BAMO
2010
pH
Chlorine
Conductivity
Turbidity
Level
Flow
Plastic devices
Phone: +33 (0) 130 258 320 – http://www.bamo.eu
European company for industrial instrumentation
BAMO: European company since 1978
R&D
Product development is conducted in accordance with
DIN EN ISO 9001:2000 procedures, as well as all
applicable legal requirements and European standards.
Testing in our own EMC lab, as well as by external
approval authorities (i.e. TÜV, DIBt etc.), fulfills the
prerequisites for application of the CE mark, as well as
WHG and ATEX requirements.
For Your Safety.
Contact us if you have any question! Custom products
for special requirements are part of our know-how.
Development and Test laboratory
Electronics R&D
TIG welding for stainless steel
Ultrasonic welding
We are with the listening of your needs.
Manufacturing and assembly
All of the necessary technologies are available in the
factory.
This guarantees us the flexibility we need to produce
custom devices in the shortest time. Well trained
employees, as well as documented procedures and work
directives which have been implemented within the
framework of the DIN EN ISO 9001:2000 standard,
assure that the quality you expect is continuously
maintained and documented.
We guarantee it.
Testing
All electrical and electronic devices are subjected to strict,
individual testing.
Adherence to documented inspection procedures results in a flawless
functioning of all subassemblies and components during production,
as well as after final assembly. Additional tests prior to shipment
provides you, with assurance that our products meet the highest
quality requirements
Reliability is our force
Calibration and operation testing
BSM 500 - Testing electrical
and mechanical operation
Delivery
Are you in a rush?
Quick shipments are a service we manage
daily. All standard units and components which
are not OEM are almost always available for
immediate shipment.
Let us know your required shipping date.
We'lI find the solution.
Standard shipping procedures, multiple inspections and determination of exact weight complete our
total quality procedures.
2
BAMO: European company since 1978
BAMO MESURES SAS was founded in 1978 by its current president: Mr Yannick Moinet.
Activities of the company are the development, manufacturing and distribution of instruments for the measurement and monitoring of liquids.
Its structure is now very strong with a capital of 400 000 €, large buildings, highly qualified staff and a very good reputation on the market.
Since the beginning, the company has undergone a rapid development focused on industrial pH and conductivity meters.
In the years 1990, the firm expanded rapidly through new developments in level measurement.
Through the purchase of various companies specialized in the control of fluids, BAMO offers a range of skills in research, development and
manufacture of level sensors.
The companies acquired most recently are:
CIEMA, well known in France for RedOx probes (Bougies REDOX)
IER Mess und Regeltechnik in Germany, known for MAXIMAT overfill and leakage sensors.
The head office is located in the Paris area, 15 km to the north of PARIS, 20 km from Roissy Charles de Gaulle Airport, close to the motorway
A15 (Paris – Cergy-Pontoise).
With its leading edge machine tools, its control systems and its large storage facilities, the company offices and factory cover around 2000
square meters in Argenteuil and 1500 square meters in Mannheim.
The company has a very highly qualified staff and therefore is able to offer the best possible service to its customers.
Our employees have the right experience and technical expertise to meet your requirements in the challenge of the 21st Century. Because
most of our range is in stock, we can reduce delivery times and many of our products are available immediate despatch.
Updated permanently, our website is a genuine working tool at your disposal.
We employ 48 people, 5 of them are involved in development, 17 in production and 26 in sales department, logistic, administration and management.
Our warehouse
Visit our Website http://www.bamo.eu
One of our machine tools
Ready for
dispatching
BamoPHOX
Contact
Test us; we shall be proud if
you are satisfied!
Tel.: +33 (0) 130 258 320
E-mail: export@bamo.fr
A modern system assures that our lines are always available for you.
Prompt order processing, quotations and technical studies; exact control of orders means that the shortest possible lead-times can be reached.
3
pH
9240
In-line electrode holder
for pH and ORP
electrodes
Conductivity
Chlorine
BamoPHOX 106
pH/mV-monitor
Designed for pH, ORP and conductivity
electrodes, plus temperature probe
Various fittings are available for immersion
at the point of measurement
PVC material
Various process
connections
available
Conductivity probes
Conductivity measuring of liquids
in containers or open drains
Cell constant: 0.01...10
OPTION: integrated Pt 100 probe
Different materials
9300
Immersion probe holder
OPTION: Self cleaning system
Measurement of pH or ORP (RedOx) in industrial
process.
2 lines display, alphanumerical for simultaneous indication of the measured value plus
the temperature
Range: 0…14 pH and ±1000 mV programmable
Automatic or manual temperature compensation
Output signal (2): 0/4 - 20 mA (parameter and T°)
Relay output: 4 alarm contacts
FACTORY OPTIONS:
- Data-logger and RS 422 interface
- Integrated web server communication
Industrial electrodes
pH or ORP measurement
BamoCHLOR
Chlorine monitoring
Combined electrodes
Universal S7-head,
Connection: 13.5 Pg thread
Complete packages of controlling,
water monitoring, dosing and disinfectant
systems in the water and waste water
treatment field.
Wide range of amperometric sensors
such as chlorine, chlorine dioxide,
ozone, hydrogen peroxide
and peracetic acid.
Complete assembly
4
Turbidity
In-line turbidity monitor
Using absorption and 90° scattered
light technology in accordance with ISO 7027
TURBISENS
Turbidity transmitter,
Immersion Probe
Measuring range: 0.01 - 2000 FNU / FAU
Output signal: 4-20 mA
Compact transmitter 4-20 mA
Measurement according to ISO 7027
6 selectable ranges in FNU, (0...2000)
High resolution from 0.01 FNU
Suitable with turbidity measurement of:
l
Drinking water plants
l
Raw and waste water
l
Flavor concentration
l
Diatomaceous earth dosing
l
Flocculent dosing
l
Phase separation, filtration
Integrated 4 digits display for:
- Actual value
- Programming
- Settings
Integrated colour/dirt compensation
(switchable)
Power supply: 10...30 V DC
Output signal: 4-20 mA
Immediate connection to BamoPHOX monitor,
data logger and regulator
BamoPHOX turbidity monitoring
TRUBOMAT® GS3
Turbidity controller
No effect of day light
Output relay
- Control on phase separation milk/water
- Drinking water quality survey
- Diaphragm filtration efficiency
- Survey on separation, centrifugation
TRUBOMAT® GA
In line turbidity sensor
Materials:
Stainless steel 1.4301
PVC, PP
CP1
Immersion probe
for turbidity control
For open channel flumes
and sludge level monitoring
To be used with a TRUBOMAT® GS3
MudLine® TGS
Portable sludge blanket
level monitor
Battery powered
Mud level detection in primary
and secondary clarifier, thickener
and other applications.
Useful also in rotten black sludge
Sludge level monitoring
in small sewage plants
Immersion depth:
10 m as a maximum
5
Safety systems
MAXITOP
Compact overfill sensor
Universal use for electrically conductive,
non-flammable water endangering liquids
MAXIMAT® TC4
Signalling device
MAXITOP LW-C
Leakage detection sensor
Indicator controller 1 to 4 unit monitoring
No moving parts
Stem: PEHD, Ø 40 mm
Process connection
2" G, PVC, sliding -
With fastening angle and
adjustable thread joint
Stem PEHD, Ø 40 mm
or
Adjustable
immersion depth -
With cap and adjustable
thread joint
According WHG § 19 in Germany,
the serie is called MAXIMAT® C.
According WHG § 19 in Germany,
the serie is called MAXIMAT® LW-C.
LISA
Leakage, inundation and humidity detection
LISA system or “Liquid Intrusion Safe Alarming”, is designed for alarming as soon as humidity or a drop of water is detected on a ribbon alike.
The fail safe alarming system LISA includes, as a minimum, one ribbon alike or one-point detector, plus one alarm relay ES5000.
LISA system is dedicated for leakage detection on water distribution (pipes, sprinklers) and alarming in case of water, condensates or humidity
in areas where water is prejudicial for equipments:
l
Computers, electronic devices, machinery
l
High electric power station
l
Computer rooms, medical equipments
l
HVAC moisture prevention - Museum - Stores, etc...
6
Safety systems
NIVOIL®
Alarm system for oil-water separator
Designed for the monitoring of hydrocarbon fluids separators, the
converter NivOil® may be connected to 1, 2, or 3 sensors.
The 3 sensors may be connected to any input.
Hydrocarbon fluid layer thickness sensor to detect when the
maximum thickness is reached.
Overfill sensor to detect when the fluids are on the highest level
Sludge layer sensor to alarm when maintenance is necessary.
ATEX certification
Main power supply 230 V AC / 50 Hz, or 10...27 V DC
- 3 inputs, for any NIVOIL probes
- Automatic recognition of type probe
- 3 relay outputs
- Audible alarm disable by DIP switch
- Front system drawing with lightning alarms
- Wall mounting cabinet, IP 65
- Suspended cable probes with 10 m long cable
-
Overfilling sensor
Oil layer thickness sensor
Sludge layer sensor
Oil-water separator
BAMOBOX SOLAR (BBS)
Autonomous system for oil-water separator
A complete system BBS will power an alarm unit NivOil® 10...27 V DC
when no main power supply exists in the field.
- Autonomous complete system
- Field installation
- Solar panel powered and battery
- Pole clamp fitting or wall mounting
- Battery protection against discharge and overload
- Solar panel own fitting support
OPTIONS:
- Flashing light (Short distance survey)
- GSM (Large distance survey)
7
Level detectors
BSM 501 - BSM 515
Level switches
NIVOSTOP®
Switch level floats
Mounting on Stainless steel, PVC and PP tubes
Fixing: Stainless steel or plastic collar for pipes,
For diameter: 32 or 63 mm.
1 changeover contact: 500 VA ...
Large range
For waste water and sewage pumping systems, sumps shafts etc...
With built-in ballast
With different cables
With different shapes
With built-in ballast
ES 2001
Level control relay
For electrically conductive liquids
- On/Off level controller using 2 rods
- Level regulation using 3 rods
- Pump automation, protection
- Alarm signals
MNR 6, MNR 7.., MNR 7/EX
Magnetic float level controllers
TVI - HE - STE - STS
Probes for resistive level control
1 to 6 changeover contacts
Length up to 3000 mm,
PVC, PP, PVDF, Stainless steel,
Certification for category 1 (Zone 0)
Even for aggressive liquids.
1 to 5 electrodes,
PVC, PP, PVDF or Stainless steel, PTFE coating
Maxima: 220 °C / 200 bar
Connections to relay ES 2001
8
LevelSommaire
transmitters
RTM
Continuous level transmitter
NIVAPRESS
Hydrostatic level transmitter
Signal output: 4-20 mA
Step: 10 mm
The RTM is adapted
to our level indicators
MAGTOP, SFA,
MNR 6 and MNR 7.
Convenient for measuring clear liquids,
stored in tanks and wells.
It is recommended for monitoring and control
of submersible pumps systems.
BAMOBUL
Level measurement
Air bubble principle
Wall mounting housing IP 55, with pressure sensor
Air generator with flow rate regulator for level measurement
in open channel flumes
Convenient for charged or foaming effluents
Measuring range: 0 to 500 mm WC
Output signal: 4-20 mA
Sensor and probe: Stainless steel 316 L
Diaphragm: Hastelloy C276
Cable: PUR (polyurethane)
Output signal: 4 to 20 mA, (2 wire technique),
or 0 to 10 V (3 wire technique)
Scale range available from 1 to 500 m WC
Version ATEX available:
ATEX Ex II 1G
EEx ia IIC T4 / T5 / T6
MEMPRO®
Hydrostatic level transmitter
Universal use in open tanks
Reliable operation, even with aggressive, highly viscous,
contaminated and crystallising liquids
The measuring cell is not in contact with the medium.
Range from 200 mm up to 10 m WC
Wetted parts: PVC, PP or stainless steel
Measuring cell: Ceramic
Output signal: 4-20 mA
Switching point: MEMPRO S6 with 4 adjustable relays
MEMPRO® Ex C
EEx ia IIC T6 ZONE 0
High-grade steel execution
9
Level indicators
MAGTOP Line
Indirect reading
High mechanical resistance and totally safe
For dangerous products: hot water, alkalis or acids, etc...
Materials: Stainless steel, PVC, PP, PVDF
Connection: Flange or BSP threaded connection
Output signal: 4-20 mA and/or level switches
MAGTOP with
Continuous level transmitter,
Output signal: 4-20 mA
10
FS4
Local indicator,
Tank top fitting
GNR5 / KNR
Local indicator,
level control
For liquids,
with or without particles
Materials: PVC or PP
Glass or transparent PVC tube
Magnet float: PP
Flange or BSP threaded
connection
Level indicators
JAR
Stainless steel Cat & Mouse
SFA series
Cable operated level indicator
Level indicator with metallic parts
Wide scale
Graduated in %, m3, L
Long height possible
Protected pulleys with a no jump system
Sections of 1500 mm, adjustable total length
- Standard model
- Gas tight cable operated level indicator
- Reduced path model
OPTIONAL ACCESSORIES:
- Bi-stable level switches: BSM 501 or BRK 60
- Continuous level transmitter: 4-20 mA output
- Graduated rulers: %, Height, Volume
Accessories:
A complete set for your level indicators
Floats, magnet counterweights, pulleys and graduated rulers
Fit the SFA, GNR 5 series and MAGTOP systems
Counterweights
with magnet
Pulley
11
Flow
BamoPHOX 759
Flow calculator
BAMOBUL
Level measurement
Air bubble principle
Programmable for level,
instantaneous flow,
daily volume, permanent
cumulated volume
Also within memorized
curves for VENTURI,
V or U overflow weir
Input signal: 0/4-20 mA
Output signal: 0/4-20 mA
4 adjustable limit relays
Wall mounting housing IP 65
Ultrasonic
transmitter
For level measurement in open channel flumes
Direct link with BamoPHOX 759
Wall mounting housing IP 55
with pressure sensor
Air generator with flow-rate regulator
Convenient for charged effluents
Measuring range: 0 to 500 mm WC
Accuracy: ±1%
Output signal: 4 to 20 mA
FACTORY OPTIONS:
- Data-logger and RS 422 interface
- Integrated Web Server
communication device
DEBITFLO
Venturi channel
Flow-rate measurement in open channel flumes
Standard: ISO 4359
Long-lasting composite material
Available in a range of 10 sizes, from 7 m3/h to 2500 m3/h
With or without approach channel
V-notch Weir plates & VENTURI
Flow-rate measurement
in open channel flumes
VENTURI chanel
with or without approach chanel.
PVC or PEHD material
FACTORY OPTION:
- integration in plastic
housing for a simple
and mobile installation
DEBITBAC
Overflow weir
Standard: ISO 1438/1-1980
Measuring range: 1 m3/h to 400 m3/h
V-angle from 20° to 90°
Materials: PVC or PE
12
Flow
BAMOFLU
Magnet paddlewheel flow meter
BAMOMATIC
Electromagnetic flow meter
Low pressure loss
Construction: PP, PVDF
or stainless steel
Fit pipes from
ND 15 to ND 600
Flow speed from 0.8 to 6 m/s
Supply voltage: 24 V DC
l
The most competitive on the market
l
Calibrated individually on the test bench
to a precision better than ±5 pulses /1000
l
Convenient for small flow rates between 0.1 and 150 l/min
No pressure loss
Only for conductive liquids (minimum 20 μS/cm)
No influence of density, neither of viscosity, temperature or pressure
Wetted parts: electrodes, stainless steel 316 L – process, POM or PVDF
DEBIX
Flow-rate measuring probe
Differential pressure on liquids, gases and steam
Very low pressure loss
Permanent accuracy: ±1%
Excellent repeatability: 0.1%
Range: 0 to 400 bar within 0 - 400°C
Construction: Stainless steel 316 L
ND 50 to ND 2000 mm
BIF 6040
Flow-rate and counter
For flow meters with pulse output
Input: NPN, PNP, TTL-contact
Main power: 95 to 265 V AC
2 or 4 alarm relays
Output signal: 4-20 mA
Sensor power supply: 24 V DC
DB
Plastic orifice plate
flow meter
For DEBIX and DB
before quotation, please confirm:
- fluid and concentration, specific weight,
- process pressure and temperature,
- maximum flow expected,
- pipe diameter, thickness and material.
Flow direction: vertically up or down, horizontally to the right
or to the left and the best position for reading by the end-user.
For large diameters
Local direct flow indicator
ND 50 ... ND 200
Wetted parts: PVC and EPDM
Measuring range: 2 to 350 m3/h
Maximal pressure: 10 bar at 20°C
OPTION:
- Flowless alarm with a reed contact
13
Plastic valves and devices
TS11 - TS13
Pt 100 Ω sensors
Material: PVC, PP, PVDF
T° range: -20...+140 °C
Signal output: 4-20 mA
or 3 wires
IDP - PDP
Variable area
flow indicators
For aggressive or neutral fluids
Corrosion and shockproof
Construction: All in plastic materials
- PVC
- Trogamid (PA)
- Polysulfon (PSU)
- PVDF
For air - HCl - NaOH - ...
Direct reading
plus 2 set point indicators
Alarm contacts in option
Accuracy: Class 4
Radial mounting: Vertical, ascending flow
IDP model: 0-50 m3/h water in 14 scales
PDP model: 3 to 1500 l/h water in 9 scales
EV 160
2/2 Way Plastic Solenoid Valve
Material housing: PVC, PPH, PTFE
Sealings: EPDM, FPM
Kv: 0,3 to 750 l/mn
Direct operation,
or with pressure line
assistance
NO or NC function
Power supply:
230 V AC / 50 Hz,
24 V DC
SP 800
Jet pump
DB
Plastic orifice plate flow meter
To pump, to mixt and to create vacuum
Contruction: PVC - PPH - PVDF
ND 10 to ND 80
Driving fluid: 100 to 20 000 l/h (water)
Vacuumed fluid: 0 to 14 000 l/h (water)
0 to 23 000 Nl/h (gas)
For large diameters
Local direct flow indicator
ND 50 ... ND 200
Wetted parts: PVC and EPDM
Measuring range: 2 to 350 m3/h
Maximal pressure: 10 bar at 20°C
OPTION:
- Flowless alarm with a reed contact
14
Plastic valves and devices
SPM 903
Gauge guards, all in plastic
To replace costly, heavy and rusty metallic gauge guards
Materials:
- PVC
- PP
- PVDF
Diaphragm: PTFE
l
To protect pressure sensors or gauges
l
To prevent contamination
RDP
Pressure reducing valves
Complete process system protection
Continuous regulated downstream pressure
ND 10 to ND 50 mm
Union end or flange connection
Adjustable pressure from 0.2 to 10 bar
Materials:
- PVC
- PP
- PVDF
Diaphragm: PTFE
SDD
Pressure relief valves
Complete process system protection
Against continuous over pressure
ND 10 to ND 50 mm
Union end or flange connection
Adjustable from 0.2 to 10 bar
Materials:
- PVC
- PP
- PVDF
Diaphragm: PTFE
15
Our manufacture
in France since 32 years
n Technical centre
N°1 of the pH-meter
and conductivity-meter
n Delivery centre
n Training centre
Since the beginning, the company
has undergone a rapid development
focused on industrial pH
and conductivity-meters.
n Manufacturing centre
BAMO MESURES SAS
Factory & offices
22, Rue de la Voie des Bans - Z.I. de la Gare - 95100 ARGENTEUIL - FRANCE
Phone: +33 (0) 130 258 320 - http://www.bamo.eu
Fax: +33 (0) 134 101 605 - E-mail: export@bamo.fr
Registered capital: 400 000 € - APE 2651B - SIREN 314 055 864 - FR 08 314 055 864
Our Germany factory since 41 years in Mannheim
Our facilities
It has 1500 m2 of floor space
which enables us to be well organised
and satisfy our customers.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising