319767.2AE - Powered Fiber Cable System

319767.2AE - Powered Fiber Cable System
Powered Fiber
Cable System
COMPLETE “RACK TO DEVICE” SOLUTION FOR POWERING
AND COMMUNICATING WITH HD CAMERAS, WI-FI HOTSPOTS,
SMALL CELL AND OTHER NETWORK DEVICES.
SIMULTANEOUSLY POWER & COMMUNICATE
WITH NETWORK DEVICES
Ideal for Wi-Fi access points, HD cameras,
ONT’s and small cell devices
• 30X THE DISTANCE OF POE
• REDUCE LANDLORD/UTILITY NEGOTIATIONS
• ELIMINATE LOCAL POWER SOURCES
• CENTRALLY LOCATED UPS
• SELV AND NEC CLASS II COMPLIANT
Powered fiber cable system with
integrated power management
and media conversion
Applications include a variety of devices requiring
optical communications & DC power
• HD surveillance cameras
• Wi-Fi access points
• Small cells
• PoLAN
• PoE or PoE+ extension
• Digital signage
DATA RATE AND POWER LIMITATIONS OF
POWER OVER ETHERNET (POE, POE+)
Powered fiber cable systems
can deliver Power over Ethernet
(PoE) at up to 30 times the
distance of a CAT cable system.
POWERED FIBER OPTIC CABLE
UP TO 12 OPTICAL FIBERS SMF OR MMF
ONE CABLE,
MANY OPTIONS
EXTREMELY FLEXIBLE CABLE DUE TO
SPECIAL STRANDED CONDUCTORS
AVAILABLE IN 12 AWG OR 16 AWGSMF OR MMF
Single hybrid copper/fiber cable design
for simplified cable field access.
• Designed for “easy peel” cable access – the cable can be accessed much faster than traditional hybrid cables
• No special tools needed – one ordinary wire strip tool accesses both the optical fiber and conductor elements
• Utilizes globally existing, proven and inexpensive FTTH style flat cable hardware
• Outdoor and Riser/LZSH indoor/outdoor rated versions
PoE EXTENDER
• Termination for hybrid cable input
• Environmentally sealed closure
• Circuit protection electronics
• Electrical power management
• Media conversion
• 1 PoE+ output
• Fits in one hand
Solves power & communication challenges
3 LEVELS OF ELECTRICAL PROTECTION
1
PRIMARY
GDT component rated to 40kA surge protection
2
SECONDARY
3
TERTIARY
MOV components rated to 4.5kA
TVS prevents the voltage from rising above 80-100V
POWER MANAGEMENT
• Reduces the need for electrical “system design” by automatically correcting
for voltage drop over distance
• Optical signal and power-in is converted to CAT5 PoE+ compliant jack
APPLICATION EXAMPLES
CELL SITE
BASE STATION
REACH TYPICAL DEVICES SUCH
AS CAMERAS, OUTDOOR WI-FI
HOTSPOTS, SMALL CELLS
• Security camera(s) on street
corners and in commercial areas
• Wi-Fi for data offload
• Small cell for poor coverage areas
PSU co-located at base
station where power and
fiber network are available
CAMPUS
ENVIRONMENT
INDOOR/OUTDOOR CABLE CAN
BE ROUTED INSIDE BUILDINGS
AND THEN TRANSITION TO
OUTSIDE AND UNDERGROUND
APPLICATIONS
• Security camera(s) on lamp
posts and in parking areas
• Wi-Fi hotspots for data offload
• Small cells for poor coverage areas
PSU located in telecom closet or
data center, where power and
fiber network are available
AIRPORT
SURVEILLANCE CAMERAS
SYSTEM CAN ALSO SUPPORT
OUTDOOR HOTSPOTS FOR
AIRPORT EMPLOYEE PROPRIETARY
DEVICE APPLICATIONS (SECURITY,
DATA COLLECTION, ETC.)
• PE outdoor rated cable can be
direct buried, duct installed, etc.
PSU located in telecom closet or
data center, where power and
fiber network are available
SYSTEM OVERVIEW
Small
Cell
PoE
3 km, 15 watts
SWITCH
ROUTER
PoE
Extender
WiFi
AP
FIBER
PATCH
PANEL
PoE+
1.6 km, 30 watts
POWERED
FIBER CABLE
-48V DC
POWER
SUPPLY
Power output:
PoE+
UPS
Fiber: singlemode
or multimode
PoE
Extender
Security
Camera
PoE
PoE
Extender
POWERED FIBER CABLE SYSTEM
• Greatly speeds up planning by eliminating DC electrical calculations for
voltage/power drop over varying distances
• Up to 32 devices simultaneously from one power supply
• Carrier grade electrical protection
• NEC Class II and SELV compliant
• Allows for placing devices exactly where they are needed to maximize coverage
GOAL
A hybrid copper/fiber system that installs like a “long extension cord”
SYSTEM ELEMENTS
• Hybrid Cable
• Cable/Fiber Management
• PoE Extender
• Power Transmission Management
• Safety & Overload Protection
• Power Supply (PSU)
SYSTEM PARTNERSHIPS
The PoE Extender can power and communicate with any PoE+ device, however
it has been designed to integrate seamlessly with specific network access
device brackets. Contact your account representative for additional information.
This allows for “hiding” the poe extender
for demanding aesthetic situations
www.commscope.com
Visit our website or contact your local CommScope representative for more information.
© 2016 CommScope, Inc. All rights reserved.
All trademarks identified by ® or ™ are registered trademarks or trademarks, respectively, of CommScope, Inc.
This document is for planning purposes only and is not intended to modify or supplement any
specifications or warranties relating to CommScope products or services.
BR-319767.3-AE (01/16)
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising