CPCI 1228
16 ANALOG INPUTS/32 DIGITAL I/O
SIMULTANEOUS SAMPLING
CPCI 1228
The CPCI 1228 board provides simultaneous and
isochronous acquisition of 16 analog differential inputs,
and 32 TTL I/O (2 x 16 bits).
Each analog input possesses:
− One instrumentation amplifier with softwareprogrammable gain (1 ; 2 ; 5 ; 10) (protection ± 40 V),
− One 16-bit ADC, max speed: 250 kSamples/s,
− One 128-sample programmable digital filter.
CPCI 1228 takes advantage of the PXI concept for boardto-channel and rack-to-rack synchronization. Timesampling is performed through an IRIG B input followed
by a synchronized oscillator which ensures a 1-μs
resolution.
CPCI 1228 features:
− 2K-word measurement-descriptor table,
♦ 16 analog differential
isochronous inputs
♦ 32 TTL I/O (2 x 16 bits)
♦ 16-bit ADCs 250 Ks/s per
channel
− Dual-access RAM in FLIP-FLOP mode, 2 x 256 kwords,
− 8 programmable interrupt sources with a debouncer.
The board can be used as Master or Slave on the CPCI / PXI to
ensure high transmission rates in real time environments.
♦ Software-programmable
gains on each analog input
♦ 15 decimation ratios with
anti-aliasing protection
♦ 1 programmable digital filter
per channel
SPECIFICATIONS*
ANALOG INPUTS
Number of channels
16 differential
♦ High accuracy and low drift
INSTRUMENTATION
♦ IRIG B or TRIGGER input for
time-stamping (Master/
Slave)
Software programmable gain
per channel
1 ; 2 ; 5 ; 10
Input impedance
1 MΩ diff / 500 kΩ SE
Signal range
± 10 V FS
Over voltage protection
± 40 V (with or without supplies)
Input current
± 30 nA
Input offset voltage
≤ ± 200+ 600/GμV
Offset drift
≤ ± 1,7 μV/°C (G = 10)
Gain error
≤ ± 0,04 %
Gain drift
≤ 10 ppm/°C
Non linearity
≤ ± 0,003 % FS
CMRR
≥ 70 dB (DC to 100 kHz)
Slew rate
20 V / μs
Attenuation at 100 kHz
(10 Vpp)
< 100 ndB
Noise
2,5 μVpp (0,1 Hz to 10 Hz)
Crosstalk
≤ -96 dB (DC 100kHz)
THD (input signal at 10 kHz)
≤ - 94dB
♦ Time resolution of 1 µs with
PLL
♦ Multi-board multi-rack sync.
(PXI)
♦ FLIP-FLOP memory on the
board ( 2 x 256 KSamples)
APPLICATIONS
AMPLIFIER
CONTACT:
Email: mail@adas.fr
Tel.: 33.1.41.87.30.00
www.adas.fr
CPCI 1268 - 16 ANALOG INPUTS/32 DIGITAL I/O SIMULTANEOUS SAMPLING
ADCS
Type
16-bit SAR with SH
Speed
250 K Samples/S (5 μs)
INL
± 2 LSB max
DNL
± 1 LSB max
16-bit no missing codes
SFDR
90 dB min
SNR (20 kHz)
88 dB typical
Interchannel skew
5 ns
NUMERICAL FILTERING
Type
FIR (Finite Impulse Response)
Order
127
Selection
With or without filter by software
Cut off frequency
Programmable from Fd/50 to Fd/2,5
Attenuation at twice cut
frequency
≥ 60 dB
Transition slope
≥ 160 dB/octave
Bandwidth ripple
≤ 0,02 dB of DC at 0,7 Fc
SPECIFICATIONS*
DIGITAL I/O
Number of channels
32 TTL / CMOS Compatibility
2 x 16-bit I/O selection
Number of interrupt inputs
8 with Anti-bounce software switchable adjustable frequencies of 30 kHz, 300 kHz, 3 MHz
Timing
Synchro inputs with analog sampling or asynchronous R /W
TIME
STAMPING
Type
Type Analog IRIG B composite input or TTL external start trigger
Analog IRIG B input
Zin = 10 kΩ modulation : 1/3
Vin min : 500 mVpp / 170 mVpp (1/3)
Vin max : 6 Vpp / 2 Vpp (1/3)
Nominal : 2.5 Vpp / 840 mVpp
AFNOR NORM
NORM NFS 87- 500
Coupling
Master / Slave boards with synchro via trigger
High time resolution
PLL with IRIG synchro for 1 μs resolution time stamping
Acquisition frequency
200 kHz max
Number of internal timers
2
Timers Resolution
16 bits
RTSI
3 TRIGGER lines
MEMORIES
AND TRIGGER
Trigger modes
Continuous
Pre/post trigger
Trigger source
External event
Software
Analog threshold
Scanning table
⋅ Pattern
1008 channels
⋅ Depth max
64 K patterns
Memories measurement
⋅ Type
FLIP-FLOP or ONE SHOT
⋅ Deph
2 x 256 kSamples
WWW. ADAS.FR
CPCI 1268 - 16 ANALOG INPUTS/32 DIGITALI/O SIMULTANEOUS SAMPLING
CPCI INTERFACE
PCI
Master/Slave 32 bits/33 MHz
PXI
Trigger & Trigstar
Coupler
AMCC 5335
Data transmission
66 Mo/s (max.)
POWER SUPPLY
Voltage
+ 5 V/1,5 A ; + 3,3 V/0,5 A
SPECIFICATIONS*
CONNECTORS
1 μD 68 pts Female
Front panel connectors
Analog Inputs + Digital I/O
1 x LEMO 1 point for IRIG B or TRIGGER (Input / Output)
PHYSICAL CHARACTERISTICS
Format
3U/4Te CPCI FORM FACTOR
LEDS
1 x Acquisition
1 x Active Master
1 x Access board
ENVIRONMENT
Range
Industrial
Operating temperature
- 20°C / + 70°C
Storage temperature
- 25°C / + 85°C
Relative humidity
90 % non condensing
Vibrations
20 Hz - 2000 Hz - 4g
Chocs
25 g - 6 ms
EUROPEAN
STANDARDS
CE Compliance (EMC - EN 61326 - EN 55011 Class A)
ROHS - 2002/95/EC
*Specifications given for 25°C
ORDERING INFORMATION
PCI 1268 C
16 Analog inputs/32 digitalI/O simultaneous sampling
ACCESSORIES
STB Terminal blocks
STB 534 + (STB 554 + STB 552)
STB 534 + (STB 658 + STB 532 or STB 520)
BCI Terminal blocks
STB 514 + (2 x BCI 184 + 2 x BCI 140 or BCI 160)
Cables
WR 368
Specifications are subject to change. Please, verify the latest specifications prior order.
Version : 2.0— Edi on : June 2016
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising