advertisement
Model
WETS-2051.1101-1.1 ECOS ®
Electronic HET Flushometer and HET Water Closet
DESCRIPTION
Complete system with exposed, sensor activated, Sloan
ECOS ® electronic Flushometer and HET vitreous china water closet.
Flush Cycle
Model WETS 2051.1101-1.1
(1.1 gpf/4.2 Lpf)
Code: 20511101
SPECIFICATIONS
Quiet, exposed, battery powered, sensor activated, diaphragm type, ECOS ® closet Flushometer for either left or right hand supply with the following features:
Flushometer
• PERMEX ® Synthetic Rubber Diaphragm with Dual
Filtered Fixed Bypass
• Flex Tube Diaphragm designed for improved life and reduced maintenance
• ADA Compliant Sloan ECOS ® Battery Powered
Infrared Sensor for automatic “No Hands” operation
• Infrared Sensor with Multiple-focused, Lobular
Sensing Fields for high and low target detection
• Latching Solenoid Operator
• Engineered metal cover w/ replaceable lens window
• Courtesy Flush ® Override Button
• User Friendly Three (3) Second Flush Delay
• Four (4) Size AA Batteries factory installed
• “Low Battery” Flashing LED
• Infrared Sensor Range Adjustment Screw
• Initial Set-up Range Indicator Light (first 10 minutes)
• 1” IPS screwdriver Bak-Chek ® angle stop with Free
Spinning Vandal Resistant Stop Cap
• High Back Pressure vacuum breaker flush connection with one-piece bottom hex coupling nut
• Spud coupling and flange for 1½” top spud
• Sweat solder adapter w/ cover tube and cast wall flange with set screw
• High copper, low zinc brass castings for dezincification resistance
• Flush Accuracy Controlled by CID Technology
• Diaphragm, Stop Seat and Vacuum Breaker to be molded from PERMEX ® rubber compound for chloramine resistance
• Valve Body, Tailpiece and Control Stop shall be in conformance with ASTM Alloy Classification for
Semi-Red Brass. Valve shall be in compliance with the applicable sections of ASSE 1037.
Note: 1.1 gpf flushometer only recommended in new contruction installations or those where sufficient drain line carry can be assured. Alternatives include 1.28 gpf or 1.6 gpf flushometers.
NOTE:
Meets the American Disabilities Guidelines and ANSI A117.1 requirements when installed according to these requirements.
Plumbing System Requirements
• Minimum Operating Pressure: 25 PSI
• Maximum Fixture Operating Pressure: 80 PSI
• Minimum Operating Flow Rate: 18 GPM
Water Closet
• Wall hung vitreous china elongated bowl
• Siphon jet flushing action
• 1½” IPS top spud inlet
• 2 ⅛” fully glazed trapway diameter
• Integral flushing rim
• Water spot area 9 ½” x 8 ¼”
• Mounting hardware, carrier and toilet seat not included
• Recommended seats:
Bemis - 1955CT/1955SSCT & 2155CT/2155SSCT
Church - 295CT/295SSCT & 2155CT/2155SSCT
• Water closet shall be in compliance to the applicable sections of ASME A112.19.2/CSA B45.1
• Compliant with the Buy American Act when purchased as a combination
•
C u y
Am erican
A c o m plian t
•
C u y
Am erican o m plian
A c t
FEATURES
Automatic
The Flushometer operates by means of an infrared sensor that adapts to its surroundings. Once the user enters the sensor’s effective range and then steps away, the Flushometer Solenoid initiates the flushing cycle to flush the fixture.
Manual
Sloan ECOS ® Electronic Flushometers include a button design for manual use. The flush is controlled by the button.
Hygienic
User makes no physical contact with the Flushometer surface.
Economical
Automatic operation provides water usage savings over other flushing devices. Reduces maintenance and operation costs.
Practical
Solid state electronic circuitry assures years of dependable, trouble-free operation.
Warranty
3 year (limited)
This space for Architect/Engineer approval
Job Name
Model Specified
Variations Specified
Customer/Wholesaler
Contractor
Architect
The information contained in this document is subject to change without notice.
Date
Quantity
Sloan Valve Company
10500 Seymour Avenue
Franklin Park, IL 60131
Phone: 1-800-9-VALVE-9 (982-5839) or 1-847-671-4300
Fax: 1-800-447-8329 or 1-847-671-4380 www.sloanvalve.com
Copyright © 2014 Sloan Valve Company
WETS-2051.1101-1.1 11-14
Model
WETS-2051.1101-1.1 ECOS ®
Electronic HET Flushometer and HET Water Closet
OPERATION DESCRIPTION
Complete system with exposed, sensor activated, Sloan
ECOS ® electronic Flushometer and HET vitreous china water closet.
Flush Cycle
Model WETS 2051.1101-1.1
(1.1 gpf/4.2 Lpf)
Code: 20511101
ELECTRICAL SPECIFICATIONS
• Control Circuit
Solid state
6 VDC input
8 second arming delay
24 hour Sentinel Flush
• Sloan ECOS ® Sensor Type
Active infrared
• Sloan ECOS ® Sensor Range
Nominal 22” – 42” (559 mm – 1067 mm),
Adjustable ± 8” (203 mm)
• Battery Type
(4) AA Alkaline
• Battery Life
3 Years @ 4,000 flushes/month
• Indicator Lights
Range adjustment/low battery
• Sentinel Flush
Once every 72 hours after the last flush
1. A continuous, invisible light beam is emitted from the Sloan ECOS ®
Sensor.
2. As the user enters the beam’s effective range, 22” - 42”
(559 mm to 1067 mm), the beam is reflected into the
Scanner Window to activate the
Output Circuit. Once activated, the Output
Circuit continues in a “hold” mode for as long as the user remains within the effective range of the sensor. A full flush will automatically initiate when the user leaves.
3. Once a user is detected, the circuit automatically resets and is ready for the next user.
•
C u y
Am erican
A o m plian t c
• u
C y
Am erican
A c o m plian t
DIMENSIONS/ROUGH-IN
2 3/4”
(70 mm)
2 3/4"
(70 mm)
Finished
Wall
NOTE : All vitreous china dimensions shown in these drawings are nominal. Dimensions can vary within the tolerances established in the governing ASME A112.19.2/
CSA B45.1 standard. Please take this into consideration when planning rough-in and plumbing layouts.
11 1/2"
(292 mm)
26 3/4"
(679 mm)
14 ¼"
(362 mm)
Top of toilet
to floor
16" to 18"
(406 mm to
457 mm) for ADA
Finished
Floor
7 1/2"
(190 mm)
15” (381 mm) non- ADA
16"-18" (406-457 mm) ADA
Finished
Floor 9”
(229 mm)
Designed to meet ADA standards when bowl is 17" - 19" high including seat
4 1/2” (114 mm) non- ADA
5 1/2" - 7 1/2” (139 - 190 mm) ADA
SLOAN VALVE COMPANY • 10500 SEYMOUR AVENUE • FRANKLIN PARK, IL 60131
Phone: 1-800-9-VALVE-9 or 1-847-671-4300 • Fax: 1-800-447-8329 or 1-847-671-4380 • www.sloanvalve.com
Copyright © 2014 Sloan Valve Company WETS 2051.1101-1.1 11-14
2
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project