Product Flyer Product Flyer

Product Flyer Product Flyer
C4® and C4c™
CMTS
16D Cable Access
Module
Features

DOCSIS® 3.0 downstream channel
bonding

Legendary C4 CMTS integrated “hitless”
RF sparing

Hot Swappable

Supported in all C4 and C4c CMTS
chassis

XD Field Software Upgrade for deployed
16D CAMs via software license key
Application
The ARRIS C4® and C4c™ 16 Downstream Cable Access Module (16D CAM) supports
sixteen DOCSIS® or EuroDOCSIS™ 3.0 downstream channels. These channels are
grouped onto four upconverters with four Annex A or Annex B channels per
upconverter. The Physical Interface Card (PIC) of the 16D CAM is has four F-connectors
with
ith each
h F-connector
F
t connected
t d to
t the
th output
t t off one off the
th upconverters.
t
E h
Each
downstream channel on the same upconverter/F-connector must have a unique center
frequency, but the channels are not required to be contiguous. The downstream
channels on a single F-connector can span up to 80MHz of spectrum, allowing an MSO
flexibility in choosing DOCSIS downstream frequencies.
DOCSIS
DOCS
S 3.0 Do
Downstream
st ea C
Channel
a e Bo
Bonding
d g
The 16D CAM supports DOCSIS 3.0 downstream channel bonding with variable size
bonding groups. This allows for the aggregation of two or more DOCSIS channels to
support ultra high bandwidths. For example, Release 7.4 supports up to eight bonded
downstream channels. With Annex B channels, eight channel bonding provides a
320Mbps data stream to a subscriber‘s DOCSIS 3.0 cable modem.
ARRIS FlexCAM™ RF Sparing Technology
The C4 CMTS contains patented FlexCAM technology that provides fully integrated
“hitless” RF sparing. This sparing includes support for multiple 16D CAM RF sparing
groups, the size of which can vary from one to seven active 16D CAMs. If a failure occurs
on a 16D CAM with “hitless” RF sparing, the spare 16D CAM automatically replaces the
packet
failed module so that all of the cable modems remain in service with minimal p
loss.
Product Flyer
C4® and C4c™ CMTS 16D Cable Access Module
Legacy DOCSIS 2.0, 1.1, and 1.0 Cable Modem Support
All channels on the 16D CAM can support DOCSIS 3.0, including channel bonding, as well as DOCSIS 2.0 and 1.x modems
at the same time. Further, no external timing server is required thus minimizing total system cost and increasing system
availability.
Flexible Upstream-to-Downstream Channel Mapping
Each downstream channel on the 16D CAM can be associated with any upstream channel on a 12U CAM in the chassis.
This allows the operator to “right size” the upstream-to-downstream ratio for each service group. This flexibility reduces
capital costs as less channels will sit idle compared to a system with a fixed upstream-to-downstream ratio.
Supported in Existing C4 and C4c CMTS Chassis
The 16D CAM protects the operator’s investment as it is supported in all previously deployed C4 and C4c CMTS chassis
when
h paired
i d with
i h the
h Router
R
C
Control
l Module
M d l (RCM) and
d the
h 12U CAM.
CAM
XD Field Software Upgrade
16D CAMs deployed in a C4 or C4c CMTS with system software Release 7.4 can be field software upgraded to eXtended
Downstream (XD) operation with the purchase of a license key. A 16D CAM upgraded to XD can support 24 Annex A or
32 Annex B downstream channels. The XD field software upgrade option allows operators to increase the number of
downstream channels without purchasing new hardware.
hardware
www.arrisi.com
Find more information about 16D Cable Access Module and other C4® and C4c™ products.
 Product Specifications — 16D Cable Access Module Technical Specifications (Publication Code:
C4 CMTS 16D TS df)
C4_CMTS_16D_TS.pdf)
Customer Care
Contact Customer Care for product information and sales
 United States: 866-36-ARRIS
 International: +1-678-473-5656
The capabilities, system requirements and/or compatibility with third-party products described herein are subject to change without notice. ARRIS, the ARRIS logo,
Auspice®, C3™, C4®, C4c™, Cadant®, C-COR®, CHP Max®, ConvergeMedia™, Cornerstone®, CXM™, D5™, Digicon®, Flex Max®, Keystone™, MONARCH®, n5™, nABLE™,
nVision®, OpsLogic®, OpsLogic® Service Visibility Portal™, PLEXiS®, PowerSense™, Regal®, ServAssure™, Service Visibility Portal™, TeleWire Supply®, TLX®,
Touchstone®, VoiceAssure™, VSM™, and WorkAssure™ are all trademarks of ARRIS Group, Inc. Other trademarks and trade names may be used in this document to
refer to either the entities claiming the marks and the names of their products. ARRIS disclaims proprietary interest in the marks and names of others. © Copyright
2011ARRIS Group, Inc. All rights reserved. Reproduction in any manner whatsoever without the express written permission of ARRIS Group, Inc. is strictly forbidden.
For more information, contact ARRIS.
www.arrisi.com
i i
CMTS_16D_CAM _PF_22JUN11
C4® and C4c™ CMTS
16 Downstream Cable Acccess Module
(16D CAM) Technical Specifications
Specifications
RF Downstream
Frequency Range (MHz)
91 to 999 (DOCSIS® 3.0); 112 to 99
99 (EuroDOCSIS™ 3.0)
Modulation (QAM)
64, 256
Data Rate (Mbps) (Max.)
30.34 to 55.62 per channel
RF Output Level (dBmV)
41 to 60
Typical Modulation Error Ratio
(MER) (dB)
47
Symbol Rate (Msym/sec)
5.361 (DOCSIS); 6.952 (EuroDOCSIS)
Bandwidth (MHz)
6 (DOCSIS), 8 (EuroDOCSIS)
Output (load) impedance (ohms) 75
Physical
Power
-48 VDC (-44 to -72 VDC)
Power Consumption:
Classic Rev G
139 W max at -48 VDC, 77°F (25°C)
Optimized
136 W max at -48 VDC, 77°F (25°C)
Operating
p
g Temperature:
p
Short Term °F (°C)
+23 to +131 (-5 to +55)
Long Term °F (°C)
+41 to +104 (+5 to +40)
Storage Temperature °F (°C)
-40 to +158 (-40 to +70)
Operating Humidity (Min.-Max.)
5 to 85% (Non condensing)
Dimensions (H x W x D) in. (cm)
15.8 x 0.8 x 15.0 (40.0 x 1.9 x 38.1)
Weight lbs. (kg)
approx 4 (1.8)
Support with Software Release 7.4
16D CAM (Annex A or Annex B)
4-4-4-4 Channels per F Connector
IPv6 Phase 3
Cable Source Verify with DHCP Lease Query
Route Injection (RI) for DHCPv6 Prefix Delegation
OSPFv3
DOCSIS 3.0 Multicast IP Video Support (via IGMPv3 Control)
Policy-Based Routing
Cross-MAC Domain Dynamic Load Balancing
Additional Classifier Support (for MGPI applications)
DOCSIS 3
3.0
0 Eight Channel Bonding (Downstream)
DOCSIS 3.0 Four Channel Bonding (Upstream)
BSoD L2 VPN
BPI+ Enforce
IPDR/SP
Integrated Upstream Agility
PIM-SSM,
PIM
SSM IGMPv2
IGMPv2, and static multicast
RIPv2 (RFC 1723), OSPFv2 (RFC 2328)
IS-IS, BGPv4
PacketCable™ Multimedia Support
Dynamic Cable Modem Load Balancing
SII Lawful Intercept (RFC 3924)
In-chassis Mixed Annex A & Annex B support
802.1Q VLAN tagging
Extended ACLs & Named ACLs
Secure Shell v2 (SSHv2)
DOCSIS Ping
ARP Abuse Counts
DHCP Relay Agent (Option 82)
DNS Client
TFTP Enforce and Dynamic MIC
Continued on the next page…
Technical Specificattion
ARRIS Technical Specifications
Ordering Information
Part Number
Description
16D CAM Kits
722928
Classic 16D DOCSIS/EuroDOCSIS CAM Kit (Active): 1 x 16D CAM, PIC, and SW for C4 CMTS
789513
Classic 16D DOCSIS/EuroDOCSIS CAM Kit (Spare): 1 x 16D CAM, PIC, and SW for C4 CMTS
794040
S/EuroDOCSIS CAM Kit (Active): 1 x 16D CAM, PIC, and SW for C4 CMTS
Optimized 16D DOCSIS
794043
Optimized 16D DOCSIS
S/EuroDOCSIS CAM Kit (Spare): 1 x 16D CAM, PIC, and SW for C4 CMTS
790540
Classic 16D DOCSIS/EuroDOCSIS CAM Kit (Active): 1 x 16D CAM
CAM, PIC
PIC, and SW for C4c CMTS
794046
Optimized 16D DOCSIS
S/EuroDOCSIS CAM Kit (Active): 1 x 16D CAM, PIC, and SW for C4c CMTS
XD Field Software Upgrade
793929
Upgrade 16D to 24D Eu
uroDOCSIS CAM – License Key for C4 CMTS Field Upgrade
793930
Upgrade 16D to 32D DO
OCSIS CAM – License Key for C4 CMTS Field Upgrade
793979
Upgrade 16D to 24D Eu
uroDOCSIS CAM – License Key for C4c CMTS Field Upgrade
793980
Upgrade 16D to 32D DO
OCSIS CAM – License Key for C4c CMTS Field Upgrade
Maintenance Plan (required)
708387
Software Maintenance – Phone Plus Gold
Specifications are subject to change without notice.
The capabilities, system requirements and/or compatibility with third-party products described here
ein are subject to change without notice. ARRIS, the ARRIS logo,
Auspice®, C3™, C4®, C4c™, Cadant®, C-COR®, CHP Max™, CHP Max5000™, ConvergeMedia™, Cornersttone®, CORWave™, CXM™, D5®, Digicon®, ENCORE®, Flex Max®,
HEMi®, Keystone™, MONARCH®, MOXI®, n5®, nABLE®, nVision®, OpsLogic®, OpsLogic® Service Visibilitty Portal™, PLEXiS®, PowerSense™, QUARTET®, Regal™,
ServAssure™, Service Visibility Portal™, TeleWire Supply®, TLX®, Touchstone®, EGT VIPr®, VoiceAssure
e™, VSM™, and WorkAssure™ are all trademarks of ARRIS Group,
Inc Other trademarks and trade names may be used in this document to refer to either the entities cclaiming the marks and the names of their products.
Inc.
products ARRIS
disclaims proprietary interest in the marks and names of others. © Copyright 2011 ARRIS Group, Inc. All
A rights reserved. Reproduction in any manner whatsoever
without the express written permission of ARRIS Group, Inc. is strictly forbidden. For more informatio
on, contact ARRIS.
www.arrisi.com
16DCAM_TS_24JUN11
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising