Voltage tester High voltage tester Ex-testing devices

Electrical Testing Devices
Voltage tester High voltage tester Ex-testing devices
Made in Germany
2
Content
3
Content
Our strengths
4
Quality and manufacturing „Made in Germany“
6
Technical support / service
8
Contact Person
9
Social responsibility
Voltage tester up to 1 kV
12 Type overview
Quality creates safety
Subject to technical modifications, 02-2017
14
Prüfball SPB analog
16
Prüfball SPB digital
18
Prüfball SPB special types
20
Electricity meter Prüfball ZAP analog
22
Electricity meter Prüfball ZAP digital
24
Accessories SPB / ZAP
26
MultiSafe DSP 4
28
MultiSafe DSP 5
30
ProfiSafe LSP 4
32
Accessories DSP / LSP
34
Telescope voltage tester TT 1
High voltage tester up to 36 kV
38
Type overview
40
MultiSafe HS 5
42
MultiSafe HS 11
44
MultiSafe HS 36
46
Telescope voltage tester TT 3
48
Telescope voltage tester TT 36
Ex-proof measuring and testing devices
52
Type overview
54
Earth resistance tester ΩMegaSafe EP
56
Insulation tester ΩMegaSafe ISO
58
Accessories EP / ISO
60
Multimeter VarioSafe EXM 25
62
Accessories EXM
Sale
64
Article list
78
Inquiry and order
Made in Germany
4
Our strengths
Manufacturing „Made in Germany“
Quality creates safety
Quality is a precondition for safe products
As a family enterprise, we set extraordinary
standards in the quality and safety of our
measuring and testing equipment.
With our high-quality products, we provide
our customers maximum safety within electrical
systems.
Tradition and innovation, complete
manufacturing and quality control in Germany,
as well as customer-specific solutions in various
application areas are the strengths and the
guarantee of the quality promise of Tietzsch.
All our products are „Made in Germany“.
Based on complete in-house manufacturing process, we ensure the highest level of quality and provide you with
special tailor-made solutions.
This includes the careful selection of high-quality materials and the complete testing of each individual device.
Tradition and innovation
Company headquarters and production in Ennepetal
Already in 1953, we were able to manufacture the
particularly robust and safe „Prüfball“ with its innovative dust-proof rubber housing.
1953
Today
over 60 years of experience
Mechanical processing for accessories according to customer
requirements
Today, we develop and produce voltage testers,
high voltage testers and explosion-proof devices
under highest quality and safety requirements and
offer customised solutions tailor-made applications.
Easy operation and reliable displays underline the
functionality of our devices and correspond with
today‘s customer requirements.
Ensuring quality through our own electronics production
Cer tified safety and quality
NOTICE OF COMPLETION
AND
AUTHORIZATION TO APPLY THE UL MARK
04/24/2014 Rev.01
RUDOLPH TIETZSCH GMBH & CO. KG
MR. MICHAEL TIETZSCH
WILLRINGHAUSER STRASSE 18
ENNEPETAL 58256, GERMANY
Our Reference:
File E358089, Vol. X1
Project Number
4786061052
Your Reference:
21.8.13
Project Scope:
VDE MOU Cooperative Agreement for Two-pole low voltage detector DSP 4UL acc. to
UL61010-1 3rd Edition + Particular 2-030
Note: IEC 61010-031 also evaluated.
Dear Mr. MICHAEL TIETZSCH:
Congratulations! UL's investigation of your product(s) has been completed under the above Reference Number and
the product was determined to comply with the applicable requirements. This letter temporarily supplements the UL
Follow-Up Services Procedure and serves as authorization to apply the UL Mark at authorized factories under UL's
Follow-Up Service Program. To provide your manufacturer(s) with the intended authorization to use the UL Mark,
you must send a copy of this notice to each manufacturing location currently authorized under File E358089, Vol. X1
and including any special instructions as indicated in the addendum to this letter.
Records in the Follow-Up Services Procedure covering the product are now being prepared and will be sent in the
near future. Until then, this letter authorizes application of the UL Mark for 90 days from the date indicated above.
Additional requirements related to your responsibilities as the Applicant can be found in the document “Applicant
responsibilities related to Early Authorizations” that can be found at the following web-site:
http://www.ul.com/EAResponsibilities
Any information and documentation provided to you involving UL Mark services are provided on behalf of UL LLC
(UL) or any authorized licensee of UL.
We are excited you are now able to apply the UL Mark to your products and appreciate your business. Feel free to
contact me or any of our Customer Service representatives if you have any questions.
Very truly yours,
Reviewed by:
Bruno Motta
49 89 622 703-43
Project Engineer
[email protected]
William R. Carney
847/664-1088
Chief Engineer Director I
[email protected]
CC: Koen Schilleman
+31654254690
Field Specialist II
[email protected]
Walter Hofmair
+49 89 622 703-23
Staff Engineer
[email protected]
Assembly of highly complex measuring systems
Our measuring and testing equipment is subject to
constant quality control.
Regular production monitoring is carried out by
VDE, UL and DEKRA.
▪
VDE certificates for voltage testers and their annual
production control
▪
UL / CSA certificate for the USA-Canada version of
the MultiSafe
▪DEKRA-EXAM and TÜV certificates for
explosion-proof measuring instruments and the
annual QM auditing of the production facility
Tests up to 70 kV in our high voltage laboratory
NBK926F-799265
This is an electronically generated letter. Signatures are not required for this document to be valid.
Page 1 of 1
100% inspection of each device
Made in Germany
5
6
Our strengths
Technical suppor t / ser vice
7
Repeated examination and calibration
In addition to our high-quality products, we offer
comprehensive and professional customer service and technical support.
For voltage testers over 1 kV, the period of
repeated examination may not exceed 6 years.
This is also recommended for voltage testers
up to 1000V.
Our contact persons and specialists will be
gladly available for your questions concerning
our products and services.
Technical hotline
Depending on the area of application and the
demands on the measuring and testing
equipment, a repeated examination or a
recalibration within a shorter period of time
may be advisable.
+49 2333 861 77 03
We will find your solution
Are you looking for measuring and testing
equipment for special applications?
Repair
We have very high demands on our measuring
and testing equipment, which is subject to
constant quality control.
Most modern electronics and high-quality
materials guarantee a long life.
Our service:
We would be pleased to advise you on specific
problems and find tailor-made solutions.
With our team of specialists and many years of
experience, we demonstrate our strength and
flexibility, even in small series.
If a tester shows a damage or malfunction,
you can have it repaired quickly and unbureaucratically.
We look forward to new challenges.
On site for you
Specific application place special
demands on the measuring and testing
equipment.
We would be glad to come to you to support
you in special applications and develop joint
solutions.
Please send back the device to:
Rudolph Tietzsch GmbH & Co. KG
Service
Willringhauser Str. 18
58256 Ennepetal
Made in Germany
8
Our strengths
Social responsibility
Contact person
To assume social responsibility means to deal
with ecological resources in a responsible
manner. In this sense, we have developed completely maintenance-free voltage testers with
innovative and particularly power-saving circuits.
These work with all additional functions without
batteries.
Simone Niemann
Stefanie Hiby
[email protected]
[email protected]
Michael Tietzsch
Heiko Dutz
[email protected]
[email protected]
Alexander Tietzsch
Fabian Runke
[email protected]
[email protected]
Sales
Managing director
Construction / development
For production processes in our company, we
have taken voluntary measures to reduce CO2
emissions. We almost exclusively use regenerative energies.
Electricity, which can not be generated by own
solar systems, is supplemented by regional
green power.
Additionally we installed heat pumps, which
operate with regenerative energy and therefore
are a significant contribution to environmental
protection.
Sales
Technical director
QM and High voltage laboratory
Urkunde
Sale and service: +49 2333 759 89
Technical hotline: +49 2333 861 77 03
Mo. - Thu. 8:00 am - 4:00 pm
Fr.
8:00 am - 2:00 pm
aus der Region für die Region
Seit dem 1. April 2012 fördert die Firma
Rudolph Tietzsch GmbH & Co. KG
Willringhauser Straße 18
58256 Ennepetal
als grünstrom-Kunde Projekte und Modellvorhaben,
die einen Beitrag zum Klimaschutz
und zur Senkung der CO2-Emmisionen leisten.
Gevelsberg, 14. Dezember 2016
Uwe Träris, Vorstand
Made in Germany
9
10
Voltage tester up to 1 kV
Voltage tester up to 1 kV
Made in Germany
11
12
Voltage tester up to 1 kV
13
Type over view voltage tester up to 1 kV
Prüfball SPB Analog
Prüfball SPB Digital
▪One-piece casing made of solid rubber
▪Extremely safe and robust
▪Maintenance-free without battery
▪One-piece casing made of solid rubber
▪Backlit LC-Display
▪Maintenance-free due to Longlife battery
500B
Indicating range
Voltage warning LED
without battery
Voltage indication with value
without battery
500PR
1000B
20-500 V
■
■
Connectible load for 30 mA RCD
1000PR
50-1000 V
■
■
■
■
■
■
■
■
Prüfball Z AP
▪Robust rubber casing
▪Precise display
▪Integrated test for electricity meter ▪Large measuring range
▪Maintenance-free
▪large illuminated LCD
500PRA
500L
1000L
ZAP 350
20-500 V
50-500 V
50-1000 V
20-500 V
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
Connectible load for electricity meter
■
■
Acoustic signal at load
Phase test single-pole
Phase sequence test
Continuity test
ZAP 350L
ZAP 1050L
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
4
50-500 V
350 W
Vibration at load
MultiSafe DSP 4
4F
4ST
4FST
0,1-1200 V AC / 1500 V DC
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
Frequency meter
■
Protection category
IP 65
Power supply
Overvoltage category
VDE GS in accordance with IEC 61243-3
Article number
without battery*
CAT IV 500 V
Longlife Battery**
CAT IV 1000 V
CAT IV 500V
CAT IV 500 V
CAT IV 1000 V
■
■
■
■
■
■
81411
81401
81414
81404
81402
81422
81423
14
* Maintenance-free due to integrated Lithium accu for additional functions, which recharges during voltage tests
** Maintenance-free due to integrated Longlife battery for additional functions
16
■
■
■
■
■
■
5ST
LSP 4L
■
■
■
■
■
LSP 4B
12-690 V
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
0,01 - 999 kΩ
■
■
IP 65
■
Page
■
IP 65
5
0,1-1200 V AC / 1500 V DC
Front spot lighting
■
5B
▪Compact
▪Easy handling
▪Maintenance-free without battery
12 W
1 - 1999 kΩ
■
▪Precise display
▪Very versatile
▪2-colour LC display
1050 W
Resistance measuring device
Backlighted LCD
MultiSafe DSP 5 ProfiSafe LSP 4
■
■
■
■
■
■
■
IP 65
IP 65
IP 65
without
battery*
Longlife battery**
battery 9V 6LR61
battery 2x 1,5 V AAA
without battery*
CAT IV 300 V
CAT III 500 V
CAT IV 500 V
CAT IV 600 V
CAT III 1000 V
CAT IV 1000 V
CAT IV 600 V
CAT III 690 V
81314
20
81315
81316
22
■
■
■
■
■
■
■
■
■
84402
84403
84405
84406
84502
84501
84503
85422
85421
26
28
30
14
Voltage tester up to 1 kV
Prüfball SPB Analog
Maintenace-free
The display of the voltage is supplied
from the mains when checking.
Also for the additional functions the
Prüfball does not need a battery.
The integrated Li-battery is charged with
every voltage test.
Extreme robust safety casing made of solid rubber
Technical data
Two-pole voltage tester Prüfball SPB
tested and certified by VDE in accordance
with EN/IEC 61243-3 (VDE 0682 part 401)
Type / Nominal voltage
SPB 500B / PR / PRA
SPB 1000B / PR
50 ... 500 V AC/DC
50 ... 1000 V AC/DC
Display range scale
SPB 500PR/PRA
SPB 1000PR
20 ... 500 V AC/DC
50 ... 1000 V AC/DC
Frequency
500 V or 1000 V measurement range available
NEW
Direct voltage indication
without push buttons! - CAT IV 1000V
Buttons only for additional load
Approved safety concepts
The case of solid rubber encloses the
measuring system and switching
mechanism:
▪ Impact resistant, shockproof
▪ Dust- and waterproof
▪ Overvoltage protection
Exact, precise display
Reliable test by three display systems:
▪ Direct indication without buttons by
exact moving-iron instrument
▪ LCD-indicator
▪ LEDs
1
4
B-Type without push buttons
The Prüfball SPB is the right voltage
tester for operation in energy supply
- robust, precise, maintenance-free.
▪ One-piece safety casing
made of solid rubber,
extremely voltage-proof,
unbreakable dust- and waterproof
▪ Easy operation, clear indication
▪ Phase, phase sequence and
continuity tester, RCD-tripping
▪ Reliable phase sequence test by
microcontroller analysis,
possible with gloves
▪ Without battery,
maintenance-free lifelong
▪ CAT IV 1000 V
EN/IEC 61243-3
CAT IV 1000 V
2
3
1.LED-triangle for phase sequence
2.LCD indicator
with big V for hazardous voltage,
type of voltage and continuity
3.Exact analog display, direct-display
4.LED-signal for hazardous voltage
between 50 V AC / 120 V DC
and for phase indication
Additional functions
▪ Reliable phase- and phase sequence
test with new error detection for
reliable indication,
possible with gloves
▪ Continuity tester
▪ PR-type with additional load and
vibration indication for tripping
RCDs (Residual Current Device)
▪ PRA-type with additional load and
acoustic signal for tripping
RCDs (Residual Current Device)
0...100 Hz
Voltage indication
High-impedance, direct reading:
LCD-indicator, LED ≥ 50 V AC / 120 V DC
moving-coil instrument, large 90°-scale
50 ... 500 V or 50 ... 1000 V, effective value accuracy
cl 2,5: basic accuracy 2,5% + reading errors
low-impendance, switched additional load:
vibration-indicator in the handgrip > 180 V (for PR)
acousticsignal (SPB 500PRA)
> 57 dB interval according to ISO 3744
Continuity
Ω-symbol in LCD
0 ... 1 MΩ
Phase / Phase sequence / Polarity
Extensions for higher safety during test at
overhead lines and busbars
Wide range of accessories
Accessories are not included in scope of
delivery
▪ Bage
▪ Extensions for tests at overhead lines
▪ Plastic casing for extensions
▪ Test prods for test objects difficult to
access
▪ Insertion prods for underground cable
▪ Adapter for test lines with
4-mm-standard plug
LED- and LCD triangle ≥ 165 V
for phase unipolar
for phase sequence two-pole
type of voltage + / - / ~ by LCD signs
Input resistance
Direct: switched:
SPB 500PR/PRA:
SPB 500B:
SPB 1000PR:
SPB 1000B:
245 kΩ bei 500 V
245 kΩ bei 500 V
315 kΩ bei 1000 V
315 kΩ bei 1000 V
4,3...7 kΩ tripping of 30 mA-RCDs
Current peak value
Direct:
< 3,5 mA
switched: < 300 mA at 1000 V
35 mA at 230 V - RCD-tripping
On-time
120 s
Overvoltage category
CAT IV 500 V / CAT IV 1000 V
Surge voltage strength
19,2 kV case insulation to user
12 kV circuit between test prods
Insulation test voltage
6 kV-unit inspection of case and line
Operating temperature
-15°C ... + 45°C
Power supply
Maintenance-free - without battery, test functions
voltage and acoustic are supplied from the mains,
continuity, phase and phase sequence by
Li-storage, refreshable
Casing
Close contacts are well reached with
flexible pin prods
Unbreakable silicone rubber, display cover made of
indestructible polycarbonate
Protection category
IP 65, device can be used in moist environments
Line
Type
Article no.
Phase- /
phase sequence
test
Continuity
test
Additional load
30 mA-RCDtripping
Vibration
indication
for load
SPB 500B
50-500 V
81411


SPB 1000B
50-1000 V
81414


SPB 500PR
50-500 V
81401




SPB 1000PR
50-1000 V
81404




SPB 500PRA
50-500 V
81402



Acoustic
indication
for load
PUR sheated cable, 1000 V, 1m
with protective cap for electrodes
Dimensions / Weight
274 x 75 x 47 mm (display part) / 420 g

Made in Germany
15
16
Voltage tester up to 1 kV
Technical data
Prüfball SPB Digital
Two-pole voltage tester Prüfball SPB-L
tested and certified by VDE in accordance
with EN/IEC 61243-3 (VDE 0682 part 401)
Precise display in casing made of solid rubber
Type / Nominal voltage
SPB 500L
SPB 1000L
50 ... 500 V AC/DC
50 ... 1000 V AC/DC
Display range
SPB 500L
SPB 1000L
50 ... 500 V AC/DC
50 ... 1000 V AC/DC
Frequency
0 - 2000 Hz
Voltage indication
SPB 500L
Extensions for higher safety during test at
overhead lines and busbars
500 V- or 1000 V-LCD available
NEW
Switchable load now also
with CAT IV 1000 V
Direct voltage indication without pressed
buttons
Clear indication
Reliable test by two display systems and
connectible load:
▪ Bright LEDs and illuminated LCD
▪ High accuracy
▪ Additional load for tripping RCDs and
to determine interference voltages
1
5
The Prüfball SPB digital combines
modern microcontroller applications
with approved features of the
analog Prüfball robust, precise and maintenance-free
▪ One-piece safety casing
made of solid rubber,
extremely voltage proof,
unbreakable, dust- and waterproof
2
4
3
▪ Additional load (RCD-tripping)
▪ Reliable phase sequence test by
microcontroller analysis,
possible with gloves
Continuity
0 - 1000 kΩ
(resolution 50 kΩ +/- 150 kΩ)
Phase / Phase sequence / Polarity
capacitive, without accessible electrode
arrows for phase sequence
POL for phase single-pole
tests possible with gloves
voltage type - / ~
Input resistance
direct: 500L: 150 - 190 kΩ,
1000L: 300 - 350 kΩ
switched: 4,3...7 kΩ
Current peak value
direct:
< 3,5 mA
switched: < 300 mA
(35 mA at 230 V - RCD-tripping)
On-time
120 s
Overvoltage category
CAT IV 500 V / CAT IV 1000 V
Surge voltage strength
19,2 kV case insulation to user
circuit between test prods:
8 kV, SPB 500L, 12 kV SPB 1000L
Insulation test
6 kV unit inspection of case and line
Operating temperature
-15°C ... + 45°C
Power supply
maintenance-free - without battery,
test functions voltage, phase sequence are
supplied from the mains,
continuity by Li-Longlife battery
Casing
without pressed buttons
continuity test,
Wide range of accessories
Accessories are not included in scope of
delivery
▪ Bags
▪ Extensions for tests at overhead lines
▪ Plastic sleeve for extensions
▪ Test prods for test objects difficult to
access
▪ Insertion prods for underground cable
▪ Adapter for test lines with
4-mm-standard plug
1.Bargraph
2.Large numerals and symbols for
voltage AC/DC and resistance
3.LEDs
4.Indication of connected load
5.Arrows for phase sequence
▪ Direct reading of all functions
▪ Phase, phase sequence and
Approved safety concepts
The case of solid rubber encloses the
measuring system and switching
mechanism:
▪ Impact resistant, shockproof
▪ Dust- and waterproof
▪ Overvoltage protection
▪ Current-limiting safety components
for CAT IV 1000 V
▪ Safe two-hand operation for the
low-resistance test with special
switches with large contact distance
high-impedance, direct reading:
LED ≥ 50 V AC and ≥ 120 V DC
LCD ≥ 50 V backlight
(accuracy 2,5 % + 5 digit)
low-impendance, switched:
symbol for connected load
unbreakable silicone rubber, display cover made
of indestructible polycarbonate
+
Protection category
LCD and LED indication when test prod
applied to phase
IP 65, device can be used in moist environments
Line
Maintenace-free
The display is supplied from the mains
while performing tests.
The additional functions are powered by a
Longlife battery.
PUR sheated cable, 1000 V, 1m
with protective cap for electrodes
Dimensions / Weight
274 x 75 x 47 mm (display part) / 415 g
▪ Maintenance-free
▪ CAT IV 1000 V
Type
EN/IEC 61243-3
CAT IV 1000 V
Article no.
Phase- /
phase sequence
test
Continuity
test
Additional load
30 mA-RCDtripping
LCD
value
SPB 500L
50-500 V
81422




SPB 1000L
50-1000 V
81423




Made in Germany
17
18
Voltage tester up to 1 kV
Prüfball SPB-HW for floods
Prüfball SPB-UB for subways
Determine absence of voltage in flooded cellars
Voltage testing on railways with a third rail
▪ One-piece safety casing made of solid rubber,
extremely impact resistant, dust- and waterproof
▪One-piece safety casing made of solid
NEW
▪ Direct voltage indication by red LED
and backlighted LCD
rubber, extremely impact resistant,
dust- and waterproof
with switchable load to determine
interference voltage - CAT IV 1000 V
▪ Integrated self-test by green
LED and LCD
▪Highest safety against surge voltage
CAT IV, 1000 V
▪Direct voltage indication by red LED
and backlighted LCD
▪ Perfectly readable in dark environments
▪Integrated self-test by green LED and LCD
▪Extension and magnet for easy testing at
EN/IEC 61243-3
CAT IV 1000 V
Flooded electrical installations, such as house connections or feed-in of
solar systems, can cause life-threatening voltage in the water. As soon
as the safety elements are flooded, they cannot provide protection any
longer.
The SPB-HW Prüfball warns the user against hazardous
voltages before entering the hazard zone and inserting pumps.
50 – 500 V AC/DC
Voltage indication
Earth connection
SPB 500L-HW
50 - 500 V
SET SPB-HW
50 - 500 V
500 mm
extension
81317




81417


PUR sheated cable, 1000 V, 30 m
grounding terminal with safety rope
Extension
Insulated stainless steel tube, screwable, 60 cm
Dimensions / Weight
The two-pole voltage tester SPB 1000L-UB makes it easier to check
the third rail at the side. The angled extension increases the safety
during tests.
With the magnet,
the SPB-UB can be
attached to the drive
rail on one side.
With the switchable
load up to 1000 V,
interference voltages
can be reliably
detected.
180 x 240 x 360 mm / 3,2 kg (set)
Screw clamp
for mast

indication up to 1500 V DC
Voltage indication
LED ≥ 50 V AC / 120 V DC
LCD ≥ 50 V backlighted
accuracy 2,5 % + 5 digit
Casing
Test of ground
connection
50 –1000 V AC / DC
Nominal voltage
Unbreakable silicone rubber, display cover made
of indestructible polycarbonate, IP 65
Self-test
Nominal voltage
Two-pole by connected ground electrode,
additionally single-pole in case of erroneous grounding
Integrated self-test with checking proper ground connection
Article no.
Technical data SPB 1000L-UB
Voltage testing
Self-test
Type
third rails
Technical data SPB 500L-HW
LED ≥ 50 V AC / 120 V DC
LCD ≥ 50 V backlighted
Earthing with earth spike,
connection by strain reliefed
clamp. Integrated self-test
Flooded electrical systems can lead to invisible hazards for earth connection.
in the water.
19
Bag

Self-test
Green LED for test of contact to the earth
Additional load
Push buttons for load (7kΩ) ,
LCD symbol as load indication
Casing
Unbreakable silicone rubber, display cover made
of indestructible polycarbonate, IP 65
Earth connection
PUR sheated cable, 1000 V AC / 1500 V DC, 1 m
Accessories
Insulated stainless steel tube, attachable, L-formed, 250
mm, magnet for rail
Dimension / Weight
274 x 75 x 47 mm / 400 g (basic)
Earth spike
Type
Article no.
Self-test with
green LED
Single pole
voltage warning
Additional load,
to determine
interference voltage
LCD
value
SPB 1000L-UB
50 - 1000 V
81391




SET SPB-UB
50 - 1000 V
81390




Angled
extension
Magnet for
rail


20
Voltage tester up to 1 kV
21
Technical data
Prüfball Z AP 350 Analog
Electricity meter and voltage tester ZAP 350
according to EN/IEC 61243-3 with special
cable in accordance with BG test report
Electricity meter tester with 350 W load
Nominal voltage
50 ... 500 V AC/DC
Display range
NEW
ZAP - line
The patented special cable allows spacesaving and water-protected design
▪ Fast start-up test through high power
▪ No overheating of device or handles
▪ Enclosed casing without ventilation
direct voltage indication
without push buttons!
Integrated 350W-load for fast start-up
tests at electricity meters
Universal testing device for meter
installation and power suppliers
Five important functions combined in one
device
▪ Electricity meter tester for all directly
measuring electricity meters
▪ Voltage tester 50 - 500 V
▪ Phase tester
▪ Phase sequence tester
▪ Continuity and self-tester
The Prüfball ZAP 350 is an extremely
safe testing device for fast start-up tests
at initial operation of electricity meters,
combined with a high-quality voltage
tester.
▪ Direct indication of voltage
up to 500 V
▪Connectible load of 350 W for
fast start-up tests of electricity meters
Phase,
phase sequence and
▪
continuity tester
▪Thermal and overvoltage protection
▪Without battery,
Technology and safety
High-quality elements guarantee operation
and safety under extreme conditions
▪ Solid rubber case,
dust- and waterproof IP 65
▪ Overvoltage protection – CAT IV
▪ Maintenance-free - no battery required
▪ Secure two-hand tripping device for
low resistive checks through special
push button with wide contact gap in
both handles
▪ Integrated thermo-switch to avoid
overheating at multiple use
▪ Voltage monitoring as protection
against mistakes in voltage ranges
(phase/phase) during load tests
Accessories
Accessories are not included in scope of
delivery
▪ Bag of leather or artificial leather
keeping the ZAP in the bag avoid bending the connection line
▪ Pin prod for tight contacts (see accessories for Prüfball SPB)
50 ... 500 V AC/DC
Frequency
0...100 Hz
Voltage indication
High-impendance, direct reading:
1 LED and LCD-indicator ≥ 50 V,
moving-coil instrument 50 ... 500 V
Cl 2,5: basic accuracy 2,5 % + reading errors
large 90°-scale, effective value display
low resistive connected: load LED 1,5 A
Continuity
Ω-symbol in LCD 0 ... 1 MΩ
automatic switch-over to voltage
Phase / Phase sequence
LED- and LCD-triangle ≥ 165 V
for phase single-pole and
for phase sequence two-pole
Input resistance
Direct (high-impendance)
switched load for start-up test
245 kΩ
150 Ω
Current peak value
< 30 mA / 500 V
with connected load approx. 1,5 A / 230 V
On-time
120 s
Connectible load
Approx. 350 W at 230 V
Overvoltage protection
Automatic switch-off of load at > 260 V
Overload protection
Flexible pin prods for tight contacts
Thermo-switch, thermo-point at >70°C
Overvoltage category
CAT IV 300 V in accordance with
IEC 60664-1 (VDE 0110)
Surge voltage strength
8 kV case insulation to user
6 kV circuit between test prods
Insulation test voltage
Exact, precise display
Reliable test by three display systems
and connectible load:
▪ Direct indication by LCD indicator and
LEDs at 50 V
▪ Direct indication of analog measuring
system
▪ Direct indication of load
with 350 W by load-LED 1,5 A
▪ High accuracy through moving-coil
instrument class 2,5
6 kV unit inspection of case and line
Operating temperature
-15°C ... + 45°C
Power supply
Maintenance-free - without battery,
test functions voltage, phase sequence and acoustic signal are supplied from the mains,
continuity by Li-storage, refreshable
Casing
Unbreakable silicone rubber, display cover made of
indestructible polycarbonate
maintenance-free lifelong
Protection category
IP 65, device can be used in moist environments
Line
Patented thermo-line Ø 10 mm / 1,8 m,
twin insulated, PA-thermo protection meshwork
Dimensions / Weight
274 x 75 x 47 mm (display part) / 515 g
Type
ZAP 350
50-500 V
Article no.
Phase- /
phase sequence
test
Continuity
test
81314


Additional
load
350
W
Direct
analog
indication

Made in Germany
22
Voltage tester up to 1 kV
Prüfball Z AP 350L / 1050L Digital
Electricity meter tester with 350 W or 1050 W load
Technical data
Universal testing device for meter
installation and power suppliers
Five important functions combined in one
device
▪ Electricity meter tester for all directly
measuring electricity meters
▪ Voltage tester 50 ... 500 V
▪ Phase tester
▪ Phase sequence tester
▪ Continuity and self-tester
Exact, precise display
Reliable test by two display systems and
connectible load:
▪ Direct indication by LEDs and LCD
at 50 V
▪ Connection of start-up load
▪ Clear indication of load
▪ High accuracy
1
5
2
4
23
Electricity meter and voltage tester ZAP 350L
according to EN/IEC 61243-3 with special
cable in accordance with BG test report
ZAP 1050L
Nominal voltage
50 ... 500 V AC/DC
Display range
50 ... 500 V AC/DC
Frequency
0...2000 Hz
Voltage indication
Integrated load up to 1050 W for fast
start-up of electricity meters.
ZAP - line
The patented special cable allows
space-saving and water-protected design
▪ Fast start-up through high capacity
▪ No overheating of device or handles
▪ Enclosed casing without ventilation
High-impedance, direct reading:
LED ≥ 50 V ~ and ≥ 120 V + LCD ≥ 50 V backlighted
(accuracy 2,5 % + 5 Digit)
low resistive switched:
additional display symbol for connected load
Continuity
0 ... 1000 kΩ
(resolution 50 kΩ +/- 150 kΩ)
Phase / Phase sequence / Polarity
Capacitive, without accessible electrode
arrows for phase sequence
POL for phase single-pole
tests possible with gloves
voltage type - / ~
Input resistance
3
1.Bargraph
2.Large numerals and symbols for voltage
AC/DC and resistance
3.Light diodes
4.Indication of connected load
5.Arrow for phase sequence
Indication if one test prod is applied to
phase
Direct (high-impedance) approx. 150 - 190 kΩ
switched: (start-up test) 150 Ω 50 Ω
Accessories
Current peak value
Accessories are not included in scope of
delivery
▪ Bag of leather or artificial leather
Keeping the ZAP in the bag avoid
bending the connection lead
▪ Pin prod for tight contacts
(see accessories for Prüfball SPB)
Direct: < 3,5 mA
switched: 1,5 A / 230 V 4,6 A / 230 V
On-time
120 s
Connectible capacity
Approx. 350 W at 230 V approx. 1050 W at 230 V
Overvoltage protection
Automatic switch-off of load at > 260 V
The Prüfball ZAP digital is an
extremely safe testing device for
fast start-up tests at initial operation
of electricity meters, combined with
a high-quality voltage tester.
▪Direct indication of voltages
up to 500 V
▪Connectible load of 350/1050 W for
fast start-up tests
▪Phase, phase sequence and
continuity tester
▪Thermal and overvoltage protection
▪Without battery,
+
Overload protection
Thermo-switch, thermo-point at approx 70°C
Overvoltage category
LCD and LED
CAT IV 500V according to IEC 60664-1 (VDE 0110)
Surge voltage strength
Technology and safety
High-quality elements guarantee operation
and safety under extreme conditions
▪ Solid rubber case,
dust- and waterproof IP 65
▪ Overvoltage protection – CAT IV
▪ Maintenance-free - no battery required
▪ Secure two-hand tripping device for low
resistive checks through special
push button with wide contact gap
in both handles
▪ Thermo-switch to avoid overheating at
multiple use
▪ Voltage monitoring as protection against
mistakes in voltage ranges
(phase/phase) during load tests
flexible
12 kV case insulation to user
8 kV circuit between test prods
Insulation test voltage
6 kV unit inspection of case and line
Operating temperature
-15°C ... + 45°C
Power supply
Maintenance-free - without battery,
test functions voltage, phase sequence is
supplied from the mains, continuity by Li-accu with
automatic charging function
Casing
Unbreakable silicone rubber,
display cover made of indestructible polycarbonate
Protection category
maintenance-free lifelong
IP 65, device can be used in moist environments
Maintenance-free
The display of the voltage is supplied
from the mains when checking.
The additional functions are powered by a
Longlife battery.
Line
Patented thermo-line Ø 10 mm / 1,8 m
Ø 15 mm / 1,8 m
twin insulated, PA-thermo protection meshwork
Dimensions / Weight
274 x 75 x 47 mm (display part) / 510 g
Type
Article no.
Phase- /
phase sequence
test
Continuity
test
Additional
load
ZAP 350L
50-500 V
81315


350
ZAP 1050L
50-500 V
81316


1050
W
W
LCD
display
with value


Made in Germany
720 g
24
Voltage tester up to 1 kV
Adapter and accessories
Accessories Prüfball SPB / Z AP
The Prüfball SPB can be used with adapters, cables and accessories
for various test tasks.
The Prüfball SPB and ZAP is equipped with a thread for fast and safe extension
with test probes.
With the test probes, the Prüfball can be used perfectly and safely in various
applications.
81041 SP 200
Testbox
84311 L-SETR
Test line
Extensions
81029 SPB-S-ADA
Screwable adapter with 4 mm socket
81021 SPB-S20-A
Insertion prod 20 mm
With screwed-on extensions, it is possible to work at a safe distance
from open circuits and current rails in switchgear.
shape of electrodes
Nominal voltage
50 ... 1000 V AC / 1500 V DC
Insulating strength
> 6000 V
Y
i
Bags and storage
81020 SPB-S500-Y 500 mm
Various bags and containers facilitate the transport and protect the
Prüfball SPB and accessories.
81022 SPB-S600-Y 600 mm
81031 S-HUELSE
Plastic sleeve for extension and test probes
81028 SPB-S900-Y 900 mm
Flexible pin prods
With screwed pin prods tight terminal strips or contacts
at test holes can be contacted.
In addition, the bare electrode length is shortened to <4 mm in order to
minimize the risk of short circuits in narrow switchgears.
Bags for every requirement on page 68
Nominal voltage
50 ... 1000 V AC / 1500 V DC
Insulating strength
> 6000 V
81023 SPB-S70
Flexible pin prod 65 mm
Complete accessories list starting on page 66
Made in Germany
25
26
Voltage tester up to 1 kV
27
Technical data
MultiSafe DSP 4
Two-pole voltage tester
MultiSafe DSP 4 / DSP 4-F tested and
certified by VDE in accordance with
EN/IEC 61243-3 (VDE 0682 part 401)
Precise indication up to 1200 V AC / 1500 V DC
Nominal voltage
24 ... 1000 V AC / 1500 V DC
(according to VDE: automatic switch on/over at ≥ 24 V)
Display range
0,01 V ... 1500 V DC
1 V ... 1200 V AC
Frequency
DSP 4-F
with push button F for:
phase sequence tests in ungrounded
mains, frequency measurement or data hold
Many test-functions
Fast and safe measuring and testing of:
▪ Direct and alternating voltage
▪ Resistance / continuity
▪ Polarity
▪ Phase
▪ Phase sequence grounded
DSP 4-F additionally:
▪ Phase sequence test ungrounded
for IT mains
▪ Frequency measurement
Easy operation
DSP 4ST - Slide tip
with adjustable electrode length to
4 mm or 16 mm.
The MultiSafe DSP 4 is a safe
testing device for all applications
in power engineering –
easy handling, precise, reliable.
▪Precise indication of voltage from
1 V up to 1200 V AC
10 mV up to 1500 V DC
Fully automated test procedures obviate
operating errors:
▪ At 24 V the MultiSafe switches on, or
from continuity over to voltage testing
▪ Automatic selection of correct
measurement range
▪ Indication of voltage and polarity
▪ Self-test per keypress
▪ Hold-function
Three readout systems
Unambiguous and rapid recognition of
function and result:
▪ Round red flares for voltage, green
square symbol for resistance and two
red triangles for phase sequence.
▪ The display shows precise values in V
or kΩ as well as voltage type and polarity
▪ An acoustic signal indicates continuity up to 10 kΩ.
15 Hz ... 10 kHz < 500 V, 15 Hz ... 4 kHz > 500 V
Indication of voltage/phase/phase sequence
Highest level of safety
▪ Protective resistors located directly
behind both test electrodes protect user
and device especially against
dangerous voltage peaks and energy
from external sources
▪ Clear LED indication of hazardous
voltages > 50 V AC / 120 V DC,
which works without battery
▪ The MultiSafe has been tested and
certified by VDE
Phase sequence test
▪ Exact phase sequence test in grounded
mains from 165 V up to 1200 V / 50 Hz
by microcontroller analysis.
▪ The phase sequence test is possible with gloves.
DSP 4-F additionally:
▪ New measuring principle for
phase sequence tests works also in
unearthed mains,
applicable for IT mains
Safety accessories
Accessories are not included in scope of
delivery
▪ Pin prod, adapter and extensions
(page 32)
DC: 0,01...8,99/9,0...99,9/100...1500 V(1,5% + 3 D)
AC: 1...99,9/100...1200 V
(1,5% + 3 D)
(TRMS 15...1800 Hz)
15...1200 V (15% + 3 D)
(sineff >1,8...4/10 kHz:)
Indication of resistance/continuity/diodes
Green LED for continuity up to 1999 kΩ and diodes,
LCD 3½-digit for kΩ-measurement value
buzzer ≤ 10 kΩ
Measuring range - resistance
0 ... 1999 kΩ
(5 % + 3 D)
Measuring ranges - frequency
Only DSP 4-F: 15 ... 1999 Hz, 2,00 ... 10,00 kHz
Input resistance
412 kΩ at 50 V / 50 Hz
311 kΩ at 1000 V AC, 720 kΩ at 1000 V DC
protective resistors directly behind both test electrodes
Current peak value
3,2 mA at 1000 V
On-time
30 s
Overvoltage category
CAT IV 600 V / CAT III 1000 V
in accordance with IEC 60664-1 (VDE 0110)
>12 kV case insulation to user
> 8 kV circuit between test prods
Robust design
High-quality elements guarantee function
and safety under extreme conditions:
▪ Impact resistant plastic casing and
break-proof display cover
▪ Dust- and waterproof (IP 65,
approved for operation in outdoor areas)
▪ Spring-mounted test contacts
▪ Twin insulated PUR control cable
Insulation test voltage
6 kV unit inspection of case and line
Operating temperature
-15°C ... + 45°C
Standards
DSP 4/DSP 4-F: EN/IEC 61243-3 (VDE 0682 Teil 401)
DSP 4ST: additionally according to UK HSE GS38
DSP 4UL: UL 61010-1, 3rd Edition
CAN/CSA-C22.2 No. 61010-1, 3rd Edition
(possible with gloves)
continuity tester 1 kΩ up to 2000 kΩ
Power supply
9 V-block IEC 6LR61 / 6LF22 / 6LP3146 energysaving circuit, automatic switch-off after 30 s
without measuring, multi-stage battery indicator
▪Highest degree of safety provided by
Casing
protective resistors in both test prods
ABS, display cover PC impact resistant,
test electrodes spring-mounted
▪Easy operation
EN/IEC 61243-3
CAT IV 600 V
Measuring ranges - voltage
Surge voltage strength
▪Phase and phase sequence tests
large illuminated display
4 LEDs for voltage, continuity, phase sequence
LCD digital indication, backlighted
7-segment display, 2 lines, 0 ... 1999 digit
Type
Article
no.
Phase- / phase
Phase
Continuity
sequence
sequence test for test with
value
IT power grids
test
DSP 4
0,3 - 1200 V AC
0,01 - 1500 V DC
84402
DSP 4-F
0,3 - 1200 V AC
0,01 - 1500 V DC
84403

DSP 4ST
0,3 - 1200 V AC
0,01 - 1500 V DC
84405

DSP 4 FST
0,3 - 1200 V AC
0,01 - 1500 V DC
84406


Additional load
30 mA-RCDtripping
Slide tip
4 / 16
mm
Protection category
IP 65, device can be used in moist environments
Line
PUR sheated cable, 1000 V, 1 m
with protective cap for electrodes

Dimensions / Weight


240 x 62 x 39 mm (display part) / 270 g





28
Voltage tester up to 1 kV
29
Vorab Information - Änderungen vorbehalten
Technical data
MultiSafe DSP 5
Two-pole voltage- and continuity tester
MultiSafe DSP 5 / DSP 5B / DSP 5ST
tested and certified by VDE in accordance with
EN/IEC 61243-3 (VDE 0682 part 401)
Highest precision and safety up to 1200 V AC / 1500 V DC
Nominal voltage
12 ... 1000 V AC / 1200 V DC
DSP 5 / DSP 5ST
12 ... 1000 V AC / 1500 V DC
DSP 5B
(according to VDE: automatic switch on / over >12 V
and addtitional load up to max. 1200 V AC / DC)
Display range
0,01 V ... 1500 V DC
0,10 V ... 1200 V AC
Frequency
15 Hz ... 10 kHz < 500 V,
15 Hz ... 2 kHz > 500 V
NEW
Indication of voltage/phase/phase sequence
Red LED for voltage, green for continuity, yellow for
phase sequence, LC dispaly, two color backlighted
7-segment-letters, 2 lines, 0 ... 1999 Digit
Additional load / RCD-tripping,
backwards
DSP 5ST - Slide tip with adjustable electrode
length 4 mm / 16 mm.
Colour change of the LCD lighting
during voltage
Der MultiSafe DSP 5 is a safe
testing device for all applications in
power engineering - easy handling,
high-precision, multifunctional and reliable.
▪Precise indication of voltage from
100 mV up to 1200 V AC
10 mV up to 1500 V DC
▪ Extended measuring range for
low- and battery-voltage up to 19,99 V
▪Phase, phase sequence tester
(possible with gloves)
▪Fast continuity test
0,01 kΩ up to 1000 kΩ
Many functions
Fast and safe measuring and testing of:
▪ Direct and alternating voltage (TRMS)
▪ Resistance / continuity
▪ Polarity
▪ Phase
▪ Phase sequence grounded
from 165 up to 1200 V / 50 Hz
▪ Phase sequence ungrounded
(IT power grids)
▪ Frequency measurement
▪ Monitored additional load /
RCD-tripping (not DSP 5B)
▪ Additional load for start-up tests of
electronic electricity meters
▪ Front spot point lightning
Easy operation
Fully automated test procedures obviate
operating errors:
▪ The MultiSafe DSP 5 switches on, or
from continuity over to voltage testing
▪ Direct indication of the type of voltage /
polarity / frequency
▪ Automatic range selection
from 0,10 V up to 1500 V
▪ Integrated self-test per keypress
▪ One-hand operation for testing sockets
▪ Integrated flashlight function for working
in any environment
▪ Belt clip for easy transport
Measuring ranges - voltage
Highest level of safety
▪ Large protective resistors protect the
user and device especially against
dangerous voltage peaks and energy
from external sources.
▪ Large two-colour display for hazardous
voltages > 50 V AC / 120 V DC,
and LED-warning which works
without battery
▪ The MultiSafe has been tested and
certified by VDE
Safety accessories
Accessories are not included in scope of
delivery
▪ Pin prods for measuring points that are difficult to reach
▪ Adapter for test lines with 4 mm plug
▪ Extensions for overhead lines
▪Additional load to determine interference
voltages and RCD-tripping (not DSP 5B)
EN/IEC 61243-3
CAT IV 1000 V
Indication of resistance/continuity/diodes
Green LED for continuity up to 1000 kΩ
and diodes, LCD 3½-digit for kΩ-measurement
value, buzzer ≤ 10,00 kΩ
Measuring range - resistance
0,01 ... 1000 kΩ
(5 % + 4 D)
Measuring ranges - frequency
15,0 ... 99,9 Hz / 100 ... 9999 Hz
Input resistance
412 kΩ at 50 V / 50 Hz
200 kΩ at 1000 V AC, 720 kΩ at 1000 V DC
Current peak value
5 mA at 1000 V
direct
< 300 mA at 1000 V switched (not for DSP 5B)
On-time ton / recover-time toff
at 230 V / 400 V
at UN unlimited
2 min ton / 2 min toff
Overvoltage category
CAT IV 1000 V
in accordance with IEC 60664-1 (VDE 0110)
Surge voltage strength
>19,2 kV case insulation to user
>12 kV circuit between test prods
Insulation test voltage
6 kV unit inspection of case and line
Robust design
High-quality elements guarantee function
and safety under extreme conditions:
▪ Impact resistant plastic casing and
break-proof display cover
▪ Dust- and waterproof (IP 65, approved
for operation in outdoor areas)
▪ Tightly integrated test contacts
▪ Twin insulated PUR control cable
Operating temperature
-15°C ... + 55°C
Power supply
2 x 1,5 V AAA energysaving circuit,
automatic switch-off after 30 s without measuring
multi-stage battery indicator
Casing
ABS-PC/ TPE , display cover PC impact resistant,
handgrip to clip in, belt clip
Protection category
Front spot lighting
IP 65, device can be used in moist environments
▪Easy operation,
large illuminated display with
two colour display
DC: 0,01...19,99/20,0...99,9/100...1500 (1,5% + 3 D)
AC: 0,10...19,99/20,0...99,9/100...1200 V
TRMS 15... 500 Hz (1,5% + 3 D)
sineff > 500 Hz (15% + 3 D)
Connection line
PUR sheated cable, 1000 V, 1 m, with protective cap
Type
Article
no.
Phase- / phase
Phase
sequence
sequence test for
IT power grids
test
Continuity
test with
value
Additional load
30 mA-RCDtripping
DSP 5B
0,3 - 1200 V AC
0,01 - 1500 V DC
84502



DSP 5
0,3 - 1200 V AC
0,01 - 1500 V DC
84501




DSP 5ST
0,3 - 1200 V AC
0,01 - 1500 V DC
84503




4 / 16
mm
slide tip
Repeated inspection / calibration
Recommended every 6 years
Dimensions / Weight
275 x 89 x 35 mm (handgrip and display part)
275 x 60 x 35 mm (display part)
270 g

Made in Germany
30
Voltage tester up to 1 kV
Robust design
High-quality elements guarantee function
and safety under extreme conditions:
▪ Impact resistant plastic casing
▪ Dust- and waterproof
(IP 65, approved for operation in
outdoor areas)
▪ Spring-mounted test contacts
▪ Twin insulated PUR control cable
ProfiSafe LSP 4
Compact and maintenance-free voltage tester
Two models to choose
▪ LSP 4B with bargraph in 7 steps
▪ LSP 4L with digital display in
1-Volt steps
Five test functions
Fast and safe testing of:
▪ Direct and alternating current
▪ Continuity
▪ Polarity
▪ Phase
▪ Phase sequence
LSP 4L:
digital indication of 12...690 V
The ProfiSafe LSP 4 is an particularly
managable and safe tester without
battery, maintenance-free and
environmentally friendly
Nominal voltage range
12 ... 690 V AC / DC
Nominal frequency range
0 ... 500 Hz
Display range
7 steps (bargraph)
12, 24, 50, 120, 230, 400, 690 V
DC: 12 ... 690 V (± 3 % + 4 D)
AC: 12 ... 690 V (± 3 % + 4 D)
Continuity
0 ... 1 MΩ
Input resistance
Approx. 167 kΩ AC / DC at 690 V
approx. 200 kΩ AC / DC at 50 V
Current peak value Is
4,2 mA at 690 V AC / DC
On-time
TRon 30 s at 690 V
RToff max. 240 s (recovery time)
Display
Red LED for voltage ≥ 50 V AC / 120 V DC
green LED for continuity 0 ... 1000 kΩ
LCD with backlight
measuring rate 2/s
Clear signals
Unambiguous and rapid recognition:
▪ Red round LED warns against
hazardous voltages
▪ Green square symbol for continuity
▪ Backlighted display for all functions
LSP 4B with bargraph
Two-pole voltage tester ProfiSafe LSP 4B / 4L
tested and certified by VDE in accordance
with EN/IEC 61243-3 (VDE 0682 part 401)
LSP 4B
LSP 4L
Accessories
Accessories are not included in scope of
delivery
▪ Extensions
▪ Flexible pin prods
▪ Adapter
▪ Bags
Highest level of safety
With CAT IV / 600 V, the device is in the
highest overvoltage category, and can be
used in all areas of energy engineering.
The ProfiSafe has been tested and
certified by VDE.
Technical data
Power supply
Maintenance-free – without battery
voltage tests from the mains
functions continuity / phase / phase sequence
by integrated Li-accu
Overvoltage category
Maintenance-free
Lifelong indication of continuity, phase and
phase sequence – function without battery
▪ Voltage tests can always be performed
power supply from the mains
▪ Without battery,
maintenance-free lifelong
environmentally friendly
▪ Power supply for continuity,
phase and phase sequence from
highperformance accu
▪ Accu is charged automatically
during voltage tests
CAT IV 600 V / CAT III 690 V
Surge voltage strength
> 12 kV case insulation to user
> 8 kV circuit between test electrodes
Insulation test voltage
6 kV unit inspection of case and line
Operating temperatures
-15°C ... + 45°C
Casing
Impact resistant, dust proof ABS plastic casing
display cover made of polycarbonate
Protection category
IP 65
Connecting line
PUR sheated cable, 1000 V, 1 m
with protective cap for electrodes
▪Voltage indication by LED
Standards
and backlighted LCD
IEC 61243-3:2009
EN 61243-3:2010
DIN-EN 61243-3:2011
▪Phase, phase sequence
and continuity test
EMV requirements
DIN-EN 61326
▪Reliable phase sequence test
Dimensions / Weigth
by microcontroller analysis,
test possible with gloves
231 x 48 x 37 mm (display part) / 170 g
▪Without battery,
maintenance-free lifelong
Type
EN/IEC 61243-3
CAT IV 600 V
Article no.
Phase- / phase
sequence
test
Continuity
test
LSP 4B
12 - 690 V
84502


LSP 4L
12 - 690 V
84501


Additional load
30 mA-RCDtripping
LCD
bargraph
LCD
value


Made in Germany
31
32
Voltage tester up to 1 kV
Adapter and accessories
Accessories MultiSafe DSP / ProfiSafe LSP
▪ Standard probe
Only attachable DSP-accessories
can be used.
without thread
DSP 4 / DSP 4F / LSP 4
The MultiSafe DSP can be used with adapters, cables and accessories
for various test tasks.
81041 SP 200
▪ Standard probe
Attachable DSP-accessories or
screwable DSP accessories can be used.
▪ Slide-tip probe
Only screwable DSP-accessories
can be used.
with thread set
DSP 4 / DSP 4F / LSP 4
with thead set
DSP 4ST / DSP 4FST / DSP 4UL
Testbox
84311 L-SETR
Test line
84312 DSP-S-ADAS Screwable adapter with 4 mm socket
Extensions
With screwed-on extensions, it is possible to work at a safe distance
from open circuits and current rails in switchgear.
84321 DSP-S20-A
Insertion prod 20 mm screwable
shape of electrodes
Nominal voltage
50 ... 1000 V AC / 1500 V DC
Bags and storage
Insulating strength
> 6000 V
Y
84313 LSP-S500-Y
i
Various bags and containers facilitate the transport and protect the
MultiSafe DSP and accessories.
500 mm attachable
81031 S-HUELSE
Plastic sleeve to storge extensions
84010 DSP-S500-Y 500 mm screwable
84014 DSP-S940-Y 900 mm screwable
Flexible pin prods
With screwed pin prods tight terminal strips or contacts
at test holes can be contacted.
In addition, the bare electrode length is shortened to <4 mm in order to
minimize the risk of short circuits in narrow switchgear.
Bags for every requirement on page 68
Nominal voltage
50 ... 1000 V AC / 1500 V DC
Insulating strength
> 6000 V
84013 DSP-S70
flexible pin prod 58 mm attachable
84318 DSP-S120
flexible pin prod 110 mm screwable
Complete accessories list starting on page 66
Made in Germany
33
34
Voltage tester up to 1 kV
MultiSafe T T 1
Telescope voltage tester for light rail systems
NEW
Application
The MultiSafe TT 1 is a two-pole
telescope voltage tester for voltages up to
1000 V AC / 1500 V DC.
It is particularly suitable to detect quickly
and securely voltage at catenary lines of
light rail systems.
Accessories
Accessories are not included in scope
of delivery
▪ Bag with ring bolt and shoulder belt
▪ Wall holder
▪ Robust case
Technical data
MultiSafe TT 1, telescope voltage tester
for light railway overhead lines
Nominal voltage range
50 ... 1000 V AC / 1500 V DC
Display range
30 ... 1000 V AC / 1500 V DC
Frequency range
0 ... 500 Hz
Max. interference voltage Ut (change green / red)
240 V
Display
1. red LEDs for voltage > Ut
green LED for standby / absence of voltage
2. two-line LCD with backlight for indication of
voltage, frequency, type of voltage and
battery status
3. acoustic signal > Ut
Self-test
Testing function, grounding and protective resistors
Input resistance
311 kΩ
Current peak value
3,2 mA at 1000 V AC/ DC
On-time
15 min
Overvoltage category
CAT IV
bag
wall holder
case
Surge voltage strength
>19,2 kV case insulation to user
> 12 kV circuit between test prod and ground
Operating temperature
Direct indication of voltage on the LCD
and warning by LED and acoustic signal.
Variable
locking
Display unit with
360 ° LED light strip red / green and
two colour LC-display
The MultiSafe DSP TT1 is a safe
equipment for fast voltage testing
at overhead lines of light rail systems.
▪Precise indication of voltage up to
1000 V AC / 1500 V DC
▪Testing height up to 6,2 m
variable height adjustment
▪Highest degree of safety
provided by protective resistors within the
test prod, maximum current below 3,2 mA
▪Easy operation with one single push button,
self-test for testing function, protective
resistors and proper ground connection
▪Interchangeable test line with magnet
–15°C … + 55°C
Power supply
6 x AA 1,5 V
multi-stage battery indicator
Easy operation
Easy test sequence in three steps:
1.Place the contact magnet on the
grounded rail or screw the contact clamp on the rail foot
2.Perform the selftest
3.Pull out the telescope for length and
insert the electrode into the
overhead line.
Three display systems
▪ LEDs red for voltage, green for
standby and absence of voltage
▪ Display for voltage value, frequency
as well as voltage type and polarity
▪ Acoustic signal for voltage > Ut
Robust design
High-quality elements guarantee function
and safety:
▪ 4-part GRP-telescope tube with
variable height adjustment
▪ Display part made of impact resistant
plastic with break-proof display cover
▪ Dust- and waterproof
▪ Solid PUR hose cable with contact
magnet or clamp, easily exchangeable
Protection category
IP 65, device can be used in moist environments
Design
Fast self-test for device function and
contact between terminal and rail
MultiSafe TT 1K - with rail foot clamp
Two-pole voltage tester with connection to
ground by clamp or magnet
• 4-piece telescope test probe,
made of double-walled GRP-tube with moulded
resistor decade approx. 186 kΩ
• Display part made of impact resistant,
dust-proof plastic casing IP 65 with unbreakable
display cover
• 1,8 m 3 m PUR sheated cable with clamp or
magnet
Standards
alternatively:
Display unit, function and test procedur
EN/IEC 61243-3
Extension and telescopic tube in accordance with
EN/IEC 61010-1
Surge voltage strength in accordance with
EN/IEC 60071
Dimensions / Weight
MultiSafe TT 1M - with magnet for rail
1650 x 120 x 110 mm
run-out length up to 5,1 m
device incl. line and magnet 2,3 kg
device incl. clamp for rail foot 2,6 kg
or clamp
Type
Article No.
Earth
contact
TT 1M
50-1000 V
89306
magnet
TT 1K
50-1000 V
89336
rail foot
clamp
Telescope
Self-test
LC display
for voltage
and frequency
For
indoor
installations
For
outdoor
installations








6m
Made in Germany
35
36
High voltage tester up to 36 kV
High voltage tester up to 36 kV AC/DC
Two-pole
Made in Germany
37
38
High voltage tester up to 36 kV
39
Type over view high voltage tester up to 36 kV
MultiSafe HS 5
MultiSafe HS 11
MultiSafe HS 36
MultiSafe T T 3
MultiSafe T T 36
▪Compact high voltage tester
▪Ideal for narrow power stations
▪Voltage tester for AC and DC
▪Universally applicable
▪Ideal for all types of switchgears
▪Voltage tester for AC and DC
▪Wide measuring range
▪Large illuminated LCD
▪Voltage tester for
AC and DC
▪Telescope system from 1 up to 6 m
▪Very versatile
▪Voltage tester for AC and DC
▪Telescope system from 1 up to 6 m / 8 m
▪Wide measuring range
▪Voltage tester for AC and DC
HS 5
Nominal voltage range
Voltage warning LED red / green
LCD-backlighted red / green
HS 5M
HS 5UK
HS 11
HS 11M
HS 11UK
Acoustic voltage warning
Integrated self-test
Frequency indication
TT 3M
TT 3UK
TT 36M
■
TT 36UK
50 - 36 000 V AC
50 - 36 000 V DC
50 - 3 000 V AC
50 - 3 000 V DC
50 - 36 000 V AC
50 - 36 000 V DC
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
6m
For grounded voltages
TT 36K
50 - 11 000 V AC
50 - 16 000 V DC
Telescope / max. test height
For ungrounded voltages
TT 3K
50 - 5 000 V AC
50 - 7 000 V DC
360° LED indication red / green
Voltage indication with value
HS 36
■
■
■
■
■
6m
8m
■
Ground connection by
Magnet
For indoor installations
■
■
■
■
■
■
■
■
■
Battery 9V 6LR61
Battery 9V 6LR61
Battery 6 x AA 1,5V
Battery 6 x AA 1,5V
Battery 6 x AA 1,5V
Universal clamp
Magnet
For outdoor installations
Power supply
Article number
Page
89300
89331
40
89330
89304
89305
42
Universal clamp
89335
Universal clamp
89308
44
Magnet
89307
Clamp
89337
46
TT 36K-8m
Universal clamp
89347
Magnet
89329
Clamp
Universal clamp
89309
89351
48
Clamp
89310
40
High voltage tester up to 36 kV
Robust design
High-quality elements guarantee function
and safety under extreme conditions:
▪ Impact resistant plastic casing with
break-proof display cover
▪ Twin insulated PUR sheated cable
▪ High voltage probes made of glass
fibre-reinforced plastic with moulded
resistor decade
MultiSafe HS 5
Two-pole high voltage tester up to 5 kV AC / 7 kV DC
Technical data
Two-pole high voltage tester
MultiSafe HS 5
Nominal voltage range
50 ... 5000 V AC / 7000 V DC
Display range
6 ... 5000 V AC / 7000 V DC
Frequency range
0 ... 1000 Hz
Input resistance
Types
2,7 MΩ
Current peak value
2,6 mA at 7000 V DC
Surge voltage strength
> 100 kV (test report available)
Indicator group
I and III
Indication of absence of voltage
Max. interference voltage Ut (change green / red)
50 V
Display
Colour change of the display at voltage
The MultiSafe HS 5 is a two-pole
high voltage tester with LED signals and
precise indication of voltage level and
frequency.
▪Precise indication of voltage up to
5 kV AC / 7 kV DC
▪Highest degree of safety provided by
moulded protective resistors within
the GRP-tube
▪Surge voltage strength >100 kV
▪Self-test for checking protective
resistors and function
Application
The MultiSafe HS 5 is a compact two-pole
voltage tester for alternating voltages up
to 5 kV and direct voltages up to 7 kV.
It is particularly suitable to detect voltage
quickly and securely at capacitor banks
and links of converters, etc.
Voltage level, polarity and frequency are
indicated by several systems.
Safety
▪ Surge voltage strength > 100 kV
due to moulded protective resistors
▪ Integrated self-test to test
the protective resistors, function and
connection to earth (for HS 5M / HS 5UK)
▪ Redundate test system with continuous
self-monitoring for indicating the
absence of voltage
HS 5M with magnet and HS 5UK with
universal clamp for fixed connection to
ground potential.
1. Red LEDs for voltage > Ut
green LED for standby / absence of voltage
2. Two-line LCD with backlight white / red for
indication of voltage, frequency, type of voltage
and battery status
3. Acoustic signal > Ut
Measurement ranges / Accuracy
Accessories
Accessories are not included in scope of
delivery
▪ Various test electrodes page 72
Standard electrode-i round for
busbars and test holes
50 … 1000 V DC ± 2,5% + 5 Digits
50 … 1000 V AC ± 5% + 10 Digits
1,01 … 7,00 kV DC ± 2,5% + 5 Digits
1,01 … 5,00 kV AC ± 5% + 10 Digits
Only for indoor installations
Operating temperature
– 15°C … + 55°C
Self-test
i
G
Testing function and protective resistors
obligatory before indication of measurement results
Y
Power supply
9 V-Block IEC 6LR61 / 6LF22 / 6LP3146
alkalimanganese, multi-stage battery indicator
Design
• Two-pole voltage tester with two firmly attached
high-tension probes made of GRP with moulded
resistor decades, approx. 1,35 MΩ each probe
• Impact resistant, dust-proof plastic casing with
unbreakable display cover, protection category
IP 65
• PUR sheated cable, twin insulated
Three display systems
standby and absence of voltage
▪ Display for voltage value, frequency
as well as voltage type and polarity
▪ Acoustic signal for voltage > Ut = 50 V
15 min, Auto-off-function at absence of voltage
Construction
Easy operation
The one-button operation faciliates the
application. The result is clearly indicated
on the display and by LEDs.
▪ LEDs red for voltage, green for
On-time
Bag with shoulder strap
Standards
EN/IEC 61243-2 high voltage tester
EN/IEC 60071 surge voltage strength
further applied standards:
EN/IEC 61010 and EN 50110-1 (VDE 0105-1)
(further details see risk analysis)
Test label
Date of the next examination on the sticker,
repeated inspection at least every 6 years
Dimensions / Weight
Solid case with aluminum frame
550 x 70 x 70 mm / 500 g
Type
Article
no.
Integrated
self-test
Earth
contact
For
grounded
voltage
For
ungrounded
voltage
For
indoor
installations
HS 5
50 - 5 000 V AC
50 - 7 000 V DC
89300

-



HS 5M
50 - 5 000 V AC
50 - 7 000 V DC
89331

Magnet


HS 5UK
50 - 5 000 V AC
50 - 7 000 V DC
89330

Universal
clamp


For
outdoor
installations
Made in Germany
41
42
High voltage tester up to 36 kV
MultiSafe HS 11
Two-pole high voltage tester up to 11 kV AC / 16 kV DC
Application
The MultiSafe HS 11 is a compact two-pole
voltage tester for alternating voltages up
to 11 kV and direct voltages up to 16 kV.
It is particularly suitable to detect voltage
quickly and securely at capacitor banks
and links of converters, etc.
Voltage level, polarity and frequency are
indicated by several systems.
Easy operation
The one-button operation facilitates the
application. The result is clearly indicated
on the display and by LEDs.
Robust design
High-quality elements guarantee function
and safety under extreme conditions:
▪ Impact resistant plastic casing with
break-proof display cover
▪ Dust- and waterproof (IP 65,
approved for operation in outdoor areas)
▪ Twin insulated PUR sheated cable
▪ High voltage probes made of glass
fibre-reinforced plastic with moulded
resistor decade
Technical data
Two-pole high voltage tester
MultiSafe HS 11
Nominal voltage range
50 ... 11000 V AC / 16000 V DC
Display range
30 ... 11000 V AC / 16000 V DC
Frequency range
0 ... 500 Hz
Input resistance
30 MΩ
Current peak value
0,29 mA at 16000 V DC
Surge voltage strength
> 250 kV (Prüfbericht liegt vor)
Indicator group
I and III
Max. interference voltage Ut (change green / red)
50 V
Indication of absence of voltage
Display
Types
1. Red LEDs for voltage > Ut
green LED for standby / absence of voltage
2. Two-line LCD with backlight white / red for
indication of voltage, frequency, type of voltage
and battery status
3. Acoustic signal > Ut
Measurement ranges / Accuracy
Test with HS 11 at 10 kV transformator
Colour change of the display at voltage
Safety
▪ Surge voltage strength > 250 kV
due to moulded protective resistors
▪ Integrated self-test to test
the protective resistors, function and
connection to earth (for HS 11M /
HS 11UK)
▪ Redundate test system with continuous
self-monitoring for indicating the
absence of voltage
50 … 1000 V DC ± 2,5% + 5 Digits
50 … 1000 V AC ± 5% + 10 Digits
1,01 … 16,00 (16,50) kV DC ± 2,5% + 5 Digits
1,01 … 11,00 (12,00) kV AC ± 5% + 10 Digits
On-time
15 min, Auto-off-function at absence of voltage
Construction
For indoor and outdoor installations
IP 65, device can be used in moist environments
Operating temperature
The MultiSafe HS 11 is a two-pole
high voltage tester with LED signals and
precise indication of voltage level and
frequency.
▪Precise indication of voltage up to
11 kV AC / 16 kV DC
Three display-systems
▪ LEDs red for voltage, green for
standby and absence of voltage
▪ Display for voltage value, frequency
as well as voltage type and polarity
▪ Acoustic signal for voltage > Ut = 50 V
Accessories
Accessories are not included in scope of
delivery
▪ Various test electrodes page 72
Standard electrode-i round for
busbars and test holes
▪Highest degree of safety provided by
– 15°C … + 55°C
HS 11M with magnet and HS 11UK with
universal clamp for fixed connection to
ground potential.
Self-test
Testing function and protective resistors
obligatory before indication of measurement results
Power supply
9 V-Block IEC 6LR61 / 6LF22 / 6LP3146
alkalimanganese, multi-stage battery indicator
Design
• Two-pole voltage tester with two firmly attached
high-tension probes made of GRP with moulded
resistor decades, approx. 15 MΩ each probe
• Impact resistant, dust-proof plastic casing with
unbreakable display cover,
protection category IP 65
• PUR sheated cable, twin insulated
• Connection line additionally protected by
currogated tube
Solid case with aluminum frame
moulded protective resistors within
the GRP-tube
Standards
▪Surge voltage strength > 250 kV
▪Self-test for checking protective
i
G
EN/IEC 61243-2 high voltage tester
EN/IEC 60071 surge voltage strength
further applied standards:
EN/IEC 61010 and EN 50110-1 (VDE 0105-1)
(further details see risk analysis)
Y
resistors and function
Bag with shoulder strap and ring bolt
Test label
Date of the next examination on the sticker,
repeated inspection at least every 6 years
Dimensions / Weight
Type
Article
no.
Integrated
self-test
Earth
contact
For
grounded
voltage
For
ungrounded
voltage
For
indoor
installations
For
outdoor
installations
HS 11
50 - 11 000 V AC
50 - 16 000 V DC
89304

-




HS 11M
50 - 11 000 V AC
50 - 16 000 V DC
89305

Magnet



HS 11UK
50 - 11 000 V AC
50 - 16 000 V DC
89335

Universal
clamp



1150 x 200 x 60 mm / 1,0 kg
Length of test probes 675 mm
Made in Germany
43
44
High voltage tester up to 36 kV
MultiSafe HS 36
Compact high voltage tester up to 36 kV AC/DC
Application
The MultiSafe HS 36 is a two-pole
voltage tester for alternating and direct
voltages up to 36 kV against ground.
Safety
▪ Surge voltage strength > 500 kV
due to moulded protective resistors
▪ Integrated self-test to test
the protective resistors, function and
connection to earth
▪ Redundate test system with continuous
self-monitoring for indicating the
absence of voltage
Easy operation
The one-button operation simplifies the
application. The result is clearly indicated
on the display and by LEDs.
Three display-systems
▪ LEDs red for voltage, green for
standby and absence of voltage
▪ Display for voltage value, frequency
as well as voltage type and polarity
▪ Acoustic signal for voltage > Ut
Accessories
Accessories are not included in scope
of delivery
▪ Different test electrodes page 72
I: Standard electrode round
for busbars and test holes
Testing with HS 36 in a 36 kV
distribution panel
Compact - light - dismountable
Design
High-quality elements guarantee function
and safety under extreme conditions:
▪ High voltage probe with moulded
resistor decade made of double-walled
GRP-tube
▪ Dust- and waterproof display part made
of ABS with unbreakable display cover
▪ Twin insulated line with large universal
clamp for secure grounding
▪ Modular design with impact resistant,
glass fibre-reinforced plastic tube,
dismountable ground line and clamp
Technical data
Two-pole high voltage tester
MultiSafe HS 36
Nominal voltage range
50 ... 36000 V AC / DC
Display range
40 ... 36000 V AC / DC
Display
1. red LEDs for voltage > Ut
green LED for standby / absence of voltage
2. two-line LCD with backlight for indication of
voltage, frequency, type of voltage and
battery status
3. acoustic signal > Ut
Indicator group
I and III
Max. interference voltage Ut (change green / red)
1200 V
Measurement ranges / Accuracy
40 … 1000 V AC/DC ± 5% + 10 digits resolution 1 V
1,0 … 9,9 kV AC/DC ± 5% + 10 digits resolution 10 V
10 … 36 kV AC/DC ± 5% + 10 digits resolution 100 V
automatic range switching
Frequency range
0 ... 200 Hz
Input resistance
119 MΩ
Current peak value
< 0,4 mA at 36000 V
On-time
15 min
Self-test
Testing function, grounding and protective resistors
Surge voltage strength
i
G
Y
> 500 kV (test report available)
Construction
For indoor and outdoor installations
IP 65, device can be used in moist environments
Operating temperature
– 15°C … + 55°C
Power supply
6 x AA 1,5 V
Design
• Two-pole voltage tester with fixed connection
to ground
• Screwable two-piece high voltage probe, made
of doublewalled GRP-tube with moulded
resistor decade
• Display part made of impact resistant,
dustproof plastic casing IP 65 with unbreakable
display cover
• 6 m PUR high voltage cable 40 kV with universal
clamp for busbars and fixed ball points up to
Ø 25 mm
Colour change of the 360 ° LED light strip
and the LCD lighting during voltage
Standards
With the MultiSafe HS 36, DC and AC
voltage up to 36 kV against ground can be
tested safely and quickly.
In addition to the voltage level, the frequency
is displayed on the two-line display.
EN/IEC 61243-2 high voltage tester
EN/IEC 60071 surge voltage strength
further applied standards:
EN/IEC 61010 and EN 50110-1 (VDE 0105-1)
(further details see risk analysis)
▪Precise indication of voltages up to
Dimensions / Weight
36 kV AC / DC and frequency 0 - 200 Hz
▪Highest degree of safety provided by
Test label
Date of the next examination on the sticker,
repeated inspection at least every 6 years
1430 x 100 x 100 mm / 2,1 kg
transportation length: dismounted 900 mm
Robust and waterproof hard case
(Accessories are not included in the scope of delivery)
moulded protective resistors within the
double-walled GRP-tube
surge voltage strength > 500 kV
▪Dismountable for easy transport
Type
HS 36
50 - 36 000 V AC
50 - 36 000 V DC
Article
No.
Integrated
self-test
Earth
contact
89308

universal
clamp
For
grounded
voltage

For
ungrounded
voltage
For
indoor
installations
For
outdoor
installations


Made in Germany
45
46
High voltage tester up to 36 kV
MultiSafe T T 3
Telescope voltage tester for catenar y lines up to 3 kV AC/DC
Application
The MultiSafe TT 3 is a two-pole
high voltage tester for alternating and
direct voltages up to 3 kV against ground.
It is particularly suitable for quickly and
reliably determining the voltages between
the overhead line and the rail of railway
systems and voltages in switchgears.
Accessories
Accessories are not included in scope
of delivery
▪ Bag with ring bolt and shoulder belt
▪ Wall holder
▪ Robust case
Technical data
Two-pole high voltage tester
MultiSafe TT 36 Nominal voltage range
AC / DC 50 ... 3000 V Display range
40 ... 3000 V AC / DC Display
1. red LEDs for voltage > Ut
green LED for standby / absense of voltage
2. two-line LCD with backlight for indication of
voltage, frequency, type of voltage and
battery status
3. acoustic signal > Ut
Indicator group
I and III
Max. interference voltage Ut (change green / red)
400 V Measurement ranges / Accuracy
40 … 1000 V AC/DC ± 5% + 10 digits resolution 1 V
1,00 … 3,00 kV AC/DC ± 5% + 10 digits resolution10 V
360 ° LED light strip red / green
automatic range switching
Frequency range
0 ... 200 Hz
Input resistance
Test at overhead line
1664 KΩ
Current peak value
Variable locking
for test heights
up to 6,2 m
Colour change of the display at voltage
< 1,8 mA at 3000 V
Design
High-quality elements guarantee function
and safety under extreme conditions:
▪ Telescopic tube with variable height
adjustment 6,2 m test height
▪ Moulded resistor decade made of
GRP-tube
▪ Dust- and waterproof display part made
of ABS with unbreakable display cover
▪ Twin insulated line with universal
clamp for secure grounding
Bag
Wall holder
Case
Testing function, grounding and protective resistors
Surge voltage strength
> 100 kV (test report available)
Construction
For indoor and outdoor installations
IP 65, device can be used in moist environments
Safety
▪For test heights up to 6,2 m
variable height adjustment
▪Precise indication of voltages up
to 3 kV AC and DC
▪Highest degree of safety provided
by moulded protective resistor in
the GRP-tube,
surge voltage strength > 100 kV
5 min at maximum nominal voltage
Self-test
Operating temperature
▪ Surge voltage strength > 100 kV
With the MultiSafe TT 3, voltages up
to 3 kV against ground can be tested
safely and quickly.
In addition to the voltage level, the
frequency is displayed on the two-line
display.
On-time
due to moulded protective resistors
▪ Integrated self-test to test
the protective resistors, function and
connection to earth
▪ Redundate test system with continuous
self-monitoring for indicating the
absence of voltage
–15°C … + 55°C
Power supply
Fast self-test for device function and
contact between terminal and rail
MultiSafe TT 3K - with rail foot clamp
alternative:
Easy operation
The one-button operation facilitates the
application. The result is clearly indicated
on the display and by LEDs.
Three display-systems
▪ LEDs red for voltage, green for
standby and absence of voltage
▪ Display for voltage value, frequency
as well as voltage type and polarity
▪ Acoustic signal for voltage > Ut
6 x AA 1,5 V
multi-stage battery indicator
Design
• Two-pole voltage tester with connection to
ground by clamp or magnet
• 4-piece telescope high voltage test probe, made
of double-walled GRP-tube with moulded
resistor decade approx. 1540 KΩ • Display part made of impact resistant,
dustproof plastic casing IP 65 with unbreakable
display cover
• 1,8 m PUR high voltage cable with clamp or
magnet
Standards
MultiSafe TT 3M - with magnet for rails
EN/IEC 61243-2 high voltage tester
EN/IEC 60071 surge voltage strength
further applied standards:
EN/IEC 61010 and EN 50110-1 (VDE 0105-1)
(further details see risk analysis)
Test label
Date of the next examination on the sticker
Repeated inspection at least every 6 years
Dimensions / Weight
Type
Article No.
Earth
contact
/ line
TT 3M
50-3 000 V
89307
Magnet
TT 3K
50-3 000 V
89337
Railfoot
clamp
TT 3UK
50-3 000 V
89347
Universal
clamp
Telescope
6m
Self-test
LC display
for voltage
and frequency
For
indoor
installations
For
outdoor
installations












1740 x 120 x 110 mm
run-out length up to 5,2 m
test height up to 6,2 m
device incl. line and magnet 2,8 kg
device incl. clamp for railfoot 3,1kg
Made in Germany
47
48
High voltage tester up to 36 kV
MultiSafe T T 36
Telescope voltage tester for catenar y lines up to 36 kV AC/DC
Application
The MultiSafe TT 36 is a two-pole
voltage tester for alternating and direct
voltages up to 36 kV against ground.
It is particularly suitable for quickly and
reliably determining the voltages between
the overhead line and the rail of railway
systems and voltages in switchgears.
Three display-systems
▪ LEDs red for voltage, green for
standby and absence of voltage
▪ Display for voltage value, frequency
as well as voltage type and polarity
▪ Acoustic signal for voltage > Ut
Technical data
Two-pole high voltage tester
MultiSafe TT 36
Nominal voltage range
AC / DC 50 ... 36000 V
Display range
40 ... 36000 V AC / DC
Display
1. red LEDs for voltage > Ut
green LED for standby / absense of voltage
2. two-line LCD with backlight for indication of
voltage, frequency, type of voltage and
battery status
3. acoustic signal > Ut
Indicator group
I and III
Max. interference voltage Ut (change green / red)
1200 V
Measurement ranges / Accuracy
40 … 1000 V AC/DC ± 5% + 10 digits resolution 1 V
1,00 … 3,00 kV AC/DC ± 5% + 10 digits resolution 10 V
10 … 36 kV AC/DC ± 5% + 10 digits resolution 100 V
automatic range switching
Frequency range
0 ... 200 Hz
Input resistance
52 MΩ
Current peak value
< 0,9 mA at 36000 V
On-time
15 min
at maximum nominal voltage
Self-test
Testing function, grounding and protective resistors
Surge voltage strength
Test at a 36 kV compensation system
Variable locking
for test heights
up to 6 m or 8 m
Colour change of the display at voltage
With the MultiSafe TT 36, voltages up
to 36 kV against ground can be
tested safely and quickly.
In addition to the voltage level, the
frequency is displayed on the two-line
display.
▪For test heights up to
6,2 m or 8,2 m
variable height adjustment
▪Precise indication of voltages up
to 36 kV AC and DC
Design
High-quality elements guarantee function
and safety under extreme conditions:
▪ Telescope tube with variable height
adjustment 6,2 m / 8,2 m test height
▪ Moulded resistor decade made of
GRP-tube
▪ Dust- and waterproof display part made
of ABS with unbreakable display cover
▪ Twin insulated line with universal
clamp for secure grounding
Safety
▪ Surge voltage strength > 250 kV
due to moulded protective resistors
▪ Integrated self-test to test
the protective resistors, function and
connection to earth
▪ Redundate test system with continuous
self-monitoring for indicating the
absence of voltage
▪Highest degree of safety provided
by moulded protective resistor in
the GRP-tube,
surge voltage strength > 250 kV
Type
Article
No.
Earth
contact
/ line
TT 36M
50-36 000 V
89329
magnet
TT 36K
50-36 000 V
89309
railfoot
clamp
TT 36UK
50-36 000 V
89351
universal
clamp
89348
universal
clamp
89310
railfoot
clamp
89349
universal
clamp
TT 36UK-40L
50-36 000 V
TT 36K-8m
50-36 000 V
TT 36UK-8m-40L
50-36 000 V
Telescope
> 250 kV (test report available)
Construction
Test at a rail overhead line
For indoor and outdoor installations
IP 65, device can be used in moist environments
Operating temperature
–15°C … + 55°C
Power supply
6 x AA 1,5 V
multi-stage battery indicator
Design
MultiSafe TT 36UK
Earthing to grounding cable or fixed
ballpoint with universal clamp.
Alternative:
Grounding with magnet or rail foot clamp
Accessories
Accessories are not included in scope
of delivery
▪ Bag with ring bolt and shoulder belt
▪ Wall holder
▪ Robust case
Self-test
LC display
for voltage
and frequency
For
For
indoor
outdoor
installations installations
























6m
• Two-pole voltage tester with connection to
ground by clamp or magnet
• 4-piece telescope high voltage test probe, made
of double-walled GRP-tube with moulded
resistor decade approx. 52 MΩ
• Display part made of impact resistant,
dustproof plastic casing IP 65 with unbreakable
display cover
• 1,8 m PUR high voltage cable with clamp or
magnet
Standards
EN/IEC 61243-2 high voltage tester
EN/IEC 60071 surge voltage strength
further applied standards:
EN/IEC 61010 and EN 50110-1 (VDE 0105-1)
(further details see risk analysis)
Test label
Date of the next examination on the sticker
Repeated inspection at least every 6 years
Dimensions / Weight
1740 x 120 x 110 mm
run-out length up to 5,2 m / 7,2 m (TT36-8m)
test height up to 6,2 m / 8,2 m (TT36-8m)
device incl. line and magnet 2,8 kg
device incl. clamp for railfoot 3,1kg
TT36K-8m 4,2 kg
8m
Made in Germany
49
50
Ex-proof measuring and testing devices
Ex-proof measuring and testing devices
Made in Germany
51
52
Ex-proof measuring and testing devices
Type over view Ex-proof measuring and testing devices
Voltage measurment range
Resistance measurment range
Current measurement range
Temperature measurment range
Application
ΩMegaSafe EP 4
ΩMegaSafe EP 4Ex
ΩMegaSafe ISO 1Ex
VarioSafe EXM 25
▪Compact resistance measuring device
▪Easy handling
▪Versatile accessories
▪Instinsically safe resistance meter
▪Easy handling
▪Battery saving measurement
▪Instinsically safe insulation tester
▪Direct measuring in Ex-areas without
interrupting production processes
▪Intrinsically safe multimeter up to 1000 V ▪Intrinsically safe clamp-on ammeter
▪Automatic measuring range selection ▪Intrinsically safe temperature
▪Versatile accessories
measurement accessory
EP 4
EP 4Ex
ISO 1Ex
EXM 25
only warning for external voltage
only warning for external voltage
only warning for external voltage
0 - 1000 V
0,00 Ω - 1999 kΩ
0,00 Ω - 1999 kΩ
0 kΩ - 1999 GΩ
0,0 Ω - 19,99 MΩ
-
-
-
Monitoring of protective measures
Monitoring of protective measures
Line and resistance measuring device
according to EN / IEC 61557-4
Ex approval
Line and resistance measuring device
according to EN / IEC 61557-4
EX-accessories
MZ 1005
TMZ
-
- 80 - +600 °C
0 mA - 2,00 A
0,0 A - 1000 A
only with TMZ - accessories
-
Intrinsically safe multimeter
Intrinsically safe
clamp-on ammeter
Monitoring of protective measures
High-impedance megohmmeter and
insulation tester
according to EN / IEC 61557-2
Intrinsically safe
Temperature
measurement accessory
■
■
■
■
■
II 2G (chemistry)
I M2 (mining)
I M2 (mining)
II 2G (chemistry)
I M2 (mining)
Ex application group
-
II 2G (chemistry)
II 2G (chemistry)
I M2 (mining)
Ex intrinsically safe in accordance with
-
ib
ib
ib
ib
ib
Gas group
-
IIC
IIB
IIB (up to 1000 V)
IIC (up to 690V)
I Mb
IIC
Temperature class
-
T4
T4
T6
T4
T6
Power supply
Battery 9 V 6LR61
Battery 9 V 6LR61
Duracell
Battery 9 V 6LR61
Duracell
Intrinsically safe Lithium battery
Tietzsch
Battery 9 V 6LR61
Duracell
-
Article number
83302
83301
83310
82026
82319
82318
54
54
56
60
Page
62
53
54
Ex-proof measuring and testing devices
Technical data
Ω MegaSafe EP 4 / EP 4Ex
Compact ear th resistance tester for safe areas & hazardous Ex-areas
Line and resistance measuring device
EP 4 / EP 4Ex according to EN/IEC 61010-1
and EN/IEC 61557-4 (VDE 0413 part 4)
Ex-proof version EP 4Ex additionally
according to DIN EN 60079-0 and 60079-11
1
EC type examination certificate (EP 4Ex)
II 2 G
2
Ex ib IIC T4
ATEX 552826
Measurement ranges
also
10 Ω (Lo-Ω)
100, 2000 Ω
20, 200, 2000 kΩ
3
resolution 0,01 Ω
resolution 0,1 ... 1 Ω
resolution 0,01 ... 1 kΩ
Accuracy
1,5 % + / - 4 digit at 20°C
Three display systems
Unambiguous and rapid recognition of
function, result and danger:
Test lines in accordance with
EN-61010-031 CAT III
Cap removable for CAT II environments
NEW
Faster and more
energy-efficient
The ΩMegaSafe EP 4 is a
manageable resistance measuring
device for fast testing according
to EN/IEC 61557-4 of protective
and grounding lines, equipotential
bonding lines and lines at
lightning arrester.
▪Safe and universal between
Low resistive line tests
Easy testing of resistances in protective
lines and grounding systems, equipotential
bonding lines, shielding etc. in accordance
with EN 61557-4 (VDE 0413-4).
Universal and safe
Measurements between 10 mΩ and 2 MΩ
with extreme safety against external
voltage
▪ Lo-Ω-measurement range up to 10 Ω
with high measurement current 0,2 A
▪ Further measurement ranges up
to 2000 kΩ
▪ Usable in mains up to 400 V
▪ Acoustic and optic warning in case of
external voltage, flashing indication of
voltage value
▪ Robust, manageable casing with
attached test prod for heavy demands,
IP 65
EP 4 for reliable and fast low
resistive tests
Easy handling
▪ Zero balance (compensation) of
measuring line per keypress
▪ Supports several measuring lines with
an impedance up to 3,5 Ω
(approximately 200 m) for quick results
▪ Automatic pole change and storage of
measurement results (can be switched off)
10 mΩ and 2 MΩ
1.Bright LED for external voltage, polarityand Lo-Ω-measurement with 0,2 A
2.Clear display for measurment result and
function with backlight
3.Acoustic warning signal
Accessories
Test lines 73009 and battery are included
in the delivery of the EP 4 (standard
version) or EP 4Ex (Ex-proof version).
0,2 A for Lo-Ω-range up to 10 Ω
▪Fast compensation of
measuring line per keypress
▪Automatic pole change and
10 Ω (Lo-Ω)-range:
100 Ω-range:
further ranges:
200 mA
20 mA
1 µA ... 20 mA
Open-circuit voltage
>4V
Measuring line balance
Automatic 0-balance (CAL) up to 3,5 Ω
Digital indication
2-line LCD-display, 3 ½ digit,
overflow indication via OL
backlight
Voltage indication
Red LED and acustic warning signal
as well as indication of the value in Volt
Overvoltage protection
Up to 400 V reversible via semiconductor and
via special fuse
Overvoltage category
CAT III 300 V / CAT II 600 V
according to EN/IEC 61010-1
Operating temperature
-10°C ... + 50°C
Power supply
Battery 9 V-Block AlMn
EP 4: 9 V-Block IEC 6LR61 / 6LF22 / 6LP3146
(alkaline-manganese) any manufacturer
EP 4Ex: only DAIMON MN1604, 6LR61 (yellow)
or Duracell MN 1604, 6LF22
Plus Power Duralock (black /yellow)
multi-stage battery indicator
automatic switch-off
Casing
Accessories are not included in scope of
delivery
▪ 50 m measuring line on decoiler with
standard socket, not for Ex-areas
▪ 50 m measuring line on wire reel ▪ Contact clamp with standard socket ▪ Leather bags
▪ Sawtooth test prod for rusty and
varnished test sites
▪High measurement current
Measurement current
Made of impact resistant ABS with unbreakable
display cover
Protection category
IP 65, device can be used in moist environments
Dimensions / Weight
60 x 230 x 40 mm
EP 4: 180 g
EP 4Ex: 220 g
storage of measurement results
Test prod for rusty and varnished test sites
Quick compensation of the measuring line
Type
Article no.
Continuity
measurement
Automatic pole
change
Voltage warning
EP 4
83302



EP 4Ex
83301



Ex-proofed

Made in Germany
55
56
Ex-proof measuring and testing devices
Accessories
▪ one test line 84311 600 V CAT III
80 cm with crocodile clip and battery
included in scope of delivery (ISO 1)
▪ two test lines 84311 / 84314
600 V CAT III red and black 80 cm
with crocodile clips and battery
included in scope of delivery
(ISO 1Ex)
further accessories are not included
▪ Leather bags
▪ Attachable test probe
Ω MegaSafe ISO 1 / ISO 1Ex
Compact megohmmeter for safe areas & hazardous Ex-areas
also
Easy insulation tests
In Ex-areas with EN 61557-2
(VDE 0413-2), connectible bleeder test in
accordance with EN 61340.
Universal and safe
Measurements between 10 kΩ and 2 GΩ /
2 TΩ with extreme safety against sparking
▪ Robust, manageable casing with fixed
test prod, IP 65
▪ 7 measurement ranges with automatic
range selection
▪ Acoustic and optic warning in case of
external voltage, flashing indication at
voltages 32 V
▪ Push button for rapid discharge of
capacities
ISO 1 with adjustable probe tip
ISO 1Ex with two test leads
for the fixed connection
The ΩMegaSafe ISO 1Ex is a
compact high-impedance testing
device for insulating resistances
and bleeder resistors in potentially
explosive atmospheres.
Special accessories for measurements
up to 2 TΩ:
Special measuring lines and electrodes are
required for measurements at bleeder and
surface resistances
▪ ISO-TΩ measuring line
▪ Annular electrode in accordance with
EN 61340-5-1 and EN 61340-2-3 for
measurements of surface resistance
and volume resistivity, weight: 0,515 kg
▪ Electrode in accordance with
EN 61340-4-1 and EN 61340-2-3
for measurements of surface and
bleeder resistance, weight: 2,27 kg
Measurement ranges
1,999MΩ
19,99MΩ
199,9MΩ
1,999 GΩ
19,99GΩ
resolution 1 kΩ
resolution 10 kΩ
resolution 100 kΩ
resolution 1 MΩ
resolution 10 MΩ
5% +/- 5D
5% +/- 5D
5% +/- 5D
5% +/- 5D
10% +/- 5D
with selected measurement option TΩ (only ISO 1Ex):
199,9GΩ resolution 100 MΩ 10% +/- 5D
1999 GΩ resolution 1 GΩ
25% +/- 5D
Accuracy
5% +/- 5 Digit bei 20°C
Test voltage/measurement current (ISO 1)
100 V
250 V
500 V
1000 V
1 mA
1 mA
1 mA
1 mA
+/-20 %
+/-20 %
+/-20 %
+/-20 %
Test voltage/measurement current (ISO 1Ex)
64 µA
200 µA
1 mA
+/-20 %
+/-20 %
+/-20 %
Digital indication
2-line LCD-display, 3 ½ digit,
overflow indication via OL
backlight
Voltage indication
Red LED and acustic warning signal
as well as indication of the value in Volt
24 - 400 V AC
15 - 500 V DC
Overvoltage category
CAT IV 600 V
according to EN/IEC 61010-1
Operating temperature
-10°C ... + 50°C
Power supply
Battery 9 V-block AlMn
Daimon MN 1604; 6LR61 or
Duracell MN 1604 Plus Duralock 6LF22
multi-stage battery indicator
automatic switch-off
Check the conductivity of ESD floors
Casing
Made of impact resistant ABS with unbreakable
display cover, antistatic coated
Protection category
100, 250, 500, 1000 V for ISO 1
32, 100, 500 V for ISO 1Ex
discharge of capacities
II 2 G
Ex ib IIBT4 BVS 06 ATEX E130
I M2 (M1) EX ib [ia] I BVS 06 ATEX E130
For rapid discharge of capacities
▪Test voltage
▪Push button for rapid
EC type examination certificate (ISO 1Ex)
Discharge push-button
1 k Ω and 2 TΩ
and integrated voltage
indication up to 500 V
High-impedance megohmmeter
ΩMegaSafe ISO 1 / ISO 1Ex
according to EN/IEC 61010-1 and
EN/IEC 61557-2 (VDE 0413 part 2)
Ex-proof version in accordance with
EN 60079-0 and EN 60079-11
32 V
100 V
500 V
Reliable and fast
Easy handling:
▪ Test voltage selection per push button
▪ Simultaneous indication of test voltage
and resistance value on the two-line
display
▪ Warning against voltages > 32 V and
rapid discharge of capacities per
push button
▪ Fast measurements in GΩ ranges,
measurement option TΩ switchable
(3 additional measurement ranges)
▪Safe and universal between
▪Indication of external voltage
Technical data
IP 65, device can be used in moist environments
Dimensions / Weight
60 x 230 x 40 mm / 220 g
Three readout systems
Unambiguous and rapid recognition of
function, result and danger:
1.LED for external voltage, active testing
and selected test voltage
2.Display for test voltage and measurment
value with backlight
3.Acoustic warning signall
Attachable test probe CAT III
(not suitable for Ex-application)
Type
Article no.
Insulation
test
Testing of leakage
resistors
Voltage warning
ISO 1
83315



ISO 1Ex
83310



Ex-proofed

Made in Germany
57
58
Ex-proof measuring and testing devices
Electrodes
Accessories Ω MegaSafe EP 4 / ISO 1Ex
The ΩMegaSafe EP 4 and ISO 1Ex can be customized with accessories for different measurement tasks.
Long cables extend the test area, special test probes and electrodes facilitate the work.
For testing antistatic floors and surfaces, we offer you a selection of
standard test probes for the ISO 1Ex.
Test lines
For a wide range of applications, measuring cables with a length up to
200 m can be used.
73009
Test line with removable
protection cap for CAT IV
environments
73011
Annular electrode
73012
Electrode for surface
resistance
73013 Tripod electrode for floors
73004
Decoiler with 50 m measuring line
Bags and storage
Test probes and clamps
Various bags and containers facilitate the transport and protect the
EP 4 / EP 4Ex, ISO 1 / ISO 1Ex and accessories.
Probes for painted surfaces and clamps for connection to ground
potential facilitate the work.
Overview of the bags on page 77
73001
Earth clamp
The electrode protection of the EP
must be removed before using test
probes.
73007
Sawtooth
test prod
73008
Attachable
test probe
for ISO 1Ex
Complete accessories list starting on page 75
Made in Germany
59
60
Ex-proof measuring and testing devices
Robust casing
For decades approved in mining
▪ Special casing made of impact resistant
antistatic plastic and unbreakable
display cover
▪ Universal jack with bayonet fastening
for DATA-HOLD test prods and further
accessories
▪ Standard sockets for resistance and
current
▪ LEDs for voltage and resistance
VarioSafe EXM 25
Multimeter for mining and chemical industries
Technical data
Intrinsically safe multimeter VarioSafe EXM 25
tested an certified in accordance with
EN 60079-0 and EN 60079-11
EC type examination certificate
DMT 03 ATEX E 013
II 2G Ex ib T4/T6 Gb and
I M2 Ex ib I Mb
Nominal measurement ranges
usable in electricity networks group
Ex I bis 1(2) kV, Ex IIB and Ex IIC up to 690 V
Direct voltage 1 kV (2 kV – request information)
Red LED from 12 V, LCD 3 1/2-digit:
1, 10, 100, 1000 V (1610 V), ± 1,5% + 3 digit
resolution 0.001 ... 1 V
Alternating voltage 1 kV (2 kV – request information)
Red LED from 12 V, LCD 3 1/2-digit,TRMS;
10, 100, 1000 V (1160 V) resolution 0,01 ... 1 V
±1,5% + 3 digit at 0 ... 100 Hz
±5% + 5 digit at 101 ... 500 Hz
Universal and variable
▪ 5 integrated measurement functions
▪ Illuminated two-line display for voltage,
resistance, current, frequency and
temperature with test attachment
▪ Power supply either from battery
or accu
▪ Multifunctional accessories
The VarioSafe EXM 25 is an
intrinsically safe multimeter for
potentially explosive atmospheres.
▪Universal for resistance,
current, frequency, temperature andvoltage up to 2000 V
▪For intrinsically safe and not
intrinsically safe circuits up to
2000 V according to
ATEX directive 94/9 EG
▪Highest degree of safety
provided by moulded protective
resistors in DATA-HOLD test prods
CAT IV, 1000 V
▪Intrinsically safe source of
energy NiMH-accu or Li-battery
▪Robust casing made of
antistatic plastic
Safe
Voltage tester functions
▪ Moulded resistors directly behind the
test prods guarantee an absolutely safe
voltage testing - CAT IV 1000 V
▪ Approved for intrinsically safe and not
intrinsically safe circuits up to 2000 V
(1000 V standard / 2000 V with
measuring tips SPA-HS2, optional)
▪ Distinctive by separate test prods for
voltage or resistance
▪ Voltage test prods lockable by bayonet
fastenings additional LED signal for
voltage
▪ Moulded safety barrier protects against
voltage up to 1000 V during resistance
measurements
▪ Integrated control of current range
up to 1000 V
Easy operation
Automatic function and integrated safety
against operating errors
▪ Automatic selection of measurement
range
▪ Indication of type of voltage + - ~
▪ Red LED signalises voltage, green LED
indicates continuity
▪ DATA-HOLD push button within the
measuring tip saves the displayed value
▪ Self-test and automatic battery check
▪ Automatic switch-off after 60 sec when
no measurements are taken
Input resistance
2 MΩ distributed to 4 resistances,
moulded into DATA-HOLD test prods
Continuity/resistance
Green LED LCD 3 1/2-digit
200, 2000 Ω
20, 200, 2000 kΩ, 2 MΩ, 20 MΩ ± 1 % + 5 digit,
resolution 0,1Ω ... 10 kΩ
Current
Standard accessories
DATA-HOLD test prods for voltage and
frequency up to 1 kV and standard prods
for resistance/current, as well as an
intrinsically safe energy source, accu
or battery are included in the scope of
delivery.
Accessories / spare parts
The following accessories are not included
in scope of delivery
▪ Ever-ready bag
▪ Plug-in power supply
▪ NiMH accu intrinsically safe T4
▪ Lithium-battery intrinsically safe T6
▪ Temperature measurement accessory,
intrinsically safe, -80°C up to +600°C
▪ Universal sensor Fe-CuNi
▪ Surface sensor Fe-CuNi
▪ High voltage probes up to 2000 Volt (Ex I)
▪ Clamp-on ammeter
for AC/DC up to 1000 A (for Ex I only)
AC/DC 1000 mA, 2 A ± 1 % + 2 digit
resolution 1 ... 10 mA
Current with clamp
AC/DC 100, 1000 A, ± 1,5 % + 2/3 digit
resolution 0,1 ... 1 A
Frequency
200, 2000 Hz ± 1 % + 2 digit, resolution 0,1 ... 1 Hz
10 kHz ± 3 % + 2 digit, resolution 0,01 kHz
Temperature with measurement accessory
-80°C... +150°C ± 1,5 % + 3 digit, resolution 0,1°C
-80°C... +600°C ± 1,5 % + 2 digit, resolution 1°C
Further functions
Automatic selection of measurement range,
indication of function, self-test, automatic switch-off
Power supply
Intrinsically safe energy source, exchangeable
Li-battery (T6) or NiMH accu (T4)
exchange in Ex-areas admitted
Operating temperature
- 10°C ... + 40°C
Casing
PA impact resistant, antistatic,
LCD cover PC unbreakable
Protection category
IP 54, device can be used in moist environments
Dimensions / Weight
85 x 180 x 38 mm / 335 g
Made in Germany
61
62
Ex-proof measuring and testing devices
Accessories Vario Safe EXM
Accessories
Application area of the VarioSafe EXM can be extended by accessories.
These accessories are designed for use in Ex-areas.
With these accessories the application of the VarioSafe EXM 25
is extended.
Measuring lines
Different measuring lines for different voltages extend the application
of the EXM.
82319
Clamp-on ammeter
82318
Temperature measurement
accessory
72010
Voltage test prods
up to 1000 V AC / DC
72011
Voltage test prods
up to 2000 V AC / DC
82010
Test lead for resistance
and current
Batteries and accumulators
Bag
The special accus and Lithium batteries guarantee maximum safety
in Ex-areas.
72025
EXM accu NiMH
72328 Plug-in power supply for
charging EXM accu
72026
EXM Lithium-battery
Complete accessories list starting on page 75
The practical leather carrying case facilitates the use of the EXM 25.
82011
Leather ever-ready bag
Made in Germany
63
64
Article list
65
SPB 500B
81401
SPB 500PR
Prüfball Analog 20...500 V
phase / phase sequence indication,
continuity and self-test, CAT IV 500 V
with additional load and vibration indication
■ ■
SPB 500PRA
Prüfball Analog 20...500 V
phase / phase sequence indication,
continuity and self-test, CAT IV 500 V
with additional load and acoustic signal
■ ■
SPB 1000B
Prüfball analog 20...1000 V
phase / phase sequence indication,
continuity and self-test, CAT IV 1000 V
without additional load
SPB 1000PR
Prüfball analog 20...1000 V
phase / phase sequence indication,
continuity and self-test, CAT IV 1000 V
with additional load and vibration indication
81422
81423
SPB 500L
Prüfball digital 50...500 V
phase / phase sequence indication,
continuity and self-test, CAT IV 500 V
with additional load
SPB 1000L
Prüfball digital 50...1000 V
phase / phase sequence indication,
continuity and self-test, CAT IV 1000 V
with additional load
■ ■
■ ■
■
■
■
81316
81317
81417
ZAP 350L
ZAP 1050L
Electricity meter tester digital 50...500 V
phase / phase sequence indication,
continuity and self-test
350 W additional load, CAT IV 500 V
300 x 200 x 50 mm; 0,635 kg
■ ■
Electricity meter tester digital 50...500 V
phase / phase sequence indication,
continuity and self-test
1050 W additional load, CAT IV 500 V
400 x 175 x 75 mm; 0,950 kg
■ ■
Prüfball digital for flooded cellar rooms with
30 m line and clamp on reel
SPB 500L-HW 50...500 V, integrated self-test
incl. extension SPB-HW-600-i and plasic casing
400 x 400 x 180 mm; 2,460 kg
SET SPB-HW
Floodwater-SET consisting of:
Prüfball SPB 500L-HW
Screw clamp SPB-HW-KLE
Cloth bag SPB-HW-BAG
640 x 290 x 250 mm; 4,320 kg
Maintenance-free thanks to integrated Longlife battery for additional functions
350 W
■ ■
■
SET SPB-UB
■
■
84402
DSP 4
MultiSafe DSP 0... 1200 V / 1500 V DC
phase / phase sequence / continuity / self-test
CAT IV 600 V / CAT III 1000 V
■ ■
DSP 4F
MultiSafe DSP 0... 1200 V / 1500 V DC
phase / phase sequence / continuity / self-test
with phase sequence without ground potential
(IT power grids), CAT IV 600 V / CAT III 1000 V
■ ■
DSP 4ST
MultiSafe DSP 0... 1200 V / 1500 V DC
phase / phase sequence / continuity / self-test
with adjustable electrode length
CAT IV 600 V / CAT III 1000 V
■ ■ ■
DSP 4FST
MultiSafe DSP 0... 1200 V / 1500 V DC
phase / phase sequence / continuity / self-testwith IT phase sequence test and adjustable
electrode, CAT IV 600 V / CAT III 1000 V
■ ■ ■
DSP 4UL
MultiSafe DSP 0... 1200 V / 1500 V DC
phase / phase sequence / continuity / self-test
with CSA / UL-certification a. adjustable electrode
CAT IV 600 V / CAT III 1000 V
■ ■ ■
84404
works without battery
additional load
acoustic voltage indication
adjustable electrode length
phase sequence indication
81390
U-Bahn-SET consisting of:
Prüfball SPB 1000L-UB
magnet SPB-S-MAG
extension SPB-S-250-L
440 x 175 x 75 mm; 0,635 kg
300 x 100 x 50 mm; 0,360 kg
84502
350 W
81315
ZAP 350
■
84406
84501
1050 W
Electricity meter tester ZAP
Floodwater SPB
81314
■
84405
315 x 105 x 60 mm; 0,470 kg
Electricity meter tester analog 20...500 V
phase / phase sequence indication,
continuity and self-test
350 W additional load, CAT IV 300 V
300 x 200 x 50 mm; 0,610 kg
81391
84403
■ ■
Description
Prüfball digital 50...1000 V
optimized for tests on subways / trams,
self-test with green LED for dark environments
SPB 1000L-UB
with phase test, with additional load
CAT IV 1000 V
315 x 105 x 60 mm; 0,470 kg
■ ■ ■
■ ■
■ ■
Type
phase tester single-pole
works without battery
additional load
■ ■
MultiSafe DSP
81404
■
Art. No.
84503
DSP 5B
MultiSafe DSP 0... 1200 V / 1500 V DC
phase / phase sequence / continuity / self-test
with phase sequence without ground potential
(IT power grids), CAT IV 1000 V
■ ■
DSP 5
MultiSafe DSP 0... 1200 V / 1500 V DC
phase / phase sequence / continuity / self-test
with IT-phase sequence test
with additional load
CAT IV 1000 V
■ ■
■
DSP 5ST
MultiSafe DSP 0... 1200 V / 1500 V DC
phase / phase sequence / continuity / self-test
with IT-phase sequence test
with additional load and adjustable electrode
CAT IV 1000 V
■ ■ ■
■
315 x 105 x 60 mm; 0,425 kg
■
■
ProfiSafe LSP
81414
■ ■
Voltage tester up to 1000 V
SPB subway / trams
81411
acoustic voltage indication
Description
Prüfball analog 20...500 V
phase / phase sequence indication,
continuity and self-test, CAT IV 500 V
without additional load
81402
Prüfball SPB
Type
adjustable electrode length
Art. No.
phase sequence indication
Voltage tester up to 1000 V
phase tester single-pole
Article list
85421
LSP 4B
ProfiSafe LSP 12…690 V LCD-7 step bargraph
phase / phase sequence / continuity / self-test
CAT IV 600 V / CAT III 690 V
■ ■
■
85422
LSP 4L
ProfiSafe LSP 12…690 V LCD-value indication
phase / phase sequence / continuity / self-test
CAT IV 600 V / CAT III 690 V
■ ■
■
260 x 75 x 75 mm; 0,230 kg
Made in Germany
Extension 600 mm
insulated stainless steel tube, 1000 V
610 x 20 x 20 mm; 0,080 kg
■ ■
SPB-S900-Y*
Extension 900 mm
light GRP-tube, 1000 V
810 x 20 x 20 mm; 0,105 kg
■ ■
84313
LSP-S500-Y*
Extension 500 mm attachable
insulated stainless steel tube, 1000 V
502 x 20 x 20 mm; 0,075 kg
■
84010
DSP-S500-Y*
Extension 500 mm screwable
insulated stainless steel tube, 1000 V
550 x 30 x 30 mm; 0,090 kg
■ ■ ■
DSP-S940-Y*
Extension 900 mm screwable
light GRP-tube, 1000 V
860 x 30 x 30 mm; 0,090 kg
84014
81031
S-HUELSE
Plastic sleeve for storage of
extensions up to 600 mm
Suitable for a pair of extensions
350 x 45 x 45 mm; 0,070 kg
Adapter
84312
Insertion prod 20 mm screwable
for tests on underground cables, 1000 V
90 x 20 x 20 mm; 0,015 kg
DSP-S20-A
84019
■ ■ ■
■ ■ ■ ■ ■ ■
84023
84024
■ ■ ■
SPB-S70
DSP-S70
Flexible pin prod 3 x 58 mm attachable
for narrow test points
CAT IV 600 V / CAT III 1000 V
145 x 20 x 20 mm; 0,015 kg
■
■ ■ ■
■ ■ ■
DSP-S66
84318
DSP-S120
Flexible pin prod 3 x 110 mm screwable
for narrow test points
CAT IV 600 V / CAT III 1000 V
235 x 30 x 30 mm; 0,040 kg
DSP -G5
Required for the use of screw-on extensions
and adapters
170 x 100 x 30 mm; 0,020 kg
Required for the use of screw-on extensions
and adapters
170 x 100 x 30 mm; 0,020 kg
■
81041
Required for the use of screw-on extensions
and adapters
170 x 100 x 30 mm; 0,020 kg
L-SETR
Test line with two 4 mm sockets, red
including crocodile clip
CAT IV 600 V / CAT III 1000 V
170 x 100 x 30 mm; 0,060 kg
■ ■ ■ ■
■
L-SETS
Test line with two 4 mm sockets, black
including crocodile clip
CAT IV 600 V / CAT III 1000 V
170 x 100 x 30 mm; 0,060 kg
■ ■ ■ ■
■
■ ■ ■ ■
■
■ ■
Testbox
84315
DSP ST-G4
■ ■
Insertion prod 20 mm screwable
for tests on underground cables, 1000 V
140 x 30 x 30 mm; 0,040 kg
Flexible pin prod 3 x 63 mm screwable
for narrow test points
CAT IV 600 V / CAT III 1000 V
180 x 30 x 30 mm; 0,040 kg
DSP -G4
Thread set including glue
for DSP 5 / DSP 5B / DSP 5ST
Flexible pin prod 3 x 63 mm screwable
for narrow test points
CAT IV 600 V / CAT III 1000 V
145 x 20 x 20 mm; 0,015 kg
Pin prod
84013
■ ■ ■
■
Thread set including glue
for DSP 4ST / DSP 4FST / DSP 4UL
84314
81023
DSP-S-ADAS
Screwable adapter with 4 mm socket
suitable for the connection of test leads
CAT IV 600 V / CAT III 1000 V
120 x 30 x 30 mm; 0,035 kg
■ ■
Thread set including glue
for DSP 4 / DSP 4F
84311
84321
■
Test lines
Insertion prod
SPB-S20-A
DSP-S-ADA
Attachable adapter with 4 mm socket
suitable for the connection of test leads
CAT IV 600 V / CAT III 1000 V
70 x 20 x 20 mm; 0,015 kg
■
* Please select the electrode shape when ordering
- Electrode Y for overhead lines (standard)
- Electrode i for busbars and measuring points
81021
84011
SPB-S-ADA
Screwable adapter with 4 mm socket
suitable for the connection of test leads
CAT IV 600 V / CAT III 1000 V
70 x 20 x 20 mm; 0,015 kg
LSP 4B / LSP 4L
SPB-S600-Y*
DSP thread set required
81022
81029
DSP 4ST /DSP 4UL / DSP 5ST
■ ■
Description
DSP 4 / DSP 4F / DSP 5
Extension 500 mm
insulated stainless steel tube, 1000 V
510 x 20 x 20 mm; 0,070 kg
Type
ZAP all types
SPB-S500-Y*
Art. No.
SPB all types
81020
LSP 4B / LSP 4L
DSP thread set required
ZAP all types
Type
81028
Description
SPB all types
Art. No.
67
Accessories voltage tester up to 1000 V
DSP thread set
Extensions
Accessories voltage tester up to 1000 V
DSP 4ST /DSP 4UL / DSP 5ST
Article list
DSP 4 / DSP 4F / DSP 5
66
SP 200
Manageable voltage source
testbox for enhanced self-test
generates 50 - 690 V test voltage
incl. 6 AA batteries,
Not suitable for testing with screwed-on
extension probes.
170 x 75 x 75 mm; 0,380 kg
Made in Germany
81030
SP-LED
Leather bag, for SPB / DSP
with hand strap and shoulder strap
300 x 130 x 60 mm; 0,475 kg
84020
DSP-ETU
Artificial leather case for DSP / LSP
310 x 120 x 30 mm; 0,125 kg
84021
DSP-COR
Cloth bag Cordura for DSP
with belt loop
310 x 160 x 15 mm; 0,075 kg
85320
LSP-COR
Cloth bag Cordura for LSP
with belt loop
295 x 135 x 15 mm; 0,070 kg
81035
SP-KLT-S600
Artifical leather bag for SPB / DSP / LSP
and extensions up to 600 mm
with shoulder strap
650 x 175 x 50 mm; 0,225 kg
81033
Z350-LED
Leather bag for ZAP 350 / SPB-UB
with shoulder strap
300 x 210 x 55 mm; 0,560 kg
81034
Z350-KLT
Artifical leather bag for ZAP 350 / SPB-UB
300 x 210 x 55 mm; 0,560 kg
81037
81039
Z1050-LED
SPB-HW-BAG
Artifical leather bag for ZAP 1050L
350 x 210 x 60 mm; 0,640 kg
■
■ ■
■
■ ■
■ ■
81045
Extension 600 mm
SPB-HW-S600-i insulated stainless steel tube, electrode i
610 x 20 x 20 mm; 0,080 kg
64224
SPB-HW-SPI
Earthing spike, 600 mm
for SPB-HW
610 x 100 x 40 mm; 1,600 kg
64215
SPB-HW-KLE
Screw clamp for earthing on masts
for SPB-HW
250 x 130 x 30 mm; 0,740 kg
■ ■
■
■ ■ ■ ■
■
■
■
■
Demo set for SPB 500L-HW
consisting of:
64225
Box for water,
SPB-HW-DEMO two test electrodes with
RCD-secured connection line
SPB 500L-HW is not included in the demo set
ca. 300 x 500 x 300 mm; 2,000 kg
81090
SPB-S-MAG
Magnet for SPB test electrode
for simple contacting of rails
180 x 110 x 40 mm; 0,125 kg
■ ■
81091
SPB-S-250-L
Extension 250 mm L-shape
insulated stainless steel tube, 1000 V
260 x 60 x 20 mm; 0,040 kg
■ ■
Cloth bag for SPB-HW and accessories
670 x 300 x 30 mm; 1,000 kg
Made in Germany
LSP 4B / LSP 4L
DSP thread set required
DSP 4ST /DSP 4UL / DSP 5ST
DSP 4 / DSP 4F / DSP 5
Description
ZAP all types
Type
SPB all types
LSP 4B / LSP 4L
■
Accessories SPB-HW
SP-KLT
Art. No.
SPB-HW Floodwater demo box
81032
Artifical leather bag for SPB / DSP
with hand strap
300 x 130 x 60 mm; 0,475 kg
DSP thread set required
Description
ZAP all types
Type
69
Accessories voltage tester up to 1000 V
SPB-UB Accessories
Bags
Art. No.
SPB all types
Accessories voltage tester up to 1000 V
DSP 4ST /DSP 4UL / DSP 5ST
Article list
DSP 4 / DSP 4F / DSP 5
68
■ ■ ■
MultiSafe TT 36
■ ■ ■
magnet
89309
89351
89348
■ ■ ■
89349
teleskope-system
for outdoor use
for indoor use
bi-color LCD / LED red / green
■ ■ ■ ■
TT 3K
Telescope voltage tester with clamp and 1,8 m
connection line for one-sided earth connection
50...3000 V AC / DC
test height variable up to 6,2 m
1690 x 120 x 110 mm; 3,100 kg
■
■ ■ ■ ■
TT 3UK
Telescope voltage tester with universalclamp
1,8 m connection line for one-sided earth connec.
50...3000 V AC / DC
test height variable up to 6,2 m
1690 x 120 x 110 mm; 3,510 kg
■
■ ■ ■ ■
TT 36M
Telescope voltage tester with magnet and 1,8 m
connection line for one-sided earth connection
50...36 000 V AC / DC
test height variable up to 6,2 m
1740 x 120 x 110 mm; 2,970 kg
■
■ ■ ■ ■
TT 36K
Telescope voltage tester with clamp and 1,8 m
connection line for one-sided earth connection
50...36 000 V AC / DC
test height variable up to 6,2 m
1740 x 120 x 110 mm; 3,270 kg
■
■ ■ ■ ■
TT 36UK
Telescope voltage tester with universal clamp
1,8 m connection line for one-sided earth connec.
50...36 000 V AC / DC
test height variable up to 6,2 m
1740 x 120 x 110 mm; 3,680 kg
■
■ ■ ■ ■
TT 36UK-40L
Telescope voltage tester with universal clamp
and 6 m-40kV connection line for earth connec.
50...36 000 V AC / DC
test height variable up to 6,2 m
1740 x 120 x 110 mm; 4,310 kg
■
■ ■ ■ ■
TT 36K-8m
Telescope voltage tester with clamp and 1,8 m
connection line for one-sided earth connection
50...36 000 V AC / DC
test height variable up to 8,2 m
1740 x 120 x 110 mm; 4,170 kg
■
■ ■ ■ ■
Telescope voltage tester with universal clamp
and 6 m-40kV connection line for earth connec.
TT 36UK-8m-40L 50...36 000 V AC / DC
test height variable up to 8,2 m
1740 x 120 x 110 mm; 5,210 kg
■
■ ■ ■ ■
■ ■ ■
89310
connection to earth
magnet
■
clamp f. railfoot
HS 36
High voltage tester with universal clamp
and 6 m connection line for one-sided earth
connection, demountable for transport
50...36 000 V AC / DC
with LCD, self-test, frequency indication
electrode i, test electrodes interchangeable
optional additional electrodes
1200 x 320 x 170 mm; 5,200 kg
■
■
magnet
89308
HS 11UK
High voltage tester with universal clamp and
3 m connection line for one-sided earth conne.
50...11 000 V AC / 16 000 V DC
with LCD, self-test, frequency indication
electrode i, test electrodes interchangeable
optional additional electrodes
1180 x 220 x 90 mm; 2,340 kg
■
TT 3M
Telescope voltage tester with magnet and 1,8 m
connection line for one-sided earth connection
50...3000 V AC / DC
test height variable up to 6,2 m
1690 x 120 x 110 mm; 2,800 kg
■
MultiSafe TT 36-8m
MultiSafe HS 36
89335
HS 11M
High voltage tester with magnet and 3 m
connection line for one-sided earth connection
50...11 000 V AC / 16 000 V DC
with LCD, self-test, frequency indication
electrode i, test electrodes interchangeable
optional additional electrodes
1180 x 220 x 90 mm; 1,660 kg
■
universal clamp
89305
HS 11
universal clamp
MultiSafe HS 11
89304
■ ■ ■ ■
clamp f. railfoot
89337
89329
High voltage tester with two test probes
50...11 000 V AC / 16 000 V DC
with LCD, self-test, frequency indication
electrode i, test electrodes interchangeable
optional additional electrodes
1180 x 220 x 90 mm; 1,860 kg
■
universal clamp
■ ■
89347
Suitable for standard oscilloscope with
1Mohm input resistance.
600 x 215 x 85 mm; 1,160 kg
TT 1K
Telescope voltage tester with clamp and 1,8 m
connection line for one-sided earth connection
50...1000 V AC / 1500 V DC
test height variable up to 6,2 m
1640 x 120 x 110 mm; 3,100 kg
magnet
Two-pole high voltage measuring adapter
for oscilloscopes,
ratio 1:500 / 1:1000 up to 5000 V AC / 7000 V DC
with fixed earth connection
■ ■ ■ ■
■ ■
89307
■
■
clamp f. railfoot
■
integrated self-test
teleskope-system
for outdoor use
for indoor use
bi-color LCD / LED red / green
89336
TT 1M
Telescope voltage tester with magnet and 1,8 m
connection line for one-sided earth connection
50...1000 V AC / 1500 V DC
test height variable up to 6,2 m
1640 x 120 x 110 mm; 2,800 kg
universal clamp
MultiSafe TT 1
89306
Description
universal clamp
OSHS5-i
High voltage tester with universal clamp and
3 m connection line for one-sided earth conne.
6...5000 V AC / 7000 V DC
with LCD, self-test, frequency indication
electrode i, test electrodes interchangeable
optional additional electrodes
600 x 215 x 85 mm; 1,400 kg
■ ■
Type
clamp f. railfoot
89400
HS 5UK
High voltage tester with magnet and 3 m
connection line for one-sided earth connection
6...5000 V AC / 7000 V DC
with LCD, self-test, frequency indication
electrode i, test electrodes interchangeable
optional additional electrodes
600 x 215 x 85 mm; 0,740 kg
■
Art. No.
71
universal clamp
MultiSafe OSHS 5
89330
HS 5M
High voltage tester with two test probes
6...5000 V AC / 7000 V DC
with LCD, self-test, frequency indication
electrode i, test electrodes interchangeable
optional additional electrodes
600 x 215 x 85 mm; 1,020 kg
Telescope voltage testers
MultiSafe TT 3
89331
HS 5
Description
magnet
MultiSafe HS 5
89300
Type
clamp
Art. No.
universal clamp
High voltage tester up to 36 kV
connection to earth
Article list
integrated self-test
70
Made in Germany
■
■ ■ ■
84022
HS5-KOF
Solid box for HS 5
635 x 330 x 140 mm; 3,000 kg
HS-KLT
ELEK-GHS15
■ ■ ■
84331
89314
Electrode G for HS 5 / HS 11 / HS 36
for testing busbars,
uncoated length = 15 mm
160 x 100 x 5 mm; 0,005 kg
Artifical leather bag for HS 11
with shoulder strap
120 x 290 x 20 mm; 0,560 kg
■
84330
HS11-KOF
Solid box for HS 11
1250 x 325 x 140 mm; 6,200 kg
89327
Electrode for DSP HS 5 / HS 11
for tests at test holes,
ELEK-S90-HS
insertion depth = 90 mm at d = 8 mm
165 x 25 x 25 mm; 0,040 kg
■
84334
HS36-KOF
Hard-top case for HS 36
with trolley wheels, waterproof
1200 x 440 x 160 mm; 10,860 kg
■
63041
HS36-WAND
Wall holder for HS 36
for fixed mounting including spacers
170 x 100 x 20 mm; 0,100 kg
■
63042
TT-WAND
84332
84336
63051
63052
89325
63031
ELEK-XHB-2
ELEK-TTS
ELEK-TTL
ELEK-Y-L
TT-PUFFER
Leaf spring electrode short for TT 1 / TT 3
for tests on overhead lines or
turned for tests on busbars
160 x 100 x 20 mm; 0,015 kg
■ ■
■ ■
■ ■
Leaf spring electrode long for TT 1 / TT 3 / TT 36
for tests on overhead lines or
turned for tests on busbars
250 x 150 x 20 mm; 0,035 kg
■ ■ ■
v-shaped electrode for TT 1 / TT 3 / TT 36
for tests on overhead lines and busbars
160 x 100 x 25 mm; 0,065 kg
■ ■ ■
Rubber bumper 30 x 25 mm with M8 thread
for TT 1 / TT 3 / TT 36, top and bottom
160 x 100 x 30 mm; 0,030 kg
■ ■ ■
89392
Connection cable
89317
Special-electrode for HS 5 / HS 11
for tests on 4 mm sockets
flexible plug
160 x 25 x 25 mm; 0,040 kg
Bags and cases
ELEK-YHS15
Electrode Y for HS 5 / HS 11 / HS 36
for testing overhead lines,
uncoated length = 15 mm
160 x 100 x 5 mm; 0,005 kg
89393
89394
89395
TT 36
■
■ ■ ■
TT 3
Artifical leather bag for HS 5
with shoulder strap
660 x 210 x 20 mm; 0,230 kg
84333
TT 1
HS5-KLT
HS 36
Type
HS 11 / HS 11M / HS 11UK
Description
HS 5 / HS 5M / HS 5UK
TT 36
TT 3
Art. No.
ELEK-iHS15
89316
Electrodes
Description
73
Electrode i for HS 5 / HS 11 / HS 36
for testing busbars,
uncoated length = 15 mm
160 x 100 x 5 mm; 0,005 kg
89312
Spare parts
Type
TT 1
Art. No.
Accessories high voltage and telescope voltage tester
HS 36
Accessories high voltage and telescope voltage tester
HS 11 / HS 11M / HS 11UK
Article list
HS 5 / HS 5M / HS 5UK
72
Wall holder for TT 1 / TT 3 / TT 36
for fixed mounting
160 x 100 x 30 mm; 0,045 kg
■ ■ ■
TT-KLT
Artifical leather bag for TT 1 / TT 3 / TT 36
with shoulder strap
1780 x 245 x 20 mm; 0,700 kg
■ ■ ■
TT-KOF
Solid box for TT 1 / TT 3 / TT 36
1800 x 270 x 150 mm; 7,200 kg
■ ■ ■
TT-LEI-MAG
Connection cable with magent
1,8 m / 6 kV insulated for TT1 / TT3 / TT36 / HS36
to use on overhead lines up to 36 kV or for in
switchgears up to 6 kV
250 x 150 x 40 mm; 0,240 kg
■ ■ ■ ■
TT-LEI-K
Connection cable with clamp for railfoot
1,8 m / 6 kV insulated for TT1 / TT3 / TT36 / HS36
to use on overhead lines up to 36 kV or for in
switchgears up to 6 kV
330 x 150 x 40 mm; 0,510 kg
■ ■ ■ ■
TT-LEI-UK
Connection cable with universalclamp
1,8 m / 6 kV insulated for TT1 / TT3 / TT36 / HS36
to use on overhead lines up to 36 kV or for in
switchgears up to 6 kV
220 x 150 x 40 mm; 0,920 kg
■ ■ ■ ■
Connection cable with universalclamp
6 m / 40 kV insulated for TT1 / TT3 / TT36 / HS36
TT-LEI-UK-40L to use on overhead lines up to 36 kV or for in
switchgears up to 36 kV
300 x 300 x 50 mm; 1,550 kg
■ ■ ■ ■
Made in Germany
83302
83301
83315
83310
Earth resistance tester / Low-impendance tester
in accordance with EN 61557-4
measuring range 0,01 Ω … 1999 kΩ
including test line
Ex-proofed typed
300 x 100 x 50 mm; 0,370 kg
■
EP 4Ex
ISO 1
Insulation tester / High-impendance tester
in accordance with EN 61557-2
measuring range 1 kΩ ... 20 GΩ
including one test lines and
one crocodile clips
300 x 100 x 50 mm; 0,400 kg
ISO 1Ex
Insulation tester / High-impendance tester
in accordance with EN 61557-2
measuring range 1 kΩ ... 2 TΩ
including two test lines and
two crocodile clips
Ex-proofed typed
300 x 100 x 50 mm; 0,450 kg
EXM 25A
82026
EXM 25LB
Ex-Multimeter with NiMH accu / T4
including test line,
without plug-in power supply NG4
Ex-proofed typed
220 x 210 x 75 mm; 0,645 kg
Ex-Multimeter with Lithium battery / T6
including test line,
without plug-in power supply NG4
Ex-proofed typed
220 x 210 x 75 mm; 0,630 kg
EXM 25
Test line with 4 mm plug
CAT II 1000 V
in pairs red / black
170 x 100 x 30 mm; 0,090 kg
■ ■ ■ ■ ■ ■
L-SETR
Test line with two 4 mm plugs, red
including crocodile clip
CAT IV 600 V / CAT III 1000 V
170 x 100 x 30 mm; 0,060 kg
■ ■ ■ ■ ■ ■
L-SETS
Test line with two 4 mm plugs, black
including crocodile clip
CAT IV 600 V / CAT III 1000 V
170 x 100 x 30 mm; 0,060 kg
■ ■ ■ ■ ■ ■
73010
ISO-TOL
Test line with two 4 mm plugs, black
for teraohm-measuring for high bleeder resistors
CAT IV 600 V / CAT III 1000 V
170 x 100 x 15 mm; 0,030 kg
73006
EP-DH50
Wire reel with 50 m measuring line
with two 4 mm plugs
300 x 150 x 50 mm; 0,670 kg
■ ■ ■ ■ ■
73004
EP-RH50
Decoiler with 50 m measuring line
and 4 mm plug and 4 mm socket
not suitable for Ex-areas!
(only decoiled measuring line in Ex-areas)
200 x 180 x 80 mm; 0,750 kg
■ ■ ■ ■
72010
SPA
Voltage test prods for EXM 24 / 25
for tests in Ex-areas up to 1000 V
CAT IV 1000 V
170 x 90 x 50 mm; 0,105 kg
■ ■
72011
SPA-HS2
Voltage test prods for EXM 25
for tests in Ex-areas up to 2000 V
220 x 90 x 50 mm; 0,150 kg
■ ■
EP-LEI
WID
■
84311
84314
■
Suitable for Ex-areas
■ ■ ■ ■ ■ ■
82010
■
ISO 1Ex
Test line with 4 mm plug,
CAT II, with protective cap CAT III 1000 V,
black
170 x 100 x 30 mm; 0,045 kg
73009
■
Description
ISO 1
Type
EP 4Ex
Art. No.
EP 4
Voltage measurement
■
Suitable for Ex-areas
EP 4
Earth resistance tester / Low-impendance tester
in accordance with EN 61557-4
measuring range 0,01 Ω … 1999 kΩ
including test line
300 x 100 x 50 mm; 0,350 kg
Frequency measurement
Description
Ex-Multimeter
82025
Type
75
Accessories for Ex-measuring and testing devices
Test lines
Insulation tester ISO 1
Earth resistance tester EP 4
Art. No.
Normal resistance measurement
Ex-measuring and testing devices
High resistance resistance measurement
Article list
Low resistance resistance measurement
74
■ ■ ■ ■
■ ■ ■ ■
■ ■ ■
Made in Germany
Earth clamp with 4 mm socket
160 x 150 x 30 mm; 0,065 kg
■ ■
■
EP-EK
73007
EP-SAW
Sawtooth test prod for EP 4, attachable
100 x 170 x 20 mm; 0,040 kg
■ ■
62015
BAT-AIMn
Battery MN 1604 Plus Power Duralock,
Al-Mn-block 9 V black/gold
approved for EP 4Ex / ISO 1Ex / MZ 1005
120 x 85 x 20 mm; 0,050 kg
■ ■ ■ ■ ■
72025
EXM-AK9
EXM accu NiMH, T4
9 V, 170 mAh / 40 h operation
75 x 25 x 35 mm; 0,070 kg
■ ■
72026
EXM-LB3
EXM Lithium battery T6
3,6 V, 2400 mAh / 300 h operation
75 x 25 x 35 mm; 0,055 kg
■ ■
82319
82318
82107
82108
Bags and cases
73001
72328
NG4
Plug-in power supply NG4
for charging the EXM accu NiMH
100 x 80 x 60 mm; 0,280 kg
MZ 1005
Clamp-on ammeter, for EXM 25
1000 A AC / DC,
including battery
220 x 110 x 70 mm; 1,000 kg
■ ■
TMZ 25
Temperature measurement accessory
for EXM 25
-80 ° ... + 600 °C
without sensor
280 x 180 x 50 mm; 0,100 kg
■ ■
Universal sensor, 250 mm
for TMZ 25
600 x 30 x 30 mm; 0,020 kg
■ ■
EXM-TFU
EXM-TFO
Surface sensor, 110 mm
for TMZ 25
600 x 30 x 30 mm; 0,020 kg
■
■ ■
81032
SP-KLT
Artifical leather bag for EP 4
with hand strap
not suitable for Ex-areas!
300 x 130 x 60 mm; 0,475 kg
81030
SP-LED
Leather bag for EP 4 / EP 4Ex / ISO 1Ex
with hand strap and shoulder strap
300 x 130 x 60 mm; 0,475 kg
■ ■ ■ ■ ■
73021
EP-LED
Leather case for EP 4 / EP 4Ex / ISO 1Ex
and accessories
370 x 240 x 120 mm; 1,480 kg
■ ■ ■ ■ ■
82011
EXM-LED
Leather ever-ready bag for EXM
with shoulder strap,
The tester can remain in the bag during
measurement
200 x 180 x 50 mm; 0,370 kg
73008
ISO-PROBE
Attachable test probe for ISO 1Ex, CAT III
not suitable for Ex-areas!
150 x 100 x 20 mm; 0,015 kg
■ ■
ISO-ELR
Annular electrode for surface resistance and
volume resistivity, delivery in solid box with
calibration plate in accordance with
EN 61340-5-1 / 61340-2-3
350 x 315 x 65 mm; 2,300 kg
■ ■ ■
73012
ISO-ELVO
Electrode for surface resistance and volume
resistivity, in accordance with
EN 61340-4-1 / 61340-2-3
180 x 80 x 80 mm; 2,32 kg
■ ■ ■
73013
ISO-3FUSS
Tripod electrode for floors and surfaces in
accordance with EN 1081
240 x 230 x 45 mm; 0,605 kg
■ ■ ■
73011
■ ■ ■ ■
EXM 25
ISO 1Ex
Description
ISO 1
Type
EP 4Ex
Art. No.
EP 4
EXM 25
ISO 1Ex
ISO
Description
EP 4Ex
Type
Accessories for Ex-measuring and testing devices
ISO-electrodes
Accessories
Art. No.
EP 4
Accessories for Ex-measuring and testing devices
77
Suitable for Ex-areas
Article list
Suitable for Ex-areas
76
■ ■ ■
Made in Germany
78
Sales
Inquir y and order
We are available for your inquir y ...
... direct

+49 2333 759 89
Mo. - Thu. 8:00 AM - 4:00 PM
Fr.
8:00 AM - 2:00 PM

+49 2333 752 57
@
[email protected]

Willringhauser Str. 18
58256 Ennepetal
Germany
... on the Internet
www.tietzsch.de
In our online shop you can arrange a selection of products and directly request
an offer.
... or
Contact one of our local electrical
retailer.
You will find the retrailer list on
www.tietzsch.de/kontakt
79
Quality creates safety.
Rudolph Tietzsch GmbH & Co. KG
Willringhauser Straße 18
D-58256 Ennepetal
Fon +49 2333 / 75989
Fax +49 2333 / 75257
[email protected]
www.tietzsch.de