Moving Aircraft
Moving Aircraft
ORDERCODE 31201
Congratulations!
You have bought a great, innovative product from Showtec.
The Showtec Moving Aircraft brings excitement to any venue. Whether you want simple plug-&-play action
or a sophisticated DMX show, this product provides the effect you need.
You can rely on Showtec, for more excellent lighting products.
We design and manufacture professional light equipment for the entertainment industry.
New products are being launched regularly. We work hard to keep you, our customer, satisfied.
For more information: iwant@showtec.info
You can get some of the best quality, best priced products on the market from Showtec.
So next time, turn to Showtec for more great lighting equipment.
Always get the best -- with Showtec !
Thank you!
Showtec
Showtec Moving Aircraft™ Product Guide
Warning..…...................................................................................…………………………………………...
Safety-instructions………………………………………………………………………………………….….
Operating Determinations………………………………………………………………………………….
Rigging………………………………………………………………………………………………………….
2
2
3
4
Description..…..............................................................................……….……………………………….…. 6
Features and Overview ………………………………...….……………….………….…………………... 6
Backside…………………………………………………...…...….……………….…………………...….…. 7
Installation...............................................................................…...…………………………………….…… 8
Installing the Lamp ........................................................………………………………………..……….. 8
Set Up and Operation.....................................................................……..……………………………….…
One Moving Par ............................................................................………………………………………
Multiple Moving Pars..............................................................................………………………………..
Master/Slave mode...................................………………………………………………………………..
9
9
9
9
DMX-Protocol…...................................................……………………………………………….……………. 10
Control Panel….............……....................................………………………………………..……………. 11
Control Mode........................................…………………………………………………………………… 11
DMX addressing...................................………………………………………………….………………… 11
Control panel functions...................................…………………………………………………………… 12
Stand – alone mode...................................………………………………………………………………. 14
DMX 512 Channel settings for Moving Aircraft.....……………………………………………………... 15
Channel settings…………………………………………………………………….……………………….. 16
Maintenance...................................................................................………..……...….…….……………… 16
Changing the Lamp........................................................................………….……….………………… 17
Replacing the Fuse........................................................................…………..……….………………… 17
Troubleshooting............................................................................………………….………….……….….. 17
No Light, No Movement - All Products............................................………………………………….. 17
No Response to DMX ....................................................................………………….………………….. 17
Product Specifications.................................................................……………….…….….……………….. 19
1
WARNING
CAUTION!
Keep this device away from rain and moisture!
Unplug mains lead before opening the housing!
FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY
BEFORE YOUR INITIAL START-UP!
SAFETY INSTRUCTIONS
Every person involved with the installation, operation and maintenance of this device has to:
be qualified
follow the instructions of this manual
CAUTION! Be careful with your operations.
With a dangerous voltage you can suffer
a dangerous electric shock when touching the wires!
Before your initial start-up, please make sure that there is no damage caused by transportation. Should there
be any, consult your dealer and do not use the device.
To maintain perfect condition and to ensure a safe operation, it is absolutely necessary for the user to follow
the safety instructions and warning notes written in this manual.
Please consider that damages caused by manual modifications to the device are not subject to warranty.
This device contains no user-serviceable parts. Refer servicing to qualified technicians only.
IMPORTANT:
The manufacturer will not accept liability for any resulting damages caused by the nonobservance of this manual or any unauthorized modification to the device.
Never let the power-cord come into contact with other cables! Handle the power-cord and all
connections with the mains with particular caution!
Never remove warning or informative labels from the unit.
Never use anything to cover the ground contact.
Never run the device without lamp!
Never ignite the lamp if the objective-lens or any housing-cover is open, as discharge lamps may
expose and emit a high ultraviolet radiation, which may cause burns.
Never lift the fixture by holding it at the projector-head, as the mechanics may be damaged. Always
hold the fixture at the transport handles.
Never place any material over the lens.
Never look directly into the light source.
Never leave any cables lying around.
Never unscrew the screws of the rotating gobo, as the ball bearing will otherwise be opened.
Do not insert objects into air vents.
Do not connect this device to a dimmerpack.
Do not switch the device on and off in short intervals, as this would reduce the lamp’s life.
Do not touch the device’s housing bare-handed during its operation (housing becomes very hot).
Allow the fixture to cool for at least 5 minutes before handling.
Do not shake the device. Avoid brute force when installing or operating the device.
Only use device indoor, avoid contact with water or other liquids.
Only operate the fixture after having checked that the housing is firmly closed and all screws are
tightly fastened.
2
Only operate the device after having familiarized with its functions.
Avoid flames and do not put close to flammable liquids or gases.
Always replace the lamp, when it is damaged or deformed due to the heat.
Always keep case closed while operating.
Always allow free air space of at least 50 cm around the unit for ventilation.
Always disconnect power from the mains, when device is not used, before cleaning or when
replacing lamp! Only handle the power-cord by the plug. Never pull out the plug by tugging the
power-cord.
To ensure the longest and most efficient use of the lamp always wait 15 minutes before re-applying
power after a shutdown. Failure to do so could result in premature aging of the lamp and failure to
the electronics that drive it.
Make sure that the device is not exposed to extreme heat, moisture or dust.
Make sure that the available voltage is not higher than stated on the rear panel.
Make sure that the power-cord is never crimped or damaged. Check the device and the powercord from time to time.
If the lens is obviously damaged, it has to be replaced. So that its functions are not impaired, due to
cracks or deep scratches.
If device is dropped or struck, disconnect mains power supply immediately. Have a qualified
engineer inspect for safety before operating.
If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do not
switch it on immediately. The arising condensation water might damage your device. Leave the
device switched off until it has reached room temperature.
If your Showtec device fails to work properly, discontinue use immediately. Pack the unit securely
(preferably in the original packing material), and return it to your Showtec dealer for service.
For adult use only. Movinghead must be installed out of the reach of children. Never leave the unit
running unattended.
Never attempt to bypass the thermostatic switch or fuses.
For replacement use lamps and fuses of same type and rating only.
Replace the lamp if it becomes defective or worn out, or before usage exceeds the maximum
service life.
Allow the fixture to cool down for 15 minutes, before opening the fixture and replacing lamp. Protect
your hands and eyes with gloves and safety glasses.
This device falls under protection class I. Therefore it is essential to connect the yellow/green
conductor to earth.
During the initial start-up some smoke or smell may arise. This is a normal process and does not
necessarily mean that the device is defective.
Repairs, servicing and electric connection must be carried out by a qualified technician.
WARRANTY: Till one year after date of purchase.
CAUTION ! EYEDAMAGES !.
Avoid looking directly into the light source.
(meant especially for epileptics) !
OPERATING DETERMINATIONS
This device is not designed for permanent operation. Consistent operation breaks will ensure that the device
will serve you for a long time without defects.
The minimum distance between light-output and the illuminated surface must be more than 1 meter.
The maximum ambient temperature ta must never be exceeded.
If this device is operated in any other way, than the one described in this manual, the product may suffer
damages and the warranty becomes void.
Any other operation may lead to dangers like short-circuit, burns, electric shock, lamp explosion, crash etc.
You endanger your own safety and the safety of others!
3
Rigging
Please follow the European and national guidelines concerning rigging, trussing and all other
safety issues.
Do not attempt the installation yourself !
Always let the installation be carried out by an authorized dealer !
Procedure:
If the projector is lowered from the ceiling or high joists, professional trussing systems have to be used.
Use a clamp to mount the projector, with the mounting-bracket, to the trussing system.
The projector must never be fixed swinging freely in the room.
The installation must always be secured with a safety attachment, e.g. an appropriate safety net or
safety-cable.
When rigging, derigging or servicing the projector, always make sure, that the area below the
installation place is blocked and staying in the area is forbidden.
The Moving Par can be placed on a flat stage floor or mounted to any kind of truss by a clamp.
Mounting a clamp to the underside of the Moving Par moving head
1) Clamp
2) Omega Holder
Improper installation can cause serious damage to people and property !
4
Connection with the mains
Connect the device to the mains with the power-plug.
Always pay attention, that the right color cable is connected to the right place.
International
EU Cable
UK Cable
US Cable
Pin
L
BROWN
RED
YELLOW/COPPER
FASE
N
BLUE
BLACK
SILVER
NUL
YELLOW/GREEN
GREEN
GREEN
EARTH
Make sure that the device is always connected properly to the earth!
5
Description of the device
Features
The Showtec Moving Aircraft is a moving-head with high output and great effects.
• DMX-control via standard DMX-controller
• 6 DMX-control channels required
• Electronic Dimmer
• Strobe-effect with adjustable speed (1 - 10 flashes/sec.)
• Pan 0º -- 540º
• Tilt 0º -- 180º
• Pan/Tilt speed & reset control channel
• Automatic Pan/Tilt correction
• 16 bit resolution
• Auto correction
• Built-in dimmer (0-100%)
• LED display menu with invert
• Pan/Tilt Invert option
• Micro-stepping motors
• Fuse T6A / 250V and extra spare fuse
• Lamp: Par 64 / 1000W (ordercode 80111) Lamp not included
Overview
Fig. 1
6
Backside
1 2 3 4
Fig. 2
1) DMX signal connector (OUT)
2) DMX signal connector (IN)
3) IEC power connector + Fuse 6A
4) 110V/230V Switch
Inside View
Fig. 3
7
Installation
Installing the Lamp
The Showtec Moving Aircraft uses the Par 64 28V 250W (ordercode 80111) bulb as manufactured by all
popular manufacturers. Use only the appropriate lamp for your unit.
Note that, product versions that use other lamps, may be offered in the future. Check your product
specification label for information.
Always disconnect from electric mains power supply before changing lamps.
The lamp has to be replaced when it is damaged or deformed due to the heat.
Do not install lamps with a higher wattage! Lamps with a higher wattage generate temperatures the device
was not designed for.
Damages caused by non-observance are not subject to warranty.
Procedure :
• Always read the safety instructions that are included with the lamp.
• Oil on hands shortens the lamp life. (If you touch the bulb glass, wipe off the glass with a clean,
lint-free towel and rubbing alcohol.).
• Always read all the safety warnings at the beginning of this manual, before replacing the lamp !!!
1. Loosen the 2 springs on the back of the head and gently open the back cover.
2. Gently let the small housing tilt down. The housing is secured by a small safety cable.
3. Gently press the large safety spring together and remove the spring.
4. Read lamp instructions. Do not touch the lamp bulb glass.
Oil on hands shortens the lamp life. (If you touch the bulb glass, wipe off the glass with a clean, lint-free
towel and rubbing alcohol.). Put large safety spring back to fasten the PAR 64 bulb.
5. Gently tighten the 2 small screws on the back of the lamp.
6. Close the housing and fasten the springs snugly.
1
2
3
4
Fig. 4
8
Set Up and Operation
Follow the directions below, as they pertain to your preferred operation mode.
Before plugging the unit in, always make sure that the power supply matches the product specification
voltage. Do not attempt to operate a 120V specification product on 230V power, or vice versa.
One Moving Par
1. Fasten the moving head onto firm trussing (Use a proper clamp fastened onto the Moving Par ).
Leave at least 1 meter on all sides for air circulation.
2. Plug one end of the electric mains power cord into the IEC socket on the unit.
Then plug the other end of the cord into a proper electric power supply socket.
3. To set the program to be played, press:
4. Always use a safety cable.
Hold for 3 sec
Multiple Moving Pars
1. Fasten the moving head onto firm trussing (Use a proper clamp fastened onto the Moving Par ).
Leave at least 1 meter on all sides for air circulation.
2. Use a 3-p XLR cable to connect the Moving Pars and other devices.
The pins:
1.
2.
3.
Earth
Signal Signal +
3. Always use a safety cable.
4. Link the units as shown in (figure 5), Connect a DMX signal cable from the first unit's DMX "out" socket to
the second unit's "in" socket. Repeat this process to link the second, third, and fourth units.
5. Supply electric power: Plug electric mains power cords into each unit's IEC socket, then plug the other
end of the mains power cord into proper electric power supply sockets, starting with the first unit. Do not
supply power before the whole system is set up and connected properly.
Multiple Moving Aircrafts Set Up
DMX-Set up
Fig. 5
Note : Link all cables before connecting electric power
9
DMX Protocol
Channel 1 – Dimmer
0-255
From Shutter / Blackout closed (0) to open (255)
Channel 2 – Strobe
0-255
Strobe effect, from slow to fast (0-10 flashes/sec.)
Channel 3 - Horizontal movement (Pan)
Push the slider up, in order to move head horizontally (PAN).
Gradual head adjustment from one end of the slider to the other (0-255, 128-center).
The head can be turned by 540°and stopped at any position you wish.
Channel 4 - Vertical movement (Tilt)
Push the slider, up in order to move head vertically (TILT).
Gradual head adjustment from one end of the slider to the other (0-255, 128-center).
The head can be turned by 180°and stopped at any position you wish.
Channel 5 - Pan fine 16 bit
Channel 6 - Tilt fine 16 bit
The Moving Par can be operated with a controller in control mode or without the controller in stand-alone
mode.
10
Control Panel
When the indicator light is on, means the Moving Par is working
Fig. 6
A
A. Display
B. Audio Sensitivity Adjustment
C. [EXIT] Button
B
C
D
E
F
D. Down Button
E. Up Button
F. [M/ENTER] Button
Control Mode
The fixtures are individually addressed
on a data-link and connected to the controller.
The fixtures respond to the DMX signal from the controller. (When you select the DMX address and save it, the
controller will display the saved DMX address the next time.)
DMX Addressing
The control panel on the front side of the base allows you to assign the DMX fixture address, which is the first
channel from which the Moving Par will respond to the controller.
Please note when you use the controller, the unit has 6 channels.
When using multiple Moving Pars, make sure you set the DMX addresses right.
Therefore, the DMX address of the first Moving Par should be 1(A001); the DMX address of the second
Moving Par should be 1+6=7 (A007); the DMX address of the third Moving Par should be 7+6=13 (A013), etc.
Please, be sure that you don’t have any overlapping channels in order to control each Moving Par
correctly.
If two or more Moving Pars are addressed similarly, they will work similarly.
For address settings, please refer to the instructions under ”Addressing’ (menu
)
Controlling:
After having addressed all Moving Par fixtures, you may now start operating these via your lighting controller.
Note: After switching on, the Moving Par will automatically detect whether DMX 512 data is received or not.
If there is no data received at the DMX-input, the “LED “ on the control panel will not flash.
The problem may be:
- The XLR cable from the controller is not connected with the input of the Moving Par.
- The controller is switched off or defective, the cable or connector is detective, or the signal wires are
swapped in the input connector.
Note: It’s necessary to insert a XLR termination plug (with 120 Ohm) in the last fixture in order to ensure proper
transmission on the DMX data link.
11
Control Panel Functions
Hold for 3 sec
Press Exit to return to the main menu
12
DMX Address selection
Reset unit, the display will
show for 30 seconds
Control Mode selection. Choose one of 4 control modes:
Master Mode
Music-controlled Mode
Slave Mode
DMX Mode
Working Speed selection
80% of the working speed
Maximum working speed
Channel selection
16-bit available for Pan (X) and Tilt (Y)
16-bit not available for Pan (X) and Tilt (Y)
Channel Test selection. First select the channel, then press enter to test the desired channel
Time Menu
Lamp lifetime, hold enter for 5 seconds to reset time to 0
Unit working hours
Display open
Display main Menu
Display close after 10 seconds
Display open
Display close after 10 seconds
Tilt (Y) direction selection
Display words in positive direction
Display words in negative direction
Tilt (Y) direction selection
Lamp lifetime, hold enter for 5 seconds to reset time to 0
Unit working hours
13
Stand-Alone / Slave addressing
Note: Disconnect the fixtures from the DMX controller before master/slave operating, otherwise data
collisions can occur and the fixtures will not work properly!
It’s necessary to insert the XLR termination plug (with 120 Ohm ) into the input of the master fixture and into
the output of the last slave fixture in the data-link, in order to ensure proper transmission on the data link.
From the master’s control panel it is possible to control any slave in a master/slave chain.
1) Only one fixture can be the master. Up to the 16 slaves may be connected to the master.
Stand-alone operation” can be applied to a single fixture (the fixture may be set to the master/slave mode
or controller mode) or to multiple fixture operating synchronously.
For synchronous operation of multiple fixtures the fixtures must all be connected on a data-link and one of
them is set as a master
and the rest as slaves
Hold for 3 sec
The DMX address of all the slaves are assigned to
and on that particular slave address only one
fixture can be connected. To the fixture as the master or slave, see “Addressing” (menu
).
If the master fixture resets or runs a test (program), all slaves will execute these acts too.
You can’t play or edit any program on a slave, if the master is switched on and connected to the
master/slave chain.
Addressing
With this menu you can set the DMX address.
- DMX addressing
1) Press:
Hold for 3 sec
Push to select address
2) The first device should be set to ADDR A001.
14
DMX 512 Channel settings for Moving Aircraft
Code
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
Light No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
Start Channels
A001
A007
A013
A019
A025
A031
A037
A043
A049
A055
A061
A067
A073
A079
A085
A091
A097
A103
A109
A115
A121
A127
A133
A139
A145
A151
A157
A163
A169
A175
A181
A187
A193
A199
A205
A211
A217
A223
A229
A235
Code
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
15
Light No.
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
Start Channels
A241
A247
A253
A259
A265
A271
A277
A283
A289
A295
A301
A307
A313
A319
A325
A331
A337
A343
A349
A355
A361
A367
A373
A379
A385
A391
A397
A403
A409
A415
A421
A427
A433
A439
A445
A451
A457
A463
A469
A475
Channels settings
Maintenance
The operator has to make sure that safety-relating and machine-technical installations are to be inspected
by an expert after every year in the course of an acceptance test.
The operator has to make sure that safety-relating and machine-technical installations are to be inspected
by a skilled person once a year.
The following points have to be considered during the inspection:
1. All screws used for installing the device or parts of the device have to be tightly connected and must
not be corroded.
2. There may not be any deformations on housings, fixations and installation spots.
3. Mechanically moving parts like axles, eyes and others may not show any traces of wearing.
4. The electric power supply cables must not show any damages or material fatigue.
The Showtec Moving Par requires almost no maintenance. However, you should keep the unit clean.
Otherwise, the fixture’s light-output will be significantly reduced. Disconnect the mains power supply, and
then wipe the cover with a damp cloth. Do not immerse in liquid. Wipe lens clean with glass cleaner and a
soft cloth. Do not use alcohol or solvents.
The front lens will require weekly cleaning, as smoke-fluid tends to build up residues, reducing the lightoutput very quickly.
The cooling-fans and the internal lenses should be cleaned monthly with a soft brush.
Please clean internal components once a year with a light brush and vacuum cleaner.
Keep connections clean. Disconnect electric power, and then wipe the DMX and audio connections with a
damp cloth. Make sure connections are thoroughly dry before linking equipment or supplying electric
power.
16
Changing the Lamp
1. Loosen the 2 springs on the back of the head and gently open the back cover.
2. Gently press the large safety spring together and remove the spring.
3. Follow directions for installing a new lamp, page 8.
Replacing a Fuse
Power surges, short-circuit or inappropriate electrical power supply may cause a fuse to burn out. If the fuse
burns out, the product will not function whatsoever. If this happens, follow the directions below to do so.
1. Unplug the unit from electric power source.
2. Insert a flat-head screwdriver into a slot in the fuse cover. Gently pry up the fuse cover. The fuse will
come out.
3. Remove the used fuse. If brown or unclear, it is burned out.
4. Insert the replacement fuse into the holder where the old fuse was. Reinsert the fuse cover. Be sure to
use a fuse of the same type and specification. See the product specification label for details.
Troubleshooting
No Light, No Movement - All Products
This troubleshooting guide is meant to help solve simple problems. If a problem occurs, carry out the steps
below in sequence until a solution is found. Once the unit operates properly, do not carry out following steps.
If the light effect does not operate properly, refer servicing to a technician.
Response: Suspect three potential problem areas: the power supply, the lamp, the fuse.
1. Power supply. Check that the unit is plugged into an appropriate power supply.
2. The lamp. Replace the old lamp with a new one with the same specifications. See page 8 for replacing
lamps.
3. The fuse. Replace the fuse. See page 17 for replacing the fuse.
No Response to DMX
Response: Suspect the DMX cable or connectors, a controller malfunction, a light effect DMX card
malfunction.
1. Check the DMX cable: Unplug the unit; change the DMX cable; then reconnect to electrical power. Try
your DMX control again.
2. Determine whether the controller or light effect is at fault. Does the controller operate properly with other
DMX products ? If not, take the controller in for repair. If so, take the DMX cable and the light effect to a
qualified technician.
See next page for more problem solving.
17
Problem
One or more
fixtures are
completely dead.
Fixtures reset
correctly, but all
respond
erratically or not
at all to the
controller.
Probable cause(s)
No power to the fixture
Remedy
· Check that power is switched on
And cables are plugged in.
Primary fuse blown.
· Replace fuse.
The controller is not connected.
3-pin XLR Out of the controller
does not match XLR Out of the first
fixture on the link (i.e. signal is
reversed).
· Connect controller.
· Install a phase reversing cable
between the controller and the first
fixture on the link.
· Check data quality. If much lower
than 100 percent, the problem may
be a bad data link connection, poor
quality or broken cables, missing
termination plug, or a defective
fixture disturbing the link.
Poor data quality
Bad data link connection
Fixtures reset
correctly, but
some respond
erratically or not
at all to the
controller.
Data link not terminated with 120
Ohm termination plug.
Incorrect addressing of the fixtures.
One of the fixtures is defective and
disturbs data transmission on the
link.
3-pin XLR Out on the fixtures does
not match (pins 2 and 3 reversed).
Shutter closes
suddenly
No light
Lamp cuts out
intermittently.
The color wheel, gobo wheel, or a
gobo has lost its index position and
the fixture is resetting the effect.
The power supply settings do not
match local AC voltage and
frequency.
Lamp missing or blown
Fixture is too hot.
The power supply settings do not
match local AC voltage and
frequency.
18
· Inspect connections and cables.
Correct poor connections. Repair or
replace damaged cables.
· Insert termination plug in output jack
of the last fixture on the link.
· Check address setting.
· Bypass one fixture at a time until
normal operation is regained: unplug
both connectors and connect them
directly together.
· Have the defective fixture serviced
by a qualified technician.
· Install a phase-reversing cable
between the fixtures or swap pin 2
and 3 in the fixture, that behaves
erratically.
· Contact a technician for servicing if
the problem persists.
· Disconnect fixture. Check settings
and correct if necessary.
· Disconnect fixture and replace lamp.
· Allow fixture to cool.
· Clean fan.
· Make sure air vents at control panel
and front lens are not blocked.
· Turn up the air conditioning.
· Disconnect fixture. Check settings
and correct if necessary.
Product Specification
Model: Showtec Moving Aircraft
Voltage: 240V-50Hz (CE)
Fuse: 6A / 250V
Dimensions: 370x150x450mm (LxWxH)
Weight: 8,54 kg
Operation and Programming
Signal pin OUT: pin 1 earth, pin 2 (-), pin 3 (+)
Set Up and Addressing: LED control panel
DMX Channels: 6
Signal input 3-pin XLR male
Signal output 3-pin XLR female
Lamp
Allowed lamp models*:
Showtec Par 64 28V 250W (25 hr) ordercode 80111
Control: Automatic and DMX remote ON / OFF
Electro-mechanical effects
Strobe-effect with variable speed (1 flash -- 10 flashes/sec.)
DMX-control via standard DMX-controller
Pan 0º -- 540º
Tilt 0º -- 180º
Automatic Pan / Tilt position correction
Gobos
Max. ambient temperature ta: 40°C; Max. housing temperature tB: 80°C
Cooling: 3 axial fans - two fan in the projector and one in the base
Motor: high quality stepping-motor controlled by microprocessors
Minimum distance:
Minimum distance from flammable surfaces: 0.5m
Minimum distance to lighted object: 2m
*: Versions for other lamps may be produced. Please check the specification label on your product.
Design and product specifications are subject to change without prior notice.
Website: www.Highlite.nl
Email: service@highlite.nl
19
2007 Showtec.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising