6000 · 7000 lbs

GP-VX

VERACITOR

®

PNEUMATIC TIRE TRUCKS

6,000 · 7,000 lbs

Yale Veracitor ® GP-VX Series

This series of trucks is available in several configurations, designed to meet and exceed your material handling application requirements. The Veracitor ® forklift can be configured for maximum performance and lowest cost of operation for medium to heavy duty applications with state-of-the-art features and superior power. The innovative Yale ® Flex Drive offers selectable performance modes that provide the flexibility to maximize fuel economy or productivity to match application needs.

Yale Veracitor ® VX Industrial Engines feature a rigid cast iron block and main bearing caps. The nodular iron crankshaft is supported with five main bearings. The Kubota LPG and Yanmar diesel engines feature cast iron cylinder head. All engines feature hardened exhaust valve seats with stellite coated valves for superior durability. Ignition systems feature individual coils for each cylinder. The Kubota LPG engine features a long cylinder stroke for improved torque. The PSI engine features twin engine balance shafts to reduce engine vibration, resulting in smoother and quieter performance. PSI and Kubota engines feature electronic throttle control for precise performance and consistent operation, and a coil over plug ignition design which eliminates spark plug wires.

Fuel System

All engines are EPA emissions compliant and feature closed loop emissions regulation systems that continually monitor exhaust and adjust fuel/air mix as necessary. Yale Veracitor ®

VX engines use a mixer carburetor and a vaporizer/regulator to convert the fuel from a liquid to a gas. The PSI and Kubota

LPG engines feature three individual performance modes to optimize fuel economy in applications with different productivity levels. Yanmar diesel engines use a rotary fuel injection pump to meter the proper amount of fuel to each cylinder.

Transmission

There are two transmission selections available with multiple engine configurations that will handle a wide variety of material handling applications. Both transmissions feature electronic inching (requires no adjustment), electronic shift control, neutral start switch, and anti-restart protection. The Techtronix 100 features auto deceleration through the controlled application of clutch packs, and also reduces tire spin by precisely regulating engine speed during controlled power reversals. A single pedal controls both inching and braking. Optional dual inch/brake pedals are available for operators who prefer this design. A 10 micron filter protects the transmission from abrasive contaminants.

Cooling System employs a 17” blade pusher-type fan. A high capacity, cross-flow radiator ensures rapid heat dissipation.

The sealed cooling system operates at a pressure of 15 psi and includes a coolant recovery tank for visual inspection of coolant level. The transmission oil cooler is integrated into the radiator and is located in the side tank. The optional combi-cooler radiator features an externally mounted transmission oil cooler for increased heat transfer capability.

All radiators are soft-mounted for excellent durability.

Drive Axle

The drive axles are designed to withstand heavy duty loads and absorb shock loads. The wheel hubs rotate on large tapered roller bearings. The drive shaft transmits torsion to the drive axle from the engine and transmission. Transmission torque occurs through an industrial hypoid ring gear and pinion differential assembly.

The drive axle is a self contained assembly that is isolated from the transmission by a heavy duty rubber isolator. The axle shafts utilize a “rolled fillet” root spline design for increased resistance to torsion stress. A magnetic sump plug is used to collect any metal particles that are circulating in the axle oil, preventing excessive component wear.

Hydraulic Brakes

Asbestos-free self-adjusting brake linings are bonded to steel shoes and act against cast iron drums. Single circuit master cylinder has a sealed fluid reservoir and features a fluid level sensor which activates an indicator light located on the instrument panel.

Independent, hand adjustable parking brake with push-button release has an audible alarm.

(continued on back)

LPG/Dual Fuel Engine Specifications

Engine PSI 2.4L

Cylinders 4

Camshaft Overhead Valve

Displacement 143 cu.in/2.4 liter

Torque 121 lb.ft @ 2000 RPM

Horsepower 59hp

Diesel Engine Specifications

Engine Yanmar 2.6L

Cylinders 4




Horsepower 46hp

LPG Engine Specifications

Engine Kubota 2.5L

Cylinders 4



Torque

Horsepower

131 lb.ft @ 1000 RPM

59 @ 2500 rpm

Air Filtration Two Stage, Dry Type

Emission Control Closed Loop

Diesel Engine Specifications

Engine Yanmar 3.3L

Cylinders 4




Horsepower 58hp

Truck shown with optional equipment

8.7 x 2

(220) x 2

17

24

22

23

21

44.9

(1140)

19

10

18

11 Opt.

11 Std.

15 15

Non-Susp in (mm)

Semi in (mm)

Full in (mm)

Swivel Full in (mm)

Tall OHG (Std.) 42.0 (1068) 42.5 (1080) 42.0 (1068) 41.7 (1062)

Short OHG (Opt.) 39.4 (1001) 39.9 (1013) N/A N/A see chart above

37

22

28.6

(727) 7

35

16

38

28.0°

20

GP060VX

45.9 (1167)

GP070VX

44.6 (1134)

15.4

(390)

Capacity Grade Clearance

GP060VX

GP070VX

52%

54%

1 Manufacturer Name

2 Model

Engine

3 Rated Capacity

4 Load Center, Distance

5 Power Type - LPG, Diesel, Dual Fuel

6 Operator Type

7 Step Height

8 Tire Type - Cushion, Solid, Pneumatic

9 Wheels, Number - Front/ Rear

10 Lift Height, Top of Fork (TOF)

11 Lift Heights, Standard Limited Free Lift (LFL) w/o LBR (TOF)

Lift Heights, Optional Full Free Lift (FFL) w/o LBR (TOF)

12 Standard Carriage Width

13 Forks, Thickness x Width x Length

Forks, Thickness x Width x Length

14 Fork Spread, Outside Dimensions

15 Mast Tilt Angles, Forward/Backward

16 Length To Face of Forks

17 Overall Width, Standard Tread

Overall Width, Wide Tread

18 Height, Standard Mast - Lowered

19 Height, Standard Mast - Extended with LBR

Height, Standard Mast - Extended without LBR

20 Height, Standard Overhead Guard

Height, Optional Overhead Guard

21 Turning Radius, Minimum Outside (OTR)

22 Length, Center of Wheel to Face of Forks

23 Aisle Width, Right Angle Stack (Add Length of Load)

24 Equal Aisle, 90-Degree Intersecting Aisle

25 Travel Speed, Powershift Transmission RL/NL

26 Lift Speed, Standard 2-Stage LFL RL/NL

Lift Speed, Optional 2-Stage FFL RL/NL


27 Lowering Speed, Standard 2-Stage LFL RL/NL

Lowering Speed, Optional 2-Stage FFL RL/NL


28 Maximum drawbar pull RL/NL

Drawbar Pull, Standard Transmission @ 1 mph RL/NL

29 Gradeability, Standard Transmission @ 1 mph RL/NL

31 Weight, Standard Truck (2-Stg. LFL) NL

Weight, Standard Truck (2-Stg. LFL) RL

32 Axle Loading, Static Front/Rear NL

Axle Loading, Static Front/Rear RL

33 Tire Size, Front

34 Tire Size, Rear

35 Wheelbase

37 Ground Clearance, Lowest Point NL (w/RL subtract-6mm)

38 Ground Clearance, Center of Wheelbase NL

39 Service Brake - Method of Control/Operation

40 Parking Brake - Method of Control/Operation

41 Battery Type

42 Volts/Cold Cranking Amps

43 Engine, Manufacturer/Model

44 Permanent Output

45 Torque @ Rated RPM

46 Number of Cylinders/Displacement

47 Transmission Type, Standard

Standard Speeds, Forward - Reverse

49 Hydraulic Tank Capacity (Drain and Refill)

50 Fuel Tank Capacity (Gas & Diesel Powered Units Only)

51 Auxiliary Hydraulic Pressure Relief for Attachments lb (kg) in (mm) in (mm) in (mm) in (mm) in (mm) v/cca hp (kw) ft Lbs (kg/m)

No/cc (ci) gal (liter) gal (liter)

PSI (Mpa) in (mm) in (mm) in (mm) in (mm) in (mm) mph (km/h) ft/min (m/s) ft/min (m/s) ft/min (m/s) ft/min (m/s) ft/min (m/s) ft/min (m/s) lb (kg) lb (kg) degrees in (mm) in (mm) in (mm) in (mm) in (mm) in (mm) in (mm) in (mm) in (mm) in (mm) in (mm) in

(mm) in (mm)

Percent % lb (kg) lb (kg) lb (kg) lb (kg)

LPG

PSI 2.4L

11.8/12.4 (19.0/20.0)

104/108 (.53/.55)

102/102 (.52/.52)

100/104 (.51/.53)

4497/2346 (2040/1064)

3845/2346 (1744/1064)

25/26

Dual Fuel

12/475

PSI 2.4L

59 (44)

121 (16.7) @ 2000 RPM

4/2351 (143)

Yale

GP060VX

Kubota 2.5L

6000 (2722)

24.0 (610)

LPG

Sit-Down Rider

16 (407)

Pneumatic

2x/2

126 (3209)

5 (140)

59 (1500)

42 (1067)

2.0 X 4.9 X 42

(50 X 125 X 1067)

43.3 (1099)

6F/6B

103.4 (2625)

46.7 (1186)

Yanmar 2.6L

Diesel

Yanmar 3.3L

52.0 (1321)

89 (2245)

175 (4330)

154 (3905)

86.0 (2185)

83 (2118)

89.6 (2277)

18.9 (480)

108.5 (2757)

82.8 (2077)

11.1/11.3 (17.8/18.2)

108/110 (.55/.56)

104/106 (.53/.54)

100/104 (.51/.53)

104/93 (.53/.47)

11.3/11.9 (18.2/19.1)

108/122 (.55/.62)

85/120 (.43/.61)

104/118 (.53/.60)

12.4/13.1 (20.0/21.1)

114/118 (.58/.60)

114/114 (.58/.58)

114/114 (.58/.58)

98/83 (.50/.42)

114/87 (.58/.44)

4530/2346 (2055/1064) 4336/2346 (1967/1064) 4429/2346 (2009/1064)

3920/2346 (1778/1064) 3677/2346 (1668/1064) 3968/2346 (1800/1064)

26/26 23/26 26/26

9943 (4510)

15943 (7232)

3865/6077 (1753/2757)

13905/2038 (6307/924)

28 x 9 - 15

6.50 x 10

63.9 (1623)

6.2 (157)

6.3 (160)

Foot/Hydraulic

Hand/Mechanical

Maintenance Free

Kubota 2.5L

59 (44)

131 (18) @ 1000 RPM

4/2491 (152)

Electronic Powershift

1-1

12.1 (45.8)

13.9 (52.8)

2250 (15.5)

Yanmar 2.6L

46 (34)

106 (15)@ 1400 RPM

12/770

Yanmar 3.3L

58 (43)

139 (19)@ 1700 RPM

4/2659 (162) 4/3319 (203)

1 Manufacturer Name

2 Model

Engine

3 Rated Capacity

4 Load Center, Distance

5 Power Type - LPG, Diesel, Dual Fuel

6 Operator Type

7 Step Height

8 Tire Type - Cushion, Solid, Pneumatic

9 Wheels, Number - Front/ Rear

10 Lift Height, Top of Fork (TOF)

11 Lift Heights, Standard Limited Free Lift (LFL) w/o LBR (TOF)

Lift Heights, Optional Full Free Lift (FFL) w/o LBR (TOF)

12 Standard Carriage Width

13 Forks, Thickness x Width x Length

Forks, Thickness x Width x Length

14 Fork Spread, Outside Dimensions

15 Mast Tilt Angles, Forward/Backward

16 Length To Face of Forks

17 Overall Width, Standard Tread

Overall Width, Wide Tread

18 Height, Standard Mast - Lowered

19 Height, Standard Mast - Extended with LBR

Height, Standard Mast - Extended without LBR

20 Height, Standard Overhead Guard

Height, Optional Overhead Guard

21 Turning Radius, Minimum Outside (OTR)

22 Length, Center of Wheel to Face of Forks

23 Aisle Width, Right Angle Stack (Add Length of Load)

24 Equal Aisle, 90-Degree Intersecting Aisle

25 Travel Speed, Powershift Transmission RL/NL

26 Lift Speed, Standard 2-Stage LFL RL/NL



27 Lowering Speed, Standard 2-Stage LFL RL/NL



28 Maximum drawbar pull RL/NL

Drawbar Pull, Standard Transmission @ 1 mph RL/NL

29 Gradeability, Standard Transmission @ 1 mph RL/NL

31 Weight, Standard Truck (2-Stg. LFL) NL

Weight, Standard Truck (2-Stg. LFL) RL

32 Axle Loading, Static Front/Rear NL

Axle Loading, Static Front/Rear RL

33 Tire Size, Front

34 Tire Size, Rear

35 Wheelbase

37 Ground Clearance, Lowest Point NL (w/RL subtract-6mm)

38 Ground Clearance, Center of Wheelbase NL

39 Service Brake - Method of Control/Operation

40 Parking Brake - Method of Control/Operation

41 Battery Type

42 Volts/Cold Cranking Amps

43 Engine, Manufacturer/Model

44 Permanent Output

45 Torque @ Rated RPM

46 Number of Cylinders/Displacement

47 Transmission Type, Standard

Standard Speeds, Forward - Reverse

49 Hydraulic Tank Capacity (Drain and Refill)

50 Fuel Tank Capacity (Gas & Diesel Powered Units Only)

51 Auxiliary Hydraulic Pressure Relief for Attachments lb (kg) in (mm) in (mm) in (mm) in (mm) in (mm) v/cca hp (kw) ft Lbs (kg/m)

No/cc (ci) gal (liter) gal (liter)

PSI (Mpa) in (mm) in (mm) in (mm) in (mm) in (mm) mph (km/h) ft/min (m/s) ft/min (m/s) ft/min (m/s) ft/min (m/s) ft/min (m/s) ft/min (m/s) lb (kg) lb (kg) degrees in (mm) in (mm) in (mm) in (mm) in (mm) in (mm) in (mm) in (mm) in (mm) in (mm) in (mm) in

(mm) in (mm)

Percent % lb (kg) lb (kg) lb (kg) lb (kg)

Yale

GP070VX

PSI 2.4L

Kubota 2.5L

LPG

7000 (3175)

24.0 (610)

11.8/12.4 (19.0/20.0)

104/108 (.53/.55)

102/102 (.52/.52)

100/104 (.51/.53)

Dual Fuel LPG

Sit-Down Rider

16.0 (407)

Pneumatic

2x/2

126 (3209)

5 (140)

59 (1500)

42 (1067)

2.0 X 4.9 X 42

(50 X 125 X 1067)

43.3 (1099)

6F/6B

107.6 (2734)

46.7 (1186)

52.0 (1321)

89 (2245)

175 (4330)

154 (3905)

86 (2185)

83 (2118)

93.7 (2380)

18.9 (480)

112.6 (2860)

84 (2111)

11.1/11.3 (17.8/18.2)

110/110 (.56/.56)

104/106 (.53/.54)

102/104 (.52/.53)

104/93 (.53/.47)

Yanmar 3.3L

Diesel

12.4/13.1 (20.0/21.1)

114/118 (.58/.60)

114/114 (.58/.58)

114/114 (.58/.58)

4465/2317 (2025/1051)

3810/2317 (1730/1051)

22/24

98/83 (.50/.42)

114/87 (.58/.44)

4500/2317 (2041/1051) 4407/2317 (1999/1051)

3887/2317 (1763/1051) 3946/2317 (1790/1051)

23/24 23/24

10357 (4698)

17356 (7873)

3810/6547 (1728/2970)

15304/2052 (6942/931)

28 x 9 - 15

6.50 x 10

66.9 (1700)

6.2 (157)

7.3 (185)

Foot/Hydraulic

Hand/Mechanical

Maintenance Free

12/475

PSI 2.4L

59 (44)

121 (16.7) @ 2000 RPM

4/2351 (143)

Kubota 2.5L

59 (44)

131 (18) @ 1000 RPM

4/2491 (152)

Electronic Powershift

1-1

12.1 (45.8)

13.9 (52.8)

2250 (15.5)

12/770

Yanmar 3.3L

58 (43)

139 (19)@ 1700 RPM

4/3319 (203)

GP060-070VX MAST DIMENSIONS

Free Lift (TOF) Overall Extended Height

Maximum Fork

Height (TOF) †

Overall Lowered

Height with LBR in (mm) in (mm)

2-STAGE LIMITED FREE LIFT (LFL) Hi-Vis™ 2 MAST in (mm)

126 (3209) 89 (2245) 175 (4430)

2-STAGE FULL FREE LIF T (FFL) Hi-Vis™ MAST

122 (3110) 87 (2195) 171 (4335)

130 (3310) 91 (2295)

3-STAGE FULL FREE LIFT (FFL) Hi-Vis™

2

MAST

179 (4535)

181 (4618) 87 (2195) 230 (5840)

187 (4768)

211 (5368)

228 (5818)

91 (2295)

101 (2545)

107 (2695)

236 (5990)

260 (6590)

278 (7040) without LBR in (mm)

154 (3905)

150 (3805)

158 (4005)

208 (5260)

213 (5410)

237 (6010)

256 (6495) with LBR in (mm)

5 (150)

37 (965)

38 (975)

37 (965)

41 (1065)

51 (1315)

57 (1465) without LBR in (mm)

5 (150)

59 (1500)

63 (1600)

63 (1600)

65 (1655)

75 (1905)

80 (2055)

Approximate Total Weight of Standard

Equipped Truck

GP060VX lbs (kg)

GP070VX lbs (kg)

9943 (4510)

9957 (4516)

9994 (4533)

10307 (4675)

10352 (4696)

10481 (4754)

10662 (4836)

† Lift heights over 171.5” (4356 mm) maximum fork height are considered highlifts and require reduced capacity and restricted back tilt.

Total approximate weights listed include mast, standard carriage, load backrest (LBR) and 70 lbs. LPG tank and tank bracket.

10357 (4698)

10371 (4704)

10408 (4721)

10721 (4863)

10766 (4883)

10894 (4942)

11076 (5024)

(continued from cover)

Wet Disc Brakes

Optional oil-cooled wet disc brakes provide excellent stopping power with an extremely long service life. The brake cooling oil circulates within the axle to provide consistent braking performance with no fade or change in pedal effort or travel, throughout the entire shift and beyond.

Hydrostatic Power Steering provides responsive control and eliminates mechanical linkages for reduced surface shock and simplified maintenance. The steering wheel is 12 inches in diameter with a textured surface grip and spinner knob, and requires only four turns lock-to-lock. The center mounted steer cylinder is located within the confines of the steer axle for protection.

Steer Axle is constructed of cast steel and is rubber shock mounted to the frame for reduced wear and vibration. The

Continuous Stability System (CSS™) enhances lateral truck stability through reduced steer axle articulation, while simultaneously allowing uncompromised travel across various surfaces.

Chassis designed by Finite Element Analysis (FEA) methods contains a rugged, unitized frame structure with a low step for simple entrance to the operator’s compartment. Ergonomically designed overhead guard is bar type for excellent visibility and reduced noise.

Operator’s Compartment features cowl-mounted hydraulic control levers positioned on the right side of the steering column. Optional

Accutouch electro-hydraulic controls are integrated into the operator’s right-side armrest allowing superior ergonomic actuation. A pedal arrangement with a large, single inch/brake pedal is standard. Tilt cylinders are located beneath the floor for uncluttered space. Rubber floor mat reduces noise and vibration. Floorplate can be removed without tools for excellent service access. Low step height and a convenient hand grip provide easy entry and exit to and from the truck.

Intellix VSM acts as a master truck controller, providing extensive monitoring and control of truck functions and systems. CANbus technology reduces wiring complexity and enables comprehensive communications between truck systems. The ergonomically positioned dash display transmits continual feedback to the operator and allows for communication of service codes. Comprehensive on-board diagnostics enable quick and easy troubleshooting. The electrical system features sealed connectors and Hall Effect sensors for superior dependability.

Hydraulic System incorporates a gear type pump, cast iron body for quiet efficiency. The system is protected from overloads by a main relief valve for the lift circuit and a secondary relief valve for tilt and auxiliary functions. Oil is double filtered through a 100 mesh suction line strainer and 10 micron return line filter. The hydraulic tank is integrated into the frame. An emergency lowering valve is provided to allow the load to be lowered in the event of power loss. O-ring face seal fittings are used in all high pressure hydraulic connections.

Yale Hi-Vis TM Masts are available in 2-stage LFL (Hi-Vis TM

2

), 2-stage

FFL (Hi-Vis TM ), and 3-stage FFL (Hi-Vis TM

2

) models. Mast features flush-faced design with geometrically matched, angled load roller bearings which are canted, yet provide full-face roller contact. The mast front rail flange angle coupled with the inverted “J” inner channel and three degree mast rollers significantly reduce channel and roller wear. “J-hook” mast mounting system allows for convenient mast installation and removal. A bronze phenolic mast pivot bushing with woven reinforcement offers high load carrying capability with outstanding durability.

Options

PSI 2.4L Dual Fuel Engine

Yanmar 2.6 or 3.3L Diesel Engine

Techtronix 100 transmission

– Auto Deceleration System

– Controlled power reversal feature

– Controlled rollback on ramps

Powertrain protection with engine shutdown system

Premium monitoring package

High air intake with precleaner

Accumulator

Keyless start (w/auxiliary key switch)

Various light packages

– Two brake/back-up high intensity LED lights

– Two front and one rear halogen or LED work lights

– Two front, one rear halogen or LED work light and two brake/tail/back-up high intensity LED lights

Traction speed limiter

Heavy duty combi-cooler radiator

Swing-out, drop-down EZ-tank bracket

Accutouch mini-lever electro-hydraulic control

Return-to-set tilt

Rear drive handle with horn button

High-visibility non-cinch seat belt with or without interlock

Polycarbonate overhead guard rain top

Swivel full-suspension seat

Foot Directional Control pedal

Extension tubes with or without quick disconnects

10 o forward/6 o backward tilt

Operator password

Load weight display

Impact monitor

Seatside directional control

Integral sideshifting fork positioner

Dual side view mirrors

Audible alarm - reverse actuated 82-102 db(A) self-adjusting

Visible alarm amber strobe light - continuous activated, overhead guard mounted

Paper applications kit

Operator pre-shift checklist

Oil-cooled wet disc brakes

Pneumatic shaped solid tires

Radial tires

Dual drive tires

Cab with or without air conditioning

Dual pedal inch/brake

Vented hood

Overhead exhaust

Integral sideshifter

UL options of GS, D, DS, LPG, LPS

YALE MATERIALS HANDLING CORPORATION

P.O. Box 7367, Greenville, NC 27835-7367 www.yale.com

Yale is a Registered Trademark and is a Registered Copyright.

©Yale Materials Handling Corporation 2014. All Rights Reserved.

Manufactured in our own ISO 9001 and 14001 Registered Facilities

2219-3D 12/2014 All trucks shown with optional equipment.

Truck performance may be affected by the condition of the vehicle, how it is equipped and the application. Consult your Yale ® Industrial

Truck Dealer if any of the information shown is critical to your application. Specifications are subject to change without notice.

This truck meets all applicable mandatory requirements of ANSI B56.1 Safety Standard for Powered Industrial Trucks at the time of manufacture. Classified by Underwriters’ Laboratories, Inc., as to fire and electric shock hazard only for Type E industrial trucks.

The Yale ® products included in this document may be covered by US patent 6,684,148 and other patents pending.

No results