educational kits - Electronix Express

educational kits - Electronix Express
EDUCATIONAL KITS
EDUCATIONAL KITS
LIE DETECTOR
POCKET DICE*
This circuit is a simple skin
resistance monitor. Have
the “subject” place a finger
on each of the contacts.
When the subject” becomes
nervous or uncomfortable,
skin resistance changes and
the frequency heard through
the speaker goes higher.
Teaches transistor oscillator.
*FREE SOFTWARE: Free Kit Prep™ software –
one disc per type of kit with purchase of above kit.
Part No. 32EKI2013 • Price: $8.25
WAKE-UP ALARM
This circuit turns on when light
hits the photocell. Teaches 555
programming and photocell.
Part No. 32EKI2039 • Price: $8.20
ULTRASONIC PEST REPELLER
This kit generates a signal that
oscillates between about 18KHz
and 80KHz every few seconds.
This is irritating to many bugs,
etc. and drives them away.
Teaches 555 programming and
transistor oscillator.
Part No. 32EKI2025 • Price: $8.20
DIGITAL ROULETTE
Will be a sure winner with you,
your friends and your relatives.
Thirty-two LEDs are arranged in a
five-inch circle.
Part No. 32EKI2058 • Price: $29.50
DOUBLE DECISION
MAKER
A handy device to be used with
any game of chance. This project
is fun and useful and everyone will
love to use it.
Part No. 32EKI2001 • Price: $16.20
REACTION TESTER
Test your timing by trying to hit the
button while the LED is lit. Since the
LED is lit only 1/10 second at a time,
you must anticipate the LED. Runs
on 9V battery (not included). Teaches
555 timer programming.
Part No. 32EKI2007 • Price: $7.95
AUTOMATIC
NIGHT LIGHT
This circuit automatically turns on
when it gets dark. Use the potentiometer to adjust how dark it needs
to get before it turns on. Teaches
photocell and transistor.
Part No. 32EKI2010 • Price: $8.25
HEADS OR TAILS
Turn the circuit on and the red and
green LEDs begin to flash. Push the
button and the circuit stops with one
LED held on. Green = heads, red =
tails. Teaches 555 programming.
Part No. 32EKI2008 • Price: $7.25
POT SHOT
8 LEDs light sequentially. Hit
the button on the top LED
and the light stays on, you
win. Hit the button another
time and all the lights go off.
Adjustable frequency.
Part No. 32EKI2017 • Price: $8.25
The deluxe heads or tails game.
Green = heads, red - tails, both
or neither = maybe. Teaches 555
programming and counters.
DIGITAL DICE
Part No. 32EKI2011 • Price: $8.25
Part No. 32EKI2068 • Price: $12.95
This single dice is fun to build, and
fun to display and play
Call Toll Free: 1 (800) 972-2225 • In NJ: (732) 381-8020 • Fax:
(732) 381-1006
(732) 381-1572
341
EDUCATIONAL KITS
EDUCATIONAL KITS
HIDDEN TORMENTOR*
LED BLINKER
The perfect project to drive your family and
friends crazy. Hide it well and they can spend
hours finding the source of its intermittent and
thoroughly annoying noise.
Two super-diffused LEDs pulse
out light for hours on end. Easy
to assemble and fun to use.
*FREE SOFTWARE: Free Kit Prep™ software – one
disc per type of kit with purchase of above kit.
BURGLAR ALARM*
Part No. 32EKI2099 • Price: $5.40
Part No. 32EKI2088 • Price: $9.25
An easy-to-build alarm for your
car, house, room or closet. Keep
the snoop out of your stuff!
SPACE WAR GUN
*FREE SOFTWARE: Free Kit Prep™
software – one disc per type of kit
with purchase of above kit.
Creates those realistic sound effects you
hear in space science fiction movies.
Part No. 32EKI2003 • Price: $11.95
FISH CALLER
This kit is scientifically designed to
sound like food and attract hungry fish
in the vicinity.
Part No. 32EKI2018 • Price: $11.20
DIGITAL BIRD
A fantastic dinosaur/bird sound generator
that sounds like nothing you have heard
before
Part No. 32EKI2078 • Price: $12.00
WHOOPER ALARM*
Makes an excellent alarm device for the Combination Lock/Alarm Control. it can also be used
independently as a sounder or siren
*FREE SOFTWARE: Free Kit Prep™ software – one
disc per type of kit with purchase of above kit.
Part No. 32EKI2050 • Price: $9.20
Part No. 32EKI2006 • Price: $9.25
FM MICROPHONE TRANSMITTER*
Confound and amaze your friends with this
actual radio transmitter! It transmits up to 40
feet. With the crystal microphone included,
you broadcast to any nearby FM radio.
WARNING: Not to be used for
jamming radio to TV reception
*FREE SOFTWARE: Free Kit Prep™ software – one disc per
type of kit with purchase of above kit.
Part No. 32EKI2045 • Price: $11.20
METAL DETECTOR*
A cousin to early army mine detectors
and today’s super sensitive solid state
metal locator. So go ahead, find buried
treasure! It works with any portable
AM radio.
*FREE SOFTWARE: Free Kit Prep™ software
– one disc per type of kit with purchase of above kit.
Part No. 32EKI2004 • Price: $7.25
SIREN CODE OSCILLATOR
Is really two projects in one. This
functions as an excellent code
practice oscillator as well as a siren.
Use at home or on your bicycle, etc.
Part No. 32EKI2012 • Price: $9.25
AUTOMATIC SIREN
AUDIO AMPLIFIER / INTERCOM
Definitely sounds like the real thing.
Can be used with a burglar alarm or
as an attention getter.
This kit can be used as a PA amplifier,
phono amp., a “bug” or an intercom. Use
it at home, in your RV, boat, or anywhere
else you need a compact amplifier system.
Part No. 32EKI2024 • Price: $11.20
Part No. 32EKI2086 • Price: $14.95
342
ELECTRONIX EXPRESS / RSR • 900 Hart Street, Rahway, NJ 07065
EDUCATIONAL KITS
FUZZ BOX
A two-transistor amplifier that adds distortion to
the output signal of an electric guitar.
Part No. 32EKI2026 • Price: $12.20
SOLAR FAN KIT
This circuit converts sunlight into electrical
energy. The fan speed is controlled by the
intensity of the sun collect by the solar panel.
This kit provides a rudimentary demonstration
for how solar energy works.
Part No. 32GSK1001 • Price: $19.25
SOLAR GUIDE
LIGHT KIT
This circuit illuminates 5 LED’s when there is
not sufficient sunlight for the solar panel to
charge batteries. The LED’s will automatically
turn on and draw voltage from the batteries
when the solar panel can no longer convert
sunlight to DC voltage.
Part No. 32GSK1004 • Price: $21.25
SOLAR BLINKING
LIGHT KIT
This is a blinking light circuit power by
the energy of the sun. Utilizing a solar
panel to convert the suns energy two
LED’s will alternatively blink and the
blinking speed may be adjusted.
Part No. 32GSK1005 • Price: $17.00
MOSQUITO
REPELLENT KIT
This circuit generates a frequency 10-30 kHz
that creates a sonic zone disturbing to mosquitoes. A piezo board creates the frequency
equal to the frequency generated by the
mosquito during flight causing the mosquito
to believe he/she is flying into a trap.
BATTERY
CHARGER KIT
This kit contains parts to assemble a
Lithium-ion Polymer battery charger.
These batteries are becoming popular
with radio controlled devices, iPods®,
MP3, and laptop computers.
Part No. 32GSK819 • Price: $19.50
VOLTAGE
BOOSTER KIT
This DC voltage booster circuit enables a
12 V DC source to be converted (stepped
up) to a higher DC output voltage
Part No. 32GSK820 • Price: $30.75
VOICE CONTROL
SWITCH KIT
Classified as a remote controlled circuit this
product uses an audio signal (clap on) to
activate the on/off function of the switch.
A sensitivity/volume controlled microphone
picks up audio signal activating a relay generating an electrical signal to the switch.
Part No. 32GSK409 • Price: $8.75
DC MOTOR
SPEED CONTROL KIT
This circuit allows the user to vary the
speed of a DC motor from a stop position to maximum revolutions per motor
specification.
Part No. 32GSK804 • Price: $10.95
MOISTURE
RESISTANCE INDICATOR KIT
Puts all incoming and outgoing calls
on hold at touch of a finger.
This checker utilizes resistance to measure dissolved solids in water. The more
resistance, the less conductive the water;
as resistance levels lessens the materials that conduct electricity are elevated.
Results are displayed by a series of (8)
LED’s.
Part No. 32EKI2092 • Price: $6.95
Part No. 32GSK944 • Price: $10.50
Part No. 32GSK918 • Price: $4.25
HOLD BUTTON
Call Toll Free: 1 (800) 972-2225 • In NJ: (732) 381-8020 • Fax:
(732) 381-1006
(732) 381-1572
343
EDUCATIONAL KITS
3D LED CUBE 3X3X3
CHRISTMAS TREE
• Produces flashing colored
LED’s
• Three popular Christmas
melodies
• Requires one 9V battery
(Not Included).
Part No. 32ELENK14 • Price $11.95
METAL DETECTOR
To come up against an electric cable while drilling a
hole in a wall can have catastrophic consequences.
Likewise, drilling into gas, water pipes or central
aheating pipes can be extremely hazardous. With
a handy metal detector, it can now be determined
beforehand whether there are metal objects to be
Intermediate Level
found in a wall, ceiling or floor. An LED indicates if
a metal object is in the vicinity of an audio signal is also desired, space
has been provided on the PCB for buzzer type SV4/12 to be connected.
The PCB has been specially constructed to fit entirely into the separately
available box type G407. Battery supply: 9V battery (not included).
MODEL MK193
• LEDs: 3 x 3 x 3 = 27 LEDs (30
LEDs supplied)
• large amount of user
programmable frames
• user programmable via USB
(creation of animation/scenes)
• colour:
• standard: red version
• Soldering skills required
• Software:
-- Create all the animations you
want and share them with
others!
-- Divide your animation into
multiple scenes
-- Up to 234 animation frames
-- Supports basic geometric operations (shift, rotate...)
Part No. 32VMK193 • Price: $29.95
Part No. 32VK7102 • Price: $15.95
POLICE SIREN
This circuit produces a siren
effect similar to the European
style police sirens. Use it alone or
together with any alarm control circuit
for a very unique effect.
Principles Taught: 555 oscillator, tone generator
Part No. 32EKI2106 • Price: $7.35
MOISTURE DETECTOR
This kit can be used to monitor the
moisture around your plants. The
LED flashes according to the
amount of moisture it measures.
The kit can also be used as a test
instrument to check for electrical connections in the repair of
appliances
Principles Taught: 555 control
Part No. 32EKI2109 • Price: $8.20
WATER ALARM
BEGINNER LEVEL
Incorporated alarm buzzer sounds when
water detected. Water sensor can be placed
at a distance. 9V battery not included.
Part No. 32VK108 • Price: $4.95
344
SuperEar™
PERSONAL SOUND ENHANCER
SUPEREAR – 50dB
SUPER EAR PLUS – 107dB
Binoculars for your ears. Powerful sound
amplification indoors and outdoors. Nature
lovers, senior citizens and sports fans enjoy
a whopping 50dB sound gain. Multi-element
microphone mounted on swiveling sound boom
with protective foam windscreen cover. Also includes premium stereo headphones that deliver
crisp, clean sound in the full audio range.
•
•
•
•
•
Pick up bird calls from 100 yards away
Enjoy sounds of nature as never before
Use for meetings, lectures, watching TV, ceremonies
Mount directly onto binoculars, attach to pocket, belt or gear
Complete with pocket clip, binocular mountings and a 1.5V
AAA Battery
SuperEar Plus Model
Ideal for the slight to moderate hearing impaired person.
Complies with the Americans with Disabilities (ADA) act
for requirements for Assistive Listening Device. Perfect for
watching TV, attending meetings or simple conversations.
Features a volume control located on the headphone leads
for easy adjustment, and auto-off after 30 minutes.
Note: Use of sound amplification device for easvesdropping
purposes is not only impolite, but also illegal.
Part No.
26SUPEREAR
26SUPEARPLUS
Description
50dB Unit
107dB Unit
Price
$31.50
58.95
ELECTRONIX EXPRESS / RSR • 900 Hart Street, Rahway, NJ 07065
EDUCATIONAL KITS
FLASHING LED STAR
SHAKING DICE
Features
• No push buttons required, just
give It a shake
• Rolls out slowly and flashes last
combination
• Microprocessor-controlled
• Auto power-off
Specifications
• Power supply: 3V-battery ( battery not included)
Part No. 32VKMK150 • Price: $10.95
STEREO VU-METER
Stereo VU meter with 2 x 10
LEDs (dot or bar indicator) and
an adjustable input. Included in
package : 1 front panel suitable
for horizontal or vertical mounting.
Specifications
• Range: -20dB to +3dB
• Power supply: 10 - 15V DC / 250mA
• Input sensitivity:
• Low input: 150mV to 6Vrms (47K)
• High input: 1.5V to 60Vrms (470K)
• Dimensions: 1.5 x 2.7" (x2)
Part No. 32VKK4305 • Price: $29.95
POCKET VU-METER
Surprise your friends in the disco.
• 5 red LEDs.
• Built-In microphone.
• Adjustable sensitivity.
• power supply: 3V type CR2032
battery (not incl.)
Part No. 32VKMK115 • Price: $7.50
8­-CHANNEL USB RELAY CARD
· USB controlled relay card
· 9V battery snap includedManual operation
(selectable through software)
· Timer settings up to 18 hours (DLL function)
· DLL for own software development
(download only)
• Two way PC communication (USB Event return)
• Power supply for relays: 9-10VAC or 12 to 14VDC (500mA), example:
PS1205
• 8 high-power relays: 16A each (resistive load)
• Dimensions: 160 x 017 x 30mm / 6.3 x 4.2 x 1.2"
Part No. 32VKK8090 • Price: $64.95
Features
• Great seasonal gadget !
• Safe battery operation
• Select: flashing or static operation
• Application: desktop or hanging from the ceiling
• Multiple kits enhance the effect
• In-car (12V) operation possible
Specifications:
• 35 LEDs
• Power supply: 1x 9V battery (not incl.)
• Current consumption: 40mA (static mode)
• Flash duty cycle: 1:2
• Dimensions: 3.54 x 3.54"
Part No.
32VKMK169R
32VKMK169Y
Description
Flashing LED Star, Red
Flashing LED Star, Yellow
Price
$12.95
12.95
LOVE TESTER
Features:
• Check your love life !
• Each partners holds one end of the PCB, then they join hands, watch the meter go
• Great fun at parties, among friends, etc...
• 10-LED readout plus audible 'love-level'-indication
• Flashing LEDs indicate you're a red-hot lover
• Wide sensitivity range covers the entire spectrum, from the cool to a steaming Latin lover!
• Power switch included
Specifications:
• Power supply: 9V battery (not included)
• Dimensions: 4.1 x 3.1 x 0.98"
Part No. 32VKMK149 • Price: $14.95
60-LED MULTI EFFECT STAR
Features
• Processor-controlled LED star creating
multiple dazzling effects
• Extra LEDs included, allowing different
colour combinations:
-- make your own mix of red and yellow
LED's or make the star fully red or yellow
• On-board effect selection push button
• 24 effects: 3 static, 15 blinking, 6 animations
with fading "All effects" sequencing is
possible (standard setting)
Specifications:
• 60 LEDs on board
• Power supply: 9 to 12Vdc adapter or battery (not incl.)
• Current consumption: 20mA (static mode 9V battery)
• Dimensions: 4.13 x 4.33 x 1.38"
Part No. 32VKMK170 • Price: $29.95
Call Toll Free: 1 (800) 972-2225 • In NJ: (732) 381-8020 • Fax:
(732) 381-1006
(732) 381-1572
345
EDUCATIONAL KITS
SMD FLASHING HEART
Features
• Miniature size gadget
• 6 LEDs flash alternately
• Can be operated pending (e.g. around the neck) or can be worn
as a badge (pin supplied)
• Great attention grabber
• Ideal introduction to SMD (Surface Mounted Device) technology
• Some extra parts are supplied, in case some get lost or damaged
Specifications
• Power supply: 3V Li button cell (Cell not included)
• Power consumption: 5mA approx.
• Dimensions: 1.9 x 1.7 x 0.3"
Part No. 32VKMK144 • Price: $9.50
USB INTERFACE CARD
The VM110N interface board
has 5 digital input channels and 8
digital output channels.
• In addition, there are two analog
inputs and two analog outputs with
8 bit resolution
• The number of inputs/outputs can be
further expanded by connecting more
(up to a maximum of four) cards to
the PC's USB connectors.
Part No. 32VKVM110N • Price: $74.90
OSCILLOSCOPE
TRAINING KIT
Learn how to get the most out of your
digital oscilloscope. The board generates a
number of safe 'real-world' signals, which
we will use to perform measurements.
Get familiarized with AC, DC and
frequency measurements, sine
and square waves, power supply
ripple, full and half wave rectifiers,
oscillators etc…
Learn what terms such as V/div,
Time/div, trigger level, auto-setup etc… mean. All experiments
featured in this project are performed with the Velleman
HPS140 Handheld Pocket Scope. Most experiments can be
done with any digital storage scope. Some experiments can be
performed with an analog scope.
Features:
• Signals:
• Alternating current (AC)
• Adjustable AC
• Full-and half wave rectified AC
• Smoothed direct current (DC)
• Ripple
• Astable oscillator
• Assembled and tested, no soldering required
Specifications:
• Power supply: 9...12VAC / min.100mA (adapter not incl.)
• Dimensions: 116x74x24mm / 4.6x2.9x0.9"
• Optional: 9VAC /500mA adapter PS905AC
Part No.32VKEDU06 • Price: $29.50
346
USB TUTOR MOUNTED
Part of our EDUKIT range
Starting from an already made example program, this module will teach you how to:
• Read up to 8 push buttons and activate
a PC event
• Light up to 8 LEDs using your PC
• Read the value of 2 different
potentiometers (analog value)
• Read and display the temperature
on the PC
• Read the value of a temperature dependent
resistor (NTC)
• Read the value of a light dependant resistor (LDR)
• Dim a white LED using your PC
• Learn how to display text on an LCD using your PC
• Learn how to combine the above and use the LCD to display push button press, display values..
Specifications
• USB powered + LED indicator
• PC with windows XP or higher (internet needed for software
download)
• Digital input/output:
• 8 definable push buttons
• 8 definable LEDs
• 1 White LED
• Analog input:
• Temperature sensor
• NTC resistor
• LDR resistor
• 2 potentiometers
• Display:
16 character 1 line LCD
Includes:
• USB cable
• Board dimensions: 75 x 75mm / 3x3"
Part No. 32VKEDU05 • Price: $69.95
SOLDERLESS
EDUCATIONAL STARTER KIT
The EDU01 basic experiment kit is
the first step into the world of modern
electronics. Build your own circuits in
a fun, safe and educative way. The kit
contains a breadboard and all necessary components to get started right
away. You will finish assembling your
first circuit in just a few minutes…
Features:
• Part of our EDUKIT range
• 10 exciting projects to build
• No soldering required
• High-quality breadboard with 456 contact terminals
• Extended manual
• Projects include: blinking LEDs,
burglar alarm, light sensor, polarity tester, start-stop circuit, timer, running light, water alarm and more...
Specifications:
• Breadboard dimensions: 80 x 60mm / 3.15" x 2.36"
Part No. 32VKEDU01 • Price: $19.95
ELECTRONIX EXPRESS / RSR • 900 Hart Street, Rahway, NJ 07065
EDUCATIONAL KITS
SOLDER: TIME WATCH KIT
LED DICE KIT
There is only one die
per kit (you do have
your choice of red or
green LEDs). Designed
for beginners, the kit
comes with everything you need to make one ‘Electronic Die’.
Tap the completed kit on the table and the LEDs light up and show a
number from 1 through 6. After a short while, the LED dice goes into
sleep mode, until the next time it is tapped.
Part No.
32MKDGRN
32MKDRED
Description
Green color
Red color
Price
$18.99
18.99
AUDIO ANALYZER
Small and compact unit, ideal for
panel mounting.
Give your homemade audio gear
a high-tech look. Upgrade existing
equipment.
Features
• Measure:
Peak power
RMS power
Mean dB
peak dB
Linear audio spectrum
1/3 octave audio spectrum
• Auto or manual range selection
• Peak-hold function
• Speaker impedance selection
• Language selection
• White backlit LCD
• Easy panel mounting
Specifications
power measurement into 2, 4 or 8 ohms + bridged amp option
range: 300mW to 1200W @ 2 ohms
sensitivity: -34dBu (15.5 mVrms)
max. input level: 50Vrms @ 220k
frequency range: 20Hz to 20kHz
power supply: 12VDC / 75mA
dimensions:
display: 128 x 64 pixels (46 x 23mm / 1.8 x 0.90")
front panel: 98 x 51mm / 3.8 x 2"
mounting depth: 35mm / 1.37"
Part No. 32VKK8098 • Price: $59.95
3 W MONO AMPLIFIER
Small but powerful amplifier suits a wide range of applications such
as: portable PA, for doorbells, melody generators, intercom, sound
effects, earphones, radio receivers, PC sound card, guitar amp, ...
Features
• Compact size
• Low partcount
• No additional heatsink required
• Single supply
• Wide supply range
• Excellent protection
Specifications
• Output power: 3Wrms (4-8 ohm, 15VDC, 10% THD)
• Frequency range: 50Hz - 20kHz (1W/8ohm, -3dB)
• Gain: 32dB (40x)
• Thermal and Short circuit protection
• ZCurrent consumption: 500mA max.
• Dimensions: 1.6 x 1.9"
Power supply: 6 ~ 15VDC SOLD SEPERATELY
Part No. 32VKK8066 • Price: $12.00
Solder:Time is an easy to solder real time
watch kit with a unique laser cut acrylic casing. Four individual acrylic parts are cut to fit
the internal PCB, battery and switch perfectly.
Includes a velcro wrist band. After soldering
the Solder:Time, the watch is built by stacking
the acrylic parts with the PCB and holding it
together with the included screws. Solder:Time is a true conversation starter that looks
great and is completely functional.
Features:
• Great looking laser cut acrylic case
• Unique watch
• Easy to solder
• Stand alone project - no computer or other programmer required.
Just solder it and it's ready!
• On board Dallas DS1337+ Real Time Clock (RTC) for super
accurate time keeping
• Jumper (on bottom) for always on use.
• Hackable: Programming and I2C pads labeled on bottom
• Clear front and back casing to show the internal electronics
• Adjustable wrist band
• Can also be worn as a badge with optional badge clip.
• Long lasting battery, with special LED lighting method and very low power processor sleeping.
Part No. 32MKSTK1 • Price $32.95
SOLDER: TIME II WATCH KIT
The Solder: Time II is an upgraded version of
our Solder: Time Watch Kit. This new version
is more hackable than ever. The Solder: Time
II uses the same ATmega328P microcontroller
used in the Arduino UNO, allowing you to program it using the Arduino software.
The Solder: Time II has a very impressive
display. Four 5x7 LED matrix modules gives you
control of a 7x20 matrix for a total of 140 LEDs!
The new LED matrix allows for an amazing
amount of information to be displayed; time,
date, month, words, scrolling messages, graphics, special characters ... the possibilities are endless. The STII also
has a piezo buzzer for the alarm. You can also use it to add sounds
to you custom programming or even write games that you can play
on your wrist!
The watch comes preprogrammed and requires soldering and assembly which should take less than one hour.
Part No. 32MKSTK2 • Price $59.00
DIGITAL ECHO CHAMBER
Great effect tool - tool - tool!!! Can
be used for various audio systems,
karaoke, PA; toys, or just for fun
• 4 Adjustable for MIC or input
•
•
•
•
•
•
level or output level, echo delay
time, volume or SRAM for low
distortion and good sound
quality. Onboard microphone and
audio amplifier, line-in & line-out connection
9V battery snap included
Power supply: 9V battery (battery not included)
or 9...12V DC regulated
Power consumption: 150mA max.
Delay time: 80...200ms
Speaker output: 500mW (8 ohm, 10% THD)
Dimensions: 85 x 70 x 20 mm / 3.5 x 2.76 x 0.78"
Part No. 32VKMK182 • Price: $18.95
Call Toll Free: 1 (800) 972-2225 • In NJ: (732) 381-8020 • Fax:
(732) 381-1006
(732) 381-1572
347
EDUCATIONAL KITS
MINI-6-LED CHASER
SIGNAL GENERATOR KIT
•
•
•
•
•
Signal output: sine wave, triangle,
square wave and integrator (selectable
through jumper)
Signal frequency: about 1kHz (fixed)
Output level: adjustable from 0 to
100mVrms (LEVEL potentiometer)
Power supply: 9V battery (not incl.)
Dimensions: 2.2" x 1.6"
Part # 32VKMK105 • Price: $4.90
SINGLE-MESSAGE
RECORD/PLAYBACK
PROJECT
• Record time between 10 and
•
•
•
•
•
•
•
35 sec. (adjust the sample
rate)
Onboard microphone
Speaker Ø 57mm included
l Line-out to drive external
amplifier, e.g. for
— K8066: 3W mono amplifier
— K4001: 7W mono audio amplifier
eExternal trigger input to play message
3 x AA battery holder included
Using the speed adjust a " funny voice" can be created
Power supply: 4.5V battery (3 x AA not incl.), ex.LR6BL
Part No. 32VKMK174 • Price: $29.90
100W SUBWOOFER KIT
Kit contains all necessary parts to build your compact but powerful high quality subwoofer. (Wooden panels not included!)
• Bass-reflex system with adjustable tube
• Compact size due to dual-speaker principle
• Adjustable level and filter
response
• Auto power-on/off system
• Phase switch (0°-180°)
• Line level and speaker level
inputs for maximum compatibility
• 'Full-range'-option for use in
active speaker system
• Separate chamber for electronics avoids air leaks
SPECIFICATIONS
• Power output: 100Wrms/ 4ohm (10% THD)
• Filter freq. response:
• Wide: 25 - 110Hz (-6dB)
• Narrow: 18 - 65Hz (-6dB)
• Speakers: two 6.5" 8 ohm drivers
• Line level input sensitivity: 500mV
• Auto turn-on level: 5mV
• Volume*: approx. 20 liter
• Power supply: 120/230VAC
• Dimensions: 460x310x210mm / 18,22 x 12,28 x 8,32"
Part No. 32VK8077 • Price: $139.95
348
• 1 LED scans from side to side
• As attention grabber in stores, at
exibitions, etc...
• As seen in classic TV series...
•Applications:
—Toys
—Scale and RC models
—As gadget
—For stage, plays, movies, etc...
• 6 high-intensity 3mm red leds
SPECIFICATIONS
• Power supply (required): 4-15VDC (20mA at 12VDC)
• Fixed scan speed (side to side): 0.5s
• Dimensions: 55 x 25 x 10mm / 2.18 x 0.99 x 0.39"
Part No. 32VKMK173 • Price: $12.95
EXTENDED USB
INTERFACE BOARD KIT
This interface board kit (requires
assembly) has a total of 33 input/outputs: including analogue / digital and +
1PWM output.
Connection to the computer is galvanically-optically isolated, so that damage
to the computer is not possible thus
providing a high level of secure implementation.
All communication routines are contained in a Dynamic Link Library
(DLL).
You may write custom Windows* applications in Delphi, Visual Basic,
C++ Builder or most other 32-bit Windows application development tool
that supports calls to a DLL.
For first time interfacing and tutoring, check K8055 USB experimentation interface board
* WinXp recommended for optimum compatibility
* Are registered trademarks of MICROSOFT CORP.
• 8 analogue 10 bit resolution inputs: 0…5 or 10VDC / 20kohm
• 8 analogue 8 bit resolution outputs: 0…5V or 10VDC / 47ohm
• 8 digital inputs: open collector compatible (connection to GND=0) with
on board LED indication
• 8 digital open collector outputs (max. 50V/100mA) with on board LED
indication
• One 10 bit PWM output: 0 to 100% open collector output (max 100mA
/ 40V) with on board LED indication.
• General response time: 4ms per command
• USB Port: 2.0 and 1.1 compatible (USB cable included)
SPECIFICATIONS
• Power consumption through USB port: approx. 60mA
• Up to 8 cards can be connected to PC
• Power supply through adaptor: 12Vdc / 300 mA (PS1205)
• PWM Frequency: 15,6 KHz
• Standard execution time: 48mS
(use Microchip and K8061D.DLL drivers)
• Enhanced execution time: 21mS
(use K8061_C.DLL V1.0 by RE Applications)
• PCB Dimensions: 195 x 142 x 20mm (2.7 " x 5.6" x 0.8")
• Minimum system:
• Pentium class CPU with free USB port (1.1 or higher)
• Windows 98SE or higher (Win NT excluded) *
• CD ROM player and Mouse
Part No. 32VK8061 • Price: $139.00
ELECTRONIX EXPRESS / RSR • 900 Hart Street, Rahway, NJ 07065
EDUCATIONAL KITS
RUNNING MICROBUG
ELECTRONIC CRICKET
Soldering project. Light-attracted,
bug-shaped robot kit. Advances
toward light source. Adjustable.
Stops in total darkness.
Can be used for fun or to
simulate a hot summer night.
Automatically comes on when it
gets dark. Cricket repetition (time
between two crickets), effect and
tone adjustable. Adjustable light
sensitivity.
Part No. 32VMK127 • Price: $10.50
CRAWLING MICROBUG
Soldering project. Bright colored, bug-shaped
robot kit. Advances toward light. Two open
chassis sub-mini motors. Adjustable light-sensitivity and speed. Choose between two
different walks. Stops in total darkness.
Part No. 32VMK129 • Price $11.95
MULTIFUNCTIONAL
INVISIBLE INK PEN
MODEL VDLIIP
• The words you write are invisible in
normal day-light, but they appear
under the light of the pen
• Can be used to detect counterfeit money
• Suitable for a variety of fun applications: secret messages,
security markings, party gadget, ...
Part No. 32VDLIIP • Price: $4.50
Consumption: ± 5mA
Power Supply: 9V Battery (Not Incl.)
Dimensions: 2.4 x 0.4 x 1"
Part No. 32VMK104 • Price: $5.95
WHEEL OF FORTUNE
10 LED’s (red, yellow and green).
Push the button to start spinning
action. Spinning action gradually
decreases. Finally, it stops and
one LED remains lit. Auto power-off. Requires 9V battery.
Part No. 32VMK152 • Price $6.75
STROBOSCOPE
Adjustable flash frequency 2 ~ 20Hz.
Input 110VAC. Make your own snapshots and “lightning” effects.
Part No. 32VK5300 • Price: $21.95
MICROPROCESSOR
CONTROLLER / TIMER
FLEX SENSOR
MODEL K6000
Requires soldering. In
addition to conventional
week/day timer features,
this controller may be
used to regulate temperature independently with one or all four outputs. Up to 4 sensors.
Temperature may be measured far from the actual controller.
Controller displays a message when a sensor is out of order
and will switch off the corresponding output. Equipped with LCD
display, data such as output number, temperature or on/off, day
and time are displayed. 4 noise-free relay outputs: max, 5A. 4
optocoupler inputs for temperature sensors. 50 program steps
per output (total 200). Week or day programming. 110V operation. Memory back-up capability. Transformer included.
Part No. 32VK6000 • Price: $145.00
0'
Unique component with
applications including:
Robotics, Physics Experiments, Virtual Reality
Gloves, and Bio-Metrics.
•
•
•
•
•
Approximate force
needed to deflect
end 90 degrees:
5 grams
90'
Changes resistance in proportion to degree it is bent.
Nominal resistance 10K.
Maximum resistance 40K.
At 90 degrees approximately 35K
Dimensions: 4 1/2" x 0.02"
Part No.
32FLXSENS
1-9
$17.95
10+
$15.95
Call Toll Free: 1 (800) 972-2225 • In NJ: (732) 381-8020 • Fax:
(732) 381-1006
(732) 381-1572
349
EDUCATIONAL KITS
ELECTRONIC KITS
LIGHT BARRIER IR
Applications : announce visitors, warn against burglars, set boundaries, for science projects,...
• Audible (85dB) and visible
• 9V battery holder and
(LED) alert
adapter jack included
• Range: 3.3 ft to 13 ft
• dimensions:
• On/off switch provided
– Transmitter: 2.2" x 1.6"
• Power supply:
– Receiver: 3.9" x 2.0"
– Transmitter: 9V DC/50mA max. • Not recommended for
– Receiver: 9V DC / 20mA max.
outdoor use
Part No. 32VKMK120 • Price: $8.95
FM RADIO
•
•
•
•
•
•
•
Double fun: building and listening !
Easy to assemble: no coils to wind
One single adjustment
Pre-assembled and tested FM front end
Receives the complete FM band: 88-108 MHz
With ON/OFF switch, volume control and LED indicator
Dimensions: 4.8” x 3.3”
BRAIN GAME
Just 4 LEDs and 4 push buttons provide hours of fun. The
aim-of-the-game is to repeat a pattern, which is generated
at random. The pattern is played both visually and audible or
visually only (selectable). It features 4 difficulty levels, which
can be selected at start-up. The replay speed gradually increases
during the game, to make it even more challenging. Low power consumption.
Microprocessor controlled. Auto power off. Dimensions: 2.0” x 2.6”
Part No. 32VKMK112 • Price: $10.25
PC FUNCTION GENERATOR
•
•
•
•
•
•
•
•
Part No. 32VKMK118 • Price: $21.50
•
FLASHING LED’S
•
BEGINNER LEVEL
Applications include model construction. Adjust flashing speed with
trimpots. 9V battery not included.
Part No. 32VK102 • Price: $3.50
IR REMOTE CONTROLLED DIMMER
This one channel IR receiver/dimmer works together with the 15
channel IR transmitter (K6710 and K8049). The receiver code
can be set to 1 of the 15 transmitter codes so that 15
receivers can be operated (K6712 and/or K6713)
independently of each other. Thanks to its compact
design this kit fits into a standard light switch housing.
Part No. 32VKK6712 • Price: $46.50
PIC PROGRAMMER &
EXPERIMENT BOARD
• Suitable for programming Microchip®
FLASH PIC™ microcontrollers
• Supports 4 different 300 mil. PICs: 8p,
14p, 18p and 28p
• Test buttons and LED indicators to carry
out educational experiments, such as enclosed programming examples.
• Easy connection to PC through the serial port
• Enclosed is a Flash Microcontroller (PIC16F627) that can be reprogrammed up to 1000 times for experimenting at will
• Software to compile and program you source code is included
• Minimum system requirements: IBM Compatible PC, Pentium or better;
Windows 95/98/ME/NT/2000/XP, CDROM, Free serial RS232 port,
cable not included (e.g. CW014)
• Dimensions: 5.75" x 4"
Part No. 32VKK8048 • Price: $34.95
350
•
•
•
Frequency range: From 0.01Hz to 1 MHz
Crystal-based stability
Optically isolated from the PC
Low sine wave distortion
TTL level synchronization output
Stores up to 32K of waveform points
Standard waveforms: Sine, square and triangle
Predefined library waveforms included: Noise,
sweep
Includes Windows 95/98/NT/2000/X) integrated software for the
function generator and Velleman PC oscilloscopes
You can create your own waveforms with the integrated signal wave
editors
Can be chained with Velleman PC oscilloscopes to the same
PC printer port (LPT1, 2 or 3)
Function generator screen with signal preview
Minimum system requirements: IBM compatible PC/ Windows
95, 98, ME, (Win2000, XP or NT possible), SVGA display card
(mi. 800x600), mouse, free printer port, CD Rom player
Part No. 32VKK8016 • Price: $130.00
4 CHANNEL RECORDER/LOGGER
• Record DC signals or slow moving signals over very long period
• The measurements are automatically stored on your hard disk for further
processing
• Through the use of USB connection, there is no need
for power supply and installation is easy and straight
forward
• Signals are instantly displayed on the PC screen
using analog or DVM display
• USB cable included
• PC-LAB2000 Software included
• Comes with enclosure
SPECIFICATIONS:
Hardware:
— USB connected and powered
— Four DC coupled input
channels
— Maximum samples per
second - 100
— Four input ranges 3V/6V/15V and 30V
— Sensitivity - 10mV
— Accuracy - ±3% of full scale
— Maximum Input - 30V DC
— Power and recording/diagnostic LED
Software:
— Analog trace or digital DVM readout
— 4 simultaneous channels recording
— Minimum/maximum sample hold
function for DVM
— From 1 sec to 1000 sec per division
— Storage and recall of screens (full
color) or data
— Automatic recording option for long
time recordings
— On screen markers for time and
voltage
— DLL included for own development
System Requirements: PC running Win98SE or higher (does
not work on WinNT or Win95); free USB port; mouse; CD-rom
player
Part No. 32VKK8047 • Price: $42.95
ELECTRONIX EXPRESS / RSR • 900 Hart Street, Rahway, NJ 07065
EDUCATIONAL KITS
ELECTRONIC KITS
MOVING MESSAGE DISPLAY
RED LEDS
Advanced Level
Create your own message for personal advertisements. 12 self definable
characters, which are made by the customer. 150 bright LED’s supplied
with the kit. Many spectacular light effects on the message (scrolling,
blinking, rolling, panning...). Adjustable effect speed. Vertical or horizontal
position possible. Fixed displaying is possible (no effects). Different displays can be synchronised to create longer messages or to create giant
advertisements. Special housing available. Power source required: 12 to
28VDC (not included).
Part No.
32VK5600R
32VKB5600
Description
Moving Message Display
Housing for 32VK5600R
Price
$78.95
41.15
LCD MESSAGE BOARD
• Miniature message board with 16
character 1 line LCD display
• Message scrolls from right to left
with adjustable speed
• Applications: At exhibitions, for
advertising, to greet visitors at the
front door, as name tag
• 46 character message memory
• Possibility to add pauses during
scrolling
• Power supply: 2 AAA battery (not
incl.)
• Dimensions: 3.9" x 1.5" x 1.3"
ROLLING CLOCK
Nicely animated rolling time and date display. Graphic
display with 35 LEDs. Select hours, minutes, month
or day with SELECT and enter the values with SET.
Time display in 12h-mode (24h-mode when setting
clock). Fine-tune the clock by turning CV1. Dimensions: 1.8"/3.5" x 2.6"
Part No. 32VKMK119 • Price: $15.75
TRANSMITTER-RECEIVER MODULE
• Ideal for remote controls, telemetry
• Stable output
SPECIFICATIONS
SPECIFICATIONS OF
Receiver
OF RECEIVER
TRANSMITTER
— Range: 220yd in open air
— Frequency: 433MHz
— Frequency: 433MHz
— Modulation: ASK
— Modulation: AM
— Circuit Shape: SAW
— Sensitivity: 3µVrms
— Date Rate: 100kbps
— Peak Output Power: 10mW — Power Supply: 4.5-5.5V
— Power Supply: 3 ~ 12V DC DC
— Digital and linear output
Price
$9.50
7.50
ULTRASONIC SENSORS
Used for motion or distance sensing
Ideal for robotic applications
Size: 16mm dia., 12mm ht.; Lead Spacing 10mm
Range 0–20 ft.; nominal freq.: 40KHz; max input
volt: 20V; operating temp.: –4°F to 185F
Description
Ultrasonic Receiver
Ultrasonic Sensor
Miniature traffic light as used on four-way junctions. Realistic
operation with adjustable delay. 12 LEDs. Great for model
railroads, exhibitions, as a toy. Dimensions: 2.0" x 1.4" x 4.5"
• Auto power-off; Low power consumption
• Power supply: 3 AA battery operation (not incl.)
• Dimensions: 3.6” x 1.3”
Part No. 32VKK2645 • Price: $190.00
Description
Receiver Module
Transmitter Module
TRAFFIC LIGHT
ROULETTE
This kit provides an acoustic measurement of
radiation levels. The sensitivity is at its highest
for gamma rays and high energy beta rays. The
assembly is compact and may be mounted into
a small box, together with the 9V-battery.
Dimensions: 3.9" x 2.1" x 1.0"
Part No.
26MA40A5R
26MA40A5S
Part No. 32VKMK124 • Price: $14.95
Part No. 32VKMK131 • Price: $7.90
GEIGER-MULLER COUNTER
•
•
•
•
Create your own moving message. 35-LED
graphic display. Max. 16 characters. Adjustable scrolling speed. Press “SET” to change a
particular character. Press the up or down-key
to select a character and end with the “<”-sign.
Display standby function: press “Stby” (press
RUN to restart). Dimensions: 1.8”/3.5” x 2.6”
Part No. 32VKMK123 • Price $14.95
Part No. 32VKMK157 • Price: $26.50
Part No.
26VK900-6895
26VK900-6896
ROLLING MESSAGE
Price
$3.95
3.95
Transmitter
7 SEGMENT DIGITAL CLOCK
• 12/24 hour clock system
• Auto toggle function
• Easy time setting
• Easy wall mounting
• Back up battery
• Temp. readout min. - 20° C / - 4° F
max. 70° C / 158° F
• Optional Temp. Sensor sold separately
• Optional 12VAC power Sold separately
Part No.
Description
32VKK8089 Clock Kit
32VKK8067 Optional Temp. Sensor
Price
$78.95
17.90
DC TO PULSE WIDTH MODULATOR
This control circuit is ideal for the accurate
control of DC motors, lightening levels, small
heaters as well as other applications. The circuit
converts a DC voltage into a series of pulses,
such that the pulse duration is directly proportional to the value of the DC voltage. The great
advantage of such a circuit is that almost no
power is lost in the control circuit. Protected
against overload and short circuit. Dimensions: 3.4" x 1.9" x 1.8"
Part No. 32VKK8004 • Price: $22.95
Call Toll Free: 1 (800) 972-2225 • In NJ: (732) 381-8020 • Fax:
(732) 381-1006
(732) 381-1572
351
EDUCATIONAL KITS
ELECTRONIC KITS
SOUND-TO LIGHT UNIT
CAR ALARM
The alarm detects sudden voltage drops of the
battery when the interior, trunk, or hood lights
are switched on. To ensure correct operation,
a number of control indications have been
included, such as: flashing LED to indicate that
the alarm is in standby mode after a set time (after you Intermediate
have left the car). Pre-alarm (built-in buzzer) to indicate
Level
that the alarm is activated, so that you will not forget to
switch it off. The alarm is easy to switch on and off, either automatically
or by means of the ignition switch or a remote control unit. Power source
required: 12V (not included).
Part No. 32VK3504 • Price: $19.95
LIQUID LEVEL CONTROLLER
Situations such as leaking washing machines,
water level dropping in your aquarium, rain
tank or water tank suddenly dry or over flowing,
water in your cellar, etc., are often the cause
of trouble and financial burden. Prevention is
better than cure. So use this fluid detector.
This multifunctional device is easy to use in a
variety of applications:
Four high-intensity LEDs light up and react simultaneously on every sound. Applications: sound indicator, simple
sound-to-light unit for music, for hearing impaired (can
be used to indicate the telephone, doorbell). Adjustable
sensitivity with potentiometer. Built in microphone. Power
supply: 9V battery (not included).
METRONOME
Incorporated speaker included. LED beat indication. Adjustable volume and beats/minute with
potentiometers. On/off switch on board. Power
supply: 9V battery (not included).
Intermediate
This kit has been developed as pre-module for a
number of audio applications where there is insufficient input signal. Applications as a microphone
pre-amplifier or for level correction. Power source
required: 10-30VDC/10mA (not included).
Part No. 32VK1803 • Price: $12.25
Part No. 32VK2639 • Price: $24.95
FROST INDICATOR
Part No. 32VK2579 • Price: $14.95
Drive more safely in freezing weather. This kit
uses a flashing LED to indicate a road temperature
close to freezing point; below that point the LED is
on continuously. A reliable temperature sensor with
mounting stud is included. Power source required:
10-15VDC/25mA. (not included)
Beginner
Level
ELECTRONIC WATCHDOG
352
Up to 3 different time intervals (2 – 10 – 15 seconds)
can be selected for the windshield wipers of your car.
It can also be used for automatic slide projection.
Instructions/installation manual included for most cars.
Power source required: 12-15VDC. (not included)
Part No. 32VK2599 • Price:$19.95
Intermediate Level
POLICE SIREN
Create or imitate sirens of all kinds by adjusting three
trimmers. Powerful sound with an additional 2W amplifier on the PCB. Power source required: 8-14VDC/1A.
(Speaker and power supply not included).
Intermediate
Level
If you have problems in parking then this kit
is for you. Using (ultrasonic) sound waves,
whose frequency is beyond our range of hearing,
we can “measure” a distance. Consequently, a
sensor mounted at the back of the car can give an
indication of the distance between your car and the
Intermediate Level
car parked behind you or other obstacles (only at
the same height as the sensor). When the preset minimum distance is
crossed, an audible signal is generated.
Part No. 32VK3502 • Price: $49.95
Beginner Level
WINDSHIELD WIPER CONTROL
Part No. 32VK2644 • Price: $14.95
PARKING RADAR
Intermediate Level
UNIVERSAL START/STOP TIMER
Miniature timer for all applications requiring a delay of
up to 60 minutes. The control range may be adjusted.
Power source required: 15VDC/55mA (not included)
Part No. 32VK2655 • Price: $39.95
Intermediate
Level
Part No. 32VMK106 • Price: $14.95
UNIVERSAL MONO PRE-AMPLIFIER
Level
1.LED control of set fluid level: LOW, MIDDLE, HIGH
2.Controller: the relay automatically switches a pump and/or valve to
keep the fluid level between the LOW and HIGH marks
3.Alarm: if the sensor detects a level which is too high or too low (selectable), the relay will operate a bell or other alarm device
A circuit that produces a natural sounding
barking dog with a sensitive “ear” to everything that comes near it. It is a faithful
watchdog, which never sleeps and never
has to be taken out for a walk. Power
source required: 2 x 8VAC or 9-12VDC/
500mA. (not included).
Intermediate
Level
Part No. 32VMK103 • Price: $8.95
Part No. 32VK2604 • Price: $14.95
Beginner Level
AM/FM ANTENNA AMPLIFIER
Provides 22dB gain wherever you
need it. DC power supply directly
or via the coax cable. Metal housing included.
Part No. 32VK2622 • Price: $14.95
Beginner Level
DIGITAL TACHOMETER
For cars or motorcycle with a petrol engine. May be used as a general purpose
revolution counter.
Part No. 32VK2625 • Price: $39.95
ELECTRONIX EXPRESS / RSR • 900 Hart Street, Rahway, NJ 07065
Intermediate
Level
EDUCATIONAL KITS
ELECTRONIC KITS
FLASHING LED’S
ELECTRONIC CHRISTMAS TREE
• 16 blinking LEDs
• Power supply: 9V battery (not
• Very low power con- incl.)
sumption: max. 4mA
• Dimensions: 2.4” x 4.0” x 1.0”
BEGINNER LEVEL
Applications include model construction. Adjust flashing speed with
trimpots. 9V battery not included.
Part No. 32VKMK100 • Price: $7.25
CHRISTMAS TREE SMD VERSION
Part No. 32VK102 • Price: $3.50
• Miniature Xmas gadget
• 6 LEDs flash alternately
• Tree can be operated pending (e.g. from the ceiling or Xmas
tree) or can be worn as a badge (pin supplied)
• Ideal introduction to SMD (Surface Mounted Device) technology
• Some extra parts are supplied, in case some get lost or damaged
• Dimensions: 1.75” x 1.6” x 0.3”
FLASHING HEART
BEGINNER LEVEL
Part No. 32VKMK142 • Price: $10.95
28 LEDs form two blinking hearts. 9V
battery not included.
3D XMAS TREE
Part No. 32VK101 • Price: $7.50
UNIVERSAL BATTERY CHARGER
Many battery chargers are available on the market, but few of them are universal chargers. using
this kit, NiCd and NiMH batteries of different voltages and capacities can be charged both quickly
(52 minutes) and normally (14 hours). In order to
ensure that the battery is fully discharged prior
to charging and thus has a longer life cycle, an
automatic discharger is also fitted.
Intermediate Level
Part No. 32VK7300 • Price: $24.95
GUITAR PRE-AMPLIFIER WITH
HEADPHONE OUTPUT
An electric guitar cannot be connected to just
any amplifier or audio installation. This pre-amplifier has been designed for this purpose and
provides you with a headphone output, allowing you to practice without disturbing others.
Moreover, it is fitted with a special device for
Beginner Level
tone adjustment, allowing anyone to create
their personal sound. Power source required: 9V battery (not included).
Part No. 32VK4102 • Price: $26.95
REMOTE CONTROL
BY TELEPHONE
This kit makes it possible to turn up to three devices
on or off over the telephone. It is also possible to
check the condition of a switch (open or closed).
Example: when you are away on holiday, you may
Intermediate Level
switch the lights on and off from time to time, check
the alarm or turn on the heating before returning home. A major advantage of
this circuit lies in the fact that audio signals are used to tell whether a specific
output has been turned on or off. Operation is protected by a user defined
code, which is simply keyed in from the telephone keypad. .
Part No. 32VK6501 • Price: $69.95
The ultimate Xmas gadget.
FEATURES
• 16 flashing red LEDs
• Extra green and yellow LEDs provided to
customize your tree
• Can be hung and supplied through the wires
SPECIFICATIONS
• Low power consumption: 8mA
• Power supply: 9V battery operation (not
• Will operate on 12V DC (e.g. in cars, ...)
• Dimensions: 3.1" x 3.5" x 4.0"
incl.)
Part No. 32VKMK130 • Price: $7.95
SOUND GENERATOR
The ideal device for DJ’s, jingles for radio stations
or just to attract attention. With one output for direct
connection to a speaker and one line output for
connecting to a mixer panel or amplifier. The following
effects may be generated directly by means of a push
button: machine gun, European siren, phasor gun, racing car with Beginner
motor howl, screeching of car tires on a curve, explosion, mortar
Level
fire followed by explosion, music (wild charge tune or snake charmers
tune), US siren. Supply Voltage: 8-10VDC/100mA or 9V battery (not included).
Part No. 32VK4401 • Price: $34.95
MULTI-TONE CHIME
Electronic tones can be generated simply and cheaply using the
device. This kit is primarily intended for use as a replacement
for the traditional mechanical doorbell. Of course, it can also be
used for many other types of applications. The number of tones
may be selected up to a maximum of three, each of which is
output one after the other. This can be used to help locate the Beginner Level
place being called. Volume and tone can also be set. The existing bell transformer can be used as a power supply. Power source required: 6 to
9VAC/0.2A or 4.5V battery (3 x 1.5V) (not included)
Part No. 32VK6600 • Price: $27.95
CODE LOCK
This code lock may be used to switch an alarm (e.g.
car alarm K3504) on and off, or to open a door lock.
An LED on the operating panel indicates the position
of the ‘lock’. The code is easy to define. Because
the operation panel is completely enclosed, it may
be used inside and outside the house. Power source
required: 9-15VDC or 8-12VAC (not included).
Part No. 32VK6400 • Price: $34.95
Call Toll Free: 1 (800) 972-2225 • In NJ: (732) 381-8020 • Fax:
Intermediate
Level
(732) 381-1006
(732) 381-1572
353
EDUCATIONAL KITS
ELECTRONIC PROJECT LAB
ELECTRONIC PLAYGROUND 50-IN-1 EXPERIMENTS
NO TOOLS OR SOLDERING REQUIRED
MODEL EP-50
These Electronic Science Labs will teach you about
electronics from A to Z. With these all-in one labs,
you will learn about electronic parts, how to read
schematics and wiring diagrams, all the while
building up to 500 different projects. These kits use two
quick and easy hook-up methods:
Spring Method: Simply slip pre-cut wires and components into special
springs for a safe, secure connection.
Breadboard Method: Featured in our advanced kits, this system is
used by professionals and engineers. Just plug the components and
wires into the special breadboard socket holes.
• Labs come with all components and wires needed to build each project
• Easy-to-read, illustrated, lab-style manuals
• Ideal for middle schools and high schools
• Requires 9V battery
• Box Size: 10 1/4"(H) x 12 3/8" (W) x 3 5/8" (D)
Part No. 32EP50 • Price: $26.95
ELECTRIC MOTOR KIT
• This kit contains all you need to build a working
DC motor & learn its parts from the inside out!
• Wind your own armature & field coil; build the
commutator with two snap together pieces.
• It includes a 2 copper wire coils, plastic base,
field poles, armature core, brushes
& fasteners
Part No. 32SM806 • Price: $6.95
MOTOR ACTION KIT –
•
•
•
•
•
•
•
NO SOLDERING
Safe, no soldering.
Build an operational motor
Control clockwise/counter-clockwise rotation via power
Color mixing with rotating color disc
Fan using motor and power
Requires 2 “AA” batteries
Manual included
Part No. 32MX902M • Price: $11.50
AM RADIO KIT 2 IC’S
MODEL AM-780K
Easy-to-build complete radio on a single PC
board. Unique design allows you to place parts
over its corresponding symbol on the PC board. Teaches the basic theory of AM radio operation. Detailed instructions and illustrations make it
an easy and educationally sound project. Battery (9V) not included.
Part No. 3200AM780K • Price: $12.50
FM WIRELESS MICROPHONE
This kit contains a microphone with a tiny
transmitter. It can be easily built in an hour or
so. All you need, to receive it, is a standard
88-108MHz FM receiver.
Part No. 32FMWM • Price: $5.50
354
MR. CIRCUIT I LAB
As a set the product includes a manual, all of the
parts necessary to complete thirty different instructional exercises, and a solderless circuit board to
make experimentation easy, even for those who
have never touched a soldering iron. Students learn
electronics theory and the nature of electronic components. In hands-on laboratory adventure they also become familiar
with how these components function in 30 interesting electronic circuits.
Part No.
32EKIMR1
32EKIPK1
32EKICB1
Description
Price
Mr Circuit I™ Lab
$28.25/Set
Replacement Parts Kits
10.85/set
Replacement Solderless Breadboards 5.35/ea.
MR. CIRCUIT II LAB
Mr. Circuit II: Digital Magic™ is an inexpensive, effective
way of introducing students to digital electronics. Following illustrated lessons and easy-to-follow wiring diagrams,
students build working digital circuits on a solderless
circuit board. Students learn about binary numbers,
digital signals, boolean gates and how digital circuits are
designed.
Part No.
32EKIMR2
32EKIPK2
32EKICB2
Description
Price
Mr Circuit II™ Lab
$44.95/Set
Replacement Parts Kits
19.65/set
Large Replacement Solderless Breadboards 8.65/ea.
MR. CIRCUIT III LAB
THE LAWS OF DIRECT CURRENT
Mr. Circuit III Lab is available for use with or without
Mr. Circuit III Software. The Experiment Guide acts as
a lab log as the student completes laboratory exercises
that implement the principles learned. Each experiment lists objectives, equipment and procedure while
leaving room for the student to record observations and
conclusions. Includes the Experiment Guide, parts and
equipment needed to explore circuit theory “hands-on".
Part No.
Description
Price
32EKIMR3
32GUIDE3
32EKIPK3
32EKICB2
Mr. Circuit III with Multimeter
$61.95
Additional Experiment Guide
36.95
Replacement Parts Kits
9.85
Large Replacement Solderless Breadboard 8.65
BASIC ELECTRONIC
EXPERIMENTS
MODELS PK-101, PK-201
• No soldering required, just add a solderless breadboard and 9V battery.
• Performs 50 experiments including: Electronic keyboard, water alarm,
finger touch lamp, siren, metal detector, space gun, burglar alarm,
electronic kazoo plus many more.
• Requires breadboard and 9V battery or power source.
PK-201: Same as PK-101 but with computer interface. It turns your PC
into an oscilloscope and spectrum analyzer.
Part No.
32PK101
32PK201
03MB102
2800RG9
Description
1-9
10+
Basic Electronic Experiments
$19.95 16.95
Basic Exp. w/Computer Interface 35.00 33.00
830 Contact Breadboard
4.75 4.25
9V Battery
1.30 1.20
ELECTRONIX EXPRESS / RSR • 900 Hart Street, Rahway, NJ 07065
CRYSTAL RADIO KIT
EDUCATIONAL KITS
300-IN-1 PROJECTS
NO SOLDERING
WITH COMPONENTS
• Safe, no soldering.
• Build an AM radio that works without any batteries or AC
• Crystal diode converts RF to audio
• Earphone included
Part No. 32MX901 • Price $9.95
AM RADIO KIT
NO SOLDERING
• Safe, no soldering.
• Easy-to-read illustrated manual
• Teaches parts identification and how
radios work
• Receives AM radio stations. Earphone included.
• 520-1650KHz band reception. Require one 9V battery
NO SOLDERING
Includes components and panel
mounted solderless breadboard.
Circuits are created by inserting
various components into solderless breadboard and using jumper
wires. Components include IC’s,
transistors, capacitors, resistors,
trimpot, earphone, diodes. Mounted on board are LEDs, 7
segment display, antenna, transformers, speaker, switches, terminals, controls and keys. Well documented 164 page manual
describes and instructs on parts, symbols, schematics and general principals. 300 innovative kits ranging from games, lights,
sounds, alarms, detectors, timers, logic, testers, temperature,
signal generator and tracer and much more.
Part No. 32MX908 • Price: $91.90
Part No. 32MX901A • Price $12.95
SHORT WAVE RADIO KIT
NO SOLDERING
• Safe, no soldering
• Receives short wave radio signals from 6-8 MHz (SW1) and
12-18MHz (SW2)
• Explains how radios work
• Requires a 9V battery
• Safe, no soldering, educational
• Easy-to-read illustrated manual
Part No. 32MX901SW • Price: $14.95
GENERATOR ACTION KIT
ELECTRONIC PROJECT LAB
AND LEARNING CENTER
NO SOLDERING
• Build up to 500 different projects
• Learn about electronic parts, how to read
schematics, and wiring diagrams
• Save, no soldering. Great for beginners
• Spring Method: Simply slip pre-cut wires and
components into special springs for a safe, secure connection
* Build Electronic Siren, LED Strobe Light, Light Dimmer, Sound
Amplifier, Winking LED's, Sound Machine, Pencil Organ, Burglar
Alarm, AM Radio Station, Logic Tester, Metal detector
• Requires 6 AA batteries
Part No. 32EP130 • Price $37.50
NO SOLDERING
SOLDERING PROJECT KIT
• Safe, no soldering.
• Build an operating generator that creates electricity
• Teaches how a generator lights an
LED without using batteries
• Easy-to-read illustrated manual
Good soldering requires practice and an understanding of soldering principles. This kit will
help you achieve good soldering techniques,
make you familiar with various electronic components and provide you with dynamic results.
Requires one 9V battery (not included).
Part No. 3200SP1A • Price: $7.50
Part No. 32MX902G • Price $9.95
BELL ACTION KIT
NO SOLDERING
AM/FM RADIO KIT
NO SOLDERING
• Safe, no soldering.
• Teaches construction and operation of a functioning bell
• Easy-to-read illustrated manual
• Requires 2 “AA” batteries
• Learn and build you own radio kit
• Tune in your AM/FM radio stations 520–1650KHz band and
88–108MHz band
• Easy-to-read illustrated manual
Part No. 32MX902B • Price: $9.95
Part No. 32MX901AF • Price: $18.95
Call Toll Free: 1 (800) 972-2225 • In NJ: (732) 381-8020 • Fax:
(732) 381-1006
(732) 381-1572
355
EDUCATIONAL KITS
500-IN-ONE ELECTRONIC
PROJECT LAB
75-IN-1 ELECTRONICS
EXPERIMENTS
USES BREADBOARD AND
SPRING HOOK-UP METHODS
NO SOLDERING
MODEL MX-909
• No soldering required or AC voltage.
• Everything you need to build 500 exciting electronic projects.
• Learn the basics of electronics and put your knowledge to work creating 500 different electronic experiments, special lighting effects, radio
transmitter and receivers, amazing electronic sound effects, cool games
and more.
• Includes built-in breadboard for easy wiring and connection of components, and an LCD (Liquid Crystal Display) indicates the information
during the experiments in progress.
• Build your knowledge by exploring amplifiers, analog and digital circuits
plus how to read schematic diagrams.
• Includes transistors, transformers, diodes, resistors, capacitors, phototransistors, CDs, integrated circuits, speaker, earphone, LEDs, LED digit display.
• Fact-filled, illustrated, lab-style manual included.
• Requires 6 “AA” batteries.
Part No. 32MX909 • Price: $224.00
SNAP CIRCUITS™
EDUCATIONAL
Sample
KITS Screen
of
Snap Circuit™ Kits make learning
electronics a “snap”. Follow the colDeluxe Model SC-300S
orful pictures in the manual to build many projects such as AM radios,
burglar alarms, flashlights, doorbells and play electronic games
• No tools required.
• Uses “AA” batteries. (Not included)
Snap Circuits Jr.™
— Contains over 30 parts
— Build over 100 experiments
SC-300S deluxe version
— 300 projects plus 20 bonus experiments
20 bonus experiments enable learning about and using an oscilloscope
and spectrum analyzer via your windows based PC
—Contains over 60 parts that are mounted on plastic modules and
snap together with ease.
—Comes with all the interface parts you need and the software. Great
for introducing electronics through a computer.
SC-300 Standard Version
— Same as SC-300S but without bonus experiments and PC interface
— 300 experiment
SC-500 PRO
— Build over 500 projects with more than 75 parts with PC interface
— Including recording IC, FM Module, Analog Meter etc.
SC-750- EXTREME
— Build over 750 projects with more than 80 parts with PC interface
356
Description
Model SC-100 - Snap Circuits Jr.
Model SC300S - Deluxe Version
Model SC300 - Standard Version
Model SC500 - PRO
Model SC750 - Extreme
Part No. 32MX905 • Price: $34.90
SNAP CIRCUITS™
EDUCATIONAL KITS
MUSICAL RECORDER
MODEL SCP-01
Records up to 8 seconds, play music
after recording, easy to build.
SCP-01
MINI FM RADIO
MODEL SCP-02
Easy to build this FM radio.
Computer
Experiment
Part No.
32SCJR
32SCDELUXE
32SCSTANDARD
32SC500
32SC750
• Great introduction to electronics.
• Hours of fun while learning
the basics.
• No tools or soldering required.
• Fact-filled illustrated manual
included.
• Spring coil connections.
• Everything you need to build an electronic organ, timer
buzzer, motion detector, burglar alarm, water level alarm and
more.
Price
26.50
$53.00
42.95
59.95
82.95
SCP-02
MINI MOTION DETECTOR
MODEL SCP-03
Whenever somebody walks in
front of Motion Detector, the
sound of a laser comes out of the
speaker and a red light flashes.
SCP-03
MINI SPACE BATTLE
MODEL SCP-05
Exciting space battle sound
effects, laser ray and explosion
sound effects.
SCP-05
MINI FLYING SAUCER
MODEL SCP-06
Press and release the switch
and watch saucer rise into air.
SCP-06
MINI RC ROVER
MODEL SCROV-10
Build your own RC Snap Rover
using colorful snap circuits. You
will be able to navigate your
surroundings with easy-to-use
Snap Rover remote control.
Part No.
32SCP01
32SCP02
32SCP03
32SCP06
32SCROV10
Description
Musical Recorder
Mini FM Radio
Mini Motion Detector
Mini Flying Saucer
RC Snap Rover
SCROV-10
1-9
$21.75
21.75
21.75
14.90
63.50
ELECTRONIX EXPRESS / RSR • 900 Hart Street, Rahway, NJ 07065
10+
$20.75
20.75
20.75
14.20
60.50
EDUCATIONAL KITS
DIGITAL OSCILLOSCOPE
SNAP CIRCUITS
TRAINING PROGRAM
SMALL PORTABLE 1 CHANNEL 1MHZ / 10 MHZ
• In-depth explanation of electronic components. Ideal for
use in home schooling, middle school and high school
MODEL NO. SC-300R
Build over 300 projects. Project
books, student guide and teacher
guide with a case included.
MODEL NO. SC-500R
Build over 500 projects.
Project books, student guide
and teacher guide with a
case included.
MODEL NO. SC-750R
Description
Model # SC-300R
Model # SC-500R
Model # SC-750R
Part No.
01DS062
01DS082
DS 062
DS 082
Description
DS062 - 1MHz Oscilloscope
DS082 - 10MHz Oscilloscope
Price
69.95
125.00
CAPACITANCE METER KIT
Build over 750 projects. Project
books, student guide and teacher guide with a case included.
Part No.
32TRPSC300R
32TRPSC500R
32TRPSC750R
Models: DSO 062, DSO 082
Features
• 1MHz bandwidth (5 Ms/s sampling rate)Model-DSO 062
• 10 MHz Bandwidth (50Ms/s sampling
rate) - Model-DSO 082
• 100 mv/div. to 5V/div. sensitivity
- Model-DSO 062
• 10mv/div. to 5V/div. sensitivity
- Model-DSO 082
• 50V peak to peak max. input
• DC/AC coupling
• Probe and adaptor included
• Save / recall up to 4 captures
• FFT with selectable points (Model-DSO
082)
• Size: 5" x 2.7" x 1.2"; Wt. 5 oz. (DS082)
• Size: 4.3" x 2.6" x 1" Wt. 4.5 oz.
(DS062)
You will have your own capacitance
meter after successful completion of
this project.
Price
$66.95
$97.95
$124.95
SNAP CIRCUITS
ALTERNATIVE ENERGY KIT
MODEL NO. SCG-125
•
•
•
•
•
Range: 1pf – 500µF
About 1% accuracy
Automatic range switch
Zeroing available
Real time serial output of measurement read-outs with time
stamp
• Low cost and easy to build
• 8 to 16V DC power supply required (but not included)
• Size: 3" x 2.3" x 0.6"; Wt: 1.5 oz.
Part No.
32JYE06001
32JYE06002
16D9500MA
Description
Cap. Kit
Cap. Meter Assembled
9V DC Adapter
Price
$13.95
15.95
4.75
LCD TRAINER KIT
Learn about energy sources and how to "think green."
Build over 125 projects. Includes full-color manual, explains all forms of environmentally - friendly energy including: geothermal, fuel cells, wind, solar, and tidal. Contains
over 40 parts.
Part # 32SCG125 • Price: $44.95
Liquid crystal displays are used in
everything from mobile phones and
TV’s to robots. This trainer kit gives
students hands on experience. A
high quality instruction manual with
step by step colour photos teaches
students how to connect a common
LCD to a processor and program it
using free software from the internet. The basic kit comes with
everything required for students to display messages, detect
objects and build a working alarm clock.
Part No. 3200LCDTKIT • Price: $58.95
Call Toll Free: 1 (800) 972-2225 • In NJ: (732) 381-8020 • Fax:
(732) 381-1006
(732) 381-1572
357
TEST EQUIPMENT
1000-T
PORTABLE LAB STATION
FULL 2 YEAR
WARRANTY
The RSR 1000-T Lab Station provides the user with a completely self-contained
portable lab set-up featuring the most commonly used test equipment and tools.
$
PAD-234
ANALOG/DIGITAL TRAINER
Analog/Digital Trainer with onboard power
supplies to facilitate the breadboarding of
both analog and digital circuits.
Modular design permits ease of assembly
and diagnostics. Printed circuit boards are
interconnected by compact connector assemblies. Troubleshooting is simplified by
conveniently accessible test point jacks.
FTB
FIELD TECHNICIAN'S CASE
• Anodized aluminum texture finish
• Removable tool pallet with 17 pockets
• 18" long x 13" wide x 7" high
DM717
MULTIMETER
• Full featured DMM
• Hfe and capacitance checker
• Audible continuity checker
610-B
LOGIC PROBE
• TTL/CMOS compatible
• 20 - MHz logic tester, Hi/Lo and pulse
memory
SCIENTIFIC CALCULATOR
• Standard scientific functions
• Binary, octal, hexadecimal calculations
• Statistical functions
358
25500
TOOLS AND ACCESSORIES:
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Long Nose Pliers
Diagonal Cutter
Wire Stripper
Soldering Iron
Heavy Duty Soldering Iron Stand
Desolder Vacuum Pump
3 pc. Screwdriver Set
3 pc. Nut Driver Set
4 pc. Precision Screwdriver Set
4 pc. Solder Aid Set
IC Extractor
10 - gm Solder Pack
Desolder Wick
Oscilloscope Probe (IC Clip)
Oscilloscope Probe (Alligator)
10 pc. Alligator-to-Alligator Lead Set
2 pc. Banana-to-Alligator Lead Set
2 pc. Banana-to-Banana Lead Set
Any tool or component in this
kit found to be defective will
be replaced up to 2 full years
from the date of purchase.
ELECTRONIX EXPRESS
PAD 234 SPECIFICATIONS
± Variable Power supply
1 amp output current, short circuit and
thermally protected.
+ 5 Volt Power supply
1 amp output current, short circuit and
thermally protected.
12.6 VCT AC
Supply Voltage:
Function Generator:
Sine, square, triangular buffered outputs,
amplitude variable (10Vp-p maximum),
frequency adjustable in 5 ranges from 1 to
100 Khz.
Clock output:
Rise and fall times exceed 400 nanoseconds.
Breadboards:
2 breadboards, each with 840 plug-in tie
points.
Indicators:
Part No.
Prices
32RSR1000TK (PAD 234 Kit)
32RSR1000TA
(PAD 234 Assembled)
PAD 234 Kit is
Available in
3 Modules
$255.00
295.00
8 LED indicators, buffered and TTL compatible.
Logic switches:
8 binary miniature SPDT toggle switches
to switch either 0-V or +5V.
Power Consumption:
117 VAC @ 0.5 amp.
Additional Features:
3 wire grounded line cord, fuse protected
AC line, modular construction, anodized
and screened aluminum top panel with
aluminum side support brackets.
ELECTRONIX EXPRESS / RSR • 900 Hart Street, Rahway, NJ 07065
TRAINER
PAD-234 ­– DIGITAL / ANALOG TRAINER
NEW MODIFIED DESIGN
The PAD-234 Digital/Analog Trainer is a complete portable work-station. It is designed to allow you to quickly
build, modify, and troubleshoot all sorts of analog and digital circuits. Its built-in power supplies, signal sources,
and I/O features can save hundreds of dollars when compared to using separate pieces of lab equipment. For
expanded capability the supplies, signals, and I/O, along with uncommitted lines, are available at a built-in IDC
connector to allow ribbon cable connection to other boards, devices, or pieces of equipment.
The PAD-234 is a rugged, high-quality piece of equipment designed for years of use with minimal maintenance.
It’s functionality and low cost make the PAD-234 a cost-effective design tool for hobbyists and professionals.
The same features make it the ideal educational tool for student use. The modular design of the PAD-234
allows it to be incorporated in kit form into progressive quarters of a school's instructional program. Available
assembled or in kit form.
FUNCTION GENERATOR:
• Sine, square and triangular buffered outputs
• Amplitude 10V p-p output 5 frequency ranges
1-100KHz
• DC offset adjust
DIGITAL I/O:
• 8 buffered LED indicators
• 8 SPDT toggle switches 0-5V
• 2 debounced momentary switches 0-5V
• Normally Hi and normally Lo levels both available
• TTL level clock slaved to generator:
0-5V, risetime < 400nsec
ADDITIONAL FEATURES:
• 2 breadboards, each with 840 plug-in tie points
• Option to make breadboard moveable.
• Power supplies, function generator, and digital I/O available at built-in IDC connector
• High-impact plastic carrying case
• 3-wire fuse-protected line cord
• 5-way binding posts for power supplies & generator
• Input voltage 110VAC 50–60 cycles
SPECIFICATIONS:
5V Fixed Power Supply
+/- 12V Fixed Power Supplies
+/- 15V Variable Power Supplies
• Output current 1 AMP DC each
• Shortcircuit protected
• 12.6V AC CT Power Supply
Clean Streamlined Interior
• Compact Design on 2 PC Boards
• Neat, Efficient Wiring
• Sturdy Connectors
Part No. 01PAD234K • Price: $115.00
KIT FORM
Part No. 01PAD234A • Price: $155.00
ASSEMBLED
Call Toll Free: 1 (800) 972-2225 • In NJ: (732) 381-8020 • Fax:
(732) 381-1006
(732) 381-1572
359
ROBOTICS/EDUCATIONAL KITS
ELEV-8 QUADCOPTER
The ELEV-8 quadcopter
is a flying robotic
platform that is lifted
and propelled by four
fixed rotors. There are
no fixed wings; all of the
lift is created from the
rotors. Unlike standard
helicopters a quadcopter uses fixed-pitch blades, whose rotor
pitch does not vary as the blades rotate; control of vehicle motion
is achieved by varying the relative speed of each rotor to change
the thrust and torque produced by each.
The quadcopter uses a HoverFly board with a Propeller
multicore microprocessor to electronically control stabilization
of the aircraft. The benefits to this system are a stable platform,
with no mechanical linkages for a small maneuverable and agile
aircraft.
The kit provides an
inexpensive way to
get involved in the
quadcopter arena.
The kit includes;
frame, mounting
hardware, motors,
speed controllers,
propellers and the
control board for flight
stabilization. (the only
thing you need to
provide is the RC radio
equipment, battery).
We recommend a six
channel RC radio.
• Open under body for camera mounting options
• Open Source; design files available online
• Highly modifiable, for custom additions
• Modular frame for fast repair
• Protective motor mounts
• Can fly with added payloads up to 2 lbs
Part # 32PX80000 • Price: $595.00
PLAYFUL ROBOT PUPPY KIT
This kit comes with all parts
except batteries. The controller
comes with an ATmega8 but this
is easily upgradeable if required.
The sample code provided allows
the puppy to sit, shake hands, lie
down, beg and walk on it's hind
legs. This robot is fully interactive and is
controlled by hand gestures. The robot
works best with a 7.4V 2300mAH battery
as shown in the videos but it can also
work with 6x NiMh AA batteries in a 3x2
battery holder.
• Arduinocompatible for easy programming
• Controller comes with an ATmega8 (easily upgradeable)
• No soldering is required
Part # 01PRKIT • Price: $155.00
360
DESIGNER SWITCH
ASSORTMENT
15% savings over our
already low everyday pricing. Fantastic
assortment from our regular
inventory, not surplus. A
great way to try our most
popular types of switches
before ordering in quantity,
or to get a nice prototyping
supply very economically. Perfect for the classroom. Commonly
used with Arduino and many other projects. Your option on
packaging can further save money. Available in a ziplock bag,
or for a few dollars more in a durable, adjustable polypropylene
component storage case.
• Normally open push button, red top
• Norm open push button, black
• Mini toggle SPDT
• Tact switch, momentary, 1.5mm button ht
• Illuminated pushbutton, dual-in-line mount
• Mini slide SPST
• Standard (bigger) slide, SPDT center off
• Breadboard compatible slide SPDT
• Mini slide DPDT
• DIP switch, 8 position
• Magnetic reed switch
• Tilt (rollerball) switch
• Limit/snap/micro switch solder lug terminals
• Limit/snap/micro switch PC leads
• Mini toggle, SPST PC leads
• Mini toggle, DPDT solder lug leads
• Mini toggle, SPST solder lug leads
• Tact switch momentary, 5mm button height
• Right angle momentary SPDT PC leads
• Standard (bigger) toggle SPST
Part No.
Description
32SWITCHBAG
32SWITCHCASE
20 piece switch ass't in ziplock bag
20 piece switch ass't in component
storage case
Price
$15.95
19.20
ROBOTIC ARM WITH 6
DEGREES OF FREEDOM
6 Degrees of Freedom Robotic Arm
is made from 3mm thick aluminum
sheet and uses 4x D servos for the
base and the arm. The 2x micro
servos operate the wrist and gripper.
A serial interface and PC software is
included. Since the arm has a few
joints, we can imagine our human
arm.
• 6 Degrees of freedom robotic arm
• Length: 390mm
• Made from 3mm thick aluminum sheet
• Wonderful mechanical structure, and control system
• A serial interface and PC software included
• Suitable for individual development and school competition
• Requires an external 4.5V to 6V power supply for the servomotors
Part # 01RA001 • Price: $256.00
ELECTRONIX EXPRESS / RSR • 900 Hart Street, Rahway, NJ 07065
PROTOTYPING / BREADBOARD
BASIC PROTOTYPING PARTS KIT
PORTABLE PLASTIC PARTS CONTAINER
10 1/2 x 6 1/2 x 11/2; flexible division polypropylene
RESISTORS: /4W – 5 each
10 ohm, 100 ohm, 470 ohm, 1K, 2.2K, 4.7K, 10K, 27K, 47K,
100K, 220K, 330K, 470K, 1M
CAPACITORS: 50V Radial Electrolytics – 2 each
1µf, 4.7µf, 10µf, 47µf, 100µf, 470µf, 1000µf
CAPACITORS: 100V Radial DIP Mylar – 2 each
.001µf, .0047µf, .01µf, .047µf, .1µf, .33µf
CAPACITORS: 500V Ceramic Discs – 3 each
2.2pf, 4.7pf, 10pf, 15pf, 22pf, 47pf, 100pf, 220pf, 470pf, 680pf
INDUCTORS: 1 each
4.7µh, 10µh, 47µh, 100µh, 470µh, 1mh, 10mh, 33mh
TRIMPOTS: Single Turn Cermet – 1 each
500 ohm, 1K, 5K, 50K, 100K, 500K, 1M
SWITCHES: 2 each
SPDT Toggle; N.O. Pushbutton; SPDT slide, 8-Position DIP
LEDs: Standard T 13/4 size – 10 each
Red, Green, Yellow
DISPLAYS: 2 each
7-Segment Common Cathode; 7-Segment Common Anode;
INTEGRATED CIRCUITS: 2 each
7805, 7812 Regulators, LM386 Audio Amp, 555 Timer, 741 Op
Amp, 74LS00, 74LS02, 74LS08, 74LS10, 74LS47, 74LS74,
74LS86, CD4013, CD4017
ONLY
4895
$
1
TRANSISTORS: 2 each
PN2222, PN2907, 2N3055, 2N3904, 2N3906, 2N5457
DIODES: 2 each
1N4148, 1N4001, 1N34, 1N4728, 1N4733, 1N4739, 1N4743,
1N4747
IC SOCKETS: Low Profile – 2 each
8-pin, 14-pin, 16-pin, 24-pin, 40-pin
MISCELLANEOUS:
25' 22AWG Hook-Up Wire, Alligator Lead Sets (Red &
Black), 5V DIP Relay, Photo Cell, Electret Mike, Binding
Posts (Red & Black), Tip Jacks (Red & Black), Heat Sinks
(TO-5 & TO-18), 1.5 Amp 100V bridge, 4 Amp 200V SCR
LARGE STORAGE CABINET: (Additional Option)
Parts Storage Cabinet, 11 1/4" x 12" x 6" –
30 drawers
Part No.
32BPPK
061130
Description
Prototyping Parts Kit
Large Storage Cabinet
Price
$48.95
38.98
BASIC PROTOTYPING PARTS KIT II
PORTABLE PLASTIC PARTS CONTAINER
10 1/2 x 61/2 x 11/2; flexible division polypropylene
RESISTORS: 1/4W – 5 each
220 ohm, 470 ohm, 680 ohm, 1.5K, 3.3K, 6,8K,
15K, 33K, 56K, 68K, 150K, 270K, 390K, 560K, 2.2M
CAPACITORS: Radial Electrolytics – 2 each
2.2µF, 22µF, 33µF, 220µF, 330µF, 2,200µF
CAPACITORS: 100V Radial DIP Mylar – 5 each
470pF, .001µF, .0022µF, .0033µF, .0047µF, .0068µF
CAPACITORS: 100V Radial DIP Mylar – 2 each
.01µF, .022µF, .033µF, .068µF, .22µF, .47µF
TRIMPOTS: Multi-Turn, Precision Bourns 3006P Series Style – 1 each
100Ω, 200Ω, 2K, 10K, 20K, 1M
POTENTIOMETERS: 2 each of following
1.5 K ohm panel mount 1/2W with 3/8" shaft, solder lug terminals
10K panel mount 1/2W with 1" shaft, solder lug ternimals
100K PC mount with 1: shaft
IC SOCKETS: Wire Wrap Sockets – 1 each
8 pin, 14 pin, 16 pin, 24 pin, 40 pin
PERF BOARDS: 1 each of following
3" x 4.5" (29 x 44 holes) and 4.5" x 6.5" (44 x 64 holes)
INTEGRATED CIRCUITS: 1 each of following
7905, 7912 (regulators), LM380 audio amp, 556 dual timer, 1458 dual
comp. op amp, LM324 low power quad op amp, 74LS04, 74LS20,
74LS32, 74LS90, 74LS174, CD4001, CD4011, CD4071, CD4511
WITH COVER
DIE CAST BOXES
SIZE A: 1.13" X 1.50"
SIZE B: 1.38" X 2.25"
Ideal for circuitry prototyping. Securely seal signal sensitive cables and wires.
ONLY
4995
$
TRANSISTORS: 2 each
MPSA20, PN3638, TIP31, TIP32, 2N4401, 2N4402
SCR, TRIAC, DIAC, BRIDGES: 2 each
2N5060 SCR, Q200E3 Triac, ST2 Diac, 1A 100V DIP
bridge rectifier, 4A 100V bridge
LED’S:
Bi-Polar (2 each), Rectangular red (10 each), mini
3mm red, green and yellow (10 of each color), 2
each 7 segment Display (08NSN584), 1 each bar
graphs red (08DC10IDA), green (08DC10GDA) yellow
(08DC10YDA)
SWITCHES: 2 each
SPDT center off toggle, DPDT slide
MISCELLANEOUS:
AC to DC wall plug adaptor, buzzer, speaker, DC motors (2 different voltages), 9V battery snap
Part No. 32BPK2 • Price: $49.95
Part No.
033753
033751
033752
032417
033230
033231
Size
Connectors
A —
A
BNC (F) to BNC
A
BNC (F) to BNC
B —
B
BNC (F) to BNC
B
BNC (F) to BNC
Call Toll Free: 1 (800) 972-2225 • In NJ: (732) 381-8020 • Fax:
(F)
(M)
(F)
(M)
(732) 381-1006
(732) 381-1572
Price
$7.95
27.95
25.95
7.25
21.35
25.95
361
EDUCATIONAL KITS
LAB MANUALS
HANDS-ON ELECTRONICS EXPERIMENTS
BOOK ONE - TM101 MANUAL FOR TRONIX 1
FUNDAMENTAL CONCEPTS
• Explains exactly what each component does
• Clear instructions for each lesson
• 40 interesting “no-soldering” experiments
• Enhances understanding of components and circuits
• Provides great base for further skills and knowledge
• Components sold separately
BOOK TWO - TM202 MANUAL
FOR TRONIX 2
BASIC DIGITAL CONCEPTS
•
•
•
•
•
•
•
•
39 digital related “no-soldering” experiments
Perfect for classroom
Discusses digital terminology
Understanding digital vs. analog
Wide ranging coverage of gates, timers, counters, displays and much more
Create popular circuits such as “touch-activated switch”, “yes/no/maybe”
Decision maker, “logic probe” circuit, UP-DOWN counter and much more
Components sold separately
BOOK THREE - TM303
MANUAL FOR TRONIX 3
OSCILLATORS & AMPLIFIERS
• Step-by-step instructions and clear explanatory detail
• 5 Lab Lessons and Experiments
• Covers Applications, transistors in oscillators, tubes, transistors as amplifiers,
• audio amplifier systems
• All solderless breadboard experiments
• Components sold separately
ELECTRONICS MERIT
BADGE WORKBOOK
• Written specifically to help scouts be awarded their
merit badge
• Follows Electronics Merit Badge requirements exactly
• Includes worksheet check list and counselor sign-offs to track progress
• Contains some projects which require some light soldering and testing. an
inexpensive package containing a soldering iron, stand, solder and digital
multimeter is available under part #32BBKITTK.
• Contains 060512 solder iron, model 820B digital multimeter, solder pack
060700 and solder stand 060840
• Components, solder projects, solder iron/solder & meter sold separately
Part No.DescriptionPrice
31TM101Tronix 1 Experiment Book $ 19.95
31TM202Tronix 2 Experiment Book $ 19.95
31TM303Tronix 3 Experiment Book $ 19.95
31TMB01Tronix Merit Badge Book $ 19.95
32BBKITTK
Solder tools, Supplies, Meter
$ 12.70
362
TRON.IX LABS (1, 2, & 3)
• Cool experiments and lessons
• Kits complete with books and parts
• Classroom friendly, no soldering required
TRONIX 1 LAB –
Fundamental Concepts
“Electronics for Robotics”
Lab
40 great experiments to learn basic
electronics fundamentals quickly. Well
written and perfectly illustrated manual for hands-on labs. Build
over 40 really interesting experiments and circuits. Teaches how
various components function, such as resistors, pots, photocells,
caps, speakers, semiconductors, etc. Just of few of the
experimental circuits include burgler alarm, variable speed lights,
police siren, moisture detector, morse code oscillator, insanity
alarm game, electronic organ and more. Basic electronics
lessons include Ohm’s Law, Resistors in Series and Parallel,
Voltage Measurement and more. Complete with everything
needed including battery and manual.
Part No.DescriptionPrice
32TRONIXLAB1 Tronix 1 Lab complete kit
$28.25
Fundamental Concepts
Electronics for Robotics Lab
TRONIX 2 LAB – Basic
Digital Concepts and Op
Amps Lab
39 lessons and hands-on experiments
to introduce digital electronics to
students, technicians and robotics
enthusiasts. Each experiment is complete with a lesson showing
drawings and diagrams explaining the concepts of digital electronics.
Covers CMOS and linear Op Amp IC’s, gates, flip-flops, schmitt triggers,
shift registers and more. Circuits to build and experiments include Logic,
Counters, Digital Read-Outs, Chaser Lights, Light Activated Counter and
more. Complete with everything needed including battery and manual.
Part No.DescriptionPrice
32TRONIXLAB2 Tronix 2 Lab complete kit
$44.95
Basic Digital Concepts and
Op Amps Lab
TRONIX 3 LAB – Basic
Electronics Oscillators
and Amplifiers Lab
95 page illustrated manual instructs
hands-on-style exactly how basic
electronics oscillators and ampliers work. Create all kinds of sound
and light displays. Covers Transistors as Amplifiers, Audio Amplifying
Systems, Transistors in Oscillators and Oscillator Applications. Even
includes Vacuum Tube theory. Question and Answer section in each
lesson. Complete with everything needed including battery and manual.
Part No.DescriptionPrice
32TRONIXLAB3 Tronix 3 Lab complete kit
$39.95
Basic Electronics Oscillators
and Amplifiers Lab
ELECTRONIX EXPRESS / RSR • 900 Hart Street, Rahway, NJ 07065
EDUCATIONAL KITS
ELECTRONIC KITS- NO SOLDER,BATTERY OPERATED
Safe! Fun! Educational! Complete with solderless breadboard, components, schematic
and breadboard layout. 9V battery not included
NIGHT LIGHT KIT
The Night Lite kit uses a photocell to turn on and
off LEDs. This kit teaches students the principles
behind photocell technology
Part No. 3200NLK • Price: $4.50
WATER DETECTOR
The Water Detector kit uses a 555 timer IC
to generate a tone when water or moisture is
detected
Part No. 3200MOSDET • Price: $4.50
HEADS OR TAILS KIT
In the Head or Tails game when the button is
pressed, LEDs light up to indicate Heads or Tails.
The objective of the kit is to show how a clock
circuit works in digital electronics.
Part No. 3200HDTL • Price: $4.50
VOICE CONTROL SWITCH KIT
This Circuit is designed to produce an audio
(voice) signal that is switch-controlled. The circuit
utilizes a relay, transistors, and a microphone
that picks up the audio signal. The audio signal
in turn activates the relay which generates an
eletrical signal that turns an LED on or off.
Part No. 3200VCSK • Price: $4.75
VOICE CHANGER KIT
The Voice Changer kit enables the user to change
the tone of his/her voice. The tone frequency in
the circuit can be adjusted up or down to affect
the tone change of ones voice.
Part No. 3200VCHANG • Price: $5.50
SIGNAL GENERATOR
The Signal Generator kit output sine wave,
triangle, and square waveforms. The signal
frequency is about 1 kHz.
Part No. 3200SGEN • Price: $5.50
MOISTURE DETECTOR
The Moisture Detector kit utilizes a 555 timer IC
circuit to detect high or low moisture levels in soil.
The rate of flash of an LED indicates moisture
level..
LIE DETECTOR KIT
The circuit for the lie detector is a two-transistor oscillator. The objective of the ikit is to
detect small changes in skin resistance, moisture, tension etc. that will cause the emitted
frequency to change.
Part No. 3200LEDET • Price: $4.50
REACTION TESTER KIT
The Reaction Tester is based around the 555
timer IC. The kit is designed to test and expand one's sense of timing. The students need
to synchronize their reaction time to press the
button in time to keep the LED lit or else it
goes out.
Part No. 3200RATSK • Price: $4.50
SIREN ALARM KIT
The Siren Alarm kit uses a 555 timer IC circuit
to generate a high pitch siren or alarm sound.
Part No. 3200PSSRN • Price: $4.95
FUN LIGHT KIT
Lights move left to right one at a time or in
groups. Movement speed can also be controlled.
Part No. 3200FNLTKT • Price: $4.50
Part No. 3200SGEN • Price: $5.50
Call Toll Free: 1 (800) 972-2225 • In NJ: (732) 381-8020 • Fax:
(732) 381-1006
(732) 381-1572
363
EDUCATIONAL KITS
ELECTRONIC PIANO KIT
Do you enjoy listening to classical music? Do you
have the skills to play a musical instrument?
Have hours of fun learning to play
musical tunes on the Electronic
Piano. The Electronic Piano kit
features an 8 ohm speaker and 8 push
button switches where you can play the
musical scale:
“Do, Re, Mi, Fa, Sol, La, Si, Do”.
Also you can change the pitch of the tune by using the Frequency
Range switch. This is an intermediate level soldering kit that contains
all component parts for you to successful build your own Electronic
Piano. You might even discover your hidden musical talent! A 9V
battery is required for operation, optional 9V/400mA wall adapter
available. (Not included)
EMOTIONAL HEART KIT
The Emotional Heart kit is a beginner
soldering kit. This kit contains a heartshaped pcb and 12 red LEDs that
flash in a random pattern. A
unique and interesting feature is
in the center of the heart where
the user can touch the board to
increase the flashing rate of the
LEDs.
This kit would be a fun kit to play as a game. You can simulate
the finger of a girl touching the heart of a boy and see the
flashing rate of the LEDs speed up. All component parts
are included with the kit. A 9V battery is required, optional
9V/400mA wall adapter available. (Not included)
Part No. 32PMW270018 • Price: $7.95
Part No. 32PMW270032 • Price: $7.95
COLORFUL FLASHING
CHRISTMAS TREE KIT
Bring the magic of the holiday season into full view with this Flashing
Christmas Tree kit. This kit will thrill
both beginner and hobby enthusiasts. This is a very simple circuit
with big fun. Twelve LEDs, from L1
to L12 flash in brilliant color and in
a random pattern. Assembly is required and all component parts are
included. A 9V battery is required,
optional 9V/400mA wall adapter available. (Not included)
Part No. 32PMW270014 • Price: $7.50
COLORFUL FLASHING STAR KIT
The Colorful Flashing Star kit is
an intermediate level soldering kit.
Impress both your family and friends
in soldering this kit together. This
simple circuit features 20 RGB flashing LEDs – the LEDs from L1 to L20
flash in brilliant changing colors and
in a random pattern. All component
parts are included with the Colorful
Flashing Star kit. A 9V battery is
required, optional 9V/400mA wall adapter available. (Not included)
DUAL RAIL VARIABLE DC
POWER SUPPLY KIT
This intermediate level soldering kit can
be useful as a power source for many
electronic circuits. All component
parts are included with the kit.
Input DC +3 to +15V
Features:
• Wide power supply range:
• Single supply, 3V to 32V
• Or dual supplies, +/- 1.5V to +/- 16V
• Two independent, high gain internally frequency op amps
• Positive and negative variable dc power supply
• Two adjustable potentiometers
• Input and output terminal blocks
• On / off switch
• Board dimensions: 3”(L) x 1.75”(W)
Part No. 32PMW270037 • Price: $7.50
LED LAMP WITH THREE
SWITCH CONTROL
• Input: 120 – 240VAC / 60Hz
• Output: 9V / 400mA
• 1/8” mono male plug, center
positive
This LED Lamp with three switch
control is a very simple LED
lamp kit. This intermediate level
soldering kit features 32 super
bright white LEDs, 16 resistors,
a diode, and three switches.
The user can turn on the LEDs
in three different ways using the
control switches. In addition, the
LED lamp kit can be used in a practical way as a flashlight or
night light. All component parts are included with the kit. A 9V
battery is required, optional 9V/400mA wall adapter available.
(Not included)
Part No. 16DPMW270013 • Price: $5.95
Part No. 32PMW270033 • Price: $8.50
Part No. 32PMW270026 • Price: $8.90
OPTIONAL WALL POWER
ADAPTER
364
ELECTRONIX EXPRESS / RSR • 900 Hart Street, Rahway, NJ 07065
EDUCATIONAL KITS
DC VOLTAGE
MONITOR
SUPER BIG EAR AMP WATER ALARM
If battery status is
important, you need
this kit. This kit uses
7 LEDs; monitor 12v
DC, 1v, 1/2v, or 1/4v
steps. Monitor 8v or 5 v in 1/4 v steps. Great
for boats, motor homes, model planes or
racing car ni-cads. All parts and instruction are
included. Size: 1.3" x 2.7".
Listen through walls,
hear conversations
across the room. Add
a parabolic reflector
and hear blocks
away. The BIG EAR
can be hidden about anywhere. Makes an
ultra sensitive intercom. Can also be used as
a 1.5W AMP. We supply a mini-electret mike
in the kit. Power requirement 6 to 12v DC.
Size: 1.75" x 1".
Part No. 31ERVM1 • Price $7.75
Part No. 31ERAA1 • Price $10.50
CABLE FILTER KIT
LIE DETECTOR
Multi-pole four stage notch filter
eliminates picture distortion and the
annoying “beep..beep” found on premium cable channels between 2 and
22. Connect between incoming cable
or convertor and TV/VCR. Works with
or without a cable converter. Can
be used on standard 75 ohm antenna systems to remove any single
channel (requires 2 filters). This kit
sold for educational purposes only.
Requires permission of local cable
co. to use.
Part No. 31ERDF222 • Price $14.75
RELAY POWER KIT
INCREASE THE OUTPUT OF ANY
KIT FROM 100 MA TO 3 AMPS
If you need to
switch more
power, up to
300 Watts,
with the Light
This kit can be great
fun at parties. Lie and
an audible tone will
change. The more you
lie the louder the tone.
When you lie your
hands sweat. This kit
allows you to measure these changes; only a very slight amount
of change will cause the tone to increase in
frequency. Power requirement 6 to 12 v DC.
Size: .8" x 1.2".
Part No. 31ERLD1 • Price $9.75
VOICE ACTIVATED
SWITCH
The VOX circuit can
be used to operate a
tape recorder, ham
radio, CB radio, or
turn on an alarm. The
VOX-1 kit has 100MA of output that operates
a relay, light, motor. What could you do with a
sound activated switch? Power requirement 7.5
to 18v DC. Size: 1.5" x 1.3"
Part No. 31ERVOX1 • Price $6.75
Liquid level sensor. When fluid
reaches sensor, 100mA output
can trigger a relay (not included) which in turn can activate
(or turn off) a sump pump.
Wall transformer included
Part No. 32ERWA2 • Price: $17.75
BUSY PHONE LIGHT
Add this little kit to
any or all of your
telephones. When
one phone is used, a
red LED will light on
the other extension.
This lets everyone know
when your computer modem is in use. Power
requirement 9v DC. Size: 1.1" x .6"
Part No. 31ERTELLITE • Price $9.75
ELECTRONIC TIMER KIT
Use this kit in
A-STABLE (continuous train of pulses)
or in the MONO-STABLE (triggered time
delay). Times circuits
from nano-sec. to 30 min. Comes with variety
of resistors and capacitors suitable for most
applications. Power requirement: 4.5 to 12v
DC. Size: 9" x 1".
Part No. 31EREBTD-9 • Price $11.50
LIGHT GENIE
Turn anything on or off with
light. Turns on at night, off
at daylight automatically. As
the light touches or leaves
the sensor it delivers 100mA of output to run
a relay. Size: 1.5" x 1.2". Power requirement
6 to 15v DC.
TRIAC POWER KIT
Part No. 31ERLG2 • Price $7.50
INCREASE THE OUTPUT OF ANY
KIT FROM 100 MA TO 4 AMPS
TEMPERATURE GENIE
Genie, Temperature Genie, Timer
or Vox kits, use the Relay Kit. We
supply a two pole relay 1.5 Amps
ea. Tie both poles together and
get 3 Amps. Size .75" x 2".
Connect to any of
the Light Genie,
Temperature Genie,
Vox or Timer kits,
and operate up to
400 watts of power.
The Triac is best suited for resistive load applications such as heaters and
lights. Size: .75" x 2"
Part No. 31ERRP1 • Price: $9.75
Part No. 31ERTP1 • Price: $9.75
Ever lost frozen food
because your freezer
stopped? The TC-2 kit
would have saved you
money. An alarm activates
when the temperature reaches a critical point.
Turn ceiling fans on automatically when it gets
too hot. This kit gives you 100mA of output.
Size: 2" x 1/4" Power requirement 6 to 15v DC.
Part No. 31ERTC2 • Price $7.50
Call Toll Free: 1 (800) 972-2225 • In NJ: (732) 381-8020 • Fax:
(732) 381-1006
(732) 381-1572
365
EDUCATIONAL KITS
FM WIRELESS
MICROPHONE
AUTOMATIC STREET
LIGHT KIT
• This kit simulates a street light
• Light turns on after evening and turns off
in the morning
This kit contains a microphone
with a tiny transmitter. It can be
easily built in an hour or so. All
you need, to receive it, is a standard 88-108MHz FM receiver.
Part # 32PWM270006 • Price: $5.95
Part No. 32FMWM • Price: $5.50
AC/DC POWER SUPPLY KIT
OPTICAL
AUDIO LINK
MODEL K-11
Low cost 1 to 15V variable Power Supply.
It can be used to supply power to transister
radio, tape recorder and electronic games
etc.
Features:
DC Output - 0-15V @ 250mA
AC Output - 8.5Vac @ 500mA
Size: 3" (W) x 3 3/8" (L)
Easy to assemble voice link. Transmitter and receiver on separate PC
boards. Great for learning the basics of fiber optic communications.
Includes fiber optic devices, cable and connector. Requires 2 – 9V
batteries (not included).
Part No. 3200OK726 • Price $13.90
TRANSISTOR/DIODE TESTER
Part No. 32VPS-1 • Price: $14.50
VARIABLE VOLTAGE
POWER SUPPLY KIT
Includes:
Input Voltage: 20VAC
Output Voltage: 1.25 VDC ~
15VDC
Output Current:
0.5A @8V,
0.3A @ 12V,
0.2A @15V
Deluxe
kit includes
all components,
transformer, power cord and case.
Part No.
3200XP15
1-9
$17.95
10+
$16.50
DC TO DC CONVERTER KIT
Generates regulated +12V and -12V
voltages from a 9V source such as
a 9V battery. This kit is designed
to teach the basics of switchmode
circuits. You wind your own toroidal
transformer. Test points are provided
to view switching waveshapes on an
oscilloscope. An on-board 1 Ohm
resistor in series with ground allows
measurement of current drawn from
9V supply. Calculate efficiencies at
various loads. Outputs can have an
isolated ground or a common ground
with input via jumper.
Part No. 3200DCCONKIT • Price: $19.50
Build your own diode/transistor tester.
This tester allows checking of transistors
and diodes in circuit. You can identify
NPN or PNP transistors. Also check all
types, small or large power transistors.
Identifies anode or cathode of diodes.
Part No.
32TDTKIT
32TDTASM
Description
Kit
Assembled
Price
$22.95
34.95
FUNCTION
GENERATOR
Provides sine, square or saw tooth
waveforms continuously variable 1Hz to
1MHz. Amplitude adjustable to 3V peak
to peak. Complete with parts, PC board,
schematic, deluxe case with handle and
extensive assembly manual.
Product size assembled, 5-3/4(L) x 3-3/4(W)
x 1-1/2(D) inches and weight 0.94 lbs.
Part No.
Description
32FGKIT
Kit Version
32FGSMTKIT
Kit Version w/Surface Mount
Components
32FGASM
Assembled Version
48.95
MOTION DETECTOR KIT
Compact and portable. Adds safety to
your home or office. Learn the basics
of motion detector technology. Uses a
pyroelectric infrared sensor. Simple and
fun to build. Battery operated. Complete
with all parts, PC board, case, schematic, and extensive training manual.
Part No. 32KMD • Price $18.95
366
Price
$32.95
37.95
ELECTRONIX EXPRESS / RSR • 900 Hart Street, Rahway, NJ 07065
EDUCATIONAL KITS
AM RADIO KIT
SOLDER PRACTICE BOARD
MODEL 3200SPB3
MODEL AM-550
The RSR Solder Practice
Board is designed to teach tech
enthusiasts, beginner students,
and hobbyist to learn the basics of
good soldering techniques. The
soldering kit contains a variety of
component parts, including resistors,
diodes, integrated circuits (ICs), and
capacitors, that can be soldered to the printed circuit board (PCB) to
practice soldering.
Once the soldering techniques are learned, the main portion of the
PCB and its component parts can be soldered to the board. The
main PCB circuit is a police siren. When the switch is in the “ON”
position, you will hear the shrill of a siren while the green and red
LEDs will blink on and off simultaneously. Test your work by using a
9V battery (not included).
Board dimensions: 3.75” x 2.00”
Part No. 3200SPB3 • Price: $4.95
NIGHT LIGHT KIT
It uses a photo cell to turn on or off LED.
Part No. 3200NTLTKIT • Price: $3.50
VOICE CHANGER
This kit will enable you to
change tone of your voice.
With the push of a switch,
the tone frequency can be
adjusted up or down, or
change to a robot’s tone.
Part No. 32VC • Price $10.95
SOUND ACTIVATED KIT
Clapping your hand or shouting
will activate LED's to say "ILU"
Part # 32PWM270010 • Price: $9.90
10 1/2" x 31/2" PC board, 28-page manual divided into 54 sections;
RF, 1F, oscillator, detector and audio circuits.
Part No.
32AMR
Description
With Trans Amp
Price
$18.95
AM/FM SUPERHET
RADIO KIT
MODEL AM/FM108CK
CONTAINS TWO
SEPARATE AUDIO
SYSTEMS: IC &
TRANSISTOR
• Advanced kit, requires soldering
• 63 page educational instruction manual
complete with quiz questions, soldering tips,
component identification, conversion charts
• Coverage includes but not limited to:
alignment, static and dynamic measurement,
• Bandwidth tests conveniently features two separate
audio sections to accommodate instructors who
prefer either IC or transistor design
Part No.
Description
Price
32AMFM108CK with IC & Transistor $26.95
VU METER LIGHT
LED's would light up according to
the sound level of the speaker
Part # 32PWM270009 • Price: $7.90
E FIELD SENSOR KIT
FLASHING COLORFUL
CROSS
This kit is a low cost E Field
sensor by detecting the E field on
electromagnetic waves
This is a simple circuit with big fun.
The LED from L1 to L2 will flash in
a colorful and random manner
Part # 32PWM270004 • Price: $5.95
Part # 32PWM270002 • Price: $7.95
Call Toll Free: 1 (800) 972-2225 • In NJ: (732) 381-8020 • Fax:
(732) 381-1006
(732) 381-1572
367
EDUCATIONAL KITS
COMPLETE WITH PC BOARD AND INSTRUCTION BOOKLET
DICE PROJECT
SOLDER
PRACTICE KIT
Can be used with any game of chance.
Uses a 9V battery (not included).
Part No. 3200EDP • Price: $5.95
ANALOG
METER KIT
For details see Model
No. 01AMK200 on
EQUIPMENT PAGE 23.
Part No.
1-9
01AMK200
10+
$18.95 $17.95
For details see Model
2666K on EQUIPMENT
PAGE 8
10+
$36.95
METAL DETECTOR KIT
Find new money
and old treasure.
Get started in the
fascinating hobby of
metal detecting.
Part No. 3200MDK • Price: $7.25
ROULETTE
• Auto power-off;
Low power consumption
• Power supply: 3 AA bat-
tery operation (not incl.)
• Dimensions: 3.6” x 1.3”
Part No. 32VKMK119 • Price: $15.95
368
Learn all about soldering techniques
while building this project. Uses a 9V
battery (not included).
Lights move left to right one at a time or
in groups. Insert 9V battery to turn Fun
Lights on. Movement speed can also be
easily controlled. (Battery not included)
Part No. 3200SPB2 • Price: $3.95
Part No.
Descr.
Price
LED ROBOT KIT
3200FUN LIGHT
3200SMTFUN
Regular Kit
Surface Mount
Version
$4.95
5.95
This project teaches
you about free-running oscillators. You
will have fun building, displaying, and
learning, about LED
Robot Blinkers.
FM MICROPHONE KIT
Transmit your voice on
any FM radio. Range
up to 100 feet. Case
included.
RESISTOR
SUBSTITUTION
BOX KIT
WITH CAPACITANCE/
HFE CHECKER
1-9
$38.95
ALSO AVAILABLE IN SURFACE
MOUNT VERSION
Part No. 3200LRK • Price: $5.95
DIGITAL
MULTIMETER
KIT
Part No.
01DMM2666K
FUN LIGHTS
Part No. 3200FMMIC • Price: $12.95
FLASHING
COLORFUL
CROSS
This easy-toassemble kit
contains 24
different value
resistors from
10 ohms to 1M
ohms.
This is a simple circuit with big fun. The LED
from L1 to L2 will flash in a colorful and random
manner
Part # 32PWM270002 • Price: $7.95
Part No.
Prices
3200SUBK (Kit)
3200SUBA (Assembled)
$13.95
21.95
FLASHING
CHRISTMAS
TREE
LED's will flash in a colorful and random manner
CAPACITOR
SUBSTITUTION
BOX KIT
Part # 32PWM270001 • Price: $6.25
POWER
SUPPLY
KIT
This easy-to-assemble kit contains 24 different
value capacitors
from 100pf to
.1µfd.
MODEL 3010K
Part No.
Prices
32CSBK (Kit)
32CSBA (Assembled)
$14.95
23.95
Three supplies +1.5V to +15V ; -1.5V to
-15V ; +5V. Short circuit and overload
protected.
Part No. 01PS3010K • Price: $67.90
ELECTRONIX EXPRESS / RSR • 900 Hart Street, Rahway, NJ 07065
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement