View PDF - Mobile DJ Network

 Active 1100W 12-Inch Loudspeaker
Product Overview
The new Truesonic TS2 product range is the result of an absolutely
clean-sheet approach to designing professional speakers that strikes
an ideal balance between no-compromise acoustic performance, the
complete array of features that users demand and outstanding
ergonomics and utility—all coupled with a stunning new industrial
design. The amplifiers in the TS212 are rated at 550 watts
continuous, 1100 watts peak—a significant increase over the
previous model. This new higher power capability ensures greater
output for use in larger spaces, with increased clarity, since the
amplifiers won’t “run out of steam” and distort the way less powerful
units will.
The all-new industrial design is more than just beautiful: Four integral
handles, make the TS212 easy to pick up in either H or V orientation.
The tough, durable cabinets have excellent acoustic properties, while
their lighter weight makes them easy to transport.
Higher performance, unsurpassed utility and connection options,
easy transportability and unparalleled value—you’ll find it all in the Alto
Professional TS212 powered loudspeaker
Product Features
•
•
•
•
•
•
•
•
•
•
•
•
•
550W continuous, 1100W peak Class D power
12-inch LF driver, 2.5-inch high-temperature voice coil
1-inch neodymium HF driver with precision waveguide
Bi-amplified design with precision active crossover and EQ
Integrated 2-channel mixer with dual XLR 1/4-inch combo mic/line inputs and independent level controls
XLR Link output
Ground-Lift switch
Contour switch for increased EQ control
Electronic clip, thermal and transducer overdrive protection
Compact, lightweight, trapezoidal cabinet design for easy transport and installation
Can be used as main PA speaker or in floor monitor application
Stand and pole-mountable with integral M10 suspension points
Designed and tuned in the USA
www.AltoProAudio.com
Active 1100W 12-Inch Loudspeaker
Technical Specifications
Output Power
1100 W peak (700 LF + 400 HF)
550 W continuous RMS (350 LF + 200 HF)
Low Frequency
12” (305 mm) woofer, 2” (51 mm) voice coil
High Frequency
1” (25 mm) neodymium driver
Crossover
2 kHz
Maximum SPL
127 dB peak, 124 dB continuous (dB-SPL @ 1 m)
Frequency Response
53 Hz – 20 kHz (+ 3 dB)
Frequency Range
46 Hz – 22 kHz (-10 dB)
Coverage
80/100° H x 60° V nominal
Connectors
(2) 1/4” (6.35 mm) TRS or XLR inputs
(1) XLR link output
Cabinet
Trapezoidal, injection-molded, polypropylene enclosure, with perforated steel grille
Controls
Volume, power on/off with LED, clip limiter with LED, ground lift
Protection
Electronic clip, thermal and transducer overdrive protection
Power
AC Input: 100–120/220–240 V, 50/60 Hz
Fuse: 100-120 V T6.3AL AC250V / 220-240 V T3.15AL AC250V
14.04” x 13.80” x 23.28”
357 x 351 x 591 mm
Dimensions
(width x depth x height)
Weight
28.35 lbs.
12.86 kg
www.AltoProAudio.com
Active 1100W 12-Inch Loudspeaker
User Summary
and Target Markets
The primary target
market for the TS212 is professional performers seeking an easily transportable, moderatelypriced powered loudspeaker solution with exceptionally high performance, power and utility. Combining in excess of
1100W peak power,
a wide frequency range (46Hz – 22kHz), 2 TRS/XLR combo inputs for amplification of a wide
range of input sources (including mixers, instruments, microphone etc), dedicated input volume knobs for on-board
on-board contour & ground switch functionality and an XLR Mix Out connector, users are provided
signal balancing,
with a comprehensive solution for sound reinforcement that is easily expanded to accommodate additional
loudspeakers if required. Users in this target demographic will also appreciate the comparatively light weight of the
TS212 thanks to it’s inclusion of a Class D amplification system, as well as the convenience of five integrated
handles allowing easy pick-up in either horizontal or vertical orientation. Thanks to an output power of 550W
(continuous) / 1100W (peak) users in this demographic are guaranteed sufficient output for use in larger spaces with
increased clarity due to the TS212’s higher headroom when compared to less powerful units.
The secondary target market for Alto Professional’s TS212 is private sector organisations where powerful, clear
sound is required
in a lightweight, conveniently stored and ultra-portable footprint – suitable demographics include
dance studios, houses of worship, function rooms, fitness centres, bars/restaurants and public speaking events.
Additional target markets for the TS212 include:
• Primary,
Secondary, SEN, FE and HE Educational Institutions
• Recording Studio Owners
• Rehearsal
Suites
USP for Target Demographics
Professional Performers
•
•
•
•
•
•
•
•
•
550W continuous, 1100W peak Class D
power
12-inch LF driver, 2.5-inch high-temperature
voice coil & 1-inch neodymium HF driver with
precision waveguide
Integrated 2-channel mixer with dual XLR 1/4inch combo mic/line inputs and independent
level controls
Compact, lightweight, trapezoidal cabinet design
for easy transport and installation
Angled rear panel for wedge monitor
applications
Stand and pole-mountable with integral M10
suspension points
XLR Link output for connection to additional
loudspeakers
Ground-Lift switch
Contour switch for increased EQ control
Private Sector Organisations
•
•
•
•
•
•
550W continuous, 1100W peak Class D
power
12-inch LF driver, 2.5-inch high-temperature
voice coil & 1-inch neodymium HF driver with
precision waveguide
Integrated 2-channel mixer with dual XLR 1/4inch combo mic/line inputs and independent
level controls plus onboard Contour switch for
increased EQ control
Compact, lightweight, trapezoidal cabinet design
for easy transport and installation
Stand and pole-mountable with integral M10
suspension points
XLR Link output for connection to additional
loudspeakers
www.AltoProAudio.com

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project