Tools - Einhell Chile SA
GB
TOOLS
2013/2014
Our Philosophy
GB
Products. Well done.
We have grouped our over 45 years of experience in developing and
manufacturing high-performance equipment into two basic product
lines.
All the Red products represent our accumulated skills in product design and development. This is where exclusive, ergonomical design
combines with practical functions, premium craftsmanship and good
service for improved performance and better quality to meet the most
demanding customer requirements.
The Blue line represents our entry-level products, which are characterized by their optimized utility at closely calculated prices. All our products provide performance that makes do-it-yourself projects fun as well
as combine high functionality with safety and ease of use.
Performance and quality are well balanced and offered at prices that
put a smile on everyone’s face. Well done.
International
Einhell. Well done.
The Einhell group employs over 1,400 people in more than 50 countries
around the world. With an annual sales volume that exceeds 10 million electric tools and machines, we are one of the most capable trade
partners on a domestic as well as international level.
Our strength in the market allows us to achieve outstanding value with
each of our products, which are tested by experts on site to ensure
quality and safety. In addition, our development work in Germany is
subjected to a thorough testing and inspection program. We demonstrate our high performance standards continuously in the form of practiceproven, sophisticated brand products.
Einhell. Well done.
Jan Teichert
Chief Financial Officer
2
Dr. Markus Thannhuber
Chief Technical Officer
Andreas Kroiss
Chairman of the
Board of Directors
Tools
Handheld electric tools
Screwing
Drilling / Hammer drilling
Mixing
Cutting
Milling / Planing
Grinding
Sawing
Other tools
5
7
9
10
11
12
13
15
Woodworking technology
17
Cleaning technology
20
Compressed air technology
22
Tile and stone cutting
28
Welding technology
30
Metalworking
34
Lifting equipment
38
Firewood cutting
41
Power generation
42
SERVICE
44
Einhell Germany AG recommends kwb-spare parts
www.kwb.eu
Note: For safe handling of the products please refer to the instructions in the operating manual.
3
4
CORDLESS SCREWDRIVER
CORDLESS DRILL
BT-SD 4,8 F
BT-CD 14,4 2B
Nm
NiCd
n0 = 200 min-1
3-5 h
4.8 V / 0.6 Ah
230 V ~ 50 Hz
Softpainted
R/L
CORDLESS TOOLS
Pivot joint | Lamp | Clockwise / counter-clockwise
switch | Charging supply unit | 28 screwdriver bits |
8 socket wrench sockets | Holder for wrench sockets |
Magnetic bit holder
0.4 / 1.2 kg
5
2 x NiCd
14.4 V / 1.3 Ah
n0 = 0 - 550 min-1
21 + 1 Steps
3-5 h
230 V ~ 50 Hz
Softpainted
Electronic
Ø max. 10 mm
R/L
Clockwise / counter-clockwise switch | Quick stop |
Keyless chuck | Speed control electronics | Additional
battery pack
1.4 / 3.2 kg
310 x 160 x 70 mm
5
Bit set: 23 pieces
355 x 265 x 95 mm
Article number
45.107.02
4 006825 545876
BIT SET
Article number
45.133.00
4 006825 538250
Article number
42.580.73
4 006825 573268
CORDLESS DRILL
CORDLESS DRILL
CORDLESS DRILL
CORDLESS IMPACT DRILL
BT-CD 18
BT-CD 18 2B
BT-CD 18 1h
BT-CD 24i
Nm
Nm
Nm
1 x NiCd
18 V / 1.3 Ah
n0 = 0 - 550 min-1
21 + 1 Steps
3-5 h
230 V ~ 50 Hz
2 x NiCd
18 V / 1.3 Ah
Softpainted
Electronic
Ø max. 10 mm
R/L
Softpainted
Clockwise / counter-clockwise switch | Keyless
chuck | Speed control electronics | Quick stop
1.5 / 2.7 kg
5
280 x 285 x 96 mm
Article number
Electronic
3-5 h
230 V ~ 50 Hz
2 x NiCd
18 V / 1.3 Ah
R/L
Softpainted
Ø max. 10 mm
Clockwise / counter-clockwise switch | Keyless
chuck | Speed control electronics | Quick stop | Additional
battery pack
1.5 / 3.1 kg
5
280 x 240 x 87 mm
45.133.30
4 006825 541229
Weight net / gross
n0 = 0 - 550 min-1 21 + 1 Steps
Article number
n0 = 0 - 350 min-1 21 + 1 Steps
n0 = 0 - 1100 min-1
Electronic
1h
230 V ~ 50 Hz
Ø max. 10 mm
Clockwise / counter-clockwise switch | Keyless
chuck | Speed control electronics | Quick stop | 2-speed
gearing | 1h charger | Additional battery pack
1.6 / 4.3 kg
45.133.40
Article number
5
Softpainted
21 + 1 +1
Steps
1h
230 V ~ 50 Hz
Electronic
Ø max. 13 mm
Clockwise / counter-clockwise switch | Keyless
chuck 13 mm | Speed control electronics | 2-speed gearing |
Battery capacity indicator | LED lamp | Impact drill function |
Additional battery pack | 1 hour charger | Additional handle
| 2 bits (50 mm)
2.4 / 6.0 kg
3
370 x 310 x 105 mm
45.133.10
4 006825 538267
Packaging unit
2 x NiCd
n0 = 0 - 350 min-1
24 V / 1.3 Ah n0 = 0 - 1100 min-1
R/L
355 x 265 x 95 mm
4 006825 541236
Packing dimensions
Nm
Article number
45.132.23
4 006825 545913
5
CORDLESS SCREWDRIVER
CORDLESS DRILL
CORDLESS DRILL
BT-SD 3,6/1 Li
BT-CD 10,8/1 Li
BT-CD 14,4 Li
Lithium-Ion Batteries
from Einhell
Small and easy to handle
Powerful even after
prolonged storage,
no self-discharge
Nm
Li-Ion
n0 = 200 min-1
3.6 V / 1.3 Ah
No memory effect
With active cell monitoring
for maximum safety and
battery life
Nm
8 + 1 Steps
3-5 h
230 V ~ 50 Hz
R/L
Softpainted
1 x Li-Ion n0 = 0 - 600 min-1
10.8 V / 1.4 Ah
Softpainted
Clockwise / counter-clockwise switch | Swivel
handle | 9 torque settings | Bit mount with lock | LED lamp |
Battery capacity indicator | Charging supply unit | Soft grip |
4 bits | Holster bag | Blisterpackaging
0.4 / 0.8 kg
8
Electronic
Nm
15 + 1 Steps
12 Nm
3-5 h
230 V ~ 50 Hz
Ø max. 10 mm
R/L
Clockwise / counter-clockwise switch | Quick stop |
Spindle-lock | Single sleeve quick-change drill chuck | Speed
control electronics | LED lamp | Battery capacity indicator |
Soft grip | Magnetic screw holder
1.2 / 1.5 kg
210 x 260 x 65 mm
1 x Li-Ion n0 = 0 - 600 min-1 15 + 1 Steps
3-5 h
15 Nm
14.4 V / 1.4 Ah
230 V ~ 50 Hz
Softpainted
45.133.85
4 006825 559057
Ø max. 10 mm
R/L
Clockwise / counter-clockwise switch | Quick stop |
Spindle-lock | Single sleeve quick-change drill chuck | Speed
control electronics | LED lamp | Battery capacity indicator |
Soft grip | Magnetic screw holder
5
1.3 / 1.6 kg
235 x 230 x 66 mm
Article number
Electronic
5
235 x 230 x 66 mm
Article number
45.133.25
Article number
4 006825 560886
45.133.05
4 006825 560893
CORDLESS DRILL
CORDLESS DRILL
CORDLESS DRILL
DRYWALL SCREW GUN
BT-CD 10,8/3 Li
BT-CD 14,4/3 Li
BT-CD 18/1 Li
BT-DY 720 E
DE: price/performance
”Good – Very Good”
START / STOP
AUTOMATIC
Nm
Nm
2 x Li-Ion n0 = 0 - 350 min-1 19 + 1 Steps
3-5 h
14 Nm
10.8 V / 1.3 Ah n0 = 0 - 1200 min-1
230 V ~ 50 Hz
Softpainted
Electronic
Ø max. 10 mm
R/L
2-speed gearing | Clockwise / counter-clockwise
switch | Quick stop | Spindle-lock | Single sleeve quickchange drill chuck (Jacobs) | Speed control electronics | Additional battery pack | Battery capacity display | Soft grip
1.2 / 2.0 kg
6
245 x 245 x 67 mm
Article number
4 006825 564037
6
Weight net / gross
3-5 h
230 V ~ 50 Hz
Electronic
R/L
Ø max. 10 mm
2-speed gearing | Clockwise / counter-clockwise
switch | Quick stop | Spindle-lock | Single sleeve quickchange drill chuck (Jacobs) | Speed control electronics | LED
lamp | Battery capacity indicator | Soft grip | Magnetic bit
holder
1.6 / 2.9 kg
5
330 x 300 x 120 mm
45.133.77
Article number
1 x Li-Ion n0 = 0 - 350 min-1 19 + 1 Steps
3-5 h
30 Nm
18 V / 1.3 Ah n0 = 0 - 1200 min-1
230 V ~ 50 Hz
Softpainted
Electronic
Ø max. 10 mm
R/L
2-speed gearing | Clockwise / counter-clockwise
switch | Quick stop | Spindle-lock | Single sleeve quickchange drill chuck (Jacobs) | Speed control electronics | LED
lamp | Battery capacity indicator | Soft grip | Magnetic bit
holder
1.7 / 3.0 kg
5
330 x 120 x 300 mm
45.131.75
4 006825 568639
Packing dimensions
STOP
AUTO
START
3
AUTO
STOP
Nm
1 x Li-Ion
n0 = 0 - 350 min-1 19 + 1 Steps
26 Nm
14.4 V / 1.3 Ah n0 = 0 - 1200 min-1
Softpainted
1
2
Article number
720 W
6.35 mm
1/4 "
Softpainted
n0 = 0 - 2200 min-1 max. 12 mm
Electronic
Electronic speed control with speed selector | Clockwise / counter-clockwise switch | Metal gear housing | Tool
chuck for 1/4" (6.35 mm) Internal hexagon | Adjustable
depth stop | Auto-start-stop-drive
2.0 / 2.2 kg
10
330 x 220 x 75 mm
45.133.35
4 006825 568646
Packaging unit
230 V ~ 50 Hz
Article number
42.599.00
4 006825 537710
TOOL KIT
BT-TK 10,8 Li
2x
Nm
3-5 h
2 x Li-Ion
230 V ~ 50 Hz 10.8 V / 1.3 Ah
n0 = 10000 min-1
80 x 80 x
80 mm
n0 = 20000 min-1
2.7 °
Cordless multitool with plunge cut saw blade for
wood | Grinding / sanding attachment and scraper | Supplied with 2 rechargeable batteries
1.7 / 2.8 kg
11 + 1 Steps
R/L
Ø 10 mm
16 Nm
11 + 1 Steps
16 Nm
n0 = 0 - 500 min-1
Cordless drill with soft grip | LED light | Torque
adjustment | Level for horizontal working
5
340 x 290 x 85 mm
Article number
44.192.07
4 006825 580563
IMPACT DRILL
IMPACT DRILL
BIT SET
BT-ID 550 E
BT-ID 710 E
Bit set: 23 pieces
Article number
DRILLING / HAMMER DRILLING
230 V ~ 50 Hz
10 mm
550 W
13 mm
n0 = 0 - 2700 min-1 n0 = 0 - 43200 min-1
25 mm
Ø max. 13 mm
Soft grip | Clockwise / counter-clockwise switch |
Keyless chuck | Metal depth stop | Additional handle |
Speed control electronics with speed preselection
1.8 / 2.1 kg
10
290 x 235 x 73 mm
230 V ~ 50 Hz
10 mm
710 W
13 mm
n0 = 0 - 2700 min-1 n0 = 0 - 43200 min-1
25 mm
Ø max. 13 mm
42.580.73
4 006825 573268
DRILL AND BIT SET
Soft grip | Clockwise / counter-clockwise switch |
Keyless chuck | Metal depth stop | Additional handle |
Speed control electronics with speed preselection
2.1 / 2.3 kg
10
70 pieces: 25 drills: wood, metal, stone | 36 bits |
7 socket bits | Measuring tape | 1 bit adapter
307 x 241 x 77 mm
1
Article number
42.597.80
4 006825 538274
Article number
42.597.90
4 006825 538281
Article number
42.580.85
4 006825 563610
7
IMPACT DRILL
IMPACT DRILL
ROTARY HAMMER
ROTARY HAMMER
BT-ID 720 KIT
BT-ID 1000 E
BT-RH 600
BT-RH 900/1
HIGH QUALITY
COMPONENTS
DE: price/performance
”Good - Very Good“
POWER
Incl. bit / drill
set
230 V - 240 V
~ 50 Hz
720 W
10 mm
13 mm
n0 = 0 - 2700 min-1 n0 = 0 - 43200 min-1
25 mm
Ø max. 13 mm
Quick chuck with lock-function | Drilling / hammer
drilling | Right / left turn | Speed control electronics with
speed preselection | Additional handle | Metal depth gauge |
Incl. 65 pieces bit and drill bit set | Soft grip
2.2 / 3.8 kg
4
230 V ~ 50 Hz
1010 W
10 mm
13 mm
n0 = 0 - 3000 min-1 n0 = 0 - 48000 min-1
25 mm
Ø max. 13 mm
Soft grip | Clockwise / counter-clockwise switch |
Key chuck | Metal depth stop | Additional handle | Speed
control electronics with speed preselection
2.3 / 2.5 kg
310 x 260 x 138 mm
6
305 x 235 x 77 mm
Article number
42.597.65
4 006825 577822
Article number
650 W
22 mm
Softpainted
n0 = 0 - 1100 min-1 n0 = 0 - 5100 min-1
1.8 J
Electronic
R/L
SDS-Plus mounting | Hammer stop | Speed control
electronics with speed preselection | Additional handle |
Metal depth stop | Clockwise / counter-clockwise switch
2.9 / 4.6 kg
3
425 x 275 x 100 mm
42.598.00
4 006825 538298
ROTARY HAMMER
230 V ~ 50 Hz
SDS-PLUS DRILL SET
900 W
n0 = 850 min-1
n0 = 4100 min-1
3J
26 mm
Ø 55 mm
Stop
Stop
SDS-Plus adapter | Additional handle | Hammer
stop facility | Rotation stop facility with chisel fixation |
Metal depth gauge | Sturdy+aluminium gear head | Overload
safety clutch
4.3 / 6.0 kg
3
402 x 305 x 127 mm
Article number
42.582.40
4 006825 538311
Article number
42.582.35
4 006825 577006
DEMOLITION HAMMER
BT-RH 1600
220-240 V ~
50 Hz
FLAT CHISEL HEXAGON FOR
BT-DH 1600
BT-DH 1600
HIGH QUALITY
COMPONENTS
POWER
For all rotary hammers
5 pieces drills: 1 x Ø 5 / 2 x Ø 6 / 2 x Ø 8 mm
Hexagon 30 mm | Width 34 mm | Length 410 mm
1
1
Article number
230 - 240 V
~ 50 Hz
1600 W
32 mm
Ø 68 mm
n0 = 800 min-1
n0 = 3900 min-1
4J
Stop
Stop
42.580.95
230 V~ 50 Hz
n0 = 1500 min-1
43 J
Adapter
Hex 30 mm
SDS-PLUS DRILL BIT AND
CHISEL SET
14.7 / 21.7 kg
For all rotary hammers | 12 pieces, in aluminium
case: 10 drill bits (Ø 5 - Ø 16 mm), 2 chisels
42.584.75
4 006825 577044
8
Weight net / gross
4 006825 565720
POINTED CHISEL HEXAGON FOR
BT-DH 1600
1
Hexagon 30 mm | Length 410 mm
690 x 350 x 170 mm
1
Article number
41.390.72
Hexagon chuck, 30 mm | Additional handle | Incl.
pointed chisel, flat chisel | For heavy demolition works
2
440 x 365 x 130 mm
1600 W
4 006825 569612
SDS-Plus adapter | Vibration absorbing handle |
Rotation stop facility with shiftable chisel fixation | Hammer
stop facility | Metal depth gauge | Additional handle with
locking device | Overload safety clutch
5.6 / 7.8 kg
Article number
1
Article number
42.580.90
4 006825 538885
Packing dimensions
Article number
41.390.67
4 006825 567731
Packaging unit
Article number
41.390.73
4 006825 565737
DRILL SHARPENER
PAINT AND MORTAR MIXER
BT-SH 3/10
BT-MX 1100 E
230 - 240 V
~ 50 Hz
n0 = 1500 min-1 Angle of tip
55 W
118°
S3 50 % 2 min-1
Ø 3 - 10 mm
For twist drills with a diameter of Ø 3 - 10 mm |
Compact construction | Vibration damping feet | Transport
handle
2.1 kg / 2.3 kg
1050 W
n0 = 0 - 550 min-1
Ø 58 mm
L = 530 mm
13 mm
Ø max. 13 mm
R/L
Softpainted
1
3.3 / 3.7 kg
5
Hexagon connection, length 550 mm | 3 pieces
(paint Ø 60 mm, bitumen Ø 80 mm, mortar Ø 100 mm)
MIXING
315 x 255 x 100 mm
42.598.90
1
Article number
4 006825 580167
42.584.67
4 006825 543193
PAINT AND MORTAR MIXER
MIXER SET HEXAGON
Soft grip | Speed control electronics with speed
selection | Clockwise / counter-clockwise switch | Key
chuck | Incl. spiral mixing tool | Additional handles | Can
also be used as power drill
200 x 180 x 125 mm
Article number
230 V ~ 50 Hz
Article number
42.583.60
4 006825 425147
MORTAR STIRRER HEXAGON
BEATER HEXAGON
PAINT MIXER HEXAGON
Mortar Stirrer | Length 550 mm | Ø 100 mm |
Hexagon connection 10 mm | For: Plaster, mortar
Beater | Length 550 mm | Ø 80 mm | Hexagon
connection 8 mm | For: Bitumen, epoxide, adhesive
Paint Mixer | Length 550 mm | Ø 60 mm | Hexagon
connection 6 mm | For: Paint
BT-MX 1400 E
1
Article number
230 V ~ 50 Hz
M 14
1400 W
n0 = 180 - 460 min-1
n0 = 300 - 700 min-1
Ø 140 mm
L = 600 mm
Softpainted
Electronic
1
42.583.63
4 006825 578744
Article number
1
42.583.62
4 006825 578737
Article number
42.583.61
4 006825 578720
MORTAR STIRRER M 14
BEATER M 14
MIXER SET M 14
Mortar Stirrer | Length 585 mm | Ø 135 mm | M 14
For: Plaster, mortar
Beater | Length 585 mm | Ø 120 mm | M 14
For: Bitumen, epoxy, adhesive
M 14 connection | Length 585 mm | 2 pieces
(mortar Ø 135 mm, bitumen Ø 120 mm)
Speed control electronics | Ergonomically-shaped
handle | Soft grip inserts | 2-speed gearbox | Metal gear
housing | Incl. spiral mixing tool | Soft start
4.7 / 6.2 kg
2
325 x 325 x 245 mm
1
Article number
42.584.55
4 006825 556520
Article number
1
42.583.66
4 006825 578676
Article number
1
42.583.67
4 006825 578690
Article number
42.583.65
4 006825 572223
9
ANGLE GRINDER
ANGLE GRINDER
ANGLE GRINDER
BT-AG 500
BT-AG 850
BT-AG 1000
230 V ~ 50 Hz
500 W
n0 = 11000 min-1
M 14
Spindle lock
Softpainted
Ø 115 mm
Spindle lock | Metal gear head | Disc guard |
Additional handle | Flange nut wrench | Cutting disc not
included
1.6 / 1.8 kg
10
CUTTING
295 x 125 x 110 mm
Article number
44.305.80
DIAMOND DISC SET FOR
ANGLE GRINDER Ø 115 mm
BT-AG 2350
850 W
n0 = 11000 min-1
M 14
Spindle lock
Softpainted
Spindle lock | Metal gear head | Disc guard |
Additional handle | Flange nut wrench | Cutting disc not
included
2.2 / 2.5 kg
Article number
n0 = 6000 min-1
Spindle lock
M 14
4 006825 511505
Soft start | Spindle lock | Metal gear head | Toolless
disc guard adjustment | Swivel handle | Additional handle |
Flange nut wrench | Cutting disc not included
DIAMOND DISC SETFÜR
DIA-SCHEIBEN-SET
FORBT-AG 500
SET
OF VELCRO
GRINDING
/ SANDING
ANGLE
GRINDER
Ø 125 mm
PAPERS FOR BT-MG 180/1
Spindle lock
Softpainted
Toolless disc guard adjustment | Spindle lock |
Metal gear head | Flange nut wrench | Additional handle |
Cutting disc not included
2.4 / 2.7 kg
6
Article number
44.306.10
4 006825 538229
CUTTING STAND TS 125/115 FOR
BT-AG 500 / 800 / 1000
44.403.37
Article number
44.310.40
4 006825 506457
CUTTING STAND TS 230 FOR
BT-AG 2000 / 2350
PAPERS FOR BT-MG 180/1
2
230 mm | 2 pieces
44.306.30
4 006825 538243
Weight net / gross
M 14
Ø 125 mm
For angle grinder with
disc diameter 115 and 125 mm
4 006825 511499
For angle grinder
with disc diameter 230 mm
1
10
n0 = 11000 min-1
1
Article number
DIAMOND DISC SETFÜR
DIA-SCHEIBEN-SET
FORBT-AG 500
SET
OF VELCRO
GRINDING
/ SANDING
ANGLE
GRINDER
Ø 230 mm
560 x 180 x 125 mm
Article number
1010 W
Ø 230 mm
Softpainted
5.6 / 6.2 kg
44.305.90
1
44.403.38
230 V ~ 50 Hz
410 x 120 x 90 mm
125 mm | 3 pieces
1
Article number
2350 W
10
4 006825 538212
115 mm | 3 pieces
230 V ~ 50 Hz
Ø 125 mm
295 x 140 x 115 mm
4 006825 538205
ANGLE GRINDER
230 V ~ 50 Hz
1
Article number
44.403.33
Article number
4 006825 442540
Packing dimensions
44.310.50
4 006825 509366
Packaging unit
BISCUIT JOINER
ROUTER
BT-BJ 900
BT-RO 1100 E Kit
230 V ~ 50 Hz
860 W
n0 = 11000 min-1 Ø 100 x Ø 22
x 3.8 mm
230 - 240 V ~
50 Hz
1100 W
n0 = 11000 30000 min-1
max. 18 mm
0°- 90°
HM / TCT, t=6
Ø 8 mm
Ø 6 mm
Electronic
Softpainted
5 - 35 mm
MILLING / PLANING
Infinitely height and angle adjustment | 3-step quick
adjustment of cutting depth | Locking knob for changing cutters | Dust bag | Face spanner for changing cutters
3.3 / 4.6 kg
2
430 x 170 x 230 mm
max. 55 mm
Continously adjustable cutter depth with vernier
adjustment | Dust extractor adapter | Speed control electronics | Spindle lock | Multilevel revolver stop | Clamp 6
and 8 mm | Parallel guide, compass point, copy sleeve |
Cutter set (12 pcs.) in wooden case
3.7 / 4.6 kg
4
290 x 260 x 160 mm
Article number
43.506.11
4 006825 538458
Article number
43.504.71
4 006825 584554
MASONRY CHANNEL CUTTER
ELECTRIC PLANER
ELECTRIC PLANER
BT-MA 1300
BT-PL 750
BT-PL 900
230 V ~ 50 Hz
1320 W
8 - 30 mm
8 - 26 mm
n0 = 9000 min-1
Ø 125 mm
230 V ~ 50 Hz
750 W
n0 = 16500 min-1
Softpainted
0 - 6 mm
82 mm
Softpainted
Infinitely variable cutting depth | Groove widths via
spacer rings | Integrated dust extraction | Soft start | Overload
cut-out | Spindle lock | Additional handle
4.9 / 5.5 kg
3
405 x 295 x 240 mm
Article number
0 - 2 mm
Chip ejection direction switch | Carbide planing
blade | Large blade shaft for perfect results | Aluminium
planing plate at front | Rebate depth stop | Parallel guide |
Dust bag
2.8 / 3.2 kg
6
300 x 160 x 180 mm
43.507.20
4 006825 542318
Article number
230 V ~ 50 Hz
900 W
n0 = 16500 min-1
0 - 15 mm
82 mm
Softpainted
0 - 3 mm
Chip ejection direction switch | Carbide planing
blade | Large blade shaft for perfect results | Aluminium
planing plate at front | Rebate depth stop | Parallel guide |
Dust bag
3.0 / 3.5 kg
6
320 x 180 x 170 mm
43.452.61
4 006825 543216
Article number
43.452.80
4 006825 538472
11
DIAMOND DISC SET MASONRY
CHANNEL CUTTER FOR BT-MA 1300
Ø 100 x Ø 22 x 3.8 mm | 6 teeth | Equipped with
carbide-tipped cutters
1
GRINDING AND ENGRAVING TOOL SET
BT-MG 135/1
125 mm | Segmented | 2 pieces
1
Article number
43.506.90
Article number
44.402.90
230 V ~ 50 Hz
4 006825 431568
135 W
4 006825 513639
SCHLEIFPAPIER-SET
BLADE SET FOR FÜR BT-MG 180/1
SET
OF VELCRO
GRINDING / SANDING
ELECTRIC
PLANER
PAPERS FOR BT-MG 180/1
CUTTER SET FOR ROUTERS
10000 32000 min-1
0.7 / 2.2 kg
12 pieces | Including 6 cutters with guide ring |
Shaft diameter 8 mm
1
43.501.99
1
Article number
43.501.99
4 006825 431391
Article number
43.102.35
6
345 x 225 x 125 mm
Article number
4 006825 574968
44.191.65
4 006825 579987
MULTIFUNCTION TOOL
DELTA SANDER
ORBITAL SANDER
ORBITAL SANDER
BT-MG 220 E
BT-DS 180
BT-OS 150
BT-OS 280 E
230 V ~ 50 Hz
150 W
230 V ~ 50 Hz
230 x 93 mm
187 x 90 mm
230 V ~ 50 Hz
220 W
15000 22000 min-1
3°
230 V ~ 50 Hz
90 x 90 x
90 mm
2m
Wood 32 mm
50 mm
90 x 90 x
90 mm
Saw blade (32 mm wide) | Spade | Sanding plate
with Velcro fastening | Sanding paper | Dust extraction
adapter | Hex key | Soft grip | Speed control electronics |
Aluminium gear head
1.8 / 2.0 kg
6
335 x 93 x 110 mm
Article number
Weight net / gross
180 W
n0 = 10000 min-1 n0 = 20000 min-1
Softpainted
Velcro fastening for quick abrasive paper change |
Connection for dust extractor | Abrasive paper | Dust extractor adapter
1.1 / 1.4 kg
10
315 x 100 x 105 mm
44.650.50
4 006825 579970
12
Reversible blade set (double sided) | 2 pieces |
Width 82mm
Article number
Packing dimensions
n0 = 11500 min-1 n0 = 23000 min-1
Ø 2.0 mm
Abrasive disc with clamp | Additional handle |
Abrasive paper | Dust extractor adapter
1.3 / 1.5 kg
44.642.30
Article number
4
n0 = 0 - 12000 n0 = 0 - 24000
min-1
min-1
Abrasive disc with clamp and velcro fastening |
Additional handle | Speed control | Abrasive paper | Dust
bag | Aluminium grinding plate
2.0 / 2.3 kg
4
345 x 175 x 125 mm
44.605.44
4 006825 543346
Packaging unit
280 W
280 x 115 mm 230 x 115 mm 227 x 115 mm
(Velcro)
270 x 160 x 100 mm
4 006825 554939
Ø 0.5 / 1.6 /
2.4 / 3.2 mm
Speed control electronics | Spindle lock | Flexible
shaft | Telescopic stand rod | Transport and storage case |
189 pcs. accessory set
GRINDING
mber
SPARE CUTTER FOR
BISCUIT JOINER BT-BJ 900
Article number
44.605.32
4 006825 543353
ECCENTRIC SANDER
BELT SANDER
BT-RS 420 E
BT-BS 850/1 E
SET OF SANDING BELTS FOR
BT-BS 850/1 E
75 x 533 mm
8 pieces: 2 x P 40, P 60, P 80, P 120
1
Artikelnummer / Article number
230 V ~ 50 Hz
420 W
Ø 125 mm
n0 = 6000 13000 min-1
n0 = 12000 26000 min-1
230 V ~ 50 Hz
Electronic
Softpainted
76 x 142 mm
Velcro fastening for quick abrasive paper change |
Speed control | Abrasive paper | Dust bag
2.0 / 2.2 kg
10
305 x 188 x 123 mm
850 W
44.198.60
0 - 380 m/min
Article number
44.198.60
76 x 533 mm
4 006825 550207
Electronic
STARTER KIT FOR
BT-MG 180/1 / BT-MG 220 E
Softpainted
Additional ceramic guard in case of wrongly set
belt position | Simple, fast belt change | Additional handle
for perfect work with the belt sander | dust bag | Speed
control | Sanding belt
3.4 / 3.7 kg
6
For wood and plastic, in parts for alu
370 x 173 x 155 mm
1
Article number
44.621.60
4 006825 538489
Article number
44.662.16
4 006825 564273
44.650.10
4 006825 553178
JIGSAW
PENDULUM JIGSAW
PENDULUM JIGSAW
BT-JS 400 E
BT-JS 650 E
BT-JS 800 E
230 V ~ 50 Hz
55 mm
400 W
PE/PP
10 mm
45° - 0° - 45° 800 - 3000 min-1
18 mm
1.1 / 2.3 kg
10
240 x 78 x 208 mm
Article number
650 W
80 mm
6 mm
Speed control electronics with speed selection |
Soleplate can be angled up to 45° | Dust extraction via
adapter | Allen key | Saw blade
SAWING
Article number
45° - 0° - 45° 800 - 3000 min-1
18 mm
PE/PP
20 mm
3210
10 mm
80 mm
Speed control electronics with speed preselection
| Soleplate can be angled up to 45° | Dust extraction via
adapter | Adjustable pendulum stroke (4 settings) | Parallel
guide | Allen key | Saw blade
2.1 / 2.4 kg
10
250 x 233 x 78 mm
43.211.00
4 006825 538533
Article number
800 W
45° - 0° - 45° 0 - 3000 min-1
20 mm
PE/PP
25 mm
3210
10 mm
Speed control electronics with speed selection |
Aluminium soleplate, can be angled up to 45° | Dust
extraction via adapter | Adjustable pendulum stroke
(4 settings) | LED lamp | Toolless blade change | Parallel
guide | Saw blade | Softgrip
2.3 / 2.6 kg
10
258 x 225 x 85 mm
43.211.10
4 006825 538540
Article number
43.211.20
4 006825 538557
13
MINI HAND-HELD CIRCULAR SAW
MINI HAND-HELD CIRCULAR SAW
HAND-HELD CIRCULAR SAW
HAND-HELD CIRCULAR SAW
BT-CS 860 L
BT-CS 860 KIT
BT-CS 1200/1
BT-CS 1400/1
230 V ~ 50 Hz
230 V ~ 50 Hz
1400 W
Ø 190 x Ø 30
x 2.5 mm
HW / TCT
t = 24
1x
230 V ~ 50 Hz
450 W
Ø 85 x Ø 10
x 1.6 mm
1 x HW 20 t
1 x HSS 80 t
1x
n0 = 6000 min-1 max. 23 mm
2x
230 - 240 V
~ 50 Hz
450 W
2x
2x
n0 = 6000 min-1 max. 23 mm
1200 W
n0 = 5000 min-1 55 mm / 90°
37 mm / 45°
n0 = 4800 min-1 66 mm / 90°
45 mm / 45°
Electronic
Softpainted
Incl. 2 sawblades and parallel guide | Infinitely
adjustable cutting depth | Integrated dust extractor with
adapter | Incl. laser | Tool to change the saw blade |
Transport and storage case | Soft grip | Electronic overload
protection
2.02.0/ /3.54.0kgkg
More information about
this article3
t = 80
DIA
t = 20
Ø 85 x Ø 10 mm Ø 85 x Ø 10 mm Ø 85 x Ø 10 mm
Infinitely adjustable cutting depth | Integrated dust
extractor | Electronic overload protection | Incl. laser | Tool
to change the saw blade | Paralell guide | Incl. 6 sawblades,
transport and storage case and carrying bag
More information about
this article
2.0 / 4.0 kg
4 385 x 280 x 170 mm
3
370 x 133 x 265 mm
385 x 280 x 170 mm
ArticleNumber
number
Article
43.309.55
Scan in43.309.80
the QR code
4 006825 572377
SAW BLADE SET FOR
BT-CS 860 L / BT-CS 860 KIT
Softpainted
Ø 160 x Ø 16
x 2.5 mm
HW / TCT
t = 24
Toolless cutting depth adjustment | Toolless saw
table adjustment | TCT saw blade | Splitting wedge | Parallel
guide | Tool to change the saw blade
3.7 / 4.5 kg
43.309.80
Scan in the QR code
4 006825 578997
Article number
CARBIDE-TIPPED SAW BLADE FOR
BT-CS 1200/1
1
Ø 160 x Ø 16 x 2.5 mm | 24 teeth
1
45.021.28
4 006825 575347
Article number
45.020.66
4 006825 577150
CARBIDE-TIPPED SAW BLADE FOR
BT-CS 1400/1
Ø 190 x Ø 30 x 2.5 mm | 24 teeth
1
Article number
45.021.43
4 006825 548129
14
Weight net / gross
Packing dimensions
Packaging unit
Softpainted
Toolless cutting depth adjustment | Toolless saw
table adjustment | TCT saw blade | Splitting wedge | Parallel
guide | Soft start | Tool to change the saw blade
4.3 / 5.2 kg
4
355 x 270 x 255 mm
43.309.32
4 006825 577112
every 2 x
Article number
4
348 x 257 x 248 mm
Artikelnummer
6 pieces (2 x 20 teeth TCT, 2 x 80 teeth HSS,
2 x diamond cutting wheel for tiles) | Ø 85 x Ø 10 mm
Softpainted
Article number
43.309.46
4 006825 577105
HOT AIR GUN
HOT GLUE GUN
BT-HA 2000/1
BT-GG 200 P
230 V ~ 50 Hz I = 1000 W
II = 2000 W
I = 350 °C
II = 550 °C
I = 300 l/min
II = 500 l/min
Softpainted
12 W
(max. 72 W)
ca. 5 min
Ø 11 mm
GLUE CARTRIDGES FOR
ALL HOT GLUE GUNS
ca. 150° C
Safe and solid standing for stationary use | 2 heat
settings | Offset nozzles for flexibility | Heat nozzle | Wide
nozzle | Reducer nozzle | Reflector nozzle | Paint scraper
OTHER TOOLS
230 V ~ 50 Hz
0.7 / 1.6 kg
10
296 x 85 x 272 mm
Support bar | 3 hot glue cartridges Ø 11 x 100 mm
0.2 / 0.3 kg
10
Ø 11 x 200 mm | 24 pieces
170 x 159 x 32 mm
1
Article number
45.201.67
4 006825 543230
Article number
45.221.60
4 006825 539509
SOLDERING GUN
ELECTRIC STAPLER
BT-SG 100
BT-EN 30 E
b
a
b
100 W
max. 500° C
ca. 12 sec.
Integrated soldering position light | Easy to replace
soldering tip | 2 soldering tips | Cutting tip | Solder wire |
Solder grease
0.6 / 1.0 kg
10
265 x 220 x 60 mm
Article number
230 V ~ 50 Hz
30 / min
a: 6 mm
b: 15 - 25 mm
1.1 - 1.25 mm
Electronic
Softpainted
a: 15 - 32 mm
b: 2 mm
STAPLE / NAIL SET FOR
BT-EN 30 E
Electronic stapling force control | Magazine filling
level indicator | Safety lug | ON/OFF switch | 300 staples
25 x 6 mm | 200 staples 15 x 6 mm | 300 nails 32 mm |
200 nails 25 mm
1.7 / 2.0 kg
10
Staples: 300 pcs. of each size: 25 x 6, 20 x
6, 15 x 6 mm | Nails: 600 pcs. of each length: 32 mm,
20 mm, 500 pcs. 25 mm, 400 pcs. 15 mm
240 x 210 x 65 mm
46.100.30
4 006825 538441
45.221.99
4 006825 455021
a
230 V ~ 50 Hz
Article number
Article number
42.578.43
4 006825 543254
Article number
41.378.80
4 006825 533699
15
16
MITRE SAW
MITRE SAW
SLIDING MITRE SAW
BT-MS 2112
BT-MS 250 L
BT-SM 2131 DUAL
230 V ~ 50 Hz
1600 W
S6 40 %
Ø 210 x
Ø 30 mm
120 x 55 mm
n0= 5000 min-1
HW / TCT
t = 48
230 V ~ 50 Hz 1600 W / S1
Ø 250 x
Ø 30 mm
Turntable with precise angle adjustment - 45° to
+ 45° | Locked positions at 0° / 10° / 15° / 22.5° /
30° / 35° / 40°/ 45° | Sawing head can be tilted infinitely from 0° to + 45° to the left | Incl. sawdust bag and
transportation brace
6.4 / 8.7 kg
1
475 x 320 x 290 mm
n0= 4800 min-1
HW / TCT
t = 60
120 x 75 mm
Turntable with precise angle adjustment - 45° to
+ 45° | Locked positions at 0° / 15° / 22.5° / 31.6° /
45° | Sawing head can be tilted infinitely from 0° to +45°
to the left | Incl. sawdust bag and transportation brace |
Incl. laser
11.8 / 14.5 kg
1
510 x 440 x 400 mm
Article number
43.002.90
4 006825 572995
230 V ~ 50 Hz
1800 W
S2 5 min.
Ø 210 x
Ø 30 mm
310 x 62 mm
n0= 5000 min-1
HW / TCT
t = 48
Saw head can be tilted infinitely from 0° to 45° on
both sides | Turntable with precise angle adjustment -45°
to +45° with locking positions | Incl. sawdust bag and
support bar on both sides | Clamping device | Laser (mainspowered) | Double tube-mounted drag function
10.5 / 14.2 kg
1
725 x 455 x 390 mm
Article number
43.001.18
4 006825 540116
Article number
43.008.30
4 006825 573008
SLIDING MITRE SAW
TABLE SAW
TABLE SAW
SAW BLADE SHARPENER
BT-SM 2534 DUAL
BT-TS 800
BT-TS 1500 U
BT-SH 90/350
230 V ~ 50 Hz
2350 W
S6 25%
230 V ~ 50 Hz
800 W
S2 10 min
n0= 2950 min-1
Ø 250 x
Ø 30 mm
340 x 75 mm
Ø 200 x
Ø 16 mm
max. 43 mm
500 x 335 mm
n0= 4000 min-1
HW / TCT
t = 48
Saw head can be tilted infinitely from 0° to 45° on
both sides | Turntable with precise angle adjustment -45°
to +45° with locking positions | Incl. sawdust bag and
support bar on both sides | Clamping device | Laser (mainspowered) | Double tube-mounted drag function
14.8 / 19.5 kg
1
805 x 580 x 465 mm
Article number
Saw blade can be tilted from 0° to 45° to the left |
Adjustable parallel stop with two stop heights | Connection
for dust extractor Ø 36 mm
13.5 / 14.5 kg
1
525 x 355 x 345 mm
43.008.20
4 006825 569292
Weight net / gross
HW / TCT
t = 20
Article number
1500 W
S6 40%
Ø 250 x
Ø 30 mm
max. 75 mm
n0= 5700 min-1
HW / TCT
t = 24
640 x 446 mm 640 x 946 mm
Parallel stop with aluminium rail | Magnifying glass
for numerical scale | Cross stop with angle scale | Saw blade
angle and height adjustment | Powder-coated housing
23.0 / 27.5 kg
1
730 x 590 x 335 mm
43.407.60
4 006825 538083
Packing dimensions
230 V ~ 50 Hz
Article number
110 W
n0= 5300 min-1
S3 50% 15 min
Ø 16 - 32 mm
Ø 90 - 350 mm
For grinding carbide-tipped saw blades | Scale for
precise grinding angle setting | Saw blade clamping device |
Transparent spark guard | Grinding wheel | Handle | Feet
4.0 / 4.8 kg
2
360 x 270 x 290 mm
43.407.53
4 006825 541304
Packaging unit
230 V ~ 50 Hz
Article number
45.000.90
4 006825 551747
17
SCROLL SAW
BAND SAW
STATIONARY PLANER
BELT AND DISK SANDER
BT-SS 405 E
BT-SB 200
BT-SP 1300
BT-US 400
230 V ~ 50 Hz
120 W
S6 30 %
n0= 400 1600 min-1
127 mm
406 mm
413 x 253 mm
Electronic
Chip blower | Electronic blade speed control | Zero
voltage switch | Connection for dust extractor | Adapter for
coping saw blades
13.0 / 14.5 kg
1
640 x 310 x 333 mm
230 V ~ 50 Hz
250 W
S2 15 min
n0= 1400 min-1 1400 x 6.4 mm,
6 Z / 25 mm
90°: 80 mm
45°: 45 mm
200 mm
300 x 300 mm
0° - 45 °
Saw bench angle can be infinitely adjusted from
0° to 45° | Push stick | Saw blade guide infinitely heightadjustable | Adjustable parallel stop with eccentric clamp |
Dust extractor
13.2 / 17.6 kg
1
350 x 270 x 720 mm
Article number
43.090.18
4 006825 540031
Article number
230 V ~ 50 Hz
1280 W
n0 = 9000 min-1
max. 3 mm
230 V ~ 50 Hz
max. 2 mm
max. 100 mm
max. 152 mm
8 m/min.
100 x 915 mm
Aluminium thicknessing table | Parallel stop infinitely adjustable from 0° to + 45° | Pull-out workpiece
support | Tipping guard | Zero voltage switch | Chip extraction Ø 100 / 36 mm
23.5 / 27.5 kg
731 x 390 x 410 mm
43.080.22
4 006825 540215
Article number
BT-WW 1000
350 W
S2 30 min
n0 = 810/1180/ lmax = 1000 mm
1700/2480 min-1 Ømax = 356 mm
Strong guide frame | Tailstock with self-centering
live spindle tip | Workpiece support | Front end driver ring |
Face plate Ø 143 mm | Long-lasting V-belt drive which can
be adjusted to 4 settings
27.5 / 38.0 kg
1
1500 x 230 x 260 mm
Article number
43.121.02
4 006825 540611
18
Weight net / gross
Packing dimensions
Packaging unit
Ø 150
n0 = 1450 min-1
Belt grinding device | Support table (can be angled
from 0° to 45°) | Cross stop (- 60° to + 60°) | Disc
grinder with quick-fit fastening system | 4 rubber feet to
ensure that the machine stands securely
15.6 / 18.0 kg
1
500 x 300 x 260 mm
44.199.41
4 006825 541427
WOODWORKING LATHE
230 V ~ 50 Hz
1
375 W
S2 30 min
Article number
44.192.53
4 006825 541557
CARBIDE METAL SAW BLADE-SET
FOR BT-MS 2112 / BT-SM 2131 DUAL
t
CARBIDE METAL SAW BLADE FOR
BT-MS 2112 / BT-SM 2131 DUAL
t
t
CARBIDE METAL SAW BLADE FOR
BT-MS 2112 / BT-SM 2131 DUAL
Ø 210 x Ø 30 mm | Teeth 24
Ø 210 x Ø 30 mm | Teeth 48
1
Ø 210 x Ø 30 / 20 / 16 mm | Teeth 24 / 48 / 60
1
Article number
45.020.48
1
Article number
45.020.34
Article number
45.021.32
CARBIDE METAL SAW BLADE FOR
BT-MS 250 L / BT-SM 2534 DUAL /
BT-TS 1500 U
CARBIDE METAL SAW BLADE FOR
BT-MS 250 L / BT-SM 2534 DUAL /
BT-TS 1500 U
Ø 250 x Ø 30 mm | Teeth 24
Ø 250 x Ø 30 mm | Teeth 48
1
Ø 250 x Ø 30 mm | Teeth 60
1
Article number
43.111.10
4 006825 431223
43.111.11
4 006825 431230
SCHLEIFPAPIER-SET
FÜR BT-MG
CARBIDE METAL SAW
BLADE180/1
FOR
SET
OF VELCRO
BT-TS
800 GRINDING / SANDING
PAPERS FOR BT-MG 180/1
1
Article number
43.111.13
4 006825 503166
SCHLEIFPAPIER-SET
FÜR WHEEL
BT-MG 180/1
GRINDING/SANDING
FOR
SET
OF VELCRO
BT-SH
90/350GRINDING / SANDING
PAPERS FOR BT-MG 180/1
Article number
45.021.33
4 006825 534276
SAW BLADE SET FOR
BT-SS 405 E
t
t
CARBIDE METAL SAW BLADE FOR
BT-TS 800
Ø 250 x Ø 30 mm | Teeth 24 / 48 / 60
1
Article number
CARBIDE METAL SAW BLADE-SET
BT-MS 250 L / BT-SM 2534 DUAL /
BT-TS 1500 U
t
CARBIDE METAL SAW BLADE FOR
BT-MS 250 L / BT-SM 2534 DUAL /
BT-TS 1500 U
t
4 006825 534269
t
4 006825 456110
t
4 006825 456004
Ø 200 x Ø 16 mm | Teeth 20
Ø 200 x Ø 16 mm | Teeth 48
1
Article number
Ø 100 mm | For carbide metal saw blade
1
45.020.46
4 006825 453706
Article number
Artikelnummer
/ Article number
1
45.020.32
44.305.00
4 006825 456165
CARBIDE METAL BLADE FOR
BT-SB 200
GRINDING BELT SET FOR
BT-US 400
Length 1400 mm | Width 6.4 mm |
Teeth 6 / 25.4 mm
3 pieces | Width / Length 100 x 914 mm | Grit size
60 / 80 / 120 K
1
Article number
4 006825 508116
Article number
1
45.000.95
44.305.00
4 006825 554748
SCHLEIFPAPIER-SET
FÜRPAPER
BT-MG SET
180/1FOR
GRINDING/SANDING
SET
OF VELCRO
BT-US
400 GRINDING / SANDING
PAPERS FOR BT-MG 180/1
1
45.061.56
Article number
Artikelnummer
/ Article number
3 pieces | Velcro fastening | Ø 150 mm | Grit size
80 / 120 / 180 K
1
44.198.30
4 006825 443783
Article number/ Article number
Artikelnummer
5 pieces | Length 127 mm | Teeth 10, 15, 2 x
18, 25 / 25.4 mm
Article number
45.062.00
4 006825 453928
SCHLEIFPAPIER-SET
LATHE BLADE SETFÜR
FORBT-MG 180/1
SET
OF VELCRO
BT-WW
1000GRINDING / SANDING
PAPERS FOR BT-MG 180/1
SCHLEIFPAPIER-SET F
SET OF VELCRO GRIND
PAPERS FOR BT-MG 1
5 pieces | Flat and round-nose chisel | Gouge chisel |
Round and pointed chisel
1
44.198.45
42.580.85
4 006825 529036
Article number/ Article number
Artikelnummer
43.112.00
42.580.85
Artikelnummer / Article number
4 006825 431551
19
PIPE CLEANING HOSE 10 m
For all high pressure cleaners
1
Article number
41.405.65
4 006825 560015
HIGH PRESSURE CLEANER
PUSH SWEEPER
BT-HP 1435
BT-SW 700
LANCE WITH POINT AND
WIDE JET
LANCE WITH ROTOR NOZZLE
For all high pressure cleaners
For all high pressure cleaners
1
1
Article number
230 V ~ 50 Hz
2000 W
n0= 20000
min-1
95 bar / max.
140 bar (EW)
max. 40° C
max. 6 bar
(0.6 MPa)
5m
700 mm
20 l
4 006825 559989
ROTATING WASHING BRUSH
Hose and cable rewind | Quick-coupling with water
pre-filter | Detergent tank | Rotating nozzle | Lance for spot
and wide jet
6.7 / 10.3 kg
ca. 2800 m /h
2
41.405.62
1
580 x 310 x 288 mm
8.8 / 10.0 kg
4 006825 578287
20
Weight net / gross
4 006825 559996
TERRACE CLEANER TR 30
1
For all high pressure cleaners
600 x 215 x 680 mm
41.404.80
41.405.63
Folding double push bar | Easily removable debris
collector | 2 brushes | Housing made of high-grade, impactresistant plastic | Rotating, infinitely height-adjustable
feed-in brushes
For all high pressure cleaners | With pressure
regulation | Brass nozzles / bearing
1
Article number
Article number
Article number
23.520.25
4 006825 568547
Packing dimensions
1
Article number
41.405.64
4 006825 560008
Packaging unit
Article number
41.405.61
4 006825 559972
21
COMPRESSOR KIT
COMPRESSOR
COMPRESSOR
COMPRESSOR
BT-AC 180 KIT
BT-AC 200/24 OF
BT-AC 200/50 OF
BT-AC 230/24
230 V ~ 50 Hz 1.1 kW (1.5 PS) n0 = 2850 min-1
S3 25%
230 V ~ 50 Hz 1.1 kW (1.5 PS) n0 = 2850 min-1
230 V ~ 50 Hz 1.5 kW (2 PS) n0 = 2850 min-1
S2 15 min
220 - 240 V 1.1 kW (1.5 PS) n0 = 3550 min-1
~ 50 Hz
S3 15%
8 bar max.
180 l/min
8 bar max.
140 l/min
l
3m
Oilfree
5.8 / 6.5 kg
5
470 x 120 x 335 mm
Article number
l
24 l
Transport handle | Accessory compartment | Compressed air hose with quick-lock coupling | Blow-out pistol
with pressure gauge | Hose for use as tire pressure gauge |
Nozzle for use as blow-out pistol | Adaptor set
Oilfree
Pressure gauge & quick-lock coupling | Foot with
suction cup function | Intake filter, non-return valve, safety
valve | Pressure regulator | Drain cock | 10 year warranty
against rusting through of the tank
19.5 / 21.0 kg
1
4 006825 553734
Article number
Oilfree
24 l
Pressure gauge & quick-lock coupling | Foot with
suction cup function | Intake filter, non-return valve, safety
valve | Pressure regulator | Drain cock | 10 year warranty
against rusting through of the tank
23.3 / 26.0 kg
4 006825 550009
Article number
Oil lubricated
Pressure gauge & quick-lock coupling | Foot with
suction cup function | Intake filter, non-return valve, safety
valve | Pressure regulator | Drain cock | 10 year warranty
against rusting through of the tank
1
24.8 / 26.6 kg
770 x 320 x 725 mm
40.205.05
8 bar max.
206 l/min
l
50 l
570 x 445 x 255 mm
40.205.20
8 bar max.
140 l/min
1
595 x 270 x 605 mm
40.204.80
Article number
4 006825 570113
40.103.50
4 006825 566772
COMPRESSOR
COMPRESSOR
COMPRESSOR-SET
BT-AC 270/50
BT-AC 320/50/10
BT-AC 400/50 Kit
l
230 V ~ 50 Hz
1.8 kW
(2.5 PS)
n0 = 2850 min-1
8 bar max.
262 l/min
l
10 bar max.
320 l/min
230 V ~ 50 Hz 2.2 kW (3 PS) n0 = 2850 min-1
S3 25%
8 bar max.
400 l/min
50 l
Oil lubricated
l
50 l
Oil lubricated
50 l
Pressure gauge & quick-lock coupling | Foot with
suction cup function | Intake filter, non-return valve, safety
valve | Pressure regulator | Drain cock | 10 year warranty
against rusting through of the tank
32.0 / 35.0 kg
1
775 x 325 x 730 mm
Article number
Weight net / gross
Oil lubricated
Akku-Stabschrauber
Komplett
mit |Akku
| VerBelt drive | Oil level |check
by scale
Pressure
reriegelungstaste
| Ladekontrollleuchte
| Ladegerät
| 16-fache
ducer | Drain cock
| Pressure gauge and
quick-lock
coupling
Drehmomenteinstellung
| Schnellspannbohrfutter
| Rechts-|
for unregulated / regulated
working pressure | 2 cylinders
und
Linkslauf
| Drehzahl-Regelelektronik
am Gerät
10 year
warranty
against rusting through| Bithalter
of the tank
Cordless screwdriver | Complete with battery pack |
Swivel handle | Charging indicator light | Battery charger |
16 torque settings | Keyless chuck | Clockwise/ counter-clockwise switch | Speed control electronics | Integrated bit holder
60.0 / 63.0 kg
1
840 x 410 x 750 mm
40.103.70
4 006825 570755
22
230 V ~ 50 Hz 2.2 kW (3 PS) n0 = 2850 min-1
Article number
Pressure gauge and quick-lock coupling | Intake filter, non-return valve, safety valve | ON/OFF switch | Pressure regulator | Drain cock | 10 years warranty against rusting through of the tank |Incl. impact wrench, chisel hammer, stapler/nailer, pin
grinder, paint spray gun, spraying gun, tire inflator, blow-out pistol, fabric hose 15 m, inflation adaptor set (8 pcs.)
52.6 / 58.0 kg
800 x 365 x 910 mm
40.103.80
Article number
4 006825 574746
Packing dimensions
1
40.102.56
4 006825 586442
Packaging unit
COMPRESSOR
COMPRESSOR
AIR BRUSH COMPRESSOR KIT
BT-AC 400/50
BT-AC 240/50/10 OF
BT-AB 19/4 KIT
230 V ~ 50 Hz
230 V ~ 50 Hz
230 V ~ 50 Hz 2.6 kW (3.5 PS) n0 = 2850 min-1
S2 30 min
8 bar max.
400 l/min
l
1.5 kW
S3 25%
n0 = 4000 min-1
10 bar max.
240 l/min
90 W
n0 = 1450 min-1
4 bar max.
19 l/min
l
50 l
Oil lubricated
50 l
Oilfree
SHORT BLOW-OUT PISTOL
Oilfree
Transportgriff, große Räder für einfachen Transport | Druckgauge| Rückschlagventil
& quick-lock| coupling
schalter |Pressure
Sicherheitsventil
Ansaugfilter| | Intake
Pumpe
fiölgeschmiert
lter, non-return
valve, safety
valve | |ON/OFF
switchEnt-|
| Ölstandskontrolle
über Schauglas
Druckminderer,
Pressure
regulator
| Drain und
cockSchnellkupplung
| 10 year warranty
against
wässerungshahn
| Manometer
für un-/geregelten
rusting
through
of the|tank
Arbeitsdruck
| 2 Zylinder
10 Jahre Garantie gegen Durchrostung des
Transport handle, large wheels for easy transport |
Kessels
Pressure switch | intake filter | non-return valve | safety valve | pump
lubricated with oil | Oil level check by scale | Pressure reducer, drain
cock | Pressure gauge and quick-lock coupling for unregulated/regulated
working 40.0
pressure,
2 cylinders
/ 42.5
kg | 10 year warranty against rusting
1 through
of the tank
800 x 360 x 730 mm
Transportgriff, Räder für einfachen Transport | DruckschalPressure gauge
& quick-lock coupling
filter,
ter | Sicherheitsventil
| Rückschlagventil
| Ansaugfi| Intake
lter | Pumpe
non-return
valve, safety
valve | Pressure| regulator
ölfrei | Druckminderer,
Entwässerungshahn
Manometer| ON/
und
OFF
switch | Drain
cock | 10Arbeitsdruck
year warranty
against| 10rusting
Schnellkupplung
für geregelten
| 1 Zylinder
Jahre
through
the tank
Transport
Garantie ofgegen
Durchrostung des Kessels
handle, large wheels for easy transport | Pressure switch | intake
filter | non-return valve | safety valve | pump oilfree | Pressure
reducer | drain cock | Pressure gauge and quick-lock coupling for
regulated working pressure, 1 cylinder | 10 year warranty against
rusting through
the tank
22.2 / of23.5
kg
1
Article number
Article number
865 x 340 x 340 mm
1 x airbrush spray gun (double action) | 1 x paint
cup with cover | 1 x paint cup with cover and suction hose |
1 x paint cup without cover | 180 cm compressed air hose |
Pressure gauge | Gun holder
4.7 / 5.6 kg
SCHLEIFPAPIER-SET F
SET OF VELCRO GRIND
PAPERS FOR BT-MG 1
1
For all compressors
265 x 152 x 305 mm
1
40.101.70
4 006825 550252
LONG BLOW-OUT PISTOL
4 006825 576092
SCHLEIFPAPIER-SET
FÜR BT-MG 180/1
TIRE PRESSURE GAUGE
SET OF VELCRO GRINDING / SANDING
PAPERS FOR BT-MG 180/1
For all compressors
Working pressure 0 - 8 bar | Incl. discharge nozzle
1
Article number
40.103.90
1
41.331.02
41.370.00
42.580.85
PAINT SPRAY GUN WITH
SUCTION-FEED CAN
Point / wide cone regulator | Filling max. 0.6 l |
Working pressure 3 - 3.5 bar | Incl. air volume control
Rotating nozzle with point/wide cone regulator |
Filling max. 1 l | Working pressure 3 - 4 bar
4 006825 574180
Article number
4 006825 411003
41.331.00
Artikelnummer / Article number
4 006825 411065
PAINT SPRAY GUN WITH
GRAVITY-FEED CAN
Working pressure 0 - 8 bar | Incl. discharge nozzle
and big gauge | Incl. tire inflating adapter
Point / wide cone regulator | Filling max. 0.6 l |
Working pressure 3 - 4 bar
1
Article number
41.331.10
4 006825 574173
Article number
4 006825 411010
Filling max. 0.9 l | Working pressure 3 - 6 bar
Article number
41.330.00
COMPRESSED AIR TOOL SET
1
41.329.00
Article number
TIRE PRESSURE GAUGE PROFI
SPRAY GUN WITH
SUCTION-FEED CAN
1
41.330.30
4 006825 578430
4 006825 411164
PAINT SPRAY GUN PROFI WITH
GRAVITY-FEED CAN
1
40.203.70
1
Article number/ Article number
Artikelnummer
4 006825 417067
Article number
Article number
SCHLEIFPAPIER-SET F
SET OF VELCRO GRIND
PAPERS FOR BT-MG 1
3 pieces | Spiral hose 4 m
1
41.332.00
4 006825 411072
Article number
41.327.41
Artikelnummer / Article number
4 006825 417050
23
PROFESSIONAL COMPRESSED AIR
TOOL SET
SCHLEIFPAPIER-SET
FÜR BT-MG 180/1
JET GUN WITH SUCTION-FEED
CAN
SET OF VELCRO GRINDING / SANDING
PAPERS FOR BT-MG 180/1
5 pieces | Spiral hose 4 m
Filling max. 1 l | Working pressure 3 - 8 bar
1
1
Article number
41.327.20
4 006825 410020
AIR IMPACT SCREWDRIVER SET
DSS 260/2
Working pressure max. 6.3 bar | Air consump.
approx. 115 l/min | Torque max. 312 Nm
1
41.333.00
42.580.85
4 006825 411089
SCHLEIFPAPIER-SET
FÜR BT-MG 180/1
AIR RATCHET SCREWDRIVER
SET
SET
OF 200/2
VELCRO GRINDING / SANDING
DRS
PAPERS FOR BT-MG 180/1
Working pressure max. 6.3 bar | Air consump.
approx. 122 l/min | Torque max. 68 Nm
41.389.10
4 006825 504361
AIR TACKER SET
DTA 25/2
41.391.70
42.580.85
4 006825 504385
SCHLEIFPAPIER-SET
BT-MG 180/1
COMPRESSED AIRFÜR
ECCENTRIC
SET
OF VELCRO
/ SANDING
SANDER
DSEGRINDING
125
PAPERS FOR BT-MG 180/1
Working pressure max. 8.3 bar | Air consump. approx. 0.11 l/shot | Clamping width 5.7 mm
1
SCHLEIFPAPIER-SET
FÜR BT-MG
AIR CHIPPING HAMMER
SET180/1
SET
OF VELCRO
DMH
250/2 GRINDING / SANDING
PAPERS FOR BT-MG 180/1
Working pressure max. 6.3 bar | Air consump.
approx. 115 l/min | Blow rate 4500/min
41.377.55
Article number/ Article number
Artikelnummer
4 006825 504415
FILTER PRESSURE REDUCER
4 006825 581607
41.390.08
42.580.85
SCHLEIFPAPIER-SET
FÜR BT-MG 180/1
MINI OILER
SET OF VELCRO GRINDING / SANDING
PAPERS FOR BT-MG 180/1
41.341.00
4 006825 410044
Weight net / gross
41.350.02
42.580.85
1
4 006825 410181
Packing dimensions
SCHLEIFPAPIER-SET
FÜR
AIR ROD GRINDER
SETBT-MG 180/1
SET
OF 250/2
VELCRO GRINDING / SANDING
DSL
PAPERS FOR BT-MG 180/1
Working pressure max. 6.3 bar | Air consump.
approx. 128 l/min | Idling speed 22000 min-1
Article number/ Article number
Artikelnummer
41.385.20
42.580.85
4 006825 504378
FILTER PRESSURE REDUCER
SCHLEIFPAPIER-SET F
SET OF VELCRO GRIND
PAPERS FOR BT-MG 1
R 1/4" external thread
Article number
41.342.00
Artikelnummer / Article number
4 006825 410051
4 006825 581614
R 3/8” external thread | Adjustable oil quantity
41.350.01
42.580.85
Artikelnummer / Article number
1
Article number/ Article number
Artikelnummer
R 1/4" external thread | Adjustable oil quantity
Article number/ Article number
Artikelnummer
41.335.01
42.580.85
4 006825 411133
R 1/4" internal thread | R 1/4" external thread
SCHLEIFPAPIER-SET
FÜR BT-MG 180/1
COMBINATION CONDITIONING
SET
OF VELCRO
GRINDING / SANDING
UNIT
WITH OILER
PAPERS FOR BT-MG 180/1
1
Article number
Article number/ Article number
Artikelnummer
4 006825 504392
QUICK-LOCK COUPLING
SCHLEIFPAPIER-SET
FÜR BT-MG 180/1
COMBINATION CONDITIONING
SET
OF VELCRO
GRINDING / SANDING
UNIT
WITH OILER
PAPERS FOR BT-MG 180/1
R 3/8" external thread
1
41.333.25
42.580.85
Working pressure 3 - 8 bar
1
Article number/ Article number
Artikelnummer
1
Article number
24
41.334.00
42.580.85
4 006825 411102
Grinding disk Ø 125 mm | Working pressure max.
6.3 bar / Air consump. approx. 106 l/min
SCHLEIFPAPIER-SET F
SET OF VELCRO GRIND
PAPERS FOR BT-MG 1
1
Article number/ Article number
Artikelnummer
1
Article number/ Article number
Artikelnummer
SCHLEIFPAPIER-SET
UNDERSEAL GUNFÜR BT-MG 180/1
SET OF VELCRO GRINDING / SANDING
PAPERS FOR BT-MG 180/1
Working pressure 6 bar max. | Nozzles 3 x Ø 5 mm
1
Article number/ Article number
Artikelnummer
1
Article number
SCHLEIFPAPIER-SET
FÜR BT-MG
180/1
SUCTION-FEED SPRAY
PISTOL
SET OF VELCRO GRINDING / SANDING
PAPERS FOR BT-MG 180/1
COMPLETE SPIRAL HOSE
SCHLEIFPAPIER-SET F
SET OF VELCRO GRIND
PAPERS FOR BT-MG 1
Length 4 m / Ø 6 mm | Maximum pressure 8 bar |
Nipple and coupling 6.35 mm (1/4")
1
Article number/ Article number
Artikelnummer
41.350.00
42.580.85
4 006825 410075
Packaging unit
Article number
41.394.10
4 006825 411737
Artikelnummer / Article number
COMPLETE SPIRAL HOSE
Length 8 m / Ø 6 mm | Maximum pressure 8 bar |
Nipple and coupling 6.35 mm (1/4")
1
SCHLEIFPAPIER-SET
FÜR
BT-MG 180/1
COMPLETE FABRIC
HOSE
SET OF VELCRO GRINDING / SANDING
PAPERS FOR BT-MG 180/1
Length 10 m / Ø 6 mm | Maximum pressure 15 bar |
Nipple and coupling
1
Article number
41.394.20
4 006825 411744
AUTOMATIC HOSE ROLLER
1
41.381.00
42.580.85
4 006825 410082
SCHLEIFPAPIER-SET
FÜR BT-MG 180/1
QUICK-LOCK COUPLING
SET OF VELCRO GRINDING / SANDING
PAPERS FOR BT-MG 180/1
41.380.00
4 006825 509564
QUICK-LOCK COUPLING
41.392.07
42.580.85
4 006825 560824
QUICK-LOCK COUPLING
R 3/8" internal thread
41.392.05
4 006825 410327
ATTACHABLE SLEEVE
41.393.01
ATTACHABLE SLEEVE
R 3/8" external thread
R 1/4" internal thread
1
4 006825 411690
41.392.08
4 006825 560831
Article number
Article number
Artikelnummer / Article number
SCHLEIFPAPIER-SET F
SET OF VELCRO GRIND
PAPERS FOR BT-MG 1
Ø 6 mm | One-hand quick-lock coupling
1
Article number
41.393.02
4 006825 581645
Article number
Article number
41.395.00
Artikelnummer / Article number
4 006825 410136
SCHLEIFPAPIER-SET
FÜR
BT-MG 180/1
HOSE CONNECTION
TUBE
SET OF VELCRO GRINDING / SANDING
PAPERS FOR BT-MG 180/1
Ø 9 mm
1
4 006825 581621
41.392.06
4 006825 410334
Ø 6 mm
41.396.61
SCHLEIFPAPIER-SET F
SET OF VELCRO GRIND
PAPERS FOR BT-MG 1
HOSE CONNECTOR SET NW7
HOSE CONNECTION TUBE
1
41.396.60
Artikelnummer / Article number
1
Article number
Ø 9 mm
41.382.10
42.580.85
4 006825 574166
Ø 9 mm
4 006825 581638
Ø 6 mm
Article number/ Article number
Artikelnummer
QUICK-LOCK COUPLING
1
Article number
SCHLEIFPAPIER-SET F
SET OF VELCRO GRIND
PAPERS FOR BT-MG 1
Length 15 m / Ø 9 mm | Maximum pressure 10 bar |
Nipple and quick release coupling
QUICK-LOCK COUPLING
QUICK-LOCK COUPLING
1
Article number
4 006825 410099
Ø 6 mm
1
Article number
41.382.00
1
Article number/ Article number
Artikelnummer
SCHLEIFPAPIER-SET
FÜR
BT-MG 180/1
COMPLETE FABRIC
HOSE
SET OF VELCRO GRINDING / SANDING
PAPERS FOR BT-MG 180/1
1
Article number
R 1/4" external thread
1
Article number
Length 15 m / Ø 6 mm | Maximum pressure 15 bar |
Nipple and coupling
1
Article number/ Article number
Artikelnummer
Length 9 m + 1 m | Maximum pressure 12 bar |
Swivelling holder
COMPLETE FABRIC HOSE
1
41.393.10
4 006825 411720
Article number/ Article number
Artikelnummer
41.393.20
42.580.85
4 006825 581652
25
QUICK-LOCK COUPLING
HOSE NOZZLE
HOSE NOZZLE
Ø 6 mm | R 1/4" external thread
Ø 6 mm | R 3/8" external thread
1
1
Article number
41.396.65
4 006825 581676
THREADED NIPPLE
41.396.66
4 006825 581669
SCHLEIFPAPIER-SET
FÜR BT-MG 180/1
THREADED NIPPLE
SET OF VELCRO GRINDING / SANDING
PAPERS FOR BT-MG 180/1
41.396.40
4 006825 411676
REDUCTION
41.396.45
42.580.85
4 006825 581683
4 006825 411669
CLIP KIT
41.396.00
42.580.85
4 006825 411621
4 006825 411706
4 006825 411683
41.396.20
4 006825 411652
Article number/ Article number
Artikelnummer
4 006825 511475
Artikelnummer / Article number
SCHLEIFPAPIER-SET
FÜR BT-MG 180/1
DISTRIBUTOR
SET OF VELCRO GRINDING / SANDING
PAPERS FOR BT-MG 180/1
SCHLEIFPAPIER-SET F
SET OF VELCRO GRIND
PAPERS FOR BT-MG 1
R 3/8" internal thread
1
Article number/ Article number
Artikelnummer
41.396.05
42.580.85
4 006825 562330
Article number/ Article number
Artikelnummer
41.396.80
42.580.85
4 006825 411713
SCHLEIFPAPIER-SET
FÜR BT-MG
180/1
SPECIAL COMPRESSED
AIR OIL
SET OF VELCRO GRINDING / SANDING
PAPERS FOR BT-MG 180/1
1
Packing dimensions
41.396.10
42.580.85
Contents: 500 ml | For all compressed air tools
41.396.95
SCHLEIFPAPIER-SET F
SET OF VELCRO GRIND
PAPERS FOR BT-MG 1
4 006825 411645
8 pieces
Article number
Artikelnummer / Article number
1
Article number
MICHELIN-NIPPLE
1
41.396.70
41.396.50
42.580.85
R 3/8" external thread
1
Article number/ Article number
Artikelnummer
Article number/ Article number
Artikelnummer
SCHLEIFPAPIER-SET
DOUBLE NIPPLE FÜR BT-MG 180/1
SET OF VELCRO GRINDING / SANDING
PAPERS FOR BT-MG 180/1
R 1/2” external thread | R 3/8" internal thread
INFLATION ADAPTER KIT
1
Weight net / gross
DOUBLE NIPPLE
R 3/8" external thread | R 1/4" internal thread
For external diameters of 8 - 12 mm | 5 pieces
Article number
4 006825 562347
SCHLEIFPAPIER-SET
FÜR BT-MG 180/1
REDUCTION
SET OF VELCRO GRINDING / SANDING
PAPERS FOR BT-MG 180/1
1
41.396.30
41.396.55
SCHLEIFPAPIER-SET
FÜR BT-MG 180/1
REDUCTION
SET OF VELCRO GRINDING / SANDING
PAPERS FOR BT-MG 180/1
R 3/8" external thread | R 1/4" external thread
1
1
Article number
1
Article number/ Article number
Artikelnummer
SCHLEIFPAPIER-SET F
SET OF VELCRO GRIND
PAPERS FOR BT-MG 1
R 3/8" external thread
R 1/4" external thread
1
Article number
R 1/4" external thread
R 3/8" internal thread
1
Article number
SCHLEIFPAPIER-SET
FÜR BT-MG 180/1
THREADED NIPPLE
SET OF VELCRO GRINDING / SANDING
PAPERS FOR BT-MG 180/1
1
Article number
R 1/4" internal thread
26
THREADED NIPPLE
1
Article number
41.393.30
4 006825 588712
Packaging unit
Article number/ Article number
Artikelnummer
41.383.10
42.580.85
4 006825 411270
Artikelnummer / Article number
COMPRESSED AIR NAILS
SCHLEIFPAPIER-SET
BT-MG 180/1
COMPRESSED AIRFÜR
NAILS
SET OF VELCRO GRINDING / SANDING
PAPERS FOR BT-MG 180/1
SCHLEIFPAPIER-SET
BT-MG 180/1
COMPRESSED AIRFÜR
NAILS
SET OF VELCRO GRINDING / SANDING
PAPERS FOR BT-MG 180/1
SCHLEIFPAPIER-SET
BT-MG 180/1
COMPRESSED AIRFÜR
NAILS
SET OF VELCRO GRINDING / SANDING
PAPERS FOR BT-MG 180/1
Dimensions 25 mm | 3000 pieces
Dimensions 40 mm | 3000 pieces
Dimensions 50 mm | 3000 pieces
Dimensions 15 mm | 3000 pieces
1
1
Article number
41.378.70
4 006825 504453
COMPRESSED AIR CLAMPS
41.378.71
42.580.85
SCHLEIFPAPIER-SET
BT-MG 180/1
COMPRESSED AIRFÜR
CLAMPS
SET OF VELCRO GRINDING / SANDING
PAPERS FOR BT-MG 180/1
41.378.50
4 006825 504422
41.378.72
42.580.85
SCHLEIFPAPIER-SET
BT-MG 180/1
COMPRESSED AIRFÜR
CLAMPS
SET OF VELCRO GRINDING / SANDING
PAPERS FOR BT-MG 180/1
41.378.55
42.580.85
4 006825 504439
41.378.73
42.580.85
Artikelnummer / Article number
4 006825 505795
SCHLEIFPAPIER-SET
BT-MG 180/1
COMPRESSED AIRFÜR
CLAMPS
SET OF VELCRO GRINDING / SANDING
PAPERS FOR BT-MG 180/1
Dimensions 5.7 x 25 mm | 3000 pieces
1
Article number/ Article number
Artikelnummer
Article number/ Article number
Artikelnummer
4 006825 504866
Dimensions 5.7 x 16 mm | 3000 pieces
1
Article number
1
Article number/ Article number
Artikelnummer
4 006825 504460
Dimensions 5.7 x 13 mm | 3000 pieces
1
1
Article number/ Article number
Artikelnummer
SCHLEIFPAPIER-SET F
SET OF VELCRO GRIND
PAPERS FOR BT-MG 1
SCHLEIFPAPIER-SET F
SET OF VELCRO GRIND
PAPERS FOR BT-MG 1
Dimensions 5.7 x 40 mm | 3000 pieces
1
Article number/ Article number
Artikelnummer
41.378.60
42.580.85
4 006825 504446
Article number/ Article number
Artikelnummer
41.378.61
42.580.85
Artikelnummer / Article number
4 006825 505788
Note: For safe handling of the products please refer to the instructions in the operating manual.
27
TILE CUTTING MACHINE
DIAMOND CUTTING WHEEL
BT-TC 600
BT-TC 600
TURBO DIAMOND CUTTING WHEEL
BT-TC 600
Ø 180 x Ø 25.4 mm
Ø 180 x Ø 25.4 mm
1
1
Article number
230 V ~ 50 Hz
max. 35 mm
600 W
S2 10 min
n0 = 2950 min-1 Ø 180 x Ø 25.4 mm
43.011.70
4 006825 432015
Article number
Diamond cutting wheel | Water bath container |
Mitre stop | Parallel stop | RCD plug for protection of life
and health | Workbench can be tilted to 45°
1
385 x 350 x 195 mm
Article number
43.011.63
4 006825 540635
28
Weight net / gross
Packing dimensions
43.011.76
4 006825 505481
330 x 360 mm
9.2 / 10.0 kg
SCHLEIFPAPIER-SET FÜR BT-MG 180/1
SET OF VELCRO GRINDING / SANDING
PAPERS FOR BT-MG 180/1
Packaging unit
Artikelnummer / Article number
42.580.85
29
ELECTRIC WELDER
ELECTRIC WELDER
ELECTRIC WELDER
INVERTER WELDER
BT-EW 150
BT-EW 160
BT-EW 200
BT-IW 100
230 V ~ 50 Hz
I2: 40 - 80 A Ø 1.6 - 2.5 mm
Ik max.: 120 A
16 A
230/400 V
~ 50 Hz
16 A
I2: 55 - 160 A
Imax: 250 A
Ø 2 - 4 mm
230/400 V
~ 50 Hz
16 A
I2: 57 - 200 A
Ø 2 - 4 mm
230 V ~ 50 Hz
16 A
I2: 10 - 80 A
Ø 1.6 - 2.5 mm
TIG / WIG
OPTION
Infinitely adjustable welding current | Thermostat
with pilot lamp | Carry handle
11.2 / 12.1 kg
1
400 x 230 x 290 mm
20.6 / 22.7 kg
1
15.440.54
4 006825 546460
Fan cooling | Infinitely adjustable welding current
| Thermostat with pilot lamp | Mobile | Adapter cable
230/400 V
21.6 / 23.2 kg
490 x 280 x 335 mm
Article number
1
4.1 / 5.5 kg
490 x 280 x 340 mm
Article number
15.460.40
4 006825 546392
Fan cooling | Thermostat with pilot lamp | Infinitely
adjustable welding current | Electrode holder | Earth terminal |
Carrying strap | TIG equipment available as an optional
accessory
1
220 x 180 x 270 mm
Article number
15.490.40
Article number
15.441.11
Hinweis:
der6Produkte
4 Zur
0 0sicheren
6 8 2Anwendung
5 541
5 6 beachten Sie bitte die Hinweise
4 in0der
0 6Bedienungsanleitung.
825 546477
INVERTER WELDER
SHIELDING GAS WELDER
SHIELDING GAS WELDER
SHIELDING GAS WELDER
BT-IW 150
BT-GW 150
BT-GW 170
BT-GW 190 D
230V ~ 50 Hz
16 A
I2: 20 - 150 A
Ø 1.6 - 4 mm
TIG / WIG
OPTION
Fan cooling | Thermostat with pilot lamp | Infinitely
adjustable welding current | Electrode holder | Earth
terminal | Carrying strap | TIG equipment available as an
optional accessory
5.8 / 7.1 kg
1
350 x 205 x 215 mm
Article number
Weight net / gross
230 V ~ 50 Hz
16 A
25 - 120 A
(max. 150 A)
Ø 0.6 - 0.8 mm
max. 5 kg
Infinitely
6x
Fan cooling | Thermostat with pilot lamp | Complete
with flexible hose pack | Infinitely adjustable wire feed |
Gas-cooled torch | Welding shield | Pressure reducer | 2
wheels
25.4 / 28.6 kg
1
695 x 300 x 450 mm
15.441.50
4 006825 578249
30
Fan cooling | Infinitely adjustable welding current |
Thermostat with pilot lamp | Mobile | 2 mains lead
Article number
16 A
25 - 135 A
(max. 170 A)
Ø 0.6 - 0.8 mm
max. 5 kg
Infinitely
6x
Fan cooling | Thermostat with pilot lamp | Complete
with flexible hose pack | Infinitely adjustable wire feed |
Gas-cooled torch | Welding shield | Pressure reducer | 4
wheels
34.6 / 37.0 kg
1
705 x 325 x 460 mm
15.749.70
4 006825 538052
Packing dimensions
230 V ~ 50 Hz
Article number
16 A
25 - 160 A
(max. 190 A)
Ø 0.6 - 1.0 mm
max. 5 kg
Infinitely
6x
Fan cooling | Thermostat with pilot lamp | Complete
with flexible hose pack | Infinitely adjustable wire feed |
Gas-cooled torch | Welding shield and adapter cable | Pressure reducer | 4 wheels
38.1 / 41.0 kg
1
705 x 325 x 470 mm
15.749.80
4 006825 538069
Packaging unit
230 V/1 ~
50 Hz
Article number
15.749.90
4 006825 538076
FLUX CORED WIRE WELDER
WELDING TEXTBOOK “PRACTICAL
WELDING“
BT-FW 100
SCHLEIFPAPIER-SET
WELDING SHIELDFÜR BT-MG 180/1
SET OF VELCRO GRINDING / SANDING
PAPERS FOR BT-MG 180/1
For all conventional welding methods | In German
language
1
1
Article number
230 V ~ 50 Hz
16 A
15.907.00
HEAD WELDING SAFETY SHIELD
max. 0.4 kg
Carrying strap | Earth terminal | Burner | Infinitely
adjustable wire feed | Overheating indicator | Welding shield |
Slag hammer | Fan cooling
14.0 / 15.3 kg
15.752.20
4 006825 549928
LEATHER WELDING GAUNTLETS
SCHLEIFPAPIER-SET
FÜR BT-MG
180/1
AUTOMATIC WELDING
SCREEN
SET OF VELCRO GRINDING / SANDING
PAPERS FOR BT-MG 180/1
1
Article number
15.842.10
4 006825 152135
SCHLEIFPAPIER-SET
BT-MG 180/1
LEATHER WELDINGFÜR
APRON
SET OF VELCRO GRINDING / SANDING
PAPERS FOR BT-MG 180/1
Schweißstrom max. 300 A
Max. welding current 300 A
1
DIN GLASSES
SCHLEIFPAPIER-SET F
SET OF VELCRO GRIND
PAPERS FOR BT-MG 1
15.935.00
4 006825 156959
EARTH TERMINAL FOR
ALL WELDING SETS
15.936.00
42.580.85
4 006825 156980
SCHLEIFPAPIER-SET
FÜRFOR
BT-MG 180/1
ELECTRODE HOLDER
SET
OFELECTRIC
VELCRO GRINDING
/ SANDING
ALL
WELDERS
PAPERS FOR BT-MG 180/1
Max. welding current 300 A
4 006825 547191
SCHLEIFPAPIER-SET
FÜR BT-MG 180/1
STEEL WIRE BRUSH
SET OF VELCRO GRINDING / SANDING
PAPERS FOR BT-MG 180/1
4 006825 156805
Article number/ Article number
Artikelnummer
SCHLEIFPAPIER-SET
FÜR BT-MG 180/1
ALL-METAL SLAG HAMMER
SET OF VELCRO GRINDING / SANDING
PAPERS FOR BT-MG 180/1
Schweißstrom
For all electric
max. 300
and flAux-cored wire welders
Max. welding current 300 A
15.934.00
42.580.85
4 006825 156904
SCHLEIFPAPIER-SET
ANGLE MAGNET FÜR BT-MG 180/1
SET
OF ALL
VELCRO
GRINDING
/ SANDING
FOR
WELDING
SETS
PAPERS FOR BT-MG 180/1
4 006825 156812
Artikelnummer / Article number
SCHLEIFPAPIER-SET F
SET OF VELCRO GRIND
PAPERS FOR BT-MG 1
Schweißstrom max. 300 A
Max. welding current 300 A
Article number/ Article number
Artikelnummer
Article number/ Article number
Artikelnummer
15.841.10
42.580.85
Artikelnummer / Article number
4 006825 152210
SCHLEIFPAPIER-SET
FÜR BT-MG
180/1
GAS NOZZLE CLEANER
FOR ALL
SET
OF VELCROGAS
GRINDING
/ SANDING
SHIELDING
WELDERS
PAPERS FOR BT-MG 180/1
With 3 flexible cleaning blades
1
15.927.00
42.580.85
15.843.00
4 006825 152043
45 °/ 90° / 135°
1
15.925.00
Article number
1
Article number/ Article number
Artikelnummer
Max. welding current 250 A
1
15.842.50
44.305.00
1
Article number/ Article number
Artikelnummer
5 x clear glass | 1 x welding glass DIN 9 |
Dimension: 110 x 90 mm
1
Article number
Artikelnummer
/ Article number
Schweißstrom max. 300 A
Max. welding current 300 A
1
Article number
4 006825 152036
Protection class 9 - 13 | Shading time: 1/30000 s |
Solar area
1
Article number
15.842.00
42.580.85
1
515 x 230 x 340 mm
Article number
Article number/ Article number
Artikelnummer
2x
45 / 90 A
4 006825 156331
Ø 0.9 mm
DIN glas
1
15.922.00
42.580.85
4 006825 152258
Article number/ Article number
Artikelnummer
15.924.00
42.580.85
4 006825 156775
31
CONICAL GAS NOZZLE FOR ALL
SHIELDING GAS WELDERS
SCHLEIFPAPIER-SET
BT-MGFOR
180/1
CYLINDRICAL GASFÜR
NOZZLE
ALL
SET
OF VELCROGAS
GRINDING
/ SANDING
SHIELDING
WELDERS
PAPERS FOR BT-MG 180/1
2 pieces
SCHLEIFPAPIER-SET
FÜR BT-MG 180/1
CONTACT TUBES FOR
SET
OFSHIELDING
VELCRO GRINDING
/ SANDING
ALL
GAS WELDERS
PAPERS FOR BT-MG 180/1
2 pieces
1
Ø 0.6 mm | 5 pieces
1
Article number
15.761.10
4 006825 156669
CONTACT TUBES FOR
ALL SHIELDING GAS WELDERS
15.761.00
42.580.85
CONTACT TUBES FOR
BT-FW 100
1
Article number/ Article number
Artikelnummer
4 006825 156010
Ø 1 mm | 5 pieces
Ø 0.8 mm | 5 pieces
1
Article number/ Article number
Artikelnummer
15.762.00
42.580.85
4 006825 156683
PRESSURE REDUCERS FOR
ALL SHIELDING GAS WELDERS
Ø 0.9 mm | 5 pieces
1 pressure gauges | Infinitely adjustable delivery
rate
1
1
Article number
15.762.20
4 006825 156065
PISTON SPRAY FOR
ALL SHIELDING GAS WELDERS
1
Article number
15.762.60
4 006825 554779
SCHLEIFPAPIER-SET
ARGON GAS FOR FÜR BT-MG 180/1
SET
OFSHIELDING
VELCRO GRINDING
/ SANDING
ALL
GAS WELDERS
PAPERS FOR BT-MG 180/1
Capacity 500 ml
1
15.760.51
4 006825 156522
CO2 GAS FOR
ALL SHIELDING GAS WELDERS
4 006825 156447
ARGON-O2 GAS FOR
ALL SHIELDING GAS WELDERS
Filling pressure: 60 bar | Disposable
15.765.01
42.580.85
4 006825 156119
SCHLEIFPAPIER-SET
FÜR BT-MG
180/1
WIG WELDING TORCH
KIT FOR
SET
OF VELCRO
GRINDING
/ SANDING
BT-IW
100, BT-IW
150, BT-IW
160
PAPERS FOR BT-MG 180/1
1
4 006825 156102
32
Weight net / gross
4 006825 156690
PRESSURE REDUCERS FOR
ALL SHIELDING GAS WELDERS
15.765.02
4 006825 156126
WELDING WIRE: STEEL FOR
ALL SHIELDING GAS WELDERS
Article number
15.441.32
42.580.85
4 006825 580570
Packing dimensions
15.765.06
Artikelnummer / Article number
4 006825 156546
SCHLEIFPAPIER-SET
FÜR BT-MG 180/1
ARGON-CO2 GAS FOR
SET
OFSHIELDING
VELCRO GRINDING
/ SANDING
ALL
GAS WELDERS
PAPERS FOR BT-MG 180/1
SCHLEIFPAPIER-SET F
SET OF VELCRO GRIND
PAPERS FOR BT-MG 1
Argon 80% CO2 20% | Filling pressure: 60 bar |
Disposable
Article number/ Article number
Artikelnummer
15.716.03
42.580.85
4 006825 156454
SCHLEIFPAPIER-SET
FÜR BT-MG
WELDING WIRE: STEEL
FOR 180/1
SET
OFSHIELDING
VELCRO GRINDING
/ SANDING
ALL
GAS WELDERS
PAPERS FOR BT-MG 180/1
Ø 0.6 mm | Weight 5 kg
1
Article number/ Article number
Artikelnummer
SCHLEIFPAPIER-SET F
SET OF VELCRO GRIND
PAPERS FOR BT-MG 1
2 pressure gauges | Cylinder pressure | Infinitely
adjustable delivery rate
Ø 0.6 mm | Weight 0.8 kg
1
15.765.00
15.762.10
1
Article number
Filling pressure: 60 bar | Disposable
Article number
15.765.08
1
Article number/ Article number
Artikelnummer
Article number
1
Article number
Filling pressure: 60 bar | Disposable
1
Article number
CONTACT TUBES FOR
ALL SHIELDING GAS WELDERS
1
Article number
15.767.00
4 006825 156157
Packaging unit
Article number/ Article number
Artikelnummer
15.763.11
42.580.85
4 006825 156089
Artikelnummer / Article number
WELDING WIRE: STEEL FOR
ALL SHIELDING GAS WELDERS
WELDING WIRE: STEEL FOR
ALL SHIELDING GAS WELDERS
Ø 0.8 mm | Weight 0.8 kg
Ø 0.8 mm | Weight 5 kg
1
Ø 0.8 mm | Weight 15 kg
1
Article number
15.767.02
4 006825 157000
WELDING WIRE: CrNi FOR
ALL SHIELDING GAS WELDERS
1
Article number
15.763.51
4 006825 156324
WELDING WIRE: ALU FOR
ALL SHIELDING GAS WELDERS
Ø 0.6 mm | Weight 0.6 kg
15.767.20
4 006825 156171
ROD ELECTRODES FOR
ALL ELECTRIC WELDERS
15.767.10
4 006825 156164
ROD ELECTRODES FOR
ALL ELECTRIC WELDERS
FLUX CORED WELDING WIRE FOR
BT-FW 100
4 006825 152272
ROD ELECTRODES FOR
ALL ELECTRIC WELDERS
4 006825 554762
15.917.35
4 006825 506105
4 006825 506112
4 006825 561784
ROD ELECTRODES FOR
ALL ELECTRIC WELDERS
15.911.00
4 006825 152081
ROD ELECTRODES FOR
ALL ELECTRIC WELDERS
Ø 2.5 x 350 mm | 25 pieces
Article number
ROD ELECTRODES FOR
ALL ELECTRIC WELDERS
Ø 3.2 x 350 mm | 115 pieces
1
15.917.39
4 006825 506341
Article number
15.914.20
4 006825 152289
Ø 3.2 x 350 mm | 25 pieces
1
Article number
15.913.12
1
Article number
Ø 2.5 x 350 mm | 175 pieces
15.917.36
Article number
Ø 2.0 x 300 mm + Ø 2.5 x 350 mm | 60 pieces
ROD ELECTRODES FOR
ALL ELECTRIC WELDERS
1
15.762.50
1
Article number
Ø 2.5 x 350 mm | 100 pieces
Ø 1.6 x 250 mm | 25 pieces
ROD ELECTRODES FOR
ALL ELECTRIC WELDERS
1
15.913.20
ROD ELECTRODES FOR
ALL ELECTRIC WELDERS
1
Article number
Ø 2.0 x 300 mm | 100 pieces
1
Article number
4 006825 156072
1
Article number
Ø 2.0 x 300 mm | 25 pieces
15.763.10
Ø 0.9 mm | Weight 0.4 kg
1
Article number
Article number
Ø 0.8 mm | Weight 0.2 kg
1
Article number
WELDING WIRE: STEEL FOR
ALL SHIELDING GAS WELDERS
1
15.915.20
4 006825 152296
Article number
15.917.40
4 006825 506358
33
BENCH DRILL
BENCH DRILL
BENCH DRILL
BT-BD 401
BT-BD 501
BT-BD 701
BT-BD 801 E
230 V ~ 50 Hz
350 W
S2 15 min
n0 = 580 2650 min-1
1.5 - 13 mm
-45° – 45°
104 mm
max. 50 mm
Infinite table height adjustment | Scroll chuck |
Adjustable depth stop for precise drilling | Tilting and pivoting drill table | Drilling spindle with ball bearings
15.4 / 16.4 kg
1
455 x 355 x 235 mm
Article number
Weight net / gross
500 W
S2 15 min
n0 = 280 2350 min-1
1.5 - 16 mm
-45° – 45°
115 mm
max. 50 mm
42.504.20
Infinite table height adjustment | Scroll chuck |
Swiveling scale ring for precise setting of the drill depth |
Tilting and pivoting drill table | Drilling spindle with ball
bearings
19.2 / 20.7 kg
Article number
1
630 W
S2 15 min
n0 = 240 2520 min-1
max. 60 mm
126 mm
Infinite table height adjustment | Scroll chuck | MK2
chuck | Swiveling scale ring for precise setting of the drill
depth | Tilting and pivoting drill table | Vise supplied | Drilling spindle with ball bearings
27.0 / 31.0 kg
42.505.30
Article number
1
550 W
d purchase, 13/
n0 = 450 2500 min-1
max. 80 mm
160 mm
Infinitely adjustable speed control | Quick-change
drill chuck | MK2 chuck | Cross line laser | Incl. digital
display for spindle speed | Adjustable depth stop for precise
drilling | Tilting and pivoting drill table | Pull-out roll base
37.3 / 40.2 kg
1
734 x 500 x 275 mm
42.505.90
4 006825 505023
Packaging unit
230 V ~ 50 Hz
3 - 16 mm -45° – 45°
MK2 to 20 mm
652 x 420 x 260 mm
4 006825 505030
Packing dimensions
230 V ~ 50 Hz
1.5 - 16 mm -45° – 45°
MK2 to 20 mm
510 x 260 x 380 mm
4 006825 505047
34
230 V ~ 50 Hz
G oo
0
201
DK:
BENCH DRILL
Article number
42.507.10
4 006825 546484
BENCH DRILL
BENCH DRILL
BENCH DRILL
BT-BD 1020
BT-BD 1020 D
BT-BD 1625 D
230 V ~ 50 Hz
700 W
S2 15 min
n0 = 210 2500 min-1
3 - 16 mm -45° – 45°
MK2 to 20 mm
169 mm
max. 80 mm
Infinite table heigh adjustment | Quick-change
drill chuck | MK2 chuck | Swiveling scale ring for precise
setting of the drill depth | Tilting and pivoting drill table |
Vise supplied | Drilling spindle with ball bearings
52.5 / 54.5 kg
1
800 x 490 x 295 mm
Article number
400 V ~ 50 Hz
700 W
S2 15 min
n0 = 210 2220 min-1
3 - 16 mm -45° – 45°
MK2 to 20 mm
169 mm
max. 80 mm
Infinite table height adjustment | Quick-change
drill chuck | MK2 chuck | Tilting and pivoting drill table |
Vise supplied | Drilling spindle with ball bearings | Reverse
facility
52.5 / 54.5 kg
1
800 x 490 x 295 mm
42.507.85
4 006825 505009
400 V ~ 50 Hz
700 W
S2 15 min
n0 = 210 2500 min-1
3 - 16 mm -45° – 45°
MK3 to 25 mm
169 mm
max. 80 mm
Infinite table height adjustment | Quick-change
drill chuck | MK3 chuck | Tilting and pivoting drill table |
Vise supplied | Drilling spindle with ball bearings | Reverse
facility
60.0 / 62.0 kg
1
1145 x 465 x 295 mm
Article number
42.507.90
4 006825 505016
Article number
42.512.10
4 006825 504996
DRILL SHARPENER
BENCH GRINDER
BENCH GRINDER
BENCH GRINDER
BT-SH 3/10
BT-BG 150
BT-BG 175
BT-BG 200
230 - 240 V
~ 50 Hz
n0 = 1500 min-1 Angle of tip
55 W
118°
S3 50 % 2 min-1
230 V ~ 50 Hz
150 W
S2 30 min
n0 = 2950 min-1 Ø 150 x Ø 12.7 x
16 mm
230 V ~ 50 Hz
400 W
S2 30 min
n0 = 2800 min-1 Ø 175 x Ø 32 x
25 mm
230 V ~ 50 Hz
400 W
S2 30 min
n0 = 2800 min-1 Ø 200 x Ø 32 x
25 mm
Ø 3 - 10 mm
For twist drills with a diameter of Ø 3 - 10 mm |
Compact construction | Vibration damping feet | Transport
handle
2.1 kg / 2.3 kg
1
200 x 180 x 125 mm
Article number
Adjustable work supports | Safety hoods closed off
at the sides | Sturdy, compact design in metal | Incl. 1 fine
and 1 coarse grinding / sanding wheel | Ball bearing mounted
shaft with zero play | 4 rubber feet to ensure that the
machine stands securely
5.7 / 6.0 kg
1
307 x 180 x 212 mm
42.598.90
4 006825 580167
Article number
Adjustable work supports | Safety hoods closed
off at the sides | Sturdy, compact design in metal | Incl.
1 fine and 1 coarse grinding / sanding wheel | Ball bearing
mounted shaft with zero play | 4 rubber feet to ensure that
the machine stands securely
10.1 / 10.8 kg
1
360 x 260 x 260 mm
44.125.50
4 006825 541182
Article number
Adjustable work supports | Safety hoods closed
off at the sides | Sturdy, compact design in metal | Incl.
1 fine and 1 coarse grinding / sanding wheel | Ball bearing
mounted shaft with zero play | 4 rubber feet to ensure that
the machine stands securely
11.3 / 12.2 kg
1
350 x 250 x 260 mm
44.126.04
4 006825 540260
Article number
44.128.06
4 006825 540277
35
BELT AND DISK SANDER
WET-DRY GRINDER
METAL BAND SAW
METAL ROUTING MACHINE
BT-US 240
BT-WD 150/200
BT-MB 550 U
BT-MR 550
230 V ~ 50 Hz
n0 = 2800 min-1 Ø 150 x Ø 12.7 x
20 mm
240 W
S2 30 min
50 x 686 mm
Adjustable spark guard with large safety goggles |
Adjustable work supports | Safety hoods closed off at the
sides | Sturdy, compact design in metal | Coarse grinding
disc | 4 rubber feet to ensure that the machine stands
securely
7.1 / 8.1 kg
1
400 x 340 x 200 mm
230 V ~ 50 Hz
250 W
S2 30 min
Ø 150 x Ø 20
Ø 200 x Ø 40
Trockenscheibe
n0 = 2950 min-1 n0 = 134 min-1
v: 20 / 30
50 m/min
Adjustable tool support | Sturdy worm gearing for
the wet grinding disc | Slow-speed, fine-grained wet grinding disc | Corrosion-resistant water bath container | RCD
plug for protection of life and health
9.7 / 10.3 kg
1
420 x 260 x 230 mm
Article number
44.661.31
4 006825 541564
Article number
550 W
n0 = 1470 min-1
I: 1640 mm
90°: Ø 110 mm 45°: Ø 65 mm
100 x 130 mm 85 x 60 mm
Base frame with wheels and handle | Clamping
device for workpieces | Automatic limit cut-out | Adjustable
belt guides | Mitre cuts: 0° to 45° | Zero voltage switch |
Suitable for dry cutting
70.4 / 76.8 kg
1
985 x 515 x 465 mm
44.172.15
4 006825 537703
METAL LATHE
230 V ~ 50 Hz
VISE FOR BENCH DRILLS
BT-ML 300
Article number
230 V ~ 50 Hz
350 W
max. 13 mm
MK3
-45° to +45°
0 - 1100 min-1 220 mm | 100 mm
| 280 mm
0 - 2500 min-1
Wheel selector for fine feed | Compound table with
cross slide and longitudinal slide | Depth stop | Electronic
speed control | Two speed ranges (L/H)
50.0 / 68.0 kg
1
540 x 500 x 760 mm
45.042.02
Article number
42.530.02
4 006825 541441
4 006825 541540
REVERSIBLE PLATE CUTTER FOR
BT-MR 550
CARBIDE METAL REVERSIBLE
CUTTING PLATES FOR BT-MR 550
DE: price/performance ”Very Good“
Max. clamping range 75 mm
Ø 30 mm | Cutter 2 pieces
1
1
Article number
230 V ~ 50 Hz
370 W
0 - 1100 min-1
0 - 2500 min-1
l max 300 mm
42.257.06
4 006825 421002
COLLET CHUCK KIT FOR
BT-MR 550
max. Ø 70 mm max. Ø 70 mm Ø 25 - 70 mm
9 pieces | Taper MK 3 |
Inner diameter: Ø 4 / 6 / 8 / 10 / 12 / 14 / 16
1
45.050.04
4 006825 541533
36
Weight net / gross
42.530.23
4 006825 556858
Article number
42.530.24
4 006825 556865
CLAMP CLAW KIT FOR
BT-MR 550
SCHLEIFPAPIER-SET F
SET OF VELCRO GRIND
PAPERS FOR BT-MG 1
1
790 x 360 x 380 mm
Article number
2
Article number
SCHLEIFPAPIER-SET
HIGH SPEED VISEFÜR
FORBT-MG 180/1
SET
OF VELCRO
BT-MR
550 GRINDING / SANDING
PAPERS FOR BT-MG 180/1
Counter-clockwise / clockwise selector switch |
Internally and externally stepped clamp jaws | Centering pin
| Different feed speeds | Automatic feed | Infinitely adjustable speed control
37.0 / 43.0 kg
For indexable insert routing cutter | 2 pieces |
Length 16 mm
Max. clamping range 75 mm | Width 100 mm |
With quick adjust
1
Article number
42.530.21
4 006825 556834
Packing dimensions
42 pieces | Clamping claws | Support trestles |
T-sliding blocks | Stud bolts M10
1
Article number/ Article number
Artikelnummer
42.530.20
42.580.85
4 006825 556827
Packaging unit
Article number
42.530.22
4 006825 556841
Artikelnummer / Article number
LATHE CHISEL KIT FOR
BT-ML 300
SCHLEIFPAPIER-SET
FACE PLATE FOR FÜR BT-MG 180/1
SET
OF VELCRO
BT-ML
300 GRINDING / SANDING
PAPERS FOR BT-MG 180/1
11 pieces | HSS chisels
Ø 125 mm
1
45.050.20
4 006825 556681
LIVE LATHE CENTER FOR
BT-ML 300
1
Article number/ Article number
Artikelnummer
45.050.22
42.580.85
4 006825 556711
SCHLEIFPAPIER-SET
FÜR BT-MG 180/1
FIXED STEADY FOR
SET
OF VELCRO
BT-ML
300 GRINDING / SANDING
PAPERS FOR BT-MG 180/1
Taper MK 2
45.050.24
4 006825 556698
FINE GRINDING WHEEL FOR
BT-BG 150
45.050.21
42.580.85
4 006825 556735
4 006825 505382
FINE GRINDING WHEEL FOR
BT-BG 175
SCHLEIFPAPIER-SET
FÜR BT-MG
FINE GRINDING WHEEL
FOR 180/1
SET
OF VELCRO
GRINDING / SANDING
BT-WD
150/200
PAPERS FOR BT-MG 180/1
1
4 006825 440416
1
Article number/ Article number
Artikelnummer
44.173.00
42.580.85
4 006825 440454
Article number/ Article number
Artikelnummer
44.198.09
42.580.85
Ø 150 x Ø 12.7 mm | Width 20 mm
Ø 150 x Ø 12.7 mm | Width 20 mm
1
44.125.15
42.580.85
4 006825 505399
44.125.12
42.580.85
4 006825 440966
Article number/ Article number
Artikelnummer
44.125.13
42.580.85
SCHLEIFPAPIER-SET
FÜR
BT-MGFOR
180/1
COARSE GRINDING
WHEEL
SET
OF VELCRO
BT-BG
200 GRINDING / SANDING
PAPERS FOR BT-MG 180/1
Ø 175 x Ø 32 mm | Width 25 mm
Ø 200 x Ø 32 mm | Width 25 mm
Ø 200 x Ø 32 mm | Width 25 mm
1
4 006825 440423
Article number/ Article number
Artikelnummer
Artikelnummer / Article number
4 006825 440959
SCHLEIFPAPIER-SET
FÜR BT-MG
FINE GRINDING WHEEL
FOR 180/1
SET
OF VELCRO
BT-BG
200 GRINDING / SANDING
PAPERS FOR BT-MG 180/1
44.126.11
42.580.85
SCHLEIFPAPIER-SET F
SET OF VELCRO GRIND
PAPERS FOR BT-MG 1
1
Article number/ Article number
Artikelnummer
SCHLEIFPAPIER-SET
FÜR
BT-MGFOR
180/1
COARSE GRINDING
WHEEL
SET
OF VELCRO
BT-BG
175 GRINDING / SANDING
PAPERS FOR BT-MG 180/1
Article number/ Article number
Artikelnummer
Artikelnummer / Article number
4 006825 565010
Ø 150 x Ø 12.7 mm | Width 16 mm
Article number/ Article number
Artikelnummer
SCHLEIFPAPIER-SET F
SET OF VELCRO GRIND
PAPERS FOR BT-MG 1
5 pieces | Width / Length 50 x 686 mm | Grit size
2 x 60 / 80 / 1 x 100 K
SCHLEIFPAPIER-SET
FÜR
BT-MGFOR
180/1
COARSE GRINDING
WHEEL
SET
OF VELCRO
GRINDING
/ SANDING
BT-US
240 / BT-WD
150/200
PAPERS FOR BT-MG 180/1
1
44.126.10
SCHLEIFPAPIER-SET
FÜRFOR
BT-MG 180/1
GRINDING BELT KIT
SET
OF VELCRO
BT-US
240 GRINDING / SANDING
PAPERS FOR BT-MG 180/1
SCHLEIFPAPIER-SET
FÜR BT-MG
FINE GRINDING WHEEL
FOR 180/1
SET
OF VELCRO
GRINDING
/ SANDING
BT-US
240 / BT-WD
150/200
PAPERS FOR BT-MG 180/1
Ø 175 x Ø 32 mm | Width 25 mm
Article number
42.580.85
SCHLEIFPAPIER-SET
FÜR
BT-MGFOR
180/1
COARSE GRINDING
WHEEL
SET
OF VELCRO
BT-BG
150 GRINDING / SANDING
PAPERS FOR BT-MG 180/1
1
44.125.14
Artikelnummer / Article number
4 006825 556728
1
Article number/ Article number
Artikelnummer
Ø 150 x Ø 12.7 mm | Width 16 mm
1
45.050.23
42.580.85
Ø 200 x Ø 20 mm | Width 40 mm
1
Article number
Article number/ Article number
Artikelnummer
Max. Ø 30 mm
1
Article number
SCHLEIFPAPIER-SET FÜR BT-MG 180/1
SET OF VELCRO GRINDING / SANDING
PAPERS FOR BT-MG 180/1
Ø 80 mm
1
Article number
SCHLEIFPAPIER-SET
FÜR
BT-MG 180/1
FOUR JAW CHUCK
FOR
SET
OF VELCRO
BT-ML
300 GRINDING / SANDING
PAPERS FOR BT-MG 180/1
SCHLEIFPAPIER-SET F
SET OF VELCRO GRIND
PAPERS FOR BT-MG 1
1
44.128.10
42.580.85
4 006825 440447
Article number/ Article number
Artikelnummer
44.128.11
42.580.85
Artikelnummer / Article number
4 006825 440430
37
ELECTRIC HOIST
ELECTRIC HOIST
ELECTRIC HOIST
ELECTRIC HOIST
BT-EH 250
BT-EH 300
BT-EH 500
BT-EH 600
230 V ~ 50 Hz
500 W
S3 20% 10 min
max. 5.7 m
max. 250 kg
max. 11.5 m
max. 125 kg
Fastening with two bar clips | Operator switch with
emergency stop function | Guide roller with load hook | Motor
with thermal switch | Automatic load securing brake | Load
hook with safety catch | Automatic limit cut-out for rolling out
9.8 / 10.4 kg
2
355 x 240 x 140 mm
Article number
Weight net / gross
550 W
S3 20% 10 min
max. 5.7 m
max. 300 kg
max. 11.5 m
max. 150 kg
Fastening with two bar clips | Operator switch with
emergency stop function | Guide roller with load hook | Motor
with thermal switch | Automatic load securing brake | Load
hook with safety catch | Automatic limit cut-out for rolling out
9.6 / 11.3 kg
2
355 x 230 x 145 mm
22.551.17
4 006825 539714
38
230 V ~ 50 Hz
Article number
900 W
S3 25% 10 min
max. 5.7 m
max. 500 kg
max. 11.5 m
max. 250 kg
Fastening with two bar clips | Operator switch with
emergency stop function | Guide roller with load hook | Motor
with thermal switch | Automatic load securing brake | Load
hook with safety catch | Automatic limit cut-out for rolling out
16.2 / 17.0 kg
2
377 x 157 x 250 mm
22.553.13
4 006825 539721
Packing dimensions
230 V ~ 50 Hz
Article number
1050 W
S3 20% 10 min
max. 5.7 m
max. 600 kg
max. 11.5 m
max. 300 kg
Fastening with two bar clips | Operator switch with
emergency stop function | Guide roller with load hook | Motor
with thermal switch | Automatic load securing brake | Load
hook with safety catch | Automatic limit cut-out for rolling out
17.5 / 18.3 kg
2
400 x 150 x 255 mm
22.555.11
4 006825 539752
Packaging unit
230 V ~ 50 Hz
Article number
22.557.11
4 006825 539769
ELECTRIC HOIST
CHAIN HOIST
BT-EH 1000
BT-CH 1000
SWING ARM GT-SA 1200 FOR
HOISTS
Length 1100 mm | With reach of 750 mm max. load
600 kg | With reach of 1100 mm max. load 300 kg
4
Article number
230 V ~ 50 Hz
1600 W
S3 25% 10 min
max. 5.7 m
max. 999 kg
max. 11.5 m
max. 500 kg
Fastening with two bar clips | Operator switch with
emergency stop function | Guide roller with load hook | Motor
with thermal switch | Automatic load securing brake | Load
hook with safety catch | Automatic limit cut-out for rolling out
29.8 / 33.3 kg
1
570 x 255 x 340 mm
1000 kg
22.553.98
Artikelnummer / Article number
22.553.98
2.5 m
4 006825 540017
Closed metal housing | Load hook with safety catch |
Long operator chain | Low design
8.5 / 9.4 kg
1
250 x 180 x 160 mm
Article number
22.557.15
4 006825 539776
Article number
22.501.02
4 006825 539738
TOOL AND GEAR WAGGON
PALLET TRUCK
HAND TRUCK
BT-TW 150
BT-PT 2500
BT-HT 100
Best Tool 201
2
DE:
DE: price/performance ”Very Good”
max. 150 kg
4 x 45 mm
2 x 100 mm
1 x 200 mm
685 mm (Width) 875 mm (Height)
460 mm (Depth)
max. 2500 kg
1150 mm
Strong sheet steel frame | Non-slip work surface |
7 ball-bearing drawers (fully extendable thanks to telescopic
rails) | 4 large easy-running wheels (of which 2 are steerable with locking brake) | Lockable
54.0 / 57.5 kg
1
730 x 800 x 505 mm
Article number
Folded
700 x 480 x 65 mm
kg
kg
85 mm /
200 mm
Ø 180 mm
Ø 80 mm
550 mm
Selector lever for lift / neutral / lower | Safety
handle with loop grip | Automatic return of the drawbar |
Ball-bearing and PU-coated steering wheels and double
load-bearing rollers
70.0 / 75.0 kg
4 006825 564136
Article number
max. 100 kg
Unfolded
985 x 480 x 420 mm
1
2100 x 560 x 740 mm
45.101.50
kg
Steel frame | Fully retractable rubber wheels | Folding aluminium base plate | Pull-out handle | Rubber-coated
handle | Lock for extending handle
3.7 / 4.4 kg
4
700 x 480 x 65 mm
20.225.25
4 006825 563221
Article number
22.601.13
4 006825 564082
39
40
LOG CUTTING SAW
LOG CUTTING SAW
BT-LC 400/2
BT-LC 700 /1 D
CARBIDE METAL SAW BLADE FOR
BT-LC 400/2
DE: price/performance
”Good – Very Good“
Ø 400 x Ø 30 mm | Teeth 40
1
Article number
230 V ~ 50 Hz
HW / TCT
t = 40
2200 W
S6 40%
n0 = 2860 min-1
HW / TCT
Ø 400 x Ø 30 mm
Ø max. 125 mm
Carbide metal saw blade | Carriage extension |
Carriage with hooks | Length stop
33.1 / 39.1 kg
1
400 V 3 ~
50 Hz
4500 W
S6 20%
CV
t = 64
Ø max. 270 mm
n0 = 1440 min-1
CV
Ø 700 x Ø 30 mm
4 006825 530216
CHROME VANADIUM SAW BLADE
FOR BT-LC 700/1 D
Chrome vanadium sawblade | Ergonomically shaped
carriage with hook | Including chassis | Carriage reset by
springs | Electronic brake switch | Phase converter in plug
87.0 / 152.9 kg
1100 x 745 x 520 mm
45.020.90
1
Ø 700 x Ø 30 mm | Teeth 56
1060 x 760 x 1150 mm
1
Article number
43.071.62
Article number
4 006825 541434
43.071.72
4 006825 541472
Article number
45.020.72
4 006825 548969
LOG SPLITTER
LOG SPLITTER
LOG SPLITTER
LOG SPLITTER
BT-LS 44
BT-LS 65 U
BT-LS 610 B
BT-LS 810 DB
230 V ~ 50 Hz
1500 W
230 V ~ 50 Hz
2200 W
Ø max. 50 320 mm
5.5 t
390 mm
6t
470 mm
3.8 l
DE: price/performance ”Good“
DE: rating ”Good“
• Urteil
Einhell BT-LS 44
230 V ~ 50 Hz
1500 W
4t
310 mm
GUT
83,0 %
Holzspalter im Einzeltest
09/2011
Ø 50 - 250 mm max. 370 mm
2.4 l
Two-hand control | Transport handle | Stable foot |
High quality electric motor | Overload release | Sturdy
wheels
36.0 / 38.7 kg
1
810 x 290 x 468 mm
Article number
Ø 50 - 250 mm max. 520 mm
3.2 l
Two-hand control | Transport handle | Base frame |
High quality electric motor | Overload release | Sturdy
wheels
48.0 / 52.0 kg
1
1090 x 330 x 565 mm
34.320.13
4 006825 540062
Article number
max. 100 1040 mm
Adjustable log holding plates | Height-adjustable
workbench | Two-handed safety switch | Emergency stop
switch | Adjustable splitting wedge height | Transport handle and wheels
83.0 / 97.6 kg
1
535 x 535 x 1160 mm
34.321.60
4 006825 554526
Article number
400 V 3 ~
50 Hz
3600 W
Ø max. 50 400 mm
8t
480 mm
4l
100 - 1040 mm
Adjustable log holding plates | Height-adjustable
workbench | Two-handed safety switch | Emergency stop
switch | Adjustable splitting wedge height | Transport handle and wheels
101.0 / 112.8 kg
1
560 x 560 x 1140 mm
34.320.45
4 006825 576856
Article number
34.320.65
4 006825 576863
41
GENERATOR
GENERATOR
GENERATOR
GENERATOR
BT-PG 750
BT-PG 850
BT-PG 2000
BT-PG 2800
230 V ~ 50 Hz 1.5 kW (2 PS)
650 W
63 cm3
(max. 720 W)
2.7 l
Mixture 1 : 50
(2 %)
2-stroke engine | Synchronous generator | Crank
shaft mounted at two ends | Overload switch | Automatic
voltage controller (AVR) | Reversing starter to start the
machine
18.6 / 21.3 kg
1
472 x 372 x 420 mm
Article number
Weight net / gross
0,95 kW
(1,3 PS)
63 cm3
4.2 l
Mixture 1 : 50
(2 %)
Powerful 2-stroke engine, air-cooled | Synchronous
generator | Carry handle for easy transport | Overload switch
for appliance safety | Automatic voltage controller (AVR) |
Reversing starter to start the machine
16.6 / 18.0 kg
1
404 x 367 x 347 mm
41.512.42
4 006825 547528
42
230 V ~ 50 Hz
650 W
(max. 720 W)
Article number
3,74 kW
(5 PS)
196 cm3
15 l
Petrol
4-stroke engine | Synchronous generator | Voltmeter | Tank indicator | Large 15 liter tank for continuous
operation | Overload switch | Low oil guard | Crank shaft
mounted at two ends | Automatic voltage controller
(AVR)
38.5 / 41.5 kg
1
635 x 470 x 485 mm
41.512.25
4 006825 547221
Packing dimensions
2 x 230 V ~ 50 Hz
2000 W
(max. 2200 W)
Article number
4,1 kW
(5,6 PS)
208 cm3
15 l
Petrol
4-stroke engine | Synchronous generator | Practical
voltmeter | Tank indicator | Large 15 liter tank for continuous
operation | Overload switch | Low oil guard | Crank shaft
mounted at two ends | Automatic voltage controller (AVR)
45.0 / 48.0 kg
1
635 x 470 x 480 mm
41.523.73
4 006825 541083
Packaging unit
2 x 230 V ~ 50 Hz
2600 W
(max. 2800 W)
Article number
41.524.00
4 006825 563283
GENERATOR
GENERATOR
GENERATOR
BT-PG 4000
BT-PG 5500 D
BT-PG 5000 DD
2 x 230 V ~ 50 Hz 4.89 kW /
3500 W
(6.7 PS)
(max. 3800 W)
24 l
Petrol
400 V 3 ~ 50 Hz 2 x 230 V ~ 50 Hz
3000 W
3000/3600 W
(max. 5500 W) (max. 3300 W)
7.2 kW
(9.8 PS)
25 l
3000 W
1 x 12 V d.c.
400 V 3 ~ 50 Hz
(max. 3300 W) (max. 100 W)
4200 W
(max. 5000 W)
16 l
Petrol
4-stroke engine | Practical voltmeter | Tank indicator | Large 24 liter tank for continuous operation | Overload
switch | Low oil guard | Crank shaft mounted at two ends |
Automatic voltage controller (AVR)
64.0 / 68.0 kg
1
4-stroke engine | Synchronous generator | Overload
switch | Low oil guard | Crank shaft mounted at two ends |
Automatic voltage controller (AVR)
77.0 kg | 81.8 kg
714 x 560 x 623 mm
1
700 x 595 x 625 mm
6.3 kW
(8.6 PS)
Diesel
PETROL AND OIL SUCTION PUMP
4-stroke digital inverter, air-cooled | Inverter
technology for voltage-sensitive equipment (computers,
measuring devices) | Voltage stability without fluctuations
| Low oil guard | Overload switch | Automatic voltage controller (AVR)
144.0 / 157.9 kg
1
Suction hose lenghth 1.3 m | Volume 1.6 l max.
950 x 580 x 840 mm
230 V ~ 50 Hz 230 V / 16 A
Article number
41.524.40
4 006825 580051
Article number
41.523.36
4 006825 587135
Article number
41.523.95
4 006825 585193
Article number
34.070.00
4 006825 547276
GENERATOR
BT-PG 900
1x 230 V ~ 1 x 12 V d.c.
900 W
(max. 70 W)
(max. 1000 W)
1.04 kW /
1.4 PS
53 cm3
2.7 l
Petrol
4-stroke digital inverter, air-cooled | Inverter technology for voltage-sensitive equipment (computers, measuring devices) | Voltage stability without fluctuations | Low
oil guard | Overload switch | Automatic voltage controller
(AVR)
12.1 / 14.0 kg
1
490 x 440 x 280 mm
Article number
41.512.50
4 006825 549720
Weight net / gross
Note: For safe handling of the products please refer to the instructions in the operating manual.
Packing dimensions
Packaging unit
43
GB
We can help!
Have any questions on our products?
Want to order a spare part?
Your product no longer works as well as when you first
bought it?
Contact us!
We will be glad to offer quick and unbureaucratic help.
iSC GmbH, Eschenstr. 6,
94405 Landau/Isar, Germany
(Landline charge 14 cent / min.)
(Mobil phone charge 42 cent / min.)
+ 49 (0) 1805 12 05 09
(Landline charge 14 cent / min.)
(Mobil phone charge 42 cent / min.)
+ 49 (0) 1805 83 58 30
www
isc-gmbh.info
Einhell Germany AG
Wiesenweg 22
94405 Landau/Isar
Germany
© 2013 Einhell Germany AG
Subject to technical changes
and errors
www.einhell.com
info@einhell.com
Art. no.
Date of issue
110158
04.2013
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising