2014 Electronic Products Catalogue

2014 Electronic Products Catalogue
301856 COVER ART.indd 1
10/01/14 12:14 PM
Electronics 2014 Inside cover.pdf 1 19/12/2013 4:30:16 PM
301856 COVER ART.indd 2
10/01/14 12:14 PM
CONTENTS
3 3
WELLER
®
Soldering stations
Stands & accessories
Repair & rework stations
Fume extraction
Soldering tips
WELLER
23-7
28-13
14-16
17-22
23-32
33 33
EREM
®
High precision tweezers
Cutters
Pliers
Pre forming tools
Fibre optic tools
XCELITE
EREM
33-35
36-37
38
38
38
®
Knives
Blades
Allen sets
PC repair tools and kits
For Xcelite® refer to current
Apex Tool Group Hand
Tools Price List for listing of
products available
301856 INSIDE PAGES.indd 1
10/01/14 12:15 PM
TERMS & CONDITIONS OF SALE
The prices shown are recommended and
exclusive of G.S.T. Net prices can be derived
by applying your appropriate discount, unless
otherwise authorised by Apex Tool Group
Pty. Limited, Albury NSW and are subject to
change without notice. All orders are subject
to acceptance by the factory in Albury.
Orders are accepted only on the basis of
prices ruling on the date of shipment, unless
otherwise agreed.
Product Returns
Credit Claim
Postal or freight charges via our specified
carrier both to the factory and on return will be
for the account of Apex Tool Group.
Claims for shortages, breakages, etc., must
be made within 14 days on receipt of goods.
All orders will be shipped CPT Carriage Paid
to destination, or as negotiated.
Small Order Charge
For orders of less than $100.00 excluding
GST an order processing charge of $10.00 +
GST will apply. Back orders and spare parts
are exempt from this condition.
Finish
We reserve the right to furnish, without
notice, whatever finish is available regardless
of catalogue descriptions.
Trading Terms
Payment received within 30 days of the last
day of the month in which the invoice was
raised. Cash Discounts 2% for Payment
by cheque or E.F.T. (exluding credit card)
received within 10 days of the last day of the
month in which the invoice was raised.
Minimum Annual Spend
To maintain an account with Apex Tool Group
Pty. Limited, a minimum annual spend of
$5,000 excluding GST, is required each
year. Should sales fall below this amount in
any one calendar year, you will be given the
opportunity to discuss your situation with
Apex Tool Group and to increase your sales
over the following 6 month period. Should
this not occur, your account will be closed at
Apex’s discretion.
Rebates
All rebates are dependent on the recipients
account being conducted as per our Terms
and Conditions.
Freight
Chargeable freight to the customer will be
prepaid and charged on our invoice.
2
All returns of Apex Tool Group products
should be to the factory, via our specified
carrier.
Apex Tool Group Pty. Limited
519 Nurigong Street
Albury NSW 2640
Goods Returned Under Warranty
Goods Returned for Repair
Postal or freight charges to the factory will be
for customers account and return charges will
be for account of Apex Tool Group.
Goods Returned for Credit
Any Apex Tool Group product may only be
returned with written permission of Apex Tool
Group Albury. All products must be new, of
current design and in a resaleable condition.
Credit will then be issued at the original
purchase price, less a 15% handling service
fee.
Apex Tool Group Pty. Limited
A.B.N. 50 002 965 826
PO Box 366, 519 Nurigong Street
Albury NSW 2640 Australia
(02) 6058 0300, 6021 5511, Fax 6021 7403
Sales (02) 6021 6666
Stock Adjustment Policy
All requests to return merchandise must be
approved by Apex Tool Group. An offsetting
order of equivalent value must accompany
the request for stock adjustment. An offsetting
order must be for standard price listed items
at current prices and standard terms (no
promotions, specials, dating orders, contract
items or merchandisers).
Proof of purchase must be established on all
items.
Apex Tool Group will not accept the return of
a product as part of a stock adjustment return
which was not originally purchased from Apex
Tool Group. The price shown on the Request
for Return must coincide with the price list
in effect at the time of original supply. The
inclusion of a copy of the original Apex Tool
Group invoice on which the item was shipped,
will expedite the processing of the adjustment.
Inventory adjustments will be credited at
the actual cost paid by the distributor as
determined by proof of purchase, going back
one year. A 15% handling service fee will be
assessed.
After authorisation is received, all returns
must be shipped to the Albury factory, freight
prepaid.
All returned products must have been
purchased within the last 6 months prior to
return and be of current design and finish,
in current production, and must be in a
re-saleable condition upon receipt at the
Albury factory. Any returned products which
are not in a re-saleable condition will not be
accepted and the distributor will be notified for
disposition.
Returns will not be allowed for special made
to order items.
Individually packed items must be in the
original factory-sealed package when
returned.
Limited Lifetime Guarantee
Apex Tool Group quality products are
guaranteed against any defect in material
or workmanship. Damage caused by abuse,
improper use or excessive wear is not
covered by this warranty.
This Warranty is provided in addition to other
rights and remedies you have under law.
Our goods come with guarantees that
cannot be excluded under the Australian
Consumer Law. You are entitled to a
replacement or refund for a major failure and
for compensation for any other reasonably
foreseeable loss or damage.
You are also entitled to have the goods
repaired or replaced if the goods fail to be
of acceptable quality and the failure does not
amount to a major failure.
Claims should be returned, with proof of
purchase, to the place of purchase or
returned prepaid to the address below.
Repaired or replacement goods will be
returned at our cost.
Apex Tool Group Pty Limited
519 Nurigong Street, Albury
NSW 2640, AuSTRALIA
Ph: (02) 60580300
apextoolaus@apextoolgroup.com
www.apextoolgroup.com.au
Note: Some of the above items may require a freight lead time. Product depictions are not to scale. Broken shelf packs attract a 5% Surcharge. Prices herein do not include GST.
301856 INSIDE PAGES.indd 2
10/01/14 12:15 PM
301856 INSIDE PAGES.indd 3
10/01/14 12:15 PM
Electronically Controlled Stations
Weller
Description
WES51D
An economical soldering station with high-End
Performance. Ideal for continuous production soldering.
• Analogue temperature control
• Temperature lockout
• Automatic shut off
• Slim comfortable pencil - reduced operator fatigue
• Temperature range 150°C-450°C
• Max. power output 50W
• Assembled in Australia
Soldering station consists of:
• WES51DPU 230V Power Unit
• PES51 50 Watt 24V Pencil
• PH50 Holder
• ETA tip
• Soldering Tips - ET Series available
WESD51DAU
Ideal for production, rework and repair of through hole
SMT boards, some ground planes and multi-layer boards.
• Digital microprocessor temperature control with LED
display
• Wireless temperature lockout tool
• Automatic shut off
• Tip temperature offset
• °C-°F switchable
• Temperature range 150°C-450°C
• Max. power output 50W
• Assembled in Australia
Soldering station consists of:
• WESD51DPU 230V Power Unit
• PES51 50 Watt 24V Pencil
• PH50 Holder
• ETA tip
• Soldering Tips - ET Series available
WD1000AU
A new concept in soldering iron design.
• Digital temperature control
• Temperature lockout
• Automatic shut off
• Unique miniature pencil
• 3 Pre-set temperature buttons
• °C-°F switchable
• Temperature range 50°C-450°C
• Max. power output 80W
• Made in Germany
Soldering station consists of:
• WD1 230V Power Unit
• WP80 80 Watt 24V Pencil
• WDH10 Holder
• LTB tip
• ROHS & WEEE Compliant
WD1AU
Power unit only
WD1000TAU
Soldering Station with Stop Go Stand
4
Material No.
Shelf
Pack
WES51D
10
WESD51DAU
10
WD1000AU
1
ESD SAFE
WD1AU
1
WD1000TAU
1
Note: Some of the above items may require a freight lead time. Product depictions are not to scale. Broken shelf packs attract a 5% Surcharge. Prices herein do not include GST.
301856 INSIDE PAGES.indd 4
10/01/14 12:15 PM
Electronically Controlled Stations (cont’d)
REINSTATED
PRODUCT
Material No.
Shelf
Pack
WD1000MAU
Micro Digital Rework Soldering Station,
• Designed for fine pitch, high density SMT soldering
and rework
• 3 “radio buttons” allows pre-set of frequently used
temp settings
• Setback, lockout, temp. window, F/C switching,
standby, auto-off time
• Large high contrast LCD display displays more
information at a glance
• The heating element is contained in the tip for fast
heat-up
• WMRP Pencil weighs just 75g
• The pencil powers down when placed in the holder to
extend tip life
• The “tip to grip” distance is 45mm, placing you close
to the work
• The antistatic design of the safety rest has got four
different settings
• ESD safe to protect sensitive components
• ROHS & WEEE Compliant
• Max. Power Output 150W; Consists of WMRP 40W
Micro Soldering Pencils with RT3 Tip and WDH50 Holder
WD1000MAU
1
WD1000HPT
The WD 1000hPT station features Weller’s new 120 W
soldering iron, the WP 120. This iron is ideal for soldering
on difficult circuit boards with heat sinks that cause
dissipation in heat transfer. Target applications include
high density circuit boards, High Frequency / Radio
Frequency applications, and solar panel production.
The Weller WD1000hPT station is specifically designed
for soldering operations which need a combination of
high energy and maximum precision.
The WD1000 hPT consists of• The WD120 Soldering Iron XT Series Tips,
refer page 29
• The WD1M Power Unit
• WDH10T Stop + Go Iron Safety Rest
• Power: 160W
WD1000HPTAU
WD1MAU
Power unit only
WD2000MAU
Dual Micro Digital Rework Station
• Use WMRP solder pencil and WMRT desoldering
tweezers simultaneously
• Designed for fine pitch, high density SMT soldering
and rework
• 3 “radio buttons” allows pre-set of frequently used
temp settings
• Setback, lockout, temp. window, F/C switching, standby,
auto-off time
• Large high contrast LCD display displays more
information at a glance
• The “tip to grip” distance of the WMRP pencil is
just 45mm
• WMRT tweezers utilize a tip cartridge that is always
in alignment
• Tools are automatically switched off when placed
in the stands
• ESD safe to protect sensitive components
• ROHS & WEEE Compliant
• Max. Power Output 160W; RoHS & WEEE Compliant;
Consists of WMRP 40W Micro Soldering Pencil with
RT3 Tip and WDH50 Holder, WMRT 80W Micro
Desoldering Tweezers with RTW2 Tip and
WMRTH Holder
WD2MAU
Power unit only
ESD SAFE
1
ESD SAFE
WD1MAU
1
WD2000MAU
1
ESD SAFE
WD2MAU
Note: Some of the above items may require a freight lead time. Product depictions are not to scale. Broken shelf packs attract a 5% Surcharge. Prices herein do not include GST.
301856 INSIDE PAGES.indd 5
Weller
PRODUCT
Description
1
5
10/01/14 12:15 PM
Weller
Electronically Controlled Stations (cont’d)
Description
Material No.
Shelf
Pack
WSD151
Extremely high output soldering station delivering 150
watts
• Digital microprocessor temperature
control with LED display
• Automatic shut off
• Calibration box (WCB1 or WCB2) may be connected
• °C-°F switchable
• Temperature range 50°C-550°C
• Max. power output 150W
• ROHS & WEEE Compliant
• Made in Germany
Soldering station consists of
• PUD151 230V Power Unit
• WSP150 150 Watt 24V Pencil
• KH27 Holder
• LHT-F tip
T0053277599
1
WX1010 Soldering Station
• WX1 Power Unit
• WXP120 soldering tool (120 watt) with XTB tip
• WDH10 safety rest with dry tip cleaner
ESD SAFE
WX1010AU
1
ESD SAFE
WX1 Power Unit only
• 200 Watt rated output
• Robust Touch screen display
• Automatic energy saving mode
• Multi purpose USB port
• Benchtop Controller capability
WX1011 Soldering Station
• WX1 Power Unit
• WXMP micro soldering tool (40 watt) with RT3 tip
• WDH50 safety rest with dry tip cleaner
WX1AU
1
ESD SAFE
WX1011AU
1
ESD SAFE
WX1012 Soldering Station
• WX1 Power Unit
• WXP65 soldering tool (65 watt) with XNT A tip
• WDH10 safety rest with dry tip cleaner
WX1012AU
1
ESD SAFE
WX2020 Soldering Station
• WX2 Power Unit
• 2 x WXP120 soldering tool (120 watt) with XTB tips
• 2 x WDH10 safety rest with dry tip cleaner
WX2020AU
1
ESD SAFE
View video
& brochure on
WX Product Range
at Website
www.weller.de
6
Note: Some of the above items may require a freight lead time. Product depictions are not to scale. Broken shelf packs attract a 5% Surcharge. Prices herein do not include GST.
301856 INSIDE PAGES.indd 6
10/01/14 12:15 PM
Electronically Controlled Stations (cont’d)
Material No.
Shelf
Pack
WX2021 Soldering Station
• WX2 Power Unit
• WXMP micro soldering tool (40 watt) with RT3 tip
• WDH50 safety rest with dry tip cleaner
• WXMT micro soldering tweezers (2 x 40 watt)
with RTW2 tip
• WDH60 safety rest with dry tip cleaner
WX2021AU
1
WX2 Power Unit only
• 240 Watt rated output
• Robust Touch screen display
• Automatic energy saving mode
• Multi purpose USB port
• Benchtop Controller capability
WXD2010 Soldering Station
• WXD2 Power Unit
• WXDP120 desoldering iron
• WDH70 safety rest
Weller
Description
ESD SAFE
WX2AU
1
ESD SAFE
WXD2010AU
1
ESD SAFE
WXD2020 Soldering Station
• WXD2 Power Unit
• WXDP120 desoldering iron with
WDh70 safety rest
• WXP120 soldering iron with
WDh10 safety rest
WXD2 Control Unit
• 230V Power Unit
• Power consumption 200 Watt
• Channels 2
• Interface
• ESD safe
• Backlighting graphic display
• Connectable tools: all WX tools are connectable
The digitally controlled 2-channel soldering and
desoldering station WXD2 was designed for
professional repair work on state-of-the-art electronic
assemblies in the industrial manufacturing, repair
and laboratory sectors.
WXD2020AU
1
ESD SAFE
WXD2AU
1
ESD SAFE
View video
& brochure on
WX Product Range
at Website
www.weller.de
Note: Some of the above items may require a freight lead time. Product depictions are not to scale. Broken shelf packs attract a 5% Surcharge. Prices herein do not include GST.
301856 INSIDE PAGES.indd 7
7
10/01/14 12:15 PM
Tool Selection Chart




WST82

WSB150
WSB80

HAP200

HAP1

DSX120

DSX80
WHPS80
DS80UNC

WTA50
WSD151
WMRT

WMRP


WP200
WP80


WSP150
WP65


WP120
WSP80


PES51



WTCPTD
PRS50

WSL
WTCPT
TC201B
WSD81
Station
TC201
Weller
Tools

WES50D

WES51D

WESD51D

WSD161



WMRS



WD1000AU



WD1000MAU



WD2000MAU



WD1AU




WD1MAU








WMD1




WMD3





WR3M



WR2

















































WD2MAU








































Soldering Tools
Material No.
Shelf
Pack
PES51
1
WP65 Soldering Set
Consists of:
• WP65 tool with XNTA tip + WDH10 support
• Excellent heat transfer producing very
rapid thermal response
• Slim barrel and short tip - grip (32mm)
makes it ideal for precision soldering
on smt boards
• Heat up time approx. 7s. 50°C to 380°C
• Compatible with all stations from 80W
(except WX)
T0052921699
1
WP65 65 Watt Soldering Tool only
T0052921599
1
WP80 80 Watt Soldering Set
• Compatible with WD1 and WD2
Soldering Stations, and WR Rework
Stations
• WP80 offers 80 watts of power
with short tip-to-grip (40 mm)
• Perfect for Lead Free solder
• ESD safe
• ROHS & WEEE Compliant
• See page 18 for LT tips, Accessories
and Spares
Consists of:
• WP80 soldering pencil
• WDH10 support
• See page 18 for LT Tips
T0052918199
1
WP80 Tool only
WP80 Barrel for WP80 Pencil
T0052918099
1
Description
PES51 50 watt soldering iron to suit WES51D and
WESD51D See page 17 for ET tips Ph50 Stand not
included
Refer Hand Tools Price List
8
Note: Some of the above items may require a freight lead time. Product depictions are not to scale. Broken shelf packs attract a 5% Surcharge. Prices herein do not include GST.
301856 INSIDE PAGES.indd 8
10/01/14 12:15 PM
Soldering Tools (cont’d)
Material No.
Shelf
Pack
WP120 Soldering Set
• Powerful heating element with a
replaceable soldering tip
• The rapid transfer of heat into the
soldering tip is quickly and precisely
controlled with sophisticated electronics
• Design copes with big and difficult
solder joints even at barely
accessible places
• Also ideal for HF shield plates or solar
panel manufacturing
• ROHS & WEEE Compliant
Consists of:
• WP120 soldering pencil
• WDH10T Stop + Go Stand
• See page 17 for XT tips
T0052919499
1
WP120 Tool only
T0052919399
1
WSP150 Soldering Set
150 watt soldering pencil for heavy duty
work
• ROHS & WEEE Compliant
See page 20 for LhT tips
Consists of:
• WSP150 Soldering Tool
• WDH30 Stand
T0052918999
1
WSP150 Tool only
T0052917099
1
WP200 Soldering Set
150 watt soldering pencil for heavy duty
work
• ROHS & WEEE Compliant
See page 20 for LhT tips
Consists of:
• WSP150 Soldering Tool
• WDH30 Stand
T0052920099
1
WP200 Tool only
T0052919999
1
DSX80 Desoldering Set
80 Watt Desoldering Pencil
• Temperature range 50°C-450°C
• RPHS & WEEE Compliant
See page 24 for DX tips
Consists of:
• DSX80 Desoldering Tool
• WDH30 Stand
T0051318399
1
DSX80 Tool only
T0051319099
1
DSX120 Desoldering Tool
Temperature range 50°C - 450°C
Power output 120W
Heat-up time 35 sec. (50-380°C)
Tip type XDS Series
Connectable to WR2 and WR3M
T0051319899
1
Weller
PRODUCT
Description
PRODUCT
Desoldering Tools
Note: Some of the above items may require a freight lead time. Product depictions are not to scale. Broken shelf packs attract a 5% Surcharge. Prices herein do not include GST.
301856 INSIDE PAGES.indd 9
9
10/01/14 12:15 PM
Weller
Desoldering Tools (cont’d)
Description
Material No.
Shelf
Pack
WTA-50 SET
The WTA-50 tweezers can be used with all Weller
Temtronic/SL series stations. Dual heating elements with
independent temperature sensors provide the tips with
constant temperature.
Temperature range 150°C - 450°C
Output 2 x 25W
Consists of:
• Desolder Tweezer
• AK51 Support
• Hex Key
Supplied with WT1 tip See page 21 for WT tips
• ROHS & WEEE Compliant
T0053313399
1
WTA50 Tool only
T0051317199
1
HAP1 SET
100 Watt HAP1 Hot Air Pencil & WDH30 Stand.
For both soldering and desoldering of SMD’s.
Temperature range 50°C - 550°C Power absorption
100W
Consists of:
• HAP1 hot air pencil
• WDH30 Safety Rest
• 1.2mm nozzle
• Xcelite Nutdriver P8 MM
See page 25 for nozzles
• ROHS & WEEE Compliant
T0052711899
1
HAP1 Tool only
T0052711599
1
HAP200 SET
Hot Air Pencil set 200W, 24V
The hAP200 provides a directional hot air flow that is
adjustable. Electronic temperature control from 50°C to
550°C. Different nozzles available as accessory. Finger
switch controls the adjustable pump. For WR 3M only.
T0052711799
1
HAP200 Hot Air Pencil
T0052711699
1
HAP200 Nozzle Adapter
See page 25 for Nozzles
T0058761728
1
WMRP Micro Soldering Set
Soldering pencil for RT soldering tips
• ROHS & WEEE Compliant
• 40 watt Micro Soldering Pencil Set with
high speed regulation
See page 20 for RT tips
Consists of:
• WMRP Tool
• WDH50 Stand
T0052919099
1
WMRP Tool only
T0052917199
1
WMRT Micro Desoldering Tweezers with rest for WMRS,
WD 1M, WD 2M
The new WMRT desoldering tweezers enables with its
twin parallel adjusted tiplets a significant precise de- and
soldering of very small SMD components. The high
speed regulation of the stations WMRS, WD 1M, WD 2M
drives this tweezers. Placed in the rest WMRTH the tips
are automatically switched off for increasing endurance.
• ROHS & WEEE Compliant
T0051317399
1
WMRT Tool only
T0051317499
1
Hot Air Tools
PRODUCT
PRODUCT
Micro Tools
PRODUCT
10
Note: Some of the above items may require a freight lead time. Product depictions are not to scale. Broken shelf packs attract a 5% Surcharge. Prices herein do not include GST.
301856 INSIDE PAGES.indd 10
10/01/14 12:15 PM
WX Tools
Material No.
Shelf
Pack
WXP65 Soldering Set
• 65 Watt soldering tool with XNTA tip
• Very fast response for precision soldering
• Very fast response for precision soldering
• WDH10 safety rest with dry tip clearner
T0052921299
1
WXP65 Soldering Tool
T0052921199
1
WXP120 Soldering Set
• 24 volt, 120 Watt soldering tool with XTB tip
• For soldering large components with high heat
demands
• WDH10 safety rest with dry tip cleaner
T0052920299
1
WXP120 Tool only
• 24 volt, 120 Watt soldering tool with XTB tip
• For soldering large components with high heat
demands
T0052920199
1
WXP200 Soldering Set
• 24 volt, 200 Watt soldering tool with XHTD tip
• For soldering very large components or ground planes
• WDH31 safety rest with dry tip cleaner
T0052920699
1
WXP200 Tool only
T0052920599
1
WXMP Soldering Set
• 24 volt, 40 Watt micro soldering tool with RT3 tip
• Extremely rapid response, ideal for working under
a microscope
• WDH50 safety rest with drip tip cleaner
T0052920499
1
WXMP Tool only
T0052920399
1
WXMT Tweezer Set
• 24 volt, 2 x 40 Watt micro soldering tweezer with
RTW2 tip
• Extremely rapid response, ideal for desoldering small
SMD parts
• WDH60 safety rest with dry tip cleaner
T0051317899
1
WXMT Tool only
(Non tip cartridge)
T0051317799
1
WXDP120 Desoldering Set
• Temperature range 50°C - 450°C
• Power consumption 120 W
• Heat-up time 35 sec. (50°C - 350°C)
• Desoldering tips XDS Series
Consists of:
• WXDP120 Desoldering Tool
• WDH70 Stand
T0051320299
1
WXDP120 Tool only
T0051320199
1
WHP200 Infrared under Board heater
The new WhP200 from Weller is a new under board
heater which although small in dimensions is very
powerful. The WhP200 is designed to be used on small
multipayer PCBs to minimise the risk of thermal damage
to boards and to speed up the repair process.
• Universal application
• Fast and efficient heating
• Operating simplicity
• Excellent Price-/Performance ratio
• Voltage: 230 V / 50/60 Hz
• Power: Heat Zone 200 W Medium Wave Infrared
• Safety Class: I
• Regulation: 50°C - 400°C
T0053371599
1
WRK Rework Nozzle Kit
The newly developed, innovative desoldering system
facilitates soldering and desoldering of large SMT
components up to 30 x 30 mm.
The desoldering system can be connected to the
additional vacuum channel (pick up) of the WR 3M.
• 8 Nozzles
• Assorted Vacuum Cups
• 2 Vacuum Rods and Hose
• Stand
T0051515599
1
Weller
PRODUCT
Description
PRODUCT
PRODUCT
PRODUCT
Optional Accessories
Note: Some of the above items may require a freight lead time. Product depictions are not to scale. Broken shelf packs attract a 5% Surcharge. Prices herein do not include GST.
301856 INSIDE PAGES.indd 11
11
10/01/14 12:15 PM
ACCESSORIES
Soldering Pencils, Magnastat temperature controlled, low voltage
Material No.
Shelf
Pack
TC201B
TCP50M
TC201
1
1
1
W60D
W100D
T0056107599
1
1
1
PH1201 Tool Stand for TCP, TC, EC and SP
*For pricing refer to Hand Tools Price List
PH1201
1
PH50 Tool Stand for PES50 and PES51
*For pricing refer to Hand Tools Price List
PH50
1
PH1260 W60D Tool Stand
*For pricing refer to Hand Tools Price List
PH1260
1
PH12100 W100D Tool Stand
*For pricing refer to Hand Tools Price List
PH12100
1
WDH10 Support for WSP80 & WP80
with four different settings
T0051512199
1
WDH10T WP80 Stop-And-Go Stand
T0051516199
1
WDH30T Stop-And-Go Support
T0051516399
1
Weller
Description
*TC201B Magnastat Tool suits WTCPTD 42W 24V
*TCP50M Magnastat Tool 40W 50V
*TC201 Magnastat Tool suits WTCPS/T 40W 25V
*For pricing refer to Hand Tools Price List
Soldering Pencils, temperature controlled, line voltage
*W60D Magnastat Tool
*W100D Magnastat Tool
*W201D Magnastat Tool
60W
100W
200W
See pages 24 & 25 for Tips
*For pricing refer to Hand Tools Price List
W100D
Tool Stands
PH50, PH12100
PH1201, PH1260
WDH10
WDH10T
WDH30T
Tool Stands Chart
TCP
TC201/B
EC1201
PES50
PES51
WSP80
WSP150
WP80
WP120
WMP
WMRP
WTA-50
HAP1
HAP200
DS80UNC
DSX80
W60D
W100D
12
AK51
PH12100
PH1260
WDH10T
WDH50
WDH30
WDH20
WDH10
PH50
Tools
PH1201
STANDS





















Note: Some of the above items may require a freight lead time. Product depictions are not to scale. Broken shelf packs attract a 5% Surcharge. Prices herein do not include GST.
301856 INSIDE PAGES.indd 12
10/01/14 12:15 PM
Soldering Aids
Material No.
Shelf
Pack
ESF-120ESD
Printed circuit board holder
• Adjustable to Eurocard size
• Suitable for holding irregular shaped cards
• Component support
T0051502699
1
Sponge 2 Layers - Pack of 5
70X55X16MM
T0052242099
1
WPB1
1
WDC2 Dry Cleaner Attachment
T0051512599
1
WDC Wire Wool 2 Refills
T0051382499
1
T0053124699
1
WPA2
1
WSTA3
Soldering, hot blow and torch flame facilities.kit includes:
• 1 x soldering tip
• 1 x hot blow tip
• torch ejector tightening bar
• Metal Kit box
See page 32 for tip selection
*For pricing refer to Hand Tools Price List
WSTA3
1
WSTA6
Junior pocket size with auto ignition
• Fitted with pocket clip
• Suitable for soldering and hot blow
applications
• 1 x WPT-01 tip
See page 31 for tip selection
*For pricing refer to Hand Tools Price List
WSTA6
1
WSTA5
Jumbo, (self igniting)
Kit includes:
• Soldering Tip 72-01-02
• Hot Blow Tip 72-01-52
• Metal kit box
See page 31 for tip selection
*For pricing refer to Hand Tools Price List
WSTA5
1
WPB1 Polishing Bar
• Rejuvenates tips without damage to the
plated surface
WDC
Weller
Description
WDC2
Electronic Temperature Measuring Equipment
WTT1
Temperature measurement and calibration.
• Measures temperature without imposing thermal load.
The WTT1 digital temperature measuring system
has been specifically designed for measuring
the temperature of soldering iron tips.
The probe has a double sensor system and internal
heat source. The measured temperature is fed to a
control system that records the flow of heat in the
probe and stabilizes it with the aid of the internal
heat source.
This design ensures that no heat is drawn by the
probe from the object being measured.
Erroneous measurements due to the large thermal
load of the probe are thus prevented.
The measured temperature is indicated on a three-digit
LED display to a resolution of 1°C.
An adjustable preheat temperature ensures a rapid
response even at high temperatures.
Weller® Pyropen
WPA2
Piezo ignition (self) lighting.
Kit includes:
• 1 x WPT-2 soldering tip
• 1 x WHC-52 hot blow tip
• Metal kit box
See page 32 for tip selection
*For pricing refer to Hand Tools Price List
Note: Some of the above items may require a freight lead time. Product depictions are not to scale. Broken shelf packs attract a 5% Surcharge. Prices herein do not include GST.
301856 INSIDE PAGES.indd 13
13
10/01/14 12:15 PM
Repair/Rework Stations
Weller
Description
WR2 Rework Station
• 300 Watt rated output
• Two channel simultaneous operation
• Internal air and vacuum supply
• Will drive regular Weller tools up to 200 watts
• Will not drive micro tools or XT tools
• DH10 safety rest with dry tip cleaner
Material No.
Shelf
Pack
WR2AU
1
ESD SAFE
View brochure
& video at website:
www.weller.de
WR2000A Hot Air Station
• WR2 Rework station
• HAP1 Hot air tool with 3.0mm nozzle
• WDH30 Safety rest with dry tip cleaner
WR2000AAU
1
ESD SAFE
WR2000D Desoldering Station
• WR2 Rework station
• DSX80 Desoldering tool with DSX113HM tip
• WDH30 Safety rest with dry tip cleaner
WR2000DAU
1
ESD SAFE
WR2002 Rework Station
• WR2 Rework station
• WP80 Soldering tool with LTB tip
• WDH10 Safety rest with dry tip cleaner
• DSX80 Desoldering tool with DSX113HM tip
• WDH30 Safety rest with dry tip cleaner
14
WR2002AU
1
ESD SAFE
Note: Some of the above items may require a freight lead time. Product depictions are not to scale. Broken shelf packs attract a 5% Surcharge. Prices herein do not include GST.
301856 INSIDE PAGES.indd 14
10/01/14 12:15 PM
Repair/Rework Stations
Material No.
Shelf
Pack
WR3M
Package includes:
• WR 3M repair station
• Adapter for HAP200 hot-air pencil
• CD with USB software
• USB cable
Technical data:
• Dimensions L x W x H (mm): 237 x 235 x 102
• Weight: approx. 6.7 kg
• Mains supply voltage: 230 V, 50 Hz (120 V, 60 Hz)
• Power consumption: 420 W
• Safety class: I and III, housing antistatic
• Fuse: Overcurrent release 2 A (4 A)
• Temperature control Soldering and
Desoldering iron stepless of channels: 50°C-550°C
• Controllable temperature range is tool-dependent
• Temperature accuracy: ± 9°C
• Temperature stability: ± 2°C
• Pump (periodic duty (30/30) s): Max. vacuum 0.7 bar
• Max. delivery rate 18 l/min
• Hot air max. 15 l/min
• Additional Pump: Max. vacuum 0.5 bar
• Max. delivery rate 1.7 l/min
• Equipotential bonding: Via 3.5 mm pawl socket on
back of device
T0053366699
1
WR3000MAU
Rework Set
Package includes:
• WR3M
• HAP200 Hot-air pencil with WDH30 Safety rest
• DSX80 Desoldering iron with WDH30 Safety rest
• WP80 Soldering iron with WDH10 Stop + go Safety rest
• WVP Vacuum pick up
• WDC2 Dry cleaner
Technical data:
• Dimensions: L x W x H (mm): 237 x 235 x 102
• Weight: approx. 6.7 kg
• Mains supply voltage: 230 V, 50 Hz (120 V, 60 Hz)
• Power consumption: 420 W
• Safety class: I and III, housing antistatic
• Fuse: Overcurrent release 2 A (4 A)
• Temperature control Soldering and
Desoldering iron stepless of channels: 50°C-550°C
• Controllable temperature range is tool-dependent
• Temperature accuracy: ± 9°C
• Temperature stability: ± 2°C
• Pump (periodic duty (30/30) s): Max. vacuum 0.7 bar
• Max. delivery rate 18 l/min
• Hot air max. 15 l/min
• Additional Pump: Max. vacuum 0.5 bar
• Max. delivery rate 1.7 l/min
• Equipotential bonding: Via 3.5 mm pawl socket on
back of device
WR3000MAU
WHA900
hot air station 700W with built-in turbine
Low cost hot air station for less complex repair tasks
and hot air applications suck as shrinking. The in-built
turbine provides hot air and variable temperatures. The
temperature of the hot air is electronically controlled.
• Analogue temperature adjustment
• Temperature range 50°C-550°C
• Air Volume 5-50 l/min (ESD Safe)
• Two rotary potentiometers to set air
temperature and air volume
• Standby and calibration function
• Safety Class I
• ROHS & WEEE Compliant
T0053171699
Weller
View video &
brochure at website:
www.weller.de
Description
ESD SAFE
1
ESD SAFE
Hot Air Station
ESD SAFE
Note: Some of the above items may require a freight lead time. Product depictions are not to scale. Broken shelf packs attract a 5% Surcharge. Prices herein do not include GST.
301856 INSIDE PAGES.indd 15
1
15
10/01/14 12:15 PM
Weller
Repair/Rework BGA/QFP Stations
The new WQB Repair System upgrades the Weller product range in the SMD repair tool sector. A well thought-out design concept combines reliability and maximum
process control with ease of use and technically mature detail solutions. useful accessories increase the possible uses of this repair work station.
On the WQB 3000 the temperature-regulated 2-zone infrared bottom heater provides rapid warm up and homogeneous substrate temperatures. The hot gas top
heater, with digital control electronics for temperature monitoring and regulation of the air flow rate, facilitates the finely metered supply of heat to the components.
A temperature sensor placed directly in the hot gas nozzle efficiently regulates the top heater and thus provides maximum process control.
Large chip removal station with high energy handpiece. Extensive assortment of economically priced nozzles, with custom sizes made to order.
Maximum precision. Maximum flexibility.
Maximum user-friendliness.
Description
Weller’s next-generation repair and rework
station combines a completely new design
with state-of-the-art split optic camera
technology to provide users with absolute
reliability, optimum process control and
enhanced ease of use.
Advanced design for enhanced
precision
The WQB 4000SOPS is modularly
built with a slide platform, advanced
patented systems and materials of the
highest quality to guarantee industrial
reliability and long-lasting durability.
bilities
ome increaues to lead
-friendly
t enable
ncreasingly
.
t Optic
generation
system,
eptional
ework tools
alue for your
Heating from above: selective
and sensitive
The hot gas heater with patented nozzle
system, coupled with digital control elecIt is a comprehensive,
system
tronics for user-friendly
temperature
monitoring and
for the removal and soldering of BGA
regulation
of risk
theofairthermal
flow rate, facilitates
components,
without the
metered
supply
of heat to the
damage tothe
thefinely
component
or circuit
board.
components. A temperature sensor placed
directly in the hot gas nozzle prevents
thermal overload of the component and
efficiently regulates the top heater, providing maximum process control.
Split Optics for perfectly accurate
16
Note: Some of the above
positioning
The new SOPS (Split Optic Positioning
System) with the high-resolution 2 Mpix
CMOS USB 2.0 camera enables accurate
the components follow301856positioning
INSIDEofPAGES.indd
16
ing desoldering. It works with a single
Material No.
Shelf
Pack
T0053370699
1
WQB4000SOPS
Weller’s next-generation repair and rework station combines a completely new
design with state-of-the-art split optic camera technology to provide users with
absolute reliability, optimum process control and enhanced ease of use.
• Advanced design for enhanced precision
Thewas
WQB4000SOPS
is modularly built with a slide platform,
The system
engineered to bring
patented
systems
and materials of the highest quality to
togetheradvanced
a finely tuned
balance
of autoguarantee industrial reliability and long-lasting durability.
mated technology
for component
pick-up
• Heating from
above: selective
and sensitive
and positioning
semi-automated
The hotwith
gas aheater
with patented nozzle system, coupled with
rework cycle
– opening
up new possibilidigital
control electronics
for temperature monitoring and regulation
of the air flow
the finely metered supply of heat to
ties and applications
in rate,
repairfacilitates
and rework.
the components. A temperature sensor placed directly in the hot
gas nozzle prevents thermal overload of the component and
Well considered
detail,
high-precision
efficiently
regulates
the top heater, providing maximum process
results and
an outstanding price-perforcontrol.
mance ratio
promise
make this
new
• Heating
fromtobelow:
rapid
and homogeneous
The Weller
temperature-regulated
two-zone infrared bottom heater
system from
the first choice among
provides
discerning
users. rapid, yet precisely controlled warm-up at homogeneous
substrate temperatures.
• Streamlined technology
The new WQB4000SOPS enables users to work with a standard
PC via a uSB 2.0 port. Additional appliances or interface cards are
not required.
Technical Data
• Monitoring software: comprehensive functions
Dimensions (L x W x h):
The monitoring software determines temperature profiles and
approx. 630 x 630 x 650 mm
facilitates definition of the optimal soldering process.
Dynamic dimensions:
• Teach-in feature: fast, effective parameter identification
Repeatable results can only be achieved by a process cycle that
approx. 1030 x 630 x 650 mm
considers all the parameters of the repair operation. The ‘Teach-in’
Power supply voltage: 230V, 50/60 Hz
feature provides a quick and easy method of determining process
Mains fuse: T10A
cycle parameters and identifying critical points - without the need
Power: 2300W
for in-depth operator knowledge. The software includes a library of
Top heater: 700W
soldering profiles, i.e. general and specific parameters enabling
Bottom heater:
repeatable use. New profiles can be edited easily by the user and
large 1600W (260 x 260) mm
added to the library.
• Perfect component/circuit board alignment
small 400W (120 x 120) mm
With the split optic camera, live images of a component and a
Compressed-air supply:
circuit board can be aligned independently of each other using the
400-600 kPa purified, dry compressed air
x, y and theta axis fine adjustment drives.
Compressed-air converter:
1. Component size & theta axis
vacuum 60 kPa
2. Align y axis
Temperature control:
3. Align x axis
infinitely variable 50°C - 400°C
4. Component aligned!
control precision ± 10°C
• Removal (desoldering) of the defective component
The ability to preheat the circuit board and a temperature/time
Flow control:
controlled process are critical for good reflow of the solder joints.
infinitely variable 5-50 l/min.
At the end of the reflow cycle, to avoid damage to the solder pads,
Air consumption: 60-100 l/min. (4 bar)
a vacuum lift automatically removes the component from the board
Total weight: approx. 40kg
with minimum force and exact temperature control.
• Cleaning of the circuit board
Residual solder should be removed from the board with a
desoldering iron or desolder wick. Residual contaminants can be
removed with a suitable solvent spray.
• Positioning of the new component
The new WQB4000SOPS station’s split optic camera placement
system ensures precise positioning of a wide range of components
- from BGA to fine pitch SMT.
• Component soldering
Reflow of the replaced component is essentially a repeat of the
removal process, without the vacuum lift being initiated at the end
of the profile. An extensive range of hot gas nozzles and adapters
are available to cater for the many body sizes of BGA devices or
QFP and PLCC packages.
Optimized ease of use
Heating• from
below: profiling
Temperature
Everything
about the
WQB 4000SOPS
rapid andAnhomogeneous
eight-step temperature profile enables
soldering
andnew
cooling
that are perfectly
tailored to specific has
requirements.
been engineered and designed for
The temperature-regulated
two-zone
Split Optics
for perfectly
ease of use and superb results – from its
infrared •bottom
heater provides
rapid,accurate positioning
Thecontrolled
new SOPS
(SplitatOptic Positioning
System)
with the highadvanced,
user-friendly
software all the way
yet precisely
warm-up
resolution 2 Mpix CMOS USB 2.0 camera enables accurate
through
to
its
manyItsupportive
details, such
homogeneous
substrate
temperatures.
positioning of the components following desoldering.
works with
as the
feature.
a single camera and two-colour lighting
forSoftStart
exact positioning.
Superb image quality at high dynamics and very low image noise
ensure precise, ergonomic component mounting.
• An ever expanding field of applications
The new WQB4000SOPS is optimally equipped to take on repair
and rework in mobile communications, research and general BGA.
QFP work. Specifically, with PBGA, CBGS, CCGA, CSP’s, Micro
BGA, QFN, PLCC, SOP and PGA components.
1. Components without direct access to the solder joint
2. Leaded components with external solder joints
3. A wide variety of special modules.
View brochure
at website:
www.weller.de
items may require a freight lead time. Product depictions are not to scale. Broken shelf packs attract a 5% Surcharge. Prices herein do not include GST.
10/01/14 12:15 PM
Fume Extraction
Zero-Smog® System
Zero-Smog® System
In many countries legal regulations governing clean air in the work place require that hazardous substances are removed from the air in order to
avoid harmful effects on people and machines.
Weller
Many work environments today, including soldering, adhesives, welding and laser applications, create particles and gases that can be harmful
to the work place and the environment. Most people thought that the move to lead-free soldering would be more nature friendly. In reality leadfree soldering smoke emissions contain more breathable fine dust particles. More and smaller particles are produced due to the higher working
temperatures required and because more flux is used in the soldering process.
It is important to use the correct safety equipment to remove these hazardous substances. Fine particles are more dangerous to inhale than big
particles as they get caught more easily and block the alveoli in the lungs.
Weller Zero-Smog Systems
offer two
solutions®for fume
®
Weller
Zero-Smog
Systems
extraction:
offer two solutions for fume
Systems offer two solutions for fume extraction:
extraction:
® separate these particles
®
To protect the operator it is important to use an extraction system that is able to
and gases and then
re-circulates the cleaned air back into the work place. This saves energy and reduces energy costs.
Weller® Zero-Smog®
Tip Extraction
Tip Extraction
Tip Extraction
Tip Extraction
Tip E
Weller® FE (Fume Extraction) soldering irons have a smoke tube
integrated into the handle. When soldering the tube is positioned
directly above the joint and collects any fumes produced. Fume
extraction attachments can be retro fitted to non fume extraction
Weller® soldering irons.
Well
Tip
have
Whe
Well
abov
have
ced.
Whe
fitted
abov
irons
ced.
fitte
Le
irons
Co
Up
Le
w
Co
Er
Up
w
w
No
Er
M
w
N
M
• Less investment per work place
• Collect pollution direct at source
• Up to 20 collection points
with one system (200 m apart)
• Ergonomic friendly
with easy access to work place
• No noise
• Minimal air movement
For brochure and
product information
refer to website:
www.weller.de
Volume Extraction
Volume Extraction
Volu
Volume Extraction
Volume Extraction
Mor
Volu
exam
sold
Mor
mob
exam
max
sold
mob
La
max
Lo
M
La
Qu
Lo
Ec
M
Re
Q
Ec
Re
More suitable for applications involving, for example, solder baths,
hot air soldering, micro solders and gluing work. Weller® offers
various mobile systems that purify the air at up to a maximum of 8
workplaces.
•
•
•
•
•
•
Larger areas can be covered
Low maintenance
Mobile
Quick & easy installation
Economic for 1 to 8 work places
Remote control
Note: Some of the above items may require a freight lead time. Product depictions are not to scale.
Broken shelf packs attract a 5% Surcharge. Prices herein do not include GST.
301856 INSIDE PAGES.indd 17
17
10/01/14 12:15 PM
Filter Technology
Weller
Filter
Technology
Filter
Technology
Weller® Zero-Smog® Systems are specifically
®
®
®Systems are specifically
Weller
Weller®Zero-Smog
Zero-Smog
Systems
areinspecifically
designed
for continuous
operation
industrial
designed for continuous operation in industrial
designed for continuous
operationatinthe
industrial
environments.
Care and attention
design
environments. Care and attention at the
environments.
Care
and
attention
at
the
design
stage
plus
careful
component
choice
and
a
design stage plus careful component choice
stage
plus careful
component
choice
and given
a
high
manufacturing
process
have
and
aquality
high
quality
manufacturing
process
®
®
® Zero-Smog
Weller
Systems
are specifically
® systems
high given
quality
manufacturing
havea given
Weller
extraction
aprocess
world
wide
extraction
systems
world
have
Weller
® for continuous operation in industrial
designed
wide
reputation
for systems
reliability
and
longevity.
Weller
extraction
world
wide
reputation
for reliability
andalongevity.
Filter Technology
environments.
and attention
at the design
reputation for Care
reliability
and longevity.
®
®
havea athree
three
Weller
®Zero-Smog
® Systemschoice
stage
careful component
and
a
Zero-Smog
Systems have
Wellerplus
stage
filter
system
for removing
®
high
quality
manufacturing
process
given
Zero-Smog
Systems
havesmall
ahave
three
Weller
stage
filter
system® for
removing
small
particles,
® fumes and gases that are produced
Weller
extraction
a world
wide
stage
filter
system
for removing
fumes
andsystems
gases
that
aresmall
produced
inparticles,
different
working
processes:
reputation
for
reliability
andthat
longevity.
particles,
fumes
and processes:
gases
are produced
in
different
working
in different working processes:
Weller® Zero-Smog® Systems have a three
particle
size:system for removing small
stage
filter
particle fumes
size: and gases that are produced
particles,
µm e.g.
viruses processes:
in 0,5
different
working
0,5 µm
5 µm
1. The hazardous substances are efficiently
1.
The
hazardous
substances
areefficiently
1. captured
The hazardous
by thesubstances
nozzle andare
are
absorbed
efficiently captured by the nozzle and
captured
by the nozzle and are absorbed
into
the filter.
are absorbed into the filter.
into theparticles
filter. get
. Bigger
2.
Bigger particles
get caught
caughtin
inthe
theprepre. filter
Bigger
particles
caughtget
in the
pre-in
and
smaller
particles
caught
filter
and
smallerget
particles
get
caught
1. The
hazardous
substances
are
efficiently
filter
and
smaller
particles
getParticulate
caughtAir)
in
the
HEPA
(High
Efficiency
Particulate
in
the
HEPA
(High
Efficiency
captured
the Efficiency
nozzle andParticulate
are absorbed
Air)
filter.by
the HEPA
(High
Air)
filter.
3.
The
Wide
BandGas
GasFilter
Filterremoves
removes
the filter.
filter.
. into
The
Wide
Band
fumes
and
adhesives.
.
Bigger
particles
get
caught
in the pre. fumes
The Wide
Gas Filter removes
andBand
adhesives.
filter
particles get caught in
fumesand
andsmaller
adhesives.
5 µm
100 µm
10 µm
100 µm
Endfilter.
product – clean air – is re-circulated into
the
workplace.
.
Wide Band Gas Filter removes
theThe
workplace.
fumes and adhesives.
e.g. bacteria, pigments
e.g. fog, hair
e.g. fibres, pollen
e.g. fog, hair
F7
H12
H13
F5
F7
H12
H13
Filter Class:
Filter
Class
F5,e.g.
F7:fog,
Finehair
dust filter as per EN 779
100
µm
Filter Class F5, F7: Fine dust filter as per EN 779
F5,
F7: Fine
dust
filterENas1822
per
779(High
Filter
Filter Class
According
HEPA
Efficiency
Filter
ClassH12/H13:
H12/H13:
According
ENEN
1822
HEPA
(High Particulate
EfficiencyAir)
Particulate
Air) Filter
Filter Class H12/H13: According EN 1822 HEPA (High Efficiency Particulate Air) Filter
F5
F7
H12
H13
Filter Class:
Filter Process
Filter Process
Filter Class F5, F7: Fine dust filter as per EN 779
WFE, WFE P
WFE, WFE P
Filter Process
.+.
.+.WFE P
WFE,
.+.
1.
1.
1.
filter drawings not true to original
filter drawings not true to original
filter drawings not true to original
18
H12 / H13
F7
filter for
clean rooms
1000
– 100
for
applications
with high
1000
– 100
flux content
H12 / H13
filter for clean rooms
1000 – 100
90
100
80
90
70
80
medium
filtration efficiency Em %
60
against
particle size 0,12 µm:
70
50
60
100
40
50
90
30
40
80
20
30
70
10
20
60
10
50
Filter Class:
F5
F7
40
Filter Class:
F5
F7
30
20
10
Filter Class:
WFE X
WFE X
WFE 0D, WFE S,
0D,
WFE8S,
S,
WFE S,
WFE
S, WFE
WFE ES,
WFE8S,
CS
WFE ES, WFE CS
WFE X
WFE 0D, WFE S,
1. S, WFE 8S,
WFE
1. ES, WFE CS
WFE
Filter Class H12/H13: According EN 1822 HEPA (High Efficiency Particulate Air) Filter
Filter Process
for applications with high
for applications
with high
flux
content
Recommended
Application
flux content
for
filterstandard
for cleanapplications
rooms
medium filtration efficiency Em %
e.g. viruses
F5
F7
F7
Filter Class
FH12
5 / H13
against
0,12 µm:Em %
mediumparticle
filtration
efficiency
End product – clean air – is re-circulated
intosize
against particle size 0,12 µm:
100
the workplace.
e.g. viruses
e.g. bacteria, pigments
Filter Class:
Recommended Application
Recommended
Application
for
standard applications
for standard applications
End product – clean air – is re-circulated into
HEPA–(High
Particulate
Endthe
product
clean Efficiency
air – is re-circulated
intoAir)
the
workplace.
5 µm e.g. bacteria, pigments
10 µm size:
e.g. fibres, pollen
particle
10 µm e.g. fibres, pollen
0,5 µm
Filter Class
FFilter
5 Class
F5
. or .
. or .
1.
. or .
. or .
. or .
. or .
F5
H12
H13
H12
H13
1. Fine dust filter
F7
H12
For
standard
withH13
a small amount of flux
1. Fine
dustapplications
filter
®
and
pollutionapplications
gases with high
content,
Weller
For standard
withsolid
a small
amount
of flux
offers
filter classes
or F7.
and pollution
gasesF
with
high solid content, Weller®
offers
filter
classes
F or F7.
1. Fine
dust
filter
.
Compact
filter
consisting with
of: a small amount
For
standard
applications
1.
Fine
dust filter
HEPA
filter
.
Compact
filter
consisting
of: high solid
of
flux
and
pollution
gases
For standard applications
with awith
small amount of flux
Filters
particles
up®tooffers
0,3 μm.
Weller
offers HEPA
HEPA
filter
filter
classes
or(High
F7.
content,
Weller
®
and pollution gases with high solid
content,F5
Weller
Efficiency
Particulate
of class
H1HEPA
and (High
H1,
Filters particles
up to Air)
0,3 filters
μm. Weller
offers
offers filter classes F or F7.
medium
filtration
efficiency
99,5of%class
/of:
99,95
Efficiency
Particulate
Air)
filters
H1%.
and H1,
2. Compact
filter
consisting
medium
filtration efficiency 99,5 % / 99,95 %.
HEPA
filter
. Compact filter consisting of:
Wide
gas filter
Filtersband
particles
up to 0.3 µm. Weller offers
HEPA
filter
For
cleaning
harmful
fumesParticulate
and vapours.Air)
The Weller
Wide
band
gas
filter
hEPA
(high
filters
Filters particles Efficiency
up to 0,3 μm.
Weller offers HEPA
(High
wide
bandH12
gas
filter
of 0
% active
For
cleaning
harmful
fumesmedium
and
vapours.
The carbon
Weller
of class
and consists
H13,
Efficiency
Particulate
Air) filters
of classfiltration
H1 and H1,
and
0
%
Puratex.
Harmful
gases
with
a
high
molewide
band gas
filter /consists
of 0 % active carbon
efficiency
99.5%
99.95%.
medium
filtration
efficiency
99,5 % / 99,95 %.
cular
weight
are cleaned
by the
active
carbon.
and 0
% Puratex.
Harmful
gases
with
a highPuratex
moleis
suitable
forare
absorbing
gases
lowercarbon.
molecular
cular
weight
cleaned
by theofactive
Puratex
Wide
band
gas
filter
Wide band gas filter
weight.
Because
of its composition,
Puratex
is able
is
suitable
for absorbing
gases
of and
lower
molecular
For
cleaning
harmful
fumes
vapours.
For
cleaning
harmful
fumes
and vapours.
The Weller
to
convert
a large
of
chemical
pollutants
by
weight.
Because
ofnumber
its composition,
Puratex
is able
The
Weller
gas
filter
wide
band
gaswide
filter band
consists
of 0
% consists
active carbon
means
of active
molecular
modification
into non-polluting
to
convert
a largecarbon
number
of
chemical
pollutants by
of
50%
and
50%
Puratex.
and 0 % Puratex. Harmful gases with a high molegases.
means
of molecular
modification
into non-polluting
harmful
gases
with
aby
high
molecular
weight
cular
weight
are cleaned
the active
carbon.
Puratex
gases.
are
cleaned
by
the
active
carbon.
Puratex
is suitable for absorbing gases of lower molecular
.
filterfor
(option)
is Gas
suitable
gasesPuratex
of lower
weight.
Because absorbing
of its composition,
is able
The
gasfilter
filterweight.
is
used for
extracting
fumes
.
Gas
(option)
molecular
Because
of adhesive
its pollutants
composition,
to
convert a large
number
of chemical
by
and
solvents.
Experience
has
shown
that
filtering
The
gas filter
is used
for
extracting
adhesive
fumesof
Puratex
is
able
to
convert
a
large
number
means of molecular modification into non-polluting
suspended
particles
is not
so
vital
inof
this
respect.
and
solvents.
Experience
shown
that
filtering
chemical
pollutants
byhas
means
molecular
gases.
The
gas filter
is into
fillednon-polluting
% active
suspended
particles
iswith
not 0
so vital
ingases.
thiscarbon
respect.and
modification
0
Puratex.
and
H13 iscarbon
omitted.
The%gas
filter is The
filledHEPA
withH12
0 %
active
and
. Gas filter (option)
0
% Puratex.
The HEPA H12 and H13 is omitted.
3. Gas
filter
The
gas filter
is (option)
used for extracting adhesive fumes
The
gas
filter
is
used
for
extracting
adhesive
and solvents. Experience has shown that filtering
fumes and
solvents.
has
shown
suspended
particles
is notExperience
so vital in this
respect.
thatgas
filtering
not so
The
filter issuspended
filled with 0particles
% active is
carbon
and
vital
this respect.
The
filled with
0
% in
Puratex.
The HEPA
H12gas
andfilter
H13 isisomitted.
50% active carbon and 50% Puratex. The hEPA h12 and h13 is omitted.
Note: Some of the above items may require a freight lead time. Product depictions are not to scale. Broken shelf packs attract a 5% Surcharge. Prices herein do not include GST.
301856 INSIDE PAGES.indd 18
10/01/14 12:15 PM
Sound level
< 39 db (A) at 1 m distance
Portable unit for stand alone applications
ain filter system. A compressed
Maximum vacuum
20.000 Pa
er removes additional odours
Operating pressure
3,5 - 6 bar
ompressed air. This highly
30 l/min
ystem makes the WFE a genuine Air consumption
tem. The filter-lift system allows Height
200 mm (7.8 in)
nient filter cartridge replaceDiameter
140 mm (5.5 in)
ume Extraction) soldering irons
HEPA
filter
2,7 kg
/ 5.9H13
lb
directly to the unit – additional Weight
and
quired.
wide band gas filter
Compressed air cleaning filter
Compact filter
Consists of: HEPA filter H13, wide band gas filter
(50 % active carbon, 50 % Puratex)
Fine dust filter F7
Order No. 0V
005 36 402 99
Order No. 10V
WFE
WFE P
Attributes
Solder
Fume electrically
Extractingdriven
Unit
Small,
portable,
fume extraction unit
tion unit
eaning filter
005 36 402 99
WFE
Attributes
E P is a line voltage fume
Up to FE soldering irons can be
designed to run with one or two
connected
ction) soldering irons. The WFE P
Electric vacuum pump to produce the
long-life, soundproofed vacuum
required vacuum
ce the required vacuum – it does
power stages for higher extraction
pressed air supply. The vacuum
perfomance with FE soldering irons
safe applications
low sound level
power settings which can be sePortable unit for standESD
alone
s of rocker switches depending
of FE soldering irons connected
saves energy. The motor is
Technical Data
ee and has a thermal over load Maximum capacity
2 FE soldering irons
nit. The filter lift system allows
HEPA
Sound
level
< 45filter
db (A)H13
at 1 m distance
nient main filter replacement.
and
230 V / 50 Hz
ns are connected directly to unit Operating voltage
wide band gas filter
ads are not required.
Power input
70 W
Tip Extraction
The Weller® WFE P is a line voltage fume
Up to FE soldering irons can be
Description
Material No.
Shelf
extraction unit
designed to run with one or two
connected
Pack
FE (Fume Extraction) soldering irons. The WFE P
Electric vacuum pump to produce the
T0053639599
WFEP2
1
has an electric, long-life,® soundproofed vacuum
required vacuum
The Weller WFE P2 is a line voltage fume extraction unit
pump to produce
the required
vacuum
it FE
does
power stages for higher extraction
designed
to run with
one or –
two
(Fume Extraction)
soldering irons.
The WFE
has an electric,
long-life,
not need a compressed
air supply.
TheP2vacuum
perfomance
with FE soldering irons
vacuum
pump
required unit for stand alone applications
pump has twosoundproofed
power settings
which
cantobeproduce
se- thePortable
vacuum - it does not need a compressed air supply. The
lected by means
of rocker
depending
vacuum
pumpswitches
has two power
settings which can be
on the number
of FE soldering
connected
selected
by means irons
of rocker
switches depending on the
number
FE soldering
irons is
connected to the unit. This
to the unit. This
savesofenergy.
The motor
saves energy. The motor is maintenance-free and has a
maintenance-free
and
has
a
thermal
over
thermal over load to protect theload
unit. The filter lift system
to protect theallows
unit. The
lift systemmain
allows
fast filter
and convenient
filter replacement. FE
HEPA filter H13
soldering
ironsfilter
are connected
directly to unit - additional
fast and convenient
main
replacement.
and
leads are not required.
FE soldering irons
are connected directly to unit
• Up to 2 FE soldering irons can be
wide band gas filter
– additional leads
are not required.
connected
• Electric vacuum pump to produce the
required vacuum
• 2 power stages for higher extraction
performance with 2 FE soldering irons
Scope of supply
• Portable unit for stand alone
applications.
Scope of
WFE P Fume extraction
unitsupply includes:
Compact filter • WFE P Fume extraction unit
• Compact
Consists of: HEPA
filter H13,filter
wide band gas filter
Consists
of: hEPA filter h13, wide band
(50smoke
% activeabsorption
carbon,
50 % tube
Puratex)
The
is integrated into
Fine dust filter F7gas filter (50% active carbon,
the handle. It can
placed over the joint
50%be
Puratex)
• Fine
F7
Ordersoldering
No. 0V
36 386 99 when
when
butdust
canfilter
be005retracted
Technical Data:
Order to
No.the
10V
WFE2P and can also be
access
joint
is
a
problem
Maximum capacity 2 FE soldering irons
removed for cleaning.
The
irons
areattemperaSound level
<45
db (A)
1m distance
Operating
voltage
ture controlled,
ergonomic
and230V/50Hz
allow precise
Power input 70W
handling. These
electronically controlled irons
Maximum vacuum 30.000 Pa
height 295mm (11.6in)
Diameter 140mm (5.5in)
Weight 4kg/8.8lb
FE (Fume Extraction) Soldering Irons
Maximum vacuum
30.000 Pa
Height
295 mm (11.6 in)
Diameter
140 mm (5.5 in)
Weight
action unit
filter H13, wide band gas filter
on, 50 % Puratex)
005 36 386 99
WFE2P
0
4 kg / 8.8 lb
Fine dust pre-filter F7
Tip Extraction
Weller
Fine dust pre-filter F7
filter H13, wide band gas filter
on, 50 % Puratex)
Fine dust pre-filter F7
Fine dust pre-filter F7
can be driven from any Weller® power unit
compatible with the rating of the iron or any
Weller® rework station. The range of iron power
ratings and the extensive range of solder tips
mean that there is an iron to suit all applications. The FE soldering irons are supplied with a
burn proof hose 5 mm (0.19 in) diameter, 2,5 m
(98.42 in) long.
ESD safe
Order No.
FE (Fume Extraction) Soldering Irons005 33 150 99
FE (Fume Extraction) Soldering Irons
Description
FE 50 Soldering iron set 50 W / 24 V, with safety rest KH 20*.
Not available in US.
Description
Material No.
Shelf
Pack
The smoke
absorption
tube isinto
integrated into
handle.from any Weller® power unit
can the
be driven
The smoke absorption
tube
is integrated
005 32 152 99
FEplaced
50M Soldering
50 W
/ 24 V, Magnastat
controlled with safety rest KH 20*.
It can be
over the iron
jointset
when
soldering
but can be
the handle. It retracted
can be placed
over
the
joint
compatible
with the rating of the iron or any
access
to the joint is a problem and can
Notwhen
available
in US.
®
Weller
when soldering
but
be retracted
when
rework station. The range of iron power
also
becan
removed
for cleaning.
The irons are
temperature
ergonomic
and
allow
These
access to the controlled,
joint is a problem
and
can
alsoprecise
be handling.
ratings and
the extensive range of solder tips
electronically controlled irons can be driven from any
removed for cleaning.
The irons
are temperamean
thatiron
there is an iron to suit all applica®
Weller
power
unit
compatible
with
the
rating
of
the
005 33 151 99
FE 75 Soldering iron set 80 W / 24 V with safety rest KH 20*.
tions.
FE soldering irons are supplied with a
ture controlled,
and allow
precise
station.
The range of
iron The
power
or ergonomic
any Weller® rework
For
use with LT tips.range of solder tips mean that
ratings
and the extensive
burn proof hose 5 mm (0.19 in) diameter, 2,5 m
handling. These
electronically
controlled irons
there is an iron to suit all applications. The FE soldering
(98.42 in) long.
irons are supplied with a burn proof hose 5mm (0.19 in)
diameter, 2.5m (98.42 in) long.
005 26 162 99
FE Attachments
FE 80 Soldering iron 80 W / 24 V with safety rest KH 20*.
Not available in US.
FE ATTACHMENTS
ESD safe
A range of FE attachments are available to fit standard
Weller® soldering and desoldering irons to convert
fume extraction versions. The attachments
Order No. them toDescription
supplied
with
allextraction
necessary
fittings
and hoses.
* Cleaning brushare
for FE
tubes and
fume
included
theThe
scope of supply of the soldering irons
005 33 150 99
FE 50 Soldering
iron setfunnels
50
W are
/if24
V, affected.
withinsafety
performance
of the retro-fitted
tools
not
Forrest KH 20*.
for use with KHWeller
20 and®KH
23
safety
rests.
soldering
irons
WP120, WP80, WSP80, WMP,
Not
available
in US.
MLR21 or soldering irons with handle diameter 10-13mm
(0.39-0.51 in). Clip will be fixed with an silicone O-ring to
the soldering iron.
005 32 152 99
FE 50M Soldering iron set 50 W / 24 V, Magnastat controlled with safety rest KH 20*.
Gedruckt durch: Martinu am: 4.6.2007
T0052918699
Attachment
withavailable
for WP120,
A range of FEFE
attachments
are
to fit
ForWSP80,
Weller® soldering irons
WP 120, WP 80, 1
Not available
intube,
US. 6.0mm
®
WP80,
MLR21, and
MLR80,
WMP
standard Weller
soldering
desoldering
WSP 80, WMP, MLR 21 or soldering irons with
irons to convert
them to fume
handle
diameter
10 –13 mm (0.39 – 0.51 in).
FE Attachment
withextraction
tube, 4.5mm for WP120,
WMRP
and
versions.
The99WSP80,
attachments
are
supplied
all/ 24 for
Clip
will
be
fixed
withT0052918599
an silicone O-ring to the
MLR21,
MLR80,
WMP
finesafety
soldering
1
005 33 151
FEWP80,
75 Soldering
iron
setwith
80 W
V with
rest
KH 20*.
applications
necessary fittings
and
performance
soldering iron.
For hoses.
use withThe
LT tips.
of the retro-fitted tools is not affected.
Order
005
26 No.
162 99
005 29 186 99
Description
FE
80 Soldering iron 80 W / 24 V with safety rest KH 20*.
FE Attachment
Not
available in US.with tube, ø 6 mm (0.23 in) for WP 120, WSP 80, WP 80, MLR 21,
MLR 80, WMP.
Note: Some of the above items may require a freight lead time. Product
depictions
scale. Broken shelf
5% (0.17
Surcharge.
herein
do notand
include
19
005 29
185 99are notFEto Attachment
withpacks
tube, attract
ø 4,5 amm
in) forPrices
WP 120,
WMRP
WSPGST.
80,
WP 80, MLR 21, MLR 80, WMP for fine soldering applications.
* Cleaning brush for FE tubes and fume extraction funnels are included in the scope of supply of the soldering irons
005
448
FE23Spare
for FE attachment, tube ø 4,5 mm (0.17 in).
301856 INSIDE PAGES.indd 19
10/01/14 12:15 PM
for
use87
with
KH75
20 and KH
safety Clip-Set
rests.
WFE
Attributes
Small, portable, compressed air driven
fume extraction unit
Weller
Weller® WFE2X
The fume extraction unit WFE requires clean
and oil-free compressed air. The vacuum is generated by a maintenance-free compressed air
converter. The contaminated air is purified by a
Description
pre-filter and main filter system. A compressed
air cleaning filter removes additional odours
WFE2X KIT 1
causedfume
by the
compressed
air. This highly
Mobile
extraction
kit
Includes:
efficient filter system makes the WFE a genuine
•air
2Xrecovery
Fume extraction
system.unit
The filter-lift system allows
100-240V / 50/60Hz
fast
and
convenient
filterextraction
cartridge replace• KIT 1 WF60 Sloped stativ
arm for
volume
extraction
consistssoldering
of:
ment.
The
FE (Fume
Extraction)
irons
Funnel
nozzle directly to the unit – additional
connected
are
Stop valve
leads
not required.
Benchare
mounting
bracket
Up to FE soldering irons can be
connected
Maintenance-free compressed air
converter
Material No.
Shelf
Portable unit for stand alone
Pack applications
WFE2XKIT1AU
HEPA filter H13
and
wide band gas filter
Extraction hose
ESD safe
1
low sound level
Scope of supply
Technical Data
Maximum capacity
2 FE soldering irons
Sound level
< 39 db (A) at 1 m distance
Maximum vacuum
20.000 Pa
Volume Extraction
Operating pressure
3,5 - 6 bar
Air consumption
30 l/min
Height
200 mm (7.8 in)
Diameter
140 mm (5.5 in)
Weight
2,7 kg / 5.9 lb
WFE Fume extraction unit
Compressed air cleaning filter
WFES
KITfilter
1
Compact
Kit 1 Funnel Kit
Consists of: HEPA filter H13, wide band gas filter
• 1 x Extraction Arm
(50 % active carbon, 50 % Puratex)
• 1 x Table Mount Kit
Fine dust filter F7
• 1 x Length Hose
• 1 x Funnel
Order No. 0V
005 36 402 99
Order No. 10V
T0053657199
1
Fine dust pre-filter F7
WFE
WFE 2ES / WFE 2CS
Fume extraction unit
®
WFE2ES
as Weller
economical solution
WFE P Kit
Small, portable, electrically driven
fume extraction unit
Attributes
Attributes
® fume extraction unit purifies air
WFE2ES
Mobile
The Weller
WFE P is a line voltage fume
Economy
Volume Extraction Unit
up 2
toPort
workplaces
unit
designed
to run with one or two
•extraction
Up to Easy
Maximum
2 Work Stations
filter exchange
•FE
Brushless
EC
Fan
(Fume
soldering
irons. The WFE P
QuickExtraction)
andExtractor
simple installation
3
h (WFE CS)
• Maximum
Airflow
200m
Speed
control
has anOptional:
electric,
long-life,
soundproofed vacuum
• Maximum Vacuum 1800Pa
to produce the required vacuum – it does
•pump
F5 Pre-Filter
•not
H12need
MainaFilter
(Activatedair
Carbon
compressed
supply. The vacuum
Foam)
has two
•pump
Low Noise
Levelpower settings which can be se-
Up to T0053650599
FE soldering irons 1can be
connected
Electric vacuum pump to produce the
required vacuum
power stages for higher extraction
perfomance with FE soldering irons
Portable unit for stand alone applications
lected by means of rocker switches depending
WFE2ES
KIT
on the number
of FE soldering irons connected
1 Workstation Kit
unit. This saves energy. The motor is
•to
1 xthe
WFE2ES
•maintenance-free
1 x Extraction Arm and has a thermal over load
• 1 x Table Mount Kit
to
protect the unit. The filter lift system allows
• 1 x Length Hose
and convenient main filter replacement.
•fast
1 x Funnel
Portable fume extraction kit for one work station
ESD safe
The fume extraction unit WFE 2ES is easy to
install and operate. It is designed as a smaller
central system and is supplied
complete
with
Technical
Data
flexible hose, arm and bracket, ready for instalMaximum capacity
lation at the workplace.
Sound level
Operating voltage
Power input
Maximum vacuum
Height
005 36 506 99 WFE 2ES Fume extraction unit
Compact filter
Fine dust pre-filter F5
Consists2of:
filter H12,irons
active carbonate foam Scope of supply
FEHEPA
soldering
Fine dust pre-filter F 5
005 36 <
57145
99 db
KIT(A)
1 WFat
Funnel
for volume extraction
1 m60distance
WFE P Fume extraction unit
consists of:
V /Extraction
50 Hz arm
005 36 230
578 99
Compact filter
005 36 573 99 Funnel nozzle
70 W
Consists of: HEPA filter H13, wide band gas filter
005 36 574 99 Stop valve
005 36530.000
75 99 Bench
filter H12
(50 % active carbon, 50 %HEPA
Puratex)
Pa mounting bracket
005 36 576 99 Extraction hose
295 mm (11.6 in)
1400V
mm
Order No.
Weight
Order No. 10V
HEPA filter H13
and
wide band gas filter
Fine dust filter F7
and active carbonate
foam
Order No. 0V
005 36 386 99
Order No. 10V
WFE2P
(5.5 in)005 36 516 99
4 kg / 8.8 lb
WFE2ES KIT1
Fine dust pre-filter F7
Option: Arm with slopped nozzle
Technical Data
Maximum capacity
2 work places
Maximum extraction rate
220 m3/h
Sound level
55 db (A) at 1 m distance
Operating voltage
230V / 50Hz (115V / 60Hz)
Power input
115 VA
Maximum vacuum
1.800 Pa
Weight
1
Scope of supply
Diameter
0
Dimensions (L x W x H)
low sound level
FE soldering irons are connected directly to unit
ESD safe
low sound level
– additional leads are not required.
T0053651699
320 x 320 x 395 mm
005 36 572 99
consists of
005 36 578 99
005 36 577 99
005 36 574 99
005 365 75 99
005 36 576 99
KIT 1 WF Sloped 60 for volume extraction
Extraction arm
Slopped nozzle
Stop valve
Bench mounting bracket
Extraction hose
Option: WFE 2CS with speed control
12.6 x 12.6 x 15.5 in
Order No. 0V
005 36 526 99
9 kg / 19.8 lb
Order No. 10V
WFE2CS
1
20
Note: Some of the above items may require a freight lead time. Product depictions are not to scale. Broken shelf packs attract a 5% Surcharge. Prices herein do not include GST.
301856 INSIDE PAGES.indd 20
10/01/14 12:16 PM
Exploding Drawing for WFE2P
InstallationOption foraC entralS ystem with WFE P
Weller
KH E
Stop + Go-support
WDD 161V
WFE P
soldering
iron
desoldering
iron
Installation Option for a Central and Stand Alone System with WFE 20D
central system
stand alone system
with pipe system 50
upto ca. 200 m
right angle
pipe 50
005 36 322 99
extraction hose 5 mm
> 2,5 m bis max. 10 m
005 25 410 00
WSD 81
connecting element 40-50
005 36 415 99
WMD 3
pipe 50
005 36 323 99
double socket 50
005 36 319 99
connecting
element 40-50
005 36 415 99
T-piece 50
005 36 344 99
pipe 50
005 36 323 99
connecting nipple
for extraction hose
5 mm
005 36 338 99
branch 50
005 36 321 99
pipe clamps 50
005 36 329 99
connecting nipple
for hose 17
005 36 358 65
end seal 50
005 36 324 99
pipe 50
005 36 323 99
end seal 50
005 36 324 99
ESD
SAF
E
extraction
hose 40
005 36 414 00
extension hose 17
005 36 326 99
adapter 17
005 36 343 99
WFE 20D
RS 232 cable (2 m)
005 31 191 99
remote control
005 87 359 09
Note: Some of the above items may require a freight lead time. Product depictions are not to scale. Broken shelf packs attract a 5% Surcharge. Prices herein do not include GST.
301856 INSIDE PAGES.indd 21
21
10/01/14 12:16 PM
Accessories for Tip Suction
Weller
The following products are suitable for 50mm Diameter. When using a 75mm Diameter hose, a tube reducer will be required.
Description
Material No.
WFFMP 50 seal, locking adjustable
T0053637199
Spare Part Filters
Spare filter for WFE2S:
Fine dust filter F5 (10 pieces)
Compact filter Consists of: hEPA filter h12, wide band gas filter (10% active carbonate
foam)
Spare filter for WFE2ES:
Fine dust filter F5 (10 pieces)
Compact filter Consists of: hEPA filter h12, wide band gas filter (10% active carbonate
foam)
22
T0058735884
T0058762701
Note: Some of the above items may require a freight lead time. Product depictions are not to scale. Broken shelf packs attract a 5% Surcharge. Prices herein do not include GST.
301856 INSIDE PAGES.indd 22
10/01/14 12:16 PM
Replacement Soldering Tips
Description
Tip Size
mm
Reach
mm
Shelf
Pack
Material No.
600°F (315°C)
700°F (371°C)
800°F (427°)
Screwdriver
1.6
15.9
PTA6
PTA7
PTA8
1
Single flat
1.6
15.9
PTAA6
PTAA7
PTAA8
1
Screwdriver
2.4
15.9
PTB7
PTB8
1
Single flat
2.4
15.9
PTBB7
PTBB8
1
Screwdriver
3.2
15.9
PTC7
PTC8
1
Single flat
3.2
15.9
PTCC7
PTCC8
1
Screwdriver
4.7
15.9
PTD7
PTD8
1
Single flat
4.7
15.9
PTDD7
Screwdriver
6.0
15.9
Conical flat
1.2
15.9
Screwdriver
0.8
15.9
Long Screwdriver
1.2
Long Screwdriver
PTC6
1
PTE8
PTH7
PTH8
1
25.4
PTK7
PTK8
1
2.0
25.4
PTL7
PTL8
1
Long Screwdriver
3.2
25.4
PTM7
PTM8
1
Long conical
0.8
25.4
PT07
PT08
1
Conical
0.8
15.9
PTP7
PTP8
1
Narrow
Screwdriver
1.6
15.9
PTR7
PTR8
1
Long conical
0.4
25.4
PTS7
PTS8
1
PTS6
Note: Some of the above items may require a freight lead time. Product depictions are not to scale. Broken shelf packs attract a 5% Surcharge. Prices herein do not include GST.
301856 INSIDE PAGES.indd 23
1
1
PTF7
PTH6
Weller
PT SERIES Suit WTCPS/T stations and TC series soldering pencils.
23
10/01/14 12:16 PM
t WDH 10 (Set)
Weller
0°C
nents with high heat
demands
Order number
Replacement
Soldering Tips
ip XT B
T0052920299
mm
0 mm
mm
mm
t WDH 10 (Set)
0°C
nents with high heat demands
XT B10 (Set)
tipWDH
0°C
mm
t WDHwith
10 (Set)
nents
high heat demands
XT B 10 (Set)
tpWDH
0°C
mm
nents
0°C with high heat demands
ip XT Bwith high heat demands
nents
XT B10 (Set)
tipWDH
ET SERIES
Suits EC1000/2000 WES50, WES51, WESD51 stations fitted with EC1201A, WSP50 and WSP51, PES50 & PES51 soldering pencils.
Description
Material No.
Shelf
Pack
15.9
ETA
1
15.9
ETAA
1
2.4
15.9
ETB
1
2.4
15.9
ETBB
1
3.2
15.9
ETC
1
3.2
15.9
ETCC
1
4.7
15.9
ETD
1
Tip Size
mm
Reach
mm
Screwdriver
Order number
1.6
Single flat
1.6
Order number
Screwdriver
T0054470899
Single flat
T0054470399
Order number
Screwdriver
T0054470199
Single flat
Order number
T0054470499
Screwdriver
Single
flat number
Order
4.7
15.9
ETDD
1
T0054470999
Screwdriver
0.8
15.9
ETH
1
number
LongOrder
Screwdriver
T0054471599
1.2
25.4
ETK
1
Long Screwdriver
2.0
25.4
ETL
1
Order number
Long Screwdriver
T0054470599
3.2
25.4
ETM
1
Long conical
0.8
25.4
ETO
1
0.8
15.9
ETP
1
Order number
Conical
T0054471099
Order
number
Narrow
Screwdriver
Order
number
T0052920299
T0054471699
1.6
15.9
ETR
1
Long conical
0.4
25.4
TETS
1
Conical
Order number
0.6
15.9
ETT
1
Single
flat
Order
0.4
17.8
ETUB
1
T0054470699
number
Order
number
T0052920299
Mini Wave for J Leads and Gullwings
ETGW
T0054472199
Order number
Order
number
Order number
T0054470399
T0052920299
T0054471799
Order number
Order
number
T0052920299
Order
number
T0054470899
mm
T0054470799
Order number
mm
Order number
00°C
mm
T0054470399
Order number
T0054470199
nents with high heat demands
Order
number
T0054471899
Order number
Order
number
ip
XT
B
T0052920299
Order
tmm
WDH 10 (Set)
T0054470899
Order number
number
XT SERIES
to suit WP120 Soldering Pencil
T0054470499
mmm
T0054470399
T0054471299
Order number
Order number
mm
mm
Order
number
T0054470399
0°C
Order
Description
Width
Thickness
Material No.
Shelf
T0054470199
Order number
number
T0054470999
mm
mm
,4 mm with high heat demands
Pack
nents
Order
number
T0054470899
T0054471399
Order number
Order
number
ip XT B
T0052920299
mm
Order
number
T0054470899
Order
number
Order
number
T0054470199
XTALT0054470499
Chisel
1.6
1.0
1
0 mm
T0054471599
T0054470199
Order
T0054471199
Order number
number
mm
Order
number
0 mm
T0054470399
Order
number
T0054470199
Order
number
mm
T0054470999
Order
number
mm
T0054470599
T0054470299
XTMT0054470499
Chisel
3.2
1.2
1
mm
Order
T0054470299
Order number
number
Order
number
mm
T0054470899
Order
number
T0054470499
Order
T0054471599
Order number
number
T0054471099
Order
number
T0054470999
Order
number
T0054470399
XTA Chisel
1.6
0.7
1
T0054471499
Order number
0mm
mm
T0054470399
Order
number
T0054470199
mm
Order
number
T0054470999
Order
T0054470599
Order number
number
T0054471699
Order number
number
T0054471599
Order
T0054471999
Order
number
mm
T0054470499
XTBOrder
Chisel
2.4
0.8
1
T0054470899
number
T0054470499
Order
number
T0054471599
Order
number
mm
T0054471099
BOrder
number
mm
T0054470699
Order number
number
T0054470599
Order
0 mm
T0054472099
Order number
T0054470199
number
mm
T0054470999
T0054470599
XTCOrder
Chisel
3.2
0.8
1
Order
number
T0054470599
Order
T0054471699
Order number
number
T0054472199
Order number
number
T0054471099
Order
mm
T0054472299
Order number
T0054470499
Order
number
T0054471599
mm
Order
number
T0054471099
T0054470699
XTD Order
Chiselnumber
4.6
0.8
1
T0054470699
T0054471799
Order number
number
T0054471699
Order
Order number
mm
T0054470999
Order
number
T0054470599
Order
number
T0054471699
Order
number
mm
T0054472199
T0054470799
XTE
Chisel
5.9
1.2
1
mm
T0054470799
Order number
number
T0054470699
Order
Order number
T0054471599
Order
number
mm
T0054471099
Order
number
T0054470699
Order
number
T0054471799
T0054471899
Order
number
T0054472199
Order
mm
Order number
number
T0054470599
Order
number
T0054471699
Order
number
mm
T0054472199
Order
number
24
Note: Some of the above items may
require
a freight lead time. Product depictions are not to scale. Broken shelf packs attract a 5% Surcharge. Prices herein do not include GST.
m
T0054470799
T0054471299
Order number
number
T0054471799
Order
Order
number
mm
T0054471099
Order
number
T0054470699
Order
number
T0054471799
Order
number
4
mm
T0054471899
301856
INSIDE
PAGES.indd
24
10/01/14
mm
T0054471399
Order number
T0054470799
12:16 PM
Replacement Soldering Tips
Material No.
Style
Size 1
Size 2
Reach
LT1
Round
0.25
-
12.5
LT1L
Round
0.2
-
25
Bent Round
0.2
-
25
Round
0.2
-
15
LT1SLX
Bent Round
0.4
-
20.5
LT1X
Bent Round
0.4
-
20.5
LT4AU
Single Flat
1.2
-
15
LT4X
Bent Round
1.2
0.4
16.4
LTA
Chisel
1.6
0.2
12.5
LTAS
Round
1.6
-
12.5
LTAX
Bent Chisel
1.6
0.8
13.5
LTB
Chisel
2.4
0.8
12.5
LTC
Chisel
3.2
0.8
12.5
LTCS
Round
3.2
-
12.5
LTD
Chisel
4.6
0.8
12.5
LTGW
Gull Wing
3.2
2.3
17.8
LTF
Single Flat
1.2
-
12.5
LTH
Chisel
0.8
0.4
12.5
Bent Chisel
0.8
0.2
20
Chisel
1.2
0.4
20
Knife (J-Lead)
6.2
-
20
LTL
Chisel
2.0
1.0
20
LTM
Chisel
3.2
1.2
20
LTS
Round
0.4
-
20
LT1LX
LT1S
LTHX
LTK
LTKN
T0058744845
Short Barrel
40mm
T0058744846
Long Barrel
68mm
Note: Some of the above items may require a freight lead time. Product depictions are not to scale. Broken shelf packs attract a 5% Surcharge. Prices herein do not include GST.
301856 INSIDE PAGES.indd 25
Weller
LT Tip Selection Chart to suit WSP80/WP80
25
10/01/14 12:16 PM
Replacement Soldering Tips
Weller
NT Tip Selection Chart to suit WMP Pencil
Description
Width A
Thickness
B
Length C
Material No.
Chisel Tip
0.8mm
0.4mm
8.4mm
NTH
Chisel Tip
1.2mm
0.4mm
8.4mm
NTK
Chisel Tip
1.6mm
0.4mm
8.4mm
NTA
Chisel Tip
1.6mm
0.4mm
9.5mm
NT6
Chisel Tip
2.4mm
0.8mm
7.4mm
NTB
Chisel Tip
3.2mm
0.8mm
7.8mm
NTC
Chisel Tip
4.0mm
0.8mm
7.8mm
NTD
Chisel Tip, Bent
0.4mm
1.6mm
8.2mm
NTAX
Round Tip, Bent
0.4mm
-
8.6mm
NT1X
0.25mm
-
7.4mm
NT1
-
8.5mm
NT1S
Soldering Tips
for micro soldering pencil WMP
Round Tip
NT-Tip
Round Tip, Small
0.25mm
Description
Width A
Thickness B
Length C
Chisel tip
0,4 mm
0,8 mm
1,2 mm
1,6 mm
1,6 mm
2,4 mm
3,2 mm
4,0 mm
0,15 mm
0,4 mm 0.4mm
0,4 mm
0,4 mm
0,4 mm
1.2mm
0,8 mm
0,8 mm
0,8 mm
14,0 mm
8,40.14mm
mm
8,4 mm
9,5 mm
7,4 mm
7,8 mm
8,2 mm
8,6 mm
8.4mm
NT H
NT1SC
NT K
NT A
NT 6
9.9mm
NT B
NT C
NT D
NT4
3.0mm
13.4mm
NTGW
Chisel tip, bent
Round tip, bent 45°
1,6 mm
Ø 0,4 mm
0,4 mm
8,2 mm
8,6 mm
NT AX
NT 1X
Round tip
Ø 0,25 mm
–
7,4 mm
NT 1
8,5 mm
NT 1S
Chisel Tip
Round Tip, Sloped 45°
Gull Wing
ety rest WDH 60 (Set)
ety rest WDH 60 (Set)
ety rest WDH 60 (Set)
ety rest WDH
perature
450°C60 (Set)
perature
450°C
dering
very
small SMD parts
perature 450°C
dering very
small
perature
450°C
soldering
tip
RTW SMD
2 parts
dering very small
SMD
parts
soldering
tipsmall
RTW SMD
2
dering
very
soldering tip RTW 2 parts
soldering tip RTW 2
2.0mm
Order number
Order
number
T0051317899
RTW Tip Selection
to suit WMRT thermal tweezer
OrderChart
number
T0051317899
Round tip slim Order
–
number Ø 0,25 mm
T0051317899
T0051317899
Cat No.
Ø 1,2 mm
–
Order number
RTW1
Order
number
T0054465199
Order
number
T0054465199
Order
number
T0054465199
NT Measuring T0054465199
tip
Order number
for thermo element
Order
number
T0054465299
Order
number
RTW2
T0054465299
Order
number
T0054465299
T0054465299
Order number
Order
number
T0054465399
Order
number
T0054465399
Order
number
RTW3
T0054465399
T0054465399
Order number
Order
number
T0054465499
Order
number
T0054465499
Order
number
T0054465499
RTW4
T0054465499
Order number
Order
number
T0054465699
Order
number
T0054465699
Order
number
T0054465699
T0054465699
2,0 mm
3,0 mm
13,4 mm
Ø 0,5 mm
–
–
W
W
W
W
W
W
W
W
able, for soldering
able, for0201
soldering
ponents
/ 0402
able, for0201
soldering
ponents
/ 0402
able, for0201
soldering
ponents
/ 0402
ponents 0201 / 0402
26
Width 1
0.4mm
Width 2
-
NT 1SC
Style
Round tip, sloped
45°
Gull wing
0W
0W
0W
0W
Dimensions
Type/Order No.
9,9 mm
Length OA
NT 4
NT GW
Tweezer tip
Single product code
Material No.
T0054465199
NT MS
0.7mm
0.4mm
Tweezer tip
T0054465299
3mm
0.7mm
Tweezer tip
T0054465399
6mm
0.7mm
Tweezer tip
T0054465499
Note: Some of the above items may require a freight lead time. Product depictions are not to scale. Broken shelf packs attract a 5% Surcharge. Prices herein do not include GST.
301856 INSIDE PAGES.indd 26
120 soldering irons (120 W | 24 V)
Order number
10/01/14 12:16 PM
Replacement Soldering Tips
Material No.
Shelf
Pack
1.2
T0054445599
1
5.0
2.0
T0054445299
1
LhT-E Chisel Tip
7.0
2.0
T0054445199
1
LhT-F Chisel Tip
9.3
2.0
T0054445099
1
Tip Size
mm
Material No.
mm
Shelf
Pack
T0054460199
1
T0054461299
1
T0054460299
1
Description
Tip Size
mm
mm
LhT-C Chisel Tip
3.2
LhT-D Chisel Tip
Weller
WSP150 SERIES
RT SERIES to suit WMRP pencil
Description
RT1 Needle Tip
0.2
RT1C Chisel Tip
0.4
RT2 Point Tip
0.8
RT3 Chisel Tip - Straight
1.3
0.4
T0054460399
1
RT4 Chisel Tip - 1.5mm thick
1.5
0.4
T0054460499
1
RT5 Chisel Tip, bent, 30°
0.8
0.4
T0054460599
1
RT6 Round Tip, bevelled, 45°
1.2
T0054460699
1
RT7 Knife Tip, sloped, 45°
2.2
T0054460799
1
RT8 Chisel Tip
2.2
0.4
T0054460899
1
RT9 Chisel Tip
0.8
0.4
T0054460999
1
RT10GW Gull Wing
1.2
2.0
T0054461099
1
RT11 Chisel Tip
3.6
0.9
T0054461199
1
T0054461399
1
RT Measuring Tip
0.15
Note: Some of the above items may require a freight lead time. Product depictions are not to scale. Broken shelf packs attract a 5% Surcharge. Prices herein do not include GST.
301856 INSIDE PAGES.indd 27
27
10/01/14 12:16 PM
Replacement Soldering Tips
Weller
WT SERIES to suit WT-50 Thermal Tweezers
Tip Size
mm
“x”
mm
Material No.
Shelf
Pack
WTA-1
1.0
11.0
T0054414199
1pr
WTA-2
WTA-2
3.0
11.0
T0054414699
1pr
WTA-3
WTA-3
6.0
11.0
T0054414799
1pr
WTA-4
12.5
10.0
T0054414399
1pr
WTA-5
18.5
12.0
T0054414499
1pr
WTA-12
3.0
T0054415399
1pr
Tip Size
mm
Material No.
Shelf
Pack
Taper
1.0
WPT01
1
Screwdriver
2.4
WPT02
1
Chisel
2.0
WPT03
1
Screwdriver
5.0
WPT04
1
Nozzle
1.5
WHC0150
1
Nozzle
4.7
WHC0152
1
Tip Size
mm
Material No.
Shelf
Pack
Tapered Needle
0.5
WPT15
1
Chisel
3.0
WPT16
1
hot Blow
1.5
WHC54
1
hot Blow
4.9
WHC55
1
Catalogue
No.
WTA-12
WPT0 SERIES PYROPEN TIPS, Suit WSTA6 Auto Ignition Jr.
Description
WPT SERIES PYROPEN TIPS, Suit WST2 Junior
Description
28
Note: Some of the above items may require a freight lead time. Product depictions are not to scale. Broken shelf packs attract a 5% Surcharge. Prices herein do not include GST.
301856 INSIDE PAGES.indd 28
10/01/14 12:16 PM
Replacement Soldering Tips
Tip Size
mm
Material No.
Shelf
Pack
Conical
3mm
720101AU
1
Chisel
10mm
720102
1
Spade
4mm
720103
1
Conical
2mm
720105
1
Spade
4mm
720106
1
Pyramid
2mm
720107AU
1
Flat
3mm
720113
1
hot Blow
4mm
720151
1
hot Blow
6mm
720152
1
hot Blow
10mm
720153
1
Tip Size
mm
Material No.
Shelf
Pack
Taper
-
WPT1
1
Chisel
2.0
WPT2
1
Spade
2.0
WPT3
1
Spade 45°
3.0
WPT4
1
-
WPT5
1
Square Taper Pyramid
0.5
WPT7
1
Spade 35°
2.0
WPT8
1
Spade 35°
3.0
WPT9
1
Offset Tapered Needle
1.0
WPT10
1
Chisel
8.0
WPT11
1
Round head Needle
3.0
WPT12
1
Long Tapered Needle
5.0
WPT13
1
-
WPT14
1
hot Blow
2.5 ID
WHC50
1
hot Blow
3.3 ID
WHC51
1
hot Blow
4.9 ID
WHC52
1
hot Blow
7.4 ID
WHC53
1
heat Shrink Attachment Long
WAR54
1
heat Shrink Attachment Small
WAR55
1
Description
Weller
REPLACEMENT TIPS JUMBO PYROPEN WSTA5
WPT SERIES PYROPEN TIPS, Suits WSTA3 and WPA2
Description
Taper Needle
Threaded Tip Base
Note: Some of the above items may require a freight lead time. Product depictions are not to scale. Broken shelf packs attract a 5% Surcharge. Prices herein do not include GST.
301856 INSIDE PAGES.indd 29
29
10/01/14 12:16 PM
Replacement Soldering Tips
Weller
PSI SERIES PORTASOL TIPS Suit PSI-100 Irons
Tip Size
mm
Material No.
Shelf
Pack
Single Flat
1.0
PSI1
1
Single Flat
2.4
PSI2
1
Single Flat
3.2
PSI3
1
Single Flat
4.8
PSI4
1
Single Flat
1.0
PSI5
1
Double Flat
2.4
PSI6
1
Double Flat
3.2
PSI7
1
Double Flat
4.8
PSI8
1
hot Blow
-
PSI9
1
Hot Knife
-
PSI10
1
Description
Replacement Desoldering Tips
DS SERIES TIPLETS Suit DS102, DS651, DS1201, DS1203A Tools and DS650 Station/DS80UNC/DSV80
Description
mm
Tip Size
mm
Material No.
Shelf
Pack
DS103
1
mm
DS103 Collecter Tube Assy.
DS110
0.63
1.52
12.7
DS110
1
DS112
0.91
1.93
12.7
DS112
1
DS113
1.16
2.48
12.7
DS113
1
DS114
1.80
3.25
12.7
DS114
1
DS116
1.14
2.48
19.05
DS116
1
DS117 Desoldering Tip
1.5
2.9
18
T0051355000
1
DS113 Desolder Tip Left
1.2
2.5
18
T0051351300
1
DS119
0.7
1.9
26
T0051352700
1
Metric
30
Note: Some of the above items may require a freight lead time. Product depictions are not to scale. Broken shelf packs attract a 5% Surcharge. Prices herein do not include GST.
301856 INSIDE PAGES.indd 30
10/01/14 12:16 PM
Replacement Desoldering Tips
Outside
Ø
Inside
Ø
Length
a
Material No.
Shelf
Pack
DX110 NOZZLE
1.9
0.7
23
T0051314000
1
DX111 NOZZLE
2.5
0.7
23
T0051314100
1
DX112 NOZZLE
2.3
1.0
23
T0051314200
1
DX113 NOZZLE
2.5
1.2
23
T0051314300
1
DX113HM NOZZLE with improved thermal
transfer
2.5
1.2
23
T0051315000
1
DX114 NOZZLE
3.3
1.8
23
T0051314400
1
DX115 NOZZLE
1.9
0.7
27
T0051314500
1
DX116 NOZZLE
2.7
1.2
27
T0051314600
1
DX117 NOZZLE
2.9
1.5
23
T0051314700
1
DX118 NOZZLE
1.5
0.7
23
T0051314800
1
DX119 Needle tiplet with non wettable stainless
steel tube for removal of solder bridges in
connection with hot air pencil
1.1
0.7
31
T0051315100
1
DX120 NOZZLE without inside tube for cleaning
sMD pads
2.5
1.1
22
T0051315200
1
DX Cleaning Tool (Conus insert cleaning tool)
T0058706794
1
Nozzle Set DX110-DX115
T0051379099
1
Description
Weller
DSX SERIES CAM LOCK TIPS
Replacement Soldering Tips
CT5 SERIES Suits W60D Soldering pencil
Description
Tip Size
mm
Reach
mm
Shelf
Pack
Material No.
600°F (315°C)
700°F (371°C)
800°F (427°C)
CT5A7
CT5A8
1
CT5AA7
CT5AA8
1
CT5B8
1
Screwdriver
1.6
29.36
Spade
1.6
19.00
Screwdriver
2.4
29.36
Spade
2.4
19.00
CT5BB6
CT5BB7
Screwdriver
3.2
29.36
CT5C6
CT5C7
CT5C8
1
Spade
3.2
19.00
CT5CC6
CT5CC7
CT5CC8
1
Screwdriver
4.8
29.36
CT5D7
CT5D8
1
Spade
4.8
19.00
CT5DD7
CT5DD8
1
Screwdriver
6.35
29.36
CT5E7
1
Spade
6.35
19.00
CT5EE7
1
CT5AA6
1
Note: Some of the above items may require a freight lead time. Product depictions are not to scale. Broken shelf packs attract a 5% Surcharge. Prices herein do not include GST.
301856 INSIDE PAGES.indd 31
31
10/01/14 12:16 PM
Replacement Soldering Tips
Weller
CT6 SERIES Suits W100D Soldering pencils
Description
Tip Size
mm
Reach
mm
Shelf
Pack
Material No.
600°F (315°C)
700°F (371°C)
800°F (427°C)
CT6C8
Screwdriver
3.18
37.3
CT6C6
CT6C7
Screwdriver
4.76
37.3
CT6D6
CT6D7
Screwdriver
6.35
37.3
CT6E6
CT6E7
CT6E8
1
CT6F6
CT6F7
CT6F8
1
Soldering Irons and Tips
Magnastat Controlled Line Voltage
Soldering Irons / Unregulated Line Voltage
Irons
Screwdriver
9.52 Soldering
37.3
Welding Mirror (50 x 40 x 4) teflon coated
Order No.
005 61 056 99
Description
Line voltage soldering iron 200 W, 230 V,
Magnastat
controlled
CT2 SERIES Suits W201 Soldering Iron
• complete with soldering tip CT2 F7 and safety rest
Screwdriver
Soldering
Tips for W 201
1
T0051176799
Model
W 201
Screwdriver
(CT2E7, CT2E8)
1
Price (€)
98,00
7.0
-
T0054240799
T0054240899
1
10.0
-
T0054241799
T0054241899
1
(CT2F6, CT2F7, CT2F8)
Order
No.
Screwdriver
005(CT2G8)
42 407 99
005 42 408 99
Model
CT2 E7
CT2 E8
Description11.0
Chisel tip 370°C
Chisel tip 425°C
005 42 417 99
005 42 418 99
CT2 F7
CT2 F8
005 42 428 99
CT2 G8
Width A
425°
Price (€)
T0054242899
7,0 mm
7,0 mm
16,90
16,90
Chisel tip 370°C
Chisel tip 425°C
10,0 mm
10,0 mm
16,90
16,90
Chisel tip 425°C
11,0 mm
16,90
7,0 mm
7,0 mm
16,90
16,90
S.M.T. Soldering and Desoldering Accessories
1
HOT AIR NOZZLES FOR HAP1 Hot Air Pencil
005 42 507 99 CT2 EX7
005Description
42 508 99 CT2 EX8
005 42 517 99
F04
005 42 518 99
F04
F06
005 15 124 99
005 13 824 99
Chisel tip bent 370°C
Chisel tip bent 425°C
CT2 FX7
Chisel tip bent 370°C
Flat Nozzle
CT2 FX8
Chisel tip bent 425°C
Flat Nozzle
WDC
10,0 mm
10,0 mm
Weller WDC – Dry Cleaner (see page 168)
Metal wool WDC replacement (2 pieces)
10 x 1.5mm
12 x 1.5mm
16,90
16,90
19,00
4,10
Material No.
Shelf
Pack
T0058727773
1
T0058727772
1
Unregulated Line Voltage Soldering Irons
Robust heating elements of special steel between natural mica-leaves, embedded in cast ceramics and first-class
material make the Weller SPI irons outstanding in technology and life-time. The SPI irons come with plated and
oxidation prevented Weller “Longlife“ tips.
Order No.
005 64 005 99
Model
SPI 16
Description
Line voltage soldering iron 15 W, 230 V, unregulated
• complete with soldering tip 4SPI15212 and holder
• Heating up time ~180 sec.
• Tip temperature ~360°C
Price (€)
39,50
Soldering Tips for SPI 16
32
Note: Some of the above items may require a freight lead time. Product depictions are not to scale. Broken shelf packs attract a 5% Surcharge. Prices herein do not include GST.
301856 INSIDE PAGES.indd 32
Order No.
4SPI15 210
4SPI15 213
Model
SPI15 210
SPI15 213
Description
Pointed tip
Pointed tip
Width A
0,4 mm
0,8 mm
Price (€)
4,20
4,20
10/01/14 12:16 PM
301856 INSIDE PAGES.indd 33
10/01/14 12:16 PM
High Precision Tweezers
Erem Tweezers Introduction
The following pages show a selection
of Erem high precision tweezers for the
electronics industry. They are available in
various shapes,
finish, and materials such as:
Temperature resistant to 300°C.
Suffix
S
SA
N
TA
None
Material
Stainless Steel.
Non-magnetic, anti-acid alloy.
Non-magnetic nickel-silver alloy.
Non-magnetic titanium.
Tempered carbon steel.
Features and benefits:
• Twice the heat resistance of Teflon
(500°C).
• The non-stick property of the Pyroplast
coating results in no capillary effect on
the tweezers tips while soldering.
• No contamination can be caused by
either a positive or negative charge.
• Resistant to radiation.
• Coating thickness is 40 microns.
Typical applications for Erem high
precision tweezers:
• Electronic assembly
• Component handling
• Soldering
• Wire and lead cutting
• Gripping
• Wafer handling
• Wire stripping
• Biomedical
Erem
Reference Dimensions
Erem Coatings
The exclusive Erem Pyroplast coating is
available by special order on many models.
This coating protects sensitive parts against
temperature change.
Pointed Tips Straight
Description
Shelf
Pack
•
•
•
•
•
Precision micro tweezers
Stainless Steel
Serrated grips and inside serrated tips
Guide pin to avoid tip overlapping
80mm, 6g
20AS
1
•
•
•
•
•
Precision tweezers
Special Stainless Steel
Non-magnetic
Shorter tips than 3CS
110mm, 11g
3CSA
1
3CSASL
1
same as 3CSA but economy model
•
•
•
•
•
Precision tweezers
Special Stainless Steel
Non-magnetic
Flat inside tips, very resistant
120mm, 14g
OOSA
1
•
•
•
•
Precision tweezers
Special Stainless Steel
Non-magnetic
120mm, 16g
AASA
1
•
•
•
•
Precision tweezers
Non-magnetic
Medium round tips for gripping tip side 2mm
120mm, 15g
2ASA
1
SSSA
1
• Precision tweezers
• Special Stainless Steel
• Non-magnetic
• Very narrow and long handles
• Low tension
• 140mm, 11g
34
Material No.
Note: Some of the above items may require a freight lead time. Product depictions are not to scale. Broken shelf packs attract a 5% Surcharge. Prices herein do not include GST.
301856 INSIDE PAGES.indd 34
10/01/14 12:16 PM
Cutting – high grade tool steel, ESD safe
Model/Order No.
599FO
Description
Side cutter for Kevlar silks only,
115 mm, 67 g
Price (€)
133,00
Pointed Tips Straight Relieved
Description
Material No.
599TFO
Side cutter semi flush cut, Tungsten Carbide blades,
forvery
cutting
• Precision tweezers, with
fine fibre
tips optics, Kevlar and small stainless wires,
• Special Stainless Steel115 mm, 67 g
165,00
Shelf
Pack
5SA
1
258SA
1
• Non-magnetic
• 115mm, 12g
• Precision tweezers with synthetic (PPS) tips
• Special Stainless Steel
• Non-magnetic
• ESD safe
Holding
/ Gripping
• Heat resistant up to 250°C
• 120mm, 15g
Model/Order No.
Description
• Precision tweezers with
pointed tweezers
synthetic (PPS)
tipstips,
249SA
Precision
with PPS
and serrated finger grips
for secure
handling
special
stainless
steel, non magnetic,
• Volume resistance 16 Ω/cm
120 mm, 20 g
• Heat resistant up to 250°C
Price (€)
249SA 22,50
1
3CBS
1
5ASA
1
5ASASL
1
Precision tweezers with fine tips
Curved
Special Stainless Steel
Non-magnetic, relieved
120mm, 15g
7SA
1
same as 7SA but economy model
7SASL
1
Pointed Tips Bent
Kit for SMD handling
• Precision tweezers with fine tips
Model/Order
• Curved 40° No.
• Stainless Steel
3900KC
Description
Kit for SMD handling
• 110mm, 15g
consists of:
51SA
tweezers
• Precision tweezers with
fine precision
tips
102ACA SMD tweezers
• Oblique 15°
• Special Stainless Steel103ACA SMD tweezers
• Non-magnetic
150SAMB SMD tweezers
• 115mm, 12g
150SAMF SMD tweezers
same as 5ASA but economy
670EPmodel
tip cutter
48 Fibre Optic Tools/Kits
Erem
• Resistant to acids and molten soldering tin.
• Water repellant
•
•
•
•
•
Price (€)
172,00
•
•
•
•
•
•
Precision tweezers bent 40°
Alignment pin
Serrated grips and inside serrated tips
Special Stainless Steel
Non-magnetic
150mm, 22g
24SA
1
•
•
•
•
•
Precision tweezers bent 50° with fibre-grip handles
Reverse action
Special Stainless Steel
Non-magnetic
150mm, 26g
30SA
1
•
•
•
•
Cutting tweezers
Carbon steel
Blade 9,5mm
115mm, 26g
15AGW
1
Cutting Tweezers
Note: Some of the above items may require a freight lead time. Product depictions are not to scale. Broken shelf packs attract a 5% Surcharge. Prices herein do not include GST.
301856 INSIDE PAGES.indd 35
35
10/01/14 12:16 PM
Cutters
Side Cutters
Cutters
Series 600 Micro – high grade tool steel, ESD safe, resharpenable
Side- and Tip Cutters
Miniature cutters for extremely fine electronics offering improved access into confined areas.
CUTTERS SERIES 600 MICRO - HIGH GRADE TOOL STEEL, ESD SAFE, RESHARPENABLE
Miniature cutters for extremely fine electronics offering improved access into confined areas.
Micro
Micro
Medium
Medium
Maxi
Maxi
Tip Cutters – tapered and relieved head
Fine cutter head. One side is cut away for access even in confined areas.
b
a
Series 600
Series 2400
Series 500
New Series
Series 600
2400
Series 500
Description
MagicSense
Side
relieved
head,
MagicSense
9,0 cutter
mm flush cut, super fine
11,0 mm
11,0 mm
allows
very good access, 11,0 6,0
Width a b
9,0
mm mm
11,06,5
mmmm
Thickness
6,0 mm
mm
medium
hard wire 0,6 mm, Cu
0,8
mm,
Thickness
b
6,0
mm
6,0
mm
6,5
mm
Sideand Tiphead
Cutters
Tip Cutters - tapered and
relieved
110 mm, 48 g
Series 800
Cutters
Series
800
Price
(€)
Model/Order No.
622NB
Width
a
35,00
13,5 mm
13,5
mm
7,5 mm
7,5 mm
Cutters
Erem
Side- and Tip Cutters
Fine cutter head. One side is cut
away for access even in
confined areas
NEW
Cutters
Side- and Tip Cutters
Description
Material No.
Side Cutters – oval head
676E
Sidehead
cutter
cut, same
as 622NB,
The
most common cutting
forflush
standard
cutting
applications. The robust cutting head allows high44,00
cutting
Cutters
– tapered
short cuttingTip
head
and more
robust and relieved head
capability.
Fine
head.
side is cut away for access even in confined areas.
medium hard
wirecutter
0,6 mm,
CuOne
0,8 mm,
Shelf
Pack
110 mm, –48high
g
Series 2400 MagicSense
grade tool steel, ESD safe, resharpenable
Model/Order
No.
Description
Price (€)
Medium size. Combines
robustness,
view and accessibility. The series 2400 MagicSense offers optimal ergonomic
612N
Side
cutter
semi
flush
cut,
small
head
for
very
good
access,
35,00
shape and very high hardness grade.Model/Order No.
Description
776E 44,00
Side
cut, cutterhard
1
medium
wire
0,8 mm,
hard wire 0,5 mm, Cu 1,3 mm,
776Ecutter super full flushSide
super
full
flush
cut,
622NB
Side cutter flush cut, super fine relieved head,
miniature side cutter, super fine relieved
head,
110
mm,
48
g
miniature
side
cutter,
super
fine
relieved
head,
Medium allows very good access,
Maxi
allows very good access, Micro
allows
very
medium hard wire 0,6 mm,
Cu 0,8
mmgood access,
medium hard wire 0,6 mm, Cu 0,8 mm,
medium hard wire 0,6 mm, Cu 0,8 mm,
110mm, 48g
ESD SAFE
110 mm, 48 g
Cutters
Side
Cutters
622N
b a
632NCF
P
110 mm, 48 g
Side cutter flush cut, small head for very good access,
35,00
Side
cutterhard
superwire
full flush
cut, Cu 1,3 mm,
62,00
medium
0,8grade
mm,
Series 2400 MagicSense
– high
tool
steel,
ESD
safe,
resharpenable
Side
cutter
flush
cut, same
asSeries
622NB,800
only
for 600
soft676E
materials
(seeSeries
page 34,
Specials)
New
Series
2400
Series
500
110robustness,
mm,
48 g TOOL
Medium size. Combines
and accessibility.
Thecutting
series
2400
MagicSense
offers optimal ergonomic
CUTTERS SERIES 2400 MAGICSENSE
- HIGH
GRADE
STEEL,short
ESD
SAFE,
headRESHARPENABLE
and more robust
110 mm,
48 g view
MagicSense
shapesize.
andCombines
very high hardness
grade.
Medium
robustness,
view
and
accessibility.
The
series
2400
MagicSense
medium
hard
wire
0,6
mm,
Cu
0,8
mm,optimal
Width a
9,0 mm
11,0 mm
11,0 mm
13,5offers
mm
Series 600
Micro – high
grade
tool steel, ESD safe, resharpenable
ergonomic shape and very high hardness
grade.
110
mm,
48
g
Thickness b
6,0 mm
6,0 mm
6,5 mm
7,5 mm
NEW
Miniature cutters for extremely fine electronics offering improvedMaxi
access into confined areas.
Maxi
36,00
medium
hard
wire
0,7
mm,
Cu
1,3
mm,
Side Cutters – oval head
Micro
Maxi
776E
Side cutter super full flush cut, Medium
mm,
g relieved
Tip
– straight,
tapered
and
head
TheCutters
most common
cutting110
head
for 48
standard
cutting
applications.
The robust
high cutting
miniature
sidecutting
cutter,head
superallows
fine relieved
head,
Fine
cutter head allows access even in confined areas.
capability.
allows very good access,
b a
medium hard wire 0,6 mm, Cu 0,8 mm,
Model/Order No.
Description
Price
(€)
Series
600 600
Series
2400
Series
800
New
Series
Series
2400
Series 500
500
Series
800
110
mm, 48 gSeries
b a
Model/Order
No.
Description
Price
(€)
MagicSense
2412E
Semi flush cut, robust cutting head
for general
43,00
MagicSense
670E a
Tip
cutter,
flush cut, vertical,
short11,0
head,mm
48,00
Width
9,0
mmapplications,
11,0
mm Series 2400
13,5 mm
cutting
high cutting
capability,
New
Series
600 super
Series 800
Width a
9,0 hard
mm
11,0
mm
11,0
mmflush cut,
13,5 Series
mm 500
632NCF
Side
cutter
full
medium
wire
0,5
mm,
Cu
0,8
mm,
medium
hard 6,0
wiremm
0,5 mm, Cu 1,6
mm,
Thickness b
6,0
mm hard wire 1,0
6,5
mm MagicSense
7,5 mm
Thickness b
6,0
mm
6,0
mm
6,5
mm
7,5
mm
only
for
soft
materials
(see
page
34,
Specials)
110
130mm,
mm 48 g
9,0
mm
11,0 mm
11,0 mm
13,5 mm
Side Cutters - oval headSide Cutters – tapered head Width a
110
mm, 48 g
Small tapered head for cutting application
Thickness inb dense working
6,0areas.
mm
6,0 mm
6,5 mm
7,5 mm
Description
Material No.
Shelf
Side
Cutters
–
oval
head
Pack
2422E
Flush cut, robust head for general cutting applications,
43,00
Model/Order
No. cutting
Description
Price
(€)
The most common
head
forcut,
standard
applications.
The robust cutting head allows 61,00
high
cutting
670EP
Tip
cutter,
flush
vertical,
verywire,
precise,
short head,
high
cutting
capability,
for cutting
soft
The most common cutting head
622NA
Side
cutter
flush
cut,
35,00
Side
Cutters
–
oval
head
capability.
for
PCBs and
packages
up1,6
to 0,25
for standard cutting applications.
medium
hardmicro
wire 1,0
mm, Cu
mm, mm,
medium
hard
wire
0,7
mm,
1,0
The robust cutting head allows
Thewire
most
cutting
head for standard cutting applications. The robust cutting head allows high cutt
medium
0,4common
mm,
Cu Cu
0,6
mm,mm,
130
mmhard
high cutting capability.
110
mm,
48
g
capability.
48Tip
g Cutters – straight, tapered and relieved head
Model/Order No. 110 mm,
Description
Price (€)
632N
2412E
Micro
Medium
Micro
Side cutter super full flush cut,Medium
small head for very good access,
Semi flush
cut, robust
head for
general
Fine cutter
head cutting
allows access
even
in confined areas.
medium hard wire 0,5 mm, Cu 0,8 mm,
Flush cut, robust head for general
43,00
110cutting
mm, 48applications,
g
Wire definitions see p. 22
Cutters 25
high cutting capability, for soft wire,
622N
medium
hard wire 1,0 mm, CuSide
1,6cutter
mm, flush cut, small head for very good access,
medium hard wire 0,8 mm, Cu 1,3 mm,
130 mm
Side Cutters – tapered head
110
48flush
g cut, vertical, very precise, short head,
Small tapered head for cutting application
670EPin dense working areas.
Tip mm,
cutter,
24 Cutters
2422E
for PCBs and micro packages up to 0,25 mm,
Model/Order
No.
2432E
2477E
36
43,00
2432Efull flush cut, rasor blades
Supercutting
full
flush
cut, rasor blades
cut Description
No.
2432E 43,00
Super
cut Model/Order
1
applications,
high cutting
capability,
670EPF hard wire 0,8 mm,
Same
as 670EP
but
finer
version
67,50
medium
Cu 1,6
mm,
medium
hard
wire
0,8
mm,
Cu
1,6
mm,
612N
Sidewire
cutter
cut,mm,
small head for very
good access,
medium
hard wire 1,0 mm, hard
0,5semi
mm,flush
Cu 1,6
130mm
for
pitches under 0,5 mm, short head,
130micro
mm
hard wire 0,8 mm, hard wire 0,5 mm, Cu 1,3 mm,
130 mm
Model/Order
No. aftermedium
Description
Optional: Safety lead device
12,6048
Euro
cutting.
110+ mm,
g holds wire scraps
ESD SAFE
110
mm,
48
g 595EW
Note: For all side cutters series 500, 600
and 2400. Add “W” when
ordering,
e.flush
g.
670E
Tip
cutter,
cut, vertical, short head,
Wire definitions see p. 22
Description
Super full flush cut, rasor blades
cut hard wire 0,4 mm, Cu 0,6 mm,Price (€)
43,00
medium
Flushmedium
cut, tapered
46,00
hardhead,
wire for
0,8cutting
mm, Cu 110
1,6 mm, 48 g
in dense
working
areas,
632N
Side
cut, small
head do
fornotvery
good
access,
Note: Some of the above items may require a freight lead time.application
Product
are not
to scale.
Broken
shelfcutter
packs super
attract afull
5% flush
Surcharge.
Prices herein
include
GST.
130depictions
mm
medium hard wire 1,0 mm, Cu 1,3 mm,
medium hard wire 0,7 mm, Cu 1,3 mm,
127 mm
110 mm, 48 g
301856 INSIDE PAGES.indd 36
670EPF
Same as 670EP but finer version
10/01/14 12:16 PM
Pr
P
Cutters
Medium size. Combines robustness, view and accessibility. Big variety of cutting heads for precise cutting in dense
working areas.
SideSide- and
andTip
TipCutters
Cutters
Micro
Cutters
Medium
Maxi
Side Cutters
Series 500 Medium – high grade tool steel, ESD safe, resharpenable
Series
Medium
– high
grade
tool steel,
ESD
safe,heads
resharpenable
Medium
size.500
Combines
robustness,
view and
accessibility.
Big variety
of cutting
for precise cutting in dense
a size. Combines robustness, view and accessibility. Big variety of cutting heads for precise cutting in dense
b
Medium
working areas.
CUTTERS SERIES 500 MEDIUM
HIGH GRADE TOOL STEEL, ESD SAFE, RESHARPENABLE
working -areas.
Series
600 Micro – high grade tool
New Series 2400
Series 600
Series 500
Series 800
Medium size. Combines robustness, view and accessibility. Big variety of cutting heads
for precise cutting in
Miniature
Micro
Medium
Maxi cutters for extremely fine electronics
MagicSense
dense working areas.
Micro
Width a
9,0 mm
11,0 mm
11,0 mm Medium
13,5 mm Maxi
Micro
Medium
Maxi
Micro
Thickness b
6,0 mm
6,0 mm
6,5 mm
7,5 mm
a
b
b
a
New Series 2400
Series 600
Series 500
Series 800
Series 600
New Series 2400
Series 500
800
a
b Series
Side Cutters – oval head
MagicSense
MagicSense
New Series
Series 600
2400
Series 500
Series 800
The most
head
for standard cutting
applications.
The11,0
robust
head allows
cutting
Width
aa common cutting
9,0
mm
11,0 mm
13,5
mm
Width
9,0
mm
11,0
mm11,0 mm
mmcutting
13,5high
mm
MagicSense
Series 600
Thickness
6,0mm
mm
capability.bb
Thickness
6,0
6,0 mm 6,0 mm 6,5 mm 6,5 mm
7,5 mm7,5 mm
Side Cutters - oval head
The most common cutting head
for standard cutting applications.
The robust cutting head allows
high cutting capability.
Side- and Tip Cutters
Side- and Tip Cutters
Model/Order No.
Description
512N
9,0 mm
6,0 mm
Cutters
11,0 mm
6,0 mm
Side Cutters
11,0 mm
6,5 mm
13,5 mm
Width a 7,5 mm
Price (€)
Thickness
b
Material No.35,00
9,0 mm
Description
6,0 mm
Shelf
Side cutter semi flush cut, economical line,
Pack
robust, for general cutting applications
Side Cutters – oval head
and precise working, high cutting capability,
Sidehigh
Cutters
The most common cuttingmedium
head for
standard
cutting
applications.
cutting– oval head
hard
wire 1,0
mm, hard
wire 0,5The
mm,robust
Cu 1,6cutting
mm, head allows
Series
600
Micro
– high
grade
tool
capability.
Side Cutters – oval
head
The
most
common
cutting
head for
standard
cu
115 mm, 67 g
cutters
extremely fine electronics
The most common cutting head for standard cutting applications. The robust cuttingMiniature
head allows
highforcutting
capability.
Model/Order
(€)
capability.
512NPrice
Side
cutter semiNo.
flush cut,Description
economical
line,flush cut, same as 512N
1
512E
Side
cutter semi
43,00
robust,
applications
512N for general cuttingSide
cutter semi
flush cut, economical line,
Micro
but
burnished
head,
Model/Order35,00
No.
Description
and precise working, highrobust,
cutting for
capability,
general
cutting
medium
hard
wire 1,0
mm,applications
hard wire 0,5 mm, Cu 1,6 mm,
Model/Order
No.
Description
medium
hard wire 1,0
mm, hard
wire 0,5 mm, Cu 1,6 mm,
and
precise
working,
high
capability,
115 mm,
g semi flushcutting
115mm,
512N67g
Side 67
cutter
cut, economical
line,
612N
ESD SAFE
medium hard wire 1,0 mm, hard wire 0,5 mm, Cu 1,6 mm,
Tip Cutters – angled, narrow
head
robust,
for general cutting applications
522N
Side cutter flush cut, economical
115 mm,line,
67 robust,
g
Angled
head
for precision,
reach
operator
visibility.
and
precise
working,
high cutting capability,
for
general
cutting
applications
andand
precise
working,
b a
522Ncutting capability,
Side Cutters
cutter flush– cut,
economical
line,
robust, ESD safe, resharpenable 35,00
Tungsten
Hard Metal
high
grade
tool
high
medium
hard
wire
1,0
mm,
hard steel,
wire 0,5 mm, Cu 1,6 mm,
512Egrade
Side
cutter
semi
flush
cut,
same and
as 512N
forCugeneral
cutting
applications
precise
working,
medium
hard
wire
1,0 mm,
1,6
mm,
High
tool
steel,
Tungsten
Carbide
blades,
for
constant
load.
High
precision side cutter for stainless and43,00
hard
115
mm,
67
g
ESD SAFE
but
burnished
head,
115mm,
67g
high
cutting
capability,
wires like Nickel plated wire and cored-wire electrode. Piano until 60 HRc.
Cutters
Cutters
New
Erem
Cutters
Cutters
Width a
Thickness b
Price
Side(€)
cutter semi flush
35,00 hard wire 0,8
medium
110
1 mm, 48 g
Series 600
New
Model/Order No.
555E
512E
Description
Price (€)
622N
Side cutter flush cut, sm
Cutters
medium hard wire 1,0 mm, hard
wire
0,5 mm,
1,6 mm,
Sideand
Tip Cu
Cutters
CuSide
1,6
mm,
Tip cutter
flush cut
35°,flush
smallcut,
cutting
head,
56,50
Width
a
9,0
mm hard wire 0,8
Side
cutter
semi
same
as
512N
43,00
medium
115 mm, 67 g
strong
for cutting
Thickness b
6,0
butversion,
burnished
head, applications in confined areas
110mm
mm, 48 g
Tip
Cutters
angled, narrow head
where high cutting capacity is required,
Sideand Tip -Cutters
medium
hard
wire
1,0
mm,
hard
wire
0,5
mm,
Cu
1,6
mm,
599E Cutters – oval head
Side cutter flush cut, with short and robust head,
46,50
Side
medium hard wire 0,6 mm, Cu 1,3 mm,
Angled head for precision, reach
522N
Side
cutter
flush
economical
line,
robust,
35,00
115
mm,
67cut,
g1,0
medium
hard
wire
mm, Cu
1,6
mm,
The
most
common
cutting
head
for
standard
cutting
applications.
The
robust
cutting
head
allows
high
cutting
Series
600
Micro
high grade
Tip
Cutters
–
narrow
head tool
120 mm, 68 g
and operator visibility.
Side Cutters –angled,
oval –
head
for
applications and precise working,
115general
mm, 67cutting
g
capability.
Miniature
cutters
for
extremely
fine
Angled
head
for
precision,
reach
and
operatorcuv
The most common cutting head for electronics
standard
high cutting capability,
632N 572E 50,00
Side
cutter super full fl
572E
Tip
cutter
flush
cut
40°,
relieved
jaws
for
easier
access,
Tip
cutter
flush
cut
40°,
relieved
jaws
for
easier
access,
1
Tungsten Hard Metal
Cutters
– high
grade
ESD safe, resharpenable
capability.
medium
hard
wire
1,0 cut,
mm,
Cu 1,6tool
mm, steel,
522Nhard wire
cutter
flush
economical
line, robust,
35,00 hard wire 0,7
medium
medium
0,6 mm,
CuSide
1,3 hard
mm,
Model/Order
Description
(€)
medium
wire
0,6 mm,
Cu 1,3 mm,
Micro
High
grade tool No.
steel, Tungsten
Carbide
blades,
for constant
load. High precision side cutter for stainless Price
and hard
115
mm,
67
g
115mm,
68g
for
general
cutting
applications
and
precise
working,
110
mm, 48 g
622TX
Flush
cut,
miniature
side
cutter,
small
head,
130,00
115 and
mm,cored-wire
68 g
wires
electrode.
Piano
until 60
HRc.
Model/Order No.
Description
532Nlike Nickel plated wire
Side high
cutter
super
full
flush cut,
for wire
precise
No.
Description
piano
wirecutting
0,2
mm,
medium
hard
0,6cutting,
mm, hard wire 0,4 mm, Model/Order35,00
capability,
ESD SAFE 46,50
555E
Tip
35°
599E
Side
cutter
flush cut,
cut, with short and robust head,
with1,2
very
612N
Sidecutter
cutterflush
semicut
flush
Cu
mmsharp
medium
hard wire 1,0 mm, Cu 1,6 mm,
medium hard wire 1,0
strong
version,
for
cutt
0,8 mm, Cu 1,6 mm,
medium hard wire 0,8
115 mm, 67 g
115 mm, 67 g
where
high
cap
a
b
110 mm,
48cutting
g
582E
Tip
cutter
flush
cut
45°,
ideal
for
working
48,00
CUTTERS TUNGSTEN HARD
METAL
CUTTERS
HIGH
GRADE
TOOL
STEEL,
ESD
SAFE,
RESHARPENABLE
Side Cutters – oval head
medium
hard
wire
0,6
onhead
PCBs
orcutter
cutting
component
leads,
Side
flush
cut, with
short and
robust
46,50
The599E
most
cutting
for
standard
cutting
applications.
The
robust
cutting
headside
allows
highfor
cutting
high
gradecommon
tool steel,
Tungsten
Carbide
blades,
for
constant
load.
highhead,
precision
cutter
stainless and
Series
600
120 mm,
68 g New
599T
Semi flush
cut,
robust
side
cutter,
107,00
„Anti
Overbite
System“
avoids
blades
overlapping,
hard
wires like Nickel plated
wire
andhard
cored-wire
electrode.
Piano
capability.
medium
wire
1,0
mm,
Cu 1,6
mm, until 60 hRc.
Tungstenhard
Carbide
blades,
forCu
standard
medium
wire
mm,
1,3 mm,cutting applications,
Side Cutters 35,00
– tapered head
28 Cutters
67full
g0,6flush
Side 115
cuttermm,
super
cut, for precise cutting,
Width
a
9,0
mm flush cut 40°
Side Cutters - oval head 532N
highmm,
cutting
capability, piano wire 0,6 mm,
572E
Tip
115
68
g
622Ntapered
Sidecutter
cutter
flush cut,
s
Small
head
application
in de
Model/Order No.
Description
Price
(€)for cutting
with
very sharp cut,
Thickness
b
6,0
mm
medium hard wire 1,0 mm, hard wire 0,8 mm, Cu 1,5 mm,
medium
Description
Material No.
medium hard
hard wire
wire 0,6
0,8
622TX
Flush cut,hard
miniature
side
cutter,
small
head,
130,00 Shelf
medium
wire 0,8
mm,
Cu 1,6
mm,
115 mm,
67
g tapered head for access even in confined areas,
Pack
582EW
flush
cut,
small
58,00
115
pianomm,
wire67
0,2
110 mm,
mm, 68
48 gg
115
g mm, medium hard wire 0,6 mm, hard wire 0,4 mm, Model/Order No.
Description
same
as
582E
but wirh safety lead service,
The most common cutting head
Cu
1,2
mm
532N
cutter
super
full flush
35,00
622NA
Side
cutter flush cut,
for standard cutting applications.
599TF
FlushSide
cut,hard
robust
side
Side
Cutters108,00
– oval head
medium
wire
0,6cutter,
mm,
Cu 1,3cut,
mm,for precise cutting,
The robust cutting head allows
with
very
sharp
cut,
medium
hard
wire 0,7
Tungsten
Carbide
blades, for standard cutting applications,
115
mm, 67
g
The most common cutting head for
standard
cu
high cutting capability.
medium
hard
wire
0,8
mm,
Cu
1,6
mm,
110
mm,
48
g
high
cutting
capability,
piano
wire
0,6
mm,
capability.
28 Cutters
582E
Tip
cutfull
45°f
632N
Sidecutter
cutterflush
super
115hard
mm,wire
67 g1,0 mm, hard wire 0,8 mm, Cu 1,5 mm,
medium
599T 107,00
Semi
cutter,
1 PCBs or cutting com
599Tflush cut, robust sideSemi
flush cut, robust side cutter,
on
medium hard wire 0,7
115
mm, 67
gcutting
Tungsten
for cutter
standard
applications,
593AE Carbide blades,Tip
flush
cutblades,
30°,
cut
DIL leads
from
the rear,
Tungsten
Carbide
foreasily
standard
cutting
applications,
Model/Order55,00
No.
Description
„Anti
Overbite
110 mm,
48 g System
high cutting capability, piano
wire
0,6
mm,
cut
pins
on
dense
PCBs,
high
cutting
capability,
wire 0,6 mm,
612N
Side cutter
semi
flush
medium
hard
wire
0,6
medium hard wire 1,0 mm,
hard
wire 0,8
mm, Cu piano
1,5 mm,
medium
1,0wire
mm,0,8 mm, Cu 1,5 mm,
ESD SAFE
medium hard
hard wire
wire 0,4
1,0 mm,
mm, Cu
hard
115mm, 67g
medium
hard
wire wire
0,8
115
mm,
68
g
Optional:
Safety
lead
device
+
12,60
Euro
holds
28 Cutters
115
115 mm,
mm, 68
67 gg
Side Cutters - tapered head
24
Side Cutters – tapered
head
599TF
Flush
cut, robust side cutter,
Small tapered head for cutting
application in dense working
areas.
Cutters
575E
Tip
cutter
flush cutblades,
very
small
cutting
head,
Small tapered head for cutting
application
in45°,
dense
areas.
Tungsten
Carbide
forworking
standard
cutting
applications,
for
dedicate
work
on
hybrid
circuits
or
micro
high cutting capability, piano wire 0,6 mm, modules,
medium
hard
0,6wire
mm,0,8 mm, Cu 1,5 mm,
medium
hard wire
wire 0,2
1,0 mm,
mm, Cu
hard
Model/Order No.
Description
110
mm,
67
gg
115
mm,
67
595Tcutter semi flush cut,Side cutter semi flush cut,
Side
Tungsten Carbide blades, Tungsten
piano wireCarbide
0,4 mm,blades, piano wire 0,4 mm,
medium hard wire 0,8 mm, hard wire 0,6 mm, Cu 1,5 mm,
medium hard wire 0,8 mm, hard wire 0,6 mm, Cu 1,5 mm,
115mm, 67g
115 mm, 67 g
Wire definitions see p. 22
Side Cutters – tapered head
Side cutter
Note: Some of the above items may require 595TF
a freighttapered
lead time.
Product
depictions
areflush
not tocut,
scale.
Broken
shelf packs
attract a 5% Surcharge.
Small
head
for cutting
application
in dense
working
areas.
301856 INSIDE PAGES.indd 37
Model/Order No.
595T
Tungsten Carbide blades, piano wire 0,4 mm,
medium hard wire 0,8 mm, hard wire 0,6 mm, Cu 1,5 mm,
Description
115 mm, 67 g
Side cutter semi flush cut,
Note: For all side cutters series
110 500,
mm,600
48and
g 2400. A
Wire definitions see p. 22
582EW
flush cut, small tapered
same as 582E but wirh
medium hard wire 0,6
622N
Side
cutter67flush
115
mm,
g cut, sm
Side Cutters
–
tapered
head
Price (€)
medium
hard
wirein0,8d
Small tapered
head
for
cutting
application
595T 102,00
1
110 mm, 48 g
593AE
Tip
cutter flush cut 30°
Model/Order No.
Description
cut
on flush
densecut,
PCB
ESD SAFE
622NA
Sidepins
cutter
medium
hard
wire
medium hard wire 0,4
0,7
632N
Side mm,
cutter super
full fl
115
110 mm, 68
48 gg
103,00
medium
hard wire 0,7
Prices herein do not include
GST.
37
110 mm, 48 g
575E
Tip cutter flush cut 45°
Price (€) 10/01/14
12:16 PM
for dedicate work on h
102,00
108,00
50,00
Pliers
Pliers
Pliers
Pliers
Description
Material No.
Pliers
– high grade tool steel, anti-glare finish, ESD safe
Pliers for miniature and standard
electronics
Pliers
– high grade tool steel, anti-glare finish, ESD safe
Pliers
– highESD-safe
grade tool steel, anti-glare finish, ESD safe
Special tool steel, non-reflecting
surface,
Model/Order No.
Description
High grade tool steel
Model/Order No.
Description
543E
Round nose plier, with smooth jaws, very precise,
Model/Order
No.
Description
543E
Round nose plier, with smooth jaws, very precise,
120 mm,
67 very
g with smooth jaws, very precise,
543E nose pliers, with smooth
Round
nose
plier,
Round
jaws,
120 mm,
67 g precise,
120
mm,
67
g
120mm, 67g
Price (€)
Price (€)
43,50
Price
(€)
43,50
543E 43,50
Shelf
Pack
1
ESD SAFE
Pliers
547
Needle nose plier, with smooth rounded jaws, very precise,
547 nose plier, with smooth
Needle
nose plier,
Needle
rounded
jaws,with
verysmooth
prciese,rounded jaws, very precise,
120 laying
mm,nose
67
gplier,
547
Needle
with smooth rounded jaws, very precise,
suitable for forming, bending,
and
120 mm, 67
g feeding in wires
120mm, 67g
120 mm, 67 g
547
45,50
45,50
45,50
1
Erem
ESD SAFE
Pliers
EROP
Flat nose plier, with smooth jaws,
542E
Flat nose plier, with smooth jaws,
precise
542E radiused edges, Flat nose plier, with smooth jaws,
precise
radiused
edges,
542E 67g
Flat
nose
plier, with
smooth jaws,
120mm,.
precise radiused edges,
542E
Pliers Series 2400 MagicSense – high grade tool steel, anti-glare finish, ESD safe
120 mm,radiused
67 g edges,
precise
120 mm, 67 g
120 mm, 67 g
Model/Order No.
Description
2411P
Needle nose pliers with smooth rounded jaws,
very precise,
Cutters and Pliers
Pliers Series 2400 MagicSense
531E
Flat mm
nose plier, Nylon inserts to prevent nicking
146
531E
Flat nose plier, Nylon inserts to prevent nicking
125
mm, 67
g Nylon inserts to prevent nicking
531E
Flat
nose
plier,
Pliers for miniature and standard electronics
125 mm, 67 g
125 mm,
67
g
Pliers
Series for
2400
MagicSense
– high
grade tool steel, anti-glare finish, ESD safe
Optimized ergonomically shaped
handles
increased
comfort
Special tool steel, non-reflecting surface, ESD-safe
Pliers
Model/Order No.
Description
2411PD
Needle
nose pliers, same as 2411P,
2411P
Needle
nose
pliers
with
Needle nose pliers with smooth
rounded
jaws.
but
inside
serrated
tips, smooth rounded jaws,
Model/Order
Description
very
precise,
very
544Eprecise, No.
Chain
nose plier, with smooth jaws,
146
mm
544E
Chain nose
plier,
with
smooth jaws,
146mm
EROP172
Round
nose
plier,
burnished,
safe,
146
120 mm
mm,
67plier,
g with
544E
Chain
nose
smoothESD
jaws,
120
mm,
67
g
125
120 mm,
mm, 63
67 gg
EROP Pliers
Flat nose pliers with smooth
2442P
Flatjaws,
nose pliers with smooth jaws,
2411PD
Needle radiused
nose pliers,
same as 2411P,
precise radiused edges, precise
edges,
146mm
but
inside
serrated
tips,
544D
Chain
nose
plier,
with
jaws,
146
mmnose plier, with smooth
544D
Chain
smooth jaws,
EROP
Needle
noseplier,
plier,with
burnished,
safe,
146
mm
inside
serrated,
544D 174
Chain
nose
smoothESD
jaws,
inside
serrated,
120
mm,
66
g
125 mm,
67 g
inside
serrated,
125 mm, 67 g
125 mm, 67 g
2443P
Round nose pliers with smooth jaws,
2442P
Flat nose
pliers
smooth
jaws,
very
precise,
for with
bending
wires,
precise
146
mmradiused edges,
146 mm
EROP277
Needle
nose
plier, burnished, ESD safe,
Needle nose plier, burnished,
ESD
safe,
140mm, 90g
140 mm, 90 g
Forming Tools
EROP280
Price (€)
43,00
62,00
62,00
62,00
Price
(€)
48,00
2411P 43,00
Price
(€)
44,50
44,50
19,00
44,50
1
ESD SAFE
48,00
ESD SAFE
1
46,50
46,50
19,00
46,50
45,00
43,00
EROP27719,00
ESD SAFE
Round nose pliers with smooth jaws,
very precise, for bending wires,
146 mmnose plier, burnished, ESD safe,
Needle
170 mm, 113 g
1
45,00
26,50
Safe bending, forming and preparation of component connections
For Passive Components – high grade tool steel, anti-glare finish, ESD safe
High grade tool steel
Non-reflecting surface
ESD-safe
Model/Order No.
Description
554E
Pre-forming
tool,ESD
u-shape
EROP170
Flat nose plier,
burnished,
safe, max. 65 mm,
Suitable for component connections,
u-shape
capacitors
0,7 mm, resistors 1/2 W,
120 mm, 63
g
120mm, 70g
120 mm, 70 g
40 Pliers
40 Pliers
40 Pliers
1
ESD SAFE
2442P 43,00
Pre-Forming Tools
2443P
44,00
44,00
44,00
Price (€)
55,50
19,00
1
50,00
19,00
1
554E
R=2mm
Suitable for connections, Flat nose plier,
554A
Pre-forming
tool,ESD
u-shape
EROP171
burnished,
safe, transverse,
u-shape, axial forming
max.
65
mm,
head
width
4 mm,
120
mm,
67
g
Narrow head shape
120 mm, 70 g
554A
R=1.5mm
554TX
38
Pre-forming tool, double u-shape simultaneously,
95,00
max. 65 mm, head width 2,5 mm,
120 mm,are
70not
g to scale. Broken shelf packs attract a 5% Surcharge. Prices herein do not include GST.
Note: Some of the above items may require a freight lead time. Product depictions
301856 INSIDE PAGES.indd 38
10/01/14 12:16 PM
INDEX - BY MATERIAL NUMBER - ALPHA NUMERIC ORDER
Material
Number
Page
No.
AASA ...............................34
CT5A7 .............................31
CT5A8 ..............................31
CT5AA6 ...........................31
CT5AA7 ...........................31
CT5AA8 ...........................31
CT5B8 .............................31
CT5BB6 ...........................31
CT5BB7 ...........................31
CT5C6 .............................31
CT5C7 .............................31
CT5C8 .............................31
CT5CC6 ...........................31
CT5CC7 ...........................31
CT5CC8 ...........................31
CT5D7 .............................31
CT5D8 .............................31
CT5DD7 ...........................31
CT5DD8 ...........................31
CT5E7 .............................31
CT5EE7 ...........................31
CT6C6 .............................32
CT6C7 .............................32
CT6C8 .............................32
CT6D6 .............................32
CT6D7 .............................32
CT6E6 .............................32
CT6E7 .............................32
CT6E8 .............................32
CT6F6 ..............................32
CT6F7 ..............................32
CT6F8 ..............................32
DS103 ..............................30
DS110 ..............................30
DS112 ..............................30
DS113 ..............................30
DS114 ..............................30
DS116 ..............................30
EROP277 ........................38
ETA ..................................24
ETAA ................................24
ETB ..................................24
ETBB ...............................24
ETC .................................24
ETCC ...............................24
ETD .................................24
ETDD ...............................24
ETGW ..............................24
ETh .................................24
ETK ..................................24
ETL ..................................24
ETM .................................24
ETO .................................24
ETP ..................................24
ETR .................................24
ETT ..................................24
ETuB ...............................24
LTA ...................................25
LTAS ................................25
LTAX ................................25
LT1 ...................................25
LT1L .................................25
LT1LX ..............................25
LT1S ................................25
LT1SLX ............................25
LT1X ................................25
LT4Au ..............................25
LT4X ................................25
LTB ..................................25
LTC ..................................25
LTCS ................................25
LTD ..................................25
LTF ...................................25
LTGW ...............................25
LTh ..................................25
LTHX ................................25
Material
Number
Page
No.
LTK ..................................25
LTKN .................................25
LTL ...................................25
LTM ..................................25
LTS ..................................25
NTA ..................................26
NTAX ...............................26
NTB .................................26
NTC .................................26
NTD .................................26
NTGW ..............................26
NTh .................................26
NTK .................................26
NT1 ..................................26
NT1S ...............................26
NT1SC .............................26
NT1X ...............................26
NT4 ..................................26
NT6 ..................................26
OOSA ..............................34
PES51 ...............................8
Ph1201 ............................12
Ph12100 ..........................12
Ph1260 ............................12
Ph50 ................................12
PSI1 .................................30
PSI10 ...............................30
PSI2 .................................30
PSI3 .................................30
PSI4 .................................30
PSI5 .................................30
PSI6 .................................30
PSI7 .................................30
PSI8 .................................30
PSI9 .................................30
PTA6 ................................23
PTAA6 ..............................23
PTAA7 ..............................23
PTAA8 ..............................23
PTA7 ................................23
PTA8 ................................23
PTBB7 .............................23
PTBB8 .............................23
PTB7 ................................23
PTB8 ................................23
PTCC7 .............................23
PTCC8 .............................23
PTC6 ...............................23
PTC7 ...............................23
PTC8 ...............................23
PTDD7 .............................23
PTD7 ...............................23
PTD8 ...............................23
PTE8 ................................23
PTF7 .................................23
PTh6 ...............................23
PTh7 ...............................23
PTh8 ...............................23
PTK7 ................................23
PTK8.................................23
PTL7 ................................23
PTL8 ................................23
PTM7 ...............................23
PTM8 ...............................23
PTO7 ...............................23
PTO8 ...............................23
PTP7 ................................23
PTP8 ................................23
PTR6 ...............................23
PTR7 ...............................23
PTR8 ...............................23
PTS6 ................................23
PTS7 ................................23
PTS8 ................................23
SSSA ...............................34
TC201 ..............................12
Material
Number
Page
No.
TC201B ...........................12
TCP50M ..........................12
TETS ...............................24
T0051176799 ..................32
T0051314000 ..................31
T0051314100 ..................31
T0051314200 ..................31
T0051314300 ..................31
T0051314400 ..................31
T0051314500 ..................31
T0051314600 ..................31
T0051314700 ..................31
T0051314800 ..................31
T0051315000 ..................31
T0051315100 ..................31
T0051315200 ..................31
T0051317199 ..................10
T0051317399 ..................10
T0051317499 ..................10
T0051317799 ..................11
T0051317899 ..................11
T0051318399 ....................9
T0051319099 ....................9
T0051319899 ....................9
T0051320199 ..................11
T0051320299 ..................11
T0051351300 ..................30
T0051352700 ..................30
T0051355000 ..................30
T0051379099 ..................31
T0051382499 ..................13
T0051502699 ..................13
T0051512199 ..................12
T0051512599 ..................13
T0051515599 ..................11
T0051516199 ..................12
T0051516399 ..................12
T0052242099 ..................13
T0052711599 ..................10
T0052711699 ..................10
T0052711799 ..................10
T0052711899 ..................10
T0052917099 ....................9
T0052917199 ..................10
T0052918099 ....................8
T0052918199 ....................8
T0052918599 ..................19
T0052918699 ..................19
T0052918999 ....................9
T0052919099 ..................10
T0052919399 ....................9
T0052919499 ....................9
T0052919999 ....................9
T0052920099 ....................9
T0052920199 ..................11
T0052920299 ..................11
T0052920399 ..................11
T0052920499 ..................11
T0052920599 ..................11
T0052920699 ..................11
T0052921199 ..................11
T0052921299 ..................11
T0052921599 ....................8
T0052921699 ....................8
T0053124699 ..................13
T0053171699 ..................15
T0053277599 ....................6
T0053313399 ..................10
T0053366699 ..................15
T0053370699 ..................16
T0053371599 ..................11
T0053637199 ..................22
T0053639599 ..................19
T0053650599 ..................20
T0053651699 ..................20
T0053657199 ..................20
Material
Number
Page
No.
T0054240799 ..................32
T0054240899 ..................32
T0054241799 ..................32
T0054241899 ..................32
T0054242899 ..................32
T0054414199 ..................28
T0054414399 ..................28
T0054414499 ..................28
T0054414699 ..................28
T0054414799 ..................28
T0054415399 ..................28
T0054445099 ..................27
T0054445199 ..................27
T0054445299 ..................27
T0054445599 ..................27
T0054460199 ..................27
T0054460299 ..................27
T0054460399 ..................27
T0054460499 ..................27
T0054460599 ..................27
T0054460699 ..................27
T0054460799 ..................27
T0054460899 ..................27
T0054460999 ..................27
T0054461099 ..................27
T0054461199 ..................27
T0054461299 ..................27
T0054461399 ..................27
T0054465199 ..................26
T0054465299 ..................26
T0054465399 ..................26
T0054465499 ..................26
T0054470199 ..................24
T0054470299 ..................24
T0054470399 ..................24
T0054470499 ..................24
T0054470599 ..................24
T0054470699 ..................24
T0054470799 ..................24
T0056107599 ..................12
T0058706794 ..................31
T0058727772 ..................32
T0058727773 ...................32
T0058735884 ..................22
T0058744845 ..................25
T0058744846 ..................25
T0058761728 ..................10
T0058762701 ..................22
WAR54 ............................29
WAR55 ............................29
WD1000Au ........................4
WD1000hPTAu .................5
WD1000MAU .....................5
WD1000TAu ......................4
WD1Au ..............................4
WD1MAU ...........................5
WD2000MAU .....................5
WD2MAU ...........................5
WES51D ............................4
WESD51DAu ....................4
WFE2XKIT1AU ................20
WhC0150 ........................28
WhC0152 ........................ 28
WhC50 ............................29
WhC51 ............................29
WhC52 ............................29
WhC53 ............................29
WhC54 ............................28
WhC55 ............................28
WPA2 ...............................13
WPB1 ..............................13
WPT01 .............................28
WPT02 .............................28
WPT03 .............................28
WPT04 .............................28
WPT1 ...............................29
Material
Number
WPT10 .............................29
WPT11 .............................29
WPT12 .............................29
WPT13 .............................29
WPT14 .............................29
WPT15 .............................28
WPT16 .............................28
WPT2 ...............................29
WPT3 ...............................29
WPT4 ...............................29
WPT5 ...............................29
WPT7 ...............................29
WPT8 ...............................29
WPT9 ...............................29
WR2Au ............................14
WR2000AAu ...................14
WR2000DAu ...................14
WR2002Au ......................14
WR3000MAU ...................15
WSTA3 .............................13
WSTA5 .............................13
WSTA6 .............................13
WX1AU ..............................6
WX1010AU ........................6
WX1011AU ........................6
WX1012AU ........................6
WX2AU ..............................6
WX2020AU ........................6
WX2021AU ........................7
WXD2AU ...........................7
WXD2010AU .....................7
WXD2020AU .....................7
W100D .............................12
W60D ...............................12
15AGW ............................35
2ASA ...............................34
20AS ................................34
24SA ................................35
2411P ..............................38
2432E ..............................36
2442P ..............................38
249SA ..............................24
258SA ..............................35
3CBS ...............................35
3CSA ...............................34
3CSASL ...........................34
30SA ................................35
5ASA ...............................35
5ASASL ...........................35
5SA ..................................35
512N ................................37
522N ................................37
542E ................................38
543E ................................38
547 ...................................38
554A ................................38
554E ................................38
572E ................................37
595T ................................37
599T ................................37
7SA ..................................35
7SASL .............................35
720101Au ........................29
720102 .............................29
720103 .............................29
720105..............................29
720106 .............................29
720107Au ........................29
720113 .............................29
720151 .............................29
720152 .............................29
720153 .............................29
776E ................................36
Note: Some of the above items may require a freight lead time. Product depictions are not to scale. Broken shelf packs attract a 5% Surcharge. Prices herein do not include GST.
301856 INSIDE PAGES.indd 39
Page
No.
39
10/01/14 12:16 PM
APEX TOOL GROUP - CUSTOMER SUPPORT
HEAD OFFICE
Sales Phone: 02 6021 6666
Sales Fax: 1800 021 940
Sales E-Mail: alburysales@apextoolgroup.com
Apex Tool Group Pty Ltd
519 Nurigong Street
PO Box 366
ALBURY NSW 2640
ALBURY NSW 2640
Phone: 02 6058 0300
Fax: 02 6021 7403
Email: apextoolaus@apextoolgroup.com
Web: www.apextoolgroup.com.au
REGIONAL SALES TEAM & AGENTS
NSW
DONN TRAYLEN
Regional Sales Manager
Mobile: 0457 750 475
donn.traylen@apextoolgroup.com
IAN BROWN
Sales Supervisor
Mobile: 0417 028 221
Fax: 02 9648 1990
ian.brown2@apextoolgroup.com
PAUL GROSS
Sales Supervisor
Mobile: 0408 666 478
paul.gross@apextoolgroup.com
GEOFF NELSON
Sales Supervisor
Mobile: 0418 478 086
Fax: 02 4920 8936
geoff.nelson@apextoolgroup.com
MARK LINDNER
Sales Supervisor
Mobile: 0418 475 804
mark.lindner@apextoolgroup.com
WARWICK STONE
Sales Supervisor
Mobile: 0417 028 088
Fax: 07 3264 5258
warwick.stone@apextoolgroup.com
RAYMOND CHRISTENSEN
TAMBAR PTY LTD
Phone: 07 4774 5124
Fax: 07 4774 5292
Mobile: 0418 771 098
QLD
PETER HANNAN
Regional Sales Manager
Mobile: 0419 282 426
Fax: 07 3324 8847
peter.hannan@apextoolgroup.com
sales@tambar.com.au
VIC
BRIAN KIDD
Regional Sales Manager
Mobile: 0419 289 557
brian.kidd@apextoolgroup.com
LISA COTTON
Sales Supervisor
Mobile: 0419 293 611
lisa.cotton@apextoolgroup.com
JASON KEMP
Sales Supervisor
Mobile: 0418 471 297
jason.kemp@apextoolgroup.com
MICHAEL MANNING
Sales Supervisor
Mobile: 0448 063 489
michael.manning@apextoolgroup.com
BRETT RAPONI
Regional Manager
Mobile: 0419 293 909
Fax: 08 9272 3903
brett.raponi@apextoolgroup.com
GILLIAN BRAIN
Sales Supervisor
Mobile: 0438 681 704
Fax: 08 9272 3903
gillian.brain@apextoolgroup.com
GRAHAM DOOLAN
Sales Supervisor
Mobile: 0418 476 179
Fax: 08 9272 3903
graham.doolan@apextoolgroup.com
TAS
NT
KATINA STOTT
Sales Supervisor
Mobile: 0419 291 763
katina.stott@apextoolgroup.com
LEW PRETORIUS
L & J PRETORIUS PTY LTD
Phone: 03 6344 2686
Fax: 03 6344 7220
Mobile: 0438 131 669
lewp@precons.com
TERRITORY HARDWARE AGENCIES
GREG MELVILLE
Phone: 0417 887 280
WA
APEX TOOL GROUP
52 Clavering Rd
BAYSWATER WA 6053
Phone: 08 9370 3377
Fax: 08 9272 3903
SA
CHRIS HERMAN
Regional Sales Manager
Mobile: 0419 295 033
chris.herman@apextoolgroup.com
NEW ZEALAND
FIJI
AARON BELL
TOOLWARE SALES LIMITED
ARSHAD DAUD
MIDLINK MARKETING
19 Ackland Street, Vatuwaqa,
SUVA, FIJI
Phone: (+679) 338 6300
Fax: (+679) 338 6290
Mobile: (+679) 992 9227
3 Stonedon Drive
EAST TAMAKI, AUCKLAND, 2013
NEW ZEALAND
Phone: (+649) 579 8080
Fax: (+649) 579 1166
info@toolware.co.nz
NOLAN CALDWELL
Phone: 0418 892 371
ivanp@precons.com
nolan@tha-nt.com.au
PATRICK McINTOSH
Manager, Business Development
& Key Accounts
Mobile: 0418 673 361
patrick.mcintosh@apextoolgroup.com
STUART NAYLOR
Manager, Business Development
& Key Accounts
Mobile: 0418 476 655
midlink@connect.com.fj
ELECTRONICS
BUSINESS DEVELOPMENT
MICHAEL NAISSEN
Product Engineer /
Professional Tools
Phone: 02 6058 0300
Fax: 02 6021 7403
michael.naissen@
apextoolgroup.com
JEFFREY BECKER
Manager, Business Development
& Key Accounts
Mobile: 0417 520 400
jeff.becker@apextoolgroup.com
40
greg@tha-nt.com.au
stuart.naylor@apextoolgroup.com
Note: Some of the above items may require a freight lead time. Product depictions are not to scale. Broken shelf packs attract a 5% Surcharge. Prices herein do not include GST.
301856 INSIDE PAGES.indd 40
10/01/14 12:16 PM
301856 COVER ART.indd 3
10/01/14 12:14 PM
Electronics Prod Catalogue 2014 cover.pdf 1 19/12/2013 4:23:34 PM
301856 COVER ART.indd 4
10/01/14 12:14 PM
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising