PC4937/PC5937 Audio Expansion Module Installation

PC4937/PC5937 Audio Expansion Module Installation
1. On the front of the Maxsys PC4936 or Power Series PC5936 board, press the three
plastic standoffs into the three holes where the PC4937/PC5937 is to be connected.
2. Align CON1 on the PC4937/PC5937 with CON1 on the Maxsys PC4936 or Power
Series PC5936 board.
3. Press the pins on the back of the PC4937/PC5937 into CON1 on the PC5936.
PC4937/PC5937 Audio Expansion Module
Installation Instructions
4. Press the PC4937/PC5937 onto the three plastic standoffs on the Maxsys PC4936
or Power Series PC5936 board.
5. Connect up to 8 audio stations to the PC4937/PC5937 terminals, as described in
the PC5936 Installation Manual.
6. Once all wiring is complete, apply power to the control panel. Connect the battery
leads to the battery, then connect the AC transformer. For more information on
control panel power specifications, see the control panel Installation Manual.
NOTE: Do not connect the power until all wiring is complete.
5.
Programming the Audio Interface Module
See your Maxsys PC4936 or Power Series PC5936 Installation Manual for complete
programming instructions for the module and the audio ports.
Limited Warranty
Digital Security Controls Ltd. warrants that for a period of twelve months from the date of purchase, the product shall be
free of defects in materials and workmanship under normal use and that in fulfilment of any breach of such warranty,
Digital Security Controls Ltd. shall, at its option, repair or replace the defective equipment upon return of the equipment
to its factory. This warranty applies only to defects in parts and workmanship and not to damage incurred in shipping or
handling, or damage due to causes beyond the control of Digital Security Controls Ltd. such as lightning, excessive
voltage, mechanical shock, water damage, or damage arising out of abuse, alteration or improper application of the
equipment.
The foregoing warranty shall apply only to the original buyer, and is and shall be in lieu of any and all other warranties, whether
expressed or implied and of all other obligations or liabilities on the part of Digital Security Controls Ltd. This warranty contains
the entire warranty. Digital Security Controls Ltd. neither assumes responsibility for, nor authorizes any other person purporting
to act on its behalf to modify or to change this warranty, nor to assume for it any other warranty or liability concerning this product.
In no event shall Digital Security Controls Ltd. be liable for any direct or indirect or consequential damages, loss of anticipated
profits, loss of time or any other losses incurred by the buyer in connection with the purchase, installation or operation or
failure of this product.
Warning:: Digital Security Controls Ltd. recommends that the entire system be completely tested on a regular basis.
However, despite frequent testing, and due to, but not limited to, criminal tampering or electrical disruption, it is possible
for this product to fail to perform as expected.
FCC COMPLIANCE STATEMENT
1.
2.
Specifications
• Current draw: 5 mA
• Connect up to 8 audio stations (interior or exterior)
• Total current-providing capability between AUX terminals - 500 mA
• Input impedance at any microphone input - 25kΩ
• Maximum music input signal level amplitude - 200 mV peak to peak
3.
CAUTION: Changes or modifications not expressly approved by Digital Security Controls Ltd. could void your authority to use this
equipment.
This equipment generates and uses radio frequency energy and if not installed and used properly, in strict accordance with the
manufacturer’s instructions, may cause interference to radio and television reception. It has been type tested and found to comply with the
limits for Class B device in accordance with the specifications in Subpart “B” of Part 15 of FCC Rules, which are designed to provide
reasonable protection against such interference in any residential installation. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause interference to television or radio reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Re-orient the receiving antenna
• Relocate the alarm control with respect to the receiver
• Move the alarm control away from the receiver
• Connect the alarm control into a different outlet so that alarm control and receiver are on different circuits.
If necessary, the user should consult the dealer or an experienced radio/television technician for additional suggestions. The user may find the
following booklet prepared by the FCC useful: “How to Identify and Resolve Radio/Television Interference Problems”. This booklet is available
from the U.S. Government Printing Office, Washington D.C. 20402, Stock # 004-000-00345-4.
Introduction
The PC4937/PC5937 adds 8 audio ports to the Maxsys PC4936 or PowerSeries PC5936
audio interface module.
Unpacking
The PC4937/PC5937 package contains the following parts:
• One PC4937/PC5937 board
• 3 plastic standoffs
4.
Installation
Before beginning to connect the unit, ensure that all power (AC transformer and battery)
is disconnected from the control panel and from the Maxsys PC4936 or the PowerSeries
PC5936 module.
PC4937/PC5937
®
©2001 Digital Security Controls Ltd.
Toronto, Canada
.dsc.com
1-800-387-3630 (Canada & US only) • www
www.dsc.com
Printed in Canada 29005810 R001
Audio Expansion Module
WARNING: Please refer to the System Installation Manual
for information on limitations regarding product use and
function and information on the limitations as to liability of
the manufacturer.
1. On the front of the Maxsys PC4936 or Power Series PC5936 board, press the three
plastic standoffs into the three holes where the PC4937/PC5937 is to be connected.
2. Align CON1 on the PC4937/PC5937 with CON1 on the Maxsys PC4936 or Power
Series PC5936 board.
3. Press the pins on the back of the PC4937/PC5937 into CON1 on the PC5936.
PC4937/PC5937 Audio Expansion Module
Installation Instructions
4. Press the PC4937/PC5937 onto the three plastic standoffs on the Maxsys PC4936
or Power Series PC5936 board.
5. Connect up to 8 audio stations to the PC4937/PC5937 terminals, as described in
the PC5936 Installation Manual.
6. Once all wiring is complete, apply power to the control panel. Connect the battery
leads to the battery, then connect the AC transformer. For more information on
control panel power specifications, see the control panel Installation Manual.
NOTE: Do not connect the power until all wiring is complete.
5.
Programming the Audio Interface Module
See your Maxsys PC4936 or Power Series PC5936 Installation Manual for complete
programming instructions for the module and the audio ports.
Limited Warranty
Digital Security Controls Ltd. warrants that for a period of twelve months from the date of purchase, the product shall be
free of defects in materials and workmanship under normal use and that in fulfilment of any breach of such warranty,
Digital Security Controls Ltd. shall, at its option, repair or replace the defective equipment upon return of the equipment
to its factory. This warranty applies only to defects in parts and workmanship and not to damage incurred in shipping or
handling, or damage due to causes beyond the control of Digital Security Controls Ltd. such as lightning, excessive
voltage, mechanical shock, water damage, or damage arising out of abuse, alteration or improper application of the
equipment.
The foregoing warranty shall apply only to the original buyer, and is and shall be in lieu of any and all other warranties, whether
expressed or implied and of all other obligations or liabilities on the part of Digital Security Controls Ltd. This warranty contains
the entire warranty. Digital Security Controls Ltd. neither assumes responsibility for, nor authorizes any other person purporting
to act on its behalf to modify or to change this warranty, nor to assume for it any other warranty or liability concerning this product.
In no event shall Digital Security Controls Ltd. be liable for any direct or indirect or consequential damages, loss of anticipated
profits, loss of time or any other losses incurred by the buyer in connection with the purchase, installation or operation or
failure of this product.
Warning:: Digital Security Controls Ltd. recommends that the entire system be completely tested on a regular basis.
However, despite frequent testing, and due to, but not limited to, criminal tampering or electrical disruption, it is possible
for this product to fail to perform as expected.
FCC COMPLIANCE STATEMENT
1.
2.
Specifications
• Current draw: 5 mA
• Connect up to 8 audio stations (interior or exterior)
• Total current-providing capability between AUX terminals - 500 mA
• Input impedance at any microphone input - 25kΩ
• Maximum music input signal level amplitude - 200 mV peak to peak
3.
CAUTION: Changes or modifications not expressly approved by Digital Security Controls Ltd. could void your authority to use this
equipment.
This equipment generates and uses radio frequency energy and if not installed and used properly, in strict accordance with the
manufacturer’s instructions, may cause interference to radio and television reception. It has been type tested and found to comply with the
limits for Class B device in accordance with the specifications in Subpart “B” of Part 15 of FCC Rules, which are designed to provide
reasonable protection against such interference in any residential installation. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause interference to television or radio reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Re-orient the receiving antenna
• Relocate the alarm control with respect to the receiver
• Move the alarm control away from the receiver
• Connect the alarm control into a different outlet so that alarm control and receiver are on different circuits.
If necessary, the user should consult the dealer or an experienced radio/television technician for additional suggestions. The user may find the
following booklet prepared by the FCC useful: “How to Identify and Resolve Radio/Television Interference Problems”. This booklet is available
from the U.S. Government Printing Office, Washington D.C. 20402, Stock # 004-000-00345-4.
Introduction
The PC4937/PC5937 adds 8 audio ports to the Maxsys PC4936 or Power Series PC5936
audio interface module.
Unpacking
The PC4937/PC5937 package contains the following parts:
• One PC4937/PC5937 board
• 3 plastic standoffs
4.
Installation
Before beginning to connect the unit, ensure that all power (AC transformer and battery)
is disconnected from the control panel and from the Maxsys PC4936 or the Power Series
PC5936 module.
PC4937/PC5937
®
©2001 Digital Security Controls Ltd.
Toronto, Canada
.dsc.com
1-800-387-3630 (Canada & US only) • www
www.dsc.com
Printed in Canada 29005810 R001
Audio Expansion Module
WARNING: Please refer to the System Installation Manual
for information on limitations regarding product use and
function and information on the limitations as to liability of
the manufacturer.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising