digitally powered TSM 15 dp

Multi Purpose Sound System - digitally powered
TSM 15 dp
The TSM 15 dp is a multi-functional high-end
loudspeaker system featuring integrated digital amplifier electronics with 1000 / 350 Watt
AES powerand a DSP Controller. The 15“ Neodym / 1.4“ Neodym driver are each driven by
a separate amplifier channel. A range of factory-configured presets and volume settings
can be selected. It has been optimised for use
as a monitor, however the rotatable horn makes the TSM 15 dp equally suited to classic
fullrange sound reinforcement applications,
either vertically or horizontally mounted. A
wide range of possibilities for mounting flying accessories make the TSM 15 dp an interesting option for permanent installations.
PRODUCT SPECIFICATIONS
Speaker Components
Description
Amp Power
Rated Current
SPL Peak @ 1 m
Max. Input Signal
DSP
AD / DA
Latency
Usable Range
Tuning Frequency excursion minimum
X-Overpoint acoustical
Coverage horizontal / vertical
Max. Splay Angle
Connectors
Handles
Rigging / Fittings
Weight
Size height x width x depth
Order No.
Copyright 07. 2017
15“ Nd / 1,4“ Nd
Multi Purpose Sound System
LF: 1000 W AES / 110-230 V
HF: 350 W AES / 110-230 V
0,95 A @ 230 V
131 dB
25 dBu
HDLM FPGA Processing 32 bit floating point
The TSM 15 dp can be fitted with a
narrower horn with a coverage angle
of 60° x 50°.
24 bit / 96 kHz
0,8 ms (analog in to analog out)
45 Hz - 18 kHz (-6 dB)
50 Hz
Depends on preset
90° x 60° - rotatable
60° x 50° - rotatable (optional)
--Neutrik XLR in/out
Neutrik PowerCon in/out
2x
3 x M10 / 6 x M8
35 mm pole mount
27 kg
69,8 x 45,0 x 41,0 cm
00950/II/9060/dp (90° x 60°-version)
00950/II/6050/dp (60° x 50°-version)
The 35 mm threaded stand socket is
integrated in the carrying handle.
DIMENSIONS
698
35
°
40
410
450
450
340
M8
M8
M8
70
M8
130
180
410
M10
M8
450
M8
M8
410
M8
130
M10
698
coverage patterns
2D Directivity Plot - horizontal
2
TSM 15 dp
2D Directivity Plot - vertical
Digitally Powered
The TSM 15 dp features integrated digital amplifier
High-grade electronic components from the industrial sector
electronics with a DSP controller. Various factory-
and a first-class circuit design ensure excellent audio quality
configured presets and volume settings can be selected.
with low distortion and a minimal noise floor.
Highly efficient and “intelligent” limiter systems ensure
optimum protection against overload, without restricting the
possibilities offered by this high-performance sound system.
Level
Adjustment in 3 dB steps
(-6 dB to +3 dB).
Presets
Flat
This setting provides a linear
frequency response with a neutral
sound characteristics. Standard
setting for many applications.
Status
Mute LED
Red light when the system
is muted or under technically
critical conditions.
HP 100 (high pass filter)
Activates a high pass filter (cut-off
frequency 100 Hz) for use in
combination with a subwoofer.
Limit LED
Yellow light when the limiter
is restricting the level.
Boost
The same neutral response as the
„Flat“setting, but with the addition
of a bass boost.
Signal LED
Green light when the input signal
exceeds -20 dBu.
Soft
Reduces the level in the frequency
range from 2.5 - 5 kHz, to which the
ear is particularly sensitive. This
setting is recommended for high level
reproduction of highly compressed
music tracks.
Power LED
Green light when the system
is switched on.
PowerCon (grey)
110-230 V / 16 A max.
loop through connector
PowerCon (blue)
Power supply
110-230 V / 16 A max.
1000W / 350W
Mode - key
Switches between control modes
Status, Level and Presets.
Set - key
Setting of various values and
Mute on / off.
XLR
Symmetrical analog input,
max. Input +25 dBu.
Effective filter protection against
HF interference and DC Voltages.
Virtual ground lift.
3
TSM 15 dp
ACCESSORIES TSM 15 dp
Flying Bracket
Doughty Trigger Clamp
for TSM 15 / A 8 / F 8
incl. screws
(per unit: 2 pcs. M10 x 30 adjustable
handle screws with axial bearing)
for flying brackets,
SWL 200 kg
Order No. 01222
Order No. 01217/set
Flying Bracket
Steel Safety Cable
for TSM 15/ A 8
horizontal alignment, incl. screws
(per unit: 2 pcs. adapters, M10 hex
lock nuts, flat- and rubber washers)
4 mm - 50 cm
Order No. 01376
Order No. 01217/H/set
Handle Screw
Chain Fastener
for flying brackets,
axial bearing
M10 x 30
VBS 7 mm
Order No. 01378
Order No. 08374
Ergostyle Lobe Knob
Ring Screw
for flying brackets,
M10 x20, with grip, adjustable
M10– DIN 580
Order No. 73700
Order No. 08171
Flange
TV Spigot
for flying brackets,
35 mm ø –> M10,
10 mm internal thread,
28 mm ø
Order No. 08126
Order No. 08128
Rubber Washer
for flying brackets,
40 mm
Order No. 01205
A total of three M10 and six M8
flying points can be utilised for
mounting the extensive accessories.
4
TSM 15 dp
www.seeburg.net
ACCESSORIES TSM 15 dp
Wall Mount
Cover
for U-brackets, 40 kg max., incl. screws
(M10 x 70 mm socket head screw,
M10 hex lock nut and flat washer)
for TSM 15 / A 8,
padded
Order No. 01240
for 15“ speakers
Order No. 08130/F/400
Wall Mount
Rain Cover
with tilt unit, 40 kg max.
for TSM 15 / A 8,
Order No. 08130
Order No. 01240/outdoor
Speaker Stand
Flight Case
Incl. wind up, 50 kg max.,
height 129 to 204 cm, K&M
for 2 pcs. TSM 15 / A 8 / A 8 Sub,
heavy duty, 9,0 mm birch multiplex,
PVC coated, 6 x recessed sprung
handles, 4 x butterfly catches, 4 x 100
mm blue wheels, 2 pcs. with brake,
interior lined with felt.
Order No. 03011
50 kg max., K&M
Order No. 03010
Order No. 16012/pro
Hexagon Grille
for TSM 15 front grille version,
for replacement, foam behind
Order No. 97075/hex/compl.
Hybrid Cable System
PowerCon-PowerCon / XLR-XLR
5 m
10 m
15 m
Order No. 08464
Order No. 08466
Order No. 08468
Front grille version.
5
TSM 15 dp
SEEBURG acoustic line
Produktions- und Vertriebs GmbH
Fon: +49 (0)7307 97 00-0
Fax: +49 (0)7307 97 00-29
Auweg 32
D-89250 Senden-Freudenegg
info@seeburg.net
www.seeburg.net

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project