Quick Start Guide of All-in-One Network Video Recorder
All-in-One Network Video Recorder
Quick Start Guide
UD.6L0202B2085A01
0
Quick Start Guide of All-in-One Network Video Recorder
TABLE OF CONTENTS
NVR Pre-Installation ....................................................................................................................................... 6
NVR Installation .............................................................................................................................................. 6
Sitting on the Horizontal Plane .................................................................................................................. 6
Fixing in the Vertical Plane ........................................................................................................................ 8
Front View ...................................................................................................................................................... 11
Rear View……………………………………………………………………………………………………...12
HDD Storage Calculation Chart ................................................................................................................... 13
Menu Operation ............................................................................................................................................. 14
Menu Structure ......................................................................................................................................... 14
Startup and Shutdown .............................................................................................................................. 14
Setting the Admin Password .................................................................................................................... 15
Login and Logout ..................................................................................................................................... 16
User Login ....................................................................................................................................... 16
User Logout ..................................................................................................................................... 16
Live View ................................................................................................................................................. 17
Adding IP Cameras .................................................................................................................................. 17
Recording ................................................................................................................................................. 19
Instant Recording ............................................................................................................................. 19
All-day Recording ............................................................................................................................ 19
Playback ................................................................................................................................................... 19
Backup ..................................................................................................................................................... 21
Advertising ............................................................................................................................................... 22
Accessing by Web Browser ............................................................................................................................ 23
Logging in ................................................................................................................................................ 23
Live View ................................................................................................................................................. 24
Recording ................................................................................................................................................. 25
Playback ................................................................................................................................................... 26
1
All-in-One Network Video Recorder Quick Start Guide
Quick Start Guide
COPYRIGHT ©2015 Hangzhou Hikvision Digital Technology Co., Ltd.
ALL RIGHTS RESERVED.
Any and all information, including, among others, wordings, pictures, graphs are the properties of Hangzhou
Hikvision Digital Technology Co., Ltd. or its subsidiaries (hereinafter referred to be “Hikvision”). This user manual (hereinafter referred to be “the Manual”) cannot be reproduced, changed, translated, or distributed, partially or wholly, by any means, without the prior written permission of Hikvision. Unless otherwise stipulated,
Hikvision does not make any warranties, guarantees or representations, express or implied, regarding to the
Manual.
About this Manual
This Manual is applicable to All-in-One NVR (Network Video Recorder).
The Manual includes instructions for using and managing the product. Pictures, charts, images and all other information hereinafter are for description and explanation only. The information contained in the Manual is subject to change, without notice, due to firmware updates or other reasons. Please find the latest version in the company website ( http://overseas.hikvision.com/en/ ).
Please use this user manual under the guidance of professionals.
Trademarks Acknowledgement
and other Hikvision’s trademarks and logos are the properties of Hikvision in various jurisdictions. Other trademarks and logos mentioned below are the properties of their respective owners.
Legal Disclaimer
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THE PRODUCT DESCRIBED, WITH
ITS HARDWARE, SOFTWARE AND FIRMWARE, IS PROVIDED “AS IS”, WITH ALL FAULTS AND
ERRORS, AND HIKVISION MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT
LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, FITNESS FOR A PARTICULAR
PURPOSE, AND NON-INFRINGEMENT OF THIRD PARTY. IN NO EVENT WILL HIKVISION, ITS
DIRECTORS, OFFICERS, EMPLOYEES, OR AGENTS BE LIABLE TO YOU FOR ANY SPECIAL,
CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG OTHERS,
DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA OR
DOCUMENTATION, IN CONNECTION WITH THE USE OF THIS PRODUCT, EVEN IF HIKVISION HAS
BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
REGARDING TO THE PRODUCT WITH INTERNET ACCESS, THE USE OF PRODUCT SHALL BE
WHOLLY AT YOUR OWN RISKS. HIKVISION SHALL NOT TAKE ANY RESPONSIBILITES FOR
ABNORMAL OPERATION, PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER
ATTACK, HACKER ATTACK, VIRUS INSPECTION, OR OTHER INTERNET SECURITY RISKS;
HOWEVER, HIKVISION WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED.
SURVEILLANCE LAWS VARY BY JURISDICTION. PLEASE CHECK ALL RELEVANT LAWS IN YOUR
JURISDICTION BEFORE USING THIS PRODUCT IN ORDER TO ENSURE THAT YOUR USE CONFORMS
THE APPLICABLE LAW. HIKVISION SHALL NOT BE LIABLE IN THE EVENT THAT THIS PRODUCT IS
USED WITH ILLEGITIMATE PURPOSES.
IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE
LATER PREVAILS.
2
All-in-One Network Video Recorder Quick Start Guide
Regulatory Information
FCC Information
FCC compliance: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.
FCC Conditions
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.
EU Conformity Statement
This product and - if applicable - the supplied accessories too are marked with "CE" and comply therefore with the applicable harmonized European standards listed under the EMC Directive
2004/108/EC, the RoHS Directive 2011/65/EU.
2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of as unsorted municipal waste in the European Union. For proper recycling, return this product to your local supplier upon the purchase of equivalent new equipment, or dispose of it at designated collection points. For more information see: www.recyclethis.info
2006/66/EC (battery directive): This product contains a battery that cannot be disposed of as unsorted municipal waste in the European Union. See the product documentation for specific battery information. The battery is marked with this symbol, which may include lettering to indicate cadmium (Cd), lead (Pb), or mercury (Hg). For proper recycling, return the battery to your supplier or to a designated collection point. For more information see: www.recyclethis.info
Industry Canada ICES-003 Compliance
This device meets the CAN ICES-3 (A)/NMB-3(A) standards requirements.
3
All-in-One Network Video Recorder Quick Start Guide
Safety Instruction
These instructions are intended to ensure that user can use the product correctly to avoid danger or property loss.
The precaution measure is divided into “Warnings” and “Cautions”
Warnings: Serious injury or death may occur if any of the warnings are neglected.
Cautions:
Injury or equipment damage may occur if any of the cautions are neglected.
Warnings Follow these safeguards to prevent serious injury or death.
Cautions
Follow these precautions to prevent potential injury or material damage.
Warnings
●
Proper configuration of all passwords and other security settings is the responsibility of the installer and/or end-user.
●
In the use of the product, you must be in strict compliance with the electrical safety regulations of the nation and region. Please refer to technical specifications for detailed information.
●
Input voltage should meet both the SELV (Safety Extra Low Voltage) and the Limited Power Source with
100~240 VAC or 12 VDC according to the IEC60950-1 standard. Please refer to technical specifications for detailed information.
●
Do not connect several devices to one power adapter as adapter overload may cause over-heating or a fire hazard.
●
Please make sure that the plug is firmly connected to the power socket.
●
If smoke, odor or noise rise from the device, turn off the power at once and unplug the power cable, and then please contact the service center.
4
All-in-One Network Video Recorder Quick Start Guide
Preventive and Cautionary Tips
Before connecting and operating your device, please be advised of the following tips:
•
Ensure unit is installed in a well-ventilated, dust-free environment.
•
Unit is designed for indoor use only.
•
Keep all liquids away from the device.
•
Ensure environmental conditions meet factory specifications.
•
Use the device in conjunction with an UPS if possible.
•
Power down the unit before connecting and disconnecting accessories and peripherals.
•
Improper use or replacement of the battery may result in hazard of explosion. Replace with the same or equivalent type only. Dispose of used batteries according to the instructions provided by the battery manufacturer.
5
All-in-One Network Video Recorder Quick Start Guide
Thank you for purchasing our product. If there is any question or request, please do not hesitate to contact dealer.
This manual is applicable to the model: DS-7600NI-E1/A.
NVR Pre-Installation
The NVR is highly advanced surveillance equipment that should be installed with care. Please take into consideration the following precautionary steps before installation of the NVR.
1. Keep all liquids away from the NVR.
2. Install the NVR in a well-ventilated and dust-free area.
3. Ensure environmental conditions meet factory specifications.
4. Use brackets for rack mounting.
5. Ensure there is ample room for audio and video cables.
6. When routing cables, ensure that the bend radius of the cables are no less than five times than its diameter.
7. Ensure the NVR is grounded.
8. Environmental temperature should be within the range of
0 º
9. Environmental humidity should be within the range of 10% to 90%.
.
NVR Installation
Purpose:
The product is a Network Video Recorder (NVR) as well as a LCD displayer. It can sit on the table or fixed in the wall. Follow the steps to install the product.
Sitting on the Horizontal Plane
Steps:
1.
Insert the bracket to the slot of the pedestal as the direction below. And make the four buckles tightly into the slot.
2.
Insert the combination of bracket and pedestal into the slot of the displayer. Until the circle hole in bracket is totally matched with the circle bulge of displayer.
6
All-in-One Network Video Recorder Quick Start Guide
3.
Lay the device on a horizontal plane.
4.
You can adjust the visual angle by holding the pedestal and move the displayer forwards and backwards.
As shown below, the adjustable angle is [-20, 5].
7
All-in-One Network Video Recorder Quick Start Guide
Fixing in the Vertical Plane
Before you start:
Prepare the needed tools: Drill, M5 expansion screw, M4 screw and screwdriver.
Steps:
1.
Separate the bracket into two parts by holding the both parts of the bracket and moving the part 1 downwards.
As shown below.
The Part 1 is wide at top and narrow at bottom.
8
All-in-One Network Video Recorder Quick Start Guide
2.
Put the part 1 in the wall and use a drill to bore four holes of 8 mm in the wall, according to the four screw holes in the part1.
3.
Insert four M5 expansion screws into the four screw holes in part 1.
4.
Fix the part 1 in the wall by using the screwdriver to tight the screws.
5.
Inserting four M4 screws into the screw holes of part 2.
9
All-in-One Network Video Recorder Quick Start Guide
6.
Connect the part 2 and the displayer by using a screwdriver to tight the screws.
7.
Hold the combination of part 2 and displayer and move the combination from top to down to combine it with part 1 again.
10
Front View
All-in-One Network Video Recorder Quick Start Guide
5
6
7
No.
1
2
3
4
Icon Description
Press it to switch input source.
In main menu interface, press it to select and enter a sub-menu.
In sub-menu interface, press it to exit the sub-menu.
In main menu interface, press it to positioning the cursor to the next item
In sub-menu interface, press it to increase the value of a certain item.
In main menu interface, press it to positioning the cursor to the upper item
In sub-menu interface, press it to decrease the value of a certain item.
Press it to enter main menu.
In main menu interface, press it exit main menu
In sub-menu interface, press it to positioning the cursor to the next item.
Turn on/off the LCD displayer.
Universal Serial Bus (USB) interface for external USB device.
LCD power indicator and IR (Infrared Radiation) receiver.
11
Rear View
All-in-One Network Video Recorder Quick Start Guide
7
8
9
10
2
3
1
No.
4
5
6
Name
AOUT-VGA
VGA OUT
LAN
AIN-VGA
VGA IN
HDMI IN
12V
Loudspeaker
Description
Audio output interface for NVR VGA signal.
Video output interface for NVR VGA signal.
Network interface.
Universal Serial Bus (USB) interface for external USB device.
Audio input interface for NVR VGA signal.
MIC interface for audio output.
Video input for VGA input.
Video input for HDMI input.
12V Power supply.
Loudspeaker for audio output.
12
All-in-One Network Video Recorder Quick Start Guide
HDD Storage Calculation Chart
The following chart shows an estimation of storage space used based on recording at one channel for an hour at a fixed bit rate.
Bit Rate
96K
128K
160K
192K
224K
256K
320K
384K
448K
512K
640K
768K
896K
1024K
1280K
1536K
1792K
2048K
4096K
337M
393M
450M
562M
675M
787M
900M
Storage Used
42M
56M
70M
84M
98M
112M
140M
168M
196M
225M
281M
1.8G
8192K 3.6G
16384K 7.2G
Please note that supplied values for storage space used is just for reference. The storage values in the chart are estimated by formulas and may have some deviation from actual value.
13
All-in-One Network Video Recorder Quick Start Guide
Menu Operation
Menu Structure
Menu
Advertising Playback
Files Import Normal
Advertising
Preview
Advanced
Configuration
Event
Tag
Smart
Subperiods
External
File
Export
Normal
Event
VCA
Search
People
Counting
Heat Map
Manual HDD Record Camera Configuration
Maintenance Shutdown
Record
Alarm
General
Schedule
Advanced
Parameters
Advanced
Holiday
Camera
OSD
Image
PTZ
General System Info
Network
Alarm
Live View
Log
Information
Import/
Export
Upgrade
Logout
Shutdown
Reboot
Motion
Privacy
Mask
Video
Tampering
Video Loss
Exceptions
Default
User
Net Detect
HDD
Detect
VCA
Startup and Shutdown
Proper startup and shutdown procedures are crucial to expanding the life of the NVR.
To start your NVR:
Step:
Plug the power supply into the electrical outlet. It is HIGHLY recommended that an Uninterruptible Power Supply
(UPS) be used in conjunction with the device.
After the device starting up, the wizard will guide you through the initial settings, including modifying password, date and time settings, network settings, HDD initializing, and recording.
To shut down the NVR:
Steps:
1.
Enter the Shutdown menu.
Menu > Shutdown
2.
Select the Shutdown button.
3.
Click the Yes button.
14
All-in-One Network Video Recorder Quick Start Guide
4.
Turn off the power switch on the rear panel when the attention pops up.
Setting the Admin Password
Purpose:
For the first-time access, you need to activate the device by setting an admin password. No operation is allowed before activation. You can also activate the device via Web Browser, SADP or Client Software.
Steps:
1.
Input the same password in the text field of Create New Password and Confirm New Password.
STRONG PASSWORD RECOMMENDED– We highly recommend you create a strong password of
your own choosing (using a minimum of 8 characters, including upper case letters, lower case letters, numbers, and special characters) in order to increase the security of your product. And we recommend you reset your password regularly, especially in the high security system, resetting the password monthly or weekly can better protect your product.
2.
Click OK to save the password and activate the device.
For the old version device, if you update it to the new version, the following dialog box will pop up once the device starts up. You can click YES and follow the wizard to set a strong password.
15
All-in-One Network Video Recorder Quick Start Guide
Login and Logout
User Login
Purpose:
If NVR has logged out, you must login the device before operating the menu and other functions.
Steps:
1.
Select the User Name in the dropdown list.
2.
Input Password.
3.
Click OK to log in.
The device gets locked for 60 seconds if the admin user performs 7 failed password attempts (5 attempts for the guest/operator).
User Logout
Purpose:
After logging out, the monitor turns to the live view mode and if you want to do some operation, you need to enter user name and password tog in again.
Steps:
1.
Enter the Shutdown menu.
Menu > Shutdown
2.
Click Logout.
After you have logged out the system, menu operation on the screen is invalid. It is required to input a user name and password to unlock the system.
16
All-in-One Network Video Recorder Quick Start Guide
Live View
Some icons are provided on screen in Live View mode to indicate different camera status. These icons include:
Live View Icons
In the live view mode, there are icons at the upper-right corner of the screen for each channel, showing the status of the record and alarm in the channel, so that you can find problems as soon as possible.
Alarm (video loss, tampering, motion detection or sensor alarm)
Record (manual record, continuous record, motion detection or alarm triggered record)
Alarm & Record
Event/Exception (event and exception information, appears at the lower-left corner of the screen.)
Adding IP Cameras
You should add and configure the online IP cameras to enable the live view and recording function.
Before you start:
Ensure the network connection is valid and correct, and the IP camera to add has already been activated. Please refer to the User Manual for activating the inactive IP camera.
You can select one of the following three options to add the IP camera.
IP camera in the same network segment with NVR will be added automatically.
Steps:
1.
Right-click the mouse when you in the live view mode to show the right-click menu.
2.
Select Add IP Camera in the pop-up menu to enter the IP Camera Management interface.
17
All-in-One Network Video Recorder Quick Start Guide
3.
The online cameras with same network segment will be displayed in the camera list. Click the button to add the camera.
The added camera is marked in white while the camera has not been added is marked in yellow.
Explanation of the icons
Icon Explanation Icon Explanation
Edit basic parameters of the camera Add the detected IP camera.
The camera is connected.
Delete the IP camera
Upgrade the connected IP camera.
The camera is disconnected; you can click the icon to get the exception information of camera.
Advanced settings of the camera.
Show the security status of the camera
Security
to be active/inactive or the password strength (strong/medium/weak/risk)
4.
To add other IP cameras:
1) Click the Custom Adding button to pop up the Add IP Camera (Custom) interface.
2) You can edit the IP address, Protocol, Management Port, User Name and Admin Password of the IP
18
All-in-One Network Video Recorder Quick Start Guide camera to be added.
3) Click Add to add the camera.
4) (For the encoders with multiple channels only) check the checkbox of Channel No. in the pop-up window, as shown in the following figure, and click OK to finish adding.
Recording
Purpose:
Two kinds of record types are introduced in the following section, including Instant Record and All-day Record.
And for other record types, you may refer to the user manual for detailed information.
After rebooting all the manual records enabled are canceled.
Instant Recording
On the live view window of each channel, there is a quick setting toolbar which shows on the bottom of the window when you click on it.
Click the icon to enable the record, and the icon turns to . And click icon to disable the record, then the icon turns to .
All-day Recording
Steps:
1. On the live view window, right lick the window and move the cursor to the Start Recording option, and select Continuous Record or Motion Detection Record on your demand.
2. And click the Yes button in the popup Attention message box to confirm the settings.
Then all the channels will start to record in the selected mode.
Playback
Play back the record files of a specific channel in the live view menu. Channel switch is supported.
Option 1:
Choose a channel under live view using the mouse and click the button in the shortcut operation menu.
Only record files recorded during the past five minutes on this channel will be played back.
19
All-in-One Network Video Recorder Quick Start Guide
Option 2:
Steps:
1.
In live view mode, right-click a channel.
2.
Click to select Playback from the menu.
Under multi-screen live view, record files of the selected channel will be played back.
Under multi-screen live view, record files of the selected channel will be played back.
3.
Playback management.
The toolbar in the bottom part of Playback interface can be used to control playing process.
4.
Check the checkboxes of channels if you want to execute simultaneous playback of multiple channels.
20
All-in-One Network Video Recorder Quick Start Guide
Backup
Recorded files can be backed up to external backup devices, such as USB flash drives and a DVD writer.
Before you start:
Connect the backup device to the USB interface.
Steps:
1.
Enter Video Export interface.
Menu > Export > Normal
2.
Choose the channel(s) to back up and click on the Quick Export button.
3.
Enter Export interface, choose backup device and click Export button to start exporting.
4.
Check backup result.
Choose the recording file in Export interface and click button to check it.
21
All-in-One Network Video Recorder Quick Start Guide
Advertising
The device provides you with a function of previewing advertising files. Insert a USB storage device into the device and start previewing advertising files, then the advertising files in USB storage device will be previewed.
Before you start:
1.
Convert the advertising files to supported format via Format Converter. For detailed steps, please refer to user manual of Format Converter.
2.
Store the advertising files in the root directory of USB storage device and insert the USB storage device into the device.
Steps:
1.
Enter Live View interface.
2.
Right-click to pop up right-click menu.
3.
Positioning the cursor to the One-touch Advertising.
4.
Click to select the advertising type as Video, Audio or Picture. Then the advertising will start preview.
5.
To exit the preview, you can right-click the preview image.
22
All-in-One Network Video Recorder Quick Start Guide
Accessing by Web Browser
Logging in
You can get access to the device via web browser. You may use one of the following listed web browsers: Internet
Explorer 6.0, Internet Explorer 7.0, Internet Explorer 8.0, Internet Explorer 9.0, Internet Explorer 10.0, Apple
Safari, Mozilla Firefox, and Google Chrome. The supported resolutions include 1024*768 and above.
Before you start:
Ensure the PC and NVR are in the same network segment.
Steps:
1.
Open web browser, input the IP address of the device and then press Enter.
2.
Login to the device.
If the device has not been activated, you need to activate the device first before login.
1) Set the password for the admin user account.
2) Click OK to login to the device.
STRONG PASSWORD RECOMMENDED– We highly recommend you create a strong password
of your own choosing (using a minimum of 8 characters, including upper case letters, lower case letters, numbers, and special characters) in order to increase the security of your product. And we recommend you reset your password regularly, especially in the high security system, resetting the password monthly or weekly can better protect your product.
If the device is already activated, enter the user name and password in the login interface, and click the
Login button.
3.
Install the plug-in before viewing the live video and managing the camera. Please follow the installation prompts to install the plug-in.
23
All-in-One Network Video Recorder Quick Start Guide
You may have to close the web browser to finish the installation of the plug-in.
Live View
The live view interface appears by default when you log in the device.
2
1
3
Interface Introduction
2
3
No.
1
4
Name Description
Displays the list of channels and the playing and recording status of each channel.
Channel List
The stream type can be switched by clicking the icon before the channel name: stands for main stream and for sub-stream.
Live View Window Displays the image of channel, and multi-window division is supported.
Play Control Bar Play control operations are supported.
Pan, tilt, zoom operations are supported, as well as preset editing and calling.
PTZ Control
PTZ function can only be realized if the connected camera supports PTZ control.
Start Live View
Steps:
1.
In the live view window, select a playing window by clicking the mouse.
2.
Double click a camera from the device list to start the live view.
3.
You can click the button on the toolbar to start the live view of all cameras on the device list.
Refer to the following table for the description of buttons on the live view window:
Toolbar Introduction
Icon Description Icon Description
Select the window-division mode
/
Open/Close audio
24
4
All-in-One Network Video Recorder Quick Start Guide
/
/
Start/Stop all live view
Capture pictures in the live view mode
Start/Stop all recording
/
Start/Stop two-way Audio
Adjust volume
/
Enable/Disable digital zoom
Previous/Next page Full screen
/
Select different stream type for live view by clicking the icon
: live view in main stream;
: live view in sub stream;
Recording
Purpose:
Two recording types can be configured: Manual and Scheduled. The following section introduces the configuration of scheduled recording.
Steps:
1.
Enter Record Schedule settings interface.
Remote Configuration > Camera Settings > Record Schedule
2.
Select the camera to configure the record schedule.
3.
Check the checkbox of Enable Record Schedule to enable recording schedule.
4.
Choose the day in a week to configure scheduled recording.
5.
Click Edit to edit record schedule.
1) Configure All Day or Customize Record:
25
All-in-One Network Video Recorder Quick Start Guide
If you want to configure the all-day recording, please check the All Day checkbox.
If you want to record in different time sections, check the Customize checkbox. Set the Start
Time and End Time.
Up to 8 segments can be configured and each segment cannot be overlapped.
2) Select a Record Type. The record type can be Continuous, Motion, Alarm, Motion & Alarm, Motion |
Alarm and VCA.
3) Check the checkbox of Select All and click Copy to copy settings of this day to the whole week. You can also check any of the checkboxes before the date and click Copy.
4) Click OK to save the settings and exit the Edit Schedule interface.
6.
Click Advanced to configure advanced record parameters.
7.
Click Save to activate the above settings.
Playback
Interface Introduction
2
3
No. Name
1
Channel List
4
Playback Window
Play Control Bar
Time Line
Description
Displays the list of channels and the playing status of each channel.
Displays the image of channel.
Play control operations are supported.
Displays the time bar and the records marked with different colors.
26
All-in-One Network Video Recorder Quick Start Guide
5
6
Playback Status
Calendar
Displays the playback status, including channel number and playback speed.
You can select the date to play.
Start Playback
Steps:
1.
Click Playback on the menu bar to enter playback interface.
2.
Click the camera from the device list for playback.
3.
Select the date from the calendar and click Search.
4.
Click the Play button to play the video file searched on the current date.
5.
Use the buttons on the toolbar to operate in playback mode.
Toolbar Introduction
Button Description Button Description
/
Play/Pause Stop
Speed down Speed up
Play by single frame
Stop all playback
Capture
Download
/
Start/Stop video clipping
/
Open/Close audio
Full screen Reverse playback
6.
You can drag the progress bar with the mouse to locate the exact playback point. You can also input the time in the textbox and click button to locate the playback point.
The color of the video on the progress bar stands for the different video types.
0300301050630
27
All-in-One Network Video Recorder Quick Start Guide
28
