Request for Quote for BTV Tender for Supply, Installation

Request for Quote for BTV Tender for Supply, Installation
TELECOMMUNICATIONS CONSULTANTS INDIA LIMITED
(A GOVERNMENT OF INDIA ENTERPRISE)
TENDER NO: TCIL/TS/BTV-ES/10/2012/1
Request for Quote for BTV Tender for
Supply, Installation, Testing and Commissioning (SITC) of Digital
Satellite Earth Station and Allied Equipments
OCTOBER 2012
Sub: Request for Quotation for BTV Tender for Supply, Installation, Testing and
Commissioning (SITC) of Digital Satellite Earth Station and Allied Equipment on
Turn-Key Basis for Bangladesh Television (BTV).
Telecommunications Consultants India Limited (TCIL) is an ISO - 9001:2000 certified public
sector undertaking under Ministry of Communication and IT, Govt. of India in the field of
Telecommunications, Information Technology and Civil Infrastructure. TCIL is a world-reputed
organization which has been working in India and aboard for last three decades to the best
satisfaction of its clients, and is known world-over for its inherent strengths in executing turnkey
projects and rendering consultancy services.
TCIL intends to participate, along with eligible OEMs, in a tender floated by Bangladesh
Television (BTV) for Supply, Installation, Testing and Commissioning (SITC) of Digital Satellite
Earth Station and Allied Equipment on Turn-Key Basis. The broad scope of work includes but
not limited to
•
Selected OEM shall provide the following services:
o Supply of equipments
o Installation, Testing and Commissioning of the equipments (Optional)
o Factory / pre-shipment inspection for Five persons
o One week On site training for Six Engineers
o Two weeks Factory training for Six Engineers
•
Total completion time for Supply of the offered equipments shall be 1 month. Any delay
in the delivery of goods and related services shall attract a deduction from the Contract
Price, as liquidated damages. The applicable rate for liquidated damages for delay shall
be: 0.5% of the Contract Price of the delayed Goods or unperformed Related services
for each week of delay until actual delivery or performance. The maximum amount of
liquidated damages shall be: Ten (10%) percent of the Contract Price.
•
The quotes for supply shall be submitted covering all the items as mentioned in the
Schedule of requirement and technical specification attached herewith. Installation
Materials including patch panels, cables, connectors and all required accessories; Local
wiring and cabling necessary required for purposed workflow.
•
The OEM shall provide a guarantee for after sales service support and supply of spare
parts for a period of 7 years from the date of termination of warranty period.
•
The OEM shall provide Factory and Onsite training for TCIL & BTV personnel. Training
Charges shall be quoted separately. Charges for Installation and Commissioning of the
delivered system shall be quoted separately as optional. Selected OEM shall provide
technical support to TCIL during installation and provide onsite support during
commissioning of the system. The quote for rendering the above services shall be
provided separately as optional.
The prices shall be quoted in US$ valid upto 120 days. Prices to be quoted on CIF Chittagong,
Bangladesh basis.
The prices shall be inclusive of warranty for a period of 12 months from the date of issuance of
final acceptance by BTV.
The quotes shall be submitted along with the following:
• Documentary evidence citing minimum five years of experience in the related goods &
services.
• Documentary evidence citing minimum supply and/or production capacity of goods as
US$ 8,00,000/- only per year for last five years.
• A clause by clause compliance of the technical specifications attached herewith shall
also be submitted along with the offer.
• Country of Origin declaration for the offered product to establish the eligibility of goods &
related services. Goods or related services from ‘Israel’ are not eligible.
• Detailed description of the technical and performance characteristics of the offered
Goods, alongwith technical layout drawings, product brochures and datasheets
• A letter authorizing TCIL to bid on manufacturer’s behalf. Format of the letter is attached
herewith.
• List of recommended spares
Payment to the selected OEM shall be made through an irrevocable letter of credit on back to
back basis. The original Payment Terms are attached herewith.
The quotes shall reach TCIL on or before 25.10.2012 in hard copy or electronically at the
following address.
E.M. Venkatesh
General Manager (TS)
Telecommunications Consultants India Limited,
5th Floor, TCIL Bhawan, Greater Kailash – I,
New Delhi - 110048
Tel: +91 11 2620 2590
Fax: +91 11 26242266
Mob: 98 68 393 793
e-mail: em.venkatesh@tcil-india.com
Alternate Address:
Rajat Verma
Assistant Manager (TS)
Telecommunications Consultants India Limited,
5th Floor, TCIL Bhawan, Greater Kailash – I,
New Delhi - 110048
Tel: +91 11 2620 2515
Mob: 99 10 79 78 01
e-mail: rajatverma@tcil-india.com
Price Schedule for Goods
[Group B Tenders: Goods Manufactured outside Bangladesh, to be imported]
Item
No.
Description of Item
Country of
Origin
Unit of
Measurement
Quantity
Unit Price CPT
(Hazrat Shajalal
International air
port, Dhaka)
(USD)
1
2
3
4
5
6
EARTH STATION EQUIPMENT
01.
a.
06.
07.
08.
09.
10.
Antenna System
Min. 4.8 meter Antenna with kingpost
pedestal and all other accessories
2 port Transmit/Receive Feed
MPEG-4 Encoding 1+1 with Auto
Redundancy
DVB-S2 Modulator 1+1 with Auto
Redundancy
70 MHz to C band Up-converter 1+1 with
Auto Redundancy Controller
400 Watt TWT Power Amplifier 1+1 with
Auto Redundancy Controller
Test loop Translator
LNB System min. 25°K (PLL)
Professional IRD
7 GHz RF Spectrum Analyzer
Equipment Racks and Console
11.
12.
Wave guide
De-Hydrator
b.
02.
03.
04
05.
1 set
1 set
1 set
1 set
1 set
1 set
1 set
3 sets
4 sets
1 set
As per
requirement
20 meter
1 pc
RELATED SERVICES FOR EARTH STATION EQUIPMENT
01.
Installation materials
02.
Services: (a) Installation, Testing and
Commissioning (b) Pre-shipment inspection
and training
As per
requirement
As per
requirement
CPT
Price per
Line Item
(Col. 5 × 6)
(USD)
7
TELEVISION RECEIVE ONLY (TVRO)
01.
02.
03.
04.
05.
06.
Min. 3.7 meter TVRO Antenna System
Feed Horn
LNB System min. 25°K (PLL)
Professional IRD
Installation Materials
Commissioning of TVRO system
20 sets
20 sets
40 sets
40 sets
As per requirement
SATELLITE EARTH STATION CONTROL ROOM
01.
02.
03.
16X2 Video router with embedded audio
Auto Loudness control
Minimum 17" LED monitor
1 Pc.
1 Pc.
2 Pc
MANDATORY SPARE UNIT
01.
02.
03.
04.
MPEG-4 Encoder
DVB-S2 modulator
70 MHz to C-Band Up-converter
400 Watt TWT Power Amplifier
1 Pc.
1 Pc.
1 Pc.
1 Pc.
Note : Price offered in foreign currency (USD)
Total Price:
Point of Delivery as per Schedule of Requirement:
Period of Delivery as per Schedule of Requirement :
Name:
[insert full name of signatory]
Signature with Date and Seal
In the capacity of:
[insert designation of signatory]
[ Sign]
Duly authorized to sign the Tender for and on behalf of the Tenderer
Price and Completion Schedule - Related Services
[Group B Tenders: Goods Manufactured outside Bangladesh, to be imported]
Service
No.
Description of Item
Country
of
Origin
Unit of
Measurement
Quantity
1
01.
2
Installation, Testing and
Commissioning
On site training for 06 (six)
Engineers for 01(One )
Week
Factory training for 06 (six)
Engineers for 02(Two )
Weeks
3
4
Bulk
5
1 Lot
Number
06 (six)
Engineers for
01(One ) Week
Number
06 (six)
Engineers for
02(Two )
Weeks
05(five)
Persons
02.
03.
04.
Pre-Shipment Inspection
Number
Unit Price CPT
(Hazrat
Shajalal
International
air port,
Dhaka)
(USD)
6
CPT
price per
Line Item
(Col. 5 × 6)
(USD)
7
Note : Price offered in foreign currency (USD)
Total Price:
Point of Delivery as per Schedule of Requirement:
Period of Delivery as per Schedule of Requirement :
Name:
[insert full name of signatory]
Signature with Date and Seal
In the capacity of:
[insert designation of signatory]
[ Sign]
Duly authorised to sign the Tender for and on behalf of the Tenderer
Specifications Submission and Compliance Sheet (Form PG4-4)
Item
No.
Name of Goods
or Related Service
1
2
Country of Origin
Make and Model
(when applicable)
Full Technical Specifications
and Standards
3
4
5
FOR GOODS
Note 1
FOR RELATED SERVICES
[The Tenderer should complete all the columns as required]
Signature:
[insert signature of authorised representative of the
Tenderer]
Name:
[insert full name of signatory]
In the capacity of:
[insert designation of signatory]
Duly authorised to sign the Tender for and on behalf of the Tenderer
Manufacturer’s Authorisation Letter
[The Tenderer shall require the Manufacturer to fill in this Form in accordance with the instructions indicated. This
letter of authorization should be on the letterhead of the Manufacturer and should be signed by a person with the
proper authority to sign documents that are binding on the Manufacturer.
Invitation for Tender No: 268-12
Date: .....................
Tender Package No: Single
Tender Lot No: 01 (One)
To:
Director General,
Bangladesh Television,
Television Bhaban, Rampura,
Dhaka-1219, Bangladesh.
Tel : 88-02-9334110, Fax : 88-02-8312927,
e-mail : dgbtv@yahoo.com,
website : www.btv.gov.bd
WHEREAS
We [insert complete name of Manufacturer],
who are official manufacturers of [insert type of goods manufactured], having factories at [insert full address of
Manufacturer’s factories], do hereby
authorize [insert complete name of Tenderer] to supply the following Goods, manufactured by us [insert name and
or brief description of the Goods].
We hereby extend our full guarantee and warranty as stated under GCC Clause 33 of the General Conditions of
Contract, with respect to the Goods offered by the above Tenderer.
Signed: [insert signature(s) of authorized representative(s) of the Manufacturer]
Name: [insert complete name(s) of authorized representative(s) of the Manufacturer]
Address: [insert full address including Fax , e-mail and web site address ]
Title: [insert title]
Date: [insert date of signing]
Schedule of Requirements
A.
List of Goods and Delivery Schedule
When completing Form PG4-3A & 3D the Tenderer shall quote prices and contract delivery dates for each lot separately,
as specified in the List of Goods and Delivery Schedule.
Item
No.
Description of Item
Unit of
Measurement
Quantity
Point of
Delivery
1
2
3
4
5
Delivery
Date
Required
(in months)
01.
a.
b.
02.
03.
04
05.
06.
07.
08.
09.
10.
11.
12.
EARTH STATION EQUIPMENT
Antenna System
Min. 4.8 meter Antenna with kingpost pedestal and all
other accessories
2 port Transmit/Receive Feed
MPEG-4 Encoding 1+1 with Auto Redundancy
DVB-S2 Modulator 1+1 with Auto Redundancy
70 MHz to C band Up-converter 1+1 with Auto
Redundancy Controller
400 Watt TWT Power Amplifier 1+1 with Auto
Redundancy Controller
Test loop Translator
LNB System min. 25°K (PLL)
Professional IRD
7 GHz RF Spectrum Analyzer
Equipment Racks and Console
Wave guide
De-Hydrator
RELATED SERVICES FOR EARTH STATION EQUIPMENT
Installation materials
Services: (a) Installation, Testing and Commissioning
(b) Pre-shipment inspection and training
TELEVISION RECEIVE ONLY (TVRO)
Min. 3.7 meter TVRO Antenna System
Feed Horn
LNB System min. 25°K (PLL)
Professional IRD
Installation Materials
Commissioning of TVRO system
SATELLITE EARTH STATION CONTROL ROOM
16X2 Video router with embedded audio
Auto Loudness control
Minimum 17" LED monitor
MANDATORY SPARE UNIT
MPEG-4 Encoder
DVB-S2 modulator
70 MHz to C-Band Up-converter
400 Watt TWT Power Amplifier
1 set
1 sets
1 sets
1 set
1 set
1 set
1 set
3 sets
4 sets
1 set
As per requirement
20 meter
1 pc
As per requirement
As per requirement
20 sets
20 sets
40 sets
40 sets
As per requirement
1 Pc.
1 Pc.
2 Pc
1 Pc.
1 Pc.
1 Pc.
1 Pc.
6
B.
List of Related Services and Completion Schedule
When completing Form PG4-3D, the Tenderer shall quote prices and Completion date for services for each item against
each lot
Item
No.
Description of Item
Unit of
Measurement
Quantity
1
2
3
4
1
Installation, Testing and
Commissioning
Place where
Services shall be
performed
5
Final Completion
Date(s) of Services
6
Bangladesh
[insert required
Television,
Completion Date(s)
Chittagong Center
Number
06 (six)
2
On site training for 06
Bangladesh
Engineers for
(six) Engineers for 01
Television,
01(One
)
Week
(One) Week
Chittagong Center
Number
06 (six)
3
Factory training for 06
Manufacturer’s /
Engineers
for
Integrator’s
(six) Engineers for
02(Two )
Premesis
02(Two ) Weeks
Weeks
(Location & Address
to be mentioned by
Tenderer)
Number
4
Pre-Shipment
05(five)
Manufacturer’s /
Persons
Integrator’s
Inspection
warehouse
(Location & Address
to be mentioned by
Tenderer)
Lot No 1: Supply, Installation, Testing and Commissioning of Digital Satellite Earth Station and Allied Equipment on
Turn-Key Basis.
[add as many rows and details as there are individual items in the Lot]
Bulk
1 Lot
Notes on Related Services
The Purchaser shall clearly specify the related services/Incidental services, other than inland transportation and
other services required to convey the Goods to their final destination, in this Schedule of requirement. In particular,
these services may refer to any of the following but not limited to:
performance or supervision of on-site assembly and/or start-up of the supplied Goods;
performance or supervision or maintenance and/or repair of the supplied Goods, for a period of time as
specified, provided that this service shall not relieve the Supplier of any warranty obligations under this
Contract; and
training of the Purchaser’s personnel, at the Supplier’s plant and/or on-site, in assembly, start-up, operation,
maintenance, and/or repair of the supplied Goods
(a)
(b)
Technical Specifications
All the equipment proposed to supply should comply with the Technical Specifications stated for individual
equipment. Equipment shall also comply with Digital and Analog TV Broadcast standard set by ITU and EBU. BTV’s
current requirements for equipment are Standard Definition (SD) but all offered equipment shall be upgradable to
High Definition (HD) without changing any hardware.
EARTH STATION EQUIPMENT
Technical Specification
Sl. No
Description of Item
Specification
Compliance statement
by the Tender
1
01.
a.
i.
ii.
iii.
iv.
v.
vi.
2
3
ANTENNA SYSTEM
Model : Make: Origin:
Antenna sub-system : The Antenna system should have Intelsat approval license
Mechanical
Standard
Intelsat F-1 Standard
Mount Type
EL over AZ
Main reflector Diameter
Minimum 4.8 meter
Antenna pointing Travel
Azimuth, Continuous 120° in two 60°. Elevation, between 10°
to 90°.
Deformation shall not be induced by Earth quake having an
Seismic performance
acceleration of 0.3 g in horizontal and 0.15g in vertical direction.
up to 82.2 meters/sec (gust)
vii.
Wind Survival at stow
position
Wave guide
viii.
Weight
ix.
Foundation Design of
Antenna System.
Electrical
Transmit Frequency
Receive Frequency
Antenna efficiency
Antenna gain (minimum)
a. Weight of the Antenna in Kg.
b. Weight of the Antenna must in Kg.
All Engineering details of the foundation design should be
provided accordingly as required.
i.
ii.
iii.
iv.
v.
vi.
Antenna Noise
Temperature
Radiation pattern
maximum loss (recommended ≤0.2 dB/m) and will enable to
withstand, risk free, the required power to transmit the required
EIRP.
5.850 GHz to 6.425 GHz
3.625 GHz to 4.200 GHz
≥ 0.55 in transmit and receive bands
a. Transmitting 48 dBi
b. Receiving
44 dBi
a. 10° Elevation 60° K (typical)
b. 40° Elevation 45° K (typical)
Antenna radiation pattern should conform to the Satellite system
available in orbital position in 70 deg. East to 110 deg. East.
vii.
Mandatory Requirements :
Transmit and receive side lobe
level
b.
i.
Two Port Transmit / Receive Feed
Polarization
2-port Tx-Rx feed Linear polarized feed. Manually adjustable
for polarization change from H to V and vice versa.
Cross polar isolation
Minimum 27 dB linear
Transmit Reject Filter
Insertion Loss
0.25dB max
Input/Output VSWR
More than 1.25:1
Pass Band
3.625 to 4.20 GHz
ii.
c.
i.
ii.
iii.
As recommended by the Satellite operator for the Earth
Station.
4
iv.
v.
d.
e.
Reject Band
Port to port isolation
Power handling capability
Receive system G/T dB/K
5.850 GHz to 6.425 GHz
< -40 dB
More than 3KW on each transmit port
The Antenna, together with LNB sub-system shall satisfy
system G/T minimum 21 (in the clear sky)
Sl. No
02.
Description of Item
Specification
MPEG-4 ENCODING SYSTEM WITH 1+1 AUTO REDUNDANCY
Model : Make: Origin:
Should have capacity to upgrade HD format without changing any
General Feature :
hardware.Enables an additional SD MPEG-2 encoder to allow
simultaneous encoding of the SD input with both MPEG-2 and MPEG-4
AVC.
i.
a.
b.
ii.
iii.
iv.
v.
vi.
Video Input
Analog
Digital
Video Processing
Video Data Rates
Connector type
Input Level
Audio Input
vii.
viii.
ix.
x.
xi.
Audio Processing
Output rates
Studio Reference signal
Transport stream
Output
Scrambling
Composite analog video signal (PAL B) as per ITU-BT 470-4 PAL-B
Digital video signal (SDI) as per ITU-R Rec BT 656-1
MPEG-4
0.5 to 10 Mbit/s for Main Profile
BNC 75 Ω
1 V p-p ±5 %, 75 Ω
Two stereo or four independent analog mono channels on XLR
600 Ω balanced connectors.
MPEG 1 Layer II Audio encoding standard
32-384 kb/s
625 line H –sync or black-burst
ASI output.
Supports Basic interoperability scrambling system (BISS) Modes 0, 1 and
Mode E for encrypted session words (as defined in EBU Tech 3292).
xii.
Control access
Front panel and through Web browser.
xiii.
Power input
220 VAC, 50 Hz
xiv.
Redundancy control
03.
i.
ii.
iii.
iv.
v.
vi
vii.
viii.
ix.
x.
a.
b.
c.
xi.
Capable to of switching automatically between two ASI stream,
from two encoder when there is a signal loss in one encoder.
DVB MODULATOR WITH 1+1 AUTO REDUNDANCY
Model : Make: Origin:
General Feature
Capable of modulating both DVB-S and DVB-S2 signals.
The modulator shall be locked to input signal by clock derived
from the input signal.
Selectable from front
Pure/Modulated carrier, Normal/Inverted spectrum
panel
Modulation
DVB-S mode: QPSK
DVB-S2 mode: QPSK and 8PSK
Symbol rate
Variable symbol rate for different operations: 1 Msym/s to 20
Msym/s
Spectrum Roll-off
User selectable: 20%, 25%, 30%, 35%
factor:
FEC
Various
Output Frequency
IF output, ranging from 50 to 180 MHz
Power spectrum
Approved for Satellite Transmission
Front panel control
Carrier On/Off, Modulation On/Off.
Output Signal
Power
-20 dBm to +5 dBm (0.1 dB steps)
Output Power Stability: ±0.5 dB
Connector
BNC 75 Ω
Monitor Output
-20 dB nominal relative to Main IF output power, BNC 75 Ω
Technical Specification
Compliance statement
by the Tender
xii.
Alarm
xiii.
xiv.
Control access
Redundancy Controller
Sl. No
04.
a. Carrier fail
b. Modulation fail
Front panel and through Web browser.
Auto Redundancy controller must be installed at the modulator
to select modulator output independently.
Description of Item
Specification
i.
ii.
iii.
iv.
v.
vi.
vii.
70 MHZ TO C BAND UP-CONVERTER WITH 1+1 AUTO REDUNDANCY;
Model : Make: Origin:
IF input frequency
70 MHz or 140 MHz
Output frequency Range
5.850 to 6.425 GHz
Frequency Step
Synthesized in 125 KHz steps
Frequency Accuracy
±100 Hz, normal 25°C
Frequency Stability
±500 Hz, over temperature range
Input Power level
-10 dBm normal, 0 dBm max
Output Power Level
+12 dBm at P1 dB
viii.
ix.
x.
xi.
xii.
xiii.
xiv.
xv.
Gain
Spurious Modulated Noise
Group delay Variation
SSB phase Noise
Input return Loss
Output return Loss
Power
Redundancy Controller
05.
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
ix
x.
xi.
xii.
xiii.
xiv.
xv.
xvi.
xvii.
xviii.
xix.
06 .
i.
ii.
iii.
Minimum +20 dB
- 60 dBc
Maximum ±0.03 ns/MHz
Same or better than IESS308
Maximum 10 dB @ 50Ω
Maximum 18 dB @ 50Ω
220 VAC, 50Hz
Auto Redundancy controller for Output.
400 WATT TWT POWER AMPLIFIER WITH 1+1 AUTO REDUNDANCY;
Model : Make: Origin:
Type
400 Watt C-band TWT
Frequency Range (GHz)
5.850 to 6.425 GHz
Output Power at Flange
Minimum 350 Watt
Gain flatness
±1.0 dB max (500 MHz)
Gain Variation with
± 0.5 dB (-10° to 25° C)
temperature
Power output stability
± 0.5 dB (under constant temperature)
Gain Slope
0.02 dB/36 MHz
Gain at rated power
80 dB (typical)
Gain Control
30 dB in steps in 1 dB.
Input level
-30 dB±10 dB (typical)
Max input level withoutdamage +15 dBm
Gain stability
±0.25 dB over 24 hours
Inter-modulation
-18 dBc max
Harmonic Output
-60 dBc max
Group delay (Linear)
0.01 ns/Mhz
VSWR Input/Output
1.3:1 (max)
Power
230 VAC, 50 Hz
Cooling
Forced Air
Redundancy Controller : Separate Auto Redundancy controller for HPA output to wave guide output
& dummy load. A dummy load with appropriate power should be added in the chain.
TEST LOOP TRANSLATOR (TLT)
Model : Make: Origin:
Input Frequency
Output Frequency
Input Level
5.850 to 6.425 GHz
3.625 to 4.20 GHz
+10 dBm Maximum
Technical Specification
Compliance statement
by the Tender
iv.
v.
07.
i
ii.
iii.
iv.
Output Level
Power input
-25 dBm Maximum
220 VAC, 50 Hz
LNB SYSTEM 25°K (PLL)
Model : Make: Origin:
The characteristics of LNB must comply with the need both technical and environmental conditions of
the reception.
Input frequency range
3.625 GHz to 4.200 GHz
Output frequency range
950 to 2150 MHz
Gain
60 dB (typical)
Noise Temperature
25° K (typical)
Sl. No
08.
i.
ii.
iii..
iv.
v.
vi.
vii.
viii.
ix.
x.
xi
xii.
xiii.
09.
i
ii.
iii.
iv.
v.
vi.
vii.
viii.
ix.
x.
10.
11.
12.
i.
ii.
iii.
Description of Item
Specification
PROFESSIONAL IRD (DVB-S AND DVB-S2 COMPLIANT)
Model : Make: Origin:
Satellite receiver must be 19" rack mountable and having the followinga. DVB-S QPSK and DVB-S2 QPSK, 8PSK demodulation
b. Video output analog (CCVS) and digital (SDI)
c. Audio output analog 600 Ω balanced
d. Basic interoperability scrambling system (BISS) Mode 1&0
e. Summery alarm and Front panel audio and video monitoring
Input
2 L-band input available
Input Frequency
950 to 2150 MHz
Connector
F-type BNC 75 Ω
Supported profile
a. For MPEG 2 - MP@ML, MP@HL
b. For MPEG 4 - MP@L3, HP@L4
Decoding
a. MPEG-2 SD
b. MPEG-2 HD Down-conversion as SD on SDI or CVBS output
c. MPEG-4 AVC SD Decoding
d. MPEG-4 AVC HD Down-conversion as SD on SDI or CCVS output
Symbol rate
Min. 1 to 15 Msym/s
FEC rate
a. QPSK - 1/2, 2/3, 3/4, 5/6, 7/8
b. 8PSK - 3/5, 2/3, 3/4, 5/6, 8/9, 9/10
Analog Video Out
Composite PAL-B
ASI output
Min. 1
Digital Video out
Digital Serial Rec. BT656-1
Audio out
2 stereo pairs MPEG 1 layer II analog audio XLR
2 stereo pairs AES/EBU digital audio XLR type
Power
220 VAC, 50 Hz
b. Surge protection, 5 KV Typical
IRD Control
All controls on front panel and through web browsing.
RF SPECTRUM ANALYZER
Model : Make: Origin:
Input frequency range
9 KHz to 7 GHz
Frequency Span: a. Range
0 Hz (Zero span), 100Hz to the Max. frequency
b. Resolution
2 Hz x N4
Sweep time: a. Accuracy
±1%
b. Sweep trigger
Free run, Single, Line, Video, External
Resolution Bandwidth
1 Khz to 5 MHz (-3dB) 1-3-10 sequence.
Video Bandwidth
30 Hz to 3 MHz
Input attenuator
0 dB to 70 dB in 10 dB steps.
Frequency display
With marker of frequency counter.
Display Scale
Log and linear
Display screen
Min. 21 cm TFT colour display.
Resolution
640 X 480 pixel (VGA resolution)
EQUIPMENT RACKS AND CONSOLE;
As per requirement of the system.
WAVE GUIDE
Model : Make: Origin:
HELIAX® Premium Elliptical Waveguide for C-band, 5.725–6.425 GHz, black PE jacket
DE-HYDRATOR
Model : Make: Origin:
General Feature
a. 19” rack mountable. b. 3.0–5.0 psig.
Dehydrator Type
Desiccant
Volume Capacity
Maximum 283.17 L | 10.00 ft ³
Technical Specification
Compliance statement
by the Tender
iv
v.
vi
vii
viii.
Dew point
Flow rate
Excess run:
Alarm
Power input
36 °c (33°f)
0.05 scfm | 1.40 slpm
Alarm 10 minutes
Loss of input power
220 VAC, 50 Hz
TVRO EQUIPMENT
TVRO Antenna system should have Feed Horn and LNB.
Sl. No
Description of Item
Specification
01.
i.
ii.
iii.
iv.
v.
vi.
vii.
viii.
ix.
x.
xi.
xii.
02.
i.
ii.
iii.
iv.
v.
03.
i.
ii.
iii.
04.
iv.
iii.
v.
i.
ii.
ANTENNA SYSTEM:
Model : Make: Origin:
Standard
Frequency
Mid-band Gain
Cross polarization
Beam width (- 3 dB)
Main reflector Diameter
Azimuth Travel
Elevation Travel
Polarization Travel
Wind Load
Total Antenna System Weight
Foundation Design
C-Band, Prime focus, galvanized solid reflector
3.625 GHz to 4.200 GHz
Min. 41.0 dBi
> 35 dB
1.70°
Not less than 3.7 meter
360° continuous (AZ-EI)
0° to 90°
±90°
Minimum 125 Mph
In Kg
All engineering details of the foundation design should be
provided.
FEED HORN
Model : Make: Origin:
Type
Frequency Range
F/D Range
Isolation
Return Loss
C-Band Feed-horn
3.625 to 4.2 GHz
0.33 to 0.45
>10 dB
>10 dB.
LNB SYSTEM 25ºK (PLL)
Model : Make: Origin:
Input frequency range
Output frequency range
Gain
PROFESSIONAL IRD
3.625 GHz to 4.200 GHz
950 to 2150 MHz
60dB (typical)
Model : Make: Origin:
Satellite receiver having the followinga. DVB-S QPSK and DVB-S2 QPSK, 8PSK demodulation
b. Video output analog (CCBS) and digital (SDI)
c. Audio output analog 600 Ω balanced
d. Basic interoperability scrambling system (BISS) Mode 1&0
e. Summery alarm and Front panel audio and video monitoring
Input
2 L-band input available
Input Frequency
950 to 2150 MHz
Connector
F-type BNC 75 Ω
Supported profile
a. For MPEG 2 - MP@ML, MP@HL
b. For MPEG 4 - MP@L3, HP@L4
Decoding
a.MPEG-2 SD
b.MPEG-2 HD Down-conversion as SD on SDI or CVBS output
c.MPEG-4 AVC SD Decoding
d.MPEG-4 AVC HD Down-conversion as SD on SDI or CVBS output
Symbol rate
Min. 1 to 15 Msym/s
FEC rate
a.QPSK - 1/2, 2/3, 3/4, 5/6, 7/8
Technical Specification
Compliance statement
by the Tender
vi.
vii.
viii.
v.
Analog Video Out
Digital Video out
ASI output
Audio out
ix.
Power
x.
05.
06.
IRD Control
INSTALLATION MATERIALS
SERVICE
b. 8PSK - 3/5, 2/3, 3/4, 5/6, 8/9, 9/10
Composite PAL-B
Digital Serial Rec. BT656-1
Min. 1
2 stereo pairs MPEG 1 layer II analog audio XLR
2 stereo pairs AES/EBU digital audio XLR type
220 VAC, 50 Hz
b. Surge protection, 5 KV Typical
All controls on front panel and through web browsing.
As per requirement of the system
Installation, Testing and Commissioning.
SATELLITE EARTH STATION CONTROL ROOM
All the equipment proposed to supply under the project should comply with the Technical Specifications stated for
individual equipment. Equipment shall also comply with Digital and Analog TV Broadcast standard “PAL-B” 4:3
standard format set by ITU and EBU.
Technical Specification
Sl. No
Description of Item
Specification
Compliance statement by
the Tender
1.
2.
3.
i
a.
b.
c.
ii.
iii.
iv.
vi.
HD/SD DIGITAL VIDEO ROUTER SWITCHER (16X2)
Model : Make: Origin:
INPUTS
Total no of input
Min. 16, BNC 75Ω
Return Loss
>17dB
OUTPUTS
Total no of output
Min. 2, BNC 75Ω
Return Loss
15dB
PERFORMANCE
Jitter
<0.2 UI
Overshoot Rise Time
<10%
Data Rates
Up to 1.45 Gb/s
AUTO LOUDNESS CONTROL
Model : Make: Origin:
General Feature
a. loudness control differences between
programs and commercials (Advertisement).
b. Stand alone unit
Processor
24-bit audio processing that can control at least 2
stereo pair or 4 mono of embedded audio from an HD
/ SD SDI embedding signal.
Video format
Ranging from SD (270Mb/s) and HD (1.485Gb/s)
signals
Access and configuration
Remotely through software or from front panel
Input and output
BNC, 75Ω
MINIMUM 15" LED MONITOR
Model : Make: Origin:
Input
CCVS (composite) PAL
BNC, 75Ω, 1.0 Vp-p
SD-HD SDI
2 x BNC, 75Ω up to 1.485Gb/s with embedded audio
HDMI
1x HDMI
Resolution
Minimum 1920 x 1080 pixels
Contrast ratio
100,000 : 1
Viewing angle
180˚
Aspect Ration
16:9
vii.
viii.
ix.
Audio monitor
Power input
Accessories:
Min. 1.0 W (mono) or through bar-graph level meter
220V AC 50Hz
All necessary accessories including rack mounting
adapter, and optional card if any for above system.
Mandatory Spare Units:
As per Specification mentioned in Item serial 2 of this section.
01.
MPEG-4 Encoder
As per Specification mentioned in Item serial 3 of this Section.
02.
DVB-S2 Modulator
As per Specification mentioned in Item serial 4 of this Section.
03.
70 MHz to C-Band Up-converter
As per Specification mentioned in Item serial 5 of this Section.
04.
400 Watt TWT Power Amplifier
All equipment and component of the system must be compatible and integrate-able in the system.
RELATED SERVICES FOR EARTH STATION EQUIPMENT
01.
Installation materials
As per requirement
02.
Services: (a) Installation, Testing
As per requirement
and Commissioning (b) Preshipment inspection and training
Supply Record
Name and
Address of user
Description of
Equipments
Name and Origin
of Manufacturer
Period of using
Date of
Commissioning
Price of the
Equipment
User certificate must be submitted along with the tender by the tenderer.
Original Payment Terms
GCC 27.1
The method and conditions of payment to be made to the supplier under this contract shall be as follows:
The payment shall be made in accordance with the following schedule:
Through an irrevocable confirmed letter of credit opened in favor of the supplier in a schedule bank of
Bangladesh with the advise of supplier’s Bank in his country in the currency stated in the contract US$.
a.
For Goods :
Eighty percent (80%) of the contract price of the goods will be upon loading of the 100% goods on
board of the carrier against the documents specified in the GCC.23 Remaining twenty percent (20%)
upon presentation of final acceptance Certificate by the purchaser.
b For Services :
Hundred percent (100%) of all such costs within thirty (30) calendar days of presentation of final
acceptance certificate.
Acceptance Tests :
The Goods and the Services shall be accepted as a whole in accordance with the Technical
Specifications in Section-7 and schedule of requirement in section-6.
In order to determine the compliance of the Goods and the Services with the requirements of the
Technical Specifications, the Supplier shall carry out tests by themselves in the presence of Purchaser’s
representative. When the Purchaser is satisfied with the results of the Acceptance Tests the Goods and
the Services have been completed in accordance with the Technical Specifications and other
requirements of the contract, the Purchaser shall issue a Certificate of Provisional Acceptance and the
Goods shall be deemed to be provisionally accepted and absolute and exclusive right and interest to
the Goods shall vest in the Purchaser on the actual deemed date.
Provisional Acceptance:
The Certificate of Provisional Acceptance may be qualified or may have annexed to it an agreed list of
outstanding items which do not affect the normal operation and maintenance of the Goods in
compliance with the requirements of the Contract and the timetable for the remedy of such
outstanding items, the Purchaser is entitled to retain a part of payment due upon Provisional
Acceptance.
Rectification of Defects:
If a Certificate of Provisional Acceptance is not issued due to substantial major defects in the Goods,
then the Purchaser shall advise the Supplier of a period in which the fault (s) shall be remedied to the
satisfaction to the Purchaser. The Purchaser shall issue a notice detailing the defects which require
remedying and the period of time in which rectification is to occur and the issue of such notice shall
not prejudice any of the Purchaser’s other rights of remedies under this Contract. The Supplier shall
issue further report on the results of Acceptance Test after such remedial action has been taken by the
Supplier.
Final Acceptance :
At the end and not later than thirty (30) calendar days after satisfactory completion of the provisional
Acceptance Tests, as described in the Scope of Work and in the Technical Specifications, of all Goods
and provided that the Supplier has full filled his commitments under the Contract, the Purchaser shall
issue a Certificate of Final acceptance.
The Certificate of Final Acceptance shall not apply to these parts which may have been replaced during
the Warranty Period.
At the discretion of the Purchaser, the Final Acceptance Test Program may consist of a reputation of a
part of the whole of the Acceptance Program. The Purchaser reserves the right to dispense with the
Final Acceptance Test and issue the Certificate of Final Acceptance.
Payment for Goods supplied from abroad:
Payment of foreign currency portion shall be made in [USD of the Contract Price] in the following
manner:
(a) On Shipment: Eighty (80) percent of the Contract Price of the Goods shipped shall be paid through
irrevocable confirmed letter of credit opened in favor of the Supplier in a bank in its country, upon
submission of documents specified in GCC Clause 23.
(b) Payment of local currency portion shall be made in Bangladesh Taka
within thirty (30) days
of presentation of claim supported by a certificate from the Purchaser declaring that the Goods have
been delivered and that all other contracted Related Services have been performed.
Payment for Goods and Services supplied from within the Bangladesh:
Payment for Goods and Services supplied from within the Purchaser’s country shall be made in
Bangladeshi Taka.
Payments shall be made in no case later than the days [Not Applicable] after submission of an invoice
or request for payment by the Supplier, and after the Purchaser has accepted it.
The payment-delay period after which the Purchaser shall pay interest to the supplier shall be [Not
Applicable] days after submission of an invoice or request for payment by the Supplier, and after the
Purchaser has accepted it.
The interest rate that shall be applied is [ 0%] percent
The insurance coverage shall be: Cost of Insurance from the port of loading to the site of purchaser
shall be borne by the purchaser and the cost of insurance from the factory to the port of loading shall
be borne by the supplier.
THE END
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising