We thank you for your purchasing this amplifier system.Before
you use your new amplifier system, please read the manual book
thoroughly and carefully.
Please keep this instruction book in a safe place after reading for
future reference.
To prevent fire or shock hazard, do not expose the unit to rain or moisture.
Dangerously high voltages are present inside the unit. Do not open the casing
of the unit. Refer servicing to qualified personnel only.
Recharge the built-in 12V DC rechargeable battery before any use of the unit.
To prevent the rechargeable battery from being damaged, make sure that the
power ON/OFF switch of the PA system is turned off after each use.
Basic Features of the Amplifier system
All in one design for easy carrying and portable use.
Uni-directional Lavalier microphone with high sensitivity for clear voice
transmission and receiving.
Quartz stabilizer for carrier frequency transmission to avoid interference.
The system works on both AC and DC.You can also use the built in rechargeable
battery or with car cigarette lighter power for 12V DC.(The power cord for car
is not included, call Pyle 718-535-1800 for optional purchase)
Amplifier operates on the VHF band and there are 98 different possible channels
ready for max a group of 98 amplifiers working together at the same place and
the same time.
SMT technology and SMD electronic components used in building this amplifier,
are very high quality, operate very stable and will last a long time.
3 styles of microphones are good for different purposes. You can use the
handheld mic, headset mic and Lavalier mic
Tone control.
Wired/wieless microphone
Aux input for connecting to MD/CD etc.
9V common battery or 8.4V rechargeable battery can
be used in the wireless handheld microphone and the
wireless transmitter.
FM Radio Function.
The usage of the amplifier system
This unique designed amplifier speaker system with microphone is perfect for
the followimg applications.
Used as lecturing amplifier indoor or outdoor.(Especially for dancing and gym
A perfect address delivery system for in and outdoor meetings, tourism and
It is a good amplifier for interpretation, class teaching and commercial vendor
You can be heard from afar with clear sound quality and dependable
Classroom teaching
The system descriptions:
Options of accessories
Power ON/OFF
& Charge
Wireless RF LED
Built-in battery
Lavalier Microphone
Aux input
Charge mode LED 12-18V DC input
61/2 "
Wireless microphone
volume control
PWMA200/PWMA100 Single channel main frame
(With Built-in Rechargeable battery)
Audio Output
Wired Mic Input
status LED
Wired microphone
volume control
Radio Tuning FM
Headset Microphone
Belt Pack Transmitter
Belt Pack Transmitter
Headset Microphone
9V battery
Wired Microphone
PWMA200/PMWA100 Single channel MAIN
FRAME(Built-in Rechargeable
battery and with FM)
Handheld Wireless MIC
Noise or unit stops abruptly
(single channel main frame) standard match
1. Check the battery to see if it has a low charge.
2. Built-in battery low, please use AC power instead to power the system.
3. Check the cable connection to the speaker. The cable might be broken after
extended use.
4. Possible frequency interference with local transmission. Please contact the
dealer to change channels for better reception.
1. One Amplified Speaker Unit
2. One Piece of Lavalier Wireless MIC with Transmitter
3. One Headset MIC.
4.Wired Microphone
No voice heard
Note: 1.Lavalier or handheld wireless microphones not available
with all models
1. The resiever or transmitter is not turned on, please check all power source
and make sure they are all on.
2. The volume control knobs are turned to lowest level. Make sure they are
2.Two same channel microphones will not work at the same
time on a single channel receiver.
3. Lavaliere cables are broken after extended use.
Take out the 9V battery to avoid
acid damaging the components of
Operation of the system
the transmitter if you are not going
to use it for a long period of time.
System operation on AC Power
1. Plug in the AC power cord into your AC wall outlet. Make sure you
are using the correct voltage when you plug in the system to AC
2. Switch the main power ON, the LED on the panel will be lit. After using the
system, make sure to turn the main power off to avoid the damaging battery .
3. When you disconnect the AC power, the built-in battery will power the system
on DC voltage no delay.
4. Fully extend the telescoping antenna to achieve the best wireless reception
range of the wireless MIC, or to get the best result from radio. If the main receiver
receives strong interferences on the same frequency as the microphone or FM
channel you will experience noise or static interruption. At this time, adjust
Warning: Don't dismantle this product.
The maintenance and inspection should
be carried out by a qualified technician
to avoid the risk of electric shock and
damaging the components.
Technical specifications
AC 110V 50Hz;DC 12V/1.2AH
(built-in rechargeable battery;)
External DC power:
16CM, 10W/4¦
Frequency Range:
VHF 160-270MHz
10dB/¦V (S/N:>60dB)
Oscillationg Mode:
¡0.005% quartz control phase locked
Wireless effective range: UP TO 100FT
180 X 300 X 100MM
Peak power:
80W max
Output power:
the antenna to reduce or delete the interference.
5. Adjust the Volume with the control knob to get the desired level.
We reserve the right of change to technology and specifications of our products
without notice in advance.
5. Be careful to adjust the main control of the transmitter, start from lowest volume
and slowly turn it to a appropriate level to hear your voice clearlywithout feed
back. The system is ready to use.
6. After use, you have to take the battery out of the transmitter to avoid battery
leaking to damage the transmitter.
Power LED
Power switch
MIC port
You can get better reception
and sound from the
microphone if there is
little distance between the
microphone and your
9V battery Chamber
Lavalier Wireless transmitter
Belt pack style
Lavalier Wireless MIC
Headset MIC
1. Open the battery cover.
2. Put the battery into the compartment and
make sure you have a right polarity before
you use it.
3. Turn the switch to ON and you can use the
4. Please take the battery out if you are not going
to use it for a period of time.
MIC. net head
How to connect recording system
to the amplifier system
Wireless receiving
Input music volume control
Connect the cable of the CD/Mp3 etc into the Aux
Input Jack and the sound will amplify.
Adjust the volume depending on your requirement.
Don't put the microphone directiy towards
the horn of the main receiver in near distance,
or it will occur screaming feedback.
How to adjust the volume
The speaker volume control will adjust the amplifier volume to your desired level.
Units of the same frequency cannot be used
You can not use several wireless microphones of the same frequency
at the same time.
9V Battery
How to adjust the TONE
You may turn the Tone knob to the best position for desired level.
How to use the Aux Input?
If the LED flashes, this shows the battery is good. If the
LED is on, it shows that the battery is low, you have to change
the battery before you can use the system. If the LED does not
flash and is not on, the battery is dead or polarities are wrong.
Just plug the microphone to the wired mic input jack,
you hear your voice immediately.
Plug the recording system into the
audio out and you can record while
using the amplifier system.
How to use the handheld Microphone(Optional)
Volume control
Wired receiving
How to use a wired microphone
Battery cover
How to change the 9V battery?
Open the battery compartment on the back of the system case.
Make sure you have the right polarities matched when changing battery.
Handheld wireless MIC
How to use Radio for Model PWMA200 (radio tuning
function not available on )
1. Turn the main power on, then adjust the speaker volume to a proper level.
2. Turn the FM radio to desired station. It covers 88-108 MHz.
3. Adjust the volume to a proper sound level.
You have to unplug the system from main power after each use.
Warning: Be sure to switch off the system’s power after use, otherwise
the battery will be over discharged and it can damage the Lead
Acid rechargeable battery and shorten the battery life
How to charge the battery built in?
1. It is recommended to charge the battery for first time use for 8 hours.
2. Turn the main switch to "Charge" and the built-in battery will be charged with a
consistent current and voltage.
3. The charging indicator will change from bright to dim while battery charging,
the LED will shut off when the battery is fully charged. When the battery is getting
low, you will hear a buzz rominder from the system, asking you to charge the
battery immediately. Recharge the battery over 8 hours before using the unit.
When battery has been charged over 8 hours, it can operate for 6 hours.
1. If the battery is over discharged, the LED will not work till the
battery is rejuvenated. When the voltage is less than 100V, the
"CHARGE LED" will not light. When the voltage is more than
120V, "CHARGE LED" will stay lit and function normal. You have
to charge the battery when the built-in alarm warns you to
charge the battery.
2. If you do not use system for 90 days, we recommend charging
the system every three months over 8 hours.
Trouble shooting
If you have any problem with the system, please check the main power and
batteries for microphone sets and the built in battery, If you are using
a new 9V battery, please make sure you have put it in a correct polarity.
For the following problems:
Screaming from the speaker
System works on DC power
1.Turn on the main switch to ON and the power LED will indicate the battery
works well.
2.You may use the car cigarette light power connector
to connect the car and the main receiver amp
12V DC
or use an external 12V DC power connector to
connect the main receiver amplifier and the external
12V battery to supply power source to the main
receiver amplifer.
Car 12V
Warning:After use ,please make sure to switch
the main power to OFF to avoid battery damage.
You will need to plug in AC power and recharge the internal battery
in the case of the occurrence of noises and interruption of voice
Warning: Be sure to switch off the system main power after use,otherwise
the battery will be over discharged and it can damage the Lead
Acid rechargeable battery and shorten the battery life
How to use the Lavalier Microphone
1. Please adjust the speaker volume to the minimum.
2. Adjust the transmitter volume control to a low level.
3. Change the speaker direction to avoid direct feedback.
4. Turn the TONE to the lowest level.
Please lower the volume to a level that no feedback can be heard.
1. Open the battery compartment by sliding off the cover.
2. Put the battery into the compartment with correct polarity,and close the cover.
3. Plug the Lavalier microphone part to the jack.
4. Switch on the power of the transmitter and when the LED shows,it is ready
to work.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF