Harris Corporation :: Broadcast Communications / X50

Harris Corporation :: Broadcast Communications / X50
X50™
Frame Synchronizer and Converter
Harris continues to set the standard for innovative, top-performing processors with the
introduction of the X50™ frame synchronizer and converter. This best-in-class,
single-channel platform delivers the exceptional quality and functionality that have come
to define the popular and award-winning Harris series of 1RU processors, which also
includes the X85™ and X75™.
The X50 is compact and cost-effective, yet feature-rich, offering an array of analog and
digital baseband video and audio processing capabilities. This 1RU frame sync/converter
effectively and reliably supports standard-definition and high-definition formats, as well as
optional 3 Gb/s 1080p Level A and Level B processing, for hybrid television and
production systems. With easy-to-use controls, the X50 comes standard with a myriad of
features, including color correction, closed caption/teletext capabilities, control and
monitoring via a built-in Web server, Active Format Description (AFD) support, two fully
controllable Aspect Ratio Converters and 16-channel embedded audio processing.
Available options include a fiber input and output plug-in.
The powerful, affordable and energy-efficient X50 processor can easily be incorporated
into the workflow of any broadcast environment — from small stations and OB vans to
production studios and networks.
Coming soon ─ New Feature Release for Production Applications!
The frame sync, proc amp and color correction capability for all 1080p/psf formats (23.98,
24, 25, 29.97, 30) will soon be available as a free code update. Included in this new
release is a basic frame rate converter that can be used either for graphics, or as a
low-cost backup for linear or motion-compensated frame rate conversion in a critical path.
"We'd been very satisfied users of the Harris line of 1RU processors for some time, and had
been waiting for them to introduce a cost-effective, standard version. Just as we were
planning the design of our latest truck, we were pleased to see the launch of the X50, which
offers absolutely everything — including optional 3 Gb/s — at an unbeatable price point."
Jim McGillion
X50
1
www.broadcast.harris.com
President
Metrovision
•
•
•
•
•
FEATURES
▪ Frame sync/delay, proc amp, noise reduction, clipping, color correction
▪ 3DTV capable
▪ Advanced motion detection for up/down/cross/aspect ratio conversion
▪ Two switchable auto-sensing 3D/HD/SD inputs
▪ Up/down/cross/aspect ratio conversion with two simultaneous, independent output formats
▪ Two aspect ratio converters with full control over H/V size and position
▪ Audio de-embed/embed, sync, gain, invert, delay with 16 channels (four groups) processing
◦ PCM and non-PCM (Dolby® Digital, Dolby® E) passthrough
▪ Video Interfaces:
◦ Analog composite
◦ Analog component
▪ YPrPb input and output (HD and SD)
▪ RGB output
◦ Auto-sensing SDI for .27/1.5 Gb/s, 3 Gb/s optional
◦ EDH/CRC error monitoring and insertion
◦ HDMI output for video and audio
▪ Audio Interfaces:
◦ Eight-channel analog audio
◦ Four groups embedded audio
◦ Four AES (75 ohms) inputs
▪ Data and Metadata:
◦ CC (CEA608/708) and Teletext (OP47)
◦ Audio metadata VANC embed/de-embed, generator, serial input/output
◦ AFD/Wide Screen Signaling (WSS)/VI
▪ Control and Monitoring:
◦ 100/100 Ethernet connectivity
◦ SNMP
◦ Built-in Web server
◦ Local control panel
▪ CCS Navigator™-compliant for use with:
◦ X85/X75 control panels
X50
2
www.broadcast.harris.com
◦ NUCLEUS™ network control panels
◦ CCS Navigator software
◦ Four GPI inputs and outputs
▪ Optional fiber input and output
▪ Optional 3 Gb/s
▪ Built-in video test and audio tone generators
▪ Redundant power supply
▪ Free future code update for logo generator/inserter and I-Wings side bar insertion, as well as SD memory card for p
graphics storage, firmware updates
X50
3
www.broadcast.harris.com
IMAGES/DIAGRAMS
Audio Block Diagram - Click on the image for high res.
Video Block Diagram - Click on the image for high res.
Back View
SPECIFICATIONS
X50
4
www.broadcast.harris.com
Specifications and designs are subject to change without notice.
VIDEO INPUTS
3 Gb/s/HD/SD-SDI
Number of Inputs
2
Standard
3 Gb/s: SMPTE 424M (2.97, 2.97/1.001 Gb/s) Level A, SMPTE 372M Level B for
YCrCb, 4:2:2, 10-bit with 16-channels of embedded audio
HD: SMPTE 292M (1.485, 1.485/1.001 Gb/s)
SD: SMPTE 259M-C (270 Mb/s, 525/625 component video)
Connector
BNC (IEC 169-8)
Impedance
75 ohms
Return Loss
>10 dB, typical, from 5 to 2970 MHz
>15 dB, typical, from 5 to 1485 MHz
>15 dB, typical, from 5 to 270 MHz
Equalization
3 Gb/s: adaptive cable equalization for up to 164 ft (50 m), typical, of Belden 1694A
coaxial cable
HD: adaptive cable equalization for up to 492 ft (150 m), typical, of Belden 1694A
coaxial cable
SD: >23 dB Belden 8281 coaxial cable
Fiber Input Specifications (OP+SFP+TR13P Module)
Item
Minimum
Typical
Maximum
Note*
Number of LC connector
-
-
1
Input wavelength
1260 nm
-
1620 nm
Optical power monitor
-2 dB
0
2 dB
-
-22 dBm
-20 dBm
Pathological
-
-22 dBm
-19 dBm
Pathological
-
-19 dBm
-18 dBm
Pathological
0 dBm
-
-
BER = 1E-12 against SDI matrix
inputs
accuracy
Sensitivity at 270 Mb/s
(SMPTE 259M)
Sensitivity at 1.5 Gb/s
(SMPTE 292M)
Sensitivity at 3 Gb/s
(SMPTE 424M)
Overload
check field signals for video
applications. BER = 1E-12 against
PRBS 223-1 for datacom
applications.
S-Video
X50
Standard
NTSC, PAL-B, PAL-M
Connector
4-pin DIN
5
www.broadcast.harris.com
Analog Composite
Standard
NTSC (SMPTE 170M), PAL-B (ITU 624-2), PAL-M, PAL-I
Connector
BNC (IEC 169-8)
Input Level
1.0 V pk-pk
Impedance
75 ohms
Return Loss
>40 dB, 0.1 MHz to 6 MHz
Common Mode Range
5.0 V
CMRR
60 dB @ 50/60 Hz, 5 V pk-pk
Component
Format
Betacam/SMPTE
Connector
BNC (IEC 169-8)
Input Level
1.0 V pk-pk
Impedance
75 ohms
Return Loss
>40 dB, 1 kHz to 6 MHz
Genlock
Connector
BNC (IEC 169-8)
Impedance
75 ohms
Return Loss
>40 dB (typical) to 6 MHz
>35 dB (typical) to 30 MHz
Common Mode Range
5.5 V pk-pk
CMRR
60 dB @ 60Hz, 5 V pk-pk
Input Level
1 V pk-pk
-5.0 to +6.0 dB for NTSC/PAL-B ±300 mV
-3.5 to +6.0 dB for tri-level sync:
1080i: 59.94/50
1080p: 29.97/25
Signal Type
NTSC/PAL-B analog composite ±300 mV tri-level sync
Standard
SMPTE 170M (NTSC)
ITU-R BT.470-6 (PAL-B)
SMPTE 274M (1080i, 1080p)
VIDEO OUTPUTS
3 Gb/s/HD/SD-SDI
Number of Outputs
2
Standard
3 Gb/s: SMPTE 424M (2.97, 2.97/1.001 Gb/s)
HD: SMPTE 292M, SMPTE (1.485, 1.485/1.001 Gb/s)
X50
6
www.broadcast.harris.com
SD: SMPTE 259M-C (270 Mb/s, 525/625 component video)
Connector
BNC (IEC 169-8)
Impedance
75 ohms
Return Loss
>10 dB, typical, from 5 to 2970 MHz
>15 dB, typical, from 5 to 1485 MHz
>20 dB, typical, from 5 to 270 MHz
Signal Level
800 mV ±10%
DC Offset
0.0 ±0.5 V
Rise and Fall Time
3 Gb/s: <135 ps (20% to 80%)
HD: <270 ps (20% to 80%)
SD: 400 to 1500 ps (20% to 80%)
Overshoot
<10% of amplitude (all outputs terminated)
Jitter
Timing:
3 Gb/s: <2 UI pk-pk
HD: <1 UI pk-pk
SD: <0.2 UI pk-pk
Alignment:
3 Gb/s: <0.3 UI pk-pk
HD: <0.2 UI pk-pk
SD: <0.2 UI pk-pk
Fiber Output Specifications (OP+SFP+TR13P Module)
Item
Minimum
Typical
Maximum
Number of LC connector
-
-
1
Note*
outputs
Standards
3 Gb/s: SMPTE
424M
HD: SMPTE
292M
SD: SMPTE
259M"
Peak wavelength
1280 nm
1310 nm
1340 nm
Spectrum width (RMS)
-
1.5 nm
3 nm
Average output power
-7 dBm
-
0 dBm
Optical rise/fall time (3G
-
105/120 ps
165/180 ps
Extinction ratio
5 dB
7 dB
-
Jitter
-
<110 ps
180 ps
-
<60 ps
100 ps
1.5 Gb/s SDI
Measured at 25° C
HD-SDI)
SD-SDI Pathological
Pathological
X50
<45 ps
70 ps
3 Gb/s HD-SDI
7
www.broadcast.harris.com
Pathological
Laser safety level
Class 1
HDMI
Number of Outputs
1
Standards
525, 625, 1080i/59.94, 1080i/50, 1080p/23.98, 720p/59.94, 720p/50
Connector
HDMI
Compliance
HDMI 1.3
S-Video
Standard
NTSC, PAL-B, PAL-M
Connector
4-pin DIN
Composite
Standard
NTSC, PAL-B, PAL-M, PAL-I
Connector
BNC (IEC 169-8)
Quantization
12-bits
Impedance
75 ohms
Return Loss
>40 dB, 0.1 to 6 MHz
Frequency Response
-1.6 dB at 6 MHz
DC Offset
<0.5 mV
Differential Gain
<0.5%
Differential Phase
<0.5°
Y/C Delay
<10 ns (NTSC)
<23.1 ns (PAL)
Y/C Gain
<1%, typical
Transient Response
<0.5% K Factor
SNR
>63 dB, 0.1 MHz to 6 MHz
Component
Format
Betacam/SMPTE/RGB
Connector
BNC (IEC 169-8)
Quantization
12-bits
Impedance
75 ohms
Return Loss
>40 dB, 1 kHz to 6 MHz
Frequency Response
Y: ±0.5 dB to 5.5 MHz
Pb/Pr: -3.27 dB to 3.0 MHz
X50
DC Offset
<0.0 ±5 mV
Relative Delay
<±10 ns
8
www.broadcast.harris.com
SNR
>63 dB, typical, luma ramp
AUDIO INPUTS
AES/DARS
Number of Inputs
4 x AES, 1 x DARS
Standard
AES3, SMPTE 276M
Type
Unbalanced, AC coupled
Connector
1.0/2.3 DIN
Sensitivity
<100 mV
Impedance
75 ohms
Return Loss
>25 dB, 0.1 MHz to 6 MHz
Input Audio Rate
16 to 96 kHz
Channel Status and User Bit Maintained, but professional mode, 48 kHz
Analog
Number of Inputs
8 mono channels
Type
Balanced
Connector
DB-25, Tascam-style cable snake for balanced 8-channel audio
Input Audio Level
28 dBu to 12 dBu (adjustable in .5 dB increments)
Input Impedance
High-impedance or 600 ohms, jumper selectable
CMRR
>80 dB @ 60 Hz, typical
AUDIO OUTPUTS
AES
X50
Number of Outputs
4
Standard
AES3, SMPTE 276M
Type
Unbalanced, AC coupled
Connector
1.0/2.3 DIN
Signal Level
1.0 V ±10% (pk-pk)
Impedance
75 ohms
Return Loss
>25 dB, 0.1 MHz to 6 MHz
Jitter
<20 ns
DC Offset
0.0 ±50 mV
Rise and Fall Time
30 ns to 44 ns (10% to 90%)
Audio Rate
48 kHz
9
www.broadcast.harris.com
Bits
24, 20 or 16
Channel Status and User Bit Maintained, but professional mode, 48 kHz
Analog
Number of Inputs
8 mono channels
Type
Balanced
Connector
DB-25, Tascam-style cable snake for balanced 8-channel audio
Output Audio Level
28 dBu to 16 dBu (adjustable in 2 dB increments)
Output Impedance
66 ohms
Frequency Response
0.15 dB, 20 Hz to 20 kHz
THD
≥80 dB, 20 Hz 20 kHz
SNR
>100 dB typical
Crosstalk
>90 dB, 20 Hz to 20 kHz, typical
Linearity
<1.0 dB (-80 dBu to +20 dBu), typical
CONNECTORS AND I/O
GPI (General Purpose Interface)
Connector
DB-9
Number of Inputs
4
Number of Outputs
4
RS-422
Standard
RS-422
Connector
DB-9
LAN
Connector
RJ-45
Type
10/100Base-T Ethernet
Weight and Dimension Measurements
X50
Weight
3.83 kg (8.45 lbs) (excluding rack and cable supports)
Height
1.72 in. (4.37 cm)
Width
17.47 in. (44.4 cm); 17.60 in. (44.7 cm) with rear supports (excluding mounting ears)
Depth
21.25 in. (54.0 cm) (including front controls and rear BNC connectors)
Power Consumption
100-240 VAC, 47-63 Hz, 75 W
Electrical Requirements
100-240 VAC at 47 to 63 Hz, 3 Amps max
10
www.broadcast.harris.com
Temperature
Ambient temperature of 41º to 95º F (5º to 35º C) with a relative humidity of 10-90%
(non condensing).
ORDERING INFORMATION
X50-AV-2PS
1RU frame sync, converter and processor with audio processing and dual power supplies.
For 3 Gb/s capability, the X50OPT-3G software key is required. AES/DARS connections
require X50OPTCAB-AES adaptor cables. For fiber connectivity, the OP+SFP+TR13P
transceiver is required
X50OPT-3G
3.0 Gb/s input and output option for X50
X50OPTCAB-AES
AES interface cable - BNC to 1.0/2.3 DIN for X50
OP+SFP+TR13P
Small form factor for Harris fiber optic products. 1310 nm wavelength transceiver with
pathological support for baseband video
OP+SFP+TR27P
Small form factor for Harris fiber optic products. 1270 nm wavelength transceiver with
pathological support for baseband video (preliminary)
OP+SFP+TR29P
Small form factor for Harris fiber optic products. 1290 nm wavelength transceiver with
pathological support for baseband video (preliminary)
OP+SFP+TR31P
Small form factor for Harris fiber optic products. 1310 nm wavelength transceiver with
pathological support for baseband video (preliminary)
OP+SFP+TR33P
Small form factor for Harris fiber optic products. 1330 nm wavelength transceiver with
pathological support for baseband video (preliminary)
OP+SFP+TR35P
Small form factor for Harris fiber optic products. 1350 nm wavelength transceiver with
pathological support for baseband video (preliminary)
OP+SFP+TR37P
Small form factor for Harris fiber optic products. 1370 nm wavelength transceiver with
pathological support for baseband video (preliminary)
OP+SFP+TR43P
Small form factor for Harris fiber optic products. 1430 nm wavelength transceiver with
pathological support for baseband video (preliminary)
OP+SFP+TR45P
Small form factor for Harris fiber optic products. 1450 nm wavelength transceiver with
pathological support for baseband video (preliminary)
OP+SFP+TR47P
Small form factor for Harris fiber optic products. 1470 nm wavelength transceiver with
pathological support for baseband video (preliminary)
OP+SFP+TR49P
Small form factor for Harris fiber optic products. 1490 nm wavelength transceiver with
pathological support for baseband video (preliminary)
OP+SFP+TR51P
X50
Small form factor for Harris fiber optic products. 1510 nm wavelength transceiver with
11
www.broadcast.harris.com
pathological support for baseband video (preliminary)
OP+SFP+TR53P
Small form factor for Harris fiber optic products. 1530 nm wavelength transceiver with
pathological support for baseband video (preliminary)
OP+SFP+TR55P
Small form factor for Harris fiber optic products. 1550 nm wavelength transceiver with
pathological support for baseband video (preliminary)
OP+SFP+TR57P
Small form factor for Harris fiber optic products. 1570 nm wavelength transceiver with
pathological support for baseband video (preliminary)
OP+SFP+TR59P
Small form factor for Harris fiber optic products. 1590 nm wavelength transceiver with
pathological support for baseband video (preliminary)
OP+SFP+TR61P
Small form factor for Harris fiber optic products. 1610 nm wavelength transceiver with
pathological support for baseband video (preliminary)
X50
12
www.broadcast.harris.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising