WA-700 - Ude Audio
WA-700
PUBLIC ADDRESS
SYSTEM PORTABLE
Composed of:
1 Self-amplified acoustic with waistband.
1 Headset microphone.
1 AC / DC adaptor for charge the LI battery.
1 Heavy-duty carrybag.
WA-700
DESCPRIPTION
WA-700 is a rugged waistband PA amplifier
manufactured in a durable housing for the
applications of any public vocal sound
amplification and it is possible move yourself
freely.
It allows making yourself heard clearly in a
reasonably wide area surrounded you, with no
need to force your voice.
It incorporates a rechargeable Lithium battery,
an efficient neodymium magnet 3", with SMD
components & circuits.
OPERATION
1. Unpack the waistband PA amplifier and accessories.
2. Set the belt as the pictures then adjust it to suitable length.
3. Connect the supplied headset microphone to the microphone input jack in the waistband PA amplifier.
4. Turn on the power of the waistband PA amplifier. The Power On green LED light will be turned on.
5. Adjust the volume control knob in the amplifier to have an optimal sound level.
6. Adjust the Tone control knob of the amplifier to achieve best affects of the sound quality.
7. You can connect the Radio/Cassette player/MD/MP3/CD with the AUX IN jack of this PA amplifier to play music too.
RECOMMENDATIONS FOR WA-700 OPERATION
1. Do not drop the waistband PAamplifier on the floor or strike the waistband
PAamplifier with any object.
2. Charge always the battery after using it and charge the full battery if the
waistband PA amplifier is not going to be used for a long time in order to get
longer the life span of it.
3. This device includes a magnetic speaker, so it must be kept away from
high-power wireless emitting sources to avoid signal interference.
TECHNICAL FEATURES
- Output power:
10 W.
6 W. max (In full baterry).
- RMS power:
Built-in DC (7,4 V / 1000 mAH) Lithium battery.
- Power supply:
100 Hz - 20K Hz.
- Frequency response:
<1% (1W).
- Distortion factor:
250mV / 1k.
- Auxiliar input:
-20ºC. a +45ºC.
- Operating temperature:
104 x 86 x 42,5 mm.
- Dimensions:
245 g.
- Weight:
Main Avda. BARCELONA, 24
Office 08970 - SANT JOAN DESPÍ
BARCELONA - ESPAÑA
Tel: 34-93 477 28 54
Fax: 34-93 261 17 52
ude@udeaudio.com
Madrid C/ LUIS I, 88, 3ª planta
Delegation 28031 - MADRID
ESPAÑA
Tel: 34-91 311 60 76
Fax: 34-91 450 19 97
centro@udeaudio.com
UDE reserves the right to modify the technical characteristics of its products without previous notice
610.337A
1 2
WA-700
6
11
3
Charge
AUX IN
DC 9V
2
1
7
8
ON/OFF/VOL
5
Treble/Bass VOL
MIN
MAX
MIC IN Power
4
9
10
7 BATTERY CHARGE LED.
1 BASS / TREBLE VOL.
This knob adjusts bass and treble of overall sound.
2 ON / OFF / VOL.
Volume remote control with on/off switch.
3 POWER LED (LOW POWER LED).
This LED in Green means the device is working and the battery
charge is correct. In orange means the battery is in low level and
must be recharged.
When Led is in orange whereas the device is working shortly after
will turn off automatically.
(Low battery protection).
4 CONNECTOR FOR MICROPHONE.
3.5mm jack for electret. Microphone.
5 LOUDSPEAKER.
10 BUILT-IN 7.4V/1000Mah LI BATTERY (Inside).
6 BELT.
11 HEADSET MICROPHONE (CONDENSER).
When the battery is charging, LED is in orange. When the battery is fully
charged shows the green LED.
8 AUXILIAR INPUT.
This is a 3.5mm two-channel stereoAUX input, for instance a MP3 player. It
is recommended to use a two-channel stereo wire.
9 DC 9V/500mA CHARGE INPUT JACK.
To be sure to turn OFF the PA amplifier before disconnecting the battery
charger. Connect up the connector from the battery charger to the device,
and then connect the battery charger plug in a net-socket 230Vac.
In by mistake, the device switch is ON while is being charged, the CHARGE
LED is flashing all the time. The battery charger provided is only for
charging this battery. Do not try to use the device with no internal battery.
EN CASO DE PROBLEMAS
Problem
No power or
not sound
Screaming
sound
Distorted
sound
Possible causes
Power is OFF.
The battery need to be charged.
The amplifier is broken down.
Trebles are too high.
Volume adjustment is too high.
The microphone is too near to the loudspeaker
or faced it.
The rechargeable battery needs to be charged.
The vocal sound level exceeds the max. sound
level of WA-700.
The LI battery need to be replaced.
The built-in LI
battery can not be Defective charger.
recharged
Defective amplifier.
Solutions
To turn the device on.
To charge the battery.
Go to the authorized technical service.
To turn down the treble volume.
To turn down the volume.
To move the microphone away of the
loudspeaker and faced it properly.
Put in charge.
Reduce the overall sound level
until the distortion disappears.
Replace the built-in LI battery.
Replace the charger.
Go to the authorized technical service.
CHARGE THE LITHIUM CELL
1. When the power LED turns in Orange, please the device in OFF position, plug one end of the DC 9V AC/DC adaptor to the charge input jack of
the PA amplifier, and plug the other end of it to the local AC power socket. The CHARGE LED will be orange, and when the charge will be finished, it
changes in green. Then plug out the charger of theAC power socket, and later of the device.
2. Normal charge time is approx 5 hours. It is recommended not to charge the Li cell over 24 hours. Normal charge temperature is between 0 and
45ºC.
3. Normal working time is approx 5 hours with full charged battery.
4. The built-in Lithium battery could be fully charged for more than 500 times.
5. If you are not going to use it for 1 or 6 months, please recharge the PAamplifier for around 1.54 hours, and keep it in a dry and cool place. To make
sure that the PAamplifier in OFF position.
CAUTIONS:
Recharge the built-in Lithium battery every 6 months at least.
The storage temperature of the battery is -5-35ºC, humidity > 75%
Do not put the amplifier under the sunshine, close to heat sources.
The device has a battery inside the machine. Do not throw it into the fire, water, as well as not to expose in steam places.
Keep the battery out of the reach of children.
610.337A
2 2
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising