WIDE LCD TV Model No. TX-26LXD70A TX

WIDE LCD TV Model No. TX-26LXD70A TX
WARRANTY - Australia only
1. The product is warranted for 12 months from the date of purchase. Subject to the conditions of this warranty Panasonic or it’s Authorised
Service Centre will perform necessary service on the product without charge for parts or labour if, in the opinion of Panasonic, the product is
found to be faulty within the warranty period.
2. This warranty only applies to Panasonic products purchased in Australia and sold by Panasonic Australia or its Authorised Distributors or Dealers
and only where the products are used and serviced within Australia or it’s territories. Warranty cover only applies to service carried out by a
Panasonic Authorised Service Centre and only if valid proof of purchase is presented when warranty service is requested.
3. This warranty only applies if the product has been installed and used in accordance with the manufacturer’s recommendations (as noted in the
operating instructions) under normal use and reasonable care (in the opinion of Panasonic). The warranty covers normal domestic use only
and does not cover damage, malfunction or failure resulting from use of incorrect voltages, incorrect installation, accident, misuse, neglect,
build-up of dirt or dust, abuse, maladjustment of customer controls, mains supply problems, thunderstorm activity, infestation by insects or
vermin, tampering or repair by unauthorised persons (including unauthorised alterations), exposure to abnormally corrosive conditions or any
foreign object or matter having entered the product.
4. This warranty does not cover the following items unless the fault or defect existed at the time of purchase:
(a) Video or Audio Tapes
(d) Cabinet Parts
(g) Microwave Oven cook plates.
(b) Video or Audio Heads and Stylii resulting
(e) User replaceable Batteries
(h) Kneader mounting shaft unit
from wear and tear in normal use
(f) Thermal Paper, Toner/Ink Cartridges,
(bread bakery)
(c) Shaver Heads or Cutters
Drums, Developer, Film (Ink/Ribbon),
Film Cartridge, Printer Heads
5. If warranty service is required you should:
• Telephone Panasonic’s Customer Care Centre on 132600 or visit our website and use the Service Centre Locator for the name/address of
the nearest Authorised Service Centre.
• Send or bring the product to a Panasonic Authorised Service Centre together with your proof of purchase receipt as a proof of purchase date.
Please note that freight and insurance to and / or from your nearest Authorised Service Centre must be arranged by you.
• Note that home or pick-up/delivery service is available for the following products in the major metropolitan areas of Australia or the normal
operating areas of the nearest Authorised Service Centres:
(a) Picture tube (CRT) based Television Receivers (screen
(b) Convection/Combination Microwave Ovens
sizes greater than 66cm); Rear Projection TV’s; Plasma/LCD
(c) Whiteboard (except portable type)
televisions / displays (screen size greater than 103 cm)
6. The warranties hereby conferred do not extend to, and exclude, any costs associated with the installation, de-installation or re-installation of a
product, including costs related to the mounting, de-mounting or remounting of any screen, (and any other ancillary activities), delivery,
handling, freighting, transportation or insurance of the product or any part thereof or replacement of and do not extend to, and exclude, any
damage or loss occurring by reason of, during, associated with, or related to such installation, de-installation, re-installation or transit.
Panasonic Authorised Service Centres are located in major metropolitan areas and most regional centres of Australia, however, coverage will vary
dependant on product. For advice on exact Authorised Service Centre locations for your product, please telephone our Customer Care Centre on
132600 or visit our website and use the Service Centre Locator.
Unless otherwise specified to the consumer the benefits conferred by this express warranty are additional to all other conditions, warranties,
guarantees, rights and remedies expressed or implied by the Trade Practices Act 1974 and similar consumer protection provisions contained in
legislation of the States and Territories and all other obligations and liabilities on the part of the manufacturer or supplier and nothing contained
herein shall restrict or modify such rights, remedies, obligations or liabilities.
November 2005
Operating Instructions
WIDE LCD TV
Model No.
THIS WARRANTY CARD AND THE PURCHASE DOCKET (OR SIMILAR PROOF OF PURCHASE)
SHOULD BE RETAINED BY THE CUSTOMER AT ALL TIMES
If you require assistance regarding warranty conditions or any other enquiries,
please visit the Panasonic Australia website
www.panasonic.com.au or by phone on 132 600
If phoning in, please ensure you have your operating instructions available.
POWER
INPUT
GUIDE
MENU
RETURN
R
G
Y
ASPECT
ACN 001 592 187 ABN 83 001 592 187
Locked Bag 505, Frenchs Forest, NSW 2086
www.panasonic.com.au
EXIT
OK
Panasonic Australia Pty. Limited
PRO-031-F01 Issue: 3.0
TX-26LXD70A
TX-32LXD70A
B
OPTION
1
2
3
4
5
6
7
8
9
0
INFO
MUTE
CH
23-11-2005
VOL
TEXT STTL INDEX HOLD
POWER REC
VCR
DVD
PROGRAMME
TV
Customer’s Record
The model number and serial number of this product may be found on its rear panel. You should note this serial
number in the space provided below and retain this book, plus your purchase receipt, as a permanent record of your
purchase to aid in identification in the event of theft or loss, and for Warranty Service purposes.
Model Number
Serial Number
English
Matsushita Electric Industrial Co., Ltd.
Please read these instructions before operating your set and retain them for future reference.
The images shown in this manual are for illustrative purposes only.
Web Site : http://panasonic.net/
© 2007 Matsushita Electric Industrial Co., Ltd. All Rights Reserved.
Printed in China
TQB0A0184
Turn your own living room into a movie theatre!
Experience an amazing level of multiReceive digital terrestrial services using an integrated (Digital Video Broadcasting) tuner
Sharp pictures with HDMI terminal
Create home theatre and DVD recorder link-ups with
“VIERA Link” without complicated settings!
media excitement
Contents
Be Sure to Read
•
••
Safety Precautions ······································ 4
(Warning / Caution)
Notes ··························································· 5
Maintenance ··············································· 5
Enjoy rich multi-media
Personal
computer
DVD Recorder
Set top box
Enjoy your TV!
Basic Features
VCR
DVD player
••
••
Watching TV ·············································· 10
Using TV Guide ········································· 12
Watching Videos and DVDs ······················ 14
Viewing Teletext ········································ 16
Viewing
Amplifier with
Speaker system
Quick Start Guide
Camcorder
Quick Start Guide
Accessories / Options ·········· 6
Identifying Controls ··············· 7
Basic Connection ··················· 8
Auto Tuning······························· 9
Advanced Features
How to Use Menu Functions ····················· 18
(picture, sound quality, etc.)
DVB Settings (DVB) ·································· 22
Editing and Setting Channels ···················· 24
Restore Settings ······································ 26
Input Labels ·············································· 27
Displaying PC Screen on TV····················· 28
HDMI Functions ········································ 29
VIERA Link “HDAVI ControlTM”··················· 30
External Equipment ··································· 32
Trade Mark of the DVB Digital Video Broadcasting Project (1991 to 1996)
TX-26LXD70A Declaration of Conformity No 4595, 28 February 2007
TX-32LXD70A Declaration of Conformity No 4594, 28 February 2007
2
••
••
Technical Information ································ 34
FAQs ························································· 37
Licence ······················································ 39
Specifications ············································ 39
FAQs, etc.
FAQs, etc.
Advanced
•
••
•••
••
•
3
Safety Precautions
Notes
Warning
Auto power standby function
Caution
If no signal is received and no operation is
performed in TV mode for 30 minutes, the TV will
automatically go to standby mode.
When cleaning the TV, remove the
mains plug
Handling the mains plug and lead
Insert the mains plug fully into the socket outlet. (If the mains plug is loose, it could generate heat and cause fire.)
Ensure that the mains plug is easily accessible.
Do not touch the mains plug with a wet hand. (This may cause electrical shock.)
Do not damage the mains lead. (A damaged lead may cause fire or electrical shock.)
Do not move the TV with the lead plugged in the socket outlet.
Do not place a heavy object on the lead or place the lead near a high-temperature object.
Do not twist the lead, bend it excessively, or stretch it.
Do not pull on the lead. Hold onto the mains plug body when disconnecting lead.
Do not use a damaged mains plug or socket outlet.
(Cleaning an energized TV may cause
electrical shock.)
Keep the TV away from these equipment
Electronic equipment
In particular, do not place video equipment near the
TV (electromagnetic interference may distort images
/ sound).
Equipment with an infrared sensor
This TV also emits infrared rays (this may affect
operation of other equipment).
When TV will not be used for a
long time, remove the mains plug
This TV will still consume some power even
in the Off mode, as long as the mains plug is
still connected to a live socket outlet.
Allow sufficient space around the
TV for radiated heat
Minimum distance
Transport only in upright position
10
If you find any
abnormality,
remove the
mains plug immediately!
10
10
10
(cm)
TV Stand
Do not block the rear air vents
Blocked ventilation by curtains,
etc. may cause overheating, fire
or electrical shock.
AC 220-240 V
50 / 60 Hz
Maintenance
Do not remove covers
NEVER modify the TV yourself
(High-voltage components may cause serious
electrical shock.)
Have the TV checked, adjusted, or repaired at your
local Panasonic dealer.
Keep liquids away from the TV
To prevent damage which may result in fire or
shock hazard, do not expose this appliance to
dripping or splashing.
Do not place containers with water (flower vase,
cups, cosmetics, etc.) above the TV. (including on
shelves above, etc.)
Do not expose to direct sunlight
and other sources of heat
Avoid exposing the TV to direct sunlight and other
sources of heat. To prevent fire never place any
type of candle or naked flame on top or near the TV.
4
First, remove the mains plug from the socket outlet.
Do not place foreign objects
inside the TV
Do not let metal or flammable objects drop into the
TV through the air vents (fire or electrical shock
may result).
Do not place the TV on sloped
or unstable surfaces
The TV may fall off or tip over.
Use only the dedicated stands
/ mounting equipment
Using an unauthorized stand or other fixtures may
make the TV shaky, risking injury. Be sure to ask
your local Panasonic dealer to perform setup.
Use optional stands / mounts (p. 6).
Display panel
Regular care: Gently wipe the surface clean of dirt by using a soft cloth.
Major contamination: Wipe the surface clean using a soft cloth dampened with clean water or diluted neutral
detergent by 100 times of water. Then, using a soft dry cloth, evenly wipe the surface clean until it is dry.
Caution
•
•
The surface of the display panel has been specially treated and may be easily damaged.
Do not tap or scratch the surface with your fingernail or other hard object.
Use care not to subject the surface to bug repellent, solvent, thinner, or other volatile substances
(this may degrade surface quality).
Cabinet
Regular care: Wipe the surface clean using a soft dry cloth.
Major contamination: Dampen a soft cloth with clean water or water containing a small amount of neutral detergent.
Then, wring the cloth and wipe the surface clean with it. Finally, wipe the surface clean with a dry cloth.
Caution
•
•
•
Use care not to subject the TV's surfaces to detergent.
(A liquid inside the TV could lead to product failure.)
Use care not to subject surfaces to bug repellent, solvent, thinner, or other volatile substances
(this may deteriorate the surface by peeling the paint).
Do not allow the cabinet to make contact with a rubber or PVC substance for a long time.
Mains plug
Wipe the mains plug with a dry cloth at regular intervals. (Moisture and dust may lead to fire or electrical shock.)
5
Accessories / Options
Standard accessories
Remote Control
Transmitter
•
EUR7651150
Check that you have the accessories and items shown
Batteries for the Remote
Control Transmitter (2)
OK
1
2
3
4
5
6
7
8
9
0
CH
Identifying Controls
•
Mains power
On / Off switch
Operating Instructions
F
Guarantee
R6 (AA)
TV
Function select
/ Contrast / Brightness /
•Volume
Colour / Sharpness /
VOL
AV
Changes the input mode
Increases or decreases the programme
position by one. When a function is
already displayed, press to increase or
decrease the selected function. When in
Standby mode, switches TV On.
Tint (NTSC mode) / Bass / Treble /
Balance / Auto Tuning (p. 24)
TV
Remote control signal receiver
(senses brightness to adjust picture quality in “Auto” Menu in Picture Menu) (p. 20)
Power LED
•
Installing remote’s batteries
1
Pull
open
2
Close
INPUT
Wall-hanging
bracket
Please contact your nearest Panasonic dealer to purchase the
recommended wall-hanging bracket. For additional details, please
refer to the wall-hanging bracket installation manual.
GUIDE
OK button to confirm selections and choices
Press after selecting programme positions
to quickly change programme.
Main Menu
Press to access VIERA Link, Picture,
Sound and Setup menus (p. 18)
Changes aspect ratio (p. 11)
EXIT
EXIT (Returns to TV screen)
OK
MENU
RETURN
Returns to the previous menu
R
G
Y
ASPECT
B
OPTION
Access VIERA Link Menu (p. 31)
1
2
3
Programme / service change buttons (0-9)
and Teletext page buttons. (p. 10 and p. 16)
When in Standby mode, switches TV On.
4
5
6
7
8
9
Programme Information (p. 11)
0
INFO
Selects services in sequence
Cursor buttons to make selections and
adjustments
MUTE
CH
Coloured buttons used for the
selection, navigation and operation of
various functions
Changes the sound track, if programme
has multiple audio tracks (DVB)
Stereo / Bilingual Sound Selection
Identifying Controls
Accessories / Options
Incorrect installation may cause battery leakage and corrosion, resulting in damage to the remote control.
Do not mix old and new batteries.
Do not mix different battery types (such as alkaline and manganese batteries).
Do not use rechargeable (Ni-Cd) batteries.
Do not burn or breakup batteries.
TV Guide (p. 12)
••
Note the correct
polarity (+ or -)
Caution
Optional accessories
Changes the input mode
TV - switches DVB (digital broadcasting)
/ Analogue mode (p. 10)
AV - changes AV input mode (p. 14)
POWER
+
-
••
••
•
Standby On / Off switch
(Switches TV On or Off standby)
+
-
Hook
Standby: red
On: green
Quick Start Guide
C.A.T.S. (Contrast Automatic Tracking System) sensor
(p. 35) (Analogue)
Option menu
Sets the preferred settings of the
current programme easily (p. 11)
Sound mute On / Off
Volume
VOL
TY-WK32LR2W
WARNING!
•
•
•
6
Failure to use a Panasonic bracket or choosing to mount the unit
yourself will be done at the risk of the consumer.
Any damage resulting from not having a professional installer mount
your unit will void your warranty.
Always be sure to ask a qualified technician to carry out set-up.
Incorrect fitting may cause equipment to fall, resulting in injury and
product damage.
Do not mount the unit directly below ceiling lights (such as
spotlights, floodlights or halogen lights) which typically give off high
heat. Doing so may warp or damage plastic cabinet parts.
How to remove the TV Stand
Remove four screws.
Teletext (p. 16)
Subtitles
Showing subtitles (p. 11)
TEXT STTL INDEX HOLD
POWER REC
PROGRAMME
VCR
DVD
Still picture (p. 11)
Teletext Hold (p. 17)
Teletext Index (p. 17)
VCR / DVD operations (p. 15)
TV
Rear of the TV
7
Basic Connection
Auto Tuning
External equipment and cables shown are not supplied with this TV.
Please ensure that the unit is disconnected from the mains socket before attaching or disconnecting any leads.
Search and store TV channels automatically.
These steps are not necessary if the setup has been completed by your local dealer.
Example 1
Connecting aerial
Example 2
Connecting DVD Recorder / VCR
TV only
TV, DVD Recorder or VCR
Rear of the TV
•
Aerial
If your recorder is not available for DVB
Rear of the TV
AC 220-240 V
50 / 60 Hz
ASPECT
RF
cable
EXIT
OK
Mains lead
MENU
DIGITAL AUDIO OUT
L
AUDIO
IN
DIGITAL AUDIO OUT
L
R
RETURN
PC
PC
AV1 IN
AV2 IN
VIDEO
COMPONENT
AV2 IN
COMPONENT
S VIDEO
MONITOR
OUT
Y
VIDEO
Y
Y
1
2
3
Y
4
5
6
PB/CB
7
8
9
COMPONENT
VIDEO
VIDEO
MONO
MONO
PB/CB
MONO
PB/CB
MONO
MONO
PB/CB
MONO
L
L
select
Start Auto Tuning
Auto Tuning - Digital and Analogue
Digital Tuning
Analogue Tuning
6
0
RF Ch
Service Name
2
ABC TV Sydney
3
SBS DIGITAL 1
4
FTV guide
7
7 Digital
9
NINE DIGITAL
CH 29
CH 33
BBC1
This will take about 3 mins.
69
75
Type
DVB
DVB
DVB
DVB
DVB
Analogue
Analogue
Quality
10
10
10
10
10
-
•
EXIT
L
L
AUDIO
AV3 IN
New South Wales / Australian Capital Territory
Victoria
Queensland
South Australia
Western Australia
Northern Territory
Tasmania
PR/CR
PR/CR
R
AUDIO
PR/CR
0
PR/CR
R
VCR
R
R
Auto Tuning is now complete and your TV is ready for viewing.
AUDIO
AUDIO
Auto Tuning will start to search
for TV services and store them
in the numbered order as
specified by the broadcasters.
TEXT
F.P.
REC
•
•
•
INDEX HOLD
VCR
DVD
PROGRAMME
Many features available on this TV can be accessed via the On Screen Display menu.
RF cable
VIDEO AUDIO
OUT OUT
To edit channels
Editing and Setting Channels (p. 24)
If tuning has failed
“Auto Tuning” (p. 24).
If you turned the TV Off during Standby
mode last time, the TV will be in
Standby mode when you turn the TV
On with Mains power On / Off switch.
Auto Tuning
Basic Connection
COMPONENT
S VIDEO
MONITOR
OUT
AV1 IN
AV3 IN
Select State / Territory
••
3
OPTION DIRECT TV REC
You can now use the remote
control to turn On the TV or
turn the TV to standby mode.
(Power LED: On)
Quick Start Guide
INPUT
R
•
p. 38
POWER
AUDIO
IN
2
Select your state
(Takes a few seconds to be displayed)
Aerial
AC 220-240 V
50 / 60 Hz
Mains lead
1
Plug the TV into mains socket and switch On
■ How to use remote control
MENU
RF IN
Open the main menu
■ ON SCREEN HELP Instructions box
(example: Sound Menu)
Sound Menu
DVD Recorder or VCR
RF OUT
Move the cursor / select the menu
RF cable
••
•
•
•
8 •
Note
Do not put the RF cable close to the mains lead to avoid noise.
Do not place the RF cable under the TV.
To obtain optimum quality picture and sound, an Aerial, the correct cable (75 Ω coaxial) and the correct
terminating plug are required.
If a communal Aerial system is used, you may require the correct connection cable and plug between the wall
Aerial socket and the TV.
Your local Television Service Centre or dealer may be able to assist you in obtaining the correct Aerial system for
your particular area and the accessories required.
Any matters regarding Aerial installation, upgrading of existing systems or accessories required, and the costs
incurred, are the responsibility of you, the Customer.
Using the
On Screen
Displays
Move the cursor / adjust levels /
select from a range of options
Access the menu / store settings
after adjustments have been made
or options have been set
RETURN
EXIT
Return to the previous menu
Exit the menu system and
return to the normal viewing screen
Mode
Bass
Treble
Balance
Headphone Volume
Surround
Volume Correction
Reset Sound Default
Select
Music
Off
Set
EXIT
Change
RETURN
On-screen operation
guide will help you.
9
Watching TV
■ Other useful functions (Operate after
1
2
POWER
Turn power on
Mains power On / Off switch should be On.
POWER
Select DVB (Digital Video Broadcasting) or Analogue
INPUT
ASPECT
EXIT
1 TEN Digital
OK
MENU
•
RETURN
R
G
Y
B
All DVB Services
Select FAV List
For info press
10:30 am
Corontation Street
9:00 am - 11:00 am
Now
Information banner
Hold
Freeze / unfreeze picture
HOLD
Display
subtitles
Display / hide subtitles (if available)
STTL
Display the
current
programme
status
You can also select the mode using the TV button on the top panel
of the TV.
•
This is the same as turning the teletext on and selecting P801.
Check or change the current
programme status instantly
OPTION
Volume Correction
Adjusts volume of individual channel or input mode
•
Note
Also possible to change the settings in Menu list (p. 20).
OPTION DIRECT TV REC
ASPECT
2
3
4
5
6
8
3
9
up
Volume
VOL
INFO
1
2
3
4
5
6
7
8
9
Programme
0
DVD
Corontation Street
To select the two or three-digit programme number, e.g. 39
3
9 (in a short time)
■ Select a service using Information banner
Display
information
banner
watch
1 TEN Digital
Corontation Street
9:00 am - 11:00 am
10:30 am
Now
All DVB Services
Select FAV List
For info press
9:00 am - 11:00 am
Now
DVB: Programme
Rating: PG
Bad Signal Dolby D STTL TEXT
45
Features available
Start / Finish time Mute
Analogue: Programme Sound Rating
Dolby
Teletext
Off timer
Status
mute information (p. 34)
Digital
Multiple audio
Stereo sound Weak TV signal Subtitle
•
•
•
•
TV
■ Select a service using TV Guide
Information of another channel
Change the aspect ratio (p. 34)
“Using TV Guide” (p. 12)
B
To change the Fav List
(If you have defined a Fav List)
All DVB Services
Select FAV List
For info press
Information on next programme
(DVB)
To watch the programme listed in the banner
Information banner operation
INFO
2nd press
1st press
Banner + programme synopsis
Display banner
(DVB)
INFO
PROGRAMME
10:30 am
Current
favourite list
•
•
•
To set display timeout
“Banner Display Timeout” (p. 21)
To hide
EXIT
Appears also when changing service.
3rd press
Exit
ASPECT
Aspect Selection
16:9
14:9
Just
4:3
4:3 Full
Zoom1
Zoom2
Zoom3
Enjoy viewing the picture at its optimum size and aspect.
Change
aspect
ratio
•
•
Aspect Selection list
To change the mode
Display Aspect ASPECT
During the list is displayed,
Selection list
select the mode
To change the mode using the ASPECT button only
•
Watching TV
VCR
Current time
1 TEN Digital
select service
REC
Service
•
TEXT STTL INDEX HOLD
or
CH
•
INFO
CH
Select a service
down
0
Display programme information
Viewing
1
7
10
)
Select
Change
EXIT
RETURN
Store
ASPECT
(Press repeatedly until you reach the desired mode)
Note
In DVB mode, aspect ratio is fixed at 16:9.
11
Using TV Guide
TV Guide―Electronic Programme Guide (EPG) provides an on-screen listing of programmes currently
broadcast and future broadcasts over the next seven days (depending on the broadcaster).
Analogue broadcasts will be listed after DVB broadcasts. “D” means DVB channel and “A” means
Analogue channel.
GUIDE
POWER
■ Other useful functions (Operate after viewing TV Guide)
View TV Guide
View details
of the
programme
(DVB mode)
INPUT
GUIDE
Programme
EXIT
TV Guide
date
OK
MENU
RETURN
Wed 12/05/04 10:15 am
Wed 12th May
G
Y
Favourites
View details
TV Guide
To return
to the start page
Thu 05/08/04 10:49 am
select
Details
INFO
EXIT
INFO
Return to List
View
RETURN
Service
D
R
Current date and time
Select
the programme
1 TEN Digital D
2 ABC TV Sydney D
3 SBS DIGITAL D
4 FTV guide
D
7 7 Digital
9:30 am - 10:00 am
B
10:00 am - 10:30 am
ASPECT
10:30 am - 11:00 am
OPTION
11:00 am - 11:30 am
11:30 am - 1:00 pm
1
2
3
4
5
6
7
8
9
MUTE
CH
3:00 pm - 3:10 pm
+24 Hr
-24 Hr
Prog.type
Watch the
programme
Favourites
R
■ To next day (DVB mode)
G
•
DVD
■ To view a
PROGRAMME
TV
All Type s
Movie s
select
type
New s
Entertainmen t
Spor t
Children’s
■ To return to TV
view
Music
Arts/Culture
EXIT
Current Affairs
Education/Information
Infotainment
Special
Comedy
Drama
Using TV Guide
Y
(Type list)
When this TV is turned on for the first time, or the TV is switched off for more than a week, it may take some time
before the TV Guide is completely shown.
•
programme list
of the
selected type
(DVB mode)
Prog. type
All Type s
Note
Viewing
TEXT STTL INDEX HOLD
VCR
select
watch
■ To previous day (DVB mode)
VOL
POWER REC
(TV screen)
Select programme
EXIT
Select service
View
RETURN
(Displays by time)
0
INFO
Select the programme now on the air
1:00 pm - 3:00 pm
Documentary
■ To view a
programme list
of the selected
favourites list
B
Favourites
Categor y
All Service s
(Favourites list)
All Service s
All DVB Services
All Analogue Services
Only analogue TV services are listed
Free TV
FavList1
Profile
FavList2
Pay TV
Profile
FavList3
Profile
FavList4
To list favourite
services (p. 23)
12
select
favourite
list
view
13
Watching Videos and DVDs
Connect the external equipment (VCRs, DVD equipment, etc.) and you can watch the input.
To connect the equipment (p. 8)
The Remote Control is capable of operating some functions of selected Panasonic external equipment.
Panasonic equipment connected to the TV can be directly operated with the remote control.
VCR
1
DVD
Display the Input select menu
Standby
Set to Standby mode / Turn on
POWER
Play
Playback videocassette / DVD
INPUT
ASPECT
EXIT
OK
MENU
RETURN
2
OPTION DIRECT TV REC
1
2
3
4
5
6
7
8
9
INDEX HOLD
POWER REC
VCR
Input Selection
AV1
AV2
AV3
AV4
PC
HDMI1
HDMI2
TV
3
Stop
Stop the operations
watch
select
Rewind / Skip / Search
VCR: Rewind, view the picture rapidly in reverse
DVD: Skip to the previous track or title
Press and hold to search backward
You can also select the input using the AV button on the remote
control or the top panel of the TV.
Press the button repeatedly until the desired input is selected.
You can label or skip each input modes “Input Labels” (p. 27)
Fast-forward / Skip / Search
VCR: Fast-forward, view the picture rapidly forward
DVD: Skip to the next track or title
Press and hold to search forward
View
Displays the selected mode
Pause
Pause / Restart
DVD: Press and hold to play at slow speed
DVD
•
PROGRAMME
Record
Start recording
REC
TV
■ To return to TV
Programme Up / Down
Select programme
∗Setting your remote control to operate Panasonic VCR, DVD, etc.
VCR
Set the VCR / DVD switch to the appropriate position
DVD
POWER
Press and hold
during the following operations
1
2
Enter the appropriate code for the equipment 4 5
to be controlled, see table below
7
8
••
14
3
6
9
Press
Watching Videos and DVDs
PROGRAMME
Viewing
F.P.
Select the input mode connected to the equipment
•
•
0
TEXT
∗
VCR / DVD switch
Select VCR to operate Panasonic VCR or DVD equipment
Select DVD to operate Panasonic DVD equipment or Player home theatre
0
Note
“VCR” position
Equipment
VCR
DVD
If the external equipment has an aspect adjustment function, set to “16:9”.
For details, see the manual of the equipment or ask your local dealer.
••
••
Code
10 (default)
11
“DVD” position
Equipment
DVD
Player home theatre
Code
70 (default)
71
Note
Confirm correct operation after the code changed.
The codes will be reset to default values if batteries are replaced.
“DVD” means DVD player, DVD recorders and Recorder home theatre.
Some operations may not be possible on some equipment models.
15
Viewing Teletext
You can enjoy teletext broadcasting, including news, weather forecasts and subtitles, if this service is
provided by the broadcasters.
What is FASTEXT mode?
In FASTEXT mode, four differently coloured subjects are situated at the bottom of the screen. To access more
information about one of these subjects, press the appropriately coloured button. This facility enables fast access to
information on the subjects shown.
If you wish to hold the current page without updating
HOLD
What is TOP mode? (in case of TOP text broadcasting)
TOP is a particular improvement of the standard teletext service that results in an easier search and effective guide.
Fast overview of the teletext information available
Easy to use step-by-step selection of the topical subject
Page status information at the bottom of the screen
••
•
Available page up / down
R
To select among subject blocks
G
B
To select next subject within the subject block
(After the last subject, it moves to the next subject block.)
Y
What is List mode?
In List mode, four differently coloured page numbers are situated at the bottom of the screen. Each of these
numbers can be altered and stored in the TV’s memory. (“Store frequently viewed pages”, p. 17)
■ To change mode
1
INPUT
ASPECT
“Teletext” in Setup Menu (p. 21)
EXIT
•
MENU
<< 01 02 03 04 05 06 07
Displays Index
(content varies
depending on the
broadcasters)
Current
page
number
Time / date
TELETEXT
INFORMATION
Store
frequently
viewed
pages
RETURN
G
Y
B
OPTION DIRECT TV REC
1
2
3
6
7
8
9
1
2
3
4
5
6
7
8
9
down
■
TEXT STTL INDEX HOLD
R
G
Y
press
and
hold
Corresponding
colour button
■ To change stored pages
The number changes to white.
Enter new page number
1
2
3
4
5
6
7
8
9
press
and
hold
0
MENU
Appears at upper-left
corner of the screen
As the blue bar is displayed
View sub
page
TEXT
To return to TV
■ To view specific sub page
MENU
•
DVD
Enter the
4-digit number
B
example: P6
6
0
0
0
Sub pages:
The number of sub pages varies depending on the broadcasters (up to 79 pages).
It may take some time for searching, during which time you can watch TV.
Reveal hidden words e.g. quiz page answers
MENU
R
•
Re-hide
MENU
View the TV picture while searching for a teletext page
R
(TOP)
(BOTTOM)
G
(Expand the TOP half)
16
As page is
displayed
(List mode only)
(Corresponds to the colour bar)
PROGRAMME
FULL /
TOP /
BOTTOM
Select Picture and text
On or Off
Operations can be made only in Teletext screen.
B
■ Using teletext conveniently
Reveal
hidden
data
•
•
(Press twice)
View sub page (Only when teletext is more than one page)
■ To adjust contrast
VCR
MENU
Colour button you
want to change
or
0
Call up the page stored in “blue”.
Factory setting is “P801” (subtitle page).
Watch TV and Teletext in two windows at once
up
or
••
STTL
Select the page
0
REC
INDEX
Viewing Teletext
5
Return to the main index page
•
4
2
HOLD
Store frequently viewed pages in the colour bar
>>
17:51 28 Feb
Colour bar
R
View in
multi
window
■ To resume
HOLD
Viewing
OK
Call up a
favourite
pages
Sub page number
Switch to Teletext
TEXT
INDEX
Stop or resume automatic updating
(Expand the BOTTOM half)
Normal (FULL)
Watch
TV while
waiting
for update
Teletext automatically updates itself when new information becomes available.
Changes to TV screen temporarily
P108
MENU
Y
•
Appears
when
updating is
completed
Y
View the
updated
page
(You cannot change the channel.)
The news page provides a function that indicates arrival of latest news (“News Flash”).
17
How to Use Menu Functions
Various menus allow you to make settings for the picture, sound, and other functions.
1
■ Overview
Display the menu
MENU
•
Main Menu
Displays the functions that can be set
(varies according to the input signal)
VIERA Link
INPUT
ASPECT
Picture
VIERA Link Control
Speaker Selection
OK
RETURN
2
(p. 31)
Sound
Select the menu
Setup
access
Main Menu
Picture Menu
VIERA Link
Viewing Mode
Contrast
Brightness
Colour
Sharpness
Tint
Colour Balance
Colour Management
P-NR
Picture
select
Sound
OPTION DIRECT TV REC
SURROUND
1
2
3
4
5
6
9
0
VCR
CH
F.P.
Select the item
Picture Menu
Viewing Mode
Contrast
Brightness
Colour
Sharpness
Tint
Colour Balance
Colour Management
P-NR
INDEX HOLD
REC
VCR
DVD
PROGRAMME
TV
■ To return to TV
at any time
Picture Menu
MPEG NR
3D-COMB
Reset Picture Default
select
(p. 20)
Warm
Off
Off
Picture Menu
Mode
Bass
Treble
Balance
Headphone Volume
Surround
Volume Correction
Audio Preference
SPDIF Selection
1/2
Auto
change
store or access
(Required by some
functions)
Warm
Off
Off
1/2
Sound Menu
Adjust or select
Viewing Mode
Contrast
Brightness
Colour
Sharpness
Tint
Colour Balance
Colour Management
P-NR
2/2
Off
Off
Set
Music
Off
MPEG
PCM
Sound Menu
(example: Picture Menu)
2/2
MPEG Audio Level
HDMI1 Input
0dB
Auto
Reset Sound Default
Set
■ Choose from among alternatives
(p. 20)
Advanced
EXIT
1/2
Auto
(example: Picture Menu)
4
Warm
Off
Off
How to Use Menu Functions
(picture, sound quality, etc.)
8
(example: Picture Menu)
1/2
Auto
•
7
Setup
3
The menu of the accessed
equipment
Recorder
Home Cinema
EXIT
MENU
TEXT
VIERA Link Menu
Number and positions
of alternatives
■ To return to the
previous screen
RETURN
Colour Balance
Normal
Setup Menu
Changed
DVB Favourites Edit
Tuning Menu
Off Timer
Teletext
Shipping Condition
System Update
Input Labels
Banner Display Timeout
VIERA Link Settings
■ Adjust using the slide bar
Sharpness
•
Moved
Note
To initialize all settings
“Shipping Condition”
(p. 26)
■ Go to the next screen
Tuning Menu
1/2
Access
Access
Off
TOP
Access
Access
Access
3 seconds
Access
Setup Menu
Region Select
Daylight Saving Time
Software License
System Information
Access
Displays the next screen
■ To change menu pages
Tuning Menu
Auto Tuning
Analogue Programme Edit
DVB Manual Tuning
Analogue Manual Tuning
Add New DVB Services
New Service Message
DVB Signal Display
2/2
Access
Access
Access
Access
Access
On
Access
(p. 24)
NSW / ACT
Auto
Access
Access
(p. 21)
up
CH
down
18
•
Only available items can be selected.
19
How to Use Menu Functions
■ Menu list
■ Menu list
Item
Menu
Adjustments / Configurations (alternatives)
VIERA Link
Speaker Selection
Controls the connected Panasonic equipment
“Easy control only with VIERA remote control” (p. 31)
“Speaker control” (p. 31)
You can also access VIERA Link Menu directly using the VIERA Link button on the
remote control.
Viewing Mode
Basic picture mode (Dynamic / Normal / Cinema / Auto)
Set for each input signal
VIERA Link Control
DVB Favourites Edit
•
•
Colour Balance
Chooses the colour balance of the entire image (Cool / Normal / Warm)
P-NR
Picture Noise Reduction
Automatically reduces unwanted picture noise (Off / Normal / Dynamic / Auto)
Not valid on HDMI, PC signal or DVB
•
•
Automatically reduces noise for watching DTV, DVD and VCD (Off / Min / Mid / Max)
Automatically makes still pictures and slow pictures look more vivid (Off / On)
For PAL or NTSC signal reception only
Not valid on S-Video, components, PC and HDMI
Cannot be used with DVB
••
•
Automatically sets the channels received in the area (p. 24)
Analogue
Programme Edit
Edits analogue channels (p. 25)
DVB Manual
Tuning
Sets the DVB channels manually (p. 25)
Analogue
Manual Tuning
Sets the analogue channels manually (p. 25)
Add New DVB
Services
Adds new DVB services (p. 25)
New Service
Message
Selects whether to give a notification message when a new DVB service is found (p. 25)
DVB Signal
Display
Checks the DVB signal condition (p. 25)
Off Timer
Sets the time the TV automatically turns Off (Off / 15 / 30 / 45 / 60 / 75 / 90 minutes)
Teletext
Teletext display mode (TOP (FASTEXT) / List) (p. 16)
Shipping Condition
Resets all settings, for example, when moving house (p. 26)
Treble
Adjusts the output level of high-pitch, shrill sound
System Update
Downloads new software to TV (p. 23)
Balance
Adjusts volume level of right and left speakers
Input Labels
Labels or skips each input terminals (p. 27)
Headphone Volume
Adjusts the volume of the headphones
Surround
Surround sound settings (Off / On)
Banner Display
Timeout
Sets how long the information banner (p. 11) stays on screen
0 (No display) to 10 sec. in 1-sec. increments
Volume Correction
Adjusts volume of individual channel or input mode
Audio Preference
Selects the initial setting for Audio tracks (Dolby Digital / MPEG)
If programme has both Dolby Digital and MPEG audio tracks, priority is given to what you select
Dolby Digital : A method of coding digital signals developed by Dolby Laboratories. Apart
from stereo (2ch) audio, these signals can also be multi-channel audio.
MPEG :
An audio compression method that compresses audio to small size
without any considerable loss of audio quality.
DVB mode only
•
SPDIF Selection
Selects the initial setting for digital audio output signal from DIGITAL AUDIO OUT
terminal (Auto / PCM)
Auto: Dolby Digital is output as Dolby Digital Bitstream. MPEG is output as PCM.
PCM: Dolby Digital is output as PCM. MPEG is output as PCM.
DVB mode only
MPEG Audio Level
Normally, MPEG sound is larger than Dolby Digital one
You can adjust the audio level of MPEG as the initial setting
0dB to -12dB in -2dB reductions
DVB mode only
Select to fit the input signal (Auto / Digital / Analogue) (p. 29)
Auto
: Automatic detection of digital or analogue sound source
Digital
: HDMI cable connection
Analogue : HDMI-DVI adapter cable connection
HDMI input mode only
HDMI2 terminal is for digital signal only
No setting for HDMI2 available
••
•
Press the OK button to reset the present Sound Mode to the default settings
VIERA Link
Sets to use VIERA Link functions (Off / On) (p. 30)
Power off Link
Set to “Set” to use Power off Link function (No / Set) (p. 31)
Power on Link
Set to “Set” to use Power on Link function (No / Set) (p. 31)
Region Select
•
••
•
Advanced
Adjusts the output level of deep bass
VIERA Link Settings
Bass
Setup
Sound
Basic sound mode (Music / Speech)
Reset Sound Default
Auto Tuning
Press the OK button to reset the present Picture Mode to the default settings
Mode
HDMI1 Input
Creates list of favourite programmes (p. 23)
How to Use Menu Functions
(picture, sound quality, etc.)
Colour Management
Automatically adjusts colours to vivid ones (Off / On)
Not valid on PC signal
Adjustments / Configurations (alternatives)
•
Picture
Adjusts tint of image
For NTSC signal reception only
Reset Picture Default
20
•
Tint
3D-COMB
Tuning Menu
Contrast, Brightness, Adjusts colour, brightness, etc. for each picture mode to suit your taste
Colour, Sharpness
MPEG NR
Item
Menu
Selects the region where you live to adjust the standard time (NSW/ACT / Victoria /
Queensland / South Australia / Western Australia / Nothern Territory / Tasmania)
(p. 23)
Select time offset from the standard time for Summer Time
Daylight Saving Time (Auto / Off / +1/2 Hr / +1 Hr) (p. 23)
•
••
Set to “Auto” normally
Software Licence
Displays the software licence information
System Information
Displays the system information of this TV
A different menu will be displayed while PC or DVI to HDMI adapter cable is used. (p. 28 and p. 29)
Only available items can be selected.
21
DVB Settings (DVB mode)
DVB Settings provide access to various advanced features.
1
Create your favourite service List from various broadcasters (up to 4: FavList1 / FavList2 /
FavList3 / FavList4).
The list is displayed in information banner (p. 11), TV Guide (p. 12) and then easily accessed.
A service is added
Select a service and add it to the list
If in Analogue mode
Select DVB
DVB Favourites Edit
Wed 12/05/04 10:46
POWER
INPUT
GUIDE
EXIT
2
Display the menu
List
favourite
services
MENU
DVB
Favourites
Edit
OK
MENU
RETURN
R
G
Y
ASPECT
B
4
5
6
7
8
9
3
Select the field of Profile to edit and:
•
•
•
VIERA Link
select
Sound
•
•
Setup
0
INFO
MUTE
CH
VOL
TEXT STTL INDEX HOLD
POWER REC
VCR
4
DVD
Setup Menu
TV
Off
TOP
Access
EXIT
5
Update
TV’s
software
system
System
Update
3 seconds
Setup Menu
Region Select
Daylight Saving Time
Software License
System Information
select
To move the channel
G
Select the new position
To delete the channel
Y
•
Confirm
To delete all channels
G
B
Note
Channel numbers cannot be changed, due to broadcast restrictions.
Select “Auto Update Search in Standby” and then set “On” or “Off”
System Update
Auto Update Search in Standby
System Update Search Now
On
Select
“System Update Search Now”
2/2
access
select
Region
Select
Adjust for
Summer Time
Daylight
Saving Time
set
select
•
■ To update immediately
NSW / ACT
Auto
Adjust the
standard time
Set
Select the character
If System Update is performed, the software will be updated (it may change TV
functions). If you do not wish to do so, set “Auto Update Search in Standby” to Off.
access
Access
R
Select the region where you live to
adjust the standard time.
The time contained in the broadcast
signal is UTC (Universal time,
coordinated).
•
Select time offset from the standard
time for Summer Time.
Normally select “Auto”.
If there is a gap between displayed
time and actual time, set this
function.
••
On: Automatically performs
a search in standby and
downloads an update, if any
software updates are available
Searches for an
update (for several
min.) and displays
a corresponding
message if any
Region
NSW / ACT
Victoria
Queensland
South Australia
Western Australia
Northern Territory
Tasmania
Download
•
Standard time
Download may take
for about 20 min.
Advanced
■ To return to TV
1/2
RETURN
To name the Profile
Download new software to TV.
For details (p. 35)
Select “DVB Favourites Edit”, “System Update”,
“Region Select” or “Daylight Saving Time”
DVB Favourites Edit
Tuning Menu
Off Timer
Teletext
Shipping Condition
System Update
Input Labels
Banner Display Timeout
VIERA Link Settings
PROGRAMME
22
■ To edit Profile
access
Picture
To add all channels
Y
to the list
1 TEN Digital
B
Select “Setup”
Main Menu
select
TEN Digital
ABC TV Sydney
SBS DIGITAL 1
FTV guide
7 Digital
NINE DIGITAL
7 HD Digital
7 Guide
DVB Settings (DVB)
3
1
2
3
4
7
9
70
77
•
2
•
Wed 12/05/04 10:46
FavList1
All DVB Services
G
TEN Digital
ABC TV Sydney
SBS DIGITAL 1
FTV guide
7 Digital
NINE DIGITAL
7 HD Digital
7 Guide
To display
another Profile
OPTION
1
DVB Favourites Edit
FavList1
All DVB Services
1
2
3
4
7
9
70
77
Daylight Saving Time: Auto
(During Summer Time)
+10:00
+11:00
+10:00
+9:30
+8:00
+10:30
+9:00
+9:30
+10:00
+11:00
(Based on GMT)
23
Editing and Setting Channels
The current channel settings can be changed according to your needs and reception conditions.
You can re-tune all TV channels when moving house or search for new services which may have
recently started broadcasting.
INPUT
EXIT
ASPECT
1
Select DVB or Analogue
2
Display the menu
•
•
“DVB Manual Tuning”, “Add New DVB Services”, “New Service
Message” and “DVB Signal Display” are available in DVB mode only.
“Analogue Programme Edit” and “Analogue Manual Tuning” are
available in Analogue mode only.
OK
MENU
RETURN
R
G
Y
B
OPTION DIRECT TV REC
Select “Setup”
3
Select the channel to edit
Edit
Analogue
channels
Cursor
Prog.
Chan.
1
CH33
123
Skip
Off
2
CH21
XYZ
Off
3
CH21
FTP
Off
4
CH60
5
CH21
Analogue
Programme
Edit
•
displayed when selecting channels
Analogue Programme Edit
Prog.
Chan.
1
CH33
123
Off
2
CH21
XYZ
Off
3
CH21
FTP
Off
4
CH60
5
Name
Skip
R
Off
CH21
456
Off
(Maximum: five characters)
Select the
“Name” field
Enter the “User
input” mode
Select the
character
Set
RETURN
select
Sound
STTL
All DVB Services
Select FAV List
TEXT
45
Edit
VIERA Link
This function is only effective when
pressing the Programme Up / Down
button on the TV or the remote control.
Analogue Programme Edit
Prog.
Chan.
1
CH33
123
Off
2
CH21
XYZ
Name
Skip
Off
3
CH21
FTP
Off
4
CH60
5
CH21
Off
456
Off
Select the
“Skip” field
Select
“On”
Store
Setup
4
5
7
6
8
Select “Tuning Menu”
4
9
0
Setup Menu
TEXT
F.P.
INDEX HOLD
REC
VCR
access
1/2
DVB Favourites Edit
Access
Tuning Menu
Off Timer
Off
Teletext
TOP
Shipping Condition
System Update
Input Labels
Banner Display Timeout 3 seconds
VIERA Link Settings
CH
Set DVB
channel
manually
TV
6
EXIT
Set Analogue
channel
manually
access
Access
Access
Access
Access
Access
On
Access
Net ID.
TS ID.
Quality
Set Analogue channel manually after Auto Tuning.
If a VCR is connected with only the RF cable, select programme position “0”.
Analogue Manual Tuning
Programme
Manual Tuning
select
1
0
[CH33]
75
Select the channel
Select the programme position
Analogue
Manual Tuning
1
2
3
4
5
6
7
8
9
Set
Any new services found will be added automatically.
Add New DVB Services
Please wait!
Prog.
Add New
DVB Services
Automatically set the DVB and Analogue channels received in the area.
Settings are made automatically
Search and store
search
store
CH
0
Add
DVB channel
automatically
Access “Auto Tuning”
0
0
Service Name
RF Ch
ZDF
ARD
6
start
69
Service Name
Net ID.
TS ID.
Quality
•
The new service is added with the current settings
saved as they are.
Advanced
■ To return to TV
RF Ch
474,00 MHz
10
10
Stopped
Tuning Menu
Auto Tuning
Analogue Programme Edit
DVB Manual Tuning
Analogue Manual Tuning
Add New DVB Services
New Service Message
DVB Signal Display
[CH21]
Physical Channel
Signal Quality
Signal Strength
DVB Manual
Tuning
select
Select a function
5
select channel
adjust frequency
(set where the level of “Signal Quality”
becomes the maximum)
search
DVB Manual Tuning
Prog.
DVD
PROGRAMME
Normally use “Auto Tuning” or “Add New DVB Services” for the DVB channel setting.
If tuning has not done completely, use this function.
Editing and Setting Channels
3
10:30 am
Now Dolby D
Bad Signal
•
2
1 TEN
Corontation Street
9:00 am - 11:00 am
RATING: PG
Off
Picture
1
select
Off
456
■ To delete R After confirming, press R
■ To add G After confirming, press G
Y
Select new position
■ To move Y
■ To change the name of the broadcaster ■ To skip the channel
access
Main Menu
Name
To change channel number
“Analogue Manual Tuning”
Channel
Name
Analogue Programme Edit
■ Delete
■ Add
■ Move
■ Change
name
■ Skip
MENU
•
Edit the analogue programme position settings
This will take about 3 mins.
Auto Tuning - Digital and Analogue
Auto Tuning
Digital Tuning
Analogue Tuning
All tuning data will be erased
Start Auto Tuning
Auto
Tuning
••
•
69
75
RF Ch
Service Name
2
ABC TV Sydney
3
SBS DIGITAL 1
4
FTV guide
7
7 Digital
9
NINE DIGITAL
CH 29
CH 33
BBC1
This will take about 3 mins.
EXIT
RETURN
Set channels
automatically
6
0
Type
DVB
DVB
DVB
DVB
DVB
Analogue
Analogue
-
All previous settings are erased.
When the operation is completed, the digital service at programme position “1” will be displayed.
If no DVB services are found, the first analogue service will be displayed.
If tuning has not done completely “DVB Manual Tuning”, “Analogue Manual Tuning”
For Auto Tuning, using the buttons on the top of the TV
Press repeatedly until “Auto Tuning” appears
Access “Auto Tuning”
24
Quality
10
10
10
10
10
Start “Auto Tuning”
F
F
TV
TV
■ To return to TV
F
TV
AV
Display a
notification
message
Selects whether to give a notification message when a new DVB service is found. (Off / On)
New DVB service found!
Press OK to add new service.
Press EXIT to lgnore.
New Service
Message
Check
DVB signal
DVB Signal
Display
Selects a service and checks the DVB signal condition.
Use for adjusting the direction of the aerial.
To change the service during the menu appears
•
DVB Signal Display
Service name
Signal Quality
Signal Strength
CH
[CH53] 7 7 Digital
Off
0
5
10
Signal Quality:
Green bar Good
Yellow bar Poor
Red bar Bad (Check the aerial)
••
•
25
Restore Settings
Input Labels
Resets the TV to its original condition, i.e. no channels tuned in.
All settings (channels, picture, sound quality, etc.) are reset.
For easier identification and selection of the input mode, you can label each input terminals or skip
terminal that is not connected to any equipment.
(To select the input mode p. 14)
1
Display the menu
MENU
INPUT
ASPECT
1
Display the menu
2
Select “Setup”
MENU
EXIT
INPUT
OK
MENU
2
RETURN
Select “Setup”
ASPECT
Main Menu
VIERA Link
OK
Picture
OPTION DIRECT TV REC
select
Sound
1
2
EXIT
access
MENU
RETURN
VIERA Link
Picture
Setup
3
5
6
7
8
9
Setup
VCR
REC
INDEX HOLD
VCR
DVD
PROGRAMME
4
■ To return to TV
Setup Menu
1/2
DVB Favourites Edit
Tuning Menu
Off Timer
Off
Teletext
TOP
Shipping Condition
Access
System Update
Input Labels
Banner Display Timeout 3 seconds
VIERA Link Settings
access
2
3
4
5
6
7
8
9
VCR
TEXT
F.P.
VCR
DVD
Confirm
set
EXIT
■ To re-tune TV channels only, e.g. after moving house
26
set
select
■ User input
You can name each input terminals freely.
Set characters
Store
User input
select
“Auto Tuning” will automatically start. (p. 9)
1 of 2
DVD
AV2
AV3
AV4
PC
HDMI1
HDMI2
•
Follow the on-screen instructions
“Auto Tuning” (p. 24)
AV1
AV2
AV3
AV4
PC
HDMI1
HDMI2
The labels you set will be displayed in “Input Selection” menu (p. 14) or banner.
If “Skip” is selected, you cannot select the mode.
Select “User input”
•
Input Labels
EXIT
RETURN
Shipping
Condition
Select a input terminal and set
■ To return to TV
Check the message and initialise
Restore
Settings
select
Advanced
4
TV
Shipping Condition
access
1/2
PROGRAMME
EXIT
All tuning data will be erased
Are you sure?
Are you sure?
Setup Menu
DVB Favourites Edit
Tuning Menu
Off Timer
Off
Teletext
TOP
Shipping Condition
System Update
Input Labels
Access
Banner Display Timeout 3 seconds
VIERA Link Settings
INDEX HOLD
REC
Set
3
0
select
Select “Input Labels”
Input Labels
Restore Settings
F.P.
Select “Shipping Condition”
1
••
3
0
TEXT
select
Sound
OPTION DIRECT TV REC
4
access
Main Menu
access
select
1 of 2
RETURN
Name
A B C D E
U V W X Y
a b c d e
u v w x y
F G H I
Z
0 1
f g h i
z ( ) +
J
2
j
-
K
3
k
.
L M N O P Q R S
4 5 6 7 8 9 ! :
l m n o p q r s
* _
T
#
t
set
(maximum: ten characters)
27
Displaying PC Screen on TV
HDMI Functions
The screen of the PC connected to the TV can be displayed on the TV.
You can also listen to PC sound with the audio cable connected. To connect PC (p. 32)
HDMI (high-definition multimedia interface) allows you to enjoy high-definition digital images and highquality sound by connecting the TV and the equipment.
HDMI-compatible equipment (∗1) with an HDMI or DVI output terminal, such as a set top box or a DVD
player, can be connected to the HDMI terminal using an HDMI compliant (fully wired) cable.
About connections, see “External Equipment” (p. 32).
1
INPUT
ASPECT
Select the external input
EXIT
OK
MENU
OPTION DIRECT TV REC
2
3
4
5
6
7
8
9
access
Input Selection
AV1
AV2
AV3
AV4
PC
HDMI1
HDMI2
TV
select
0
Corresponding signals (p. 36)
If “H-freq.” or “V-freq.” is shown in red,
the signals may not be supported.
■ DVI connection
VCR
■ To return to TV
■ PC menu setting (changed as desired)
•
Menu
To make settings
“How to Use Menu Functions”
Item
to
Adjustments / Configurations (options)
Picture
R-Gain
Adjusts the white balance for red areas
G-Gain
Adjusts the white balance for green areas
Advanced
B-Gain
PC
Settings Gamma
■ DVI Position Settings
(p. 18)
(2.0 / 2.2 / 2.5)
H-pos
Switches to a wide view
VGA (640 × 480 pixels), WVGA (852 × 480 pixels),
XGA (1,024 × 768 pixels), WXGA (1,366 × 768 pixels)
Options change depending on signals
•
•
Adjusts vertical position
V-pos
Set to the minimum level if noise occurs
Reset
DVI Position
Settings
Press the OK button to reset to the default settings
Setup
(∗1): The HDMI logo is displayed on HDMI-compliant equipment.
(∗2): Enquire at your local digital equipment retailer shop.
Adjusts vertical position
V-pos
Sync
28
DVI Position
Settings
Advanced
Input
Resolution
Setup
Press the OK button to reset to the default settings
Clock Phase
Reset PC
Settings
Other items
Adjustments
Adjusts horizontal position
H-pos
•
Item
Adjusts the white balance for blue areas
Adjusts horizontal position
PC
Setup
•
Menu
Reset PC
Settings
Clock
If the picture position is not fit to the screen during the DVI connection, adjust the position on “DVI Position
Settings” in Setup Menu. The settings are memorized for each HDMI terminals and input signals.
To make settings
“How to Use Menu Functions”
to
(p. 18)
•
If the external equipment has only a DVI output, connect to the HDMI1 terminal via a DVI to HDMI adapter cable (∗2).
When the DVI to HDMI adapter cable is used, connect the audio cable to the audio input terminal
(HDMI1: use AUDIO IN terminals).
HDMI Functions
Displaying PC Screen on TV
••
•
1
Select “PC”
2
RETURN
••
••
••
••
•
•
•
Note
HDMI is the world’s first complete digital consumer AV interface complying with a non-compression standard.
Audio settings can be made on the “HDMI1 Input” menu screen. (p. 20)
Applicable audio signal sampling frequencies (2ch L.PCM): 48 kHz, 44.1 kHz, 32 kHz
HDMI2 terminal is for digital audio signal only.
Use with a PC is not assumed.
If the connected equipment has an aspect adjustment function, set the aspect ratio to “16:9”.
These HDMI connectors are “type A”.
These HDMI connectors are compatible with HDCP (High-Bandwidth Digital Content Protection) copyright
protection.
An equipment having no digital output terminal may be connected to the input terminal of either “Component”,
“S-VIDEO”, or “Video” to receive analogue signals.
The HDMI input terminal can be used with only the following image signals:
480i, 480p, 576i, 576p, 720p, 1080i and 1080p. Match the output setting of the digital equipment.
For details of the applicable HDMI signals, see p. 36.
Eliminates flicker and distortion
Adjust after Clock adjustment
Set to the minimum level if noise occurs
PC sync signal type (H & V / On G)
H & V : Horizontal and Vertical sync from your PC (Most common sync format)
On G : Sync on Green sync from your PC
•
•
•
Press the OK button to reset to the default settings
p. 20 and p. 21
29
VIERA Link “
ControlTM”∗
You can control some functions of the
connected Panasonic equipment with
this TV remote control (point the remote
control at the TV’s signal receiver).
•
••
••
•
If you cannot access the menu, check the
settings and the equipment (p. 30).
EXIT
OK
MENU
Easy
control
only with
VIERA
remote
control
VIERA Link Control
Speaker Selection
G
Y
B
2
Select “Setup”
OPTION DIRECT TV REC
Select the
equipment you
want to access
•
2
3
4
5
6
FUNCTION MENU
7
8
9
0
VCR
MUTE
VOL
TEXT
F.P.
REC
PROGRAMME
30
INDEX HOLD
VCR
DVD
Easy
playback
•
4
VIERA Link
Power off Link
Power on Link
On
Set
Set
HD Video Camera
Speaker
control
Listen
Recording
Watch
Import/Record
8/8
To Others
About the operations for the equipment, read the manual of the equipment.
■
VIERA Link Control
Speaker Selection
VOL
Recorder
Home Cinema
Mute
select
Set to “Home Cinema”
or “TV”
set
••
MUTE
The sound of TV speakers is mute.
When the equipment is turned off,
TV speakers will be active.
■ TV
TV speakers are active.
Power on
Link
select
Power off
Link
select
Setup
DATE/TIME 2006.12. 1 10:46
VIERA Link Menu
access
set
Player theatre
Start
You can control the theatre speaker with TV’s remote control.
This function is available when Panasonic Amplifier or Player theatre is connected.
If you cannot access the menu, check the
Home Cinema
settings and the equipment (p. 30).
Adjustment for equipment
(automatically turned on if it is in
Display “VIERA Link Menu”
Standby mode).
Select “Speaker Selection”
Volume up / down
Select “VIERA Link Settings”
VIERA Link Settings
Access when the key words
are displayed on colour bar
Automatic Input switching-When the connected Panasonic equipment is operated, input
mode is switched automatically. When it is stopped operating, input mode is not returned.
select
Select “VIERA Link”
and set to “On”
B
ALL
Copy
Setup
DVB Favourites Edit
Tuning Menu
Off Timer
Off
Teletext
TOP
Shipping Condition
System Update
Input Labels
Banner Display Timeout 3 seconds
Access
VIERA Link Settings
Y
Playback
Picture
3
G
Delete
VIERA Link
1/2
The same functions with
the OPTION button of the
equipment
HDD
access
Setup Menu
R
Example:
DVD Recorder DIGA
Exit the menu
OPTION
select
access
•
Main Menu
EXIT
select
Operate the menu of the equipment
MENU
Sound
1
Recorder
Home Cinema
Advanced
R
RETURN
Return to the previous
menu
RETURN
VIERA Link Menu
VIERA Link “HDAVI ControlTM”
ASPECT
Store / Set / Access
Select “VIERA Link Control”
■
1
Move the cursor / access /
adjust
Display “VIERA Link Menu”
••
■•
INPUT
Move the cursor /
select the menu
Access the menu of the equipment
■
Display the menu
Available VIERA remote control buttons:
(depending on the connected equipment)
•
∗Enjoy additional HDMI Inter-Operability with Panasonic products which have “HDAVI Control” function.
This TV supports “HDAVI Control 2” function.
Connections to some Panasonic equipment (DVD Recorder DIGA, HD Video Camera, Player theatre,
Amplifier, etc.) with HDMI cables allow you to interface them automatically.
The equipment with “HDAVI Control” function enables the following operations:
Easy playback (p. 31)
Power on Link (p. 31)
Power off Link (p. 31)
Speaker control (p. 31)
In addition, the equipment with “HDAVI Control 2” function enables the following operation:
Easy control only with VIERA remote control (p. 31)
These features are limited to models incorporating Panasonic’s “HDAVI Control” and “VIERA Link”.
VIERA Link “HDAVI Control”, based on the control functions provided by HDMI which is an industry
standard known as HDMI CEC (Consumer Electronics Control), is a unique function that we have
developed and added. As such, its operation with other manufacturers’ equipment that supports HDMI
CEC cannot be guaranteed.
Refer to individual manuals for compatibility information. About applicable equipment, consult your local
Panasonic dealer.
HDMI cable
This function needs an HDMI compliant (fully wired) cable. Non-HDMI-compliant cables cannot be utilized.
It is recommended that you use Panasonic’s HDMI cable. Recommended part number:
RP-CDHG15 (1.5 m)
RP-CDHG30 (3.0 m)
RP-CDHG50 (5.0 m)
Preparations
Setup the equipment to enable this function. Read the manuals of the equipment.
About connections, see “External Equipment” (p. 32). Read the manuals of the equipment too.
For the first time / When adding new equipment, reconnecting equipment or changing setup
After connection turn the equipment on and then switch the TV on.
Select the input mode to HDMI1 or HDMI2 (p. 14), and make sure that an image is displayed
correctly.
•
•
Set to “Set”
When the connected Panasonic equipment starts playback or direct navigator /
function menu for the equipment are activated, the TV is automatically turned on.
(Only when TV is in Standby mode.)
Set to “Set”
When TV is set to Standby mode, the connected Panasonic equipment is also
automatically set to Standby.
•
This function will work even if the TV enters standby mode automatically by Off Timer
function or auto power standby function.
The TV remains on even if the “VIERA Link” compatible equipment is turned off.
31
External Equipment
To watch satellite broadcasts
Set top box
These diagrams show our recommendations for how to connect the TV to your various equipment.
For other connections, consult the instructions for each piece of equipment, the table below, and the
specifications (p. 39).
1
2
S VIDEO 4 pin terminal
Chrominance in
Luminance in
Chrominance earth
HDMI terminal
AV IN
To listen with speakers
This slot is for services
by the Panasonic dealer.
or
Optical digital
audio cable
AV4 IN
S
VIDEO
AUDIO
IN
VIDEO
L/
MONO
L
R
Luminance earth
Fully wired HDMI
compliant cable
Amplifier with
speaker system
PC
DIGITAL AUDIO OUT
Hot Plug Detect
DDC/CEC Ground
SCL
CEC
TMDS Clock Shield
TMDS Data0−
TMDS Data0+
TMDS Data1 Shield
TMDS Data2−
TMDS Data2+
•
•
19
17
15
13
11
9
7
5
3
1
18 +5V Power
16 SDA
14 Reserved (in cable
but N.C. on device)
12 TMDS Clock−
10 TMDS Clock+
8 TMDS Data0 Shield
6 TMDS Data1−
4 TMDS Data1+
2 TMDS Data2 Shield
Connect the S-VIDEO or VIDEO terminal
when using AV1 / AV4 IN terminals.
Connect the COMPONENT or VIDEO
terminal when using AV2 / AV3 IN
terminals.
PC
AUDIO
AV1 IN
R
AV2 IN
MONITOR
OUT
(Listening)
AV3 IN
COMPONENT
S VIDEO
VIDEO
Y
COMPONENT
MONO
MONO
PB/CB
MONO
Conversion adapter (if necessary)
PB/CB
L
Computer
L
AUDIO
PR/CR
To watch DVDs
PR/CR
R
R
(AUDIO)
(VIDEO)
or
(S-VIDEO)
(Viewing)
AUDIO
(Listening)
To record / playback
DVD player
DVD Recorder / VCR
Headphones
RF cable
■ To adjust volume
or
External Equipment
(M3 stereo
mini plug)
•
(Viewing)
Y
VIDEO
“Headphone
Volume” in the
Sound Menu
(p. 20)
••
■Types of connectable equipment to each connector
Connector
Recording / Playback
(equipment)
AV1 AV2 AV3
IN IN IN
AV4 IN
(Side of TV)
MONITOR DIGITAL
OUT
AUDIO
OUT
32
Panasonic
Amplifier
Use fully wired HDMI compliant cable.
Read the manuals of the equipment too.
Speaker system
or
■ Easy playback, Easy control
only with VIERA remote control
1 2
To record / playback videocassettes / DVDs
(VCR / DVD recorder)
To watch DVDs (DVD player)
To watch camcorder images (Video camera)
To watch satellite broadcasts (Set top box)
To play games (Game equipment)
To use amplifier with speaker system
VIERA Link
: Recommended Connection
■ Home Cinema
Advanced
VIERA Link (p. 30)
Camcorder / Game equipment
HD Video Camera
Panasonic DVD Recorder
Panasonic
Player theatre
Panasonic DVD Recorder,
HD Video Camera, etc.
Speaker system
or
33
Technical Information
Channel Allocation (Analogue mode)
Updating the software system (DVB mode)
CH Display / Receive Channel
CH Display / Receive Channel
CH Display / Receive Channel
CH 0
CH 6
S 11
CH 5
CH 9
S 44
S2
CH 9A
CH 20
CH 10
S 10
■
■To update manually
Rating (DVB mode)
Rating
P
C
G
PG
Meaning
Not classified
Pre school
Children
General
Parental Guidance recommended
Rating
M
MA 15+
AV 15+
R
•
•
CH 75
CH 12
CH 5A
Update system software regularly to ensure that you have latest version software.
If there is an update available, a notification banner is displayed when the channel has the update information.
To download new software, press “OK”
Downloading (approx. 20 min.)
If you choose not to download, press “EXIT”.
To update automatically
Set “Auto Update Search in Standby” to “On” (p. 23)
If there is a new version software being broadcast, the TV will download this automatically.
The automatic updating sequence is carried out at 3:00 AM and 5:00 AM every night under the following conditions.
Standby (TV turned Off with the remote control)
Recording is not in progress.
Meaning
Mature
Mature Adult 15+
Adult strong Violence 15+
Restricted 18+
Perform “System Update Search Now” (p. 23)
If there is an update available, a notification banner is displayed.
To download new software, press “OK”
Downloading (approx. 20 min.)
If you choose not to download, press “EXIT”.
•
•
Note
During downloading, do not turn Off the TV or touch any button.
(The TV is automatically activated after downloading is completed.)
VIERA Link “
Aspect Ratio
The optimum size and aspect can be chosen, and you can enjoy finer images. (p. 11)
TV/AV1/AV2/
AV3/AV4
Component/HDMI
14:9
O
O
Just
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
-
-
-
-
-
O
O
O
O
O
O
-
Zoom2
O
O
Zoom3
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
-
-
-
-
-
The ratio varies depending on the programme, etc. If the ratio is greater than the standard "16:9", black bands
may appear at the top and bottom of the screen.
If the screen size looks unusual when a widescreen-recorded programme is played back on a VCR, adjust the
tracking of the VCR. (See the VCR manual.)
To select the ratio manually: (Only “16:9” or “4:3” in PC mode)
16:9
14:9
Directly displays
the image at “16:9”
without distortion
(anamorphic).
Displays a 4:3 image
full-screen.
Stretching is only
noticeable at the left
and right edges.
STEREO
Mode Indicator
MAIN I
SUB II
I
II
MONO
NICAM .......Used in New Zealand, Singapore, Hong Kong etc.
Type of broadcast
Mode Indicator
Regular broadcast Regular + NICAM MONO I
NICAM DUAL MONO
NICAM STEREO
(Standard Audio)
(MAIN I / SUB II )
(MAIN I )
No Indicator
I
I
II
A2(German) .......Used in Australia, Malaysia etc.
Type of broadcast
Zoom1
Displays a
“4:3” image enlarged
horizontally to fit the
screen.
Displays a
“16:9” letterbox or
“4:3” image without
distortion.
Zoom3
Displays a
“16:9” letterbox
(anamorphic) image
full-screen without
distortion.
Audio Signal
Displays a “2.35:1” letterbox (anamorphic) image
full-screen without distortion. At “16:9”, displays the
image at its maximum (with slight enlargement).
Mode Indicator
•
••
•
Regular broadcast
(Standard Audio)
No Indicator
BILINGUAL or DUAL MONO:
MAIN I / SUB II
I
STEREO
II
Note
If the stereo signal is poor or the receiving conditions are not optimum or if STEREO:MONO automatic switching
occurs, it is recommended you switch from STEREO to MONO.
Even when the contents of the receiving signal undergo changes, selection mode is kept intact.
When the receiving conditions deteriorate, listening will be easier if the mode is set to the MONO position, using
the stereo / bilingual sound selection button.
DUAL, also known as DUAL MONO or as BILINGUAL is not currently transmitted in some countries.
FAQs, etc.
4:3 Full
Zoom2
When you receive the stereo / bilingual sound system, sound output modes can be selected by pressing the
Stereo / Bilingual Sound Selection button.
Just
Displays the image
at the standard
“14:9” without
enlargement.
Displays the image
at the standard “4:3”
without distortion.
Stereo / Bilingual Sound Selection (Analogue mode)
-
Note
4:3
34
-
O
O
O
O
O
O
O
O
O
O
O
O
O
Zoom1
O
O
••
••
•
••
•
Technical Information
•
•
•
16:9
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
HDMI connections to some Panasonic equipment allow you to interface them automatically. (p. 30)
This function may not work normally depending on the equipment condition.
Image or sound may not be available for the first few seconds when the playback starts.
Image or sound may not be available for the first few seconds when Input mode is switched.
Volume function will be displayed when adjusting the volume of the equipment.
If you connect the equipment that has “HDAVI Control 2” function to the TV with HDMI cable, the sound from
DIGITAL AUDIO OUT terminal can be output as multi channel surround.
Easy playback is also available by using the remote control for Amplifier or Player theatre. Read the manuals of the equipment.
If you connect the same kind of equipment at once (for example: one DIGA to HDMI1 / another DIGA to HDMI2),
VIERA Link is available for the terminal with the smaller number.
“HDAVI Control 2” is the newest standard (current as of February, 2007) for Panasonic’s HDAVI Control
compatible equipment. This standard is compatible with Panasonic’s conventional HDAVI equipment.
•
Signal name
PAL
PAL 525/60
DVB-T
M.NTSC
NTSC
480i (60 Hz)
480p (60 Hz)
576i (50 Hz)
576p (50 Hz)
720p (50 Hz)
720p (60 Hz)
1,080i (50 Hz)
1,080i (60 Hz)
1,080p (50 Hz)
1,080p (60 Hz)
PC input
Aspect modes
4:3
4:3 Full
O
O
ControlTM”
35
Technical Information
PC connection
A PC may be connected to this TV so that the PC screen is displayed and sound is heard from the TV.
PC signals that can be inputted: Horizontal scanning frequency 31 to 69 kHz; vertical scanning frequency
59 to 86 Hz (more than 1,024 signal lines could result in incorrect display of the image).
A PC adapter is not necessary for the DOS/V-compliant D-sub 15-pin connector.
•
•
••
••
Note
Some PC models cannot be connected to this TV.
When using PC, set the colour display quality of PC to the highest position.
For details of the applicable PC signals, see below.
Max. display resolution
4:3
16:9
Aspect
•
Before requesting service or assistance, please follow these simple guides to resolve the problem.
If problem still persists, please contact your local Panasonic dealer for assistance.
White spots or shadow
images (noise)
•
1,024 × 768 pixels
1,366 × 768 pixels
Check the position, direction, and
connection of the aerial.
D-sub 15-pin connector signal
5
4
3
2
1
Pin No.
10 9 8 7 6
15 14 13 12 11
Signal Name
Pin No.
R
G
B
NC (not connected)
GND (Ground)
Signal Name
GND (Ground)
GND (Ground)
GND (Ground)
NC (not connected)
GND (Ground)
Pin No.
Signal Name
NC (not connected)
NC (not connected)
HD
VD
NC (not connected)
Input signal that can be displayed
∗ Mark: Applicable input signal
Signal name
••
••
Signals other than above may not be displayed properly.
The above signals are reformatted for optimal viewing on your display.
Applicable input signal for PC is basically compatible to VESA standard timing.
PC signal is magnified or compressed for display, so that it may not be possible to show fine detail
with sufficient clarity.
The LCD panel moves slightly
when it is pushed with a finger
Clattered sound might be heard
•
There are some looseness around the panel to prevent the
damage to the panel.
The panel might move slightly when it is pushed with a finger,
and clattered sound might be heard. This is not a malfunction.
Problem
Chaotic image, noisy
No image can be displayed
Blurry or distorted image
(no sound or low volume)
Unusual image is displayed
No sound is produced
Sound level is low
or sound is distorted
Sound is unusual
Pictures from external equipment
are unusual when the equipment
is connected via HDMI
Actions
••
•
•
•
••
•
••
•
••
••
Set “P-NR” in the Picture Menu (to remove noise). (p. 20)
Check nearby electrical products (car, motorcycle, fluorescent lamp).
Is “Colour” or “Contrast” in the Picture Menu set to the minimum?
(p. 20)
Reset channels. (p. 24)
Turn off the TV with Mains power On / Off switch, then turn it on
again.
Is “Sound mute” active? (p. 7)
Is the volume set to the minimum?
Sound signal reception may be deteriorated.
Set the sound setting of the connected equipment to “2ch L.PCM”.
Check the “HDMI1 Input” setting in the Sound Menu. (p. 20)
If digital sound connection has a problem, select analogue sound
connection. (p. 29)
Is the HDMI cable connected properly? (p. 32)
Turn Off the TV and equipment, then turn them On again.
Check an input signal from the equipment. (p. 36)
Use an equipment compliant with EIA/CEA-861/861B.
FAQs, etc.
Note
This is a characteristic of liquid crystal panels and is
not a problem. The liquid crystal panel is built with very
high precision technology giving you fine picture details.
Occasionally, a few non-active pixels may appear on the
screen as a fixed point of red, green, blue or black.
Please note this does not affect the performance of your LCD.
Frequently Asked Questions
Technical Information
Vertical frequency (Hz)
70.07
59.94
75.00
60.32
75.00
85.06
59.89
60.00
70.07
75.03
85.00
60.02
60.04
66.67
74.55
75.06
Follow the message’s instructions.
If the problem persists, contact the
authorized Service Centre.
HDMI
Horizontal frequency (kHz)
31.47
31.47
37.50
37.88
46.88
53.67
31.44
48.36
56.48
60.02
68.68
63.98
48.39
35.00
49.73
68.68
••
Sound
HDMI
∗
∗
∗
∗
∗
∗
∗
∗
∗
∗
•
Is the TV in “AV mode”?
Is the mains lead plugged into the
socket outlet?
Is the TV turned On?
Check Picture Menu (p. 20) and volume.
Screen
COMPONENT
∗
∗
∗
∗
∗
∗
∗
∗
PC (D-sub 15P)
Signal name
640 × 400 @70 Hz
640 × 480 @60 Hz
640 × 480 @75 Hz
800 × 600 @60 Hz
800 × 600 @75 Hz
800 × 600 @85 Hz
852 × 480 @60 Hz
1,024 × 768 @60 Hz
1,024 × 768 @70 Hz
1,024 × 768 @75 Hz
1,024 × 768 @85 Hz
1,280 × 1,024 @60 Hz
1,366 × 768 @60 Hz
Macintosh13” (640 × 480)
Macintosh16” (832 × 624)
Macintosh21” (1,152 × 870)
••
••
There may be red spots, blue spots,
green spots and black spots on the screen
•
•
480i (60 Hz)
480p (60 Hz)
576i (50 Hz)
576p (50 Hz)
720p (50 Hz)
720p (60 Hz)
1,080i (50 Hz)
1,080i (60 Hz)
1,080p (50 Hz)
1,080p (60 Hz)
Neither image nor
sound is produced
An error message
appears
COMPONENT (Y, PB/CB, PR/CR), HDMI
36
FAQs
37
FAQs
Licence
Problem
•
Actions
Digital TV reception technology requires high quality, robust DTV signals which in some domestic aerial
installations, may be relatively poor despite good analogue reception.
•
To maintain optimum signal quality from TV aerial, use a TV aerial splitter
(as illustrated) when connecting two or more equipments to the same aerial.
TV
(Individual aerial)
Aerial connection when using
DTV and VCR / DVD Recorder
Splitter
VCR
•
•
•
TV goes into “Standby mode”
The remote control does not work
38
•
••
••
Electrical atmospheric interference caused by local or distant
lighting storms or heavy rain with wind in “leafy” locations may
cause pictures to break up and audio to mute or distort momentarily.
Impulse noise interference from an infrequently used electrical appliance,
or a passing vehicle or lawn mower with a “noisy” ignition system.
Like your computer, the TV has to run a number of diagnostic and
software checks before it can display any broadcast channels.
Is the TV in Teletext mode? (p. 16)
Is the channel locked? (p. 25)
Off Timer function is activated.
The TV enters “Standby mode” about 30 min. after broadcasting ends.
Are the batteries installed correctly? (p. 6)
Has the TV been switched On?
Average use
98 W
Standby condition
0.4 W
134 W
16:9
66 cm (diagonal)
80 cm (diagonal)
Visible screen size
575 mm (W) × 323 mm (H)
697 mm (W) × 392 mm (H)
1,049,088 (1,366 (W) × 768 (H))
Number of pixels
120 mm × 60 mm × 2 pcs
Speaker
20 W (10 W + 10 W )
Audio Output
M3 (3.5 mm) stereo mini Jack × 1
Headphones
VGA, SVGA, XGA
SXGA ······ (compressed)
PC signals
Horizontal scanning frequency 31 - 69 kHz
Vertical scanning frequency 59 - 86 Hz
PAL B/G
Reception of Off air broadcasts
DVB-T
7 MHz VHF / UHF (Australia) free-to-air TV broadcast reception
Receiving Systems /
PAL 60 Hz
Playback of NTSC tape from some PAL Video recorders (VCR)
Band name
M.NTSC
Playback from M. NTSC Video recorders (VCR)
NTSC
Playback from NTSC Video recorders (VCR)
Standard Belling & Lee connector
Aerial - Rear
Temperature : 0 °C - 35 °C
Operating Conditions
Humidity
: 20 % - 80 % RH (non-condensing)
RCA PIN Type × 2
0.5 V[rms]
AUDIO L - R
AV1
RCA PIN Type × 1
1.0 V[p-p] (75 Ω)
VIDEO
Input
Mini DIN 4-pin
Y:1.0 V[p-p] (75 Ω) C:0.286 V[p-p] (75 Ω)
S VIDEO
RCA PIN Type × 2
0.5 V[rms]
AUDIO L - R
RCA PIN Type × 1
1.0 V[p-p] (75 Ω)
AV2
VIDEO
Input
Y
1.0 V[p-p] (including synchronization)
COMPONENT
PB/CB, PR/CR
±0.35 V[p-p]
RCA PIN Type × 2
0.5 V[rms]
AUDIO L - R
RCA PIN Type × 1
1.0 V[p-p] (75 Ω)
VIDEO
AV3
Input
Y
1.0 V[p-p] (including synchronization)
COMPONENT
PB/CB, PR/CR
±0.35 V[p-p]
AUDIO L - R
RCA PIN Type × 2
0.5 V[rms]
AV4
VIDEO
RCA PIN Type × 1
1.0 V[p-p] (75 Ω)
Input
S VIDEO
Mini DIN 4-pin
Y:1.0 V[p-p] (75 Ω) C:0.286 V[p-p] (75 Ω)
RCA PIN Type × 2
0.5 V[rms] (high impedance)
Monitor AUDIO L - R
Output VIDEO
RCA PIN Type × 1
1.0 V[p-p] (75 Ω)
HDMI1 / 2 Input TYPE A Connectors
This TV supports “HDAVI Control 2” function.
HIGH-DENSITY
D-SUB
15PIN
R,
G, B/0.7 V[p-p] (75 Ω)
PC Input
HD, VD/TTL Level 2.0 - 5.0 V[p-p] (high impedance)
Others
Audio Input
RCA PIN Type × 2
0.5 V[rms]
DIGITAL AUDIO OUT PCM / Dolby Digital, Fiber optic
657 mm × 525 mm × 239 mm (With TV Stand) 791 mm × 615 mm × 248 mm (With TV Stand)
Dimensions ( W × H × D )
657 mm × 473 mm × 117 mm (TV only)
791 mm × 563 mm × 117 mm (TV only)
14.5 k Net
17.5 k Net
Mass
Aspect Ratio
•
•
Note
FAQs, etc.
Other
The channel cannot be selected
•
Check “Signal Display”. (p. 25)
If “Signal Quality” or “Signal Strength” are displayed in red or
constantly changing, check aerial.
If problem persists consult your local TV aerial installer.
Check that the aerial and antenna cable are designed for DVB.
For your safety, the aerial and cable should be inspected / installed by a
licenced installer that should comply with Australian Standard AS1417.1.
Interference (known as impulse noise) from household appliances
such as light switches, fridges etc may cause picture break up and /
or audio distortion. Use high quality quad shielded coaxial cable fly
lead between TV and antenna wall socket to minimise impulse noise
pickup. If problem persists consult your local TV aerial installer.
When “No Signal” message is displayed check TV aerial connection.
The received signal may be too weak to allow the TV to reliably lock to the
desired “No Signal” channel to generate a stable picture. Repeat the tuning
procedure (p. 24). If problem persists consult your local TV aerial installer.
Power Source
TX-32LXD70A
•
The channel cannot be changed
Check to ensure your area is covered by DVB transmissions.
(www.dba.org.au/)
Check that the aerial and antenna cable are designed for DVB.
For your safety, the aerial and cable should be inspected / installed by a
licenced installer that should comply with Australian Standard AS1417.1.
Note: If you live within 5-10 Km of DVB transmission towers, a
combined VHF / UHF aerial should be adequate. Outside this area,
separate VHF and UHF aerials provide superior reception performance.
If you live in a unit or apartment, check to ensure the Master
Antenna TV (MATV) system is designed for analogue and DVB-T
reception. Please consult your body corporate. (www.dba.org.au/)
TX-26LXD70A
AC 220-240 V, 50 / 60 Hz
Licence
Specifications
Frequently Asked Questions
TV takes so long to turn on
•
•
•
(Individual aerial)
••
Picture very infrequently
breaks up on some or all
channels
Specifications
Connection Terminals
••
Aerial Input
Sound
Picture regularly breaks up on
some channels, or
“No Signal” message
•
Aerial Output
••
••
•
••
Power
Display
Consumption panel
DVB
After DVB Auto Tuning only
some or no DVB channels are
found
•
•
Aerial
Input
terminal
Aerial Output
Trademark Credits
DVB is a trademark of the DVB Digital Video Broadcasting Project (1991 to 1996).
VGA is a trademark of International Business Machines Corporation.
Macintosh is a registered trademark of Apple Computer, USA.
S-VGA is a registered trademark of the Video Electronics Standard Association.
Even if no special notation has been made of company or product trademarks, these trademarks have been fully respected.
HDMI, the HDMI Logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI
Licensing LLC.
HDAVI ControlTM is a trademark of Matsushita Electric Industrial Co., Ltd.
Manufactured under license from Dolby Laboratories.
Dolby and the double-D symbol are trademarks of Dolby Laboratories.
Design and Specifications are subject to change without notice. Weight and Dimensions shown are approximate.
39
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising