NETWORK FIRE ALARM CONTROL PANEL NFU-7000-L

NETWORK FIRE ALARM CONTROL PANEL NFU-7000-L
NETWORK FIRE ALARM CONTROL PANEL
NFU-7000-L
■ Features
■ Description
Nittan’s SPERA NFU-7000-L Network Fire Alarm
Control Panel offers modular components to meet a
wide variety of applications. Designed for peer-to-peer
network communications, the NFU-7000-L allows for
a maximum of 63 nodes, while providing reliability,
flexibility and expandability.
The NFU-7000 EV protocol is based on the platform
which acquired reliabilities in European and Marine
markets. This panel has a loop driver card which is
capable of driving 2 loops. A Nittan EV protocol supports
254 addresses per loop. Owing to the contribution of
expandability, addressable detectors and modules are
available to be installed without constraint of address
number allocation.
In addition, the base panel includes four Class A/B
(Style Z/Y) Notification Appliance Circuits rated at 1.7
Amps each and a large 16 x 40 back-lit alphanumeric
LCD display.
NFU-7000-L panel can see other panels’ condition of
the same network. Each panel can be configured by any
panel through the network using SPERA configurator.
The network interface module allows the panels to
communicate on a peer-to-peer network via an industry
standard ARCNET protocol. The network capabilities
allow site specific customization and the ability to meet
local and national requirements.
Fire Alarm Control
• One driver card capable of 2 loops is equipped as
standard
• NFU-7000-L has capability of 7 driver cards storage
(max 14 loops)
• One loop supports 254 addresses which can be wired
in Class A (Style 6 or 7) or Class B (Style 4)
• Use of shielded cable is not required for SLC loops
• Modular design
• Four Class A/B (Style Z/Y) Notification Appliance
Circuits rated at 1.7 Amps each
• One Auxiliary power supply, rated at 1.7 Amps for
24 VDC and one resettable 4-wire power supply
• Large 16 line x 40 character Back-lit LCD Display with
user friendly menu
• Programmable Switch Inputs which allow for
multifunctional outputs
• Four Status Queues with selector switches and LEDs
for Alarm, Supervisory, Trouble and Monitor
• Auxiliary relay contacts for Common Alarm, Common
Supervisory and Common Trouble
• RS-232 port for remote system printer
• Two Event History Logs comprised of a 1000 alarm
history log for alarm related events and a 6000 event
history log for all events
• Supports three configuration files (current, previous and
next configuration) with “hot swap” support
• Supports Conventional Hardwire Adder Modules
• Built-in One Man Walk Test operation
• Provides drift compensation for photoelectric smoke
detectors
• Capability to adjust sensitivity levels of intelligent smoke
detectors
• Real time 3D graphical monitoring and control by
Nittan’s NFU-Graphic-monitor
• BACnet support
• Supports Boolean logic functions
• Built-in Ethernet port
• UL listed for Smoke Control
• Manual Control Function
• Input Simulation Function
• Multiple group bypass function with built-in false alarm
prevention technology
- Network Node Bypass
- Node Outputs Bypass
- Input Zone Bypass
- Relay Disconnect
- Device/Circuit Bypass
Network Features
• Up to 63 panels
• Peer-to-peer network communications
• Mutual surveillance / 2 way control available
• Class A (Style 6 or 7) or Class B (Style 4) wiring
configuration
• ARCNET protocol
• Supports copper and/or fiber optic network cable
NOT TO BE USED FOR INSTALLATION PURPOSES.
Nittan reserves the right to make changes at any time without notice in prices, colours, materials,
components, equipment, specifications and models and also to discontinue models.
NFU-7000-L-DAT-02
Rev.2
■ SPERA NFU-7000 Series Network Fire Alarm Control Panels
NFU-7000-L Network Fire Alarm Control Panel
This main chassis comes complete with one Dual Loop
Driver Card (254 Analog Detectors and Addressable
Modules per loop), 4 Class A/B (Style Z/Y) NACs (1.7 Amp
each), a NK-DISP-1640 16 x 40 Graphic LCD display,
and a 12 ampere power supply which charges 17-65
AH batteries. The NK-7000FAC main fire alarm board
supports the NK-FNC Network Controller Module over
the main board plus additional space in the backbox for 8
Driver Cards. The enclosure consists of the NK-7000LBB
backbox, the NK-7000LDR red door, the NK-7000LEXC12
and the NK-7000LEXC06 expander chassis.
NK-7000LEXC12
Expander Chassis provides space for 12 adder modules.
This chassis mounts into the NK-7000LBB backbox.
■ Adder Loop Controller Module
■ Adder Network Controller Modules
NK-LDC-3 Dual Loop Driver Card
The NK-LDC-3 Dual Loop Driver Card provides two
Signaling Line Circuits (SLC) to the SPERA system
consisting of 254 Addressable Modules and Detectors
per loop. The NK-LDC-3 occupies one module slot.
The NFU-7000 Basic Package includes one NK-LDC-3.
NK-FNC Fire Network Controller Module
The NK-FNC provides the network capability to the NFU7000 panels. This module is required per each network
node panel. In addition, the NK-FNC provides an interface
for adding an optional NK-FOM-SP Fiber Optic Network
Adder Module. The NK-FNC mounts in the NFU-7000.
NK-7000LEXC06
Expander Chassis provides space for 6 adder modules.
This shassis mounts into the NK-7000LBB backbox.
■ NFU-7000 Electrical Specifications
AC Line Voltage
120 VAC, 60 Hz / 240 VAC, 50 Hz
4 A / 2 A (primary)
Power Supply Ratings
12 A max. (secondary)
For Indicating Circuits
24 VDC unfiltered, 10 A max.
Battery Type
24 VDC, Gel-Cell/Sealed Lead-Acid
Battery Charging
Capability
17-65 Ah batteries
NK-FOM-SP Fiber Optic Network Adder Module
The NK-FOM-SP Fiber Optic Network Adder Module
allows for the use of fiber optic cabling on the NFU-7000.
The NK-FOM-SP will be mounted over the NK-FNC with
seamlessly connnecting to that interface.
NOT TO BE USED FOR INSTALLATION PURPOSES.
page 2 of 6
NFU-7000-L-DAT-02
Rev.2
■ Adder Hardwire Modules
■ Display Modules
NK-DM-8A Eight Initiating Circuit Module
The NK-DM-8A provides 8 Class B (Style B) or 4 Class
A (Style D) Initiating Circuits configurable for Alarm,
Supervisory or Trouble zones. The NK-DM-8A occupies
one module slot in the NFU-7000.
NK-SGM-4A Four Notification Appliance Circuit Module
The NK-SGM-4A provides 4 Class A/B (Style Z/Y)
Notification Appliance Circuits (NAC) configurable as
Silenceable or Non-Silenceable. Each NAC circuit is rated
at 1.7 Amps. The NK-SGM-4A occupies one module slot
in the NFU-7000.
NK-RM-8A Eight Relay Circuit Module
The NK-RM-8A provides eight individual configurable
relays per module. Each relay provides one Form C
contact rated at 28VDC @1 Amp (resistive load) as well
as a Green LED to indicate that the relay is active. The
NK-RM-8A occupies one module slot in the NFU-7000.
NK-FDX-8 Fan Damper Control Module
The NK-FDX-8 Fan Damper Control Module provides
individually programmed circuits which can be used for
fan or damper control. The NK-FDX-8 connects to the
main panel or the NK-AN-LCD Annunciator and occupies
one display position in the NFU-7000 Series enclosures.
NK-IPS-24 Programmable Input Switches Module
The NK-IPS-24 provides 24 programmable switches that
can be configured for ancillary functions such as zone
bypass or added common control functions. The NKIPS-24 connects to the main panel or the NK-AN-LCD
when mounted remotely. The NK-IPS-24 occupies one
display position in the NFU-7000 Series enclosures.
■ Graphic Monitor Software
■ Adder Auxiliary Modules
NK-AD-300 Digital Alarm Communicator Module
The NK-AD-300 Digital Alarm Communicator Module allows
the NFU-7000 to transmit Alarm, Supervisory and Trouble
information on two telephone lines to a monitoring facility.
The NK-AD-300 occupies one module slot in the NFU-7000.
NFU Graphic Monitor Software (NFU-GM)
Nittan’s NFU-GM Graphic Monitor software is an advanced
fire alarm management and warning system that
provides building ready monitoring, control and software
management solutions that allows a user to monitor
remote sites from multiple operator workstations located
anywhere in the world. The NFU-GM software is available
in four versions:
Standard (NFU-GM), Mini (NFU-GM-mini), Network with
remote control function (NFU-GM-CTRL) and Network for
plural network systems (NFU-GM-NETW)
NOT TO BE USED FOR INSTALLATION PURPOSES.
page 3 of 6
NFU-7000-L-DAT-02
Rev.2
■ Remote LCD Annunciators
NFU-AN-GL Remote Graphic LCD Annunciator
The NFU-AN-GL includes a NK-AN-BB1R Enclosure and
a NK-AN-LCDG 16 line x 40 character back-lit graphical
LCD display that is used to display 8 events per page.
Each event is displayed over 2 lines with 40 characters
per line allowing emergency information to be displayed
in an easy to read format. The NK-AN-LCDG occupies
one display position in the NK-AN-BB Series enclosures.
NK-AN-LCD Remote LCD Annunciator Module
The NK-AN-LCD Remote LCD Annunciator Module is
equipped with a 4 line x 20 character back-lit LCD display
that provides the same functions as the main display on
the fire alarm control panel. The NK-AN-LCD occupies
one display position in the NK-AN-BB Series enclosures.
The enclosures are ordered separately.
■ Remote LED Annunciators
■ Programmable LED Adder Module
NK-AN-32TZDS Remote LED Annunciator Module
The NK-AN-32TZDS Remote LED Annunciator Module
provides common annunciator functions and 32 points of
LED annunciation. The NK-AN-32TZDS has indicators
for A.C. On, Common Trouble and Signal Silence and
controls for System Reset, Lamp Test, Fire Drill, Buzzer
Silence and Signal Silence. The NK-AN-32TZDS
occupies one display position in the NK-AN-BB Series
enclosures.
NK-TZDS-48A Programmable LED Adder Module
The NK-TZDS-48A Programmable LED Adder Module
provides 48 programmable bi-colored LEDs. The NKTZDS-48A connects to the main panel or either the NKAN-LCD or NK-AN-32-TZDS when mounted remotely.
The NK-TZDS-48A occupies one display position in the
NFU-7000 or NK-AN-BB Series enclosures.
■ Graphic Annunciator Driver Modules
NK-MG-32 Main Graphic Driver Module
The NK-MG-32 Main Graphic Driver Module provides
common control inputs for the common control switches
such as System Reset, Signal Silence, Auxiliary
Disconnect, Fire Drill, Lamp Test, Acknowledge and
General Alarm. The NK-MG-32 can also drive up to 32
supervised outputs. These output points are capable of
driving LEDs or incandescent lamps. The NK-MG-32
mounts in a graphic annunciator wallbox or in the NFU7000 enclosures. An external power supply is required
for incandescent lamps and lamp test.
NK-AG-48 Adder Graphic Driver Module
The NK-AG-48 Adder Graphic Driver Module can be
used with the NK-MG-32 to support an additional 48
supervised outputs. The NK-AG-48 mounts in a graphic
annunciator wallbox or in the NFU-7000 enclosures.
■ Dimensions for Annunciator Module Enclosures
Model
Dimensions
NK-AN-BB1R
H 229 mm x W 324 mm x D 30 mm
NK-AN-BB2R
H 457 mm x W 324 mm x D 30 mm
NK-AN-BB3R
H 673 mm x W 324 mm x D 30 mm
NOT TO BE USED FOR INSTALLATION PURPOSES.
page 4 of 6
NFU-7000-L-DAT-02
Rev.2
■ Typical SPERA NFU-7000 Networked System Configuration
■ Current Consumption
Model Number
Description
Standby (Amps)
Alarm (Amps)
Basic Package
NFU-7000
Analog Addressable Fire Alarm Control Panel (12
Amp) with one NK-LDC-3, 2 loops expandable to
6 loops
0.469
0.938
NFU-7000-L
Analog Addressable Fire Alarm Control Panel (12
Amp) with one NK-LDC-3, Large Enclosure Type,
2 loops expandable to 14 loops
0.469
0.938
NK-LDC-3
Dual Loop Driver Card
0.130
0.170
NK-FNC
Fire Network Controller Module
0.190
0.190
NK-FOM-SP
Fiber Optic Network Adder Module
0.015
0.015
NK-DM-8A
8 Initiating Circuit Module
0.080
1 zone active: 0.125
2 zone active: 0.170
4 zone active: 0.275
6 zone active: 0.370
8 zone active: 0.465
NK-SGM-4A
4 Notification Appliance Circuit Module
0.060
0.258
NK-RM-8A
8 Relay Circuit Module
0.025
0.150
NK-AD-300
Digital Alarm Communicator/Dialer Module
0.045
0.120
NK-IPS-24
Programmable Input Switches Module
0.010
0.015
NK-FDX-8
8 Fan Damper Control Module
0.015
0.035
NK-TZDS-48A
Programmable LED Adder Module
0.022
1 zone active: 0.026
2 zone active: 0.030
4 zone active: 0.039
48 zone active: 0.262
NFU-AN-GL
Remote Graphic LCD Annunciator
0.139
0.164
NK-AN-32TZDS
Remote LED Annunciator Module
0.050
32 zone active: 0.300
NK-MG-32
Main Graphic Driver Module
0.035
32 zone active: 0.163
NK-AG-48
Adder Graphic Driver Module
0.035
# of LEDs x 4mA
Options
NOT TO BE USED FOR INSTALLATION PURPOSES.
page 5 of 6
NFU-7000-L-DAT-02
Rev.2
■ Ordering Information
Model
Description
Basic Package
Network Fire Alarm Control Panel
NFU-7000
Network Fire Alarm Control Panel with 12 Amp power supply. Includes one NK-7000FAC main board, one NKLDC-3 Dual Loop Driver Card, one NK-DISP-1640 16 x 40 Main Graphic LCD Display, one NK-7000BB Backbox
and one NK-7000DR Red Door.
NFU-7000-L
Network Fire Alarm Control Panel with 12 Amp power supply. Includes one NK-7000FAC Main Board, one NKLDC-3 Dual Loop Driver Card, one NK-DISP-1640 16 x 40 Main Graphic LCD Display, one NK-7000LBB Large
Backbox, one NK-7000LDR Large Red Door, and one NK-7000LEXC12 and NK-7000LEXC06 Expander Chassis.
Options
Adder Loop Controller Modules
NK-LDC-3
Dual Loop Driver Card
Adder Network Controller Modules
NK-FNC
Fire Network Controller Module
NK-FOM-SP
Fiber Optic Network Adder Module
Adder Hardwire Modules
NK-DM-8A
Eight Class B (Style B) or 4 Class A (Style D) Initiating Circuit Module
NK-SGM-4A
Four Class A/B (Style Z/Y) Notification Appliance Circuit Module (Rated at 1.7 Amps per circuit)
NK-RM-8A
Eight Relay Circuit Module c/w eight form C relays (Rated for 28 VDC @ 1 Amp max. per relay)
Adder Auxiliary Modules
NK-AD-300
Digital Alarm Communicator Transmitter/Dialer Module
Display Modules
NK-IPS-24
Programmable Input Switches Module c/w 24 Selector Switches and 24 Bi-Coloured LEDs
NK-FDX-8
Fan Damper Control Module
NK-TZDS-48A
Programmable LED Adder Module c/w 48 Bi-Coloured LEDs and 48 Trouble LEDs
Remote Annunciator Modules
NK-AN-LCD
Remote LCD Annunciator Module
NK-AN-LCDG
Remote Graphic LCD Annunciator Module (Included in NFU-AN-GL Remote Graphic LCD Annunciator)
NK-AN-32TZDS
Remote LED Annunciator Module c/w 32 Bi-Colored LEDs
Enclosures for Remote Annunciator Modules / Display Modules
NK-AN-BB1R
Remote Enclosure with keylock door. Houses one module.
NK-AN-BB2R
Remote Enclosure with keylock door. Houses two modules.
NK-AN-BB3R
Remote Enclosure with keylock door. Houses three modules.
Graphic Driver Modules
NK-MG-32
Main Graphic Driver Module c/w 32 Supervised Outputs
NK-AG-48
Adder Graphic Driver Module c/w 48 Supervised Outputs
Graphic Monitor Software
NFU-GM-MINI
Mini Licence for monitoring a network connected within 2,000 objects.
NFU-GM
Standard Licence for monitoring a network connected within 10,000 objects.
NFU-GM-CTRL
Control Licence for monitoring and controlling a network connected within 10,000 objects.
NFU-GM-NETW
Network License for managing multiple networks with a single USB stick. Requires Mini, Standard and/or
Control licenses separately.
NFU-7000-L-DAT-02
Rev.2
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising