Samsung DVD-V15000K User Guide Manual

Samsung DVD-V15000K User Guide Manual
Downloaded from www.Manualslib.com manuals search engine
6/10/03 12:05 PM
Page 2
Contents
GB
◆ PLAYING BACK
.......................................................................................................
5
■
Playing a Cassette ...............................................................................................................
25
ristics .............................................................................................
6
■
Adjusting Picture Alignment Manually..................................................................................
25
■
Selecting the Audio Output Mode ........................................................................................
26
VCR.................................................................................................
7
■
Playing a Cassette in Slow Motion.......................................................................................
26
■
Playing a Sequence Frame by Frame..................................................................................
27
■
Playing a Sequence at Variable Speeds..............................................................................
27
■
Searching for a Specific Sequence ......................................................................................
28
■
Using the Tape Counter .......................................................................................................
30
■
Connecting an RCA Audio/Video Input Cable......................................................................
31
■
Using the Assemble Edit Function .......................................................................................
32
■
Recording from Another VCR or Camcorder .......................................................................
32
CR .................................................................................................
7
.......................................................................................................
8
.......................................................................................................
9
.......................................................................................................
9
ct DVD-VCR ...................................................................................
10
o the TV using the RCA Cable .......................................................
11
o a Satellite Receiver or Other Equipment .....................................
12
.......................................................................................................
13
CR ..................................................................................................
14
Remote Control ............................................................................
15
me ...................................................................................................
15
age .................................................................................................
16
de...................................................................................................
17
ol .....................................................................................................
18
ol (Remote Control) ........................................................................
18
.......................................................................................................
19
.......................................................................................................
20
ype ................................................................................................
20
.......................................................................................................
21
.......................................................................................................
21
DCASTS
Speed ...........................................................................................
22
Cassette..........................................................................................
23
Immediately .................................................................................
23
with Automatic Stop.....................................................................
24
◆ KARAOKE FUNCTIONS (VCR)
■
Using the KARAOKE Function.............................................................................................
■
SCORE Function..................................................................................................................
33
33
■
KARAOKE SEARCH Function .............................................................................................
33
◆ DVD FUNCTIONS
■
Choosing a Connection........................................................................................................
■
Setting Up the Language Features............................................................................................
34
35
■
Setting Up the Audio Options ...................................................................................................
37
■
Setting Up the Display Options .................................................................................................
38
■
Setting Up the Parental Control ................................................................................................
39
■
A/V Receiver Connections .......................................................................................................
40
■
Special Playback Features .......................................................................................................
41
■
Adjusting the Aspect Ratio (EZ View) ........................................................................................
42
■
Using the Display Function.......................................................................................................
44
■
Changing the Camera Angle ....................................................................................................
45
■
Selecting the Subtitle Language ...............................................................................................
45
■
Repeat Play............................................................................................................................
46
■
Selecting the Audio Language ..................................................................................................
47
■
Using the Mark Function ..........................................................................................................
48
■
MP3/WMA Play.......................................................................................................................
49
■
Program Play & Random Play ..................................................................................................
51
■
Picture CD Playback................................................................................................................
52
3
Downloaded from www.Manualslib.com manuals search engine
1
6/4/03 4:16 PM
Page 4
Safety Instructions
GB
The following illustrations represent precautions.
D)
ctions ..............................................................................................
54
........................................................................................................
54
........................................................................................................
55
ion...................................................................................................
55
........................................................................................................
56
........................................................................................................
56
........................................................................................................
56
........................................................................................................
56
s.......................................................................................................
57
The lightning bolt is a warning sign alerting you to dangerous voltage inside the product.
DO NOT OPEN THE DVD-VCR. Refer to service personnel.
10%
75%
40°C
s (VCR) ............................................................................................
58
(DVD)..............................................................................................
59
tes copyright protection technology that is protected by
in U.S. patents and other intellectual property rights owned
ation and other rights owners. Use of this copyright
must by authorized by Macrovision Corporized by
on, and is intended for home and other limited viewing
wise authorized by Macrovision Corporation. Reverse
mbly is prohibited.
Symbols
1
☛
➢
Hold down
Important
Note
number
H
H
5°C
Do NOT expose the DVD-VCR
to extreme temperature conditions (below 5°C and above
40°C) or to extreme humidity
conditions (less than 10% and
more than 75%).
Do NOT expose the DVD-VCR
to direct sunlight.
Do NOT expose the DVD-VCR
to any liquids.
Do NOT place any objects on
the DVD-VCR or remote
control.
During a storm and/or lightning, unplug the DVD-VCR
from the mains socket and
aerial.
If the remote control is not
used for a long period of time,
remove the batteries and store
it in a cool, dry place.
THIS DEVICE IS NOT FOR USE IN INDUSTRIAL
ENVIRONMENTS
5
Downloaded from www.Manualslib.com manuals search engine
1
6/4/03 4:16 PM
Page 6
cteristics
Front View of the DVD-VCR
GB
aying the following types of discs with the corresponding logos :
Disc Size
12 Cm
8 Cm
Max.
Playing
Time
Single-sided
240 min.
Double-sided
480 min.
Single-sided
80 min.
Double-sided
160 min.
Characteristics
• DVD contains excellent sound
and video due to Dolby Digital
and MPEG-2 system.
• Various screen and audio
functions can be easily selected
through the on-screen menu.
DVD DECK
STANDBY/ON
BUTTON
OPEN/CLOSE
BUTTON
REW /SKIP BACK
BUTTON
ECHO BUTTONS
VIDEO CASSETTE
COMPARTMENT
œTRACKING❷
EJECT BUTTON
VOLUME + / BUTTON
TRACKING
STANDBY/ON
12 Cm
STOP
REW
74 min.
PLAY
VOLUME
FF
SELECT
ECHO
MIC 1
COPY
MIC 2
• Video with CD sound, VHS
quality & MPEG-1 compression
technology.
8 Cm
20 min.
12 Cm
74 min.
8 Cm
20 min.
F.F / SKIP
DVD/VCR
COPY
PLAY/STILL NEXT BUTTON SELECT BUTTON BUTTON
STOP BUTTON BUTTON
• An LP is recorded as an analog
signal with more distortion. CD
is recorded as a Digital Signal
with better audio quality, less
distortion and less deterioration
of audio quality over time.
RECORD
BUTTON
MIC JACK
Rear View of the DVD-VCR
DVD-ROM in this player!
cs.)
DIGITAL AUDIO OUT
SOCKET (COAXIAL)
NTSC
STEREO
• Stereo
• NTSC broadcast • Dolby
Digital disc
disc
system in USA,
, Canada, japan,
South Korea, etc.
COMPONENT
VIDEO OUT
LINE IN
DIGITAL
SOUND
• Digital
Audio disc
• DTS disc
DIGITAL
AUDIO OUT
AUDIO LINE OUT TO TV
(S-VIDEO OR COMPONENT)
LINE OUT TO TV
(COMPOSITE)
are coded by region. These regional codes must match in order for the
atch, the disc will not play.
yer is described on the rear panel of the player.
7
Downloaded from www.Manualslib.com manuals search engine
6/10/03 12:05 PM
Page 8
ntrol
Display Indicators
GB
1
OPEN/CLOSE
19
1
2
3
4
5
6
7
8
20
KARAOKE
21
22
TRK
23
24
25
26
27
28
29
30
31
32
33
34
9
10
11
12
13
14
15
16
* 17
18
19
20
21
* 22
23
24
25
26
27
28
29
30
31
32
33
34
STANDBY/ON
SHUTTLE << / >>
KARAOKE SEARCH
CLEAR
DVD, VCR SELECT
AUDIO
VOLUME +/REWIND
SKIP BACK
STOP
SUBTITLE
MENU
UP
LEFT
DOWN
SPEED SP/LP
RECORD
TIMER
ANGLE
IPC
OPEN/CLOSE
0-9
KARAOKE
INPUT SEL.
F.ADV/STEP
PROG/TRK
FAST-FORWARD
SKIP NEXT
PLAY/STILL
INFO.
RETURN
RIGHT
OK
EZ VIEW
DISC MENU
MARK
SEARCH
MODE
REPEAT
➛➛
/
2
3
4
5
❿❿
STEREO
6
7
8
1
The DVD Deck is active
6
A DVD with a DTS soundtrack is loaded
2
A DVD, CD, VCD, or SVCD is loaded
7
The Hi-Fi track of a VHS tape is playing
3
The time, counter position, time remaining or
(The current TV show or video is broadcast in
current deck status is displayed
4
VHS tape is inserted
5
The VCR Deck is active
Stereo)
8 A Timer Recording is programmed or in progress.
Accessories
You have just purchased a SAMSUNG Video Cassette Recorder (DVD-VCR).
Together with your DVD-VCR, you will find the following accessories in the box.
* Not used
REMOTE CONTROL
& BATTERIES
AUDIO & VIDEO
CABLE
OWNER’S
INSTRUCTIONS
STANDB
Y/ON
OSE
OPEN/CL
KE
KARAO
H
SEARC
E
PROG
KE
KARAO
VOLUM
/ TRK
OK
9
Downloaded from www.Manualslib.com manuals search engine
6/10/03 12:06 PM
Page 10
Connecting DVD-VCR to the TV using the RCA Cable
nnect DVD-VCR
GB
factors when connecting audio or video systems:
lable on your systems
manently to the DVD-VCR (satellite receiver for example) or temporarily
)
TV
he following connectors.
ype
MIC JACK
Audio/Video RCA
Audio RCA
Direction
In
In/Out
Out
Recommended Use
3
◆ MIC
2
◆ Television
◆ Other VCR
◆ Audio out (DVD only)
You can connect your DVD-VCR to the television using the RCA cable if the appropriate input is available on
the television. You thus:
◆ Obtain better quality sound and pictures
◆ Simplify the setting up procedure of your DVD-VCR
☛
RCA
Out
Connect one end of the RCA Audio/Video cable to the Video output and Audio L, R output socket on the rear of
the DVD-VCR.
2
Plug the other end into the appropriate connector on the television.
◆ COMPONENT out (DVD only)
Coaxial
Out
◆ Digital Audio out (DVD only)
S-JACK
Out
◆ S-Video out (DVD only)
◆ Make sure that both the television and the DVD-VCR are switched off before connecting the cables.
1
an audio or video system to your DVD-VCR, ensure that all elements are
on supplied with your equipment for detailed connection instructions and
ions.
11
Downloaded from www.Manualslib.com manuals search engine
1
6/4/03 4:16 PM
Page 12
a Satellite Receiver or Other Equipment
Deck Control Keys
GB
r video equipment to your DVD-VCR in different ways. The following
the connection possibilities.
The DVD-VCR uses one set of controls to operate both decks. The
following keys are helpful in successfully controlling each deck.
1
nectors on the rear of the DVD-VCR are used for equipment,
s or sound systems.
2
Camcorder
3
VCR
4
STANDBY/ON Button
Press the STANDBY/ON button on the remote control or front
panel to turn on the DVD-VCR.
STANDBY/ON
ST
STANDBY/ON
1
DVD Button
Press the DVD button on the remote control when you want to
control the DVD deck.
◆ The DVD indicator will light on the Front Panel Display to show
that the DVD deck is selected.
1
KARAOKE S
VCR Button
Press the VCR button on remote control when you want to control
the VCR deck.
◆ The VCR indicator will light on the Front Panel Display to show
that VHS deck is selected.
VOLUME
PROG / TRK
3
2
DVD-VCR Toggle
Press the SELECT button on the front panel to toggle control
between the DVD deck and the VCR deck.
Sound system
➢
Before using the VCR operation of 17~33 pages, press
the VCR button on the remote control to select VCR
mode.
Before using the DVD operation of 34~56 pages, press
the DVD button on the remote control to select and
watch DVD.
TRACKING
W
PLAY
FF
SELECT
COPY
4
13
Downloaded from www.Manualslib.com manuals search engine
1
6/4/03 4:16 PM
Page 14
o VCR
Inserting Batteries in the Remote Control
GB
The DVD-VCR allows you to copy the contents of a DVD to a VHS
tape with a press of the COPY button.
You must insert or replace the batteries in the remote control when
you:
◆ Purchase the DVD-VCR
1
Insert Disc
Insert the disc you wish to copy in the DVD deck and close the
drawer.
2
Insert VHS Tape
Insert a blank VHS videotape into the VCR deck.
3
Copy the DVD to VHS Tape
Press the COPY button on the DVD-VCR front panel.
◆ The DVD will go into Play mode and the VCR will go into Record
mode.
4
Stop the Copy Process
When the DVD is finished playing, press the VCR button on the
remote control and then press the STOP button to end the copy.
◆ You must stop the Copy process manually when the DVD movie
ends or the DVD may replay and record over and over again.
☛
1
◆ Find that the remote control is no longer working
correctly
If the DVD you are attempting to copy is copy
protected, you will not be able to copy the disc. It is not
permitted to copy Macrovision® encoded DVDs.
1
Push the tab in the direction of the arrow to release the battery
compartment cover on the rear of the remote control.
2
Insert two AAA, RO3 or equivalent batteries, taking care to respect
the polarities:
◆
+ on the battery with + on the remote control
◆
– on the battery with – on the remote control
3
Replace the cover by aligning it with the base of the remote
control and pushing it back into place.
➢
Do not mix different battery types (manganese and
alkaline for example).
Setting the Date and Time
For NTSC DVD or VCD copy
◆ Before starting the copy process, set the Quasi PAL to
Off in Display options of SETUP MENU (see page 38).
◆ If Quasi PAL is On, the copy process can not active.
◆ The copy is only active PAL tape system.
Your DVD-VCR contains a 24-hour clock and calendar used to:
◆ Automatically stop programme recording
◆ Preset your DVD-VCR to record a programme
automatically
You must set the date and time when:
◆ You purchase the DVD-VCR
☛
: English
User Set
Auto Power Off
Screen Messages
: Off
: On
◆ Do not forget to reset the time when you change
clocks from winter to summer time and vice versa.
1
After pressing the MENU, press the OK or ❿ .
Result:
The Setup menu is displayed.
2
Press the corresponding
option.
3
Press the OK or ❿ to select this option.
Result:
The Clock Set menu is displayed.
4
Press ➛ or ❿ to select the hour, minutes, day, month and year.
Result:
The option selected highlight.
5
Press the œ or ❷ buttons to increase or decrease the value.
Result:
The day of the week is displayed automatically.
➢
6
Language
œ,❷
Clock Set
buttons to select the Clock
Time
Date
Year
12 : 00
1 / JAN
/ 2003 WED
You can hold the œ or ❷ buttons down to scroll more
quickly through the values.
On completion, press RETURN to exit the menu.
15
Downloaded from www.Manualslib.com manuals search engine
Downloaded from www.Manualslib.com manuals search engine
Downloaded from www.Manualslib.com manuals search engine
2
6/4/03 4:17 PM
Page 18
Picture Control
VCR
Auto Power Off
GB
The Intelligent Picture Control Feature allows you to adjust the
sharpness of the image automatically, according to your own
preferences.
1
2
On
Off
During playback, press the MENU button on the remote control.
The Setup menu is displayed.
Result:
Press the OK or ❿ .
Result:
The Setup menu is displayed.
3
Press the corresponding œ, ❷buttons to select the
User Set option.
4
Press the OK or ❿buttons to select this option.
Result:
The User Set menu is displayed.
5
Press the corresponding œ or ❷ buttons, until the IPC option is
selected.
6
Press the Ok or ❿buttons to select the IPC (intelligent picture
control) option.
➢ When intelligent picture control mode is ON, the sharpness
of the image is adjusted automatically.
7
To adjust the sharpness manually, press the ❷ button to turn the
IPC mode OFF.
8
Press the ➛ or ❿ buttons until the picture is displayed according to
your preferences.
➢
9
The Auto Power Off feature automatically turns off your DVD-VCR
if no signal is received and you do not press any button for the
selected time.
1
After pressing the MENU, press the OK or ❿ .
Result:
The Setup menu is displayed.
2
Press the corresponding œ or ❷ buttons, until the Auto Power
Off option is selected.
3
Press the OK or ❿buttons, until you select the time of Auto Power
Off interval.
Off
4
1Hour
2Hour
Language
: English
User Set
Auto Power Off
Screen Messages
: Off
: On
Language
: English
User Set
Auto Power Off
Screen Messages
: Off
: On
3Hour
On completion, press RETURN twice to exit the menu.
Off
1Hour
2Hour
3Hour
If you do not press a button within ten seconds, the
PICTURE menu disappears automatically.
On completion, press the RETURN button again.
Picture Control ( Remote Control )
1
During playback, press the IPC button.
Result:
The PICTURE menu is displayed.
2
Press the ❷ button to turn the IPC (Intelligent Picture Control)
option ON and OFF.
➢
When Intelligent Picture Control mode is ON, the sharpness
of the image is adjusted automatically.
3
To adjust the sharpness manually, select Intelligent Picture Control
mode OFF.
◆ The horizontal picture adjusting appears.
4
Press the ➛ or ❿ buttons until the picture is displayed according to
your preferences.
➢
5
If you do not press a button within ten seconds, the
PICTURE menu disappears automatically.
On completion, press the IPC button again.
19
Downloaded from www.Manualslib.com manuals search engine
2
6/4/03 4:17 PM
Page 20
VCR
Repeat Play
ssages
GB
Your DVD-VCR displays most information both on the DVD-VCR
and the television.
You can choose to display or hide this information on the television
screen (except for the SEARCH, Programming MENU and
Timer functions, which cannot be hidden).
On
Off
You can set repeat play to repeat the tape continuously from
beginning to end.
1
After pressing the MENU, press the corresponding
to select the VCR option.
buttons
Language
: English
User Set
Auto Power Off
Screen Messages
: Off
: On
1
After pressing the MENU, press the OK or ❿ .
Result:
The Setup menu is displayed.
2
Press the OK or ❿buttons to select this option.
Result:
The VCR Setup menu is displayed.
2
Press the corresponding œ or ❷ buttons, until the Screen
Messages option is selected.
3
Press the corresponding
Play option is selected.
3
To...
Press OK or ❿, until...
4
To...
Press OK or ❿, until...
Display on-screen information
On is displayed.
Repeat play
On is displayed.
Tape Select
Repeat Play
: E 180
: Off
Hide on-screen information
Off is displayed.
Do not wish to repeat play
Off is displayed.
S-VHS
: Off
4
5
On completion, press RETURN twice to exit the menu.
he Cassette Type
1
2
3
After pressing the MENU press the corresponding
to select the VCR option.
œ,❷
buttons
Press the OK or ❿ buttons to select this option.
Result:
The VCR Setup menu is displayed.
Press the corresponding
œ
or
❷
buttons, until the Tape
Press the OK or ❿ buttons as many times as required, until the
correct cassette length is displayed.
E180
E 300
5
or
❷
buttons, until the Repeat
VCR Setup
1
On completion, press RETURN twice to exit the menu.
VCR
During S-VHS play mode after pressing the MENU press the
corresponding œ, ❷ buttons to select the VCR option.
2
Press the OK or ❿ button to select this option.
Result:
The VCR Setup menu is displayed.
3
Press the corresponding œ or ❷ buttons, until the S-VHS option
is selected.
4
To...
Press OK or ❿, until...
S-VHS play
On is displayed.
Do not wish to S-VHS play
Off is displayed.
E240
E260
Press RETURN twice to exit the menu.
Off
On
The DVD-VCR allows you to playback high quality S-VHS tapes.
Select option is selected.
4
œ
S-VHS Play
If you wish to use the tape counter to display the time remaining on
a cassette, you must indicate the type of cassette inserted.
E180
E240
E260
E300
œ,❷
5
Language
: English
User Set
Auto Power Off
Screen Messages
: Off
: On
Tape Select
Repeat Play
: E 180
: Off
S-VHS
: Off
VCR Setup
Off
On
On completion, press RETURN twice to exit the menu.
To watch S-VHS tapes, set the S-VHS mode to On in the VCR
Setup.
21
Downloaded from www.Manualslib.com manuals search engine
2
6/4/03 4:17 PM
Page 22
he Recording Speed
VCR
Protecting a Recorded Cassette
GB
You can record a cassette at two different speeds:
◆ SP (Standard Play)
◆ LP (Long Play)
In Long Play modes:
◆ Each cassette lasts twice as long
◆ The recording is of a slightly lower quality
To record a cassette...
Press the SPEED button on the
remote control, until...
In standard play mode
In long play mode
SP is displayed.
LP is displayed.
Video cassettes have a safety tab to prevent accidental erasure.
When this tab has been removed, you cannot record on the tape.
1
If you wish to protect a cassette, break off the tab using a small
screwdriver.
2
To re-record over a protected cassette (safety tab broken), cover
the hole with adhesive tape.
1
VCR
Recording Immediately
KARAOKE SEARCH
1
Switch on the television.
2
Press the VCR button.
3
Select the recording speed by pressing the SPEED button as
many times as required (see page 22).
4
Hold REC ( ●) down for a while to start recording.
The record indicator appears on the television and
Result:
DVD-VCR display. An index is recorded on the tape
(see page 28).
5
To stop recording, press ■ once.
KARAOKE
PROG / TRK
VOLUME
2
OK
4
➢
◆ If your DVD-VCR ejects the cassette when you start
recording, check to make sure that the cassette’s
safety tab is intact or that the opening (created by a
broken safety tab) is covered with adhesive tape.
◆ If you reach the end of the tape while recording, the
cassette rewinds automatically.
3
5
OK
23
Downloaded from www.Manualslib.com manuals search engine
2
6/4/03 4:17 PM
Page 24
a Programme with Automatic Stop
VCR
Playing a Cassette
GB
This function enables you to record up to nine hours (LP) of
programmes.
This function allows you to play back any pre-recorded cassette.
Your DVD-VCR stops automatically after the requested length of
time.
1
Switch on the television.
2
Insert the cassette on which the programme is to be recorded,
with the window visible and the safety tab intact or the opening
covered with adhesive tape.
Result:
The DVD-VCR is switched on automatically.
3
Press the VCR button.
4
1
Switch on both the television and your DVD-VCR.
2
Insert the video cassette to be played. If the safety tab on the
cassette is intact, press ❿ll.
Otherwise, the cassette is played automatically.
➢
3
Select the recording speed by pressing the SPEED button as
many times as required (see page 22).
When a cassette is loaded, the tape position is optimized
automatically to reduce disturbance (Digital Auto Tracking).
When playing a cassette, if the end of the tape is reached,
the cassette is rewound automatically.
To...
Then press...
Stop the playback
■ (STOP).
Eject the cassette
MIC 1
Hold the REC button (●) down for a while to start recording.
The record indicator appears on the television screen
Result:
and DVD-VCR display. An index is recorded on the
tape (see page 28).
6
Press the REC button ( ●) several times to increase the
recording time in:
◆
30-minute intervals up to four hours
◆
1-hour intervals up to nine hours
The length is displayed on the television displays. The
Result:
selected programme is recorded for the length of time
requested. At the end of that time, the DVD-VCR stops
recording automatically and power off.
Adjusting Picture Alignment Manually
If you wish to cancel the recording before the end, press
STANDBY/ON.
The Picture Adjustment feature allows you to adjust the alignment
manually to obtain the best possible picture.
☛
If the end of the tape is reached while recording:
◆ The recording stops and power off.
3
(EJECT).
5
7
2
3
MIC 2
VCR
VOLUME
PROG / TRK
When noise bars or streaks appear during playback, adjust alignment
manually by pressing the TRK ( or ) buttons until the picture is clear
and stable.
Result:
◆ The tracking bar appears.
◆ The image is adjusted.
◆ The tracking bar disappears when you release the button.
25
Downloaded from www.Manualslib.com manuals search engine
6/10/03 1:53 PM
Page 26
he Audio Output Mode
VCR
Playing a Sequence Frame by Frame
GB
You can select the mode in which the sound is reproduced on the
loudspeakers and AV outputs. The following options are available.
Option
You can:
◆ Stop the cassette at a given frame (image)
◆ Advance one frame at a time
➢
Description
L
Used to listen to the sound on the left Hi-Fi channel.
R
Used to listen to the sound on the right Hi-Fi channel.
1
MONO
Used to listen to the sound on the normal mono channel.
LR
Used to listen to Hi-Fi stereo sound on the left and right
channels.
➢
◆
❿ll to start playing the cassette
❿ll button one more time to make still mode.
◆
F.ADV/STEP to advance frame by frame
To select the sound mode, simply press the AUDIO button on the remote
control until the required option is displayed.
➢
1
Press:
◆
◆
❿ll to start playing the cassette
❿ll button one more time to make still mode.
◆
❿❿ to start SLOW mode.
❿❿ or ➛➛ button as many times as required to decrease or
◆
increase the speed respectively
To return to the normal speed, press the ❿ll button twice.
◆
2
No sound is heard when playing back a cassette in slow
motion.
VCR
You can vary the playback speed using the Shuttle function (up to
nine times the normal speed).
Example:
You wish to analyze a sportsperson’s technique,
movement by movement.
The Shuttle function is available on the Remote control
When playing back in slow motion, picture interference may occur.
Press the TRK ( or ) buttons to minimize this effect.
☛
Vertical stability: When playing back frame by frame,
interference may be seen on the screen. Press the TRK
( or ) buttons to minimize this effect.
Playing a Sequence at Variable Speeds
Cassette in Slow Motion
You can play a cassette in slow motion.
1
To return to normal playback, press ❿ll.
➢
When playing back tapes recorded in Hi-Fi, the
sound switches to Hi-Fi after five seconds of Mono.
PROG / TRK
Press:
◆
2
VOLUME
No sound is heard when playing back frame by frame.
When you have been using the Slow Motion function for
more than about two minutes, the DVD-VCR will
automatically play to protect the:
➢
No sound is heard when playing a sequence at variable
speeds.
KARAOKE SEARCH
1
Press:
◆
◆
◆
2
1
❿ll during playback
1
KARAOKE
SHUTTLE (<<) to play the cassette backwards
SHUTTLE (>>) to play the cassette forwards
Each time you press a SHUTTLE button, the speed is changed as
shown in the following illustration.
REVERSE REVERSE REVERSE
PLAY
PLAY
PLAY
X9
X5
X3
STILL
SLOW
SLOW
MOTION MOTION
X1/10
X1/5
PLAY
PLAY
X3
PLAY
X5
PLAY
X9
◆ Cassette
◆ Video heads
27
Downloaded from www.Manualslib.com manuals search engine
2
6/4/03 4:17 PM
Page 28
for a Specific Sequence
VCR
Searching for a Specific Sequence
GB
Intro Scan
Each time you record a cassette on this DVD-VCR, an “index” is
automatically marked on the tape when recording starts.
The Search function allows you to fast-forward or rewind to a
specific index and start playback from that point. Depending on the
direction selected, the indexes are numbered as follows:
After pressing the SEARCH, press the corresponding
buttons, until the Intro Scan option is selected.
2
Press the OK or ❿.
3
Press the ➛➛ or ❿❿ buttons depending on the direction
where your desired programme is located.
4
When an Index mark is found the DVD-VCR will playback the tape
for 5 seconds, after which it will continue searching for the next
Index mark.
5
If you want to watch the tape from a particular Index, simply press
❿II.
➞
1
etc.
Prev
Seq. being
Next
Seq.
played
Seq.
2
➢
1
1
etc.
2
This DVD-VCR uses a standard indexing system (VISS). As
a result, it will recognize any indexes marked by other
VCRs using the same system and vice versa.
Go To 0:00:00 Stop
Use this feature when you want to search for the 0:00:00 counter position
on a cassette. Press the CLEAR button at the point on the tape where you
want to set the counter to 0:00:00.
The VCR will rewind or fast forward, searching for the 0:00:00 counter
position, and then automatically stop at that position.
1
After pressing the SEARCH, press the corresponding œ or
buttons, until the Go To (0:00:00) option is selected.
2
Press the OK or ❿.
❷
1
After pressing the SEARCH, press the corresponding
buttons, until the Intro Scan option is selected.
2
Press the OK or ❿.
3
Press the ➛➛ or ❿❿ buttons twice more. This will take
you directly to the start of the desired programme is located.
4
These Index searches can be made forwards: (press ❿❿) or
backwards: (press ➛➛ ). (➛➛ -20
0
+20 ❿❿✌
5
To cancel an Index search simply press the ❿II or ■ button.
●
Use this feature when you want to search for a blank position to record a
program on a cassette.
The VCR will fast forward, searching for a blank position, and then
automatically stop at that position.If the VCR reaches the end of the tape
during end search, the tape will be ejected.
After pressing the SEARCH, press the corresponding
buttons, until the End Search option is selected.
2
Press the OK or ❿.
œ
or
or ❷
INTRO SCAN
Index Skip Search:
This feature will enable you to fast forward/rewind to a specific
point on a tape: E.g. if you have recorded 3 different programmes
on a tape and you have rewound the tape to the beginning, by
using this feature you can go directly to the start of programme 2
simply by pressing the SEARCH button.
End Search
1
œ
●
●
œ
INDEX SEARCH :
:
- 6
or ❷
●
2
2
❷
29
Downloaded from www.Manualslib.com manuals search engine
2
6/4/03 4:17 PM
Page 30
Tape Counter
VCR
Connecting an RCA Audio/Video Input Cable
GB
The tape counter:
◆ Indicates the elapsed time in the play and record modes
(hours, minutes and seconds)
◆ Is reset when a cassette is inserted in the DVD-VCR
◆ Allows you to find the beginning of a sequence easily
☛
If the remaining time is to be calculated correctly, you
must indicate the type of cassette being used.
1
Insert a cassette in your DVD-VCR.
2
To set the tape counter to zero at the beginning of a sequence:
◆ Press INFO. twice to display the counter
◆ Press CLEAR when you want to set the tape counter to zero
3
When you are ready,
◆ Start playback or Recording.
◆ Press the ■ button.
◆ To fast-froward or rewind to the sequence at which the
counter was set to zero, press ➛➛ or ❿❿.
➢
Some DVD-VCR information, such as the counter, can be
displayed on the television screen (unless you have
deactivated the Screen messages mode; refer to page 20).
Press INFO.:
◆ Once to display the current function, programme
number, recording speed, date, time and counter
◆ Twice to display the counter only
◆ Three times to display the time remaining on the
cassette
◆ Four times to clear the display
You can connect other audio/video equipment to your DVD-VCR
using audio/video cables if the appropriate outputs are available on
the equipment chosen.
Examples: ◆ You wish to copy a video cassette with the help of a
second VCR .
◆ You wish to play back and/or copy pictures taken
with a camcorder .
☛
◆ Make sure that both the television and the DVD-VCR
are switched off before connecting the cables.
1
Connect one end of the RCA audio/video cable into the VIDEO
INPUT socket on the rear of the DVD-VCR.
2
Plug the other end of the audio/video cable into the appropriate
output connector on the other system (VCR or camcorder).
3
Connect one end of the RCA audio cable supplied into the AUDIO
INPUT sockets on the rear of the DVD-VCR.
➢
4
1
3
Take care to respect the colour coding of the left and right
channels.
Plug the other end of the audio cable into the appropriate output
connectors on the other system (VCR, camcorder or Hi-Fi sound
system).
31
Downloaded from www.Manualslib.com manuals search engine
2
6/4/03 4:17 PM
Page 32
Assemble Edit Function
VCR
Using the KARAOKE Function
GB
This function allows you to start a new recording at a specific
position on the cassette while maintaining a very smooth scene
change.
1
Insert the cassette to be edited in your DVD-VCR.
2
Press the ❿ll button to start playback.
3
When you reach the position from which you wish to start the new
recording, press the ❿ll button.
4
Press the F.ADV/STEP button again as often as
1
Press the STANDBY/ON button and insert KARAOKE tape.
2
Connect Mic into MIC1 or MIC2 jack.
Then the KARAOKE mode is transferred “ON” mode.
◆ Disconnect the Mic makes the KARAOKE mode transfer to
“OFF” mode automatically.
◆ Press the KARAOKE button on the remote control.
Press the ➛ or ❿ button to select KARAOKE mode “ON”.
3
To adjust the Mic volume and ECHO level, press the VOLUME
and ECHO œ or ❷ keys front pannel.
4
To sing with accompaniment.
necessary to advance frame by frame, until the exact recording
position is located.
5
While the DVD-VCR is in still mode, hold the REC button (●)
down for a while to activate the Assemble Edit function.
6
Press the ❿ll button to start recording.
7
When you have finished recording, press ■ .
1
Press the KARAOKE button on the remote control.
2
Press the corresponding
mode.
rom Another VCR or Camcorder
You can copy a cassette to your DVD-VCR from another video
source, such as another VCR or a camcorder.
☛
œ
or ❷ buttons to select the SCORE
3
Press the ➛ or ❿ buttons to select the SCORE mode “ON”.
4
Score will pop up whenever a song is completed.
KARAOKE :ON ➛❿
:ON ➛❿
❿ SCORE
It is an infringement of copyright laws to copy prerecorded
cassettes or to re-record them in any form without the
permission of the owners of the corresponding copyright.
1
Connect the DVD-VCR, from which the cassette is to be copied, to
the appropriate RCA audio and video input connectors on the
rear of your DVD-VCR, as indicated on page 11.
2
Insert a blank cassette in your DVD-VCR.
3
Insert the pre-recorded cassette in the other video source (VCR or
camcorder).
4
Press the INPUT SEL. button to select the appropriate input on
your DVD-VCR: LINE IN for the RCA input.
5
Start playing back the cassette to be copied.
6
Hold REC (●) down for a while to start recording on your
DVD-VCR.
7
When you have finished recording, press ■ on both VCR and
DVD-VCR.
➢
VCR
SCORE Function
VCR
KARAOKE SEARCH Function
1
Press the STANDBY/ON button and insert KARAOKE tape.
2
Press the KARAOKE button to turn the KARAOKE mode ON.
3
Press ❿ll to start playing the cassette.
4
When you want the next song during playing a song, press the
KARAOKE SEARCH ❿❿ or KARAOKE SEARCH ➛➛ buttons on the
remote control.
KARAOKE SEARCH
KARAOKE
4
4
VOLUME
PROG / TRK
If you wish to view the cassette being copied:
◆ Your DVD-VCR must be connected as usual to the
television (see page 11 for further details)
33
Downloaded from www.Manualslib.com manuals search engine
Downloaded from www.Manualslib.com manuals search engine
Downloaded from www.Manualslib.com manuals search engine
3
6/4/03 4:17 PM
Page 36
DVD
Setting Up the Audio Options
the Language Features
GB
Using the Audio Language
1
2
With the unit in Stop mode, press the MENU button.
With the unit in Stop mode, press the MENU button.
2
Select DVD using œ, ❷ buttons, then OK or ❿ button.
3
Select Audio Setup using œ , ❷ buttons, then press the OK or ❿
button.
3
Select Language Setup using œ, ❷ buttons, then press the OK or
❿ button.
4
Use the œ , ❷ buttons to select the desired item. Then press the
OK or ❿ button.
4
Select Audio using œ, ❷ buttons, then press the OK or ❿ button.
5
Press the œ, ❷ buttons to select ‘English’ .
- Select “Original” if you want the default soundtrack language to be
the original language the disc is recorded in.
- Select “Others” if the language you want is not listed.
6
DVD Setup
Select DVD using œ, ❷ buttons, then OK or ❿ button.
1
Language Setup
Audio Setup
Display Setup
Parental Setup
:
• Dolby Digital Out
1. PCM:
Converts to PCM(2CH) audio.
Select PCM when using the Analog Audio Outputs.
2. Bitstream :
Converts to Dolby Digital Bitstream (5.1CH).
Select Bitstream when using the Digital Audio Output.
Press the OK button.
- English is selected and the screen returns to DVD menu.
➢
•Be sure to select the correct Digital Output or no audio will be
heard.
Dolby Digital Out
MPEG-2 Digital Out
DTS
PCM Down Sampling
• MPEG-2 Digital Out
1. PCM : Converts to PCM(2CH) audio.
Select PCM when using the Analog
Audio Outputs.
Using the Subtitle Language
2. Bitstream : Converts to MPEG-2 Digital Bitstream (5.1CH or
1
With the unit in Stop mode, press the MENU button.
2
Select DVD using œ, ❷ buttons, then OK or ❿ button.
3
Select Language Setup using œ, ❷ buttons, then press the OK or
❿ button.
4
Select Subtitle using œ, ❷ buttons, then press the OK or ❿
button.
5
Use the œ, ❷ buttons to select ‘English’.
- Select “Automatic” if you want the subtitle language to be the
same as the language selected as the audio preference.
- Select “Others” if the language you want is not listed.
Some discs may not contain the language you
select as your initial language; in that case the disc will use its
original language setting.
6
7.1CH).Select Bitstream when using the Digital Audio Output.
• DTS
1. Off : Doesn’t output digital signal.
2. On : Outputs DTS Bitstream via digital output only.
Select DTS when connecting to a DTS Decoder.
• Dynamic Compression
1. On : To select dynamic compression.
2. Off : To select the standard range.
• PCM Down Sampling
1. On : Select this when the amplifier connected to the player is not
96KHz compatible.
In this case, the 96KHz signals will be down converted to
48KHZ.
2. Off : Select this when the amplifier connected to the player is
96KHz compatible.
In this case, all signals will be output without any changes.
Press the OK button.
- English is selected and the screen returns to DVD menu.
➢
• How to make the SETUP menu disappear or return to menu screen during set up;
Press RETURN or ➛ button.
• Manufactured under license from Dolby Laboratories.
“Dolby” and the double-D symbol are trademarks of Dolby Laboratories.
• “DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.
37
Downloaded from www.Manualslib.com manuals search engine
3
6/4/03 4:17 PM
Page 38
the Display Options
DVD
Setting Up the Parental Control
GB
1
With the unit in Stop mode, press the MENU button.
2
Select DVD using œ, ❷ buttons, then OK or ❿ button.
3
Select Display Setup using œ, ❷ buttons, then press the OK or ❿
button.
4
Use the œ , ❷ buttons to select the desired item. Then press the
OK or ❿ button.
• TV Aspect
Depending on the type of television you have, you may want to
adjust the screen setting (aspect ratio).
1. 4:3 Letter Box :
Select when you want to see the total 16:9 ratio screen DVD
supplies, even though you have a TV with a 4:3 ratio screen.
Black bars will appear at the top and bottom of the screen.
2. 4:3 Pan Scan :
Select this for conventional size TVs when you want to see the
central portion of the 16:9 screen. (Extreme left and right side of
movie picture will be cut off.)
3. 16:9 Wide :
You can view the full 16:9 picture on your widescreen TV.
The Parental Control function works in conjunction with DVDs that
have been assigned a rating - which helps you control the types of
DVDs that your family watches.
There are up to 8 rating levels on a disc.
1
Select DVD using œ, ❷ buttons, then OK or ❿ button.
3
Select Parental Setup using œ, ❷ buttons, then press the OK or
❿ button.
4
Use OK or ❿ to select Yes if you want to use a password.
The Enter Password screen appears.
5
Enter your password. The Re-Enter Password
screen appears to confirm the password.
Ok your password again. The Parental Control screen appears.
Video : Sends COMPOSITE VIDEO signal to the Scart JACK.
Display Setup
Parental Setup
:
Parental Setup
Use Password
No
Yes
: No
• About the Rating Level ;
The Rating Level will work only when Use Password is set to
Yes. To unlock the player, use œ, ❷ to select No. Use OK or ❿
to select Rating Level. Press OK.
- Use œ, ❷ to select the level(e.g. Level 6) and press OK. Discs
that contain Level 7 will now not play.
- To cancel the rating level, use OK or ❿ to select No in Use
Password.
• NTSC Disc Output
“NTSC” if the screen only has one NTSC-video entrance. If this
is not the case, you can choose to leave “ PAL 60Hz” as is.
S-Video : Sends S-VIDEO signal to the S-VIDEO OUT JACK.
Language Setup
Audio Setup
With the unit in Stop mode, press the MENU button.
2
• Black Level
Adjusts the brightness of the screen.(On/Off)
• DVD Out
Component : Sends COMPONENT signal (Y, Pb, Pr) to the
component video out JACK.
DVD Setup
• About the Change Password ;
- Use œ, ❷ to select Change Password.
Press OK. The Change Password screen appears.
- Ok your new password. Re-ok the new password again.
➢
• How to make the SETUP menu disappear or return to menu
screen during set up; Press RETURN or ➛ button.
• If you have forgotten your password, see Forget Password in
the Troubleshooting Guide. (See page 59)
~
Yes
39
Downloaded from www.Manualslib.com manuals search engine
3
6/4/03 4:17 PM
Page 40
er Connections
DVD
Special Playback Features
GB
To take full advantage of the movie theater experience that DVD
offers, you may want to connect your DVD-VCR to a complete
Surround Sound system, including an A/V Receiver and six
Surround Sound speakers.
Before You Begin...
During DVD/CD playback you can select from the following
special playback options. To resume normal playback, press the ❿ll
(Play/Still) button.
1
• If your A/V receiver is equipped with a Dolby Digital Decoder,
you have the option to bypass the DVD-VCR’s built-in Dolby
Digital Decoder. Use the DIGITAL AUDIO OUT connection
below.
Press the ❿ll (Play/Still) button on the remote control during
playback.
1
Frame Advance (Step)
While in playback mode, press the F.ADV/STEP button on the
remote control to advance one frame at a time.
Digital Audio Out
Connect a digital coaxial cable from the DIGITAL AUDIO OUT
jacks on the back panel of the DVD-VCR to their corresponding
Digital Audio Input jacks on your A/V Receiver:
• Coaxial
• Use whichever connection is available on your A/V Receiver.
2
Still
• The picture will still and the audio will mute.
• To resume playback, press the ❿ll (Play/Still) button.
• If the player is left in Still mode for 5 minutes, it will stop
automatically.
2
1
PROG / TRK
VOLUME
• Audio is muted during Frame Advance mode.
• Press ❿ll (Play/Still) to resume normal playback.
NOTE: Frame Advance operates only in the forward direction.
3
Skip Forward/Back
3
3
OK
While a CD or DVD disc is in Play mode, press the Skip
Forward/Back (❿❿l / l➛➛) buttons on the remote control or front
panel to jump forward and backward through disc chapters/tracks.
• Skip Forward will jump to the next chapter/track.
• Skip Back will jump to the beginning of the current chapter/track.
• Press Skip Back again to jump to the beginning of the previous
chapter/track.
5
Search Forward/Back
While a disc is in Play mode, press and hold the Forward/Back
(❿❿ /➛➛) buttons on the remote control or front panel to visually
search forward/backward at 2X - 4X - 8X - 16X - 32X - 128X speed.
Press ❿ll (Play/Still) button to resume normal speed.
4
OK
Slow Motion
During playback, press the ❿ll (Play/Still) button to Still the image.
Then use the Search Forward (❿❿ ) to play in slow motion at
variable speeds.
• Each press increases the slow motion speed playback to 1/8, 1/4
or 1/2 normal speed.
• Audio is muted during slow motion playback.
5
Stop/Resume
• Press the Stop button once to stop playback. To resume the
DVD/CD from the point where the disc stopped, press the ❿ll
(Play/Still) button.
• Press the ■ (Stop) button twice to completely stop playback.
The next time you press ❿ll (Play/Still), the disc will start over
from the beginning.
41
Downloaded from www.Manualslib.com manuals search engine
4
6/4/03 4:18 PM
Page 42
he Aspect Ratio (EZ View)
Adjusting the Aspect Ratio (EZ View)
DVD
GB
atio (DVD)
If you are using a 4:3 TV
when the button is pressed repeatedly.
perates differently depending on the screen setting in the initial DVD menu.
n of the EZ VIEW button, you should set the correct aspect ratio in the
.
For 16:9 aspect ratio discs
• 4:3 Letter Box
Displays the content of the DVD title in 16:9 aspect ratio.
The black bars will appear at the top and bottom of the screen.
• 4:3 Pan Scan
The left and right of the screen are cut off and displays the central portion of the 16:9 screen.
TV
• Screen Fit
The top and bottom of the screen are cut off and the full screen appears. The picture will look vertically stretched.
• Zoom Fit
When a 4:3 DVD is viewed on a 16:9 TV, black bars will appear at the left and right of the screen in order to prevent
the picture from looking horizontally stretched.
For 4:3 aspect ratio discs
itle in 16:9 aspect ratio.
are cut off. When playing a
bars at the top and bottom of the screen will disappear. The picture will look
n the type of disc, the black bars may not disappear completely.)
• Normal Screen
Displays the content of the DVD title in 4:3 aspect ratio.
• Screen Fit
The top and bottom of the screen are cut off and the full screen appears. The picture would look vertically stretched.
• Zoom Fit
The top, bottom, left and right of the screen are cut off and the central portion of the screen is enlarged.
he screen are cut off and the central portion of the screen is enlarged.
itle in 16:9 aspect ratio. The picture will look horizontally stretched.
➢
• This function may behave differently depending on the type of disc.
are cut off and the full screen appears. The picture will look vertically stretched.
he screen are cut off and the central portion of the screen is enlarged.
16:9 TV, black bars will appear at the left and right of the screen in order to prevent
lly stretched.
43
Downloaded from www.Manualslib.com manuals search engine
4
6/4/03 4:18 PM
Page 44
Display Function
DVD
Changing the Camera Angle
GB
When Playing a DVD/VCD/CD
Using the ANGLE button
OK
1
During play, press the INFO. button on the remote.
2
Use the œ, ❷ buttons to select the desired item.
3
Use the ➛, ❿ buttons to make the desired setup.
• You may use the number buttons of the remote control to directly
access a title, chapter or to start the playback from the desired
time.
4
To make the screen disappear, press the INFO. button again.
➢
When a DVD contains multiple angles of a particular scene, you
can select the Angle function.
• What is a Chapter?
Each Title on a DVD is usually divided into chapters (similar to
tracks on an audio CD).
• What is a Title?
A DVD may contain several different titles. For example, if a
disc contains four different movies, each might be considered a
title.
To access the desired title when there is more than one in the disc.
TITLE For example, if there is more than one movie on a DVD, each movie
will be identified.
Most of DVD discs are recorded in chapters so that you can quickly
CHAPTER find a specific passage.
TIME
AUDIO
2
Press the ANGLE button to see if an ANGLE
(
) mark is present at the upper Right hand corner of the
screen.
1
When an ANGLE mark is shown, press the ANGLE button, then an
ANGLE select icon will appear at the upper left hand corner of the
screen.
2
Use the ➛, ❿ buttons to select the desired screen angle.
3
To turn off the display, press the ANGLE button again.
DVD
Selecting the Subtitle Language
You can select a desired subtitle quickly and easily with the subtitle
button.
Using the SUBTITLE button
Allows playback of the film from a desired time.
You must ok the starting time as a reference.
Refers to the language of the film soundtrack. In the example, the
soundtrack is played in English 5.1CH. A DVD disc can have up to
eight different soundtracks.
Refers to the subtitle languages available in the disc.
SUBTITLE You will be able to choose the subtitles language or,
if you prefer, turn them off from the screen.
A DVD disc can have up to 32 different subtitles.
A surround sound effect is generated using only two front speakers.
3D SOUND
* When in VCD 2.0 mode (MENU ON mode), this function does not work.
1
1
Press the SUBTITLE button.
2
Use the ➛, ❿ buttons to select the desired subtitle language.
3
Use the œ, ❷ buttons to determine whether or not the subtitle will
be displayed.
OK
ENG
On
ENG
Off
• Initially, the subtitling will not appear on screen.
• The subtitle languages are represented by abbreviations.
➢
• This function depends on what languages are encoded on
the disc and may not work with all DVDs.
• A DVD disc can contain up to 32 subtitle languages.
• How to have the same subtitle language come up
wheneveryou play a DVD; Refer to “Setting Up the
Language Features” on page 35.
45
Downloaded from www.Manualslib.com manuals search engine
4
6/4/03 4:18 PM
Page 46
DVD
Selecting the Audio Language
y
GB
Repeat the current track, chapter, title, a chosen section (A-B), or all
of the disc.
You can select a desired language quickly and easily with the
AUDIO button.
When playing a DVD
1
2
1
Press the AUDIO button.
Select Chapter, Title or A-B using the ➛, ❿ buttons.
2
Use the ➛, ❿ buttons to select the desired language on a DVD.
- The audio languages are represented by abbreviations.
3
Use the ➛, ❿ buttons to select Stereo, ➛ or ❿ (On VCD/CD)
• Press OK at the point where you want the repeat play to start
(A). The B is automatically highlighted.
• Press OK at the point where you want the repeat play to stop
(B).
• To terminate the function, press the 'CLEAR' button.
• A-B REPEAT does not allow you to set point (B) until at least 5
seconds has elapsed after point (A) has been set.
3
Press OK.
4
To return to normal play, press REPEAT again, then press the ➛, ❿
buttons to select Off and press OK.
• It is available to press CLEAR button on the remote controller in
order to stop REPEAT play.
➢
Using the AUDIO button
Press the REPEAT button on the remote.
Repeat screen appears.
• Press the REPEAT button. Select A-B on screen with the ➛, ❿
buttons.
DVD
➢
VCD/ CD
• This function depends on what languages are encoded on the disc
and may not work with all DVDs.
• A DVD disc can contain up to 8 audio languages.
• How to have the same audio language come up whenever you play
a DVD ; Refer to “Setting Up the Language Features” on page 35.
• DVD repeats play by chapter or title, CD and VCD repeat play by disc or track.
• Depending on the disc, the Repeat function may not work.
• When in VCD 2.0 mode (MENU ON mode), this function does not work.
47
Downloaded from www.Manualslib.com manuals search engine
4
6/4/03 4:18 PM
Page 48
Mark Function
DVD
MP3/WMA Play
GB
This feature lets you mark sections of a DVD or VCD (MENU OFF
mode) so you can quickly find them at a later time.
Using the Mark Function (DVD/VCD)
1
During play, press the MARK button on the remote. The Mark
icons will be displayed.
2
Use the ➛, ❿ buttons to move to the desired Mark icon.
3
When you reach the scene you want to mark, press the OK
button. The icon will change to a number (1, 2, or 3).
4
Press the MARK button to turn off the display.
When an MP3/WMA Disc is inserted into the DVD player, the first
song file of the first folder plays.
• If more than two file extensions are present, select the media of your
choice.
• To change the currently playing media, press the STOP ( ■ ) button
twice and then press the DISC MENU button.
• If no button on the remote controller is pressed for 60 seconds, the
menu will disappear and the selected item will be played.
MP3/WMA Play Function
1
When the first song file is playing, the music folder menu will
appear on the right side of the screen.
Up to 8 music folders can be displayed at a time. If you have more
than 8 folders on a disc, press the ➛, ❿ buttons to bring them up
on the screen.
2
Use the œ, ❷ buttons to select the desired music folder, then
press OK.
Use the œ, ❷ buttons again to select a song file. Press OK to
begin playback of the song file.
Recalling a Marked Scene
1
During play, press the MARK button on the remote.
2
Use the ➛, ❿ buttons to select a marked scene.
3
Press the PLAY/STILL (❿ll ) buttons to skip to the marked scene.
PROGRAM
RANDOM
Program/Random playback
Clearing a Mark
1
During play, press the MARK button on the remote.
2
Use the ➛, ❿ buttons to select the mark number you want to
delete.
3
Press the CLEAR button to delete a mark number.
Press the MARK button to turn off the display.
1.
➢
Press the MODE button in STOP mode to switch between the
RANDOM and PROGRAM modes.
• Press the REPEAT button in Play mode to hear only music
continuously and press it once again to release.
• PROGRAM/RANDOM playback cannot be used if the disc
contains more than two types of file extensions.
➢ • Up to three scenes may be marked at a time.
• When in VCD 2.0 mode (MENU ON mode), this function does not work.
• Depending on the disc, the mark function may not work.
49
Downloaded from www.Manualslib.com manuals search engine
4
6/4/03 4:18 PM
Page 50
Program Play & Random Play
GB
Program Play (CD/MP3/WMA)
discs, please follow all the recommendations for CD-R above, plus the
e ISO 9660 or JOLIET format.
WMA files are compatible with Microsoft's DOS and Windows, and with Apple's
st widely used.
PROGRAM
1.
Press the MODE button.
2.
Use the ➛, ❿ buttons to select PROGRAM. Press the OK button.
3.
Use the œ, ❷/ ➛, ❿ buttons to select the first track to add to the
program.
Press the OK button. The selection numbers appear in the
Program Order box.
4.
Press the PLAY/STILL ( ❿II ) button.
The disc will be played in programmed order.
files do not exceed 8 characters, and place ".mp3, .wma" as the file
or Title.wma. When composing your title, make sure that you use 8 characters
e, and avoid the use of special characters including: (.,/,\,=,+).
PROGRAM 01
Program order
Track
te of at least 128 Kbps when recording MP3 files.
lly depends on the rate of compression/decompression you choose. Getting
analog/digital sampling rate, that is conversion to MP3 format, of at least 128
, choosing higher rates, like 192 Kbps or more, only rarely give better sound
RANDOM
01
05
09
13
02
06
10
14
03
07
11
15
04
08
12
16
Random Play (CD/MP3/WMA)
------
------
------
------
CLEAR
on rates below 128 Kbps will not be played properly.
te of at least 64Kbps when recording WMA files.
ally depends on the rate of compression/decompression you choose. Getting
analog/digital sampling rate, that is conversion to WMA format, of at least
on rates below 64Kbps or over 192Kbps will not be played properly.
1.
Press the MODE button.
2.
Use the ➛, ❿ buttons to select RANDOM. Press the OK button.
The disc will be played in random order.
➢
otected MP3 files.
ed and code protected to prevent illegal copying. These files are of the following
trade mark of Microsoft Inc) and SDMITM (registered trade mark of The SDMI
files.
ations cannot be taken as a guarantee that the DVD player will play MP3
ound quality.
logies and methods for MP3 file recording on CD-Rs prevent
our DVD player (degraded sound quality and in some cases,
s).
• Depending on the disc, the Program and Random Play
functions may not work.
PROGRAM
RANDOM
• To resume normal play, press the CLEAR button.
• PROGRAM/RANDOM playback cannot be used if the disc
contains more than two types of file extensions.
• This unit can support a maximum of 99 programmed order.
0 files and 300 folders per disc.
51
Downloaded from www.Manualslib.com manuals search engine
4
6/4/03 4:18 PM
Page 52
k
Picture CD Playback
DVD
GB
• Select JPEG in the menu to view a Photo CD.
• To change the currently playing media, press the STOP ( ■ ) button
twice and then press the DISC MENU button.
• If no button on the remote controller is pressed for 60 seconds, the
menu will disappear and the selected item will be played.
1.
Open the disc tray.
2.
Load the disc on the tray.
Load the disc with the labeled side up.
3.
Close the tray.
- The tray closes and you should get a screen that looks like the
one below.
• Use the œ, ❷ or ➛, ❿ buttons on the remote controller to select the
picture you want to view and then press the OK button. (Press the
PLAY/STILL (❿II) button if you want to play it in the Slide Show mode.)
• To see the next 6 pictures, press the ❿❿l button.
• To see the previous 6 pictures, press the l➛➛ button.
CD-R JPEG Discs
• Only files with the ".jpg" and ".JPG" extensions can be played.
• If the disc is not closed, it will take longer to start playing and not all of the recorded files may be played.
• Only CD-R discs with JPEG files in ISO 9660 or Joliet format can be played.
• The name of the JPEG file may not be longer than 8 characters and should contain no blank spaces or special
characters (. / = +).
• Only a consecutively written multisession disc can be played. If there is a blank segment in the multisession disc,
the disc can be played only up to the blank segment.
• A maximum of 500 images can be stored on a single CD.
• Only Kodak Picture CDs can be played.
• When playing a Kodak Picture CD, only the JPEG files in the pictures folder can be played.
• Picture discs other than Kodak Picture CD may take longer to start playing or may not play at all.
•
: Return to the Album Screen.
•
: Each time the OK button is pressed, the picture rotates 90
degrees clockwise.
•
: Each time the OK button is pressed, the picture is enlarged up to
2X. (Normal ➝ 2X ➝ Normal)
•
: The unit enters slide show mode.
• If a number of files in 1 Disc is over 500, only 500 JPEG file can be played.
• If a number of folders in 1 Disc is over 300, only JPEG files in 300 folders can be played.
*Press the RETURN button to return to the album screen.
*Before the Slide Show can begin, the picture interval must be set.
•
: When this icon is selected and OK is pressed, the pictures
change automatically with about an 6 second interval.
•
: The pictures change automatically with about an 12 second
interval.
•
: The pictures change automatically with about an 18 second
interval.
*Depending on the file size, each interval between images may take
longer or shorter than the manual suggests.
ng appeared, press the RETURN button to return to the album screen.
ote controller pressed for 10 seconds, the menu will disappear.
❿ buttons on the remote controller to display the menu again.
53
Downloaded from www.Manualslib.com manuals search engine
4
6/4/03 4:18 PM
Page 54
KARAOKE
Reserving a Song
g Karaoke Functions
GB
It is the function to reserve the desired song in advance by use of
Keycon
Connect the Mixed Audio Out terminals with the TV or AMP.
2
Press the power button.
1
Playback the Karaoke Disc containing the wanted songs.
Connect Mic into Mic 1 or Mic 2 jack. Then the karaoke mode is
transferred to ON mode.
- To disconnect the Mic makes the karaoke mode transfer to OFF
mode automatically.
2
After pressing the KARAOKE button of the remote transfer to the
KARAOKE ON mode using the œor ❷ buttons.
3
Select the “Request” using the ➛ or ❿ buttons, then press
OK button.
◆ This function operates only in DVD, VCD, and CD
DISC.
4
Input the number (Track No.) of the desired song into the flickering
part(--).
- You can reserve up to 10 songs.
3
➢
5
➢
1
Select the “Keycon” using the ➛ or ❿ buttons.
2
By use of the ➛ or ❿ buttons, change to the desired tone.
- : To let 7 scales down by half scale.
- : Original scale.
- # : To let 7 scales up by half scale.
➢
Request
~
◆ This function cannot operate according to the disc
type.
rol
Request
Karaoke function.
1
◆ When the Request is ended, the mode changes to
STOP mode.
Cancellation of reservation
1
Cancel by pressing the CLEAR button of the remote.
- The last reserved song will be erased first.
2
Continuous pressing of the CLEAR button can cancel the next
reserved song.
3
If the reservation is required again, input the song number in the
flickering part.
◆ Key control function is not applied to the Mic output.
◆ Key control function can not work at the VCR
➢
CLEAR
When you want the next reserved song during playing a song,
press the ❿❿I button.
KARAOKE
◆ Request function is available only when the Karaoke
mode is “ON”.
◆ When using “❿❿I ” button, it can not work at the last
song.
◆ When using Request function, the “REPEAT” function
does not work.
55
Downloaded from www.Manualslib.com manuals search engine
4
6/4/03 4:18 PM
Page 56
Technical Specifications
der
Pressing the KARAOKE button twice displays the following in
Karaoke ON mode:
GB
Rated voltage
- The function to make the music only sound by cancelling vocal
when playing a Karaoke disc.
VOCAL FADER
V1
Remark
CH1. Vocal Cancel
V2
V1 +V2
OFF
General
CH2. Vocal Cancel
CH1, CH2. Vocal Cancel
Vocal Fader Off
- In VCD, CVD or CD, you can select only the L, R, OFF.
110 - 240V~, 50/60Hz
Power consumption
23 Watts
Weight
3.8 Kg
Size
430mm X 265mm X 94mm
Operating ambient temperature
+5°C ~ +35°C
Installation conditions
Operation position : Horizontal,
Relative humidity : Below 75%
Input
Video input (Rear)
RCA jack : 1.0Vp-p (unbalanced) 75Ω
Audio input (Rear)
RCA jack : -8dBm, 47Kohm unbalanced
MIC(Front)
elody
◆
◆
Audio (DVD, VCR)
To guide melody through xylophone and piano help you sing
easily.
This function works only on the DVD Karaoke disc on which the
guide melody is recorded.
Output
RCA jack
Audio (DVD only)
Digital audio out (COAXIAL)
Video (DVD, VCR)
RCA jack
Video (DVD only)
S-Video out
COMPONENT out : RCA jack
Tape format
nction
VHS type video tape,
S-VHS type video tape (Playback only)
Press KARAOKE button twice to turn the Score Mode On.
◆ Score will pop up whenever a song is completed.
Karaoke Disc
Channel
1 CH
2 CH
3 CH
4 CH
5 CH
◆ CVD,
M
V1
V2
2 CH
2 CH
5CH. DVD
2CH. DVD
Left stereo music
Left stereo music + Vocal
Right stereo music Right stereo music + Vocal
Guide melody
Vocal track
Vocal track
Video S/N
Above 43dB (standard recording)
Resolution
Above 240 lines (standard recording)
DVD
Audio S/N
Above 68dB (Hi-Fi), 39dB (Mono)
Audio frequency characteristics
20Hz - 20KHz (Hi-Fi)
Disc
DVD, CD (12cm), CD (8cm), VIDEO-CD (12cm)
Audio S/N
95dB
Audio dynamic range
105dB
-
VCD Karaoke Disc
Channel
1 CH
1 CH
Karaoke
-Channel
L
R
PAL, MESECAM, NT3.58, NTSC4.43,
NTSC playback on PAL TV
VCR
Karaoke disc
◆ DVD
Color system
Karaoke
CVD
VCD, CD
-Channel
CH1 LEFT Left stereo music+Vocal
Left stereo music
CH1 RIGHT Right stereo music+Vocal Right stereo music
+ Vocal
CH2 LEFT
Left stereo music
CH2 RIGHT Right stereo music
-
* It cannot be done as above picture in accordance with the disc type.
CAUTIONS: Make sure to turn the KARAOKE MODE to OFF to
play a movie disc or play in a general mode. If you
play a movie disc with the KARAOKE ON , a score
will show up every time when a chapter is over.
Downloaded from www.Manualslib.com manuals search engine
57
6/10/03 12:09 PM
Page 58
ions (VCR)
Troubleshooting Guide (DVD)
GB
after-sales service, perform the following simple checks.
Before requesting service (troubleshooting)
Explanation/Solution
◆
◆
Check that the power plug is connected to a wall outlet.
Have you pressed the STANDBY/ON button?
◆
A video cassette can only be inserted with the window
side up and the safety tab facing you.
e
◆
Check to see if you are using a prerecorded tape.
k
◆
Press the TRK (
◆
A still picture may have “noise bars”, depending on the
condition of the tape. Press the TRK ( or ) buttons
during SLOW motion to minimize this effect.
◆
If poor pictures appear on a variety of cassettes, the video
heads may need cleaning. This is not a common problem
and unless it appears, the heads should not be cleaned.
When cleaning the video heads, read all instructions
provided with the head cleaning cassette. Incorrect head
cleaning can permanently damage the video heads.
e
or
Problem
Disc does not play.
) buttons to minimize this effect.
5.1 channel sound is not
being reproduced.
Action
Page
◆
◆
◆
Ensure that the disc is installed with the label side facing up.
Check the region number of the DVD.
This player cannot play CD-ROMs, DVD-ROMs, etc. Insert a DVD, a
VIDEO-CD or a CD.
P6
◆
5.1 channel sound is reproduced only when the following conditions
are met. :
1) The DVD-VCR player is connected with the proper amplifier
2) The disc is recorded with 5.1 channel sound.
Check whether the disc being played has the “Dolby 5.1 ch” mark on
the outside.
Check if your audio system is connected and working properly.
◆
◆
◆
The
icon appears on
screen.
roblem after reading the above instructions, note:
number on the rear of your DVD-VCR
ation
P34
P37
The features or action cannot be completed at this time because:
1. The DVD’s software restricts it.
2. The DVD’s software doesn’t support the feature (e.g., angles).
3. The feature is not available at the moment.
4. You’ve requested a title or chapter number or search time that is
out of range.
P35-56
P35-39
Playback mode differs from
the Setup Menu selection.
◆
Some of the functions selected in the Setup Menu may not work
properly if the disc is not encoded with the corresponding function.
The screen ratio cannot be
changed.
◆
The Screen Ratio is fixed on your DVDs.
No audio.
◆
Make sure you have selected the correct Digital Output in the Audio
Options Menu.
◆
Press power on from a cold start with no disc in the unit. Press the
❿❿ and ➛➛ buttons simultaneously on the front panel for five
seconds. Press the MENU button on the remote control to select the
Parental Mode. The Parental Mode is now unlocked as indicated on
the display. Press the DOWN button to select Parental. Press OK
and the Create Password display will appear. You can now set your
rating level and change your password to a new number.
◆
Go to the contents and find the section of the instruction book that
contains the explanations regarding the current problem, and follow
the procedure once again.
If the problem still cannot be solved, please contact your nearest
authorized service center.
f the problem
SUNG after-sales service.
P38
Forgot password
If you experience other
problems.
◆
P37
59
Downloaded from www.Manualslib.com manuals search engine
Downloaded from www.Manualslib.com manuals search engine
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising