product catalog - Bticino Costa Rica

product catalog - Bticino Costa Rica
High Performance Structured
Cabling Products and Solutions
2013 14
PRODUCT CATALOG
HIGH PERFORM A N C E S TRU C TU RE D C A BL ING
PRO DUCTS & SO LU TI ON S
CONTENTS
Copper Workstation
26
P.
Copper Patch Panels
42
P.
Clarity® SNAP™ Pre-Terminated Copper Cabling System
54
P.
Copper Cords
60
P.
Industrial Solutions
68
P.
110 Cross Connect
70
P.
Physical Support
78
P.
OptiMo® Fiber Optic Solutions
142
P.
TechChoice® Solutions
184
P.
Adapters
194
P.
P.28
TracJack®
P.44
Clarity® Patch Panels
P.55
Clarity SNAP™
P.62
Clarity Patch Cords
P.68
Industrial Jacks
and Plates
P.72
Clarity 6 Category 6
110 Block Kits
P.80
Mighty Mo® Cable
Management Systems
P.145
OptiMo HD
Fiber Cabinets
P.186
Keystone Modules
P.195
Data Adapters
P.34
TracJack
Undercover Wall Plate
P.36
A/V Connectivity
P.38
Multimedia Workstations
P.45
Clarity 6 and Clarity 5E
Patch Panels
P.50
Special Application
Patch Panels
P.51
Shielded Patch Panels
P.56
Clarity SNAP™
Cable Assemblies
P.58
Clarity SNAP
Patch Panels
P.59
Clarity SNAP
Workstation Modules
P.64
Clarity Shielded
Patch Cords
P.66
Clarity 110 Patch Cords
P.67
Custom Assemblies
P.69
Industrial Jacks
P.69
Industrial Plates and
Surface Boxes
P.69
Industrial Patch Cords
P.73
19˝ Wide Rack
Mount 110 Panel Kits
P.75
110 Wall Mount
Blackboard Channels
P.77
Pre-Wired 66 Blocks
P.92
EuroLine
Cabinets
P.97
Mighty Mo
Cabinets
P.119
Horizontal Cable
Management Panels
P.158
Momentum® Modular
Pre-Terminated Systems
P.172
Field Installable Connectors
P.181
Fiber Optic
Workstation Systems
P.188
TechChoice® Faceplates
P.190
TechChoice Patch Panels
P.191
TechChoice Patch Cords
P.195
Gender Changers
High Performance
Network Infrastructure
Solutions.
No one offers more ways to connect than Ortronics®. Whether you need
to run copper or fiber…under floors, behind walls, or in ceilings…for
a LAN, SAN or data center…with a distributed, centralized or zoned
architecture, Ortronics connects you to the people and resources that
matter most. We understand the impact of structured cabling and
physical support on networks, and design systems to ensure yours
connect flawlessly.
2
Ortronics, headquartered in
New London, Connecticut, USA,
is a global leader in high performance network infrastructure
solutions,
offering a complete range of Category 5e, 6 and 6a copper and
fiber optic
connectivity solutions, as well as
Layer Zero® physical support.
Ortronics is a subsidiary of
Legrand (www.legrandelectric.
com), the
global specialist in products and
systems for electrical installations
and information networks where
people live and work. Legrand is
actively expanding its presence
in fast-growing geographical
zones and market segments that
include lighting controls, energy
savings and home automation.
Ortronics offers
outstanding support
to make the journey
from designing and
specifying a system
to installing and
certifying it easy,
productive and hassle-free. Among
highlights for our
support:
A GLOBAL account team
dedicated to support your
specific needs every step
of the way.
LONG-TERM relationships
with global distributors
to ensure smooth logistic
planning and on-time deliveries.
INDUSTRY-LEADING
warranties guaranteeing
our system will perform
to specification for any
application designed to
run on it.
CERTIFIED trainers and
technical support
A NETWORK of certified
contractors, who undergo
comprehensive training by Ortronics to acquire the skills
to install our systems.
3
Ortronics Energy Efficiency:
a major criterion for high
performance, sustainable
environments.
Energy Efficiency is now an essential part
of every Legrand project. It has even
become a major factor for the success of
projects. As the global specialist in electrical
and digital building infrastructures, Legrand
is offering more solutions for improved
control of electricity to reduce consumption
and contribute towards supplying high
quality energy.
Ortronics is committed to building high
quality products which are more considerate
of their environmental impact, help save
energy and, in the end, mean less money
spent maintaining these products. This is
all made by a company whose corporate
behavior matches the type of sustainable
products Ortronics strives to make. In the
beginning, think about Ortronics…in the
end, realize less impact on the environment.
4
CONCERN FOR THE
ENVIRONMENT TOUCHES
EVERYTHING WE DO
Ortronics, together with the other
Legrand companies, is dedicated to
the continued integration of sustainable
practices into our business processes
be environmentally responsible while
helping our customers do the same.
1
ISO 14001 Registered Facilities since 2009
2
RoHS Compliance Products from Ortronics meet
current RoHS compliance guidelines.* In addition,
Ortronics considers RoHS guidelines in the design
and material selection for all new products.
*except legacy 110 blocks
LAYER ZERO® – THE INFRASTRUCTURE
LAYER, STABILIZES THE NETWORK
Layer Zero is the proposed new foundation for the ISO/OSI
model. Layer Zero addresses the critical role that the physical infrastructure plays in network performance. Layer Zero
solutions encompass the entire physical infrastructure that
supports your network, including aisle containment, racks,
cabinets, advanced cable management, pathway solutions,
underfloor and overhead systems. By recognizing the importance of the underlying infrastructure layer and emphasizing
best practices in pathway and physical support design, a
new level of efficiency can be created for the network.
BUILDING ENERGY EFFICIENCY
Ortronics supports the objectives of the U.S. Green Building Council, an organization whose mission is to transform the way
buildings and communities are designed, built and operated, enabling an environmentally and socially responsible, healthy,
and prosperous environment that improves the quality of life. Ortronics has been a member of the USGBC since 2004.
THE ENERGY EFFICIENCY SOLUTION
RACKS The Ortronics® Mighty Mo® 10 is the first rack to combine advanced
cable management with superior airflow. Designed to maximize the airflow of
active equipment, the Mighty Mo 10 features patented honeycomb side rails
that allow ventilated air to be exhausted.
CABINETS The Ortronics Mighty Mo cabinet offers the same advanced cable
management and airflow properties of our rack, designed into in a secure,
fully configurable enclosure. Start with a frame and then select mounting rails,
doors, side and top panels, vertical managers and accessories.
AIR CONTROL In addition to the traditional racks and cabinets that are
the backbone of Ortronics physical support solutions, Ortronics also offers
Mighty Mo Air Control containment solutions. Together, Ortronics physical infrastructure and containment products provide complete thermal management
solutions to direct heat and airflow in the data center, resulting in improved
cooling that significantly increases energy savings.
Ortronics is the leader
in passive airflow control,
with patented physical
infrastructure solutions
that properly manage
heat and airflow.
The Mighty Mo 10
Advanced Cable Management
System
can eliminate the
additional 15 to 20W
of power that typical
network equipment
fans consume,
making for a more
energy-efficient data
center with reduced
power consumption
and energy costs.
5
TRAINING & CERTIFICATION
For course
descriptions
and schedules,
please use the
QR code or
visit education at
www.ortronics.com
Ortronics offers comprehensive
certification programs to ensure the best
project design and installation services.
CERTIFICATION
“Certification” is such an important component
of a successful installation that is often
overlooked. The better the design, the products, and the installation, the higher return-oninvestment the customer will receive. Ortronics
has developed comprehensive certification
programs to ensure the best project design
and installation services.
Legrand Design Professional
Program (LDP)
A comprehensive engineering program
developed specifically for Architects,
Designers, Engineers, and Technology
Consultants
LDP is designed to empower participants
to deliver high quality, leading edge
telecommunications system designs and
specifications by providing the highest level
of technology support.
TRAINING
Protecting the investment in a structured cabling system is one
of the main concerns of customers today. The structured cabling
system provides a necessary foundation for a network to work effectively. Problems identified when the network becomes active can
be extremely costly to correct and may effect mission-critical system
networks.
Ortronics addresses installation practices:
By providing a select group of Certified Contractors, globally, who
guarantee their workmanship
■■
■■
By training the best consultants, architects and design engineers
■■ By providing education for the customer - information on today’s
leading technology and the latest standards
6
■■ All LDP participants must attend at least
one annual seminar, to ensure the most
current knowledge of the latest
technology including:
—— Industry
standards (IEEE, TIA, ISO/IEC)
—— Specification
—— Layer
writing practices
Zero® design
—— Emerging
technologies
■■ LDP technology seminar participants also
receive BICSI CEC credits.
CERTIFIED CONTRACTOR PROGRAM
Only the best contractors in the industry are
selected for our certified contractor program.
At Ortronics, we only consider
the best contractors to be part
of our program. Even within our
program, there is differentiation.
To be considered for the top tier,
Certified Installer Plus-Enterprise
Solutions Partners (CIP-ESP),
the contractor
company must demonstrate the
following:
■■ Precisely duplicate the customer’s
standard design, product choices
and
communication protocols
■■ Work closely with the distributor of
choice for seamless logistics
■■
CERTIFIED CONTRACTOR PROGRAM
Ortronics has the most selective program worldwide with the best
contractors and installers in the industry participating in this exclusive
program. Each certified contractor company must meet and maintain
the minimum training requirements:
■■
1 project manager attends a 2-day management
■■
certification course
RCDD on staff
■■ Constantly search for improved
process opportunities
Handle all channel disputes internally
and not jeopardize the installation or
the end-user
■■
■■ 30% of field technicians successfully complete a 1-day copper
and fiber optics installation and eCertification course
Each certified contractor company is evaluated every 12 months
to ensure Ortronics is working with the best contractor in the industry.
7
CERTIFIED CONTRACTOR PROGRAM
WHY CHOOSE AN ORTRONICS CERTIFIED CONTRACTOR?
In addition to purchasing a product
Only an Ortronics Certified Contractor
support applications developed
Ortronics’ exact specifications,
Ortronics stands behind all extended
IEEE or ATM Forum. The products
designed and manufactured to
quality installation practices maximize
the performance of a network.
Selecting the best trained contractor
will prevent performance degradation
due to poor installation practices.
can provide extended warranties.
warranties.
Only a contractor certified
by Ortronics can offer our
Extended Warranties
An Ortronics Certified Contractor
can provide the quality installation
that will maximize structured cabling
system performance with quality
customer?
assurance provided through
An Ortronics warranty ensures
guarantees.
free from defects in materials and
extended product and performance
8
Why is a warranty important to the
that the installed products are
workmanship and will
by industry organizations like
are warranted to meet or exceed
the specifications of standards
organizations including, but not
limited to, ISO/IEC and TIA. Under the
extended warranties, products are
repaired or replaced and labor is paid
by Ortronics. This offers customers
the security of knowing they will
receive the best structured cabling
system
and that the system will maintain its
performance integrity for years
to come.
ORTRONICS WARRANTY PROGRAM
Basic Product Warranty
Guarantees product repair or
replacement for five (5) years
from the time of purchase,
excluding labor costs
■■
■■
Basic warranty issued to the
end user on Ortronics
connectivity products, racks,
cable management and fiber
optic products when purchased
from an authorized distributor
Extended Product Warranty
Issued when an Ortronics
certified
contractor installs Ortronics
connectivity with approved
manufacturer’s cable
■■
■■
All requirements of the Ortronics
certification and warranty
program must be met, which
includes using only Ortronics
patch cords
The project must be registered
for warranty and test data must
be submitted to Ortronics
■■
■■
Clarity® Warranty
Issued when an Ortronics
certified
contractor installs Ortronics
connectivity with approved
manufacturer’s cable
Ortronics also offers the best
warranty in the industry, the
Clarity 25 year warranty. To qualify
for a Clarity warranty, the structured
cabling solution must be comprised
of defined Ortronics connectivity
and cable (Specific products are
listed on Clarity data sheets).
Guarantees product repair or
replacement including labor
costs
■■
■■
All requirements of the Ortronics
certification and warranty
program must be met, which
includes registering the project
for warranty
Applications Assurance Warranty
Guarantees product repair or
replacement including labor
costs
■■
■■
The Clarity warranty provides
the most extensive guarantee
The Clarity Warranty therefore provides
the most extensive guarantee including:
dB headroom over the TIA performance
specifications for both Category 5e
and Category 6, verifiable by a
handheld tester
■■
Support for all current and future
applications for the specified cabling
category in accordance with the
current TIA-568 version
■■
Performance guarantees for 2, 3 or
4-connector channels up to
100 meters
■■
Guarantee that the channel will be
free
from bit errors caused by the Clarity
structured cabling system
■■
Cost of labor to repair or replace
defective product
■■
A 25-year warranty extended directly
to the end-user
■■
For complete warranty statements
please visit www.ortronics.com.
Applications Assurance
guarantees the performance of
applications for the specified
cabling category in accordance
with the current TIA-568 version.
NOTE: The above mentioned warranties cover passive products only. Warranties do not cover
TracReady and other active products.
9
Data Center/SA
SYSTEMS SOLUTIONS FOR
Mission-critical data centers and SANs require reliable, flexible and scalable infrastructures with guaranteed performance.
Ortronics® offers a complete selection of high density copper and fiber optic structured cabling solutions as well as cable
management and pathway systems to support these demands.
01
02
04
05
07
06
03
10
A Ns
Clarity® FTP Patch Panels
Clarity FTP Patch Cords
02
OptiMo Field-Installable
Fiber Connectors
OptiMo Fiber Patch Cords
Momentum® 3 Modular
MTP®/MPO-based cassettes
03
OptiMo® Raised Floor
Patch Panels
04
Clarity® UTP Patch Panels
Clarity UTP Patch Cords
05
Mighty Mo® 10
Server Rack
06
Mighty Mo 10 Advanced
Cable Management System
07
PRODUCTS & SOLUTIONS FOR THE DATA CENTER/SANs
01
01
Mighty Mo Cabinet
11
LAN/Enterprise
SYSTEMS SOLUTIONS FOR
Whether it is copper, fiber, A/V or cable management, from building entrance to desktop, Ortronics® offers more ways to
connect to keep business moving - seamlessly.
06
05
07
02
01
03
04
12
e
01
02
OptiMo® FC Series Fiber
Cabinets with Adapter
Panels and Patch Cords
03
Mighty Mo 110D Frames
04
Mighty Mo Server Rack
Clarity® TracJack®
06
Fib-or-Cop
Workstation Outlet
07
A/V Workstation Connectivity
PRODUCTS & SOLUTIONS FOR THE LAN/ENTERPRISE
Mighty Mo Advanced Cable
Management System with
Clarity UTP Patch Panels
and Patch Cords
05
13
Open Office
SYSTEMS SOLUTIONS FOR
Whether it is copper, fiber, A/V or cable management, from building entrance to desktop, Ortronics® offers more ways to connect
to keep business moving - seamlessly.
03
03
01
14
02
04
Mighty Mo® Advanced
Cable Management System
02
Clarity® TracJack®
03
A/V Workstation Connectivity
04
PRODUCTS & SOLUTIONS FOR THE OPEN OFFICE
01
Mighty Mo
Wall Mount Cabinet
15
Education
SYSTEMS SOLUTIONS FOR
Ortronics® has all the integrated connectivity and cable management solutions needed for educational institutions who are taking
advantage of new converging technologies such as distance learning, distributed computing, interactive teaching tools, A/V
connectivity and IP telephony.
02
04
03
05
06
07
01
08
16
Clarity® TracJack® Modules
Clarity Surface Mount
Boxes
02
TracJack Undercover
Wall Plates
03
Mighty Mo® 6 Advanced
Cable Management System
04
A/V Workstation
Connectivity
05
Clarity® UTP Patch Panels
Clarity UTP Patch Cords
06
OptiMo® FC Series
Fiber Cabinets
OptiMo Fiber Adapter
Panels and Patch Cords
07
Mighty Mo 110D Frames
08
PRODUCTS & SOLUTIONS FOR THE DATA CENTER/SANs
01
Clarity TracJack Outlets
17
Healthcare
SYSTEMS SOLUTIONS FOR
Healthcare facilities need a high performance network when adopting technologies for applications such as high resolution
imaging, patient record management, and remote diagnostics and surgery. Ortronics® offers the advanced cable management
and structured cabling solutions needed for these high bandwidth applications.
02
01
03
08
02
07
06
05
05
18
04
Mighty Mo 10 Advanced
Cable Management
System
02
OptiMo® FC Series Fiber
Cabinets with Adapter
Panels and Patch Cords
03
Clarity® UTP Patch Panels
Clarity UTP Patch Cords
04
Mighty Mo 110D Frames
05
A/V Workstation Connectivity
06
TracJack® Stainless Steel
Faceplates
07
Fiber Optic Surface
Mount Cabinets
08
PRODUCTS & SOLUTIONS FOR THE LAN/ENTERPRISE
01
Connectivity Solutions for
IP Network Security Devices
19
Retail
SYSTEMS SOLUTIONS FOR
Ortronics® knows that retailers are integrating IT into their business strategies. Ortronics offers all the connectivity and cable management for standardization at store locations. Customized kits with everything from closet to workstation facilitate rapid deployment at every location.
02
04
02
01
02
01
01
02
01
01
02
03
05
01
01
20
Clarity® TracJack® Outlets
02
Connectivity Solutions
for IP Network
Security Devices
03
Mighty Mo® 6 Advanced
Cable Management System
04
Clarity Surface
Mount Boxes
05
Momentum® Modular
MTP®/MPO-based Cassettes
Clarity UTP Patch Panels
Clarity PoE Patch Panels
PRODUCTS & SOLUTIONS FOR THE DATA CENTER/SANs
01
21
Financial
SYSTEMS SOLUTIONS FOR
Financial institutions require 24/7 real-time networks that are fast, reliable, and secure to keep the global economy moving.
Ortronics® fiber optic and shielded copper systems are ideal for securing transactions and other confidential information.
02
08
07
05
04
06
01
03
22
Clarity® TracJack® Outlets
02
Mighty Mo 110D Frames
03
Connectivity Solutions for IP
Network Security Devices
04
Mighty Mo® 10 Advanced
Cable Management System
05
A/V Workstation Connectivity
06
OptiMo® FC Series
Fiber Cabinets
OptiMo Fiber Adapter
Panels and Patch Cords
07
Clarity UTP Patch Panels
Clarity PoE Patch Panels
Clarity UTP Patch Cords
08
PRODUCTS & SOLUTIONS FOR THE DATA CENTER/SANs
01
TracJack Furniture Bezels
23
Layer Zero - The Infrastructure Layer™
For more information on
Layer Zero Solutions,
scan the QR code.
Revolutionize
your network
from the ground up
For maximum network efficiency, start at the foundation.
Layer Zero provides a new foundation for the OSI model to
address the critical role that infrastructure plays in network
performance. The right solutions at Layer Zero can reduce
power consumption and cooling costs, reduce the risk of
equipment failure and improve overall system performance.
Contact your Ortronics representative to learn more about the
impact of Layer Zero on your data center or visit us at www.
ortronics.com/layerzero.
24
COPPER CONNECTIVITY
26
P.
COPPER
WORKSTATION
42
P.
COPPER
PATCH PANELS
54
P.
SNAP PRE-TERMINATED
CABLING SYSTEM
60
P.
COPPER
CORDS
68
P.
INDUSTRIAL
SOLUTIONS
70
P.
110 CROSS
CONNECT
25
H IGH P E RF OR M A N C E S T R U C T U R E D C A B LIN G
P ROD UCT S & S O L U T I O N S
COPPER CONNECTIVITY
Copper
Workstation
TracJack
A|V
Connectivity
Evolving networks demand the technology to support elevated
performance requirements. Reality necessitates this elevated
performance be delivered via a design that will meet specific
mechanical, environmental and aesthetic workstation
Multimedia
Workstations
requirements. Ortronics provides industry leading performance
with the front loading footprint of Clarity® TracJack® modules.
F E AT U R E D P R O D U C T S
Clarity
6A/10G
TracJack
28
P.
P.28
Clarity
6A/10G
TracJacks
P.28
Clarity 6 and
Clarity 5E Center
Tuned, Enhanced
Category 6 and
5e TracJacks
P.29
Additional
TracJack
Modules for
Applications and
Other Media
P.30
TracJack
Adapters
for Bticino
P.30
Programme
Mosaic
Adapters
for Bticino
P.31
TracJack
Adapters
for British
Standard
P.32
Single Gang
and Double
Gang TracJack
Faceplates
P.34
Surface
Housings for
TracJack
P.35
TracJack
Furniture
Bezels
P.36
TracJack
Solutions
P.37
Keystone
Solutions
P.38
Fib-or-Cop II
P.39
MUTOA
Mac-Pak
P.39
Multimedia
Outlet (MMO)
TracJack
Undercover
Wallplate
Fib-or-Cop II
P.
P.
34
38
TRACJACK®
Clarity ® Unshielded Modules
NOTE: All Ortronics product dimensions are listed by width, height and depth unless specified otherwise.
TracJack modules combine the ease and reliability of a front-loading individual jack
with preferred 110 termination and offer universal T568A/B wiring.
OR-TJ6A
Clarity 6A/10G
Category 6a TracJacks
Clarity 6A TracJacks now offer the
elevated performance of quad reactance,
minimizing internal crosstalk and reducing
the injection of common mode noise, a
significant source of alien crosstalk. These
connectors work with Clarity 10G patch
cords to provide a nearly transparent
signal path for enhanced signal-to-noise
(internal and alien) performance.
PART NO.
DESCRIPTION
OR-TJ6A
Clarity 6A/10G, 180° exit, fog white
NOTE: T568A/B wiring.
Clarity 6A jacks are available in these colors: -00=black, -36=blue, -42=red,
-43=orange, -44=yellow, -45=green, -68=Wiremold® gray, -88=white,
-99=Wiremold ivory. Add tailcode to end of part number.
These front-loading jacks are iconcompatible and can be used in any
TracJack workstation outlet. Meets
TIA 568C.2 Category 6a component
specifications.
OR-TJ600
OR-TJ645
Clarity 6 and Clarity 5E
Center Tuned, Enhanced
Category 6 and 5e TracJacks
Ortronics Clarity TracJacks feature the
improved performance of center tuned
Category 6 or 5e connector technology.
Enhanced IDC designs make it easier
to terminate while reducing the size of
the jack.
PART NO.
DESCRIPTION
OR-TJ600
Clarity 6 jack, 8-position, 180° exit, fog white
OR-TJ645
Clarity 6 jack, 8-position, 45° exit, fog white
OR-TJ5E00
Clarity 5E jack, 8-position, 180° exit, fog white
OR-TJ5E45
Clarity 5E jack, 8-position, 45° exit, fog white
NOTE: T568A/B wiring. Icon compatible.
See color chart below for available colors.
OR-TJ5E00
fog
white
-00
-13
-36
-42
-43
-44
-45
WM
OR-TJ5E45
-68
WM
-78
-88
-99
WM
WM
WM
ivory
-22
-23
-24
-25
-26
-27
NOTE: For colors, add one of the following suffixes: -00 = WireMold black,
-13 = electrical ivory, -22 = light red, -23 = light orange, -24 = light yellow,
-25 = light green, -26 = light blue, -27 = purple, -36 = blue, -42 = red, -43 = orange,
-44 = yellow, -45 = green, -68 = Wiremold light gray, -78 = Wiremold gray,
-88 = Wiremold cloud white, -99 = Wiremold ivory.
NOTE: Clarity TJ5E00 and TJ600 jacks are available in all colors listed above.
The Clarity TJ5E45 and TJ645 are not available in colors 22-27. WM indicates
Wiremold color match. These color samples correspond with the tail codes
inserted at the end of Ortronics part numbers (ex: OR-TJ600-45). Fog white is
standard, requiring no tail code. Consult sales for availability and other colors.
28
TRACJACK®
Clarity ® Shielded Modules
Clarity Shielded TracJacks meet TIA Category 6a, Category 6 and Category 5e
component specifications and are precisely tuned to the terminated plug values
of Clarity patch cords for optimum performance that is field measurable in the
channel. Clarity uses dual reactance technology to enhance signal-to-noise ratio,
providing a nearly transparent signal path.
n
n
n
n
n
n
n
n
n
n
Exceeds ISO 11801 2nd edition including EN50173 2nd edition
Meets IEC 60603-7-5 2nd edition (draft) specifications
ETL 3rd party component tested and verified
Easy lace IDC housing accepts larger conductors
Easy to follow universal wiring label—quick and user-friendly
Fits in all TracJack plates and housings
Icon compatible, 6A, C6 and 5E marking on jack face
Backward compatible to shielded Category 3, 5, 5e and 6
Center tuned connectivity design
Compatible with 110 impact tool
Clarity 6 and Clarity 5E Shielded Category 6a, 6 and 5e TracJacks
OR-TJS600
PART NO.
DESCRIPTION
OR-TJS6A
Clarity 6, Category 6a shielded jack, 8-position,
180° exit
OR-TJS600
Clarity 6, Category 6 shielded jack, 8-position,
180° exit
OR-TJS5E00
Clarity 5E, Category 5e shielded jack, 8-position,
180° exit
NOTE: T568A/B wiring.
TRACJACK
See page 181 for
Additional Modules
Fiber TracJack modules
Additional TracJack Modules
OR-63730003
OR-63700005
PART NO.
DESCRIPTION
OR-63730003
Category 3 jack, 8-position, 180° exit, T568A/B
wiring. Icon compatible
OR-63700005*
RJ25 jack, 6-position, 180° exit, USOC wiring.
Icon compatible
NOTE: Standard color for TracJack modules is fog white.
* Indicates also available in -99 Wiremold ivory and -88 white.
Contact Ortronics sales department for other colors.
29
TRACJACK®
Adapters
NOTE: All Ortronics product dimensions are listed by width, height and depth unless specified otherwise.
OR-42100022
TracJack Adapters
for Bticino
A range of adapter/bezels designed to fit
Bticino (three main face-plate offerings –
Magic, Living International, and Light),
Vimar and Gewiss. Each of these
adapters/bezels hold one TracJack.
OR-40300590
PART NO.
DESCRIPTION
OR-42100022
Magic adapter, holds one TracJack,
white, 10 pack
OR-40300590
Living International adapter, holds one
TracJack, black, 10 pack
OR-40300591
Light adapter, holds one TracJack, white, 10 pack
ADAPT MATIX
Matix adapter, holds one TracJack, white, 10 pack
PART NO.
DESCRIPTION
OR-FPK1TJ
22.5 x 45mm for TracJack, flush single, 10 pack
OR-FPK2TJ
45 x 45mm for TracJack, flush double, 10 pack
OR-FPIK2TJ
22.5 x 45mm angled for TracJack, no shutter
indented single, 10 pack
OR-FPK1PJ
22.5 x 45mm for rear load with shutter,
flush single, 10 pack
OR-FPK2PJ
45 x 45mm for rear load with shutter,
flush double, 10 pack
OR-FPIK2PJ
22.5 x 45mm angled for rear load, no shutter
indented single, 10 pack
OR-40300591
OR-FPK2TJ
Programme Mosaic™
Adapters for Bticino
Programme Mosaic adaptors are all
rear load and come in 2 varieties, flush
and indented.
30
TRACJACK®
Adapters for British Standard
NOTE: All Ortronics product dimensions are listed by width, height and depth unless specified otherwise.
OR-42100018P-88
TracJack Adapters for
British Standard
Ortronics adapters hold 1 TracJack
RJ 45 module (shielded or unshielded).
The internal shutter mechanism protects
unused ports from contamination.
OR-42100019P-88
PART NO.
DESCRIPTION
OR-42100018P-88 TracJack adapter, 6C single bezel
OR-42100019P-88 TracJack adapter 6Ce
Standard color: White.
TRACJACK
Faceplates for British Standard
OR-40300746P-88
Synergy TracJack
Faceplates for British
Standard
Synergy Faceplates for British Standard.
PART NO.
DESCRIPTION
OR-40300745P-88 1 TracJack rear load Synergy Faceplate
OR-40300746P-88 2 TracJack rear load Synergy Faceplate
OR-40300746P-88 4 TracJack rear load Synergy Faceplate
OR-40300460P-88
TracJack Faceplates for
British Standard
Single gang plastic TracJack Faceplate for
British Standard Flush boxes. Dimensions
(in mm): 86.0 W x 86.0 H x 10.0 D
PART NO.
DESCRIPTION
OR-40300460P-88 Holds two TracJacks
OR-40300279P-88 Holds four TracJacks
Standard color: White.
31
TRACJACK®
Faceplates
NOTE: All Ortronics product dimensions are listed by width, height and depth unless specified otherwise.
Ortronics offers a full range of TracJack faceplates in plastic or stainless steel, with a
variety of port capacities to match your workstation applications. All TracJack plates
offer recessed label fields and slotted screw holes to adjust alignment. They are ruggedly
constructed from high impact thermo-plastic 94V-0 rated to ensure long life. Two to 12port plastic wall plates now include the ability to rear-load TracJack modules.
Single Gang Plastic TracJack Faceplates
OR-40300549
OR-40300546
OR-40300548
OR-40300547
OR-40300545
PART NO.
DESCRIPTION
OR-40300549
Holds one TracJack, 2.75˝ x 4.5˝
OR-40300548
Holds two TracJacks, 2.75˝ x 4.5˝
OR-40300547
Holds three TracJacks, 2.75˝ x 4.5˝
OR-40300546
Holds four TracJacks, 2.75˝ x 4.5˝
OR-40300545
Holds six TracJacks, 2.75˝ x 4.5˝
NOTE: Standard color for plastic TracJack faceplates is fog white. For electrical
ivory add -13, for white add -88 and for Wiremold® ivory add -99 to end of part
number. For other colors, contact sales.
Single Gang Stainless Steel TracJack Faceplates
OR-403STJ11
OR-403STJ14
OR-403STJ12
OR-403STJ13
OR-403STJ16
PART NO.
DESCRIPTION
OR-403STJ11
Holds one TracJack, 2.75˝ x 4.5˝
OR-403STJ12
Holds two TracJacks, 2.75˝ x 4.5˝
OR-403STJ13
Holds three TracJacks, 2.75˝ x 4.5˝
OR-403STJ14
Holds four TracJacks, 2.75˝ x 4.5˝
OR-403STJ16
Holds six TracJacks, 2.75˝ x 4.5˝
PART NO.
DESCRIPTION
OR-40300555
Holds six TracJacks, 4.5˝ x 4.5˝
OR-40300554
Holds eight TracJacks, 4.5˝ x 4.5˝˝
OR-40300620
Holds twelve TracJacks, 4.5˝ x 4.5˝
Double Gang Plastic TracJack Faceplates
OR-40300555
OR-40300554
OR-40300620
NOTE: Standard color for plastic TracJack faceplates is fog white.
For other colors, contact sales.
Double Gang Stainless Steel TracJack Faceplates
OR-403STJ28
32
OR-403STJ212
PART NO.
DESCRIPTION
OR-403STJ28
Holds eight TracJacks, 4.5˝ x 4.5˝
OR-403STJ212
Holds twelve TracJacks, 4.5˝ x 4.5˝˝
TRACJACK®
Plate Mountings
NOTE: All Ortronics product dimensions are listed by width, height and depth unless specified otherwise.
Ortronics offers TracJack mountings in both the 106-Type duplex footprint or the
Stylistics® rectangular (GFCI) footprint, with a variety of port capacities to match your
workstation applications. These two footprints are common to Wiremold® and many
other industry standard raceway, furniture, pedestals and floor boxes. Ortronics also
offers plastic cover plates with recessed label fields and slotted screw holes to adjust
alignment. All parts are ruggedly constructed from high impact thermo-plastic 94V-0
rated to ensure long life.
106-Type TracJack Frames
OR-40800017
OR-40800018
OR-40800019
PART NO.
DESCRIPTION
OR-40800017*
Holds two TracJacks
OR-40800018
Holds three TracJacks
OR-40800019*
Holds four TracJacks
NOTE: Standard color is fog white.
* Indicates also available in -99 Wiremold ivory and -88 white.
106-Type Plastic Cover Plates
OR-40300255
OR-40300256
PART NO.
DESCRIPTION
OR-40300255
Single gang cover, 2.75˝ x 4.5˝
OR-40300256
Double gang cover, 4.5˝ x 4.5˝
NOTE: Standard color for 106-Type Cover Plate is fog white. For other colors,
contact sales.
Stylistics TracJack Frames
OR-41900017
OR-41900018
PART NO.
DESCRIPTION
OR-41900017*
Holds three TracJacks
OR-41900018*
Holds four TracJacks
NOTE: Standard color is fog white.
* Indicates also available in -99 Wiremold ivory.
Stylistics Plastic Cover Plates
OR-40300270
OR-40300271
PART NO.
DESCRIPTION
OR-40300270
Single gang cover, 2.75˝ x 4.5˝
OR-40300271
Double gang cover, 4.5˝ x 4.5˝
NOTE: Standard color for Stylistics Cover Plates is fog white.
For other colors, contact sales.
Single Gang Stainless Steel TracJack Faceplates with Phone Studs
OR-403STJ1WP
PART NO.
DESCRIPTION
OR-403STJ1WP
Holds one TracJack, 2.75˝ x 4.5˝
NOTE : Not compatible with 2554 series wall phones.
33
TRACJACK®
Undercover Wall Plate
NOTE: All Ortronics product dimensions are listed by width, height and depth unless specified otherwise.
OR-403TJUSG
TracJack Undercover
Wall Plate
The TracJack Undercover provides a
protective housing for four center mount
TracJacks with the ability to add an
additional copper or fiber TracJack out the
bottom. This single gang housing offers
increased protection for connections in
tamper sensitive environments.
PART NO.
DESCRIPTION
OR-403TJUSG
Single gang protective housing holds up to five
TracJack modules, 5.58˝H x 2.25˝ D x 2.74˝W
TRACJACK
Surface Mount Boxes
Ortronics TracJack surface mount boxes are available to house from two to six TracJacks.
Bases are easily installed with supplied screws or double-sided adhesive. Snap-on
covers have recessed label fields. Boxes are ruggedly constructed from high impact
thermo-plastic 94V-0 rated. Standard color is fog white. Compatible with Wiremold
2700, 2800 and 2900 raceway series.
Surface Housings for TracJack
OR-404TJ2
OR-404TJ4
PART NO.
DESCRIPTION
OR-404TJ2
Holds two TracJacks, 2.59˝ x 2.27˝ x 1.20˝
OR-404TJ4
OR-404TJ2X2
OR-404TJ6
OR-404TJ2X2
Holds four TracJacks, 4.80˝ x 3.6˝ x 1.16˝
NOTE: Can mount directly to single gang recessed wall
boxes. Includes one TracJack blank.
Holds four TracJacks, jacks exit from both sides,
4.0˝ x 2.42˝ x 1.16˝
Holds six TracJacks, 6.98˝ x 4.33˝ x 1.16˝
OR-404TJ6
34
NOTE: Includes internal storage ring for fiber and two
TracJack blanks. Can mount directly to single or double
gang recessed wall boxes.
TRACJACK®
Furniture Bezels
NOTE: All Ortronics product dimensions are listed by width, height and depth unless specified otherwise.
Ortronics offers TracJack plates for most furniture systems. Plates easily snap
mount into furniture, requiring no special tools. Plates are ruggedly constructed
from high impact thermo-plastic 94V-0 rated.
IMPORTANT: Measure furniture openings to determine the correct plate.
Furniture Plates for TracJack
OR-40300577-00
OR-40300633-00*
OR-40700071
OR-40300576-00
OR-42100009
OR-40700072*
OR-40300575
OR-42100054-00
OR-40700073*
PART NO.
DESCRIPTION
OR-40300577
Holds four TracJacks, fits Herman Miller Beltline
furniture openings 2.35˝ x 3.41˝ (+.015) for .125˝
thick material, fog white
OR-40300577-00
Black
OR-40300576
Holds six TracJacks, fits Herman Miller Beltline
furniture openings 2.35˝ x 3.41˝ (+.015) for .125˝
thick material, fog white
OR-40300576-00
Black
OR-40300575
Holds six TracJacks, fits Herman Miller Baseline
furniture openings 1.89˝ x 2.99˝ (+.015) for .063˝
thick material, fog white
OR-40300575-00
Black
OR-40300633*
Holds four TracJacks, two-piece base and cover,
adjustable to fit a range of common furniture
openings (2.67˝–2.75˝ x 1.34˝–1.41˝) for .065˝ thick
material, fog white
OR-40300633-00*
Adapter plate, front-loads three TracJacks,
fog white
OR-42100009-00
Black
OR-42100054
Adapter plate, rear-loads three TracJacks, fog
white, five pack
OR-42100054-00
Black, five pack
OR-40700071
.125˝ deep bezel mounts adapter plates above
to 2.71˝ x 1.38˝ (+.035) opening, fog white
OR-40700071-00
Black
OR-40700072*
.625˝ deep bezel mounts adapter plates above to
2.71˝ x 1.38˝ (+.035) opening, fog white
OR-40700072-00*
Black
OR-40700073*
1.0˝ deep bezel mounts adapter plates above to
2.71˝ x 1.38˝ (+.035) opening, fog white
OR-40700073-00*
Black
*Have recessed label fields.
35
AUDIO | VIDEO CONNECTIVITY
TracJack® Solutions
TracJack Solutions
PART NO.
DESCRIPTION
TracJack footprint is front loading and supports a number
of A/V and data modules. It’s ideal for combining A/V with
our high performance Clarity® workstation products.
OR-63700058
RCA red, female to female
OR-63700086
RCA green, female to female
OR-63700085
RCA blue, female to female
OR-63700059
RCA white, female to female
OR-63700060
RCA yellow, female to female
OR-63700071
RCA red to 110
OR-63700083
RCA green to 110
OR-63700084
RCA blue to 110
OR-63700070
RCA white to 110
OR-63700047
RCA yellow to 110
OR-63700046
Pair of RCA to 110 (one red, one black), 180° exit
OR-63700025
S-Video to 110
OR-63700069
3.5mm stereo jack
OR-63700023
BNC 75 ohm, female to female
OR-63700006
F Conn 75 ohm, female to female
OR-63700087
F Conn 75 ohm, recessed, female to female
OR-63700021
Speaker term set, red, black pair
OR-42100002
Package of ten blanks
OR-63700058
OR-63700059
OR-63700083
OR-63700047
OR-63700069
OR-63700086
OR-63700060
OR-63700084
OR-63700046
OR-63700023
OR-63700085
OR-63700071
OR-63700070
OR-63700025
OR-63700006
NOTE: Standard color for plastic TracJack faceplates is fog white. For electrical
ivory add -13, for white add -88 and for Wiremold® ivory add -99 to end of part
number. For other colors, contact sales.
OR-63700087
36
OR-63700021
OR-42100002
AUDIO | VIDEO CONNECTIVITY
TechChoice® Keystone Solutions
TechChoice Keystone Solutions
TechChoice Keystone footprint is a rear loading style module that
comes in a variety of A/V connector types as well as Category 5e
and 6 data connectivity. It’s ideal for creating a quality solution
for A/V and data connectivity.
OR-KSHDMI
OR-KSRCAR
OR-KSRCAY
OR-KS35ST
OR-KSUSBAA
OR-KSSV
OR-KSRCAG
OR-KSRCAW
OR-KS35STST
OR-KSUSBAB
OR-KSBNC75
OR-KSBNC
OR-KSFCNR
OR-KSB10
OR-KSSVIDC
OR-KSRCABL
OR-KSRCAB
OR-KS14ST
OR-KSBP
PART NO.
DESCRIPTION
OR-KSHDMI
HDMI, female to female, 19pin
OR-KSSV
S-Video to 110
OR-KSSVIDC
S-Video, female to female
OR-KSRCAR
RCA red to 110
OR-KSRCAG
RCA green to 110
OR-KSRCABL
RCA blue to 110
OR-KSRCAY
RCA yellow to 110
OR-KSRCAW
RCA white to 110
OR-KSRCAB
RCA black to 110
OR-KS35ST
3.5mm, stereo jack, female to female
OR-KS35STST
3.5mm, stereo jack, female to screw term
OR-KS14ST
1/4˝ stereo jack, female to solder
OR-KSUSBAA
USB 2.0 A-A, female to female
OR-KSUSBAB
USB 2.0 A-B, female to female
OR-KSBP
Binding post, set of 2
OR-KSBNC75
BNC 75 ohm, female to female, 75 ohm
OR-KSBNC
BNC 50 ohm, female to female, 50 ohm
OR-KSFCN
F Conn 75 ohm, female to female
OR-KSFCNR
F Conn 75 ohm, recessed, female to female
OR-KSB10
Blank, package of ten
OR-KSFCN
37
MULTIMEDIA WORKSTATIONS
NOTE: All Ortronics product dimensions are listed by width, height and depth unless specified otherwise.
Ortronics Fib-or-Cop workstation solutions service a broad scope of multimedia
applications, supporting sound cabling practices in an attractive and user
friendly design.
Fib-or-Cop II
Fib-or-Cop II offers greater capacity, accommodating up to 12
fiber connections with protected exit from the bottom, and six
copper connections. This is a truly segregated design, which
allows access to one media without impacting the other.
Bottom-exiting connections can be further protected with an
optional snap-on shroud.
OR-62100041
OR-62100044
OR-62100050
38
OR-62100037
OR-62100046
OR-62100052
OR-62100038
OR-62100048
PART NO.
DESCRIPTION
OR-62100041
Base and cover for six TracJacks, 5˝ x 8˝ x 1.19 ˝
OR-62100037
Package of five bottom adapter plates for four
TracJack modules
OR-62100038
Package of five protective bottom shrouds
OR-62100044
3-ST duplex (6 fibers) multimode, beige adapters,
phosphor-bronze alignment sleeves
OR-62100045
3-ST duplex (6 fibers) single-mode, blue adapters,
ceramic alignment sleeves
OR-62100046
6-SC simplex (6 fibers) multimode, beige
adapters, phosphor-bronze alignment sleeves
OR-62100047
6-SC simplex (6 fibers) single-mode, blue
adapters, ceramic alignment sleeves
OR-62100048
3-SC duplex (6 fibers) multimode, beige adapters,
phosphor-bronze alignment sleeves
OR-62100049
3-SC duplex (6 fibers) multimode, blue adapters,
phosphor-bronze alignment sleeves
OR-62100050
6-LC duplex (12 fibers) multimode, beige
adapters, phosphor-bronze alignment sleeves
OR-62100051
6-LC duplex (12 fibers) single-mode, blue
adapters, ceramic alignment sleeves
OR-62100052
6-MT-RJ (12 fibers) feed-through multimode,
beige adapters
OR-62100053
6-MT-RJ (12 fibers) single-mode, blue adapters
MULTIMEDIA WORKSTATIONS
NOTE: All Ortronics product dimensions are listed by width, height and depth unless specified otherwise.
OR-JP66U
Clarity 6 and Clarity 5E
Jak-Paks
The Jak-Pak is a compact, flexible,
multi-user solution that can be structurally
mounted or used in more temporary
environments. Kits come supplied with
Clarity 6 or Clarity 5E six-port/110 modules.
OR-60950301
MUTOA Mac-Pak
The MUTOA Mac-Pak is a compact, flexible,
multi-user solution that can be structurally
mounted or used in more temporary
environments. Kits come ready to accept
flat Category 5e and 6 TracJack® modules
and cables.
Multimedia Outlet (MMO)
Ortronics Multimedia Outlet (MMO) is a high capacity, field
configurable workstation housing. The MMO comes with three
blank panels with cable access knockouts. A wide range of
MMO panels are available to support your specific applications.
MMO mounts directly to any single or double gang recessed wall
box or to any surface. Labeling is supplied.
PART NO.
DESCRIPTION
OR-JP66U
Clarity 6 Jak-Pak, six-port multi-access outlet
field termination kit, T568A/B
OR-JP5E6U
Clarity 5E Jak-Pak, six-port multi-access outlet
field termination kit, T568A/B
PART NO.
DESCRIPTION
OR-60950301
Accepts eight TracJacks, black housing
PART NO.
DESCRIPTION
OR-62100001
Cover base and three blank panels,
6.75˝ x 6.75˝ x 1.68˝, fog white
PART NO.
DESCRIPTION
OR-41200010
Accepts one fiber adapter panel, see fiber section
OR-41200012
Accepts two OR-42100009 TracJack® adapters
OR-42100009
Accepts three TracJacks
OR-62100001
MMO Panels
OR-41200010
OR-42100009
OR-41200012
39
ACCESSORIES
NOTE: All Ortronics product dimensions are listed by width, height and depth unless specified otherwise.
Surface Mount Outlet Boxes
PART NO.
DESCRIPTION
Ortronics surface mount outlet boxes are compatible with all
Ortronics single and double gang faceplates. These boxes
provide a mounting surface for faceplates or can be attached
to recessed boxes to provide greater cable storage capacity.
OR-40300061*
Single gang, low profile, fog white,
3˝ x 4.7˝ x 1.5˝
OR-40300185*
Single gang, fog white, 3˝ x 4.7˝ x 2˝
OR-40300185-13*
Electrical ivory
OR-70900020
Adhesive-back single gang magnet
OR-40300186
Double gang, fog white, 4.9˝ x 4.7˝ x 2˝
OR-70900022
Adhesive-back double gang magnet
OR-70700070
Double-sided adhesive kit
(use two for double gang)
OR-40300061
OR-40300186
OR-40300185-13
OR-70900022
OR-70900020
OR-70700070
*Compatible with Wiremold® 2700, 2800 and 2900 raceway series.
OR-40300010
Extension Plate
Ortronics extension plate provides an
additional .9˝ of depth behind single gang
faceplates for bend radius requirements
or cable storage.
40
PART NO.
DESCRIPTION
OR-40300010
Single gang extension plate, fog white,
2.75˝ x 4.5˝ x .9˝
LABELING AND DESIGNATION SOLUTIONS
OR-70400411
Work Outlet Station
Designation
Color-coded designation strips provide easy
identification for workstations. Designation
strips are supplied in 8.5˝ x 11˝ sheets of
laser feed paper.
Supported by the LabelMo XL templates.
PART NO.
DESCRIPTION
OR-70400411
White
OR-70400411-22
Red
OR-70400411-24
Yellow
OR-70400411-26
Blue
NOTE: Ten sheets per package, 96 labels per sheet.
LabelMo XL Labeling
Templates
PART NO.
DESCRIPTION
OR-70400202
Workstation, replacement designation
label/cover kit, package of ten
Jack Designation Tabs
PART NO.
DESCRIPTION
Ortronics Jack designation tabs snap into
TracJacks modules to identify each port.
Accommodates two one-port modules.
Standard color is fog white. Package of 12.
OR-70400219
Jack designation tabs
Color-Coded Icons
OR-403XX
The LabelMo XL templates provide a
new format for your labeling needs that
increases flexibility and ease of use.
n Provided in an easy-to-use
Excel format
nUses our standard 8.5˝ x 11˝
label stock
OR-70400219
Color-Coded Icons
Ortronics color-coded designation tabs
are for port identification on patch panels
and most workstation products. The tabs
are available in 606 standard colors with
a voice or data icon or blank. Package
of 100.
Manufacturer
Number
Coloring
00=Black
09=Fog White
13=Electrical
Ivory
22=Red
23=Orange
24=Yellow
25=Green
26=Blue
27=Purple
X 00
Marking
1=Voice
2=Data
5=Blank
Ordering Example:
To order a red voice tab,
use the following part
number OR-40322100
NOTE: For a complete set of voice and data tabs in all colors, use order number
OR-40300174.
41
H IGH P E RF ORM A N C E S T R U C T U R E D C A BLIN G
PR OD UCT S & S O L U T I O N S
COPPER CONNECTIVITY
Copper
Patch Panels
Clarity®
Patch Panels
Special
Application
Patch Panels
Ortronics continues to lead the industry in patch panel design
by fully supporting all of the internal and alien requirements
of Category 6a/10 Gigabit Ethernet in a traditional multi-port
adapter panel format. This accomplishment builds on the first
ETL independently verified patch panel to meet the Category
Shielded
Patch Panels
6 component specification. Equally important, Ortronics
panels excel in performance while supporting ease of use and
preferred installation practices. So, whether it is 10 Gig, PoE,
Category 6 or voice, 110 termination or 50-pin, high density,
standard density, angled or hinged, Ortronics has a quality
panel to serve your application.
F E AT U R E D P R O D U C T S
Clarity
6A/10G
Patch
Panels
44
P.
P.44
Clarity®
6A/10G
Flat Panels
P.45
Clarity 6 and
Clarity 5E Flat
Modular to 110
Patch Panels
P.45
Clarity 6 and
Clarity 5E
Modular to
110 Mini
Patch Panels
P.46
Angled & Curved
Clarity 6 and
Clarity 5E
Modular to 110
Patch Panels
P.47
Clarity
High Density
Jacks and
Panels
P.48
Clarity Rear
Loaded Jack
Panel Kits
P.48
Clarity 6 and
Clarity 5E
Panels with
Hinged Cable
Management
P.50
Category 5e and
Category 6 RJ45
Feed-Through
Patch Panels
P.50
P.51
Category 6a
Shielded Patch
Panels
P.52
Category
5e Shielded
Modular to 110
Patch Panels
Clarity 6 &
Clarity 5E
Curved Patch
Panels
Clarity High
Density Jacks
and Panels
P.
P.
46
47
CLARITY® PATCH PANELS
Clarity 6A/10G
Clarity 6A/10G patch panels are available in the traditional multi-port panel
format with 6-port modules and the added flexibility of flat or angled versions.
Utilizing innovative methods for circuit isolation, the Clarity 10G multi-port patch
panels support all alien and internal performance requirements of IEEE 802.3an
(10GBase-T) and TIA
Augmented Category 6 (6a) cabling specifications without requiring the use of
individual
jacks for your panel termination. Clarity 10G multi-port panels support traditional
(linear 110) termination practices with mechanical accommodations for easy
termination of the larger conductors of 10 Gig cables, providing a labor-saving
alternative to the individual jack panel. Clarity 10G angled patch panels utilize a
unique recessed angle design to help direct cords with greater ease to vertical
rack or cabinet management within a lower profile. This design provides an
improved alternative for applications that don’t offer rack space for horizontal
management.
Features
n More transparent signal path with Clarity 10G cords
n Standard termination practice—110 tool
n IDC towers designed to accept larger 10 Gig cable conductors
n Easy-to-follow universal wiring label is quick and user-friendly to eliminate
confusion
n High density panels include label fields and rear cable management
n Meets TIA 568C.2 Category 6a component specifications
n Backwards compatible to Category 6 and Category 5e
OR-PHD6AU48
OR-PHA6AU24
Clarity 6A/10G
Patch Panels
Clarity 6A/10G Flat Patch Panels
PART NO.
DESCRIPTION
OR-PHD6AU24
24-port flat Clarity 6A/10G patch panel, T568A/B,
1.75˝ x 19˝ (1RU)
OR-PHD6AU48
48-port flat Clarity 6A/10G patch panel, T568A/B,
3.5˝ x 19˝ (2RU)
Clarity 6A/10G Angled Patch Panels
PART NO.
DESCRIPTION
OR-PHA6AU24
24-port angled Clarity 6A/10G patch panel,
T568A/B, 1.75˝ x 19˝ (1RU)
OR-PHA6AU48
48-port angled Clarity 6A/10G patch panel,
T568A/B, 3.5˝ x 19˝ (2RU)
Clarity 6A/10G Curved Patch Panels
44
PART NO.
DESCRIPTION
OR-PHC6AU24
24-port curved Clarity 6A/10G patch panel,
T568A/B, 1.75˝ x 19˝ (1RU)
OR-PHC6AU48
48-port curved Clarity 6A/10G patch panel,
T568A/B, 3.5˝ x 19˝ (2RU)
CLARITY® PATCH PANELS
Clarity 6 and 5E
Clarity patch panels combine the Ortronics commitment to ease and reliability
with the ETL verified TIA-568C.2 Category 6 or Category 5e performance of center
tuned connector technology. These 110 termination 19 ˝ panels are available
in six-port and eight-port module groupings, in 12, 24, 48, and 96-port sizes.
Panels provide extensive designation abilities, icon compatibility and rear cable
management.
n ETL verified to TIA component specifications to ensure component
performance
n Center tuned to Clarity patch cords—more transparent mated union and higher
channel performance
n Universal wiring supports T568A and B installations with linear 110 termination
n IDC housing handles both Category 6 and Category 5e conductors
n Supplied rear cable management supports cabling best practices
n High density design maximizes rack utilization
OR-PHD66U24
Clarity 6 and Clarity 5E
Modular to 110 Patch
Panels
OR-PHD68U24
Clarity High Density Patch Panels with Six-Port Modules
CLARITY 6
PART NO.
CLARITY 5E
PART NO.
DESCRIPTION
OR-PHD66U24
OR-PHD5E6U24
24-port, T568A/B,
height 1.75˝, 1 rack unit
OR-PHD66U48
OR-PHD5E6U48
48-port, T568A/B,
3.5˝x 19˝, 2 rack units
OR-PHD66U96
OR-PHD5E6U96
96-port, T568A/B,
height 7˝, 4 rack units
Clarity High Density Patch Panels with Eight-Port Modules
OR-PMP612H
OR-PMP61289
Clarity 6 and Clarity
5E Modular to 110 Mini
Patch Panels
CLARITY 6
PART NO.
CLARITY 5E
PART NO.
DESCRIPTION
OR-PHD68U24
OR-PHD5E8U24
24-port, T568A/B,
height 1.75˝, 1 rack unit
OR-PHD68U48
OR-PHD5E8U48
48-port, T568A/B,
height 3.5˝, 2 rack units
OR-PHD68U96
OR-PHD5E8U96
96-port, T568A/B,
height 7˝, 4 rack units
Clarity High Density Patch Panels with Six-Port Modules
CLARITY 6
PART NO.
CLARITY 5E
PART NO.
DESCRIPTION
OR-PMP612H
OR-PMP5E12H
12-port, T568A/B,
hinged mounting
OR-PMP61289
OR-PMP5E1289
12-port, T568A/B,
89D mounting
45
CLARITY® PATCH PANELS
Angled and Curved
NOTE: All Ortronics product dimensions are listed by width, height and depth unless specified otherwise.
Clarity angled panels utilize a unique recessed angle design to help direct cords
with
greater ease to vertical rack or cabinet management within a lower profile. This
design provides an improved alternative for applications that don’t offer rack space
for horizontal management. Rugged rear cable management is supplied to support
best cabling practices.
Ortronics Clarity curved patch panels offer yet another alternative for patch cord
management. Built around the elevated performance of Clarity 6 and Clarity 5E,
these
high density patch panels feature a new look, utilizing a patented, recessed, curved
design to help direct cords to vertical rack or cabinet management within a lower
profile. This design provides another alternative for installations which have limited
rack space for horizontal management.
n Lower mounted profile directs cords more easily to vertical management
n Deeper rear cable support bar addresses larger Category 6 cable designs
n ETL verified category performance
n Compatibility with standard 110 tool termination practices
n Time saving termination with easy lace multi-port adapters
n Rugged construction
n Label fields and icon compatibility
nWork especially well with the increased depth and enhancements of Mighty Mo®
6 and Mighty Mo 10 cable management racks
Angled Clarity 6 and Clarity 5E Modular to 110 Patch Panels
OR-PHA66U48
OR-PHA66U48 (back)
CLARITY 6
PART NO.
CLARITY 5E
PART NO.
DESCRIPTION
OR-PHA66U24
OR-PHA5E6U24
24-port, T568A/B,
height 1.75˝, 1 rack unit
OR-PHA66U48
OR-PHA5E6U48
48-port, T568A/B,
height 3.5˝, 2 rack units
CLARITY 6
PART NO.
CLARITY 5E
PART NO.
DESCRIPTION
OR-PHC66U24
OR-PHC5E6U24
24-port, T568A/B,
1.75˝ x 19˝, 1 rack
OR-PHC66U48
OR-PHC5E6U48
48-port, T568A/B,
3.5˝ x 19˝, 2 rack units
Clarity 6 and Clarity 5E Curved Patch Panels
OR-PHC66U24
46
OR-PHC5E6U24
CLARITY® HIGH DENSITY
Jacks and Panels
NEW
NOTE: All Ortronics product dimensions are listed by width, height and depth unless specified otherwise.
Ortronics® newest high density Clarity jack and panel products (HDJ) solve density
challenges without sacrificing performance. The smaller HDJ jack footprint allows up
to 48 ports of premium Category 6a, 6 or 5e performance in 1 rack unit panel. This
system is ideal for applications like data centers, distribution areas (TIA-942 Standard)
or limited space, high density environments.
The new high density jack and panel series provides:
n Less required rack and floor space to reduce real-estate costs
n A nearly transparent signal path, when used with Clarity patch cords, for enhanced network performance
nA new slide-lock mounting for easier termination and shorter installation time that eliminates errors and
reduces labor costs, while locking the jacks firmly in place
OR-HDJ6A-42
High Density Jacks
Ortronics new high density jacks
provide greater headroom, as well
as a new installation mechanism.
In addition, the easy to laceand-crimp termination maintains
cable performance and reduces
time to install. The HDJ jacks are
available in Category 6a, 6 and
5e with Clarity performance that
is visible in the channel. These
jacks are rear loading, utilizing an
innovative locking latch for quick
and reliable mounting.
OR-PHAHJU24
OR-PHAHJU48
OR-HDJHCT
High Density Panels
The HDJ series of jacks is
supported by high density flat
or angled panel options, which
includes 24 port (1RU), 48 port
(1RU) and 72 port (2RU) sizes.
All panels are supplied with
rear cable management bars,
straps and ties.
HDJ Handled
Crimping Tool
The HDJ termination process
is simpler. The HDJ handled
crimping tool works with the
jack’s easy to lace wiring cap,
making the crimp process quick
and consistently aligned. This
presents an even greater time
savings when terminating cable.
PART NO.
DESCRIPTION
OR-HDJ6A
Clarity HDJ Category 6a jack, 8 position,
T568A/B, fog white
OR-HDJ6
Clarity HDJ Category 6 jack, 8 position,
T568A/B, fog white
OR-HDJ5E
Clarity HDJ Category 5e jack, 8 position,
T568A/B, fog white
NOTE: For other colors, add one of the following suffixes:
-00 = black, -36 = blue, -42 = red, -43 = orange, -44 = yellow,
-45 = green, -88 = white.
PART NO.
DESCRIPTION
OR-PHAHJU24
24 port angled HDJ jack panel, unloaded,
1.75˝ x 19˝, 1RU
OR-PHAHJU48
48 port angled HDJ jack panel, unloaded,
1.75˝ x 19˝, 1RU
OR-PHAHJU72
72 port angled HDJ jack panel, unloaded,
1.75˝ x 19˝, 2RU
OR-PHDHJU24
24 port flat HDJ jack panel, unloaded,
1.75˝ x 19˝, 1RU
OR-PHDHJU48
48 port flat HDJ jack panel, unloaded,
1.75˝ x 19˝, 1RU
OR-PHDHJU72
72 port flat HDJ jack panel, unloaded,
1.75˝ x 19˝, 2RU
PART NO.
DESCRIPTION
OR-HDJHCT
HDJ handled crimping tool
47
PATCH PANELS
Clarity® Patch Panel Kits
NOTE: All Ortronics product dimensions are listed by width, height and depth unless specified otherwise.
OR-PHAPJU48
OR-PJ600-00
Clarity Rear-Load
Jack Panel Kits
Ortronics rear-loading individual
jack panels utilize reduced-size
Clarity 6 and Clarity 5E panel
jacks that can be terminated
and snap-in from the back of
the patch panel. A variety of
panel configurations allow a
wide choice of field configurable,
easy to install horizontal cross
connects. Panels are supplied
without jacks. Jacks can be
ordered individually or in full
carton quantities of 24.
Rear-Load Panels (See panel jack part no. below panel no.)
PART NO.
DESCRIPTION
OR-PHAPJU24
24-port, panel jack panel kit, angled,
unloaded, 1 rack unit, 19˝ x 1.75˝, HD
OR-PHAPJU48
48-port, panel jack panel kit, angled,
unloaded, 2 rack units, 19˝ x 3.5˝, HD
OR-PHAPJU72
72-port, panel jack panel kit, angled,
unloaded, 2 rack units, 19˝ x 3.5˝, HD
OR-PHDPJU24
24-port, panel jack panel kit, flat,
unloaded, 1 rack unit, 19˝ x 1.75˝, HD
OR-PHDPJU48
48-port, panel jack panel kit, flat,
unloaded, 2 rack units, 19˝ x 3.5˝, HD
OR-PHDPJU72
72-port, panel jack panel kit, flat,
unloaded, 2 rack units, 19˝ x 3.5˝, HD
Rear-Load Panel Jacks
PART NO.
DESCRIPTION
OR-PJ6A-00
Panel jack, Clarity 6A, T568A/B,
8 pos, black, 180º
OR-PJ6-00
Panel jack, Clarity 6, T568A/B,
8 pos, black, 180º
OR-PJ5E-00
Panel jack, Clarity 5E, T568A/B,
8 pos, black, 180º
NOTE: Clarity panel jacks are available in these colors:
-36 blue, -42 red, -43 orange,-44 yellow, -45 green.
Replace tail code to the end of part number.
OR-PHD66U24HM
OR-PHD5E6U48HM
Clarity 6 and
Clarity 5E Patch
Panels with Hinged
Cable Management
Hinged Clarity panels include
cable management panels to
assist in applications with limited
rear access. Panels can be
terminated in the hinged-down
position while resting on
management rings. Panels can
also be mounted back-to-back
on our 16.25˝ deep Mighty
Mo® racks.
Clarity High Density Patch Panels with Six-Port Modules
CLARITY 6
PART NO.
CLARITY 5E
PART NO.
DESCRIPTION
OR-PHD66U24HM
OR-PHD5E6U24HM
24-port, T568A/B,
height 3.5˝, 2 rack units
OR-PHD66U48HM
OR-PHD5E6U48HM
48-port, T568A/B,
height 7˝, 4 rack units
NOTE: 24-port high density panels have 1.75˝ cable management panels with
1.7˝ x 3.5˝ rings. All other hinged panels have 3.5˝ cable management panels
with 3˝ x 4˝ rings.
Clarity High Density Patch Panels with Six-Port Modules
CLARITY 6
PART NO.
CLARITY 5E
PART NO.
DESCRIPTION
OR-PSD66U24HM
OR-PSD5E6U24HM
24-port, T568A/B,
height 7˝, 4 rack units
OR-PSD66U48HM
OR-PSD5E6U48HM
48-port, T568A/B,
height 8.75˝, 5 rack units
NOTE: 24-port high density panels have 1.75˝ cable management panels with
1.7˝ x 3.5˝ rings. All other hinged panels have 3.5˝ cable management panels
with 3˝ x 4˝ rings.
48
PATCH PANELS
Patch Panel Kits
NOTE: All Ortronics product dimensions are listed by width, height and depth unless specified otherwise.
OR-401045292
Patch Panel Kits
Ortronics 19 ˝ wide panel kits
provide the ability to field
configure your own patch
panels. Kits are available to
support front-loading TracJack®
modules, providing panel options
to support a wide range of
applications. TracJacks modules
are ordered separately.
Standard Density TracJack Patch Panel Kits
PART NO.
DESCRIPTION
OR-401045289
16 TracJack panel kit with shelf, height 1.75˝,
depth 4˝, 1 rack unit
OR-401045290
24 TracJack panel kit with shelf, height 3.5˝,
depth 5˝, 2 rack units
OR-401045291
32 TracJack panel kit with shelf, height 3.5˝,
depth 5˝, 2 rack units
OR-401045292
48 TracJack panel kit with shelf, height 5.25˝,
depth 6˝, 3 rack units
(TracJacks not included, see page 28).
49
SPECIAL APPLICATION PATCH PANELS
NOTE: All Ortronics product dimensions are listed by width, height and depth unless specified otherwise.
OR-PHD5E2148
Category 5e
Telco Panel
PART NO.
DESCRIPTION
OR-PHD5E2124
24-port, flat panel, T568B, height 1.75˝, 1 rack unit
OR-PHD5E2148
48-port, flat panel, T568B, height 3.5˝, 2 rack units
OR-PHA5E2124
24-port, angled panel, T568B, height 1.75˝,
1 rack unit
OR-PHA5E2148
48-port, angled panel, T568B, height 3.5˝,
2 rack units
PART NO.
DESCRIPTION
OR-PHD5EFF24
24-port, RJ45, feed-through patch panel,
Cat 5e, T568A/B, 19˝x 1.75˝, 1 rack unit
Ortronics Category 5e and
Category 6 RJ45 feed-through
panels provide interface between
two RJ45 plugs.
OR-PHD6FF24
24-port, RJ45, feed-through patch panel,
Cat 6, T568A/B, 19˝x 1.75˝, 1 rack unit
Modular Quadframe
19˝ Telco Patch Panels
MALE TELCO
PART NO.
FEMALE TELCO
PART NO.
DESCRIPTION
OR-808004920
OR-808004921
24-port, 50-pin telco qty 1,
6-position RJ11, pins 3 and 4,
height 3.5˝, 2 rack units
OR-808004940
OR-808004941
48-port, 50-pin telco qty 2,
6-position RJ11, pins 3 and 4,
height 5.25˝, 3 rack units
OR-808004942
OR-808004943
48-port, 50-pin telco qty 4, 6-position
RJ14, pins 2-5, height 3.5˝, 2 rack units
OR-808044253
OR-808004723
48-port, 50-pin telco qty 2, 8-position,
pins 4 and 5, height 5.25˝, 3 rack units
Ortronics Category 5e 25-pair
panels provide a 50-pin connector
interface (standard RJ21 wiring)
between Category 5e 25-pair
cable Gigabit Ethernet hubs
requiring full 4-pair cabling.
Panels provide front label fields.
Use with 845E cable assemblies.
OR-PHD5EFF24
OR-PHD6FF24
OR-808004920
Category 5e and
Category 6 FeedThrough Patch Panels
Ortronics modular quadframe
19˝ telco panels provide RJ21
50-pin connectors wired to
two-, four-, six-, or eight-contact
jacks. These panels are commonly
used to support voice, alarm,
and low speed data applications.
Available jack wiring: RJ11,
RJ14, 8-position (4-5).
50
SPECIAL APPLICATION PATCH PANELS
NOTE: All Ortronics product dimensions are listed by width, height and depth unless specified otherwise.
OR-808004345
High Density Modular
19˝ Telco Patch Panels
MALE TELCO
PART NO.
FEMALE TELCO
PART NO.
DESCRIPTION
Ortronics 19˝ wide high density
modular telco panels provide
RJ21 50-pin connectors wired
to two-, four-, six-, or eightcontact 8-position jacks. These
panels are commonly used to
support voice, alarm, and low
speed data applications.
OR-808004388
OR-808004389
24-port, 50-pin telco qty 1, 8-position,
pins 4 and 5, height 1.75˝, 1 rack unit
OR-808004333
OR-808004339
24-port, 50-pin telco qty 4, 8-position,
pins 1–8*, height 1.75˝, 1 rack unit
OR-808004042
OR-808004041
48-port, 50-pin telco qty 2, 8-position,
pins 4 and 5, height 3.5˝, 2 rack units
OR-808004343
—
48-port, 50-pin telco qty 8, 8-position,
pins 3-6*, height 3.5˝, 2 rack units
—
OR-808004351
48-port, 50-pin telco qty 8, 8-position,
pins 1–8*, height 3.5˝, 2 rack units
NOTE: *T568B wired 8-position jacks.
SHIELDED PATCH PANELS
NOTE: All Ortronics product dimensions are listed by width, height and depth unless specified otherwise.
OR-PHDPJS6A24
Clarity® Shielded
Jack Panels
Ortronics shielded panels offer
rear loading shielded jacks to
support improved ease of
termination and installation
from the back of the panel.
OR-PHATKS6A24
Category 6a Shielded
Patch Panels
with Rear Cable
Management
PART NO.
DESCRIPTION
OR-PHDPJS6A24
24-port shielded, Category 6a,
1 rack unit, 19˝ x 1.75˝
OR-PHDPJS5E24
24-port shielded, Category 5e,
1 rack unit, 19˝ x 1.75˝
PART NO.
DESCRIPTION
OR-PHDTKS6A24
24 port, Flat 1RU patch panel
with 24 TKS6A jacks
OR-PHDTKS6A48
48 port, Flat 2RU patch panel
with 48 TKS6A jacks
OR-PHATKS6A24
24 port, Angled 1RU patch panel
with 24 TKS6A jacks
OR-PHATKS6A48
48 port, Angled 2RU patch panel
with 48 TKS6A jacks
51
SHIELDED PATCH PANELS
NOTE: All Ortronics product dimensions are listed by width, height and depth unless specified otherwise.
OR-PHDTKSU48
OR-867045187
Unloaded Shielded
Patch Panels
Category 5e Shielded
Modular to 110 Patch
Panels
PART NO.
DESCRIPTION
OR-PHDTKSU24
24 port, Flat 1RU patch panel with 24
TKS6A jacks
OR-PHDTKSU48
48 port, Flat 2RU patch panel with 48
TKS6A jacks
OR-PHATKSU24
24 port, Angled 1RU patch panel with 24
TKS6A jacks
OR-PHATKSU48
Unloaded 48-port, angled 1RU patch panel for
TKS jacks
OR-TKS6A
Category 6a Shielded self-terminating
keystone jack
PART NO.
DESCRIPTION
OR-867045187
24-port shielded Category 5e patch panels,
height 1.75˝, depth .95˝, 1RU
Shielded Category 5e modular
to 110 patch panels are fully
encased to protect connections
from EMI and RFI and have a
removable cover for easy
access to terminations.
LABELING AND DESIGNATION SOLUTIONS
Color-Coded Icons
Color-Coded Icons
Ortronics color-coded designation tabs
are for port identification on patch panels
and most workstation products. The tabs
are available in 606 standard colors with a
voice or data icon or blank. Package of 100.
OR-403XX
Manufacturer
Number
Coloring
00=Black
09=Fog White
13=Electrical
Ivory
22=Red
X
23=Orange
24=Yellow
25=Green
26=Blue
27=Purple
00
Marking
1=Voice
2=Data
5=Blank
Ordering example: To order a red voice tab, use the following part number OR-40322100.
NOTE: For a complete set of voice and data tabs in all colors, use order number OR40300174.
52
LABELING AND DESIGNATION SOLUTIONS
NOTE: All Ortronics product dimensions are listed by width, height and depth unless specified otherwise.
OR-70400408
Six- and Eight-Port Module
Patch Panel Designation
Color-coded designation strips can be
used in six or eight-port patch panel
module front bezels. Designation strip
sheets are 8.5˝ W x 11˝ H. Support by
the Label XL templates.
LabelMo XL
Labeling Templates
The LabelMo XL templates provide a
new format for your labeling needs that
increases flexibility and ease of use.
n
n
Provided in an easy-to-use
Excel format.
Uses our standard 8.5˝ x 11˝
label stock.
NOTE: To download templates, please
visit www.ortronics.com/resources
Six-Port Module Patch Panel Designation
PART NO.
DESCRIPTION
OR-70400408
White
OR-70400408-22
Red
OR-70400408-23
Orange
OR-70400408-24
Yellow
OR-70400408-25
Green
OR-70400408-26
Blue
NOTE: Ten sheets per package, 48 labels per sheet.
Eight-Port Module Patch Panel Designation
PART NO.
DESCRIPTION
OR-70400409
White
OR-70400409-22
Red
OR-70400409-24
Yellow
OR-70400409-26
Blue
NOTE: Ten sheets per package, 48 labels per sheet.
Eight-Port Module Thin Patch Panel Kit Designation
PART NO.
DESCRIPTION
OR-70400644
White
NOTE: Ten sheets per package, 44 labels per sheet.
Six-Port Module Thin Patch Panel & Jak-Pak Designation
PART NO.
DESCRIPTION
OR-70400691
White
NOTE: Ten sheets per package, 88 labels per sheet.
Six-Port Module Thin Designation Holder
PART NO.
DESCRIPTION
OR-70400692
Bezel color for maximum density patch panels
NOTE: Eight required per patch panel.
Six-Port Module Patch Panel Designation
PART NO.
DESCRIPTION
OR-70400141
Six-port module, package of four, yellow, Clarity 10G
OR-70400638
Six-port module, package of four, blue, Clarity 6
OR-70400659
Six-port module, package of four, green, Clarity 5E
OR-70400789
Eight-port module, package of four, blue,Clarity 6
OR-70400790
Eight-port module, package of four, green,Clarity 5E
NOTE: Ten sheets per package, 48 labels per sheet.
53
H IGH P E RF ORM A N C E S T R U C T U R E D C A BLIN G
PR OD UCT S & S O L U T I O N S
COPPER CONNECTIVITY
SNAP
™
Pre-Terminated
Copper Cabling System
Cable
Assemblies
56
P.
Patch
Panels
58
P.
Quick and reliable data center installations are a SNAP
with the latest innovation from Ortronics!
In today’s workplace, where network downtime is costly
and detrimental to any business or organization, bringing
Workstation
Modules
59
P.
a new network online must be completed as quickly as
possible. Quick and easy installations that guarantee reliable
performance are more critical than ever.
Clarity® SNAP Pre-Terminated Copper Cabling System
offers the above-the-standards performance of Clarity
connectivity in a custom terminated cable assembly system
that’s ready to plug and go. Its innovative modular design
combines high performance and installer friendly features
with the quick deployment and reliability of a factory
terminated and tested cabling system.
F E AT U R E D P R O D U C T S
SNAP™ PRE-TERMINATED
COPPER CABLING SYSTEM
The SNAP connection utilizes a bifurcated termination method, placing one mating
half of the termination onto the horizontal cable and the other on the 8-position T568
jack interface. This approach reduces the size of the terminated cable ends, making
it easier to pull and lace cables through racks, cabinets, cable management systems,
and
pathways. In addition, individual cable ends of bundled cables can be passed through
one at a time, as compared to some alternative designs where the connections are
bundled into modules and must be pulled through pathways and openings that way.
As a result, SNAP cable assemblies route faster, with less interference from connector
ends within congested pathways. And, the robust cable ends are ruggedly designed
to handle the physical challenges of any installation. When in position, these cable
ends simply SNAP into the back of the panel or workstation outlet, completing the
termination. It’s a SNAP!
The Clarity® SNAP system also offers the added assurance of the premium
performance of Clarity connectivity. The SNAP bifurcated termination offers improved
pair-to-pair isolation and improved pair balance through the connector, while barriers
located
on the sides of these terminations enhance alien noise performance. The result is
improved channel immunity from internal and external noise, which ensures
consistently high performance links and channels.
The benefit of these technological advancements is a consistently high performance
cabling system that is fast and simple to install and enables quick network
deployment, increased reliability, and lower total cost of ownership. Both the electrical
design of SNAP and the additional controls and in-process testing only available in a
factory
environment lead to improved consistency in channel performance, to improve the
overall average results that you can expect from your installation.
The Clarity SNAP system has
expanded to include port replication
Port replication enables a separate patch panel to act as the administrative cross connect
for servers and switches. Factory assembled port replication cable sets and panels
provide a quick and easy pretested option.
Port replication is an increasingly popular method of protecting modular jacks in
both switches and servers. Repeated use of these modular jacks as an administrative
connection to horizontal cabling can cause damage to the jack port. Port replication
enables a separate patch panel to act as the administrative cross connect instead
of using the switch or server ports directly, minimizing the risk of harm to your active
equipment. Should the replicated ports become damaged over time, the replacement
cost and network downtime are significantly less than the expense of replacing a switch
or server port.
Ortronics Clarity SNAP Port Replication (PR) raises the bar in performance and speed of
installation by utilizing the SNAP system’s innovative design to easily integrate
factory-terminated cables into a port replication application. SNAP PR cable assemblies
use RJ45 terminations on the server/switch side and SNAP cable terminations on the
patch panel side to enable the SNAP patch panel as the cross connect.
55
SNAP™ CABLE ASSEMBLIES
Each Clarity® SNAP cable assembly includes an identification label, which includes part number, performance level, and
serialized quality assurance number for future traceability.
OR-PCHXP6B06XXXXX
OR-PCH3R6M06XXXXX
OR-PCS2P06XXXXX
Multiple Cable Harnesses Matrix
Choose your cable
type, number of
cables, color,
length and leg
style using the
blue shaded code.
CABLE TYPE
PCH
CAT6+ Plenum
XP 6 spiral-bound
bundle
XR
6 in mesh
3P
CAT6+ Riser
3R
CAT6 Plenum
2P
CAT6 Riser
2R
CAT6 LSZH
2L
CAT5E Plenum
1P
CAT5E Riser
1R
CAT6A Plenum
CAT6A Riser
Note: Contact sales
for leadtimes and mins
for other cable colors.
Example:
NO. OF CABLES
PCH
XP
COLOR
6B Blue
06
6m White
09
6B
06
LENGTH FEET
(INCLUDES LEGS)
XXX
END 1 LEGS
END 2 LEGS
no stagger w/
protective sock
1
no stagger w/
protective sock
1
stagger left w/
protective sock
2
stagger left w/
protective sock
2
stagger right w/
protective sock
3
stagger right w/
protective sock
3
no stagger w/
pulling sock
4
no stagger w/
pulling sock
4
stagger left w/
pulling sock
5
stagger left w/
pulling sock
5
stagger right w/
pulling sock
6
stagger right w/
pulling sock
6
XXX
1
1
Single Cable Assembly Matrix
Choose your cable
type, color, length
and leg style
using the blue
shaded code.
CABLE TYPE
PCS
Note: Contact sales
for leadtimes and mins
for other cable colors.
Example:
XP
Blue
(INCLUDES LEGS)
06
XXX
CABLE NUMBER LABEL
No label
00
#1
01
#2
02
CAT6A Riser
XR
CAT6+ Plenum
3P
CAT6+ Riser
3R
#3
03
CAT6 Plenum
2P
#99
99
CAT6 Riser
2R
CAT6 LSZH
2L
CAT5E Plenum
1P
CAT5E Riser
PCS
56
CAT6A Plenum
LENGTH FEET
COLOR
White
09
1R
XP
06
XXX
01
SNAP™ CABLE ASSEMBLIES
Port-Replication
OR-PRS3P09XXXXX
OR-PRH3R6B09XXXXX
Multiple Cable Harnesses Matrix
Choose your cable
type, number of
cables, color,
length and leg
style using the
blue shaded code.
CABLE TYPE
PRH
Example:
CAT6 Plenum
3P 6 spiral-bound
bundle
3R
6 in mesh
2P
CAT6 Riser
2R
CAT5E Plenum
1P
CAT5E Riser
1R
CAT6+ Plenum
CAT6+ Riser
NOTE: More colors
are coming soon.
NO. OF CABLES
PRH
3P
COLOR
6B Blue
06
6m White
09
6B
06
LENGTH FEET
(INCLUDES LEGS)
XXX
END 1 LEGS
END 2 LEGS
no stagger w/
protective sock
1
no stagger w/
protective sock
1
stagger left w/
protective sock
2
stagger left w/
protective sock
2
stagger right w/
protective sock
3
stagger right w/
protective sock
3
no stagger w/
pulling sock
4
no stagger w/
pulling sock
4
stagger left w/
pulling sock
5
stagger left w/
pulling sock
5
stagger right w/
pulling sock
6
stagger right w/
pulling sock
6
XXX
1
1
Single Cable Assembly Matrix
Choose your cable
type, color, length
and leg style
using the blue
shaded code.
CABLE TYPE
PRS
Contact sales for other
color requirements
and leadtimes.
Example:
PRS
LENGTH FEET
COLOR
CAT6+ Plenum
3P
CAT6+ Riser
3R
(INCLUDES LEGS)
Blue
06
White
09
XXX
CABLE NUMBER LABEL
No label
00
#1
01
#2
02
CAT6 Plenum
2P
CAT6 Riser
2R
#3
03
CAT5E Plenum
1P
#99
99
CAT5E Riser
1R
3P
06
XXX
01
57
SNAP™ PATCH PANELS
Clarity® SNAP patch panels offer improved rear cable management with the addition of an adjustable depth rear management
bar. The rear portion of these bars is also removable to provide more working room for the initial termination of panels. After
cables are SNAP terminated, the rear bars are attached and adjusted to the depth that best matches the cable and rack
selections.
SNAP panels are also supplied with SNAP-on positioning bend limiters. These plastic cable management aids assist with
maintaining proper bend radius of all cables while minimizing the stress on any one cable. This is especially beneficial for
cable bundles, as this allows the dissipation of any stress across the entire bundle instead of any one cable termination.
SNAP Panels
OR-PPCF66U24
OR-PPCA66U48
Flat Panels
PART NO.
FLAT 24-PORT
PART NO.
FLAT 48-PORT
DESCRIPTION
OR-PPCF610U24
OR-PPCF610U48
Clarity 10G flat panels
with 6-port modules
OR-PPCF66U24
OR-PPCF66U48
Clarity 6 flat panels
with 6-port modules
OR-PPCF5E6U24
OR-PPCF5E6U48
Clarity 5E flat panels
with 6-port modules
PART NO.
ANGLED 24-PORT
PART NO.
ANGLED 48-PORT
DESCRIPTION
OR-PPCA610U24
OR-PPCA610U48
Clarity 10G flat panels
with 6-port modules
OR-PPCA66U24
OR-PPCA66U48
Clarity 6 flat panels
with 6-port modules
OR-PPCA5E6U24
OR-PPCA5E6U48
Clarity 5E flat panels
with 6-port modules
Angled Panels
OR-PHDSJU24
Panel Jack Panels without Jacks
OR-PJSN6-36
PART NO.
FLAT 24-PORT
PART NO.
FLAT 48-PORT
DESCRIPTION
OR-PHDSJU24
OR-PHASJU24
24-port
OR-PHDSJU48
OR-PHASJU48
48-port
Panel Jacks
PART NO.
DESCRIPTION
OR-PJSN6A-xx
Clarity 10G
OR-PJSN6-xx
Clarity 6
OR-PJSN5E-xx
Clarity 5E
NOTE: SNAP PJs available colors -00 black ,-36 blue, -42 red,- 43 orange,
-44 yellow, -45 green, - 68 gray.
58
SNAP™ WORKSTATION MODULES
SNAP TracJack® Workstation Modules
OR-TJSN6
PART NO.
DESCRIPTION
OR-TJSN6A-xx
Clarity 10G
OR-TJSN6-xx
Clarity 6
OR-TJSN5E-xx
Clarity 5E
NOTE: xx = 2 digit color code.
NOTE: SNAP TJs available colors -09 fog white ,-36 blue, -42 red,- 43 orange,
-44 yellow, -45 green, - 68 gray.
SNAP Inline Coupler
Ortronics SNAP inline coupler will allow multiple lengths of
SNAP cable assemblies to be connected together in a
horizontal channel or permanent link.
This product is targeted for use in the open office, flexible
workplaces or environments where there is a predisposition
that work station layouts will be frequently modified. Factory
terminated cabling offers a time saving approach to initial
installation and future moves, adds and changes (MAC).
PART NO.
DESCRIPTION
OR-TJSNIC-53
SNAP inline coupler TracJack orange
OR-PJSNIC-53
SNAP inline coupler Panel Jack orange
nSupported by Panel Jack (PJ) panel and TracJack (TJ) plate
mounting options.
OR-TJSNIC-53
OR-PJSNIC-53
59
H IGH P E RF ORM A N C E S T R U C T U R E D C A BLIN G
PR OD UCT S & S O L U T I O N S
COPPER CONNECTIVITY
Copper Cords
Clarity
Patch Cords
Clarity Shielded
Patch Cords
Clarity 110
Patch Cords
Custom
Assemblies
Clarity® 6A/10G, Clarity 6 and Clarity 5E patch cords lead the
impressive family of Ortronics® cable assemblies. Patch cords
are now recognized as the most critical element of any high
performance cabling system. Ortronics developed and is
continuously improving Paralign™ modular plug technology
to ensure that Clarity cords offer unsurpassed installed
performance. The Clarity patch cord offering is complemented
by an extensive line of voice/data grade cords and 25-pair
cable assemblies—all built with the same attention to quality
and performance.
F E AT U R E D P R O D U C T S
Clarity 6
Modular
Patch Cords
62
P.
P.62
Clarity 6 and
5e Modular
Patch Cords
P.64
Clarity VoIP
Patch Cords
P.63
Clarity 6A/10G
Patch Cords
P.64
Shielded Clarity
Modular Patch
Cords
P.66
Clarity UTP
110/110
Patch Cords
P.66
Clarity UTP
110/Modular
8-Position
Patch Cords
P.67
Category 5e
25-Pair Cable
Assemblies
P.67
25-Pair Cable
Assemblies
Clarity
6A/10G
Patch Cords
Clarity 6
VoIP
Patch Cords
P.
P.
63
64
CLARITY® PATCH CORDS
Clarity UTP Patch Cords
Clarity patch cords utilize center tuned technology to elevate channel performance. Clarity 6A, 6 and 5e cords are ETL verified
to Category 6 and 5e component standards. More importantly, center tuning these cords to Clarity jacks and panels provides
significant elevation of channel performance that can be field measured.
n
n
n
n
n
n
Center tuned to Clarity jacks and panels for a more transparent mated union
Improved Paralign™ 2 plug termination better controls plug performance
Assembled with premium cordage and 100% factory tested for performance, reliability, and long life
Narrow Paralign plug profile supports use in high density panels and hubs
Clarity 6 and Clarity 5E patch cords are ETL verified* to TIA-568C.2 component specifications to ensure component
compliance to project specifications
Icon compatible—provides additional TIA-606-A designation capabilities
*NOTE: Low Smoke Zero Halogen Clarity 6 and Clarity 5E modular patch cords are not ETL verified.
OR-MC607-06
Clarity Modular
Patch Cords
Clarity 6 and Clarity 5E PVC
modular patch cords are
ETL verified to Category
6 and 5e component
standards, while providing
elevated field-measurable
channel performance.
Low Smoke Zero Halogen Clarity Modular Patch Cords
CLARITY 6
CATEGORY 6
UTP PART NO.
CLARITY 5E
CATEGORY 5e
UTP PART NO.
DESCRIPTION
OR-MCZ603-06 OR-MCZ5E03-06
Four-pair 24 AWG stranded UTP, blue, LSZH,
length 3´
OR-MCZ605-06 OR-MCZ5E05-06
Four-pair 24 AWG stranded UTP, blue, LSZH,
length 5´
OR-MCZ607-06 OR-MCZ5E07-06
Four-pair 24 AWG stranded UTP, blue, LSZH,
length 7´
OR-MCZ609-06 OR-MCZ5E09-06
Four-pair 24 AWG stranded UTP, blue, LSZH,
length 9´
OR-MCZ615-06 OR-MCZ5E15-06
Four-pair 24 AWG stranded UTP, blue, LSZH,
length 15´
OR-MCZ620-06 OR-MCZ5E20-06
Four-pair 24 AWG stranded UTP, blue, LSZH,
length 20´
OR-MCZ625-06 OR-MCZ5E25-06
Four-pair 24 AWG stranded UTP, blue, LSZH,
length 25´
NOTE: To order other standard colors change suffix on MC cords:
-02 = red, -04 = yellow, -05 = green, -06 = blue, -08 = gray, -09 = white, -00 = black.
Clarity Modular Patch Cords - PVC
CLARITY 6
CATEGORY 6
UTP PART NO.
CLARITY 5E
CATEGORY 5e
UTP PART NO.
DESCRIPTION
OR-MC603-06
OR-MC5E03-06
Four-pair 24 AWG stranded UTP, blue, PVC,
length 3´
OR-MC605-06
OR-MC5E05-06
Four-pair 24 AWG stranded UTP, blue, PVC,
length 5´
OR-MC607-06
OR-MC5E07-06
Four-pair 24 AWG stranded UTP, blue, PVC,
length 7´
OR-MC609-06
OR-MC5E09-06
Four-pair 24 AWG stranded UTP, blue, PVC,
length 9´
OR-MC615-06
OR-MC5E15-06
Four-pair 24 AWG stranded UTP, blue, PVC,
length 15´
OR-MC620-06
OR-MC5E20-06
Four-pair 24 AWG stranded UTP, blue, PVC,
length 20´
OR-MC625-06
OR-MC5E25-06
Four-pair 24 AWG stranded UTP, blue, PVC,
length 25´
NOTE: To order other standard colors change suffix on MC cords:
-02 = red, -04 = yellow, -05 = green, -06 = blue, -08 = gray, -09 = white, -00 = black.
62
CLARITY® PATCH CORDS
Clarity UTP Patch Cords
OR-MC61009-09
Clarity 6A/10G
Patch Cords
Clarity 6A/10G patch
cords combine Category
6a performance with the
flexibility of stranded
conductor cordage for
increased flexibility and
ease of cable management.
MC610 patch cord assemblies
combine with Clarity 6A jacks
and panels to deliver reliable
10 Gig channel performance.
Meets TIA 568C.2 Category 6a
component specifications.
PVC PART NO.
DESCRIPTION
OR-MC61003-09
Modular cord, white, 3´
OR-MC61005-09
Modular cord, white, 5´
OR-MC61007-09
Modular cord, white, 7´
OR-MC61009-09
Modular cord, white, 9´
OR-MC61015-09
Modular cord, white, 15´
OR-MC61020-09
Modular cord, white, 20´
OR-MC61025-09
Modular cord, white, 25´
NOTE: To order other standard colors change suffix on MC cords:
-02=red, -03=orange, -04=yellow, -05=green, -06=blue, -08=gray, -09=white.
OR-SC6P07SB-06
Clarity 6 and
Clarity 5E
Solid Conductor
Modular Cable
Assemblies
Part No. Formula
OR-SC(X)
(XX)
(X)
(X)
(XX)
6R = Category 6 PVC
Length
in feet
D = double-ended
modular
8 position plug
A = T568A
wired
-06 =
blue
6P = Category 6
plenum
5ER = Category 5e PVC
Example
10 = 10ft
S = single-ended
modular
8 position plug
B = T568B
wired
Clarity 6A/10G patch cords
combining Paralign 2 plug
5E P= Category
termination with a specially
5e plenum
designed Category 6 or
Category 5e horizontal cable,
these Clarity 5E and Clarity 6
performance grade assemblies
serve applications where a
punched down termination
NOTE: To order other standard colors for PVC cables change suffix on MC cords: -02=red,-03=orange,
is required for one end
-04=yellow, -05=green, -06=blue, -08=gray, -09=white.
while the other provides an
Contact sales for other Plenum cable colors.
eight-position plug. Typical
applications include modular
consolidation points or
panel-to-panel cross connects.
63
CLARITY PATCH CORDS
Clarity VoIP Patch Cords
OR-VC607-09
Clarity VoIP
Patch Cords
Ortronics VoIP patch cords
provide an extra low-profile
Clarity plug at one end
to address cable bend
requirements when plugging
into the bottom of an IP
phone set. The other cord
end offers the full protective
attributes of the Paralign
2 plug.
CLARITY 6 UTP
PART NO.
DESCRIPTION
OR-VC603-09
Four-pair 24 AWG Category 6 stranded UTP, white, PVC, length 3´
OR-VC605-09
Four-pair 24 AWG Category 6 stranded UTP, white, PVC, length 5´
OR-VC607-09
Four-pair 24 AWG Category 6 stranded UTP, white, PVC, length 7´
OR-VC609-09
Four-pair 24 AWG Category 6 stranded UTP, white, PVC, length 9´
OR-VC615-09
Four-pair 24 AWG Category 6 stranded UTP, white, PVC, length 15´
NOTE: To order other standard colors change suffix on MC cords: -02=red, -03=orange,
-04=yellow, -05=green, -06=blue, -08=gray, -09=white.
CLARITY PATCH CORDS
Shielded Category 6a, 6 and 5e
OR-MCS603-08
Shielded
Clarity Modular
Patch Cords
A shielded version of the
Paralign 2 plug termination
makes these Clarity
shielded patch cords the
high performance choice
for an STP or FTP 100 ohm
cabling system.
SHIELDED
CLARITY 6A
PART NO.
SHIELDED
CLARITY 6
PART NO.
SHIELDED
CLARITY 5E
PART NO.
DESCRIPTION
OR-MCS6A03-08
OR-MCS603-08
OR-MCS5E03-08
Four-pair 24 AWG
stranded FTP, gray, PVC,
length 3´
OR-MCS6A05-08
OR-MCS605-08
OR-MCS5E05-08
Four-pair 24 AWG
stranded FTP, gray, PVC,
length 5´
OR-MCS6A07-08
OR-MCS607-08
OR-MCS5E07-08
Four-pair 24 AWG
stranded FTP, gray, PVC,
length 7´
OR-MCS6A09-08
OR-MCS609-08
OR-MCS5E09-08
Four-pair 24 AWG
stranded FTP, gray, PVC,
length 9´
OR-MCS6A15-08
OR-MCS615-08
OR-MCS5E15-08
Four-pair 24 AWG
stranded FTP, gray, PVC,
length 15´
OR-MCS6A25-08
OR-MCS625-08
OR-MCS5E25-08
Four-pair 24 AWG
stranded FTP, gray, PVC,
length 25´
NOTE: Clarity 6 is also available in -02 red and -04 yellow.
64
CLARITY PATCH CORDS
Low Smoke Zero Halogen Shielded Category 6a, 6 and 5e
OR-MCSZ610M-08
Low Smoke
Zero Halogen
Shielded Clarity
Modular
Patch Cords
A low smoke, zero halogen,
shielded version of the
Paralign 2 plug terminated
cords makes these Clarity
shielded patch cords the
high performance choice
for an FTP 100 ohm
cabling system.
Low Smoke Zero Halogen Shielded Clarity 6A
PART NO.
DESCRIPTION
OR-MCSZ1010M-04
Category 6a, FTP, LSZH, yellow, 1 meter
OR-MCSZ1020M-04
Category 6a, FTP, LSZH, yellow, 2 meters
OR-MCSZ1030M-04
Category 6a, FTP, LSZH, yellow, 3 meters
OR-MCSZ1050M-04
Category 6a, FTP, LSZH, yellow, 5 meters
Low Smoke Zero Halogen Shielded Clarity 6
PART NO.
DESCRIPTION
OR-MCSZ610M-08
Category 6, FTP, LSZH, gray, 1 meter
OR-MCSZ615M-08
Category 6, FTP, LSZH, gray, 1.5 meters
OR-MCSZ620M-08
Category 6, FTP, LSZH, gray, 2 meters
OR-MCSZ630M-08
Category 6, FTP, LSZH, gray, 3 meters
OR-MCSZ650M-08
Category 6, FTP, LSZH, gray, 5 meters
OR-MCSZ680M-08
Category 6, FTP, LSZH, gray, 8 meters
NOTE: Clarity 6 is also available in -05 green and -06 blue.
Low Smoke Zero Halogen Shielded Clarity 5E
PART NO.
DESCRIPTION
OR-MCSZ5E10M-08
Category 5e, FTP, LSZH, gray, 1 meter
OR-MCSZ5E15M-08
Category 5e, FTP, LSZH, gray, 1.5 meters
OR-MCSZ5E20M-08
Category 5e, FTP, LSZH, gray, 2 meters
OR-MCSZ5E30M-08
Category 5e, FTP, LSZH, gray, 3 meters
OR-MCSZ5E50M-08
Category 5e, FTP, LSZH, gray, 5 meters
OR-MCSZ5E80M-08
Category 5e, FTP, LSZH, gray, 8 meters
NOTE: Clarity 5E is also available in -05 green and -06 blue.
65
CLARITY® 110 PATCH CORDS
Clarity 110 patch cords are ETL verified to TIA-568-B Category 6 and 5e component
standards. More importantly, Clarity 110 plugs utilize an internal signal feedback
technique to control cross talk without compromising impedance. Clarity 110 to
modular 8 position patch cords utilize both signal feedback and center tuning. This
allows more transparent connector interfaces for significant elevation of channel
performance that can be field measured.
n Verified to TIA component specifications to ensure component performance
n Internal signal feedback of the 110 plug design controls noise contributors
n Center tuned Paralign™ 2 modular plug design controls the plug for a transparent
mated union
n Assembled with premium cordage for performance, reliability, and long life
n Factory tested for performance to ensure consistent reliability
Clarity UTP 110/110 Patch Cords
OR-110C607-06
CLARITY 6 UTP
PART NO.
CLARITY 5E UTP
PART NO.
DESCRIPTION
OR-110C603-06
OR-110C5E03-06
110/110 four-pair patch
cord, blue, length 3´
OR-110C605-06
OR-110C5E05-06
110/110 four-pair patch
cord, blue, length 5´
OR-110C607-06
OR-110C5E07-06
110/110 four-pair patch
cord, blue, length 7´
OR-110C609-06
OR-110C5E09-06
110/110 four-pair patch
cord, blue, length 9´
OR-110C615-06
OR-110C5E15-06
110/110 four-pair patch
cord, blue, length 15´
NOTE: To order other standard colors, change suffix:
-06 = blue, -05 = green, -09 = white.
Clarity UTP 110/Modular 8-Position Patch Cords
OR-MC18B603-06
CLARITY 6 UTP
PART NO.
CLARITY 5E UTP
PART NO.
DESCRIPTION
OR-MC18B603-06
OR-MC18B5E03-06
110 four-pair patch cord,
T568B, blue, length 3´
OR-MC18B605-06
OR-MC18B5E05-06
110 four-pair patch cord,
T568B, blue, length 5´
OR-MC18B607-06
OR-MC18B5E07-06
110 four-pair patch cord,
T568B, blue, length 7´
OR-MC18B609-06
OR-MC18B5E09-06
110 four-pair patch cord,
T568B, blue, length 9´
OR-MC18B615-06
OR-MC18B5E15-06
110 four-pair patch cord,
T568B, blue, length 15´
NOTE: To order other standard colors, change suffix:
-06 = blue, -05 = green, -09 = white.
66
CUSTOM ASSEMBLIES
OR-845EPLPL005-1GY
Category 5e 25-Pair Cable
Assemblies (stock lengths)
Ortronics Category 5e 25-pair cable
assemblies use premium Category 5e
cable and high performance 50-pin
connectors to support multicircuit
connections between hubs and panels
or between panels.
OR-845PSPS005-1GY
Custom Length Category 5e
25-Pair Cable Assemblies
Terminated Male/Male, 110º Left Exit
PART NO.
DESCRIPTION
OR-845EPLPL005-1GY
Category 5e, 25-pair cable assembly,
M/M, gray PVC, length 5´
OR-845EPLPL007-1GY
Category 5e, 25-pair cable assembly,
M/M, gray PVC, length 7´
OR-845EPLPL010-1GY
Category 5e, 25-pair cable assembly,
M/M, gray PVC, length 10´
OR-845EPLPL025-1GY
Category 5e, 25-pair cable assembly,
M/M, gray PVC, length 25´
Part No. Formula
OR-XXXX
XX
XXX
-X or -XXX
ASSEMBLY
TYPE
TYPE OF
CABLE ENDS
LENGTH
IN FEET
TYPE OF
CABLE
OR-845E
(Category 5e)
PR, PS, XX
5, 10, 15, 25
4 or 1GY
Example: OR-845EPRPS025-4
Type of Cable Ends: PL = Male 110° left exit
PS= Male 180°
Type of Cable:
OR-801025PC005-1GY
25-Pair Cable Assemblies
Ortronics voice/data/LAN 25-pair cable
assemblies are constructed from 24 AWG
solid conductor UTP cables terminated
with industry standard 50-pin telco
connectors.
Part No. Formula
1GY= 24 AWG Gray PVC
PR= Make 110º right exit
XX= Blunt, not terminated
4 = 24 AWG Plenum
OR-XXXX
XX
XXX
-X or -XXX
ASSEMBLY
TYPE
TYPE OF
CABLE ENDS
LENGTH
IN FEET
TYPE OF
CABLE
OR-845E
Category 5e)
P, C, X
5, 10, 15, 25
1GY or 4
OR-801025
(Cat 3)
P, C, X
5, 10, 15, 25
1GY or 4
Examples: OR-804025PC015-1GY, OR-801025PC010-1GY
Type of Cable Ends:
Type of Cable:
P = Male 90°
C = Female 90°
1GY= 24 AWG Gray PVC
XX= Blunt, not terminated
4 = 24 AWG Plenum
NOTE: Consult sales for other custom requirements and for lead times and
minimum orders.
67
H IGH P E RF ORM A N C E S T R U C T U R E D C A BLIN G
PR OD UCT S & S O L U T I O N S
COPPER CONNECTIVITY
Industrial
Solutions
Industrial
Jacks
69
P.
Industrial
Plates and
Surface
Boxes
69
P.
Bringing data cabling systems into your industrial space
comes with a new set of challenges that must be addressed
in order to ensure the reliability of your cabling and
connectivity. Ortronics provides an offering of connectivity
products designed to meet the environmental challenges of
industrial / lab / harsh environments as well as meeting
standard data transmission requirements. The offering starts
with IP67-rated Category 5e and Category 6 connectors,
Industrial
Patch Cords
69
P.
housings and patch cords. What is IP67? IP stands for Ingress
Protection, the ability to withstand the influence of external
environmental influences. The IP number is composed of
2 digits. The first digit refers to protection against solid objects
(dust is an example). The larger this number is, the smaller
the particle of matter has to be to penetrate the protection.
A number 6 indicates “total protection against dust.” The
second digit describes the protection level against liquids.
A number 7 indicates “protected against the effects of
immersion between 15 cm and 1 meter.” An IP67 rating
would surpass IP66 and is an optimum rating for a factory
environment where exposure to dirt, dust, other particulate,
splash & wash downs is likely.
F E AT U R E D P R O D U C T S
INDUSTRIAL JACKS, PLATES AND BOXES
NOTE: Product dimensions are listed by width, height and depth unless specified otherwise.
Ortronics range of Industrial Grade connectivity meets IP67 while supplying the quality cabling performance you have long
associated with Ortronics. Industrial grade jacks, patch panels, and patch cords are available in Category 5e & 6 performance
grades. A supporting offering of industrial grade faceplates and surface boxes include gaskets, seals and sealing plugs to
support
IP67 level protection through the equipment outlet. Industrial faceplates are stainless steel with gaskets. Industrial boxes
utilize UL 94V0 chemically resistant plastic bases with stainless steel cover plates.
Industrial IP67 IDC Jacks
OR-IPJ6, OR-IPJ5E
PART NO.
DESCRIPTION
OR-IPJ6
Category 6 industrial jack, IP67, black with
protective cover cap
OR-IPJ5E
Category 5e industrial jack, IP67, black with
protective cover cap
PART NO.
DESCRIPTION
OR-403IPSS11
Industrial stainless steel plate, 1-port single gang
plate, 2.75˝ x 4.5˝
OR-403IPSS12
Industrial stainless steel plate, 2-port single gang
plate, 2.75˝ x 4.5˝
Stainless Steel IP67 Industrial Faceplates
OR-403IPSS11
OR-403IPSS12
Industrial IP67 Surface Boxes with Stainless Steel Covers
OR-404IP22
OR-404IP24
PART NO.
DESCRIPTION
OR-404IP22
2-port industrial grade box, cover and watertight
cable gaskets & plugs, 5˝ x 5˝
OR-404IP24
4-port industrial grade box, cover and watertight
cable gaskets & plugs, 5˝ x 5˝
PART NO.
DESCRIPTION
OR-IPC603-00
Category 6 industrial patch cord, 3´, black
OR-IPC605-00
Category 6 industrial patch cord, 5´, black
OR-IPC607-00
Category 6 industrial patch cord, 7´, black
OR-IPC6010-00
Category 6 industrial patch cord, 10´, black
OR-IPC6015-00
Category 6 industrial patch cord, 15´, black
OR-IPC6020-00
Category 6 industrial patch cord, 20´, black
OR-IPC6025-00
Category 6 industrial patch cord, 25´, black
PART NO.
DESCRIPTION
OR-IPC5E03-00
Category 5e industrial patch cord, 3´, black
OR-IPC5E05-00
Category 5e industrial patch cord, 5´, black
OR-IPC5E07-00
Category 5e industrial patch cord, 7´, black
OR-IPC5E010-00
Category 5e industrial patch cord, 10´, black
OR-IPC5E015-00
Category 5e industrial patch cord, 15´, black
OR-IPC5E020-00
Category 5e industrial patch cord, 20´, black
OR-IPC5E025-00
Category 5e industrial patch cord, 25´, black
INDUSTRIAL PATCH CORDS
Industrial IP67 IDC Jacks
OR-IPC6010-00
69
H IGH P E RF ORM A N C E S T R U C T U R E D C A BLIN G
PR OD UCT S & S O L U T I O N S
COPPER CONNECTIVITY
110 Cross
Connect System
Clarity 6 and
Clarity 5E 110
Block Kits
110 Accessories
110 Panels
Pre-Wired
66 Blocks
Ortronics Clarity® 6 and Clarity 5E blocks further expand the
high performance data opportunities for 110 blocks. Offering
field terminated block kits to rack or backboard mounted
cross connect assemblies, Ortronics has a 110 product to
meet your application needs for performance, high density
and quick termination. Ortronics also offers a range of
pre-wired 66 blocks to serve as a network demarcation point
or for voice or low speed data applications.
F E AT U R E D P R O D U C T S
Clarity 6
110 Blocks
72
P.
P.72
Clarity 6
Category 6
110 Block Kits
P.72
Clarity 5E
Category 5e
110 Block Kits
P.73
Designation
Labeling Kits
P.73
110 Jumper
Troughs
P.73
19˝ Wide
Rack Mount
110 Panel Kits
P.74
110 Wall Mount
Cross Connect
Block Kits
P.75
110 Wall Mount
Backboards
and Cable
Management
P.76
110 Frames
and Cable
Management
P.72
110 Wiring
Blocks for
Voice/Data
P.77
Pre-Wired
66 Blocks
110 C
Connecting
Block Clips
for Voice
110 Wall
Mount
Backboard
Channels
P.
P.
72
75
CLARITY® 6 AND CLARITY 5E 110 BLOCK KITS
NOTE: Product dimensions are listed by width, height and depth unless specified otherwise.
The Clarity family of 110 blocks combines Category 6 and 5e performance with the ease and reliability of 110 termination
and installer friendly features all within the traditional 110 block footprint. Clarity blocks are available in 50, 100, and 300pair
sizes, and provide designation areas and rear cable entry. Clarity 6 blocks use a signal feedback technique internal to the
C6110C4 connector to control crosstalk without compromising impedance. Clarity 6 and Clarity 5E block kits include base
wiring block, 110C connecting blocks and label holders for designation.
Clarity 6 Category 6 110 Block Kits
OR-110ABC6100 with legs
OR-110ABC6100 with legs
PART NO.
DESCRIPTION
OR-110ABC6050
with legs
48-pair (12 4-pair clips) 50-pair footprint,
1.8˝ x 10.72˝ x 3.25˝
OR-110ABC6100
with legs
96-pair (24 4-pair clips) 100-pair footprint,
3.59˝ x 10.72˝ x 3.25˝
OR-110ABC6300
with legs
288-pair (72 4-pair clips) 300-pair footprint,
10.79˝ x 10.72˝ x 3.25˝
OR-110DBC6050
without legs
48-pair (12 4-pair clips) 50-pair footprint,
1.8˝ x 8.5˝ x 1.59˝
OR-110DBC6100
without legs
96-pair (24 4-pair clips) 100-pair footprint,
3.59˝ x 8.5˝ x 1.59˝
OR-110DBC6300
without legs
288-pair (72 4-pair clips) 300-pair footprint,
10.79˝ x 8.5˝ x 1.59˝
PART NO.
DESCRIPTION
OR-110ABC5E050
with legs
50-pair (10 4-pair and 2 5-pair clips),
1.8˝ x 10.72˝ x 3.25˝
OR-110ABC5E100
with legs
100-pair (20 4-pair and 4 5-pair clips),
3.59˝ x 10.72˝ x 3.25˝
OR-110ABC5E300
with legs
300-pair (60 4-pair and 12 5-pair clips),
10.79˝ x 10.72˝ x 3.25˝
OR-110DBC5E050
without legs
50-pair (10 4-pair and 2 5-pair clips),
1.8˝ x 8.5˝ x 1.59˝
OR-110DBC5E100
without legs
100-pair (20 4-pair and 4 5-pair clips),
3.59˝ x 8.5˝ x 1.59˝
OR-110DBC5E300
without legs
300-pair (60 4-pair and 12 5-pair clips),
10.79˝ x 8.5˝ x 1.59˝
PART NO.
DESCRIPTION
OR-30200145
with legs
100-pair, 3.59˝ x 10.72˝ x 3.25˝
OR-30200007
with legs
300-pair, 10.79˝ x 10.72˝ x 3.25˝
OR-30200143
without legs
100-pair, 3.59˝ x 8.5˝ x 1.59˝
OR-30200022
without legs
300-pair, 10.79˝ x 8.5˝ x 1.59˝
PART NO.
DESCRIPTION
OR-30200108
Three-pair (110C3)
OR-30200109
Four-pair (110C4)
OR-30200110
Five-pair (110C5)
Clarity 5E Category 5e 110 Block Kits
OR-110ABC5E100 with legs
OR-110DBC5E100 without legs
110 Wiring Blocks for Voice/Data
OR-30200145 with legs
110 Wiring Blocks for Voice/Data
OR-30200108
NOTE: Package of 10.
72
110 ACCESSORIES
NOTE: Product dimensions are listed by width, height and depth unless specified otherwise.
Designation Labeling Kits
OR-70400646
for blocks with legs
OR-70400680
for blocks without legs
OR-70400272
PART NO.
DESCRIPTION
OR-70400646
for blocks with legs
Package of two for Clarity 110 Blocks, end
label caps, clear strips and paper inserts
OR-70400680 for
blocks without legs
Package of two for Clarity 110 Blocks, short
end caps, clear strips and paper inserts
OR-70400272*
Package of two clear strips and white paper
*Not compatible with Clarity 6 Blocks.
110 Jumper Troughs
OR-30200139
OR-30200140
PART NO.
DESCRIPTION
OR-30200139
Without legs, 8.5˝ x 2.69˝ x 2.69˝
OR-30200140
With legs, 10.75˝ x 2.69˝ x 4.69˝
110 PANELS
Ortronics 110 Block Panels provide two 100-pair block kits and two jumper troughs (without legs) on a 19˝ wide panel that is
mountable to the Ortronics Mighty Mo® rack system or to other EIA racks.
19˝ Rack Mount 110 Panel Kits
OR-302003282
OR-302003251
PART NO.
DESCRIPTION
OR-302003282
Clarity 6 192-pair Category 6 panel kit with
troughs, 48 Category 6 110C4, 19˝ x 7˝
OR-302003251
Category 5e 200-pair panel kit with troughs,
40-110C4 and 8-110C5 clips, 19˝ x 7˝
OR-302003253
Category 5e 200-pair panel kit with troughs,
40-110C5 clips, 19˝ x 7˝
PART NO.
DESCRIPTION
OR-30600167
Panel for two 100-pair blocks without legs,
19˝ x 3.5˝
OR-30600150
Panel for two 100-pair blocks and two
troughs without legs, 19˝ x 7˝
19˝ Rack Mount 110 Panel (Unloaded)
OR-30600167
OR-30600150
73
110 panels
110 Wall Mount Cross Connect Block Kits
900-Pair Panel
Instruction Sheet
PRODUCT CODE
PART NO. / TERMINAL BLOCKS
Clarity 6 110 Wall Mount
Cross Connect Block Kits
OR-110PBC6900
300-Pair Panel
01
01 01090202010202216 09 0906
Bottom Tray
OR-110PBC6300
OR-30200139
01 0101030202010202 72 03 0302
Jumper Trough
OR-30200026110-PB2-900FT
10-32x5/8 Phillips Head Screw
OR-30200024110-PA2-900FT
10-32 Nut
01
01 0109020201020218036 09 0906
Grounding Bar
OR-30200020110-PB2-300FT
#12-14x5/8 Phillips Head Screw
01
01 01090202010202 180 09 0906
#12 Ext. Lock Washer
OR-30203461110-PA2-300FT
110C-4 Connecting Block
01 0101030202010202 6012 03 0302
110C-5 Connecting Block
OR-30200095110-AA2-300FT
OR-30200145
110 AW4-100 Wiring Block w/legs
01 0101030202010202 60 03 0302
OR-30200143
OR-3020351910-AB2-300FT
110 DW4-100 Wiring Block
60
01
03
OR-30200007
110 AW4-300 Wiring Block w/legs
OR-30200116110-AA2-100FT
OR-70400272
60
12
01
03
Holder/Insert, Designation
OR-30203506110-AB2-100FT
OR-70300030
20
01
01
KIT CONTENTS
Rivet/12 per package
20
04
01
01
110 - PB2 - 300FT
110 110 Family of Terminal Blocks
A = Includes 110 Type Wiring Blocks with legs / P = Includes 110 Type
P
Wiring Blocks on a back panel with horizontal troughs and bottom tray
B
A = 5-pair 110 Type Connecting Blocks / B = 4-pair 110 Type Connecting Blocks
2
Voice/Data / C6 = Category 6
300 Total quantity of pairs
FT Field terminated
PART NO.
Explanation of Terminal Blocks Product Code
Voice/Data Wall Mount
Block Kits
Ortronics wall mount 110 field term kits are available in 100-,
300-, and 900-pair configurations. 300- and 900-pair kits can be
ordered with metal back panels and horizontal wiring troughs.
TERMINAL BLOCKS
PRODUCT CODE*
NOTE: Product dimensions are listed by width, height and depth unless specified otherwise.
NOTE: See page 53 for color-coded designation strips. See page 75 for 110 wall mount cable management.
74
PRE-WIRED 66 BLOCKS
110 Wall Mount Backboards and Cable Management
NOTE: Product dimensions are listed by width, height and depth unless specified otherwise.
OR-806003246
OR-30200132
OR-806003194
110 Wall Mount
Backboard Channels
Ortronics 110 backboard
channels are wall mount kits,
complete with hardware to
mount 100-pair 110 blocks
without legs and jumper troughs
without legs. Channels provide
protected paths for terminated
cables. Kits include bottom cable
trough and grounding bar.
110 Wall Mount
Backboard Channels
Ortronics single or dual channel
vertical channels wall mount
between 110 wall mount backboards to provide a managed
path for patch cords or cross
connect wire. The dual
channel provides an added
ability to separate cable types
in vertical management.
OR-60400020
110 Wall Mount
Horizontal Cable
Management Bracket
PART NO.
DESCRIPTION
OR-806003246
300-pair backboard, 8.5˝ x 24.75˝ x 8.13˝
OR-30200132
900-pair backboard, 8.5˝ x 62.63˝ x 8.13˝
Single Channel
PART NO.
DESCRIPTION
OR-806003194
300-pair backboard size, 8.5˝ x 23.88˝ x 8.13˝
OR-806003196
900-pair backboard size, 8.5˝ x 61.75˝ x 8.13˝
Dual Channel
PART NO.
DESCRIPTION
OR-806003197
300-pair backboard size, 8.5˝ x 23.88˝ x 8.13˝
OR-806003199
900-pair backboard size, 8.5˝ x 61.75˝ x 8.13˝
PART NO.
DESCRIPTION
OR-60400020
10.75˝ x 6.5˝ x 4.5˝
Ortronics horizontal cable
management brackets wall
mount between 110 wiring
blocks to organize, support
and provide for future changes
to horizontal runs of cable.
75
PRE-WIRED 66 BLOCKS
110 Frames and Cable Management
NOTE: Product dimensions are listed by width, height and depth unless specified otherwise.
OR-MM67110D
Mighty Mo® 6 110D
Distribution Frame
PART NO.
DESCRIPTION
OR-MM67110D
39˝ x 86˝ x 16.50˝
PART NO.
DESCRIPTION
OR-30600166
34.25˝ x 14.54˝
Mighty Mo 6 Vertical
Cable Management
Cage with Latches
PART NO.
DESCRIPTION
OR-MM6VML704
With latches, 4˝ x 6˝ x 7´, rack units
Patented design promotes
efficient routing of patch cords
between racks. Hinged latches
allow easy access during moves,
adds, and changes. 6˝ wide
cage creates a 2.5˝ gap between
racks for front-to-back routing
of equipment cables and
patch cords.
OR-MM6VML706
With latches, 6˝ x 6˝ x 7´, rack units
Ortronics Mighty Mo 6 110D
Distribution Frame provides total
vertical cable management to
route cable more effectively in
a 110 cross connect. Use with
OR-30600166 to mount
300-pair 110 blocks with legs.
Front and rear mounting supports
up to 9000 pairs. Includes cable
management straps in 6.5˝ deep
vertical channels. Color is black.
OR-30600166
900-Pair Rack Mount
Panel with Cable
Troughs
Accepts three 300-pair
110 blocks with legs.
OR-MM6VML706
76
NOTE: Includes all hardware necessary to mount cage on face of
two Mighty Mo 6 racks, single rack or end of row.
Patent No. 6,365,834
PRE-WIRED 66 BLOCKS
NOTE: Product dimensions are listed by width, height and depth unless specified otherwise.
OR-805003202
Pre-Wired 66 Blocks
Ortronics pre-wired 66 blocks
can be used to provide network
interface connections between
voice and data equipment and
the public telco network as well
as modular wiring connections for
key telephone systems.
OR-8050M157B
PART NO.
DESCRIPTION
OR-805003202
T1 network interface block, 66M150
66 block eight-port, RJ48X, on 89D, 16-pair,
10˝ x 2.84˝ x 2.71˝
OR-8050F157B
Modular 66 connecting block with two
25-pair female telcos on 89D, 50-pair,
10˝ x 2.84˝ x 2.71˝
OR-8050F66M150
Modular 66M150 connecting block with one
25-pair female telco on left side on 89D, 25-pair,
10˝ x 2.84˝ x 2.71˝
Modular 66 connecting block on 89D with one
OR-8050M66M150 25-pair male telco on left side, 25-pair,
10˝ x 2.84˝ x 2.71˝
77
H IGH P E RF ORM A N C E S T R U C T U R E D C A BLIN G
PR OD UCT S & S O L U T I O N S
Physical
Support
Mighty Mo Cable
Management
Systems
EuroLine
Cabinets
Mighty Mo
Cabinets
Mighty Mo
Air Control
Complete cable management maximizes your network’s
performance. It may be a small portion of your overall
network investment, but the proper infrastructure layout
can yield enormous returns. The right cable management
Horizontal Cable
Management,
Shelves & Access.
system can protect and extend the life of your network.
Ortronics® Mighty Mo® advanced cable management
systems provide strength and support, and flexibility for
system design and future expansion. No other system
makes it easier to install your network with standards
Bonding &
Grounding
compliant bend radius, cable routing and strain relief,
ensuring optimal network performance.
F E AT U R E D P R O D U C T S
Ortronics is a solution
developer partner
within the Cisco
Developer Network
Mighty Mo
Cable
Management
Racks
80
P.
P.80
Mighty Mo 10 Cable
Management Racks
& Accessories
P.84
Mighty Mo
Cable Management
Accessories
P.87
Mighty Mo 6
Horizontal
Management
and Equipment
Shelves
P.92
EuroLine
Network
Cabinets
P.93
EuroLine
Wall Mount
Cabinets
P.94
EuroLine
Cabinet
Accessories
P.97
Mighty Mo
Pre-Configured
Cabinets
P.100
Mighty Mo
Cabinet
Accessories
P.108
Mighty Mo Wall
Mount Cabinets
& Accessories
P.112
Air Curtain
System
P.116
Air Plugs
P.116
Air Disrupters
P.119
Cable
Management
Panels
P.122
Equipment
Shelves
P.124
Rack and
Cabinet
Accessories
P.128
Bonding &
Grounding
Mighty Mo
Cabinets
Mighty Mo
Air Control
P.
P.
97
111
MIGHTY MO® CABLE MANAGEMENT SYSTEM
The patented Mighty Mo advanced racking system is
specifically designed for higher density cabling system
applications such as data centers, SANs, and main
cross connect areas. It is easy to assemble and offers many configuration options, extra vertical cable
capacity, and other functional and aesthetic elements.
The Mighty Mo system features an innovative vertical
management “cage” with individual 1-rack unit fingers
and a double-hinged door. Horizontal cable managers,
available with covers, are designed to match the layout
of Ortronics® Clarity® patch panels. Mighty Mo racks
and accessories work together to mount, manage and
organize virtually any structured cabling equipment and
provide a unified, streamlined look.
Choose from the new Mighty Mo 10 rack, specifically
designed to improve airflow in data centers, or the
Mighty Mo 6 for standard lAN applications.
nPatented channel construction has built-in strain relief,
bend radius control, and cable routing with floor and
ceiling access to distribution cables
nTop trough with built-in waterfall provides bend radius
control and efficient patch cable routing
n
Vented double hinged front and rear doors are available for
additional security on Mighty Mo 6 and Mighty Mo 10 racks
nCan be assembled as a 19˝ or 23˝ rack. No additional
hardware required; no need for two sizes of racks
nUnless otherwise noted, all Mighty Mo 6 and Mighty
Mo 10 components are compatible with both racks
MIGHTY MO CABLE MANAGEMENT SYSTEM
Mighty Mo 10 Cable Management Racks
NOTE: Product dimensions are listed by width, height and depth unless specified otherwise.
OR-MM10716
Mighty Mo 10 Cable
Management Racks
Mighty Mo 10 racks are designed
to maximize the airflow of network
equipment. Honeycomb side rails
and baffles combine to manage
intake and exhaust air, creating cold
aisle/hot aisle air distribution from
side vented equipment. The bottom
flange turns inward, allowing it to fit
on a 2´ x 2´ floor tile. Black.
OR-MM107SVR
Mighty Mo 10 Server Rack
The Mighty Mo 10 Server Rack
works with all of the Mighty Mo 6 and
10 racks and cable management. The
mounting rails adjust from 12.5˝ to 30˝,
independent of the structural members
allowing the rails to be adjusted after
the rack is installed. Mighty Mo vertical
managers can be mounted front or
rear. Black.
PART NO.
DESCRIPTION
OR-MM10716
16.25˝ channel depth, 7´ high,
black, 45 rack units
OR-MM10816
16.25˝ channel depth, 8´ high,
black, 51 rack units
NOTE: Static capacity: 1,500 lbs. Assembly required. Patent pending.
Mighty Mo Speednut
Faster Assembly!
Included with every Mighty Mo
cable management rack! The
Mighty Mo Speednut increases
the speed and ease of assembly
while adding extra strength to your
racks. Hold the Speednut behind
the rack while hand tightening the
bolts in front. Speednut eliminates
the need for a second wrench!
PART NO.
DESCRIPTION
OR-MM107SVR
Four-post aluminum frame,
supplied with 50 #12-24 cage nuts
and screws, 45 rack units, 7´ high
OR-MM107SVRABR
Server rack baffle rail for mounting
16.25˝ airflow baffles to 7´ server
rack when rails are spaced at 30˝
OR-MM108SVR
Four-post aluminum frame,
supplied with 50 #12-24 cage nuts
and screws, 51 rack units, 8´ high
NOTE: Static capacity: 1,500 lbs. (evenly distributed)
Assembly required.
80
MIGHTY MO® CABLE MANAGEMENT SYSTEM
Mighty Mo 10 Rack Accessories
NOTE: Product dimensions are listed by width, height and depth unless specified otherwise.
OR-MM10VMD712
Mighty Mo 10 Cable
Management Cage
with Door
Cage design promotes efficient routing
of patch cords between racks. Hinged
doors allow easy access during moves,
adds, and changes. 16˝ wide cage
creates a 12.25˝ gap between racks.
12˝ wide cage creates a 8.25˝ gap
between racks for front-to-back routing
of equipment cables and patch cords.
Both are supplied with four spools and
12 bend-limiting clips. Black.
OR-MM10AB71612
Mighty Mo 10
Airflow Baffles
Mighty Mo 10 airflow baffles mount
between racks and direct intake and
exhaust air on side flow network
equipment from cold aisle to hot
aisle. Black.
PART NO.
DESCRIPTION
OR-MM10VMD712
With door, 12.13˝ x 13˝ x 7´
OR-MM10VMD716
With door, 16.38˝ x 13˝ x 7´
OR-MM10VMD812
With door, 12.13˝ x 13˝ x 8´
OR-MM10VMD816
With door, 16.38˝ x 13˝ x 8´
NOTE: All cable managers include hardware necessary to mount the
cage on the face of two Mighty Mo 6 or 10 racks.
Patent Numbers 6,946,605, 6,968,647 and 7,026,553
PART NO.
DESCRIPTION
OR-MM10AB71612
For use with 7´ x 16˝ Mighty Mo 10
rack and 12˝ wide Mighty Mo 10 cage
OR-MM10AB71616
For use with 7´ x 16˝ Mighty Mo 10
rack and 16˝ wide Mighty Mo 10 cage
OR-MM10AB73012
For use with 7´ Mighty Mo 10 Server
Rack and 12˝ wide Mighty Mo 10 cage
when rails are spaced at 30˝ apart
OR-MM10AB73016
For use with 7´ Mighty Mo 10 Server
Rack and 16˝ wide Mighty Mo 10 cage
when rails are spaced at 30˝ apart
OR-MM10AB81612
For use with 8´ x 16˝ Mighty Mo 10
rack and 12˝ wide Mighty Mo 10 cage
OR-MM10AB81616
For use with 8´ x 16˝ Mighty Mo 10
rack and 16˝ wide Mighty Mo 10 cage
OR-MM10AB83012
For use with 8´ Mighty Mo 10 Server
Rack and 12˝ wide Mighty Mo 10 cage
when rails are spaced at 30˝ apart
OR-MM10AB83016
For use with 8´ Mighty Mo 10 Server
Rack and 16˝ wide Mighty Mo 10 cage
when rails are spaced at 30˝ apart
NOTE: Includes all hardware necessary to mount between two
Mighty Mo 10 racks. Not intended for use with Mighty Mo 6
racks. Patent pending.
OR-MM10VDA7248
Mighty Mo 10 Vented
Door Assemblies
Door design allows mounting to
the front or rear of any Mighty Mo 6
or Mighty Mo 10 rack. The doublehinged door pivots to the right or
left and is easily removed. Black.
PART NO.
DESCRIPTION
OR-MM10VDA7248
7´ x 24˝ with 8.38˝ of clearance
behind door for use with
VMD-style vertical managers
OR-MM10VDA7244
7´ x 24˝ with 4.38˝ of clearance
behind door for use without
vertical managers
OR-MM10VDA8248
8´ x 24˝ with 8.38˝ of clearance
behind door for use with
VMD-style vertical managers
OR-MM10VDA8244
8´ x 24˝ with 4.38˝ of clearance
behind door for use without
vertical managers
NOTE: Door designed to work with Mighty Mo racks assembled
in the 19˝ configuration.
81
MIGHTY MO® CABLE MANAGEMENT SYSTEM
Mighty Mo 10 Rack Accessories
NOTE: Product dimensions are listed by width, height and depth unless specified otherwise.
OR-MM1070206VCT
Vertical Cable Trays
for Mighty Mo 10
Server Rack
Vertical cable trays consist of a
pre-cut section of 2˝ x 6˝ Cablofil®
cable tray and mounting hardware
designed to mount on the rack and
manage distribution cables routing
from the patch panel and equipment
out of the rack. It mounts to the strut
on the rack and can be adjusted front
to back.
PART NO.
DESCRIPTION
Vertical cable tray 2˝ wide x 6˝
OR-MM1070206VCT deep for the Mighty Mo 10 7 foot
server rack
Vertical cable tray 2˝ wide x 6˝
OR-MM1080206VCT deep for the Mighty Mo 10 8 foot
server rack
MIGHTY MO CABLE MANAGEMENT SYSTEM
Mighty Mo 6 Cable Management Racks
OR-MM6710
Mighty Mo 6 Cable
Management Racks
Mighty Mo 6 racks are available
in 6.5˝, 10.5˝ and 16.25˝ channel
depths. The 16.25˝ size is designed
specifically for large and heavy
network equipment. The bottom
flange on the 16.25˝ standard rack
turns inward, allowing it to fit on
a 2´ x 2´ floor tile.
PART NO.
DESCRIPTION
OR-MM6706
6.5˝ channel depth, 7´, high,
black, 45 rack units
OR-MM6710
10.5˝ channel depth, 7´, high,
black, 45 rack units
OR-MM6716
16.25˝ channel depth, 7´, high,
black, 45 rack units
OR-MM6810
10.5˝ channel depth, 8´, high,
black, 51 rack units
OR-MM6816
16.25˝ channel depth, 8´, high,
black, 51 rack units
NOTE: Static capacity 1,500 lbs. Assembly required.
Patent No. D360,189
OR-MM6716
82
Mighty Mo Speednut
Faster Assembly!
Included with every Mighty Mo
cable management rack! The
Mighty Mo Speednut increases
the speed and ease of assembly
while adding extra strength to your
racks. Hold the Speednut behind
the rack while hand tightening the
bolts in front. Speednut eliminates
the need for a second wrench!
MIGHTY MO® CABLE MANAGEMENT SYSTEM
Mighty Mo 6 Vertical Management
NOTE: Product dimensions are listed by width, height and depth unless specified otherwise.
OR-MM6VMD710
Mighty Mo 6 Cable
Management Cage
with Door
Cage design promotes efficient
routing of patch cords between
racks. Hinged doors allow easy
access during moves, adds, and
changes. 10˝ wide cage creates a
6.5˝ gap between racks. 6˝ wide
cage creates a 2.5˝ gap between
racks for front-to-back routing of
equipment cables and patch cords.
Both are supplied with four spools
and 12 bend-limiting clips. Black.
OR-MM6VMS704
Mighty Mo 6 Vertical
Cable Management
Cage with Cover
Cage design promotes efficient routing
of patch cords between racks. Dual
snap on hinged covers allow easy
access during moves, adds, and
changes. 6˝ wide cage creates a 2.5˝
gap between racks for front-to-back
routing of equipment cables and
patch cords. 6˝ wide cage is supplied
with four spools and 12 bend limiting
clips. Black.
OR-MM6VML706
Mighty Mo 6 Vertical
Cable Management
Cage with Latches
Patented design promotes efficient
routing of patch cords between racks.
Hinged latches allow easy access
during moves, adds, and changes.
6˝ wide cage creates a 2.5˝ gap
between racks for front-to-back
routing of equipment cables and
patch cords. Black.
PART NO.
DESCRIPTION
OR-MM6VMD706
With door, 6˝ x 8˝ x 7´
OR-MM6VMD710
With door, 10˝ x 13˝ x 7´
OR-MM6VMD806
With door, 6˝ x 8˝ x 8´
OR-MM6VMD810
With door, 10˝ x 13˝ x 8´
NOTE: All cable managers include hardware necessary to mount
the cage on the face of two Mighty Mo 6 racks. The 6˝ wide model
contains gusset brackets and is recommended for a single rack or
end of a row.
Patent Numbers 6,946,605, 6,968,647 and 7,026,553
PART NO.
DESCRIPTION
OR-MM6VMS704
With cover, 4˝ x 7˝ x 7´
OR-MM6VMS706
With cover, 6˝ x 7˝ x 7´
OR-MM6VMS804
With cover, 4˝ x 7˝ x 8´
OR-MM6VMS806
With cover, 6˝ x 7˝ x 8´
NOTE: Includes all hardware necessary to mount cage on face
of two Mighty Mo 6 racks, single rack or end of row.
Patent Numbers 6,946,605 and 7,026, 553
PART NO.
DESCRIPTION
OR-MM6VML704
With latches, 4˝ x 6˝ x 7´
OR-MM6VML706
With latches, 6˝ x 6˝ x 7’
NOTE: Includes all hardware necessary to mount cage on face
of two Mighty Mo 6 racks, single rack or end of row.
Patent No. 6,365,834
83
MIGHTY MO® CABLE MANAGEMENT SYSTEM
Mighty Mo Cable Management Accessories
NOTE: Product dimensions are listed by width, height and depth unless specified otherwise.
OR-MM10WFE
Mighty Mo 10
Waterfall Extension
PART NO.
DESCRIPTION
OR-MM10WFE
Increases the height of the front
flange of the Mighty Mo waterfall
by 2.25˝ when additional cable
capacity is required. Black
NOTE: Fits all Mighty Mo 10, 6 and 3 waterfalls.
OR-60400614
Cable Management Rings
These black plastic rings flex at the
end for easy insertion or removal of
cross connect cables. They snap in
place on the front and back of the
Mighty Mo racks. Black.
PART NO.
DESCRIPTION
OR-60400614
Snap-type, 1.75˝ x 6˝, package of 14
OR-60400542
Snap-type, 1.75˝ x 6˝, package of 2
OR-60400314
Snap-type, 1.75˝ x 3˝, package of 14
OR-60400302
Snap-type, 1.75˝ x 3˝, package of 2
NOTE : No hardware needed.
OR-60400017
Cable Management Rings
These rings allow efficient routing
of patch or cross connect cables
between distribution racks. They
can be mounted where needed on
the front and back of the Mighty Mo
racks. Black.
OR-MM6CMS8
Mighty Mo Cable
Management Spools
Cable management spools effectively
manage excess copper or fiber cable
slack. They mount at rack unit
intervals, providing flexibility and
proper bend radius for cables on the
front of the 6˝ wide cage with door or
on the front and rear of the 10˝ wide
cage with door. Set of four. Black.
OR-MM6BLC
Mighty Mo Bend
Limiting Clip
Bend limiting clips snap on to any
finger on the vertical management
cage to provide bend limitation for
fiber jumpers entering and exiting
the cage. Set of 12. Black.
84
PART NO.
DESCRIPTION
OR-60400017
2˝ x 6˝, package of 14, Black
OR-60400062
2˝ x 6˝, package of 2, Black
NOTE : Includes mounting hardware.
PART NO.
DESCRIPTION
OR-MM6CMS10
11˝ long for 10˝ vertical
management cage with door
OR-MM6CMS8
8˝ long for 10˝ vertical
management cage with door
OR-MM6CMS6
6˝ long for 6˝ vertical
management cage with door
PART NO.
DESCRIPTION
OR-MM6BLC
3.25˝ long for vertical management
cages with door or cover
MIGHTY MO® CABLE MANAGEMENT SYSTEM
Mighty Mo Cable Management Accessories
NOTE: Product dimensions are listed by width, height and depth unless specified otherwise.
OR-MM6CBL10
Mighty Mo Channel
Bend Limiters
PART NO.
DESCRIPTION
OR-MM6CBL06
For use with Mighty Mo racks
with 6.5˝ channels
OR-MM6CBL10
For use with Mighty Mo racks
with 10.5˝ channels
OR-MM6CBL16
For use with Mighty Mo racks
with 16.25˝ channels
Mighty Mo PDU
Mounting Bracket Kit
PART NO.
DESCRIPTION
OR-MMPDUMBT
Mighty Mo PDU Mounting
Bracket Kit
Mighty Mo Vertical
Management Bracket Kit
PART NO.
DESCRIPTION
Vertical management bracket kit
includes 4 brackets and all the
hardware needed to mount 2
Mighty Mo 6 vertical managers
to a standard EIA rack. Black.
OR-60400687
Kit consists of 4 brackets,
8 panel mounting screws and
4 cage mounting screws
Mighty Mo Cable
Runway Mounting
Brackets
PART NO.
DESCRIPTION
OR-MM6CRB06
For rack with 6.5˝ channel depth
OR-MM6CRB10
For rack with 10.5˝ channel depth
OR-MM6CRB16
For rack with 16.25˝ channel depth
OR-MM10CRBSVR
For MM10 server rack
OR-MM10CRBRSVR
For rear of MM10 server rack
PART NO.
DESCRIPTION
OR-MM6BDC06
For 6.5˝ channel standard rack
OR-MM6BDC10
For 10.5˝ channel standard rack
OR-MM6BDC16
For 16.25˝ channel standard rack
Mighty Mo channel bend limiters
clip onto the top edge of Mighty Mo
channels providing the proper bend
radius for cables entering the
channel. Set of 2. Black.
OR-MMPDUMBT
Enables the mounting of toolless
(button mount) PDUs to the side
of a Mighty Mo rack.
OR-60400687
OR-MM6CRB06
OR-MM6CRB16
OR-MM6BDC10
OR-MM6CRB10
OR-MM10CRBSVR
OR-MM6BDC16
Mounts to top of either the
Mighty Mo 6 or Mighty Mo 10 racks.
Provides a mounting location for
6˝–18˝ ladder racking.
Mighty Mo Rack
Base Dust Cover
Prevents dust and debris from
accumulating in rack base. Scored
for bending to clear cables from
floor up to channel. Black.
85
MIGHTY MO® CABLE MANAGEMENT SYSTEM
Mighty Mo Rack Accessories
OR-MM6CEK10
Mighty Mo Runway
Ceiling Extension Kit
Mounts on the top of Mighty Mo 6
racks. The kit extends one channel
24˝ and is supplied with a cover to
hide the cables. Black.
PART NO.
DESCRIPTION
OR-MM6CEK06
For rack with 6.5˝ channel depth, one
per kit with cover
OR-MM6CEK10
For rack with 10.5˝ channel depth,
one per kit with cover
OR-MM6CEK16
For rack with 16.25˝ channel depth, one
per kit with cover
NOTE: Extension uses rack hardware for mounting.
OR-MM6EP710OR-MM6EP706
Mighty Mo End Panel
The end panel is used to finish the
end of a row of Mighty Mo racks. It
mounts flush and provides a surface
for the vertical cable management
channel while concealing cables in
the rack channel. Black.
Standard
For use with 6˝ Mighty Mo 6 vertical cable managers
PART NO.
DESCRIPTION
OR-MM6EP706
For 7´ rack with 6.5˝ channel depth
OR-MM6EP710
For 7´ rack with 10.5˝ channel depth
OR-MM6EP716
For 7´ rack with 16.25˝ channel depth
OR-MM6EP810
For 8´ rack with 10.5˝ channel depth
OR-MM6EP816
For 8´ rack with 16.25˝ channel depth
NOTE: Includes mounting hardware .
Narrow
For use with 4˝ Mighty Mo 6 vertical cable managers*
PART NO.
DESCRIPTION
OR-MM6EPN706
For 7´ rack with 6.5˝ channel
OR-MM6EPN710
For 7´ rack with 10.5˝ channel
OR-MM6EPN716
For 7´ rack with 16.25˝ channel
OR-MM10EPN730
For 7´ Mighty Mo 10 Server
rack rails set at 30˝
OR-MM6EPN810
For 8´ rack with 10.5˝ channel
OR-MM6EPN816
For 8´ rack with 16.25˝ channel
NOTE: Includes mounting hardware.
*To use the narrow end panels with 10˝ or 12˝ vertical managers,
the OR-MM10EPS end support bracket kit must be installed.
OR-MM6CT4RUK
Mighty Mo 6 Cable Trough
For supporting fiber cables at the
bottom of Mighty Mo racks. The kit
includes an extension that bridges
the space between racks. Black
PART NO.
DESCRIPTION
OR-MM10EPS
End panel support bracket kit
PART NO.
DESCRIPTION
OR-MM6CT4RU
Cable trough, 4 rack unit
OR-MM6CT4RUK
Cable trough kit, 4 rack unit
NOTE : Includes mounting hardware.
OR-MMIPK
Mighty Mo Isolation
Pad Kit
Isolates Mighty Mo racks from
concrete floors for effective
bonding & grounding.
86
PART NO.
DESCRIPTION
OR-MMIPK
Isolation pad kit for Mighty Mo racks
MIGHTY MO® CABLE MANAGEMENT SYSTEM
Mighty Mo Horizontal Management
NOTE: Product dimensions are listed by width, height and depth unless specified otherwise.
Ortronics Mighty Mo cable management panels are optimized to organize patch cords vertically and horizontally on Mighty Mo
racks. They will also mount on any standard 19 ˝ rack. The finger design encourages defined and traceable routing of individual
patch cords.
®
Mighty Mo 6 Horizontal Management Panels
OR-MM6HMF1RU
OR-MM6HMF4RU
OR-MM6HM62RU
OR-MM6HMF2RU
OR-MM6HM61RU
OR-MM6HM81RU
PART NO.
DESCRIPTION
OR-MM6HMF1RU
Multiple fingers, cover, one rack
unit (1.75˝ x 19˝), Black
OR-MM6HMF2RU
Multiple fingers, cover, two rack
units (3.5˝ x 19˝), Black
OR-MM6HMF4RU
Multiple fingers, cover, four rack
units (7.0˝ x 19˝), Black
OR-MM6HM61RU
Six-port finger spacing, cover,
one rack unit (1.75˝ x 19˝), Black
OR-MM6HM62RU
Six-port finger spacing, cover,
two rack units (3.5˝ x 19˝), Black
OR-MM6HM81RU
Eight-port finger spacing, cover,
one rack unit (1.75˝ x 19˝), Black
OR-MM6HM82RU
Eight-port finger spacing, two
rack units (3.5˝ x 19˝), Black
Six-port finger spacing, doubleOR-MM6HM6D2RU sided, two rack units (3.5˝ x 19˝),
Black (includes cover)
OR-MM6HM82RU
OR-MM6HM6D2RU
87
MIGHTY MO® CABLE MANAGEMENT SYSTEM
Equipment Shelves for Mighty Mo Racks
NOTE: Product dimensions are listed by width, height and depth unless specified otherwise.
OR-60400355
Double Equipment Shelves
for Mighty Mo Racks
Ortronics double equipment shelf supports miscellaneous
equipment, test gear, etc. The double shelves work with
Mighty Mo racks with 6.5˝ deep channels. Shelf width is
17˝. Black.
PART NO.
DESCRIPTION
OR-60400355
19˝ x 5.25˝ x 24˝, 150 lbs capacity
OR-60400517
23˝ x 5.25˝ x 24˝, 150 lbs capacity
OR-60400655
19˝ x 5.25˝ x 24˝, 150 lbs capacity
NOTE: Shelf is slotted to accept the Ortronics monitor strap kit
OR-70700126. Includes #12-24 mounting hardware.
OR-60400517
Double Equipment Shelves
for Mighty Mo Racks
Ortronics double equipment shelf supports miscellaneous
equipment or test gear. The double shelf works with
Mighty Mo racks with 6.5˝ deep channels when assembled
in a 23˝ configuration. Shelf width is 21.37˝. Black.
OR-60400655
Double Equipment Shelves
for Mighty Mo Racks
Ortronics extra width double equipment shelf is 18.75˝
wide in front and back; usable width between mounting
flanges is 17.5˝. This shelf works with Mighty Mo racks
with 6.5˝ deep channels. Black.
OR-604045681
Four Point Equipment Shelf for
Mighty Mo Racks and Cabinets
Ortronics four point equipment shelf supports
miscellaneous equipment or test gear. The one unit
shelf works with Mighty Mo racks with all depth
channels and Mighty Mo cabinets 24˝ and deeper.
Shelf is 17.25˝ wide. Black.
OR-60400538
Mighty Mo Server Rack
Equipment Shelf
The Mighty Mo server rack equipment shelf has a fixed
front flange with an infinitely adjustable rear flange that
allows for secure four point mounting as deep as 30˝.
Shelf width is 17.25˝. Black.
OR-70700126
Mighty Mo Monitor Strap Kit
The monitor strap kit consists of hook and loop straps
which can secure a monitor with a base of any size
or shape to all equipment shelves on this page.
The monitor screen remains fully adjustable. Black.
88
PART NO.
DESCRIPTION
OR-604045681
19˝ x 1.72˝ x 20˝, 100 lbs capacity
NOTE: Shelf is slotted to accept the Ortronics monitor strap kit
OR-70700126. Includes #12-24 mounting hardware.
PART NO.
DESCRIPTION
OR-60400538
19˝ x 1.7˝ x 30˝, 200 lbs capacity
NOTE: Shelf is slotted to accept the Ortronics monitor strap kit
OR-70700126. Includes #12-24 mounting hardware.
PART NO.
DESCRIPTION
OR-70700126
Hook and loop type strap kit
MIGHTY MO® CABLE MANAGEMENT SYSTEM
Mighty Mo Overhead Cable Pathway Rack
NOTE: Product dimensions are listed by width, height and depth unless specified otherwise.
Mighty Mo overhead cable pathway racks provide cable management and an innovative mounting method for 19 ˝ rack mount
copper and fiber panels and fiber cabinets. The pathway racks allow horizontal connectivity to be supported by the overhead
pathway freeing up valuable rack or cabinet space below.
OR-60401001
Mighty Mo Overhead
Cable Pathway Rack
The Mighty Mo overhead cable
pathway racks come with everything
needed to mount the bracket to the
side of Homaco runway with 1-1/2˝
stringers or any Cablofil cable tray 2˝
or deeper. Black.
PART NO.
DESCRIPTION
OR-60401001
2 rack units, 23.6˝ W x 7.4˝ H x 9˝ D, 90
lbs. capacity
OR-60401015
5 rack units, 23.6˝ W x 12.6˝ H x 9˝ D, 90
lbs. capacity
OR-60401089
8 rack units,23.6˝ W x 18.1˝ H x 9˝ D,
90 lbs. capacity
MIGHTY MO CABLE MANAGEMENT
SYSTEM Mighty Mo Telecom Enclosure
The Mighty Mo telecom enclosure combines advanced cable management with security
and flexibility to change the way you bring high performance to the desktop. Based on the
foundation of Mighty Mo technology, the telecom enclosure provides capacity for both active and passive equipment and can support up to 48 users.
OR-MMTECSG22
OR-MMTECFCBP
Mighty Mo Ceiling Mount
Telecom Enclosure
The Mighty Mo ceiling mount telecom
enclosure has a unique patent pending
swing gate design that allows for easy
access to patching and equipment by
simply opening the front cover. The
swing-out access supports easy
re-termination and includes dampening
cylinders to control the speed of opening.
The attractive exterior blends well with
office decor and a lockable front door
provides security and protection in public
areas. Built-in cable management
supports and organizes cables, ensuring
proper bend radius. Approved to UL-2043
for use in air handling spaces.
PART NO.
OR-MMTECSG22
DESCRIPTION
Mighty Mo telecom enclosure,
ceiling mount, 23.50˝ W x 23.50˝
H x 20.61˝ D, 10 rack units, 80 lbs.
capacity, Beige.
PART NO.
DESCRIPTION
OR-MMTECFCBP
Plate Kit - includes Fan Plate with
100 CFM fan, guard, 3 ft. cord with
plug, Cable Brush Plate, and mounting hardware, Black.
OR-MMTECFSP
Fire Stop Cable Plate Kit includes
intumescent foam and mounting
hardware. Set of 2, Beige.
PART NO.
DESCRIPTION
OR-MMTEHMR2RU
Cable management panel for the
Mighty Mo telecom enclosure,
19.00˝ W x 3.47˝ H x 6.75˝ D,
2 rack units.
OR-MMTECFSP
OR-MMTEHMR2RU
Cable Management Panel
Double-sided cable management panel
with front rings to manage patch cords
and a rear trough with slots to protect
and route terminated cables.
89
STANDARD EIA RACK
NOTE: Product dimensions are listed by width, height and depth unless specified otherwise.
Ortronics® 19 ˝ self supporting EIA rack is used for mounting a variety of telecommunications and data equipment. It consists
of two U-channel type uprights 7’ high, two base and two top support angle cross members, and is constructed of aluminum.
OR-604004600*
Self Supporting
EIA Racks
Ortronics standard EIA self supporting
rack with Mighty Mo universal pattern
uprights, extruded base angles and
top angles. Tapped EIA pattern front
and rear and supplied with 50 #12-24
pilot point mounting screws. Top
flange is pre-punched to accept
6˝-18˝ ladder racking. Assembly
required. Black.
OR-DVMS706
Standard Vertical Cable
Management Cage
with Cover
Mounts to the side of a standard
EIA rack. The fingers are spaced
to line up with rack units, promoting
efficient routing of patch cords
to patch panels and equipment
from the vertical manager. Dual
snap on hinged covers allow easy
access during moves, add, and
changes. Available in single-sided
and double-sided versions.
NOTE: Includes all hardware necessary to
mount to the side of a standard EIA rack.
90
PART NO.
DESCRIPTION
OR-604004600*
19 ˝ W x 7´ H, 44 rack units
* OR-604004600 standard rack is UL listed.
NOTE: Ortronics standard EIA rack is pre-drilled to accept
side mounting of all Mighty Mo vertical managers.
®
Single-sided
PART NO.
DESCRIPTION
OR-SVMS704
3.75˝ x 6.58˝ x 7´, single-sided
OR-SVMS706
6.00˝ x 6.58˝ x 7´, single-sided
OR-SVMS804
3.75˝ x 6.58˝ x 8´, single-sided
OR-SVMS806
6.00˝ x 6.58˝ x 8´, single-sided
Double-sided
PART NO.
DESCRIPTION
OR-DVMS704
3.75˝ x 13.17˝ x 7´, double-sided
OR-DVMS706
6.00˝ x 13.17˝ x 7´, double-sided
OR-DVMS804
3.75˝ x 13.17˝ x 8´, double-sided
OR-DVMS806
6.00˝ x 13.17˝ x 8´, double-sided
STANDARD EIA FLOOR & WALL MOUNT RACKING SYSTEMS
2-Post Racks & Accesories
NOTE: Product dimensions are listed by width, height and depth unless specified otherwise.
OR-19-72-T2SD
Standard Equipment
Racks
The Homaco computer-guided
manufacturing process assures that
each rack meets exact dimensions,
guaranteeing a self-squaring
assembly. Made of top quality
6061-T6 structural grade aluminum.
Ortronics equipment racks provide
strength and stability for years. Racks
ship unassembled for efficient delivery
and storage.
Features
Self-squaring and self-supporting
Tapped uprights so no nuts are
required for assembly.
Top angels, patented self-support
base are standard.
Assembly hardware included.
19” Rack – 3” Channel
PART NO.
DESCRIPTION
OR-19-72-T2SD
72.00” H X 20.19” W X 15.00” D,
rack spaces: 38, channel width: 3,
load rating: 750 lbs.
OR-19-84-T2SD
84.00” H X 20.19” W X 15.00” D,
rack spaces: 45, channel width: 3,
load rating: 750 lbs.
OR-19-96-T2SD
96.00” H X 20.19” W X 15.00” D,
rack spaces: 51, channel width: 3,
load rating: 750 lbs.
Aluminum finish. Add “B” to part number for black finish.
19” Rack – 6” Channel
PART NO.
DESCRIPTION
OR-19-84-6T2SDB
84.00” H X 20.19” W X 18.00” D,
rack spaces: 45, channel width: 6,
load rating: 750 lbs.
Black finish.
23” Rack – 3” Channel
PART NO.
DESCRIPTION
OR-23-72-T2SD
72.00” H X 24.19” W X 15.00” D,
rack spaces: 38, channel width: 3,
load rating: 750 lbs.
Constructed of 6061-T6 structuralgrade aluminum.
OR-23-84-T2SD
84.00” H X 24.19” W X 15.00” D,
rack spaces: 45, channel width: 3,
load rating: 750 lbs.
3”x1 ¼” channel uprights.
OR-23-96-T2SD
96.00” H X 24.19” W X 15.00” D,
rack spaces: 51, channel width: 3,
load rating: 750 lbs.
Mounting holes are roll formed for
work hardened thread system.
Includes 12-24 cross-recessed
black panel mounting screws.
Specifications
5/8”, ½” universal mounting hole
pattern.
Equipped with ½” junctioning holes
for securing multiple-rack lineups.
Meets EIA-310 standards.
Aluminum finish. Add “B” to part number for black finish.
23” Rack – 6” Channel
PART NO.
DESCRIPTION
OR-23-84-6T2SDB
84.00” H X 24.19” W X 18.00” D,
rack spaces: 45, channel width: 6,
load rating: 750 lbs.
Listed to the UL 1863 Standard for
Communication Circuit Accesories.
91
EUROLINE CABINETS
Server Cabinets
NOTE: Product dimensions are listed by width, height and depth unless specified otherwise.
The Ortronics® EuroLine cabinets are designed to fit
your environment. EuroLine cabinets provide a secure
housing for your network and are made with a sturdy
steel construction for a high load carrying capacity.
Heights range from
16U–47U, widths range from 600–800mm, and depths
range from 600–1000mm.
Features
n19 ˝ mounting angles 4ea. = (front/2 ea and back/2
ea) allow for flexible configuration and adjustable
depth
n 4 way access to equipment
nQuick release/lockable, removable side doors c/
with slam latches and locks
n Powder coat paint finish RAL 9005
n Leveling feet is included as a standard feature
nSecure, locking front and back doors with spring
loaded hinges offer best accessibility even when
connecting the cabinets
n Vented top panel
nGenerous cable access
nEasy mounting, fast assembly
n Grounding kit for door connections are given as standard
nRigid welded frame construction. Corner of bases have
welded sockets on each corner that tightly fixed into the
columns five maximum stability
nReversible doors: the door hinge is easily swapped from
one side to the other
PART NO.
DESCRIPTION
OR-EUCN22U66
22U 19 ˝ 600x600mm Free Standing
Cabinet RAL 9005 Black MOUNTED
These cabinets are manufactured
in Europe, for the EMEA market.
OR-EUCN26U66
26U 19 ˝ 600x600mm Free Standing
Cabinet RAL 9005 Black MOUNTED
They are all preconfigured cabinets,
with only some door options
as indicated.
OR-EUCN32U66
32U 19 ˝ 600x600mm Free Standing
Cabinet RAL 9005 Black MOUNTED
OR-EUCN36U66
36U 19 ˝ 600x600mm Free Standing
Cabinet RAL 9005 Black MOUNTED
OR-EUCN42U66
42U 19 ˝ 600x600mm Free Standing
Cabinet RAL 9005 Black MOUNTED
OR-EUCN47U66
47U 19 ˝ 600x600mm Free Standing
Cabinet RAL 9005 Black MOUNTED
OR-EUCN22U68
22U 19 ˝ 600x800mm Free Standing
Cabinet RAL 9005 Black MOUNTED
OR-EUCN26U68
26U 19 ˝ 600x800mm Free Standing
Cabinet RAL 9005 Black MOUNTED
OR-EUCN32U68
32U 19 ˝ 600x800mm Free Standing
Cabinet RAL 9005 Black MOUNTED
OR-EUCN36U68
36U 19 ˝ 600x800mm Free Standing
Cabinet RAL 9005 Black MOUNTED
OR-EUCN42U68
42U 19 ˝ 600x800mm Free Standing
Cabinet RAL 9005 Black MOUNTED
OR-EUCN47U68
47U 19 ˝ 600x800mm Free Standing
Cabinet RAL 9005 Black MOUNTED
OR-EUCN32U88
32U 19 ˝ 800x800mm Free Standing
Cabinet RAL 9005 Black MOUNTED
OR-EUCN36U88
36U 19 ˝ 800x800mm Free Standing
Cabinet RAL 9005 Black MOUNTED
OR-EUCN42U88
42U 19 ˝ 800x800mm Free Standing
Cabinet RAL 9005 Black MOUNTED
OR-EUCN47U88
47U 19 ˝ 800x800mm Free Standing
Cabinet RAL 9005 Black MOUNTED
19˝ Free Standing
Network Cabinets
n
n
n
n
n
92
Front door features a full length
smoked and shatterproof glass
door (t=4mm) reinforced with
decorative metal frame
Turning lever lock and single
point locking mechanism
Frames are made with 24 fold
design for increased stability
Rubber edge sliding cover
mechanism protects cables
both on roof and bottom frames
Lockable, removable solid rear
door with single point barrel
locking mechanism
EUROLINE CABINETS
NOTE: Product dimensions are listed by width, height and depth unless specified otherwise.
19˝ Free Standing
Server Cabinets
n
n
n
n
n
n
Front door features a full length 63% vented
split-double opening monoblock front door
Turning lever lock and three point locking
mechanism in front door
Frames are made with 36 fold design for
increased stability with 6ea. main uprights
Multiple cable entry points provide
maximum versatility
Rubber edge sliding cover mechanism protects
cables both on roof and bottom frames
Split rear door - double opening,full length 63%
vented, lockable, removable, with three point
locking mechanism with a turning lever lock
PART NO.
DESCRIPTION
OR-EUCS26U610
26U 19 ˝ 600x1000mm
RAL 9005 Black MOUNTED
OR-EUCS36U610
36U 19 ˝ 600x1000mm
RAL 9005 Black MOUNTED
OR-EUCS42U610
42U 19 ˝ 600x1000mm
RAL 9005 Black MOUNTED
OR-EUCS47U610
47U 19 ˝ 600x1000mm
RAL 9005 Black MOUNTED
OR-EUCS42U810
42U 19 ˝ 800x1000mm
RAL 9005 Black MOUNTED
OR-EUCS47U810
47U 19 ˝ 800x1000mm
RAL 9005 Black MOUNTED
EUROLINE CABINETS
Wall Mount Cabinets
19˝ Wall Mounting Cabinets
19˝ wall mounting cabinets provide an economic solution for
cabling installations. This series of wall mount cabinets is used
in offices where a reduced amount of U height is required. The
esthetics create a pleasing and professional look.
n
n
n
n
n
n
n
n
n
n
n
n
n
Front door features a full length smoked and shatterproof
glass door (t=4mm) reinforced with decorative metal frame
19˝ mounting angles 2ea. in front and adjustable in depth
Generous cable access; multiple cable entry points provide
maximum versatility; rubber edge sliding cover mechanism
protects cables either on roof or bottom cases where cable
enters, the reverse side is being closed by dummy PVC plate
3 way access to equipment
Powder coat paint finish RAL 9005
Front door and side panels with Master lock key
Vented top panel for passive ventilation; Fan Modules units
can be installed for forced ventilation
Opening in 180° front door
Rear panel can be used as mounting plate
Grounding cable kit for door connections are given
as standard
Powder coat paint finish RAL 9005
Sturdy steel construction
Easy mounting, fast assembly
PART NO.
DESCRIPTION
OR-EUCWF7U45
7U 19˝ 600x470mm, RAL 9005 Black,
opening side panels
OR-EUCWF9U45
9U 19˝ 600x470mm, RAL 9005 Black,
opening side panels
OR-EUCWF12U45
12U 19˝ 600x470mm, RAL 9005 Black,
opening side panels
OR-EUCWF16U45
16U 19˝ 600x470mm, RAL 9005 Black,
opening side panels
OR-EUCWF20U45
20U 19˝ 600x470mm, RAL 9005 Black,
opening side panels
OR-EUCWF7U56
7U 19˝ 600x580mm, RAL 9005 Black,
opening side panels
OR-EUCWF9U56
9U 19˝ 600x580mm, RAL 9005 Black,
opening side panels
OR-EUCWF12U56
12U 19˝ 600x580mm, RAL 9005 Black,
opening side panels
OR-EUCWF16U56
16U 19˝ 600x580mm, RAL 9005 Black,
opening side panels
OR-EUCWF20U56
20U 19˝ 600x580mm, RAL 9005 Black,
opening side panels
OR-EUCWPF7U61
7U 19 ˝ 600x(470+160) mm double section cabinet, RAL
9005 Black, opening side panels, load
capacity 100kgs
OR-EUCWPF9U61
9U 19˝ 600x(470+160) mm double section cabinet, RAL
9005 Black, opening side panels, load
capacity 100kgs
OR-EUCWPF12U61
12U 19 ˝ 600x(470+160) mm double section
cabinet, RAL 9005 Black, opening side panels,
load capacity 100kgs
OR-EUCWPF16U61
16U 19 ˝ 600x(470+160) mm double section
cabinet, RAL 9005 Black, opening side panels,
load capacity 100kgs
93
EUROLINE CABINETS
Accessories
NOTE: Product dimensions are listed by width, height and depth unless specified otherwise.
Shelves
OR-EUCSHELFRM25
PART NO.
DESCRIPTION
OR-EUCSHELFFSB35
Fixed shelf 19 ˝ front: 1U - 1U adjustable sliding
bracket at back depth = 350mm. RAL 9005
BLACK
OR-EUCSHELFFSB45
Fixed shelf 19 ˝ front: 1U - 1U adjustable sliding
bracket at back depth = 450mm. RAL 9005
BLACK
OR-EUCSHELFFSB55
Fixed shelf 19 ˝ front: 2U - 1U adjustable sliding
bracket at back depth = 550mm. RAL 9005
BLACK
OR-EUCSHELFFSB65
Fixed shelf 19 ˝ front: 2U - 1U adjustable sliding
bracket at back depth = 650mm. RAL 9005
BLACK
OR-EUCSHELFF60
Fixed shelf suitable for cabinets depth=600mm.
RAL 9005 BLACK slotted
OR-EUCSHELFF80
Fixed shelf suitable for cabinets
depth = 800mm. RAL 9005 BLACK slotted
OR-EUCSHELFF10
Fixed shelf suitable for server cabinets
depth = 1000mm. RAL 9005 BLACK
OR-EUCSHELFRM25
19 ˝ 1U fixed - cantilever shelf depth = 250mm.
RAL 9005 BLACK slotted
OR-EUCSHELFRM30
19 ˝ 1U fixed - cantilever shelf depth = 300mm.
RAL 9005 BLACK slotted
OR-EUCSHELFRM35
19 ˝ 2U fixed - cantilever shelf depth = 350mm.
RAL 9005 BLACK slotted
OR-EUCSHELFS60
Sliding shelf suitable for cabinets
depth=600mm. RAL 9005 BLACK slotted
OR-EUCSHELFS80
Sliding shelf suitable for cabinets
depth = 800mm. RAL 9005 BLACK slotted
OR-EUCSHELFS10
Sliding shelf suitable for server cabinets
depth = 1000mm. RAL 9005 BLACK slotted with
rear cable management system
OR-EUCSHELFS10
OR-EUCSHELFS60
94
EUROLINE CABINETS
Accessories
NOTE: Product dimensions are listed by width, height and depth unless specified otherwise.
OR-EUCCMP1U
OR-EUCSFANT4
Cable Management
Fans
PART NO.
DESCRIPTION
OR-EUCCMP1U
Cable management panel 19 ˝ 1U
5 rings RAL 9005 BLACK
OR-EUCCMPCH1U
Cable management panel 19 ˝ 1U
trunking with cover RAL 9005 BLACK
OR-EUCCMR
45x60 cable management ring
RAL 9005 BLACK 1 Set = 5pcs
OR-EUCNVML32U
32U vertical cable management panel
for 32U 80x80 cabinets
OR-EUCNVML36U
36U vertical cable management panel
for 36U 80x80 cabinets
OR-EUCSVML42U
42U vertical cable management panel
for 42U 80x80 cabinets
OR-EUCNVML47U
47U vertical cable management panel
for 47U 80x80 cabinets
OR-EUCSVML42U
42U vertical cable management panel
for 42U 80x100 server cabinets
OR-EUCSVML47U
47U vertical cable management panel
for 42U 80x100 server cabinets
PART NO.
DESCRIPTION
OR-EUCNFANT2
Cooling unit with 2 fans for free
standing cabinets 220V RAL 9005
BLACK incl Thermostat
OR-EUCNFANT4
Cooling unit with 4 fans for free
standing cabinets 220V RAL 9005
BLACK incl Thermostat
OR-EUCWFANT1
Cooling unit with 1 fan for wall
mounting cabinets 220V RAL 9005
BLACK incl Thermostat
OR-EUCWFANT2
Cooling unit with 2 fan for wall
mounting cabinets 220V RAL 9005
BLACK incl Thermostat
OR-EUCRMFANT1U2
19 ˝ 1U cooling unit with 2 fans 220V
RAL 9005 BLACK incl Thermostat
OR-EUCRMFANT1U4
19 ˝ 1U cooling unit with 4 fans 220V
RAL 9005 BLACK incl Thermostat
OR-EUCSFANT4
Cooling unit with 4 fans for free
standing server cabinets 220V
RAL 9005 BLACK incl Thermostat
OR-EUCSFANT6
Cooling unit with 6 fans for free
standing server cabinets 220V
RAL 9005 BLACK incl Thermostat
95
EUROLINE CABINETS
Accessories
NOTE: Product dimensions are listed by width, height and depth unless specified otherwise.
OR-EUCLIGHT
OR-EUCWCAS
OR-EUCNDRAW3U
OR-EUCGKECB
96
PART NO.
DESCRIPTION
OR-EUCSSR60
L support slide rail enclosure depth = 600mm.
Zinc plated
OR-EUCSSR80
L support slide rail enclosure depth = 800mm.
Zinc plated
OR-EUCSSR10
L support slide rail enclosure depth = 1000mm.
Zinc plated
OR-EUCNDRAW3U
19˝ 3U drawer RAL 9005 BLACK
OR-EUCNKDRAW1U
19˝ 1U keyboard drawer RAL 9005 BLACK
OR-EUCPS6S
19 ˝ Power strip 6 way with miniature circuit
breaker schuko type Aluminium Profile
OR-EUCNCAS
Castor group for free standing cabinets
OR-EUCWCAS
Castor group for wall mount racks
(one point fixing single wheel)
OR-EUCCN20
m6 caged nut, screw and fastener
(1set = 20pcs.)
OR-EUCCN50
m6 caged nut, screw and fastener
(1set = 50pcs.)
OR-EUCLIGHT
Lighting fixture automatic 220V with door switch
OR-EUCNLIGHT
Lighting fixture manual 220V with on/off switch
OR-EUCGKECB
Grounding kit and Equalization Copper Busbar
OR-EUCBP1U
Blank panel 1U 19˝ RAL 9005 BLACK
OR-EUCBP2U
Blank panel 2U 19˝ RAL 9005 BLACK
OR-EUCBP3U
Blank panel 3U 19˝ RAL 9005 BLACK
OR-EUCBP4U
Blank panel 4U 19˝ RAL 9005 BLACK
OR-EUCBP5U
Blank panel 5U 19˝ RAL 9005 BLACK
OR-EUCBP6U
Blank panel 6U 19˝ RAL 9005 BLACK
OR-EUCBPV1U
Blank panel 1U 19˝ vented RAL 9005 BLACK
OR-EUCBPV2U
Blank panel 2U 19˝ vented RAL 9005 BLACK
OR-EUCBASE66
Plinth 600x647mm. RAL 9005 BLACK
For use with 600x600mm cabinet frame
OR-EUCBASE68
Plinth 600x827mm. RAL 9005 BLACK
For use with 600x800mm cabinet frame
OR-EUCBASE88
Plinth 780x827mm. RAL 9005 BLACK
For use with 800x800mm cabinet frame
OR-EUCBAY
Baying Kit for Server cabinets, Free standing
cabinets Unique Type RAL 9005 BLACK
MIGHTY MO® CABINETS
NOTE: Product dimensions are listed by width, height and depth unless specified otherwise.
Enhanced Cable Management with Superior Airflow
A solid foundation is critical for superior network performance in high density
applications. A poorly designed physical support system can have a devastating
®
effect on the performance of the network. Ortronics engineers have strategically
designed Mighty Mo cabinets from the ground up to protect network integrity.
Cable management is not just an add-on accessory, it is the basis for our design.
Ortronics’ full line of free standing cabinets specifically addresses the cable management needs of today’s
high performance networks by:
■■
Purposefully repositioning the caster rails out of the cable pathway
■■
Properly routing the cables to minimize bends and turns, reducing the number of failure points
■■
Effectively managing entry and exit points from within the cabinet frame
■■ Offering advanced features such as bend limiting clips that snap on the rack unit spaced fingers
where needed to protect fiber jumpers
The Mighty Mo cabinet is also ideal for maintaining cold-aisle/hot aisle airflow, whether your network equipment
is front-to-back, bottom or side venting. Mighty Mo cabinet air flow baffles provide separation of hot and cold
aisles and redirect air flow from side vented equipment so it matches the front to back airflow of servers.
Features:
■■ HEAVY DUTY CONSTRUCTION: Heavy-duty 14 ga. construction
offers improved durability over conventional 16 ga. cabinets.
Mighty Mo doors are especially designed to eliminate the irritating
flex found in less well built cabinets.
■■ CABLE MANAGEMENT: Mighty Mo vertical and horizontal managers
provide improved management for both servers and high density
switches. Available bend limiters provide standards compliant protection
for fiber and 10G copper patch cords.
■■ PASSIVE THERMAL MANAGEMENT: Mighty Mo baffles redirect the
airflow of side vented equipment from front to rear ensuring the proper
flow of air from cold aisle to hot aisle.
■■ THERMAL PROTECTION: A wide selection of top panels, fans and
doors are available to ensure adequate ventilation is provided to keep
equipment at the optimal operating conditions.
■■ SECURITY: Doors include locking handles to prevent unauthorized
access and tampering. Side panels also come equipped with locks.
■■ MOBILITY: Levelers come standard with frames. Swivel casters are
optional for added mobility.
■■ 180° DOOR SWING WITH SELF-CONTAINED HINGES: Self-contained
hinges used on our surface mount doors have no removable pins that
can be lost. These hinges eliminate aisle blockage when loading or
performing maintenance on equipment without removing the door.
FULLY CONFIGURABLE: Mighty Mo cabinets are built to your configuration
and arrive fully assembled with all components installed and accessories included,
reducing equipment deployment time and overall costs. Consult your local
representative to configure a cabinet to your unique requirements.
97
MIGHTY MO® CABINETS
Mighty Mo Pre-Configured Cabinets
NOTE: Product dimensions are listed by width, height and depth unless specified otherwise.
Ortronics has assembled some of the most popular cabinet sizes and accessories together into easy to order part numbers.
Pre-Configured
Server Cabinets
PART NO.
Side Panels Version
DESCRIPTION
Server Cabinet Sizes
■■
Frame configured with cable
opening at bottom rear
MMC422440-00005 MMC422440-00006
42RU x 24˝ wide x 42˝ deep
■■
Frame levelers
MMC422446-00002 MMC422446-00003
42RU x 24˝ wide x 48˝ deep
■■
Two pairs of RU labeled mounting
rails with 3/8˝ square holes
MMC472440-00003 MMC472440-00004
47RU x 24˝ wide x 42˝ deep
■■
Full profile mesh front door
Split flat mesh rear door
MMC472446-00001 MMC472446-00002
47RU x 24˝ wide x 48˝ deep
■■
■■
Two “L” shaped finger managers
on rear rails
MMC423240-0000G MMC423240-0000H
42RU x 32˝ wide x 42˝ deep
■■
Vertical PDU mount and lacing bar
MMC423246-00007 MMC423246-00008
42RU x 32˝ wide x 48˝ deep
■■
Divider or side panels as stated
to the right
MMC473240-00003 MMC473240-00004
47RU x 32˝ wide x 42˝ deep
■■
Solid top panel in front
MMC473246-00001 MMC473246-00002
47RU x 32˝ wide x 48˝ deep
■■
Cable entry top panel in rear
■■
Rack unit cage nuts #12-24
thread (package of 50)
■■
Two packages of 50 panel
mounting screws #12-24
(total of 100)
■■
Additional adhesive rack unit labels
(mounted inside of rear set of rails)
■■
Black powder coat paint
Pre-Configured
Network Cabinets
98
PART NO.
Divider Version
■■
Frame configured with cable
opening at bottom front
■■
Frame levelers
■■
Two pairs of RU labeled mounting
rails with #12-24 tapped holes
■■
Full profile plexiglas front door
■■
Full flat solid rear door
■■
Two “L” shaped finger managers
on front rails
■■
Right and left locking side panels
■■
Fan top panel in front
■■
Cable entry top panel in rear
■■
Package of 50 panel mounting
screws #12-24
■■
Black powder coat paint
“Divider” versions have a right side divider panel and ganging hardware (for within row).
“Side Panels” versions have a set of end panels (for stand alone or to create
ends of row).
PART NO.
DESCRIPTION
MMC422434-00004
42RU x 24˝ W x 36˝ D
MMC423234-0000A
42RU x 32˝ W x 36˝ D
MIGHTY MO® CABINETS
Mighty Mo Pre-Configured Cabinets
NOTE: Product dimensions are listed by width, height and depth unless specified otherwise.
The Mighty Mo cabinets are designed around industry leading cable management systems that provide above the
standard performance and capabilities for handling and supporting Cisco Nexus 7010 Data Center Switches.
Pre-Configured Mighty Mo Cabinets with Air Dam Kit
PART NO.
DESCRIPTION
OR-MMC423240-0001J
42RU x 32˝ wide x 42˝ deep, black
OR-MMC423246-00016
42RU x 32˝ wide x 48˝ deep, black
OR-MMC473240-0000L
47RU x 32˝ wide x 42˝ deep, black
OR-MMC473246-0000H
47RU x 32˝ wide x 48˝ deep, black
Pre-Configured Cabinets
for the Nexus 7010
■■
Frame configured with cable
opening at bottom front
■■
Frame levelers
■■
Two pairs of RU labeled mounting
rails with #12-24 tapped holes
■■
Full profile perforated front door
and split flat mesh rear door
■■
Two “L” shaped finger managers
on front rails with 12 bend limiters
■■ Mighty Mo Cabinet Air Dam Kits
for the Nexus 7010
■■
Right and left locking side panels
■■
Cable entry top panel on front and
rear with brush guards on front
■■
Package of 50 panel mounting
screws #12-24
■■
Black powder coat paint
*Right side removed to
show interior of cabinet
99
MIGHTY MO® CABINETS
Mighty Mo Cabinet Accessories
NOTE: Product dimensions are listed by width, height and depth unless specified otherwise.
OR-MMC42VPMLS,
OR-MMC42VPMLD
Vertical PDU
Mount and lacing Bars
Vertical PDU mount and lacing bars can
be used to mount PDUs or to manage
distribution cables routing from patch
panels and equipment out of the cabinet.
OR-MMC420206VCT
Vertical Cable Trays
Vertical cable trays consist of a
pre-cut section of 2˝ x 6˝ Cablofil tray
and mounting hardware designed to
mount inside the cabinet and manage
distribution cables routing from the patch
panels and equipment out of the cabinet.
It mounts to the strut inside the cabinet
and can be adjusted front to back.
®
PART NO.
DESCRIPTION
OR-MMC24VPMLS
Vertical PDU Mount and Lacing Bar
Single for 24U Frames
OR-MMC42VPMLS
Vertical PDU Mount and Lacing Bar Single
for 42U Frames
OR-MMC47VPMLS
Vertical PDU Mount and Lacing Bar Single
for 47U Frames
OR-MMC24VPMLD
Vertical PDU Mount and Lacing Bar Double
for 24U Frames
OR-MMC42VPMLD
Vertical PDU Mount and Lacing Bar Double
for 42U Frames
OR-MMC47VPMLD
Vertical PDU Mount and Lacing Bar
Double for 47U Frames
PART NO.
DESCRIPTION
OR-MMC420206VCT
Vertical Cable Tray 2˝ Wide X 6 ˝ Deep
for 42U Frames
OR-MMC470206VCT
Vertical Cable Tray 2˝ Wide X 6 ˝ Deep
for 47U Frames
Horizontal Cable Capacities for Vertical Cable Tray
100
USABLE
AREA
(SQ. IN.)
24 CNT
BUNDLE
CABLE
VERTICAL CABLE
TRAY CAPACITY
Cat 5e
Cat 6
Cat 6a
O.D. (in.)
1.125˝
1.25˝
1.625˝
PART NO.
DESCRIPTION
OR-MMC420206VCT
Vertical Cable Tray 2˝ Wide X 6˝ Deep for 42U
Frames
14
240
168
96
OR-MMC470206VCT
Vertical Cable Tray 2˝ Wide X 6˝ Deep for 47U
Frames
14
240
168
96
MIGHTY MO® CABINETS
Mighty Mo Cabinet Accessories
NOTE: Product dimensions are listed by width, height and depth unless specified otherwise.
OR-MMCCTMB12-B
Cable Tray
Mounting Brackets
Cable tray mounting brackets mount
to the top of the cabinet and utilize
the Cablofil® FAS method to attach
cable tray without additional hardware.
Cable tray mounting brackets can be
used alone or with the cable troughs.
The mounting brackets are designed
to maintain an even height when using
Mighty Mo racks and cabinets together.
The 42U cabinet frame will line up
with the 7´ rack and the 47U cabinet
frame will line up with the 8´ rack.
Cable tray mounting brackets for 42U frames
PART NO.
DESCRIPTION
OR-MMCCTMB06-B
Cable Tray Mounting Bracket with
Cablofil FAS style attachment for
6˝ wide tray, Basic Black
OR-MMCCTMB12-B
Cable Tray Mounting Bracket with
Cablofil FAS style attachment for
12˝ wide tray, Basic Black
OR-MMCCTMB18-B
Cable Tray Mounting Bracket with
Cablofil FAS style attachment for
18˝ wide tray, Basic Black
NOTE: Replace ‘B’ with ‘G’ for Cool Gray.
Cable tray mounting brackets for 47U frames
PART NO.
DESCRIPTION
OR-MMCCTMB4706-B
Cable Tray Mounting Bracket with
Cablofil FAS style attachment for
6˝ wide tray, Basic Black
OR-MMCCTMB4712-B
Cable Tray Mounting Bracket with
Cablofil FAS style attachment for
12˝ wide tray, Basic Black
OR-MMCCTMB4718-B
Cable Tray Mounting Bracket with
Cablofil FAS style attachment for
18˝ wide tray, Basic Black
NOTE: Replace ‘B’ with ‘G’ for Cool Gray.
OR-MMC2412CTCE-B
Cable Troughs
Cable troughs mount on top of the
cabinet frame and provide integrated
overhead routing for cable. They are
sized and pre-punched to interface
with 6˝, 12˝ and 18˝ Cablofil cable
tray directly, or can be used with
the cable tray mounting bracket.
PART NO.
DESCRIPTION
OR-MMC2406CTCE-B
Cable Trough, Center Exit, 6˝
Wide for 24˝ W Frames, Basic Black
OR-MMC2412CTCE-B
Cable Trough, Center Exit, 12˝
Wide for 24˝ W Frames, Basic Black
OR-MMC2418CTCE-B
Cable Trough, Center Exit, 18˝
Wide for 24˝ W Frames, Basic Black
OR-MMC3206CTCE-B
Cable Trough, Center Exit, 6˝
Wide for 32˝ W Frames, Basic Black
OR-MMC3212CTCE-B
Cable Trough, Center Exit, 12˝
Wide for 32˝ W Frames, Basic Black
OR-MMC3218CTCE-B
Cable Trough, Center Exit, 18˝
Wide for 32˝ W Frames, Basic Black
NOTE: Replace ‘B’ with ‘G’ for Cool Gray.
Cable Trough
Panel Brackets
Cable trough panel brackets mount to
the underside of the cable trough and
provide 3RU of 19 ˝ mounting space.
PART NO.
DESCRIPTION
OR-MMC243UCTPB-B
Cable Trough Panel Bracket, 3U for use
with 24˝ wide cabinets, Basic Black
OR-MMC323UCTPB-B
Cable Trough Panel Bracket, 3U for use
with 32˝ wide cabinets, Basic Black
NOTE: Replace ‘B’ with ‘G’ for Cool Gray.
101
MIGHTY MO® CABINETS
Mighty Mo Cabinet Accessories
NOTE: Product dimensions are listed by width, height and depth unless specified otherwise.
MMCCRMB12-B
Cable Runway
Mounting Brackets
Cable runway mounting brackets mount
to the top of the cabinet and provide a
surface for attaching 6˝, 12˝, 18˝ or 24˝
wide runway. The mounting brackets
are designed to maintain an even
height when using Mighty Mo racks and
cabinets together. The 42U frame will
line up with the 7´ racks and the 47U
frame will line up with the 8´ racks.
Cable runway mounting brackets for 42U frames
PART NO.
DESCRIPTION
OR-MMCCRMB06-B
Cable Runway Mounting Bracket for
6˝ wide runway, Basic Black
OR-MMCCRMB12-B
Cable Runway Mounting Bracket for
12˝ wide runway, Basic Black
OR-MMCCRMB18-B
Cable Runway Mounting Bracket for
18˝ wide runway, Basic Black
OR-MMCCRMB24-B
Cable Runway Mounting Bracket for
24˝ wide runway on 42U Frames,
Basic Black
NOTE: Replace ‘B’ with ‘G’ for Cool Gray.
Cable runway mounting brackets for 47U frames
OR-MMCMBK
Hardware
The Ortronics line of cabinet
hardware provides the products
needed to complete your installation.
Rack Unit Cage Nuts enable easy
and quick installation of three cage
nuts simultaneously.
®
OR-RU-1224CN
OR-MMCUN-1420-10
PART NO.
DESCRIPTION
OR-MMCCRMB4706-B
Cable Runway Mounting Bracket for
6˝ wide runway, Basic Black
OR-MMCCTMB4712-B
Cable Runway Mounting Bracket
for 12˝ wide runway, Basic Black
OR-MMCCTMB4718-B
Cable Runway Mounting Bracket
for 18˝ wide runway, Basic Black
OR-MMCCTMB4724-B
Cable Runway Mounting Bracket
for 24˝ wide runway, Basic Black
PART NO.
DESCRIPTION
OR-60400533
Panel Mounting Screw, #12-24 x
.625˝, package of 50, Basic Black
OR-PS-M6X1-50
Panel Mounting Screw, M6X1 x
.625˝ long, package of 50, Clear
OR-RU-1224CN
Rack Unit Cage Nuts, #12-24
thread, package of 50, Clear
OR-RU-M6X1CN
Rack Unit Cage Nuts, M6X1
thread, package of 50, Clear
OR-PS-1224CN
Single Hole Cage Nuts, #12-24
thread, package of 50, Clear
OR-PS-M6X1CN
Single Hole Cage Nuts, M6X1
thread, package of 50, Clear
OR-MMCCNTOOL
Cage Nut Installation Tool
OR-MMCMBK
ORMMCUN-1420-10
102
Multi-Bay Hardware Kit,
6 each 1/4-20 bolts and nuts
Unistrut® Hardware Kit, 10 each
1/4-20 bolts and Unistrut nuts
OR-MMCRULBL-60-A
Adhesive Rack Unit Label,
60RU length
OR-MM6BLC
Mighty Mo Bend Limiting Clip,
3.25˝ long, snaps onto fingers
MIGHTY MO® CABINETS
Mighty Mo Cabinet Accessories
NOTE: Product dimensions are listed by width, height and depth unless specified otherwise.
OR-MMCLVL-IP
Levelers/Isolation
Levelers come standard with the cabinet
frame; however, additional parts may be
ordered. Isolation bushings are used to
isolate the anchoring hardware from the
frame of the cabinet.
OR-MMCDR2-1915
Shelves & Drawers
Ortronics offers a full range of sturdy
equipment shelves and drawers to
protect and support valuable
equipment. Mounting hardware is
included. Basic black
PART NO.
OR-MMCLVL-IP
OR-MMCISOB-38
Isolation Bushing for 1/2˝ Hardware,
Quantity: 4
PART NO.
DESCRIPTION
OR-MMCCSS1-1912
Cantilevered Shelf, 1U, Solid, Steel,
19 ˝ x 12˝ D
OR-MMCCSS2-1915
Cantilevered Shelf, 2U, Solid, Steel,
19 ˝ x 15˝ D
OR-MMCCSS3-1915
Cantilevered Shelf, 3U, Solid, Steel,
19 ˝ x 15˝ D
OR-MMCCSV1-1912
Cantilevered Shelf, 1U, Vented, Steel,
19 ˝ x 12˝ D
OR-MMCCSV2-1915
Cantilevered Shelf, 2U, Vented, Steel,
19 ˝ x 15˝ D
OR-MMCCSV3-1915
Cantilevered Shelf, 3U, Vented, Steel,
19 ˝ x 15˝ D
OR-MMCFSV-1926
19 ˝ x 26˝ Deep, 4-point rackmount
vented fixed shelf
OR-MMCSSVL-1924
Sliding Shelf, 19 ˝ EIA, 24˝ D Vented,
4 Point, 100lb load rated
OR-MMCSSVH-1930
Filler Panels
Improve network performance with
improved separation of the hot and
cold aisle utilizing filler panels to
control airflow.
OR-MMCFANP19-4-2
Fan Panels
Use the 19 ˝ rack mount fan panel
to eliminate hot spots.
Levelers, 1/2-13 thread with Isolation
Pads, Quantity: 4
Isolation Bushing for 3/8˝ Hardware,
Quantity: 4
OR-MMCISOB-50
OR-MMCSSVM-1924
OR-MMCFPS-2-B
DESCRIPTION
Sliding Shelf, 19 ˝ EIA, 24˝ D Vented,
4 Point, 150lb load rated
Sliding Shelf, 19 ˝ EIA, 30˝ D Vented,
4 Point, 300lb load rated
OR-MMCDR2-1915
Drawer, 2U, 19 ˝ x 15˝ D
OR-MMCDR4-1915
Drawer, 4U, 19 ˝ x 15˝ D
PART NO.
DESCRIPTION
OR-MMCFPS-1-B
1 Rack Unit, #12-24 Mounting Hardware
OR-MMCFPS-2-B
2 Rack Unit, #12-24 Mounting Hardware
OR-MMCFPS-3-B
3 Rack Unit, #12-24 Mounting Hardware
OR-MMCFPS-4-B
4 Rack Unit, #12-24 Mounting Hardware
OR-MMCFPS-5-B
5 Rack Unit, #12-24 Mounting Hardware
OR-MMCFPS-6-B
6 Rack Unit, #12-24 Mounting Hardware
OR-MMCFPT-1-B
Tool-less for square mtg. holes, 1 Rack Unit
OR-MMCFPT-2-B
Tool-less for square mtg. holes, 2 Rack Unit
OR-MMCFPT-3-B
Tool-less for square mtg. holes, 3 Rack Unit
OR-MMCFPT-4-B
Tool-less for square mtg. holes, 4 Rack Unit
OR-MMCFPT-8-B
Tool-less for square mtg. holes, 8 Rack Unit
PART NO.
DESCRIPTION
OR-MMCFANP19-4-2
Fan Panel, 19 ˝, (2) 4˝ 110 CFM ea.,
120 Volt, 24˝ Cord
103
MIGHTY MO® CABINETS
Mighty Mo Cabinet Accessories
NOTE: Product dimensions are listed by width, height and depth unless specified otherwise.
OR-MMCAB421612
Airflow Baffles
Airflow baffles ensure the proper flow of
air from cold aisle to hot aisle, even with
side ventilated equipment. Air dam kits
prevent hot air from recirculating and
mixing with the cool air when used with
equipment that breathes front to rear.
OR-MMCFAN-6
Fans & Blowers
Replacement fans for the fan top plate.
Fans include the cord, finger guard
and mounting hardware.
104
Airflow Baffles
PART NO.
DESCRIPTION
OR-MMCAB421612
Airflow Baffle, for 32˝ wide 42RU
frame when mounting rails are set at
16-1/4˝ front to rear and “U” shape
vertical is installed
OR-MMCAB423012
Airflow Baffle, for 32˝ wide 42RU
frame when mounting rails are set at
30˝ front to rear and “U” shape
vertical is installed
OR-MMCAB471612
Airflow Baffle, for 32˝ wide 47RU
frame when mounting rails are set at
16-1/4˝ front to rear and “U” shape
vertical is installed
OR-MMCAB473012
Airflow Baffle, for 32˝ wide 47RU
frame when mounting rails are set at
30˝ front to rear and “U” shape
vertical is installed
OR-MMCAB421632SA
Airflow Baffle, for 32˝ wide 42RU
frame when mounting rails are set at
16-1/4˝ front to rear and side panels
are installed
OR-MMCAB471632SA
Airflow Baffle, for 32˝ wide 47RU
frame when mounting rails are set at
16-1/4˝ front to rear and side panels
are installed
OR-MMC4232ADK
Air Dam Kit, for 32˝ wide 42RU frame
OR-MMC4732ADK
Air Dam Kit, for 32˝ wide 47RU frame
Fans & Blowers
PART NO.
DESCRIPTION
OR-MMCFAN-6
Replacement fan for top panels, 6˝ diameter,
120 Volt, 235 CFM, 24˝ Cord, Basic Black
OR-MMCFAN-6-2
Replacement fan for top panels, 6˝ diameter,
208 Volt, 235 CFM, 24˝ Cord, Basic Black
MIGHTY MO® CABINETS
Mighty Mo Cabinet Accessories
NOTE: Product dimensions are listed by width, height and depth unless specified otherwise.
OR-MMCPB11518-01
Basic PDU
Increased processing speeds require
additional power distributed to each
cabinet. Managing the power while
minimizing the interference with the rack
equipment and airflow is critical.
The Ortronics® range includes 120V and
208V basic power distribution in 15, 20
and 30 amp sizes. Hardware is included
to mount to vertical PDU mounting bar.
PART NO.
DESCRIPTION
OR-MMCPB11510-01
Basic 17.5˝ Horizontal PDU, 120V 15A,
(10) NEMA 5-15 outlets, 5-15P input
plug w/10´ cord
OR-MMCPB11518-01
Basic 29.5˝ Vertical PDU, 120V 15A,
(18) NEMA 5-15 outlets, 5-15P input
plug w/10´ cord
OR-MMCPB11524-01
Basic 66.5˝ Vertical PDU, 120V 15A,
(24) NEMA 5-15 outlets, 5-15P input
plug w/10´ cord
OR-MMCPB12010-01
Basic 17.5˝ Horizontal PDU, 120V 20A,
(10) NEMA 5-20 outlets, L5-20P
input plug w/10´ cord
OR-MMCPB12018-01
Basic 29.5˝ Vertical PDU, 120V 20A,
(18) NEMA 5-20 outlets, L5-20P
input plug w/10´ cord
OR-MMCPB12024-01
Basic 66.5˝ Vertical PDU, 120V 20A,
(24) NEMA 5-20 outlets, L5-20P
input plug w/10´ cord
OR-MMCPB13016-01
Basic 29.5˝ Vertical PDU, 120V 30A,
(16) NEMA 5-20 outlets, L5-30P input
plug w/10´ cord
OR-MMCPB13024-01
Basic 66.5˝ Vertical PDU, 120V 30A,
(24) NEMA 5-20 outlets, L5-30P input
plug w/10´ cord
OR-MMCPB22012-01
Basic 17.5˝ Horizontal PDU, 208V 20A,
(12) IEC C13 outlets, L6-20P input plug
w/10´ cord
OR-MMCPB22018-01
Basic 29.5˝ Vertical PDU, 208V 20A,
(18) IEC C13 outlets, L6-20P input
plug w/10´ cord
OR-MMCPB22024-01
Basic 66.5˝ Vertical PDU, 208V 20A,
(24) IEC C13 outlets, L6-20P input
plug w/10´ cord
OR-MMCPB23016-01
Basic 29.5˝ Vertical PDU, 208V 30A,
(16) IEC C13 outlets, L6-30P input
plug w/10´ cord
OR-MMCPB23024-01
Basic 66.5˝ Vertical PDU, 208V 30A,
(24) IEC C13 outlets, L6-30P input
plug w/10´ cord
OR-MMCPB23024-02
Basic 66.5˝ Vertical PDU, 208V 30A,
(20) IEC (4) IEC C19 outlets, L6-30P
input plug w/10´ cord
105
MIGHTY MO® CABINETS
Mighty Mo Cabinet Accessories
NOTE: Product dimensions are listed by width, height and depth unless specified otherwise.
OR-MMCPM22018-01
Metered PDU
Increased processing speeds require
additional power distributed to each
cabinet. Monitoring and managing
the power while minimizing the
interference with the rack equipment
and airflow is critical. Ortronics® options
include 120V and 208V metered power
distribution in 20 and 30 amp sizes.
Hardware is included to mount to
vertical PDU mounting bar.
PART NO.
DESCRIPTION
OR-MMCPM12010-01
Metered 17.5˝ Horizontal PDU, 120V 20A,
(10) NEMA 5-20 outlets, L5-20P input
plug w/10´ cord
OR-MMCPM12018-01
Metered 29.5˝ Vertical PDU, 120V 20A,
(18) NEMA 5-20 outlets, L5-20P input
plug w/10´ cord
OR-MMCPM12024-01
Metered 66.5˝ Vertical PDU, 120V 20A,
(24) NEMA 5-20 outlets, L5-20P input
plug w/10´ cord
OR-MMCPM13016-01
Metered 29.5˝ Vertical PDU, 120V 30A,
(16) NEMA 5-20 outlets, L5-30P input
plug w/10´ cord
OR-MMCPM13024-01
Metered 66.5˝ Vertical PDU, 120V 30A,
(24) NEMA 5-20 outlets, L5-30P input
plug w/10´ cord
OR-MMCPM22012-01
Metered 17.5˝ Horizontal PDU, 208V 20A,
(12) IEC C13 outlets, L6-20P input
plug w/10´ cord
OR-MMCPM22018-01
OR-MMCPM22024-01
OR-MMCPM23016-01
OR-MMCPM23024-01
OR-MMCPM23024-02
106
Metered 29.5˝ Vertical PDU, 208V 20A,
(18) IEC C13 outlets, L6-20P input
plug w/10´ cord
Metered 66.5˝ Vertical PDU, 208V 20A,
(24) IEC C13 outlets, L6-20P input
plug w/10´ cord
Metered 29.5˝ Vertical PDU, 208V 30A,
(16) IEC C13 outlets, L6-30P input
plug w/10´ cord
Metered 66.5˝ Vertical PDU, 208V 30A,
(24) IEC C13 outlets, L6-30P input
plug w/10´ cord
Metered 66.5˝ Vertical PDU, 208V 30A,
(20) IEC (4) IEC C19 outlets, L6-30P
input plug w/10´ cord
MIGHTY MO® CABINETS
Mighty Mo Cabinet Accessories
NOTE: Product dimensions are listed by width, height and depth unless specified otherwise.
OR-BCGSM6X7
Air Guard® Brush
Cable Grommets
PART NO.
DESCRIPTION
OR-BCGSM6X7*
Surface mount two piece
assembly designed to retrofit
around existing cables without
the need to disconnect cables.
Covers any shape or size up to
10˝ x 10˝.
OR-BCGFM3X9
Flush mount two piece assembly
designed for new installations
in data centers to maximize
energy efficiency. Designed with a
removable back brush that allows
for great versatility when floor
tiles need to be removed.
OR-BCGFMC3X9
Cover fits over the flush mount
brush cable grommet to provide
a solid surface for increased
durability and safety when cables
are not going through the floor.
Features:
■■
Provides an exceptional seal around
cables for an effective and economical
solution towards eliminating bypass air
through cable cutouts.
■■
Provides an energy savings benefit
by reducing cool air loss while improving
the static pressure to cool data
center equipment.
OR-BCGFM3X9
■■
Helps prevent network equipment
from overheating.
■■
Seals cable openings with an
overlapping brush and/or EPDM
gaskets to help prevent under
floor contamination.
■■
Floor tiles can be removed
without disconnecting equipment.
■■
Flame retardant ABS polycarbonate
material provides a finished look.
OR-BCGFMC3X9
OR-BCGFME5X7
OR-BCGFME5X7
Flush mount Extreme is a heavy
duty unit with a two stage,
integrated sealing system, EPDM
gasket material (UL94 HF-1 rated)
and standard Air Guard brush
technology, to provide the most
effective air seal.
A heavy duty, integrated safety
cover comes as a standard
component. OSHA jobsite
statutes require open holes in
floor panels to be covered. The
cover may remain in place until
cabling systems are installed and
maybe saved for future use.
*The OR-BCGSM6X7 can mount to any standard Mighty Mo
Cabinet cable entry top panel to provide a layer of protection
from dust and debris. One two piece grommet will cover both
openings in a cable entry top panel.
107
MIGHTY MO® CABINETS
Mighty Mo Wall Mount Cabinets
NOTE: Product dimensions are listed by width, height and depth unless specified otherwise.
The Mighty Mo wall mount cabinets utilize advanced cable
management to help secure, support and organize your network
where floor space is limited.
Providing capacity for both active and passive equipment, the cabinets feature one-rack unit finger style vertical managers to ensure proper
cable management for maximum network performance. An optional rear horizontal mount bracket kit is designed to provide 2 additional fixed
rack units on the rear wall for mounting fiber, equipment or power distribution units. In addition, the cabinet center section swings out from
the wall to
provide easy access to the equipment.
The front lockable wing turn latch allows you to secure the front door without having to lock the cabinet. This feature allows for easy
access into the front of the cabinet when you are in a secure environment.
The Mighty Mo wall mount cabinets are also an ideal choice for mounting in an open office environment. The cabinet’s heavy duty
construction minimizes sagging under heavy loads and the optional 50cfm fan is 50% quieter than most other leading cabinets.
Features & Benefits
108
■■
Cable management to support and organize cables, ensuring proper cable management for minimum distortion
and maximum network performance
■■
Choice of solid or plexiglass door
■■
The cabinet can be mounted to open left or right
■■
Locking center section swings out to provide easy access to the equipment
■■
Front and center sections are keyed alike
■■
Includes one pair of fully adjustable 12-24 EIA mounting rails
■■
Brush cable entry plates standard on top rear
■■
Cable knockout plates standard on bottom rear
■■
3˝ hole with cap standard on top and bottom rear
■■
Vented sides for passive cooling of active equipment
■■
Optional 50cfm cooling fans are available to further protect active equipment
■■
Heavy duty 14 GA (.075˝) steel construction
MIGHTY MO® CABINETS
Mighty Mo Wall Mount Cabinets
NOTE: Product dimensions are listed by width, height and depth unless specified otherwise.
Mighty Mo® Wall Mount Cabinets
OR-MMW122420P-B
Mighty Mo wall mount cabinets
PART NO.
DESCRIPTION
WEIGHT
CAPACITY
OR-MMW122420S-B
12U x 24˝ W x 20˝ D, Solid door,
height is 23.50˝, Basic Black
150 lbs
OR-MMW122420P-B
12U x 24˝ W x 20˝ D, Plexiglass
door, height is 23.50˝, Basic Black
150 lbs
OR-MMW192420S-B
19U x 24˝ W x 20˝ D, Solid door,
height is 35.75˝, Basic Black
200 lbs
OR-MMW192420P-B
19U x 24˝ W x 20˝ D, Plexiglass
door, height is 35.75˝, Basic Black
200 lbs
OR-MMW262420S-B
26U x 24˝ W x 20˝ D, Solid door,
height is 48.00˝, Basic Black
300 lbs
OR-MMW262420P-B
26U x 24˝ W x 20˝ D, Plexiglass
door, height is 48.00˝, Basic Black
300 lbs
OR-MMW122426S-B
12U x 24˝ W x 26˝ D, Solid door,
height is 23.50˝, Basic Black
150 lbs
OR-MMW122426P-B
12U x 24˝ W x 26˝ D, Plexiglass
door, height is 23.50˝, Basic Black
150 lbs
OR-MMW192426S-B
19U x 24˝ W x 26˝ D,Solid door,
height is 35.75˝, Basic Black
200 lbs
OR-MMW192426P-B
19U x 24˝ W x 26˝ D, Plexiglass
door, height is 35.75˝, Basic Black
200 lbs
OR-MMW262426S-B
26U x 24˝ W x 26˝ D, Solid door,
height is 48.00˝, Basic Black
300 lbs
OR-MMW262426P-B
26U x 24˝ W x 26˝ D, Plexiglass
door, height is 48.00˝, Basic Black
300 lbs
Mighty Mo wall mount cabinet accessories
PART NO.
DESCRIPTION
OR-MMCFAN-4-50
Fan Kit, 4˝, 50cfm
OR-MMWHMBM12-B
Rear Horizontal Mount Bracket Kit
OR-MMWBPK
Brush Plate Kit
OR-MMW12M12-B
12U Mounting Rail, 12-24, 1-pair
OR-MMW19M12-B
19U Mounting Rail, 12-24, 1-pair
OR-MMW26M12-B
26U Mounting Rail, 12-24, 1-pair
109
DATACAB WALL MOUNT CABINETS
Wall Mount Cabinets & Accesories
NOTE: Product dimensions are listed by width, height and depth unless specified otherwise.
NEW
The Ortronics® DataCab wall mount cabinets are perfect for both active
equipment and passive zone cabling. The thin line front door construction offers
more room in the center section to provide easy access to the equipment.
The heavy duty construction of the cabinet minimizes sagging under heavy loads.
The hinge side placement of the rear section mounting holes provides additional
support when the center section is open for terminations.
The sides of the cabinet are vented for passive cooling of the active equipment,
and the optional 50cfm fan is 50% quieter than the fans of most other leading
cabinets.
Features & Benefits
■■
Choice of solid or Plexiglas® door
■■
Locking center section swings out to provide easy access
■■
Door and center section are keyed alike
■■
Includes one pair of fully adjustable 12-24 EIA mounting rails
■■
Heavy-duty welded steel construction
■■
Vented sides for passive cooling of active equipment
■■
Optional 50cfm cooling fans are available to further protect active equipment
Wall Mount Cabinets & Accesories
DCW122424S-B
PART NO.
DESCRIPTION
OR-DCW122424S-B
12U x 24”W x 24”D, solid door, height
is 23.50”, basic black
125 lbs
OR-DCW122424P-B
12U x 24”W x 24”D, plexiglas door,
height is 23.50”, basic black
125 lbs
OR-DCW192424S-B
19U x 24”W x 24”D, plexiglas door,
height is 35.75”, basic black
150 lbs
OR-DCW192424P-B
19U x 24”W x 24”D, plexiglas door,
height is 35.75”, basic black
150 lbs
DataCab Accesories
DataCab Wall
Mount Cabinets
The DataCab wall mount cabinet
comes standard with four removable
cable knockout panels on the rear
section. Each section contains one
knock-out that can be 1-3/8” or 2”
diameter and two knockouts that
can be 7/8” or 1-1/8” diameter.
110
PART NO.
DESCRIPTION
OR-MMCFAN-4-50
Fan kit, 4”, 50cfm with finger guard and 2’ power
cord
OR-MMWBPK
Brush Plate Kit
OR-DCW12M12-B
12U mounting rail, 12-24, one-pair
OR-DCW19M12-B
19U mounting rail, 12-24, one-pair
MIGHTY MO® AIR CONTROL
NOTE: Product dimensions are listed by width, height and depth unless specified otherwise.
NEW
Mighty Mo Air Control Solutions
To improve data center cooling efficiency it is crucial to separate and contain cold
air and provide warmer air back to the cooling units. Mighty Mo Air Control products
significantly reduce cooling requirements by creating physical separation between the
cold and hot air aisles. Mighty Mo Air Control products can be used to reduce the amount of cold air
lost through unoccupied areas of equipment in hot and cold aisle environments, as well as balance
the underfloor pressure and reduce air leakage.
MIGHTY MO AIR CONTROL
Passive Cooling Solutions
NEW
Mighty Mo Air Cap Retractable Aisle Cover
The Air Cap is a retractable cover that attaches to the top of the rack/cabinet and creates a barrier that prevents hot air
and cold air from mixing. This retractable cover is spring loaded and designed to retract into a metal case should a fire
suppression event occur. Thermal links melt at 135ºF and release the cover into the housing should temperatures go beyond
a certain level. This ensures that the sprinkler pattern is not interrupted and also prevents the fire resistant cover from being
exposed to the fire. The retractable feature also allows easy access when overhead maintenance is needed.
Mighty Mo Air Cap Retractable Aisle Cover
PART NO.
DESCRIPTION
OR-MMACAP60X30
Air Cap, 60˝ W x 30´ L
OR-MMACAP84X30
Air Cap, 84˝ W x 30´ L
Contact customer service for lengths under 30 feet.
111
MIGHTY MO® AIR CONTROL
Passive Cooling Solutions
NOTE: Product dimensions are listed by width, height and depth unless specified otherwise.
NEW
Mighty Mo Air Curtain System
The Mighty Mo Air Curtain is a containment system designed to separate hot and
cold airflow. The fire resistant vinyl hangs from aluminum tracks mounted to the drop
ceiling grid above the top of the racks/cabinets and forms a barrier between the hot
aisle and cold aisle. The aluminum tracks are connected to the ceiling grid by fusible
links that release should temperatures go beyond a certain level. This ensures that
the sprinkler pattern is not interrupted.
PART NO.
DESCRIPTION
OR-MMACNP29X12
Vinyl Panel, 29 ˝ H x 12˝ L
OR-MMACNP29X24
Vinyl Panel, 29 ˝ H x 24˝ L
OR-MMACNP29X36
Vinyl Panel, 29 ˝ H x 36˝ L
OR-MMACNP29X48
Vinyl Panel, 29 ˝ H x 48˝ L
OR-MMACNP29X60
Vinyl Panel, 29 ˝ H x 60˝ L
OR-MMACNP29X72
Vinyl Panel, 29 ˝ H x 72˝ L
OR-MMACNP56X12
Vinyl Panel, 56˝ H x 12˝ L
OR-MMACNP56X24
Vinyl Panel, 56˝ H x 24˝ L
OR-MMACNP56X36
Vinyl Panel, 56˝ H x 36˝ L
The Hanging Vinyl Panel System
is sold in kits that include all the
necessary hangers, track and panels
to cover your specific area. The vinyl
panels are the length of the aluminum
track and overlap at the track
seams. Each panel has two inches
of additional width on each end to
overlap and create one continuous
partition.
OR-MMACNP56X48
Vinyl Panel, 56˝ H x 48˝ L
OR-MMACNP56X60
Vinyl Panel, 56˝ H x 60˝ L
OR-MMACNP56X72
Vinyl Panel, 56˝ H x 72˝ L
OR-MMACNP98X12
Vinyl Panel, 98˝ H x 12˝ L
OR-MMACNP98X24
Vinyl Panel, 98˝ H x 24˝ L
OR-MMACNP98X48
Vinyl Panel, 98˝ H x 48˝ L
OR-MMACNP110X12
Vinyl Panel, 110˝ H x 12˝ L
The tracks are available in clear
anodized aluminum. To determine
the size of the Hanging Vinyl Panel
System required you will need the
following measurements:
OR-MMACNP110X24
Vinyl Panel, 110˝ H x 24˝ L
OR-MMACNP110X48
Vinyl Panel, 110˝ H x 48˝ L
OR-MMACNP122X12
Vinyl Panel, 122˝ H x 12˝ L
OR-MMACNP122X24
Vinyl Panel, 122˝ H x 24˝ L
OR-MMACNP122X48
Vinyl Panel, 122˝ H x 48˝ L
OR-MMACNP146X12
Vinyl Panel, 146˝ H x 12˝ L
OR-MMACNP146X24
Vinyl Panel, 146˝ H x 24˝ L
OR-MMACNP146X48
Vinyl Panel, 146˝ H x 48˝ L
OR-MMACNP182X12
Vinyl Panel, 182˝ H x 12˝ L
OR-MMACNP182X24
Vinyl Panel, 182˝ H x 24˝ L
OR-MMACNP182X48
Vinyl Panel, 182˝ H x 48˝ L
Hanging Vinyl Panels
Fire resistant vinyl panels hang from
aluminum tracks mounted to the
drop ceiling grid above the racks and
cabinets. This curtain forms a barrier
between the hot aisle and cold aisle.
The aluminum tracks are connected
to the ceiling grid by fusible links that
release and drop to the floor when
temperatures go above 135°F, ensuring
that the fire sprinkler pattern is not
interrupted. Normal fire suppression
systems engage at 158°F.
■■
■■
112
Linear feet – this is the length of
aluminum track needed to create
a rectangle around the aisle to be
contained. Kits are available
from 1´ to 6´ long and can be
connected to one another for
larger installations.
Drop down length (in inches) –
this is the length of the vinyl panels
from the aluminum track to the top
of the racks and cabinets or floor.
Available lengths are from 29 ˝ to
182˝ high.
MIGHTY MO® AIR CONTROL
Passive Cooling Solutions
NOTE: Product dimensions are listed by width, height and depth unless specified otherwise.
NEW
Hanging Vinyl
Corner Panels
The Hanging Vinyl Corner Panels
include a curved track, panels and all
the necessary hangers to make a 90
degree radius corner. The corner is
12 inches long in each direction.
Hanging Vinyl
Strip Doors
The Hanging Vinyl Strip Doors are
designed as an economical solution
for closing the end of an aisle. The
track sections are available in 1 foot
increments up to 6 feet. The 1 foot
wide vinyl strips have a 2 inch
overlap on each side for a total
width of 16 inches. The Hanging
Vinyl Strip Doors are sold in a
variety of sizes to fit virtually
every application.
PART NO.
DESCRIPTION
OR-MMACNCP29X12
Vinyl Corner Panel, 29 ˝ H x 12˝ L
OR-MMACNCP56X12
Vinyl Corner Panel, 56˝ H x 12˝ L
OR-MMACNCP98X12
Vinyl Corner Panel, 98˝ H x 12˝ L
OR-MMACNCP110X12
Vinyl Corner Panel, 110˝ H x 12˝ L
OR-MMACNCP122X12
Vinyl Corner Panel, 122˝ H x 12˝ L
OR-MMACNCP146X12
Vinyl Corner Panel, 146˝ H x 12˝ L
OR-MMACNCP182X12
Vinyl Corner Panel, 182˝ H x 12˝ L
PART NO.
DESCRIPTION
OR-MMACNS98X12
Vinyl Strip, 98˝ H x 12˝ L
OR-MMACNS98X24
Vinyl Strip, 98˝ H x 24˝ L
OR-MMACNS98X36
Vinyl Strip, 98˝ H x 36˝ L
OR-MMACNS98X48
Vinyl Strip, 98˝ H x 48˝ L
OR-MMACNS98X60
Vinyl Strip, 98˝ H x 60˝ L
OR-MMACNS98X72
Vinyl Strip, 98˝ H x 72˝ L
OR-MMACNS110X12
Vinyl Strip, 110˝ H x 12˝ L
OR-MMACNS110X24
Vinyl Strip, 110˝ H x 24˝ L
OR-MMACNS110X36
Vinyl Strip, 110˝ H x 36˝ L
OR-MMACNS110X48
Vinyl Strip, 110˝ H x 48˝ L
OR-MMACNS110X60
Vinyl Strip, 110˝ H x 60˝ L
OR-MMACNS110X72
Vinyl Strip, 110˝ H x 72˝ L
OR-MMACNS122X12
Vinyl Strip, 122˝ H x 12˝ L
OR-MMACNS122X24
Vinyl Strip, 122˝ H x 24˝ L
OR-MMACNS122X36
Vinyl Strip, 122˝ H x 36˝ L
OR-MMACNS122X48
Vinyl Strip, 122˝ H x 48˝ L
OR-MMACNS122X60
Vinyl Strip, 122˝ H x 60˝ L
OR-MMACNS122X72
Vinyl Strip, 122˝ H x 72˝ L
OR-MMACNS146X12
Vinyl Strip, 146˝ H x 12˝ L
OR-MMACNS146X24
Vinyl Strip, 146˝ H x 24˝ L
OR-MMACNS146X36
Vinyl Strip, 146˝ H x 36˝ L
OR-MMACNS146X48
Vinyl Strip, 146˝ H x 48˝ L
OR-MMACNS146X60
Vinyl Strip, 146˝ H x 60˝ L
OR-MMACNS146X72
Vinyl Strip, 146˝ H x 72˝ L
OR-MMACNS182X12
Vinyl Strip, 182˝ H x 12˝ L
OR-MMACNS182X24
Vinyl Strip, 182˝ H x 24˝ L
OR-MMACNS182X36
Vinyl Strip, 182˝ H x 36˝ L
OR-MMACNS182X48
Vinyl Strip, 182˝ H x 48˝ L
OR-MMACNS182X60
Vinyl Strip, 182˝ H x 60˝ L
OR-MMACNS182X72
Vinyl Strip, 182˝ H x 72˝ L
113
MIGHTY MO® AIR CONTROL
Passive Cooling Solutions
NOTE: Product dimensions are listed by width, height and depth unless specified otherwise.
NEW
Mighty Mo Sliding
Aisle End Door
The Sliding Aisle End Door installs at the
end of the row. The door frame is
constructed of extruded aluminum and
supports clear acrylic sliding doors,
bridging an aisle up to 84˝ wide. The
door is shipped fully assembled to make
installation easier. Simply tilt the door into
place, bolt it to the floor and attach the
turnbuckles on the top of the door to the
top of the end rack or cabinet. The
no-threshold design allows unfettered
access to the contained aisle. The
frames are available in clear or black
anodized aluminum.
Mighty Mo Hinged
Aisle End Door
DESCRIPTION
OR-MMADRS80X89DL
Air Door, Sliding, 80˝ H x 89 ˝ W,
dual 24˝ W doors, Clear
OR-MMADRS80X89DL-B
Air Door, Sliding, 80˝ H x 89 ˝ W,
dual 24˝ W doors, Black
PART NO.
DESCRIPTION
OR-MMADRH80X56LH
Air Door, Hinged, 80˝ H x 56˝ W,
left hand open, Clear
OR-MMADRH80X56LH-B
Air Door, Hinged, 80˝ H x 56˝ W,
left hand open, Black
OR-MMADRH80X56RH
Air Door, Hinged, 80˝ H x 56˝ W,
right hand open, Clear
OR-MMADRH80X56RH-B
Air Door, Hinged, 80˝ H x 56˝ W,
right hand open, Black
Mighty Mo Frame Panel
PART NO.
DESCRIPTION
The Frame Panel is used to create
containment when one row of racks
or cabinets is not the same length as
another row. It creates a right angle
from the aisle end door to the rack
or cabinet of the shorter row, effectively
closing the row and preventing the
mixing of hot and cold air. Each
frame support is two feet wide to
match the size of the standard floor
tiles. The frames are available in clear
or black anodized aluminum.
OR-MMADRF80X24
Air Door, Frame Support,
80˝ H x 24˝ W, Clear
OR-MMADRF80X24-B
Air Door, Frame Support,
80˝ H x 24˝ W, Black
The Hinged Aisle End Door is also
constructed of extruded aluminum and
clear acrylic and has the same ease of
installation as our sliding door.
The door can be purchased with a left
hand or right hand opening and has a
swing radius of 3 feet. The frames
are available in clear or black
anodized aluminum.
114
PART NO.
MIGHTY MO® AIR CONTROL
Passive Cooling Solutions
NOTE: Product dimensions are listed by width, height and depth unless specified otherwise.
NEW
Mighty Mo Air Booth
The Air Booth is a three sided containment
system that is placed directly over a
perforated tile, in front of a rack or cabinet.
This isolates the cold air provided from the
perforated tile, creating a dedicated supply
targeted specifically for the intake of active
equipment within individual racks or
cabinets. By providing exclusive access
to cold air, the Air Booth spot cools high
density and high powered equipment.
The Air Booth is an effective containment
system for isolated racks and cabinets.
The frames are available in clear or black
anodized aluminum.
PART NO.
DESCRIPTION
OR-MMABTH802424
Air Booth, 3 sided,
80˝ H x 24˝ W x 24˝ D, Clear
OR-MMABTH802424-B
Air Booth, 3 sided,
80˝ H x 24˝ W x 24˝ D, Black
OR-MMABTH804824
Air Booth, 3 sided,
80˝ H x 48˝ W x 24˝ D, Clear
OR-MMABTH804824-B
Air Booth, 3 sided,
80˝ H x 48˝ W x 24˝ D, Black
OR-MMABTH807224
Air Booth, 3 sided,
80˝ H x 72˝ W x 24˝ D, Clear
OR-MMABTH807224-B
Air Booth, 3 sided,
80˝ H x 72˝ W x 24˝ D, Black
115
MIGHTY MO® AIR CONTROL
Passive Cooling Solutions
NOTE: Product dimensions are listed by width, height and depth unless specified otherwise.
NEW
OR-MMADIS0624
Mighty Mo Air Disrupter
The Air Disrupter is a curtain designed
to modify the air velocity under a raised
floor. Low pressure areas above
perforated tiles are often a result of air
rushing past the tile opening at too great
a speed. By strategically placing the
Mighty Mo Air Disrupters under the raised
floor, air velocity is greatly reduced and
more air is allowed to permeate through
the tiles, ensuring a consistent supply of
cool air to each rack or cabinet.
PART NO.
DESCRIPTION
OR-MMADIS0624
Air Disrupter, 6˝ H x 24˝ W
OR-MMADIS1224
Air Disrupter, 12˝ H x 24˝ W
OR-MMADIS1824
Air Disrupter, 18˝ H x 24˝ W
OR-MMADIS2424
Air Disrupter, 24˝ H x 24˝ W
The Mighty Mo Air Disrupters are made
from the fireproof material Sandel.
PART NO.
DESCRIPTION
Air Plugs are used to fill in cable
openings in the raised floor or any
gaps where airflow needs to be
blocked. Air Plugs are soft,
compressible and safe to use
around all types of cable, including
fiber optic cable.
OR-MMAPL0404
Air Plug, 5˝ x 4˝ x 4˝, Black
OR-MMAPL0606
Air Plug, 5˝ x 6˝ x 6˝, Black
OR-MMAPL0612
Air Plug, 5˝ x 6˝ x 12˝, Black
OR-MMAPL0618
Air Plug, 5˝ x 6˝ x 18˝, Black
OR-MMAPL0624
Air Plug, 5˝ x 6˝ x 24˝, Black
They are made from Sandel™, a
fireproof material. Sandel originates
from sand, contains no asbestos
and is non-combustible at any
temperature. The Air Plugs are
available in several sizes to cover
most any opening and are easily
installed by simply squeezing the
plug and placing it in the opening
to be filled. All plugs have a height
of 5˝.
OR-MMAPL0909
Air Plug, 5˝ x 9 ˝ x 9 ˝, Black
OR-MMAPL0914
Air Plug, 5˝ x 9 ˝ x 14˝, Black
OR-MMAPL0918
Air Plug, 5˝ x 9 ˝ x 18˝, Black
OR-MMAPL0924
Air Plug, 5˝ x 9 ˝ x 24˝, Black
OR-MMAPL1212
Air Plug, 5˝ x 12˝ x 12˝, Black
OR-MMAPL1218
Air Plug, 5˝ x 12˝ x 18˝, Black
OR-MMAPL1224
Air Plug, 5˝ x 12˝ x 24˝, Black
OR-MMAPL1414
Air Plug, 5˝ x 14˝ x 14˝, Black
OR-MMAPL1616
Air Plug, 5˝ x 16˝ x 16˝, Black
OR-MMAPL1620
Air Plug, 5˝ x 16˝ x 20˝, Black
OR-MMAPL1624
Air Plug, 5˝ x 16˝ x 24˝, Black
OR-MMAPL1818
Air Plug, 5˝ x 18˝ x 18˝, Black
OR-MMAPL2024
Air Plug, 5˝ x 20˝ x 24˝, Black
OR-MMAPL2424
Air Plug, 5˝ x 24˝ x 24˝, Black
Mighty Mo Air Plug
116
MIGHTY MO® AIR CONTROL
Passive Cooling Solutions
NOTE: Product dimensions are listed by width, height and depth unless specified otherwise.
NEW
OR-MMAGCT2448
Mighty Mo Air Grille
The Air Grille is a ceiling vent that
is installed above the hot aisle.
This vent allows the hot exhaust air
to pass into the plenum instead of
recirculating throughout the
equipment room.
PART NO.
DESCRIPTION
OR-MMAGCT2424
Ceiling Vent, 24˝ x 24˝, pk of 30
OR-MMAGCT2448
Ceiling Vent, 24˝ x 48˝, pk of 30
117
MIGHTY MO® AIR CONTROL
Passive Cooling Solutions
NOTE: Product dimensions are listed by width, height and depth unless specified otherwise.
NEW
Mighty Mo CRAC Unit Air Extension
The CRAC Unit Air Extension mounts to the top of the CRAC unit and extends to
the drop ceiling. The Air Extension then draws higher temperature return air from
the ceiling, back to the CRAC unit,increasing cooling capacity and resulting in
increased CRAC unit efficiency. The Air Extension can also be used in rooms without drop ceilings
as well, acting as a snorkel to pull warmer air from above the CRAC unit to increase efficiency.
Mighty Mo Air Extensions are made of high grade aluminum and are manufactured to meet the individual
requirements of your data center.
Mighty Mo Air Extensions are manufactured to meet the individual requirements of your data center.
To determine part number you will need the following measurements:
Part Number Formula
OR-MMAE-
X
XX
Part Number
Prefix
Width of
Height from
top of CRAC
CRAC unit
to drop ceiling
X
-G
XXXX
Depth of
CRAC unit
Color
G = Cool
Gray
Numerical
Suffix
The height, width and depth are rounded to the nearest foot. The maximum height for an air
extension is 8 feet. The width and depth are based on the rough dimensions of the CRAC unit.
The 4 digit numerical suffix will be assigned after the quantity and location of access doors and
exact dimensions for your unit are determined.
WIDTH
118
DE
PT
H
HEIGHT
Please contact your Ortronics Representative or Technical Support to help configure your Mighty
Mo Air Extension.
HORIZONTAL CABLE MANAGEMENT,
SHELVES & ACCESSORIES Cable Management Panels
NOTE: Product dimensions are listed by width, height and depth unless specified otherwise.
Complete cable management maximizes system performance. Ortronics has the largest selection of horizontal cable managers
in the industry. This wide array of panel styles will meet all cable management requirements.
OR-60400131
Cable Management
Panels
Ortronics cable management
panels provide organized movement
of patch cables horizontally and
vertically on 19 ˝ EIA distribution
racks. Black.
®
OR-60400057
OR-808045590
OR-808004759
PART NO.
DESCRIPTION
OR-60400131
Five horizontal distribution rings,
1.7˝ H x 3.5˝ D, 1 rack unit
OR-60400057
Five horizontal distribution rings,
3˝ H x 4˝ D, 2 rack units
OR-808045590
Five horizontal polycarbonate plastic
distribution rings, 1.7˝ H x 6˝ D, 1 rack unit
OR-808004759
Five horizontal plastic distribution rings,
1.7˝ H x 2.70˝ D, 1 rack unit
OR-808004867
Five horizontal plastic distribution rings,
3.95˝ H x 2.4˝ D, 2 rack units
OR-808004818
Five horizontal plastic distribution rings,
3.95˝ H x 4.8˝ D, 2 rack units
OR-808044855
Four horizontal, four vertical distribution
rings, 2˝ H x 4˝ D, 24 routing clips,
.10˝ W x 2.63˝ D, 2 rack units
OR-808045768
Five horizontal polycarbonate plastic
distribution rings, 1.7˝ H x 3˝ D, 1 rack unit
NOTE: Includes #12-24 mounting hardware.
OR-808004867
OR-808004818
OR-808044855
OR-808045768
119
HORIZONTAL CABLE MANAGEMENT,
SHELVES & ACCESSORIES Cable Management Panels
NOTE: Product dimensions are listed by width, height and depth unless specified otherwise.
OR-60400129
OR-808044916
Feed-Through Cable
Management Panels
Ortronics® feed-through cable
management panels provide
organized management of patch
cables horizontally, vertically, and
from front to back on 19 ˝ EIA
distribution racks. Black.
PART NO.
DESCRIPTION
OR-60400129
Five horizontal distribution rings, 1.7˝ H x
3.5˝ D, four 1˝ x 2˝ cutouts, 1 rack unit
OR-808044916
Five horizontal distribution rings, 3˝ H x 2˝ D,
four 1.5˝ x 2˝ cutouts, 2 rack units
OR-60400426
Five horizontal distribution rings, 3˝ H x 4˝ D,
four 2.75˝ x 2.75˝ cutouts, 2 rack units
OR-808044915
Four horizontal, distribution rings, 2˝ H x 4˝ D,
24 routing clips, .10˝ W x 2.63˝ D, three
1.5˝ x 2˝ cutouts, 2 rack units
NOTE: Includes #12-24 mounting hardware.
OR-60400426
OR-808044915
120
HORIZONTAL CABLE MANAGEMENT,
SHELVES & ACCESSORIES Cable Management Panels
NOTE: Product dimensions are listed by width, height and depth unless specified otherwise.
OR-60400189
Bend Limiting Cable
Management Panels
Ortronics bend limiting cable
management panels have curved
falls that protect against cable
crimping and also maintain proper
bend radius. The panels are ideal
at the top of standard 19 ˝ EIA
racks. Black.
®
OR-60400099
PART NO.
DESCRIPTION
OR-60400189
1.7˝ H x 3.5˝ D rings with waterfall, 1 rack unit
OR-60400099
3.5˝ H x 3.5˝ D rings with waterfall, 2 rack units
OR-60400114
3.5˝ H x 6˝ D rings with waterfall, 2 rack units
OR-60400098
7˝ H x 4.5˝ D rings with waterfall, 4 rack units
OR-60400054
7˝ H x 7˝ D rings with waterfall, 4 rack units
NOTE: Includes #12-24 mounting hardware.
OR-60400114
OR-60400098
OR-60400054
OR-808000010
OR-808044508
Finger Duct Cable
Management Panels
Ortronics® closed cover finger duct
cable management panels provide organized movement for horizontal and
vertical routing of patch cables
on 19 ˝ EIA distribution racks. Black.
PART NO.
DESCRIPTION
OR-808000010
1.5˝ H x 1.5˝ D duct, 1 rack unit
OR-808044508
3˝ H x 1.5˝ D duct, 2 rack units
OR-808044549
3˝ H x 3˝ D duct, 2 rack units
OR-808045030
Front and rear ducts, 3˝ H x 3˝ D front duct,
2˝ H x 4˝ D rear duct, 2 rack units
NOTE: Includes #12-24 mounting hardware.
OR-808044549
OR-808045030
121
HORIZONTAL CABLE MANAGEMENT,
SHELVES & ACCESSORIES Equipment Shelves
NOTE: Product dimensions are listed by width, height and depth unless specified otherwise.
Front-Mount
Equipment Shelf
ESV-19-FMB
Solid Version
Features:
DESCRIPTION
OR-ES-19-FMB
5.25˝ H x 17.25˝ W x 14.00˝ D,
rack spaces: 3, load rating: 50 lbs
OR-ES-23-FMB
5.25˝ H x 21.25˝ W x 14.00˝ D,
rack spaces: 3, load rating: 50 lbs
■■
Cantilever shelf mounts in
several positions
■■
1/2˝ deep tray can be inverted
to create a flat surface for
deep equipment
■■
Mounts to 3˝ or 6˝ channel
PART NO.
DESCRIPTION
■■
Choose between standard or
vented version
OR-ESV-19-FMB
5.25˝ H x 17.25˝ W x 14.00˝ D,
rack spaces: 3, load rating: 50 lbs
■■
Mounting hardware included
OR-ESV-23-FMB
■■
Made of 16-gauge steel
5.25˝ H x 21.25˝ W x 14.00˝ D,
rack spaces: 3, load rating: 50 lbs
Vented Version
Black finish.
Multi-Configuration
Equipment Shelf
ES-19-MCSB
PART NO.
Features:
■■
Mounts in at least 14
different ways
■■
Mounts on 3˝ or 6˝ channel
equipment racks
■■
Brackets invert to meet mounting
space requirements
■■
Shelf can be inverted to create
a 3/4˝ deep tray
■■
Mount two units back-to-back to
form a double-sided shelf
■■
Mounting hardware included
■■
Made of 16-gauge steel
PART NO.
DESCRIPTION
OR-ES-19-MCSB
5.25˝ H x 17.50˝ W x 12.00˝ D,
rack spaces: 3, load rating: 50 lbs
Black finish.
Multi-Configuration Equipment Shelf Mounting Options
Shelf back to
rack center
Shelf front flush
to rack front
Shelf front 1-1/2˝
beyond rack front
OR-60400523
Computer Tie Down Kit
Two units form a
24˝ double-sided
shelf
Ortronics® CPU tie down kit includes mounting plates with
rubber bumpers which can be quickly attached to the EIA
pattern on the front and rear of any rack with a rail depth
from 3˝ to 6.5˝. The hook and loop strap with elastic center
safely holds the CPU in place against the rubber bumpers.
The CPU can be easily removed for service. Black.
122
Brackets can be
inverted to meet
mounting space
requirements
Brackets can be
inverted to meet
mounting space
requirements
Shelf can be
inverted to make
a 3/4˝ deep tray
PART NO.
DESCRIPTION
OR-60400523
One hook and loop type strap, two brackets
NOTE: Includes #12-24 mounting hardware.
Patent No. 6,598,270
HORIZONTAL CABLE MANAGEMENT,
SHELVES & ACCESSORIES Equipment Shelves
NOTE: Product dimensions are listed by width, height and depth unless specified otherwise.
OR-604044927
Wall Mount Shelf
Ortronics® wall mount shelf is designed
for smaller systems applications, or
where space is limited and a free
standing rack cannot be used. Black.
OR-60400550
OR-60400606
OR-60400575
Folding Keyboard Shelf
OR-KTF-19-DR
DESCRIPTION
OR-604044927
20˝ x 4.875˝ x 18˝, 120 lbs capacity
NOTE: Shelf has six keyholes in the rear for mounting.
Mounting hardware not included.
PART NO.
DESCRIPTION
This shelf has a keyboard tray which
folds up and locks in place. The tray
holds all full standard keyboards up
to 19˝ Wide. Black.
OR-60400550
19 ˝ rack mount, 1 rack unit
OR-60400551
23˝ rack mount, 1 rack unit
Rear Support Brackets
PART NO.
DESCRIPTION
Rear support brackets allow the folding
keyboard shelf to support any standard
computer monitor up to 35 lbs. The
brackets adjust from 6.25˝
to 17˝. Black.
OR-60400606
For folding keyboard shelf
Mouse Tray with Pad
PART NO.
DESCRIPTION
OR-60400575
For folding keyboard shelf
The mouse tray slides underneath the
keyboard tray when not in use. Black.
OR-KTR19-DR
PART NO.
NOTE: Mounting hardware included.
Keyboard Tray
PART NO.
DESCRIPTION
Features:
■■ Fits all standard keyboards and
mounts 19 ˝ equipment racks
OR-KTR19-DR
4.47˝ H x 20.38˝ W x 12.00˝ D,
load rating: 25 lbs
■■
Mouse pad tray slides beneath the
keyboard tray when not in use
■■
Mounting hardware is included
■■
Mouse pad can be mounted on left
or right side
■■
Constructed of 16-gauge steel
Black finish.
Fold-Up Keyboard Tray
PART NO.
DESCRIPTION
Features:
■■ Fits all standard keyboards and
mounts to 19 ˝ equipment racks
OR-KTF-19-DR
3.50˝ H x 20.38˝ W x 7.13˝ D,
load rating: 25 lbs
■■
Mouse pad tray slides beneath the
keyboard tray when not in use
■■
Keyboard tray folds upward against
uprights when not in use
■■
Mounting hardware is included
■■
Mouse pad can be mounted on left
or right side
■■
Constructed of 16-gauge steel
Black finish. Mouse pad tray adds 7.28˝ to the direction extended.
123
HORIZONTAL CABLE MANAGEMENT,
SHELVES & ACCESSORIES Rack and Cabinet Accessories
NOTE: Product dimensions are listed by width, height and depth unless specified otherwise.
NEW
OR-BFPT-1RU-10
Tool Less
Snap-in Filler Panels
Ortronics tool less snap-in filler panels
are used to fill open rack units in racks
and cabinets where separation of cold
air and hot air is required. They are
designed to work with active equipment
and Ortronics flat, angled or curved
patch panels.
®
OR-BFPT-2RU-10
PART NO.
DESCRIPTION
OR-BFPT-1RU-10
19 ˝ W x 1.75˝ H, 1 rack unit, pack of 10
OR-BFPT-2RU-10
19 ˝ W x 3.75˝ H, 2 rack unit, pack of 10
The tool less snap-in filler panels
unique patent pending design allows
them to snap into 19˝ EIA/ECA310-E compliant tapped or square
hole mounting rails. Because no field
modification is required to fit a tapped
hole, the panel can be remounted in
a square hole in the future eliminating
the need to stock two different types
of panels. Black.
OR-401004789
OR-401004790
Blank Filler Panels
Ortronics blank filler panels fill in open
spaces on all standard 19˝ EIA racks
and cabinets. They are composed
of black powder coated aluminum
and have a blue silkscreened logo.
Includes #12-24 mounting hardware.
Black.
Flat Blank Filler Panels
PART NO.
DESCRIPTION
OR-401004788
19 ˝ W x 1.75˝ H, 1 rack unit
OR-401004789
19 ˝ W x 3.5˝ H, 2 rack units
OR-401004790
19 ˝ W x 5.25˝ H, 3 rack units
OR-401004791
19 ˝ W x 7˝ H, 4 rack units
OR-401045773
19 ˝ W x 38.5˝ H, 22 rack units
Angled Blank Filler Panels
OR-BFPA-2RU
PART NO.
DESCRIPTION
OR-BFPA-1RU
19 ˝ W x 1.75˝ H, 1 rack unit
OR-BFPA-2RU
19 ˝ W x 3.5˝ H, 2 rack units
Curved Blank Filler Panels
OR-BFPC-1RU
124
PART NO.
DESCRIPTION
OR-BFPC-1RU
19 ˝ W x 1.75˝ H, 1 rack unit
HORIZONTAL CABLE MANAGEMENT,
SHELVES & ACCESSORIES Rack and Cabinet Accessories
NOTE: Product dimensions are listed by width, height and depth unless specified otherwise.
OR-604045108
Rack Adapter Kit
Ortronics® rack adapter kits allow
19˝ equipment to be used on 23˝
EIA racks. Includes #12-24 mounting
hardware. Black.
OR-60400383
19˝ Equipment
Support Bracket
PART NO.
DESCRIPTION
OR-604045108
19 ˝ to 23˝, 1.75˝ H, 1 rack unit
OR-604045109
19 ˝ to 23˝, 3.5˝ H, 2 rack units
OR-604045110
19 ˝ to 23˝, 5.25˝ H, 3 rack units
OR-604045111
19 ˝ to 23˝, 7.0˝ H, 4 rack units
OR-604045112
19 ˝ to 23˝, 8.75˝ H, 5 rack units
PART NO.
DESCRIPTION
OR-60400383
19 ˝ W x 1.75˝ H x 1˝ D
PART NO.
DESCRIPTION
OR-50900051
19 ˝ W, 8 outlet, 20 AMP, circuit breaker,
switch
OR-50900051-TL
19 ˝ W, 8 outlet, 20 AMP, circuit breaker,
switch, twist-lock plug
OR-50900052
19 ˝ W, 8 outlet, 20 AMP, circuit breaker
OR-50900052-TL
19 ˝ W, 8 outlet, 20 AMP, circuit breaker,
twist-lock plug
PART NO.
DESCRIPTION
OR-60400381
Vertical, 49 ˝, 16 outlet, 15 AMP, circuit
breaker, switch, 15´ cord
OR-60400681
Vertical, 49 ˝, 16 outlet, 20 AMP, circuit
breaker, switch, 15´ cord
Mounts on the rear of any 19˝ rack
to support the weight of heavy
equipment. The bracket is especially
effective on the Mighty Mo® racks
where the channel depth is 6.5˝ or
deeper. Includes #12-24 mounting
hardware. Black.
OR-50900051
19˝ Rack Mount
Power Strips
The 8 outlet 20 AMP rack mount
power strips are available with
or without a switch, and with a
standard 3 prong or twist-lock plug
design. All four power strips come
with 15´ of cord. Includes #12-24
mounting hardware. Black.
OR-60400381
Power Strip for
Mighty Mo Racks® and
Free Standing Cabinets
The 16-position power strip mounts
vertically on the back of the Mighty
Mo racks and on the inside frame
of the Mighty Mo cabinets. Includes
mounting hardware.
125
HORIZONTAL CABLE MANAGEMENT,
SHELVES & ACCESSORIES Rack and Cabinet Accessories
NOTE: Product dimensions are listed by width, height and depth unless specified otherwise.
OR-60400013
OR-CMBFR0RU
Wire Distribution Spool
PART NO.
DESCRIPTION
This spool has a #12-24 stud molded in
place and can be threaded into the EIA
holes on any Ortronics® rack. Use it to
mount cable management panels, patch
panels or screw it in anywhere additional
cable management is desired. Black.
OR-60400013
#12-24 stud
Cable Management
Support Bar, Zero RU
PART NO.
DESCRIPTION
OR-CMBFR0RU
19.00˝ W x 4.00˝ D
Cable Management
Support Bar
PART NO.
DESCRIPTION
OR-60400046
U-Type, 1.5˝ D, 19 ˝ W
Panel Mounting Screws
PART NO.
DESCRIPTION
OR-60400005
#12-24 x .625˝, package of 4
OR-60400533
#12-24 x .625˝, package of 50
Provides strain relief at the front or
rear of a standard 19 ˝ patch panel
that does not include rear management
panels. The support bar is mounted with
patch panel mounting screws to the
front or with the supplied additional nuts
to the rear. Black.
OR-60400046
Provides strain relief at the rear of
a standard 19 ˝ rack for horizontal
wiring cables that are terminated to
modular patch panels that do not
include this type of cable management.
Support bar is mounted with
thumbscrews to the rear upright
channels of a rack. Black.
OR-60400005
Ortronics® mounting screws replace
lost or damaged screws for patch
panels and cable management panels.
These combination head screws
with #12-24 threads have a pilot
point for easy starting. Black.
126
HORIZONTAL CABLE MANAGEMENT,
SHELVES & ACCESSORIES Rack and Cabinet Accessories
NOTE: Product dimensions are listed by width, height and depth unless specified otherwise.
Ortronics® cable management straps and accessories provide an organized solution for the management of patch and horizontal
distribution cables.
OR-70800205
Saddles
Ortronics self-adhesive saddles will
attach to any smooth dry surface and are
designed to accept the hook and loop
straps shown below. Sold in
packages of 10. Black.
OR-70700080
Color-Coded Cable
Management Straps
Ortronics color-coded cable management
straps provide an organized solution for
the management of patch and horizontal
distribution cables. The 3/4˝ W straps
have a hook and loop type closure to
secure and administer cables without
damaging the construction of the copper
or fiber cable. Sold in packages of ten.
OR-70700143
Plenum-Rated
Cable Management Straps
Ortronics plenum cable management
straps provide an organized solution for
the management of cables in plenum
rated air handling spaces. These 1/2˝
wide hook and loop type straps are
reusable, easy to install and will not
damage high performance cabling. Sold
in 20 count rolls that are neat,convenient
and quick to use. Cranberry.
OR-70700084-00
OR-60400199
D-Ring Cable
Management Straps
PART NO.
DESCRIPTION
OR-70800205
Two-way, self-adhesive base,
for cable management straps up to
1.25˝ maximum width
PART NO.
DESCRIPTION
OR-70700080
6˝ L x .75˝ W,
grip range: .625˝ to 1.625˝ diameter
OR-70700079
12˝ L x .75˝ W,
grip range: 1.25˝ to 3.25˝ diameter
NOTE: To order colored straps, specify color by putting color code at
end of part number Color Code: -00=Black, -22=Red, -23=Orange,
-24=Yellow, -25=Green, -26=Blue (Example: To order a 6˝ red
OR-70700080 strap: OR-70700080-22).
PART NO.
DESCRIPTION
OR-70700143
8˝ L x .5˝ W,
grip range: .75˝–1.75˝ diameter
OR-70700144
12˝ L x .5˝ W,
grip range: .75˝–3˝ diameter
PART NO.
DESCRIPTION
OR-70700107-00
12˝ L, grip range: 1.5˝ to 2.5˝ diameter
Ortronics D-Ring Cable Management
OR-70700084-00
Straps provide an organized solution
for the management of horizontal
distribution cables. The 3/4˝ W straps
have a hook and loop type closure to secure
and administer cables without damaging
the construction of the copper or fiber cable.
Sold in packages of ten. Black.
18˝ L, grip range: 2˝ to 4˝ diameter
Bend Limiting Strain
Relief Bar
PART NO.
DESCRIPTION
OR-60400199
19 ˝ x 1˝ x 2.5˝, fills 1 rack unit
Ortronics bend limiting strain relief bar
has curved falls that prevent distribution
cable from crimping and maintain proper
bend radius. The panel mounts to the
rear of standard 19˝ EIA racks. Route
cable ties through the holes in the bar
to hold cables in place.
127
BONDING & GROUNDING | RUNWAY & ACCESSORIES
Ground Bars and Kits
NOTE: Product dimensions are listed by width, height and depth unless specified otherwise.
OR-GB4X12TMGB
OR-GB4X20TMGB
Telecommunications Main
Ground Bars and Kits
Manufactured of 1/4˝ thick electrolytic
tough pitch 110 alloy copper bar.
Includes 1-1/2˝ insulators and 1˝ offset
stainless steel mounting brackets.
Includes one 1/2 oz. tube of antioxidant
joint compound. Meets BICSI and
EIA/TIA 607 standards.
Kits include:
OR-GB4X12TMGBKIT
OR-GB4X20TMGBKIT
128
■■
1 – Copper ground bar with
brackets and insulators
■■
6 – #6 compression lugs
■■
3 – #2 compression lugs
■■
1 – 2/0 compression lug
■■
1 – 4/0 compression lug
■■
12 – 1/4˝-20 x 3/4˝ SS hex
head cap screw
■■
12 – 1/4˝-20 SS lock washer
■■
12 – 1/4˝-20 SS hex nut
■■
6 – 3/8˝-16 x 1˝ SS hex
head cap screw
■■
6 – 3/8˝-16 SS lock washer
■■
6 – 3/8˝-16 SS hex nut
Telecommunications Main Ground Bars
PART NO.
DESCRIPTION
OR-GB4X12TMGB
Bar size: 12˝ W x 4˝ H, 12 5/16˝ hole
sets, 6 7/16˝ hole sets
OR-GB4X20TMGB
Bar size: 20˝ W x 4˝ H, 24 5/16˝ hole
sets, 6 7/16˝ hole sets
Telecommunications Main Ground Bar Kits
PART NO.
DESCRIPTION
OR-GB4X12TMGBKIT
Bar size: 12˝ W x 4˝ H, 12 5/16˝ hole
sets, 6 7/16˝ hole sets
OR-GB4X20TMGBKIT
Bar size: 20˝ W x 4˝ H, 24 5/16˝ hole
sets, 6 7/16˝ hole sets
BONDING & GROUNDING | RUNWAY & ACCESSORIES
Ground Bars and Kits
NOTE: Product dimensions are listed by width, height and depth unless specified otherwise.
OR-GB2X10TGB
OR-GB2X12TGB
Telecommunication
Ground Bars and Kits
Manufactured of 1/4˝ thick electrolytic
tough pitch 110 alloy copper bar.
Includes 1-1/2˝ insulators and 1˝ offset
stainless steel mounting brackets.
Includes one 1/2 oz. tube of antioxidant
joint compound. Meets BICSI and
EIA/TIA 607 standards.
Kits include:
■■ 1 – Copper ground bar with
brackets and insulators
OR-GB2X12TGBKIT
OR-GB4X12J
OR-GBWMBKIT
■■
6 – #6 compression lugs
■■
3 – #2 compression lugs
■■
1 – 2/0 compression lug
■■
1 – 4/0 compression lug
■■
12 – 1/4˝-20 x 3/4˝ SS hex
head cap screw
■■
12 – 1/4˝-20 SS lock washer
■■
12 – 1/4˝-20 SS hex nut
■■
6 – 3/8˝-16 x 1˝ SS hex
head cap screw
■■
6 – 3/8˝-16 SS lock washer
■■
6 – 3/8˝-16 SS hex nut
Standard Ground Bars
Wall Mounting
Bracket Kit
Telecommunications Ground Bars
PART NO.
DESCRIPTION
OR-GB2X10TGB
Bar size: 10˝ W x 2˝ H, 4 5/16˝ hole sets,
3 7/16˝ hole sets
OR-GB2X12TGB
Bar size: 12˝ W x 2˝ H, 6 5/16˝ hole sets,
3 7/16˝ hole sets
Telecommunications Ground Bar Kits
PART NO.
DESCRIPTION
OR-GB2X12TGBKIT
Bar size: 12˝ W x 2˝ H, 6 5/16˝ hole sets,
3 7/16˝ hole sets
PART NO.
DESCRIPTION
OR-GB4X12J
Bar size: 12˝ W x 4˝ H, 27 holes
OR-GB4X20J
Bar size: 20˝ W x 4˝ H, 51 holes
PART NO.
DESCRIPTION
OR-GBWMBKIT
Set of two brackets with insulators and
hardware to mount to a ground bar.
129
BONDING & GROUNDING | RUNWAY & ACCESSORIES
Ground Bars and Kits
NOTE: Product dimensions are listed by width, height and depth unless specified otherwise.
OR-GBV36
OR-GBV72
Equipment Rack
Ground Bars and Kits
Vertical Ground Bars
Manufactured of 1/4˝ thick electrolytic
tough pitch 110 copper alloy bar.
Accommodates one hole lugs or two
hole lugs (5/8˝ on center). 36˝ bar has
2 PEM studs at one end and the 72˝
bar has 2 PEM studs at both ends for
ground conductor connection.
PART NO.
DESCRIPTION
OR-GBV36
5/8˝ x 36˝ vertical ground bar
OR-GBV72
5/8˝ x 72˝ vertical ground bar
OR-GBV36KIT
5/8˝ x 36˝ vertical ground bar kit
OR-GBV72KIT
5/8˝ x 72˝ vertical ground bar kit
Kits Include:
OR-GBV36KIT
OR-GBV72KIT
n1 – 1/4˝ thick electrolytic tough pitch 110
copper alloy bar
n 8 – 1/4˝ x 1/2˝ stainless steel hex head
cap screw
n 3 – white delrin insulators
n 4 – 5/16˝ stainless steel lock washer
n 8 – 1/4˝ stainless steel lock washer
n3 – #12-24 x 5/8˝ hex washer head screw
n 4 – 5/16˝ stainless steel hex nut
n1 – two hole long barrel compression lug
OR-GBH19KIT
Horizontal Ground
Bar Kit
PART NO.
DESCRIPTION
OR-GBH19KIT
1˝ X 19.25˝ horizontal ground bar kit
Kits Include:
n 1 – 1/4˝ thick electrolytic tough pitch 110
copper alloy bar
n 1 – 3˝ bar splice plate with 2 slotted holes
n 2 – white delrin insulators
n 2 – 12-24 x 5/8˝ hex washer head screw
n 2 – #12-24 x 3/4˝ copper flashed
brass screw
n 2 – #12 copper flat washer
n 8 – #6-32 x 1/4˝ copper flashed brass screw
n 8 – #6 ring terminal
n 1 - #6 long barrel compression lug,
3/4˝ o.c. for 1/4˝ hardware
n 2 - 1/4˝-20 x 3/4˝ stainless steel cap screw
n 2 - 1/4˝ stainless steel lock washer
n 2 - 1/4˝-20 stainless steel nut
130
BONDING & GROUNDING | RUNWAY & ACCESSORIES
Compression Lugs and Taps
NOTE: Product dimensions are listed by width, height and depth unless specified otherwise.
OR-CL2LB6A
OR-CL2LB6C
OR-CL2LB2C
OR-CL2LB20C
OR-CL2LB6B
OR-CL2LB2A
Two Hole Long Barrel
Compression Lugs
Manufactured from electroplated
tinned copper. Long barrels maximize
number of crimps and are color coded.
Inspection port assures full conductor
insertion. Sold in packages of 10.
OR-CL2LB10C
PART NO.
CABLE
SIZE
OC
DIMENSION
BETWEEN
SCREW
HOLES
SIZE
OR-CL2LB6A
6
.625˝
1/4˝
Blue
OR-CL2LB6B
6
.75˝
3/8˝
Blue
OR-CL2LB6C
6
1˝
3/8˝
Blue
OR-CL2LB2A
2
.625˝
1/4˝
Brown
OR-CL2LB2C
2
1˝
3/8˝
Brown
OR-CL2LB10C
1/0
1˝
3/8˝
Pink
OR-CL2LB20C
2/0
1˝
3/8˝
Black
OR-CL2LB30C
3/0
1˝
3/8˝
Orange
OR-CL2LB40C
4/0
1˝
3/8˝
Purple
PART NO.
CONDUCTOR RUN
CONDUCTOR TAP
OR-CTHD4666
#4 Stranded
#6 Solid
#6 Stranded
#6 Solid
OR-CTHD4446
#4 Stranded
#6 Solid
#4 Stranded
#4 Solid
OR-CTHD2248
#2 Stranded
#2 Solid
#4 Stranded
#8 Solid
OR-CTHD2222
#2 Stranded
#2 Solid
#2 Stranded
#2 Solid
OR-CTHD220
2/0 Stranded
1/0 Solid
#2 Stranded
#8 Solid
COLOR
CODE
OR-CL2LB30C
OR-CL2LB40C
OR-CTHD4446
OR-CTHD4666
C-Type
Compression Taps
Connects two copper conductors
together with a hydraulic crimp tool.
Sold in packages of 10.
OR-CTHD2222
OR-CTHD2248
OR-CTHD220
131
BONDING & GROUNDING | RUNWAY & ACCESSORIES
Accessories
NOTE: Product dimensions are listed by width, height and depth unless specified otherwise.
Mechanical
Compression Tools
OR-MCT840
PART NO.
DESCRIPTION
OR-MCT840
Dieless adjustable compression tool with
steel handle. Works with copper conductor
sizes #8 through 250MCM and aluminum
conductors #8 through 4/0. For use with
compression lugs and compression taps.
OR-MCT810
Terminates copper compression connectors
in wire sizes #8 through 1/0. Dies included.
Insulated Ground
Jumper Kit
PART NO.
DESCRIPTION
OR-GJ8KIT
Ground jumper assembly kit, 6-7G, 8˝ length
Copper Offset
Terminal Lugs
PART NO.
DESCRIPTION
OR-COTL1014
Wire range: max 10 str, min 14 str,
bolt hole size: #8, ampere rating: 25
OR-COTL614
Wire range: max 6 str, min 14 str,
bolt hole size: #8, ampere rating: 50
OR-COTL28
Wire range: max 2 str, min 8 str,
bolt hole size: 1/4˝, ampere rating: 70
PART NO.
DESCRIPTION
This kit provides a reliable systems
ground for the distribution rack. One
grounding kit is recommended for
each rack.
OR-60400010
Single conductor ground lug for six AWG to
14 AWG conductors
Two Hole Ground Lug
PART NO.
DESCRIPTION
OR-GL2014
Bolt hole size: 1/4˝ O.C. Spacing 5/8˝
OR-MCT810
OR-GJ8KIT
OR-COTL1014
OR-COTL614
OR-COTL28
OR-60400010
OR-GL2014
Grounding Kit for Racks
Allows grounding of racks and
cabinets utilizing the standard
EIA/TIA hole pattern. Manufactured
of electro-tin plated aluminum and
allows attachment of copper or
aluminum conductor sizes from
14AWG to 2/0. Meets BICSI and
EIA/TIA 607 recommendations for two
hole mounting. Includes two 3/8˝ x 1˝
hex socket head set screws.
132
BONDING & GROUNDING | RUNWAY & ACCESSORIES
Accessories
NOTE: Product dimensions are listed by width, height and depth unless specified otherwise.
OR-PCU575
OR-PCU152
OR-PCU354
OR-PCU1125
Pipe Clamps
PART NO.
DESCRIPTION
Manufactured from electroplated
tinned bronze. Conductor range:
#6 through 250 MCM PEM stud
ensures a flush mounting surface.
Sold in packages of 5.
OR-PCU575
Nominal pipe size range: .5˝ - .75˝,
pipe outside diameter: .375˝ – 1˝
OR-PCU1125
Nominal pipe size range: 1˝ – 1.25˝,
pipe outside diameter: .75˝ – 1.7˝
OR-PCU152
Nominal pipe size range: 1.5˝ – 2˝,
pipe outside diameter: 1˝ – 2.4˝
OR-PCU253
Nominal pipe size range: 2.5˝ – 3˝,
pipe outside diameter: 2.25˝ – 3.5˝
OR-PCU354
Nominal pipe size range: 3.5˝ – 4˝,
pipe outside diameter: 3.2˝ – 4.5˝
OR-PCU56
Nominal pipe size range: 5˝ – 6˝,
pipe outside diameter: 5.63˝ – 6.63˝
OR-PCU253
OR-PCU56
Antioxidant Joint Compound
Oxide inhibiting joint compound used to improve electrical conductivity and enhance the integrity of the connection.
OR-AJCA
OR-AJCC
OR-AJCA8
OR-AJCC8
Aluminum Antioxidant
PART NO.
DESCRIPTION
Synthetic base with suspended zinc
particles. Material is gray in color.
Recommended for aluminum to
aluminum, aluminum to copper
and aluminum conduit threads.
OR-AJCA
1/2 oz., package of 12
OR-AJCA8
8 oz.
Copper Antioxidant
PART NO.
DESCRIPTION
OR-AJCC
1/2 oz., package of 12
Synthetic base compound with
OR-AJCC8
suspended copper particles. Material
is copper in color. Recommended for
copper to copper connections, copper
threads and all ground applications.
8 oz.
133
BONDING & GROUNDING | RUNWAY & ACCESSORIES
Tubular Runway & Accessories
NOTE: Product dimensions are listed by width, height and depth unless specified otherwise.
OR-TR10-12B
Tubular Runway
Flexibility is the key to cable
management. Ortronics® Cable
Runway is designed to adapt to
each twist and turn cables must
make. Made of lightweight
rectangular steel tubing, the
runway reduces floor loading and
is easy to install and maintain. Steel
meets stringent specifications for
yield and tensile strength, assuring
a strong, light weight product that
easily supports and delivers
overhead cable.
Features:
n Tubular cross slats welded to the
top of stringers
n Cross slats feature rounded
edges for cable protection
PART NO.
DOVE GRAY
PART NO.
BLACK
OR-TR6-6D
OR-TR6-6B
Dimensions: 6.00˝ W x 5´
11.00˝ L, load rating: 115 lbs
OR-TR6-12D
OR-TR6-12B
Dimensions: 12.00˝ W x 5´
11.00˝ L, load rating: 115 lbs
OR-TR6-18D
OR-TR6-18B
Dimensions: 18.00˝ W x 5´
11.00˝ L, load rating: 115 lbs
OR-TR6-24D
OR-TR6-24B
Dimensions: 24.00˝ W x 5´
11.00˝ L, load rating: 115 lbs
OR-TR10-6D
OR-TR10-6B
Dimensions: 6.00˝ W x 9´
8.50˝ L, load rating: 115 lbs
OR-TR10-12D
OR-TR10-12B
Dimensions: 12.00˝ W x 9´
8.50˝ L, load rating: 115 lbs
OR-TR10-18D
OR-TR10-18B
Dimensions: 18.00˝ W x 9´
8.50˝ L, load rating: 115 lbs
OR-TR10-24D
OR-TR10-24B
Dimensions: 24.00˝ W x 9´
8.50˝ L, load rating: 115 lbs
PART NO.
PART NO.
BLACK
OR-TRT10-6
OR-TRT10-6B
Dimensions: 6.00˝ W x 9´
8.50˝ L, load rating: 115 lbs
OR-TRT10-12
OR-TRT10-12B
Dimensions: 12.00˝ W x 9´
8.50˝ L, load rating: 115 lbs
OR-TRT10-18
OR-TRT10-18B
Dimensions: 18.00˝ W x 9´
8.50˝ L, load rating: 115 lbs
OR-TRT10-24
OR-TRT10-24B
Dimensions: 24.00˝ W x 9´
8.50˝ L, load rating: 115 lbs
DESCRIPTION
n Runway widths available from 6˝ to 24˝
n Two standard lengths:
5´11˝ or 9´ 8 1/2˝
Specifications:
n Stringers made of 3/8˝ x 1-1/2˝
high tensile tubular steel
n Cross slats are 1˝ x 1/2˝ tubular steel
n Rust-resistant dove gray, or black finish
n UL listed
OR-TRT10-6
Telco Style Tubular Runway
Features:
n Tubular cross slats are welded
between stringers
n Cross slats feature rounded
edges for cable protection
n Runway widths available from
6˝ to 24˝
n Standard length is 9´ 8 1/2˝
Specifications:
n Stringers made of 3/8˝ x 1-1/2˝
high tensile tubular steel
n Cross slats are 1˝ x 1/2˝ tubular steel
n Rust-resistant dove gray, or black finish
n UL listed
134
DESCRIPTION
BONDING & GROUNDING | RUNWAY & ACCESSORIES
Tubular Runway & Accessories
NOTE: Product dimensions are listed by width, height and depth unless specified otherwise.
OR-TRTC-12D
Curved Runway
Radius curved runway permits
smooth vertical to horizontal
transitions. Stringers are
1-1/2˝ x 3/8˝ steel tubes;
cross slats are 1˝ x 1/2˝ x 1/8˝
steel tubes. UL listed.
Outside Curved Runway
PART NO.
DOVE GRAY
PART NO.
BLACK
DESCRIPTION
OR-TRTC-6D
OR-TRTC-6B
11.50˝ H x 6.00˝ W x 11.50˝ D
OR-TRTC-12D OR-TRTC-12B 11.50˝ H x 12.00˝ W x 11.50˝ D
OR-TRTC-18D OR-TRTC-18B 11.50˝ H x 18.00˝ W x 11.50˝ D
OR-TRTC-24D OR-TRTC-24B 11.50˝ H x 24.00˝ W x 11.50˝ D
Inside Curved Runway
PART NO.
DOVE GRAY
PART NO.
BLACK
DESCRIPTION
OR-TRTCI-6D
OR-TRTCI-6B
11.50˝ H x 6.00˝ W x 11.50˝ D
OR-TRTCI-12D OR-TRTCI-12B 11.50˝ H x 12.00˝ W x 11.50˝ D
OR-TRTCI-18D OR-TRTCI-18B 11.50˝ H x 18.00˝ W x 11.50˝ D
OR-TRTCI-24D OR-TRTCI-24B 11.50˝ H x 24.00˝ W x 11.50˝ D
OR-TRHR-12B
OR-TRTHR-12B
Horizontal Radius
Runway
Horizontal radius runway allows
cables to be routed around
horizontal corners. The horizontal
radius runway features stringers
made of 1-1/2˝ x 3/8˝ steel tubes;
cross slats are 1˝ x 1/2˝ x 1/8˝
steel tubes. UL listed.
TR Style
PART NO.
DOVE GRAY
PART NO.
BLACK
DESCRIPTION
OR-TRHR-12D OR-TRHR-12B
12.00˝ W x 18.03˝ IR x
29.66˝ OR*
OR-TRHR-18D OR-TRHR-18B
18.00˝ W x 18.03˝ IR x
35.66˝ OR*
TRC Style
PART NO.
DOVE GRAY
PART NO.
BLACK
DESCRIPTION
OR-TRTHR-12D OR-TRTHR-12B
12.00˝ W x 18.03˝ IR x
29.66˝ OR*
OR-TRTHR-18D OR-TRTHR-18B
18.00˝ W x 18.03˝ IR x
35.66˝ OR*
*IR= Inside radius; OR= Outside radius
135
BONDING & GROUNDING | RUNWAY & ACCESSORIES
Tubular Runway & Accessories
NOTE: Product dimensions are listed by width, height and depth unless specified otherwise.
OR-P413512H-TB
End Closing Tubes
End closing tubes are used when
junctioning runway sections of
different widths, or closing the
stringers of a single piece of runway.
They are used together with corner,
edge or straight clamps. Made of
3/8˝ x 1-1/2˝ tubular steel.
OR-RECBK-12B
End Closing Kit
The end closing kit includes one end
closing tube and two corner clamps
for closing the stringers of a single
piece of runway.
OR-WRTRT-12B
Runway Wall to Rack Kit
The runway wall to rack kit provides
support for cable between the rack
and the wall.
Kit consists of:
PART NO.
DOVE GRAY
PART NO.
BLACK
DESCRIPTION
OR-P413511H-TD OR-P413511H-TB
1.50˝ H x 5.75˝ W x
0.38˝ D, use with 6˝
OR-P413512H-TD OR-P413512H-TB
1.50˝ H x 11.75˝ W x
0.38˝ D, use with 12˝
OR-P413530H-TD OR-P413530H-TB
1.50˝ H x 17.75˝ W x
0.38˝ D, use with 18˝
OR-P413531H-TD OR-P413531H-TB
1.50˝ H x 23.75˝ W x
0.38˝ D, use with 24˝
PART NO.
DOVE GRAY
PART NO.
BLACK
DESCRIPTION
OR-RECBK-6
OR-RECBK-6B
For use with 6˝ runway
OR-RECBK-12
OR-RECBK-12B
For use with 12˝ runway
OR-RECBK-18
OR-RECBK-18B
For use with 18˝ runway
OR-RECBK-24
OR-RECBK-24B
For use with 24˝ runway
PART NO.
DOVE GRAY
PART NO.
BLACK
DESCRIPTION
OR-WRTRT-12B
Kit of 1-4´ 5-1/2˝ long
runway, 1-wall angle
assembly, 1-runway
bracket kit and 1-set of
end caps
OR-WRTRT-12
n (1) 12˝ wide 4´ 5-1/2˝ long tubular
runway with channels
n (1) 12˝ wide wall angle assembly
n (1) Runway bracket kit
n (1) Set of end caps
Features:
n Works with standard equipment racks of all
channel depths and all Mighty Mo 3, Mighty
Mo 6 and Mighty Mo 10 rack systems
OR-GS-8
Ground Strap
Ground straps provide grounding
between spliced runway. Simply
pre-drill runway to accept the strap,
and connect to runway sections using
compression lugs.
PART NO.
DESCRIPTION
OR-GS-8
Dimensions* 8.75˝ L x 0.63˝ H
*Lug hole-to-lug hole length is 8.00˝. Runway clearance hole
for 1/4-20˝ is needed to mount ground strap.
Features:
n All compression lugs and 1/4-20˝ hardware
included: (1) 8˝ ground strap, (2) compression
lugs, (2) toothed lock washers, (2) hex nuts
n Constructed of flexible tinned copper flat braid
136
BONDING & GROUNDING | RUNWAY & ACCESSORIES
Tubular Runway & Accessories
NOTE: Product dimensions are listed by width, height and depth unless specified otherwise.
OR-P820127H
OR-P820147H
Straight & Corner
Clamp Assemblies
Clamps are used to junction runway
sections together in a variety of
configurations. Whether sections
are extended in-line or junctioned
perpendicularly or are transitioned
from horizontal to vertical, clamps
provide a solid connection to assure
the runway layout will provide the
necessary support for your cabling.
Straight Clamp
PART NO.
DESCRIPTION
OR-P820127H
Straight clamp kit - 2 straight clamps
OR-P820367H
Straight clamp kit - For different
stringer widths - 2 clamps with filler
Corner Clamp
PART NO.
DESCRIPTION
OR-P820147H
Corner clamp kit - 2 corner clamps
Clear zinc plated.
OR-P820127HA
Adjustable Angle Splice Kit
Adjustable angle splices junction
runway sections from separate
horizontal planes for smooth
vertical transitions.
OR-P820287H
Edge Clamp Assemblies
Edge clamps junction runway of the
same width where horizontal-to-vertical
and horizontal-to-horizontal transitions
are needed.
PART NO.
DESCRIPTION
OR-P820127HA
Two adjustable angles
Clear zinc plated.
45° Edge Clamp
PART NO.
DESCRIPTION
OR-P820287H
45° edge clamp kit - 2 edge clamps
90° Edge Clamp
PART NO.
DESCRIPTION
OR-P820327H
90° edge clamp kit - 2 edge clamps
Clear zinc plated.
137
BONDING & GROUNDING | RUNWAY & ACCESSORIES
Tubular Runway & Accessories
NOTE: Product dimensions are listed by width, height and depth unless specified otherwise.
OR-CF-6D
Cable Fence
Cable fence is available in 6˝ or 12˝
and provides added cable capacity for
TR or TRT runway. One set includes
10 pieces that attach to runway as
needed. Ortronics® recommends
placing cable fence to every other
cross member to support large
cable piles.
OR-CFTRC-6
For use with TR runway
PART NO.
DOVE GRAY
PART NO.
BLACK
OR-CF-6D
OR-CF-6B
6.00˝ H x 2.63˝ W x 0.19 ˝ D
OR-CF-12D
OR-CF-12B
12.00˝ H x 2.63˝ W x 0.19 ˝ D
DESCRIPTION
For use with any 1-1/2˝ runway
PART NO.
DOVE GRAY
PART NO.
BLACK
DESCRIPTION
OR-CFTRC-6
OR-CFTRC-6B
6.00˝ H x 0.75˝ W x 1.15˝ D
OR-CFTRC-12 OR-CFTRC-12B 12.00˝ H x 0.75˝ W x 1.15˝ D
OR-P401750H-1D
Cable Runway Feet
Cable runway feet anchor runway to
the wall or floor. Feet are attached to
runway with clamps. Made of 3/8˝ x
1-1/2˝, steel bar. One foot included.
OR-P139240HD
Shelf Brackets
Shelf brackets attach to the wall and
extend up to 24˝ for heavy duty runway
support. Runway is secured to the
bracket with J-bolts (included). Made
of 3/16˝ x 1˝, steel bar. Hardware is
zinc plated and dichromated.
OR-P820527H
Cable Bracket
The Ortronics steel cable bracket
offers a separate channel for power
cables that must not contact primary
cables. Mounting hardware included.
Mounts on 1-1/2˝ and 2˝ stringers.
138
PART NO.
DOVE GRAY
PART NO.
BLACK
DESCRIPTION
OR-P401750H-1D OR-P401750H-1DB
6.00˝ H x 2.00˝ W x
1.50˝ D
OR-P820827H
OR-P820827HB
Kit of two 6˝ H cable
runway feet and 2
straight clamps
PART NO.
DOVE GRAY
PART NO.
BLACK
OR-P139240HD
OR-P139240HB
A 6.44˝, B 6.44˝,
runway width: 6.00˝
OR-P139340HD
OR-P139340HB
A 12.44˝, B 12.44˝,
runway width: 12.00˝
OR-P139540HD
OR-P139540HB
A 18.44˝, B 18.44˝,
runway width: 18.00˝
OR-P139740HD
OR-P139740HB
A 24.44˝, B 24.44˝,
runway width: 24.00˝
PART NO.
DOVE GRAY
PART NO.
BLACK
OR-P820527H
OR-P820527HB
DESCRIPTION
DESCRIPTION
4.50˝ H x 5.00˝ D,
1.30 lbs
BONDING & GROUNDING | RUNWAY & ACCESSORIES
Tubular Runway & Accessories
NOTE: Product dimensions are listed by width, height and depth unless specified otherwise.
OR-TRP5-CM
Transition Pans
Assure the proper bend radius for
cables delivered from overhead runway
to equipment racks with our transition
pan. Each pan clamps to runway cross
members or runway stringers (TRP8-S).
Truss head screws with protective
covers assure cables aren’t damaged.
Provides 1.25˝ radius.
OR-P128040HD
Wall Angle Assemblies
DESCRIPTION
OR-TRP5-CM
2.00˝ H x 5.00˝ W x 4.13˝ D
OR-TRP8-CM
2.00˝ H x 8.00˝ W x 4.13˝ D
OR-TRP11-CM
2.00˝ H x 11.00˝ W x 4.13˝ D
OR-TRP17-CM
2.00˝ H x 17.00˝ W x 4.13˝ D
OR-TRP8-S
2.00˝ H x 7.50˝ W x 4.63˝ D
Black finish. CM= pan mounts on runway cross member;
S= pan mounts on runway stringer.
PART NO.
DOVE GRAY
PART NO.
BLACK
DESCRIPTION
OR-P128040HD
OR-P128040HB
For runway width: 6.00˝
OR-P128240HD
OR-P128240HB
For runway width: 12.00˝
OR-P128440HD
OR-P128440HB
For runway width: 18.00˝
OR-P128640HD
OR-P128640HB
For runway width: 24.00˝
Runway Ceiling Kit
PART NO.
DESCRIPTION
Kit consists of:
OR-RCBK-6
The Runway Ceiling Kit is used to suspend
cable runway from the ceiling.
PART NO.
DESCRIPTION
OR-REK-2-3
2˝, 2.5˝ or 3˝
OR-REK-4-6
4˝, 5˝ or 6˝
Wall angle assemblies attach to the
wall and provide a shelf or edge on
which runway can be anchored
using J-bolts. Anchoring can be either
parallel or perpendicular to the wall.
Includes 2˝ x 2˝ x 1/4˝ steel angle, two
J-bolts, two 1/4-20˝ hex nuts, and two
1/4˝ lock washers. Hardware is zinc
plated and dichromated.
OR-RCBK-6
PART NO.
n (1) Ceiling hanger bracket
n (1) Closed clip
n (1) 5/8-11 x 6ft threaded rod
n (4) 5/8-11 hex nuts
OR-REK-2-3
Runway Elevation Kit
Used to provide additional space
between the tops of racks or cabinets
and the runway. Can be mounted to
the runway junction plates, Mighty Mo®
runway support brackets or to the rear
flange of a Mighty Mo rack. Can also
be mounted to the Mighty Mo cabinets
simply by drilling two holes into the
cabinet’s removable top plates.
Black finish.
139
BONDING & GROUNDING | RUNWAY & ACCESSORIES
Tubular Runway & Accessories
NOTE: Product dimensions are listed by width, height and depth unless specified otherwise.
OR-P400298HD
Ceiling Hanger Brackets
When ceiling support is required, ceiling
hanger brackets are used with 5/8-11˝
threaded rods and open or closed clips
to suspend runway overhead.
PART NO.
DOVE GRAY
PART NO.
BLACK
DESCRIPTION
OR-P400298HD OR-P400298HB (1) Bracket
OR-P820667HD OR-P820667HB (1) Bracket; (2) nuts
OR-P820677HD OR-P820677HB
(1) Bracket; (2) nuts;
(1) plate*
* Plate color matches bracket.
OR-2-E1-25C-A
Protective Rubber
End Caps
Protective end caps conceal sharp
runway edges that may harm the
installation or injure those administering
the installation. Sold in pairs.
OR-RHB-12B
Runway Hanger Brackets
Cable runway feet anchor runway to
the wall or floor. Feet are attached to
runway with clamps. Made of 3/8˝ x
1-1/2˝, steel bar. One foot included.
OR-P406395H
Open Clips
Use open clips with 1-1/2˝ stringers
to secure runway to threaded rods
when suspending runway from the
ceiling. Also use when stacking
runway. Use with 5/8-11˝ threaded
rod. Made of 3/16˝ x 1-1/2˝ steel bar.
UL classified.
OR-P429503H
Closed Clips
Use closed clips with 1-1/2˝ stringers to
secure runway to threaded rods when
suspending runway from the ceiling.
Also use when stacking runway. Use
with 5/8-11˝ threaded rod. Made of
1/4˝ x 1-1/4˝ steel bar. UL classified.
OR-P982078HD
Vertical Wall Bracket
Made of 1/8˝ x 2 steel, vertical wall
brackets fasten runway to the wall
and provide a secure route for cables
to channel vertically. Use 7/16˝
mounting hardware (not included).
One bracket included.
140
PART NO.
DESCRIPTION
OR-2-E1-25C-A For 1-1/2˝ stringers
Black rubber.
PART NO.
DOVE GRAY
PART NO.
BLACK
DESCRIPTION
OR-RHB-06D
OR-RHB-06B
12.00˝ H x 6.38˝ W x 2.00˝ D,
runway width: 6.00˝
OR-RHB-12D
OR-RHB-12B
12.00˝ H x 12.38˝ W x 2.00˝ D,
runway width: 12.00˝
PART NO.
DESCRIPTION
OR-P406395H
(1) clip
OR-P820547H
Two sides - (2) clips; (4) nuts
Clear zinc plated.
PART NO.
DESCRIPTION
OR-P429503H
(1) clip
OR-P820477H
Two sides - (2) clips; (4) nuts
Clear zinc plated.
PART NO.
DOVE GRAY
PART NO.
BLACK
DESCRIPTION
OR-P982078HD OR-P982078HB 1.50˝ H x 2.00˝ W x 2.53˝ D
BONDING & GROUNDING | RUNWAY & ACCESSORIES
Tubular Runway & Accessories
NOTE: Product dimensions are listed by width, height and depth unless specified otherwise.
OR-P987650H
Threaded Rods (5/8-11˝)
Threaded rods are available in a variety
of lengths to support runway sections
suspended from the ceiling. Includes
two 5/8-11˝ hex nuts and two 5/8˝
flat washers.
OR-2-E1-75
Threaded Rod Coupler
PART NO.
DESCRIPTION
OR-P987650H
Length of rod 5´
OR-P987649H
Length of rod 6´
OR-P987645H
Length of rod 10´
Zinc plated and dichromated.
PART NO.
DESCRIPTION
OR-2-E1-75
Join two 5/8˝ threaded rods together,
kit contents: (1) 5/8˝ coupler,
(2) 5/8˝ x 11˝ hex nut
Protective Sleeve
PART NO.
DESCRIPTION
Slitted protective sleeves cover
threaded rods to protect cables from
damage. Field cut to desired size.
OR-2-E2-TRPC
10´ PVC protective sleeve for
5/8-11˝ threaded rod
J-Bolt Assemblies
PART NO.
DESCRIPTION
Each J-bolt assembly includes one
1/4-20˝ or 5/16-18˝ hex nut and
one 1/4˝ or 5/16˝ lock washer.
UL classified.
OR-P987529H
A = 1.75˝, B = 0.250˝, C = 0.50˝, D = 0.75˝,
thread size: 1/4-20
OR-P987528H
A = 3.25˝, B = 0.438˝, C = 0.75˝, D = 1.50˝,
thread size: 1/4-20
OR-P987527H
A = 2.25˝, B = 0.438˝, C = 0.75˝, D = 1.00˝,
thread size: 1/4-20
OR-P987526H
A = 3.75˝, B = 0.313˝, C = 0.75˝, D = 1.25˝,
thread size: 5/16-18
OR-P987525H
A = 3.25˝, B = 0.313˝, C = 0.75˝, D = 0.75˝,
thread size: 5/16-18
OR-P987524H
A = 3.25˝, B = 0.438˝, C = 0.75˝, D = 1.50˝,
thread size: 5/16-18
OR-P987523H
A = 2.25˝, B = 0.438˝, C = 0.75˝, D = 1.00˝,
thread size: 5/16-18
Features:
n Extend threaded rod length with
spliced coupling
n Yellow zinc dichromate finish
n Constructed of steel
OR-2-E2-TRPC
OR-P987527H
Clear zinc plated.
141
H IGH P E RF ORM A N C E S T R U C T U R E D C A BLIN G
PR OD UCT S & S O L U T I O N S
OptiMo Fiber
Optic Solutions
®
Enclosures
Cassettes
Adapter
Panels
Patch
Cords
Ideal for data center/SAN or enterprise LAN applications,
OptiMo fiber optic solutions support common, convenient
approaches to fiber optic cabling. Momentum® series
modular optical cassettes provide a system that is simple to
Field-Installable
Connectors
design, quick to install, highly reliable and error-proof. For a
conventional field-installation as well as factory-terminated
pigtails for a splicing approach, we offer no-epoxy/no-polish
and quick-cure anaerobic field-installable connectors. Also,
for Secure Keyed LC fiber products, contact Ortronics®. For
Fiber Optic
Workstation
all your installations, OptiMo fiber solutions guarantee quality
and performance.
F E AT U R E D P R O D U C T S
Ortronics is a solution developer
partner within the Cisco
Developer Network
FC Series
Rack Mount
Cabinets
146
P.
NEW
P.145
OptiMo® High
Density Rack
Mount Fiber
Cabinets
P.152
Pre-loaded
Rack Mount
Fiber Cabinets
P.160
Momentum® 4
Modular
Pre-Terminated
Systems
P.160
Momentum 2
Modular
Pre-Terminated
Systems
P.161
High
Density
Adapter
Panels
P.161
Adapter
Panels
P.163
SpaceSaver
Fiber Optic
Cable
Assemblies
P.165
Finer Optic
Cable
Assemblies
P.173
OptiMo
Pre-Polished
Connectors
P.179
OptiMo
Field-Installable
Anaerobic
Connectors
P.181
Fib-or-Cop II
P.183
TracJack
Modules and
Faceplates
P.156
Surface Mount
Fiber Cabinets
Momentum
Cassettes
Adapter
Panels
P.
P.
160
161
OPTIMO® FIBER OPTIC SOLUTIONS
Ortronics® offers innovative fiber optic solutions to meet all your needs with greater
density, simpler installation, easier administration and higher performance.
The Ortronics range of rack mount fiber enclosures offers a comprehensive
selection of products ideally suited to both large and small fiber installations. All
fiber cabinets and related hardware are compatible with Mighty Mo® advanced
cable management systems, so one system meets all cabling needs.
HIGH DENSITY
Choose the appropriate pre-terminated cassettes and adapter panels required for either the
High Density system or for the standard density solution from the table below.
144
ENCLOSURE
TYPE
CAPACITY
CASSETTE
ADAPTER PANEL
OR-FC01U-M
Patch & Splice
High Density
OR-M4 Series
OR-HDFP Series
OR-FC02U-M
Patch & Splice
High Density
OR-M4 Series
OR-HDFP Series
OR-FC03U-M
Patch & Splice
High Density
OR-M4 Series
OR-HDFP Series
OR-FC04U-M
Patch & Splice
High Density
OR-M4 Series
OR-HDFP Series
OR-FC01U-C
Patch & Splice
Standard Density
OR-M2 Series
OR-OFP Series
OR-FC02U-C
Patch & Splice
Standard Density
OR-M2 Series
OR-OFP Series
OR-FC03U-C
Patch & Splice
Standard Density
OR-M2 Series
OR-OFP Series
OR-FC04U-C
Patch & Splice
Standard Density
OR-M2 Series
OR-OFP Series
OR-FC01U-P
Patch
Standard Density
OR-M2 Series
OR-OFP Series
OR-FC02U-P
Patch
Standard Density
OR-M2 Series
OR-OFP Series
OR-FC03U-P
Patch
Standard Density
OR-M2 Series
OR-OFP Series
OR-FC04U-P
Patch
Standard Density
OR-M2 Series
OR-OFP Series
OR-FC01U-S
Splice
Standard Density
N/A
N/A
OR-FC02U-S
Splice
Standard Density
N/A
N/A
OR-FC03U-S
Splice
Standard Density
N/A
N/A
OR-FC04U-S
Splice
Standard Density
N/A
N/A
ENCLOSURES
Rack Mount Fiber Cabinets High Density
NEW
In today’s data centers and SAN environments, space is often at a premium,
making density more critical than ever. OptiMo® High Density (HD) solutions offer
the same
advanced performance and reliability that you’ve come to expect from Ortronics®
standard density OptiMo products in a footprint designed for space-constrained
installations. Using a comprehensive OptiMo HD solution of high density rackmount fiber cabinets with either adapter panels or pre-terminated cassettes
provides a
complete fiber cross connect patching solution for applications where maximum
density is required.
OR-FC01U-M
OR-FC02U-M
OR-FC03U-M
OptiMo HD
FC Series Rack-Mount
Fiber Cabinets
OptiMo high density rack-mount
fiber enclosures come complete
with internal fiber management
hardware and bend limiting clips
for superior fiber management.
These enclosures are compatible
with all Ortronics Mighty Mo®
equipment racks and cabinets.
They are only able to accept
M4 cassettes and HDFP adapter
panels. They are optimally
designed for 48 fiber splice trays.
PART NO.
DESCRIPTION
OR-FC01U-M
nHigh density 1U rack mount FC series fiber
enclosure, black
nHolds 4 high density HDFP series adapter
panels or M4 high density cassettes
nHolds two 48-F splice trays*
nFront locking door
nFiber tray slides to the front or the rear
nLC capacity: 96 fibers
n1.75˝ high, 1 rack unit, 15.65 lbs/7.10kg
nIncludes internal management clips
OR-FC02U-M
nHigh density 2U rack mount FC series fiber
enclosure, black
nHolds 8 high density HDFP series adapter
panels or M4 high density cassettes
nHolds four 48-F splice trays*
nFront locking door
nFiber tray slides to the front or the rear
nLC capacity: 192 fibers
n3.5˝ high, 2 rack units, 16.75 lbs/7.62kg
nIncludes bend limiting clips and internal
management clips
OR-FC03U-M
nHigh density 3U rack mount FC series fiber
enclosure, black
nHolds 12 high density HDFP series adapter
panels or M4 high density cassettes
nHolds seven 48-F splice trays*
nFront locking door
nFiber tray slides to the front or the rear
nLC capacity: 288 fibers
n5.25˝ high, 3 rack units, 18.50 lbs/8.40kg
nIncludes bend limiting clips and internal
management clips
OR-FC04U-M
nHigh density 4U rack mount FC series fiber
enclosure, black
nHolds 16 high density HDFP series adapter
panels or M4 high density cassettes
nHolds ten 48-F splice trays*
nFront locking door
nFiber tray slides to the front or the rear
nLC capacity: 384 fibers
n7˝ high, 4 rack units, 20.65 lbs/9.36kg
nIncludes bend limiting clips and internal
management clips
OR-FC04U-M
* NOTE: Splice tray capacity exceeds the fiber port capacity of the enclosures.
145
ENCLOSURES
Rack Mount Fiber Cabinets Patching
OR-FC01U-P
OR-FC02U-P
OR-FC03U-P
OptiMo® FC Series
Fiber Patch Cabinets
Each fiber cabinet offers
complete flexibility in terms of
cable entry and exit, access to
terminations from front and rear,
and accommodates the unique
needs of optical fiber bend radius
limitation through enhanced
patch cord management
devices and novel internal fiber
management components.
These enclosures are only
compatible with M2 cassettes
and OFP adapter panels.
PART NO.
DESCRIPTION
OR-FC01U-P
nHolds three adapter panels or
Momentum® cassettes
nFront locking door
nFiber tray slides forward and backward
nST, SC, FC capacity: 36 fibers
nMT-RJ, LC: 36 fibers
nLC quad: 72 fibers
n1.75˝H, 1 rack unit, 15.65 lbs/7.10 kg
nIncludes internal management clips
OR-FC02U-P
nHolds six adapter panels or Momentum
cassettes
nFront locking door
nFiber tray slides forward and backward
nST, SC, FC capacity: 72 fibers
nMT-RJ, LC: 72 fibers
nLC quad: 144 fibers
n3.5˝H, 2 rack units, 16.75 lbs/7.62 kg
nIncludes bend limiting clips and internal
management clips
OR-FC03U-P
nHolds nine adapter panels or
Momentum cassettes
nFront locking door
nFiber tray slides forward and backward
nST, SC, FC capacity: 108 fibers
nMT-RJ, LC: 108 fibers
nLC quad: 216 fibers
n5.25˝H, 3 rack units, 18.50 lbs/8.40 kg
nIncludes bend limiting clips and internal
management clips
OR-FC04U-P
nHolds twelve adapter panels or
Momentum cassettes
nFront locking door
nFiber tray slides forward and backward
nST, SC, FC capacity: 144 fibers
nMT-RJ, LC: 144 fibers
nLC quad: 288 fibers
n7˝H, 4 rack units, 20.65 lbs/9.36 kg
nIncludes bend limiting clips and internal
management clips
OR-FC04U-P
NOTE: Splice trays sold separately.
146
ENCLOSURES
Rack Mount Fiber Cabinets Patching & Splicing
OR-FC01U-C back/front view
OR-FC02U-C back/front view
OR-FC03U-C back/front view
OptiMo® FC Series
Fiber Patch and
Splice Cabinets
Each fiber cabinet offers
complete flexibility allowing
the ability to patch and splice in
the same cabinet. Each cabinet
has optimized cable entry and
exit points, allows access to
terminations from front and rear,
and accommodates the unique
needs of optical fiber bend radius
limitation through enhanced
patch cord management
devices and novel internal fiber
management components.
These enclosures are only
compatible with M2 cassettes
and OFP adapter panels.
PART NO.
DESCRIPTION
OR-FC01U-C
nHolds two (12 fiber) splice trays
nHolds three adapter panels
nFront locking door
nST, SC, FC capacity: 36 fibers
nMT-RJ, LC: 36 fibers
nLC quad: 72 fibers
n1.75˝H, 1 rack unit, 15.65 lbs/7.10 kg
nIncludes internal management clips
OR-FC02U-C
nHolds six (12 fiber) splice trays
nFront locking door
nHolds six adapter panels
nST, SC, FC capacity: 72 fibers
nMT-RJ, LC: 72 fibers
nLC quad: 144 fibers
n3.5˝H, 2 rack units, 16.75 lbs/7.62 kg
nIncludes bend limiting clips and internal
management clips
OR-FC03U-C
nHolds 11 (12 fiber) splice trays
nFront locking door
nHolds nine adapter panels
nST, SC, FC capacity: 108 fibers
nMT-RJ, LC: 108 fibers
nLC quad: 216 fibers
n5.25˝H, 3 rack units, 18.50 lbs/8.40 kg
nIncludes bend limiting clips internal
management clips
OR-FC04U-C
nHolds 16 (12 fiber) splice trays
nFront locking door
nHolds 12 adapter panels
nST, SC, FC capacity: 144 fibers
nMT-RJ, LC: 144 fibers
nLC quad: 288 fibers
n7˝H, 4 rack units, 20.65 lbs/9.36 kg
nIncludes bend limiting clips and internal
management clips
OR-FC04U-C back/front view
* NOTE: Splice tray capacity exceeds the fiber port capacity of the enclosures.
147
ENCLOSURES
EMEA Rack Mount Fiber Cabinets Patching
OR-61500569-00
Standard Low Profile Rack
Mount Patch Fiber Cabinets
PART NO.
The Ortronics® range of 615 series
mount fibre enclosure is ideally
OR-61500569-00
suited to both large and small fibre
installations. Designed for use with
our FibreMo fibre optic cable
management rack system and our
equipment cabinets, our fibre cabinet
offers complete flexibility in terms of
cable entry and exit; access to
terminations from front, rear, and top;
and accommodation for the unique
needs of optical fibre bend radius
limitation through enhanced patch
cord management devices and novel
internal fibre management components.
DESCRIPTION
nHolds three adapter panels
nSlide-design drawer
nHigh density ST, SC: 36 fibres
n1 rack unit
n4.5 kg
nDepth: 220 mm
ENCLOSURES
Rack Mount Fiber Cabinets Splicing
OR-FC01U-S
OR-FC02U-S
OR-FC03U-S
OR-FC04U-S
148
Fiber Splice Cabinets
Ortronics splice cabinets provide
interconnect or cross connect
facilities between horizontal and
backbone inside plant (ISP) or
outside plant (OSP) cables.
Each fiber cabinet offers high
density splicing with internal
fiber management accessories,
has optimized cable entry and
exit points, allows access to
terminations from front and rear,
and accommodates the unique
needs of optical fiber bend
radius limitation with novel
internal fiber management
components. Includes internal
fiber management clips.
PART NO.
DESCRIPTION
OR-FC01U-S
nHolds four (12 fiber) splice trays
nFront locking door
n1.75˝H, 1 rack unit, 15.65 lbs/7.10 kg
OR-FC02U-S
nHolds twelve (12 fiber) splice trays
nFront locking door
n3.5˝H, 2 rack units, 16.75 lbs/7.62 kg
OR-FC03U-S
nHolds twenty-two (12 fiber) splice trays
nFront locking door
n5.25˝H, 3 rack units, 18.50 lbs/8.40 kg
OR-FC04U-S
nHolds thirty-two (12 fiber) splice trays
nFront locking door
n7˝H, 4 rack units, 20.65 lbs/9.36 kg
NOTE: Splice trays sold separately.
ENCLOSURES
Rack Mount Fiber Cabinet Accessories
OR-70700107-00
D-Ring Cable
Management Straps
Ortronics® D-ring cable
management straps include a
D-ring for easy adjustments.
The straps have a hook and
loop type closure to secure
and administer cables without
damage. Package of 12.
OR-FCBL-002
Fiber Cabinet
Bend Limiting Clips
PART NO.
DESCRIPTION
OR-70700107-00
Black, .75˝ W x 12˝ L
NOTE: For additional styles and colors, see page 125.
PART NO.
DESCRIPTION
OR-FCBL-002
Pack of 2
Tray Lock Kit
PART NO.
DESCRIPTION
The tray lock kit can be easily
installed into any FC Series
cabinet tray to prevent it from
sliding forward or backwards.
OR-FCTL-001
Tray lock kit
Cable Fastening
Bracket
PART NO.
DESCRIPTION
OR-FCBR-001
For use with 1 rack unit cabinet, top position
OR-FCBR-002
For use with 2, 3, and 4 rack unit cabinet,
top position
OR-FCBR-003
For use with 2, 3, and 4 rack unit cabinet,
bottom position
Helps maintain minimum bend
radius and prevent micro bends
on sharp edges of front and rear
access points.
OR-FCTL-001
OR-FCBR-001
OR-FCBR-002
Provides robust backbone
cable retention for FC cabinets
when installing from above or
below cabinet. Accommodates
cable of all diameters; fastens
using flexible and strong
hook/loop straps.
NOTE: Two hook and loop straps included.
OR-FCBR-003
149
ENCLOSURES
Rack Mount Fiber Cabinet Accessories OptiMo® FC Series
OR-70800158
Internal Fiber
Management Clips
PART NO.
DESCRIPTION
OR-70800158
Kit of eight clips
PART NO.
DESCRIPTION
OR-FST2-F012
Fusion splice tray for 12 splices
OR-FST3-F048
Fusion splice tray for 48 splices*
Fiber management
clips installed
OR-FST2-F012
Splice Tray for
Fusion Splices
Transparent stackable design
with hinged cover and mylar
insert. Ideal for VFL verification.
* OR-FST3-F048 requires the use of OR-20500337 splice sleeves.
OR-FST3-F048
OR-20500043
OR-61500858
Splice Protection
OptiMo Breakout Kits
To be used with loose
tube cables.
150
PART NO.
DESCRIPTION
OR-20500043
Heat shrink sleeves, 40 mm,
package of 50, 3.0 mm
OR-20500337
Heat shrink sleeves, 40 mm,
package of 50, 2.5 mm
PART NO.
DESCRIPTION
OR-61500858
Breakout kit, 12 fiber
OR-61500868
Breakout kit, 6 fiber
ENCLOSURES
Rack Mount Fiber Cabinet Accessories OptiMo® FC Series
OR-ECDL001
Enclosure Door
Key Lock Kit
PART NO.
DESCRIPTION
OR-ECDL001
Enclosure door key lock kit
NOTE: Also compatible with EC series.
OR-ECDL002
Enclosure
Thumblatch Kit
PART NO.
DESCRIPTION
OR-ECDL002
Enclosure thumblatch kit
NOTE: Also compatible with EC series.
OR-FCWK-01
Enclosure Cable
Management Kit
PART NO.
DESCRIPTION
OR-FCWK-01
Enclosure cable management kit
Pack of 2 bend limiting clips plus edgeguards
151
ENCLOSURES
Rack Mount Fiber Cabinets 625 Series Pre-Loaded
The Ortronics® range of pre-loaded rack mount fiber enclosures (625 Series) provides a
comprehensive range ideally suited to both large and small installations. These enclosures
are offered in 1U and 2U as a standard product. 625 Series fiber cabinet products are
available with LC and SC adapters for single-mode or multimode applications.
n
n
n
n
n
n
Pre-loaded with fiber adapters for simple, quick installations
Slide-out drawer provides easy access for quick, reliable fiber termination
and fiber management
Bend limiters included to support minimum bend radius requirements ensuring low loss transmission*
Universal mounting (19˝ or 23˝) for most rack types with standard EIA hole pattern
Internal fiber management ring to provide proper bend radius and slack storage of excess fiber
Termination access from front, top, and rear for internal fiber termination and management
*2U pre-loaded
cabinets only.
Multimode, Face Recessed, 1 Rack Unit
OR-625MMC-12PF1RB
OR-625MMC-24PF1RB
Multimode, 2 Rack Units
OR-625MMC-96PL1B
OR-625MMC-48PD1B
PART NO.
DESCRIPTION
OR-625MMC-24PL1RB
12-LC duplex (24 fibers) multimode, beige
adapters, phosphor-bronze alignment sleeves
OR-625MMC-12PD1RB
6-SC duplex (12 fibers) multimode, beige
adapters, phosphor-bronze alignment sleeves
OR-625MMC-12PF1RB
12-SC simplex (12 fibers) multimode, beige
adapters, phosphor-bronze alignment sleeves
OR-625MMC-48PL1RB
24-LC duplex (48 fibers) multimode, beige
adapters, phosphor-bronze alignment sleeves
OR-625MMC-24PD1RB
12-SC duplex (24 fibers) multimode, beige
adapters, phosphor-bronze alignment sleeves
OR-625MMC-24PF1RB
24-SC simplex (24 fibers) multimode, beige
adapters, phosphor-bronze alignment sleeves
PART NO.
DESCRIPTION
OR-625MMC-96PL1B
48-LC duplex (96 fibers) multimode, beige
adapters, phosphor-bronze alignment sleeves
OR-625MMC-48PD1B
24-SC duplex (48 fibers) multimode, beige
adapters, phosphor-bronze alignment sleeves
PART NO.
DESCRIPTION
OR-625MMC-24PP1RB
12-LC duplex (24 fibers) single-mode, blue
adapters, ceramic alignment sleeves
OR-625MMC-12PE1RB
6-SC duplex (12 fibers) single-mode, blue
adapters, ceramic alignment sleeves
OR-625MMC-48PP1RB
24-LC duplex (48 fibers) single-mode, blue
adapters, ceramic alignment sleeves
OR-625MMC-24PE1RB
12-SC duplex (24 fibers) single-mode, blue
adapters, ceramic alignment sleeves
OR-625MMC-24PG1RB
24-SC simplex (24 fibers) single-mode, blue
adapters, ceramic alignment sleeves
PART NO.
DESCRIPTION
OR-625MMC-96PP1B
48-LC duplex (96 fibers) single-mode, blue
adapters, ceramic alignment sleeves
OR-625MMC-48PE1B
24-SC duplex (48 fibers) single-mode, blue
adapters, ceramic alignment sleeves
OR-625MMC-48PG1B
48-SC simplex (48 fibers) single-mode, blue
adapters, ceramic alignment sleeves
Single-mode, Face Recessed, 1 Rack Unit
OR-625MMC-12PE1RB
OR-625MMC-24PE1RB
Single-mode, 2 Rack Units
OR-625MMC-48PG1B
152
OR-625MMC-96PP1B
ENCLOSURES
OptiMo® Raised Floor Fiber Patch Panels
Ortronics® OptiMo raised floor patch
panel allows data center managers
and designers to take advantage
of under-utilized installation space
beneath the raised floor structure,
providing greater flexibility in structured
cabling design and maximizing usage
of premium data center floor space.
Specifically designed to be installed
in raised floor enclosures that are part
of the cabling pathways, the OptiMo
raised floor fiber patch panels address
the special bend radius and depth
requirements of fiber optic cabling
systems.
Features
Benefits
nFiber patch panel for underfloor
installation
nAllows data center manager to take
advantage of under-utilized space
beneath raised floor
n19˝ wide, 1 unit or 2 unit high
models available
nProvides the flexibility to suit
any installation
nDesigned for installation within
2´ x 2´ underfloor box with angled
mounting rails
n Horizontal patch panel orientation
n Removable/reusable labeling cards
nConvenient and accurate cabling
administration and record keeping
that is easily removed to provide
rear patching access
NEW
OR-RFPHD01U
High Density
Flush Mounting Rails
OR-RFPHD02U
OR-RFP01U
Flush Mounting Rails
PART NO.
DESCRIPTION
OR-RFPHD01U
n1 rack unit
nHolds four High Density adapter panels
(HDFP Series) or four Momentum 4 cassettes
nLC quad, 96 fibers
OR-RFPHD02U
n2 rack units
nHolds eight High Density adapter panels
(HDFP Series) or eight Momentum 4 cassettes
nLC quad, 192 fibers
PART NO.
DESCRIPTION
OR-RFP01U
n1 rack unit
nHolds three standard adapter panels
(OFP Series) or three Momentum 2 cassettes
nST, SC, FC capacity: 36 fibers
nMT-RJ, LC: 36 fibers
nLC quad: 72 fibers
OR-RFP02U
n2 rack units
nHolds six standard adapter panels
(OFP Series) or six Momentum 2 cassettes
nST, SC, FC capacity: 72 fibers
nMT-RJ, LC: 72 fibers
nLC quad: 144 fibers
OR-RFP02U
153
ENCLOSURES
OptiMo® Raised Floor Fiber Patch Panel Rails
NEW
High Density Angled Mounting Rails 45°
OR-RFPAHD01U
OR-RFPAHD02U
PART NO.
DESCRIPTION
OR-RFPAHD01U
n1 rack unit
nHolds four High Density adapter panels
(HDFP Series)
nHolds four Momentum 4 cassettes
nLC quad, 96 fibers
OR-RFPAHD02U
n2 rack units
nHolds eight High Density adapter panels
(HDFP Series)
nHolds eight Momentum 4 cassettes
nLC quad: 192 fibers
PART NO.
DESCRIPTION
OR-RFPA01U
n1 rack unit
nHolds three standard adapter panels
(OFP Series)
nHolds three Momentum 2 cassettes
nST, SC, FC: 18 fibers
nMT-RJ, LC: 36 fibers
nHigh density ST, SC: 36 fibers
nLC quad: 72 fibers
OR-RFPA02U
n2 rack units
nHolds six standard adapter panels
(OFP Series)
nHolds six Momentum 2 cassettes
nST, SC, FC: 36 fibers
nMT-RJ, LC: 72 fibers
nHigh density ST, SC: 72 fibers
nLC quad: 144 fibers
Angled Mounting Rails 45°
OR-RFPA01U
154
OR-RFPA02U
ENCLOSURES
OptiMo® Raised Floor Fiber Patch Panel Rails
NEW
High Density Angled Mounting Rails 56°– 60°
OR-RFPAHD01U-A
OR-RFPAHD02U-A
PART NO.
DESCRIPTION
OR-RFPAHD01U-A
n1 rack unit
nHolds four High Density adapter panels
(HDFP Series)
nHolds four Momentum 4 cassettes
nLC quad, 96 fibers
OR-RFPAHD02U-A
n2 rack units
nHolds eight High Density adapter panels
(HDFP Series)
nHolds eight Momentum 4 cassettes
nLC quad: 192 fibers
NOTE: Please contact raised floor enclosure manufacturer to verify rail angle.
NOTE: May require stand-off bracket kit when using Momentum cassettes.
Angled Mounting Rails 56°– 60°
OR-RFPA01U-A
OR-RFPA02U-A
PART NO.
DESCRIPTION
OR-RFPA01U-A
n1 rack unit
nHolds three standard adapter panels
(OFP Series)
nHolds three Momentum 2 cassettes
nST, SC, FC: 18 fibers
nMT-RJ, LC: 36 fibers
nHigh density ST, SC: 36 fibers
nLC quad: 72 fibers
OR-RFPA02U-A
n2 rack units
nHolds six standard adapter panels
(OFP Series)
nHolds six Momentum 2 cassettes
nST, SC, FC: 36 fibers
nMT-RJ, LC: 72 fibers
nHigh density ST, SC: 72 fibers
nLC quad: 144 fibers
NOTE: Please contact raised floor enclosure manufacturer to verify rail angle.
NOTE: May require stand-off bracket kit when using Momentum cassettes.
OR-60400968
Angled Stand-off
Bracket Kit
PART NO.
DESCRIPTION
OR-60400968
Kit used with raised floor enclosure
Kit used with raised floor
enclosure with 56°-60° mounting
rails. These stand-off brackets
may be needed to extend the
mounting surface of the raised
floor enclosure to accommodate
the depth limitations of some
2´ x 2´ raised floor enclosures.
Includes left and right bracket.
155
ENCLOSURES
Surface Mount Cabinets
Ortronics® 615 Series surface mount fiber cabinets secure, protect, and organize
up to
384 single-mode or multimode optical terminations.
n Standard OFP Series adapter panels snap in for easy installation, removal, and
expansion
n Surface/wall mountable is ideal for space limited installations
n Top/bottom cable entry simplifies installations, moves, adds, and changes
n Internal cable management included—facilitates organization and clean installations
n Open designs with available latch are economical and easily accessible
NOTE: Contact Ortronics sales for cassette compatibility.
615 Series Surface Mount Fiber Cabinets
OR-615SMFC-12P
OR-615SMFC-LX-12P
PART NO.
DESCRIPTION
n Patch cabinet: Holds two adapter panels
n ST, SC, FC: 12 fibers
OR-615SMFC-12P
n ST Duplex, SC: 24 fibers
n MT-RJ, LC: 24 fibers
n LC quad: 48 fibers
nOpen access, 10˝ x 9˝ x 3.5˝,
latching door, 5.5 lbs
n Patch cabinet: Holds two adapter panels
OR-615SMFC-24P
n ST, SC, FC: 12 fibers
OR-615SMFC-24P/S
OR-615SMFC-LX-12P
n ST Duplex, SC: 24 fibers
n MT-RJ, LC: 24 fibers
n LC quad: 48 fibers
n 10˝ x 9˝ x 3.5˝, locking door, 6.0 lbs
n Patch cabinet: Holds four adapter panels
n ST, SC, FC: 24 fibers
OR-615SMFC-24P
n ST Duplex, SC: 48 fibers
n MT-RJ, LC: 48 fibers
n LC quad: 96 fibers
OR-615SMFC-48P
n 12˝ x 12˝ x 3.5˝, 9.0 lbs
OR-615SMFC-48P/S
nPatch/splice cabinet: Holds four
adapter panels
n ST, SC, FC: 24 fibers
OR-615SMFC-24P/S
n ST Duplex, SC: 48 fibers
n MT-RJ, LC: 48 fibers
n LC quad: 96 fibers
nHolds four, 12-fiber, 7˝ splice trays
(holds up to 48 splices)
n 12˝ x 16˝ x 3.5˝, 9.0 lbs
n Patch cabinet: Holds eight adapter panels
OR-615SMFC-96P
n ST, SC, FC: 48 fibers
OR-615SMFC-48P
n ST Duplex, SC: 96 fibers
n MT-RJ, LC: 96 fibers
n LC quad: 192 fibers
n 22˝ x 12˝ x 3.5˝, 15.0 lbs
OR-615SMFC-48P/S
nPatch/splice cabinet: Holds eight adapter panels,
same chassis as OR-615SMFC-48P
nHolds four 12-fiber splice trays,
7˝ splice trays (up to 48 fibers)
n 22˝ x 12˝ x 3.5˝, 15.0 lbs
n Patch cabinet: Holds 16 adapter panels
n ST, SC, FC: 96 fibers
OR-615SMFC-96P
n ST Duplex, SC: 192 fibers
n MT-RJ, LC: 192 fibers
n LC quad: 384 fibers
n 16.75˝ x 13.5˝ x 7˝, 20 lbs
156
ENCLOSURES
Surface Mount Cabinet Accessories
OR-20500043
OR-62600002
Splice Protection
7˝ Splice Trays
PART NO.
DESCRIPTION
OR-20500043
Heat shrink sleeves, 40 mm,
package of 50, 3.0 mm
PART NO.
DESCRIPTION
OR-62600002
Mechanical, 12 fibers*
OR-62600003
Fusion, 12 fibers*
*For use with surface mount cabinet only.
OR-62600003
OR-61500858
OptiMo® Breakout Kits
PART NO.
DESCRIPTION
To be used with loose tube cables.
OR-61500858
Breakout kit, 12 fiber
OR-61500868
Breakout kit, 6 fiber
157
CASSETTES
Ideal for data centers and SANs, the Momentum® series is a modular, pre-terminated cabling system that integrates optical cassettes with advanced fiber cable in the backbone. It’s simple to use, fast to install, and the connectors are factory terminated and tested. The cassettes are supported by a range of rack-mount and underfloor
patch panels for convenient installation.
It’s the System That Counts
The performance of a fiber optic cabling system needs to be viewed from a system
standpoint and not just as an assembly of individual components.
The optical loss performance of a modular cassette-based MTP*/MPO link is primarily
affected by connector end-face polishing and connector end preparation at the factory.
Therefore, it is essential that the MTP/MPO backbone cables and patch cords are
pre-pared with a high-quality process that complements the cassette manufacturing
process, otherwise, the expected end-to-end link insertion loss performance will not
be realized.
* MTP is a registered trademark of US Conec.
158
Simply put, to achieve improved
performance you need high or
premium cassettes with matching
backbone and patch cables.
CASSETTES
Momentum® Modular Pre-Terminated Systems
Patch
Cords
Momentum
Pre-Terminated
Cassette
MTP to MTP
Backbone cable
Momentum
Pre-Terminated
Cassette
Patch
Cords
PREMIUM PERFORMANCE SYSTEM
Patch Cords/Pigtails
0.15 dB max
Cassettes
0.50 dB max
MTP-MTP
Backbone Cables
0.35 dB max
Cassettes
0.50 dB max
Patch Cords/Pigtails
0.15 dB max
P3 Series
M4LCQ24-50EA3A1
M2LCQ24-50E3A1
12F loose tube cable,
MTP 0.35 dB Loss
M4LCQ24-50EA3A1
M2LCQ24-50E3A1
P3 Series
HIGH PERFORMANCE SYSTEM
Patch Cords/Pigtails
0.15 dB max
Cassettes
0.75 dB max
MTP-MTP
Backbone Cables
0.50 dB max
Cassettes
0.75 dB max
Patch Cords/Pigtails
0.15 dB max
P3 Series
M4LCQ24-50E
M2LCQ24-50E
12F loose tube cable,
MTP 0.50 dB Loss
M4LCQ24-50E
M2LCQ24-50E
P3 Series
0.15 dB Loss
STANDARD PERFORMANCE SYSTEM
Patch Cords/Pigtails
Cassettes
1.25 dB max
MTP-MTP
Backbone Cables
0.75 dB max
Cassettes
1.25 dB max
Patch Cords/Pigtails
P1 Series
0.50 dB max MM
0.30 dB max SM
M4LCQ24-50E
M2LCQ24-50E
M2LCD12-50E
M2SCD12-50E
also available in
single-mode and 62.5
12F-72F loose
tube cable,
MTP 0.50dB Loss
M4LCQ24-50E
M2LCQ24-50E
M2LCD12-50E
M2SCD12-50E
also available in
single-mode and 62.5
P1 Series
0.50 dB max MM
0.30 dB max SM
159
CASSETTES
Momentum® 4 Modular Pre-Terminated Systems
NEW
OR-M4LCQ24-50EA3A1
Momentum 4 Cassettes
Momentum 4 modular fiber optic
pre-terminated cassettes combine
the plug-and-play functionality of
our standard cassette with the high
density footprint accommodating
96 fibers in one rack unit.
OR-M4LCQ24-09
OR-M4LCQ24-62
PART NO.
DESCRIPTION
OR-M4LCQ24-50EA3A1
LC Quad, 24 fiber, 50-micron LOMF*,
2 MTP**(M), premium performance,
single unit
OR-M4LCQ24-50E
LC Quad, 24 fiber, 50-micron LOMF*,
2 MTP(M), high performance, single unit
LC Quad, 24 fiber, single-mode,
OR-M4LCQ24-09
The Momentum 4 High Density
2 MTP(M), high performance, single unit
Cassette fully supports the latest
LC Quad, 24 fiber, 62.5-micron multimode,
networking standards through
OR-M4LCQ24-62
2 MTP(M), high performance, single unit
10 Gb/s and beyond. It is available
in three performance levels for Laser * Effective modal bandwidth 4900 MHz-km @ 850nm.
Optimized Multimode 50 micron fiber. ** MTP is a registered trademark of US Conec.
Each cassette has a data label with
insertion loss value for each port.
n
n
n
n
n
Premium Performance cassette/
mated pair insertion loss: 0.50dB
High Performance cassettes/
mated pair insertion loss: 0.75dB
Standard Performance cassette/
mated pair insertion loss: 1.25dB
1.05dB total insertion loss for
single-mode system
Insertion loss value for each port
printed on adhesive data label
CASSETTES
Momentum 2 Modular Pre-Terminated Systems
OR-M2LCQ24-50E
OR-M2LCD12-50E
OR-M2LCD12-09
160
Momentum 2 Cassettes
Momentum 2 modular fiber optic
pre-terminated cassettes provide
the fastest method of structured
cabling deployment: plug it in
and you’re ready to go. Factoryterminated/tested cassettes
guarantee field performance.
Full support of today’s most
rigorous transmission technologies
up through 10 Gb/s.
n 1.05 dB total insertion loss for
single-mode
n Single unit footprint for space
savings in patch panels
and cabinets.
n Data label printed with insertion
loss value for each port adhered
to the cassette housing.
PART NO.
DESCRIPTION
OR-M2LCQ24-50E3A1
LC Quad, 24 fiber, 50-micron LOMF*,
2 MTP(M), premium performance, single unit
OR-M2LCQ24-50E
LC Quad, 24 fiber, 50-micron LOMF*,
2 MTP(M), high performance, single unit
OR-M2LCQ24-09
LC Quad, 24 fiber, single-mode,
2 MTP(M), high performance, single unit
OR-M2LCD12-50E
LC Quad, 24 fiber, 62.5-micron multimode,
1 MTP(M), high performance, single unit
OR-M2LCD12-09
LC Duplex, 12 fiber, single-mode,
1 MTP(M), high performance, single unit
OR-M2SCD12-50E
SC Duplex, 12 fiber, 50-micron LOMF*,
1 MTP(M), high performance, single unit
OR-M2SCD12-09
SC Duplex, 12 fiber, single-mode,
1 MTP(M), high performance, single unit
*Effective Modal Bandwidth: 4900 MHz-km @ 850nm.
NOTE: Other cassette fiber types are available. Contact Ortronics sales.
ADAPTER PANELS
The Ortronics® OptiMo® OFP and HDFP series adapter panels are used with our popular FC Series modular fiber cabinets,
offering great flexibility in structured cabling design. Front-removable adapter panels are available with LC, SC, ST, and MT-RJ
adapters and feature options ideal for both single-mode and multimode applications. They are held securely in place with plunger/
grommet fasteners.
Where applicable, the adapters used (LC, SC, and ST) contain application specific alignment sleeves to ensure optimal
performance in conjunction with the economic constraints of network design.
For common multimode applications, phosphor-bronze (metal) alignment sleeves are used. With the increasing demands of
high bandwidth multimode systems, like those containing laser-optimized multimode fiber, ceramic alignment sleeves are
recommended. Finally, to ensure dependable transmission, ceramic sleeves are always used in single-mode applications.
NEW
High Density Adapter Panels
OR-HDFP-MPA72LA
OR-HDFP-LCQ24LC
OR-HDFP-MPA72CA
OR-HDFP-LCQ24AC
OR-HDFP-MPA72MA
OR-HDFP-LCQ24MB
OR-HDFP-BLANK
PART NO.
DESCRIPTION
OR-HDFP-MPA72LA
HD, 6-MPO adapter panel, feed-through,
multimode, aqua adapters, Type A*
OR-HDFP-MPA72CA
HD, 6-MPO adapter panel, feed-through,
single-mode, green adapters, Type A*
OR-HDFP-MPA72MA
HD, 6-MPO adapter panel, feed-through,
multimode, beige adapters, Type A*
OR-HDFP-LCQ24LC
HD, 6-LC Quad (24 fiber) adapter panel, multimode, aqua adapters, ceramic alignment sleeves
OR-HDFP-LCQ24AC
HD, 6-LC Quad (24 fiber) adapter panel, singlemode, blue adapters, ceramic alignment sleeves
HD, 6-LC Quad (24 fiber) adapter panel,
OR-HDFP-LCQ24MB multimode, beige adapters, phosphor-bronze
alignment sleeves
OR-HDFP-BLANK
HD, Blank Panel, black
*Type A MPO adapters are Key Up/Key Down.
Adapter Panels
OR-OFP-MPA96LA
OR-OFP-MPA72LA
OR-OFP-LCQ24LC
OR-OFP-LCD12LC
OR-OFP-MPA96CA
OR-OFP-MPA96MA
PART NO.
DESCRIPTION
OR-OFP-MPA96LA
8-MPO adapter panel, feed-through,
multimode, aqua adapters, Type A*
OR-OFP-MPA96CA
8-MPO adapter panel, feed-through,
single-mode, green adapters, Type A*
OR-OFP-MPA96MA
8-MPO adapter panel, feed-through,
multimode, beige adapters, Type A*
OR-OFP-MPA72LA
6-MPO adapter panel, feed-through,
multimode, aqua adapters, Type A*
OR-OFP-MPA72CA
6-MPO adapter panel, feed-through,
single-mode, green adapters, Type A*
OR-OFP-MPA72MA
6-MPO adapter panel, feed-through,
multimode, beige adapters, Type A*
OR-OFP-LCQ24LC
6-LC Quad (24 fiber) adapter panel, multimode,
aqua adapters, ceramic alignment sleeves
OR-OFP-LCQ24AC
6-LC Quad (24 fiber) adapter panel, single-mode,
blue adapters, ceramic alignment sleeves
OR-OFP-LCQ24MB
6-LC Quad (24 fiber) adapter panel, multimode,
beige adapters, phosphor-bronze alignment sleeves
OR-OFP-LCD12LC
6-LC Duplex (12 fiber) adapter panel, multimode,
aqua adapters, ceramic alignment sleeves
OR-OFP-LCD12AC
6-LC Duplex (12 fiber) adapter panel, singlemode, blue adapters, ceramic alignment sleeves
*Type A MPO adapters are Key Up/Key Down. OR-OFP-LCD12MB
6-LC Duplex (12 fiber) adapter panel, multimode,
beige adapters, phosphor-bronze alignment sleeves
OR-OFP-MPA72CA
OR-OFP-LCQ24AC
OR-OFP-LCD12AC
OR-OFP-MPA72MA
OR-OFP-LCQ24MB
OR-OFP-LCD12MB
161
ADAPTER PANELS
OR-OFP-SCD06MB
OR-OFP-SCD08MB
OR-OFP-SCD12MB
OR-OFP-SCS06MB
OR-OFP-MTD12MA
OR-OFP-STS06NB
OR-OFP-STD08AC
OR-OFP-STD12AC
OR-OFP-SCD06AC
OR-OFP-SCD08AC
OR-OFP-SCD12AC
OR-OFP-SCS06AC
OR-OFP-MTD12AA
OR-OFP-STS06NC
OR-OFP-STD08LC
OR-OFP-STD12LC
OR-OFP-SCD06LC
OR-OFP-SCD08LC
OR-OFP-SCD12LC
PART NO.
DESCRIPTION
OR-OFP-SCD06MB
3-SC duplex (6 fibers) multimode, beige
adapters,phosphor-bronze alignment sleeves*
OR-OFP-SCD06AC
3-SC duplex (6 fibers) single-mode, blue
adapters, ceramic alignment sleeves*
OR-OFP-SCD06LC
3-SC duplex (6 fibers) multimode, aqua
adapters, ceramic alignment sleeves*
OR-OFP-SCD08MB
4-SC duplex (8 fibers) multimode, beige
adapters, phosphor-bronze alignment sleeves
OR-OFP-SCD08AC
4-SC duplex (8 fibers) single-mode, blue
adapters, ceramic alignment sleeves
OR-OFP-SCD08LC
4-SC duplex (8 fibers) multimode, aqua
adapters, ceramic alignment sleeves
OR-OFP-SCD12MB
6-SC duplex (12 fibers) multimode, beige
adapters, phosphor-bronze alignment sleeves
OR-OFP-SCD12AC
6-SC duplex (12 fibers) single-mode, blue
adapters, ceramic alignment sleeves
OR-OFP-SCD12LC
6-SC duplex (12 fibers) multimode, aqua
adapters, ceramic alignment sleeves
OR-OFP-SCS06MB
6-SC simplex (6 fibers) multimode, beige
adapters, phosphor-bronze alignment sleeves
OR-OFP-SCS06AC
6-SC simplex (6 fibers) single-mode, blue
adapters, ceramic alignment sleeves
OR-OFP-SCS06LC
6-SC simplex (6 fibers) multimode, aqua
adapters, ceramic alignment sleeves
OR-OFP-MTD12MA
6-MT-RJ duplex (12 fibers) multimode,
beige adapters
OR-OFP-MTD12AA
6-MT-RJ duplex (12 fibers) single-mode,
blue adapters
OR-OFP-MTD12LA
6-MT-RJ duplex (12 fibers) multimode,
aqua adapters
OR-OFP-STS06NB
6-ST simplex (6 fibers) multimode adapters,
phosphor-bronze alignment sleeves,
metal adapters
OR-OFP-STS06NC
6-ST simplex (6 fibers) single-mode,
ceramic alignment sleeves, metal adapters
OR-OFP-STD08MB
4-ST duplex (8 fibers) multimode adapters,
phosphor-bronze alignment sleeves,
beige adapters
OR-OFP-STD08AC
4-ST duplex (8 fibers) single-mode adapters,
ceramic alignment sleeves, blue adapters
OR-OFP-STD08LC
4-ST duplex (8 fibers) multimode adapters,
ceramic alignment sleeves, aqua adapters
OR-OFP-STD12MB
6-ST duplex (12 fibers) multimode adapters,
phosphor-bronze alignment sleeves,
beige adapters
OR-OFP-STD12AC
6-ST duplex (12 fibers) single-mode adapters,
ceramic alignment sleeves, blue adapters
OR-OFP-STD12LC
6-ST duplex (12 fibers) multimode adapters,
ceramic alignment sleeve, aqua adapters
OR-OFP-BLANK
Blank panel, black
OR-OFP-SCS06LC
OR-OFP-MTD12LA
OR-OFP-STD08MB
OR-OFP-STD12MB
OR-OFP-BLANK
*Designation strip kit provided for accurate port identification.
162
PATCH CORDS
SpaceSaver Fiber Optic Cable Assemblies
Ideal for Data Center Applications
The SpaceSaver line of duplex fiber optic patch cords features a single 2.4 mm round jacketed cable. These patch cords are
available with duplex LC connectors at each end in either A-B or A-A types per the TIA 568 standard. These patch cords are ideal
for high
density installations common in data centers and SANs optimizing the available vertical and horizontal cable routing spaces.
NOTE: For other lengths and configurations, consult the Ortronics sales department.
A–B POLARITY
A
B
B
fig. 1
A–A POLARITY
A
A
B
B
fig. 2
A
SpaceSaver Duplex Fiber Optic Patch Cords for Premium & High Performance Systems
OR-P3DF6LPAZAZ001M
OptiMo Laser Optimized (50/125) PC/OFNP (A-B*)
OptiMo Laser Optimized (50/125) PC/OFNP (A-A**)
PART NO.
DESCRIPTION
PART NO.
DESCRIPTION
OR-P3DF6LPAZAZ001M
1 meter
OR-P3RF6LPAZAZ001M
1 meter
OR-P3DF6LPAZAZ002M
2 meters
OR-P3RF6LPAZAZ002M
2 meters
OR-P3DF6LPAZAZ003M
3 meters
OR-P3RF6LPAZAZ003M
3 meters
NOTE: *A-B patch cords reverse the fiber positions (fig. 1), **A-A patch cords do not reverse the fiber (fig. 2).
SpaceSaver Duplex Fiber Optic Patch Cords for Standard Performance Systems
OR-P1DF6LPAZAZ001M
OR-P1RC6IPUZUZ001M
OR-P1DA6BPAZAZ001M
OptiMo Laser Optimized (50/125) PC/OFNP (A-B*)
OptiMo Laser Optimized (50/125) PC/OFNP (A-A*)
PART NO.
DESCRIPTION
PART NO.
DESCRIPTION
OR-P1DF6LPAZAZ001M
1 meter
OR-P1RF6LPAZAZ001M
1 meter
OR-P1DF6LPAZAZ002M
2 meters
OR-P1RF6LPAZAZ002M
2 meters
OR-P1DF6LPAZAZ003M
3 meters
OR-P1RF6LPAZAZ003M
3 meters
OptiMo Single-mode UPC/OFNP (A-B*)
OptiMo Single-mode UPC/OFNP (A-A*)
PART NO.
DESCRIPTION
PART NO.
DESCRIPTION
OR-P1DC6IPUZUZ001M
1 meter
OR-P1RC6IPUZUZ001M
1 meter
OR-P1DC6IPUZUZ002M
2 meters
OR-P1RC6IPUZUZ002M
2 meters
OR-P1DC6IPUZUZ003M
3 meters
OR-P1RC6IPUZUZ003M
3 meters
OptiMo (62.5/125) PC/OFNP (A-B*)
OptiMo (62.5/125) PC/OFNP (A-A*)
PART NO.
DESCRIPTION
PART NO.
DESCRIPTION
OR-P1DA6BPAZAZ001M
1 meter
OR-P1RA6BPAZAZ001M
1 meter
OR-P1DA6BPAZAZ002M
2 meters
OR-P1RA6BPAZAZ002M
2 meters
OR-P1DA6BPAZAZ003M
3 meters
OR-P1RA6BPAZAZ003M
3 meters
163
PATCH CORDS
Fiber Optic Cable Assemblies
NOTE: Duplex zipcord jumpers include removable duplexing clips (unassembled in the bag).
Duplex Fiber Optic Patch Cords for Premium & High Performance Systems
OptiMo® LOMF (50/125)
PC/OFNR, 2mm Zip Cord
OR-P3DF2LRGZGZ001M
OR-P3DF2LRFZFZ001M
OR-P3DF2LRFZGZ001M
164
DUPLEX,
LC-PC TO LC-PC
LENGTH
OR-P3DF2LRGZGZ001M
1 meter
OR-P3DF2LRGZGZ002M
2 meters
OR-P3DF2LRGZGZ003M
3 meters
DUPLEX,
SC-PC TO SC-PC
LENGTH
OR-P3DF2LRFZFZ001M
1 meter
OR-P3DF2LRFZFZ002M
2 meters
OR-P3DF2LRFZFZ003M
3 meters
DUPLEX,
SC-PC TO LC-PC
LENGTH
OR-P3DF2LRFZGZ001M
1 meter
OR-P3DF2LRFZGZ002M
2 meters
OR-P3DF2LRFZGZ003M
3 meters
PATCH CORDS
Fiber Optic Cable Assemblies
NOTE: Duplex zipcord jumpers include removable duplexing clips (unassembled in the bag).
Duplex Fiber Optic Patch Cords for Standard Performance Systems
OptiMo® LOMF (50/125)
PC/OFNR, 2mm Zip Cord
OR-P1DF2LRGZGZ001M
OR-P1DF2LRFZFZ001M
OR-P1DF2LRFZGZ001M
OR-P1DC2IRSZSZ001M
OR-P1DC2IRRZRZ001M
OR-P1DC2IRRZSZ001M
DUPLEX,
LC-PC TO LC-PC
OptiMo Single-mode
UPC/OFNR, 2mm Zip Cord
LENGTH
DUPLEX,
LC-UPC TO LC-UPC
LENGTH
OR-P1DF2LRGZGZ001M
1 meter
OR-P1DC2IRSZSZ001M
1 meter
OR-P1DF2LRGZGZ002M
2 meters
OR-P1DC2IRSZSZ002M
2 meters
OR-P1DF2LRGZGZ003M
3 meters
OR-P1DC2IRSZSZ003M
3 meters
DUPLEX,
SC-PC TO SC-PC
LENGTH
DUPLEX,
SC-UPC TO SC-UPC
LENGTH
OR-P1DF2LRFZFZ001M
1 meter
OR-P1DC2IRRZRZ001M
1 meter
OR-P1DF2LRFZFZ002M
2 meters
OR-P1DC2IRRZRZ002M
2 meters
OR-P1DF2LRFZFZ003M
3 meters
OR-P1DC2IRRZRZ003M
3 meters
DUPLEX,
SC-PC TO LC-PC
LENGTH
DUPLEX,
SC-UPC TO LC-UPC
LENGTH
OR-P1DF2LRFZGZ001M
1 meter
OR-P1DC2IRRZSZ001M
1 meter
OR-P1DF2LRFZGZ002M
2 meters
OR-P1DC2IRRZSZ002M
2 meters
OR-P1DF2LRFZGZ003M
3 meters
OR-P1DC2IRRZSZ003M
3 meters
Duplex Fiber Optic Patch Cords for Standard Performance Systems
OptiMo Multimode (62.5/125)
PC/OFNR, 2mm Zip Cord
OR-P1DA2BRGZGZ001M
OR-P1DA2BRFZFZ001M
OR-P1DA2BRFZGZ001M
DUPLEX,
LC-PC TO LC-PC
LENGTH
OR-P1DA2BRGZGZ001M
1 meter
OR-P1DA2BRGZGZ002M
2 meters
OR-P1DA2BRGZGZ003M
3 meters
DUPLEX,
SC-PC TO SC-PC
LENGTH
OR-P1DA2BRFZFZ001M
1 meter
OR-P1DA2BRFZFZ002M
2 meters
OR-P1DA2BRFZFZ003M
3 meters
DUPLEX,
SC-PC TO LC-PC
LENGTH
OR-P1DA2BRFZGZ001M
1 meter
OR-P1DA2BRFZGZ002M
2 meters
OR-P1DA2BRFZGZ003M
3 meters
165
PATCH CORDS
Fiber Optic Cable Assemblies Low Smoke Zero Halogen
NOTE: Duplex zipcord jumpers include removable duplexing clips (unassembled in the bag).
Duplex Fiber Optic Patch Cords for Standard Performance Systems
OptiMo® LOMF (50/125)
PC/LSZH, 2mm Zip Cord
OR-P1DF2LLGZGZ001M
OR-P1DF2LLFZFZ001M
OR-P1DF2LLFZGZ001M
OR-P1DC2ILSZSZ001M
OR-P1DC2ILRZRZ001M
OR-P1DC2ILRZSZ001M
DUPLEX,
LC-PC TO LC-PC
OptiMo Single-mode
UPC/LSZH, 2mm Zip Cord
LENGTH
DUPLEX,
LC-UPC TO LC-UPC
LENGTH
OR-P1DF2LLGZGZ001M
1 meter
OR-P1DC2ILSZSZ001M
1 meter
OR-P1DF2LLGZGZ002M
2 meters
OR-P1DC2ILSZSZ002M
2 meters
OR-P1DF2LLGZGZ003M
3 meters
OR-P1DC2ILSZSZ003M
3 meters
DUPLEX,
SC-PC TO SC-PC
LENGTH
DUPLEX,
SC-UPC TO SC-UPC
LENGTH
OR-P1DF2LLFZFZ001M
1 meter
OR-P1DC2ILRZRZ001M
1 meter
OR-P1DF2LLFZFZ002M
2 meters
OR-P1DC2ILRZRZ002M
2 meters
OR-P1DF2LLFZFZ003M
3 meters
OR-P1DC2ILRZRZ003M
3 meters
DUPLEX,
SC-PC TO LC-PC
LENGTH
DUPLEX,
SC-UPC TO LC-UPC
LENGTH
OR-P1DF2LLFZGZ001M
1 meter
OR-P1DC2ILRZSZ001M
1 meter
OR-P1DF2LLFZGZ002M
2 meters
OR-P1DC2ILRZSZ002M
2 meters
OR-P1DF2LLFZGZ003M
3 meters
OR-P1DC2ILRZSZ003M
3 meters
Duplex Fiber Optic Patch Cords for Standard Performance Systems
OptiMo Multimode (62.5/125)
PC/LSZH, 2mm Zip Cord
OR-P1DA2BLGZGZ001M
OR-P1DA2BLFZFZ001M
OR-P1DA2BLFZGZ001M
166
DUPLEX,
LC-PC TO LC-PC
LENGTH
OR-P1DA2BLGZGZ001M
1 meter
OR-P1DA2BLGZGZ002M
2 meters
OR-P1DA2BLGZGZ003M
3 meters
DUPLEX,
SC-PC TO SC-PC
LENGTH
OR-P1DA2BLFZFZ001M
1 meter
OR-P1DA2BLFZFZ002M
2 meters
OR-P1DA2BLFZFZ003M
3 meters
DUPLEX,
SC-PC TO LC-PC
LENGTH
OR-P1DA2BLFZGZ001M
1 meter
OR-P1DA2BLFZGZ002M
2 meters
OR-P1DA2BLFZGZ003M
3 meters
PATCH CORDS
Fiber Optic Cable Assemblies for Premium & High Performance Systems
NOTE: All pigtail products include a 1 meter breakout section consisting of 900 µm buffered fiber with terminated ends. LC, SC and ST cable assemblies have
connectors with ceramic ferrules. For other lengths and configurations, consult the Ortronics sales department.
Single Connector Pigtails
OR-P3PF9FRFZZZ001M
OR-P3PF9FRGZZZ001M
Six Connector Pigtails
OR-P3SF4ZRFZZZ001M
OR-P3SF4ZRGZZZ001M
Twelve Connector Pigtails
OR-P3TF4ZRFZZZ001M
OR-P3TF4ZRGZZZ001M
OptiMo Laser Optimized
(50/125) PC/OFNR
PREMIUM PERFORMANCE
1 FIBER CONNECTOR
PIGTAIL, SC-PC, 50 LOMF
LENGTH
OR-P3PF9FRFZZZ001M
1 meter
OR-P3PF9FRFZZZ002M
2 meters
PREMIUM PERFORMANCE
1 FIBER CONNECTOR
PIGTAIL, LC-PC, 50 LOMF
LENGTH
OR-P3PF9FRGZZZ001M
1 meter
OR-P3PF9FRGZZZ002M
2 meters
OptiMo Laser Optimized
(50/125) PC/OFNR
PREMIUM PERFORMANCE
6 FIBER CONNECTOR
PIGTAIL, SC-PC, 50 LOMF
LENGTH
OR-P3SF4ZRFZZZ001M
1 meter
OR-P3SF4ZRFZZZ002M
2 meters
PREMIUM PERFORMANCE
6 FIBER CONNECTOR
PIGTAIL, LC-PC, 50 LOMF
LENGTH
OR-P3SF4ZRGZZZ001M
1 meter
OR-P3SF4ZRGZZZ002M
2 meters
OptiMo Laser Optimized
(50/125) PC/OFNR
PREMIUM PERFORMANCE
12 FIBER CONNECTOR
PIGTAIL, SC-PC, 50 LOMF
LENGTH
OR-P3TF4ZRFZZZ001M
1 meter
OR-P3TF4ZRFZZZ002M
2 meters
PREMIUM PERFORMANCE
12 FIBER CONNECTOR
PIGTAIL, LC-PC, 50 LOMF
LENGTH
OR-P3TF4ZRGZZZ001M
1 meter
OR-P3TF4ZRGZZZ002M
2 meters
167
PATCH CORDS
Fiber Optic Cable Assemblies for Standard Performance Systems
NOTE: All pigtail products include a 1 meter breakout section consisting of 900 µm buffered fiber with terminated ends. LC, SC and ST cable assemblies have
connectors with ceramic ferrules. For other lengths and configurations, consult the Ortronics sales department.
Single Connector Pigtails
OR-P1PF9FRFZZZ001M
OR-P1PF9FRGZZZ001M
OR-P1PC9FRRZZZ001M
OR-P1PC9FRSZZZ001M
OptiMo® Multimode
(62.5/125) PC/OFNR
OptiMo Laser Optimized
(50/125) PC/OFNR
OptiMo Single-mode
UPC/OFNR
1 CONNECTOR
PIGTAIL, SC-UPC
1 FIBER
OR-P1PC9FRRZZZ001M
1 meter
1 CONNECTOR
PIGTAIL, SC-PC
1 FIBER
1 CONNECTOR
PIGTAIL, SC-PC
OR-P1PA9FRFZZZ001M
1 meter
OR-P1PF9FRFZZZ001M 1 meter
OR-P1PA9FRFZZZ002M
2 meters OR-P1PF9FRFZZZ002M 2 meters OR-P1PC9FRRZZZ002M
1 CONNECTOR
PIGTAIL, LC-PC
1 FIBER
OR-P1PA9FRGZZZ001M 1 meter
1 CONNECTOR
PIGTAIL, LC-PC
1 FIBER
1 FIBER
OR-P1PF9FRGZZZ001M 1 meter
1 CONNECTOR
PIGTAIL, LC-UPC
1 FIBER
OR-P1PC9FRSZZZ001M
1 meter
OR-P1PA9FRGZZZ002M 2 meters OR-P1PF9FRGZZZ002M 2 meters OR-P1PC9FRSZZZ002M
Six Connector Pigtails
OR-P1SF4ZRFZZZ001M
OR-P1SF4ZRGZZZ001M
OR-P1SC4ZRRZZZ001M
OR-P1SC4ZRSZZZ001M
Twelve Connector Pigtails
OR-P1TF4ZRFZZZ001M
OR-P1TF4ZRGZZZ001M
168
OR-P1TC4ZRRZZZ001M
OR-P1TC4ZRSZZZ001M
OptiMo Multimode
(62.5/125) PC/OFNR
6 CONNECTOR
PIGTAIL, SC-PC
6 FIBER
OptiMo Laser Optimized
(50/125) PC/OFNR
OptiMo Single-mode
UPC/OFNR
6 CONNECTOR
PIGTAIL, SC-PC
6 CONNECTOR
PIGTAIL, SC-UPC
6 FIBER
2 meters
2 meters
6 FIBER
OR-P1SA4ZRFZZZ001M 1 meter
OR-P1SF4ZRFZZZ001M 1 meter
OR-P1SC4ZRRZZZ001M 1 meter
OR-P1SA4ZRFZZZ002M 2 meters
OR-P1SF4ZRFZZZ002M 2 meters
OR-P1SC4ZRRZZZ002M 2 meters
6 CONNECTOR
PIGTAIL, LC-PC
6 CONNECTOR
PIGTAIL, LC-PC
6 CONNECTOR
PIGTAIL, LC-UPC
6 FIBER
6 FIBER
6 FIBER
OR-P1SA4ZRGZZZ001M 1 meter
OR-P1SF4ZRGZZZ001M 1 meter
OR-P1SC4ZRSZZZ001M 1 meter
OR-P1SA4ZRGZZZ002M 2 meters
OR-P1SF4ZRGZZZ002M 2 meters
OR-P1SC4ZRSZZZ002M 2 meters
OptiMo Laser Optimized
(50/125) PC/OFNR
OptiMo Single-mode
UPC/OFNR
OptiMo Multimode
(62.5/125) PC/OFNR
12 CONNECTOR
PIGTAIL, SC-PC
12 CONNECTOR
12 FIBER PIGTAIL, SC-PC
12 CONNECTOR
12 FIBER PIGTAIL, SC-UPC
12 FIBER
OR-P1TA4ZRFZZZ001M 1 meter
OR-P1TF4ZRFZZZ001M 1 meter
OR-P1TC4ZRRZZZ001M 1 meter
OR-P1TA4ZRFZZZ002M 2 meters
OR-P1TF4ZRFZZZ002M 2 meters
OR-P1TC4ZRRZZZ002M 2 meters
12 CONNECTOR
PIGTAIL, LC-PC
12 CONNECTOR
12 FIBER PIGTAIL, LC-PC
12 CONNECTOR
12 FIBER PIGTAIL, LC-UPC
12 FIBER
OR-P1TA4ZRGZZZ001M 1 meter
OR-P1TF4ZRGZZZ001M 1 meter
OR-P1TC4ZRSZZZ001M 1 meter
OR-P1TA4ZRGZZZ002M 2 meters
OR-P1TF4ZRGZZZ002M 2 meters
OR-P1TC4ZRSZZZ002M 2 meters
PATCH CORDS Low Smoke Zero Halogen
Fiber Optic Cable Assemblies for Standard Performance Systems
NOTE: All pigtail products include a 1 meter breakout section consisting of 900 µm buffered fiber with terminated ends. LC, SC and ST cable assemblies have
connectors with ceramic ferrules. For other lengths and configurations, consult the Ortronics sales department.
Six Connector Pigtails
OR-P1SF4ZRFZZZ001M
OR-P1SF4ZRGZZZ001M
OR-P1SC4ZRRZZZ001M
OR-P1SC4ZRSZZZ001M
Twelve Connector Pigtails
OR-P1SF4ZRFZZZ001M
OR-P1SF4ZRGZZZ001M
OR-P1SC4ZRRZZZ001M
OR-P1SC4ZRSZZZ001M
OptiMo Multimode
(62.5/125) PC/LSZH
OptiMo Laser Optimized
(50/125) PC/LSZH
OptiMo Single-mode
UPC/LSZH
6 CONNECTOR
PIGTAIL, SC-PC
6 FIBER
6 CONNECTOR
PIGTAIL, SC-PC
6 FIBER
6 CONNECTOR
PIGTAIL, SC-UPC
6 FIBER
OR-P1SA4ZLFZZZ001M
1 meter
OR-P1SF4ZLFZZZ001M
1 meter
OR-P1SC4ZLRZZZ001M
1 meter
OR-P1SA4ZLFZZZ002M
2 meters
OR-P1SF4ZLFZZZ002M
2 meters
OR-P1SC4ZLRZZZ002M
2 meters
6 CONNECTOR
PIGTAIL, LC-PC
6 FIBER
6 CONNECTOR
PIGTAIL, LC-PC
6 FIBER
6 CONNECTOR
PIGTAIL, LC-UPC
6 FIBER
OR-P1SA4ZLGZZZ001M
1 meter
OR-P1SF4ZLGZZZ001M
1 meter
OR-P1SC4ZLSZZZ001M
1 meter
OR-P1SA4ZLGZZZ002M
2 meters
OR-P1SF4ZLGZZZ002M
2 meters
OR-P1SC4ZLSZZZ002M
2 meters
OptiMo Multimode
(62.5/125) PC/LSZH
OptiMo Laser Optimized
(50/125) PC/LSZH
OptiMo Single-mode
UPC/LSZH
12 CONNECTOR
PIGTAIL, SC-PC
12 CONNECTOR
12 FIBER PIGTAIL, SC-PC
12 CONNECTOR
12 FIBER PIGTAIL, SC-UPC
OR-P1TA4FLFZZZ0001M
1 meter
OR-P1TF4ZLFZZZ0001M 1 meter
OR-P1TC4ZLRZZZ0001M 1 meter
OR-P1TA4FLFZZZ0002M
2 meters
OR-P1TF4ZLFZZZ0002M 2 meters
OR-P1TC4ZLRZZZ0002M 2 meters
12 CONNECTOR
PIGTAIL, LC-PC
12 CONNECTOR
12 FIBER PIGTAIL, LC-PC
OR-P1TA4FLGZZZ0001M
1 meter
OR-P1TF4ZLGZZZ0001M 1 meter
OR-P1TC4ZLSZZZ0001M 1 meter
OR-P1TA4FLGZZZ0002M
2 meters
OR-P1TF4ZLGZZZ0002M 2 meters
OR-P1TC4ZLSZZZ0002M 2 meters
12 CONNECTOR
12 FIBER PIGTAIL, LC-UPC
12 FIBER
12 FIBER
169
PATCH CORDS
Pre-Terminated Momentum® Backbone Cables
Pre-Terminated MTP To MTP Multimode Momentum Backbone Cables
PART NO.
DESCRIPTION
OR-TOBPLAFFZAAxxxM
Plenum, 50 LMOF, OM#, no pins,
12-fibers, aqua, meters
OR-TOBPLAFFZAAxxxF
Plenum, 50 LMOF, OM#, no pins,
12-fibers, aqua, feet
OR-TOBLLAFFZAAxxxM
LSZH, 50 LMOF, OM#, no pins,
12-fibers, aqua, meters
OR-TOBLLAFFZAAxxxF
LSZH, 50 LMOF, OM#, no pins,
12-fibers, aqua, feet
Note: replace xxx with length in feet or meters (refer to F or M part number).
170
PATCH CORDS
Pre-Terminated Momentum® Backbone Cables
Pre-Terminated MTP To MTP Single-Mode Momentum Backbone Cables
PART NO.
DESCRIPTION
OR-TOBPIAFCZIIxxxM
Plenum, single-mode, OS2, no pins,
12-fibers, yellow, meters
OR-TOBPIAFCZIIxxxF
Plenum, single-mode, OS2, no pins,
12-fibers, yellow, feet
OR-TOBLIAFCZIIxxxM
LSZH, single-mode, OS2, no pins,
12-fibers, yellow, meters
OR-TOBLIAFCZIIxxxF
LSZH, single-mode, OS2, no pins,
12-fibers, yellow, feet
Note: replace xxx with length in feet or meters (refer to F or M part number).
Momentum Backbone cables can also be ordered in 62.5/125 and standard 50/125
optical fiber for legacy and low data rate applications. Please contact your Ortronics
sales representative for assistance.
Harness
Ortronics harnesses are used to
break out the MPO-fitted trunk
cable into LC duplex connectors
to plug directly into the active
device. Each harness has a
12-fiber MTP*/MPO pinned (male)
connector on one end and 6
duplex LC furcation tubes on the
other. Each leg of the LC end can
be either identical in length, or
each leg can be staggered 30mm
(1.18˝) longer than the tube
before it; another way to minimize
and manage excess cable slack.
PART NO.
DESCRIPTION
63900071-001
Harness assembly, 12 fiber, MPO (M)/LC
Duplex, A-B, 50 LOMF, 2m
63900071-002
Harness assembly, 12 fiber, MPO (M)/LC
Duplex, A-B, 50 LOMF, staggered, 3m
63900071-003
Harness assembly, 12 fiber, MPO (M)/LC
Duplex, A-B, 50 LOMF, staggered, 4m
63900071-004
Harness assembly, 12 fiber, MPO (M)/LC
Duplex, A-A, 50 LOMF, 2m
63900071-005
Harness assembly, 12 fiber, MPO (M)/LC
Duplex, A-A, 50 LOMF, staggered, 3m
63900071-006
Harness assembly, 12 fiber, MPO (M)/LC
Duplex, A-A, 50 LOMF, staggered, 4m
®
*MTP is a registered trademark of
UC Conec.
171
FIELD-INSTALLABLE CONNECTORS
The most critical point in any optical
interconnect is the physical contact
interface between mated connector
pairs. When polishing fiber connectors,
a small lens is created at the tip of the
connector and the shape of this lens
critically impacts transmission of light.
Utilizing advanced laser interferometry
equipment to monitor the manufacturing
process, Ortronics® OptiMo® prepolished field termination connectors
exhibit highly controlled end-face
geometry resulting in reliable, low
insertion loss, minimal return loss
connections. In addition, this approach
eliminates imprecise epoxy application,
time consuming curing, and highly
variable hand polishing from field
installation practices. The net effect
is reduced installation expense,
higher yield field terminations, and
better performance.
Features
Benefits
nNo epoxy, polishing, or fusion
splicing required
nFast, easy assembly in the field
nNo special tools required
nCommon fiber tools, readily available
nFast installation
n Cost savings
nFactory prepared and verified end
face
nReliability and superior performance
n62.5, 50 micron LOMF and
single-mode versions available*
nFlexibility for many installation
applications
nUnlimited shelf life
nReady when needed, reduced waste
*All 50/125 field-installable connectors are suitable for use with 10 Gigabit (10GBASE-SR applications
and 10GFC) systems.
172
FIELD-INSTALLABLE CONNECTORS
OptiMo® Pre-Polished Connectors
OR-205KAS9GA-50T
LC Field-Installable,
50/125, 900 Micron Buffer
OptiMo 10Gb/s field-installable LC
connector for use with 50 micron
multimode fiber is suitable for
10 Gigabit applications. The OptiMo
10Gb/s technology incorporates a
factory-bonded fiber stub, ceramic
ferrule, and precise factory polish.
Designed for installation on 900 micron
buffered fiber. Optional kits available
for installation on 2.0 mm diameter
jacketed cables (see OR-20500267).
OR-205KAS9GA-09
LC Field-Installable,
Single-mode,
900 Micron Buffer
PART NO.
DESCRIPTION
OR-205KAS9GA-50T
Individually packaged
NOTE: All 50/125 field-installable connectors are suitable for use with
10 Gigabit (10GBASE-SR applications and 10GFC) systems.
PART NO.
DESCRIPTION
OR-205KAS9GA-09
Individually packaged
PART NO.
DESCRIPTION
OR-205KAS9GA-62
Individually packaged
PART NO.
DESCRIPTION
OR-20500267
LC accessory kit for 2.0 mm and
3.0 mm jacketed fiber
OptiMo field-installable LC connector for
use with single-mode fiber incorporates
a factory-bonded fiber stub, ceramic
ferrule, and precise factory polish.
Designed for installation on 900 micron
buffered fiber. Optional kits available
for installation on 2.0 mm diameter
jacketed cables (see OR-20500267).
OR-205KAS9GA-62
LC Field-Installable, 62.5/125,
900 Micron Buffer
OptiMo field-installable LC connector
for use with 62.5 micron multimode fiber
incorporates a factory-bonded fiber stub,
ceramic ferrule, and precise factory polish.
Designed for installation on 900 micron
buffered fiber. Optional kits available for
installation on 2.0 mm diameter jacketed
cables (see OR-20500267).
OR-20500267
LC Accessory Kit
for 2.0 mm and 3.0 mm
Jacketed Fiber
This is the Ortronics accessory kit for use
when installing LC connectors on 2.0 mm
or 3.0 mm jacketed cables. Kit includes
two strain relief connector boots using
flexible engineering rubber, 3.0 mm and
2.0 mm crimp rings.
173
FIELD-INSTALLABLE CONNECTORS
OptiMo® Pre-Polished Connectors
OR-205KAS9FA-50T
SC Field-Installable, 50/125,
900 Micron Buffer
OptiMo 10 Gb/s field-installable SC
connector for use with 50 micron multimode fiber is suitable for 10 Gigabit
applications. The OptiMo 10Gb/s
technology incorporates a factory-bonded
fiber stub, ceramic ferrule, and precise
factory polish. Designed for installation
on 900 micron buffered fiber. Optional
kits available for installation on 2.4 to
3.0 mm diameter jacketed cables
(see OR-20500237).
OR-205KAS9FA-09
SC Field-Installable, Singlemode, 900 Micron Buffer
PART NO.
DESCRIPTION
OR-205KAS9FA-50T
Individually packaged
NOTE: All 50/125 field-installable connectors are suitable for use with
10 Gigabit (10GBASE-SR Applications and 10GFC) systems.
PART NO.
DESCRIPTION
OR-205KAS9FA-09
Individually packaged
PART NO.
DESCRIPTION
OR-205KAS9FA-62
Individually packaged
SC Accessory Kit for 2.4
and 3.0 mm Jacketed Fiber
PART NO.
DESCRIPTION
Ortronics accessory kit for use in
installing SC connectors on 2.4 to 3.0 mm
jacketed cables. Kit includes strain relief
connector boot using flexible engineering
rubber, a cord adapter, a 2.4 mm crimp
ring, and a 3.0 mm crimp ring.
OR-20500237
Optional strain relief boot accessory
kit for use in installing SC connectors
on 2.4 and 3.0 mm jacketed cables
OptiMo field-installable SC connector for
use with single-mode fiber. The OptiMo
technology incorporates a factory-bonded
fiber stub, ceramic ferrule, and precise
factory polish. Designed for installation
on 900 micron buffered fiber. Optional
kits are available for installation on 2.4
to 3.0 mm diameter jacketed cables
(see OR-20500237).
OR-205KAS9FA-62
SC Field-Installable, 62.5/125,
900 Micron Buffer
OptiMo field-installable SC connector
for use with 62.5 micron multimode
fiber incorporates a factory-bonded
fiber stub, ceramic ferrule, and precise
factory polish. Designed for installation
on 900 micron buffered fiber. Optional
kits available for installation on 2.4 to
3.0 mm diameter jacketed cables
(see OR-20500237).
OR-20500237
174
FIELD-INSTALLABLE CONNECTORS
OptiMo® Pre-Polished Connectors
OR-205KAS9EA-50T
ST Field-Installable,
50/125, 900 Micron Buffer
OptiMo 10Gb/s field-installable ST
connector for use with 50 micron
multimode fiber is suitable for 10 Gigabit
applications. The OptiMo 10Gb/s technology
incorporates a factory-bonded fiber stub,
ceramic ferrule, and precision factory
polish. Designed for installation on
900 micron buffered fiber. Optional kits
are available for installation on 2.4 to
3.0 mm diameter jacketed cables
(see OR-20500236).
OR-205KAS9EA-62
ST Field-Installable,
62.5, 900 Micron Buffer
DESCRIPTION
OR-205KAS9EA-50T
Individually packaged
NOTE: All 50/125 field-installable connectors are suitable for use with
10 Gigabit (10GBASE-SR applications and 10GFC) systems.
PART NO.
DESCRIPTION
OR-205KAS9EA-62
Individually packaged
PART NO.
DESCRIPTION
OR-205KAS9EA-09
Individually packaged
ST Accessory Kit for 2.4
and 3.0 mm Jacketed Fiber
PART NO.
DESCRIPTION
Ortronics accessory kit for use in installing
ST connectors on 2.4 to 3.0 mm jacketed
cables. Kit includes strain relief connector
boot using flexible engineering rubber,
a 2.4 mm crimp ring, and a 3.0 mm
crimp ring.
OR-20500236
Optional strain relief boot accessory
kit for use in installing ST connectors
on 2.4 and 3.0 mm jacketed cables.
Package of 25
OptiMo field-installable ST connector
for use with 62.5 micron multimode fiber
incorporates a factory-bonded fiber stub,
ceramic ferrule, and precise factory polish.
Designed for installation on 900 micron
buffered fiber. Optional kits are available
for installation on 2.4 to 3.0 mm diameter
jacketed cables (see OR-20500236).
OR-205KAS9EA-09
PART NO.
ST Field-Installable, Singlemode, 900 Micron Buffer
OptiMo field-installable ST connector for
use with single-mode fiber incorporates a
factory-bonded fiber stub, ceramic ferrule,
and precise factory polish. Designed for
installation on 900 micron buffered fiber.
Optional kits are available for installation
on 2.4 to 3.0 mm diameter jacketed
cables (see OR-20500236).
OR-20500236
175
FIELD-INSTALLABLE CONNECTORS
OptiMo® Pre-Polished Connectors Tools & Kits
With any tool kits, components get lost or worn out over time. To accommodate replenishment needs, Ortronics® offers a
complete range of high quality accessory components supporting the OptiMo® field termination system. From cleaning
supplies to cleavers, microscopes, instruction sheets, fiber strip and crimp tools, Ortronics has the components to meet a
range of needs and keep installations moving forward.
OR-854B00000-1
Complete OptiMo
Termination Kit
PART NO.
DESCRIPTION
OR-854B00000-1
Complete OptiMo termination kit
PART NO.
DESCRIPTION
OR-61500858
Breakout kit, 12 fiber
OR-61500868
Breakout kit, 6 fiber
OptiMo Universal
Connector Installation Tool
PART NO.
DESCRIPTION
OR-60300203
Includes one clamp and tool
compatible with OptiMo LC, SC and
ST connectors
Table Top Stand
PART NO.
DESCRIPTION
OR-60300204
One table top stand for installation tool
Ortronics complete OptiMo Termination
Kit for installing ST, SC and LC type
connectors. Kit includes universal
installation tool, fiber cleaver, crimping
tool, instruction manual, fiber preparation
guide, microscope, alcohol wipes, felt
tipped marker, scissors, tweezers, waste
container and one fiber/cable stripper.
OR-61500858
OptiMo Breakout Kits
To be used with loose tube cables.
OR-61500868
OR-60300203
OR-60300204
176
FIELD-INSTALLABLE CONNECTORS
OptiMo® Pre-Polished Connectors Tools & Kits
Precision Fiber Cleave Tool
OR-60300210
PART NO.
DESCRIPTION
OR-60300210
Precision cleaver
PART NO.
DESCRIPTION
OR-60300123
Cleaver with preset stop
PART NO.
DESCRIPTION
OR-60300128
Cleave inspection microscope (100x)
PART NO.
DESCRIPTION
OR-60300125
Crimp Tool with Die
Fiber Cleave Tool
OR-60300123
Microscope
OR-60300128
OptiMo Crimp Tool with Die
OR-60300125
177
FIELD-INSTALLABLE CONNECTORS
OptiMo® Pre-Polished Connectors Tools & Kits
Strip Tools
OR-60300124
OR-60300127
OR-60300205
PART NO.
DESCRIPTION
OR-60300124
Miller® style
OR-60300127
Nick-free style
OR-60300205
Universal jacket/buffer
PART NO.
DESCRIPTION
OR-854A00001
80 alcohol wipes and felt
tipped marker
PART NO.
DESCRIPTION
OR-71601671
Compatible with LC, SC and ST
Alcohol Wipes
OptiMo Installation Instruction Manual
178
FIELD-INSTALLABLE CONNECTORS
OptiMo® Field-Installable Anaerobic Connectors
OptiMo quick-cure,
anaerobic epoxy fieldinstallable connectors
speed installation time.
Strip the fiber, inject the
adhesive into the connector,
insert and scribe the fiber,
then polish the connector
end face to perfection
for a high performance
termination. Users and
installers will benefit from
high productivity and low
connector costs — which
translates directly into
savings.
Features
Benefits
nSimple design
nAllows for lower unit costs. Advanced engineering helps
us ensure long life and saves replacement costs.
nNo capital equipment
nWith OptiMo field polish connectors, there is no need for
curing ovens, UV light sources, or expensive polishing
machines. It is possible to terminate anywhere without
worrying about power sources or charging batteries.
nFast application
nTerminate fibers in about two minutes following the easy
installation instructions, saving on installation time.
nPrecision ceramic ferrule nProvides durability, temperature stability and scratch
resistance.
nSingle-mode or
multimode
nSimplistic offering reduces confusion by offering one style
connector that covers all multimode applications to include
62.5µm, standard 50µm, or laser optimized 50µm for
10 Gigabit transmission, and single-mode.
nPre-radius LC
nOne-piece pre-radius LC connector for minimal polishing
and consistent end-face geometry resulting in more
consistent optical performance.
nReliable performance
nSecure the installation of fiber using an adhesive and
primer for a secure worry-free termination.
nMinimal tools
nA compact and economical tool kit contains all the
common tools necessary to complete the termination.
Anaerobic Adhesive Connectors
OR-205KAN9GA-MM
OR-205KAN9GA-SM
OR-205KAN9FA-MM
OR-205KAN9FA-SM
OR-205KAN9EA-MM
PART NO./SINGLE
DESCRIPTION
OR-205KAN9GA-MM
LC, multimode, buffer size (µm) 900
OR-205KAN9GA-SM
LC, single-mode, buffer size (µm) 900
OR-205KAN9FA-MM
SC, multimode, buffer size (µm) 900
OR-205KAN9FA-SM
SC, single-mode, buffer size (µm) 900
OR-205KAN9EA-MM
ST, multimode, buffer size (µm) 900
OR-205KAN9EA-SM
ST, single-mode, buffer size (µm) 900
OR-205KAN9EA-SM
179
FIELD-INSTALLABLE CONNECTORS
OptiMo® Field-Installable Anaerobic Connectors
Anaerobic Field Installable Connector Termination Kit
OR-85400010
PART NO.
DESCRIPTION
OR-85400010
Contains all tools necessary for complete
OptiMo LC, ST and SC anaerobic terminations:
contractor bag, micro strip tool, scribe tool, jacket
strip tool, scissors, cut length templates, polishing
pad, polishing pucks, microscope
NOTE: Consumables: polishing paper, adhesive and primer are sold separately.
Anaerobic Field Installable Connector Multimode Polishing Kit
OR-85400012
PART NO.
DESCRIPTION
OR-85400012
Consumables necessary for complete
OptiMo LC, ST and SC terminations: dry wipes,
dispensing tips, syringe, type G polishing paper,
type F polishing paper (terminates approx.
100 connectors)
Anaerobic Field Installable Connector Single-Mode Polishing Kit
OR-85400011
PART NO.
DESCRIPTION
OR-85400011
Consumables necessary for complete
OptiMo LC, ST and SC terminations: dry wipes,
dispensing tips, syringe, type G polishing paper,
type F polishing paper, type M polishing paper
(terminates approx. 100 connectors)
PART NO.
DESCRIPTION
OR-70600021
Adhesive
OR-70600022
Primer
OR-60300200
LC stainless polishing puck also suitable
for Keyed LC connector
OR-60300179
Package of 250 dry wipes
OR-60300182
Dispensing tips, package of 125
OR-60300183
Syringe, package of 10
OR-60300184
Type M polishing paper, package of
10 sheets, SM only
OR-60300185
Type F polishing paper, package of 10 sheets
OR-60300186
Type G polishing paper, package of 20 sheets
Individual Tools and Accessory Items (Anaerobic)
OR-70600021
OR-60300179
OR-60300184
180
OR-70600022
OR-60300182
OR-60300185
OR-60300200
OR-60300183
OR-60300186
WORKSTATION SYSTEMS
Fib-or-Cop II
Fib-or-Cop II provides greater multimedia capacity, addressing the increasing
need
for fiber in horizontal cabling systems. This larger version of the Fib-or-Cop has
the ability to mount six TracJack® modules in the face, with a choice of fiber (LC,
SC, ST
or MT-RJ) and/or copper (TracJack) exiting from the bottom. This design allows
the cover to be removed without disrupting the connections in the face-plate. The
wide variety of connectors located in the bottom positions can be further protected
by an optional snap-on shroud.
In addition, the Ortronics line of workstation solutions offers many alternative
designs to accommodate multimedia needs for in-wall and surface mount
installations.
Fib-or-Cop II
OR-62100041
PART NO.
DESCRIPTION
OR-62100041
Base and cover for six TracJack modules,
5˝ x 8˝ x 1.19˝
PART NO.
DESCRIPTION
OR-62100038
Package of five protective bottom shrouds
PART NO.
DESCRIPTION
OR-62100044
3-ST duplex (6 fibers) multimode, beige
adapters, phosphor-bronze alignment sleeves
OR-62100045
3-ST duplex (6 fibers) single-mode,
blue adapters, ceramic alignment sleeves
OR-62100046
6-SC simplex (6 fibers) multimode, beige
adapters, phosphor-bronze alignment sleeves
OR-62100047
6-SC simplex (6 fibers) single-mode,
blue adapters, ceramic alignment sleeves
OR-62100048
3-SC duplex (6 fibers) multimode, beige
adapters, phosphor-bronze alignment sleeves
OR-62100049
3-SC duplex (6 fibers) single-mode,
blue adapters, ceramic alignment sleeves
OR-62100050
6-LC duplex (12 fibers) multimode, beige
adapters, phosphor-bronze alignment sleeves
OR-62100051
6-LC duplex (12 fibers) single-mode,
blue adapters, ceramic alignment sleeves
OR-62100052
6-MT-RJ (12 fibers) feed-through
multimode, beige adapters
OR-62100053
6-MT-RJ (12 fibers) single-mode,
blue adapters
OR-62100054
4-LC quad, 50 LOMF,
aqua adapters
Fib-or-Cop II Protective Bottom Shroud
OR-62100038
Fib-or-Cop II Bottom Adapter Plates
OR-62100044
OR-62100050
OR-62100046
OR-62100052
OR-62100048
181
WORKSTATION SYSTEMS
TracJack® Modules & Faceplates
TracJack Faceplates
OR-40300549
OR-40300546
OR-40300548
OR-40300545
OR-40300547
OR-40300554
OR-40300555
PART NO.
DESCRIPTION
OR-40300549
Single gang plastic, holds one TracJack,
2.75˝ x 4.5˝, fog white
OR-40300548
Single gang plastic, holds two TracJacks,
2.75˝ x 4.5˝, fog white
OR-40300547
Single gang plastic, holds three TracJacks,
2.75˝ x 4.5˝, fog white
OR-40300546
Single gang plastic, holds four TracJacks,
2.75˝ x 4.5˝, fog white
OR-40300545
Single gang plastic, holds six TracJacks,
2.75˝ x 4.5˝, fog white
OR-40300554
Dual gang plastic, holds eight TracJacks,
4.5˝ x 4.5˝, fog white
OR-40300555
Dual gang plastic, holds six TracJacks,
4.5˝ x 4.5˝, fog white
NOTE: Not compatible with the following faceplates:
OR-40300554, OR-40300620
NOTE: Standard color for plastic TracJack faceplates is fog white. For electrical
ivory add -13, for white add -88 and for Wiremold® ivory add -99 to end of part
number. For other colors, contact sales.
TracJack Surface Mount Boxes
OR-404TJ4
OR-404TJ6
PART NO.
DESCRIPTION
OR-404TJ2X2
Holds four TracJacks, jacks exit from both sides,
4.0˝ x 2.42˝ x 1.16˝
OR-404TJ6
Holds six TracJacks, 6.98˝ x 4.33˝ x 1.16˝ Includes
internal storage ring for fiber and two TracJack
blanks. Can mount directly to single or double
gang recessed wall boxes.
PART NO.
DESCRIPTION
OR-40300185*
Single-gang, 3˝ x 4.7˝ x 2˝
OR-40300186
Double-gang, 4.9˝ x 4.7˝ x 2˝
Surface Mount Outlet Boxes for TracJack
OR-40300185
OR-40300186
NOTE: Compatible with Wiremold® 2700, 2800 and 2900 Raceway Series.
Optional Accessories
PART NO.
DESCRIPTION
OR-70900020
Adhesive-back magnet for single-gang
OR-70900022
Adhesive-back magnet for double-gang
OR-70900070
Double-sided adhesive
(order two for a double-gang)
NOTE: Compatible with Wiremold® 2700, 2800 and 2900 Raceway Series.
182
WORKSTATION SYSTEMS
TracJack® Modules & Faceplates
TracJack Modules
TracJack is a versatile single-module solution—the perfect combination of high
quality, enhanced performance, labor savings, ease of use, and flexibility in design.
TracJack front removable snap-in modules make moves, adds, and changes easy.
TracJack products are compatible with Fib-or-Cop II and the complete line of
TracJack faceplates and surface mount boxes. TracJack modules are available in
LC, SC, ST, FC, and MT-RJ styles in order to suit any installation requirement.
Features
Benefits
nSnap-in module
nSimple, secure installation
nModular design
nFlexibility in structured cabling system design
nFront removable
nFacilitates quick moves, adds, and changes
nNo special tools required
nReduced installation expense
nFully compatible with all TracJack faceplates
nProvides wide range of design possibilities
TracJack Modules
OR-63700039*
OR-63700017*
OR-63700078*
OR-63700026
OR-63700081
OR-63700050
OR-63700066*
OR-63700011
OR-63700048
OR-63700082
OR-63700075*
OR-63700051
OR-63700013
OR-63700080
PART NO.
DESCRIPTION
OR-63700039*
1-LC (2 fibers) multimode, beige adapter, phosphor-bronze
alignment sleeves, 180° exit, flush, 1 unit
OR-63700050
1-LC (2 fibers) multimode, beige adapter, phosphor-bronze
alignment sleeves, 45° angled exit, 2 units
OR-63700075*
1-LC (2 fibers) multimode, aqua adapter, ceramic
alignment sleeves, 180º exit, flush, 1 unit
OR-63700017*
1-SC simplex multimode, beige adapter, phosphor-bronze
alignment sleeves, 180° exit, flush, 1 unit
OR-63700066*
2-SC simplex multimode, beige adapters, phosphor-bronze
alignment sleeves, 180° exit, 1 unit
OR-63700051
1-SC simplex multimode, beige adapter, phosphor-bronze
alignment sleeves, 45° angled exit, flush, 2 units
OR-63700078*
1-SC simplex multimode, aqua adapter, ceramic
alignment sleeve, 180º exit, flush, 1 unit
OR-63700011
1-ST simplex multimode, metal adapter,
phosphor-bronze alignment sleeves, 180° exit, 1 unit
OR-63700013
2-ST multimode, metal adapter, phosphor-bronze
alignment sleeves, 180° exit, 1 unit
OR-63700026
1-MT-RJ (2 fibers) feed-through, multimode,
beige adapter, 180° exit, flush, 1 unit
OR-63700048
1-MT-RJ (2 fibers) feed-through, multimode,
beige adapter, 45° angled exit, 2 units
OR-63700080
1-LC (2 fibers) multimode, aqua adapter, ceramic
alignment sleeves, 45° angled exit, 2 units
OR-63700081
2-SC simplex multimode, aqua adapters, ceramic
alignment sleeves, 180° exit, 1 unit
OR-63700082
1-SC simplex multimode, aqua adapter, ceramic
alignment sleeves, 45° angled exit, 2 units
NOTE: Consult sales at 800-934-5432 for single-mode part numbers.
*Also available in black, red, orange, yellow, green, light green, WM light gray, WM gray, white
and WM ivory. housing colors: -00, -25, -42, -43, -44, -45, -68, -78, -88, -99
183
H IGH P E RF ORM A N C E S T R U C T U R E D C A BLIN G
PR OD UCT S & S O L U T I O N S
TechChoice
Solutions
®
Keystone Jacks
& Modules
Faceplates
Patch Panels
Patch Cords
TechChoice® structured cabling solutions combine the
reliability and ease of installation you’d expect from
Ortronics® with performance and rugged construction
to provide a cost-effective option for communications
Surface
Mount Boxes
technicians. Category 5e and 6 products are third party
component tested to meet Category 5e and 6 component
specifications for TIA/EIA-568-B.2 and ISO11801-2002.
Rack Mount
Fiber Cabinets
F E AT U R E D P R O D U C T S
TechChoice
Jacks
186
P.
P.186
Keystone
Jacks
P.186
Fiber
Modules
P.187
Multimedia
Modules
P.188
VGA
Faceplates
P.188
Plastic
Faceplates
P.188
Stainless Steel
Faceplates
P.190
Category 6 &
Category 5e
Patch Panels
P.190
Patch
Panel Kit
P.191
Category 6 &
Category 5e
Patch Cords
P.192
Surface
Mount Boxes
P.193
Fiber Splice
Cabinets
TechChoice
Patch Panels
190
P.
TechChoice
Fiber Cabinets
193
P.
KEYSTONE JACKS & MODULES
TechChoice® keystone jacks and modules feature an easy-to-follow universal wiring label and support standard termination
using a 110-impact tool. The keystone footprint allows for the greatest flexibility in installation scheduling because its rear
insertion into the faceplate allows the technician to complete the termination before, during and after the construction process.
Keystone Jacks
OR-KS6
OR-KSRJ25
OR-KS5E
OR-KSICON
PART NO.
Single Pack
PART NO.
Pack of 25
DESCRIPTION
OR-KS6A
OR-KS6
Category 6, 8-position, T568A/B
wiring, icon compatible.
OR-KS5EA
OR-KS5E
Category 5e, 8-position, T568A/B
wiring, icon compatible.
OR-KSRJ25A
OR-KSRJ25
RJ25, 6 position jack, USOC wiring,
icon compatible
—
OR-KSICON
TechChoice keystone icon, 2 sided
voice/data, package of 25
Add tailcode to end of part number (example: OR-KS6-42).
WM indicates Wiremold color match.
WM
WM
WM
WM
RJ25 Color Choices
Category 5e and 6 Color Choices
-00=Black; -13=Electrical ivory; -36=Blue; -42=Red; -88=White;
-99=Wiremold® ivory; -43=Orange; -44=Yellow, -45=Green; -78=Gray.
Standard color is fog white, requiring no tail code.
Fiber Keystone Modules
OR-KSST
OR-KSLC
OR-KSSC
PART NO.
DESCRIPTION
OR-KSST
1-ST simplex multimode, phosphor-bronze alignment
sleeves, 180º exit. Fog white. Sold with dust cover
OR-KSSC
1-SC simplex multimode, phosphor-bronze alignment
sleeves, 180º exit. Fog white. Sold with dust cover
OR-KSLC
1-LC (2 fibers) multimode, phosphor-bronze alignment
sleeves, 180º exit. Fog white. Sold with dust cover
OR-KSMTRJ
1 MT-RJ (2 fibers) multimode, feed-through, 180º exit,
flush. Fog white. Sold with dust cover
OR-KSMTRJ
NOTE: For Wiremold Ivory, add tail code of -99 to end of part number
(example OR-KSST-99). Sold individually.
186
KEYSTONE JACKS & MODULES
Multimedia Keystone Solutions
OR-KSHDMI
OR-KSRCAR
OR-KSRCAY
OR-KS35ST
OR-KSUSBAA
OR-KSBNC75
OR-KSFCNR
OR-KSSV
OR-KSRCAG
OR-KSRCAW
OR-KS35STST
OR-KSUSBAB
OR-KSBNC
OR-KSB10
OR-KSSVIDC
OR-KSRCABL
OR-KSRCAB
OR-KS14ST
OR-KSBP
OR-KSFCN
PART NO.
DESCRIPTION
OR-KSHDMI
HDMI, female to female, 19pin
OR-KSSV
S-Video to 110
OR-KSSVIDC
S-Video, female to female
OR-KSRCAR
RCA red to 110
OR-KSRCAG
RCA green to 110
OR-KSRCABL
RCA blue to 110
OR-KSRCAY
RCA yellow to 110
OR-KSRCAW
RCA white to 110
OR-KSRCAB
RCA black to 110
OR-KS35ST
3.5mm, stereo jack, female to female
OR-KS35STST
3.5mm, stereo jack, female to screw term
OR-KS14ST
1/4˝ stereo jack, female to solder
OR-KSUSBAA
USB 2.0 A-A, female to female
OR-KSUSBAB
USB 2.0 A-B, female to female
OR-KSBP
Binding post, set of 2
OR-KSBNC75
BNC 75 ohm, female to female, 75 ohm
OR-KSBNC
BNC 50 ohm, female to female, 50 ohm
OR-KSFCN
F Conn 75 ohm, female to female
OR-KSFCNR
F Conn 75 ohm, recessed, female to female
OR-KSB10
Blank, package of ten
NOTE: Standard color is fog white. For other colors, contact sales.
187
FACEPLATES
OR-KSFP4V110
VGA Faceplates
VGA Faceplates are available
in high impact 94V-0 rated
thermoplastic. The single gang
version includes one integrated
VGA connector. The double
gang version includes two
VGA connectors.
PART NO.
DESCRIPTION
OR-KSFP4V110
Single-gang, holds four keystones, VGA to 110
OR-KSFP4VFT
OR-KSFP8V110
OR-KSFP8VFT
Single-gang, holds four keystones,
VGA with crimp pins
Double-gang, holds eight keystones,
two VGA to 110
Double-gang, holds eight keystones, two VGA
with crimp pins
NOTE: Standard color is fog white. Add -13 for electrical ivory.
OR-KSFP2
OR-KSSS3
Faceplates
TechChoice® faceplates are
available in high impact 94V-0
rated thermoplastic and
stainless steel, with a variety
of port capacities to match
your workstation applications.
All faceplates allow for a flush
jack finish.
Plastic Faceplates with Label Fields
PART NO.
DESCRIPTION
OR-KSFP1
Single gang, holds one keystone
OR-KSFP2
Single gang, holds two keystones
OR-KSFP3
Single gang, holds three keystones
OR-KSFP4
Single gang, holds four keystones
OR-KSFP6
Single gang, holds six keystones
OR-KSFP8
Dual gang, holds eight keystones
OR-KSFP12
Dual gang, holds 12 keystones
NOTE: Standard color is fog white. Add -13 for electrical ivory,
-88 for white or -99 for Wiremold ivory.
Stainless Steel Faceplates with Label Fields
OR-KSFPR2
PART NO.
DESCRIPTION
OR-KSSS1
Single gang, holds one keystone
OR-KSSS2
Single gang, holds two keystones
OR-KSSS3
Single gang, holds three keystones
OR-KSSS4
Single gang, holds four keystones
OR-KSSS6
Single gang, holds six keystones
OR-KSSS8
Dual gang, holds eight keystones
OR-KSSS12
Dual gang, holds 12 keystones
Plastic Faceplates without Label Fields
OR-KSD4
OR-KS106S4
PART NO.
DESCRIPTION
OR-KSFPR1
Single gang with one keystone opening
OR-KSFPR2
Single gang with two keystone openings
OR-KSFPR3
Single gang with three keystone openings
OR-KSFPR4
Single gang with four keystone openings
OR-KSFPR6
Single gang with six keystone openings
NOTE: Standard color is fog white. Add -13 for electrical ivory,
-88 for white or -99 for Wiremold ivory.
Plastic Rectangular GFCI & 106 Frames
PART NO.
DESCRIPTION
OR-KSDS2
Stylistic rectangular frame with 2 keystone openings
OR-KSDS3
Stylistic rectangular frame with 3 keystone openings
OR-KSDS4
Stylistic rectangular frame with 4 keystone openings
OR-KS106S2
106 style frame with 2 keystone openings
OR-KS106S4
106 style frame with 4 keystone openings
NOTE: Standard color is fog white. Add -13 for electrical ivory,
-88 for white or -99 for Wiremold ivory.
188
TECHCHOICE® ADAPTERS AND BEZELS
KSLTJA
TechChoice Adapters
for Bticino
TechChoice Adapters
for British Standard
TechChoice Adapters
for Bticino
PART NO.
DESCRIPTION
KSLVJA
Designed to fit Bticino Living faceplates, holds one
TechChoice Jack
KSLTJA
Designed to fit Bticino Light faceplates, holds one
TechChoice Jack
KSBMAA
Designed to fit Bticino Magic faceplates, holds one
TechChoice Jack
PART NO.
DESCRIPTION
KSB6C
6C bezel, holds one TechChoice Jack
KSB6Ce
6Ce bezel, holds one TechChoice Jack
PART NO.
DESCRIPTION
FPMK1TC
45 x 45mm Mosaic bezel, holds one
TechChoice Jack
FACEPLATES
Furniture Plates
Furniture Plates
OR-40300630
PART NO.
DESCRIPTION
OR-40300630
Holds four keystones, two-piece base and cover,
adjustable to fit a range of common furniture openings
(2.67˝-2.75˝ x 1.34˝-1.41˝) for 0.065˝ thick material
NOTE: Standard color is fog white. Add -00 for black.
189
PATCH PANELS
OR-SP6U48
OR-SPA6U48
Patch Panels
24- and 48-port TechChoice®
patch panels are available in
the traditional multi-port panel
format with 6-port modules for
Cat 6 and Cat 5e. Patch panel
kits are also available to
support individual keystone
jacks: Cat 6, Cat 5e and
multimedia (sold separately).
Category 6 with 6-port modules
PART NO.
DESCRIPTION
OR-SP6U24
24-port, T568A/B, height 1.75˝, 1 rack unit
OR-SP6U48
48-port, T568A/B, height 3.5˝, 2 rack units
Category 6 angled with 6-port modules
PART NO.
DESCRIPTION
OR-SPA6U24
24-port, angled, T568A/B, height 1.75˝,
1 rack unit
OR-SPA6U48
48-port, angled, T568A/B, height 3.5˝,
2 rack units
Category 5e with 6-port modules
OR-SP5EU24
PART NO.
DESCRIPTION
OR-SP5EU24
24-port, T568A/B, height 1.75˝, 1 rack unit
OR-SP5EU48
48-port, T568A/B, height 3.5˝, 2 rack units
Category 5e angled with 6-port modules
OR-SPKSU24
PART NO.
DESCRIPTION
OR-SPA5EU24
24-port, angled, T568A/B, height 1.75˝,
1 rack unit
OR-SPA5EU48
48-port, angled, T568A/B, height 3.5˝,
2 rack units
Patch Panel Kit (accepts KS series keystone jacks & modules)
OR-SPAKSU48
190
PART NO.
DESCRIPTION
OR-SPKSU24
24-port, height 1.75˝, 1 rack unit
OR-SPKSU48
48-port, height 3.5˝, 2 rack units
OR-SPAKSU24
24-port, angled, height 1.75˝, 1 rack unit
OR-SPAKSU48
48-port, angled, height 1.75˝, 2 rack units
PATCH CORDS
OR-SPC5E05-05
Modular Patch Cords
TechChoice® patch cords offer
a slim design for high density
applications and come factory
terminated with a snagless boot.
Each cable is pre-tested for
component performance.
OR-SPC607-00
Category 6
PART NO.
Single Pack
PART NO.
10 Packs
DESCRIPTION
OR-SPCA603-XX
OR-SPC603-XX
Four pair stranded patch cord,
PVC length 3ft
OR-SPCA605-XX
OR-SPC605-XX
Four pair stranded patch cord,
PVC length 5ft
OR-SPCA607-XX
OR-SPC607-XX
Four pair stranded patch cord,
PVC length 7ft
OR-SPCA610-XX
OR-SPC610-XX
Four pair stranded patch cord,
PVC length 10ft
OR-SPCA615-XX
OR-SPC615-XX
Four pair stranded patch cord,
PVC length 15ft
OR-SPCA625-XX
OR-SPC625-XX
Four pair stranded patch cord,
PVC length 25ft
NOTE: Available in the following colors: -XX = -00 Black; -02 Red; -04 Yellow;
-05 Green; -06 Blue; -08 Gray; -09 White.
Add tailcode to end of part number (example: OR-SPC603-02).
Category 5e
PART NO.
Single Pack
PART NO.
10 Packs
DESCRIPTION
OR-SPCA5E03-XX
OR-SPC5E03-XX
Four pair stranded patch cord,
PVC length 3ft
OR-SPCA5E05-XX
OR-SPC5E05-XX
Four pair stranded patch cord,
PVC length 5ft
OR-SPCA5E07-XX
OR-SPC5E07-XX
Four pair stranded patch cord,
PVC length 7ft
OR-SPCA5E10-XX
OR-SPC5E10-XX
Four pair stranded patch cord,
PVC length 10ft
OR-SPCA5E15-XX
OR-SPC5E15-XX
Four pair stranded patch cord,
PVC length 15ft
OR-SPCA5E25-XX
OR-SPC5E25-XX
Four pair stranded patch cord,
PVC length 25ft
NOTE: Available in the following colors: -XX = -00 Black; -02 Red; -04 Yellow;
-05 Green; -06 Blue; -08 Gray; -09 White.
Add tailcode to end of part number (example: OR-SPC5E03-02).
191
PATCH CORDS
Low Smoke Zero Halogen
OR-SPCZA625M-XX
Low Smoke Zero
Halogen Modular
Patch Cords
TechChoice® patch cords offer
a slim design for high density
applications and come factory
terminated with a snagless boot.
Each cable is pre-tested for
component performance.
PART NO.
Single Pack
PART NO.
10 Packs
DESCRIPTION
OR-SPCZA610M-XX
OR-SPCZ610M-XX
LSZH patch cord,
Cat 6, UTP, 1M
OR-SPCZA615M-XX
OR-SPCZ615M-XX
LSZH patch cord,
Cat 6, UTP, 1.5M
OR-SPCZA620M-XX
OR-SPCZ620M-XX
LSZH patch cord,
Cat 6, UTP, 2M
OR-SPCZA625M-XX
OR-SPCZ625M-XX
LSZH patch cord,
Cat 6, UTP, 2.5M
OR-SPCZA630M-XX
OR-SPCZ630M-XX
LSZH patch cord,
Cat 6, UTP, 3M
OR-SPCZA650M-XX
OR-SPCZ650M-XX
LSZH patch cord,
Cat 6, UTP, 5M
OR-SPCZA660M-XX
OR-SPCZ660M-XX
LSZH patch cord,
Cat 6, UTP, 6M
NOTE: Available in the following colors: -XX = -05 Green; -06 Blue.
Add tailcode to end of part number (example: OR-SPCZ610M-05).
SURFACE MOUNT BOXES
OR-KSSMB2
OR-KSSMB4
OR-KSSMB6
192
Surface Mount Boxes
TechChoice® high impact surface
mount boxes accommodate
two-, four- or six-port keystone
requirements. They are compatible
with the Wiremold® Eclipse range
of solutions, or can easily be
surface installed with supplied
screws or double-sided tape.
Designation strips and clear
covers included.
PART NO.
DESCRIPTION
OR-KSSMB2
Holds two keystones, 2.42˝ x 2.18˝ x 1.16˝
OR-KSSMB4
Holds four keystones, 4.78˝ x 3.6˝ x 1.14˝
OR-KSSMB6
Holds six keystones, 6.76˝ x 3.6˝ x 1.14˝
NOTE: Available in fog white. Product dimensions are listed by length,
width and height.
RACK MOUNT FIBER CABINETS
NEW
Ortronics® TechChoice rack mount fiber enclosures are designed to offer an economical solution for fiber patching required in
LAN and campus wiring environments. These enclosures are used in conjunction with the Ortronics OFP series adapter
panels
or Momentum® 2 series cassettes to provide a complete fiber cross connect patching solution.
OR-EC01U-C
NEW
Fiber Patch Cabinets
OR-EC02U-C
OR-EC03U-C
All enclosures are supplied with
internal bend limiting spools,
cable management bend limiters,
a fixed front cassette/adapter
panel mounting bracket and
split removable top covers. The
enclosures will accept two, six, ten
and twelve splice trays per rack
unit, respectively. The hardware
package also includes rack mount
screws and a data label.
PART NO.
DESCRIPTION
OR-EC01U-C
1 rack unit, black, holds three adapter panels,
two splice trays and fixed cassette/adapter
panel bracket
OR-EC02U-C
2 rack units, black, holds six adapter panels,
four splice trays and fixed cassette/adapter
panel bracket
OR-EC03U-C
3 rack units, black, holds nine adapter panels,
six splice trays and fixed cassette/adapter
panel bracket
OR-EC04U-C
4 rack units, black, holds 12 adapter panels,
eight splice trays and fixed cassette/adapter
panel bracket
PART NO.
DESCRIPTION
OR-EC02U-S
TechChoice 2U Rack Mount Fiber Splice
Enclosure, holds 12 splice trays, black
OR-EC04U-S
TechChoice 4U Rack Mount Fiber Splice
Enclosure, holds 32 splice trays, black
OR-EC04U-C
OR-EC02U-S
NEW
Fiber Splice Cabinets
OR-EC04U-S
193
H IGH P E RF ORM A N C E S T R U C T U R E D C A BLIN G
PR OD UCT S & S O L U T I O N S
Adapters
Data
Adapters
195
P.
Ortronics offers a range of adapters which provide
connections for terminal devices and peripherals.
F E AT U R E D P R O D U C T S
ADAPTERS
NOTE: All Ortronics product dimensions are listed by width, height and depth unless specified otherwise.
OR-DB25HDFF
Gender Changer
The Ortronics gender changers
allow cabling connections to
be made between identical
connector terminations where
gender matching or correction
is required.
OR-21109DA8MKIT
Data Adapters
Ortronics data adapters
are interfaces between data
terminal equipment (DTE)
and data communications
equipment (DCE). They
are used for high density
applications where width
between ports is critical
and dimensions are within
the basic DB9, DB15 and
DB25 envelope.
PART NO.
DESCRIPTION
OR-DB25HDMM
Male-male
OR-DB25HDFF
Female-female
9-Pin Data Adapter
PART NO.
DESCRIPTION
OR-21109DA8MKIT
8 wires x 8 positions, male, 8 pins
OR-21109DA8FKIT
8 wires x 8 positions, female, 8 pins
15-Pin Data Adapter
PART NO.
DESCRIPTION
OR-211015DA8MKIT
8 wires x 8 positions, male, 8 pins
OR-211015DA8FKIT
8 wires x 8 positions, female, 8 pins
25-Pin Data Adapter
PART NO.
DESCRIPTION
OR-211025DA8MKIT
8 wires x 8 positions, male, 8 pins
OR-211025DA8FKIT
8 wires x 8 positions, female, 8 pins
195
Part
Number
Index
196
Part Number
COPPER
CONNECTIVITY
Page
PHYSICAL
SUPPORT
Part Number
OPTIMO
FIBER OPTIC
Page
TECHCHOICE
SOLUTIONS
Part Number
ADAPTERS
Part Number
Page
Page
63900071-001
171
OR-110ABC5E100
72
OR-403STJ1WP
33
OR-625MMC-48PE1B
152
63900071-002
171
OR-110ABC5E300
72
OR-403STJ11
32
OR-625MMC-48PG1B
152
63900071-003
171
OR-110ABC6050
72
OR-403STJ12
32
OR-625MMC-48PL1RB
152
63900071-004
171
OR-110ABC6100
72
OR-403STJ13
32
OR-625MMC-48PP1RB
152
63900071-005
171
OR-110ABC6300
72
OR-403STJ14
32
OR-625MMC-96PL1B
152
63900071-006
171
OR-110C5E03-06
66
OR-403STJ16
32
OR-625MMC-96PP1B
152
FPMK1TC
189
OR-110C5E05-06
66
OR-403STJ28
32
OR-845EPLPL005-1GY
67
KSB6C
189
OR-110C5E07-06
66
OR-403STJ212
32
OR-845EPLPL007-1GY
67
KSB6Ce
189
OR-110C5E09-06
66
OR-403TJUSG
34
OR-845EPLPL010-1GY
67
KSBMAA
189
OR-110C5E15-06
66
OR-404IP22
69
OR-845EPLPL025-1GY
67
KSLTJA
189
OR-110C603-06
66
OR-404IP24
69
OR-854A00001
178
KSLVJA
189
OR-110C605-06
66
OR-404TJ2
34
OR-854B00000-1
176
MMC422434-00004
98
OR-110C607-06
66
OR-404TJ2X2
34
OR-8050F66M150
77
MMC422440-00005
98
OR-110C609-06
66
OR-404TJ2X2
182
OR-8050F157B
77
MMC422440-00006
98
OR-110C615-06
66
OR-404TJ4
34
OR-8050M66M150
77
MMC422446-00002
98
OR-110PBC6300
74
OR-404TJ6
34
OR-21109DA8FKIT
195
MMC422446-00003
98
OR-110PBC6900
74
OR-404TJ6
182
OR-21109DA8MKIT
195
MMC423234-0000A
98
OR-205KAN9EA-MM
179
OR-615SMFC-12P
156
OR-211015DA8FKIT
193
MMC423240-0000G
98
OR-205KAN9EA-SM
179
OR-615SMFC-24P
156
OR-211015DA8MKIT
195
MMC423240-0000H
98
OR-205KAN9FA-MM
179
OR-615SMFC-24P/S
156
OR-211025DA8FKIT
195
MMC423246-00007
98
OR-205KAN9FA-SM
179
OR-615SMFC-48P
156
OR-211025DA8MKIT
MMC423246-00008
98
OR-205KAN9GA-MM
179
OR-615SMFC-48P/S
156
OR-20500043
150, 157
MMC472440-00003
98
OR-205KAN9GA-SM
179
OR-615SMFC-96P
156
OR-20500236
175
MMC472440-00004
98
OR-205KAS9EA-09
175
OR-615SMFC-LX-12P
156
OR-20500237
174
MMC472446-00001
98
OR-205KAS9EA-50T
175
OR-625MMC-12PD1RB
152
OR-20500267
173
MMC472446-00002
98
OR-205KAS9EA-62
175
OR-625MMC-12PE1RB
152
OR-20500337
150
MMC473240-00003
98
OR-205KAS9FA-09
174
OR-625MMC-12PF1RB
152
OR-30200007
72
MMC473240-00004
98
OR-205KAS9FA-50T
174
OR-625MMC-24PD1RB
152
OR-30200020
74
MMC473246-00001
98
OR-205KAS9FA-62
174
OR-625MMC-24PE1RB
152
OR-30200022
72
MMC473246-00002
98
OR-205KAS9GA-09
173
OR-625MMC-24PF1RB
152
OR-30200024
74
OR-2-E1-25C-A
140
OR-205KAS9GA-50T
173
OR-625MMC-24PG1RB
152
OR-30200026
74
OR-2-E1-75
141
OR-205KAS9GA-62
173
OR-625MMC-24PL1RB
152
OR-30200095
74
OR-2-E2-TRPC
141
OR-403IPSS11
69
OR-625MMC-24PP1RB
152
OR-30200108
72
OR-110ABC5E050
72
OR-403IPSS12
69
OR-625MMC-48PD1B
152
OR-30200109
72
195
Part Number Index
COPPER
CONNECTIVITY
Part Number
Page
Part Number
Page
Part Number
OR-30200110
72
OR-40300555
182
OR-50900051-TL
OR-30200116
74
OR-40300575
35
OR-50900052
OR-30200132
75
OR-40300575-00
35
OR-30200139
73
OR-40300576
OR-30200140
73
OR-40300576-00
OR-30200143
72
OR-30200145
PHYSICAL
SUPPORT
OPTIMO
FIBER OPTIC
Page
TECHCHOICE
SOLUTIONS
ADAPTERS
Part Number
Page
125
OR-60400426
120
125
OR-60400517
88
OR-50900052-TL
125
OR-60400523
122
35
OR-60300123
177
OR-60400533
102, 126
35
OR-60300124
178
OR-60400538
88
OR-40300577
35
OR-60300125
177
OR-60400542
84
72
OR-40300577-00
35
OR-60300127
178
OR-60400550
123
OR-30203461
74
OR-40300590
30
OR-60300128
177
OR-60400551
123
OR-30203506
74
OR-40300591
30
OR-60300179
180
OR-60400575
123
OR-30203519
74
OR-40300620
32
OR-60300182
180
OR-60400606
123
OR-30600150
73
OR-40300630
189
OR-60300183
180
OR-60400614
84
OR-30600166
76
OR-40300633
35
OR-60300184
180
OR-60400655
88
OR-30600167
73
OR-40300633-00
35
OR-60300185
180
OR-60400681
125
OR-40300010
40
OR-40300745P-88
31
OR-60300186
180
OR-60400687
85
OR-40300061
40
OR-40300746P-88
31
OR-60300200
180
OR-60400968
155
OR-40300174
41, 52
OR-40700071
35
OR-60300203
176
OR-60401001
89
OR-40300185
40
OR-40700071-00
35
OR-60300204
176
OR-60401015
89
OR-40300185
182
OR-40700072
35
OR-60300205
178
OR-60401089
89
OR-40300185-13
40
OR-40700072-00
35
OR-60300210
177
OR-60950301
39
OR-40300186
40
OR-40700073
35
OR-60400005
126
OR-61500569-00
148
OR-40300186
182
OR-40700073-00
35
OR-60400010
132
OR-61500858
OR-40300255
33
OR-40800017
33
OR-60400013
126
OR-61500858
176
OR-40300256
33
OR-40800018
33
OR-60400017
84
OR-61500868
150, 157
OR-40300270
33
OR-40800019
33
OR-60400020
75
OR-61500868
176
OR-40300271
33
OR-41200010
39
OR-60400046
126
OR-62100001
39
OR-40300279P-88
31
OR-41200012
39
OR-60400054
121
OR-62100037
38
OR-40300460P-88
31
OR-41900017
33
OR-60400057
119
OR-62100038
38
OR-40300545
32
OR-41900018
33
OR-60400062
84
OR-62100038
181
OR-40300545
182
OR-42100002
36
OR-60400098
121
OR-62100041
38
OR-40300546
32
OR-42100009
39
OR-60400099
121
OR-62100041
181
OR-40300546
182
OR-42100009-00
35
OR-60400114
121
OR-62100044
38
OR-40300547
32
OR-42100018P-88
31
OR-60400129
120
OR-62100044
181
OR-40300547
182
OR-42100019P-88
31
OR-60400131
119
OR-62100045
38
OR-40300548
32
OR-42100022
30
OR-60400189
121
OR-62100045
181
OR-40300548
182
OR-42100051
30
OR-60400199
127
OR-62100046
38
OR-40300549
32
OR-42100052
30
OR-60400302
84
OR-62100046
181
OR-40300549
182
OR-42100053
30
OR-60400314
84
OR-62100047
38
OR-40300554
32
OR-42100054
35
OR-60400355
88
OR-62100047
181
OR-40300554
182
OR-42100054-00
35
OR-60400381
125
OR-62100048
38
OR-40300555
32
OR-50900051
125
OR-60400383
125
OR-62100048
181
150, 157
197
Part Number Index
198
COPPER
CONNECTIVITY
Part Number
PHYSICAL
SUPPORT
OPTIMO
FIBER OPTIC
Page
TECHCHOICE
SOLUTIONS
Part Number
ADAPTERS
Part Number
Page
Part Number
Page
OR-62100049
38
OR-63700083
36
OR-70700107-00
149
OR-806003246
Page
75
OR-62100049
181
OR-63700084
36
OR-70700126
88
OR-808000010
121
OR-62100050
38
OR-63700085
36
OR-70700143
127
OR-808004041
51
OR-62100050
181
OR-63700086
36
OR-70700144
127
OR-808004042
51
OR-62100051
38
OR-63700087
36
OR-70800158
150
OR-808004333
51
OR-62100051
181
OR-63730003
29
OR-70800205
127
OR-808004339
51
OR-62100052
38
OR-70400141
53
OR-70900020
40
OR-808004343
51
OR-62100052
181
OR-70400202
41
OR-70900020
182
OR-808004351
51
OR-62100053
38
OR-70400219
41
OR-70900022
40
OR-808004388
51
OR-62100053
181
OR-70400272
73
OR-70900022
182
OR-808004389
51
OR-62100054
181
OR-70400408
53
OR-70900070
182
OR-808004723
50
OR-62600002
157
OR-70400408-22
53
OR-71601671
178
OR-808004759
119
OR-62600003
157
OR-70400408-23
53
OR-85400010
180
OR-808004818
119
OR-63700005
29
OR-70400408-24
53
OR-85400011
180
OR-808004867
119
OR-63700006
36
OR-70400408-25
53
OR-85400012
180
OR-808004920
50
OR-63700011
183
OR-70400408-26
53
OR-302003251
73
OR-808004921
50
OR-63700013
183
OR-70400409
53
OR-302003253
73
OR-808004940
50
OR-63700017
183
OR-70400409-22
53
OR-302003282
73
OR-808004941
50
OR-63700021
36
OR-70400409-24
53
OR-401004788
124
OR-808004942
50
OR-63700023
36
OR-70400409-26
53
OR-401004789
124
OR-808004943
50
OR-63700025
36
OR-70400411
41
OR-401004790
124
OR-808044253
50
OR-63700026
183
OR-70400411-22
41
OR-401004791
124
OR-808044508
121
OR-63700039
183
OR-70400411-24
41
OR-401045289
49
OR-808044549
121
OR-63700046
36
OR-70400411-26
41
OR-401045290
49
OR-808044855
119
OR-63700047
36
OR-70400638
53
OR-401045291
49
OR-808044915
120
OR-63700048
183
OR-70400644
53
OR-401045292
49
OR-808044916
120
OR-63700050
183
OR-70400646
73
OR-401045773
124
OR-808045030
121
OR-63700051
183
OR-70400659
53
OR-604004600
90
OR-808045590
119
OR-63700058
36
OR-70400680
73
OR-604044927
123
OR-808045768
119
OR-63700059
36
OR-70400691
53
OR-604045108
125
OR-867045187
52
OR-63700060
36
OR-70400692
53
OR-604045109
125
OR-AJCA
133
OR-63700066
183
OR-70400789
53
OR-604045110
125
OR-AJCA8
133
OR-63700069
36
OR-70400790
53
OR-604045111
125
OR-AJCC
133
OR-63700070
36
OR-70600021
180
OR-604045112
125
OR-AJCC8
133
OR-63700071
36
OR-70600022
180
OR-604045681
88
OR-BCGFM3X9
108
OR-63700075
183
OR-70700070
40
OR-805003202
77
OR-BCGFMC3X9
108
OR-63700078
183
OR-70700079
127
OR-806003194
75
OR-BCGFME5X7
108
OR-63700080
183
OR-70700080
127
OR-806003196
75
OR-BCGSM6X7
108
OR-63700081
183
OR-70700084-00
127
OR-806003197
75
OR-BFPA-1RU
124
OR-63700082
183
OR-70700107-00
127
OR-806003199
75
OR-BFPA-2RU
124
Part Number Index
Part Number
COPPER
CONNECTIVITY
Page
PHYSICAL
SUPPORT
Part Number
OPTIMO
FIBER OPTIC
Page
TECHCHOICE
SOLUTIONS
Part Number
ADAPTERS
Part Number
Page
OR-BFPC-1RU
124
OR-EC04U-S
193
OR-EUCN47U66
92
OR-EUCSVML47U
Page
95
OR-BFPT-1RU-10
124
OR-ECDL001
151
OR-EUCN47U68
92
OR-EUCWCAS
96
OR-BFPT-2RU-10
124
OR-ECDL002
151
OR-EUCN47U88
92
OR-EUCWF7U45
93
OR-CF-6B
138
OR-ES-19-FMB
122
OR-EUCNCAS
96
OR-EUCWF7U56
93
OR-CF-6D
138
OR-ES-19-MCSB
122
OR-EUCNDRAW3U
96
OR-EUCWF9U45
93
OR-CF-12B
138
OR-ES-23-FMB
122
OR-EUCNFANT2
95
OR-EUCWF9U56
93
OR-CF-12D
138
OR-ESV-19-FMB
122
OR-EUCNFANT4
95
OR-EUCWF12U45
93
OR-CFTRC-6
138
OR-ESV-23-FMB
122
OR-EUCNKDRAW1U
96
OR-EUCWF12U56
93
OR-CFTRC-6B
138
OR-EUCBASE66
96
OR-EUCNLIGHT
96
OR-EUCWF16U45
93
OR-CFTRC-12
138
OR-EUCBASE68
96
OR-EUCNVML32U
95
OR-EUCWF16U56
93
OR-CFTRC-12B
138
OR-EUCBASE88
96
OR-EUCNVML36U
95
OR-EUCWF20U45
93
OR-CL2LB2A
131
OR-EUCBAY
96
OR-EUCNVML47U
95
OR-EUCWF20U56
93
OR-CL2LB2C
131
OR-EUCBP1U
96
OR-EUCPS6S
96
OR-EUCWFANT1
95
OR-CL2LB6A
131
OR-EUCBP2U
96
OR-EUCRMFANT1U2
95
OR-EUCWFANT2
95
OR-CL2LB6B
131
OR-EUCBP3U
96
OR-EUCRMFANT1U4
95
OR-EUCWPF7U61
93
OR-CL2LB6C
131
OR-EUCBP4U
96
OR-EUCS26U610
93
OR-EUCWPF9U61
92
OR-CL2LB10C
131
OR-EUCBP5U
96
OR-EUCS36U610
93
OR-EUCWPF12U61
93
OR-CL2LB20C
131
OR-EUCBP6U
96
OR-EUCS42U610
93
OR-EUCWPF16U61
93
OR-CL2LB30C
131
OR-EUCBPV1U
96
OR-EUCS42U810
93
OR-FC01U-C
147
OR-CL2LB40C
131
OR-EUCBPV2U
96
OR-EUCS47U610
93
OR-FC01U-M
145
OR-CMBFR0RU
126
OR-EUCCMP1U
95
OR-EUCS47U810
93
OR-FC01U-P
146
OR-COTL28
132
OR-EUCCMPCH1U
95
OR-EUCSFANT4
95
OR-FC01U-S
148
OR-COTL614
132
OR-EUCCMR
95
OR-EUCSFANT6
95
OR-FC02U-C
147
OR-COTL1014
132
OR-EUCCN20
96
OR-EUCSHELFF10
94
OR-FC02U-M
145
OR-CTHD220
131
OR-EUCCN50
96
OR-EUCSHELFF60
94
OR-FC02U-P
146
OR-CTHD2222
131
OR-EUCGKECB
96
OR-EUCSHELFF80
94
OR-FC02U-S
148
OR-CTHD2248
131
OR-EUCLIGHT
96
OR-EUCSHELFFSB35
94
OR-FC03U-C
147
OR-CTHD4446
131
OR-EUCN22U66
92
OR-EUCSHELFFSB45
94
OR-FC03U-M
145
OR-CTHD4666
131
OR-EUCN22U68
92
OR-EUCSHELFFSB55
94
OR-FC03U-P
146
OR-DB25HDFF
195
OR-EUCN26U66
92
OR-EUCSHELFFSB65
94
OR-FC03U-S
148
OR-DB25HDMM
195
OR-EUCN26U68
92
OR-EUCSHELFRM25
94
OR-FC04U-C
147
OR-DVMS704
90
OR-EUCN32U66
92
OR-EUCSHELFRM30
94
OR-FC04U-M
145
OR-DVMS706
90
OR-EUCN32U68
92
OR-EUCSHELFRM35
94
OR-FC04U-P
146
OR-DVMS804
90
OR-EUCN32U88
92
OR-EUCSHELFS10
94
OR-FC04U-S
148
OR-DVMS806
90
OR-EUCN36U66
92
OR-EUCSHELFS60
94
OR-FCBL-002
149
OR-EC01U-C
193
OR-EUCN36U68
92
OR-EUCSHELFS80
94
OR-FCBR-001
149
OR-EC02U-C
193
OR-EUCN36U88
92
OR-EUCSSR10
95
OR-FCBR-002
149
OR-EC02U-S
193
OR-EUCN42U66
92
OR-EUCSSR60
96
OR-FCBR-003
149
OR-EC03U-C
193
OR-EUCN42U68
92
OR-EUCSSR80
96
OR-FCTL-001
149
OR-EC04U-C
193
OR-EUCN42U88
92
OR-EUCSVML42U
95
OR-FCWK-01
151
199
Part Number Index
200
Part Number
Page
Part Number
OR-FPIK2PJ
30
OR-IPC5E015-00
OR-FPIK2TJ
30
OR-IPC5E020-00
OR-FPK1PJ
30
OR-FPK1TJ
COPPER
CONNECTIVITY
Page
PHYSICAL
SUPPORT
OPTIMO
FIBER OPTIC
TECHCHOICE
SOLUTIONS
ADAPTERS
Part Number
Page
Part Number
Page
69
OR-KSFP1
188
OR-KSSS3
188
69
OR-KSFP2
188
OR-KSSS4
188
OR-IPC5E025-00
69
OR-KSFP3
188
OR-KSSS6
188
30
OR-IPC603-00
69
OR-KSFP4
188
OR-KSSS8
188
OR-FPK2PJ
30
OR-IPC605-00
69
OR-KSFP4V110
188
OR-KSSS12
188
OR-FPK2TJ
30
OR-IPC607-00
69
OR-KSFP4VFT
188
OR-KSST
186
OR-FST2-F012
150
OR-IPC6010-00
69
OR-KSFP6
188
OR-KSSV
37
OR-FST3-F048
150
OR-IPC6015-00
69
OR-KSFP8
188
OR-KSSV
187
OR-GB2X10TGB
129
OR-IPC6020-00
69
OR-KSFP8V110
188
OR-KSSVIDC
37
OR-GB2X12TGB
129
OR-IPC6025-00
69
OR-KSFP8VFT
188
OR-KSSVIDC
187
OR-GB2X12TGBKIT
129
OR-IPJ5E
69
OR-KSFP12
188
OR-KSUSBAA
37
OR-GB4X12J
129
OR-IPJ6
69
OR-KSFPR1
188
OR-KSUSBAA
187
OR-GB4X12TMGB
128
OR-JP5E6U
39
OR-KSFPR2
188
OR-KSUSBAB
37
OR-GB4X12TMGBKIT
128
OR-JP66U
39
OR-KSFPR3
188
OR-KSUSBAB
187
OR-GB4X20J
129
OR-KS5E
186
OR-KSFPR4
188
OR-KTF-19-DR
123
OR-GB4X20TMGB
128
OR-KS5EA
186
OR-KSFPR6
188
OR-KTR19-DR
123
OR-GB4X20TMGBKIT
128
OR-KS6
186
OR-KSHDMI
37
OR-M2LCD12-09
160
OR-GBH19KIT
130
OR-KS6A
186
OR-KSHDMI
187
OR-M2LCD12-50E
160
OR-GBV36
130
OR-KS14ST
37
OR-KSICON
186
OR-M2LCQ24-09
160
OR-GBV36KIT
130
OR-KS14ST
187
OR-KSLC
186
OR-M2LCQ24-50E
160
OR-GBV72
130
OR-KS35ST
37
OR-KSMTRJ
186
OR-M2LCQ24-50E3A1
160
OR-GBV72KIT
130
OR-KS35ST
187
OR-KSRCAB
37
OR-M2SCD12-09
160
OR-GBWMBKIT
129
OR-KS35STST
37
OR-KSRCAB
187
OR-M2SCD12-50E
160
OR-GJ8KIT
132
OR-KS35STST
187
OR-KSRCABL
37
OR-M4LCQ24-09
160
OR-GL2014
132
OR-KS106S2
188
OR-KSRCABL
187
OR-M4LCQ24-50E
160
OR-GS-8
136
OR-KS106S4
188
OR-KSRCAG
37
OR-M4LCQ24-50EA3A1
160
OR-HDFP-BLANK
161
OR-KSB10
37
OR-KSRCAG
187
OR-M4LCQ24-62
160
OR-HDFP-LCQ24AC
161
OR-KSB10
187
OR-KSRCAR
37
OR-MC5E03-06
62
OR-HDFP-LCQ24LC
161
OR-KSBNC
37
OR-KSRCAR
187
OR-MC5E05-06
62
OR-HDFP-LCQ24MB
161
OR-KSBNC
187
OR-KSRCAW
37
OR-MC5E07-06
62
OR-HDFP-MPA72CA
161
OR-KSBNC75
37
OR-KSRCAW
187
OR-MC5E09-06
62
OR-HDFP-MPA72LA
161
OR-KSBNC75
187
OR-KSRCAY
37
OR-MC5E15-06
62
OR-HDFP-MPA72MA
161
OR-KSBP
37
OR-KSRCAY
187
OR-MC5E20-06
62
OR-HDJ5E
47
OR-KSBP
187
OR-KSRJ25
186
OR-MC5E25-06
62
OR-HDJ6
47
OR-KSDS2
188
OR-KSRJ25A
186
OR-MC18B5E03-06
66
OR-HDJ6A
47
OR-KSDS3
188
OR-KSSC
186
OR-MC18B5E05-06
66
OR-HDJHCT
47
OR-KSDS4
188
OR-KSSMB2
192
OR-MC18B5E07-06
66
OR-IPC5E03-00
69
OR-KSFCN
37
OR-KSSMB4
192
OR-MC18B5E09-06
66
OR-IPC5E05-00
69
OR-KSFCN
187
OR-KSSMB6
192
OR-MC18B5E15-06
66
OR-IPC5E07-00
69
OR-KSFCNR
37
OR-KSSS1
188
OR-MC18B603-06
66
OR-IPC5E010-00
69
OR-KSFCNR
187
OR-KSSS2
188
OR-MC18B605-06
66
Part Number Index
Part Number
COPPER
CONNECTIVITY
Page
PHYSICAL
SUPPORT
Part Number
OPTIMO
FIBER OPTIC
Page
TECHCHOICE
SOLUTIONS
ADAPTERS
Part Number
Page
Part Number
Page
OR-MC18B607-06
66
OR-MCSZ610M-08
65
OR-MM6CRB16
85
OR-MM10CRBRSVR
85
OR-MC18B609-06
66
OR-MCSZ615M-08
65
OR-MM6CT4RU
86
OR-MM10CRBSVR
85
OR-MC18B615-06
66
OR-MCSZ620M-08
65
OR-MM6CT4RUK
86
OR-MM10EPN730
86
OR-MC603-06
62
OR-MCSZ630M-08
65
OR-MM6EP706
86
OR-MM10EPS
86
OR-MC605-06
62
OR-MCSZ650M-08
65
OR-MM6EP710
86
OR-MM10VDA7244
81
OR-MC607-06
62
OR-MCSZ680M-08
65
OR-MM6EP716
86
OR-MM10VDA7248
81
OR-MC609-06
62
OR-MCSZ1010M-04
65
OR-MM6EP810
86
OR-MM10VDA8244
81
OR-MC615-06
62
OR-MCSZ1020M-04
65
OR-MM6EP816
86
OR-MM10VDA8248
81
OR-MC620-06
62
OR-MCSZ1030M-04
65
OR-MM6EPN706
86
OR-MM10VMD712
81
OR-MC625-06
62
OR-MCSZ1050M-04
65
OR-MM6EPN710
86
OR-MM10VMD716
81
OR-MC61003-09
63
OR-MCT810
132
OR-MM6EPN716
86
OR-MM10VMD812
81
OR-MC61005-09
63
OR-MCT840
132
OR-MM6EPN810
86
OR-MM10VMD816
81
OR-MC61007-09
63
OR-MCZ5E03-06
62
OR-MM6EPN816
86
OR-MM10WFE
84
OR-MC61009-09
63
OR-MCZ5E05-06
62
OR-MM6HM6D2RU
87
OR-MM107SVR
80
OR-MC61015-09
63
OR-MCZ5E07-06
62
OR-MM6HM61RU
87
OR-MM107SVRABR
80
OR-MC61020-09
63
OR-MCZ5E09-06
62
OR-MM6HM62RU
87
OR-MM108SVR
80
OR-MC61025-09
63
OR-MCZ5E15-06
62
OR-MM6HM81RU
87
OR-MM6706
82
OR-MCS5E03-08
64
OR-MCZ5E20-06
62
OR-MM6HM82RU
87
OR-MM6710
82
OR-MCS5E05-08
64
OR-MCZ5E25-06
62
OR-MM6HMF1RU
87
OR-MM6716
82
OR-MCS5E07-08
64
OR-MCZ603-06
62
OR-MM6HMF2RU
87
OR-MM6810
82
OR-MCS5E09-08
64
OR-MCZ605-06
62
OR-MM6HMF4RU
87
OR-MM6816
82
OR-MCS5E15-08
64
OR-MCZ607-06
62
OR-MM6VMD706
83
OR-MM10716
80
OR-MCS5E25-08
64
OR-MCZ609-06
62
OR-MM6VMD710
83
OR-MM10816
80
OR-MCS6A03-08
64
OR-MCZ615-06
62
OR-MM6VMD806
83
OR-MM67110D
76
OR-MCS6A05-08
64
OR-MCZ620-06
62
OR-MM6VMD810
83
OR-MM1070206VCT
82
OR-MCS6A07-08
64
OR-MCZ625-06
62
OR-MM6VML704
76
OR-MM1080206VCT
82
OR-MCS6A09-08
64
OR-MM6BDC06
85
OR-MM6VML704
83
OR-MMABTH802424
115
OR-MCS6A15-08
64
OR-MM6BDC10
85
OR-MM6VML706
76
OR-MMABTH802424-B
115
OR-MCS6A25-08
64
OR-MM6BDC16
85
OR-MM6VML706
83
OR-MMABTH804824
115
OR-MCS603-08
64
OR-MM6BLC
84, 102
OR-MM6VMS704
83
OR-MMABTH804824-B
115
OR-MCS605-08
64
OR-MM6CBL06
85
OR-MM6VMS706
83
OR-MMABTH807224
115
OR-MCS607-08
64
OR-MM6CBL10
85
OR-MM6VMS804
83
OR-MMABTH807224-B
115
OR-MCS609-08
64
OR-MM6CBL16
85
OR-MM6VMS806
83
OR-MMACAP60X30
111
OR-MCS615-08
64
OR-MM6CEK06
86
OR-MM10AB71612
81
OR-MMACAP84X30
111
OR-MCS625-08
64
OR-MM6CEK10
86
OR-MM10AB71616
81
OR-MMACNCP29X12
113
OR-MCSZ5E10M-08
65
OR-MM6CEK16
86
OR-MM10AB73012
81
OR-MMACNCP56X12
113
OR-MCSZ5E15M-08
65
OR-MM6CMS6
84
OR-MM10AB73016
81
OR-MMACNCP98X12
113
OR-MCSZ5E20M-08
65
OR-MM6CMS8
84
OR-MM10AB81612
81
OR-MMACNCP110X12
113
OR-MCSZ5E30M-08
65
OR-MM6CMS10
84
OR-MM10AB81616
81
OR-MMACNCP122X12
113
OR-MCSZ5E50M-08
65
OR-MM6CRB06
85
OR-MM10AB83012
81
OR-MMACNCP146X12
113
OR-MCSZ5E80M-08
65
OR-MM6CRB10
85
OR-MM10AB83016
81
OR-MMACNCP182X12
113
201
Part Number Index
202
Part Number
COPPER
CONNECTIVITY
Page
PHYSICAL
SUPPORT
Part Number
OPTIMO
FIBER OPTIC
Page
TECHCHOICE
SOLUTIONS
Part Number
ADAPTERS
Part Number
Page
Page
OR-MMACNP29X12
112
OR-MMACNS122X36
113
OR-MMAPL1224
115
OR-MMCCRMB4706-B
102
OR-MMACNP29X24
112
OR-MMACNS122X48
113
OR-MMAPL1414
115
OR-MMCCSS1-1912
103
OR-MMACNP29X36
112
OR-MMACNS122X60
113
OR-MMAPL1616
115
OR-MMCCSS2-1915
103
OR-MMACNP29X48
112
OR-MMACNS122X72
113
OR-MMAPL1620
115
OR-MMCCSS3-1915
103
OR-MMACNP29X60
112
OR-MMACNS146X12
113
OR-MMAPL1624
115
OR-MMCCSV1-1912
103
OR-MMACNP29X72
112
OR-MMACNS146X24
113
OR-MMAPL1818
115
OR-MMCCSV2-1915
103
OR-MMACNP56X12
112
OR-MMACNS146X36
113
OR-MMAPL2024
115
OR-MMCCSV3-1915
103
OR-MMACNP56X24
112
OR-MMACNS146X48
113
OR-MMAPL2424
115
OR-MMCCTMB06-B
101
OR-MMACNP56X36
112
OR-MMACNS146X60
113
OR-MMC24VPMLD
100
OR-MMCCTMB12-B
101
OR-MMACNP56X48
112
OR-MMACNS146X72
113
OR-MMC24VPMLS
100
OR-MMCCTMB18-B
101
OR-MMACNP56X60
112
OR-MMACNS182X12
113
OR-MMC42VPMLD
100
OR-MMCCTMB4706-B
101
OR-MMACNP56X72
112
OR-MMACNS182X24
113
OR-MMC42VPMLS
100
OR-MMCCTMB4712-B
101, 102
OR-MMACNP98X12
112
OR-MMACNS182X36
113
OR-MMC47VPMLD
100
OR-MMCCTMB4718-B
101, 102
OR-MMACNP98X24
112
OR-MMACNS182X48
113
OR-MMC47VPMLS
100
OR-MMCCTMB4724-B
102
OR-MMACNP98X48
112
OR-MMACNS182X60
113
OR-MMC243UCTPB-B
101
OR-MMCDR2-1915
103
OR-MMACNP110X12
112
OR-MMACNS182X72
113
OR-MMC323UCTPB-B
101
OR-MMCDR4-1915
103
OR-MMACNP110X24
112
OR-MMADIS0624
116
OR-MMC2406CTCE-B
101
OR-MMCFAN-4-50
109
OR-MMACNP110X48
112
OR-MMADIS1224
116
OR-MMC2412CTCE-B
101
OR-MMCFAN-6
104
OR-MMACNP122X12
112
OR-MMADIS1824
116
OR-MMC2418CTCE-B
101
OR-MMCFAN-6-2
104
OR-MMACNP122X24
112
OR-MMADIS2424
116
OR-MMC3206CTCE-B
101
OR-MMCFANP19-4-2
103
OR-MMACNP122X48
112
OR-MMADRF80X24
114
OR-MMC3212CTCE-B
101
OR-MMCFPS-1-B
103
OR-MMACNP146X12
112
OR-MMADRF80X24-B
114
OR-MMC3218CTCE-B
101
OR-MMCFPS-2-B
103
OR-MMACNP146X24
112
OR-MMADRH80X56LH
114
OR-MMC4232ADK
104
OR-MMCFPS-3-B
103
OR-MMACNP146X48
112
OR-MMADRH80X56LH-B
114
OR-MMC4732ADK
104
OR-MMCFPS-4-B
103
OR-MMACNP182X12
112
OR-MMADRH80X56RH
114
OR-MMC420206VCT
100
OR-MMCFPS-5-B
103
OR-MMACNP182X24
112
OR-MMADRH80X56RH-B
114
OR-MMC423240-0001J
99
OR-MMCFPS-6-B
103
OR-MMACNP182X48
112
OR-MMADRS80X89DL
114
OR-MMC423246-00016
99
OR-MMCFPT-1-B
103
OR-MMACNS98X12
113
OR-MMADRS80X89DL-B
114
OR-MMC470206VCT
100
OR-MMCFPT-2-B
103
OR-MMACNS98X24
113
OR-MMAGCT2424
117
OR-MMC473240-0000L
99
OR-MMCFPT-3-B
103
OR-MMACNS98X36
113
OR-MMAGCT2448
117
OR-MMC473246-0000H
99
OR-MMCFPT-4-B
103
OR-MMACNS98X48
113
OR-MMAPL0404
115
OR-MMCAB421612
104
OR-MMCFPT-8-B
103
OR-MMACNS98X60
113
OR-MMAPL0606
115
OR-MMCAB421632SA
104
OR-MMCFSV-1926
103
OR-MMACNS98X72
113
OR-MMAPL0612
115
OR-MMCAB423012
104
OR-MMCISOB-38
103
OR-MMACNS110X12
113
OR-MMAPL0618
115
OR-MMCAB471612
104
OR-MMCISOB-50
103
OR-MMACNS110X24
113
OR-MMAPL0624
115
OR-MMCAB471632SA
104
OR-MMCLVL-IP
103
OR-MMACNS110X36
113
OR-MMAPL0909
115
OR-MMCAB473012
104
OR-MMCMBK
102
OR-MMACNS110X48
113
OR-MMAPL0914
115
OR-MMCCNTOOL
102
OR-MMCPB11510-01
105
OR-MMACNS110X60
113
OR-MMAPL0918
115
OR-MMCCRMB06-B
102
OR-MMCPB11518-01
105
OR-MMACNS110X72
113
OR-MMAPL0924
115
OR-MMCCRMB12-B
102
OR-MMCPB11524-01
105
OR-MMACNS122X12
113
OR-MMAPL1212
115
OR-MMCCRMB18-B
102
OR-MMCPB12010-01
105
OR-MMACNS122X24
113
OR-MMAPL1218
115
OR-MMCCRMB24-B
102
OR-MMCPB12018-01
105
Part Number Index
Part Number
Page
Part Number
COPPER
CONNECTIVITY
Page
PHYSICAL
SUPPORT
Part Number
OPTIMO
FIBER OPTIC
Page
TECHCHOICE
SOLUTIONS
ADAPTERS
Part Number
Page
OR-MMCPB12024-01
105
OR-MMW192426S-B
109
OR-OFP-STS06NB
162
OR-P1DC6IPUZUZ001M
163
OR-MMCPB13016-01
105
OR-MMW262420P-B
109
OR-OFP-STS06NC
162
OR-P1DC6IPUZUZ002M
163
OR-MMCPB13024-01
105
OR-MMW262420S-B
109
OR-P1DA2BLFZFZ001M
166
OR-P1DC6IPUZUZ003M
163
OR-MMCPB22012-01
105
OR-MMW262426P-B
109
OR-P1DA2BLFZFZ002M
166
OR-P1DF2LLFZFZ001M
166
OR-MMCPB22018-01
105
OR-MMW262426S-B
109
OR-P1DA2BLFZFZ003M
166
OR-P1DF2LLFZFZ002M
166
OR-MMCPB22024-01
105
OR-MMWBPK
109
OR-P1DA2BLFZGZ001M
166
OR-P1DF2LLFZFZ003M
166
OR-MMCPB23016-01
105
OR-MMWHMBM12-B
109
OR-P1DA2BLFZGZ002M
166
OR-P1DF2LLFZGZ001M
166
OR-MMCPB23024-01
105
OR-OFP-BLANK
162
OR-P1DA2BLFZGZ003M
166
OR-P1DF2LLFZGZ002M
166
OR-MMCPB23024-02
105
OR-OFP-LCD12AC
161
OR-P1DA2BLGZGZ001M
166
OR-P1DF2LLFZGZ003M
166
OR-MMCPM12010-01
106
OR-OFP-LCD12LC
161
OR-P1DA2BLGZGZ002M
166
OR-P1DF2LLGZGZ001M
166
OR-MMCPM12018-01
106
OR-OFP-LCD12MB
161
OR-P1DA2BLGZGZ003M
166
OR-P1DF2LLGZGZ002M
166
OR-MMCPM12024-01
106
OR-OFP-LCQ24AC
161
OR-P1DA2BRFZFZ001M
165
OR-P1DF2LLGZGZ003M
166
OR-MMCPM13016-01
106
OR-OFP-LCQ24LC
161
OR-P1DA2BRFZFZ002M
165
OR-P1DF2LRFZFZ001M
165
OR-MMCPM13024-01
106
OR-OFP-LCQ24MB
161
OR-P1DA2BRFZFZ003M
165
OR-P1DF2LRFZFZ002M
165
OR-MMCPM22012-01
106
OR-OFP-MPA72CA
161
OR-P1DA2BRFZGZ001M
165
OR-P1DF2LRFZFZ003M
165
OR-MMCPM22018-01
106
OR-OFP-MPA72LA
161
OR-P1DA2BRFZGZ002M
165
OR-P1DF2LRFZGZ001M
165
OR-MMCPM22024-01
106
OR-OFP-MPA72MA
161
OR-P1DA2BRFZGZ003M
165
OR-P1DF2LRFZGZ002M
165
OR-MMCPM23016-01
106
OR-OFP-MPA96CA
161
OR-P1DA2BRGZGZ001M
165
OR-P1DF2LRFZGZ003M
165
OR-MMCPM23024-01
106
OR-OFP-MPA96LA
161
OR-P1DA2BRGZGZ002M
165
OR-P1DF2LRGZGZ001M
165
OR-MMCPM23024-02
106
OR-OFP-MPA96MA
161
OR-P1DA2BRGZGZ003M
165
OR-P1DF2LRGZGZ002M
165
OR-MMCRULBL-60-A
102
OR-OFP-MTD12AA
162
OR-P1DA6BPAZAZ001M
163
OR-P1DF2LRGZGZ003M
165
OR-MMCSSVH-1930
103
OR-OFP-MTD12LA
162
OR-P1DA6BPAZAZ002M
163
OR-P1DF6LPAZAZ001M
163
OR-MMCSSVL-1924
103
OR-OFP-MTD12MA
162
OR-P1DA6BPAZAZ003M
163
OR-P1DF6LPAZAZ002M
163
OR-MMCSSVM-1924
103
OR-OFP-SCD06AC
162
OR-P1DC2ILRZRZ001M
166
OR-P1DF6LPAZAZ003M
163
ORMMCUN-1420-10
102
OR-OFP-SCD06LC
162
OR-P1DC2ILRZRZ002M
166
OR-P1PA9FRFZZZ001M
168
OR-MMIPK
86
OR-OFP-SCD06MB
162
OR-P1DC2ILRZRZ003M
166
OR-P1PA9FRFZZZ002M
168
OR-MMPDUMBT
85
OR-OFP-SCD08AC
162
OR-P1DC2ILRZSZ001M
166
OR-P1PA9FRGZZZ001M
168
OR-MMTECFCBP
89
OR-OFP-SCD08LC
162
OR-P1DC2ILRZSZ002M
166
OR-P1PA9FRGZZZ002M
168
OR-MMTECFSP
89
OR-OFP-SCD08MB
162
OR-P1DC2ILRZSZ003M
166
OR-P1PC9FRRZZZ001M
168
OR-MMTECSG22
89
OR-OFP-SCD12AC
162
OR-P1DC2ILSZSZ001M
166
OR-P1PC9FRRZZZ002M
168
OR-MMTEHMR2RU
89
OR-OFP-SCD12LC
162
OR-P1DC2ILSZSZ002M
166
OR-P1PC9FRSZZZ001M
168
OR-MMW12M12-B
109
OR-OFP-SCD12MB
162
OR-P1DC2ILSZSZ003M
166
OR-P1PC9FRSZZZ002M
168
OR-MMW19M12-B
109
OR-OFP-SCS06AC
162
OR-P1DC2IRRZRZ001M
165
OR-P1PF9FRFZZZ001M
168
OR-MMW26M12-B
109
OR-OFP-SCS06LC
162
OR-P1DC2IRRZRZ002M
165
OR-P1PF9FRFZZZ002M
168
OR-MMW122420P-B
109
OR-OFP-SCS06MB
162
OR-P1DC2IRRZRZ003M
165
OR-P1PF9FRGZZZ001M
168
OR-MMW122420S-B
109
OR-OFP-STD08AC
162
OR-P1DC2IRRZSZ001M
165
OR-P1PF9FRGZZZ002M
168
OR-MMW122426P-B
109
OR-OFP-STD08LC
162
OR-P1DC2IRRZSZ002M
165
OR-P1RA6BPAZAZ001M
163
OR-MMW122426S-B
109
OR-OFP-STD08MB
162
OR-P1DC2IRRZSZ003M
165
OR-P1RA6BPAZAZ002M
163
OR-MMW192420P-B
109
OR-OFP-STD12AC
162
OR-P1DC2IRSZSZ001M
165
OR-P1RA6BPAZAZ003M
163
OR-MMW192420S-B
109
OR-OFP-STD12LC
162
OR-P1DC2IRSZSZ002M
165
OR-P1RC6IPUZUZ001M
163
OR-MMW192426P-B
109
OR-OFP-STD12MB
162
OR-P1DC2IRSZSZ003M
165
OR-P1RC6IPUZUZ002M
163
203
Part Number Index
Part Number
Part Number
Page
PHYSICAL
SUPPORT
OPTIMO
FIBER OPTIC
Part Number
Page
TECHCHOICE
SOLUTIONS
Part Number
ADAPTERS
Page
OR-P1RC6IPUZUZ003M
163
OR-P3DF2LRFZFZ001M
164
OR-P413530H-TB
136
OR-PHAPJU72
48
OR-P1RF6LPAZAZ001M
163
OR-P3DF2LRFZFZ002M
164
OR-P413530H-TD
136
OR-PHASJU24
58
OR-P1RF6LPAZAZ002M
163
OR-P3DF2LRFZFZ003M
164
OR-P413531H-TB
136
OR-PHASJU48
58
OR-P1RF6LPAZAZ003M
163
OR-P3DF2LRFZGZ001M
164
OR-P413531H-TD
136
OR-PHATKS6A24
51
OR-P1SA4ZLFZZZ001M
169
OR-P3DF2LRFZGZ002M
164
OR-P429503H
140
OR-PHATKS6A48
51
169
OR-P3DF2LRFZGZ003M
164
OR-P820127H
137
OR-PHATKSU24
52
169
OR-P3DF2LRGZGZ001M
164
OR-P820127HA
137
OR-PHATKSU48
52
169
OR-P3DF2LRGZGZ002M
164
OR-P820147H
137
OR-PHC5E6U24
46
168
OR-P3DF2LRGZGZ003M
164
OR-P820287H
137
OR-PHC5E6U48
46
168
OR-P3DF6LPAZAZ001M
163
OR-P820327H
137
OR-PHC6AU24
44
168
OR-P3DF6LPAZAZ002M
163
OR-P820367H
137
OR-PHC6AU48
44
168
OR-P3DF6LPAZAZ003M
163
OR-P820477H
140
OR-PHC66U24
46
169
OR-P3PF9FRFZZZ001M
167
OR-P820527H
138
OR-PHC66U48
46
169
OR-P3PF9FRFZZZ002M
167
OR-P820527HB
138
OR-PHD5E6U24
45
169
OR-P3PF9FRGZZZ001M
167
OR-P820547H
140
OR-PHD5E6U24HM
48
169
OR-P3PF9FRGZZZ002M
167
OR-P820667HB
140
OR-PHD5E6U48
45
168
OR-P3RF6LPAZAZ001M
163
OR-P820667HD
140
OR-PHD5E6U48HM
48
168
OR-P3RF6LPAZAZ002M
163
OR-P820677HB
140
OR-PHD5E6U96
45
168
OR-P3RF6LPAZAZ003M
163
OR-P820677HD
140
OR-PHD5E8U24
45
168
OR-P3SF4ZRFZZZ001M
167
OR-P820827H
138
OR-PHD5E8U48
45
169
OR-P3SF4ZRFZZZ002M
167
OR-P820827HB
138
OR-PHD5E8U96
45
169
OR-P3SF4ZRGZZZ001M
167
OR-P982078HB
140
OR-PHD5E2124
50
169
OR-P3SF4ZRGZZZ002M
167
OR-P982078HD
140
OR-PHD5E2148
50
169
OR-P3TF4ZRFZZZ001M
167
OR-P987523H
141
OR-PHD5EFF24
50
168
OR-P3TF4ZRFZZZ002M
167
OR-P987524H
141
OR-PHD6AU24
44
168
OR-P3TF4ZRGZZZ001M
167
OR-P987525H
141
OR-PHD6AU48
44
168
OR-P3TF4ZRGZZZ002M
167
OR-P987526H
141
OR-PHD6FF24
50
168
OR-P128040HB
139
OR-P987527H
141
OR-PHD66U24
45
169
OR-P128040HD
139
OR-P987528H
141
OR-PHD66U24HM
48
169
OR-P128240HB
139
OR-P987529H
141
OR-PHD66U48
45
169
OR-P128240HD
139
OR-P987645H
141
OR-PHD66U48HM
48
169
OR-P128440HB
139
OR-P987649H
141
OR-PHD66U96
45
168
OR-P128440HD
139
OR-P987650H
141
OR-PHD68U24
45
168
OR-P128640HB
139
OR-PCU56
133
OR-PHD68U48
45
168
OR-P128640HD
139
OR-PCU152
133
OR-PHD68U96
45
168
OR-P139240HB
138
OR-PCU253
133
OR-PHDHJU24
47
169
OR-P139240HD
138
OR-PCU354
133
OR-PHDHJU48
47
OR-P1TC4ZLRZZZ0002M
169
OR-P139340HB
138
OR-PCU575
133
OR-PHDHJU72
47
OR-P1TC4ZLSZZZ0001M
169
OR-P139340HD
138
OR-PCU1125
133
OR-PHDPJS5E24
51
OR-P1TC4ZLSZZZ0002M
169
OR-P139540HB
138
OR-PHA5E6U24
46
OR-PHDPJS6A24
51
OR-P1TC4ZRRZZZ001M
168
OR-P139540HD
138
OR-PHA5E6U48
46
OR-PHDPJU24
48
OR-P1TC4ZRRZZZ002M
168
OR-P139740HB
138
OR-PHA5E2124
50
OR-PHDPJU48
48
OR-P1TC4ZRSZZZ001M
168
OR-P139740HD
138
OR-PHA5E2148
50
OR-PHDPJU72
48
OR-P1TC4ZRSZZZ002M
168
OR-P400298HB
140
OR-PHA6AU24
44
OR-PHDSJU24
58
OR-P1TF4ZLFZZZ0001M
169
OR-P400298HD
140
OR-PHA6AU48
44
OR-PHDSJU48
58
OR-P1TF4ZLFZZZ0002M
169
OR-P401750H-1D
138
OR-PHA66U24
46
OR-PHDTKS6A24
51
OR-P1TF4ZLGZZZ0001M
169
OR-P401750H-1DB
138
OR-PHA66U48
46
OR-PHDTKS6A48
51
OR-P1TF4ZLGZZZ0002M
169
OR-P406395H
140
OR-PHAHJU24
47
OR-PHDTKSU24
52
OR-P1TF4ZRFZZZ001M
168
OR-P413511H-TB
136
OR-PHAHJU48
47
OR-PHDTKSU48
52
OR-P1TF4ZRFZZZ002M
168
OR-P413511H-TD
136
OR-PHAHJU72
47
OR-PJ5E-00
48
OR-P1TF4ZRGZZZ001M
168
OR-P413512H-TB
136
OR-PHAPJU24
48
OR-PJ6-00
48
OR-P1TF4ZRGZZZ002M
168
OR-P413512H-TD
136
OR-PHAPJU48
48
OR-PJ6A-00
48
OR-P1SA4ZLFZZZ002M
OR-P1SA4ZLGZZZ001M
OR-P1SA4ZLGZZZ002M
OR-P1SA4ZRFZZZ001M
OR-P1SA4ZRFZZZ002M
OR-P1SA4ZRGZZZ001M
OR-P1SA4ZRGZZZ002M
OR-P1SC4ZLRZZZ001M
OR-P1SC4ZLRZZZ002M
OR-P1SC4ZLSZZZ001M
OR-P1SC4ZLSZZZ002M
OR-P1SC4ZRRZZZ001M
OR-P1SC4ZRRZZZ002M
OR-P1SC4ZRSZZZ001M
OR-P1SC4ZRSZZZ002M
OR-P1SF4ZLFZZZ001M
OR-P1SF4ZLFZZZ002M
OR-P1SF4ZLGZZZ001M
OR-P1SF4ZLGZZZ002M
OR-P1SF4ZRFZZZ001M
OR-P1SF4ZRFZZZ002M
OR-P1SF4ZRGZZZ001M
OR-P1SF4ZRGZZZ002M
OR-P1TA4FLFZZZ0001M
OR-P1TA4FLFZZZ0002M
OR-P1TA4FLGZZZ0001M
OR-P1TA4FLGZZZ0002M
OR-P1TA4ZRFZZZ001M
OR-P1TA4ZRFZZZ002M
OR-P1TA4ZRGZZZ001M
OR-P1TA4ZRGZZZ002M
OR-P1TC4ZLRZZZ0001M
204
Page
COPPER
CONNECTIVITY
Part Number Index
Part Number
COPPER
CONNECTIVITY
Page
PHYSICAL
SUPPORT
Part Number
OPTIMO
FIBER OPTIC
Page
TECHCHOICE
SOLUTIONS
Part Number
ADAPTERS
Part Number
Page
OR-PJSN5E-xx
58
OR-RFPAHD01U
154
OR-SPCZ660M-XX
192
OR-TRHR-12D
Page
135
OR-PJSN6A-xx
58
OR-RFPAHD01U-A
155
OR-SPCZA610M-XX
192
OR-TRHR-18B
135
OR-PJSN6-xx
58
OR-RFPAHD02U
154
OR-SPCZA615M-XX
192
OR-TRHR-18D
135
OR-PJSNIC-53
59
OR-RFPAHD02U-A
155
OR-SPCZA620M-XX
192
OR-TRP5-CM
139
OR-PMP5E12H
45
OR-RFPHD01U
153
OR-SPCZA625M-XX
192
OR-TRP8-CM
139
OR-PMP5E1289
45
OR-RFPHD02U
153
OR-SPCZA630M-XX
192
OR-TRP8-S
139
OR-PMP612H
45
OR-RHB-06B
140
OR-SPCZA650M-XX
192
OR-TRP11-CM
139
OR-PMP61289
45
OR-RHB-06D
140
OR-SPCZA660M-XX
192
OR-TRP17-CM
139
OR-PPCA5E6U24
58
OR-RHB-12B
140
OR-SPKSU24
190
OR-TRT10-6
134
OR-PPCA5E6U48
58
OR-RHB-12D
140
OR-SPKSU48
190
OR-TRT10-6B
134
OR-PPCA66U24
58
OR-RU-1224CN
102
OR-SVMS704
90
OR-TRT10-12
134
OR-PPCA66U48
58
OR-RU-M6X1CN
102
OR-SVMS706
90
OR-TRT10-12B
134
OR-PPCA610U24
58
OR-SP5EU24
190
OR-SVMS804
90
OR-TRT10-18
134
OR-PPCA610U48
58
OR-SP5EU48
190
OR-SVMS806
90
OR-TRT10-18B
135
OR-PPCF5E6U24
58
OR-SP6U24
190
OR-TJ5E00
28
OR-TRT10-24
135
OR-PPCF5E6U48
58
OR-SP6U48
190
OR-TJ5E45
28
OR-TRT10-24B
135
OR-PPCF66U24
58
OR-SPA5EU24
190
OR-TJ6A
28
OR-TRTC-6B
135
OR-PPCF66U48
58
OR-SPA5EU48
190
OR-TJ600
28
OR-TRTC-6D
135
OR-PPCF610U24
58
OR-SPA6U24
190
OR-TJ645
28
OR-TRTC-12B
135
OR-PPCF610U48
58
OR-SPA6U48
190
OR-TJS5E00
29
OR-TRTC-12D
135
OR-PS-1224CN
102
OR-SPAKSU24
190
OR-TJS6A
29
OR-TRTC-18B
135
OR-PSD5E6U12
45
OR-SPAKSU48
190
OR-TJS600
29
OR-TRTC-18D
135
OR-PSD5E6U24
45
OR-SPC5E03-XX
191
OR-TJSN5E-xx
59
OR-TRTC-24B
135
OR-PSD5E6U24HM
48
OR-SPC5E05-XX
191
OR-TJSN6A-xx
59
OR-TRTC-24D
135
OR-PSD5E6U48
45
OR-SPC5E07-XX
191
OR-TJSN6-xx
59
OR-TRTCI-6B
135
OR-PSD5E6U48HM
48
OR-SPC5E10-XX
191
OR-TJSNIC-53
59
OR-TRTCI-6D
135
OR-PSD5E6U96
45
OR-SPC5E15-XX
191
OR-TKS6A
52
OR-TRTCI-12B
135
OR-PSD66U12
45
OR-SPC5E25-XX
191
OR-TOBLIAFCZIIxxxF
171
OR-TRTCI-12D
135
OR-PSD66U24
45
OR-SPC603-XX
191
OR-TOBLIAFCZIIxxxM
171
OR-TRTCI-18B
135
OR-PSD66U24HM
48
OR-SPC605-XX
191
OR-TOBLLAFFZAAxxxF
170
OR-TRTCI-18D
135
OR-PSD66U48
45
OR-SPC607-XX
191
OR-TOBLLAFFZAAxxxM
170
OR-TRTCI-24B
135
OR-PSD66U48HM
48
OR-SPC610-XX
191
OR-TOBPIAFCZIIxxxF
171
OR-TRTCI-24D
135
OR-PSD66U96
45
OR-SPC615-XX
191
OR-TOBPIAFCZIIxxxM
171
OR-TRTHR-12B
135
OR-PS-M6X1-50
102
OR-SPC625-XX
191
OR-TOBPLAFFZAAxxxF
170
OR-TRTHR-12D
135
OR-PS-M6X1CN
102
OR-SPCA5E03-XX
191
OR-TOBPLAFFZAAxxxM
170
OR-TRTHR-18B
135
OR-RCBK-6
139
OR-SPCA5E05-XX
191
OR-TR6-6B
134
OR-TRTHR-18D
135
OR-RECBK-6
136
OR-SPCA5E07-XX
191
OR-TR6-6D
134
OR-VC603-09
64
OR-RECBK-6B
136
OR-SPCA5E10-XX
191
OR-TR6-12B
134
OR-VC605-09
64
OR-RECBK-12
136
OR-SPCA5E15-XX
191
OR-TR6-12D
134
OR-VC607-09
64
OR-RECBK-12B
136
OR-SPCA5E25-XX
191
OR-TR6-18B
134
OR-VC609-09
64
OR-RECBK-18
136
OR-SPCA603-XX
191
OR-TR6-18D
134
OR-VC615-09
64
OR-RECBK-18B
136
OR-SPCA605-XX
191
OR-TR6-24B
134
OR-WRTRT-12
136
OR-RECBK-24
136
OR-SPCA607-XX
191
OR-TR6-24D
134
OR-WRTRT-12B
136
OR-RECBK-24B
136
OR-SPCA610-XX
191
OR-TR10-6B
134
OR-REK-2-3
139
OR-SPCA615-XX
191
OR-TR10-6D
134
OR-REK-4-6
139
OR-SPCA625-XX
191
OR-TR10-12B
134
OR-RFP01U
153
OR-SPCZ610M-XX
192
OR-TR10-12D
134
OR-RFP02U
153
OR-SPCZ615M-XX
192
OR-TR10-18B
134
OR-RFPA01U
154
OR-SPCZ620M-XX
192
OR-TR10-18D
134
OR-RFPA01U-A
155
OR-SPCZ625M-XX
192
OR-TR10-24B
134
OR-RFPA02U
154
OR-SPCZ630M-XX
192
OR-TR10-24D
134
OR-RFPA02U-A
155
OR-SPCZ650M-XX
192
OR-TRHR-12B
135
205
ECUADOR
NICARAGUA
Guayaquil:
Av. Joaquín Orrantia y Leopoldo Benitez,
Edificio Elite Building, Planta Baja, Oficinas
3 - 6. (Ciudadela Vernaza Norte, Mz.1)
Tel.: +(593) 04.372.1500
Fax.: +(593) 04.263.8020
E-mail: [email protected]
Quito:
Centro Profesional Altamira, Calle Principal
Altamira, 1/2 cuadra al sur del BDF, Módulo 6,
Managua.
Tel. / Fax.: +(505) 2278.1327
E-mail: [email protected]
PANAMA
Avenida Los Shyris y Suecia,
Edificio Renazzo Plaza, Piso 6, Oficina 606.
Tel.: +(593)2600.5858
Tel./Fax: +(593) 2600.5857
E-mail: [email protected]
Vía Israel, San Francisco 6 Sur
Plaza Elmec, Local Comercial #2
Ciudad de Panamá
Tel.: +(507) 831.5900
Fax.: +(507) 265.3763
E-mail: [email protected]
El SALVADOR
REPUBLICA DOMINICANA
Alameda Manuel Enrique Araujo,
Centro Comercial Plaza Jardín, Edificio C,
local 4 #3541 San Salvador
Tel.: +(503) 2133.6100
Fax.:+(503) 2245.0981
E-mail: [email protected]
COSTA RICA
100 mts. Norte entrada principal de
CENADA,
Barreal de Heredia.
Tel.: +(506) 2298.5600
Fax.: +(506) 2239.0472
P.O Box: 6563-1000 San José - Costa Rica
E-mail: [email protected]
Calle Padre Fantino Falco, #24 Edificio J. Baez,
2do. piso, Ensanche Naco, Santo Domingo.
Tel.: +(809) 334.1356 / 368.3636
Fax.: +(809) 476. 9142
E-mail: [email protected]
GUATEMALA
14 Calle 3-51 Zona 10 Edificio Murano Center,
Local 11, Segundo Nivel, Ciudad de Guatemala.
Tel.: +(502) 2494.7575
Fax.: +(502) 2366.5779
E-mail: [email protected]
HONDURAS
Tegucigalpa:
Centro Comercial Mini plaza, 2do Nivel, Local
24, Avenida La Paz, 2 cuadras abajo de la
Embajada U.S.A.
Tel./ Fax.: +(504) 2220.5211
E-mail: [email protected]
San Pedro Sula:
Residencial Costa del Sol, 3er. portón,
apartamento 2B, 15 calle S.O.
Tel.: +(504) 2504.6161
E-mail: [email protected]
Costa Rica:
800.BTICINO (2842466)
El Salvador:
800.BTICINO1 (28424661)
Honduras:
+(504) 2220.5211
Panamá:
800.0900
Ecuador:
1.800.TICINO (842466)
Guatemala:
1.801.00.BTGUA (28482)
Guatemala:
+(505) 2279.1327
República Dominicana:
1.809.200.BTRD (2973)
www.bticino.cr
[email protected]
Global Headquarters
125 Eugene O’Neill Drive
New London, CT 06320
Phone: 800.934.5432
or 860.445.3900
Fax: 860.405.2992
www.ortronics.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement