltage ranging from 48V to 240V. A
low voltage version (9-36VDC) is also available. The MIU14.4 series modem
is designed to work in temperatures from 40˚C to 85˚C and is surge protected on both the power and analog lines.
The MIU14.4 series modem is bundled in a 5-3/8” x 1-3/8” non-metallic
enclosure, suitable for desktop or wall mounting.
Also see our Data sheets on the MIU/power-port low voltage modems, the
“Myriad” Rack Mount Modem, MIU202T (Bell), MIU28.8 and MIU9.6FPD mo-
Modem Line Speeds:
Asynchronous
14400, 9600, 4800, 1200, 300bps
DTE Rates:
Above modem line speeds (IE; with data
compression) 57.6, 38.4 19.2kbps
Standards:
V.32bis, V.32, V.22bis, V.22, Bell 212A, and
Bell 103
Transmission Line:
2 & 4-wire leased line
Compatibility:
Hayes Extended AT command set
Power Supply:
48VAC/DC to 220VAC/DC (Optional 9-36VDC)
Power Connector: 4-ft AC Cord with 3-pin screw
terminal connector included
Case size:
5-3/8” x 4” x 1-3/8”
Digital Port:
RS232 with DB9 connector
Analog Port:
RJ11 Modular Jack
Surge Protection: (power line) 8kV [exceeds IEC801-4] (20kV
{IE801-5} available if required)
Surge Protection: 3.75VAC
Environment:
-40˚C to +85˚C, 0 to 95% humidity (noncondensing)
Certifications:
FCC Part 68, Industry Canada
109
DATA CONNECT ENTERPRISE
PHONE: 301.924.7400 EXT 17
3405 OLANDWOOD CT
FAX: 301.924.7403
OLNEY, MD 20832
USA
www.data-connect.com
INDUSTRIAL SOLUTIONS
NETWORK ANYWHERE
INDUSTRIAL MODEMS
MIU-PP14.4L
110
DCE MIU-PP14.4L
FEATURES
Modem Interface Units AC/DC Powered
Substation Hardened Communication Interface Units
14.4kbps 2 or 4-Wire Leased Line modem
Powered through the RS232 (DB25) data interface port or External Jack
(Optional 7-16VDC available)
Automatic “Power Down” when inactive
IEC801-4 Surge Protection
-40˚C to +85˚C Operating Temperature
Hayes AT compatible
Specifications
To service the growing need for efficient, reliable data communication in
a harsh environmental of utility substations and industrial facilities, has
developed a 14400bps modem that can operate from various AC/DC power
supplies and survive high surge levels and extreme heat and cold. All this
without compromising the performance expected from state-of-the-art communications devices.
With the rapid move toward “intelligent” substation, where meters relays,
RTU’s, SCADA system, etc are able to “talk” to a remote operator, communication devices such as modems moving off the desktop and into the field,
where the convenience of 115VAC power outlets and climate control are
usually hard to find.
Data Connect Enterprise has addressed this problem by developing the
PowerPortMIU14.4 series modem designed specifically for harsh environments.
The PowerPortMIU14.4L series modem is highly sophisticated full duplex, V.32BIS data modem that designed to interface with RS232, RS485
(external device), 5V logic (TTL) or simple send and receive signals The
PowerPortMIU14.4L series modem operates on a 2 or 4-Wire Leased Line
and Short Haul systems.
The PowerPortMIU14.4L series modem is powered from unique power
supply that enables it to operate on any AC or DC voltage ranging from 48V
to 240V. A low voltage version (9-36VDC) is also available. The PowerPortMIU14.4L modem is designed to work in temperatures from 40˚C to 85˚C and
is surge protected on both the power and analog lines.
The PowerPortMIU14.4L series modem is bundled in a 5-3/8” x 1-3/8” non
-metallic enclosure, suitable for desktop or wall mounting.
Also see our Data sheets on the MIU/power-port low voltage modems, the
“Myriad” Rack Mount Modem, MIU202T (Bell), MIU9.6FPD, MIU14.4, and
MIU28.8 modems.
Modem Line Speeds:
Asynchronous
14400, 9600, 4800, 1200, 300bps
DTE Rates:
Above modem line speeds (IE; with data compression)
57.6, 38.4 19.2kbps
Standards:
V.32bis, V.32, V.22bis, V.22, Bell 212A, and Bell 103
Transmission Line:
Dial or 2&4 wire leased line
Compatibility:
Hayes Extended AT command set
Powered through the RS232 (DB25) data interface
port
or external jack (optional 7- 16VDC available)
Case size:
5-3/8” x 4” x 1-3/8”
Digital Port:
RS232 withDB9 connector
Analog Port:
RJ11 Modular Jack
Surge Protection:
(power line) 8kV [exceeds IEC801-4] (20kV {IE801-5}
available if required)
Surge Protection:
3.75VAC
Environment:
-40˚C to +85˚C, 0 to 95% humidity (non-condensing)
Certifications:
FCC Part 68, Industry Canada
110
DATA CONNECT ENTERPRISE
PHONE: 301.924.7400 EXT 17
3405 OLANDWOOD CT
FAX: 301.924.7403
OLNEY, MD 20832
USA
www.data-connect.com
INDUSTRIAL SOLUTIONS
NETWORK ANYWHERE
INDUSTRIAL MODEMS
MD14.4L
111
DCE MD14.4L
FEATURES
14.4kbps 2 or 4-wire Leased Line modem
IEC801-4 surge protection
-20˚C to +80˚C Operating Temperature
Works with Meters, Relays, SCADA, etc.
SPECIFICATIONS
The Data Connect MD14.4L is the rack mount version of the Data Connect
MIU14.4L and MIU14.4-LV. The same functionally that it can be found in the
MIU14.4L and MIU14.4-LV can be found in the MD14.4L.
The Data Connect MD.14.4L is a Bell V.32bis modem designed for asynchronous operation at 0 to 14400bps over voice grade lines. The modem is
intended for use on two or four wire Leased Lines.
The MD14.4L is comprised of MDMC carrier card and PE14.4L module.
Up to 18 MD14.4L can be front loaded into a MDR Modem Bank.
The MDR Modem Bank is an industrial grade 19” X 3U rack mountable
chassis. The MDR Modem Bank is powered from a wide range of AC or DC
voltages. Two power supply cards can be installed to provide automatic
back up in the event the primary power supply fails. The MDR will operate
in temperatures from -20˚C to +85˚C and is surge protected on both power
and analog lines.
Two power supply slots are provided. Power supply cards are available
for any voltages in the range 9-150VDC and 9-275VAC. A single power supply card will power all 18 MD14.4L.
In addition to MD14.4L the MDR Modem Bank also houses the MD28.8,
MD14.4, MD9.6FPD, and MD202T.
DTE Rates:
Asynchronous 14000, 9600, 4800, 1200, 300bps
Standards:
V.32bis, V.32, V.22bis, V.22, Bell212A, and Bell 103
Transmission Line:
2- and 4-wire leased line
Compatibility:
Hayes Extended AT Command Set
Digital Port:
RS232 with DB9 connector
Analog Port:
RJ11 Modular Jack
Surge Protection:
(Power Line) 8kV [Exceeds IE801-4] (20Kv {IE801-5}
available if required)
Surge Protection
3.75VAC
Environment:
-40˚C or + 85˚C, 0 to 95% humidity (non-condensing)
Certification:
FCC Part 68, Industry Canada
111
DATA CONNECT ENTERPRISE
PHONE: 301.924.7400 EXT 17
3405 OLANDWOOD CT
FAX: 301.924.7403
OLNEY, MD 20832
USA
www.data-connect.com
INDUSTRIAL SOLUTIONS
NETWORK ANYWHERE
INDUSTRIAL MODEMS
MDR
112
DCE MDR
FEATURES
18 Modem Slots
Dial & Leased Line Modems
V.22, 202T, 9.6FPD, V.32bis, V.34
Hayes AT Compatibility
Full Array of LEDs
Standard 19” x 5.25” (3U) Euro-Chassis
AC or DC Power from 9 to 300VAC or VDC
Dual Power Supplies with Full Redundancy
Ideal for SCADA Master Stations
The Data Connect MDR Modem Chassis is designed to house
eighteen (18) DCE MD Modem Cards and two (2) DCE MDP Power
Supplies. The DCE MDR Modem Chassis is hardened industrial
grade, 19” wide, 3U height (5.25”H), and constructed heavy gauge
steel with plating for corrosion resistance.
The DCE MD Modem Cards are comprised of a DCE MDMC Modem
Carrier Card and a DCE PE OEM Card. The DCE MD202T (Bell 202T),
MD9.6FPD (Proprietary), MD2.4 (V.22), MD14.4 (V.32bis), MD14.4L
(V.32bis), and MD28.8 (V.34) operate within the DCE MDR Modem
Chassis and are hot-swappable. Any mix of the DCE MD modems
can be utilized simultaneously.
Two (2) DCE MDP Power Supplies Cards provide full redundancy
and are available for any voltage in the range of 9-150VDC and 9275VAC. A single DCE MDP Power Supply Card powers eighteen
(18) Modem Cards. A second DCE MDP Power Supply Card, if installed, provides automatic backup in the event of a failure of the
primary DCE MDP Power Supply Card.
SPECIFICATIONS
EIA Standards
Compliant with EIA Standard EIA-310-C
Modem Interface Connectors (Rear)
Serial RS232: DB25F
Analog Port: RJ11
LEDs (Front)
(Top to bottom)
DTR: Data Terminal Ready
TXD: Transmit Data
RXD: Receive Data
MR: Modem Ready
CD: Carrier Detect
RTS: Request to Send
CTS: Clear to Send
RI: Ring Indicator
Power Requirements
AC Power: 9 to275VAC – Fused Socket (IEC 320)
DC Power: 9 to 150VDC – Screw Terminals – 9 to 150VDC
Dimensions
Width: 19”
Depth:
Height: 5.25” (3U)
Environmental
Operating Temperature: -20 to +85 Degrees Celsius
112
DATA CONNECT ENTERPRISE
PHONE: 301.924.7400 EXT 17
3405 OLANDWOOD CT
FAX: 301.924.7403
OLNEY, MD 20832
USA
www.data-connect.com
INDUSTRIAL SOLUTIONS
NETWORK ANYWHERE
INDUSTRIAL MODEMS
PE14.4
113
DCE PE14.4
FEATURES
Modem Interface Units 5V logic (TTL)
Simple send and receive signals
14400kbps 2-wire dial-up line modem
5V logic (TTL) power supply
IEC801-4 surge protection
-40°C to +85°C operating temperature
For meters, relays, SCADA etc.
To service the growing need for efficient, reliable data communication
in harsh environments of utility substations and industrial facilities,
DCE has developed a series of OEM PCB modems that can operate at
5V logic (TTL) or simple send and receive signals and survive high
surge levels and extreme heat and cold. All this without compromising
the performance expected from state-of-the-art communication devices. With the rapid move toward “intelligent” substations, where meters, relays, RTUs, SCADA systems, etc. are able to “talk” to a remote
operator, communication devices such as modems are moving off the
desktop and into the meters, RTUs, and SCADA units where the conveniences of a standalone modem is unacceptable. Data Connect Enterprise has addressed this problem by developing
the PE14.4L OEM modem designed specifically for harsh environments.
The PE14.4L OEM modem is highly sophisticated full duplex, V.32bis
data modem that is designed to interface with RS232, RS485 (external
device), 5V logic (TTL) or simple send and receive signals. The PE14.4L
OEM modem operates at half and full duplex 2 & 4-Wire Leased Lins.
The PE 14.4L PCB can be found in the MIU14.4 modem, MD14.4 modem
card, and the MIU-PP14.4 modem.
ORDERING INFORMATION
DCE/PE14.4
Data Connect V.32bis, 14.4Kbps OEM (PCB) Modem
SPECIFICATIONS
Modem Line Speeds:
Asynchronous 14000, 9600, 4800, 2400, 1200, 300bps
Standards:
V.32bis, V.32, V.22bis, Bell 212A, Bell 103
Transmission line:
2 or 4-Wire Leased Lines
Compatibility:
Hayes Extended AT Command Set
Power:
5V logic (TTL)
Card size:
3.4” x 0.01” x 0.5”
Digital port:
DTE 8-pin, simple send/receive signals
Analog port:
RJ11 modular jack
Surge protection (Power line):
8kV (exceeds IEC801-4) (20kV [IE801-5] available if required)
Surge protection (Analog line):
5kVAC
Environment:
-40°C to +85°C, 0-95% humidity (non condensing)
Certifications:
FCC part 68, industry Canada
113
DATA CONNECT ENTERPRISE
PHONE: 301.924.7400 EXT 17
3405 OLANDWOOD CT
FAX: 301.924.7403
OLNEY, MD 20832
USA
www.data-connect.com
INDUSTRIAL SOLUTIONS
NETWORK ANYWHERE
INDUSTRIAL MODEMS
1442E-203-2
114
DCE 1442E-203-2
SPECIFICATIONS
Compatibility:
For data center and remote network applications that require
low-speed connections, the Data Connect ST1442E-203-2 modem incorporates the latest advance in modem design to deliver
efficient and reliable performance.
The Data Connect ST1442E-203-2 modem has been developed to meet the most stringent environmental and performance
demands of the commercial and industrial application. Every
relay, transformer, capacitor, switch and connector is selected
for its ability to withstand industrial environmental demands
The industrial-rated Data Connect ST1442E-203-2 modem
may be housed in an optional metal enclosure and is built to
meet the most stringent criteria. Temperature ratings, for example, range from -40˚C to + 85˚C versatile power supply option
will meet most industrial applications.
At connect speeds of 14400bps and below, our patented
quick Connect features reduce modem connect time by as much
as 50%
The Data Connect ST1442E-203-2 modem is available in commercial and industrial single-port standalone configurations.
Rack mount configurations are also available.
FEATURES
Standard 2-wire Dial-up
2-wire dial operation
AT Command Set
Standard Error Correction and Compression
RS232 & RS485 Terminal Interfaces
Asynchronous and Synchronous DTE Support
ORDERING INFORMATION
DCE/1442E-203-2 Data Connect V32BIS 14.4KBPS Dial Modem
V.32bis, V.32, V.22bis, V.22, Bell 212A,
Bell 103J.
DTE Interface:
RS232C (V.24), synchronous or asynchronous
auto baud or selectable formats and rates to
57.6kbps. Industrial model includes RS485
Auto Dial modes: Standard AT compatible dial commands or DTR
dial or stored number
Answer modes:
Standard auto answer or manual answer under
DTE control
Error Correction: V.42 and MNP 2-4 error correction
Data Compression:
V.42bis and MNP5 data compression
Configuration Control:
Standard AT commands for both local and
remote configurations.
Diagnostic:
V.54 through AT command
Network Interface:
Dial-up 2-wire Pulse or DTMF
XMT level—12dBm
RCV sensitivity—43dBm
2-wire and 4-wire leased and short-haul
XMT level – adjustable
RCV sensitivity –43dBm
Power:
Standalone single port standard unit
automatically adjust to 9VAC or 9-14VDC
Power Supply Options:
5.5-14VDC, 18-75VDC / 66-160VDC
Rack-mount:
Standard CC-2016 rack automatically adjusts
to 85-265VAC, 27-440Hz.
Optional DC supply:
Automatically adjusts to positive or negative 3675VDC
Environmental:
Commercial Unit
Operating temperature range
20˚C to +70˚C
Humidity
90% non-condensing
Industrial Unit
Operating temperature range
40˚C to +85˚C
Humidity
95% non-condensing
Approvals:
FCC Part 68 & Part 15, class A
Optional International approvals are available.
Physical:
Commercial Unit
Dimensions
5.30”L X 5.05”W 1.53”H
Weight
12oz.
Rackmount Unit
Fits CC-2016 rack
4.73”L x 4.60”W x 80”H
Weight
9oz.
Industrial Unit
Dimensions
6.190”L x 5.120”W 1.750”H
Weight
114
DATA CONNECT ENTERPRISE
PHONE: 301.924.7400 EXT 17
3405 OLANDWOOD CT
FAX: 301.924.7403
OLNEY, MD 20832
USA
www.data-connect.com
INDUSTRIAL SOLUTIONS
NETWORK ANYWHERE
INDUSTRIAL MODEMS
1442E-103-2
115
DCE 1442E-103-2
SPECIFICATIONS
Compatibility:
For data center and remote network applications that require
low-speed connections, the Data Connect ST1442E-103-2 modem incorporates the latest advance in modem design to deliver
efficient and reliable performance.
The Data Connect ST1442E-103-2 modem has been developed to meet the most stringent environmental and performance
demands of the commercial and industrial application. Every
relay, transformer, capacitor, switch and connector is selected
for its ability to withstand industrial environmental demands
The industrial-rated Data Connect ST1442E-103-2 modem
may be housed in an optional metal enclosure and is built to
meet the most stringent criteria. Temperature ratings, for example, range from -40˚C to + 85˚C versatile power supply option
will meet most industrial applications.
At connect speeds of 14400bps and below, our patented
quick Connect features reduce modem connect time by as much
as 50%
The Data Connect ST1442E-103-2 modem is available in commercial and industrial single-port standalone configurations.
Rack mount configurations are also available.
FEATURES
Standard 2-wire Dial-up
2-Wire dial operation
AT Command Set
Standard Error Correction and Compression
RS232 & RS485 Terminal Interfaces
Asynchronous and Synchronous DTE Support
ORDERING INFORMATION
DCE/1442E-103-2 Data Connect V32BIS 14.4KBPS Dial Modem
V.32bis, V.32, V.22bis, V.22, Bell 212A,
Bell 103J.
DTE Interface:
RS232C (V.24), synchronous or asynchronous
auto baud or selectable formats and rates to
57.6kbps. Industrial model includes RS485
Auto Dial modes: Standard AT compatible dial commands or DTR
dial or stored number
Answer modes:
Standard auto answer or manual answer under
DTE control
Error Correction: V.42 and MNP 2-4 error correction
Data Compression:
V.42bis and MNP5 data compression
Configuration Control:
Standard AT commands for both local and
remote configurations.
Diagnostic:
V.54 through AT command
Network Interface:
Dial-up 2-wire Pulse or DTMF
XMT level—12dBm
RCV sensitivity—43dBm
2-wire and 4-wire leased and short-haul
XMT level – adjustable
RCV sensitivity –43dBm
Power:
Standalone single port standard unit
automatically adjust to 9VAC or 9-14VDC
Power Supply Options:
5.5-14VDC, 18-75VDC / 66-160VDC
Rack-mount:
Standard CC-2016 rack automatically adjusts
to 85-265VAC, 27-440Hz.
Optional DC supply:
Automatically adjusts to positive or negative 3675VDC
Environmental:
Commercial Unit
Operating temperature range
20˚C to +70˚C
Humidity
90% non-condensing
Industrial Unit
Operating temperature range
40˚C to +85˚C
Humidity
95% non-condensing
Approvals:
FCC Part 68 & Part 15, class A
Optional International approvals are available.
Physical:
Commercial Unit
Dimensions
5.30”L X 5.05”W 1.53”H
Weight
12oz.
Rackmount Unit
Fits CC-2016 rack
4.73”L x 4.60”W x 80”H
Weight
9oz.
Industrial Unit
Dimensions
6.190”L x 5.120”W 1.750”H
Weight
115
DATA CONNECT ENTERPRISE
PHONE: 301.924.7400 EXT 17
3405 OLANDWOOD CT
FAX: 301.924.7403
OLNEY, MD 20832
USA
www.data-connect.com
INDUSTRIAL SOLUTIONS
NETWORK ANYWHERE
INDUSTRIAL MODEMS
1442R-003-4
116
DCE 1442R-003-4
SPECIFICATIONS
Compatibility:
For data center and remote network applications that require
low-speed connections, the Data Connect ST1442E-003-4 Rackmount modem incorporates the latest advance in modem design
to deliver efficient and reliable performance.
The Data Connect ST1442E-003-4 Rackmount modem has
been developed to meet the most stringent environmental and
performance demands of the commercial and industrial application. Every relay, transformer, capacitor, switch and connector
is selected for its ability to withstand industrial environmental
demands
The industrial-rated Data Connect ST1442E-003-4 Rackmount
modem may be housed in an optional metal enclosure and is
built to meet the most stringent criteria. Temperature ratings, for
example, range from -40˚C to + 85˚C versatile power supply option will meet most industrial applications.
At connect speeds of 14400bps and below, our patented
quick Connect features reduce modem connect time by as much
as 50%
The Data Connect ST1442E-003-4 Rackmount modem is available in commercial and industrial single-port rackmount configurations. Standalone configurations are also available.
FEATURES
Standard 2-wire Dial-up
2-Wire Dial or 4-Wire Leased Line operation
AT Command Set
Standard Error Correction and Compression
RS232 & RS485 Terminal Interfaces
Asynchronous and Synchronous DTE Support
ORDERING INFORMATION
DCE/1442E-003-4 Data Connect V32BIS 14.4KBPS Dial Modem
V.32bis, V.32, V.22bis, V.22, Bell 212A,
Bell 103J.
DTE Interface:
RS232C (V.24), synchronous or asynchronous
auto baud or selectable formats and rates to
57.6kbps. Industrial model includes RS485
Auto Dial modes: Standard AT compatible dial commands or DTR
dial or stored number
Answer modes:
Standard auto answer or manual answer under
DTE control
Error Correction: V.42 and MNP 2-4 error correction
Data Compression:
V.42bis and MNP5 data compression
Configuration Control:
Standard AT commands for both local and
remote configurations.
Diagnostic:
V.54 through AT command
Network Interface:
Dial-up 2-wire Pulse or DTMF
XMT level—12dBm
RCV sensitivity—43dBm
2-wire and 4-wire leased and short-haul
XMT level – adjustable
RCV sensitivity –43dBm
Power:
Standalone single port standard unit
automatically adjust to 9VAC or 9-14VDC
Power Supply Options:
5.5-14VDC, 18-75VDC / 66-160VDC
Rack-mount:
Standard CC-2016 rack automatically adjusts
to 85-265VAC, 27-440Hz.
Optional DC supply:
Automatically adjusts to positive or negative 3675VDC
Environmental:
Commercial Unit
Operating temperature range
20˚C to +70˚C
Humidity
90% non-condensing
Industrial Unit
Operating temperature range
40˚C to +85˚C
Humidity
95% non-condensing
Approvals:
FCC Part 68 & Part 15, class A
Optional International approvals are available.
Physical:
Commercial Unit
Dimensions
5.30”L X 5.05”W 1.53”H
Weight
12oz.
Rackmount Unit
Fits CC-2016 rack
4.73”L x 4.60”W x 80”H
Weight
9oz.
Industrial Unit
Dimensions
6.190”L x 5.120”W 1.750”H
Weight
116
DATA CONNECT ENTERPRISE
PHONE: 301.924.7400 EXT 17
3405 OLANDWOOD CT
FAX: 301.924.7403
OLNEY, MD 20832
USA
www.data-connect.com
INDUSTRIAL SOLUTIONS
NETWORK ANYWHERE
INDUSTRIAL MODEMS
1442E-503-2
117
DCE 1442E-503-2
SPECIFICATIONS
Compatibility:
For data center and remote network applications that require
low-speed connections, the Data Connect ST1442E-503-2 modem incorporates the latest advance in modem design to deliver
efficient and reliable performance.
The Data Connect ST1442E-503-2 modem has been developed to meet the most stringent environmental and performance
demands of the commercial and industrial application. Every
relay, transformer, capacitor, switch and connector is selected
for its ability to withstand industrial environmental demands
The industrial-rated Data Connect ST1442E-503-2 modem
may be housed in an optional metal enclosure and is built to
meet the most stringent criteria. Temperature ratings, for example, range from -40˚C to + 85˚C versatile power supply option
will meet most industrial applications.
At connect speeds of 14400bps and below, our patented
quick Connect features reduce modem connect time by as much
as 50%
The Data Connect ST1442E-503-2 modem is available in commercial and industrial single-port standalone configurations.
Rack mount configurations are also available.
FEATURES
Standard 2-wire Dial-up
2-Wire dial operation
AT Command Set
Standard Error Correction and Compression
RS232 & RS485 Terminal Interfaces
Asynchronous and Synchronous DTE Support
ORDERING INFORMATION
DCE/1442E-503-2 Data Connect V32BIS 14.4KBPS Dial Modem
V.32bis, V.32, V.22bis, V.22, Bell 212A,
Bell 103J.
DTE Interface:
RS232C (V.24), synchronous or asynchronous
auto baud or selectable formats and rates to
57.6kbps. Industrial model includes RS485
Auto Dial modes: Standard AT compatible dial commands or DTR
dial or stored number
Answer modes:
Standard auto answer or manual answer under
DTE control
Error Correction: V.42 and MNP 2-4 error correction
Data Compression:
V.42bis and MNP5 data compression
Configuration Control:
Standard AT commands for both local and
remote configurations.
Diagnostic:
V.54 through AT command
Network Interface:
Dial-up 2-wire Pulse or DTMF
XMT level—12dBm
RCV sensitivity—43dBm
2-wire and 4-wire leased and short-haul
XMT level – adjustable
RCV sensitivity –43dBm
Power:
Standalone single port standard unit
automatically adjust to 9VAC or 9-14VDC
Power Supply Options:
5.5-14VDC, 18-75VDC / 66-160VDC
Rack-mount:
Standard CC-2016 rack automatically adjusts
to 85-265VAC, 27-440Hz.
Optional DC supply:
Automatically adjusts to positive or negative 3675VDC
Environmental:
Commercial Unit
Operating temperature range
20˚C to +70˚C
Humidity
90% non-condensing
Industrial Unit
Operating temperature range
40˚C to +85˚C
Humidity
95% non-condensing
Approvals:
FCC Part 68 & Part 15, class A
Optional International approvals are available.
Physical:
Commercial Unit
Dimensions
5.30”L X 5.05”W 1.53”H
Weight
12oz.
Rackmount Unit
Fits CC-2016 rack
4.73”L x 4.60”W x 80”H
Weight
9oz.
Industrial Unit
Dimensions
6.190”L x 5.120”W 1.750”H
Weight
117
DATA CONNECT ENTERPRISE
PHONE: 301.924.7400 EXT 17
3405 OLANDWOOD CT
FAX: 301.924.7403
OLNEY, MD 20832
USA
www.data-connect.com
INDUSTRIAL SOLUTIONS
NETWORK ANYWHERE
INDUSTRIAL MODEMS
MAIN MODEM CHART
118
V.22 MODEM CHECK LIST
MODEL
MAX.
SPEED
HIGH LOW
RACK
DIN SECUR- WALL
VOLT. VOLT. DIAL LEASED MOUNT MOUNT ITY MOUNT
DCE/2400E-000-2
2.4KBPS
X
DCE/2400E-034-2
2.4KBPS
X
DCE/2400E-030-4
2.4KBPS
X
X
DCE/2400E-330-4
2.4KBPS
X
X
DCE/MIU2.4
2.4KBPS
DCE/PPMIU2.4
X
X
PHOTO
PAGE 119 X
120 X
121 122 X
123 2.4KBPS
X
124 DCE/MD2.4
2.4KBPS
X
DCE/PE2.4
2.4KBPS
X
X
125 127 118
DATA CONNECT ENTERPRISE
PHONE: 301.924.7400 EXT 17
3405 OLANDWOOD CT
FAX: 301.924.7403
OLNEY, MD 20832
USA
www.data-connect.com
INDUSTRIAL SOLUTIONS
NETWORK ANYWHERE
INDUSTRIAL MODEMS
MAIN MODEM CHART
119
DCE 2400E-000-2
SPECIFICATIONS
Compatibility:
DTE Interface:
For data center and remote network applications that require lowspeed connections, the Data Connect ST2400E-000-2 modem incorporates the latest advances in modem design to deliver efficient and reliable performance.
The Data Connect ST2400E-000-2 modem has been developed to
meet the most stringent environmental and performance demands of
the commercial and industrial application. Every relay, transformer,
capacitor, switch and connector is selected for its ability to withstand
industrial environmental demands.
The industrial-rated Data Connect ST2400E-000-2 may be housed in
an optional metal enclosure and is built to meet the most stringent criteria. Temperature ratings, for example, range from -40˚C to +85˚C versatile power supply options will meet most industrial applications.
The Data Connect ST2400E-000-2 modem is available in commercial
and industrial single-port standalone configurations. Rack mount configurations are also available.
FEATURES
Standard 2-wire Dial-up
2-wire and 4-wire leased –line
or short haul operation
AT Command set
Standard Error Correction
and Compression
RS232 & RS485
Terminal Interfaces
Asynchronous and Synchronous
DTE Support
V.22bis, V.22, Bell 212A
RS232C (V.24), synchronous or synchronous—
auto baud or selectable formats and rates to
4.8Kbps. Industrial model includes RS485
Auto Dial Modes: Standard AT compatible dial commands or
DTR dial or stored number.
Answer Modes:
Standard auto answer or manual answer under
DTE control
Error Correction: V.42 and MNP 2-4 error correction
Data Compression: V.42bis and MNP5 data compression
Configuration Control: Standard AT commands for both local and
remote configuration
Diagnostic:
V.54 through AT command
Network Interface: Dial-up 2-wire pulse or DTMF
XMT level—adjustable
RCV sensitivity—43dBm
Power:
Standalone single port
Standard units automatically adjust to 9VAC or
9-14VAC
Power Supply Options: 5.5-14VDC, 18-75VDC 66-160VDC
Rack-mount:
Standard CC-2016 rack automatically adjusts
to 85-265VAC, 27-440Hz. Optional DC supply
automatically adjusts to positive or negative
36-75VDC
Environmental:
Commercial Unit- Operating temperature
range -20˚C to +70˚C
Humidity—90% non condensing
Industrial Unit - Operating temperature
range -40˚C to + 85˚C
Humidity—95% non condensing
Approvals:
FCC Part 68 & Part 15, class A.
Optional International approvals are available
Physical:
Commercial Unit: Dimensions
5.30”L x 5.05”W x 1.53”H
Weight- 12oz.
Rack-mount Unit: Fits CC-2016 rack
4.73”L x 4.60”W x 80”H
Weight- 9oz
Industrial Unit:
Dimensions
6.190”L x 5.12”W x 1.75”H
Weight—32oz
(metal enclosure)
ORDERING INFORMATION
DCE/2400E-000-2 V.22 2.4KBPS DIAL MODEM
119
DATA CONNECT ENTERPRISE
PHONE: 301.924.7400 EXT 17
3405 OLANDWOOD CT
FAX: 301.924.7403
OLNEY, MD 20832
USA
www.data-connect.com
INDUSTRIAL SOLUTIONS
NETWORK ANYWHERE
INDUSTRIAL MODEMS
MAIN MODEM CHART
120
DCE 2400E-034-2
SPECIFICATIONS
Compatibility:
DTE Interface:
For data center and remote network applications that require lowspeed connections, the Data Connect ST2400E-034-2 modem incorporates the latest advances in modem design to deliver efficient and reliable performance.
The Data Connect ST2400E-034-2 modem has been developed to
meet the most stringent environmental and performance demands of
the commercial and industrial application. Every relay, transformer,
capacitor, switch and connector is selected for its ability to withstand
industrial environmental demands.
The industrial-rated Data Connect ST2400E-034-2 may be housed in
an optional metal enclosure and is built to meet the most stringent criteria. Temperature ratings, for example, range from -40˚C to +85˚C versatile power supply options will meet most industrial applications.
At connect speeds of 2400bps and below, our patented Quick Connect features reduce modem connect time by as much as 50%
The Data Connect ST2400E-034-2 modem is available in commercial
and industrial single-port standalone configurations. Rack mount configurations are also available.
FEATURES
Standard 2-wire Dial-up
2-wire and 4-wire leased –line
or short haul operation
AT Command set
Standard Error Correction
and Compression
RS232 & RS485
Terminal Interfaces
Asynchronous and Synchronous
DTE Support
Exclusive Quick Connect
V.22bis, V.22, Bell 212A
RS232C (V.24), synchronous or synchronous—
auto baud or selectable formats and rates to
4.8Kbps. Industrial model includes RS485
Auto Dial Modes: Standard AT compatible dial commands or
DTR dial or stored number.
Answer Modes:
Standard auto answer or manual answer under
DTE control
Error Correction: V.42 and MNP 2-4 error correction
Data Compression: V.42bis and MNP5 data compression
Configuration Control: Standard AT commands for both local and
remote configuration
Diagnostic:
V.54 through AT command
Network Interface: Dial-up 2-wire pulse or DTMF
XMT level—adjustable
RCV sensitivity—43dBm
Power:
Standalone single port
Standard units automatically adjust to 9VAC or
9-14VAC
Power Supply Options: 5.5-14VDC, 18-75VDC 66-160VDC
Rack-mount:
Standard CC-2016 rack automatically adjusts
to 85-265VAC, 27-440Hz. Optional DC supply
automatically adjusts to positive or negative
36-75VDC
Environmental:
Commercial Unit- Operating temperature
range -20˚C to +70˚C
Humidity—90% non condensing
Industrial Unit - Operating temperature
range -40˚C to + 85˚C
Humidity—95% non condensing
Approvals:
FCC Part 68 & Part 15, class A.
Optional International approvals are available
Physical:
Commercial Unit: Dimensions
5.30”L x 5.05”W x 1.53”H
Weight- 12oz.
Rack-mount Unit: Fits CC-2016 rack
4.73”L x 4.60”W x 80”H
Weight- 9oz
Industrial Unit:
Dimensions
6.190”L x 5.12”W x 1.75”H
Weight—32oz
(metal enclosure)
ORDERING INFORMATION
DCE/2400E-034-2 2.4KBPS DIAL MODEM
120
DATA CONNECT ENTERPRISE
PHONE: 301.924.7400 EXT 17
3405 OLANDWOOD CT
FAX: 301.924.7403
OLNEY, MD 20832
USA
www.data-connect.com
INDUSTRIAL SOLUTIONS
NETWORK ANYWHERE
INDUSTRIAL MODEMS
MAIN MODEM CHART
121
DCE 2400E--030-4
SPECIFICATIONS
Compatibility:
DTE Interface:
For data center and remote network applications that require lowspeed connections, the Data Connect ST2400E-030-4 modem incorporates the latest advances in modem design to deliver efficient and reliable performance.
The Data Connect ST2400E-O30-4 modem has been developed to
meet the most stringent environmental and performance demands of
the commercial and industrial application. Every relay, transformer,
capacitor, switch and connector is selected for its ability to withstand
industrial environmental demands.
The industrial-rated Data Connect ST2400E-030-4 may be housed in
an optional metal enclosure and is built to meet the most stringent criteria. Temperature ratings, for example, range from -40˚C to +85˚C versatile power supply options will meet most industrial applications.
At connect speeds of 2400bps and below, our patented Quick Connect features reduce modem connect time by as much as 50%
The Data Connect ST2400E-030-4 modem is available in commercial
and industrial single-port standalone configurations. Rack mount configurations are also available.
FEATURES
Standard 2-wire Dial-up
2-wire and 4-wire leased –line
or short haul operation
AT Command set
Standard Error Correction
and Compression
RS232 & RS485
Terminal Interfaces
Asynchronous and Synchronous
DTE Support
Exclusive Quick Connect
V.22bis, V.22, Bell 212A
RS232C (V.24), synchronous or synchronous—
auto baud or selectable formats and rates to
4.8Kbps. Industrial model includes RS485
Auto Dial Modes: Standard AT compatible dial commands or
DTR dial or stored number.
Answer Modes:
Standard auto answer or manual answer under
DTE control
Error Correction: V.42 and MNP 2-4 error correction
Data Compression: V.42bis and MNP5 data compression
Configuration Control: Standard AT commands for both local and
remote configuration
Diagnostic:
V.54 through AT command
Network Interface: Dial-up 2-wire pulse or DTMF
XMT level—adjustable
RCV sensitivity—43dBm
Power:
Standalone single port
Standard units automatically adjust to 9VAC or
9-14VAC
Power Supply Options: 5.5-14VDC, 18-75VDC 66-160VDC
Rack-mount:
Standard CC-2016 rack automatically adjusts
to 85-265VAC, 27-440Hz. Optional DC supply
automatically adjusts to positive or negative
36-75VDC
Environmental:
Commercial Unit- Operating temperature
range -20˚C to +70˚C
Humidity—90% non condensing
Industrial Unit - Operating temperature
range -40˚C to + 85˚C
Humidity—95% non condensing
Approvals:
FCC Part 68 & Part 15, class A.
Optional International approvals are available
Physical:
Commercial Unit: Dimensions
5.30”L x 5.05”W x 1.53”H
Weight- 12oz.
Rack-mount Unit: Fits CC-2016 rack
4.73”L x 4.60”W x 80”H
Weight- 9oz
Industrial Unit:
Dimensions
6.190”L x 5.12”W x 1.75”H
Weight—32oz
(metal enclosure)
ORDERING INFORMATION
DCE/2400E-030-4 2.4KBPS DIAL & LEASED LINE MODEM
121
DATA CONNECT ENTERPRISE
PHONE: 301.924.7400 EXT 17
3405 OLANDWOOD CT
FAX: 301.924.7403
OLNEY, MD 20832
USA
www.data-connect.com
INDUSTRIAL SOLUTIONS
NETWORK ANYWHERE
INDUSTRIAL MODEMS
MAIN MODEM CHART
122
DCE 2400E-330-4
SPECIFICATIONS
Compatibility:
DTE Interface:
For data center and remote network applications that require lowspeed connections, the Data Connect ST2400E modem series incorporates the latest advances in modem design to deliver efficient and reliable performance.
The Data Connect ST2400E series modem has been developed to
meet the most stringent environmental and performance demands of
the commercial and industrial application. Every relay, transformer,
capacitor, switch and connector is selected for its ability to withstand
industrial environmental demands.
The industrial-rated Data Connect ST2400E may be housed in an
optional metal enclosure and is built to meet the most stringent criteria.
Temperature ratings, for example, range from -40˚C to +85˚C versatile
power supply options will meet most industrial applications.
At connect speeds of 2400bps and below, our patented Quick Connect features reduce modem connect time by as much as 50%
The Data Connect ST2400E series modem is available in commercial
and industrial single-port standalone configurations. Rack mount configurations are also available.
FEATURES
Standard 2-wire Dial-up
2-wire and 4-wire leased –line
or short haul operation
AT Command set
Standard Error Correction
and Compression
RS232 & RS485
Terminal Interfaces
Asynchronous and Synchronous
DTE Support
Exclusive Quick Connect
V.22bis, V.22, Bell 212A
RS232C (V.24), synchronous or synchronous—
auto baud or selectable formats and rates to
4.8Kbps. Industrial model includes RS485
Auto Dial Modes: Standard AT compatible dial commands or
DTR dial or stored number.
Answer Modes:
Standard auto answer or manual answer under
DTE control
Error Correction: V.42 and MNP 2-4 error correction
Data Compression: V.42bis and MNP5 data compression
Configuration Control: Standard AT commands for both local and
remote configuration
Diagnostic:
V.54 through AT command
Network Interface: Dial-up 2-wire pulse or DTMF
XMT level—adjustable
RCV sensitivity—43dBm
Power:
Standalone single port
Standard units automatically adjust to 9VAC or
9-14VAC
Power Supply Options: 5.5-14VDC, 18-75VDC 66-160VDC
Rack-mount:
Standard CC-2016 rack automatically adjusts
to 85-265VAC, 27-440Hz. Optional DC supply
automatically adjusts to positive or negative
36-75VDC
Environmental:
Commercial Unit- Operating temperature
range -20˚C to +70˚C
Humidity—90% non condensing
Industrial Unit - Operating temperature
range -40˚C to + 85˚C
Humidity—95% non condensing
Approvals:
FCC Part 68 & Part 15, class A.
Optional International approvals are available
Physical:
Commercial Unit: Dimensions
5.30”L x 5.05”W x 1.53”H
Weight- 12oz.
Rack-mount Unit: Fits CC-2016 rack
4.73”L x 4.60”W x 80”H
Weight- 9oz
Industrial Unit:
Dimensions
6.190”L x 5.12”W x 1.75”H
Weight—32oz
(metal enclosure)
ORDERING INFORMATION
DCE/2400E-000-2 2.4KBPS DIAL MODEM
122
DATA CONNECT ENTERPRISE
PHONE: 301.924.7400 EXT 17
3405 OLANDWOOD CT
FAX: 301.924.7403
OLNEY, MD 20832
USA
www.data-connect.com
INDUSTRIAL SOLUTIONS
NETWORK ANYWHERE
INDUSTRIAL MODEMS
MAIN MODEM CHART
123
DCE MIU2.4
FEATURES
To service the growing need for efficient, reliable data communication in a harsh environmental of utility substations and industrial facilities, has developed a 28800bps modem that can operate from various
AC/DC power supplies and survive high surge levels and extreme heat
and cold. All this without compromising the performance expected
from state-of-the-art communications devices.
With the rapid move toward “intelligent” substation, where meters
relays, RTU’s, SCADA system, etc are able to “talk” to a remote operator, communication devices such as modems moving off the desktop
and into the field, where the convenience of 115VAC power outlets and
climate control are usually hard to find.
Data Connect Enterprise has addressed this problem by developing
the MIU28.8 series modem designed specifically for harsh environments.
The MIU2.4 series modem is highly sophisticated full duplex, V.22
data modem that designed to interface with RS232, RS485 (external
device), 5V logic (TTL) or simple send and receive signals The MIU2.4
series modem operates on a dial-up system.
The MIU2.4 series modem is powered from unique power supply that
enables it to operate on any AC or DC voltage ranging from 48V to
240V. A low voltage version (9-36VDC) is also available. The MIU28.8
modem is designed to work in temperatures from 40˚C to 85˚C and is
surge protected on both the power and analog lines.
The MIU2.4 series modem is bundled in a 5-3/8” x 1-3/8” non-metallic
enclosure, suitable for desktop or wall mounting.
Also see our Data sheets on the MIU/power-port low voltage modems, the “Myriad” Rack Mount Modem, MIU (Bell), MIU14.4 and
MIU9.6FPD modems
ORDERING INFORMATION
DCE/MIU-2.4
DCE/MIU-2.4-LV
V.22 2.4Kbps2-Wire Dial Modem
V.22 2.4Kbps2-Wire Dial Modem Low Voltage
Modem Interface Units AC/DC Powered
Substation Hardened Communication Interface Units
2.4kbps 2-wire Dial Modem
48 to 220 AC/DC Power Supply
IEC801-4 Surge Protection
-40˚C to +85˚C Operating Temperature
For Meters, Relay, SCADA etc.
SPECIFICATIONS
Modem Line Speeds:
Asynchronous 2400, 1200, 300bps
DTE Rates: Above modem line speeds (IE; with data compression)
9600bps
Standards: V.22, Bell 212A, and Bell 103
Transmission Line:
Dial
Compatibility: Hayes Extended AT command set
Power Supply: 48VAC/DC to 220VAC/DC
(Optional 9-36VDC)
Power Connector: 4-ft AC Cord with 3-pin screw
terminal connector included
Case size:
5-3/8” x 4” x 1-3/8”
Digital Port:
RS232 withDB9 connector
Analog Port:
RJ11 Modular Jack
Surge Protection: (power line) 8kV [exceeds IEC801-4] (20kV {IE801-5}
available if required)
Surge Protection:
3.75VAC
Environment:
-40˚C to +85˚C, 0 to 95% humidity
(non-condensing)
Certifications:
FCC Part 68, Industry Canada
123
DATA CONNECT ENTERPRISE
PHONE: 301.924.7400 EXT 17
3405 OLANDWOOD CT
FAX: 301.924.7403
OLNEY, MD 20832
USA
www.data-connect.com
INDUSTRIAL SOLUTIONS
NETWORK ANYWHERE
INDUSTRIAL MODEMS
MAIN MODEM CHART
124
DCE MIU-PP2.4
FEATURES
To service the growing need for efficient, reliable data communication in a harsh environmental of utility substations and industrial
facilities, has developed a 2400bps modem that can operate from
various AC/DC power supplies and survive high surge levels and
extreme heat and cold. All this without compromising the performance expected from state-of-the-art communications devices.
With the rapid move toward “intelligent” substation, where meters
relays, RTU’s, SCADA system, etc are able to “talk” to a remote operator, communication devices such as modems moving off the
desktop and into the field, where the convenience of 115VAC power
outlets and climate control are usually hard to find.
Data Connect Enterprise has addressed this problem by developing the PowerPort-MIU2.4 series modem designed specifically for
harsh environments.
The PowerPort-MIU2.4 series modem is highly sophisticated full
duplex, V.22 data modem that designed to interface with RS232,
RS485 (external device), 5V logic (TTL) or simple send and receive
signals The PowerPortMiu2.4 series modem operates on a dial-up
system.
The PowerPort-MIU2.4 series modem is powered from unique
power supply that enables it to operate on any AC or DC voltage
ranging from 48V to 240V. A low voltage version (9-36VDC) is also
available. The PowerPortMIU2.4 modem is designed to work in temperatures from 40˚C to 85˚C and is surge protected on both the
power and analog lines.
The PowerPort-MIU2.4 series modem is bundled in a 5-3/8” x 13/8” non-metallic enclosure, suitable for desktop or wall mounting.
Also see our Data sheets on the MIU/power-port low voltage modems, the “Myriad” Rack Mount Modem, MIU202T (Bell), MIU9.6FPD,
MIU14.4, and MIU28.8 modems.
ORDERING INFORMATION
DCE/MIU-PP2.4
thru DB25
V.22 2.4Kbps2-Wire Dial Modem with 5VDC Power
Modem Interface Units AC/DC Powered
Substation Hardened Communication Interface Units
2.4kbps 2-wire Dial Modem
Powered through the RS232 (DB25) data interface port or External
Jack
(Optional 7-16VDC available)
Automatic “Power Down” when inactive
IEC801-4 Surge Protection
-40˚C to +85˚C Operating Temperature
Hayes AT compatible
SPECIFICATIONS
Modem Line Speeds:
Asynchronous 2400, 1200, 300bps
DTE Rates: Above modem line speeds (IE; with data compression)
9600bps
Standards: V.22, Bell 212A, and Bell 103
Transmission Line:
Dial
Compatibility: Hayes Extended AT command set
Powered through the RS232 (DB25) data
interface port or external jack (optional 7-16VDC
available)
Case size:
5-3/8” x 4” x 1-3/8”
Digital Port:
RS232 withDB9 connector
Analog Port:
RJ11 Modular Jack
Surge Protection: (power line) 8kV [exceeds IEC801-4] (20kV {IE801-5}
available if required)
Surge Protection: 3.75VAC
Environment:
-40˚C to +85˚C, 0 to 95% humidity
(non-condensing)
Certifications:
FCC Part 68, Industry Canada
124
DATA CONNECT ENTERPRISE
PHONE: 301.924.7400 EXT 17
3405 OLANDWOOD CT
FAX: 301.924.7403
OLNEY, MD 20832
USA
www.data-connect.com
INDUSTRIAL SOLUTIONS
NETWORK ANYWHERE
INDUSTRIAL MODEMS
MAIN MODEM CHART
125
DCE MD2.4
FEATURES
2.4kbps 2-wire Dial Line Modem
IEC801-4 Surge Protection
-20˚C to +85˚C Operating Temperature
For Meters, Relays, SCADA, etc.
MD2.4 SPECIFICATIONS
Modem Line Speeds
DTE Rate
Standards
Transmission Line
Compatibility
Digital Port
Analog Port
Surge Protection
The Data Connect MD2.4 is the Rack-mount version of the Data
Connect MIU2.4. The same functionally that can be found in the
MIU28.8 can be found in the MD14.4L.
The Data Connect MD2.4is a Bell V.22 modem designed for
asynchronous operation at 0 to 2400bps over voice grade lines.
The modem is intended for use on 2-wire or 4-wire leased lines.
The MD2.4 is comprised of MDMC carrier card and PE14.4 module. Up to 18 MD28.8 can be front loaded into MDR Modem Bank.
The MDR Modem Bank is an industrial grade 19” X 3U rack
mountable chassis. MDR Modem Bank is powered from a wide
range of AC and DC voltages. Two power supply cards can be
installed to provide automatic back up in the event the primary
power supply fails. The MDR will operate in temperatures from 20˚C to + 85˚C and is surge protected on both power analog lines.
Two power supply slots are provided. Power supply cards are
available for any voltage in the range 9-150VDC and 9-275VAC. A
single power supply card will power all 18 MD28.8. In additional to
the MD28.8 the MDR Modem Bank also houses the MD14.4L,
MD14.4, MD9.6FPD, and MD202T.
Surge Protection
Environment
Certifications
Asynchronous 2400, 1200, 300bps
Above modem line speeds (IE;
with data compression
9.6kbps
V.22, Bell 212A, Bell 103
2-wire dial
Hayes Extended AT Command Set
RS232 with DB9 Connector
RJ11Modular Jack
(Power Line) 8kV [Exceeds
IEC801-4] (20kV {IE801-5}
(available if required)
3.75VAC
-40˚C to + 85˚C, 0 to 95%
humidity (non-condensing)
FCC Part 68, Industry Canada
ORDERING INFORMATION
DCE/MD2.4
V.22 2.4Kbps2-Wire Dial Rackmount Modem
125
DATA CONNECT ENTERPRISE
PHONE: 301.924.7400 EXT 17
3405 OLANDWOOD CT
FAX: 301.924.7403
OLNEY, MD 20832
USA
www.data-connect.com
INDUSTRIAL SOLUTIONS
NETWORK ANYWHERE
INDUSTRIAL MODEMS
MAIN MODEM CHART
126
DCE MDR
FEATURES
The Data Connect MDR Modem Chassis is designed to house
eighteen (18) DCE MD Modem Cards and two (2) DCE MDP Power
Supplies. The DCE MDR Modem Chassis is hardened industrial
grade, 19” wide, 3U height (5.25”H), and constructed heavy gauge
steel with plating for corrosion resistance.
The DCE MD Modem Cards are comprised of a DCE MDMC Modem
Carrier Card and a DCE PE OEM Card. The DCE MD202T (Bell 202T),
MD9.6FPD (Proprietary), MD2.4 (V.22), MD14.4 (V.32bis), MD14.4L
(V.32bis), and MD28.8 (V.34) operate within the DCE MDR Modem
Chassis and are hot-swappable. Any mix of the DCE MD modems
can be utilized simultaneously.
Two (2) DCE MDP Power Supplies Cards provide full redundancy
and are available for any voltage in the range of 9-150VDC and 9275VAC. A single DCE MDP Power Supply Card powers eighteen
(18) Modem Cards. A second DCE MDP Power Supply Card, if installed, provides automatic backup in the event of a failure of the
primary DCE MDP Power Supply Card.
18 Modem Slots
Dial & Leased Line Modems
V.22, 202T, 9.6FPD, V.32bis, V.34
Hayes AT Compatibility
Full Array of LEDs
Standard 19” x 5.25” (3U) Euro-Chassis
AC or DC Power from 9 to 300VAC or VDC
Dual Power Supplies with Full Redundancy
Ideal for SCADA Master Stations
SPECIFICATIONS
EIA Standards
Compliant with EIA Standard EIA-310-C
Modem Interface Connectors (Rear)
Serial RS232: DB25F
Analog Port: RJ11
LEDs (Front)
(Top to bottom)
DTR: Data Terminal Ready
TXD: Transmit Data
RXD: Receive Data
MR: Modem Ready
CD: Carrier Detect
RTS: Request to Send
CTS: Clear to Send
RI: Ring Indicator
Power Requirements
AC Power: 9 to275VAC – Fused Socket (IEC 320)
DC Power: 9 to 150VDC – Screw Terminals – 9 to 150VDC
Dimensions
Width: 19”
Depth:
Height: 5.25” (3U)
Environmental
Operating Temperature: -20 to +85 Degrees Celsius
126
DATA CONNECT ENTERPRISE
PHONE: 301.924.7400 EXT 17
3405 OLANDWOOD CT
FAX: 301.924.7403
OLNEY, MD 20832
USA
www.data-connect.com
INDUSTRIAL SOLUTIONS
NETWORK ANYWHERE
INDUSTRIAL MODEMS
MAIN MODEM CHART
127
DCE PE2.4
To service the growing need for efficient, reliable data communication in harsh environments of utility substations and industrial facilities, DCE has developed a series of OEM PCB modems that can operate at 5V logic (TTL) or simple send and receive signals and survive
high surge levels and extreme heat and cold. All this without compromising the performance expected from state-of-the-art communication
devices. With the rapid move toward “intelligent” substations, where
meters, relays, RTUs, SCADA systems, etc. are able to “talk” to a remote operator, communication devices such as modems are moving
off the desktop and into the meters, RTUs, and SCADA units where the
conveniences of a standalone modem is unacceptable. Data Connect Enterprise has addressed this problem by developing
the PE2.4, 9.6FPD, 14.4, 14.4L, 202T, and 28.8 OEM modems designed
specifically for harsh environments.
The PE OEM modems are highly sophisticated full duplex, V.22bis
data modems that are designed to interface with RS232, RS485
(external device), 5V logic (TTL) or simple send and receive signals.
The PE2.4, 14.4, and 28.8 OEM modems operate at full or half duplex on
a dial up line. The PE202T, 14.4L, and 9.6FPD OPM modems operate full
or half duplex on 2 or 4 wire leased lines.
The PE OEM PECs can be found in the MIU modems, MD modem
cards, and the MIU Power Port modems.
ORDERING INFORMATION
DCE/PE2.4
2-wire dial-up PCB
FEATURES
Modem Interface Units 5V logic (TTL)
Simple send and receive signals
2400kbps 2-wire dial-up line modem
5V logic (TTL) power supply
IEC801-4 surge protection
-40°C to +85°C operating temperature
SPECIFICATIONS
PE2.4
Modem Line Speeds:
Asynchronous 2400, 1200, 300bps
Standards:
V.22bis, V.22, Bell212A, Bell 103
Transmission Line:
Dial-up
Compatibility:
Hayes Extended AT Command Set
Power:
5V logic (TTL)
127
DATA CONNECT ENTERPRISE
PHONE: 301.924.7400 EXT 17
3405 OLANDWOOD CT
FAX: 301.924.7403
OLNEY, MD 20832
USA
www.data-connect.com
INDUSTRIAL SOLUTIONS
NETWORK ANYWHERE
INDUSTRIAL MODEMS
V.23 & BELL 202 MODEM CHECK LIST
128
V.23 & BELL 202 MODEM CHECK LIST
MODEL
MAX.
SPEED
HIGH LOW
RACK
DIN SECUR- WALL
VOLT. VOLT. DIAL LEASED MOUNT MOUNT ITY MOUNT
DCE/IGV23
75BPS
X
X
X
X
X
X
129 DCE/IG202T
0-1200BPS
X
X
X
X
X
X
130 DCE/IG202T-R38
0-1200BPS
X
X
X
DCE/MIU/202T
0-1200BPS
X
X
DCE/MD202T
0-1200BPS
X
DCE/PE202T
0-1200BPS
X
135 DCE/202TE-037-4
1200BPS
X
136 DCE/202TR-037-4
1200BPS
X
PHOTO
PAGE 131 132 X
X
133 137 128
DATA CONNECT ENTERPRISE
PHONE: 301.924.7400 EXT 17
3405 OLANDWOOD CT
FAX: 301.924.7403
OLNEY, MD 20832
USA
www.data-connect.com
INDUSTRIAL SOLUTIONS
NETWORK ANYWHERE
INDUSTRIAL MODEMS
IGV.23
129
DCE IGV.23
SPECIFICATIONS
The Data Connect low speed IGV.23 Industrial Grade V.23 modem
is designed and manufactured for rugged industrial communication
networks. The IGV.23 delivers cost effective and reliable 1200bps
asynchronous solutions for point to point and multipoint connectivity.
The IGV.23 Industrial Grade V.23 modem is ideal for industrial
communication application including SCADA systems, RTUs, traffic
monitor and control, and industrial and automation networks. The
V.23 supports RTUs with switch selectable settings and no AT command set required. The IGV.23 modem is designed to operate over 4wire full duplex or 2-wire half duplex over unconditioned leased lines
or private metallic circuits. For optimum performance, the modem
employs FSK modulation to be compatible with V.23 standards,
which can communicate over a variety of transmission lines.
The IGV.23 Industrial Grade V.23 modem can operate over a wide
range of AC or DC power supply voltages and temperatures. With
Proven reliability and ease of installation the V.23 is ideal for point-to
-point and point-to-multipoint polling networks, where reliability and
low-network latency are critical for system performance. With its
Auto-RTS mode, the modem can support DTE/RTUs with 3-wire serial
interface (TD, RD, and SG) in point-to-point and multi-point polling
applications.
The IGV.23 industrial grade V.23 modem has selectable EIA RS232/V.24 and RS-485 DTE support. It also features built-in diagnostics for local and remote testing. The configuring and options on the
IG202T is provided by DIP switches and jumpers, eliminating the
need for an AT command set. The IGV.23 has heavy-duty surge protection at the power supply and leased line inputs. IGV.23 also uses
an isolated DC to DC power converter for protecting critical DC or
battery power systems.
DATA RATE SUPPORT:
Data Speed 0-1200 bps in V.23 mode Data Format Asynchronous,
transparent character format (10 or 11-bit character with 1 or 2 stop
bits)
MODULATION:
Frequency Shift Key (FSK)
V.23 Mode:
Mark 1300 Hz
Space 2100 Hz
Soft Carrier 900 Hz
TRANSMISSION LINE INTERFACE:
Leased Line TELCO voice band 2 or 4 –wire leased lines Private or
metallic circuits 2 or 4 –wire, 19-26 AWG Connector: 4 PIN RJ-11C
modular jack
Transmitter output level: 0 to -12dbm, selectable
DTE/RTU Interface:
The modem provides serial ports to support either the RS-485 Interface standards RS-232 INTERFACE: Connector: D9-F Signals: RTS,
CTS, CD, TD, RD, DSR, and SG
RS-485 INTERFACE:
Connector: RJ-11CSignals: 4-wire full-duplex
TX+, TX-, RX+, RXFRONT PANEL INDICATORS & CONTROL S:
RTS, CTS, TD, CD, RD, MR, ALB, DLB TEST Switch: Push Button for
Analog Loopback, Digital Loopback
AC & DC POWER SUPPORT:
Standalone: 10-48 VDC: 85-400 VDC, 100-240 VAC
Rack mount module: plug-in RM16M modem rack
POWER + CURRENT CONSUMPTION:
75 Ma @ 12 VDC
18 Ma @ 48VDC
MECHANICAL:
Enclosure dimensions:
4.1” (W) x 4.9” (L) x1.4” (H)
104mm (W) x 125mm (L) x36mm (H)
weight: 0.51lbs, without AC power module
ENVIRONMENT:
Operation: -40 Degrees Celsius to + 85 Degrees Celsius
Storage: -40 Degrees Celsius to + 85 Degrees Celsius
ORDERING INFORMATION
DCE/IGV.23
DCE/IGV.23-DC
DCE/IGV.23-HV
DCE/IGV.23-RM
DCE/IGV.23-WMB
DCE/IGV.23-DIN
STANDALONE (100-240 VAC)
STANDALONE (10-48 VDC)
STANDALONE (100-240 VAC, 85-400 VDC)
RM16M RACKMOUNT MODULE
WALL-MOUNT/PANEL-MODULE
DIN-MOUNT KIT
129
DATA CONNECT ENTERPRISE
PHONE: 301.924.7400 EXT 17
3405 OLANDWOOD CT
FAX: 301.924.7403
OLNEY, MD 20832
USA
www.data-connect.com
INDUSTRIAL SOLUTIONS
NETWORK ANYWHERE
INDUSTRIAL MODEMS
IG202T
130
DCE IG202T
SPECIFICATIONS
The Data Connect low speed IG202T Industrial Grade Bell 202
modem is designed and manufactured for rugged industrial communication networks. The IG202T delivers cost effective and reliable 1200bps asynchronous solutions for point to point and multipoint connectivity.
The IG202T Industrial Grade Bell 202 modem is ideal for industrial communication application including SCADA systems, RTUs,
traffic monitor and control, and industrial and automation networks.
The IG202T supports RTUs with switch selectable settings and no
AT command set required. The IG202T modem is designed to operate over 4-wire full duplex or 2-wire half duplex over unconditioned
leased lines or private metallic circuits. For optimum performance,
the modem employs FSK modulation to be compatible with Bell 202
standards, which can communicate over a variety of transmission
lines.
The IG202T Industrial Grade Bell 202 modem can operate over a
wide range of AC or DC power supply voltages and temperatures.
With Proven reliability and ease of installation the IG202T is ideal
for point-to-point and point-to-multipoint polling networks, where
reliability and low-network latency are critical for system performance. With its Auto-RTS mode, the modem can support DTE/RTUs
with 3-wire serial interface (TD, RD, and SG) in point-to-point and
multi-point polling applications.
The IG202T industrial grade Bell 202 modem has selectable EIA
RS-232/V.24 and RS-485 DTE support. It also features built-in diagnostics for local and remote testing. The configuring and options on
the IG202T is provided by DIP switches and jumpers, eliminating the
need for an AT command set. The IG202T has heavy-duty surge
protection at the power supply and leased line inputs. IG202T also
uses an isolated DC to DC power converter for protecting critical
DC or battery power systems.
DATA RATE SUPPORT:
Data Speed 0-1200 bps in Bell 202T mode Data Format Asynchronous, transparent character format (10 or 11-bit character with 1 or
2 stop bits)
MODULATION:
Frequency Shift Key (FSK)
Bell 202 Mode: Mark 1200 Hz
Space 2200 Hz
Softt Carrier 900 Hz
TRANSMISSION LINE INTERFACE:
Leased Line TELCO voice band 2 or 4 –wire leased lines Private or
metallic circuits 2 or 4 –wire, 19-26 AWG Connector: 4 PIN RJ-11C
modular jack
Transmitter output level: 0 to -12dbm, selectable
DTE/RTU Interface:
The modem provides serial ports to support either the RS-485
Interface standards RS-232 INTERFACE: Connector: D9-F Signals:
RTS, CTS, CD, TD, RD, DSR, and SG
RS-485 INTERFACE:
Connector: RJ-11CSignals: 4-wire full-duplex
TX+, TX-, RX+, RXFRONT PANEL INDICATORS & CONTROL S:
RTS, CTS, TD, CD, RD, MR, ALB, DLB TEST Switch: Push Button
for Analog Loopback, Digital Loopback
AC & DC POWER SUPPORT:
Standalone: 10-48 VDC: 85-400 VDC, 100-240 VAC
Rack mount module: plug-in RM16M modem rack
POWER + CURRENT CONSUMPTION:
75 Ma @ 12 VDC
18 Ma @ 48VDC
MECHANICAL:
Enclosure dimensions:
4.1” (W) x 4.9” (L) x1.4” (H)
104mm (W) x 125mm (L) x36mm (H)
weight: 0.51lbs, without AC power module
ENVIRONMENT:
Operation: -40 Degrees Celsius to + 85 Degrees Celsius
Storage: -40 Degrees Celsius to + 85 Degrees Celsius
Humidity: up to 95% non-condensing
ORDERING INFORMATION
DCE/IG202T
DCE/IG202T-DC
DCE/IG202T-HV
DCE/IG202T-RM
DCE/IG202T-WMB
DCE/IG202T-DIN
STANDALONE (100-240 VAC)
STANDALONE (10-48 VDC)
STANDALONE (100-240 VAC, 85-400 VDC)
RM16M RACKMOUNT MODULE
WALL-MOUNT/PANEL-MODULE
DIN-MOUNT KIT
130
DATA CONNECT ENTERPRISE
PHONE: 301.924.7400 EXT 17
3405 OLANDWOOD CT
FAX: 301.924.7403
OLNEY, MD 20832
USA
www.data-connect.com
INDUSTRIAL SOLUTIONS
NETWORK ANYWHERE
INDUSTRIAL MODEMS
IG202T-R38
131
DCE IG202T-R38
SPECIFACTIONS
The Data Connect IG202T-R38 is Bell 202 frequency shift key
(FSK) and quadrature amplitude modulation (QAM) modem for asynchronous and synchronous data transmission in 300-3400 Hz voice
band. It is highly immune to interference and noise and permits extensive voice-band communication link utilization.
The modem supports several international standards ITU V.21,
V.23, R.35, R.37, R.38A, R38B, v.29, Bell 103, Bell 202 and propriety
Cegelec 1200/600Bd and Indactic 33 communication standards.
The modem can operate in half or full-duplex, point-to-point or
point-to-multipoint mode when using FSK modulation the receive
and transmit channels may be independently set.
The modem employs advanced DSP technology, thus offering
high service flexibility through programmable features. Software
configuration is performed via Hayes AT command set. AT commands can be initiated from any terminal application using and RS232 communication interface. Additionally, for easy firmware upgrade a bootstrap loader is provided.
The modem features programmable modem capability for SCADA
or power utility communication networks. It can support a range of
standards including ITUR.35, R.37, R.38A, R.38B, V.21, V.23, Bell 103,
and Bell 202. It is fully programmable via Hayes AT command set.
The modem also features specialized line, power line carrier, or radio
communication, as well as half or full-duplex operating modes.
The IG202T-R38 is designed for use in SCADA systems mainly
based upon power utility communication networks. Depending on
modulation standards it can communicate through specialized, private or leased lines, radio links and power lines (PLC)
The IG202T-R38 is available as a desktop modem or in two different types standard 19” rack, including: 1U rack with 1, 2, or 3 modems per rack;
3U rack with 10, 12 or 14 modems per rack, with
additional blank front plates covering unused slots. All connectors at
the rear side are accessible at the back openings. ORDERING INFORMATION
DCE/IG202T-R38-DC-12
DCE/IG202T-R38-DC-24
DCE/IG202T-R38-DC-48
DCE/IG202TRM-R38
MODULATION
FSK
ITU R.35
ITU R.37
ITU R.38B
ITU R.38A
ITU V.21
ITU V23/1/2
Bell 103
Bell 202
QAM
ITU V29
STANDALONE (9-18 VDC)
STANDALONE (18-36 VDC)
STAMDALONE (25-50 VDC)
RACKMOUNT MODEM
TRANS. RATE
Bd
50
100
200
200/300
300
600/1200
300
1200
TRANS.RATE
Bps
4800
7200
9600
Operation Type
Data Transmission on audio frequency analog medium
Media - Leased line, radio, PLC
Modes - asynchronous or synchronous, point-to-point, 2-wire or 4-wire
-support for synchronous Indactic 33 protocol.
INTERFACES
DTE Interface - RS-232C, DB (female) connector
Signals:
DCD, RD, TD, DTR, SG, DSR, RTS, CTS, RI
Character length:
5-9 data bits, 1 start & 1 stop
RTS/CTS delay:
adjustable by 1ms step within range of 40-6825ms
option to transmit on RTS
Configuration:
AT command set
ANALOG LINE
DB15 (female) connector
-600Ω or high impedance with return loss <0.2
Transmission level: 0 to -32dBM, programmable by 1dBstep
Receive level: 0 to -36dBM, programmable by 1 dB step, min. -48dBM
Radio control: half duplex control squelch detection
POWER SUPPLY:
2-position screw plug type (for 2-2.5mm 2 wire)
GENERAL LED INDICATION POWER SUPPLY:
PWR, TXD, RXD, RTS, RTS, DCD
9- 18VDC, 9-12VAC, model 12
18-36VDC, 14-23VAC, model 24
36-72VDC, 25-50VAC, model 48
ISOLATION IMMUNITY to NOISE
Transformer up to 1500V
Peak pulse noise: 100v Peak
Effective interference at 50 Hz: 80V rms
TEMPERATURE DIMENSIONS
Operation and storage: -10 to 50 °C
desktop: aluminum enclosure 11x30x170mm
19” rack: EUROCARD PCB, 160x100mm 3HE, 6T in 1U and 3U rack
FREQ. DEVN.
Hz
±30
±60
±90
±120
±100
±200/400
±100
±500
SYM. RATE
CHANL. SPACE.
Hz
120
240
360
480
400
800/1600
400
2000
CONST. PT.
2400
2400
2400
4
8
16
LOW FREQ
Hz
420
480
540
600
CARE.FREQ.
Hz
1700
1700
1700
HIGH FREQ
Hz
3300
3120
3060
3000
1080/1750
1500/1700
1170/2125
1700
MODE
half duplex
half duplex
half duplex
131
DATA CONNECT ENTERPRISE
PHONE: 301.924.7400 EXT 17
3405 OLANDWOOD CT
FAX: 301.924.7403
OLNEY, MD 20832
USA
www.data-connect.com
INDUSTRIAL SOLUTIONS
NETWORK ANYWHERE
INDUSTRIAL MODEMS
MIU-202T
132
DCE MIU-202T
SPECIFICATIONS
Bell 202T continues to be the standard of choices in many utility
and industrial multi-drop data communications applications. The
Data Connect Enterprise MIU202T can be powered from a wide range
of DC and AC voltages, is surge protected on both the power and
analog lines, and will operate in extreme heat and cold. Ideal for multi
-drop applications over leased lines and private lines.
The MIU202T is a Bell Standard 202T modem designed for asynchronous operation at 0 to 1200 bps over voice grade lines and pilot
wires. The modem is intended for use on leased lines and private
lines and provides half-duplex communications on 2-wire lines, or
full-duplex on 4-wire.
Most modem manufactures have abandoned the Bell 202T in favor
of the much higher speed modulation preferred in dial-up systems.
However, Bell 202T remains the standard of choice in many utility
and industrial applications where relatively small amounts of data
are to be transmitted in multi-point networks.
To meet this continued demand, Data Connect Enterprise has
added the MIU202T to its range of Communications Interface Units
(see separate brochure).
The MIU202T can be powered from any AC or DC voltage in the
range of 48V to 220V.A 9-36VDC version is also available. It is designed to work extended temperatures ranging from -40C to +80 C,
and its surge protected to 8kV, double the voltage requirements of
IEC801-4 standard.
All of this is bundled in a 5-3/8“x 4” x 1-3/8,’ non metallic enclosure, suitable for desktop or wall mounting. Rack mount cards are
also available for Data Connect Enterprise “Myriad” system (see
separate brochure)
Data Rate:
Asynchronous 0-1200bps over voice grade leased or pilot lines
Modulation:
Bell 202T
Operation: phase coherent, (FSK)
Full duplex over 4-wire leased or private lines
Half duplex over 2-wire leased or private lines
(constant or switched carrier, Dip Switch selectable)
Power supply: 48VAC/DC (Optional 9- 36VDC)
Power consumption:
15mA @ 48VD; 7.5mA @ 115CDV; 7.5mA @ 125VDC
Digital Port:
RS232 with DB9 Connector
Analog Port:
RJ11
Power connector:
3-pin with screw terminals for customer supplied cable
Case Size:
5-3/8” x 4” x 1-3/8”
Surge protection:
(Power Line) - 8kV [Exceeds IEC801-4]
Surge protection:
(Analog Line) - 3.75kVac
Operation equipment
-40 C to +85 C, 0 to 95% humidity (non-condensing)
Carrier Frequencies:
Bell 202T…
Mark:
1200Hz ± 0.1%
Space: 2200Hz ± 0.1% FEATURES
0-1200 bps, leased AC/DC powered substation hardened Bell 202T
0-1200 bps over voice grade leased lines
Point-to-point or multi-point
48 to 220V AC/DC Power Supply
9-36VDC optional power supply
IEC901-4 surge protection
-40 C to +85 C operating Temp.
For meters, RTUs, SCADA, etc.
ORDERING INFORMATION
DCE/MIU-202T
BELL 202 1.2Kbps Leased Line Modem
DCE/MIU-202T-LV BELL 202 1.2Kbps Leased Line Modem Low
Voltage
132
DATA CONNECT ENTERPRISE
PHONE: 301.924.7400 EXT 17
3405 OLANDWOOD CT
FAX: 301.924.7403
OLNEY, MD 20832
USA
www.data-connect.com
INDUSTRIAL SOLUTIONS
NETWORK ANYWHERE
INDUSTRIAL MODEMS
MD202T
133
DCE MD202T
SPECIFICATIONS
The Data Connect MD202T is the rack-mount version of The Data
Connect MIU202T. The same functionally that can be found in the
MIU202T can be found in the MD202T.
The Data Connect MD202T is a Bell 202T modem designed for asynchronous operation at 0 to 1200bps over voice grade lines and pilot
wires. The modem is intended for use on leased lines or private lines
and provides half duplex communications on 2 wire lines, or full duplex
on 4-wire lines.
The MD202T is comprised of MDMC carrier card and PE202T module. Up to 18 MD202T can be front loaded into a MDR Modem Bank. The
MDR Modem Bank is an industrial grade 19” x 3U rack mountable chassis. The MDR Modem Bank is powered from a wide range of AC or DC
voltages. Two power supply cards can be installed to provide automatic back up in the event the primary power supply fails. The MDR will
operate in temperatures from -20 C to +85 C and is surged protected
on both power and analog lines.
Two power supply slots are provided. Power supply cards are available for any voltage in the range 9- 150VDC and 9-275VAC. A single
power supply card will power all 18 MD202T.
In addition to the MD202T the MDR Modem Bank also houses the
MD28.8, MD14.4, MD14.4L, and MD9.6FPD.
Data Rate:
Asynchronous· 9-1200 bps over voice grade leased lines or pilot
wires
Modulation:
Bell 202T
Phase coherent, Frequency Shift Keyed (FSK)
Operation:
Full duplex over 4-wire leased lines or private lines
Half duplex over 2-wire leased or private lines “
(Constant or Switched Carrier, DIP Switch Selectable)
Digital Port:
RS232 with DB9 Connectors
Analog Port:
RJ11
Surge Protection:
(Power Line): 8kV [Exceeds IEC801-4]
Surge Protection:
(Analog Line): 3.75Vac
Operating Equipment:
-20 C to + 85 C, 0 to 95% humidity (non-condensing)
Carrier Frequencies:
Bell 202T…
Mark:
1200Hz ± 0.1%
Space:
1200Hz ± 0.1%
Line Independence:
600 ohms
Anti streaming:
45 seconds or more
Transmitter Output Level:
0 or -10dBm
Receive Sensitivity:
-33 or -43dBm
RTS/CTS delay:
1, 12, 35, or 50msec
Carrier Detect Delay:
8.5msec
Soft Carrier Turnoff:
8.3msec
Test Features:
Analog Loopback
FEATURES
ORDERING INFORMATION
DCE/MD2O2T
BELL 202 1.2Kbps Rackmount Modem
0-1200bps, leased lines AC/DC powered Bell 202T
0-1200bps over voice grade leased lines
Point-to-point or multipoint
IEC901-4 Surge Protection
-20 C to +85 C
for meters RTUs, SCADA, etc.
133
DATA CONNECT ENTERPRISE
PHONE: 301.924.7400 EXT 17
3405 OLANDWOOD CT
FAX: 301.924.7403
OLNEY, MD 20832
USA
www.data-connect.com
INDUSTRIAL SOLUTIONS
NETWORK ANYWHERE
INDUSTRIAL MODEMS
MDR
134
DCE MDR
FEATURES
The Data Connect MDR Modem Chassis is designed to house
eighteen (18) DCE MD Modem Cards and two (2) DCE MDP Power
Supplies. The DCE MDR Modem Chassis is hardened industrial
grade, 19” wide, 3U height (5.25”H), and constructed heavy gauge
steel with plating for corrosion resistance.
The DCE MD Modem Cards are comprised of a DCE MDMC Modem
Carrier Card and a DCE PE OEM Card. The DCE MD202T (Bell 202T),
MD9.6FPD (Proprietary), MD2.4 (V.22), MD14.4 (V.32bis), MD14.4L
(V.32bis), and MD28.8 (V.34) operate within the DCE MDR Modem
Chassis and are hot-swappable. Any mix of the DCE MD modems
can be utilized simultaneously.
Two (2) DCE MDP Power Supplies Cards provide full redundancy
and are available for any voltage in the range of 9-150VDC and 9275VAC. A single DCE MDP Power Supply Card powers eighteen
(18) Modem Cards. A second DCE MDP Power Supply Card, if installed, provides automatic backup in the event of a failure of the
primary DCE MDP Power Supply Card.
18 Modem Slots
Dial & Leased Line Modems
V.22, 202T, 9.6FPD, V.32bis, V.34
Hayes AT Compatibility
Full Array of LEDs
Standard 19” x 5.25” (3U) Euro-Chassis
AC or DC Power from 9 to 300VAC or VDC
Dual Power Supplies with Full Redundancy
Ideal for SCADA Master Stations
SPECIFICATIONS
EIA Standards
Compliant with EIA Standard EIA-310-C
Modem Interface Connectors (Rear)
Serial RS232: DB25F
Analog Port: RJ11
LEDs (Front)
(Top to bottom)
DTR: Data Terminal Ready
TXD: Transmit Data
RXD: Receive Data
MR: Modem Ready
CD: Carrier Detect
RTS: Request to Send
CTS: Clear to Send
RI: Ring Indicator
Power Requirements
AC Power: 9 to275VAC – Fused Socket (IEC 320)
DC Power: 9 to 150VDC – Screw Terminals – 9 to 150VDC
Dimensions
Width: 19”
Depth:
Height: 5.25” (3U)
Environmental
Operating Temperature: -20 to +85 Degrees Celsius
134
DATA CONNECT ENTERPRISE
PHONE: 301.924.7400 EXT 17
3405 OLANDWOOD CT
FAX: 301.924.7403
OLNEY, MD 20832
USA
www.data-connect.com
INDUSTRIAL SOLUTIONS
NETWORK ANYWHERE
INDUSTRIAL MODEMS
PE202T
135
DCE PE202T
To service the growing need for efficient, reliable data communication in harsh environments of utility substations and industrial facilities, DCE has developed a series of OEM PCB modems that can operate at 5V logic (TTL) or simple send and receive signals and survive
high surge levels and extreme heat and cold. All this without compromising the performance expected from state-of-the-art communication
devices. With the rapid move toward “intelligent” substations, where
meters, relays, RTUs, SCADA systems, etc. are able to “talk” to a remote operator, communication devices such as modems are moving
off the desktop and into the meters, RTUs, and SCADA units where the
conveniences of a standalone modem is unacceptable. Data Connect Enterprise has addressed this problem by developing
the PE2.4, 9.6FPD, 14.4, 14.4L, 202T, and 28.8 OEM modems designed
specifically for harsh environments.
The PE OEM modems are highly sophisticated full duplex, V.22bis
data modems that are designed to interface with RS232, RS485
(external device), 5V logic (TTL) or simple send and receive signals.
The PE2.4, 14.4, and 28.8 OEM modems operate at full or half duplex on
a dial up line. The PE202T, 14.4L, and 9.6FPD OPM modems operate full
or half duplex on 2 or 4 wire leased lines.
The PE OEM PECs can be found in the MIU modems, MD modem
cards, and the MIU Power Port modems.
ORDERING INFORMATION
DCE/PE202T
2/4-WIRE LEASED LINE PCB
FEATURES
Modem Interface Units 5V logic (TTL)
Simple send and receive signals
1200kbps 2/4-Wire Leased Line modem
5V logic (TTL) power supply
IEC801-4 surge protection
-40°C to +85°C operating temperature
SPECIFICATIONS
Modem Line Speeds:
0-1200bps
Standard:
Bell 202T
Transmission Line:
4-wire or leased lines
Compatibility:
Hayes Extended AT Command Set
135
DATA CONNECT ENTERPRISE
PHONE: 301.924.7400 EXT 17
3405 OLANDWOOD CT
FAX: 301.924.7403
OLNEY, MD 20832
USA
www.data-connect.com
INDUSTRIAL SOLUTIONS
NETWORK ANYWHERE
INDUSTRIAL MODEMS
202TE-037-4
136
DCE 202TE-037-4
SPECIFACTIONS
For years the Bell 202 modem has delivered reliable low speed multipoint communications. Today, this device still enjoys great popularity
due to its ability to communicate under adverse conditions. The Bell
202 remains the right choice for telemetry applications, control systems, transaction applications, and for reliable data delivery over RF or
cellular connections.
The Data Connect ST202TE series offers a modem implementation
of this classic modulation standard. In this design, we have utilized the
latest semiconductor technology to guarantee a level of performance
and reliability that cannot be matched by older designs.
The industrial-rated Data Connect ST202TE is housed in metal enclosures and is built too meet the most stringent criteria. Temperature
ratings, for example, range from -40 C to +85 C. versatile power supply
options will meet most industrial application.
The ST202TE series was designed, however, to allow implementation of a wide variety of OEM applications. Like all Data Connect designs, it is microcontroller based so that it may support custom interfaces and protocols. In addition, the line interface of the ST202TE series is capable of supporting, either leased circuits, dial circuits or
short hall twist pair.
The ST202TE series is available in our standalone or rack mount
configuration. In addition, this device is available at the board level for
OEM applications
FEATURES
Compatible with all standards Bell 202S or 202T modems. Engineered and manufactured to standards with metal enclosure.
Easy to configure
4-Wire leased line (202T) 2-wire leased line (202S)
Compatibility:
Bell 202S, Bell 202T
DTE Interface:
RS-232C (V.24) 0-1800bps.
Configuration Control:
Parameters set through switches
Line Interface:
Standard 4-wire leased
Standard 2-wire leased
optional 2-wire dial.
Line Diagnostic:
DTE and modem generated test patterns
Local Analog Loopback
Local Digital Loopback
Remote Digital Loopback
Transmit Power:
Adjustable in 2db increments from 0dBmthrough -14dBm
Power:
Standalone Unit-Automatically adjust 9Vac or 9-14VDC
Power Supply Options- 5.5-14VDC, 18-75VDC, 66-160VDC
Rack mount - Standard CC-2016 rack automatically adjust to 85265VAC, 27-440Hz. Optional DC Supply, automatically adjusts to
positive or negative 36-75VDC
Operating Environment: -40 C to +85 C
Humidity – 95% non-condensing
Approvals:
FCC part 68 & part 15, Class A optional international approval are
available.
Physical:
Standalone Units- Dimensions 6.19”L x 5.12”W x 1.75 “H
Weight 30oz. (metal enclosure)
Rack mount Unit- Fits ST-2016 Rack.
4.73” L x 4.60”W x .80H
Weight: 9oz
ORDERING INFORMATION
DCE/202TE-037-4 BELL 202 1.2Kbps Leased Line Modem
DCE/202TR-037-4 BELL 202 1.2Kbps Leased Line Rackmount
Modem
136
DATA CONNECT ENTERPRISE
PHONE: 301.924.7400 EXT 17
3405 OLANDWOOD CT
FAX: 301.924.7403
OLNEY, MD 20832
USA
www.data-connect.com
INDUSTRIAL SOLUTIONS
NETWORK ANYWHERE
INDUSTRIAL MODEMS
202TR-037-4
137
DCE 202TR-037-4
SPECIFACTIONS
For years the Bell 202 modem has delivered reliable low speed multipoint communications. Today, this device still enjoys great popularity
due to its ability to communicate under adverse conditions. The Bell
202 remains the right choice for telemetry applications, control systems, transaction applications, and for reliable data delivery over RF or
cellular connections.
The Data Connect ST202TE series offers a modem implementation
of this classic modulation standard. In this design, we have utilized the
latest semiconductor technology to guarantee a level of performance
and reliability that cannot be matched by older designs.
The industrial-rated Data Connect ST202TE is housed in metal enclosures and is built too meet the most stringent criteria. Temperature
ratings, for example, range from -40 C to +85 C. versatile power supply
options will meet most industrial application.
The ST202TE series was designed, however, to allow implementation of a wide variety of OEM applications. Like all Data Connect designs, it is microcontroller based so that it may support custom interfaces and protocols. In addition, the line interface of the ST202TE series is capable of supporting, either leased circuits, dial circuits or
short hall twist pair.
The ST202TE series is available in our standalone or rack mount
configuration. In addition, this device is available at the board level for
OEM applications
Compatibility:
Bell 202S, Bell 202T
DTE Interface:
RS-232C (V.24) 0-1800bps.
Configuration Control:
Parameters set through switches
Line Interface:
Standard 4-wire leased
Standard 2-wire leased
optional 2-wire dial.
Line Diagnostic:
DTE and modem generated test patterns
Local Analog Loopback
Local Digital Loopback
Remote Digital Loopback
Transmit Power:
Adjustable in 2db increments from 0dBmthrough -14dBm
Power:
Standalone Unit-Automatically adjust 9Vac or 9-14VDC
Power Supply Options- 5.5-14VDC, 18-75VDC, 66-160VDC
Rack mount - Standard CC-2016 rack automatically adjust to 85265VAC, 27-440Hz. Optional DC Supply, automatically adjusts to
positive or negative 36-75VDC
Operating Environment: -40 C to +85 C
Humidity – 95% non-condensing
Approvals:
FCC part 68 & part 15, Class A optional international approval are
available.
Physical:
Standalone Units- Dimensions 6.19”L x 5.12”W x 1.75 “H
Weight 30oz. (metal enclosure)
Rack mount Unit- Fits ST-2016 Rack.
4.73” L x 4.60”W x .80H
Weight: 9oz
ORDERING INFORMATION
DCE/202TE-037-4 BELL 202 1.2Kbps Leased Line Modem
DCE/202TR-037-4 BELL 202 1.2Kbps Leased Line Rackmount
Modem
FEATURES
Compatible with all standards Bell 202S or 202T modems. Engineered and manufactured to standards with metal enclosure.
Easy to configure
4-Wire leased line (202T) 2-wire leased line (202S)
137
DATA CONNECT ENTERPRISE
PHONE: 301.924.7400 EXT 17
3405 OLANDWOOD CT
FAX: 301.924.7403
OLNEY, MD 20832
USA
www.data-connect.com
INDUSTRIAL SOLUTIONS
NETWORK ANYWHERE
SERIAL DATA& MODEM EXTENSION
DISTANCE CHART
138
SERIAL DATA & MODEM EXTENSION
MAX.
HIGH LOW PRIVATE RACK
DIN
WALL
SPEED VOLT. VOLT.
LINE MOUNT MOUNT MOUNT RS485
DISTANCE
DCE/IGV23
1200BPS
X
X
X
X
X
X
COPPER
10 MILES
140 DCE/IG202T
1200BPS
X
X
X
X
X
X
COPPER
10 MILES
141 DCE/IG202T-R38
1200BPS
X
X
X
COPPER
10 MILES
142 DCE/MIU/202T
1200BPS
X
X
COPPER
10 MILES
143 DCE/MD202T
1200BPS
X
COPPER
10 MILES
144 DCE/PE202T
1200BPS
X
COPPER
10 MILES
145 DCE/202TE-037-4
1200BPS
X
X
COPPER
10 MILES
147 DCE/IG96HFP
9.6KBPS
X
X
X
X
COPPER
16.1 MILES
148 DCE/DSP9612
9.6KBPS
X
X
X
X
COPPER
16.1 MILES
149 DCE/MIU9.6FPD
9.6KBPS
X
X
X
COPPER
16.1 MILES
150 DCE/MD9.6FPD
9.6KBPS
X
COPPER
16.1 MILES
151 DCE/PE9.6FPD
9.6KBPS
X
COPPER
16.1 MILES
153 DCE/MIU14.4L
14.4KBPS
X
X
X
COPPER
5 MILES
154 DCE/MIUPP14.4L 14.4KBPS
X
X
X
COPPER
5 MILES
155 COPPER
5 MILES
156 COPPER
5 MILES
158 COPPER
10.6 MILES
159 MODEL
X
X
X
X
X
PHOTO
PAGE
DCE/MD14.4L
14.4KBPS
X
DCE/PE14.4L
14.4KBPS
X
DCE/IG192HFP
19.2KBPS
X
X
X
DCE/3600LP
33.6KBPS
X
X
X
COPPER
5 MILES
160 DCE/3342LP
33.6KBPS
X
X
X
COPPER
5 MILES
161 DCE/V.3600UI
33.6KBPS
X
X
X
COPPER
10 MILES
162
DCE/SWM910A
115KBPS
FREQUENCY
HOPPING
62 MILES
163
DCE/SFM
1024KBPS
X
X
X
X
FIBER
75 MILES
164
DCE/HS-SFM
2048KBPS
X
X
X
X
FIBER
75 MILES
165
DCE/SHS-SFM
8192KBPS
X
X
X
X
FIBER
75 MILES
165
X
X
X
X
138
DATA CONNECT ENTERPRISE
PHONE: 301.924.7400 EXT 17
3405 OLANDWOOD CT
FAX: 301.924.7403
OLNEY, MD 20832
USA
www.data-connect.com
INDUSTRIAL SOLUTIONS
NETWORK ANYWHERE
SERIAL DATA& MODEM EXTENSION
IN THIS SECTION & TECHNOLOGY
139
IN THIS SECTION
TECHNOLOGY
SPEED
PAGE
ITU-T V.23 MODULATION
1200BPS
140
BELL 202 MODULATION
1200BPS
141— 147
ITU-T V.29 & DSP MODULATION
9600/19200BPS
148, 149
ITU-T V.29 & FPD MODULATION
9600BPS
150—153
ITU-T V.32BIS
14400BPS
154—158
ITU-T V.34BIS
28,800BPS
160—162
FREQUENCY HOPPING
115200BPS
163
FIBER CONVERSION
1024000 / 2048000 / 8192000BPS
164—165
TECHNOLOGY
Most Leased Line modems can be used for Serial Data Extension as Private Line, Limited distance, or Short Haul modems. Our solutions allow you to transmit serial data over copper, wireless, and fiber media and range in speed from 1200bps to 8,192,000bps and in distance from 5 to
75 miles. The modulations above 1200BPS are proprietary implementations of industry standard
technologies designed for maximum Point-to-Point and Point-to-Multipoint.
At Data Connect we offer a wide range of modem products to fit your network needs. We can
assist you in finding a solution that maximizes your investment while providing the solutions that
will benefit your customers both now and in the years to come. With the ability to match all requirements and standards, your choice becomes a wise choice and made easy by Data Connect
expertise.
139
DATA CONNECT ENTERPRISE
PHONE: 301.924.7400 EXT 17
3405 OLANDWOOD CT
FAX: 301.924.7403
OLNEY, MD 20832
USA
www.data-connect.com
INDUSTRIAL SOLUTIONS
NETWORK ANYWHERE
SERIAL DATA& MODEM EXTENSION
IGV.23
140
DCE IGV.23
SPECIFICATIONS
The Data Connect low speed IGV.23 Industrial Grade V.23 modem
is designed and manufactured for rugged industrial communication
networks. The IGV.23 delivers cost effective and reliable 1200bps
asynchronous solutions for point to point and multipoint connectivity.
The IGV.23 Industrial Grade V.23 modem is ideal for industrial
communication application including SCADA systems, RTUs, traffic
monitor and control, and industrial and automation networks. The
V.23 supports RTUs with switch selectable settings and no AT command set required. The IGV.23 modem is designed to operate over 4wire full duplex or 2-wire half duplex over unconditioned leased lines
or private metallic circuits. For optimum performance, the modem
employs FSK modulation to be compatible with V.23 standards,
which can communicate over a variety of private transmission lines
at a distance up to 10 miles.
The IGV.23 Industrial Grade V.23 modem can operate over a wide
range of AC or DC power supply voltages and temperatures. With
Proven reliability and ease of installation the V.23 is ideal for point-to
-point and point-to-multipoint polling networks, where reliability and
low-network latency are critical for system performance. With its
Auto-RTS mode, the modem can support DTE/RTUs with 3-wire serial
interface (TD, RD, and SG) in point-to-point and multi-point polling
applications.
The IGV.23 industrial grade V.23 modem has selectable EIA RS232/V.24 and RS-485 DTE support. It also features built-in diagnostics for local and remote testing. The configuring and options on the
IG202T is provided by DIP switches and jumpers, eliminating the
need for an AT command set. The IGV.23 has heavy-duty surge protection at the power supply and leased line inputs. IGV.23 also uses
an isolated DC to DC power converter for protecting critical DC or
battery power systems.
DATA RATE SUPPORT:
Data Speed 0-1200 bps in V.23 mode Data Format Asynchronous,
transparent character format (10 or 11-bit character with 1 or 2 stop
bits)
MODULATION:
Frequency Shift Key (FSK)
V.23 Mode:
Mark 1300 Hz
Space 2100 Hz
Soft Carrier 900 Hz
TRANSMISSION LINE INTERFACE:
Leased Line TELCO voice band 2 or 4 –wire leased lines Private or
metallic circuits 2 or 4 –wire, 19-26 AWG Connector: 4 PIN RJ-11C
modular jack
Private Line at a distance up to 10 miles
Transmitter output level: 0 to -12dbm, selectable
DTE/RTU Interface:
The modem provides serial ports to support either the RS-485 Interface standards RS-232 INTERFACE: Connector: D9-F Signals: RTS,
CTS, CD, TD, RD, DSR, and SG
RS-485 INTERFACE:
Connector: RJ-11CSignals: 4-wire full-duplex
TX+, TX-, RX+, RXFRONT PANEL INDICATORS & CONTROL S:
RTS, CTS, TD, CD, RD, MR, ALB, DLB TEST Switch: Push Button for
Analog Loopback, Digital Loopback
AC & DC POWER SUPPORT:
Standalone: 10-48 VDC: 85-400 VDC, 100-240 VAC
Rack mount module: plug-in RM16M modem rack
POWER + CURRENT CONSUMPTION:
75 Ma @ 12 VDC
18 Ma @ 48VDC
MECHANICAL:
Enclosure dimensions:
4.1” (W) x 4.9” (L) x1.4” (H)
104mm (W) x 125mm (L) x36mm (H)
weight: 0.51lbs, without AC power module
ENVIRONMENT:
Operation: -40 Degrees Celsius to + 85 Degrees Celsius
Storage: -40 Degrees Celsius to + 85 Degrees Celsius
Humidity: up to 95% non-condensing
ORDERING INFORMATION
DCE/IGV.23
DCE/IGV.23-DC
DCE/IGV.23-HV
DCE/IGV.23-RM
DCE/IGV.23-WMB
DCE/IGV.23-DIN
STANDALONE (100-240 VAC)
STANDALONE (10-48 VDC)
STANDALONE (100-240 VAC, 85-400 VDC)
RM16M RACKMOUNT MODULE
WALL-MOUNT/PANEL-MODULE
DIN-MOUNT KIT
140
DATA CONNECT ENTERPRISE
PHONE: 301.924.7400 EXT 17
3405 OLANDWOOD CT
FAX: 301.924.7403
OLNEY, MD 20832
USA
www.data-connect.com
INDUSTRIAL SOLUTIONS
NETWORK ANYWHERE
SERIAL DATA& MODEM EXTENSION
IG202T
141
DCE IG202T
SPECIFICATIONS
The Data Connect low speed IG202T Industrial Grade Bell 202
modem is designed and manufactured for rugged industrial communication networks. The IG202T delivers cost effective and reliable 1200bps asynchronous solutions for point to point and multipoint connectivity.
The IG202T Industrial Grade Bell 202 modem is ideal for industrial communication application including SCADA systems, RTUs,
traffic monitor and control, and industrial and automation networks.
The IG202T supports RTUs with switch selectable settings and no
AT command set required. The IG202T modem is designed to operate over 4-wire full duplex or 2-wire half duplex over unconditioned
leased lines or private metallic circuits. For optimum performance,
the modem employs FSK modulation to be compatible with Bell 202
standards, which can communicate over a variety of private transmission lines at a distance up to 10 miles.
The IG202T Industrial Grade Bell 202 modem can operate over a
wide range of AC or DC power supply voltages and temperatures.
With Proven reliability and ease of installation the IG202T is ideal
for point-to-point and point-to-multipoint polling networks, where
reliability and low-network latency are critical for system performance. With its Auto-RTS mode, the modem can support DTE/RTUs
with 3-wire serial interface (TD, RD, and SG) in point-to-point and
multi-point polling applications.
The IG202T industrial grade Bell 202 modem has selectable EIA
RS-232/V.24 and RS-485 DTE support. It also features built-in diagnostics for local and remote testing. The configuring and options on
the IG202T is provided by DIP switches and jumpers, eliminating the
need for an AT command set. The IG202T has heavy-duty surge
protection at the power supply and leased line inputs. IG202T also
uses an isolated DC to DC power converter for protecting critical
DC or battery power systems.
DATA RATE SUPPORT:
Data Speed 0-1200 bps in Bell 202T mode Data Format Asynchronous, transparent character format (10 or 11-bit character with 1 or
2 stop bits)
MODULATION:
Frequency Shift Key (FSK)
Bell 202 Mode: Mark 1200 Hz
Space 2200 Hz
Softt Carrier 900 Hz
TRANSMISSION LINE INTERFACE:
Leased Line TELCO voice band 2 or 4 –wire leased lines Private or
metallic circuits 2 or 4 –wire, 19-26 AWG Connector: 4 PIN RJ-11C
modular jack
Private Line at a distance up to 10 miles
Transmitter output level: 0 to -12dbm, selectable
DTE/RTU Interface:
The modem provides serial ports to support either the RS-485
Interface standards RS-232 INTERFACE: Connector: D9-F Signals:
RTS, CTS, CD, TD, RD, DSR, and SG
RS-485 INTERFACE:
Connector: RJ-11CSignals: 4-wire full-duplex
TX+, TX-, RX+, RXFRONT PANEL INDICATORS & CONTROL S:
RTS, CTS, TD, CD, RD, MR, ALB, DLB TEST Switch: Push Button
for Analog Loopback, Digital Loopback
AC & DC POWER SUPPORT:
Standalone: 10-48 VDC: 85-400 VDC, 100-240 VAC
Rack mount module: plug-in RM16M modem rack
POWER + CURRENT CONSUMPTION:
75 Ma @ 12 VDC
18 Ma @ 48VDC
MECHANICAL:
Enclosure dimensions:
4.1” (W) x 4.9” (L) x1.4” (H)
104mm (W) x 125mm (L) x36mm (H)
weight: 0.51lbs, without AC power module
ENVIRONMENT:
Operation: -40 Degrees Celsius to + 85 Degrees Celsius
Storage: -40 Degrees Celsius to + 85 Degrees Celsius
Humidity: up to 95% non-condensing
ORDERING INFORMATION
DCE/IG202T
DCE/IG202T-DC
DCE/IG202T-HV
DCE/IG202T-RM
DCE/IG202T-WMB
DCE/IG202T-DIN
STANDALONE (100-240 VAC)
STANDALONE (10-48 VDC)
STANDALONE (100-240 VAC, 85-400 VDC)
RM16M RACKMOUNT MODULE
WALL-MOUNT/PANEL-MODULE
DIN-MOUNT KIT
141
DATA CONNECT ENTERPRISE
PHONE: 301.924.7400 EXT 17
3405 OLANDWOOD CT
FAX: 301.924.7403
OLNEY, MD 20832
USA
www.data-connect.com
INDUSTRIAL SOLUTIONS
NETWORK ANYWHERE
SERIAL DATA& MODEM EXTENSION
IG202T-R38
142
DCE IG202T-R38
SPECIFACTIONS
The Data Connect
IG202T-R38 is Bell 202 frequency shift key (FSK) and quadrature
amplitude modulation (QAM) modem for asynchronous and synchronous data transmission in 300-3400 Hz voice band. It is highly immune to interference and noise and permits extensive voice-band
communication link utilization.
The modem supports several international standards ITU V.21,
V.23, R.35, R.37, R.38A, R38B, v.29, Bell 103, Bell 202 and propriety
Cegelec 1200/600Bd and Indactic 33 communication standards.
The modem can operate in half or full-duplex, point-to-point or
point-to-multipoint mode when using FSK modulation the receive
and transmit channels may be independently set. Private linedistance is up to 10 miles.
The modem employs advanced DSP technology, thus offering
high service flexibility through programmable features. Software
configuration is performed via Hayes AT command set. AT commands can be initiated from any terminal application using and RS232 communication interface. Additionally, for easy firmware upgrade a bootstrap loader is provided.
The modem features programmable modem capability for SCADA
or power utility communication networks. It can support a range of
standards including ITUR.35, R.37, R.38A, R.38B, V.21, V.23, Bell 103,
and Bell 202. It is fully programmable via Hayes AT command set.
The modem also features specialized line, power line carrier, or radio
communication, as well as half or full-duplex operating modes.
The IG202T-R38 is designed for use in SCADA systems mainly
based upon power utility communication networks. Depending on
modulation standards it can communicate through specialized, private or leased lines, radio links and power lines (PLC)
The IG202T-R38 is available as a desktop modem or in two different types standard 19” rack, including: 1U rack with 1, 2, or 3 modems per rack;
3U rack with 10, 12 or 14 modems per rack, with
additional blank front plates covering unused slots. All connectors at
the rear side are accessible at the back openings. ORDERING INFORMATION
DCE/IG202T-R38-DC-12
DCE/IG202T-R38-DC-24
DCE/IG202T-R38-DC-48
DCE/IG202TRM-R38
STANDALONE (9-18 VDC)
STANDALONE (18-36 VDC)
STAMDALONE (25-50 VDC)
RACKMOUNT MODEM
MODULATION
FSK
ITU R.35
ITU R.37
ITU R.38B
ITU R.38A
ITU V.21
ITU V23/1/2
Bell 103
Bell 202
QAM
ITU V29
TRANS. RATE
Bd
50
100
200
200/300
300
600/1200
300
1200
TRANS.RATE
Bps
4800
7200
9600
Operation Type
Data Transmission on audio frequency analog medium
Media - Leased line, radio, PLC
Private Line at a distance up to 10 miles
Modes - asynchronous or synchronous, point-to-point, 2-wire or 4-wire
-support for synchronous Indactic 33 protocol.
INTERFACES
DTE Interface - RS-232C, DB (female) connector
Signals:
DCD, RD, TD, DTR, SG, DSR, RTS, CTS, RI
Character length:
5-9 data bits, 1 start & 1 stop
RTS/CTS delay:
adjustable by 1ms step within range of 40-6825ms
option to transmit on RTS
Configuration:
AT command set
ANALOG LINE
DB15 (female) connector
-600Ω or high impedance with return loss <0.2
Transmission level: 0 to -32dBM, programmable by 1dBstep
Receive level: 0 to -36dBM, programmable by 1 dB step, min. -48dBM
Radio control: half duplex control squelch detection
POWER SUPPLY:
2-position screw plug type (for 2-2.5mm 2 wire)
GENERAL LED INDICATION POWER SUPPLY:
PWR, TXD, RXD, RTS, RTS, DCD
9- 18VDC, 9-12VAC, model 12
18-36VDC, 14-23VAC, model 24
36-72VDC, 25-50VAC, model 48
ISOLATION IMMUNITY to NOISE
Transformer up to 1500V
Peak pulse noise: 100v Peak
Effective interference at 50 Hz: 80V rms
TEMPERATURE DIMENSIONS
Operation and storage: -10 to 50 °C
desktop: aluminum enclosure 11x30x170mm
19” rack: EUROCARD PCB, 160x100mm 3HE, 6T in 1U and 3U rack
FREQ. DEVN.
Hz
±30
±60
±90
±120
±100
±200/400
±100
±500
SYM. RATE
CHANL. SPACE.
Hz
120
240
360
480
400
800/1600
400
2000
CONST. PT.
2400
2400
2400
4
8
16
LOW FREQ
Hz
420
480
540
600
CARE.FREQ.
Hz
1700
1700
1700
HIGH FREQ
Hz
3300
3120
3060
3000
1080/1750
1500/1700
1170/2125
1700
MODE
half duplex
half duplex
half duplex
142
DATA CONNECT ENTERPRISE
PHONE: 301.924.7400 EXT 17
3405 OLANDWOOD CT
FAX: 301.924.7403
OLNEY, MD 20832
USA
www.data-connect.com
INDUSTRIAL SOLUTIONS
NETWORK ANYWHERE
SERIAL DATA& MODEM EXTENSION
MIU-202T
143
DCE MIU-202T
SPECIFICATIONS
Bell 202T continues to be the standard of choices in many utility
and industrial multi-drop data communications applications. The
Data Connect Enterprise MIU202T can be powered from a wide range
of DC and AC voltages, is surge protected on both the power and
analog lines, and will operate in extreme heat and cold. Ideal for multi
-drop applications over leased lines and private lines at a distance up
to 10 miles..
The MIU202T is a Bell Standard 202T modem designed for asynchronous operation at 0 to 1200 bps over voice grade lines and pilot
wires. The modem is intended for use on leased lines and private
lines and provides half-duplex communications on 2-wire lines, or
full-duplex on 4-wire.
Most modem manufactures have abandoned the Bell 202T in favor
of the much higher speed modulation preferred in dial-up systems.
However, Bell 202T remains the standard of choice in many utility
and industrial applications where relatively small amounts of data
are to be transmitted in multi-point networks.
To meet this continued demand, Data Connect Enterprise has
added the MIU202T to its range of Communications Interface Units
(see separate brochure).
The MIU202T can be powered from any AC or DC voltage in the
range of 48V to 220V.A 9-36VDC version is also available. It is designed to work extended temperatures ranging from -40C to +80 C,
and its surge protected to 8kV, double the voltage requirements of
IEC801-4 standard.
All of this is bundled in a 5-3/8“x 4” x 1-3/8,’ non metallic enclosure, suitable for desktop or wall mounting. Rack mount cards are
also available for Data Connect Enterprise “Myriad” system (see
separate brochure)
Data Rate:
Asynchronous 0-1200bps over voice grade leased or pilot lines
Modulation:
Bell 202T
Operation: phase coherent, (FSK)
Full duplex over 4-wire leased or private lines
Half duplex over 2-wire leased or private lines
Private Line at a distance up to 10 miles
(constant or switched carrier, Dip Switch selectable)
Power supply: 48VAC/DC (Optional 9- 36VDC)
Power consumption:
15mA @ 48VD; 7.5mA @ 115CDV; 7.5mA @ 125VDC
Digital Port:
RS232 with DB9 Connector
Analog Port:
RJ11
Power connector:
3-pin with screw terminals for customer supplied cable
Case Size:
5-3/8” x 4” x 1-3/8”
Surge protection:
(Power Line) - 8kV [Exceeds IEC801-4]
Surge protection:
(Analog Line) - 3.75kVac
Operation equipment
-40 C to +85 C, 0 to 95% humidity (non-condensing)
Carrier Frequencies:
Bell 202T…
Mark:
1200Hz ± 0.1%
Space: 2200Hz ± 0.1% FEATURES
0-1200 bps, leased AC/DC powered substation hardened Bell 202T
0-1200 bps over voice grade leased lines
Point-to-point or multi-point
48 to 220V AC/DC Power Supply
9-36VDC optional power supply
IEC901-4 surge protection
-40 C to +85 C operating Temp.
For meters, RTUs, SCADA, etc.
ORDERING INFORMATION
DCE/MIU-202T
BELL 202 1.2Kbps Leased Line Modem
DCE/MIU-202T-LV BELL 202 1.2Kbps Leased Line Modem Low
Voltage
143
DATA CONNECT ENTERPRISE
PHONE: 301.924.7400 EXT 17
3405 OLANDWOOD CT
FAX: 301.924.7403
OLNEY, MD 20832
USA
www.data-connect.com
INDUSTRIAL SOLUTIONS
NETWORK ANYWHERE
SERIAL DATA& MODEM EXTENSION
MD202T
144
DCE MD202T
SPECIFICATIONS
The Data Connect MD202T is the rack-mount version of The Data
Connect MIU202T. The same functionally that can be found in the
MIU202T can be found in the MD202T.
The Data Connect MD202T is a Bell 202T modem designed for asynchronous operation at 0 to 1200bps over voice grade lines and pilot
wires. The modem is intended for use on leased lines or private lines
and provides half duplex communications on 2 wire lines, or full duplex
on 4-wire lines. Private line distance is up to 10 miles.
The MD202T is comprised of MDMC carrier card and PE202T module. Up to 18 MD202T can be front loaded into a MDR Modem Bank. The
MDR Modem Bank is an industrial grade 19” x 3U rack mountable chassis. The MDR Modem Bank is powered from a wide range of AC or DC
voltages. Two power supply cards can be installed to provide automatic back up in the event the primary power supply fails. The MDR will
operate in temperatures from -20 C to +85 C and is surged protected
on both power and analog lines.
Two power supply slots are provided. Power supply cards are available for any voltage in the range 9- 150VDC and 9-275VAC. A single
power supply card will power all 18 MD202T.
In addition to the MD202T the MDR Modem Bank also houses the
MD28.8, MD14.4, MD14.4L, and MD9.6FPD.
Data Rate:
Asynchronous· 9-1200 bps over voice grade leased lines or pilot
wires
Modulation:
Bell 202T
Phase coherent, Frequency Shift Keyed (FSK)
Operation:
Full duplex over 4-wire leased lines or private lines
Half duplex over 2-wire leased or private lines “
Private Line at a distance up to 10 miles
(Constant or Switched Carrier, DIP Switch Selectable)
Digital Port:
RS232 with DB9 Connectors
Analog Port:
RJ11
Surge Protection:
(Power Line): 8kV [Exceeds IEC801-4]
Surge Protection:
(Analog Line): 3.75Vac
Operating Equipment:
-20 C to + 85 C, 0 to 95% humidity (non-condensing)
Carrier Frequencies:
Bell 202T…
Mark:
1200Hz ± 0.1%
Space:
1200Hz ± 0.1%
Line Independence:
600 ohms
Anti streaming:
45 seconds or more
Transmitter Output Level:
0 or -10dBm
Receive Sensitivity:
-33 or -43dBm
RTS/CTS delay:
1, 12, 35, or 50msec
Carrier Detect Delay:
8.5msec
Soft Carrier Turnoff:
8.3msec
Test Features:
Analog Loopback
FEATURES
ORDERING INFORMATION
DCE/MD2O2T
BELL 202 1.2Kbps Rackmount Modem
0-1200bps, leased lines AC/DC powered Bell 202T
0-1200bps over voice grade leased lines
Point-to-point or multipoint
IEC901-4 Surge Protection
-20 C to +85 C
for meters RTUs, SCADA, etc.
144
DATA CONNECT ENTERPRISE
PHONE: 301.924.7400 EXT 17
3405 OLANDWOOD CT
FAX: 301.924.7403
OLNEY, MD 20832
USA
www.data-connect.com
INDUSTRIAL SOLUTIONS
NETWORK ANYWHERE
SERIAL DATA& MODEM EXTENSION
MDR
145
DCE MDR
FEATURES
18 Modem Slots
Dial & Leased Line Modems
V.22, 202T, 9.6FPD, V.32bis, V.34
Hayes AT Compatibility
Full Array of LEDs
Standard 19” x 5.25” (3U) Euro-Chassis
AC or DC Power from 9 to 300VAC or VDC
Dual Power Supplies with Full Redundancy
Ideal for SCADA Master Stations
The Data Connect MDR Modem Chassis is designed to house
eighteen (18) DCE MD Modem Cards and two (2) DCE MDP Power
Supplies. The DCE MDR Modem Chassis is hardened industrial
grade, 19” wide, 3U height (5.25”H), and constructed heavy gauge
steel with plating for corrosion resistance.
The DCE MD Modem Cards are comprised of a DCE MDMC Modem
Carrier Card and a DCE PE OEM Card. The DCE MD202T (Bell 202T),
MD9.6FPD (Proprietary), MD2.4 (V.22), MD14.4 (V.32bis), MD14.4L
(V.32bis), and MD28.8 (V.34) operate within the DCE MDR Modem
Chassis and are hot-swappable. Any mix of the DCE MD modems
can be utilized simultaneously.
Two (2) DCE MDP Power Supplies Cards provide full redundancy
and are available for any voltage in the range of 9-150VDC and 9275VAC. A single DCE MDP Power Supply Card powers eighteen
(18) Modem Cards. A second DCE MDP Power Supply Card, if installed, provides automatic backup in the event of a failure of the
primary DCE MDP Power Supply Card.
SPECIFICATIONS
EIA Standards
Compliant with EIA Standard EIA-310-C
Modem Interface Connectors (Rear)
Serial RS232: DB25F
Analog Port: RJ11
LEDs (Front)
(Top to bottom)
DTR: Data Terminal Ready
TXD: Transmit Data
RXD: Receive Data
MR: Modem Ready
CD: Carrier Detect
RTS: Request to Send
CTS: Clear to Send
RI: Ring Indicator
Power Requirements
AC Power: 9 to275VAC – Fused Socket (IEC 320)
DC Power: 9 to 150VDC – Screw Terminals – 9 to 150VDC
Dimensions
Width: 19”
Depth:
Height: 5.25” (3U)
Environmental
Operating Temperature: -20 to +85 Degrees Celsius
145
DATA CONNECT ENTERPRISE
PHONE: 301.924.7400 EXT 17
3405 OLANDWOOD CT
FAX: 301.924.7403
OLNEY, MD 20832
USA
www.data-connect.com
INDUSTRIAL SOLUTIONS
NETWORK ANYWHERE
SERIAL DATA& MODEM EXTENSION
PE202T
146
DCE PE202T
To service the growing need for efficient, reliable data communication in harsh environments of utility substations and industrial facilities, DCE has developed a series of OEM PCB modems that can operate at 5V logic (TTL) or simple send and receive signals and survive
high surge levels and extreme heat and cold. All this without compromising the performance expected from state-of-the-art communication
devices. With the rapid move toward “intelligent” substations, where
meters, relays, RTUs, SCADA systems, etc. are able to “talk” to a remote operator, communication devices such as modems are moving
off the desktop and into the meters, RTUs, and SCADA units where the
conveniences of a standalone modem is unacceptable. Data Connect Enterprise has addressed this problem by developing
the PE2.4, 9.6FPD, 14.4, 14.4L, 202T, and 28.8 OEM modems designed
specifically for harsh environments.
The PE OEM modems are highly sophisticated full duplex, V.22bis
data modems that are designed to interface with RS232, RS485
(external device), 5V logic (TTL) or simple send and receive signals.
The PE2.4, 14.4, and 28.8 OEM modems operate at full or half duplex on
a dial up line. The PE202T, 14.4L, and 9.6FPD OPM modems operate full
or half duplex on 2 or 4 wire leased lines.
The PE OEM PECs can be found in the MIU modems, MD modem
cards, and the MIU Power Port modems.
ORDERING INFORMATION
DCE/PE202T
2/4-WIRE LEASED LINE PCB
FEATURES
Modem Interface Units 5V logic (TTL)
Simple send and receive signals
1200kbps 2/4-Wire Leased Line modem
5V logic (TTL) power supply
IEC801-4 surge protection
-40°C to +85°C operating temperature
SPECIFICATIONS
Modem Line Speeds:
0-1200bps
Standard:
Bell 202T
Transmission Line:
4-wire or private lines
Compatibility:
Hayes Extended AT Command Set
146
DATA CONNECT ENTERPRISE
PHONE: 301.924.7400 EXT 17
3405 OLANDWOOD CT
FAX: 301.924.7403
OLNEY, MD 20832
USA
www.data-connect.com
INDUSTRIAL SOLUTIONS
NETWORK ANYWHERE
SERIAL DATA& MODEM EXTENSION
202TE-037-4
147
DCE 202TE-037-4
SPECIFACTIONS
For years the Bell 202 modem has delivered reliable low speed multipoint communications. Today, this device still enjoys great popularity
due to its ability to communicate under adverse conditions. The Bell
202 remains the right choice for telemetry applications, control systems, transaction applications, and for reliable data delivery over RF or
cellular connections.
The Data Connect ST202TE series offers a modem implementation
of this classic modulation standard. In this design, we have utilized the
latest semiconductor technology to guarantee a level of performance
and reliability that cannot be matched by older designs.
The industrial-rated Data Connect ST202TE is housed in metal enclosures and is built too meet the most stringent criteria. Temperature
ratings, for example, range from -40 C to +85 C. versatile power supply
options will meet most industrial application.
The ST202TE series was designed, however, to allow implementation of a wide variety of OEM applications. Like all Data Connect designs, it is microcontroller based so that it may support custom interfaces and protocols. In addition, the line interface of the ST202TE series is capable of supporting, either leased circuits, dial circuits or
short hall twist pair. Private line distance is up to 10 miles.
The ST202TE series is available in our standalone or rack mount
configuration. In addition, this device is available at the board level for
OEM applications
Compatibility:
Bell 202S, Bell 202T
DTE Interface:
RS-232C (V.24) 0-1800bps.
Configuration Control:
Parameters set through switches
Line Interface:
Standard 4-wire leased
Standard 2-wire leased
optional 2-wire dial.
Private Line at a distance up to 10 miles
Line Diagnostic:
DTE and modem generated test patterns
Local Analog Loopback
Local Digital Loopback
Remote Digital Loopback
Transmit Power:
Adjustable in 2db increments from 0dBmthrough -14dBm
Power:
Standalone Unit-Automatically adjust 9Vac or 9-14VDC
Power Supply Options- 5.5-14VDC, 18-75VDC, 66-160VDC
Rack mount - Standard CC-2016 rack automatically adjust to 85265VAC, 27-440Hz. Optional DC Supply, automatically adjusts to
positive or negative 36-75VDC
Operating Environment: -40 C to +85 C
Humidity – 95% non-condensing
Approvals:
FCC part 68 & part 15, Class A optional international approval are
available.
Physical:
Standalone Units- Dimensions 6.19”L x 5.12”W x 1.75 “H
Weight 30oz. (metal enclosure)
Rack mount Unit- Fits ST-2016 Rack.
4.73” L x 4.60”W x .80H
Weight: 9oz
FEATURES
Compatible with all standards Bell 202S or 202T modems. Engineered and manufactured to standards with metal enclosure.
Easy to configure
4-Wire leased line (202T) 2-wire leased line (202S)
ORDERING INFORMATION
DCE/202TE-037-4 BELL 202 1.2Kbps Leased Line Modem
DCE/202TR-037-4 BELL 202 1.2Kbps Leased Line Rackmount
Modem
147
DATA CONNECT ENTERPRISE
PHONE: 301.924.7400 EXT 17
3405 OLANDWOOD CT
FAX: 301.924.7403
OLNEY, MD 20832
USA
www.data-connect.com
INDUSTRIAL SOLUTIONS
NETWORK ANYWHERE
SERIAL DATA& MODEM EXTENSION
IG96HFP
148
DCE IG96HFP
SPECIFICATIONS
The IG96HFP industrial grade 9.6 kbps hyper fast modem is designed to
operate over 4-wire full duplex or 2 wire half duplex unconditioned leased
lines or private metallic circuits. For optimum performance, the modem employs QAM modulations along with its adaptive equalizers to communicate
over a variety of private transmissions lines at a distance up to 16.1 miles.
The IG96HFP supports DTE/RTUs with an EIA RS-232 andRS-485 serial port
at speeds of 9600, 4800, 2400 and 1200 bps. EIA its Auto-RTS mode, the
modem can support DTE/RTUs with 3-wire serial interface (TD, RD, and SG)
in multi-point polling applications.
The triple mode capability allows the IG96HFP industrial grade 9.6 kbps
hyper fast poll modem to communicate with the older generation
DSP9612FP at up to 9600 kbps and both the Bell 202T and V.23 FSK modem
at up to 1200 bps.
The IG96HFP industrial grade 9.6 kbps hyper fast poll modem to range
AC or DC power supply voltage and temperatures, with proven reliability
and ease of installation, the IG96HFP is deal for point-to-multipoint polling
networks, where fast training time and low-network latency are critical for
system performance.
ORDERING INFORMATION
DCE/IG96HFP
DCE/IG96HFP-LV
DCE/IG96HFP-HV
DCE/IG96HFP-RM
DCE/96HFP-WMB
DCE/IG96HFP-DIN
STANDALONE (100-240VAC)
STANDALONE (10-48 VDC)
STANDALONE (100-240 VAC, 85-400 VDC)
RM16M RACK-MOUNT MODULE
WALL-MOUNT/PANEL-MOUNT KIT
DIN RAIL MOUNTING KIT
TRIPLE MODE:
Hyper Fast Poll mode at 9600, 17.5 ms RTS-CTS delay QAM
mode at 9600/4800/4200bps 23 ms RTS-CTS delay FSK mode for
Bell 202T (0-1800) modes
DTE/RTU INTERFACE:
RS-232 interface with full control signals support (db-9F) RS485/RS422 support, 4-wire F.D., or 2-wire H.D Auto RTS and
forced RTS options to support 3-wire interface
LEASED LINE INTERFACE:
Telco 2- or 4- wire conditioned or unconditioned lines private
metallic 2 or 4 wire circuits. Cable equalizer for long distance
over standard cables
Private Line at a distance up to 16.1 miles
MECHANICAL:
Enclosure Dimensions: 5.0” (W) x 6.75” (L) x 1.3” (H). 127mm
(W) x 172mm (L) x 33mm (H)
DIAGNOSTICS:
Local or remote Analog + digital loopback Eight (8) front panel
LEDs for status monitoring AC and DC
POWER SUPPORT:
Standalone: 10-48 VDC, 85-400 VDC, 100-240 AC Rack Mount
modules: Plug-in RM16M modem rack
ENVIRONMENTAL:
Operating temperatures:-40 to 85 degrees Celsius storage temperature:-40 to 100 degrees Celsius humidity: up to 95% noncondensing
OPTIONAL MOUNTING KITS:
Wall-mount or panel-mount kit
DIN rail mounting kit
POWER+ CURRENT CONSUMPTION:
125 mA @ 12 VDC
28.0 mA @ 48 VDC
148
DATA CONNECT ENTERPRISE
PHONE: 301.924.7400 EXT 17
3405 OLANDWOOD CT
FAX: 301.924.7403
OLNEY, MD 20832
USA
www.data-connect.com
INDUSTRIAL SOLUTIONS
NETWORK ANYWHERE
SERIAL DATA& MODEM EXTENSION
DSP9612
149
DCE DSP9612
SPECIFICATIONS
The DCE Fast Poll DSP9612 is a triple mode, full featured 9600 QAM fast
poll, ITU V.23 and Bell 202T leased line or private wire modem with the fastest training time in the industry: 23msec RTS?CTS delay at 9600bps and
8ms in Bell 202T mode. The DSP9612 is ideal for utility and industrial automation multi-dropping applications, where an unlimited number or drops is
desirable at ranges up to 16 miles (26km), including SCADA systems, traffic
automation and oil or gas automation products.
The DSP9612 is a modem designed for 4-wire full duplex or 2 wire halfduplex operation over a voice-band leased line or private copper wire. The
modem designed utilizes the latest digital-signal processing (DSP) technology to achieve high performance with an adaptive equalizer for the best
operation on the poor unconditional lines.
In Fast Poll Mode (9600/4800bps), the dsp9612 employs a propriety
modulation and encoding scheme to achieve fast modem training time in
V.23 or Bell 202T mode, the modem is also backward compatible with V.23
(0-1800bps) modems.
Ideal for systems where fast response, shirt training time and low
throughput is required, the Flash poll is optimized for fast receiver equalizer training and extremely low through put delay.
The triple mode capability allows the DSP9612 to communicate with
existing V.23 or Bell 202T modems at up to 1800bps, which can then be
upgraded later to DCE DSP9612 Fast poll standalone modems and switched
to 9600bps. Three models are available: Rack mount (RM) for insertion into
RM16 nest, stand alone AC/DC powered (FP) and standalone low Voltage
DC powered (LV).
Auto RTS is a new feature allowing multi-drop for devices with 3 wire
data interfaces and no control signals (no RTS signal) required.
FEATURES
Fast poll modems are industrial grade modems designed for harsh environmental conditions [-40 to 85 degrees Celsius] with ultra fast polling times.
Triple mode: QAM 9600 or 4800 bps, ITU V.23 and Bell202T.
Fast Training modem equalizer with 23msec RTS/CTS delay @ 9600/4800bps.
DSP designed with automatic adaptive equalizer.
Leased-line or private wire interfaces. Line and power protected with heavyduty surge protection.
Stand alone or nest card for RM16 nest.
All settings are DIP switch selectable with no software commands
Auto RTS allows multi-drop for devices with three wire data interface.
DATA RATE
Fast Poll Mode: 9600 or 4800 bps asynchronous, +1% -2.5%
Bell 202T Mode: 0-1800 bps asynchronous
V.23 Mode:
0-1200bps asynchronous
DATA FORMAT - 8 or 9 data bits with 1 more stop bits
LINE REQIREMENTS - TELCO Voice band 2 or 2 wire leased line.
Private metal RS-232 (DTE) INTERFACE
Signal Name
in/out DP25
PIN Description
Earth
GND1
Earth Ground
TXD
Input 2
Transmit Data
RXD
Output 3
Receive Data
RTS
Input 4
Request to Send
CTS
Output 5
Clear to Send
DSR
Output 6
Data Set Ready
(Modem Ready)
SG
GND7
Signal Ground
DCD
Output 8
Data Carrier Detected
DTR
Input20
Data Terminal Ready
(HOST READY)
DSR
Input23
Data Select Rate
OPERATING MODES - 2-wire half duplex or 4-wire full duplex
MODULATION - DCE Propriety (Fast Poll Mode)
EQUALIZER - Automatic, adaptive in Fast Poll Mode, Fixed compromised in
FSK mode
TRAINING TIME (RTS to CTS Delay)
Fast Poll Mode: 23ms V23 33ms
Bell 202T Mode:8, 33, 59, 219 ms
CABLE EQUALIZER - Fixed transmitter and receiver cable equalizer
Private Line at a distance up to 16.1 miles
POWER SUPPLY (BY MODEL)
DSP9612RM, powered from RM16 Rack
DSP9612LV, 10 to 53 VDC
DSP9612FP, 85 to 265 VAC or 85 to 400 VDC
SURGE PROTECTION - Provided at power line and leased line; Up to 15KV
(Standalone Version)
CARRIER CONTROL - Constant or switched, DIP Switch available
SYNCHRONIZATION LOSS RECOVERY - Built in Train on Data for Fast Poll
TRANSMIT OUTPUT LEVEL +3dbm, to -14dbm, 1dbm step (Dip Switch available)
OPERATING TEMPERATURE - -40 Degrees Celsius to 85 Degrees Celsius
RM FORM FACTOR - Rack-Mount Modem card for the DCE and the Motorola/
UDS MD16M Universal Data Shelf
Dimension 9” x 6.25 x 0.87”
Weight 8oz.
LV AND FP FORM FACTOR - Aluminum and Steel Case
Dimensions: 5.7” x 8.3” x1.5” (144.78mm x 210.82mm x 38.1mm)
Weight: 1.9lb (227 grams)
DIAGNOSTIC FEATURES
Front panel LED for status monitoring: Power (PWR), Request to send
(RTS), Clear to Send (CTS), Transmit Data (TXD), Receive Data (RXD), Data
Carrier Detect (DCD), Data Set Ready (DSR), Analog Loopback (ALB), Digital
Loopback (DLB)
Front Panel loopback control for testing: Local Analog Loopback (ALB),
Local Digital Loopback (DLB), Remote Digital Loopback (RDL)(except V.23
Mode)
DIAGNOSTIC FEATURES
Front panel LED for status monitoring: Power (PWR), Request to Send
(RTS), Clear to Send (CTS), Transmit Data (TD), Receive Data (RD), Data
Carrier Detect (DCD), Data Set Ready (DSR), Analog Loopback, Digital
Loopback
Front Panel loopback control for testing: Local Analog Loopback, Local
Digital Loopback, Remote Digital Loopback (except V.23 Mode)
149
DATA CONNECT ENTERPRISE
PHONE: 301.924.7400 EXT 17
3405 OLANDWOOD CT
FAX: 301.924.7403
OLNEY, MD 20832
USA
www.data-connect.com
INDUSTRIAL SOLUTIONS
NETWORK ANYWHERE
SERIAL DATA& MODEM EXTENSION
MIU-9.6FPD
150
DCE MIU-9.6FPD
FEATURES
Modem Interface Units AC/DC Powered
Substation Hardened Communication Interface Units
9.6 kbps 2 & 4-Wire Leased Line Modem
48 to 220 AC/DC Power Supply
IEC801-4 Surge Protection
-40°C to + 85°C Operating Temperature
For Meters, Relays, SCADA etc.
GENERAL SPECIFICATIONS
To service the growing need for efficient, reliable data communication in
harsh environments of utility substations and industrial facilities, has
developed a 9600 Fast Poll modem that can operate from various AC/DC
power supplies and survive high surge levels and extreme heat and cold.
All this without compromising the performance expected from state-ofthe-art communication devices.
With the rapid move toward “intelligent” substations, where meters, relays, RTU’s, SCADA systems, etc are able to “talk” to a remote operator,
communication devices such as modems are moving off the desktop and
into the field, where the conveniences of 115VAC power outlets and climate control are usually hard to find.
Data Connect Enterprise has addressed this problem by developing the
9.6FPD series modem designed specifically for harsh environments.
The 9.6FPD series modem is a highly sophisticated full duplex V.29 or
V.27 data modem that is designed to interface with RS232, RS485
(external device), 5V logic (TTL) or simple send and receive signals. The
9.6FPD operates at full or half duplex 2-wire or 4-wire lease line and in
multi-polling circuits.
The 9.6FPD is powered from a unique power supply that enables it to
operate on any AC or DC voltage ranging from 48V to 240V. A low voltage
version (9-36VDC) is also available. The 9.6FPD is designed to work in
temperatures from 40°C to 85°C, and is surge protected on both the
power analog lines.
The 9.6FPD is bundled in a 5-3/8” X 1-3/8” non-metallic enclosure, suitable for desktop or wall mounting.
Modem Line Speeds:
Asynchronous 4800, 9600, 14000bps
DTE Rates:
Above modem line speeds (IE; with data compression) 4800, 9600,
14000
Standards:
V.27 & V.29
Transmission Line:
2 & 4 Wire Leased Line
Power Supply 48VAC/DC to 220VA/DC (Optional 9-36VDC)
Power Connector:
4-ft AC Cord with 3-Pin Screw Terminal connector included
Case size:
5-3/8” X 4” X 1-3/8”
Digital Port:
RS232 with DB9 Connector
Analog Port:
RJ11 Modular Jack
Surge Protection: 3.75VAC
Environment: -40°C to +85°C, 0to 95% humidity (non-condensing)
Certifications: FCC Part 68, Industry Canada
ORDERING INFORMATION
DCE MIU9.6FPD
DCE MIU9.6FPD-LV
2-4 – wire leased line standalone
2-4-wire leased line standalone low
voltage
150
DATA CONNECT ENTERPRISE
PHONE: 301.924.7400 EXT 17
3405 OLANDWOOD CT
FAX: 301.924.7403
OLNEY, MD 20832
USA
www.data-connect.com
INDUSTRIAL SOLUTIONS
NETWORK ANYWHERE
SERIAL DATA& MODEM EXTENSION
MD-9.6FPD
151
DCE MD-9.6FPD
FEATURES
14.4kbps 2 or 4-wire Leased Line modem
IEC801-4 surge protection
-20˚C to +80˚C Operating Temperature
Works with Meters, Relays, SCADA, etc.
SPECIFICATIONS
The Data Connect MD-9.6FPD is the rack mount version of the Data
Connect MIU-9.6FPD and MIU-9.6FPD-LV. The same functionally that it
can be found in the MIU-9.6FPD and MIU-9.6FPD-LV can be found in the
MD-9.6FPD.
The Data Connect MD-9.6FPD is a Bell V.29 modem designed for
asynchronous operation at 0 to 9600bps over voice grade lines. The
modem is intended for use on two or four wire Leased Lines. Private
line distance is up to 16.1 miles.
The MD-9.6FPD is comprised of MDMC carrier card and PE-9.6FPD
module. Up to 18 MD-9.6FPD can be front loaded into a MDR Modem
Bank.
The MDR Modem Bank is an industrial grade 19” X 3U rack mountable chassis. The MDR Modem Bank is powered from a wide range of
AC or DC voltages. Two power supply cards can be installed to provide
automatic back up in the event the primary power supply fails. The
MDR will operate in temperatures from -20˚C to +85˚C and is surge protected on both power and analog lines.
Two power supply slots are provided. Power supply cards are available for any voltages in the range 9-150VDC and 9-275VAC. A single
power supply card will power all 18 MD14.4L.
In addition to MD14.4L the MDR Modem Bank also houses the
MD28.8, MD14.4, MD14.4L, and MD202T.
DTE Rates:
Asynchronous 14000, 9600, 4800, 1200, 300bps
Standards:
V.32bis, V.32, V.22bis, V.22, Bell212A, and Bell 103
Transmission Line:
2- and 4-wire leased line
Private Line at a distance up to 10 miles
Compatibility:
Hayes Extended AT Command Set
Digital Port:
RS232 with DB9 connector
Analog Port:
RJ11 Modular Jack
Surge Protection:
(Power Line) 8kV [Exceeds IE801-4] (20Kv {IE801-5}
available if required)
Surge Protection
3.75VAC
Environment:
-40˚C or + 85˚C, 0 to 95% humidity (non-condensing)
Certification:
FCC Part 68, Industry Canada
151
DATA CONNECT ENTERPRISE
PHONE: 301.924.7400 EXT 17
3405 OLANDWOOD CT
FAX: 301.924.7403
OLNEY, MD 20832
USA
www.data-connect.com
INDUSTRIAL SOLUTIONS
NETWORK ANYWHERE
SERIAL DATA& MODEM EXTENSION
MDR
152
DCE MDR
FEATURES
18 Modem Slots
Dial & Leased Line Modems
V.22, 202T, 9.6FPD, V.32bis, V.34
Hayes AT Compatibility
Full Array of LEDs
Standard 19” x 5.25” (3U) Euro-Chassis
AC or DC Power from 9 to 300VAC or VDC
Dual Power Supplies with Full Redundancy
Ideal for SCADA Master Stations
SPECIFICATIONS
The Data Connect MDR Modem Chassis is designed to house
eighteen (18) DCE MD Modem Cards and two (2) DCE MDP Power
Supplies. The DCE MDR Modem Chassis is hardened industrial
grade, 19” wide, 3U height (5.25”H), and constructed heavy gauge
steel with plating for corrosion resistance.
The DCE MD Modem Cards are comprised of a DCE MDMC Modem
Carrier Card and a DCE PE OEM Card. The DCE MD202T (Bell 202T),
MD9.6FPD (Proprietary), MD2.4 (V.22), MD14.4 (V.32bis), MD14.4L
(V.32bis), and MD28.8 (V.34) operate within the DCE MDR Modem
Chassis and are hot-swappable. Any mix of the DCE MD modems
can be utilized simultaneously.
Two (2) DCE MDP Power Supplies Cards provide full redundancy
and are available for any voltage in the range of 9-150VDC and 9275VAC. A single DCE MDP Power Supply Card powers eighteen
(18) Modem Cards. A second DCE MDP Power Supply Card, if installed, provides automatic backup in the event of a failure of the
primary DCE MDP Power Supply Card.
EIA Standards
Compliant with EIA Standard EIA-310-C
Modem Interface Connectors (Rear)
Serial RS232: DB25F
Analog Port: RJ11
LEDs (Front)
(Top to bottom)
DTR: Data Terminal Ready
TXD: Transmit Data
RXD: Receive Data
MR: Modem Ready
CD: Carrier Detect
RTS: Request to Send
CTS: Clear to Send
RI: Ring Indicator
Power Requirements
AC Power: 9 to275VAC – Fused Socket (IEC 320)
DC Power: 9 to 150VDC – Screw Terminals – 9 to 150VDC
Dimensions
Width: 19”
Depth:
Height: 5.25” (3U)
Environmental
Operating Temperature: -20 to +85 Degrees Celsius
152
DATA CONNECT ENTERPRISE
PHONE: 301.924.7400 EXT 17
3405 OLANDWOOD CT
FAX: 301.924.7403
OLNEY, MD 20832
USA
www.data-connect.com
INDUSTRIAL SOLUTIONS
NETWORK ANYWHERE
SERIAL DATA& MODEM EXTENSION
MIU14.4L
153
DCE PE-9.6FPD
FEATURES
To service the growing need for efficient, reliable data communication
in harsh environments of utility substations and industrial facilities, DCE
has developed a series of OEM PCB modems that can operate at 5V logic
(TTL) or simple send and receive signals and survive high surge levels
and extreme heat and cold. All this without compromising the performance expected from state-of-the-art communication devices. With the
rapid move toward “intelligent” substations, where meters, relays, RTUs,
SCADA systems, etc. are able to “talk” to a remote operator, communication devices such as modems are moving off the desktop and into the
meters, RTUs, and SCADA units where the conveniences of a standalone
modem is unacceptable. Private line distances up to 16.1 miles. Data Connect Enterprise has addressed this problem by developing
the PE2.4, 9.6FPD, 14.4, 14.4L, 202T, and 28.8 OEM modems designed
specifically for harsh environments.
The PE OEM modems are highly sophisticated full duplex, V.22bis data
modems that are designed to interface with RS232, RS485 (external device), 5V logic (TTL) or simple send and receive signals. The PE2.4, 14.4,
and 28.8 OEM modems operate at full or half duplex on a dial up line. The
PE202T, 14.4L, and 9.6FPD OPM modems operate full or half duplex on 2
or 4 wire leased lines.
The PE OEM PECs can be found in the MIU modems, MD modem
cards, and the MIU Powerport modems.
Modem Interface Units 5V logic (TTL)
Simple send and receive signals
2400kbps 2-wire dial-up line modem
5V logic (TTL) power supply
IEC801-4 surge protection
-40°C to +85°C operating temperature
For meters, relays, SCADA etc.
PE9.6FPD
Modem Line Speeds:
Asynchronous 4800, 9600, 14000bps
Standards:
V.27, V.29
Transmission Line:
2 & 4 wire leased lines
Private Line at a distance up to 16.1 miles
Compatibility:
Hayes Extended AT Command Set
5V logic (TTL)
ORDERING INFORMATION
DCE/PE9.6FPD
2 & 4 wire leased line PCB
153
DATA CONNECT ENTERPRISE
PHONE: 301.924.7400 EXT 17
3405 OLANDWOOD CT
FAX: 301.924.7403
OLNEY, MD 20832
USA
www.data-connect.com
INDUSTRIAL SOLUTIONS
NETWORK ANYWHERE
SERIAL DATA& MODEM EXTENSION
MIU-PP14.4L
154
DCE MIU14.4L
FEATURES
Modem Interface Units AC/DC Powered
Substation Hardened Communication Interface Units
14.4kbps 2 & 4-wire leased line modem
48 to 220 AC/DC Power Supply
IEC801-4 Surge Protection
-40˚C to +85˚C Operating Temperature
For Meters, Relay, SCADA etc.
To service the growing need for efficient, reliable data communication in harsh environments of utility substation and industrial facilities,
has developed a 14400bps modem that can operate from various AC/
DC power supplies and survive high surge levels and extreme heat and
cold. All this without compromising the performance expected from
state-of-the-art communications devices.
With the rapid move toward “intelligent” substations, where meters,
relays, RTUs, SCADA systems, etc. are able to “talk” to a remote operator, communication devices such as modems are moving off the desktop and into the field, where the convenience of 115VAC power outlets
and climate control are usually hard to find.
Data Connect Enterprise has addressed this problem by developing
the MIU14.4 series modem designed specifically for harsh environments.
The MIU14.4 series modem is highly sophisticated full duplex,
V.32BIS data modem that designed to interface with RS232, RS485
(external device), 5V logic (TTL) or simple send and receive signals The
MIU14.4L series modem operates on 2-wire and 4-wire leased line systems. Private line distance is up to 5 miles.
The MIU14.4 series modem is powered from unique power supply
that enables it to operate on any AC or DC voltage ranging from 48V to
240V. A low voltage version (9-36VDC) is also available. The MIU14.4
series modem is designed to work in temperatures from 40˚C to 85˚C
and is surge protected on both the power and analog lines.
The MIU14.4 series modem is bundled in a 5-3/8” x 1-3/8” nonmetallic enclosure, suitable for desktop or wall mounting.
Also see our Data sheets on the MIU/power-port low voltage modems, the “Myriad” Rack Mount Modem, MIU202T (Bell), MIU28.8 and
MIU9.6FPD modems.
SPECIFICATIONS
Modem Line Speeds:
Asynchronous
14400, 9600, 4800, 1200, 300bps
DTE Rates:
Above modem line speeds (IE; with data
compression) 57.6, 38.4 19.2kbps
Standards:
V.32bis, V.32, V.22bis, V.22, Bell 212A, and
Bell 103
Transmission Line:
2 & 4-wire leased line
Private Line at a distance up to 5 miles
Compatibility:
Hayes Extended AT command set
Power Supply:
48VAC/DC to 220VAC/DC (Optional 9-36VDC)
Power Connector: 4-ft AC Cord with 3-pin screw
terminal connector included
Case size:
5-3/8” x 4” x 1-3/8”
Digital Port:
RS232 with DB9 connector
Analog Port:
RJ11 Modular Jack
Surge Protection: (power line) 8kV [exceeds IEC801-4] (20kV
{IE801-5} available if required)
Surge Protection: 3.75VAC
Environment:
-40˚C to +85˚C, 0 to 95% humidity (noncondensing)
Certifications:
FCC Part 68, Industry Canada
154
DATA CONNECT ENTERPRISE
PHONE: 301.924.7400 EXT 17
3405 OLANDWOOD CT
FAX: 301.924.7403
OLNEY, MD 20832
USA
www.data-connect.com
INDUSTRIAL SOLUTIONS
NETWORK ANYWHERE
SERIAL DATA& MODEM EXTENSION
PE-9.6FPD
155
DCE MIU-PP14.4L
FEATURES
Modem Interface Units AC/DC Powered
Substation Hardened Communication Interface Units
14.4kbps 2 or 4-Wire Leased Line modem
Powered through the RS232 (DB25) data interface port or External Jack
(Optional 7-16VDC available)
Automatic “Power Down” when inactive
IEC801-4 Surge Protection
-40˚C to +85˚C Operating Temperature
Hayes AT compatible
To service the growing need for efficient, reliable data communication in
a harsh environmental of utility substations and industrial facilities, has
developed a 14400bps modem that can operate from various AC/DC power
supplies and survive high surge levels and extreme heat and cold. All this
without compromising the performance expected from state-of-the-art communications devices.
With the rapid move toward “intelligent” substation, where meters relays,
RTU’s, SCADA system, etc are able to “talk” to a remote operator, communication devices such as modems moving off the desktop and into the field,
where the convenience of 115VAC power outlets and climate control are
usually hard to find.
Data Connect Enterprise has addressed this problem by developing the
PowerPortMIU14.4 series modem designed specifically for harsh environments.
The PowerPortMIU14.4L series modem is highly sophisticated full duplex, V.32BIS data modem that designed to interface with RS232, RS485
(external device), 5V logic (TTL) or simple send and receive signals The
PowerPortMIU14.4L series modem operates on a 2 or 4-Wire Leased Line
and Short Haul systems. Private line distance is up to 5 miles.
The PowerPortMIU14.4L series modem is powered from unique power
supply that enables it to operate on any AC or DC voltage ranging from 48V
to 240V. A low voltage version (9-36VDC) is also available. The PowerPortMIU14.4L modem is designed to work in temperatures from 40˚C to 85˚C and
is surge protected on both the power and analog lines.
The PowerPortMIU14.4L series modem is bundled in a 5-3/8” x 1-3/8” non
-metallic enclosure, suitable for desktop or wall mounting.
Also see our Data sheets on the MIU/power-port low voltage modems, the
“Myriad” Rack Mount Modem, MIU202T (Bell), MIU9.6FPD, MIU14.4, and
MIU28.8 modems.
Specifications
Modem Line Speeds:
Asynchronous
14400, 9600, 4800, 1200, 300bps
DTE Rates:
Above modem line speeds (IE; with data compression)
57.6, 38.4 19.2kbps
Standards:
V.32bis, V.32, V.22bis, V.22, Bell 212A, and Bell 103
Transmission Line:
Dial or 2&4 wire leased line
Private Line at a distance up to 5 miles
Compatibility:
Hayes Extended AT command set
Powered through the RS232 (DB25) data interface
port
or external jack (optional 7- 16VDC available)
Case size:
5-3/8” x 4” x 1-3/8”
Digital Port:
RS232 withDB9 connector
Analog Port:
RJ11 Modular Jack
Surge Protection:
(power line) 8kV [exceeds IEC801-4] (20kV {IE801-5}
available if required)
Surge Protection:
3.75VAC
Environment:
-40˚C to +85˚C, 0 to 95% humidity (non-condensing)
Certifications:
FCC Part 68, Industry Canada
155
DATA CONNECT ENTERPRISE
PHONE: 301.924.7400 EXT 17
3405 OLANDWOOD CT
FAX: 301.924.7403
OLNEY, MD 20832
USA
www.data-connect.com
INDUSTRIAL SOLUTIONS
NETWORK ANYWHERE
SERIAL DATA& MODEM EXTENSION
MD14.4L
156
DCE MD14.4L
FEATURES
14.4kbps 2 or 4-wire Leased Line modem
IEC801-4 surge protection
-20˚C to +80˚C Operating Temperature
Works with Meters, Relays, SCADA, etc.
SPECIFICATIONS
The Data Connect MD14.4L is the rack mount version of the Data Connect
MIU14.4L and MIU14.4-LV. The same functionally that it can be found in the
MIU14.4L and MIU14.4-LV can be found in the MD14.4L.
The Data Connect MD.14.4L is a Bell V.32bis modem designed for asynchronous operation at 0 to 14400bps over voice grade lines. The modem is
intended for use on two or four wire Leased Lines. Private line distance is
up to 5 miles.
The MD14.4L is comprised of MDMC carrier card and PE14.4L module.
Up to 18 MD14.4L can be front loaded into a MDR Modem Bank.
The MDR Modem Bank is an industrial grade 19” X 3U rack mountable
chassis. The MDR Modem Bank is powered from a wide range of AC or DC
voltages. Two power supply cards can be installed to provide automatic
back up in the event the primary power supply fails. The MDR will operate
in temperatures from -20˚C to +85˚C and is surge protected on both power
and analog lines.
Two power supply slots are provided. Power supply cards are available
for any voltages in the range 9-150VDC and 9-275VAC. A single power supply card will power all 18 MD14.4L.
In addition to MD14.4L the MDR Modem Bank also houses the MD28.8,
MD14.4, MD9.6FPD, and MD202T.
DTE Rates:
Asynchronous 14000, 9600, 4800, 1200, 300bps
Standards:
V.32bis, V.32, V.22bis, V.22, Bell212A, and Bell 103
Transmission Line:
2- and 4-wire leased line
Private Line at a distance up to 5 miles
Compatibility:
Hayes Extended AT Command Set
Digital Port:
RS232 with DB9 connector
Analog Port:
RJ11 Modular Jack
Surge Protection:
(Power Line) 8kV [Exceeds IE801-4] (20Kv {IE801-5}
available if required)
Surge Protection
3.75VAC
Environment:
-40˚C or + 85˚C, 0 to 95% humidity (non-condensing)
Certification:
FCC Part 68, Industry Canada
156
DATA CONNECT ENTERPRISE
PHONE: 301.924.7400 EXT 17
3405 OLANDWOOD CT
FAX: 301.924.7403
OLNEY, MD 20832
USA
www.data-connect.com
INDUSTRIAL SOLUTIONS
NETWORK ANYWHERE
SERIAL DATA& MODEM EXTENSION
MDR
157
DCE MDR
FEATURES
18 Modem Slots
Dial & Leased Line Modems
V.22, 202T, 9.6FPD, V.32bis, V.34
Hayes AT Compatibility
Full Array of LEDs
Standard 19” x 5.25” (3U) Euro-Chassis
AC or DC Power from 9 to 300VAC or VDC
Dual Power Supplies with Full Redundancy
Ideal for SCADA Master Stations
SPECIFICATIONS
The Data Connect MDR Modem Chassis is designed to house
eighteen (18) DCE MD Modem Cards and two (2) DCE MDP Power
Supplies. The DCE MDR Modem Chassis is hardened industrial
grade, 19” wide, 3U height (5.25”H), and constructed heavy gauge
steel with plating for corrosion resistance.
The DCE MD Modem Cards are comprised of a DCE MDMC Modem
Carrier Card and a DCE PE OEM Card. The DCE MD202T (Bell 202T),
MD9.6FPD (Proprietary), MD2.4 (V.22), MD14.4 (V.32bis), MD14.4L
(V.32bis), and MD28.8 (V.34) operate within the DCE MDR Modem
Chassis and are hot-swappable. Any mix of the DCE MD modems
can be utilized simultaneously.
Two (2) DCE MDP Power Supplies Cards provide full redundancy
and are available for any voltage in the range of 9-150VDC and 9275VAC. A single DCE MDP Power Supply Card powers eighteen
(18) Modem Cards. A second DCE MDP Power Supply Card, if installed, provides automatic backup in the event of a failure of the
primary DCE MDP Power Supply Card.
EIA Standards
Compliant with EIA Standard EIA-310-C
Modem Interface Connectors (Rear)
Serial RS232: DB25F
Analog Port: RJ11
LEDs (Front)
(Top to bottom)
DTR: Data Terminal Ready
TXD: Transmit Data
RXD: Receive Data
MR: Modem Ready
CD: Carrier Detect
RTS: Request to Send
CTS: Clear to Send
RI: Ring Indicator
Power Requirements
AC Power: 9 to275VAC – Fused Socket (IEC 320)
DC Power: 9 to 150VDC – Screw Terminals – 9 to 150VDC
Dimensions
Width: 19”
Depth:
Height: 5.25” (3U)
Environmental
Operating Temperature: -20 to +85 Degrees Celsius
157
DATA CONNECT ENTERPRISE
PHONE: 301.924.7400 EXT 17
3405 OLANDWOOD CT
FAX: 301.924.7403
OLNEY, MD 20832
USA
www.data-connect.com
INDUSTRIAL SOLUTIONS
NETWORK ANYWHERE
SERIAL DATA& MODEM EXTENSION
DISTANCE CHART
158
DCE PE14.4L
FEATURES
Modem Interface Units 5V logic (TTL)
Simple send and receive signals
14400kbps 2-wire dial-up line modem
5V logic (TTL) power supply
IEC801-4 surge protection
-40°C to +85°C operating temperature
For meters, relays, SCADA etc.
To service the growing need for efficient, reliable data communication
in harsh environments of utility substations and industrial facilities,
DCE has developed a series of OEM PCB modems that can operate at
5V logic (TTL) or simple send and receive signals and survive high
surge levels and extreme heat and cold. All this without compromising
the performance expected from state-of-the-art communication devices. With the rapid move toward “intelligent” substations, where meters, relays, RTUs, SCADA systems, etc. are able to “talk” to a remote
operator, communication devices such as modems are moving off the
desktop and into the meters, RTUs, and SCADA units where the conveniences of a standalone modem is unacceptable. Data Connect Enterprise has addressed this problem by developing
the PE14.4L OEM modem designed specifically for harsh environments.
The PE14.4L OEM modem is highly sophisticated full duplex, V.32bis
data modem that is designed to interface with RS232, RS485 (external
device), 5V logic (TTL) or simple send and receive signals. The PE14.4L
OEM modem operates at half and full duplex 2 & 4-Wire Leased Lines.
Private line distance is up to 5 miles. The PE 14.4L PCB can be found
in the MIU14.4 modem, MD14.4 modem card, and the MIU-PP14.4 modem.
ORDERING INFORMATION
DCE/PE14.4L
Data Connect V.32bis, 14.4Kbps OEM (PCB) Modem
SPECIFICATIONS
Modem Line Speeds:
Asynchronous 14000, 9600, 4800, 2400, 1200, 300bps
Standards:
V.32bis, V.32, V.22bis, Bell 212A, Bell 103
Transmission line:
2 or 4-Wire Leased Lines
Private Line at a distance up to 5 miles
Compatibility:
Hayes Extended AT Command Set
Power:
5V logic (TTL)
Card size:
3.4” x 0.01” x 0.5”
Digital port:
DTE 8-pin, simple send/receive signals
Analog port:
RJ11 modular jack
Surge protection (Power line):
8kV (exceeds IEC801-4) (20kV [IE801-5] available if required)
Surge protection (Analog line):
5kVAC
Environment:
-40°C to +85°C, 0-95% humidity (non condensing)
Certifications:
FCC part 68, industry Canada
158
DATA CONNECT ENTERPRISE
PHONE: 301.924.7400 EXT 17
3405 OLANDWOOD CT
FAX: 301.924.7403
OLNEY, MD 20832
USA
www.data-connect.com
INDUSTRIAL SOLUTIONS
NETWORK ANYWHERE
SERIAL DATA& MODEM EXTENSION
IG192HFP
159
DCE IG192HFP
SPECIFICATIONS
The IG192HFP industrial grade 19.2 kbps hyper fast poll modem is
designed to operate over 4-wire full duplex or 2-wire half duplex unconditional leased lines or private metallic circuits. For optimum performance,
the modem employs QAM modulation and Viterbi decoding scheme along
with its adaptive equalizer to communicate over a variety of private transmission lines at a distance up to 16.1 miles. The IG192HFP supports DTE/
RTUs with an EIA RS-232 and RS-485 serial port at speeds of 19200, 9600,
4800, 2400 and 1200 bps. With its Auto-RTS mode, the modem can support DTE/RTUs with 3-wire serial interface (TD, RD, SG) in multi-point
polling applications.
The triple mode capability allows the IG192HFP industrial grade 19.2
kbps hyper fast poll modem to communicate with older generating
DSP9612FP at up to 9600 kbps and both the Bell 202T and V.23 FSK modems at up to 1200 bps.
The IG192HFP industrial grade 19.2 kbps hyper fast poll modem is
designed to operate over a wide range of AC or DC power supply voltages
and temperatures. With proven reliability and ease of installations, the
IG192HFP is deal for point-to-multipoint polling networks, where fast
training time and low network latency are critical for system performance.
ORDERING INFORMATION
DCE/IG192HFP
DCE/IG192HFP-LV
)DCE/IG192HFP-HV
DCE/IG192HFP-RM
DCE/192HFP-WMB
STANDALONE (100-240VAC)
STANDALONE (10-48 VDC
STANDALONE (100-240 VAC, 85-400 VDC)
RM16M RACK-MOUNT MODULE
WALL-MOUNT/PANEL-MOUNT KIT
TRIPLE MODE:
Hyper Fast Poll mode at 19200bps. 17.4 ms RTS-CTS delay QAM
mode at 9600/4800/2400bps. 23 ms RTS-CTS delay FSK mode
for both Bell 202T (0-1800bps) and V23 (0-1200bps)
DTE/RTU INTERFACE:
RS-232 interface with full control signals support (DB-9F) RS485/RS422 support, 4-wire F.D., or 2-wire H.D. Auto RTS and
forced RTS options to support 3-wire interface
LEASED LINE INTERFACE:
TELCO 2- or 4- wire conditioned or unconditioned lines Private
metallic 2 or 4 wire circuits
Private Line at a distance up to 16.1 miles
Cable equalizers for long distance over standard cables
MECHANICAL:
Enclosure dimensions: 5.0” (W) x 6.75”( L) x 1.3” (H)
127mm (W) x 172mm (L) x 33mm (H)
DIAGNOSTIC:
Local or remote Analog + digital loopback eight (8) front panel
LEDS for status monitoring
AC and DC Power Support:
Standalone: 10-48 VDC, 85-400 VDC, 100-240 AC Rack Mount
Module: Plug-in RM16M modem rack
ENVIRONMENTAL:
Operating temperature: -40 to 85 Degrees Celsius
Storage temperature: -40 to 100 Degrees Celsius
Humidity: up to 95%, non-condensing
OPTIONAL MOUNTING KITS:
Wall-mount or panel mount kit DIN rail mounting kit
POWER + CURRENT CONSUMPTION:
125 mA @ 12 VDC
28.0 mA @ 48 VDC
159
DATA CONNECT ENTERPRISE
PHONE: 301.924.7400 EXT 17
3405 OLANDWOOD CT
FAX: 301.924.7403
OLNEY, MD 20832
USA
www.data-connect.com
INDUSTRIAL SOLUTIONS
NETWORK ANYWHERE
SERIAL DATA& MODEM EXTENSION
V.3600LP
160
DCE V.3600LP
Remote access modem offer significant cost savings and reduce network downtimes by eliminating the need to dispatch personnel to remote
sites to reconfigure alarm and control systems, phone switches, diagnostic ports, remote access servers, and supervisory channels.
However, these benefits come with the risk that unauthorized access to
remote facilities could disrupt your network and cripple your business
operation with the Data Connect V.3600LP+ Series family of remote access modems, it is no longer necessary to accept the security risk associated with unprotected remote access installations. Data Connect ‘s
V.3600LP+ series provides the full range of advanced modem features
found in our series V.3600LP family, combined with a comprehensive set
of security and access control features.
If you are managing highly secure remote access points, The
V.3600LPseries modems offer the most advanced security features available. Now you can access remote configuration, diagnostic, console
ports, and supervisory and control channels over secure connections.
With the V.3600LP Series, password protection, the cornerstone of most
security strategies, can augment with a wide range of feature options.
These features can be used to implement the multi-faceted type of access
control recommended by most security experts. In addition, a comprehensive audit trial provides a historical view of access attempts, allowing
your security personnel to identify “at risk” facilities.
Private line distance is up to 5 miles.
FEATURES
Non-registered numbers will not receive modem supervision.
Closed User Groups- Built in challenge response algorithms may be enabled to create closed user groups of DCE security modem
Automatic Call Back-Is configured to initiate a call back to a users modem,
insuring that access is originated from known terminal or locations.
Password Aging –Insures that passwords are changed on a specified
schedule.
Enforced Syntax- Implements password policies with regards to alpha, numeric and control type characters
Audit Trial with Precision Time Keeping-With the audit trial facilities, there is
never a question about who has gained access or who has tried to gain
access of your installation. All attempts to access a V.3600LP+ series device
are stored in a nonvolatile audit trail along with the date and time.
ORDERING INFORMATION
DCE/V3600LP
V3600 LOW PROFILE
SPECIFICATIONS
Remote Configuration- The remote configuration facilities of V.3600LP+
Series modem will allow you to remotely maintain passwords, review the
audit trial or modify any parameter of the device. Additional configuration
commands allow you to select DTE bit rate, character length and parity.
Remote configuration access may be restricted to specific passwords.
Device Management Software- This optional software automates audit trial
data collection and simplifies password management for large, distributed
networks.
Feature Overview
Standard 2-wire dial-up & 2/4 wire Leased Line
Private Line at a distance up to 10 miles
AT Command Set
Standard Error Correction and compression
RS-232 Asynchronous DTE Support Remote Configuration
See LP Series datasheet for a complete description of modem capabilities
Data Compatibility– V.34bis, V.34, V.32bis, V.32, V.22bis, V.22, V.23, V.21,
Bell 212A, Bell 103j
DTE Interface- Physical- DB9 connector Electrical-RS-232F (V.24). Asynchronous: Auto baud or selectable formats and rates to 11.2Kbps with
V.32bis
Auto Dial Modes- Standard AT compatible dial commands or DTR dial of
stored number.
Answer Modes- Standard auto answer or manual answer under DTE control.
Error correction- V.42 and MNP 2-4 error correction
Data Compression- V.42bis and MNP5 data compression
Configuration Control- Standard AT commands for both local and remote
configuration
Diagnostic- V54 throughout AT commands
Network Interface- 2-wire, pulse or DTMF dial.
XMT level: -12dBm
RCV sensitivity: -43dBm
Power- Standalone units automatically adjust to 14-54VDC
Standard S1900 Rack mount unit automatically adjust to 85-265VAC, 27440Hz. Optional 48VDC supply.
Environmental- Operating temperature range:
-20˚C to 70˚C. Humidity: 90% non-condensing
Approvals- FCC part 68& part 15, class A
Optional: international approvals available
160
DATA CONNECT ENTERPRISE
PHONE: 301.924.7400 EXT 17
3405 OLANDWOOD CT
FAX: 301.924.7403
OLNEY, MD 20832
USA
www.data-connect.com
INDUSTRIAL SOLUTIONS
NETWORK ANYWHERE
SERIAL DATA& MODEM EXTENSION
3342LP
161
DCE 3342LP
Remote access modem offer significant cost savings and reduce network downtimes by eliminating the need to dispatch personnel to remote
sites to reconfigure alarm and control systems, phone switches, diagnostic ports, remote access servers, and supervisory channels.
However, these benefits come with the risk that unauthorized access to
remote facilities could disrupt your network and cripple your business
operation with the Data Connect V.3600LP+ Series family of remote access modems, it is no longer necessary to accept the security risk associated with unprotected remote access installations. Data Connect ‘s
V.3600LP+ series provides the full range of advanced modem features
found in our series V.3342LP family, combined with a comprehensive set
of security and access control features.
If you are managing highly secure remote access points, The 3342LP
series modems offer the most advanced security features available. Now
you can access remote configuration, diagnostic, console ports, and supervisory and control channels over secure connections. With the 3342LP
Series, password protection, the cornerstone of most security strategies,
can augment with a wide range of feature options. These features can be
used to implement the multi-faceted type of access control recommended
by most security experts. In addition, a comprehensive audit trial provides a historical view of access attempts, allowing your security personnel to identify “at risk” facilities.
Private line distance is up to 5 miles.
FEATURES
Non-registered numbers will not receive modem supervision.
Closed User Groups- Built in challenge response algorithms may be enabled to create closed user groups of DCE security modem
Automatic Call Back-Is configured to initiate a call back to a users modem,
insuring that access is originated from known terminal or locations.
Password Aging –Insures that passwords are changed on a specified
schedule.
Enforced Syntax- Implements password policies with regards to alpha, numeric and control type characters
Audit Trial with Precision Time Keeping-With the audit trial facilities, there is
never a question about who has gained access or who has tried to gain
access of your installation. All attempts to access a V.3600LP+ series device
are stored in a nonvolatile audit trail along with the date and time.
ORDERING INFORMATION
DCE/3342LP
V.34BIS LOW PROFILE
SPECIFICATIONS
Remote Configuration- The remote configuration facilities of V.3600LP+
Series modem will allow you to remotely maintain passwords, review the
audit trial or modify any parameter of the device. Additional configuration
commands allow you to select DTE bit rate, character length and parity.
Remote configuration access may be restricted to specific passwords.
Device Management Software- This optional software automates audit trial
data collection and simplifies password management for large, distributed
networks.
Feature Overview
Standard 2-wire dial-up
AT Command Set
Standard Error Correction and compression
RS-232 Asynchronous DTE Support Remote Configuration
See LP Series datasheet for a complete description of modem capabilities
Data Compatibility– V.34bis, V.34, V.32bis, V.32, V.22bis, V.22, V.23, V.21,
Bell 212A, Bell 103j
DTE Interface- Physical- DB9 connector Electrical-RS-232F (V.24). Asynchronous: Auto baud or selectable formats and rates to 11.2Kbps with
V.32bis
Auto Dial Modes- Standard AT compatible dial commands or DTR dial of
stored number.
Answer Modes- Standard auto answer or manual answer under DTE control.
Error correction- V.42 and MNP 2-4 error correction
Data Compression- V.42bis and MNP5 data compression
Configuration Control- Standard AT commands for both local and remote
configuration
Diagnostic- V54 throughout AT commands
Network Interface- 2-wire, pulse or DTMF dial.
XMT level: -12dBm
RCV sensitivity: -43dBm
Power- Standalone units automatically adjust to 14-54VDC
Standard S1900 Rack mount unit automatically adjust to 85-265VAC, 27440Hz. Optional 48VDC supply.
Environmental- Operating temperature range:
-20˚C to 70˚C. Humidity: 90% non-condensing
Approvals- FCC part 68& part 15, class A
Optional: international approvals available
161
DATA CONNECT ENTERPRISE
PHONE: 301.924.7400 EXT 17
3405 OLANDWOOD CT
FAX: 301.924.7403
OLNEY, MD 20832
USA
www.data-connect.com
INDUSTRIAL SOLUTIONS
NETWORK ANYWHERE
SERIAL DATA& MODEM EXTENSION
V.3600UI
162
DCE V.3600UI
The Data Connect V.36UI series is a series of high performance,
synchronous and asynchronous, full-duplex, multi-standard standalone or rack mounted modem. They are designed for use on 2wire dial-up and 2/4-wire leased line circuits. Private line distance
is up to 10 miles
The Data Connect V.3600UI series is fully compliant with ITU-T
V.34 as well as being compatible with ITU-T recommended V.32bis/
V.32, V.22bis, V.23 and V.21 international standards while operating at 33600, 31200, 28800, 26400, 24000, 21600, 19200, 16800,
14400, 1200, 9600, 7200, 4800, 2400, 1200 and 300 bits per second.
In V.34 mode the Data Connect V.3600UI series provides full
duplex operation at up to 33.6Kbps on a 2/4-wire PSTN line, with
features like line probing, symbol rate, and carrier frequency automatic selection. a range of performance enhancing techniques are
available for V.34 mode, including adaptive pre-coding, adaptive re
-emphasis, non-linear encoding (warping), constellation expansion, multi dimensional trellis coding, transmission power back-off
(power drop), V.8 standard modem initialization, and shell mapping.
An in-band secondary channel allows the user to monitor and
control the remote site unit. The Data Connect V.3600UI series also
offers auto callback and leased-line security checks in addition to
dial-up security checks.
The Data Connect RM16MUI series can accommodate up to 16
modem cards with 16 ports, control unit and single or dual redundant power unit, it also dual redundant power supply which means
if one power does fail the other one is capable of powering the
entire rack.
FEATURES
Fully compatible with ITU-T V.34+/V.34/V.32bis/V.32/V.26bis/V.22bis/V.22/V.23/
V.21/V.24/V.28/V.25bis/V.54/V.52/V.42/V.42bis/V.14/V.13/V.8 and Bell 212A/103
19” rack accommodates up to 16 modem cards with hot-swap and profile copy
functions
Achiever throughput up to 115200bps V.13 simulated carrier in half-duplex
MNP4®, V.42 error correction
MNP5®, V.42bis data compression
Extended AT and ITU-R V.25bis command set
Leased lines dial back-up and restore in manual or auto mode
Auto fallback and fall forward
Remote configuration via secondary channel
Front panel lock and password protect
Password & callback security
Diagnostic capabilities:
Analog loopback and remote, digital loopback (with pattern or not); BERT test
pattern using 511
Auto manual dialing/answer
Front panel configuration via rubber switches and LCD
Front panel key reset function
G3FAX send/receive compatible with EIA-578 Class 1 FAX command (optional)
ORDERING INFORMATION
DEC/V3600UI
DCE/V3600UI-48
DCE/V3600UI-24
V3600UI STANDALONE 100-240VAC
V3600UI STANDALONE 48VDC
V3600UI STANDALONE 24VDC
SPECIFICATIONS
Compatibility:
V.34+: 33.6/31.2 Kbps SM (4D TCM)
V.34+: 28.8/ 26.4/24/21.6/19.2/16.8/14.4/12/9.6/7.2/
4. 8/2.4 Kbps SM (4D TCM)
V.32bis: 14400/12000/7200bps TCM
V.32: 9600bps TCM, 9600/4800 bps QAM
V.26bis: 2400/1200bps QAM, 1200bps BPSK
V.22/Bell 212A: 1200bps DPSK
V.23: 1200/75, 600/75bps FSK
V.21/Bell 103:300 bps FSK
Symbol Rate (Baud) and Carrier Frequency(Hz):
2400 Baud- 1600/ 1800 Hz
2800 Baud- 1680/ 1867 Hz
3000 Baud- 1800/2000 Hz
3200 Baud- 1829/ 1920 Hz
3429 Baud- 1959 Hz
Data Format:
Synchronous or Asynchronous
Total bit length: 8, 9, 10, and 11
Data Speed:
Asynchronous- 75/300/600/1200/2400/4800/7200/
12000/14400/168/19200/21600/2400/26400/28800/
31200/33600/38400/57600/76800/115200 bps
Synchronous- 1200/2400/4800/7200/9600/12000/
144400/16800/19200/21600/24000/26400/28800/
31200/33600 bps
DTE Interface: EIA RS-232C, ITU-T V.24/V.28
Line Requirement: Dial-up line, 2/4-wire leased line
Private Line at a distance up to 10 miles
Transmit Level:
Dial-up line: 0 to -15dBm; Leased line: 0 to -31dBm
Receive Dynamic Range: -4 to -43/ 0 to -33dBm
Equalization: Automatic adaptive EQ
Call Progress Monitoring:
Dial tone, Ring, Ring-back, Busy and backup dial
Line Status Monitoring:
TX level, RX level, S/N ratio, EQM value, delay, phase jitter, frequency offset, farend echo, DTE format, retrain count, TX baud rate, RX baud rate, TX carrier, RX
carrier, TX speed, RX speed, TX power back-off level, Interface lead monitoring .
Memory:
Non-volatile; 2user profiles and 10 phone numbers with 30 characters each
Line Interface: RJ-11 for dial-up, JM8 (like RJ45) for leased line
Transmit Clock: Internal, Loopback, or External
Dialing Command and Type:
Extended AT and V.25bis using Tone/Pulse/Mixed
Flow Control: RTS/CTS, XON/XOFF, CTS only
Enclosure dimensions: 7.1” W x 10.3”L x 1.9”H; 4.2 Ibs
Rack Mount dimensions: 18.9” W x 14.9”L x 8.7”H
Temperature: Operation: 0˚ to +50˚C,
Storage: 0˚ to +50˚C
Humidity: Up to 95% (non-condensing)
DCE/V3600UI-RM V3600UI RACKMOUNT MODEM
DCE/RM16MUI
16 SLOT CHASSIS 100-240VAC REDUNT. PWR
DCE/RM16M-48
16 SLOT CHASSIS 48VDC REDUNDANT PWR
162
DATA CONNECT ENTERPRISE
PHONE: 301.924.7400 EXT 17
3405 OLANDWOOD CT
FAX: 301.924.7403
OLNEY, MD 20832
USA
www.data-connect.com
INDUSTRIAL SOLUTIONS
NETWORK ANYWHERE
SERIAL DATA& MODEM EXTENSION
SWM910A
163
DCE SWM910A
FEATURES
Up to 115kbps continuous throughout
Extremely Robust Long Range Frequency-Hopping Data Radio
Transparent Communications
Low Latency adding Little Overhead
Supports Point-to-Point, Point-to-Multipoint, Repeater, TDMA
Supports TDMA Mode through Units Configured as a Repeater
Adjustable Transmit Power (100mW 1W)
SPECIFICATIONS
As industry leaders for extremely robust and reliable license-free
data transfer, the Data Connect SS910A provides up to 115kbps serial
communications over distances up to 62 miles (100km). Flexible configuration options allow for various network topologies.
Data Connects proprietary radio technology excels in the most
demanding RF and physical environments. The Data Connect SS910A
is easily configured through a convenient AT Command Serial Interface. Users have the ability to deploy a wide range of network styles
including repeaters and multipoint. The master she can diagnose the
performance and modify the operating parameters of any remote slave
unit.
The following are applications for the SS910A.
SCADA
Telemetry
Vehicle Detail Tracking
Utilities / Metering
Display Signs
Traffic Control
Many More
The SS910A provides a very high Interference and noise rejection
allowing reliable communication in high power cellular and paging
environments. The repeater units can also act as a slave with no restrictions on the number of repeaters in the system. Internal CRC and
user-selectable forward error correction ensures reliable transmission.
Frequency:
Spread Method:
Output Power:
Sensitivity:
Data Rate:
Range:
Rejection:
Operating Modes:
Hopping Patterns:
Diagnostics:
Error Detection:
Data Interface:
RS232 Signals:
and
Input Voltage:
Power Consumption:
LED Indicators:
Connectors:
Antenna:
Data:
Environmental:
Temperature:
Humidity:
Weight:
Dimensions:
Enclosure:
Mount:
Approvals:
902-928 MHz
Frequency Hopping
1W User Configurable
-108dBm
1200 to 115.2kbps Uncompressed
62+ miles (100+km) dependent on link
rate and line of sight
70dB Out of Band, 60dB In Band 50dB
Adjacent Channel
Point-to-Point, Point-to-Multipoint,
Store & Repeater, TDMA Multi-master
64 User Selectable
Remote Control, Remote Statics,
Remote Diagnostics
32bis of CRC with Optional REC
Asynchronous RS232 Optional
RS422/RS485
GRD, TXD, RXD, CTS, RTS, DTR, DRS
DCD
10-30VDC
450mA Max at 12V & 1W TX Power
250mA MAX at 12V & 1W TX Power
Power, TX, RX, RSSI
RP-TNC Female Bulkhead
RS232 (DB-9F)
Locking Screw Connector
-40°C to +85°C
5-95% Non-Condensing
420g
111mm L X 95.3mm W X 44.5mm H
Extruded Aluminum
Panel Mount
FCC Part 15.247
IC RSS210
163
DATA CONNECT ENTERPRISE
PHONE: 301.924.7400 EXT 17
3405 OLANDWOOD CT
FAX: 301.924.7403
OLNEY, MD 20832
USA
www.data-connect.com
INDUSTRIAL SOLUTIONS
NETWORK ANYWHERE
SERIAL DATA& MODEM EXTENSION
DCE SFM
164
DCE SFM
SPECIFICATIONS
The Data Connect Serial Fiber Modem Provides a fiber modem solution to
extend RS232 or RS485 transmission distance up to 2km over multimode
fiber or up to 120km over single mode fiber. The modem is equipped with
multiple interface circuits, fro connection to RS232, RS423, or RS485/422
(2 or 4 wire). The DCE SFM secures data transmission over EMI resistant
fiber at speeds up to 256kbps for RS232 or up to 1024kbps for RS422/
RS485. When the DCE SFM is linked to the DCE SFM-RM card, it allows
network engineers to get greater functionality through advanced SNMP
features. The network administrator can manage any serial fiber modem
module from anywhere on the network and detect any link loss and maintain each loop.
FEATURES
Extend serial transmission from 2 to 120km over fiber
Selectable data I/F for RS232/423/422/485/TTL
Selectable two or four wire RS485/422
Selectable three to five wire RS232/423
SNMP management features with SFM Chassis
Speeds up to 256kbps for RS232 (Async mode)and RS423
Speeds up to 1024kbps for RS485/422 and TTL
Support auto-adjustment function, no extra attenuators needed
Interfaces:
6 pin screw block connector for RS485/RS232/RS422 serial asynchronous ports and SC, ST, or FC 155M fiber ports
Operating wavelengths:
1310nm or 1550nm, MM, SM, WDM
Operating distance:
2Km on 62.5/125um fiber, up to 120Km on 9/125um fiber
Optical Connector:
SC, ST or FC available
Front LEDs:
PWR, Data, Test, Fiber Link
Power:
External 90-260VAC switching adapter 12VDC@1A with NEMA1-15(2
blades only), US type main plug
Temperature:
0-50°C (Operating); 0-70°C (Storage)
Humidity:
20-80% non-condensing (Operating); 0-90% (Storage)
Consumption:
less than 5W
Dimension (W x D x H):
85.6mm x 122.6mm x 20mm
Weight:
310g (without AC adapter)
Compliance:
CE, FCC Class A
MTBF:
257,063 hours
ORDERING INFORMATION
DCE/SFM FIBER
MODEL
TYPE
DCE/SFM-LV
DCE/SFM-HV
DCE/SFM-RM
DCE/RM16-SFM
FIBER
CONNECTOR
S: Single
ST
M: Multi
SC
W: WDM
FC
CONNECTIVITY
DISTANCE
002: 2km
015: 15km
030: 30km
050: 50km
080: 80km
120: 120km
*020A: 20km (WDM only)
*020B: 20km (WDM only)
*040A: 40km (WDM only)
*040B: 40km (WDM only)
*060A: 60km (WDM only)
*060B: 60km (WDM only)
*020A must be used with 020B
*040A must be used with 040B
*060A must be used with 060B
164
DATA CONNECT ENTERPRISE
PHONE: 301.924.7400 EXT 17
3405 OLANDWOOD CT
FAX: 301.924.7403
OLNEY, MD 20832
USA
www.data-connect.com
INDUSTRIAL SOLUTIONS
NETWORK ANYWHERE
SERIAL DATA& MODEM EXTENSION
DCE HS-SFM & SHS-SFM
165
DCE HS-SFM & SHS-SFM
SPECIFICATIONS
STANDARD
LEDs
AC
ACDC
Environmental
Temperature
Humidity
Power Consumption
The Data Connect High Speed Serial Fiber modem is a fiber modem for V.35, RS232, and RS530, X.21 or RS449 high speed
(2.048Mbps) synchronous or low speed synchronous and asynchronous data transmission over optical fiber media. The Data
Connect Super High Speed Serial Fiber Modem is a high speed
fiber modem for V.35, RS530, X.21 or RS449 super high-speed
(8.192Mbps) synchronous data transmission over optical fiber
media. When the DCE HS-SFM-RM or the DCE SHS-SFM-RM is
placed in the DCE RM16-F3U rack with SNMP management, the
card status, type, version, fiber link status, data link status and
alarms can all be displayed. Configuration is also available to
enable or disable the port, reset the port, set the data rate, modify
the clock mode and initiate local or far end loop back tests.
FEATURES
1 Port data communication on HDB26 female (adapter cable required)
Network management via terminal or SNMP in DCE RM16-F3U
chassis
Optical Bit Error Rate less than 10 to the -11 power
User selectable n x 64Kbps for the DCE HS-SFM & n x 256Kbps
for DCE SHS-SFM data rate
Dimensions
(D x W x H)
Weight
AC
ACDC
AC
ACDC
AC
ACDC
Compliance
MTBF
DESCRIPTION
PWR, Fiber Link, TD, RD,
RTS, CTS DCD, Test mode Power
External AC adapter,
9VDC@1A
100-240VAC+ or – 10% &
48VDC
0 to 50°C (Operating)
0 to 70°C (Storage)
20 to 80% non Condensing
(Operating)
10 to 90% non Condensing
(Storage)
<5W
<5W
3-3/8 x 4-13/16 x 13/16 inches
3-3/8 x 7-9/16 x 1-3/16 inches
.44 lbs
1.21 lbs
CE, FCC Class A
257, 063 Hours
ORDERING INFORMATION
Product Type
Copper
Interface
Type
DCE/HS-SFM-AC
V35
DCE/HS-SFM-ACDC RS232
DCE/HS-SFM-RM
RS530
DCE/SHS-SFM-AC
X21
DCE/SHS-SFM-ACDC RS449
DCE/SHS-SFM-RM
Fiber Connector
Type
ST
SC
LC
Connectivity
Distance
002: 2km
015: 15km
030: 30km
050: 50km
080: 80km
120: 120km
*020A: 20km [WDM only]
*020B: 20km [WDM only]
*040A: 40km [WDM only]
*040B: 40km [WDM only]
*060A: 60km [WDM only]
*060B: 60km [WDM only]
*020A must be used with 020B
*040A must be used with 040B
*060A must be used with 060B
165
DATA CONNECT ENTERPRISE
PHONE: 301.924.7400 EXT 17
3405 OLANDWOOD CT
FAX: 301.924.7403
OLNEY, MD 20832
USA
www.data-connect.com
INDUSTRIAL SOLUTIONS
NETWORK ANYWHERE
INDUSTRIAL SERVERS & SWITCHES
CHART
166
INDUSTRIAL ETHERNET SERIAL SERVERS & SWITCHES CHART
MODEL
ETHERNET
SERVER TO
10/100# OF
SWITCH
SERIAL
BASE-T PORTS
DATA
WALL
DIN
PHOTO PAGE
MOUNT MOUNT
DCE/EPORT-101
√ √ 1 SERIAL
√ √ 168
DCE/EPORT-102
√ √ 2 SERIAL
√ √ 168
DCE/EPORT-104
√ √ 4 SERIAL
√ √ 169
DCE/ANS205CR
√ √ 5
ETHERNET
√ 170
DCE/ANS208
√ √ 8
ETHERNET
√ 171
166
DATA CONNECT ENTERPRISE
PHONE: 301.924.7400 EXT 17
3405 OLANDWOOD CT
FAX: 301.924.7403
OLNEY, MD 20832
USA
www.data-connect.com
INDUSTRIAL SOLUTIONS
NETWORK ANYWHERE
INDUSTRIAL SERVERS & SWITCHES
IN THIS SECTION & THE TECHNOLOGY
167
IN THIS SECTION
TECHNOLOGY
SPEED
PAGE
INDUSTRIAL ETHERNET SERIAL
SERVERS
10/100BASE-T
168, 169
INDUSTRIAL SWITCHES
10/100BASE-T
170, 171
THE TECHNOLOGY
Ethernet Serial Server allows a "remote" serial port to connect any LAN connected workstation via telnet or portredirector software. The Ethernet Serial Server also connects any two asynchronous serial devices through a LAN,
even via routers, when used in client-server. The Ethernet Serial Server is often used with serial devices such as remote data collection terminals, SCADA, building automation equipment, UPS's, bar code scanners, or climate control
devices. It is used to connect serial management ports directly to an Ethernet network for "in-band" control of "out-of
-band" devices. For this application, simply telnet to the serial management port of the connected device or use inexpensive (or free) port redirector software.
The network switch plays an integral part in most modern Ethernet Local Area Networks (LANs). Mid-to-large sized
LANs contain a number of linked managed switches. Small Office or Home Office (SOHO) applications typically use a
single switch, or an all-purpose converged device such as a residential gateway to access small office/home broadband services such as DSL or Cable Internet. In most of these cases, the end-user device contains a router and components that interface to the particular physical broadband technology. User devices may also include a telephone
interface for VoIP.
An Ethernet switch operates at the data link layer of the OSI model to create a separate collision domain for each
switch port. With 4 computers (e.g., A, B, C, and D) on 4 switch ports, A and B can transfer data back and forth, while
C and D also do so simultaneously, and the two conversations will not interfere with one another. In the case of a
hub, they would all share the bandwidth and run in half duplex, resulting in collisions, which would then necessitate
retransmissions. Using a switch is called micro segmentation. This allows computers to have dedicated bandwidth
on point-to-point connections to the network and to therefore run in full duplex without collisions.
At Data Connect, we offer a wide range of products to suite your network needs. We can assist you in finding a
solution that maximizes your investment while providing the solutions that will benefit your customers both now and
for years to come. With the ability to use DCE Industrial Ethernet Servers and Switches at your locations, Ethernet to
Serial conversion and temperature rated LAN switching requirements are cost effective and for both your normal and
harsh operating environments.
167
DATA CONNECT ENTERPRISE
PHONE: 301.924.7400 EXT 17
3405 OLANDWOOD CT
FAX: 301.924.7403
OLNEY, MD 20832
USA
www.data-connect.com
INDUSTRIAL SOLUTIONS
NETWORK ANYWHERE
INDUSTRIAL SERVERS & SWITCHES
EPORT 101 &102
168
DCE EPORT 101 & 102
SPECIFICATIONS
The Data Connect Eport 101/102 Ethernet Serial Server connects
RS232, RS422 and RS485 serial devices to an Ethernet LAN/WAN providing a reliable communication connection. The Eport 101/102 Windows driver installs virtual COM ports in the Device Manager of the
operating system. The virtual COM port is designed to establish a connection with the connected serial device in the same manner as a device connected to the COM port in a PC. The LAN becomes transparent
to the serial device and the software running on the PC. The Eport
101/102 also offers a heart beat feature to insure reliable communications connection.
The Eport 101/102 can be configured as a TCP client/server or UDP.
The E-port 101 operates in “Direct IP Mode”, “Virtual COM Mode” and
“Paired Mode.” Direct IP connection allows applications using TCP/IP
or UDP/IP network socket programs to communicate with asynchronous serial port on the Eport 101/102. In this type of application the
Eport 101/102 is configured to TCP or UDP server. The socket program
running on the PC establishes a communication connection with the
Eport 101/102. The raw data is sent directly to and from the serial port.
The Virtual COM mode requires the installation of the virtual COM
port device driver. In this mode, the Eport101 must be set to either TCP/
server or UDP/server in the menu with a designated communication
port number. The virtual COM driver is a TCP or UDP client. Once the
connection is made, the LAN is transparent to the serial device. Applications work just as if the serial device is connected a host’s physical
COM port. The virtual COM port converts the application’s data into IP
packet destined for the Eport 101/102, which in turn converts the IP
packet back to serial data.
Paired mode is also called serial tunneling. When this type of configuration is selected, no additional software is needed to install in the
host PC. In fact a PC is not required to make the connection. Any to
dumb serial devices that can communicate with each other through a
serial link will be able to communicate using two Eport101/102s and the
LAN. Two Eport 101/102s are configured with one setup as a TCP or
UDP client and the other to TCP/UDP server. When setting up the
server, the remote IP address section must contain the address of the
client. This will allow the client’s IP address to pass the IP address filtering features of the server. Conversely, the remote IP address of the
client must contain the server address.
The Eport 101/102 provides a convenient way to establish reliable
communications between two devices. Communication port 5300 is
reserved for the Heart beat protocol if a loss connection occurs the
heart beat feature will try to reconnect the TCP data connection every 5
seconds until communication is established again.
Eport 101/102 will work at Loop Back Mode, all data is sent back
immediately. This feature makes connection testing easy.
Serial Buffer:
Output 64Kbytes- Input 8k bytes per port
Serial Connection:
DTE-DB9 Male
LAN:
10/100 Mbps Auto-Detecting 10 Base T, 100Base TX
Serial Interfaces:
RS232 TX, RX, RTS, CTS, DTR, DSR, DCD, GND
RS422 TX+, TX-, RX+, RX-, RTS+, RTS-, CTS+, CTS-,
GND
RS485 Data+, Data- and GND
Data Rate:
110bps to 230.4kbps
Parity:
None, Even, Odd, Mark and Space
Data Bits:
5, 6, 7, or 8
Stop Bits:
1, 1.5, or 2
Protocol:
TCP, IP, ARP, DHCP, Telnet, HTTP, UDP, & ICMP
Management:
Manager Software, Serial Console, Telnet, Web
Server, Firmware upgradeable
Dimensions:
8.5cmL x 11.5cmW x 2.3cmH
Power Requirements:
9-15VDC, 300mA
Operating Temperature:
0˚C to 50˚C
Storage Temperature:
-20˚C to +60˚C
Humidity:
0-90% Non-condensing
Approvals:
CE, FCC
FEATURES
DIN Rail or Panel Mount
Support 10/100Mbps Ethernet
Supports RS232, RS422, & RS485 Serial Interface
Supports LAN & WAN Communications
In Server Mode Supports Individual Client Sessions for
Security
Management Access Password Protected
Virtual COM drivers for Windows NT/ 98/ME/2000/XP
Supports Socket Connection, TCP server, TCP Client, and
UDP
Supports up to 2 TCP Connection in TCP Server Mode
Heart Beat Connection Guard against Power Failure and
Network description.
Supports Loop Back Mode Testing
168
DATA CONNECT ENTERPRISE
PHONE: 301.924.7400 EXT 17
3405 OLANDWOOD CT
FAX: 301.924.7403
OLNEY, MD 20832
USA
www.data-connect.com
INDUSTRIAL SOLUTIONS
NETWORK ANYWHERE
INDUSTRIAL SERVERS & SWITCHES
EPORT 104
169
DCE EPORT 104
The DCE Eport-104 Ethernet serial server connects RS-232, 422,
485 serial devices to an Ethernet LAN/WAN providing a reliable communication connection. The DCE Eport-104 Windows driver installs virtual
COM ports in the Device Manager of the operating system. The virtual
COM port is designed to establish a connection with the DCE Eport-104.
This in turn will allow communications with the connected serial device in
the same manner as a device connected to the COM port in a PC. The
LAN becomes transparent to the serial device and software running on
the PC. The DCE Eport-104 also offers a Heart Beat feature to insure a
reliable communications connection.
The DCE Eport-104 can be configured as a TPC Client/Server or
UDP. The DCE Eport-104 operates in “Direct IP Mode”, “Virtual COM
Mode”, and “Paired Mode”.
In Direct IP Mode the Direct IP connections allow applications
using TCP/IP or UDP/IP network socket programs to communicate with
the asynchronous serial port on the DCE Eport-104. In this type of application the DCE Eport-104 is configured to TCP or UPD server. The socket
program running on the PC establishes a communication connection with
the DCE Eport-104. The raw data is sent directly to and from the serial
port.
The Virtual COM mode requires the installation of virtual COM
port device driver. In this mode, the DCE Eport-104 must be set to either
TCP/server or UPD/server in the menu with designed communication port
number.
SPECIFICATIONS
Serial Buffer:
Serial Connection:
LAN:
Serial Interfaces:
Data Rate:
Parity:
Data Bits:
Stop Bits:
Protocol:
The virtual COM driver is a TCP or UPD client. Once the connection is made, the LAN is transparent to the serial device. Applications
work just as if the serial device is connected a host’s physical COM port.
The virtual COM port converts the application’s data into the IP packet
back to serial data.
Paired mode is also called serial tunneling. When this type of
configuration is selected, no additional software is needed to install in a
host PC. In fact a PC is not required to make the connection. Any two
dumb serial devices that can communicate with each other through a
serial link will be able to communicate using the DCE Eport-104 and the
LAN.
Management:
Dimensions:
Power Requirements:
Operating Temperature:
Storage Temperature:
Humidity:
Approvals:
Output: 32K bytes
Input: 8K bytes per port
DTE—BD-9 male
10/100 Mbps Auto-detecting – 10 Base
T, 100 Base TX
RS-232: TX, RX, RTS, CTS, DTR, DSR,
DCD, GND
RS-422: TX+, TX-, RX+, RX-, CTS+,
CTS-, GND
RS-485: Data+, Data-, GND
110 bps to 230.4 kbps
none, even, odd, mark, space
5, 6, 7 or 8
1, 1.5 or 2
TCP, IP, APR, DHCP, Telnet, HTTP,
UDP, ICMP
Manager Software, Serial Console,
Telnet, Web server, Firmware
upgradeable
Eport-104 – 4.5 x 7.3 x 1.1
in (11.4 x 18.5 x 2.9 cm)
9 ~15 VDC 500 mA
0 to 50°C (32 to 122°F)
-20 to 60°C (-4 to 140 °F)
0—90% Non-Condensing
CE, FCC
FEATURES
Two
DCE Eport-104s are configured with one setup as a TCP or UDP client and
the other to TCP/UPD server. When setting up the Server the Remote IP
address section must contain the address of the Client. This will allow the
Client’s IP address to pass the IP address-filtering feature of the Server.
Conversely, the Remote IP address of the Client must contain the
Server’s IP address.
In the Heart Beat protocol the DCE Eport-104 provides a convenient way to establish reliable communications between two devices. Communication port 5300 is reserved for the Heartbeat Protocol. If a loss feature connection occurs the Heart Beat will try to reconnect the TCP data
connection every 5 seconds until communication is established again.
-Din Rail or panel mount.
-Supports 10/100 Mbps Ethernet.
-Supports RS-232, RS-422 and RS-485 serial interface.
-Supports LAN and WAN communications.
-In Server mode supports individual client sessions for security
-Management access password protected.
-Virtual COM drivers for Windows NT/ 98/ME /2000/XP.
-Supports socket connection in TCP server mode.
-Heart beat connection ensures reliable TCP connection against
power failure or network disruption.
- Supports loop back mode. Data is echoed back for easily testing
169
DATA CONNECT ENTERPRISE
PHONE: 301.924.7400 EXT 17
3405 OLANDWOOD CT
FAX: 301.924.7403
OLNEY, MD 20832
USA
www.data-connect.com
INDUSTRIAL SOLUTIONS
NETWORK ANYWHERE
INDUSTRIAL SERVERS & SWITCHES
ANS205
170
DCE ANS205
SPECIFICATIONS
To service the growing need for efficient, reliable data communication
in the harsh environmental of utility substation and industrial facilities,
Data Connect Enterprise has developed of five port switch that can operate from various DC voltages and survive high surge levels and extreme
heat and cold. All this without compromising the performance expected
from state-of-the-art communication devices.
The Data Connect ANS205 has 5 Ethernet Switching ports that support
10/100Base-T, with a 10/100M auto-negotiating feature and auto MDI/MDIX
function. The ANS205 can connect 5 workstation and automatically
switches and transmission speed (10Mbps or 100Mbps) for corresponding connections.
In the ANS205 the flow mechanism is also negotiated. There is link/
data rate LEDs for each port in the ANS205 to aid troubleshooting. Port
connectors are shielded RJ45.
The following are industrial applications
SCADA
Telemetry
Vehicle Detail Tracking
Utilities/Metering
Display Signs Traffic control
Many More.
The ANS205 is bundled in a 64mm X 114mm non-metallic enclosure, suitable for desktop or wall mounting.
Compatibility:
IEEE 802.3, IEEE 802.3u, IEEE802.3x
Interface:
10/100Base-T
Port:
10/100Mbps x 5 (Shielded RJ-45 Jack)
Diagnostics:
Provides LEDs for networking and power monitoring
ESD Protection:
8kV Contact Discharge
15KV Air-Gap Discharge
Cables:
10Base-T (Cat 3, 4, 5 UTP, 100m Max.)
Environmental:
Operating Temperature -30˚C to +75˚C
Storage Temperature -20˚C to +85˚C
Relative Humidity—10% to 90% non-condensing
Dimensions
64mmW x 114mmH x 107mmD
Power Requirements:
10 to 30VDC (Removable Terminal Block)
Low Power Consumption:
0.12A @ 24VDC; ± 5%, arrowed.
FEATURES
Automatic MDI/MDI-X crossover for plug-and-played
Each port supports both 10/100Mbps speed auto negotiation
Store-and-forward architecture
Full duplex IEEE 802.3x and half duplex backpressure flow
control
2.0Gps high performance memory bandwidth
Support +10 to +30 VDC voltage
Supports operating temperatures from
-30˚C to +75˚C
170
DATA CONNECT ENTERPRISE
PHONE: 301.924.7400 EXT 17
3405 OLANDWOOD CT
FAX: 301.924.7403
OLNEY, MD 20832
USA
www.data-connect.com
INDUSTRIAL SOLUTIONS
NETWORK ANYWHERE
INDUSTRIAL SERVERS & SWITCHES
ANS 208
171
DCE ANS208
SPECIFICATIONS
To service the growing need for efficient, reliable data communication in the harsh environments of utility substations and industrial
facilities, Data Connect Enterprise has developed a five port switch
that can operate heat and cold. All this without compromising the
performance expected from state-of-the-art communication devices.
The Data Connect ANS208 has 8 Ethernet Switching ports that support 10/100Base-T, with a 10/100M auto-negotiation feature and auto
MDI/MDIX function. The ANS208 can connect 8 work stations automatically switches speed (10Mbps or 200Mbps) for corresponding
connections.
In the ANS 205 flow control mechanism is also negotiated. There is
link/data rate LEDs for each port in the ANS208 to aid troubleshooting.
Port Connectors are shielded RJ45.
The following are industrial application
SCADA
Telemetry
Vehicle Detail Tracking
Utility / Metering
Display Signs
Traffic Control
Many More
Compatibility:
IEEE 802.3, IEEE 802.3u, & IEEE 802.3x
Interface:
10/100Base-T
Port:
10/100Mbps x 8 (Shield RJ-45 Jack)
Diagnostic:
Provides LEDs for networking and power monitoring
ESD Protection:
8KV Contact discharge
18KV Air-Gap Discharge
Cables:
10Base-T (Cat 3, 4, 8 UTP, 100m Max)
Environment:
Operating Temperature -30˚C to +75˚C
Storage Temperature -20˚C to +85˚C
Relative Humidity—10% to 90% non-condensing
Dimensions:
64mmW x 114mmH x 107mmD
Power Requirements:
10 to 30 VDC (Removable Terminal Block)
Low Power Consumption:
0.12A @ 24VDC; ± 8%, arrowed
FEATURES
The ANS208 is bundled in a 64mm x 114mm non-metallic enclosure, suitable for desktop or wall mounting.
Automatic MDI/MDI-X crossover for plug-and-play
Each port Supports both 10/100Mbps speed auto negotiation
Store-and-forward architecture
Full duplex IEEE 802.3x and half duplex
Backpressure flow control
2.0Gps high performance memory bandwidth
171
DATA CONNECT ENTERPRISE
PHONE: 301.924.7400 EXT 17
3405 OLANDWOOD CT
FAX: 301.924.7403
OLNEY, MD 20832
USA
www.data-connect.com
CATALOG INDEX
MODEL
1442E-003-2
DESCRIPTION
PAGE
MODEL
DESCRIPTION
PAGE
172
14.4Kbps Dial Modem
101
FIBER-E3
E3 Fiber Modem Extension
1442E-103-2
14.4Kbps Dial, Leased Line Modem
115
FIBER-T3
T3 Fiber Modem Extension
64
1442E-203-2
14.4Kbps Dial, Leased Line Modem
114
FIBER-TEL
Telephone Fiber Extension Mode
60
117
FIBER-TEL/
Dual Telephone Fiber Modem Extension
60
116
FIBER-TEL/FAX Fax Fiber Modem Extension
1442E-503-2
1442R-003-4
14.4Kbps Dial, Leased Line Modem
202TE-037-4
14.4Kbps Rackmount Dial, LL Modem
1.2Kbps Leased Line Modem
202TR-037-4
1.2Kbps Rackmount Leased Line Modem
2178CEE
Coax Ethernet Extender
2178EE
Copper Ethernet Extender
2178FEE
Fiber Ethernet Extender
2178HEE
Hardened Ethernet Extender
2178HPWEE
High Power Wireless Ethernet Extender
136, 147
137
15
6
16
7
19
64
60
HS-SFM
High Speed Serial Fiber Modem
165
IG144
Industrial Grade 14.4Kbps Dial Modem
102
IG144S
Industrial 14.4Kbps Security Dial Modem
IG192HFP
Industrial 19.2Kbps Hyper FP Modem
103
IG202T
Industrial 1.2Kbps Leased Line Modem
130, 141
IG202T-R38
Industrial 1.2Kbps Multi-protocol Modem
131, 142
IG336
Industrial Grade 33.6Kbps Dial Modem
85
97, 159
2178HSEE
High Speed Ethernet Extender
12
IG336S
Industrial 33.6Kbps Security Dial Modem
83
2178LRE2/4/8
Long Reach Ethernet Extender
11
IG56
Industrial Grade 56Kbps Dial Modem
75
2178MDEE
Multi-drop Ethernet Extender
8
IG56S
Industrial 56Kbps Security Dial Modem
2178MPEE
Multi-point Ethernet Extender
10
IG96HFP
Industrial 9.6Kbps Hyper FP Modem
2178WEE
Wireless Ethernet Extender
17
IGV.23
Industrial 1.2Kbps Leased Line Modem
2400E-000-2
2.4Kbps Dial Modem
119
IM56
Industrial 56Kbps Dial Modem
77
IML56
Industrial 56Kbps Leased Line Modem
78
2400E-034-2
2.4Kbps Dial, Leased Line Modem
2.4Kbps Quick Connect Dial Modem
121
120
MD14.4
14.4Kbps Rackmount Dial Modem
2400E-330-4
2.4Kbps Dial, Leased Line Modem
122
MD14.4L
56Kbps Rackmount Leased Line Modem
3342E-004-2
33.6Kbps Dial, Leased Line Modem
33.6Kbps Dial, Leased Line Modem
86
MD2.4
14.4Kbps Rackmount Dial Modem
88
MD202T
1.2Kbps Rackmount Leased Line Modem
2400E-030-4
3342E-208-4
129, 140
106
111, 156
125
133, 144
3342LP
33.6Kbps Dial, LL Low Profile Modem
MD28.8
28.8Kbps Rackmount Dial Modem
3342LP+
33.6Kbps Security Dial Low Profile Modem
82
MD9.6FPD
9.6Kbps Fast Poll Rackmount Modem
151
3342R-004-2
33.6Kbps Rackmount Dial, LL Modem
87
MDR
Rackmount Modem Chassis 18 MD slots
107
48V-POEI
48V Power over Ethernet Injector
50
MIU14.4
Industrial 14.4Kbps Dial Modem
54
MIU14.4L
Industrial 14.4Kbps Leased Line Modem
48V-POEI-12PH 48V Power over Ethernet 12-Port Hub
84, 161
76
98, 148
48V-POEI-GB
48V Power over Ethernet GB Injector
51
MIU2.4
Industrial 2.4Kbps Dial Modem
48V-POF-GB
48V Power over Fiber GB Injector
55
MIU202T
Industrial 1.2Kbps Leased Line Modem
5201A-BM
1-Port ADSL2+ Bridge Modem
38
MIU28.8
Industrial 28.8Kbps Leased Line Modem
5201A-MR
1-Port ADSL2+ Modem Router
39
MIU9.6FPD
Industrial 9.6Kbps Fast Poll Modem
93
104
109, 154
123
132, 143
91
150
5201V-BM
1-Port VDSL2 Bridge Modem
24
MIUPP14.4
14.4Kbps Dial Power thru Serial Interface
5204A-GRD
4-Port ADSL2+ Wireless G Router
40
MIUPP14.4L
14.4Kbps LL Power thru Serial Interface
110, 155
5204V-BM
4-Port VDSL2 Bridge Modem
27
MIUPP2.4
2.4Kbps Dial Power thru Serial Interface
124
5204V-MR
4-Port VDSL2 Modem Router
28
MIUPP28.8
28.8Kbps Dial Power thru Serial Interface
92
5204V-NRD
4-Port VDSL2 Wireless N Router
30
MM56
56Kbps OEM PCB Dial Modem
79
5208V-SMS
8-Port VDSL2 CO Switch, 2GB ports
32
PE14.4
14.4Kbps OEM PCB Dial Modem
108
5224A-DSG
24-Port ADSL DSLAM Wireless G
44
PE14.4L
14.4Kbps OEM PCB Leased Line Modem
113
5224V-DSGSFP 24-Port ADSL2+ DSLAM with Fiber
35
PE2.4
2.4Kbps OEM PCB Dial Modem
5248A-DSG
42
PE202T
1.2Kbps OEM PCB Leased Line Modem
48-Port ADSL2+ DSLAM Wireless G
5248V-DSGSFP 48-Port VDSL DSLAM 1-Fiber Port
35
PE28.8
28.8bps OEM PCB Dial Modem
60V-POES
56
PE9.6FPD
9.6Kbps OEM PCB Fast Poll Modem
60V POE Surge Suppressor
105
127
135, 146
95
153
ANS205CR
Industrial 5-Port Switch
170
QUADFIBER-E 4-E1s over Fiber
63
ANS208
Industrial 8-Port Switch
171
QUADFIBER-T 4-T1s over Fiber
63
ATA-1000
Analog Telephone Adapter
52
RM16UI-FIBER Fiber Rackmount Chassis 16 Slots
65
COPPER-T
T1 Copper Modem Extender
61
RM20UI-FIBER Fiber Rackmount Chassis 20 Slots
65
D4
Channel Bank
DSL-FILTER
ADSL2+ Filter
DSL-SPLITTER ADSL2+ Splitter
DSP9612
9.6Kbps Fast Poll Modem
70
RM24UI-FIBER Fiber Rackmount Chassis 24 Slots
46
SFM
47
99, 149
164
SHS-SFM
Super High Speed Fiber Modem
165
SWM910A
Serial Wireless Modem Frequency Hop.
165
81, 162
84, 161
EPORT-101
Ethernet Serial Server
168
V.3600UI
EPORT-102
Ethernet Serial Server
168
V3600LP
33.6Kbps Dial, Leased Line LCD Modem
33.6Kbps Dial, LL Low Profile Modem
EPORT-104
Ethernet Serial Server
169
V3600LP+
33.6Kbps Security Dial Low Profile Modem
FIBER -T
T-1 Fiber Modem Extension
172
62
65
Serial Fiber Modem
82
173
INDUSTRY & APPLICIATION
Distributors & Consultants
MDU/PDU
Michael Spellerberg 301-924-7400×25
mspellerberg@data-connect.com
Neal Cennamo 973-442-9990
nac@idpc.com
Integrators, VARs & Resellers
LAN/Network/Demark Extension
Bill Patton 610-399-3911
bill.patton@data-connect.com
Daniel Rowe 301-924-7400×17
drowe@data-connect.com
Carrier, CLEC, ILEC, ISP
Retail/POS Cisco
Al Dipasquale 973-442-9990
alfredo@idpc.com
John Shaw 973-442-9990
jcs@idpc.com
International Channel Partners
Federal/State Government & Government Contractors
Barry Patton 301-924-7400×12
bpatton@data-connect.com
Lou Costa 301-924-7400×21
lcosta@data-connet.com
Utility & SCADA
Wayne Ware 800-926-0226
wayne@arcelect.com
Small-Medium Business (SMB)
Steve Heatter 973-442-9990
steve@idpc.com
TECHNOLOGY SPECIALISTS:
ADSL/VDSL/DSLAM
Telephony, VOIP
Al Dipasquale 973-442-9990
alfredo@idpc.com
Steve Heatter 973-442-9990
steve@idpc.com
Copper, Ethernet, PoE, Camera
Extension
Hosted VOIP, IP Phones
Neal Cennamo 973-442-9990
nac@idpc.com
Bill Patton 610-399-3911
bill.patton@data-connect.com
Cisco Centric Networks
Fiber Extension, PoF, Channel
Banks
John Shaw 973-442-9990
jcs@idpc.com
Wayne Ware 800-926-0226
wayne@arcelect.com
Adtran Centric Networks
Wireless LAN Extension
Lou Costa 301-924-7400×21
lcosta@data-connect.com
Michael Spellerberg 301-924-7400×25
mspellerberg@data-connect.com
Legacy Transmission
Wireless WAN Extension
Barry Patton 301-924-7400×12
bpatton@data-connect.com
Daniel Rowe 301-924-7400×17
drowe@data-connect.com
TECHNICAL SUPPORT:
Michael Spellerberg 301.924.7400 x25
Steve Heater 973-442-9990
mspellerberg@data-connect.com
Copper, Ethernet, PoE, Camera Extension
Fiber Extension, PoF, Channel Banks
Wireless LAN & WAN Extension
Adtran Centric Networks
Legacy Transmission
steve@idpc.com
ADSL/VDSL/DSLAM
Telephony, VOIP
Hosted VOIP, IP Phones
CISCO Centric Networks
173
174
Data Connect Enterprise, Inc
World Headquarters
3405 Olandwood Court
Olney, Maryland 20832
USA
888-4-WAN-LAN
(888-492-6526)
301-924-7400
NORTH AMERICA SERVICE/SALES/WAREHOUSE LOCATIONS:
Washington, DC 301-924-7400×17
West Chester, PA 610-399-3911
Wharton, NJ 973-442-9990
Georgetown, TX 800-926-0226
Irvine, CA 888-492-6526
INTERNATIONAL SALES & SERVICE CONTACTS:
Latin America
mspellerberg@data-connect.com (Spanish & English)
rcarranza@data-connect.com (Spanish & English)
Asia Pacific
annagao@data-connect.com (Mandarin & English)
Middle East & North Africa (MENA)
bpatton@data-connect.com
Central & Western Europe
drowe@data-connect.com
France, Belgium, Monaco, Luxembourg
bill.patton@data-connect.com (French & English)
ORDER DCE PRODUCTS ON-LINE:
www.ClickITDirect.com
www.DSL-Warehouse.com
DCE AFFILIATE WEBSITES:
174
Data Connect Enterprise
DCE Express
Information Data Products
ARC Electronics
Voip-Networking.com
Data Communications Experts
Wireless Network Supply
Data Connect US
175
175
176
176
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising