PT-EZ510 SPEC FILE - Projector Central

PT-EZ510 SPEC FILE - Projector Central
S
P
E
C
F
I
L
E
P ro d u c t N u m b e r :
PT-EX510/EX510L
P ro d u c t N a m e :
LCD Projectors
As of August 2014. Specifications and appearance are subject to change without notice.
SFL14M020
1/16
PT-EX510/EX510L
LCD Projectors
Specifications
Main unit
Power supply
Power consumption
Optical system
LCD panel
Panel size
Display method
Pixels
Pixel configuration
Lens
Lamp
Screen size
Brightness* 2
Center-to-corner uniformity* 2
Contrast* 2
Resolution
Scanning frequency
HDMI/DVI-D
RGB
YPBPR (YCBCR)
Video/YC
Optical axis shift
100–240 V AC, 50/60 Hz
485 W (0.3 W with STANDBY MODE set to ECO* 1 , 4 W with STANDBY MODE
set to NORMAL, 34 W with in STANDBY MODE of Audio Setting set to on.)
Dichroic mirror separation/prism synthesis system
20.0 mm (0.79 inches) diagonal (4:3 aspect ratio)
Transparent LCD panel (× 3, R/G/B)
786,432 (1,024 × 768) × 3, total of 2,359,296 pixels
Stripe
Powered zoom/focus lens (1.7– 2.8:1), F 1.7 – 2.3, f 26.9 – 45.4 mm
Optional powered zoom/focus lenses and fixed-focus lens
335 W UHM lamp
1.02 – 10.16 m (40 – 400 inches), 4:3 aspect ratio
*1.52 – 10.16 m (60 – 400 inches) with the ET-ELW22 (4:3 aspect ratio)
5,300 lumens (LAMP POWER: AUTO/NORMAL, Dynamic mode, Standard lens)
90%
2,000:1 (full on / full off, LAMP POWER: AUTO, Dynamic mode)
1,024 × 768 pixels
fH: 15–100 kHz, fV: 24–120 Hz, dot clock: 25 MHz–162 MHz (VGA: 640 ×
480 pixels to WUXGA: 1,920 × 1,200 pixels, VESA CVT-RB compliant,
compatible with HDCP)
fH: 15–100 kHz, fV: 24–120 Hz, dot clock: up to 162 MHz
fH 15.73 kHz; fV 59.94 Hz,
480i (525i):
fH 15.63 kHz; fV 50 Hz,
576i (625i):
fH 31.47 kHz; fV 59.94 Hz,
480p (525p):
fH 31.25 kHz; fV 50 Hz,
576p (625p):
fH 45.00 kHz; fV 60 Hz,
720 (750)/60p:
fH 37.50 kHz; fV 50 Hz,
720 (750)/50p:
fH 33.75 kHz; fV 60 Hz,
1080 (1125)/60i:
fH 28.13 kHz; fV 50 Hz,
1080 (1125)/50i:
1080 (1125)/25p: fH 28.13 kHz; fV 25 Hz,
1080 (1125)/24p: fH 27.00 kHz; fV 24 Hz,
1080 (1125)/24sF: fH 27.00 kHz; fV 48 Hz,
1080 (1125)/30p: fH 33.75 kHz; fV 30 Hz,
1080 (1125)/60p: fH 67.50 kHz; fV 60 Hz,
1080 (1125)/50p: fH 56.25 kHz; fV 50 Hz
fH: 15.73 kHz, fV: 59.94 Hz [NTSC/NTSC4.43/PAL-M/PAL60]
fH: 15.63 kHz, fV: 50 Hz [PAL/PAL-N/SECAM]
Vertical: ±50%* (powered), horizontal: ±10% (powered)
*±35% with the ET-ELW22.
NOTE: Optical axis shift function cannot be operated when used with the ET-ELW21.
Keystone correction range
Installation
Built-in speaker
As of August 2014
SFL14M020
Size
Output power
Vertical: ±40° (with vertical correction only)
Horizontal: ±30° (with horizontal correction only)
Ceiling/floor, front/rear
3.7 cm (1-15/32 inches) (round) × 1
10 W (monaural)
2/16
PT-EX510/EX510L
LCD Projectors
Terminals
HDMI IN
DVI-D IN
RGB1 IN
R, G, B
Y, PB (CB), PR (CR)
HDMI 19-pin × 1, Deep Color, HDCP compatible
480i(525i)*3, 576i(625i)*3, 480p(525p), 576p(625p), 720(750)/60p,
720(750)50p, 1080(1125)/60i, 1080(1125)/50i, 1080(1125)/25p,
1080(1125)/24p, 1080(1125)/24sF, 1080(1125)/30p, 1080(1125)/60p,
1080(1125)/50p
VGA (640 × 400)–WUXGA*4 (1,920 × 1,200)
Audio signal: linear PCM (sampling frequencies: 48 kHz, 44.1 kHz,
32 kHz)
DVI-D 24-pin × 1, DVI 1.0 compliant, compatible with HDCP, compatible with single link only
3
3
480i(525i)* , 576i(625i)* , 480p(525p), 576p(625p), 720(750)/60p,
720(750)50p, 1080(1125)/60i, 1080(1125)/50i, 1080(1125)/25p,
1080(1125)/24p, 1080(1125)/24sF, 1080(1125)/30p, 1080(1125)/60p,
1080(1125)/50p
VGA (640 × 400) – WUXGA* 4 (1,920 × 1,200)
D-sub HD 15-pin (female) × 1
R: 0.7 Vp-p, 75 ohms;
G: 0.7 Vp-p (1.0 Vp-p for sync on G), 75 ohms;
B: 0.7 Vp-p, 75 ohms;
HD/VD, SYNC: high impedance, TTL (positive/negative)
Y: 1.0 Vp-p (including sync signal);
PB (CB), PR (CR): 0.7 Vp-p, 75 ohms
NOTE: SYNC/HD and VD terminals do not accept tri-level sync signals.
RGB2 IN
R, G, B
BNC × 5 (RGB/YPBPR/YCBCR × 1)
R: 0.7 Vp-p, 75 ohms;
G: 0.7 Vp-p (1.0 Vp-p for sync on G), 75 ohms;
B: 0.7 Vp-p, 75 ohms;
HD/VD, SYNC: high impedance, TTL (positive/negative)
NOTE: SYNC/HD and VD terminals do not accept tri-level sync signals.
Y, PB (CB), PR (CR)
S-Video IN
VIDEO IN
MONITOR OUT
AUDIO IN
VARIABLE AUDIO OUT
SERIAL IN
REMOTE 1 IN
REMOTE 2 IN
LAN
Y: 1.0 Vp-p (including sync signal);
PB (CB), PR (CR): 0.7 Vp-p, 75 ohms
Y: 1.0 Vp-p; C: 0.286 Vp-p, 75 ohms
PIN Jack × 1, 1.0 Vp-p, 75 ohms
D-sub HD 15-pin (female) × 1
R: 0.7 Vp-p, 75 ohms;
G: 0.7 Vp-p (1.0 Vp-p for sync on G), 75 ohms;
B: 0.7 Vp-p, 75 ohms;
HD/VD, SYNC: high impedance, TTL (positive/negative)
Y: 1.0 Vp-p (including sync signal); PB (CB), PR (CR): 0.7 Vp-p, 75 ohms
M3 (L, R) × 1, 0.5 Vrms, input impedance: 22 kilohms or more
M3 (L, R) × 1, 0.5 Vrms, input impedance: 22 kilohms or more
PIN Jack (L, R) × 2, 0.5 Vrms, input impedance: 22 kilohms or more
M3 (L, R) × 1 (monitor out: 0 – 2.0 Vrms, variable)
D-sub 9-pin (female) × 1, for external control (RS-232C compliant)
M3 jack × 1 for wired remote control
D-sub 9-pin (female) × 1, for external control (parallel)
RJ-45 × 1 for network and 10Base-T, 100Base-TX, compliant with
PJLink™ (class 1), Deep Color, compatible with HDCP,
480i(525i)*3, 576i(625i)*3, 480p(525p), 576p(625p), 720(750)/60p,
720(750)50p, 1080(1125)/60i, 1080(1125)/50i, 1080(1125)/25p,
1080(1125)/24p, 1080(1125)/24sF, 1080(1125)/30p, 1080(1125)/60p,
1080(1125)/50p
VGA (640 × 400) – WUXGA*4 (1,920 × 1,200),
dot clock: 25 MHz –162 MHz
NOTE: Compatible with non-interlaced signals only.
As of August 2014
SFL14M020
3/16
PT-EX510/EX510L
LCD Projectors
Power cord length
Cabinet materials
Dimensions (W × H × D)
PT-EX510
PT-EX510L
Weight*
6
PT-EX510
PT-EX510L
Operation noise* 2
Operating temperature
Operating humidity
Remote control unit
Power supply
Operation range* 8
Dimensions (W × H × D)
Weight
3.0 m (9 ft 10 in)
Molded plastic
530 × 177* 5 × 445 mm
(20-7/8 × 6-31/32 * 5 × 17-17/32 inches) (with supplied lens)
530 × 177* 5 × 385 mm
(20-7/8 × 6-31/32 * 5 × 15-5/32 inches) (without lens)
Approx. 10.6 kg (23.4 lbs) (with supplied lens)
Approx. 9.8 kg (21.6 lbs) (without lens)
35 dB (LAMP POWER: NORMAL),
29 dB (LAMP POWER: ECO)
0–45 °C*7 (32–113 °F)*7
10%– 80% (no condensation)
3 V DC (R03/LR03/AAA type battery × 2)
Approx. 30 m (98 ft 5 in) when operated from directly in front of the
signal receptor
48 × 145 × 27 mm (1-7/8 × 5-23/32 × 1-1/16 inches)
Approx. 102 g (3.6 oz) (including batteries)
Supplied accessories
Power cord (including power cord holder) (× 1)
Wireless/wireled remote control unit (× 1)
Batteries for remote control (AAA/R03/LR03 type × 2)
Software CD-ROM (Logo Transfer Software, Multi Projector Monitoring
& Control Software) (× 1)
Optional accessories
Fixed-focus lens (0.8:1)
Short throw zoom lens ( 0.78-0.98:1 WUXGA /
0.78-0.98:1 WXGA /
0.8-1.0:1 XGA)
Zoom lens (1.3–1.7:1)
Zoom lens (2.8– 4.6:1)
Zoom lens (4.6 – 7.2:1)
Ceiling mount bracket
Bracket assembly
Replacement lamp unit
Replacement filter unit
ET-ELW21
ET-ELW22
ET-ELW20
ET-ELT20
ET-ELT21
ET-PKD120H (for high ceilings)
ET-PKD120S (for low ceilings)
ET-PKE300B (for ET-PKD120H/PKD120S)
ET-PKE200B*9
ET-LAE300
ET-RFE300
Weights and dimensions shown are approximate. Specifications and appearance are subject to change without notice.
* 1 When the standby mode is set to eco, network functions such as power on over the LAN network will not operate, and the serial output terminal cannot be used. Also, only certain commands can be received for external control using the serial terminal. Only Taiwan model, 0.15 W.
* 2 Measurement, measuring conditions, and method of notation all comply with ISO 21118 international standards.
* 3 Only compatible with dot clock frequency of 27 MHz (pixel repetition signal)
* 4 WUXGA resolution is supported only when the signals are compliant with VESA CVT-RB (Coordinated Video Timing-Reduced Blanking).
* 5 With legs at shortest position.
* 6 Average value. May differ depending on models.
* 7 The operating temperature range is 0 °C to 40 °C (32 °F to 104 °F) when used at altitudes between 1,400 m and 2,700 m (4,593 ft to 8,858 ft) above
sea level. When operating temperature exceeds 40 °C (35 °C at high altitude), lamp power may automatically switch to ECO in order to protect
the projector.
* 8 Operation range differs depending on environments.
* 9 If the ceiling mount bracket of the ET-PKE200H or ET-PKE200S has already been installed, use the projector attachment for the ET-PKE200B.
As of August 2014
SFL14M020
4/16
PT-EX510/EX510L
LCD Projectors
385 (15-5/32)
445 (17-17/32)
Dimensions
80
(3-5/32)
17
530
(20-7/8)
(21/32)
160 (6-5/16)
177 (6-31/32)
60
(2-3/8)
unit : mm (inch)
NOTE: This illustration is not drawn to scale.
The illustration shows the PT-EX510.
Terminals
1
2
3
4
7
8
9
10
11
As of August 2014
SFL14M020
12 13
14
5
6
1
LAN
2
HDMI input
3
MONITOR output
4
RGB1 input
5
RGB2 input
6
BVI-D input
7
Video input
8
Audio 1 input
9
Audio 2 input
10
Audio 3 input
11
Remote 1 input
12
Audio output
13
Serial input
14
Remote 2 input
5/16
PT-EX510/EX510L
LCD Projectors
352– 432*2
( 1 3-27/32–17)*2
443– 523*2
( 1 7-7/16–20-19/32)*2
Standard setting-up position
ø 60.5
( 2-3/8 )
*2 Adjustable in 40 mm (1-9/16 in) steps.
H
Upper edge of projected image
*1 When the lens protrudes to the maximum.
A: 50 mm (1-31/32 in) with the ET-ELW21
95 mm (3-3/4 in) with the ET-ELW22
79.5 mm (3-1/8 in) with the ET-ELW20
60 mm (2-3/8 in) with the supplied lens
84 mm (3-5/16 in) with the ET-ELT20
80 mm (3-5/32 in) with the ET-ELT21
L
A*1
Projected image
190
195
(7-15/32) (7-11/16)
H
L
NOTE:
Illustrations show the projector
i nstalled using optional ceiling mount
bracket ET-PKD120H and bracket assembly
ET-PKE300B.
Lower edge of projected image
200
(7-7/8)
100
( 3 -15/16)
This illustration is not drawn to scale.
L
100
( 3 -15/16)
100
( 3 -15/16)
Projected image
200
(7-7/8)
100
( 3 -15/16)
unit : mm (inch)
Caution:
• All construction work should be done by a qualified technician.
• When mounting to the ceiling, use the special mounting bracket. To prevent the projector from swaying or dropping, attach the wire between the mounting bracket and the ceiling.
As of August 2014
SFL14M020
6/16
PT-EX510/EX510L
LCD Projectors
Projection distance for 4:3 aspect ratio screen
Unit: meters
Screen size
(diagonal)
[m]
[in]
Distance to screen (L)
Fixed-focus
ET-ELW21
Fixed-focus
lens
Height from the edge
of screen to
center of lens (H)
Zoom
min.
max.
min.
max.
min.
max.
min.
max
min.
FixedZoom
focus
lenses
lens ET-ELW22
max. ET-ELW21
ET-ELW22
Zoom lens
ET-ELW20
Zoom lens
Supplied lens
ET-ELT20
Zoom lens
ET-ELT21
Zoom lens
Zoom
lenses
1.02 / 40
0.60
–
–
0.97
1.35
1.30
2.26
2.19
3.65
3.56
5.78
0.30
–
0.00 – 0.61
1.27 / 50
0.77
–
–
1.23
1.70
1.64
2.83
2.77
4.59
4.50
7.27
0.38
–
0.00 – 0.76
1.52 / 60
0.93
0.97
1.21
1.49
2.05
1.98
3.41
3.34
5.53
5.44
8.77
0.46
0.14–0.78 0.00 – 0.91
1.78 / 70
1.10
1.14
1.42
1.74
2.40
2.32
3.98
3.92
6.47
6.38 10.27
0.53
0.16–0.91 0.00 – 1.07
2.03 / 80
1.26
1.30
1.63
2.00
2.75
2.66
4.56
4.50
7.41
7.32 11.77
0.61
0.18–1.04 0.00 – 1.22
2.29 / 90
1.43
1.47
1.84
2.26
3.10
3.00
5.14
5.07
8.35
8.27 13.26
0.69
0.21–1.17 0.00 – 1.37
2.54 / 100
1.59
1.64
2.05
2.51
3.45
3.33
5.71
5.65
9.29
9.21 14.76
0.76
0.23–1.30 0.00 – 1.52
3.05 / 120
1.92
1.98
2.47
3.03
4.15
4.01
6.86
6.80 11.17
11.09 17.75
0.91
0.27–1.55 0.00 – 1.83
3.81 / 150
2.42
2.49
3.10
3.80
5.20
5.03
8.59
8.53 14.00
13.92 22.24
1.14
0.34–1.94 0.00 – 2.29
5.08 / 200
3.24
3.33
4.15
5.08
6.95
6.72 11.47
11.41 18.70
18.63 29.73
1.52
0.46–2.59 0.00 – 3.05
6.35 / 250
4.07
4.18
5.19
6.37
8.70
8.42 14.35
14.30 23.40
23.34 37.21
1.91
0.57–3.24 0.00 – 3.81
7.62 / 300
4.89
5.02
6.24
7.65 10.45
10.11 17.23
17.18 28.11
28.05 44.70
2.29
0.69–3.89 0.00 – 4.57
8.89 / 350
5.72
5.87
7.29
8.94 12.20
11.81 20.11
20.06 32.81
32.76 52.18
2.67
0.80–4.53 0.00 – 5.33
10.16 / 400
6.54
6.71
8.34
10.22 13.95
13.50 22.99
22.94 37.51
37.47 59.67
3.05
0.91–5.18 0.00 – 6.10
Unit: feet
Screen size
(diagonal)
[m]
[in]
Distance to screen (L)
Fixed-focus
ET-ELW21
Fixed-focus
lens
Height from the edge
of screen to
center of lens (H)
Zoom
min.
max.
min.
max.
min.
max.
min.
max
min.
FixedZoom
focus
lenses
lens
ET-ELW22
max. ET-ELW21
ET-ELW22
Zoom lens
ET-ELW20
Zoom lens
Supplied lens
ET-ELT20
Zoom lens
ET-ELT21
Zoom lens
Zoom
lenses
1.02 / 40
2.0
–
–
3.2
4.4
4.3
7.4
7.2
12.0
11.7
19.0
1.0
–
0.0 – 2.0
1.27 / 50
2.5
–
–
4.0
5.6
5.4
9.3
9.1
15.1
14.8
23.9
1.3
–
0.0 – 2.5
1.52 / 60
3.1
3.2
4.0
4.9
6.7
6.5
11.2
11.0
18.1
17.8
28.8
1.5
0.4–2.5
0.0 – 3.0
1.78 / 70
3.6
3.7
4.7
5.7
7.9
7.6
13.1
12.9
21.2
20.9
33.7
1.8
0.5–3.0
0.0 – 3.5
2.03 / 80
4.1
4.3
5.4
6.6
9.0
8.7
15.0
14.8
24.3
24.0
38.6
2.0
0.6–3.4
0.0 – 4.0
2.29 / 90
4.7
4.8
6.0
7.4
10.2
9.8
16.9
16.6
27.4
27.1
43.5
2.3
0.7–3.8
0.0 – 4.5
2.54 / 100
5.2
5.4
6.7
8.2
11.3
10.9
18.7
18.5
30.5
30.2
48.4
2.5
0.8–4.2
0.0 – 5.0
3.05 / 120
6.3
6.5
8.1
9.9
13.6
13.2
22.5
22.3
36.7
36.4
58.2
3.0
0.9–5.1
0.0 – 6.0
3.81 / 150
7.9
8.2
10.2
12.5
17.0
16.5
28.2
28.0
45.9
45.7
73.0
3.8
1.1–6.4
0.0 – 7.5
5.08 / 200
10.6
10.9
13.6
16.7
22.8
22.1
37.6
37.4
61.3
61.1
97.5
5.0
1.5–8.5
0.0 – 10.0
6.35 / 250
13.3
13.7
17.0
20.9
28.5
27.6
47.1
46.9
76.8
76.6 122.1
6.3
1.9–10.6
0.0 – 12.5
7.62 / 300
16.0
16.5
20.5
25.1
34.3
33.2
56.5
56.4
92.2
92.0 146.7
7.5
2.3–12.7
0.0 – 15.0
8.89 / 350
18.8
19.3
23.9
29.3
40.0
38.7
66.0
65.8 107.6
107.5 171.2
8.8
2.6–14.9
0.0 – 17.5
10.16 / 400
21.5
22.0
27.4
33.5
45.8
44.3
75.4
75.3 123.1
122.9 195.8
10.0
3.0–17.0
0.0 – 20.0
• The value for L (distance to screen) varies slightly within ±5% depending on the zoom lens characteristics.
• The zoom lens characteristics may cause slight image distortion.
• When vertical keystone correction is used, the image is corrected in the direction that reduces its projected size.
• The brightness varies depending on the zoom setting.
Note: When the fixed-focus lens ET-ELW21 is mounted, the optical lens shift function cannot be used.
As of August 2014
SFL14M020
7/16
PT-EX510/EX510L
LCD Projectors
Calculation of the projection distance
For a screen size different from the above, use the equation below to calculate the projection distance.
Aspect ratio 4:3
ET-ELW21
(fixed focus)
L (m) = (diagonal screen size in inches) × 0.16500 - 0.058500
ET-ELW22
minimum
maximum
L (m) = (diagonal screen size in inches) × 0.01691 - 0.04888
L (m) = (diagonal screen size in inches) × 0.02096 - 0.04577
ET-ELW20
minimum
maximum
L (m) = (diagonal screen size in inches) × 0.02570 - 0.05580
L (m) = (diagonal screen size in inches) × 0.03500 - 0.05400
Supplied lens
minimum
maximum
L (m) = (diagonal screen size in inches) × 0.03390 - 0.05530
L (m) = (diagonal screen size in inches) × 0.05760 - 0.04800
ET-ELT20
minimum
maximum
L (m) = (diagonal screen size in inches) × 0.05764 - 0.11420
L (m) = (diagonal screen size in inches) × 0.09406 - 0.11290
ET-ELT21
minimum
L (m) = (diagonal screen size in inches) × 0.09421 - 0.21320
maximum
L (m) = (diagonal screen size in inches) × 0.14970 - 0.21090
• Distances calculated with the above equations will include a slight error.
As of August 2014
SFL14M020
8/16
PT-EX510/EX510L
LCD Projectors
Shift range
Optical axis shift function *1 allows to shift the position of a projected image as shown below.
H
(Width of
projected image)
0.1H
Standard postition
of projected image
0.5V*2
V
(Height of
projected image)
0.5V*2
0.1H
*1 The ET-ELW21 is a fixed short-focus lens. Therefore, the lens shift function provided in the main unit cannot be used.
*2 0.35V with the ET-ELW22.
Installable angle
Install the projector at an angle within the range shown below.
• Horizontal direction
The projector may be installed at a horizontal
angle of ±15°.
-15°
+15°
360
°
• Vertical direction
The projector may be installed at a vertical
angle of 360°.
As of August 2014
SFL14M020
9/16
PT-EX510/EX510L
LCD Projectors
List of compatible signals
The signals that can be input to this projector are shown in the table below. Horizontal scanning frequencies of 15 kHz to 100 kHz, vertical scanning frequencies of 24 Hz to 120 Hz, and a dot clock of
162 MHz maximum can be input.
NOTE:
The native resolution of this projector is 1,024 × 768 pixels. If the display resolution of the input signal is different from the
native resolution, image compression or expansion will be used to convert the input signal to a level within the native resolution.
Display mode
Display
resolution
(dots)* 1
NTSC/NTSC4.43/PAL-M/PAL60
720 × 480i
PAL/PAL-N/SECAM
720 × 576i
525i (480i)
640 × 480i
625i (576i)
768 × 576i
525i (480i)
720(1440) × 480i* 2
625i (576i)
720(1440) × 576i* 2
525p (480p)
720 × 480i
625p (576p)
720 × 576i
750 (720)/60p
1280 × 720
750 (720)/50p
1125 (1080)/60i* 3
1920 × 1080i
1125 (1080)/50i
1920 × 1080
1125 (1080)/25p
1125 (1080)/24p
1125 (1080)/24sF
1125 (1080)/30p
1125 (1080)/60p
1125 (1080)/50p
VESA400
640 × 400
640 × 400
VGA
640 × 480
SVGA
MAC16
XGA
800 × 600
832 × 624
1024 × 768
Scanning frequency
H
V
(kHz)
(kHz)
Dot clock
frequency
(MHz)
15.7
15.6
15.7
59.9
50.0
59.9
−
−
13.5
15.6
15.7
15.6
31.5
50.0
59.9
50.0
60.0
13.5
27.0
31.3
45.0
37.5
33.8
28.1
28.1
50.0
60.0
50.0
60.0
50.0
25.0
24.0
48.0
30.0
27.0
74.3
74.3
27.0
27.0
33.8
27.0
27.0
67.5
60.0
50.0
85.1
70.1
59.9
66.7
75.0
72.8
85.0
56.3
148.5
148.5
31.5
25.2
25.2
30.2
31.5
31.5
36.0
36.0
37.9
46.9
60.3
75.0
40.0
49.5
48.1
53.7
49.7
39.6
72.2
85.1
74.6
50.0
50.0
56.3
57.3
51.9
48.4
56.5
60.0
65.5
60.0
70.1
75.0
81.6
65.0
75.0
78.8
86.0
85.0
100.0
120.0
60.0
70.0
74.9
85.0
94.5
113.3
139.1
81.6
94.2
108.0
119.7
75.1
100.0
MXGA
1152 × 864
MAC21
1152 × 870
68.7
VIDEO/S-VIDEO
YC BCR/RGB
HDMI/DVI-D
HDMI/DVI-D/
YP BPR/RGB
74.3
74.3
74.3
74.3
74.3
74.3
56.3
37.9
31.5
31.5
35.0
37.5
37.9
43.3
35.2
68.7
81.4
98.8
53.7
64.0
67.5
77.1
Format
HDMI/DVI-D/RGB
* 1 The “i” appearing after the resolution indicates an interlaced signal.
* 2 Only compatible with dot clock frequency of 27 MHz (pixel repetition signal)
* 3 Compliant with VESA CVT-RB (Coordinated Video Timing-Reduced Blanking).
As of August 2014
SFL14M020
10/16
PT-EX510/EX510L
LCD Projectors
Display mode
Display
resolution
(dots)* 1
1280 × 720
1280 × 720
1280 × 768
1280 × 800
1366×768
Format
HDMI/DVI-D/RGB
1280 × 768
49.8
59.9
100.0
120.0
49.9
60.5
74.5
131.8
161.6
65.3
1280 × 768 * 2
47.4
60.0
68.3
1280 × 768
47.8
60.3
68.6
41.3
49.3
59.9
74.9
84.8
50.0
59.9
79.5
102.3
117.5
68.6
71.0
49.7
62.8
71.6
60.0
52.4
64.0
72.3
78.2
80.0
91.1
39.6
47.7
54.1
64.0
65.2
65.3
78.8
82.2
59.8
74.9
84.9
60.0
50.0
60.0
66.3
72.0
75.0
85.0
49.9
59.8
50.0
60.0
60.0
60.0
72.0
75.0
83.5
106.5
122.5
108.0
88.0
108.0
125.0
135.1
135.0
157.5
69.0
85.5
99.9
108.2
122.6
121.8
149.3
155.9
59.9
50.0
60.0
60.0
50.0
106.5
97.0
119.0
162.0
119.5
60.0
49.9
59.9
60.0
49.9
60.0
59.9
146.3
141.5
138.5
173.0
158.3
154.0
193.3
1280 × 800
1280 × 960
1280 × 1024
1366 × 768
SXGA+
1400 × 1050
WXGA+
1440 × 900
UXGA60
WSXGA+
1600 × 1200
1680 × 1050
55.9
46.3
55.9
75.0
54.1
1920×1080
1920
1920
1920
1920
1920
1920
65.3
55.6
66.6
67.2
61.8
74.0
74.6
1600×900
WUXGA
Dot clock
frequency
(MHz)
37.1
44.8
76.3
92.6
39.6
1280 × 800 * 2
1280 × 800
MSXGA
SXGA
Scanning frequency
H
V
(kHz)
(kHz)
×
×
×
×
×
×
1080
1080* 2
1080* 3
1200
1200* 2
1080* 3
RGB
HDMI/DVI-D/RGB
RGB
* 1 The “i” appearing after the resolution indicates an interlaced signal.
* 2 Compliant with VESA CVT-RB (Coordinated Video Timing-Reduced Blanking).
* 3 The image processing circuit reduces the number of pixels to display images.
As of August 2014
SFL14M020
11/16
PT-EX510/EX510L
LCD Projectors
Serial connector
The serial connector complies with RS-232C. To control the projector from a personal computer, commands must be input through communication software, based on the format and satisfying the communication conditions shown below.
Pin assignments and signal names
6
No.
1
2
3
4
5
9
1
5
Signal name
–
TXD
RXD
–
GND
Description
NC
Transmitted data
Received data
Connected internally
Ground
No.
6
7
8
9
Signal name
–
CTS
RTS
–
Description
NC
Connected internally
Connected internally
NC
D-sub 9-pin (female) Serial input
Communication conditions (factory setting)
Signal level
Synchronization method
Baud rate
Parity
Character length
Stop bit
X parameter
S parameter
RS-232C-compliant
Start-stop synchronization
9,600 bps
None
8 bits
1 bit
None
None
Basic format
Transmission from the computer begins with STX, then the ID, command, parameter, and ETX are sent
in this order. Add parameters according to the details of control.
STX
A
D
I1 I2
;
C1 C2 C3
Start
(2 byte)
Semicolon
(1 byte)
(1 byte)
ID: 2 characters
(2 bytes)
01 to 64: Address number
:
Colon
(1 byte)
P1 P2 ... Pn
ETX
End
(1 byte)
Parameters
(undefined length)
Command
(3 bytes)
(Control and/or query commands)
ID designator
CAUTION
• It may not be possible to send or receive commands for about 10 to 60 seconds when the lamp is first turned on. If this occurs, wait for 60 seconds, then try sending or receiving again.
• When sending multiple commands, be sure to wait for at least 0.5 second after receiving a response from the projector before sending the next
command.
• Additional time is sometimes required for response due to processing inside the projector. Set the time-out period for command response to 10
seconds or more.
• When using two or more units, set different IDs for each unit.
As of August 2014
SFL14M020
12/16
PT-EX510/EX510L
LCD Projectors
Cable specifications
Control commands
*
Command : Parameter
Function
PON
POF
OSH:0
OSH:1
IIS:HD1
IIS:DVI
IIS:RG1
IIS:RG2
IIS:VID
VXX:RYC2=+00 000
VXX:RYC2=+00 001
VXX:RYC2=+00 002
VXX:LPWI1=+0 0030
VXX:LPWI1=+0 0001
VXX:LPWI1=+0 0000
OAS
VSE:0
VSE:1
VSE:2
VSE:5
VSE:6
VSE:9
VSE:10
VPM:NAT
VPM:STD
VPM:DYN
VPM:CIN
VPM:DIC
Standby power
Shutter
Input selection
RGB2 INPUT SETTING
Lamp power
Callback
On
Off
Off
On
HDMI
DVI-D
RGB1
RGB2
Video
RGB/YPBPR
S-Video
Video
Auto
Normal
Eco
Auto setup
Aspect
Picture
Normal/Auto/VID Auto
4:3
Wide
Real
Full
H-fits
V-fits
Natural
Standard
Dynamic
Cinema
DICOM Simulation
PON
POF
OSH:0
OSH:1
IIS:HD1
IIS:DVI
IIS:RG1
IIS:RG2
IIS:VID
VXX:RYC2=+00 0 0 0
VXX:RYC2=+00 0 0 1
VXX:RYC2=+00 0 0 2
VXX:LPWI1=+0 0 0 3 0
VXX:LPWI1=+0 0 0 0 1
VXX:LPWI1=+0 0 0 0 0
OAS
VSE:0
VSE:1
VSE:2
VSE:5
VSE:6
VSE:9
VSE:10
VPM:NAT
VPM:STD
VPM:DYN
VPM:CIN
VPM:DIC
Do not send PON, POF or OSH commands continuously in a short period of time. Doing so may burst the lamp or shorten the lamp replacement
cycle.
*
When a command that cannot be executed during standby mode is sent, the projector will send an ER401 command in reply.
As of August 2014
SFL14M020
13/16
PT-EX510/EX510L
LCD Projectors
Status request commands
Command : Parameter
QPW
Function
Main power status
QSH
Shutter function status
QIN
Input signal status
QVX:LPWI1
Lamp power mode status
QSE
Aspect mode status
QPM
Picture mode status
QST
Q$L:1
QTM:0
QTM:1
Projector run time
Lamp run time
Temperature status
Callback
000
001
0
1
HD1
DVI
RG1
RG2
VID
VXX:LPWI1=+00030
VXX:LPWI1=+00001
VXX:LPWI1=+00000
0
1
2
5
6
9
10
NAT
STD
DYN
CIN
DIC
p1p2p3p4p5
p1p2p3p4
p1p2p3p4/p5p6p7p8*1
p1p2p3p4/p5p6p7p8*1
Description
Off
On
Off
On
HDMI
DVI-D
RGB1
RGB2
Video
Auto
Normal
Eco
Normal/Auto/VID Auto
4:3
Wide
Real
Full
H fit
V fit
Natural mode
Standard mode
Dynamic mode
Cinema mode
DICOM Simulation.mode
00000 – 99999 hours
0000 – 9999 hours
Air intake
Exhaust
* 1 p1p2p3p4 = Celsius (°C), p5p6p7p8 = Fahrenheit (°F)
NOTE: If a wrong command is received, the projector will send an ER401 or ER402 command to the computer.
Command example
To set the shutter function on, send the command as shown below.
STX
ADZZ ;
OSH
:
1
ETX
NOTE: When sending commands without parameters, a colon (:) is not necessary.
As of August 2014
SFL14M020
14/16
PT-EX510/EX510L
LCD Projectors
Notes on projector placement and operation
The projector uses a high-wattage lamp that becomes very hot during operation. Please observe the
following precautions.
1.
Never place objects on top of the projector.
2.
Make sure there is an unobstructed space of 1,000 mm (3 feet 3 inches) or more around the projector’s exhaust openings.
3.
Do not stack projector units directly on top of one another for the purpose of multiple (stacked)
projection. When stacking projector units, be sure to provide the amount of space indicated below
between them. These space requirements also apply to installations where only one projector unit
is operating at one time and the other unit is used as a backup.
4.
Make sure that nothing blocks the projector’s air intake and exhaust openings. Also, install the projector so that cool or hot air from other air conditioning equipment does not flow directly toward
the projector’s air intake or exhaust openings.
5.
Do not install the projector in an enclosed space. If it is necessary to install it in an enclosed
space, add a separate ventilation system. If ventilation is insufficient, hot air will accumulate at the
intake opening. This may cause the projector’s protective circuit to interrupt projector operation.
6.
If the projector is installed in an enclosed space, ensure that the projector’s intake and exhaust
openings are not blocked. Take particular care to ensure that hot air from the exhaust openings is
not sucked into the intake openings.
7.
When installing the projector in any manner other than floor mounting with the adjuster legs, use
the four threaded ceiling mount holes (screw diameter: M6, projector interior thread length: 12 mm)
to secure the projector.
1000
0 mm
(3 ft 3 in)
or more
500 mm
(1 ft 8 in)
or more
1000
0 mm
(3 ft 3 in)
or more
100 mm
(4 in)
or more
Do not stack projector
units directly on top of
one another.
As of August 2014
SFL14M020
15/16
LCD Projectors
PT-EX510/EX510L
Direction of air intake and exhaust
Intake
Exhaust
Operating the projector continuously
1.
If the projector is to be operated continuously 12 hours or more, lamp replacement cycle duration
becomes shorter.
2.
The lamp replacement cycle duration becomes shorter if the projector is operated repeatedly for short
periods.
Weights and dimensions shown are approximate. Specifications and appearance are subject to change without notice.
Product availability differs depending on region and country. This product may be subject to export control regulations.
HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.
P JLink is a registered trademark, or a trademark application has been filed, in Japan, the United States, and other countries and regions.
All other trademarks are the property of their respective trademark owners.
As of August 2014
SFL14M020
16/16
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising