Controller - PSE
Controller
SV-204
SV-306
SV-408
>>>> 2
In - 4 out
>>>> 3
In - 6 out
>>>>
inside
4 In - 8 out
technical specification
key features
• 96kHz sampling ratio
• 32 bit processing
• 24 bit A/D and D/A converter
• network compatible RS 485
• up to 250 controller in one network
• delay time adjustable up to 1000ms
• 30 internal presets
• unlimited preset library on PC
• advanced and convinient PC software
• self-explaining simple menu guidance
• password look function available
• network socket 2 x RJ-45 (rear panel)
• USB socket (front panel)
• optional WIFI converter WT-1 available
• optional RS 485 converter IF-485 available
saple rate
processing
input impedance (balanced)
input impedance (balanced)
CMRR (common mode rejection)
max. Input level
frequency response
S/N R
THD
crosstalk
AC-Voltage *switchable
max. power consumption
dimesion (w/h/d)
weight
96kHz
32bit
20kΩ
100Ω
>80dB
+25dBU
20Hz to 20kHz
≥100 dB(1kHz/0dB signal level)
˂0.002% (1kHz/0dB signal level)
>89dB
110V*/230V (50/60Hz)
25W
19" / 1RU / 263mm
4.5kg
output functions
output mute *each channel separately
output gain -80dB to +12dB in 0,2 dB steps
output delay adjustable from 0 -1000ms
0 to 10ms in 21 μs steps / 10ms to 20ms in 84μs / 20ms to 1000ms in 0.5ms
output polarity switchable ±
input functions
output EQ
Input mute *each channel separately
Input gain -80dB to +12dB in 0,2 dB steps
Input delay adjustable from 0 -1000ms
6 adjustable full parametric EQ available at each output channel
the filter characteristic of each filter can be selected
as Low-shelf, High-shelf or PEQ parametric EQ
0 to 10ms in 21 μs steps / 10ms to 20ms in 84μs / 20ms to 1000ms in 0.5ms
Input polarity switchable ±
Input EQ
6 adjustable full parametric EQ available at each input channel
filter frequency adjustable from 20Hz to 20kHz
bandwidth adjustable from 0.05 oct. to 3oct.
gain adjustable from -20dB to +20dB in 0.1dB steps
PEQ filter frequency adjustable from 20Hz to 20kHz
PEQ bandwidth adjustable from 0.05oct. to 3oct.
PEQ gain adjustable from -20dB to +20dB in 0.1dB steps
Low-shelf and High-shelf slew rate switchable 6dB/oct or 12dB/oct
Low-shelf and High-shelf filter frequency adjustable from 20Hz to 20kHz
Low-shelf and High-shelf gain adjustable from -20db to +20dB
Input expander
output compressor threshold -40dBU to +20dBU in 0.5 dB steps
compression ratio adjustable from 1:1 to 20:1
in 0.1 steps from 1:1 to 2:1 in 0.5 steps from 2:1 to 20:1
response time adjustable from 0.3ms to 200ms
in 0.1ms steps from 0.3ms to 1ms in 1ms steps from 1ms to 200ms
release time adjustable from 50ms to 5000ms in 1ms steps
output limiter threshold -40dBU to +20dBU in 0.5 dB steps
attack time adjustable from 0.3ms to 200ms in 0.1ms steps
in 0.1ms steps from 0.3ms to 1ms in 1ms steps from 1ms to 200ms
release time adjustable from 50ms to 5000ms in 1ms steps
threshold -40dBU to +20dBU in 0.5 dB steps
expantion ratio adjustable from 1:1 to 1:20
in 0.1 steps from 1:1 to 1:2 in 0.5 steps from 1:2 to 1:20
response time adjustable from 0.3ms to 200ms
in 0.1ms steps from 0.3ms to 1ms in 1ms steps from 1ms to 200ms
release time adjustable from 50ms to 5000ms in 1ms steps
LPF and HPF can be set into each output channel
selectable filter types: Linkwitz-Riley, Bessel, Butterworth
filter frequency can be set between 20Hz and 20kHz
available slew rates: 12dB/oct. 18dB/oct. 24dB/oct. 30dB/oct.
36dB/oct. 42dB/oct. 48dB/oct.
Input compressor
threshold -40dBU to +20dBU in 0.5 dB steps
compression ratio adjustable from 1:1 to 20:1
in 0.1 steps from 1:1 to 2:1 in 0.5 steps from 2:1 to 20:1
response time adjustable from 0.3ms to 200ms
in 0.1ms steps from 0.3ms to 1ms in 1ms steps from 1ms to 200ms
release time adjustable from 50ms to 5000ms in 1ms steps
SV_series DM_EN_150101
crossover
www.pse-audio.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising