The small radio mixer that`s big on features

The small radio mixer that`s big on features
Radio Broadcast Mixer
S1 Radio
Broadcast Mixer
S1 Radio Broadcast Mixer
The small radio mixer
that’s big on features
The S1 has an amazing
feature set and offers a
proper broadcast solution
to community, educational
and student radio stations
that need a versatile, reliable
radio broadcast mixer.
It has a ‘no compromise
on quality’ approach
with excellent mic amps,
comprehensive facilities &
simple, reliable operation.
• High performance, ultra-reliable
on-air radio mixer.
• Low cost.
• Easy to use.
• Small footprint, flush-mounting or
• Analogue & digital inputs & outputs.
• Main stereo output buss plus 2 Aux
output busses, pre or post fader
• Rotating rear panel for ease of
• Integrated power supply.
• Remote outputs per channel.
• Fader start of ancilliary equipment
such as CD players.
• Programmable general purpose I/O.
• Monitor muting on mic live.
• Mic-live/on-air sign switching.
• Monitor outputs for presenter &
guest headphones, & speakers.
• Bright LED meter display PPM/
VU selectable with separate
meterbridge output.
• 100mm ALPS long-throw faders
with control via VCAs.
• Separate telco & stereo cleanfeed o/ps for use with a telephone hybrid
& codec respectively.
• Advanced automation facilities.
• Remote control via free SCi
S1 Digital/Analogue Radio Broadcast Mixer
The Sonifex S1 mixer is a high performance
compact, low cost, fixed format mixing
console designed for on-air radio use. It
can be fitted flush into a desk-top or can be
rack-mounted by the addition of optional
rack ears. The rear connectivity panel can
be rotated 90˚ onto the base of the unit
providing easier connection to the unit
when it is rack-mounted. It has an integral
universal switch mode power supply, which
uses an IEC inlet.
It maintains the same front panel ease of use
found on the Sonifex S2 whilst providing
advanced automated features not seen on
any other product currently available on
the market.
The console consists of ten input channels:
•2 x mono XLR mic/mono XLR line inputs.
• 1 x mono XLR mic/mono XLR telco input.
• 2 x mono XLR mic/mono XLR line inputs/
stereo ¼” jack unbalanced line input.
• 1 x stereo XLR line/stereo XLR cleanfeed
• 2 x stereo XLR line/stereo RCA inputs, one
with a 3.5mm stereo aux input.
• 2 x stereo XLR line/stereo SPDIF & Toslink
digital inputs.
Providing in total 5 mic, 4 mono line, 10
stereo analogue, 2 stereo digital, 1 telco &
1 stereo cleanfeed inputs which you can
switch between.
Wide-Ranging Input Channels
Input source buttons at the top of each
channel strip are used to route the
connected source to the mixer busses.
All of the balanced XLR input connectors
have a 10dB gain switch on the rear panel
for use with unbalanced or low level input
sources. The XLR microphone inputs have
individual +48V phantom power switches
and a gain calibration potentiometer
providing up to 65dB of gain for the
Input channels 1 & 2 have 2 separate
XLRs for microphone & balanced line
input sources.
Input channels 3 and 4 use an XLR and a
combination XLR/stereo jack connector
to allow a microphone input and both a
balanced mono or an unbalanced stereo
line input to be used.
Input channel 5 acts as microphone input or
as a telco input with a dedicated cleanfeed
output, with available line hold remote for
connection to a telephone hybrid.
Input channel 6 is a balanced stereo
line input on XLR together with a stereo
cleanfeed input on balanced XLR for use
with ISDN codecs.
Input channels 7 & 8 have stereo balanced u
Tel: +44 (0)1933 650 700 Fax: +44 (0)1933 650 726 Email: [email protected] Internet:
S1 Radio Broadcast Mixer
S1 Digital/Analogue Radio Broadcast Mixer, Front View
S1 Digital/Analogue Radio Broadcast Mixer, Rear View
Tel: +44 (0)1933 650 700 Fax: +44 (0)1933 650 726 Email: [email protected] Internet:
Radio Broadcast Mixer
S1 Digital/Analogue
Radio Broadcast Mixer
u XLRs and stereo unbalanced phonos on the
rear and channel 7 also has a 3.5mm insert
jack socket on the front panel for use with
an mp3 player/iPod.
Any channel which has the fader up and the
ON button selected is routed to the main
PGM output(s).
Gain for each channel is trimmed by the
front panel TRIM control providing ± 12dB
of gain.
Equalisation is provided on every input
channel, allowing up to 7dB cut and boost
at HF (6.5 kHz) and LF (100Hz). A PAN/
BAL(ance) control is available to facilitate
stereo imaging.
The use of VCAs controlled by the
ALPS long throw 100mm faders give a
smooth, repeatable response and ensures
tight stereo tracking while eliminating
mechanical and electronic noise.
Analogue & Digital Outputs
The S1 has a multitude of output
connectivity: one balanced stereo XLR PGM
output, two balanced stereo AUX outputs
on a 9-way D-type socket, a mono clean
feed output on balanced XLR (for use with a
telephone hybrid), a stereo cleanfeed output
on stereo balanced XLRs (for use with an
ISDN/IP codec) and monitor outputs for
presenter headphones, guest headphones
and loudspeakers. Additional outputs are
provided for talkback on a 9-way D-type
socket and metering using a 15-way D-type
A digital stereo PGM output is provided in
XLR AES/EBU or phono S/PDIF formats. The
output can be referenced to an internal
clock source between 32 kHz and 96 kHz
or external synchronisation sources can
be connected via S/PDIF, AES/EBU or BNC
wordclock. The illuminated DIGITAL SYNC
LED shows when the digital output is locked
to either an internal or external clock.
Two Auxiliary Busses
The S1 has two Auxiliary busses that can
be configured in either pre-fade or postfade mode. Each channel can be routed
to these busses using the potentiometers
Comprehensive Monitoring
The control room loudspeakers, presenter’s
headphones, and guest headphones are
on 6.35mm stereo jack sockets. Front
panel control knobs are used to vary the
monitor and headphone levels and the
presenter’s headphones can be plugged
in to the front and rear of the mixer. The
control room monitor loudspeaker and
headphone levels are variable between 0
(cut off ) and 10 (max). An illuminated MUTE
LED shows when a live microphone channel
has muted the speakers and there are two
pairs of MUTE contact outputs available to
illuminate a ‘MIC LIVE’ light.
A five way electronically interlocking switch
bank selects the source routed to the
speakers and presenter’s headphones from
either of two external inputs (EXT 1, EXT
2), the PGM, or AUX Outputs. The buttons
illuminate to show the selected source,
PGM, AUX 1 and AUX 2 in green, EXT 1 and
EXT 2 in red. The external inputs can be used
for monitoring an off air signal or another
studio output.
Green illuminated AUTO CUE/PFL buttons
adjacent to each level control allow the
monitoring of PFL when an input channel
has been selected to CUE/PFL, either to the
monitors or headphones.
For the Presenter headphones, SPLIT CUE/
PFL can be selected which places the
selected source in mono in one ear and PFL
in mono in the other.
A pair of bright 21 segment LED meters
can be configured to show either VU or
PPM metering. The meters show either the
PGM output or the selection heard in the
presenter’s headphones, selectable by PGM/
MFM (Meter Follows Monitor) button.
A separate TALKBACK button is provided
to allow the Presenter to talk to a Guest.
The S1 uses input channel one as the
talkback source. Global talkback can also
be configured (see the Programmable
GPIO section) to allow every mic channel to
communicate with the Presenter and Guest
A separate TALKBACK 9-way D-type socket
on the rear panel can be used to connect
the talkback output and input to and from
other studios.
Configurable Remotes Per Channel
The remote outputs for each channel are
highly configurable providing every possible
option required to interface your external
equipment to the mixer. Each channel
input has its own START and STOP remote
controls, except the microphone inputs
which have only START outputs. (If you
wanted a MIC stop control signal, you could
configure this using a GPIO). Each remote
can be configured to be triggered from a
variety of sources, including the ON button
and the CUE/PFL Button. The remotes can
be set-up to be either pulsed or continuous
latched outputs, and if in pulsed mode the
ON button has the capability to produce
repeated start pulses on additional ON
button presses, when the channel is ON with
the fader up.
In the case of the Telco & Stereo Cleanfeed
outputs you may want to generate start and
stop remotes independently of the position
of the fader, so that the hybrid or codec can
be triggered to connect before the channel
is opened. This is possible in ‘Telco Mode’
where a ‘start’ is sent when the ON button
is initially pressed & a ‘stop’ is sent when
the ON button is pressed again, turning
the channel selection off. In addition the
channel can be configured to show the state
of the external equipment, e.g. using a tally
back GPI signal from an automation system,
the ON button can flash green when the end
of a song is being reached.
Programmable GPIOs
The S1 also has five General Purpose
Inputs/Outputs (GPIO’s) available. Each
input/output has been designed to be
very versatile & almost any operation with
the mixer can be achieved when utilising
them. A GPI can be configured using the
SCi software to perform up to 10 different
operations from a single input. For example,
in an automated playout situation, you may u
Tel: +44 (0)1933 650 700 Fax: +44 (0)1933 650 726 Email: [email protected] Internet:
Input channels 9 and 10 provide a stereo
analogue XLR input and stereo digital S/PDIF and TOSLink optical inputs.
provided on each channel strip. Each AUX
output has a trim control knob operating
between fully attenuated and unity gain.
Aux busses can be used for a wide range
of purposes including recording telephone
conversations, generating different mixes
for output, connecting to audio processing
equipment and much more.
S1 Radio Broadcast Mixer
u want to:
• Force 4 channels ON with the faders
forced up.
• Force 4 channels to stereo Line Input.
• Mute the Control Room Monitors.
This configuration would use 9 of the 10
operations available for an individual GPI.
The GPOs are equally powerful. The
outputs can be configured to be pulsed
or continuous, and active high or low. An
output can be generated based on actions
required. For example, a GPO can be
configured to generate a global talkback
function with a set-up so that:
• When Mic 2, Mic 3 & Mic 4 are all not live,
generate a GPO continuous output.
The GPO could then be linked back into one
of the GPI’s with the input configured to:
• Force PFL on Mics 2, 3 & 4.
• Enable Auto CUE/PFL on Guest H/phones.
This would allow the guests to freely talk to
each other until one of their microphones
goes live. This is just an example of the
potential uses of the programmable GPIOs.
S1 Sizes
Remote Control & Configuration
Using SCi Software
The S1 mixer is highly configurable and
has numerous options allowing the
mixer configuration to be tailored to your
requirements. Using the freely available
Sonifex SCi software, every parameter of the
mixer can be set up with ease.
S1-RCK Optional S1 9U
19” Rack Ears
Audio Specification for S1
Input / Output Impedances
Mic Input:
> 1k5Ω electronically balanced
Mono Line Input: > 20kΩ electronically balanced
Stereo Line Input: > 20kΩ electronically balanced
PGM Output:
< 50Ω electronically balanced
Monitor Outputs: < 75Ω unbalanced
AES Input/Output: 110Ω
S/PDIF Input/
BNC Wordclock 50Ω
Input / Output Gain Range
Mic Input:
Preset pot +21dB to +64dB ref -50dBu, TRIM pot ± 12dB
Mono Line
Switch 0dB to +10dB ref 0dBu,
TRIM pot ± 12dB
Switch 0dB to +10dB ref 0dBu,
Line Input:
TRIM pot ± 12dB
Telco Input:
Switch 0dB to +10dB ref 0dBu,
TRIM pot ± 12dB
Stereo Cleanfeed Switch 0dB to +10dB ref 0dBu, Input: TRIM pot ± 12dB
Digital Input:
0dBFS = +18dBu on input;
TRIM pot ± 12dB allowing 0dBu
to +24dBu
Digital Output:
0dBFS = +18dBu
Frequency Response
Mic Input:
40Hz to 20kHz –1dB, +0dB
Line Inputs:
20Hz to 20kHz –0.5dB, +0dB
20Hz to 20kHz –0.5dB, +0dB
RCA Inputs:
Noise (20Hz to 20kHz)
Mic Input E.I.N.: -130dB with 150Ω source.
Stereo Inputs -92dBu ref 0dB (fader down, no
-91dBu (fader down, one channel
-86 dBu (unity gain, one channel
-83 dBu (unity gain, two channels
Total Harmonic Distortion:
0.015% at 1kHz, 0dBu
0.015% at 10kHz, 0dBu
< -80dBu typically
LF: HF: Shelving at 100Hz ± 7dB
Shelving at 6.5kHz ± 7dB
Pan Range:
Balance Range:
Off/-3dB centre/off
± 6dB
Common Mode Rejection Ratio
Mic Input:
>60dB typically
Digital I/O
Sync Input Sample32kHz – 96kHz
Rate Range:
Output Sample 32kHz, 44.1kHz, 48kHz, & 96kHz
Rates: (Using Onboard Clock)
Output Sample 24 bit
Headphone >45 ohms, recommended 400
Output Load:
Maximum Output +26dBu balanced into 2k or greater
Rear Panel Switches
Phantom Power: +48V individual per mic input
Gain Switch:
+10dB per XLR balanced mono &
stereo input & EXT 1, EXT 2 inputs
Input & Output Connections
Analogue Inputs: 5 x Microphone XLR 3 pin sockets
2 x Mono line XLR 3 pin sockets
2 x Mono/stereo line combi XLR 3 pin sockets & 6.35mm stereo jack sockets
1 x Telco XLR 3 pin socket
5 x Stereo line pairs XLR 3 pin sockets
2 x Stere line pairs phono sockets
1 x Stereo cleanfeed pair XLR 3 pin sockets
1 x Stereo insert, 3.5mm jack socket
Digital Inputs:
2 x S/PDIF phono sockets,
2 x TOSLink optical connectors
Analogue Outputs:
2 x XLR 3 pin plug (balanced)
9-way ‘D’-type socket (balanced)
XLR 3 pin plug (balanced)
STEREO CLEANFD: 2 x XLR 3 pin plug (balanced)
Monitor Outputs: 6.35mm stereo jack sockets (2 x
Presenter, 1 x Guest, 1 x Monitor)
Digital Outputs: AES/EBU XLR 3 pin plug (balanced) or
S/PDIF phono socket.
Digital Sync Inputs:Wordclock on BNC, AES/EBU on XLR
socket and S/PDIF on phono socket.
EXT Inputs:
9-way ‘D’-type socket
Mono Remotes: 25-way ‘D’-type plug
Stereo Remotes: 25-way ‘D’-type plug
Meterbridge Port: 15-way ‘D’-type socket
Talkback Interface: 9-way ‘D’-type socket
RS232 Serial Port: 9-way ‘D’-type socket
Mains Input:
Filtered IEC, continuously rated
85-264VAC, 47-63Hz, 45w nominal, 50w peak
Fuse Rating:
Anti-surge fuse 2A 20 x 5mm
Equipment Type
S1 radio broadcast mixer
Physical Specification
44.5cm (W) x 40.0cm (D) x 15.6cm (H)
17.5” (W) x 15.75” (D) x 6.1” (H)
44.0cm, 17.3” (W) x 38.1cm, 15” (D) both dims +0.2cm, -0cm
Optional S1 9U rack ears.
For flowcharts of the mixer & more
detailed info, please go to the
Sonifex website:
Tel: +44 (0)1933 650 700 Fax: +44 (0)1933 650 726 Email: [email protected] Internet:
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF