INSTALLER SOLUTIONS CATALOG 2014
INSTALLER SOLUTIONS
KRAMER ELECTRONICS, Ltd.
3 Am VeOlamo St.
Jerusalem, Israel, 95463
Tel: + 972 732650200
Fax: + 972 2 653 5369
E-mail:[email protected]
Web:www.kramerelectronics.com
KRAMER ELECTRONICS SWEDEN AB
Arendalsvägen 22
434 39 Kungsbacka, Sweden
Tel: + 46 300 43 18 10
Fax: + 46 300 43 17 19
E-mail:[email protected]
Web:www.kramersweden.com
KRAMER ELECTRONICS USA, Inc.
HEADQUARTERS
6 Route 173 West
Clinton, NJ 08809, USA
Tel: (908) 735 0018
(888) 275 6311
Fax: (908) 735 0515
Tech Support after 6pm EST:
(888) 275 6311
E-mail:[email protected]
Web:www.kramerus.com
KRAMER ELECTRONICS FINLAND
Höyläämötie 10, Helsinki,
00380, Finland
Tel: + 358 (0)9 315 79220
E-mail:[email protected]
Web:www.kramerav.fi
SIERRA VIDEO INTERNATIONAL,
SALES & TECHNICAL SUPPORT
PO Box 2462, Grass Valley, CA, 95945, USA
Toll-free: (888) 886-8875
Tel: (530) 478-1000
Fax: (530) 478-1105
E-mail:[email protected]
Tech Support – Worldwide:
Tel: (530) 478-1000
After Hours: (530) 888-3195
E-mail:[email protected]
Web:www.sierravideo.com
KRAMER ELECTRONICS EUROPE SA
Rue du Roussart, 2
B-1410 Waterloo, Belgium
Tel: + 32 2 357 01 40
Fax: + 32 2 357 01 49
E-mail:[email protected]
KRAMER ELECTRONICS UK, Ltd.
2 Premus, Coldharbour Way,
Aylesbury, Bucks. HP19, 8AP, UK
Tel: + 44 1296 330011
Fax: + 44 1296 330055
E-mail:[email protected]
Web:www.kramerelectronics.co.uk
KRAMER ELECTRONICS FRANCE S.A.S.
Z.I de la Bonde - Parc de la Roseraie - Bat F
15 rue du Buisson aux Fraises,
91300 Massy, France
Tel: + 33 (0)1 69 75 29 80
Fax: + 33 (0)1 60 11 76 94
E-mail:[email protected]
Web:www.kramerfrance.com
KRAMER ELECTRONICS ITALIA S.R.L.
Via Cesare Cantù, 25
20092 Cinisello Balsamo(MI), Italy
Tel: + 39 02 66594771
Fax: + 39 02 61296221
E-mail:[email protected]talia.com
Web:www.krameritalia.com
KRAMER ELECTRONICS ESPAÑA S.L.
C/ Sierra De Gata 9 Nave 4
San Fernando De Henares
28830 Madrid, Spain
Tel: + 34 917478410
Fax: + 34 917473409
E-mail:[email protected]
Web:www.kramerspain.com
KRAMER GERMANY GMBH
An Fürthenrode 59
52511 Geilenkirchen, Germany
Tel: + 49 (0) 2451 91161 0
Fax: + 49 (0) 2451 91161 10
E-mail:[email protected]
Web:www.kramergermany.com
KRAMER ELECTRONICS SWITZERLAND AG
Sägereistrasse 7
8834 Schindellegi SZ, Switzerland
Tel: + 41 (0)44 787 04 04
Fax: + 41 (0)44 787 04 05
E-mail:[email protected]
Web:www.kramerav.ch
Cat. no. 2902-000772
KRAMER ELECTRONICS POLSKA SP. Z O.O.
ul.Okrzei 1 A
03 -715 Warszawa, Poland
Tel: + 48 22 333 80 31
Fax: + 48 22 333 80 30
E-mail:[email protected]
Web:www.kramerpoland.com
KRAMER ELECTRONICS CANADA, Ltd.
4450 Corporate Drive, Unit 5
Burlington, ON, Canada
L7L 5R3
Tel: (905) 592-9739
Fax: (905) 592-9762
E-mail:[email protected]
Web:www.kramercanada.ca
KRAMER ELECTRONICS MEXICO
Félix Parra No. 171
Col. San José Insurgentes
03900 México D.F.
Tel: + 52 (55) 5523 0604
+ 52 (55) 5523 0629
Fax: + 52 (55) 5543 5945
E-mail:[email protected]
Web:www.kramermexico.com
KRAMER LATIN AMERICA
Tel: + 1 305 600 4726
Tel: + 1 212 300 5188
E-mail:[email protected]
Web: www.kramerlatinamerica.com
KRAMER DO BRASIL COMÉRCIO
DE ELETRÔNICOS LTDA
Av. Lacerda Franco, 1550, Cambuci
São Paulo, SP, 01536-001, Brasil
Tel: + 55 11 3926-9435
E-mail:[email protected]
Web: www.kramerbrazil.com
KRAMER ELECTRONICS CHINA
Rm 1405, NO.798 Zhao Jia Bang Rd,
Shanghai 200030, China
Tel: + 86 21 64453139,
+ 86 21 64453136
Fax: + 86 21 64455934
E-mail:[email protected]
Web:www.kramerchina.com
KRAMER ELECTRONICS KOREA
#201 HyeopSung Bldg
309-148, Seongsu-dong 2Ga,
Seongdong-gu
Seoul, Korea
Tel: + 82 2 467 4747
Fax: + 82 2 467 4750
E-mail:[email protected]
Web:www.kramerkorea.com
KRAMER ELECTRONICS HONG KONG, Ltd.
Unit 302A, 3rd Floor, Park Building,
No. 476 Castle Peak Road
Kowloon Hong Kong
Tel: + 852 3698 2972-4
Fax: + 852 3698 2975
E-mail:[email protected]
Web:www.kramerelectronics.com
KRAMER ELECTRONICS INDIA PVT, Ltd.
Unit - 102, 1st Floor,
18/9, Saleh Centre,
Cunningham Road,
Bangalore - 560052
Karnataka, India.
Tel: + 91 80 4148 5388
Fax: + 91 80 4148 5387
E-mail:[email protected]
Web:www.kramerindia.com
IN ST A L L E R SOL UT ION S CA T AL O G 2 0 1 4
CATALOG 2014
INSTALLER SOLUTIONS
CATALOG 2014
KRAMER ELECTRONICS AUSTRALIA Pty, Ltd.
Unit 3/1-5, Knobel Court
Shailer Park, 4128, QLD
Brisbane, Australia
Tel: + 61 7 38 06 4290
Fax: + 61 7 38 06 4295
E-mail:[email protected]
Web:www.krameraustralia.com.au
KRAMER ELECTRONICS NEW ZEALAND, Ltd.
Unit 4B, 89B Ellice Road
Wairau Valley, 0629
Auckland, New Zealand
Tel: + 64 9 215 8083
Fax: + 64 9 929 3408
E-mail:[email protected]
Web:www.krameraustralia.com.au
KRAMER ELECTRONICS CHILE SPA
Avenida Vitacura 2909 Of. 811
Las Condes, 7550024 Santiago, Chile
Tel: + 56 2 2953 0660
Fax: + 56 2 2953 0661
E-mail:[email protected]
Web:www.kramer.cl
KRAMER ELECTRONICS ARGENTINA
Tel: + 54 (11) 4554 4621
Cel: + 54 (911) 6398 7576
Arg.: 011 15 6398 7576
Nextel:593*476
E-mail:[email protected]
Web:www.kramerargentina.com
KRAMER ELECTRONICS COLOMBIA
Tel.: + 57 (1) 510 0376
Cel: + 57 (320) 455 1070
E-mail:[email protected]
Web:www.kramercolombia.com
KRAMER ASIA PACIFIC Pte, Ltd.
69 Ubi Crescent,
#03-06/07 CES Building
Singapore 408561
Tel: + 65 6274 4474
Fax: + 65 6274 4414
E-mail:[email protected]
Web:www.kramerasia.com
DISTRIBUTED BY
BUILDING THE FUTURE AV WORLD
WWW.KRAMERELECTRONICS.COM
KRAMER ELECTRONICS
BUILDING THE FUTURE AV WORLD
& s
les tor
b
c
Ca nne
Co
vi
om cti
o
R nne
Co
ty
ty s
ial uct
c
e
d
Sp Pro
AV
TABLE OF CONTENTS
CABLES & CONNECTORS
ACCESSORIES .......................................................................... 99
DIGITAL ACCESSORIES ........................................................ 99
STANDARD CABLES........................................................... 6
ACCESSORIES AND TERMINATIONS......................... 100
BULK CABLES ...........................................................................6
TOOLS, ADAPTERS & CONNECTORS ....................................... 100
VIDEO CABLES .....................................................................6
ADAPTERS & ADAPTER CABLES ....................................... 100
AUDIO/CONTROL CABLES ................................................... 16
TOOLS . . ........................................................................... 102
TWISTED PAIR CABLES ....................................................... 19
MISCELLANEOUS . . ............................................................ 107
CABLE ASSEMBLIES.. ............................................................... 24
VIDEO ASSEMBLIES .............................................................24
ROOM CONNECTIVITY
15-pin HD......................................................................... 24
TABLE CONNECTIONS ............................................................ 110
BNC .. ................................................................................ 33
Modular Solutions . . ..................................................... 110
RCA .................................................................................. 35
ENCLOSURE . . ................................................................... 110
s-Video (4-Pin).. .................................................................. 39
INNER FRAME . . ................................................................ 117
HDMI ................................................................................ 41
POWER SOCKET ............................................................... 120
DVI ................................................................................... 47
POWER CORD .................................................................. 120
DISPLAY PORT ................................................................... 52
CABLE RETRACTORS ........................................................ 121
FIREWIRE® ........................................................................ 54
BRACKETS . . ..................................................................... 122
LC FIBER OPTIC . . ................................................................ 56
FIXED SOLUTIONS . . ............................................................ 123
SC FIBER OPTIC ................................................................ 57
WALL PLATES ....................................................................... 128
AUDIO ASSEMBLIES . . ...........................................................58
FRAMES . . .......................................................................... 129
3.5mm ............................................................................. 58
FIXED SOLUTIONS . . ............................................................ 130
RCA .................................................................................. 60
active .............................................................................. 130
XLR .................................................................................. 61
AV AUDIO & VIDEO ........................................................... 130
CONTROL ASSEMBLIES ........................................................62
VIDEO ONLY . . ................................................................... 131
9-Pin D (RS-232) . . .............................................................. 62
AUDIO ONLY .................................................................... 132
IR EMITTER . . ...................................................................... 62
COMPUTER (15-Pin HD) .................................................... 134
IR RECEIVER ...................................................................... 63
POWER AMPLIFIERS ......................................................... 148
TWISTED PAIR CABLES.......................................................64
PASSIVE . . .......................................................................... 149
RJ-45 (CAT 5)................................................................... 64
COMPUTER (15-Pin HD) .................................................... 149
PLENUM CABLES.............................................................. 65
RCA ................................................................................ 153
BULK CABLES ......................................................................... 65
s-Video 4-Pin ................................................................... 153
VIDEO CABLES ................................................................... 65
HDMI .............................................................................. 154
AUDIO/CONTROL CABLES .................................................. 66
DVI ................................................................................. 156
TWISTED PAIR CABLES ....................................................... 68
XLR ................................................................................ 157
CABLE ASSEMBLIES.. ............................................................... 69
ACCESSORIES . . .................................................................. 158
VIDEO ASSEMBLIES .............................................................69
RACK ADAPTERS ............................................................. 158
15-Pin HD ......................................................................... 69
WALL BOXES ................................................................... 159
RCA .................................................................................. 73
FLOOR BOX FRAMES . . ............................................................ 160
HDMI ................................................................................ 73
MOUNTING FRAMES . . ........................................................ 160
AUDIO ASSEMBLIES . . ...........................................................74
ACCESSORIES . . .................................................................. 165
3.5mm ............................................................................. 74
INSERTS . . .............................................................................. 166
RCA .................................................................................. 75
SINGLE & DOUBLE INSERTS . . ............................................. 166
TWISTED PAIR ASSEMBLIES ................................................75
COMPUTER (15-Pin HD) .................................................... 166
RJ-45 ............................................................................... 75
BNC .. .............................................................................. 169
LOW SMOKE & HALOGEN FREE................................... 76
RCA ................................................................................ 169
BULK CABLES ......................................................................... 76
4-PIN (s-Video) ................................................................. 171
CABLE ASSEMBLIES.. ............................................................... 82
HDMI .............................................................................. 172
VIDEO ASSEMBLIES .............................................................82
DVI ................................................................................. 172
15-Pin HD ......................................................................... 82
DISPLAY PORT ................................................................. 173
DVI ................................................................................... 83
“F” .................................................................................. 173
HDMI ................................................................................ 83
3.5MM ........................................................................... 174
RAPID RUN® CABLES & WALLPLATES........................ 84
XLR ................................................................................ 177
ANALOG (ORANGE CODED) . . ..................................................... 85
SPEAKER/VOLUME CONTROLLER ...................................... 178
ANALOG RUNNER CABLES .. .................................................85
TERMINAL BLOCK ............................................................ 178
RUNNER - NON PLENUM .................................................... 85
9-Pin D-SUB (RS-232) . . ..................................................... 179
RUNNER - PLENUM ............................................................ 86
USB ................................................................................ 181
ANALOG RUNNER TERMINATIONS .......................................87
RJ-45 (CAT 5/ETHERNET) ................................................ 182
FLYING LEADS ................................................................... 87
CABLE PASS-THROUGH . . ................................................... 183
WALL PLATES ................................................................... 89
BLANK COVER PLATE ....................................................... 183
DIGITAL (RED CODED) .............................................................. 90
CONTROL ........................................................................ 184
DIGITAL RUNNER CABLES.. ..................................................90
POWER SUPPLIES (DC) ..................................................... 184
RUNNER - NON PLENUM .................................................... 90
RACK ADAPTERS.. ............................................................. 185
RUNNER - PLENUM ............................................................ 91
DIGITAL RUNNER TERMINATIONS ........................................92
SPEAKERS
FLYING LEADS ................................................................... 92
SPEAKERS......................................................................... 188
WALL PLATES ................................................................... 96
2
TAB L E OF C ON TEN TS
INSTALLER
SOLUTIONS
CATALOG
2014
www.kramerelectronics.com
PRODUCT INDEX
AD-A35M/2RF.............................100
AD-BF/BF....................................100
AD-BF/RM...................................100
AD-BM/2BFT................................100
AD-BM/2BFY...............................100
AD-BM/75...................................100
AD-BM/RF...................................100
ADC-DF/HM.................................101
ADC-DMA/5BF-1..........................101
ADC-DM/DF+GF............................101
ADC-DM/HF.................................101
ADC-DPM/DF...............................101
ADC-DPM/GF...............................101
ADC-DPM/HF...............................101
ADC-MDP/DF...............................101
ADC-MDP/GF...............................101
ADC-MDP/HF...............................101
AD-D9F/D9F................................100
AD-D9M/D9M..............................100
AD-DF/DF/RA..............................101
AD-DF/DF/RA-FLAT......................101
AD-DF/DM/RA.............................101
AD-DF/HM...................................100
AD-DM/GF...................................100
AD-DM/HF...................................100
AD-GF/GF....................................100
AD-GM/GF/RA.............................100
AD-GM/GM..................................100
AD-HF/HF....................................100
AD-HF/HF/RA..............................101
AD-HF/HF/RA-FLAT......................101
AD-HF/HM/RA.............................100
AD-RF/RF....................................100
BC-1T............................................16
BC-1T/LSHF...................................76
BC-1X..............................................7
BC-1X59..........................................8
BC-1X/LSHF(22AWG)-300M.......... 77
BC-2S............................................18
BC-2S/LSHF...................................78
BC-2T............................................17
BC-2X..............................................9
BC-3X............................................10
BC-3X2T7S ...................................15
BC-4X............................................11
BC-5X............................................12
BC-5X5S .......................................13
BC-5X26........................................14
BC‑5X/LSHF...................................79
BC-CAT5E/LSHF.............................80
BC-DGKat7a23...............................21
BC-DGKat524.................................19
BC-DGKat623.................................20
BCP-1T .........................................66
BCP-2T .........................................67
BCP-5X-SOLID.................................65
BCP-DGKat724...............................68
BC-RG63G........................................6
BC-STP..........................................23
BC‑XTP..........................................22
BC-XTP/LSHF.................................81
C-2LC/2LC.....................................56
C-2RAM/2RAM..............................60
C-3RVAM/3RVAM..........................37
C-3RVM/3RVM..............................36
C-4FDM/4FDM...............................50
C-4LC/4LC ....................................56
C-5BM/5BM..................................34
C-5RVAM/5RVAM..........................38
C-A35M/2IRE ................................62
C-A35M/2RAM & C-A35F/2RAM.....59
C-A35M/A35F...............................58
C-A35M/A35M..............................58
C-A35M/D9F.................................62
C-A35M/IRE ..................................62
C-A35M/IRR..................................63
CABLE PULL SLEEVE......................107
C-AC/POWERCORD.......................120
C-AFDM/AFDM...............................49
C-AS35M/AS35F............................59
C-BM/BM......................................33
CC-BNC/RCA/F............................104
CCR-BNC......................................105
CCR-RJ45....................................105
C-D9F/3PM.................................101
C-DGK6/DGK6................................64
C-DMA/5BM..................................51
C‑DM/DM......................................47
C-DM/DM/FLAT(W)........................48
www.kramerelectronics.com
C-DM/DM/xl................................ 47
C-DPM/DPM..................................52
C-DPM/HM....................................53
C-FM4/FM4...................................54
C-FM6/FM4...................................54
C-FM6/FM6...................................55
C-FM9/FM9...................................55
C-FODM/FODM...............................48
C‑FODPM/FODPM...........................52
C-FOHM/FOHM...............................45
C-GM/3RVM & C-GM/3RVF ............31
C-GM/5BM & C-GM/5BF & C-GF/5BM
& C-GF/5BF...................................32
C-GMAC/GMAC..............................30
C-GMA/GMA..................................27
C-GMA/GMA(45)............................28
C-GMA/GMA(90)............................29
C-GMA/GMA(90-UP)........................29
C-GM/GM(45)................................25
C-GM/GM(90)................................26
C-GM/GM(90-UP)............................26
C-GM/GM & C-GM/GF.....................24
C-GM/xl.........................................27
C‑HM/DM......................................46
C‑HM/HM......................................41
C-HM/HM/A-C...............................45
C-HM/HM/A-D...............................46
C-HM/HM/ETH..............................41
C-HM/HM/FLAT/ETH.....................43
C-HM/HM/FLAT-KRTL................... 43
C-HM/HM-KRTL........................... 42
C-HM/HM/PRO..............................42
C-IRR/HDR4F-KIT............................63
CLS-DM/DM...................................83
CLS-GMA/GMA...............................82
CLS-GM/GM...................................82
CLS-HM/HM/ETH...........................83
C-MBM/MBM.................................33
C-MDMA/MGMA.............................50
C-MDP/HM....................................53
C-MGMA/MGMA.............................28
C-MGM/MGM.................................25
C-MH1/MH1..................................30
C-MHMA/MHMA............................44
C-MHM/MHM................................44
C-MHWP500..................................31
C-MRVM/MRVM.............................35
COLOR RINGS...............................106
CON-HD15...................................106
CP‑2RAM/2RAM............................75
CP-3RVAM/3RVAM.........................73
CP-A35M/A35M............................74
CP-DGK6/DGK6..............................75
CP-GM ..........................................71
CP-GMA/GMA/xl............................70
CP-GM/GM/xl ...............................69
CP-GM-XX-5BMKIT...........................71
CP-HM/HM/ETH.......................... 73
CP-MH1/MH1/xl............................72
C-R3VM/R3VM..............................36
C-R4VM/R4VM..............................37
C-RVM/RVM..................................35
C-SC/SC/OM3...............................57
C-SF/2RVM & C-SM/2RVM.............40
C-SM/2BM & C-SM/2BF.................40
C-SMA/SMA...................................39
C-SM/SM.......................................39
CTW-BNC.....................................105
C-UAM/DC35-3............................101
C-XLQM/XLQF................................61
F-010..........................................160
F-021..........................................161
F-110..........................................166
F-121..........................................163
F-571..........................................162
FERRITE CORES.............................107
FLA-1F.........................................165
FLA-2F.........................................165
FLA-10.........................................164
FLA-12.........................................164
FLA-13.........................................164
FRAME-1G ...................................129
FRAME-2G ...................................129
K-ABLE-BOX..................................121
K-POD301....................................123
OWB-1G.......................................159
OWB-2G.......................................159
OWB-3G.......................................159
RapidRun®................................... 84
INSTALLER
SOLUTIONS
RC-10TB......................................184
RC-20TB......................................184
RG‑6 BNC.....................................103
RG‑6 RCA.....................................103
RK-2WP.......................................158
RK-22WP.....................................158
RK-121WP...................................158
RK-WP6.......................................185
RK-WP16.....................................185
RR-AN......................................... 85
RR-CA-DM.................................... 93
RR-CA-DMA.................................. 94
RR-CA-HM.................................... 95
RR-C-DM...................................... 92
RR-C-DMA.................................... 93
RR-C-GM...................................... 87
RR-C-GMA.................................... 87
RR-C-HM...................................... 95
RR-C-MH1.................................... 88
RR-DG......................................... 90
RRP-AN....................................... 86
RRP-DG....................................... 91
RR-PS-HM.................................... 99
RR-WPA-DF.................................. 97
RR-WPA-DFA................................ 97
RR-WPA-HF.................................. 98
RR-WP-DF.................................... 96
RR-WP-DFA.................................. 96
RR-WP-GF.................................... 89
RR-WP-GFA.................................. 89
RR-WP-HF.................................... 98
RR-WP-MH1................................. 89
RTBUS-11....................................124
RTBUS-12....................................125
RTBUS-21....................................126
SKIC............................................200
SPK-C411(PAIR)............................188
SPK-C412(PAIR)............................189
SPK-C611(PAIR)............................190
SPK-C612(PAIR)............................191
SPK-C613(PAIR)............................192
SPK-C800-EDU..............................193
SPK-C800-PRO..............................194
SPK-W511(PAIR)...........................195
SPK-W611(PAIR)...........................196
SPK-W612(PAIR)...........................197
SPK-W613(PAIR)...........................198
SPK-WA511(PAIR).........................199
SWM-1........................................200
T1AF...........................................117
T-2INSERT....................................122
T3F.............................................118
T4F.............................................118
T5F.............................................119
T6F.............................................119
T10F...........................................119
TBUS-1Axl....................................110
TBUS-3xl......................................111
TBUS-4xl......................................112
TBUS-5xl......................................113
TBUS-6xl......................................114
TBUS-10xl....................................115
TBUS-201xl................................ 127
TL-B/CRIMP.................................102
TL-B/REM....................................102
TL-LCT.........................................102
TL-STRIP......................................102
TL-STRIP/C..................................102
TL-WS.........................................102
T-RC.......................................... 122
TS-Power-Socket............................120
T-TBLANK.....................................122
UTBUS-1xl....................................116
VA-122........................................100
VPM-2.........................................134
W-1F...........................................173
W-2BLANK...................................183
W-2F...........................................173
W-5PS.........................................184
W1145.......................................182
W4545.......................................182
WA-1H........................................174
WA-1N........................................178
WA-1PN......................................174
WA-1XLF.....................................177
WA-1XLM....................................177
WA-2N........................................169
WA-3N........................................174
WA-20N......................................132
CATALOG
2014
WA-21N......................................132
WA-22N......................................133
WA-23N......................................133
WA-45.........................................175
WAP-1.........................................148
WAS-1N......................................176
WAS-3.........................................171
WAS-3P.......................................171
WAS-4.........................................171
WAV-1N......................................175
WAV-1R.......................................176
WAV-1RP.....................................175
WAV-2.........................................153
WAV-3.........................................170
WAV-5.........................................150
WAV-5C.......................................151
WAV‑5H.......................................154
WAV-5YC.....................................151
WAV-6H.......................................155
WAV-6UBA...................................152
WAV-6YC.....................................152
WAV-645.....................................152
WAV-DA1.....................................156
WAV-DA2.....................................156
WBB...........................................169
W-BLANK.....................................183
W-COM1......................................180
WCP...........................................183
WCP-2.........................................183
WCP-21.......................................183
WD-2F.........................................179
WD-2M........................................179
WD-FM........................................179
WD-FM........................................180
W-DP..........................................173
W-DVI..........................................172
W-DVIA........................................172
W-H............................................172
WHC-3........................................170
W-LM..........................................178
WP-3TB ......................................129
WP-27/WP-28.............................130
WP-101.......................................137
WP-110.......................................138
WP-120.......................................139
WP-121.......................................140
WP-209.......................................141
WP-210.......................................142
WP-210A.....................................143
WP-211DS...................................144
WP-220.......................................145
WP-230.......................................146
WP-301xl.....................................147
WP‑H1M......................................154
WP‑H2M......................................154
WPN-11......................................135
WPN-12......................................136
WPX-3.........................................149
WR45.........................................170
WRR...........................................169
W-S1...........................................171
WSP-1.........................................178
WU-AA........................................181
WU-AB........................................181
WU-BA........................................181
WU-BB........................................182
WV-11N......................................131
WV-12N......................................131
WV-20N......................................131
WVS-1.........................................153
WVS-2.........................................153
WX-1N........................................168
WX-2F.........................................167
WX-2M........................................167
WX-3...........................................166
WXA-1.........................................150
WXA-2.........................................168
WXA-2P.......................................168
WXA-3.........................................150
WXA-H........................................155
WX-F5B.......................................168
WX-FM........................................167
WXL-1FM.....................................157
WXL-2F.......................................157
WXL-2M......................................157
WX-MF........................................167
WXV-1.........................................149
PRODUCT
New products colored in red
INDEX
3
Kramer has a full line of connectivity solutions to integrate your AV system.
Our “Installer Solutions” line includes:
Bulk Cable - Cable only on spools, with no termination. Available in a wide range of formats and lengths and in standard, Low
Smoke Halogen Free and plenum rated versions.
Plenum rated cable is most often used in North America. HVAC systems in commercial buildings frequently use the open plenum
airspace above suspended ceilings as an air return. Cables with ratings such as CL2P, CL3P, and CMP typically satisfy building
fire and safety codes by meeting more stringent standards for flammability and smoke emission.
Cable Assemblies - 15-pin HD, BNC, RCA, s-Video, HDMI, DVI, DisplayPort, FireWire®, XLR etc, made of copper/fiber optic
cables; in various lengths with connectors on each end to fit virtually every connectivity application. Also available in standard, Low
Smoke Halogen Free and plenum rated versions.
All Kramer cables are continually updated to incorporate the latest technological advances in manufacturing. They are the ideal
companion to Kramer and Sierra Video hardware, and solve almost any connectivity requirement found in today’s professional AV
environments.
Termination Accessories - The perfect way to finish your cabling installation. In addition to typical adapters, gender changers, etc,
choose from a high-performance radial compression system, or an industry-standard crimp system for installing BNC, RCA or
F type connectors.
Wall Plates - Kramer offers a wide range of passive and active wall plates, from simple pass-through connectors on small modules
up to 2 gang multi-signal line drivers/transmitters and receivers.
Table Mounted Cable Management Solutions - Conference tables are a central element of many AV presentation systems.
The challenge facing system designers is to provide tabletop inputs for computer video, audio, network, and power in the most
unobtrusive fashion possible. Kramer’s attractive table connection products are designed to provide maximum connectivity with
easy, neat and flexible installation.
Floor Box – Kramer offers mounting frames for the installation of line drivers/transmitters and passive/ active connectivity inserts
in different floor-boxes.
Speakers - Kramer offers speakers designed to fit the needs of professional AV systems. Several models provide outstanding
audio performance and an ideal range of physical and electrical configurations. Choices include round or rectangular format, inwall, ceiling or surface mount, open or enclosed back, and a choice of 4/8Ω, or 70/100 volt operation.
Kramer’s cost-effective fiber optic solutions conveniently and reliably deliver today’s high-quality signals over long distances.
Since new products are frequently added to our product line, we can often respond to special product requests. Contact us with
any connection-related needs and we will try to solve them on a case-by-case basis.
4
INTORDUCTION
INSTALLER
SOLUTIONS
CATALOG
2014
www.kramerelectronics.com
CABLES & CONNECTORS
STANDARD CABLES
BULK CABLES
CABLES & CONNECTORS
VIDEO CABLES
BC-RG63G
1 Coax RG−6 Broadcast Quality Optimized for 3G HD−SDI Bulk Cable Kramer's BC-RG63G is a high-performance broadcast-grade RG-6
cable for 3G HD-SDI applications. It has been optimized for the Sierra
Aspen 3G HD-SDI routers that have a system range of 500ft.
conductor
heat-sealed
aluminum
polyester
FEATURES
braid shield
●●
Quality Construction - 18AWG solid center conductor and dual shield design
consisting of aluminum braid and dual aluminum Mylar foil. Rugged and flexible
with low attenuation. Tested to 3G.
●●
Universal Compatibility - Compatible with Kramer’s compression connectors as well
as typical crimp systems.
●●
Length - Available in reels of 152/305m (500/1000ft).
jacket
Specifications:
CONSTRUCTION
Coax Center Conductor:
Insulation:
Shield:
Braided Shield:
Outside Jacket:
Center Conductor:
18AWG solid bare copper.
Film PE.
Heat−sealed aluminum/polyester.
Tinned copper.
PVC.
1.02mm (0.0403in).
ELECTRICAL
Impedance:
Capacitance:
Attenuation (dB/100FT):
75Ω +/−3db.
16.2pF/ft +/−2pF/ft.
0.28dB @1MHz
0.77dB @10MHz
1.53dB @50MHz
1.98dB @100MHz
2.73dB @200MHz
3.90dB @400MHz
5.24dB @700MHz
6.35dB @1000MHz
7.75dB @1450MHz
9.74dB @2200MHz
OVERALL
Temperature:
11.64dB @3000MHz.
−20° to 75°C (−4° to 167°F).
REGULATORY
Flame Test:
UL:
CSA:
ROHS:
FT4.
E132276−A.
C(UL).
In compliance with European directive 2002/95/IEC.
CONFIGURATIONS:
6
CABLES & CONNECTORS
Model
Description
BC-RG63G-152M
1 Coax: Broadcast Quality RG-6 Bulk Cable
500ft
152.4m
BC-RG63G-305M
1 Coax: Broadcast Quality RG-6 Bulk Cable
1000ft
304.8m
INSTALLER SOLUTIONS CATALOG 2014
LENGTH
www.kramerelectronics.com
BC-1X
1 Coax RG−6 Super High−Resolution Bulk Cable rip cord
center conductor
dual aluminum
Mylar foil
FEATURES
●●
Quality Construction - 18AWG solid center conductor and dual shield design
consisting of aluminum braid and dual aluminum Mylar foil. Rugged and flexible
with low attenuation. Tested to 3G.
●●
Universal Compatibility - Compatible with Kramer’s compression connectors as well
as typical crimp systems.
●●
Length - Available in reels of 100/300m (328/984ft).
braid
jacket
Specifications:
CONSTRUCTION
Coax Center Conductor:
Dielectric:
Shield:
18AWG solid bare copper.
Skin foam.
(A) 61% braid 34AWG aluminum wire.
(B) Dual aluminum Mylar foil 25% overlap rate.
Outside Jacket:
Outside Jacket Color:
PVC.
Dark gray with white lettering.
DIAMETERS
Center Conductor:
Dielectric:
Outside Diameter:
1.02mm (0.0403in).
4.57mm (0.179in).
6.95mm (0.391in).
ELECTRICAL
Impedance:
DC Resistance:
Capacitance:
Velocity of Propagation:
Temperature:
Attenuation (dB/100ft):
75Ω.
21.8Ω/km (6.6Ω/1000ft).
53.1pF/m (16.1pF/ft).
82%
−20° to 75°C (−4° to 167°F).
−0.3dB @1MHz
−0.6dB @5MHz
−0.8dB @10MHz
−1.6dB @50MHz
−2.0dB @100MHz
−2.8dB @180MHz
−4.4dB @400MHz
−5.7dB @750MHz
−6.7dB @1000MHz
REGULATORY
UL:
CSA:
RoHS:
CL2.
C(UL) FT4.
In compliance with European directive 2002/95/IEC.
CONFIGURATIONS:
www.kramerelectronics.com
Model
Description
BC-1X-100M
1 Coax: RG-6 Bulk Cable
328ft
100m
BC-1X-300M
1 Coax: RG-6 Bulk Cable
984ft
300m
INSTALLER SOLUTIONS CATALOG 2014
LENGTH
CABLES & CONNECTORS
7
CABLES & CONNECTORS
insulation
Kramer’s BC-1X is a super high-resolution RG-6 style coaxial cable perfect for
long distance composite and 3G HD-SDI runs that require precision performance
with analog or digital video signals.
BC-1X59
1 Coax RG−59 High−Resolution Bulk Cable
Kramer’s BC-1X59 is a high-resolution RG-59 coaxial cable perfect for long
distance runs that require precision performance with analog or digital video
signals.
jacket
CABLES & CONNECTORS
center conductor
insulation
FEATURES
dual aluminum
Mylar foil
●●
Quality Construction - 20AWG solid center conductor and dual shield design
consisting of copper braid and dual aluminum Mylar foil. Rugged and flexible with
low attenuation. Tested to 3GHz.
●●
Universal Compatibility - Compatible with Kramer’s compression connectors as well
as typical crimp systems.
●●
Length - Available in reels of 100/300m (328/985ft).
braid
Specifications:
CONSTRUCTION
Coax Center Conductor:
Dielectric:
Shield:
20AWG solid bare copper.
Skin foam.
(A) 95% braid 36AWG tinned copper wire.
(B) Dual aluminum Mylar foil 25% overlap rate.
Outside Jacket:
Outside Jacket Color:
PVC.
Dark gray with white lettering.
DIAMETERS
Center Conductor:
Dielectric:
Outside Diameter:
0.813mm (0.032in).
3.70mm (0.145in).
6.00mm (0.236in).
ELECTRICAL
Impedance:
DC Resistance:
Capacitance:
Velocity of Propagation:
Temperature:
Attenuation (dB/100ft):
75Ω.
34.6Ω/km (10.5Ω/1000ft).
57pF/m (17.3pF/ft).
83%.
−20° to 75°C (−4° to 167°F).
−0.3dB @1MHz
−0.6dB @5MHz
−0.9dB @10MHz
−1.3dB @50MHz
−2.3dB @100MHz
−3.0dB @180MHz
−4.7dB @400MHz
−6.5dB @750MHz
−7.8dB @1000MHz.
REGULATORY
UL:
CSA:
RoHS:
CMG.
FT4.
In compliance with European directive 2002/95/IEC.
CONFIGURATIONS:
8
CABLES & CONNECTORS
Model
Description
BC-1X59-100M
1 Coax: RG-59 Bulk Cable
328ft
100m
BC-1X59-300M
1 Coax: RG-59 Bulk Cable
985ft
300m
INSTALLER SOLUTIONS CATALOG 2014
LENGTH
www.kramerelectronics.com
BC-2X
2 Mini Coax High−Resolution s−Video Bulk Cable ripcord
Kramer’s BC-2X is a high-resolution dual mini coaxial cable perfect for routing
s-Video (Y/C) signals in commercial or residential AV systems.
jacket
insulator
FEATURES
spiral shield
●●
Quality Construction - Each coax has a 26AWG center conductor and dual shield
design consisting of copper spiral and Mylar/foil. Rugged and flexible with low
attenuation.
●●
Universal Compatibility - Compatible with Kramer’s compression connectors as well
as typical crimp system and 4-pin s-Video connectors.
●●
Length - Available in reels of 100/300m (328/985ft).
drain wire
aluminum
Mylar foil
Specifications:
CONSTRUCTION
Coax Center Conductor:
Dielectric:
Shield:
26AWG 7/34 tinned copper.
Foam polyethylene.
(A) 90% spiral 38AWG tinned copper.
(B) Aluminum Mylar foil 25% overlap rate.
Drain Wire:
Coax Jacket Colors:
Outside Jacket:
Outside Jacket Color:
24AWG 7/32 tinned copper.
Yellow & white.
PVC.
Dark gray with white lettering.
DIAMETERS
Center Conductor:
Dielectric:
Individual Coax:
Outside Diameter:
0.474mm (0.018in).
1.95mm (0.176in).
2.6mm (0.102in).
6.2mm (0.244in).
ELECTRICAL
Impedance:
DC Resistance:
Capacitance:
Velocity of Propagation:
Temperature:
Attenuation (dB/100ft):
75Ω.
148Ω/km (45Ω/1000ft).
53.1pF/m (17.3pF/ft).
76%.
−20° to 75°C (−4° to 167°F).
−0.5dB @1MHz
−1.2dB @5MHz
−1.8dB @10MHz
−4.4dB @50MHz
−6.7dB @100MHz.
REGULATORY
UL:
CSA:
RoHS:
CL2.
C(UL) FT4.
In compliance with European directive 2002/95/IEC.
CONFIGURATIONS:
www.kramerelectronics.com
Model
Description
BC-2X-100M
2 Coax: 26 AWG Mini Coax Bulk Cable
328ft
100m
BC-2X-300M
2 Coax: 26 AWG Mini Coax Bulk Cable
985ft
300m
INSTALLER SOLUTIONS CATALOG 2014
LENGTH
CABLES & CONNECTORS
9
CABLES & CONNECTORS
center
conductor
BC-3X
3 Mini Coax High−Resolution Bulk Cable
jacket
Kramer’s BC-3X is a high-resolution, 75Ω 3 mini-coaxial cable perfect for routing
component or composite video and stereo audio signals in commercial or
residential AV systems. It is fully compatible with all analog and digital component
video formats including YUV, Y R-Y B-Y, YPbPr, and YCrCb.
insulation
CABLES & CONNECTORS
braid
center conductor
FEATURES
tissue paper
1
2
3
●●
Quality Construction - Each coax has a 28AWG center conductor and dual shield
design consisting of copper braid and aluminum Mylar foil. Coax jackets are colorcoded red, green, blue. Rugged and flexible with low attenuation.
●●
Universal Compatibility - Compatible with Kramer’s compression connectors as well
as typical crimp systems.
●●
Length - Available in reels of 100m (328ft).
Specifications:
CONSTRUCTION
Coax Center Conductor:
Dielectric:
Shield:
Coax Jacket Colors:
Outer Jacket:
Outer Jacket Color:
28AWG 7/36 tinned copper.
Foam polyethylene.
90% braid 38AWG tinned copper.
Red, green, blue.
PVC.
Dark gray with white lettering.
DIAMETERS
Center Conductor:
Dielectric:
Individual Coax:
Outside Diameter:
0.38mm (0.015in).
1.6mm (0.063in).
2.75mm (0.108in).
7.5mm (0.295in).
ELECTRICAL
Impedance:
DC Resistance:
Capacitance:
Velocity of Propagation:
Temperature:
Attenuation (dB/100ft):
75Ω.
237Ω/km (72.2Ω/1000ft).
60pF/m (18.3pF/ft).
78%.
−20° to 75°C (−4 to 167°F).
−0.6dB @1MHz−1.4dB @5MHz
−2.1dB @10MHz
−4.7dB @50MHz
−6.8dB @100MHz
−9.2dB @180MHz
−14.2dB @400MHz
−20.1dB @750MHz
−23.8dB @1000MHz.
REGULATORY
UL:
CSA:
RoHS:
CL2.
FT4.
In compliance with European directive 2002/95/IEC.
CONFIGURATIONS:
10
CABLES & CONNECTORS
Model
Description
BC-3X-100M
3 Coax: 28 AWG Mini Coax Bulk Cable
INSTALLER SOLUTIONS CATALOG 2014
LENGTH
328ft
100m
www.kramerelectronics.com
BC-4X
4 Mini Coax High−Resolution Bulk Cable
jacket
center
conductor
insulation
fEATURES
2
1
3
4
●●
Quality Construction - Each coax has a 28AWG center conductor and copper braid
shield. Coax jackets are color-coded red, green, blue, black. Rugged and flexible
with low attenuation.
●●
Universal Compatibility - Compatible with Kramer’s compression connectors as well
as typical crimp systems.
●●
Length - Available in reels of 100m (328ft).
Specifications:
CONSTRUCTION
Coax Center Conductor:
Dielectric:
Shield:
Coax Jacket Colors:
Outer Jacket:
Outer Jacket Color:
28AWG 7/36 tinned copper.
Foam polyethylene.
90% braid 38AWG tinned copper.
Red, green, blue, black.
PVC.
Dark gray with white lettering.
DIAMETERS
Center Conductor:
Dielectric:
Individual Coax:
Outside Diameter:
0.38mm (0.015in).
1.6mm (0.063in).
2.75mm (0.108in).
8.5mm (0.334in).
ELECTRICAL
Impedance:
DC Resistance:
Capacitance:
Velocity of Propagation:
Temperature:
Attenuation (dB/100ft):
75Ω.
237Ω/km (72.2Ω/1000ft).
60pF/m (18.3pF/ft).
78%.
−20° to 75°C (−4° to 167°F).
−0.6dB @1MHz
−1.4dB @5MHz
−2.1dB @10MHz
−4.7dB @50MHz
−6.8dB @100MHz
−9.2dB @180MHz
−14.2dB @400MHz
−20.1dB @750MHz
−23.8dB @1000MHz.
REGULATORY
UL:
CSA:
RoHS:
CL2.
C(UL) FT4.
In compliance with European directive 2002/95/IEC.
CONFIGURATIONS:
www.kramerelectronics.com
Model
Description
BC-4X-100M
4 Coax: 28 AWG Mini Coax Bulk Cable
INSTALLER SOLUTIONS CATALOG 2014
LENGTH
CABLES & CONNECTORS
328ft
100m
11
CABLES & CONNECTORS
braid
tissue
paper
Kramer’s BC-4X is a high-resolution, 75Ω 4 mini-coaxial cable perfect for routing
component video and digital audio signals in commercial or residential AV
systems. It is fully compatible with all analog and digital component video formats
including YUV, Y R-Y B-Y, YPbPr and YCbCr as well as all digital audio standards
that use a single 75Ω coax including S/PDIF.
BC-5X
5 Mini Coax High−Resolution Bulk Cable center
conductor
Kramer’s BC-5X is a high-resolution, 75Ω 5 mini-coaxial cable perfect for routing
RGBHV signals in commercial or residential AV systems.
CABLES & CONNECTORS
insulator
FEATURES
filler
●●
Quality Construction - Each coax has a 28AWG center conductor and copper braid
shield. Coax jackets are color-coded red, green, blue, yellow, black. Rugged and
flexible jacket with internal rip cord and sequential markings every meter.
●●
Universal Compatibility - Compatible with Kramer’s compression connectors as well
as typical crimp systems.
●●
Length - Available in reels of 100/300m (328/985ft).
shield
ripcord
jacket
Specifications:
CONSTRUCTION
Coax Center Conductor:
Dielectric:
Shield:
Coax Jacket Colors:
Outer Jacket:
Outer Jacket Color:
28AWG 7/36 tinned copper.
Foam polyethylene.
90% braid 38AWG tinned copper.
Red, green, blue, yellow, black.
PVC.
Dark gray with white lettering.
DIAMETERS
Center Conductor:
Dielectric:
Individual Coax:
Outside Diameter:
0.38mm (0.015in).
1.6mm (0.063in).
2.75mm (0.108in).
9.2mm (0.362in).
ELECTRICAL
Impedance:
DC Resistance:
Capacitance:
Velocity of Propagation:
Temperature:
Attenuation (dB/100ft):
75Ω.
237Ω/km (72.2Ω/1000ft).
60pF/m (18.3pF/ft).
78%.
−20° to 75°C (−4° to 167°F).
−0.6dB @1MHz
−1.4dB @5MHz
−2.1dB @10MHz
−4.7dB @50MHz
−6.8dB @100MHz
−9.2dB @180MHz
−14.2dB @400MHz
−20.1dB @750MHz
−23.8dB @1000MHz.
REGULATORY
UL:
CSA:
CL2.
C(UL) CL2.
CONFIGURATIONS:
12
CABLES & CONNECTORS
Model
Description
BC-5X-100M
5 Conductor Hi-Res Mini-Coax (28 AWG) Bulk Cable
328ft
100m
BC-5X-300M
5 Conductor Hi-Res Mini-Coax (28 AWG) Bulk Cable
985ft
300m
INSTALLER SOLUTIONS CATALOG 2014
LENGTH
www.kramerelectronics.com
BC-5X5S
5 Mini Coax High−Resolution & 5 Single−Strand Bulk Cable
center
conductor
insulator
filler
aluminum
Mylar foil
FEATURES
●●
Quality Construction - Each coax has a 28AWG solid center conductor and dual
shield design consisting of copper braid and aluminum Mylar foil. A dual layer
outer shield surrounds the other components and consists of a copper braid and
aluminum Mylar foil. Coax jackets are color-coded red, green, blue, yellow, black.
Rugged and flexible jacket with internal rip cord and sequential markings every
meter.
●●
Extra Single Strands - Extra strands allow passing of extra pins for ID bit support in
15-pin HD cables.
●●
Universal Compatibility - Compatible with Kramer’s compression connectors as well
as typical crimp systems.
●●
Length - Available in reels of 100/300m (328/985ft).
drain wire
ripcord
shield
jacket
Specifications:
COAX
Center Conductor:
Dielectric:
Inner Jacket:
Jacket Colors:
28AWG 7/36 tinned copper.
Foam polyethylene.
PVC.
Red, green, blue, yellow, black.
DIAMETERS
Center Conductor:
Dielectric:
Individual Coax:
0.38mm (0.015in).
1.6mm (0.063in).
2.75mm (0.108in).
ELECTRICAL
Impedance:
DC Resistance:
Capacitance:
Velocity of Propagation:
Temperature:
Attenuation (dB/100ft):
SINGLE STRAND
Conductor:
Jacket:
Diameter:
Jacket Colors:
OVERALL
75Ω.
237Ω/km (72.2Ω/1000ft).
60pF/m (18.3pF/ft).
78%.
−20° to 75°C (−4° to 167°F).
−0.6dB @1MHz
−1.4dB @5MHz
−2.1dB @10MHz
−4.7dB @50MHz
−6.8dB @100MHz
−9.2dB @180MHz
−14.2dB @400MHz
−20.1dB @750MHz
−23.8dB @1000MHz.
28AWG 7/36 tinned copper.
HD polyethylene.
0.82mm (0.032in).
Red, orange, brown yellow & black.
Shield:
(A) 85% braid 36AWG tinned copper.
Outer Jacket:
Outer Jacket Color:
Outer Diameter:
(B) Aluminum Mylar foil 25% overlap rate.
PVC.
Dark gray with white lettering.
10.0mm (0.393in).
REGULATORY
UL:
CSA:
CL2.
C(UL) CL2.
CONFIGURATIONS:
www.kramerelectronics.com
Model
Description
BC-5X5S-100M
5 Conductor Mini-Coax (28 AWG) + 5
Single Strand Bulk Cable
328ft
100m
BC-5X5S-300M
5 Conductor Mini-Coax (28 AWG) + 5
Single Strand Bulk Cable
985ft
300m
INSTALLER SOLUTIONS CATALOG 2014
CABLES & CONNECTORS
LENGTH
13
CABLES & CONNECTORS
inner shield
Kramer’s BC-5X5S is a high-resolution, 28AWG 75Ω 5 mini-coaxial cable with 5
additional 28AWG single strands and an outer shield. Its unique design is ideal
for building into 5 BNC or 15-pin HD (VGA/UXGA) cables and routing computer
graphic video signals in professional AV systems.
BC-5X26
5 Mini Coax High−Resolution Enhanced Bulk Cable jacket
Kramer’s BC-5X26 is a high-resolution, 26AWG 75Ω 5 mini-coaxial cable
designed for routing high-resolution RGBHV signals in professional AV systems.
braid
CABLES & CONNECTORS
center
conductor
FEATURES
filler
●●
Quality Construction - Each coax has a 26AWG center conductor and dual shield
design consisting of copper spiral and aluminum Mylar foil. Coax jackets are colorcoded red, green, blue, yellow, black. Rugged and flexible jacket with sequential
markings every meter.
●●
High Resolution - Supports higher resolution and longer distances than 28AWG
versions.
●●
Universal Compatibility - Compatible with Kramer’s compression connectors as well
as typical crimp systems.
●●
Length - Available in reels of 100/300/500m (328/985/1640ft).
inner jacket
insulation
Specifications:
CONSTRUCTION
Coax Center Conductor:
Dielectric:
Shield:
26AWG 7/34 tinned copper.
Foam polyethylene.
(A) 90% spiral 38AWG tinned copper.
(B) Aluminum Mylar foil 25% overlap rate.
Coax Jacket Colors:
Outer Jacket:
Outer Jacket Color:
Red, green, blue, yellow, black.
PVC.
Dark gray with white lettering.
DIAMETERS
Center Conductor:
Dielectric:
Individual Coax:
Outside Diameter:
0.48mm (0.019in).
1.93mm (0.08in).
2.67mm (0.11in).
9.1mm (0.358in).
ELECTRICAL
Impedance:
DC Resistance:
Capacitance:
Velocity of Propagation:
Temperature:
Attenuation (dB/100ft):
75Ω.
105.0Ω/km (32Ω/100ft).
52.0pF/m (15.7pf/ft).
83%.
−40° to 80°C (−40° to 167°F).
−0.5dB @1MHz
−1.2dB @5MHz
−3.8dB @50MHz
−5.4dB @100MHz
−7.3dB @180MHz
−11.5dB @400MHz
−16.4dB @750MHz
−19.5dB @1000MHz
−43.6dB @3000MHz.
REGULATORY
UL:
CSA:
RoHS:
CL2.
FT4.
In compliance with European directive 2002/95/IEC.
CONFIGURATIONS:
14
CABLES & CONNECTORS
Model
Description
BC-5X26-100M
5 Conductor Enhanced Resolution Hi-Res
Mini-Coax (26 AWG) Bulk Cable
328ft
100m
BC-5X26-300M
5 Conductor Enhanced Resolution Hi-Res
Mini-Coax (26 AWG) Bulk Cable
985ft
300m
BC-5X26-500M
5 Conductor Enhanced Resolution Hi-Res
Mini-Coax (26 AWG) Bulk Cable
1640ft
500m
INSTALLER SOLUTIONS CATALOG 2014
LENGTH
www.kramerelectronics.com
BC-3X2T7S
14 Conductor Presentation/VGA Bulk Cable center
conductor
insulator
double inner
shield
FEATURES
●●
ripcord
outside shield
braid
Quality Construction - Each coax has a 26AWG center conductor and dual shield design
consisting of copper braid and aluminum Mylar foil. Rugged and flexible jacket with internal
rip cord and sequential markings every meter. Coax dielectrics are color-coded red,
green, blue.
●●
High Resolution - Supports higher resolution and longer distances than 28AWG versions.
jacket
●●
Length - Available in reels of 100m (328ft).
aluminum
Mylar foil
Specifications:
COAX
Conductor:
Dielectric:
26AWG 7/34 tinned copper.
Foam polyethylene with red, green, blue color
coding.
(A) 90% spiral 38AWG tinned copper.
(B) Aluminum Mylar foil 25% overlap rate.
PVC.
Black.
Shield:
Inner Jacket:
Jacket Colors:
DIAMETERS
Center Conductor:
Dielectric:
Individual Coax:
0.48mm (0.019in).
1.95mm (0.076in).
2.6mm (0.102in).
ELECTRICAL
Impedance:
DC Resistance:
Capacitance:
Temperature:
Attenuation (dB/30m (100ft)):
SHIELDED PAIR
75Ω.
148Ω/km (45Ω/1000ft).
57pF/m (17.3pF/ft).
−4° to 167°F (−20° to 75°C).
−0.5dB @1MHz
−1.3dB @5MHz
−1.9dB @10MHz
−4.0dB @50MHz
−5.7dB @100MHz
−8.0dB @180MHz
−14.0dB @400MHz.
Conductors:
Jacket:
Diameter:
Shield:
26AWG 7/34 tinned copper.
HD−polyethylene.
0.34in (0.88mm).
(A) 85% spiral 36AWG tinned copper.
Jacket Colors:
(B) Aluminum Mylar foil 25% overlap rate.
White, white/black, red, red/black.
SINGLE STRAND
Conductor:
Jacket:
Diameter:
Jacket Colors:
26AWG 7/34 tinned copper.
HD polyethylene.
0.88mm (0.34in).
Red, orange, brown, yellow, black, red/black.
OVERALL
Shield:
(A) 85% spiral 36AWG tinned copper.
Outer Jacket:
Outer Jacket Color:
Outer Diameter:
(B) Aluminum Mylar foil 25% overlap rate.
PVC.
Dark gray with white lettering.
10.0mm (0.393in).
REGULATORY
UL:
CSA:
RoHS:
CL2.
C(UL) FT4.
In compliance with European directive
2002/95/IEC.
CONFIGURATIONS:
www.kramerelectronics.com
Model
Description
BC-3X2T7S-100M
14 Conductor VGA (26 AWG) Bulk
Presentation Cable
INSTALLER SOLUTIONS CATALOG 2014
LENGTH
CABLES & CONNECTORS
328ft
100m
15
CABLES & CONNECTORS
filler
Kramer’s BC-3X2T7S is a high-resolution multi-conductor containing 3 mini
coaxes, 2 shielded pairs, and 7 single strands. It is the most common type of
cable used for construction of 15-pin HD (VGA/UXGA) cables.
AUDIO/CONTROL CABLES
BC-1T
Mono Audio/Control Bulk Cable
Kramer’s BC-1T is a high-quality shielded pair cable designed for routing balanced
mono or unbalanced stereo mic or line level audio signals in commercial or
residential AV systems.
CABLES & CONNECTORS
jacket
center
conductor
drain wire
FEATURES
aluminum
Mylar foil
●●
Quality Construction - Conductors and drain wire are stranded 20AWG tinned copper.
●●
Rugged and Flexible Jacket - With sequential markings every meter.
●●
Easy Stripping - Exceptionally easy to strip because the foil shield is bonded to the inside
of the jacket.
●●
Length - Available in reels of 300m (985ft).
Specifications:
CONSTRUCTION
Conductors:
20AWG, (10/30) tinned copper
conductors.
PVC color coded: red, black.
Insulation:
Drain Wire:
Shield:
Outer Jacket Color:
20AWG (10/30) tinned copper (in
contact with shield).
Aluminum Mylar foil 25% overlap rate.
Dark gray with blue lettering.
DIAMETERS
Conductor:
PVC Insulation:
0.916mm (0.036in).
0.44mm (0.071in) nominal thickness,
1.8mm diameter.
5.4mm (0.213in).
Outer Jacket:
ELECTRICAL
40 to 100Ω.
Impedance:
34.6Ω/km (10.5Ω/1000ft).
DC Resistance:
Mutual Capacitance Conductor-Conductor: 89pF/m (27pF/ft).
Mutual Capacitance Connected to Shield: 161pF/m (49pF/ft).
−20° to 75°C (−4° to 167°F).
Temperature:
REGULATORY
UL:
CSA:
RoHS:
CL−2.
C(UL) FT4.
In compliance with European directive
2002/95/IEC.
CONFIGURATIONS:
16
CABLES & CONNECTORS
Model
Description
BC-1T-300M
1 Shielded Pair: 20 AWG Audio or Control Bulk Cable
INSTALLER SOLUTIONS CATALOG 2014
LENGTH
985ft
300m
www.kramerelectronics.com
BC-2T
Stereo Audio/Control Bulk Cable
jacket
center
conductor
aluminum
Mylar foil
FEATURES
●●
Quality Construction - Rugged and flexible jacket with sequential markings every
meter.
●●
Easy Stripping - Exceptionally easy to strip because the foil shield is bonded to the
inside of the jacket.
●●
Length - Available in reels of 300m (985ft).
Specifications:
CONSTRUCTION
Conductors:
Insulation:
Drain Wire:
20AWG, (10/30) tinned copper conductors.
Shield:
Outer Jacket Color:
Aluminum Mylar foil 25% overlap rate.
PVC color coded: red/black & green/white.
20AWG (10/30) tinned copper (in contact with shield).
Dark gray with white lettering.
DIAMETERS
Center Conductor:
PVC Insulation:
Outer Jacket:
0.916mm (0.036in).
0.44mm (0.017in) nominal thickness, 1.8mm
diameter.
5.6mm (0.221in).
ELECTRICAL
Impedance:
DC Resistance:
Mutual Capacitance
Conductor-Conductor:
Mutual Capacitance
Connected to Shield:
Temperature:
40 to 100Ω.
34.6Ω/km (10.5Ω/1000ft).
89pF/m (27pF/ft).
161pF/m (49pF/ft).
−20° to 75°C (−4° to 167°F).
REGULATORY
UL:
CSA:
RoHS:
CM.
CM, FT4.
In compliance with European directive 2002/95/IEC.
0CONFIGURATIONS:
www.kramerelectronics.com
Model
Description
BC-2T-300M
2 Shielded Pair: 20 AWG Audio or Control Bulk Cable
INSTALLER SOLUTIONS CATALOG 2014
LENGTH
CABLES & CONNECTORS
985ft
17
300m
CABLES & CONNECTORS
drain wire
Kramer’s BC-2T is a high-quality, dual shielded pair cable designed for routing
balanced stereo mic or line level audio signals in commercial or residential AV
systems.
BC-2S
Speaker Bulk Cable
Kramer’s BC-2S is a high-quality twisted pair cable designed for connecting
speakers and amplifiers in commercial or residential AV systems.
jacket
CABLES & CONNECTORS
center
conductor
FEATURES
insulator
●●
Quality Construction - Rugged and flexible jacket with sequential markings every
meter.
●●
Easy Stripping - Exceptionally easy to strip because the foil shield is bonded to the
inside of the jacket.
●●
Length - Available in reels of 300m (985ft).
Specifications:
CONSTRUCTION
Conductors:
Insulation:
Outer Jacket Color:
16AWG, (26/30) bare copper conductors.
PVC color coded: red, black.
Light gray with blue lettering.
DIAMETERS
Center Conductor:
PVC Insulation:
Outer Jacket:
1.478mm (0.058in).
2.0mm (0.079in).
5.2mm (0.205in).
ELECTRICAL
DC Resistance:
Temperature:
13.7Ω/km (4.17Ω/1000ft).
−20° to 75°C (−4° to 167°F).
REGULATORY
UL:
CSA:
RoHS:
CM.
CM, FT4.
In compliance with European directive 2002/95/IEC.
CONFIGURATIONS:
18
CABLES & CONNECTORS
Model
Description
BC-2S-300M
1 Pair: 16 AWG Speaker Bulk Cable
INSTALLER SOLUTIONS CATALOG 2014
LENGTH
985ft
300m
www.kramerelectronics.com
TWISTED PAIR CABLES
BC-DGKat524
Four−Pair F/UTP Data Bulk Cable (24AWG)
drain wire
aluminium
polyester
shield
Kramer's BC-DGKat524 is 4-pair F/UTP (foil around unshielded twisted pair)
cable designed as the ideal companion to Kramer's twisted pair digital transmitterreceiver sets to provide optimum range and performance.
FEATURES
●●
Quality Construction - 4 non-shielded (F/UTP) twisted pairs of 24AWG solid copper
conductors are cabled together and shielded with a polyester-aluminum tape and
outer jacket.
●●
Optimized for Kramer Hardware - Use with any of Kramer’s wide range of twisted
pair digital transmitter-receiver sets. Terminate with shielded RJ-45 connectors.
●●
Length - Available in pull boxes of 100/305m (328/1000ft).
Specifications:
CONSTRUCTION
Center Conductor:
Outer Jacket Color:
Total Wires:
Drain Wire:
Outer Shield Material:
Conductor Color Code:
24AWG, solid bare copper.
White.
8.
Solid 24AWG tinned copper.
Polyester aluminum tape.
White/blue, white/orange, white/green, white/brown.
DIAMETERS
Conductor Size:
0.5mm (0.02in).
ELECTRICAL
Impedance:
DC Resistance:
Max. Resistance
Unbalanced:
Capacitance:
Propagation Delay Skew:
Temperature:
100Ω.
94Ω/km (31Ω/1000ft) nominal.
2%.
1.2pF/m max.
35ns/100m (1.14ns/100ft) max.
−20° to 60°C (−4° to 140°F).
CONFIGURATIONS:
www.kramerelectronics.com
Model
Description
BC-DGKat524-100M
24 AWG STP Bulk Cable Optimized for
Kramer DVI & HDMI Products
328ft
100m
BC-DGKat524-305M
24 AWG STP Bulk Cable Optimized for
Kramer DVI & HDMI Products
1000ft
304.8m
INSTALLER SOLUTIONS CATALOG 2014
LENGTH
CABLES & CONNECTORS
19
CABLES & CONNECTORS
jacket
center
conductor
BC-DGKat623
Four−Pair U/FTP Data Bulk Cable (23AWG)
jacket
CABLES & CONNECTORS
center
conductor
Kramer's BC-DGKat623 is a 4-pair U/FTP (unshielded around foiled twisted
pair) cable designed as the ideal companion to Kramer's twisted pair digital
transmitter-receiver sets to provide optimum range and performance.
drain wire
FEATURES
aluminium
polyester
shield
●●
Quality Construction - 4 shielded twisted pairs (U/FTP) of 23AWG solid copper
conductors are cabled together in an unshielded outer jacket.
●●
Optimized for Kramer Hardware - Use with any of Kramer’s wide range of twisted
pair digital transmitter-receiver sets. Terminate with shielded RJ-45 connectors.
●●
RJ-45 Connector - The larger diameter 23AWG twisted pair cable requires a
special RJ-45 connector. Use the Kramer CCR-RJ45-TP6.
●●
Length - Available in pull boxes of 100/305m (328/1000ft).
Specifications:
CONSTRUCTION
Conductor Size:
Outer Jacket Color:
Total Wires:
Drain Wire:
Overall Shield Material:
Conductor Color Code:
23AWG bare solid copper.
Min. Bend Radius:
35mm.
Blue.
8.
Solid 23AWG tinned copper.
Polyester aluminum tape.
White/blue, white/orange, white/green, white/brown.
ELECTRICAL
Propagation Delay Skew:
Impedance:
DC Resistance:
Max. Resistance
Unbalanced:
Capacitance:
35ns/100m max.
100Ω.
73Ω/km (21Ω/1000ft) nominal.
2%.
1.2pF/m max.
CONFIGURATIONS:
20
CABLES & CONNECTORS
Model
Description
BC-DGKat623-100M
23 AWG STP Bulk Cable Optimized for
Kramer DVI & HDMI Products
328ft
100m
BC-DGKat623-305M
23 AWG STP Bulk Cable Optimized for
Kramer DVI & HDMI Products
1000ft
304.8m
INSTALLER SOLUTIONS CATALOG 2014
LENGTH
www.kramerelectronics.com
BC-DGKat7a23
Four−Pair S/FTP Data Bulk Cable (23AWG)
jacket
center
conductor
braided shield
FEATURES
●●
Quality Construction - 4 individually aluminum-foil shielded twisted pairs (S/FTP),
cabled with a drain conductor and overall braid-shielded.
●●
Optimized for Kramer Hardware - Use with any of Kramer’s wide range of twisted
pair digital transmitter-receiver sets. Terminate with shielded RJ-45 connectors.
●●
Length - Available in pull boxes of 100/305m (328/1000ft).
Specifications:
CONSTRUCTION
Conductor Size:
Total Wires:
Internal Shield Material:
Drain Wire:
Overall Shield Material:
Conductor Color Code:
23AWG bare solid copper.
8.
Aluminum poly foil.
Solid 0.41mm (0.016in) tinned copper.
Tinned−copper braid.
White/blue, white/orange, white/green, white/
brown.
ELECTRICAL
Frequency Range:
Propagation Delay Skew:
Velocity of Propagation:
Impedance:
DC Resistance:
Max Resistance Unbalanced:
Capacitance:
Temperature:
Attenuation (dB per 100ft):
1 to 1200MHz.
20ns/100m max.
80% nominal.
100Ω.
65Ω/km (21Ω/1000ft) @20°C nominal.
2%.
1.2pF/m max.
−40° to +65°C (−40° to 149°F).
−1.8dB @1MHz
−4.9dB @10MHz
−15.7dB @100MHz
−27.8dB @300MHz
−40.0dB @600MHz
−52.7dB @1000MHz
REGULATORY
Standards:
IEC 61156, ISO/IEC 11801, RoHS 2002/95/EC.
CONFIGURATIONS:
www.kramerelectronics.com
Model
Description
BC-DGKat7a23-100M
23 AWG STP Bulk Cable Optimized for
Kramer DVI & HDMI Products
328ft
100m
BC-DGKat7a23-305M
23 AWG STP Bulk Cable Optimized for
Kramer DVI & HDMI Products
1000ft
304.8m
INSTALLER SOLUTIONS CATALOG 2014
LENGTH
CABLES & CONNECTORS
21
CABLES & CONNECTORS
drain wire
aluminium
polyester
shield
Kramer's BC-DGKat7a23 is a 4-pair S/FTP (braided shield around foiled twisted
pair) cable designed as the ideal companion to Kramer's twisted pair digital
transmitter-receiver sets to provide optimum range and performance. The cable
is optimized for the new 10GBase-T applications as defined in IEEE 802.3an and
for PoE+.
BC‑XTP
Pico−Skew UTP Bulk Cable
jacket
Kramer's BC-XTP unshielded twisted pair (UTP) cable is designed as the
ideal companion to Kramer analog twisted pair transmitter-receiver sets.
BC-XTP resembles typical CAT 5e, but with internal components optimized for
transmission of video/audio signals rather than high-speed data.
center
conductor
CABLES & CONNECTORS
insulator
FEATURES
●●
Quality Construction - Durable and flexible bulk cable. Four pairs of 24AWG solid
copper.
●●
Optimized for High-res Video/Audio Signals - Four pairs are twisted at the same
ratio so the actual length of each is identical. Video shift or “skew” is eliminated
in long runs because the RGB color signals arrive at the same time. Note that
BC-XTP is not suited for high-speed data or network applications.
●●
Optimized for Kramer Hardware - Use with any of Kramer’s wide range of twisted
pair transmitter-receiver sets such as PT-110/PT-120, WP-110/PT-120,
etc. Terminate with RJ-45 connectors, or strip and attach to terminal strips or
punchdown blocks as needed.
●●
Length - Available in pull boxes of 100/300m (328/985ft).
Specifications:
CONSTRUCTION
Center Conductor:
Jacket Colors:
Outer Jacket Color:
Outer Jacket:
24AWG, solid bare copper.
Brown, brown/white, blue, blue/white, orange,
orange/white, green, green/white.
Green with white lettering.
PVC.
DIAMETERS
Center Conductor:
Outside Diameter:
0.1mm (0.004in).
5.5mm (0.22in).
ELECTRICAL
Impedance:
DC Resistance:
Pair to Pair Skew:
Attenuation (dB/100ft):
100Ω.
100Ω/km (30.4Ω/1000ft).
1.5ns/100m.
−0.6dB @1MHz
−2.0dB @10MHz
−6.7dB @100MHz
−8.5dB @155MHz
−9.7dB @200MHz
−13.6dB @350MHz.
−20° to 75°C (−4° to 167°F).
Temperature:
REGULATORY
UL:
CSA:
CM.
RoHS:
In compliance with European directive 2002/95/IEC.
C(UL) CM, FT4.
CONFIGURATIONS:
22
CABLES & CONNECTORS
Model
Description
BC-XTP-100M
Pico Skew™ UTP 4 Pairs 24 AWG Solid Pull-Box Bulk Cable
328ft
100m
BC-XTP-300M Pico Skew™ UTP 4 Pairs 24 AWG Solid Pull-Box Bulk Cable
985ft
300m
INSTALLER SOLUTIONS CATALOG 2014
LENGTH
www.kramerelectronics.com
BC-STP
CAT 5e STP Bulk Cable
aluminum
Mylar foil
jacket
drain wire
insulation
FEATURES
●●
Quality Construction - Four pairs of solid 24AWG copper surrounded by aluminum
Mylar foil outer shield.
●●
Length - Available in pull boxes of 300m (985ft).
Specifications:
CONSTRUCTION
Center Conductor:
Jacket Colors:
Shield:
Drain Wire:
Outer Jacket:
24AWG, solid bare copper.
Brown, brown/white, blue, blue/white, orange,
orange/white, green, green/white.
Aluminum Mylar foil 25% overlap rate.
24AWG 7/32 tinned copper.
Gray PVC with white lettering.
DIAMETERS
Center Conductor:
Outside Diameter:
0.5mm (0.019in).
6.0mm (0.236in).
ELECTRICAL
Impedance:
DC Resistance:
Mutual Capacitance:
Delay Skew:
Temperature:
100Ω.
93.8Ω/km (30.7Ω/1000ft).
56nF/km nominal.
45nS/100m.
−20° to 75°C (−4° to 167°F).
REGULATORY
UL:
CUL:
RoHS:
CM.
C(UL) CM, FT4.
In compliance with European directive 2002/95/IEC.
CONFIGURATIONS:
www.kramerelectronics.com
Model
Description
BC-STP-300M
Shielded Twisted Pair (STP) 4 Pairs 24 AWG Solid Bulk Cable
INSTALLER SOLUTIONS CATALOG 2014
LENGTH
CABLES & CONNECTORS
985ft
23
300m
CABLES & CONNECTORS
conductor
Kramer’s BC-STP is a high-quality shielded twisted pair cable (STP) suitable
for use in environments with high levels of EMI. It meets the CAT 5e standard
and is suitable for use in network applications or with Kramer’s twisted pair
transmitter/receiver sets.
CABLE ASSEMBLIES
All Kramer cable assemblies, with molded connectors on each end of the cable, are flexible enough for any application or environment.
They come in various lengths of 1-150ft (0.3-45m). All lengths are measured including the connectors at each end.
CABLES & CONNECTORS
VIDEO ASSEMBLIES
15-pin HD
C-GM/GM & C-GM/GF
15−pin HD Cable
Kramer’s GM/GM and GM/GF computer graphics video cables are highperformance cables with molded 15-pin HD connectors on both ends. They are
used for connecting computer graphics video signals between computers or video
scalers and plasma, LCD or other popular display technologies.
Male ‑ Male
FEATURES
●●
Quality Construction - High-resolution 26AWG mini coax for video.
●●
Easy Installation - Pre-terminated with molded 15-pin HD connectors, gold-plated
pins and thumbscrews for easy connection.
●●
All Pins Connected for DDC2 and EDID Support.
●●
Cable Specs - For detailed cable specs, see Kramer BC-3X2T7S.
●●
Varied Selection of Lengths - Available in versions of 0.3 to 45.7m (1 to
150ft).
Male - Female
configurations:
MODEL
DESCRIPTION
LENGTH
Male - Male
C-GM/GM-1
Molded 15-pin HD (M) to 15-pin HD (M) Cable
1ft
0.3m
C-GM/GM-3
Molded 15-pin HD (M) to 15-pin HD (M) Cable
3ft
0.9m
C-GM/GM-6
Molded 15-pin HD (M) to 15-pin HD (M) Cable
6ft
1.8m
C-GM/GM-10
Molded 15-pin HD (M) to 15-pin HD (M) Cable
10ft
3m
C-GM/GM-12
Molded 15-pin HD (M) to 15-pin HD (M) Cable
12ft
3.7m
C-GM/GM-15
Molded 15-pin HD (M) to 15-pin HD (M) Cable
15ft
4.6m
C-GM/GM-25
Molded 15-pin HD (M) to 15-pin HD (M) Cable
25ft
7.6m
C-GM/GM-35
Molded 15-pin HD (M) to 15-pin HD (M) Cable
35ft
10.7m
C-GM/GM-50
Molded 15-pin HD (M) to 15-pin HD (M) Cable
50ft
15.2m
C-GM/GM-75
Molded 15-pin HD (M) to 15-pin HD (M) Cable
75ft
22.9m
C-GM/GM-100
Molded 15-pin HD (M) to 15-pin HD (M) Cable
100ft
30.5m
C-GM/GM-125
Molded 15-pin HD (M) to 15-pin HD (M) Cable
125ft
38.1m
C-GM/GM-150
Molded 15-pin HD (M) to 15-pin HD (M) Cable
150ft
45.7m
C-GM/GF-3
Molded 15-pin HD (M) to 15-pin HD (F) Cable
3ft
0.9m
C-GM/GF-6
Molded 15-pin HD (M) to 15-pin HD (F) Cable
6ft
1.8m
C-GM/GF-10
Molded 15-pin HD (M) to 15-pin HD (F) Cable
10ft
3m
C-GM/GF-15
Molded 15-pin HD (M) to 15-pin HD (F) Cable
15ft
4.6m
C-GM/GF-25
Molded 15-pin HD (M) to 15-pin HD (F) Cable
25ft
7.6m
C-GM/GF-35
Molded 15-pin HD (M) to 15-pin HD (F) Cable
35ft
10.7m
C-GM/GF-50
Molded 15-pin HD (M) to 15-pin HD (F) Cable
50ft
15.2m
C-GM/GF-75
Molded 15-pin HD (M) to 15-pin HD (F) Cable
75ft
22.9m
C-GM/GF-100
Molded 15-pin HD (M) to 15-pin HD (F) Cable
100ft
30.5m
Male - Female
24
CABLES & CONNECTORS
INSTALLER SOLUTIONS CATALOG 2014
www.kramerelectronics.com
C-MGM/MGM
15−pin HD Micro Cable
FEATURES
●●
Quality Construction - Constructed using micro coax conductors and outer diameter
of 5.4mm (0.212in). The 15-pin HD connectors are specially designed with small
profile to fit any high-density installation and all 15 pins are passed through the cable.
●●
Multiple Applications - Ideal for video presentations, home theater and any installation
in tight spaces. Use these cables with our table solutions for your comfort and
efficiency.
●●
All Pins Connected for DDC2 and EDID Support.
●●
Varied Selection of Lengths - Available in versions of 0.3 to 7.6m (1, 2, 3, 6, 10,
15 and 25ft).
configurations:
MODEL
DESCRIPTION
LENGTH
Male - Male
C-MGM/MGM-1
15-Pin HD (M) to 15-Pin (M) Micro VGA Cable
1ft
C-MGM/MGM-2
15-Pin HD (M) to 15-Pin (M) Micro VGA Cable
2ft
0.3m
0.6m
C-MGM/MGM-3
15-Pin HD (M) to 15-Pin (M) Micro VGA Cable
3ft
0.9m
C-MGM/MGM-6
15-Pin HD (M) to 15-Pin (M) Micro VGA Cable
6ft
1.8m
C-MGM/MGM-10
15-Pin HD (M) to 15-Pin (M) Micro VGA Cable
10ft
3m
C-MGM/MGM-15
15-Pin HD (M) to 15-Pin (M) Micro VGA Cable
15ft
4.6m
C-MGM/MGM-25
15-Pin HD (M) to 15-Pin (M) Micro VGA Cable
25ft
7.6m
C-GM/GM(45)
15−pin HD Cable with a 45° Side−Angled Connector
Kramer’s VGA (15-pin HD) cables with angled connectors, are high-performance
cables for computer graphics with molded 15-pin HD connectors at both ends,
one angled at 45°.
FEATURES
●●
Angled Connector - 45° connector with the cable to the side provides a shallower
profile for tight quarters behind a wall plate or rack mounted equipment.
●●
Quality Construction - The cables have a slightly slimmer construction than our
regular C-GM/GM cables, using 28AWG conductors and an outer diameter of
8.5mm (0.334in).
●●
All Pins Connected for DDC2 and EDID Support.
●●
Varied Selection of Lengths - Available in versions of 0.9 to 4.6m (3, 6, 10 and
15ft).
configurations:
MODEL
DESCRIPTION
LENGTH
Male - Male
C-GM/GM(45)-3
15-pin HD (M) to 15-pin HD (M) Cable with 45° Side-Angled Connector
3ft
0.9m
C-GM/GM(45)-6
15-pin HD (M) to 15-pin HD (M) Cable with 45° Side-Angled Connector
6ft
1.8m
C-GM/GM(45)-10
15-pin HD (M) to 15-pin HD (M) Cable with 45° Side-Angled Connector
10ft
3m
C-GM/GM(45)-15
15-pin HD (M) to 15-pin HD (M) Cable with 45° Side-Angled Connector
15ft
4.6m
www.kramerelectronics.com
INSTALLER SOLUTIONS CATALOG 2014
CABLES & CONNECTORS
25
CABLES & CONNECTORS
Kramer’s MGM Micro computer graphics video cables are high-performance
cables with molded 15-pin HD connectors on both ends. These micro coax cables
are thin and flexible and excellent choices for connecting computer graphics video
signals between computers or video scalers and plasma, LCD or other popular
display technologies.
C-GM/GM(90)
15−pin HD Cable with a 90° Down−Angled Connector
CABLES & CONNECTORS
Kramer’s VGA (15-pin HD) cables with angled connectors, are high-performance
cables for computer graphics with molded 15-pin HD connectors at both ends,
one connector angled down at 90°.
FEATURES
●●
Angled Connector - 90° connector with the cable angled down provides a shallower
profile for tight quarters behind a wall plate or rack mounted equipment.
●●
Quality Construction - The cables have a slightly slimmer construction than our
regular C-GM/GM cables, using 28AWG conductors and an outer diameter of
8.5mm.
●●
All Pins Connected for DDC2 and EDID Support.
●●
Varied Selection of Lengths - Available in versions of 0.9 to 4.6m (3, 6, 10 and
15ft).
configurations:
MODEL
DESCRIPTION
LENGTH
Male - Male
C-GM/GM(90)-3
15-pin (M) to 15-pin (M) Cable with 90° Down-Angled Connector
3ft
0.9m
C-GM/GM(90)-6
15-pin (M) to 15-pin (M) Cable with 90° Down-Angled Connector
6ft
1.8m
C-GM/GM(90)-10
15-pin (M) to 15-pin (M) Cable with 90° Down-Angled Connector
10ft
3m
C-GM/GM(90)-15
15-pin (M) to 15-pin (M) Cable with 90° Down-Angled Connector
15ft
4.6m
C-GM/GM(90-UP)
15−pin HD Cable with a 90° Up−Angled Connector
Kramer’s VGA (15-pin HD) cables with angled connectors, are high-performance
cables for computer graphics with molded 15-pin HD connectors at both ends,
one connector angled up at 90°.
FEATURES
●●
Angled Connector - 90° connector with the cable angled up provides a shallower
profile for tight quarters behind a wall plate or rack mounted equipment.
●●
Quality Construction - The cables have a slightly slimmer construction than our
regular C-GM/GM cables, using 28AWG conductors and an outer diameter of
8.5mm (0.334in).
●●
All Pins Connected for DDC2 and EDID Support.
●●
Varied Selection of Lengths - Available in versions of 0.9 to 4.6m (3, 6, 10 and
15ft).
configurations:
MODEL
DESCRIPTION
LENGTH
Male - Male
C-GM/GM(90-UP)-3
15-pin HD (M) to 15-pin HD (M) Cable with 90° Up-Angled Connector
3ft
0.9m
C-GM/GM(90-UP)-6
15-pin HD (M) to 15-pin HD (M) Cable with 90° Up-Angled Connector
6ft
1.8m
C-GM/GM(90-UP)-10
15-pin HD (M) to 15-pin HD (M) Cable with 90° Up-Angled Connector
10ft
3m
C-GM/GM(90-UP)-15
15-pin HD (M) to 15-pin HD (M) Cable with 90° Up-Angled Connector
15ft
4.6m
26
CABLES & CONNECTORS
INSTALLER SOLUTIONS CATALOG 2014
www.kramerelectronics.com
C-GM/xl
15−pin HD to Open End Installation Cable with EDID
Kramer's new xl generation of C-GM cables offers the highest possible
performance and a new configuration designed to give installers and users a new
level of convenience and aesthetics. They are ideal for any application requiring
no-compromise quality and performance in a VGA cable.
●●
Quality Construction - Molded male 15-pin HD connector installed on one end, and
the corresponding RGBHV coaxes exposed, prestripped and tinned at the other
end. Includes two additional wires to connect pins 12 and 15 for EDID support.
●●
Easy Installation - Pre-stripped and tinned conductors at the bare end provide the
easiest possible installation of a 15-pin HD connector, or to the rear of a Kramer
wall plate with terminal blocks. For typical 5 BNC installation, just cut and prepare
the coaxes as usual for crimp or compression connectors on 26/28AWG mini coax.
●●
Cable Specs - See Kramer BC-5X26 for detailed cable specs.
●●
Varied Selection of Lengths - Available in versions of 4.6 to 45.7m (15, 25, 35,
50, 75, 100 and 150ft).
configurations:
MODEL
DESCRIPTION
LENGTH
Male - Bare End
C-GM/XL-15
15-pin HD (M) to Bare End Installation Cable with EDID
15ft
C-GM/XL-25
15-pin HD (M) to Bare End Installation Cable with EDID
25ft
4.6m
7.6m
C-GM/XL-35
15-pin HD (M) to Bare End Installation Cable with EDID
35ft
10.7m
C-GM/XL-50
15-pin HD (M) to Bare End Installation Cable with EDID
50ft
15.2m
C-GM/XL-75
15-pin HD (M) to Bare End Installation Cable with EDID
75ft
22.9m
C-GM/XL-100
15-pin HD (M) to Bare End Installation Cable with EDID
100ft
30.5m
C-GM/XL-150
15-pin HD (M) to Bare End Installation Cable with EDID
150ft
45.7m
C-GMA/GMA
15−pin HD & 3.5mm Stereo Audio Cable
Kramer’s GMA series are high-performance cables with male 15-pin HD and
3.5mm stereo audio connectors at each end. They are perfect for computer
graphics video to display installations that require an audio signal as well.
FEATURES
●●
Quality Construction - Constructed using our rugged and flexible 14-conductor cable.
●●
Easy Connection - Pre-terminated with molded 15-pin HD connectors (male to
male), gold-plated pins and thumbscrews for easy connection and a 3.5mm stereo
mini jack.
●●
Easy Installation - Audio leads extend 24in (61cm) beyond the 15-pin HD head at
one end, and 20cm (8in) at the other.
●●
All Pins Connected for DDC2 and EDID Support.
●●
Cable Specs - For detailed cable specs, see Kramer BC-3X2T7S.
●●
Varied Selection of Lengths - Available in versions of 0.9 to 22.9m (3, 6, 10, 15,
25, 35, 50 and 75ft).
configurations:
MODEL
DESCRIPTION
LENGTH
Male - Male
C-GMA/GMA-3
15-pin HD (M) to 15-pin HD (M) & 3.5mm Stereo Audio Cable
3ft
0.9m
C-GMA/GMA-6
15-pin HD (M) to 15-pin HD (M) & 3.5mm Stereo Audio Cable
6ft
1.8m
C-GMA/GMA-10
15-pin HD (M) to 15-pin HD (M) & 3.5mm Stereo Audio Cable
10ft
3m
C-GMA/GMA-15
15-pin HD (M) to 15-pin HD (M) & 3.5mm Stereo Audio Cable
15ft
4.6m
C-GMA/GMA-25
15-pin HD (M) to 15-pin HD (M) & 3.5mm Stereo Audio Cable
25ft
7.6m
C-GMA/GMA-35
15-pin HD (M) to 15-pin HD (M) & 3.5mm Stereo Audio Cable
35ft
10.7m
C-GMA/GMA-50
15-pin HD (M) to 15-pin HD (M) & 3.5mm Stereo Audio Cable
50ft
15.2m
C-GMA/GMA-75
15-pin HD (M) to 15-pin HD (M) & 3.5mm Stereo Audio Cable
75ft
22.9m
www.kramerelectronics.com
INSTALLER SOLUTIONS CATALOG 2014
CABLES & CONNECTORS
27
CABLES & CONNECTORS
FEATURES
C-MGMA/MGMA
CABLES & CONNECTORS
15−pin HD & 3.5mm Stereo Audio Micro Cable
Kramer’s MGMA series are micro sized high-performance cables for computer
graphics and audio with slim molded 15-pin HD and 3.5mm connectors at both
ends. These micro coax cables are thin and flexible and excellent choices for
connecting computer graphics video and audio signals between computers or
video scalers and plasma, LCD or other popular display technologies.
FEATURES
●●
Quality Construction - Constructed using micro coax conductors and outer diameter
of 6.0mm (0.236in). The 15-pin HD connectors are specially designed with a small
profile to fit any high density installation and all 15 pins are passed through the
cable. The audio leads are 61.0cm (24in) long at one end and 20.3cm (8in) on
other end.
●●
Multiple Applications - Ideal for video presentations, home theater and any
installation in tight spaces. Use these cables with our table solutions for your
comfort and efficiency.
●●
All Pins Connected for DDC2 and EDID Support.
●●
Varied Selection of Lengths - Available in versions of 0.9 to 7.6m (3, 6, 10, 15
and 25ft).
configurations:
MODEL
DESCRIPTION
LENGTH
Male - Male
C-MGMA/MGMA-3
15-pin HD (M) to 15-pin HD (M) & 3.5mm Stereo Audio Micro VGA Cable
3ft
0.9m
C-MGMA/MGMA-6
C-MGMA/MGMA-10
15-pin HD (M) to 15-pin HD (M) & 3.5mm Stereo Audio Micro VGA Cable
6ft
1.8m
15-pin HD (M) to 15-pin HD (M) & 3.5mm Stereo Audio Micro VGA Cable
10ft
3m
C-MGMA/MGMA-15
15-pin HD (M) to 15-pin HD (M) & 3.5mm Stereo Audio Micro VGA Cable
15ft
4.6m
C-MGMA/MGMA-25
15-pin HD (M) to 15-pin HD (M) & 3.5mm Stereo Audio Micro VGA Cable
25ft
7.6m
C-GMA/GMA(45)
15−pin HD & 3.5mm Stereo Audio Cable with a 45° Side−Angled Connector
Kramer’s 15-pin HD cables with angled connectors, are high-performance cables
for computer graphics applications. The cable has molded 15-pin HD and 3.5mm
connectors at both ends with one 15-pin HD connector angled to the side at 45°.
FEATURES
●●
Angled Connector - One 45° connector with the cable to the side provides a
shallower profile for tight quarters behind a wall plate or rack mounted equipment.
●●
Quality Construction - The cables have a slightly slimmer construction than our
regular C-GMA/GMA cables, using 28AWG conductors and an outer diameter
of 8.5mm.
●●
All Pins Connected for DDC2 and EDID Support.
●●
Varied Selection of Lengths - Available in versions of 0.9 to 4.6m (3, 6, 10 and
15ft).
configurations:
MODEL
DESCRIPTION
LENGTH
Male - Male
C-GMA/GMA(45)-3
15-pin HD (M) to 15-pin HD (M) with 3.5mm Audio Cable & 45° Side-Angled Connector
3ft
0.9m
C-GMA/GMA(45)-6
15-pin HD (M) to 15-pin HD (M) with 3.5mm Audio Cable & 45° Side-Angled Connector
6ft
1.8m
C-GMA/GMA(45)-10
15-pin HD (M) to 15-pin HD (M) with 3.5mm Audio Cable & 45° Side-Angled Connector
10ft
3m
C-GMA/GMA(45)-15
15-pin HD (M) to 15-pin HD (M) with 3.5mm Audio Cable & 45° Side-Angled Connector
15ft
4.6m
28
CABLES & CONNECTORS
INSTALLER SOLUTIONS CATALOG 2014
www.kramerelectronics.com
C-GMA/GMA(90)
15−pin HD & 3.5mm Stereo Audio Cable with a 90° Down−Angled Connector
Kramer’s 15-pin HD cables with angled connectors, are high-performance
cables for computer graphics applications. The cable has molded 15-pin HD and
3.5mm connectors at both ends with one 15-pin HD connector angled down 90°.
Angled Connector - 90° connector with the cable angled down provides a shallower
profile for tight quarters behind a wall plate or rack mounted equipment.
●●
Quality Construction - The cables have a slightly slimmer construction than our
regular C-GMA/GMA cables, using 28AWG conductors and an outer diameter
of 8.5mm.
●●
All Pins Connected for DDC2 and EDID Support.
●●
Varied Selection of Lengths - Available in versions of 0.9 to 4.6m (3,6,10 and
15ft).
configurations:
MODEL
DESCRIPTION
LENGTH
Male - Male
C-GMA/GMA(90)-3
15-pin (M) to 15-pin (M) with 3.5mm Audio Cable & 90° Down-Angled Connector
3ft
0.9m
C-GMA/GMA(90)-6
C-GMA/GMA(90)-10
15-pin (M) to 15-pin (M) with 3.5mm Audio Cable & 90° Down-Angled Connector
6ft
1.8m
15-pin (M) to 15-pin (M) with 3.5mm Audio Cable & 90° Down-Angled Connector
10ft
C-GMA/GMA(90)-15
3m
15-pin (M) to 15-pin (M) with 3.5mm Audio Cable & 90° Down-Angled Connector
15ft
4.6m
C-GMA/GMA(90-UP)
15−pin HD & 3.5mm Stereo Audio Cable with a 90° Up−Angled Connector
Kramer’s 15-pin HD cables with angled connectors, are high-performance cables
for computer graphics applications. The cable has molded 15-pin HD and 3.5mm
connectors at both ends with one 15-pin HD connector angled up 90°.
FEATURES
●●
Angled Connector - 90° up connector provides a shallower profile for tight quarters
behind a wall plate or rack mounted equipment.
●●
Quality Construction - The cables have a slightly slimmer construction than our
regular C-GMA/GMA cables, using 28AWG conductors and an outer diameter
of 8.5mm.
●●
All Pins Connected for DDC2 and EDID Support.
●●
Varied Selection of Lengths - Available in versions of 0.9 to 4.6m (3, 6, 10 and
15ft).
configurations:
MODEL
DESCRIPTION
LENGTH
Male - Male
C-GMA/GMA(90-UP)-6
15-pin HD (M) to 15-pin HD (M) with 3.5mm Audio Cable &
90° Up-Angled Connector
15-pin HD (M) to 15-pin HD (M) with 3.5mm Audio Cable & 90° Up-Angled Connector
C-GMA/GMA(90-UP)-10
15-pin HD (M) to 15-pin HD (M) with 3.5mm Audio Cable & 90° Up-Angled Connector
10ft
3m
C-GMA/GMA(90-UP)-15
15-pin HD (M) to 15-pin HD (M) with 3.5mm Audio Cable & 90° Up-Angled Connector
15ft
4.6m
C-GMA/GMA(90-UP)-3
www.kramerelectronics.com
INSTALLER SOLUTIONS CATALOG 2014
CABLES & CONNECTORS
3ft
0.9m
6ft
1.8m
29
CABLES & CONNECTORS
FEATURES
●●
C-GMAC/GMAC
15−pin HD, 3.5mm Stereo Audio & RJ−45 Cable CABLES & CONNECTORS
Kramer’s GMAC cables feature 15-pin HD, 3.5mm stereo audio and RJ-45
connectors at each end. They are designed for PC and laptop users who require
connection of VGA, audio and LAN over a single cable.
FEATURES
●●
Quality Construction - Flexible cable, all pins of the 15-pin HD connector are passed
through. The audio leads are 61.0cm long (24in) at one end and 20.0cm (8in) on
the other end. The RJ-45 ends are 15cm (6in) long with gold-plated connectors.
●●
Conductors - Micro coax conductors for the VGA cable and 24AWG wire for the
UTP CAT 5e.
●●
Connectors - Small profile 15-pin HD connectors fit high-density installations.
●●
All Pins Connected for DDC2 and EDID Support.
●●
Varied Selection of Lengths - Available in versions of 0.9 to 7.6m (3, 6, 10, 15, 25ft).
configurations:
MODEL
DESCRIPTION
LENGTH
Male - Male
C-GMAC/GMAC-3
15-pin HD, 3.5mm Audio & RJ-45 (M-M) Cable
3ft
0.9m
C-GMAC/GMAC-6
15-pin HD, 3.5mm Audio & RJ-45 (M-M) Cable
6ft
1.8m
C-GMAC/GMAC-10
15-pin HD, 3.5mm Audio & RJ-45 (M-M) Cable
10ft
3m
C-GMAC/GMAC-15
15-pin HD, 3.5mm Audio & RJ-45 (M-M) Cable
15ft
4.6m
C-GMAC/GMAC-25
15-pin HD, 3.5mm Audio & RJ-45 (M-M) Cable
25ft
7.6m
C-MH1/MH1
15−pin HD, 3.5mm Stereo Audio & 3 RCA Hydra™ Multi−Head Cable
Kramer's Hydra multi-head cables contain a 15-pin HD (M), 3.5mm (M) & 3 RCA
(M) cables. They are designed for applications that require multiple signals in a
single jacket.
FEATURES
●●
Quality Construction - Rugged and flexible cable with attractive high-quality molded
connectors.
●●
Flexible Applications - Use the 15-pin HD, 3.5mm stereo, and 3 RCA connectors
for any combination of typical VGA, video, and audio signals. The mini connector
may also support remote control in some cases, and the RCAs support composite
video, analog or digital audio.
●●
Companion Wall Plate - The MH1 style multi-head cable is designed to match the
Kramer WAV-5 wall plate.
●●
All Pins Connected for DDC2 and EDID Support.
●●
Varied Selection of Lengths - Available in versions of 0.9 to 45.7m (3, 6, 10, 15,
25, 35, 50, 75, 100, 125 and 150ft).
configurations:
MODEL
DESCRIPTION
LENGTH
Male - Male
C-MH1/MH1-3
Molded 15-pin HD, 3.5mm Audio & 3 RCA Cable
3ft
0.9m
C-MH1/MH1-6
Molded 15-pin HD, 3.5mm Audio & 3 RCA Cable
6ft
1.8m
C-MH1/MH1-10
Molded 15-pin HD, 3.5mm Audio & 3 RCA Cable
10ft
3m
C-MH1/MH1-15
Molded 15-pin HD, 3.5mm Audio & 3 RCA Cable
15ft
4.6m
C-MH1/MH1-25
Molded 15-pin HD, 3.5mm Audio & 3 RCA Cable
25ft
7.6m
C-MH1/MH1-35
Molded 15-pin HD, 3.5mm Audio & 3 RCA Cable
35ft
10.7m
C-MH1/MH1-50
Molded 15-pin HD, 3.5mm Audio & 3 RCA Cable
50ft
15.2m
C-MH1/MH1-75
Molded 15-pin HD, 3.5mm Audio & 3 RCA Cable
75ft
22.9m
C-MH1/MH1-100
Molded 15-pin HD, 3.5mm Audio & 3 RCA Cable
100ft
30.5m
C-MH1/MH1-125
Molded 15-pin HD, 3.5mm Audio & 3 RCA Cable
125ft
38.1m
C-MH1/MH1-150
Molded 15-pin HD, 3.5mm Audio & 3 RCA Cable
150ft
45.7m
30
CABLES & CONNECTORS
INSTALLER SOLUTIONS CATALOG 2014
www.kramerelectronics.com
C-MHWP500
Multi−Head to Open End WP−500 Installation Cable
FEATURES
●●
Quality Construction - Molded 15 pin HD (M), 9-pin D-sub(M), 3.5mm mini jack
(M), 3 RCA (M), and 3.5mm mini jack (F) connectors installed on one end, and the
corresponding exposed, pre-stripped and tinned wires at the other end.
●●
Easy Installation - Pre-stripped and tinned conductors at the bare end, all labeled
according to the print of the rear panel of the WP-500 to provide the easiest
possible installation.
●●
Flexible Applications - Easily and quickly integrated into conference room and
classroom environments.
●●
Companion Wall Plate - WP-500.
●●
Varied Selection of Lengths - 10.7 and 15.2m (35 and 50ft).
configurations:
MODEL
DESCRIPTION
C-MHWP500-35
Multi-Head WP-500 Installation Cable
35ft
LENGTH
10.7m
C-MHWP500-50
Multi-Head WP-500 Installation Cable
50ft
15.2m
C-GM/3RVM & C-GM/3RVF
15−pin HD to 3 RCA Breakout Cable
Kramer’s computer graphics video to component video breakout cables are
constructed from 3 mini coax cables with a 15-pin HD (M) connector at one
end and 3 RCA (M or F) connectors at the other. These cables send or receive
computer graphics video or component video signals.
FEATURES
Male ‑ Female
●●
Quality Construction - Rugged and high-resolution 3 mini coax cable with molded
connectors.
●●
Numerous Applications - Allows Kramer 15-pin HD distribution amplifiers, switchers
and scaler switchers to route component video signals.
●●
Varied Selection of Lengths - Male-to-male 0.9 and 1.8m (3 and 6ft), male-to-female
0.3m (1ft).
Male ‑ Male
configurations:
MODEL
DESCRIPTION
LENGTH
Male - Female
15-pin HD (M) to 3 RCA (F) Breakout Cable
1ft
0.3m
C-GM/3RVM-3
15-pin HD (M) to 3 RCA (M) Breakout Cable
3ft
0.9m
C-GM/3RVM-6
15-pin HD (M) to 3 RCA (M) Breakout Cable
6ft
1.8m
C-GM/3RVF-1
Male - Male
www.kramerelectronics.com
INSTALLER SOLUTIONS CATALOG 2014
CABLES & CONNECTORS
31
CABLES & CONNECTORS
Kramer’s C-MHWP500 is a cost-effective cable assembly designed for use with
the WP-500 Wall Plate switcher. The multipurpose cable bundles cables for
computer graphics video, composite video, stereo audio, RS-232 and IR signals
in a single jacket. It is constructed of several connectors at one end and bare
wire at the other end.
C-GM/5BM & C-GM/5BF & C-GF/5BM & C-GF/5BF
15-pin HD to 5 BNC Breakout Cable
CABLES & CONNECTORS
Kramer’s computer graphics video breakout cables are constructed of 5 mini
coax cables with a molded 15-pin HD (M or F) on one end and 5 BNC (M or F) on
the other. They convert between the two most common cabling formats used for
routing computer graphic video signals, 15-pin HD, and 5 BNC.
Male ‑ Male
FEATURES
●●
Quality Construction - Constructed using Kramer BC-5X high resolution mini coax
cable, terminated with molded 15-pin HD connector on one end and 75Ω BNC
connectors on the other.
●●
Easy Installation - Models 1.8m (6ft) or longer have an 46.0cm (18in) long spread
at the 5 BNC end to fit large routers/switchers such as the Sierra Pro 32 series.
●●
Cable Specs - For detailed cable specs, see Kramer BC-5X.
●●
Varied Selection of Lengths - Available in versions of 0.2 to 30.5m (0.5 to 100ft).
configurations:
Female ‑ Male
MODEL
DESCRIPTION
LENGTH
Male - Male
Male ‑ Female
C-GM/5BM-1
Molded 15-pin HD (M) to 5 BNC (M) Breakout Cable
1ft
0.3m
C-GM/5BM-3
Molded 15-pin HD (M) to 5 BNC (M) Breakout Cable
3ft
0.9m
C-GM/5BM-6
Molded 15-pin HD (M) to 5 BNC (M) Breakout Cable
6ft
1.8m
C-GM/5BM-10
Molded 15-pin HD (M) to 5 BNC (M) Breakout Cable
10ft
3m
C-GM/5BM-15
Molded 15-pin HD (M) to 5 BNC (M) Breakout Cable
15ft
4.6m
C-GM/5BM-25
Molded 15-pin HD (M) to 5 BNC (M) Breakout Cable
25ft
7.6m
C-GM/5BM-50
Molded 15-pin HD (M) to 5 BNC (M) Breakout Cable
50ft
15.2m
C-GM/5BM-75
Molded 15-pin HD (M) to 5 BNC (M) Breakout Cable
75ft
22.9m
C-GM/5BM-100
Molded 15-pin HD (M) to 5 BNC (M) Breakout Cable
100ft
30.5m
Female - Male
C-GF/5BM-1
Molded 15-pin HD (F) to 5 BNC (M) Breakout Cable
1ft
0.3m
C-GF/5BM-3
Molded 15-pin HD (F) to 5 BNC (M) Breakout Cable
3ft
0.9m
C-GF/5BM-6
Molded 15-pin HD (F) to 5 BNC (M) Breakout Cable
6ft
1.8m
C-GF/5BM-10
Molded 15-pin HD (F) to 5 BNC (M) Breakout Cable
10ft
3m
C-GF/5BM-15
Molded 15-pin HD (F) to 5 BNC (M) Breakout Cable
15ft
4.6m
C-GF/5BM-25
Molded 15-pin HD (F) to 5 BNC (M) Breakout Cable
25ft
7.6m
C-GM/5BF-0.5
Molded 15-pin HD (M) to 5 BNC (F) Breakout Cable
0.5ft
0.15m
C-GM/5BF-1
Molded 15-pin HD (M) to 5 BNC (F) Breakout Cable
1ft
0.3m
C-GM/5BF-3
Molded 15-pin HD (M) to 5 BNC (F) Breakout Cable
3ft
0.9m
C-GM/5BF-6
Molded 15-pin HD (M) to 5 BNC (F) Breakout Cable
6ft
1.8m
C-GM/5BF-10
Molded 15-pin HD (M) to 5 BNC (F) Breakout Cable
10ft
3m
C-GM/5BF-15
Molded 15-pin HD (M) to 5 BNC (F) Breakout Cable
15ft
4.6m
C-GM/5BF-25
Molded 15-pin HD (M) to 5 BNC (F) Breakout Cable
25ft
7.6m
C-GF/5BF-0.5
Molded 15-pin HD (F) to 5 BNC (F) Breakout Cable
0.5ft
0.15m
C-GF/5BF-3
Molded 15-pin HD (F) to 5 BNC (F) Breakout Cable
3ft
0.9m
C-GF/5BF-6
Molded 15-pin HD (F) to 5 BNC (F) Breakout Cable
6ft
1.8m
C-GF/5BF-10
Molded 15-pin HD (F) to 5 BNC (F) Breakout Cable
10ft
3m
C-GF/5BF-15
Molded 15-pin HD (F) to 5 BNC (F) Breakout Cable
15ft
4.6m
C-GF/5BF-25
Molded 15-pin HD (F) to 5 BNC (F) Breakout Cable
25ft
7.6m
C-GF/5BF-35
Molded 15-pin HD (F) to 5 BNC (F) Breakout Cable
35ft
10.7m
C-GF/5BF-50
Molded 15-pin HD (F) to 5 BNC (F) Breakout Cable
50ft
15.2m
Male - Female
Female ‑ Female
Female - Female
32
CABLES & CONNECTORS
INSTALLER SOLUTIONS CATALOG 2014
www.kramerelectronics.com
BNC
C-BM/BM
BNC Coax Video Cable
FEATURES
●●
Quality Construction - RG-6 cable for the highest resolution signals.
●●
High-Quality Connectors - True 75Ω BNC connectors maintain correct impedance
end-to-end.
●●
Cable Specs - Tested to 3G. For detailed cable specs, see Kramer BC-1X.
●●
Varied Selection of Lengths - Available in versions of 0.45 to 45m (1.5, 3, 6, 10,
15, 25, 35, 50, 75, 100 and 150ft).
configurations:
MODEL
DESCRIPTION
LENGTH
Male - Male
C-BM/BM-1.5
1 BNC (M) to 1 BNC (M) RG-6 Video Cable
1.5ft
0.5m
C-BM/BM-3
1 BNC (M) to 1 BNC (M) RG-6 Video Cable
3ft
0.9m
C-BM/BM-6
1 BNC (M) to 1 BNC (M) RG-6 Video Cable
6ft
1.8m
C-BM/BM-10
1 BNC (M) to 1 BNC (M) RG-6 Video Cable
10ft
3m
C-BM/BM-15
1 BNC (M) to 1 BNC (M) RG-6 Video Cable
15ft
4.6m
C-BM/BM-25
1 BNC (M) to 1 BNC (M) RG-6 Video Cable
25ft
7.6m
C-BM/BM-35
1 BNC (M) to 1 BNC (M) RG-6 Video Cable
35ft
10.7m
C-BM/BM-50
1 BNC (M) to 1 BNC (M) RG-6 Video Cable
50ft
15.2m
C-BM/BM-75
1 BNC (M) to 1 BNC (M) RG-6 Video Cable
75ft
22.9m
C-BM/BM-100
1 BNC (M) to 1 BNC (M) RG-6 Video Cable
100ft
30.5m
C-BM/BM-150
1 BNC (M) to 1 BNC (M) RG-6 Video Cable
150ft
45.7m
C-MBM/MBM
BNC Mini Coax Video Cable
Kramer’s MBM series are “micro” sized video cables with male BNC connectors
at both ends. They are ideal for short to medium length composite video
applications when an extremely small profile and maximum flexibility is desired.
FEATURES
●●
Quality Construction - Built from compact, durable and flexible 28AWG mini coax
cable with molded 75Ω BNC connectors.
●●
Compatibility - Use this cable to patch together sources and destinations that use
BNC connectors for video signals.
●●
Varied Selection of Lengths - Available in versions of 0.3 to 7.6m (1, 2, 3, 6, 10,
15 and 25ft).
configurations:
MODEL
DESCRIPTION
LENGTH
Male - Male
C-MBM/MBM-1
1 BNC (M) to 1 BNC (M) Micro-Sized Molded Cable
1ft
C-MBM/MBM-2
1 BNC (M) to 1 BNC (M) Micro-Sized Molded Cable
2ft
0.6m
C-MBM/MBM-3
1 BNC (M) to 1 BNC (M) Micro-Sized Molded Cable
3ft
0.9m
C-MBM/MBM-6
1 BNC (M) to 1 BNC (M) Micro-Sized Molded Cable
6ft
1.8m
C-MBM/MBM-10
1 BNC (M) to 1 BNC (M) Micro-Sized Molded Cable
10ft
3m
C-MBM/MBM-15
1 BNC (M) to 1 BNC (M) Micro-Sized Molded Cable
15ft
4.6m
C-MBM/MBM-25
1 BNC (M) to 1 BNC (M) Micro-Sized Molded Cable
25ft
7.6m
www.kramerelectronics.com
INSTALLER SOLUTIONS CATALOG 2014
CABLES & CONNECTORS
0.3m
33
CABLES & CONNECTORS
Kramer’s BM series cables are constructed of high performance RG-6 cable with
75Ω BNC connectors at each end. They offer outstanding quality, durability, and
high performance for any video signal application.
C-5BM/5BM
5 BNC RGBHV Mini Coax Cable
CABLES & CONNECTORS
Kramer’s 5BM series cables are constructed of 5 mini coax cables in a single
jacket with 75Ω BNC connectors at each end. They offer outstanding quality,
durability, and high performance for any RGBHV video signal application.
FEATURES
●●
Quality Construction - Constructed from flexible, high quality 5 mini coax cable.
●●
Applications - Ideal for routing typical computer graphics video RGBHV signals to
display devices such as projectors and monitors.
●●
Easy Installation - Breakout length is 0.5m (18in) on any cables 1.8m (6ft) or
longer. Shorter cables have approx 0.18m (7in) breakout length.
●●
Cable Specs - For detailed cable specs, see Kramer BC-5X.
●●
Varied Selection of Lengths - Available in versions of 0.9 to 30.5m (3, 6, 10, 15,
25, 35, 50, 75 and 100ft).
configurations:
MODEL
DESCRIPTION
LENGTH
Male - Male
C-5BM/5BM-3
5 BNC (M) to 5 BNC (M) Cable
3ft
0.9m
C-5BM/5BM-6
5 BNC (M) to 5 BNC (M) Cable
6ft
1.8m
C-5BM/5BM-10
5 BNC (M) to 5 BNC (M) Cable
10ft
3m
C-5BM/5BM-15
5 BNC (M) to 5 BNC (M) Cable
15ft
4.6m
C-5BM/5BM-25
5 BNC (M) to 5 BNC (M) Cable
25ft
7.6m
C-5BM/5BM-35
5 BNC (M) to 5 BNC (M) Cable
35ft
10.7m
C-5BM/5BM-50
5 BNC (M) to 5 BNC (M) Cable
50ft
15.2m
C-5BM/5BM-75
5 BNC (M) to 5 BNC (M) Cable
75ft
22.9m
C-5BM/5BM-100
5 BNC (M) to 5 BNC (M) Cable
100ft
30.5m
34
CABLES & CONNECTORS
INSTALLER SOLUTIONS CATALOG 2014
www.kramerelectronics.com
RCA
C-RVM/RVM
RCA Composite Video Cable
FEATURES
●●
Quality Construction - Constructed from RG-59 cable for transparent performance
with composite video signals.
●●
High-Quality Connectors - Molded connectors are yellow to match video connectors
on typical equipment.
●●
Varied Selection of Lengths - Available in 3, 6, 10, 12, 15, 25, 35, 50, 75 and
100ft versions (0.9 to 30.5m).
configurations:
MODEL
DESCRIPTION
LENGTH
Male - Male
C-RVM/RVM-3
1 RCA (M) to 1 RCA (M) Molded Cable
3ft
0.9m
C-RVM/RVM-6
1 RCA (M) to 1 RCA (M) Molded Cable
6ft
1.8m
C-RVM/RVM-10
1 RCA (M) to 1 RCA (M) Molded Cable
10ft
3m
C-RVM/RVM-12
1 RCA (M) to 1 RCA (M) Molded Cable
12ft
3.7m
C-RVM/RVM-15
1 RCA (M) to 1 RCA (M) Molded Cable
15ft
4.6m
C-RVM/RVM-25
1 RCA (M) to 1 RCA (M) Molded Cable
25ft
7.6m
C-RVM/RVM-35
1 RCA (M) to 1 RCA (M) Molded Cable
35ft
10.7m
C-RVM/RVM-50
1 RCA (M) to 1 RCA (M) Molded Cable
50ft
15.2m
C-RVM/RVM-75
1 RCA (M) to 1 RCA (M) Molded Cable
75ft
22.9m
C-RVM/RVM-100
1 RCA (M) to 1 RCA (M) Molded Cable
100ft
30.5m
C-MRVM/MRVM
RCA Composite Video Mini Coax Cable
Kramer’s MRVM series cables are “micro” sized video cables with male RCA
connectors at both ends. They are ideal for short to medium length composite
video applications when an extremely small profile and maximum flexibility is
desired.
FEATURES
●●
Quality Construction - Built from compact, durable and flexible 28AWG mini coax
cable with molded RCA connectors.
●●
Compatibility - Use this cable to patch together sources and destinations that use
RCA connectors for video signals.
●●
Varied Selection of Lengths - Available in versions of 0.3 to 7.6m (1, 2, 3, 6, 10,
15 and 25ft).
configurations:
MODEL
DESCRIPTION
LENGTH
Male - Male
C-MRVM/MRVM-1
1 RCA (M) to 1 RCA (M) Molded Micro Cable
1ft
C-MRVM/MRVM-2
1 RCA (M) to 1 RCA (M) Molded Micro Cable
2ft
0.6m
C-MRVM/MRVM-3
1 RCA (M) to 1 RCA (M) Molded Micro Cable
3ft
0.9m
C-MRVM/MRVM-6
1 RCA (M) to 1 RCA (M) Molded Micro Cable
6ft
1.8m
C-MRVM/MRVM-10
1 RCA (M) to 1 RCA (M) Molded Micro Cable
10ft
3m
C-MRVM/MRVM-15
1 RCA (M) to 1 RCA (M) Molded Micro Cable
15ft
4.6m
C-MRVM/MRVM-25
1 RCA (M) to 1 RCA (M) Molded Micro Cable
25ft
7.6m
www.kramerelectronics.com
INSTALLER SOLUTIONS CATALOG 2014
CABLES & CONNECTORS
0.3m
35
CABLES & CONNECTORS
Kramer's RVM series cables are constructed of RG-59 cable with male RCA
connectors at each end. They offer outstanding quality, durability, and highperformance for any composite video or mono audio signal.
C-3RVM/3RVM
3 RCA Component Video Cable
CABLES & CONNECTORS
Kramer's 3RVM series cables are constructed of 3 RG-59 cables in a flat
configuration with male RCA connectors at each end. They offer outstanding
quality, durability, and high-performance for any component video application.
FEATURES
●●
Quality Construction - Constructed from triple RG-59 cable for perfect transmission
of any interlaced or high definition component video signal.
●●
High Quality Connectors - Rugged gold-plated RCA connectors are color coded
red, green, and blue to match component video connectors on typical equipment.
●●
Multiple Applications - This cable is compatible with any standard or high-definition
analog component video signal including YUV, Y B-Y R-Y, YPbPr and YCbCr. It is
also great for composite video and stereo audio use.
●●
Varied Selection of Lengths - Available in versions of 0.9 to 30.5m (3, 6, 10, 12,
15, 25, 35, 50, 75 and 100ft).
configurations:
MODEL
DESCRIPTION
LENGTH
Male - Male
C-3RVM/3RVM-3
3 RCA (M) to 3 RCA (M) Cable (3 RG-59 for Component Video)
3ft
0.9m
C-3RVM/3RVM-6
3 RCA (M) to 3 RCA (M) Cable (3 RG-59 for Component Video)
6ft
1.8m
C-3RVM/3RVM-10
3 RCA (M) to 3 RCA (M) Cable (3 RG-59 for Component Video)
10ft
3m
C-3RVM/3RVM-12
3 RCA (M) to 3 RCA (M) Cable (3 RG-59 for Component Video)
12ft
3.7m
C-3RVM/3RVM-15
3 RCA (M) to 3 RCA (M) Cable (3 RG-59 for Component Video)
15ft
4.6m
C-3RVM/3RVM-25
3 RCA (M) to 3 RCA (M) Cable (3 RG-59 for Component Video)
25ft
7.6m
C-3RVM/3RVM-35
3 RCA (M) to 3 RCA (M) Cable (3 RG-59 for Component Video)
35ft
10.7m
C-3RVM/3RVM-50
3 RCA (M) to 3 RCA (M) Cable (3 RG-59 for Component Video)
50ft
15.2m
C-3RVM/3RVM-75
3 RCA (M) to 3 RCA (M) Cable (3 RG-59 for Component Video)
75ft
22.9m
C-3RVM/3RVM-100
3 RCA (M) to 3 RCA (M) Cable (3 RG-59 for Component Video)
100ft
30.5m
C-R3VM/R3VM
3 RCA Component Video Mini High−Resolution Cable
Kramer's R3VM series cables are constructed of 28AWG high resolution mini
coax cables in a single jacket with male RCA connectors at each end. They offer
outstanding quality, durability, and high-performance and are designed for home
theater applications.
FEATURES
●●
Quality Construction - Constructed using rugged and flexible 28AWG cable
containing 3 mini coaxes.
●●
High-Quality Connectors - Coaxes are contained in a single round jacket, and are
terminated with premium quality gold-plated, color-coded RCA connectors.
●●
Multiple Applications - This cable is compatible with any standard or high definition
analog component video signal including YUV, Y B-Y R-Y, YPbPr and YCbCr.
●●
Cable Specs - For detailed cable specs, see Kramer BC-3X specs.
●●
Varied Selection of Lengths - Available in versions of 0.9 to 15.2m (3, 6, 10, 15,
25, 35 and 50ft).
configurations:
MODEL
DESCRIPTION
LENGTH
Male - Male
C-R3VM/R3VM-3
3 RCA (M) to 3 RCA (M) Cable (3 28 AWG Mini Coax)
3ft
0.9m
C-R3VM/R3VM-6
3 RCA (M) to 3 RCA (M) Cable (3 28 AWG Mini Coax)
6ft
1.8m
C-R3VM/R3VM-10
3 RCA (M) to 3 RCA (M) Cable (3 28 AWG Mini Coax)
10ft
3m
C-R3VM/R3VM-15
3 RCA (M) to 3 RCA (M) Cable (3 28 AWG Mini Coax)
15ft
4.6m
C-R3VM/R3VM-25
3 RCA (M) to 3 RCA (M) Cable (3 28 AWG Mini Coax)
25ft
7.6m
C-R3VM/R3VM-35
3 RCA (M) to 3 RCA (M) Cable (3 28 AWG Mini Coax)
35ft
10.7m
C-R3VM/R3VM-50
3 RCA (M) to 3 RCA (M) Cable (3 28 AWG Mini Coax)
50ft
15.2m
36
CABLES & CONNECTORS
INSTALLER SOLUTIONS CATALOG 2014
www.kramerelectronics.com
C-3RVAM/3RVAM
3 RCA Composite Video & Stereo Audio Cable
Kramer's 3RVAM series are high-quality 3 RCA cable assemblies designed for
video and stereo audio signals. They are perfect for connection of DVD players,
VCRs, and consumer style display devices that are routinely used in professional
AV systems.
●●
Quality Construction - Constructed using high-quality 75Ω RG-59 for the video, and
two smaller stranded conductors for L/R audio signals.
●●
Precision Connection - Gold-plated RCA connectors are featured for the best
possible signal transmission without corrosion.
●●
Varied Selection of Lengths - Available in versions of 0.9 to 15.2m (3, 6, 10, 12,
15, 25, 35 and 50ft).
configurations:
MODEL
DESCRIPTION
LENGTH
Male - Male
C-3RVAM/3RVAM-3
3 RCA (M) to 3 RCA (M) Cable (1 RG-59 for Video)
3ft
0.9m
C-3RVAM/3RVAM-6
3 RCA (M) to 3 RCA (M) Cable (1 RG-59 for Video)
6ft
1.8m
C-3RVAM/3RVAM-10
3 RCA (M) to 3 RCA (M) Cable (1 RG-59 for Video)
10ft
3m
C-3RVAM/3RVAM-12
3 RCA (M) to 3 RCA (M) Cable (1 RG-59 for Video)
12ft
3.7m
C-3RVAM/3RVAM-15
3 RCA (M) to 3 RCA (M) Cable (1 RG-59 for Video)
15ft
4.6m
C-3RVAM/3RVAM-25
3 RCA (M) to 3 RCA (M) Cable (1 RG-59 for Video)
25ft
7.6m
C-3RVAM/3RVAM-35
3 RCA (M) to 3 RCA (M) Cable (1 RG-59 for Video)
35ft
10.7m
C-3RVAM/3RVAM-50
3 RCA (M) to 3 RCA (M) Cable (1 RG-59 for Video)
50ft
15.2m
C-R4VM/R4VM
4 RCA Component Video & Digital Audio Mini High−Resolution Cable
Kramer’s 4RVM series cables are constructed from 4 mini coax cables
terminated with RCA connectors at each end. They offer outstanding quality,
durability, and high-performance for any component video & digital audio
application.
FEATURES
●●
Quality Construction - Constructed using rugged and flexible cable containing four
mini coaxes.
●●
High Quality Connectors - Coaxes are contained in a single round jacket, and are
terminated with premium quality gold-plated, color-coded RCA connectors.
●●
Multiple Applications - This cable is compatible with any standard or high definition
analog component video signal including YUV, Y B-Y R-Y, YPbPr and YCbCr. Also
compatible with typical digital audio formats including S/PDIF, Dolby Digital, DTS,
Pro Logic II, etc.
●●
Cable Specs - For detailed cable specs, see Kramer BC-4X.
●●
Varied Selection of Lengths - Available in versions of 0.9 to 15.2m (3, 6, 12, 15,
25, 35 and 50ft).
configurations:
MODEL
DESCRIPTION
LENGTH
Male - Male
C-R4VM/R4VM-3
4 RCA (M) to 4 RCA (M) Cable (4 28 AWG Mini Coax)
3ft
C-R4VM/R4VM-6
4 RCA (M) to 4 RCA (M) Cable (4 28 AWG Mini Coax)
6ft
1.8m
C-R4VM/R4VM-15
4 RCA (M) to 4 RCA (M) Cable (4 28 AWG Mini Coax)
15ft
4.6m
C-R4VM/R4VM-25
4 RCA (M) to 4 RCA (M) Cable (4 28 AWG Mini Coax)
25ft
7.6m
C-R4VM/R4VM-35
4 RCA (M) to 4 RCA (M) Cable (4 28 AWG Mini Coax)
35ft
10.7m
C-R4VM/R4VM-50
4 RCA (M) to 4 RCA (M) Cable (4 28 AWG Mini Coax)
50ft
15.2m
www.kramerelectronics.com
INSTALLER SOLUTIONS CATALOG 2014
CABLES & CONNECTORS
0.9m
37
CABLES & CONNECTORS
FEATURES
C-5RVAM/5RVAM
5 RCA Component Video & Stereo Audio Cable
CABLES & CONNECTORS
Kramer's 5RVAM series are high-quality 5 RCA cable assemblies designed for
component video and stereo audio signals. They are perfect for connection of
DVD players, VCRs, and consumer style display devices that are routinely used in
professional AV systems.
FEATURES
●●
Quality Construction - Constructed with 3 high-quality 75Ω RG-59 for video and
2 stranded conductors for L/R audio signals; terminated with 5 male RCA
connectors at both ends.
●●
Precision Connection - Gold-plated RCA connectors are used for the best possible
signal transmission without corrosion.
●●
Easy to Use - Connectors are molded and color coded red, green, blue for video,
and red and white for audio to match component video and audio connectors found
on most consumer style equipment.
●●
Varied Selection of Lengths - Available in versions of 1.8 to 7.6m (6, 12 and 25ft).
configurations:
MODEL
DESCRIPTION
LENGTH
Male - Male
C-5RVAM/5RVAM-6
5 RCA (M) - 5 RCA (M) Cable (3 RG-59 for Component Video)
6ft
1.8m
C-5RVAM/5RVAM-12
5 RCA (M) - 5 RCA (M) Cable (3 RG-59 for Component Video)
12ft
3.7m
C-5RVAM/5RVAM-25
5 RCA (M) - 5 RCA (M) Cable (3 RG-59 for Component Video)
25ft
7.6m
38
CABLES & CONNECTORS
INSTALLER SOLUTIONS CATALOG 2014
www.kramerelectronics.com
s-VIDEO (4-PIN)
C-SM/SM
s−Video Cable
FEATURES
●●
Quality Construction - Passes luminance (Y) and chrominance (C) signals over a
high-quality 26AWG dual coax cable terminated with 4-pin mini DIN connectors.
●●
High-Quality Connectors - Gold-plated connectors for corrosion resistance and best
possible connection.
●●
Cable Specs - For detailed cable specs, see Kramer BC-2X.
●●
Varied Selection of Lengths - Available in versions of 0.9 to 30.5m (3, 6, 10, 15,
25, 35, 50, 75 and 100ft).
configurations:
MODEL
DESCRIPTION
LENGTH
Male - Male
C-SM/SM-3
4-pin Mini DIN (M) to 4-pin Mini DIN (M) s-Video Cable
3ft
0.9m
C-SM/SM-6
4-pin Mini DIN (M) to 4-pin Mini DIN (M) s-Video Cable
6ft
1.8m
C-SM/SM-10
4-pin Mini DIN (M) to 4-pin-Mini DIN (M) s-Video Cable
10ft
3m
C-SM/SM-15
4-pin Mini DIN (M) to 4-pin Mini DIN (M) s-Video Cable
15ft
4.6m
C-SM/SM-25
4-pin Mini DIN (M) to 4-pin Mini DIN (M) s-Video Cable
25ft
7.6m
C-SM/SM-35
4-pin Mini DIN (M) to 4-pin Mini DIN (M) s-Video Cable
35ft
10.7m
C-SM/SM-50
4-pin Mini DIN (M) to 4-pin Mini DIN (M) s-Video Cable
50ft
15.2m
C-SM/SM-75
4-pin Mini DIN (M) to 4-pin Mini DIN (M) s-Video Cable
75ft
22.9m
C-SM/SM-100
4-pin Mini DIN (M) to 4-pin Mini DIN (M) s-Video Cable
100ft
30.5m
C-SMA/SMA
s−Video & 2 RCA Stereo Audio Cable
Kramer's C-SMA/SMA series cables provide a “1-piece” solution for connecting
s-Video (Y/C) and dual RCA audio signals. Each end is configured with a male
4-pin mini DIN connector and male L/R RCAs.
FEATURES
●●
Quality Construction - Durable and flexible dual coax cable with molded connectors.
●●
Compatibility - Use this cable to patch together sources and destinations like DVD
players, satellite receivers, TVs etc, which use standard consumer type s-Video
and dual RCA audio connectors.
●●
Varied Selection of Lengths - Available in versions of 0.9 to 15.2m (3, 6, 10, 15,
25, 35 and 50ft).
configurations:
MODEL
DESCRIPTION
LENGTH
Male - Male
C-SMA/SMA-3
4-Pin Mini DIN (M) to 4-pin Mini DIN (M) Molded Cable & 2 RCA For Audio
3ft
0.9m
C-SMA/SMA-6
4-Pin Mini DIN (M) to 4-pin Mini DIN (M) Molded Cable & 2 RCA For Audio
6ft
1.8m
C-SMA/SMA-10
4-Pin Mini DIN (M) to 4-pin Mini DIN (M) Molded Cable & 2 RCA For Audio
10ft
3m
C-SMA/SMA-15
4-Pin Mini DIN (M) to 4-pin Mini DIN (M) Molded Cable & 2 RCA For Audio
15ft
4.6m
C-SMA/SMA-25
4-Pin Mini DIN (M) to 4-pin Mini DIN (M) Molded Cable & 2 RCA For Audio
25ft
7.6m
C-SMA/SMA-35
4-Pin Mini DIN (M) to 4-pin Mini DIN (M) Molded Cable & 2 RCA For Audio
35ft
10.7m
C-SMA/SMA-50
4-Pin Mini DIN (M) to 4-pin Mini DIN (M) Molded Cable & 2 RCA For Audio
50ft
15.2m
www.kramerelectronics.com
INSTALLER SOLUTIONS CATALOG 2014
CABLES & CONNECTORS
39
CABLES & CONNECTORS
Kramer’s SM series cables are high performance s-Video (Y/C) cables with
molded 4-pin mini DIN connectors at each end. Luminance and chrominance
signals are carried on separate internal coaxes for superior quality over composite
video.
C-SM/2BM & C-SM/2BF
CABLES & CONNECTORS
s−Video to 2 BNC Breakout Cable
Kramer’s s-Video (Y/C) breakout cable is constructed of dual mini coax cables
with a male s-Video (4-pin) connector on one end and 2 BNCs on the other. They
are used for converting an s-Video signal from the typical 4-pin format to higher
quality dual BNC format preferred for long cable runs. Recommended for use with
the VP-730 and VP-731 Presentation Scaler/Switchers.
FEATURES
●●
Quality Construction - Luminance (Y) and chrominance (C) signals are passed
through a high-quality 26AWG dual coax cable terminated with 4-pin mini DIN and
high quality BNC connectors.
●●
High Quality Connectors - Gold-plated s-Video connectors for corrosion resistance
and best possible connection, and 75Ω BNCs for correct impedance matching.
●●
Flexible Applications - Perfect for integrating consumer products into commercial
display systems.
●●
Lengths - Available in versions of 0.3 and 1.8m (1 and 6ft).
configurations:
MODEL
DESCRIPTION
LENGTH
Male - Male
C-SM/2BM-1
4-pin Mini Din (M) to 2 BNC (M) s-Video Breakout Cable
1ft
0.3m
C-SM/2BM-6
4-pin Mini Din (M) to 2 BNC (M) s-Video Breakout Cable
6ft
1.8m
Male - Female
C-SM/2BF-1
4-pin Mini Din (M) to 2 BNC (F) s-Video Breakout Cable
1ft
0.3m
C-SM/2BF-6
4-pin Mini Din (M) to 2 BNC (F) s-Video Breakout Cable
6ft
1.8m
C-SF/2RVM & C-SM/2RVM
s-Video to 2 RCA Breakout Cable
Kramer's C-SF/2RVM & C-SM/2RVM cables are designed for VP-728 and
VP-729 scalers that require s-Video (Y/C) to be presented in dual RCA format.
FEATURES
●●
Quality Construction - Molded male or female 4-pin s-Video connector at one end,
dual male RCAs connectors at the other.
●●
Varied Selection of Lengths - Available in versions of 0.9 to 3m (0.5, 3, 6 and 10ft).
configurations:
MODEL
DESCRIPTION
LENGTH
Female - Male
4-pin mini-DIN (F) to 2 RCA (M) Breakout Cable
0.5ft
0.15m
C-SM/2RVM-3
4-pin mini-DIN (M) to 2 RCA (M) Breakout Cable
3ft
0.9m
C-SM/2RVM-6
4-pin mini-DIN (M) to 2 RCA (M) Breakout Cable
6ft
1.8m
C-SM/2RVM-10
4-pin mini-DIN (M) to 2 RCA (M) Breakout Cable
10ft
3m
C-SF/2RVM-0.5
Male - Male
40
CABLES & CONNECTORS
INSTALLER SOLUTIONS CATALOG 2014
www.kramerelectronics.com
HDMI
C‑HM/HM
Standard HDMI Cable
FEATURES
●●
Quality Performance - Kramer’s new High Definition Multimedia Interface (HDMI)
cables provide an uncompressed digital link between consumer electronics
equipment such as DVD players, set-top boxes and audio/video monitors such as
plasma display screens for high-definition TVs.
●●
High-Quality Connectors - Gold-plated connectors resist corrosion, and offer the
best possible connectivity.
●●
K-Lock Pull-Resistant Connectors - Provides 15lbs of restraining force for a nonslip connection.
●●
Varied Selection of Lengths - Available in versions of 0.9 to 15.2m (3, 6, 10, 15,
25, 35 and 50ft).
configurations:
MODEL
DESCRIPTION
LENGTH
RESOLUTION
Male - Male
C-HM/HM-3
Standard HDMI (M) to HDMI (M) Cable
3ft
0.9m
C-HM/HM-6
Standard HDMI (M) to HDMI (M) Cable
6ft
1.8m
4Kx2K
4Kx2K
C-HM/HM-10
Standard HDMI (M) to HDMI (M) Cable
10ft
3m
4Kx2K
C-HM/HM-15
Standard HDMI (M) to HDMI (M) Cable
15ft
4.6m
4Kx2K
C-HM/HM-25
Standard HDMI (M) to HDMI (M) Cable
25ft
7.6m
1080p @60Hz/12
C-HM/HM-35
Standard HDMI (M) to HDMI (M) Cable
35ft
10.7m
1080p @60Hz/8
C-HM/HM-50
Standard HDMI (M) to HDMI (M) Cable
50ft
15.2m
1080p @60Hz/8
C-HM/HM/ETH
Standard HDMI Cable with Ethernet
Kramer's HDMI cables are high-performance cables with molded HDMI
connectors at both ends. They support Ethernet Channel, Deep Color, x.v.Color™,
Lip Sync, HDMI Uncompressed Audio Channels, Dolby TrueHD, DTS-HD, CEC.
FEATURES
●●
Quality Performance - Kramer’s new High Definition Multimedia Interface (HDMI)
cables provide an uncompressed digital link between consumer electronics
equipment such as DVD players, set-top boxes and audio/video monitors such as
plasma display screens for high-definition TVs.
●●
High-Quality Connectors - Gold-plated connectors resist corrosion, and offer the
best possible connectivity.
●●
K-Lock Pull-Resistant Connectors - Provides 15lbs of restraining force for a nonslip connection.
●●
Varied Selection of Lengths - Available in versions of 0.9 to 15.2m (3, 6, 10, 15,
25, 35 and 50ft).
configurations:
MODEL
DESCRIPTION
LENGTH
RESOLUTION
Male - Male
C-HM/HM/ETH-3
HDMI (M) to HDMI (M) Cable with Ethernet
3ft
0.9m
1080p @60Hz/12
C-HM/HM/ETH-6
C-HM/HM/ETH-10
HDMI (M) to HDMI (M) Cable with Ethernet
6ft
1.8m
1080p @60Hz/12
HDMI (M) to HDMI (M) Cable with Ethernet
10ft
3m
1080p @60Hz/12
C-HM/HM/ETH-15
HDMI (M) to HDMI (M) Cable with Ethernet
15ft
4.6m
1080p @60Hz/12
C-HM/HM/ETH-25
HDMI (M) to HDMI (M) Cable with Ethernet
25ft
7.6m
1080p @60Hz/12
C-HM/HM/ETH-35
HDMI (M) to HDMI (M) Cable with Ethernet
35ft
10.7m
1080p @60Hz/8
C-HM/HM/ETH-50
HDMI (M) to HDMI (M) Cable with Ethernet
50ft
15.2m
1080p @60Hz/8
www.kramerelectronics.com
INSTALLER SOLUTIONS CATALOG 2014
CABLES & CONNECTORS
41
CABLES & CONNECTORS
Kramer's HDMI cables are high-performance cables with molded HDMI
connectors at both ends. HDMI standard supports high-definition video plus multichannel audio in a single cable.
C-HM/HM/PRO
High−Speed HDMI Cable with Ethernet
CABLES & CONNECTORS
Kramer’s C-HM/HM/PRO high-speed HDMI cable with Ethernet is designed for
advanced equipment that requires high-speed cable connections to ensure a highdefinition experience with the maximum audio and visual impact.
FEATURES
●●
High Data Transfer Rate - Up to 10.2Gbps.
●●
Supported Resolutions - 720p/1080i/1080p, ideal for connecting HD devices to
HD/full HD plasma/LCD, PSP3, Blu-ray and HD DVD.
●●
Deep Color - Supports 24-bit, 30-bit, 36-bit and 48-bit (RGB or YCbCr) color
depths. Best for multimedia applications or home cinema and surround systems.
●●
Multi-Channel Audio Support - Supports audio stream for external decoding by AV
receivers and automatic audio syncing capabilities.
●●
High Quality Connectors - Gold-plated connectors resist corrosion, and offer the
best possible connectivity.
●●
K-Lock Pull-Resistant Connectors - Provides 15lbs of restraining force for a nonslip connection.
●●
Varied Selection of Lengths - Available in versions of 0.9 to 19.8m (3, 6, 10, 15,
25, 35, 50 and 65ft).
configurations:
MODEL
DESCRIPTION
LENGTH
RESOLUTION
Male - Male
C-HM/HM/PRO-3
HDMI (M) to HDMI (M) Home Cinema HDMI Cable with Ethernet
3ft
0.9m
4Kx2K
C-HM/HM/PRO-6
C-HM/HM/PRO-10
HDMI (M) to HDMI (M) Home Cinema HDMI Cable with Ethernet
6ft
1.8m
4Kx2K
HDMI (M) to HDMI (M) Home Cinema HDMI Cable with Ethernet
10ft
3m
4Kx2K
C-HM/HM/PRO-15
HDMI (M) to HDMI (M) Home Cinema HDMI Cable with Ethernet
15ft
4.6m
4Kx2K
C-HM/HM/PRO-25
HDMI (M) to HDMI (M) Home Cinema HDMI Cable with Ethernet
25ft
7.6m
4Kx2K
C-HM/HM/PRO-35
HDMI (M) to HDMI (M) Home Cinema HDMI Cable with Ethernet
35ft
10.7m
[email protected]/12
C-HM/HM/PRO-50
HDMI (M) to HDMI (M) Home Cinema HDMI Cable with Ethernet
50ft
15.2m
[email protected]/12
C-HM/HM/PRO-65
HDMI (M) to HDMI (M) Home Cinema HDMI Cable with Ethernet
65ft
19.5m
[email protected]/12
NEW
C-HM/HM-KRTL
High−Speed HDMI Cable with Ethernet
Kramer’s C-HM/HM-KRTL high-speed HDMI cable with Ethernet is designed for
advanced equipment that requires high-speed cable connections to ensure a highdefinition experience with the maximum audio and visual impact.
FEATURES
●●
High Data Transfer Rate - Up to 10.2Gbps.
●●
Supported Resolutions - 720p/1080i/1080p, ideal for connecting HD devices to
HD/full HD plasma/LCD, PSP3, Blu-ray and HD DVD.
●●
Deep Color - Supports 24-bit, 30-bit, 36-bit and 48-bit (RGB or YCbCr) color
depths. Best for multimedia applications or home cinema and surround systems.
●●
Multi-Channel Audio Support - Supports audio stream for external decoding by AV
receivers and automatic audio syncing capabilities.
●●
High Quality Connectors - Gold-plated connectors resist corrosion, and offer the
best possible connectivity.
●●
K-Lock Pull-Resistant Connectors - Provide 15lbs of restraining force for a non-slip
connection.
●●
Varied Selection of Lengths - Available in retail packaged versions of 1, 2, 3m (3,
7 and 10ft).
configurations:
MODEL
DESCRIPTION
LENGTH
Male - Male
C-HM/HM-KRTL-1M
HDMI (M) to HDMI (M) Home Cinema HDMI Cable with Ethernet, Retail Pack
3.3ft
1m
C-HM/HM-KRTL-2M
HDMI (M) to HDMI (M) Home Cinema HDMI Cable with Ethernet, Retail Pack
6.6ft
2m
C-HM/HM-KRTL-3M
HDMI (M) to HDMI (M) Home Cinema HDMI Cable with Ethernet, Retail Pack
10ft
3m
42
CABLES & CONNECTORS
INSTALLER SOLUTIONS CATALOG 2014
www.kramerelectronics.com
C-HM/HM/FLAT/ETH
High−Speed HDMI Flat Cable with Ethernet
Kramer’s C-HM/HM/FLAT/ETH high-speed flat HDMI cable with Ethernet is
designed for “invisible” and long distance installations. It routes through the wall,
under the carpet, around corners and behind the entertainment system with
ease. The flat design of the cable renders it unobtrusive.
●●
Quality Construction - Constructed from flexible flat cable structured to have less
crosstalk and interference than with traditional round HDMI cables.
●●
High Resolution - The cables are capable of carrying extremely high bandwidth signals,
including 1080p over longer runs than conventional designs, without signal degradation.
●●
High-Quality Connectors - Gold-plated connectors resist corrosion, cut down on
impedance and offer the best possible connectivity.
●●
K-Lock Pull-Resistant Connectors - Provides 15lbs of restraining force for a non-slip
connection.
●●
Varied Selection of Lengths - Available in versions of 0.9 to 22.9m (3, 6, 10, 15,
25, 35, 50 and 75ft).
configurations:
MODEL
DESCRIPTION
LENGTH
RESOLUTION
Male - Male
C-HM/HM/FLAT/ETH-3
High−Speed HDMI (M-M) Flat Cable with Ethernet
3ft
0.9m
4Kx2K
C-HM/HM/FLAT/ETH-6
High−Speed HDMI (M-M) Flat Cable with Ethernet
6ft
1.8m
4Kx2K
C-HM/HM/FLAT/ETH-10
High−Speed HDMI (M-M) Flat Cable with Ethernet
10ft
3m
4Kx2K
C-HM/HM/FLAT/ETH-15
High−Speed HDMI (M-M) Flat Cable with Ethernet
15ft
4.6m
4Kx2K
C-HM/HM/FLAT/ETH-25
High−Speed HDMI (M-M) Flat Cable with Ethernet
25ft
7.6m
[email protected]/12
C-HM/HM/FLAT/ETH-35
High−Speed HDMI (M-M) Flat Cable with Ethernet
35ft
10.7m
[email protected]/12
C-HM/HM/FLAT/ETH-50
High−Speed HDMI (M-M) Flat Cable with Ethernet
50ft
15.2m
[email protected]/12
C-HM/HM/FLAT/ETH-75
High−Speed HDMI (M-M) Flat Cable with Ethernet
75ft
22.9m
[email protected]/8
NEW
C-HM/HM/FLAT-KRTL
High−Speed HDMI Flat Cable with Ethernet
Kramer’s C-HM/HM/FLAT-KRTL is a high-speed flat HDMI cable with Ethernet.
FEATURES
●●
High Data Transfer Rate - Up to 10.2Gbps.
●●
Supported Resolutions - 720p/1080i/1080p, ideal for connecting HD devices to
HD/full HD plasma/LCD, PSP3, Blu-ray and HD DVD.
●●
Deep Color - Supports 24-bit, 30-bit, 36-bit and 48-bit (RGB or YCbCr) color
depths. Best for multimedia applications or home cinema and surround systems.
●●
Multi-Channel Audio Support - Supports audio stream for external decoding by AV
receivers and automatic audio syncing capabilities.
●●
High Quality Connectors - Gold-plated connectors resist corrosion, and offer the
best possible connectivity.
●●
K-Lock Pull-Resistant Connectors - Provide 15lbs of restraining force for a non-slip
connection.
●●
Varied Selection of Lengths - Available in retail packaged versions of 1, 2, 3, 5, 7,
10, 15m (3 to 49ft).
configurations:
MODEL
DESCRIPTION
LENGTH
Male - Male
C-HM/HM/FLAT-KRTL-1M
High−Speed HDMI (M-M) Flat Cable with Ethernet, Retail Pack
3.3ft
C-HM/HM/FLAT-KRTL-2M
High−Speed HDMI (M-M) Flat Cable with Ethernet, Retail Pack
6.6ft
2m
C-HM/HM/FLAT-KRTL-3M
High−Speed HDMI (M-M) Flat Cable with Ethernet, Retail Pack
10ft
3m
C-HM/HM/FLAT-KRTL-5M
High−Speed HDMI (M-M) Flat Cable with Ethernet, Retail Pack
16.4ft
5m
C-HM/HM/FLAT-KRTL-7M
High−Speed HDMI (M-M) Flat Cable with Ethernet, Retail Pack
23ft
7m
C-HM/HM/FLAT-KRTL-10M
High−Speed HDMI (M-M) Flat Cable with Ethernet, Retail Pack
33ft
10m
C-HM/HM/FLAT-KRTL-15M
High−Speed HDMI (M-M) Flat Cable with Ethernet, Retail Pack
49.2ft
15m
www.kramerelectronics.com
INSTALLER SOLUTIONS CATALOG 2014
CABLES & CONNECTORS
1m
43
CABLES & CONNECTORS
FEATURES
C-MHM/MHM
CABLES & CONNECTORS
High−Speed HDMI Flexible Cable with Ethernet
Kramer's C-MHM/MHM is a flexible high-speed HDMI cable with Ethernet. It
is a high-performance cable with molded HDMI connectors at both ends that
supports signals up to 1920x1200 @60Hz and HDMI Ethernet Channel, 12-bit
Deep Color, x.v.Color™, Lip Sync, HDMI Uncompressed Audio Channels, Dolby
TrueHD, DTS-HD, CEC.
FEATURES
●●
K-Lock Pull-Resistant Connectors - Provides 15lbs of restraining force for a nonslip connection.
●●
Varied Selection of Lengths - Available in versions of 0.3 to 7.6m (1, 2, 3, 6, 10,
15, 25ft).
configurations:
MODEL
DESCRIPTION
LENGTH
RESOLUTION
Male - Male
C-MHM/MHM-1
Flexible High−Speed HDMI Cable with Ethernet
1ft
0.3m
4Kx2K
C-MHM/MHM-2
Flexible High−Speed HDMI Cable with Ethernet
2ft
0.6m
4Kx2K
C-MHM/MHM-3
Flexible High−Speed HDMI Cable with Ethernet
3ft
0.9m
4Kx2K
C-MHM/MHM-6
Flexible High−Speed HDMI Cable with Ethernet
6ft
1.8m
4Kx2K
C-MHM/MHM-10
Flexible High−Speed HDMI Cable with Ethernet
10ft
3m
1920x1200 @ 60 Hz
C-MHM/MHM-15
Flexible High−Speed HDMI Cable with Ethernet
15ft
4.6m
1080p @60Hz/12b
C-MHM/MHM-25
Flexible High−Speed HDMI Cable with Ethernet
25ft
7.6m
1080p @60Hz/12
C-MHMA/MHMA
Flexible High−Speed HDMI Cable with Ethernet & 3.5mm Stereo Audio
Kramer's C-MHMA/MHMA is a flexible high-speed HDMI cable with Ethernet
and 3.5mm stereo audio. It is a high-performance cable with molded HDMI
connectors at both ends that supports signals up to 1920x1200 @60Hz
and HDMI Ethernet Channel, 12-bit Deep Color, x.v.Color™, Lip Sync, HDMI
Uncompressed Audio Channels, Dolby TrueHD, DTS-HD, CEC. The cable does
not embed audio.
FEATURES
●●
K-Lock Pull-Resistant Connectors - Provides 15lbs of restraining force for a nonslip connection.
●●
Varied Selection of Lengths - Available in versions of 0.9 to 7.6m (3, 6, 10, 15,
25ft).
configurations:
MODEL
DESCRIPTION
LENGTH
RESOLUTION
Male - Male
C-MHMA/MHMA-3
High−Speed HDMI Flexible Cable with Ethernet & 3.5mm Stereo Audio
3ft
0.9m
4Kx2K
C-MHMA/MHMA-6
High−Speed HDMI Flexible Cable with Ethernet & 3.5mm Stereo Audio
6ft
1.8m
4Kx2K
C-MHMA/MHMA-10
High−Speed HDMI Flexible Cable with Ethernet & 3.5mm Stereo Audio
10ft
3m
4Kx2K
C-MHMA/MHMA-15
High−Speed HDMI Flexible Cable with Ethernet & 3.5mm Stereo Audio
15ft
4.6m
4Kx2K
C-MHMA/MHMA-25
High−Speed HDMI Flexible Cable with Ethernet & 3.5mm Stereo Audio
25ft
7.6m
[email protected]/12
44
CABLES & CONNECTORS
INSTALLER SOLUTIONS CATALOG 2014
www.kramerelectronics.com
C-FOHM/FOHM
Fiber Optic/HDMI Hybrid Cable
Kramer’s all-HDMI cable system is constructed of high-performance hybrid cable
containing fiber optic and copper wires terminated with HDMI connectors on each
end. Transmitter and receiver modules are built in to the cable for sending HDMI
signals long distances with pristine digital image quality.
Quality Construction - Pristine digital transmission of HDMI signals at distances up
to 100m (328ft); available in black jacket. Note: A FODM series cable is an active
electronic product which, like any other, comes with a slight chance of needing
removal or replacement in the future. Therefore, we suggest that these not be
permanently fixed into installations as might be appropriate with an ordinary cable.
If permanent installation is required, see our detachable equivalents such as the
631T/R.
●●
High Resolution - Compatible with all HDTV standards up to 1080p and all VESA
resolutions up to WUXGA (1920x1200) at 60Hz refresh rate with 1 pixel/clock
mode.
●●
Flexible Power Options - Uses +5V internal power supplied via the HDMI/DVI graphic
source to power the transmitter and receiver or from the provided external +5V
power adapter.
●●
Varied Selection of Lengths - Available in versions of 10, 15.2, 20, 30, 50, 100m
(32.8 to 328ft).
configurations:
MODEL
DESCRIPTION
LENGTH
Male - Male
C-FOHM/FOHM-33
HDMI (M) to HDMI (M) Fiber Optic/Copper Hybrid Cable
33ft
10m
C-FOHM/FOHM-50
HDMI (M) to HDMI (M) Fiber Optic/Copper Hybrid Cable
50ft
15.2m
C-FOHM/FOHM-66
HDMI (M) to HDMI (M) Fiber Optic/Copper Hybrid Cable
66ft
20m
C-FOHM/FOHM-98
HDMI (M) to HDMI (M) Fiber Optic/Copper Hybrid Cable
98ft
30m
C-FOHM/FOHM-164
HDMI (M) to HDMI (M) Fiber Optic/Copper Hybrid Cable
164ft
50m
C-FOHM/FOHM-328
HDMI (M) to HDMI (M) Fiber Optic/Copper Hybrid Cable
328ft
100m
C-HM/HM/A-C
High−Speed HDMI with Ethernet to Mini HDMI Cable
Kramer's high-speed HDMI with Ethernet to mini HDMI cable is a highperformance cable with molded HDMI connectors at both ends. The HDMI
standard supports high-definition video plus multi-channel audio in a single cable.
FEATURES
●●
Lengths - Available in versions of 0.9 to 3m (3, 6 and 10ft).
configurations:
MODEL
DESCRIPTION
LENGTH
Male - Male
C-HM/HM/A-C-3
High−Speed HDMI with Ethernet to Mini HDMI Cable
3ft
0.9m
C-HM/HM/A-C-6
High−Speed HDMI with Ethernet to Mini HDMI Cable
6ft
1.8m
C-HM/HM/A-C-10
High−Speed HDMI with Ethernet to Mini HDMI Cable
10ft
3m
www.kramerelectronics.com
INSTALLER SOLUTIONS CATALOG 2014
CABLES & CONNECTORS
45
CABLES & CONNECTORS
FEATURES
●●
C-HM/HM/A-D
High−Speed HDMI with Ethernet to Micro HDMI Cable
CABLES & CONNECTORS
Kramer's high-speed HDMI with Ethernet to micro HDMI cable is a highperformance cable with molded HDMI connectors at both ends. The HDMI
standard supports high-definition video plus multi-channel audio in a single cable.
FEATURES
●●
Lengths - Available in versions of 0.9 to 3m (3, 6 and 10ft).
configurations:
MODEL
DESCRIPTION
LENGTH
C-HM/HM/A-D-3
High−Speed HDMI with Ethernet to Micro HDMI Cable
3ft
0.9m
C-HM/HM/A-D-6
High−Speed HDMI with Ethernet to Micro HDMI Cable
6ft
1.8m
C‑HM/DM
HDMI to DVI Cable
Kramer's HDMI/DVI series are high-performance cables with HDMI connectors at
one end and a DVI connector at the other. They are designed to connect between
digital video sources and displays and recorders that don’t have both DVI and
HDMI connectors.
FEATURES
●●
Quality Construction - HDMI to DVI Single Link (18+1 pin) cable provides excellent
conductivity at high frequencies and longevity without degradation.
●●
High Quality Connectors - Gold-plated connectors resist corrosion and offer the
best possible connectivity.
●●
Varied Selection of Lengths - Available in versions of 0.9 to 15.2m (3, 6, 10, 15,
25, 35, and 50ft).
configurations:
MODEL
DESCRIPTION
LENGTH
RESOLUTION
Male - Male
C-HM/DM-3
HDMI (M) to DVI (M) Cable
3ft
0.9m
[email protected]/12
C-HM/DM-6
HDMI (M) to DVI (M) Cable
6ft
1.8m
[email protected]/12
C-HM/DM-10
HDMI (M) to DVI (M) Cable
10ft
3m
[email protected]/12
C-HM/DM-15
HDMI (M) to DVI (M) Cable
15ft
4.6m
[email protected]/12
C-HM/DM-25
HDMI (M) to DVI (M) Cable
25ft
7.6m
[email protected]/12
C-HM/DM-35
HDMI (M) to DVI (M) Cable
35ft
10.7m
[email protected]/8
C-HM/DM-50
HDMI (M) to DVI (M) Cable
50ft
15.2m
[email protected]/8
46
CABLES & CONNECTORS
INSTALLER SOLUTIONS CATALOG 2014
www.kramerelectronics.com
DVI
C‑DM/DM
DVI Copper Cable
FEATURES
●●
Quality Construction - DVI-D connection eliminates the analog conversion process
providing maximum clarity and resolution in displayed images.
●●
HDCP & Dual Link Compliant.
●●
Fiber Optic Options - Also see Kramer’s DVI-over-fiber products for transmission
distances up to 500m (1640ft).
●●
Varied Selection of Lengths - Available in versions of 0.9 to 19.8m (3, 6, 10, 15,
25, 33, 40, 50 and 65ft).
configurations:
MODEL
DESCRIPTION
LENGTH
RESOLUTION
Male - Male
C-DM/DM-1.5
DVI-D (M) to DVI-D (M) Dual Link Cable
1.5ft
0.5m
UXGA
1600x1200
C-DM/DM-3
DVI-D (M) to DVI-D (M) Dual Link Cable
3ft
0.9m
UXGA
1600x1200
C-DM/DM-6
DVI-D (M) to DVI-D (M) Dual Link Cable
6ft
1.8m
UXGA
1600x1200
C-DM/DM-10
DVI-D (M) to DVI-D (M) Dual Link Cable
10ft
3m
UXGA
1600x1200
C-DM/DM-15
DVI-D (M) to DVI-D (M) Dual Link Cable
15ft
4.6m
UXGA
1600x1200
C-DM/DM-25
DVI-D (M) to DVI-D (M) Dual Link Cable
25ft
7.6m
UXGA
1600x1200
C-DM/DM-33
DVI-D (M) to DVI-D (M) Dual Link Cable
33ft
10m
SXGA
1280x1024
C-DM/DM-40
DVI-D (M) to DVI-D (M) Dual Link Cable
40ft
12m
SXGA
1280x1024
C-DM/DM-50
DVI-D (M) to DVI-D (M) Dual Link Cable
50ft
15.2m
XGA
1024x786
NEW
C-DM/DM/xl
DVI Copper Cable
Kramer’s C-DM/DM/xl, single link DVI cable, is designed to support advanced equipment
that requires high performance cable connections. These cables are designed
to carry digital-only signals (18+1 pin) used for direct digital connections between a
source and display device such as flat panel monitors and video/data projectors.
FEATURES
●●
Quality Construction - DVI-D connection eliminates the analog conversion process
providing maximum clarity and resolution in displayed images.
●●
HDCP Compliant.
●●
High Resolution - 1920x1200 @60Hz, 1080p (12-bit) @60Hz.
●●
Fiber Optic Options - For transmission distances up to 500m (1640ft),
see Kramer’s DVI-over-fiber products.
●●
Varied Selection of Lengths - Available in versions of 0.9 to 19.8m (3, 6, 10, 15,
25, 35, 50 and 65ft).
configurations:
MODEL
DESCRIPTION
LENGTH
RESOLUTION
Male - Male
C-DM/DM/XL-3
DVI-D (M) to DVI-D (M) Cable
3ft
0.9m
UXGA
[email protected]
C-DM/DM/XL-6
DVI-D (M) to DVI-D (M) Cable
6ft
1.8m
UXGA
[email protected]
C-DM/DM/XL-10
DVI-D (M) to DVI-D (M) Cable
10ft
3m
UXGA
[email protected]
C−DM/DM/XL-15
DVI-D (M) to DVI-D (M) Cable
15ft
4.6m
UXGA
[email protected]
C-DM/DM/XL-25
DVI-D (M) to DVI-D (M) Cable
25ft
7.6m
UXGA
[email protected]
C-DM/DM/XL-35
DVI-D (M) to DVI-D (M) Cable
35ft
10.7m
UXGA
[email protected]
C-DM/DM/XL-50
DVI-D (M) to DVI-D (M) Cable
50ft
15.2m
UXGA
[email protected]
C-DM/DM/XL-65
DVI-D (M) to DVI-D (M) Cable
65ft
19.5m
UXGA
[email protected]
www.kramerelectronics.com
INSTALLER SOLUTIONS CATALOG 2014
CABLES & CONNECTORS
47
CABLES & CONNECTORS
Kramer's DVI cables are high-performance cables with molded DVI-D connectors
at both ends. These dual link cables are designed to carry digital-only signals
(24+1 pin) used for direct digital connections between a source and display device
such as flat panel monitors and video/data projectors.
C-DM/DM/FLAT(W)
DVI Flat Cable
CABLES & CONNECTORS
Kramer’s flat DVI cable is designed for “invisible” and long distance installations.
It goes through the wall, under the carpet, around corners and behind the
entertainment system with ease. The flat design of the cables renders them
unobtrusive.
FEATURES
●●
Unique Flat Configuration - Allows the DVI cables to lie flat under carpets. The white
jacket installs unobtrusively along walls.
●●
HDCP & Single Link Compliant.
●●
Varied Selection of Lengths - Available in versions of 0.9 to 15.2m (3, 6, 10, 15,
25, 35 and 50ft).
configurations:
MODEL
DESCRIPTION
LENGTH
Male - Male
C-DM/DM/FLAT(W)-3
DVI (M) to DVI (M) Flat White Cable
3ft
0.9m
C-DM/DM/FLAT(W)-6
DVI (M) to DVI (M) Flat White Cable
6ft
1.8m
C-DM/DM/FLAT(W)-10
DVI (M) to DVI (M) Flat White Cable
10ft
3m
C-DM/DM/FLAT(W)-15
DVI (M) to DVI (M) Flat White Cable
15ft
4.6m
C-DM/DM/FLAT(W)-25
DVI (M) to DVI (M) Flat White Cable
25ft
7.6m
C-DM/DM/FLAT(W)-35
DVI (M) to DVI (M) Flat White Cable
35ft
10.7m
C-DM/DM/FLAT(W)-50
DVI (M) to DVI (M) Flat White Cable
50ft
15.2m
C-FODM/FODM
Fiber Optic/DVI Hybrid Cable with Converters
Kramer’s all DVI cable system is constructed of high-performance hybrid cable
containing fiber optic and copper wires terminated with DVI-D connectors on each
end. They are designed to transmit DVI-D signals extremely long distances with
pristine digital image quality video with the copper cable carrying additional data
required for HDCP compliance.
FEATURES
Orange
Black
●●
Quality Construction - Kramer FODM cables comply with the DVI standard and
support the DDC2B mode. They are very flexible and usually do not require external
power, making them very “installer friendly”. Note: A FODM series cable is an active
electronic product which, like any other, comes with a slight chance of needing
removal or replacement in the future. Therefore, we suggest that these not be
permanently fixed into installations as might be appropriate with an ordinary cable.
If permanent installation is required, see our detachable equivalents such as the
610T/R, 602R/T, 621T/R or 622T/R.
●●
HDCP Compliant.
●●
High Resolution - Compatible with all DVI single link and HDTV standards up to
1080p and all VESA resolutions up to WUXGA (1920x1200) at 60Hz refresh rate
with 1 pixel/clock mode.
●●
Flexible Power Options - Can use either DC power from the graphic card or AC/DC
power from an external +5V adapter that plugs into the connector.
●●
Varied Selection of Lengths - Available with black or orange jackets in versions of
10, 15.2, 20, 30, 50 and 100m (33 to 328ft).
configurations:
MODEL
DESCRIPTION
LENGTH
Male - Male
C-FODM/FODM-33
DVI-D (M) to DVI-D (M) Fiber/Copper Hybrid Cable
33ft
10m
C-FODM/FODM-50
DVI-D (M) to DVI-D (M) Fiber/Copper Hybrid Cable
50ft
15.2m
C-FODM/FODM-66
DVI-D (M) to DVI-D (M) Fiber/Copper Hybrid Cable
66ft
20m
C-FODM/FODM-98
DVI-D (M) to DVI-D (M) Fiber/Copper Hybrid Cable
98ft
30m
C-FODM/FODM-164
DVI-D (M) to DVI-D (M) Fiber/Copper Hybrid Cable
164ft
50m
C-FODM/FODM-328
DVI-D (M) to DVI-D (M) Fiber/Copper Hybrid Cable
328ft
100m
48
CABLES & CONNECTORS
INSTALLER SOLUTIONS CATALOG 2014
www.kramerelectronics.com
C-AFDM/AFDM
DVI All Fiber Optic Cable with Converters
Kramer’s All Fiber DVI cable system is constructed of high-performance fiber optic
cable with DVI-D connectors on each end. It transmits DVI-D signals extremely
long distances with pristine digital image quality.
●●
Built-in Fiber Optic Converters - The C-AFDM/AFDM has converters built into DVI-D
connectors on both ends of the cable. The transmitter (connected to the source)
converts DVI signals into fiber-optic light pulses that can travel much greater
distances than traditional copper-based systems. The receiver converts the light
pulses back to DVI-D signals that connect to a display or other receiving device.
Note: A FODM series cable is an active electronic product which, like any other,
comes with a slight chance of needing removal or replacement in the future.
Therefore, we suggest that these not be permanently fixed into installations as
might be appropriate with an ordinary cable. If permanent installation is required,
see our detachable equivalents such as the 610T/R, 602R/T, 621T/R or
622T/R.
●●
HDCP Compliant.
●●
High Resolution - Compatible with all DVI single link and HDTV standards up to
1080p and all VESA resolutions up to WUXGA (1920x1200) at 60Hz refresh rate
with 1 pixel/clock mode.
●●
Zero EMI - The cable does not emit any electromagnetic interference or emission,
making it suitable for medical or other EMI sensitive environments.
●●
Flexible Power Options - The transmitter requires DC power from either the graphic
card or AC/DC power from an external +5V adapter. The receiver requires
external power (supplied).
●●
Varied Selection of Lengths - Available in ready-made assemblies of 10, 20, 30,
50 and 100m (32.8 to 328ft) or built-to-order assemblies of any length from 50
to 500m (164 to 1640ft).
configurations:
MODEL
DESCRIPTION
LENGTH
Male - Male
C-AFDM/AFDM-33
DVI (M) to DVI (M) All Fiber Optic Cable - EDID & HDCP Compatible
C-AFDM/AFDM-66
C-AFDM/AFDM-98
33ft
10m
DVI (M) to DVI (M) All Fiber Optic Cable - EDID & HDCP Compatible
66ft
20m
DVI (M) to DVI (M) All Fiber Optic Cable - EDID & HDCP Compatible
98ft
30m
C-AFDM/AFDM-164
DVI (M) to DVI (M) All Fiber Optic Cable - EDID & HDCP Compatible
164ft
50m
C-AFDM/AFDM-328
DVI (M) to DVI (M) All Fiber Optic Cable - EDID & HDCP Compatible
328ft
100m
www.kramerelectronics.com
INSTALLER SOLUTIONS CATALOG 2014
CABLES & CONNECTORS
49
CABLES & CONNECTORS
FEATURES
C-4FDM/4FDM
DVI Four Fiber Optic Cable with Converters
Kramer's C-4FDM series cables add to an impressive line of long-distance DVI
solutions. 4FDM features an extremely durable but thin cable containing only 4
strands of fiber.
CABLES & CONNECTORS
FEATURES
●●
Long-Distance DVI Solution - Uses extremely durable but thin cable containing only
4 strands of fiber for applications that do not require HDCP compliance. Note: A
FODM series cable is an active electronic product which, like any other, comes
with a slight chance of needing removal or replacement in the future. Therefore,
we suggest that these not be permanently fixed into installations as might be
appropriate with an ordinary cable. If permanent installation is required, see our
detachable equivalents such as the 610T/R, 602R/T, 621T/R or 622T/R.
●●
High Resolution - Compatible with all DVI single link and HDTV standards up to
1080p and all VESA resolutions up to WUXGA (1920x1200) at 60Hz refresh rate
with 1 pixel/clock mode.
●●
EDID Capture - Copies and stores the EDID from a display device.
●●
Power Options - The transmitter requires DC power from either the graphic card
or AC/DC power from an external +5V adapter. The receiver requires external
power (supplied).
●●
Varied Selection of Lengths - Available in versions of 10, 20, 30, 50 and 100m
(32.8 to 328ft).
configurations:
MODEL
DESCRIPTION
LENGTH
Male - Male
C-4FDM/4FDM-33
DVI (M) to DVI (M) Four Fiber Optic Cable
33ft
10m
C-4FDM/4FDM-66
DVI (M) to DVI (M) Four Fiber Optic Cable
66ft
20m
C-4FDM/4FDM-98
DVI (M) to DVI (M) Four Fiber Optic Cable
98ft
30m
C-4FDM/4FDM-164
DVI (M) to DVI (M) Four Fiber Optic Cable
164ft
50m
C-4FDM/4FDM-328
DVI (M) to DVI (M) Four Fiber Optic Cable
328ft
100m
C-MDMA/MGMA
15−pin HD to DVI & 3.5mm Stereo Audio Cable
Kramer's C-MDMA/MGMA cable is designed to connect laptop computers to
video conference systems that have a DVI input. It adapts the analog pins of DVI-A
to a 15-pin HD connector and includes an unbalanced audio cable with 3.5mm
mini jacks at each end. Also bundled is a short cable that adapts a 3.5mm mini
jack to RCA connectors.
FEATURES
●●
Quality Construction - Rugged cable with molded connectors.
●●
Compatibility - Use this adapter when you need access to the analog signal present
at a DVI-I source, or when you need to connect analog RGBHV to a display that
provides only a DVI-I input. Note that this adapter does not convert analog to digital
or digital to analog. Always verify compatibility details for the source/destination
in your application.
●●
Varied Selection of Lengths - Available in lengths of 3, 6, 10, 15, 25 and 35ft
(0.9 to 10.7m).
configurations:
MODEL
DESCRIPTION
LENGTH
Male - Male
C-MDMA/MGMA-3
DVI-I (M) to 15-pin HD (M) & 3.5mm Audio Cable
3ft
0.9m
C-MDMA/MGMA-6
DVI-I (M) to 15-pin HD (M) & 3.5mm Audio Cable
6ft
1.8m
C-MDMA/MGMA-10
DVI-I (M) to 15-pin HD (M) & 3.5mm Audio Cable
10ft
3m
C-MDMA/MGMA-15
DVI-I (M) to 15-pin HD (M) & 3.5mm Audio Cable
15ft
4.6m
C-MDMA/MGMA-25
DVI-I (M) to 15-pin HD (M) & 3.5mm Audio Cable
25ft
7.6m
C-MDMA/MGMA-35
DVI-I (M) to 15-pin HD (M) & 3.5mm Audio Cable
35ft
10.7m
50
CABLES & CONNECTORS
INSTALLER SOLUTIONS CATALOG 2014
www.kramerelectronics.com
C-DMA/5BM
DVI−A to 5 BNC Breakout Cable
Kramer’s DMA/5BM series DVI male to 5 BNC male are cables designed to
adapt between the analog pins of DVI-I and typical RGBHV. DVI video cards often
output signals in both digital and analog format and, conversely, display devices
often accept an analog RGBHV type signal using a DVI connector.
●●
Quality Construction - Rugged cable with molded connectors and gold-plated pins.
●●
Compatibility - Use this adapter when you need access to the analog signal present
at a DVI-I source, or when you need to connect analog RGBHV to a display that
provides only a DVI-I input. Note that this adapter does not convert analog to digital
or digital to analog. Always verify compatibility details for the source/destination
in your application.
●●
Varied Selection of Lengths - Available in versions of 0.9 to 4.6m (3, 6, 10 and
15ft).
configurations:
MODEL
DESCRIPTION
LENGTH
Male - Male
C-DMA/5BM-3
DVI-A (M) to 5 BNC (M) Molded Breakout Cable
3ft
0.9m
C-DMA/5BM-6
C-DMA/5BM-10
DVI-A (M) to 5 BNC (M) Molded Breakout Cable
6ft
1.8m
DVI-A (M) to 5 BNC (M) Molded Breakout Cable
10ft
C-DMA/5BM-15
3m
DVI-A (M) to 5 BNC (M) Molded Breakout Cable
15ft
4.6m
www.kramerelectronics.com
INSTALLER SOLUTIONS CATALOG 2014
CABLES & CONNECTORS
51
CABLES & CONNECTORS
FEATURES
DISPLAY PORT
C-DPM/DPM
CABLES & CONNECTORS
DisplayPort Cable
Kramer's C-DPM/DPM cable for DisplayPort helps set a new digital standard for
high-resolution video. It offers a locking connector, higher bit rates, deeper color
modes, and supports optional 128-bit encryption, stereoscopic 3D, and other
advancements over HDMI and DVI.
FEATURES
●●
Support DisplayPort 1.1.
●●
Varied Selection of Lengths - Available in versions of 0.9 to 15.0m (3, 6, 10, 15,
25, 35 and 50ft).
configurations:
MODEL
DESCRIPTION
LENGTH
Male - Male
C-DPM/DPM-3
DisplayPort (M) to DisplayPort (M) Cable
C-DPM/DPM-6
C-DPM/DPM-10
3ft
0.9m
DisplayPort (M) to DisplayPort (M) Cable
6ft
1.8m
DisplayPort (M) to DisplayPort (M) Cable
10ft
3m
C-DPM/DPM-15
DisplayPort (M) to DisplayPort (M) Cable
15ft
4.6m
C-DPM/DPM-25
DisplayPort (M) to DisplayPort (M) Cable
25ft
7.6m
C-DPM/DPM-35
DisplayPort (M) to DisplayPort (M) Cable
35ft
10.7m
C-DPM/DPM-50
DisplayPort (M) to DisplayPort (M) Cable
50ft
15.2m
C‑FODPM/FODPM
Optical Fiber/DisplayPort Hybrid Extension Cable
Kramer's C-FODPM/FODPM is a copper/fiber hybrid cable for DisplayPort
signals. The four multimode fiber cables carry the DP interface while embedded
copper wires carry the auxiliary channel, Hot Plug Detect and advanced power
management signals. The cable extends the hybrid DisplayPort signal up to 100m
(328ft).
FEATURES
●●
Quality Construction - Fire retardant PVC, enclosing 4 fiber strands and 5 shielded
copper wires.
●●
High Resolution - Up to WQXGA (2560x1600) at 60Hz vertical refresh rate or
2.7Gbps bandwidth per lane (total data rate is 10.8Gbps).
●●
Range - Extends DisplayPort up to 100m (328ft) for WQXGA (2560x1600) at a
60Hz refresh rate.
●●
Standards - Supports DP 1.1 with 36 bit color depth, fully implemented by fiberoptic communication.
●●
HDCP Compliant and HDTV Compatible.
●●
HDMI Support - Lip Sync, HDMI Uncompressed Audio Channels, Dolby TrueHD,
DTS-HD, CEC.
●●
EDID PassThru - Passes EDID signals from source to display.
●●
Zero EMI - High data security with negligible RFI/EMI emissions.
●●
Varied Selection of Lengths - Available in versions of 33 to 328ft (10, 15.2, 20,
30, 50 and 100m).
configurations:
MODEL
DESCRIPTION
LENGTH
Male - Male
C-FODPM/FODPM-33
DisplayPort (M) to DisplayPort (M) Hybrid Multi-Mode Fiber Cable
33ft
10m
C-FODPM/FODPM-50
DisplayPort (M) to DisplayPort (M) Hybrid Multi-Mode Fiber Cable
50ft
15.2m
C-FODPM/FODPM-66
DisplayPort (M) to DisplayPort (M) Hybrid Multi-Mode Fiber Cable
66ft
20m
C-FODPM/FODPM-98
DisplayPort (M) to DisplayPort (M) Hybrid Multi-Mode Fiber Cable
98ft
30m
C-FODPM/FODPM-164
DisplayPort (M) to DisplayPort (M) Hybrid Multi-Mode Fiber Cable
164ft
50m
C-FODPM/FODPM-328
DisplayPort (M) to DisplayPort (M) Hybrid Multi-Mode Fiber Cable
328ft
100m
52
CABLES & CONNECTORS
INSTALLER SOLUTIONS CATALOG 2014
www.kramerelectronics.com
C-DPM/HM
DisplayPort to HDMI Cable
DisplayPort (M) to HDMI (M) Cable.
FEATURES
Compatibility - Requires a dual-mode DisplayPort device that implements both HDMI
and DisplayPort signals. These devices are usually identified with the DP++ logo.
●●
Varied Selection of Lengths - 0.9 to 4.6m (3, 6, 10 and 15ft).
configurations:
MODEL
DESCRIPTION
LENGTH
Male - Male
C-DPM/HM-3
DisplayPort (M) to HDMI (M) Cable
3ft
0.9m
C-DPM/HM-6
DisplayPort (M) to HDMI (M) Cable
6ft
1.8m
C-DPM/HM-10
DisplayPort (M) to HDMI (M) Cable
10ft
3m
C-DPM/HM-15
DisplayPort (M) to HDMI (M) Cable
15ft
4.6m
C-MDP/HM
Mini DisplayPort to HDMI Cable
Mini DisplayPort (M) to HDMI (M) Cable
FEATURES
●●
Compatibility - Connects Mac® or other computer with Mini DisplayPort video output
to an HDMI monitor.
●●
Varied Selection of Lengths - Available in versions of 0.9 to 3.0m (3, 6 and 10ft).
configurations:
MODEL
DESCRIPTION
LENGTH
Male - Male
C-MDP/HM-3
Mini DisplayPort (M) to HDMI (M) Cable
3ft
0.9m
C-MDP/HM-6
Mini DisplayPort (M) to HDMI (M) Cable
6ft
1.8m
C-MDP/HM-10
Mini DisplayPort (M) to HDMI (M) Cable
10ft
3m
www.kramerelectronics.com
INSTALLER SOLUTIONS CATALOG 2014
CABLES & CONNECTORS
53
CABLES & CONNECTORS
●●
FIREWIRE®
C-FM4/FM4
CABLES & CONNECTORS
4−pin FireWire® Cable
Kramer’s FM4/FM4 cables are high performance cables with 4-pin FireWire®
connectors at both ends. They are used primarily for data transfer (IEEE 1394)
at speeds up to 400Mbps between multimedia devices such as digital cameras,
VCRs, CD drives, hard disks, scanners, graphic cards and editing systems.
FEATURES
●●
Quality Construction - Constructed using two separately double-shielded data cables,
in an overall double-shielded outer jacket.
●●
High Quality Connectors - Molded 4-pin connectors on both ends. The 4-pin
connector is popular on cameras and other small devices due to its compact size,
but does not support power transmission.
●●
Varied Selection of Lengths - Available in versions of 0.9 to 7.6m (3, 6, 10, 15
and 25ft).
configurations:
MODEL
DESCRIPTION
LENGTH
Male - Male
C-FM4/FM4-3
4-Pin (M) to 4-Pin (M) FireWire Cable
3ft
0.9m
C-FM4/FM4-6
4-Pin (M) to 4-Pin (M) FireWire Cable
6ft
1.8m
C-FM4/FM4-10
4-Pin (M) to 4-Pin (M) FireWire Cable
10ft
3m
C-FM4/FM4-15
4-Pin (M) to 4-Pin (M) FireWire Cable
15ft
4.6m
C-FM4/FM4-25
4-Pin (M) to 4-Pin (M) FireWire Cable
25ft
7.6m
C-FM6/FM4
6-pin to 4-pin FireWire® Cable
Kramer's FM6/FM4 cables are high-performance cables with 6-pin FireWire®
connectors at one end, and a 4-pin connector at the other. They are used
primarily for data transfer (IEEE 1394) at speeds up to 400Mbps between
multimedia devices such as digital cameras, VCRs, CD drives, hard disks,
scanners, graphic cards and editing systems.
FEATURES
●●
Quality Construction - Constructed using two separately double-shielded data cables,
in an overall double-shielded outer jacket.
●●
High-Quality Connectors - Has a molded 4-pin connector on one end, and a molded
6-pin connector on the other. The 4-pin connector is popular on cameras and
other small devices due to its compact size, but PC’s and other larger devices
often use the 6-pin.
●●
Varied Selection of Lengths - Available in versions of 0.9 to 7.6m (3, 6, 10, 15
and 25ft).
configurations:
MODEL
DESCRIPTION
LENGTH
Male - Male
C-FM6/FM4-3
6-Pin (M) to 4-Pin (M) FireWire Cable
3ft
0.9m
C-FM6/FM4-6
6-Pin (M) to 4-Pin (M) FireWire Cable
6ft
1.8m
C-FM6/FM4-10
6-Pin (M) to 4-Pin (M) FireWire Cable
10ft
3m
C-FM6/FM4-15
6-Pin (M) to 4-Pin (M) FireWire Cable
15ft
4.6m
C-FM6/FM4-25
6-Pin (M) to 4-Pin (M) FireWire Cable
25ft
7.6m
54
CABLES & CONNECTORS
INSTALLER SOLUTIONS CATALOG 2014
www.kramerelectronics.com
C-FM6/FM6
6−pin FireWire® Cable
Kramer's FM6/FM6 cables are high-performance cables with 6-pin FireWire®
connectors at both ends. They are used primarily for data transfer (IEEE 1394)
at speeds up to 400Mbps between multimedia devices such as digital cameras,
VCRs, CD drives, hard disks, scanners, graphic cards and editing systems.
●●
Quality Construction - Constructed using two separately double-shielded data cables
and a 22AWG pair for power transmission, all in an overall double-shielded outer
jacket.
●●
High-Quality Connectors - Has molded 6-pin connectors on both ends. The 6-pin
connector is popular on larger devices like computers because it offers full support
of high speed data transmission, and the ability to power a device downstream.
●●
Varied Selection of Lengths - Available in versions of 0.9 to 7.6m (3, 6, 10, 15
and 25ft).
configurations:
MODEL
DESCRIPTION
LENGTH
Male - Male
C-FM6/FM6-3
6-Pin (M) to 6-Pin (M) FireWire Cable
3ft
0.9m
C-FM6/FM6-6
6-Pin (M) to 6-Pin (M) FireWire Cable
6ft
1.8m
C-FM6/FM6-10
6-Pin (M) to 6-Pin (M) FireWire Cable
10ft
3m
C-FM6/FM6-15
6-Pin (M) to 6-Pin (M) FireWire Cable
15ft
4.6m
C-FM6/FM6-25
6-Pin (M) to 6-Pin (M) FireWire Cable
25ft
7.6m
C-FM9/FM9
9−pin FireWire® Cable
Kramer's FM9/FM9 cables are high-performance cables with 9-pin FireWire®
connectors at both ends. They are used primarily for data transfer (IEEE 1394)
at speeds up to 800Mbps between multimedia devices such as digital cameras,
VCRs, CD drives, hard disks, scanners, graphic cards and editing systems.
FEATURES
●●
Quality Construction - Constructed using two separately double-shielded data cables
and a 26AWG pair for power transmission, all in an overall double-shielded outer
jacket.
●●
High-Quality Connectors - Has molded 9-pin connectors on both ends. The 9-pin
connector is popular on larger devices like computers because it offers full support
of high speed data transmission, and the ability to power a device downstream.
●●
Varied Selection of Lengths - Available in versions of 0.9 to 7.6m (3, 6, 10, 15
and 25ft).
configurations:
MODEL
DESCRIPTION
LENGTH
Male - Male
C-FM9/FM9-3
9-Pin (M) to 9-Pin (M) FireWire Cable
3ft
0.9m
C-FM9/FM9-6
9-Pin (M) to 9-Pin (M) FireWire Cable
6ft
1.8m
C-FM9/FM9-10
9-Pin (M) to 9-Pin (M) FireWire Cable
10ft
3m
C-FM9/FM9-15
9-Pin (M) to 9-Pin (M) FireWire Cable
15ft
4.6m
C-FM9/FM9-25
9-Pin (M) to 9-Pin (M) FireWire Cable
25ft
7.6m
www.kramerelectronics.com
INSTALLER SOLUTIONS CATALOG 2014
CABLES & CONNECTORS
55
CABLES & CONNECTORS
FEATURES
LC FIBER OPTIC
C-2LC/2LC
CABLES & CONNECTORS
2 LC Fiber Optic Cable
Kramer’s 2LC fiber optic cables are constructed of 2 individual color coded
multi-mode 50/125um simplex cables of diameter 2.0mm each, contained
in a round orange jacket. They are companions to various Kramer detachable
transmitter/receiver sets.
FEATURES
●●
Quality Construction - Multimode optical fiber with operating wavelength: 850nm.
Sub-cables are color coded: yellow and white and are terminated with the popular
LC connectors for easy installation and are shipped with dust caps at the ends.
●●
Numerous Applications - Use these cables to connect our FireWire® Fiber Optic
Repeater 648 and the 602R/T transmitter/receiver.
●●
Varied Selection of Lengths - Available in versions of 10, 20, 30 and 50m (33 to
164ft).
configurations:
MODEL
DESCRIPTION
LENGTH
Male - Male
C-2LC/2LC-33
2 LC (M)to 2 LC (M) Fiber Optic Cable
33ft
10m
C-2LC/2LC-66
2 LC (M)to 2 LC (M) Fiber Optic Cable
66ft
20m
C-2LC/2LC-99
2 LC (M)to 2 LC (M) Fiber Optic Cable
99ft
30m
C-2LC/2LC-164
2 LC (M)to 2 LC (M) Fiber Optic Cable
164ft
50m
C-4LC/4LC
4 LC Fiber Optic Cable
Kramer’s 4LC fiber optic cables are constructed of four color coded multi-mode
50/125um simplex cables of 2.0mm (0.079in) diameter each, contained in a
round overall orange jacket. They are intended primarily as companion to various
Kramer detachable transmitter/receiver sets.
FEATURES
●●
Quality Construction - Multimode optical fiber with an operating wavelength of
850nm. Sub-cables are color coded: red, green, blue and orange, terminated
with the popular LC connectors for easy installation and are shipped with dust
caps at the ends.
●●
Numerous Applications - Use these cables to connect our optical transmitter and
receivers for DVI and HDMI, such as: 610T/R, 621T/R and 631T/R.
●●
Varied Selection of Lengths - Available in versions of 10, 20, 30, 50, 60, 100,
200, 300 and 500m (33 to 1640ft).
configurations:
MODEL
DESCRIPTION
LENGTH
Male - Male
C-4LC/4LC-33
4 LC (M) to 4 LC (M) Fiber Optic Cable
33ft
10m
C-4LC/4LC-66
4 LC (M) to 4 LC (M) Fiber Optic Cable
66ft
20m
C-4LC/4LC-99
4 LC (M) to 4 LC (M) Fiber Optic Cable
99ft
30m
C-4LC/4LC-164
4 LC (M) to 4 LC (M) Fiber Optic Cable
164ft
50m
C-4LC/4LC-200
4 LC (M) to 4 LC (M) Fiber Optic Cable
200ft
60m
C-4LC/4LC-328
4 LC (M) to 4 LC (M) Fiber Optic Cable
328ft
100m
C-4LC/4LC-656
4 LC (M) to 4 LC (M) Fiber Optic Cable
656ft
200m
C-4LC/4LC-984
4 LC (M) to 4 LC (M) Fiber Optic Cable
984ft
300m
C-4LC/4LC-1640
4 LC (M) to 4 LC (M) Fiber Optic Cable
1640ft
500m
56
CABLES & CONNECTORS
INSTALLER SOLUTIONS CATALOG 2014
www.kramerelectronics.com
SC FIBER OPTIC
C-SC/SC/OM3
OM3 Multi-Mode Fiber Optic Cable
Kramer's SC/SC/OM3 series is an OM3 fiber optic multi-mode 50/125um cable
in a transparent PVC jacket terminated with SC connectors.
●●
Quality Construction - Developed for 10Gbps standards. 850nm OM3 multi-mode
fiber in a flexible transparent PVC outer jacket of 0.9mm (0.035in) diameter.
●●
Numerous Applications - Connects Kramer's 670T/R, 671T/R, and 673T/R
transmitter/receivers for long-distance transmission of high-resolution digital video
signals over fiber.
●●
Varied Selection of Lengths - Available in versions of 10, 20, 30, 50, 75 and 100m
(33 to 328ft).
configurations:
MODEL
DESCRIPTION
LENGTH
Male - Male
C-SC/SC/OM3-33
SC (M) to SC (M) Transparent Fiber Cable
33ft
10m
C-SC/SC/OM3-66
SC (M) to SC (M) Transparent Fiber Cable
66ft
20m
C-SC/SC/OM3-98
SC (M) to SC (M) Transparent Fiber Cable
98ft
30m
C-SC/SC/OM3-164
SC (M) to SC (M) Transparent Fiber Cable
164ft
50m
C-SC/SC/OM3-246
SC (M) to SC (M) Transparent Fiber Cable
246ft
75m
C-SC/SC/OM3-328
SC (M) to SC (M) Transparent Fiber Cable
328ft
100m
www.kramerelectronics.com
INSTALLER SOLUTIONS CATALOG 2014
CABLES & CONNECTORS
57
CABLES & CONNECTORS
FEATURES
AUDIO ASSEMBLIES
3.5mm
C-A35M/A35M
CABLES & CONNECTORS
3.5mm Stereo Audio Cable
Kramer’s A35M series mini audio cables are constructed from high-quality
shielded pair style cable terminated with molded male 3.5mm stereo connectors
on both ends.
FEATURES
●●
Quality Construction - Constructed from flexible, high-quality 28AWG cable for
transparent performance with line level audio signals.
●●
Numerous Applications - Ideal for use with typical computer sound cards,
projectors, portable music players, etc. Also great for serial or IR remote control
that often uses shielded pair wire for transmission of transmit, receive, and ground
signals.
●●
Varied Selection of Lengths - Available in versions of 0.9 to 15.2m (3, 6, 10, 12,
15, 25, 35 and 50ft).
configurations:
MODEL
DESCRIPTION
LENGTH
Male - Male
C-A35M/A35M-3
3.5mm (M) to 3.5mm (M) Stereo Audio Cable
3ft
0.9m
C-A35M/A35M-6
3.5mm (M) to 3.5mm (M) Stereo Audio Cable
6ft
1.8m
C-A35M/A35M-10
3.5mm (M) to 3.5mm (M) Stereo Audio Cable
10ft
3m
C-A35M/A35M-12
3.5mm (M) to 3.5mm (M) Stereo Audio Cable
12ft
3.7m
C-A35M/A35M-15
3.5mm (M) to 3.5mm (M) Stereo Audio Cable
15ft
4.6m
C-A35M/A35M-25
3.5mm (M) to 3.5mm (M) Stereo Audio Cable
25ft
7.6m
C-A35M/A35M-35
3.5mm (M) to 3.5mm (M) Stereo Audio Cable
35ft
10.7m
C-A35M/A35M-50
3.5mm (M) to 3.5mm (M) Stereo Audio Cable
50ft
15.2m
C-A35M/A35F
3.5mm IR or Mono Audio Extension Cable
Kramer’s A35M/A35F cable is constructed of a two conductor cable with a male
3.5mm connector at one end and a female 3.5mm connector at the other. It is
an outstanding solution for extending the cable length of infrared emitters and
sensors.
FEATURES
●●
Quality Construction - Molded mono 3.5mm (1/8in), male and female connectors.
●●
Available Lengths - Available in versions of 15.2 and 18.3m (50 and 60ft).
configurations:
MODEL
DESCRIPTION
LENGTH
Male - Female
C-A35M/A35F-50
3.5mm (M) to 3.5mm (F) IR Extension Cable - Mono Connector
50ft
15.2m
C-A35M/A35F-60
3.5mm (M) to 3.5mm (F) IR Extension Cable - Mono Connector
60ft
18.3m
58
CABLES & CONNECTORS
INSTALLER SOLUTIONS CATALOG 2014
www.kramerelectronics.com
C-AS35M/AS35F
3.5mm IR or Stereo Audio Extension Cable
Kramer’s AS35M/AS35F cables constructed of three conductor cable with
a male 3.5mm connector at one end and a female 3.5mm connector at the
other. They are an outstanding solution for extending the cable length of infrared
emitters and sensors.
●●
Quality Construction - Molded stereo 3.5mm (1/8in), male and female connectors.
●●
Length - Available in 50ft (15.2m) length.
configurations:
MODEL
DESCRIPTION
LENGTH
Male - Female
C-AS35M/AS35F-50
3.5mm (M) to 3.5mm (F) IR Extension Cable - Stereo Connector
50ft
15.2m
C-A35M/2RAM & C-A35F/2RAM
3.5mm to 2 RCA Breakout Cable
Kramer’s A35M/2RAM and A35F/2RAM series cables are simple adapters
that have a stereo 3.5mm connector at one end, and two male RCA connectors
at the other. They provide passive conversion between 3.5mm and dual RCA
connectors, most often adapting a PC sound card or MP3 player to the audio
inputs of a sound system or display device.
FEATURES
Female ‑ Male ●●
Quality Construction - Dual molded male RCAs on one end and molded 3.5mm on
the other.
●●
High-Quality Connectors - RCA connectors are color coded red, white to match
audio connectors on typical equipment.
●●
Varied Selection of Lengths - Available in versions of 0.3 to 15.2m (1, 6, 10, 15,
25, 35 and 50ft).
Male ‑ Male
configurations:
MODEL
DESCRIPTION
LENGTH
Female - Male
C-A35F/2RAM-1
3.5mm (F) to 2 RCA (M) Breakout Cable
1ft
0.3m
1.8m
Male - Male
C-A35M/2RAM-6
3.5mm (M) to 2 RCA (M) Breakout Cable
6ft
C-A35M/2RAM-10
3.5mm (M) to 2 RCA (M) Breakout Cable
10ft
3m
C-A35M/2RAM-15
3.5mm (M) to 2 RCA (M) Breakout Cable
15ft
4.6m
C-A35M/2RAM-25
3.5mm (M) to 2 RCA (M) Breakout Cable
25ft
7.6m
C-A35M/2RAM-35
3.5mm (M) to 2 RCA (M) Breakout Cable
35ft
10.7m
C-A35M/2RAM-50
3.5mm (M) to 2 RCA (M) Breakout Cable
50ft
15.2m
www.kramerelectronics.com
INSTALLER SOLUTIONS CATALOG 2014
CABLES & CONNECTORS
59
CABLES & CONNECTORS
FEATURES
RCA
C-2RAM/2RAM
CABLES & CONNECTORS
RCA Stereo Audio Cable
Kramer’s 2RAM series are high quality dual RCA cable assemblies designed
for stereo audio signals. They are perfect for audio connection of DVD players,
VCRs, and other consumer style devices that are routinely used in professional
AV systems.
FEATURES
●●
Quality Construction - Constructed using 2 coaxial conductors for L/R audio signals
terminated with male RCA connectors on both ends.
●●
Precision Connectors - Gold-plated RCA connectors are featured for the best
possible signal transmission without corrosion.
●●
Easy to Use - Connectors are molded and color-coded red and white to match audio
connectors found on most consumer style equipment.
●●
Varied Selection of Lengths - Available in versions of 0.3 to 15.2m (1, 2, 3, 6, 10,
12, 15, 25, 35 and 50ft).­
configurations:
MODEL
DESCRIPTION
LENGTH
Male - Male
C-2RAM/2RAM-1
2 RCA (M) to 2 RCA (M) Molded Audio Cable
1ft
C-2RAM/2RAM-2
2 RCA (M) to 2 RCA (M) Molded Audio Cable
2ft
0.6m
C-2RAM/2RAM-3
2 RCA (M) to 2 RCA (M) Molded Audio Cable
3ft
0.9m
C-2RAM/2RAM-6
2 RCA (M) to 2 RCA (M) Molded Audio Cable
6ft
1.8m
C-2RAM/2RAM-10
2 RCA (M) to 2 RCA (M) Molded Audio Cable
10ft
3m
C-2RAM/2RAM-12
2 RCA (M) to 2 RCA (M) Molded Audio Cable
12ft
3.7m
C-2RAM/2RAM-15
2 RCA (M) to 2 RCA (M) Molded Audio Cable
15ft
4.6m
C-2RAM/2RAM-25
2 RCA (M) to 2 RCA (M) Molded Audio Cable
25ft
7.6m
C-2RAM/2RAM-35
2 RCA (M) to 2 RCA (M) Molded Audio Cable
35ft
10.7m
C-2RAM/2RAM-50
2 RCA (M) to 2 RCA (M) Molded Audio Cable
50ft
15.2m
60
CABLES & CONNECTORS
INSTALLER SOLUTIONS CATALOG 2014
0.3m
www.kramerelectronics.com
XLR
C-XLQM/XLQF
XLR Quad Cable
fEATURES
●●
Quality Construction - The four-conductor quad style arrangement cancels
electromagnetically induced noise from fluorescent lighting ballasts and AC power
transformers.
●●
Super Flexibility - Large numbers of thin bare copper wire strands in both the
conductors and shield produce a highly flexible cable.
●●
Special XLPE Insulation - Excellent electrical characteristics and no shrink-back during
soldering. Hand-soldered premium XLR connectors.
●●
Varied Selection of Lengths - Available in versions of 0.3 to 45.7m (1, 1.5, 3, 6,
10, 15, 25, 35, 50, 75, 100, 125 and 150ft).
configurations:
MODEL
DESCRIPTION
LENGTH
Male - Female
C-XLQM/XLQF-1
XLR (M) to XLR (F) Quad Style Cable
1ft
C-XLQM/XLQF-1.5
XLR (M) to XLR (F) Quad Style Cable
1.5ft
0.5m
C-XLQM/XLQF-3
XLR (M) to XLR (F) Quad Style Cable
3ft
0.9m
C-XLQM/XLQF-6
XLR (M) to XLR (F) Quad Style Cable
6ft
1.8m
C-XLQM/XLQF-10
XLR (M) to XLR (F) Quad Style Cable
10ft
3m
C-XLQM/XLQF-15
XLR (M) to XLR (F) Quad Style Cable
15ft
4.6m
C-XLQM/XLQF-25
XLR (M) to XLR (F) Quad Style Cable
25ft
7.6m
C-XLQM/XLQF-35
XLR (M) to XLR (F) Quad Style Cable
35ft
10.7m
C-XLQM/XLQF-50
XLR (M) to XLR (F) Quad Style Cable
50ft
15.2m
C-XLQM/XLQF-75
XLR (M) to XLR (F) Quad Style Cable
75ft
22.9m
C-XLQM/XLQF-100
XLR (M) to XLR (F) Quad Style Cable
100ft
30.5m
C-XLQM/XLQF-125
XLR (M) to XLR (F) Quad Style Cable
125ft
38.1m
C-XLQM/XLQF-150
XLR (M) to XLR (F) Quad Style Cable
150ft
45.7m
www.kramerelectronics.com
INSTALLER SOLUTIONS CATALOG 2014
CABLES & CONNECTORS
0.3m
61
CABLES & CONNECTORS
Kramer’s XLQ cables are quad style professional-grade mic or line level audio
cables. 4-core star quad cables with mutually offsetting twisting technology
can reduce induction noise levels to 10% of that in regular two-pair balanced
microphone cable.
CONTROL ASSEMBLIES
9-Pin D (RS-232)
C-A35M/D9F
CABLES & CONNECTORS
9-pin D-sub to 3.5mm Adapter Cable
Kramer's C-A35M/D9F is an adapter cable for converting RS-232 on a 3.5mm
stereo plug (M) to a 9-pin D (F) connector.
fEATURES
●●
Quality Construction - Data cable with a molded 3.5mm stereo plug at one end and
a 9-pin D-sub female at the other.
●●
Length - Available in a 1.8m (6ft) length.
configurations:
MODEL
DESCRIPTION
LENGTH
Male - Female
3.5mm (M) to 9-pin D-sub (M)
C-A35M/D9F-6
6ft
1.8m
IR Emitter
C-A35M/IRE
3.5mm to Single IR Emitter Cable
Kramer’s C-A35/IRE is an infrared emitter permanently mounted on a 3m (10ft)
cable.
fEATURES
●●
Application - Use the C-A35M/IRE with any remote control system that offers a
port for transmission of IR control information via hard wire to an IR controllable
device. The 3m (10ft) cable is terminated with a 3.5mm mini connector that can
be removed if needed. The transparent emitter adheres to the IR receiving device
with double-sided tape.
●●
Kramer Control System - Use this IR emitter with Kramer RC series remote control
panels and VP-23RC presentation switcher.
●●
Length - Available in a 3m (10ft) version.
configurations:
MODEL
DESCRIPTION
LENGTH
Male
3.5mm (M) to 1 IR Emitter Cable
C-A35M/IRE-10
10ft
3m
C-A35M/2IRE
3.5mm to Dual IR Emitter Cable
Kramer’s C-A35/2IRE is a dual infrared emitter permanently mounted on a 3m
(10ft) cable.
FEATURES
●●
Application - Use the C-A35M/2IRE with any remote control system that has a
port for transmitting IR control information via hard wire. The 3m (10ft) cable is
terminated with a 3.5mm mini connector that can be removed if needed. The
transparent emitters adhere to the IR receiving device with double-sided tape.
●●
Kramer Control System - Use this IR emitter with Kramer RC series remote control
panels.
●●
Length - Available in a 3m (10ft) version.
configurations:
MODEL
DESCRIPTION
LENGTH
Male
C-A35M/2IRE-10
62
3.5mm (M) to 2 IR Emitter Cable
CABLES & CONNECTORS
INSTALLER SOLUTIONS CATALOG 2014
10ft
3m
www.kramerelectronics.com
IR Receiver
C-A35M/IRR
3.5mm to IR Receiver Cable
FEATURES
●●
Quality Construction - The compact IR receiver module is mounted to a 15.2m
(50ft) cable terminated with a molded 3.5mm connector.
●●
Available Lengths - Available in versions of 0.9 and 15.2m (3 and 50ft).
configurations:
MODEL
DESCRIPTION
LENGTH
Male
C-A35M/IRR-3
3.5mm (M) to IR Receiver Cable
3ft
0.9m
C-A35M/IRR-50
3.5mm (M) to IR Receiver Cable
50ft
15.2m
C-IRR/HDR4F-KIT
IR Receiver Cable Kit
Kramer's IR Receiver Cable Kit is an internal cable that connects between the
IR on-board circuit and an external IR receiver. Once connected, the Kramer
machine can be controlled from a distance using the included 15m (50ft) IR
Receiver cable. This distance can be further extended up to 60m (200ft) by using
four Kramer C-AS35M/AS35F-50 stereo cables of 15m each (50ft).
FEATURES
●●
Connector Types - 3.5mm mini jack and 4-pin connector.
●●
Extends IR Control to Up to 60m (200ft).
●●
Length - Available in a 50ft (15.2m) version.
configurations:
MODEL
DESCRIPTION
C-IRR/HDR4F-KIT
IR Receiver Cable Kit
www.kramerelectronics.com
INSTALLER SOLUTIONS CATALOG 2014
LENGTH
50ft
CABLES & CONNECTORS
15.2m
63
CABLES & CONNECTORS
Kramer's C-A35M/IRR is an IR receiver cable designed as a companion to a
Kramer infrared repeater such as the PT-4iREX that has an external remote IR
receiver input.
TWISTED PAIR CABLES
RJ-45 (CAT 5)
C-DGK6/DGK6
CABLES & CONNECTORS
Four−Pair U/FTP Data Cable (23AWG)
Kramer's C-DGK6/DGK6 shielded twisted pair (U/FTP) data cable assembly
is made from Kramer's BC-DGKat623 bulk cable. It is the ideal companion to
Kramer's twisted pair digital transmitter-receiver sets and provide optimum range
and performance.
FEATURES
●●
Quality Construction - 4 shielded twisted pairs (U/FTP) of 23AWG solid copper
conductors are cabled together in an unshielded outer jacket.
●●
Optimized for Kramer Hardware - Use with any of Kramer’s wide range of twisted
pair digital transmitter-receiver sets.
●●
RJ-45 Connector - Shielded.
7configurations:
MODEL
DESCRIPTION
LENGTH
Male - Male
C-DGK6/DGK6-6
RJ-45 (M) to RJ-45(M) Four−Pair U/FTP Data Cable − 23 AWG
6ft
C-DGK6/DGK6-10
RJ-45 (M) to RJ-45(M) Four−Pair U/FTP Data Cable − 23 AWG
10ft
3m
C-DGK6/DGK6-15
RJ-45 (M) to RJ-45(M) Four−Pair U/FTP Data Cable − 23 AWG
15ft
4.6m
C-DGK6/DGK6-25
RJ-45 (M) to RJ-45(M) Four−Pair U/FTP Data Cable − 23 AWG
25ft
7.6m
C-DGK6/DGK6-35
RJ-45 (M) to RJ-45(M) Four−Pair U/FTP Data Cable − 23 AWG
35ft
10.7m
C-DGK6/DGK6-50
RJ-45 (M) to RJ-45(M) Four−Pair U/FTP Data Cable − 23 AWG
50ft
15.2m
C-DGK6/DGK6-75
RJ-45 (M) to RJ-45(M) Four−Pair U/FTP Data Cable − 23 AWG
75ft
22.9m
C-DGK6/DGK6-100
RJ-45 (M) to RJ-45(M) Four−Pair U/FTP Data Cable − 23 AWG
100ft
15.2m
C-DGK6/DGK6-125
RJ-45 (M) to RJ-45(M) Four−Pair U/FTP Data Cable − 23 AWG
125ft
38.1m
C-DGK6/DGK6-150
RJ-45 (M) to RJ-45(M) Four−Pair U/FTP Data Cable − 23 AWG
150ft
45.7m
C-DGK6/DGK6-200
RJ-45 (M) to RJ-45(M) Four−Pair U/FTP Data Cable − 23 AWG
200ft
60m
64
CABLES & CONNECTORS
INSTALLER SOLUTIONS CATALOG 2014
1.8m
www.kramerelectronics.com
PLENUM CABLES
BULK CABLES
VIDEO CABLES
BCP-5X-SOLID
outer jacket
ripcord
coaxial
component
binder
Kramer’s BCP-5X-SOLID is a plenum rated high resolution 5-coax cable typically
used for routing RGBHV signals in professional AV systems. It is optimized for use
with a new generation of one piece compression connectors. It offers the best
possible precision and ease of use in the field when working with BNCs and RCAs.
In addition, the solid center conductor is ideal for connecting directly to equipment
with terminal blocks.
FEATURES
●●
Plenum Rated - The low smoke and fire resistant properties of plenum rated cable
allow it to reside in air return spaces of ceilings, floors, and walls, often saving the
cost of installing conduit.
●●
Quality Construction - Each mini coax is a precision system consisting of a solid
25AWG center conductor and foamed FEP dielectric surrounded by aluminum Mylar
foil and tinned copper spiral shields. A white stripe in the jacket makes it easy to
distinguish from its stranded counterpart.
●●
Numerous Applications - The most common application is routing RGBHV signals
in pro AV systems but BCP-5X-SOLID also offers excellent performance with any
combination of component or composite video, and/or unbalanced audio.
●●
New Generation One-Piece Connectors - For quickest assembly use Kramer linear
compression and stripper coax tools.
●●
Varied Selection of Length - Available in reels of 76/152/304m (250/500/1000ft).
CABLES & CONNECTORS
5 Mini Coax High−Resolution Solid Core Bulk Plenum Cable
Specifications:
CONSTRUCTION
Coax Center Conductor:
Dielectric:
Shield:
Coax Jacket Colors:
Outer Jacket:
Outer Jacket Color:
25AWG solid bare copper.
Foamed FEP.
(A) 38AWG tinned copper 90% spiral.
(B) Aluminum Mylar foil 25% overlap rate.
Red, green, blue, yellow, black.
XPbP lead−free plenum PVC.
Black with white stripe extruded into jacket opposite
side from the print legend.
DIAMETERS
0.457mm (0.018in).
Center Conductor:
1.88mm (0.074in).
Dielectric:
Individual Coax Outer Jacket: 2.7mm (0.106in) nominal.
8mm (0.315in) nominal.
Outside Diameter:
Individual Coax Outer Jacket: 2.7mm (0.106in) nominal.
8mm (0.315in) nominal.
Outside Diameter:
ELECTRICAL
REGULATORY
UL:
RoHS:
75Ω nominal.
105Ω/km (32Ω/1000ft) at 20ºC.
16pF/ft nominal.
1.2ns/ft nominal.
−5.1dB @100MHz
−7.1dB @200MHz
−10.5dB @400MHz
−17.9dB @1000MHz.
CMP per Article 800 NEC; CL2P per Article 725 NEC.
In compliance with European directive 2002/95/IEC.
Issue 13.2.2003.
Keep plenum cables at room temperature for 24
hours before use.
Note:
configurations:
www.kramerelectronics.com
Model
Description
BCP-5X-SOLID-250
5 Mini-Coax Solid Core 25 AWG Plenum Cable
250ft
76.2m
BCP-5X-SOLID-500
5 Mini-Coax Solid Core 25 AWG Plenum Cable
500ft
152.4m
BCP-5X-SOLID-1000
5 Mini-Coax Solid Core 25 AWG Plenum Cable
1000ft
304.8m
INSTALLER SOLUTIONS CATALOG 2014
LENGTH
CABLES & CONNECTORS
65
PLENUM CABLES
Impedance:
DC Resistance:
Capacitance:
Time Delay:
Attenuation (dB/100ft):
AUDIO/CONTROL CABLES
BCP-1T
Balanced Mono Audio or Control Bulk Plenum Cable 24 AWG drain wire
CABLES & CONNECTORS
shield foil
22 AWG component
outer jacket
Kramer’s BCP-1T is a high-quality, plenum rated, shielded pair style cable that
routes balanced mono or unbalanced stereo audio signals in professional AV
systems. It is also ideal for any application where a low capacitance 22AWG
shielded pair is appropriate including control panels for Sierra Video matrix
switchers.
FEATURES
●●
Plenum Rated - The low smoke and fire-resistant properties of plenum rated cable
allow it to reside in air return spaces of ceiling, floors, and walls, often saving the
cost of installing conduit. The drain wire is in continuous contact with the aluminum
Mylar foil.
●●
Easy Stripping - Exceptionally easy to strip because the foil shield is bonded to the
inside of the jacket.
●●
Varied Selection of
(250/500/1000ft).
Lengths
-
Available
in
reels
of
76/152/304m
Specifications:
ELECTRICAL
DC Resistance:
Mutual Capacitance:
Voltage:
Temperature:
48.6Ω/km (14.8Ω/1000ft).
15.5pF/ft.
300V RMS.
0° to 75°C (32° to 167°F).
SHIELDED PAIR
Conductors:
Insulation:
22AWG, 7/30 tinned copper.
Insulation Colors:
Diameter:
Diameter with Insulation:
Drain Wire:
Red, black.
Plenum rated PVC insulation 0.23mm (0.009in)
nominal thickness, 2 conductors in 2−in lay length,
1 twist per every 5cm (2in).
Shield:
0.071mm (0.003in).
1.24mm (0.049in).
24AWG 7/32 tinned copper (in contact with foil
shield), diameter 0.71 mm (0.028in).
Aluminum Mylar foil 25% overlap rate.
OVERALL
Outer Jacket:
Outer Jacket Color:
Outer Jacket Diameter:
Lead−free plenum rated PVC.
Black with white lettering.
3.30mm (0.130in).
REGULATORY
UL:
CSA:
RoHS:
CL2P.
CMP, FT6.
In compliance with European directive 2002/95/IEC,
issue 13.2.2003.
For best results, keep plenum cable at room
temperature for 24 hours before use.
PLENUM CABLES
Note:
configurations:
Model
Description
LENGTH
BCP-1T-250
1 Shielded Pair + Drain Wire Mono/Serial Plenum Bulk Cable
250ft
76.2m
BCP-1T-500
1 Shielded Pair + Drain Wire Mono/Serial Plenum Bulk Cable
500ft
152.4m
BCP-1T-1000 1 Shielded Pair + Drain Wire Mono/Serial Plenum Bulk Cable 1000ft 304.8m
66
CABLES & CONNECTORS
INSTALLER SOLUTIONS CATALOG 2014
www.kramerelectronics.com
BCP-2T
Dual Shielded Pair Bulk Plenum Cable
jacket
center
conductor
drain wire
FEATURES
●●
Quality Construction - BCP-2T is a durable and flexible plenum rated bulk cable
manufactured to CL-3P and CMP standards per National Electric Code articles
725 and 800, and it is RoHS compliant.
●●
Precision Engineered - The extremely slim and flexible structure is ideal when high
performance is required even in tight quarters. Each pair has its own shield and
drain wire, and the two systems are electrically isolated from one another.
●●
Numerous Applications - Perfect for balanced or unbalanced line level and
microphone audio signals, as well as many serial or IR control requirements
including K-NET™ cables in Kramer Summit View systems.
●●
Easy to Use - The main conductors are color-coded red/black and green/white.
Sequential numbering by foot is printed on the jacket for easy calculation of length.
●●
Varied Selection of Lengths - Available in pull-boxes of 76/152/304m
(250/500/1000ft).
CABLES & CONNECTORS
Al Mylar foil
Kramer BCP-2T is a plenum rated bulk cable designed for high-performance
transmission of audio and control signals in a wide range of professional and
residential AV applications. BCP-2T is slim, flexible, and contains two 22AWG
shielded pairs, each with its own shield and drain wire.
Specifications:
CONSTRUCTION
Conductor:
Insulation:
Jacket Insulation Colors:
Rip Cord:
Jacket:
Outer Jacket Color:
4−stranded 22AWG (7/0.0096) tinned copper
conductors.
9 mils minimum average of plenum rated PVC.
Red, black & white, green.
Nylon rip cord under the jacket.
15 mils of plenum rated PVC.
Dark gray.
DIAMETERS
Center Conductor:
Insulation:
Outside Diameter:
0.64mm (0.025in).
1.244mm (0.049in).
3.93mm (0.155in).
ELECTRICAL
Conductor DCR:
Capacitance:
50.5Ω/km (15.4Ω/1000ft) @20°C (68°F).
Conductor to conductor: 52pF/ft nominal; conductor
to conductor connected to shield: 97pF/ft.
42Ω.
Impedance:
Shield DCR:
78.7Ω/km (24Ω/1000ft).
REGULATORY
UL:
C(UL):
NEC:
RoHS:
CL3P.
CMP.
In accordance with article 725 and 800.
Pair Shield:
configurations:
www.kramerelectronics.com
Model
Description
BCP-2T-250
2 Shielded Pair + Drain Wire Stereo/Serial
Plenum Bulk Cable
250ft
76.2m
BCP-2T-500
2 Shielded Pair + Drain Wire Stereo/Serial
Plenum Bulk Cable
500ft
152.4m
BCP-2T-1000
2 Shielded Pair + Drain Wire Stereo/Serial
Plenum Bulk Cable
1000ft
304.8m
INSTALLER SOLUTIONS CATALOG 2014
LENGTH
CABLES & CONNECTORS
67
PLENUM CABLES
In compliance with European directive 2002/95/IEC,
issue 13.2.2003.
Foil free aluminum/polyester tape (for shield
isolation) helically applied with foil side facing inward.
TWISTED PAIR CABLES
BCP-DGKat724
Four−Pair S/FTP Data Bulk Plenum Cable
Kramer's BCP-DGKat724 is a plenum rated shielded twisted pair (S/FTP) cable,
the ideal companion to Kramer's twisted pair digital transmitter-receiver sets for
optimum range and performance.
CABLES & CONNECTORS
jacket
center
conductor
insulator
FEATURES
●●
Quality Construction - 4 twisted pairs of 24AWG solid copper conductors are cabled
together and shielded with a polyester-aluminum tape and outer jacket.
●●
Optimized for Kramer Hardware - Use with any of Kramer’s wide range of twisted
pair digital transmitter-receiver sets. Terminate with shielded RJ-45 connectors.
●●
Varied Selection of Length - Available in pull boxes of 152/305m (500/1000ft).
Specifications:
CONSTRUCTION
Conductor Size:
Outer Jacket Color:
Outer Jacket:
24AWG bare solid copper.
Black.
Ripcord: for easy jacket stripping
Polyvinyl chloride 0.20 wall thickness.
Total Wires:
4 shielded twisted pairs.
Braided Shield:
Conductor Color Code:
Blue/white, brown/white, green/white,
orange/white.
ELECTRICAL
Impedance:
Max. Conductor Resistance:
Maximum Resistance Unbalanced:
Pair to Pair Skew:
Capacitance (Cond-Cond):
100Ω +/−10%.
27Ω/1000ft.
5%.
12ns/100m max.
40pF/m nominal.
REGULATORY
UL Listing:
RoHS Compliant:
CMP.
In compliance with European directive
2002/95/IEC, issue 13.2.2003.
configurations:
Description
BCP-DGKat724-500
Plenum Rated Four-Pair STP Data Cable - 24 AWG 500ft
LENGTH
152.4m
BCP-DGKat724-1000
Plenum Rated Four-Pair STP Data Cable - 24 AWG 1000ft
304.8m
PLENUM CABLES
Model
68
CABLES & CONNECTORS
INSTALLER SOLUTIONS CATALOG 2014
www.kramerelectronics.com
CABLE ASSEMBLIES
VIDEO ASSEMBLIES
15-Pin HD
CP-GM/GM/xl
Kramer's new xl generation of CP-GM/GM cables offers the highest possible
performance and a new configuration designed to give installers and users a new
level of convenience and aesthetics. They are ideal for any application requiring
no-compromise quality and performance in a plenum rated VGA cable.
FEATURES
●●
Plenum Rating - CP versions of Kramer VGA cables are constructed from CL2P
and CMP rated cables.
●●
Newly Updated - Slim connectors with shallow depth profile are top priority in
this new generation. At the same time aesthetics are even nicer than before,
using elegant molded connectors at one end where it is typically connected to a
projector. At the other end an extra shallow 45º VGA connector with removable
metal shells is used to provide all possible options for installation in tight quarters.
●●
Cable Specs - For detailed specs, see Kramer BCP-6X2T bulk cable. Full support
of DDC and pin 9.
●●
Quality Construction - Hybrid construction using molded and back shell connectors
is unique to Kramer.
●●
Flexible Applications - RGBHV signals are all assigned to coaxes so it is easy to cut
and convert one end to 5 BNC in the field if needed.
●●
Companion Wall Plates - Use Kramer wall plates like WP-209.
●●
Varied Selection of Lengths - Available in versions of 0.9 to 45.7m (3, 6, 10, 15,
25, 35, 50, 75, 100, 125 and 150ft).
CABLES & CONNECTORS
15−pin HD Plenum Cable with a 45° Side−Angled Connector
configurations:
MODEL
DESCRIPTION
LENGTH
Male - Male
CP-GM/GM/XL-3
15-pin HD (M) to 15-pin HD (M) Molded (Straight) to Backshell (45°)
3ft
0.9m
CP-GM/GM/XL-6
15-pin HD (M) to 15-pin HD (M) Molded (Straight) to Backshell (45°)
6ft
1.8m
CP-GM/GM/XL-10
15-pin HD (M) to 15-pin HD (M) Molded (Straight) to Backshell (45°)
10ft
3m
CP-GM/GM/XL-15
15-pin HD (M) to 15-pin HD (M) Molded (Straight) to Backshell (45°)
15ft
4.6m
CP-GM/GM/XL-25
15-pin HD (M) to 15-pin HD (M) Molded (Straight) to Backshell (45°)
25ft
7.6m
CP-GM/GM/XL-35
15-pin HD (M) to 15-pin HD (M) Molded (Straight) to Backshell (45°)
35ft
10.7m
CP-GM/GM/XL-50
15-pin HD (M) to 15-pin HD (M) Molded (Straight) to Backshell (45°)
50ft
15.2m
CP-GM/GM/XL-75
15-pin HD (M) to 15-pin HD (M) Molded (Straight) to Backshell (45°)
75ft
22.9m
CP-GM/GM/XL-100
15-pin HD (M) to 15-pin HD (M) Molded (Straight) to Backshell (45°)
100ft
30.5m
CP-GM/GM/XL-125
15-pin HD (M) to 15-pin HD (M) Molded (Straight) to Backshell (45°)
125ft
38.1m
CP-GM/GM/XL-150
15-pin HD (M) to 15-pin HD (M) Molded (Straight) to Backshell (45°)
150ft
45.7m
PLENUM CABLES
www.kramerelectronics.com
INSTALLER SOLUTIONS CATALOG 2014
CABLES & CONNECTORS
69
CP-GMA/GMA/xl
15−pin HD & 3.5mm Audio Plenum Cable with a 45° Side−Angled Connector
CABLES & CONNECTORS
Kramer's new xl generation of CP-GMA/GMA cables offers the highest possible
performance and a new configuration designed to give installers and users a new
level of convenience and aesthetics. They are ideal for any application requiring
no-compromise quality and performance in a plenum rated VGA plus audio cable.
FEATURES
●●
Plenum Rating - CP versions of Kramer VGA cables are constructed from CL2P
and CMP rated cables.
●●
Newly Updated - Slim connectors with shallow depth profile are top priority in this
new generation. At the same time aesthetics are even nicer than before, using
elegant molded connectors at one end where it is typically connected to a projector.
At the other end an extra shallow 45º VGA connector with removable metal shells
is used to provide all possible options for installation in tight quarters.
●●
Cable Specs - For detailed specs, see Kramer BCP-6X2T bulk cable. Full support
of DDC & pin 9.
●●
Quality Construction - Hybrid construction using molded and back shell connectors
is unique to Kramer. The 3.5mm audio pigtails are 20cm (8in) at one end, and
61cm (24in) at the other.
●●
Flexible Applications - RGBHV signals are all assigned to coaxes so it’s easy to
cut and convert one end to 5 BNC in the field if needed. The audio travels on an
independent shielded pair.
●●
Companion Wall Plates - Use Kramer wall plates like a simple modular system
consisting of FRAME-1G and WXA-2P.
●●
Varied Selection of Lengths - Available in versions of 0.9 to 45.7m (3, 6, 10, 15,
25, 35, 50, 75, 100, 125 and 150ft).
configurations:
MODEL
DESCRIPTION
LENGTH
Male - Male
15-pin HD (M-M) & 3.5mm Molded (Straight) to Backshell (45°)
3ft
0.9m
CP-GMA/GMA/XL-6
15-pin HD (M-M) & 3.5mm Molded (Straight) to Backshell (45°)
6ft
1.8m
CP-GMA/GMA/XL-10
15-pin HD (M-M) & 3.5mm Molded (Straight) to Backshell (45°)
10ft
3m
CP-GMA/GMA/XL-15
15-pin HD (M-M) & 3.5mm Molded (Straight) to Backshell (45°)
15ft
4.6m
CP-GMA/GMA/XL-25
15-pin HD (M-M) & 3.5mm Molded (Straight) to Backshell (45°)
25ft
7.6m
CP-GMA/GMA/XL-35
15-pin HD (M-M) & 3.5mm Molded (Straight) to Backshell (45°)
35ft
10.7m
CP-GMA/GMA/XL-50
15-pin HD (M-M) & 3.5mm Molded (Straight) to Backshell (45°)
50ft
15.2m
CP-GMA/GMA/XL-75
15-pin HD (M-M) & 3.5mm Molded (Straight) to Backshell (45°)
75ft
22.9m
CP-GMA/GMA/XL-100
15-pin HD (M-M) & 3.5mm Molded (Straight) to Backshell (45°)
100ft
30.5m
CP-GMA/GMA/XL-125
15-pin HD (M-M) & 3.5mm Molded (Straight) to Backshell (45°)
125ft
38.1m
CP-GMA/GMA/XL-150
15-pin HD (M-M) & 3.5mm Molded (Straight) to Backshell (45°)
150ft
45.7m
PLENUM CABLES
CP-GMA/GMA/XL-3
70
CABLES & CONNECTORS
INSTALLER SOLUTIONS CATALOG 2014
www.kramerelectronics.com
CP-GM
15−pin HD to Bare End Installation Plenum Cable
Kramer's CP-GM series are premium quality single-ended cables constructed of
plenum rated multi-conductor cable. They have a metal backshell style 15-pin HD
connector at one end and no termination at the other for easier pulling through
walls, floors, etc.
●●
●●
●●
●●
Plenum Rated - The low smoke and fire-resistant properties of plenum rated cable
allow it to reside in air return spaces of ceiling, floors, and walls, often saving the
cost of installing conduit.
Cable Specs - See Kramer BCP-6X2T bulk cable for detailed specs.
Quality Construction - Constructed from flexible, high quality plenum rated cable
containing 6 mini coaxes and 2 shielded pairs. Designed to pass extra pins for full
support of ID bit and other advanced communication functions if desired.
Numerous Applications - Ideal for routing typical computer video signals in
professional AV systems.
Varied Selection of Lengths - Available in lengths of 15, 25, 35, 50, 75, 100, 125
and 150ft (4.6 to 45.7m).
configurations:
MODEL
DESCRIPTION
LENGTH
Male - Bare End
CP-GM-15
15-pin HD (M) to Bare End Installation Plenum Cable
15ft
CP-GM-25
15-pin HD (M) to Bare End Installation Plenum Cable
25ft
7.6m
CP-GM-35
15-pin HD (M) to Bare End Installation Plenum Cable
35ft
10.7m
CP-GM-50
15-pin HD (M) to Bare End Installation Plenum Cable
50ft
15.2m
CP-GM-75
15-pin HD (M) to Bare End Installation Plenum Cable
75ft
22.9m
CP-GM-100
15-pin HD (M) to Bare End Installation Plenum Cable
100ft
30.5m
CP-GM-125
15-pin HD (M) to Bare End Installation Plenum Cable
125ft
38.1m
CP-GM-150
15-pin HD (M) to Bare End Installation Plenum Cable
150ft
45.7m
CABLES & CONNECTORS
FEATURES
●●
4.6m
CP-GM-XX-5BMKIT
15−pin HD to 5 BNC Breakout Plenum Cable Kit
Kramer’s plenum breakout kits contain everything needed to build an attractive
and high-quality 15-pin HD to 5 BNC breakout cable in the field.
FEATURES
●●
●●
●●
●●
configurations:
MODEL
DESCRIPTION
LENGTH
Male - Male
CP-GM-10-5BMKIT
15-pin HD (M) to 5 BNC (M) Plenum Breakout Cable Kit
10ft
3m
CP-GM-15-5BMKIT
15-pin HD (M) to 5 BNC (M) Plenum Breakout Cable Kit
15ft
4.6m
CP-GM-25-5BMKIT
15-pin HD (M) to 5 BNC (M) Plenum Breakout Cable Kit
25ft
7.6m
CP-GM-35-5BMKIT
15-pin HD (M) to 5 BNC (M) Plenum Breakout Cable Kit
35ft
10.7m
CP-GM-50-5BMKIT
15-pin HD (M) to 5 BNC (M) Plenum Breakout Cable Kit
50ft
15.2m
CP-GM-75-5BMKIT
15-pin HD (M) to 5 BNC (M) Plenum Breakout Cable Kit
75ft
22.9m
CP-GM-100-5BMKIT
15-pin HD (M) to 5 BNC (M) Plenum Breakout Cable Kit
100ft
30.5m
CP-GM-125-5BMKIT
15-pin HD (M) to 5 BNC (M) Plenum Breakout Cable Kit
125ft
38.1m
CP-GM-150-5BMKIT
15-pin HD (M) to 5 BNC (M) Plenum Breakout Cable Kit
150ft
45.7m
www.kramerelectronics.com
INSTALLER SOLUTIONS CATALOG 2014
CABLES & CONNECTORS
71
PLENUM CABLES
●●
Plenum Rating - The single-ended cable in any CP-GM-XX-5BMKIT is CL2P and CMP
rated. It is constructed from Kramer BCP-5X cable that contains 5 high-resolution
mini coaxes.
Convenient Bundling - Simplifies ordering and speeds up installation by bundling the
right components into a single part number and package.
Kit Contents - The kit contains a single-ended plenum VGA cable, five 75Ω crimp
style male BNC connectors, color coded heat shrink for strain relief, a larger piece
of heat shrink for the breakout point, and clear instructions.
Easy Installation - Pull the single-ended cable into position so that the attractive
molded 15-pin HD connector remains in the desired location, then prepare the bare
end and install the crimp connectors using industry standard procedures and tools.
Varied Selection of Lengths - Available in versions of 3.0 to 45.7m (10, 15, 25,
35, 50, 75, 100, 125 and 150ft).
CP-MH1/MH1/xl
15−pin HD, 3.5mm Stereo Audio & 3 RCA Hydra™ Multi−Head Plenum Cable
CABLES & CONNECTORS
Kramer's new xl generation of Hydra CP-MH1/MH1 multi-headed cables offers
the highest possible performance and the features most requested by installers
and users. The Hydra MH1 configuration is ideal for any application requiring
a cost-effective one piece cable solution for the signals most often found in AV
equipped rooms today.
FEATURES
●●
Quality Construction - Hybrid construction using molded and back shell connectors
is unique to Kramer.
●●
Plenum Rating - CP versions of Multi-Head are constructed from CL2P and CMP
rated cable containing six high-resolution mini coaxes and 2 shielded pairs.
●●
Newly Updated - Slim connectors with shallow depth profile are top priority in the
new XL generation. At the same time, aesthetics are even nicer than before, using
elegant molded connectors at one end where it is typically connected to a projector,
and an extra shallow 45º VGA connector with removable metal shells is used at the
other end to provide all possible options for installation in tight quarters.
●●
Flexible Applications - Use the 15-pin HD, 3.5mm stereo, and 3 RCAs for any
combination of VGA, video and audio signals. The mini connector may also support
remote control in some cases. The RCAs are typically used for composite video
and L/R audio, but can be used for analog component video.
●●
Companion Wall Plate - Designed as the perfect fit with the WAV-5 wall plate.
●●
Cable Specs - For detailed specs, see Kramer BCP-6X2T bulk cable. Note that the
15-pin HD portion only passes RGBHV so there is no ID/DDC support.
●●
Varied Selection of Lengths - Available in versions of 1.8 to 45.7m (6, 10, 15, 25,
35, 50, 75, 100, 125 and 150ft).
configurations:
MODEL
DESCRIPTION
LENGTH
Male - Male
CP-MH1/MH1/XL-6
15-pin HD, 3.5mm Audio & 3 RCA Molded (Straight) to Backshell (45°)
6ft
1.8m
CP-MH1/MH1/XL-10
15-pin HD, 3.5mm Audio & 3 RCA Molded (Straight) to Backshell (45°)
10ft
3m
CP-MH1/MH1/XL-15
15-pin HD, 3.5mm Audio & 3 RCA Molded (Straight) to Backshell (45°)
15ft
4.6m
CP-MH1/MH1/XL-25
15-pin HD, 3.5mm Audio & 3 RCA Molded (Straight) to Backshell (45°)
25ft
7.6m
15-pin HD, 3.5mm Audio & 3 RCA Molded (Straight) to Backshell (45°)
35ft
10.7m
15-pin HD, 3.5mm Audio & 3 RCA Molded (Straight) to Backshell (45°)
50ft
15.2m
CP-MH1/MH1/XL-75
15-pin HD, 3.5mm Audio & 3 RCA Molded (Straight) to Backshell (45°)
75ft
22.9m
CP-MH1/MH1/XL-100
15-pin HD, 3.5mm Audio & 3 RCA Molded (Straight) to Backshell (45°)
100ft
30.5m
CP-MH1/MH1/XL-125
15-pin HD, 3.5mm Audio & 3 RCA Molded (Straight) to Backshell (45°)
125ft
38.1m
CP-MH1/MH1/XL-150
15-pin HD, 3.5mm Audio & 3 RCA Molded (Straight) to Backshell (45°)
150ft
45.7m
PLENUM CABLES
CP-MH1/MH1/XL-35
CP-MH1/MH1/XL-50
72
CABLES & CONNECTORS
INSTALLER SOLUTIONS CATALOG 2014
www.kramerelectronics.com
RCA
CP-3RVAM/3RVAM
3 RCA AV Plenum Cable
FEATURES
●●
●●
●●
●●
●●
Plenum Rated - The low smoke and fire-resistant properties of plenum rated cable
allow it to reside in air return spaces of ceilings, floors, and walls, often saving the
cost of installing conduit.
Quality Construction - Constructed from flexible, high-quality plenum rated cable
containing mini coaxes. Gold-plated contacts for corrosion resistance, long life,
and precise connections.
Cable Specs - See Kramer BCP-5X bulk cable for detailed specs.
Applications - Ideal for routing typical composite video and dual RCA stereo audio
signals in professional AV systems.
Varied Selection of Lengths - Available in 10, 15, 25, 35, 50, 75, 100, 125 and
150ft versions (3 to 45.7m).
configurations:
MODEL
DESCRIPTION
LENGTH
CABLES & CONNECTORS
Kramer's plenum rated video/audio cables are constructed of mini coax cable
terminated with three molded male RCA connectors at each end. They offer
outstanding durability and high-performance for any video/audio signal application
where a plenum rating is required.
Male - Male
CP-3RVAM/3RVAM-10
3 RCA (M) to 3 RCA (M) Audio & Video Plenum Cable
10ft
3m
CP-3RVAM/3RVAM-15
3 RCA (M) to 3 RCA (M) Audio & Video Plenum Cable
15ft
4.6m
CP-3RVAM/3RVAM-25
3 RCA (M) to 3 RCA (M) Audio & Video Plenum Cable
25ft
7.6m
CP-3RVAM/3RVAM-35
3 RCA (M) to 3 RCA (M) Audio & Video Plenum Cable
35ft
10.7m
CP-3RVAM/3RVAM-50
3 RCA (M) to 3 RCA (M) Audio & Video Plenum Cable
50ft
15.2m
CP-3RVAM/3RVAM-75
3 RCA (M) to 3 RCA (M) Audio & Video Plenum Cable
75ft
22.9m
CP-3RVAM/3RVAM-100
3 RCA (M) to 3 RCA (M) Audio & Video Plenum Cable
100ft
30.5m
CP-3RVAM/3RVAM-125
3 RCA (M) to 3 RCA (M) Audio & Video Plenum Cable
125ft
38.1m
CP-3RVAM/3RVAM-150
3 RCA (M) to 3 RCA (M) Audio & Video Plenum Cable
150ft
45.7m
HDMI
NEW
CP-HM/HM/ETH
HDMI Plenum Cable with Ethernet
Kramer's HDMI plenum rated cables are high-performance cables with molded
HDMI connectors at both ends. HDMI standard supports high-definition video plus
multi-channel audio in a single cable.
FEATURES
Plenum Rated - The low smoke and fire-resistant properties of plenum rated cable
allow it to reside in air return spaces of ceiling, floors, and walls, often saving the
cost of installing conduit.
●●
Quality Construction - 24AWG, High Definition Multimedia Interface (HDMI) cables
provide an uncompressed digital link for digital audio and high definition signals
between electronic source equipment such as DVD players, set-top boxes and
computers and high-definition televisions and large screen displays.
●●
High-Quality Connectors - Gold-plated connectors resist corrosion, and provide the
best possible connectivity.
●●
Varied Selection of Lengths - Available in versions of 4.6 to 15.2m (15, 25, 35, 50ft).
configurations:
MODEL
DESCRIPTION
LENGTH
RESOLUTION
Male - Male
CP-HM/HM/ETH-15
HDMI (M) to HDMI (M) Plenum Rated Cable with Ethernet
15ft
4.6m
4Kx2K
CP-HM/HM/ETH-25
HDMI (M) to HDMI (M) Plenum Rated Cable with Ethernet
25ft
7.6m
1080p @60Hz/12
CP-HM/HM/ETH-35
HDMI (M) to HDMI (M) Plenum Rated Cable with Ethernet
35ft
10.7m
1080p @60Hz/12
CP-HM/HM/ETH-50
HDMI (M) to HDMI (M) Plenum Rated Cable with Ethernet
50ft
15.2m
1080p @60Hz/12
www.kramerelectronics.com
INSTALLER SOLUTIONS CATALOG 2014
CABLES & CONNECTORS
73
PLENUM CABLES
●●
AUDIO ASSEMBLIES
3.5mm
CP-A35M/A35M
CABLES & CONNECTORS
3.5mm Audio Plenum Cable
Kramer’s CP-A35M/A35M series mini stereo audio cables are premium quality
plenum rated cables constructed of shielded pair style cable terminated with
precision male tip-ring-sleeve style 3.5mm connectors at each end. They offer
outstanding durability and high performance for any stereo unbalanced audio
signal application where a plenum rating is required.
FEATURES
●●
Plenum Rated - The low smoke and fire-resistant properties of plenum rated cable
allow it to reside in air return spaces of ceilings, floors, and walls, often saving the
cost of installing conduit.
●●
Quality Construction - Constructed from flexible, high-quality plenum rated 22AWG
shielded pair style cable.
●●
Cable Specs - For detailed specs, see Kramer BCP-1T bulk cable.
●●
Varied Selection of Lengths - Available inversions of 3 to 45.7m (10, 15, 25, 35,
50, 75, 100, 125 and 150ft).
configurations:
MODEL
DESCRIPTION
LENGTH
Male - Male
3.5m (M) to 3.5mm (M) Stereo Audio Plenum Cable
10ft
3m
CP-A35M/A35M-15
CP-A35M/A35M-25
3.5m (M) to 3.5mm (M) Stereo Audio Plenum Cable
15ft
4.6m
3.5m (M) to 3.5mm (M) Stereo Audio Plenum Cable
25ft
7.6m
CP-A35M/A35M-35
3.5m (M) to 3.5mm (M) Stereo Audio Plenum Cable
35ft
10.7m
CP-A35M/A35M-50
3.5m (M) to 3.5mm (M) Stereo Audio Plenum Cable
50ft
15.2m
CP-A35M/A35M-75
3.5m (M) to 3.5mm (M) Stereo Audio Plenum Cable
75ft
22.9m
CP-A35M/A35M-100
3.5m (M) to 3.5mm (M) Stereo Audio Plenum Cable
100ft
30.5m
CP-A35M/A35M-125
3.5m (M) to 3.5mm (M) Stereo Audio Plenum Cable
125ft
38.1m
CP-A35M/A35M-150
3.5m (M) to 3.5mm (M) Stereo Audio Plenum Cable
150ft
45.7m
PLENUM CABLES
CP-A35M/A35M-10
74
CABLES & CONNECTORS
INSTALLER SOLUTIONS CATALOG 2014
www.kramerelectronics.com
RCA
CP‑2RAM/2RAM
2 RCA Stereo Audio Plenum Cable
FEATURES
●●
●●
●●
●●
●●
Quality Construction - Constructed from flexible, high-quality plenum rated cable
containing 2 mini coaxes. Gold-plated contacts for corrosion resistance, long life,
and precise connections.
Plenum Rated - The low smoke and fire-resistant properties of plenum rated cable
allow it to reside in air return spaces of ceilings, floors, and walls, often saving the
cost of installing conduit.
Applications - Ideal for routing unbalanced audio signals in professional AV systems.
Cable Specs - For detailed specs, see Kramer BCP-2X bulk cable.
Varied Selection of Lengths - Available in versions of 3 to 45.7m (10, 15, 25, 35,
50, 75, 100, 125 and 150ft).
configurations:
MODEL
DESCRIPTION
LENGTH
CABLES & CONNECTORS
Kramer’s CP-2RAM/2RAM series dual RCA audio cables are premium quality
plenum rated cables constructed of dual mini coax cable terminated with two
molded male RCA connectors at each end. They offer outstanding durability and
high-performance for any stereo unbalanced audio signal application where a
plenum rating is required.
Male - Male
CP-2RAM/2RAM-10
2 RCA (M) to 2 RCA (M) Stereo Audio Plenum Cable
10ft
3m
CP-2RAM/2RAM-15
2 RCA (M) to 2 RCA (M) Stereo Audio Plenum Cable
15ft
4.6m
CP-2RAM/2RAM-25
2 RCA (M) to 2 RCA (M) Stereo Audio Plenum Cable
25ft
7.6m
CP-2RAM/2RAM-35
2 RCA (M) to 2 RCA (M) Stereo Audio Plenum Cable
35ft
10.7m
CP-2RAM/2RAM-50
2 RCA (M) to 2 RCA (M) Stereo Audio Plenum Cable
50ft
15.2m
CP-2RAM/2RAM-75
2 RCA (M) to 2 RCA (M) Stereo Audio Plenum Cable
75ft
22.9m
CP-2RAM/2RAM-100
2 RCA (M) to 2 RCA (M) Stereo Audio Plenum Cable
100ft
30.5m
CP-2RAM/2RAM-125
2 RCA (M) to 2 RCA (M) Stereo Audio Plenum Cable
125ft
38.1m
CP-2RAM/2RAM-150
2 RCA (M) to 2 RCA (M) Stereo Audio Plenum Cable
150ft
45.7m
TWISTED PAIR ASSEMBLIES
RJ-45
CP-DGK6/DGK6
Pre−Terminated Ultra−Low Skew UTP (Unshielded Twisted Pair) Plenum Cable
Kramer's CP-DGK6/DGK6 is a plenum rated shielded twisted pair (S/FTP) cable,
the ideal companion to Kramer's twisted pair digital transmitter-receiver sets for
optimum range and performance.
FEATURES
Connectors - Shielded RJ-45 (M).
System Range - 295ft (720p/1080i @60Hz) & 230ft (1080p @60Hz).
●● Varied Selection of Lengths - Available in versions of 7.6 to 61m (25, 35, 50, 75,
100, 125, 150 & 200ft).
●●
configurations:
MODEL
DESCRIPTION
LENGTH
Male - Male
CP-DGK6/DGK6-25
RJ-45 (M) to RJ-45 (M) Plenum Rated DGKat Shielded Twisted Pair Cable for Digital Signals
25ft
7.6m
CP-DGK6/DGK6-35
RJ-45 (M) to RJ-45 (M) Plenum Rated DGKat Shielded Twisted Pair Cable for Digital Signals
35ft
10.7m
CP-DGK6/DGK6-50
RJ-45 (M) to RJ-45 (M) Plenum Rated DGKat Shielded Twisted Pair Cable for Digital Signals
50ft
15.2m
CP-DGK6/DGK6-75
RJ-45 (M) to RJ-45 (M) Plenum Rated DGKat Shielded Twisted Pair Cable for Digital Signals
75ft
22.9m
CP-DGK6/DGK6-100
RJ-45 (M) to RJ-45 (M) Plenum Rated DGKat Shielded Twisted Pair Cable for Digital Signals
100ft
30.5m
CP-DGK6/DGK6-125
RJ-45 (M) to RJ-45 (M) Plenum Rated DGKat Shielded Twisted Pair Cable for Digital Signals
125ft
38.1m
CP-DGK6/DGK6-150
RJ-45 (M) to RJ-45 (M) Plenum Rated DGKat Shielded Twisted Pair Cable for Digital Signals
150ft
45.7m
CP-DGK6/DGK6-200
RJ-45 (M) to RJ-45 (M) Plenum Rated DGKat Shielded Twisted Pair Cable for Digital Signals
200ft
60m
www.kramerelectronics.com
INSTALLER SOLUTIONS CATALOG 2014
CABLES & CONNECTORS
75
PLENUM CABLES
●●
LOW SMOKE & HALOGEN FREE
BULK CABLES
CABLES & CONNECTORS
BC-1T/LSHF
Mono Audio/Control Bulk Cable − Low Smoke & Halogen Free
Kramer’s BC-1T/LSHF is a high-quality low-smoke, halogen free shielded pair
cable designed for routing balanced mono or unbalanced stereo mic or line level
audio signals in commercial or residential AV systems.
jacket
center
conductor
drain wire
FEATURES
aluminum
Mylar foil
●●
Quality Construction - Conductors and drain wire are stranded 20AWG tinned
copper.
●●
Rugged and Flexible Jacket - With internal rip cord and sequential markings every
meter.
●●
Easy Stripping - Exceptionally easy to strip because the foil shield is bonded to the
inside of the jacket.
●●
Length - Available in reels of 300m (985ft).
Specifications:
CONSTRUCTION
Conductors:
Insulation:
Drain Wire:
Shield:
Outer Jacket Color:
Outer Jacket:
20AWG, (10/30) tinned copper conductors.
Polypropylene color coded: red, black.
20AWG (10/30) tinned copper (in contact with shield).
Aluminum Mylar foil with 25% overlapping.
Dark gray with blue lettering.
LSHF.
DIAMETERS
Conductor:
PVC Insulation:
0.916mm (0.036in).
0.44mm (0.017in) nominal thickness, 1.8mm (0.071in)
diameter.
5.4mm (0.213in).
Outer Jacket:
ELECTRICAL
Impedance:
DC Resistance:
Mutual Capacitance
Conductor-Conductor:
Mutual Capacitance
Connected to Shield:
Temperature:
40 to 100Ω.
34.6Ω/km (10.5Ω/1000ft).
89pF/m (27pF/ft).
161pF/m (49pF/ft).
−20° to 75°C (−4 to 167°F).
REGULATORY
UL:
CSA:
RoHS:
CL2.
C(UL) FT4.
In compliance with European directive 2002/95/IEC.
configurations:
76
CABLES & CONNECTORS
MODEL
DESCRIPTION
BC-1T/LSHF
Mono Audio/Control Cable - Low Smoke &
Halogen Free
INSTALLER SOLUTIONS CATALOG 2014
LENGTH
985ft
300m
www.kramerelectronics.com
NEW
BC-1X/LSHF(22AWG)-300M
1 Coax RG−59 Super High−Resolution Bulk Cable (22AWG) − Low Smoke & Halogen Free
jacket
conductor
Kramer’s BC-1X(22AWG) is a super high-resolution low-smoke, halogen free
RG-59 coaxial cable perfect for long distance composite and 3G HD-SDI runs that
require precision performance with analog or digital video signals.
FEATURES
aluminum
Mylar foil
●●
Quality Construction - 22AWG solid center conductor and dual-shield design
consisting of aluminum braid and dual aluminum Mylar foil. Rugged and flexible
with low attenuation. Tested to 3G.
braid
●●
Universal Compatibility - Compatible with Kramer’s compression connectors as well
as typical crimp systems.
●●
Length - Available in reels of 300m (985ft).
Specifications:
CONSTRUCTION
Coax Center Conductor:
Dielectric:
Shield:
22AWG solid bare copper.
Foam PE.
(A) 61% braid tinned solid copper.
(B) Dual aluminum Mylar foil 25% overlap rate.
Outside Jacket:
Outside Jacket Color:
PVC.
Green with black lettering.
DIAMETERS
Center Conductor:
Dielectric:
Outside Diameter:
0.643mm (0.0253in).
2.8mm (0.11in).
4.5mm (0.177in).
ELECTRICAL
Impedance:
DC Resistance:
Capacitance:
Velocity of Propagation:
Temperature:
Attenuation (dB/100ft):
75Ω.
17.6Ω/km (5.4Ω/1000ft).
53.1pF/m (16.5pF/ft).
81.3%
−20° to 75°C (−4° to 167°F).
−0.3dB @1MHz
−0.8dB @5MHz
−1.6dB @25MHz
−2.7dB @80MHz
−4.8dB @270MHz
−7.0dB @540MHz
−9.6dB @1000MHz
−18.2dB @3000MHz.
REGULATORY
DIN & EU Equivalent:
EN 50265−1:1998
EN 50265−2−1:1998
EN 50267−2−1:1998
EN 50267−2−2:1998.
configurations:
www.kramerelectronics.com
MODEL
DESCRIPTION
BC-1X(22AWG)-300M
RG−59 Super High−Resolution Bulk
Cable (22AWG)
INSTALLER SOLUTIONS CATALOG 2014
LENGTH
CABLES & CONNECTORS
985ft
300m
77
CABLES & CONNECTORS
insulation
BC-2S/LSHF
Speaker Bulk Cable − Low Smoke & Halogen Free
Kramer’s BC-2S/LSHF is a high-quality low-smoke, halogen free twisted pair cable
designed for connecting speakers and amplifiers in commercial or residential AV
systems.
jacket
CABLES & CONNECTORS
center
conductor
insulator
FEATURES
●●
Quality Construction - Rugged and flexible jacket with sequential markings every
meter.
●●
High Performance - Use anywhere an unshielded stranded 16AWG pair is suitable.
●●
Length - Available in reels of 300m (985ft).
Specifications:
CONSTRUCTION
Conductors:
Insulation:
Outer Jacket Color:
Outer Jacket:
16AWG, (26/30) bare copper.
Polypropylene color coded: red, black.
Light gray with blue lettering.
LSHF
DIAMETERS
Center Conductor:
PVC Insulation:
Outer Jacket:
1.478mm (0.058in).
2.0mm (0.079in).
5.2mm (0.205in).
ELECTRICAL
DC Resistance:
Temperature:
13.7Ω/km (4.17Ω/1000ft).
−20° to 75°C (−4° to 167°F).
REGULATORY
UL:
CSA:
RoHS:
CM.
CM, FT4.
In compliance with European directive 2002/95/IEC.
configurations:
78
CABLES & CONNECTORS
MODEL
DESCRIPTION
BC-2S/LSHF
Speaker Cable - Low Smoke & Halogen Free
INSTALLER SOLUTIONS CATALOG 2014
LENGTH
985ft
300m
www.kramerelectronics.com
BC‑5X/LSHF
5 Mini Coax High−Resolution Bulk Cable − Low Smoke & Halogen Free
Kramer’s BC-5X/LSHF is a high-resolution low-smoke, halogen free 75Ω 5-mini
coaxial cable perfect for routing RGBHV signals in commercial or residential AV
systems.
center
conductor
●●
Quality Construction - Each coax has a 28AWG center conductor and copper braid
shield. Coax jackets are color-coded red, green, blue, yellow, black. Rugged and
flexible jacket with internal rip cord and sequential markings every meter.
insulator
●●
Universal Compatibility - Compatible with Kramer’s compression connectors as well
as typical crimp systems.
●●
Length - Available in reels of 328ft (100m).
filler
shield
ripcord
jacket
Specifications:
CONSTRUCTION
Coax Center Conductor:
Dielectric:
Shield:
Coax Jacket Colors:
Outer Jacket:
Outer Jacket Color:
28AWG 7/36 tinned copper.
Foam polyethylene.
38AWG tinned copper 90% braid.
Red, green, blue, yellow, black.
LSHF.
Dark gray with white lettering.
DIAMETERS
Center Conductor:
Dielectric:
Individual Coax:
Outside Diameter:
0.38mm (0.015in).
1.6mm (0.063in).
2.75mm (0.108in).
9.2mm (0.362in).
ELECTRICAL
Impedance:
DC Resistance:
Capacitance:
Velocity of Propagation:
Attenuation (dB/100ft):
75Ω.
237Ω/km (72.2Ω/1000ft).
60pF/m (18.3pF/ft).
78%.
−0.6dB @1MHz
−1.4dB @5MHz
−2.1dB @10MHz
−4.7dB @50MHz
−6.8dB @100MHz
−9.2dB @180MHz
−14.2dB @400MHz
−20.1dB @750MHz
Temperature:
−23.8dB @1000MHz.
−20° to 75°C (−4° to 167°F).
REGULATORY
UL:
CSA:
CL2.
C(UL) CL2.
configurations:
www.kramerelectronics.com
MODEL
DESCRIPTION
BC-5X/LSHF-100
5 Mini Coax High-Resolution Cable - Low
Smoke & Halogen Free
INSTALLER SOLUTIONS CATALOG 2014
LENGTH
CABLES & CONNECTORS
328ft
100m
79
CABLES & CONNECTORS
FEATURES
BC-CAT5E/LSHF
CAT 5e UTP (Unshielded Twisted Pair) Bulk Cable − Low Smoke & Halogen Free
Kramer's BC-CAT5E/LSHF is a low-smoke, halogen-free unshielded twisted pair
(UTP) CAT 5e cable for computer/LAN use.
jacket
center
conductor
CABLES & CONNECTORS
FEATURES
insulator
●●
Quality Construction - Durable and flexible bulk cable. 4 pairs of 24AWG solid bare
copper.
●●
Length - Available in pull boxes of 300m (985ft).
Specifications:
CONSTRUCTION
Center Conductor:
Jacket Colors:
24AWG, solid bare copper.
Brown, brown/white, blue, blue/white, orange,
orange/white, green, green/white.
LSHF.
Outer Jacket:
DIAMETERS
Center Conductor:
Outside Diameter:
0.5mm (0.019in).
5.5mm (0.216in).
ELECTRICAL
Impedance:
DC Resistance:
Mutual Capacitance:
Delay Skew:
Temperature:
100Ω.
93.8Ω/km (30.7Ω/1000ft).
56nF/km nominal.
45nS/100m.
−20° to 75°C (−4° to 167°F).
REGULATORY
UL:
CUL:
RoHS:
CM.
C(UL) CM, FT4.
In compliance with European directive 2002/95/IEC.
configurations:
80
CABLES & CONNECTORS
MODEL
DESCRIPTION
BC-CAT5E/LSHF
CAT 5e UTP (Unshielded Twisted Pair)
Cable - Low Smoke & Halogen Free
INSTALLER SOLUTIONS CATALOG 2014
LENGTH
985ft
300m
www.kramerelectronics.com
BC-XTP/LSHF
Pico Skew UTP (Unshielded Twisted Pair) Bulk Cable − Low Smoke & Halogen Free
jacket
center
conductor
insulator
FEATURES
●●
Quality Construction - Durable and flexible bulk cable. 4 pairs of solid 24AWG
copper.
●●
Optimized for High-Res Video/Audio Signals - 4 pairs are twisted at the same ratio
so the actual length of each is identical. Video shift or “skew” is eliminated in long
runs because the RGB color signals arrive at the same time. Note that BC-XTP/
LSHF is not suited for high-speed data or network applications.
●●
Optimized for Kramer Hardware - Use with any of Kramer’s wide range of twisted
pair transmitter-receiver sets such as PT-110/PT-120, WP-110/PT-120,
etc. Terminate with RJ-45 connectors, or strip and attach to terminal strips or
punchdown blocks as needed.
●●
Length - Available in pull boxes of 300m (985ft).
Specifications:
CONSTRUCTION
Center Conductor:
Jacket Colors:
24AWG, solid bare copper.
Brown, brown/white, blue, blue/white, orange, orange/
white, green, green/white.
Green with white lettering.
Outer Jacket Color:
Outer Jacket:
LSHF.
DIAMETERS
Center Conductor:
Outside Diameter:
0.1mm (0.004in).
5.5mm (0.22in).
ELECTRICAL
Impedance:
DC Resistance:
Pair to Pair Skew:
Attenuation (dB/100ft):
100Ω.
100Ω/km (30.4Ω/1000ft).
1.5ns/100m.
−0.6dB @1MHz
−2.0dB @10MHz
−6.7dB @100MHz
−8.5dB @155MHz
−9.7dB @200MHz
−13.6dB @350MHz.
Temperature:
−20° to 75°C (−4° to 167°F).
REGULATORY
UL:
CSA:
RoHS:
CM.
C(UL) CM, FT4.
In compliance with European directive 2002/95/IEC.
configurations:
MODEL
BC-XTP/LSHF-300
www.kramerelectronics.com
DESCRIPTION
LENGTH
Pico Skew UTP (Unshielded Twisted Pair)
Cable - Low Smoke & Halogen Free
INSTALLER SOLUTIONS CATALOG 2014
CABLES & CONNECTORS
985ft
81
300m
CABLES & CONNECTORS
Kramer's BC-XTP/LSHF is low-smoke, halogen free unshielded twisted pair
(UTP) type cable designed as the ideal companion to Kramer analog twisted pair
transmitter-receiver sets. BC-XTP/LSHF resembles typical CAT 5e, but with
internal components optimized for transmission of video/audio signals rather
than high-speed data.
CABLE ASSEMBLIES
VIDEO ASSEMBLIES
15-Pin HD
CABLES & CONNECTORS
CLS-GM/GM
15−pin HD Cable − Low Smoke & Halogen Free
Kramer’s CLS-GM/GM computer graphics video cable is a high-performance
cable with molded 15-pin HD connectors on both ends. It is used for connecting
computer graphics video signals between computers or video scalers and plasma,
LCD or other popular display technologies. DDC2 is supported. The CLS Series is
low smoke and halogen free.
FEATURES
●●
Quality Construction - High-resolution 26AWG mini coax for video.
●●
Easy Installation - Pre-terminated with molded 15-pin HD connectors, gold-plated
pins and thumbscrews for easy connection.
●●
All 15 Pins Connected.
●●
Low Smoke, Halogen Free.
●●
Varied Selection of Lengths - Available in versions of 0.9 to 15m (3, 6, 10, 12,
15, 25, 35 and 50ft).
configurations:
MODEL
DESCRIPTION
LENGTH
Male - Male
CLS-GM/GM-3
Molded 15-pin HD (M) to 15-pin HD (M) Cable
3ft
0.9m
CLS-GM/GM-6
Molded 15-pin HD (M) to 15-pin HD (M) Cable
6ft
1.8m
CLS-GM/GM-10
Molded 15-pin HD (M) to 15-pin HD (M) Cable
10ft
3m
CLS-GM/GM-15
Molded 15-pin HD (M) to 15-pin HD (M) Cable
15ft
4.6m
CLS-GM/GM-25
Molded 15-pin HD (M) to 15-pin HD (M) Cable
25ft
7.6m
CLS-GM/GM-35
Molded 15-pin HD (M) to 15-pin HD (M) Cable
35ft
10.7m
CLS-GM/GM-35
Molded 15-pin HD (M) to 15-pin HD (M) Cable
35ft
10.7m
CLS-GM/GM-50
Molded 15-pin HD (M) to 15-pin HD (M) Cable
50ft
15.2m
CLS-GMA/GMA
15−pin HD & 3.5mm Stereo Audio Cable − Low Smoke & Halogen Free
Kramer’s CLS-GMA/GMA is a high-performance cable with male 15-pin HD and
3.5mm stereo audio connectors at each end. It is perfect for installations of
computer graphics video to display that require an audio signal as well. DDC2 is
supported. The CLS Series is low smoke and halogen free.
FEATURES
●●
Quality Construction - Constructed with rugged and flexible 14-conductor cable.
●●
Easy Connection - Pre-terminated with molded 15-pin HD connectors (male to
male), gold plated pins and thumbscrews for easy connection and a 3.5mm stereo
audio mini jack.
●●
Easy Installation - Audio leads extend 24in (61cm) beyond the 15-pin HD head at
one end, and 20cm (8in) at the other.
●●
Low Smoke, Halogen Free.
●●
Varied Selection of Lengths - Available in versions of 0.9 to 15m (3, 6, 10, 15,
25, 35 and 50ft).
configurations:
MODEL
DESCRIPTION
LENGTH
Male - Male
CLS-GMA/GMA-3
15-pin HD (M) to 15-pin HD (M) + 3.5mm Stereo Audio Cable
3ft
0.9m
CLS-GMA/GMA-6
15-pin HD (M) to 15-pin HD (M) + 3.5mm Stereo Audio Cable
6ft
1.8m
CLS-GMA/GMA-10
15-pin HD (M) to 15-pin HD (M) + 3.5mm Stereo Audio Cable
10ft
3m
CLS-GMA/GMA-15
15-pin HD (M) to 15-pin HD (M) + 3.5mm Stereo Audio Cable
15ft
4.6m
CLS-GMA/GMA-25
15-pin HD (M) to 15-pin HD (M) + 3.5mm Stereo Audio Cable
25ft
7.6m
CLS-GMA/GMA-35
15-pin HD (M) to 15-pin HD (M) + 3.5mm Stereo Audio Cable
35ft
10.7m
CLS-GMA/GMA-50
15-pin HD (M) to 15-pin HD (M) + 3.5mm Stereo Audio Cable
50ft
15.2m
82
CABLES & CONNECTORS
INSTALLER SOLUTIONS CATALOG 2014
www.kramerelectronics.com
DVI
CLS-DM/DM
15−pin HD Cable − Low Smoke & Halogen Free
FEATURES
●●
Quality Construction - DVI-D connection eliminates the analog conversion process
providing maximum clarity and resolution in displayed images.
●●
HDCP & Dual Link Compliant.
●●
Low Smoke, Halogen Free.
●●
Varied Selection of Lengths - Available in versions of 0.9 to 15m (3, 6, 10, 15,
25 and 50ft).
configurations:
MODEL
DESCRIPTION
LENGTH
Male - Male
CLS-DM/DM-3
DVI-D (M) to DVI-D (M) Dual Link Cable
3ft
0.9m
CLS-DM/DM-6
DVI-D (M) to DVI-D (M) Dual Link Cable
6ft
1.8m
CLS-DM/DM-10
DVI-D (M) to DVI-D (M) Dual Link Cable
10ft
3m
CLS-DM/DM-15
DVI-D (M) to DVI-D (M) Dual Link Cable
15ft
4.6m
CLS-DM/DM-25
DVI-D (M) to DVI-D (M) Dual Link Cable
25ft
7.6m
CLS-DM/DM-50
DVI-D (M) to DVI-D (M) Dual Link Cable
50ft
15.2m
HDMI
CLS-HM/HM/ETH
Standard HDMI Cable with Ethernet − Low Smoke & Halogen Free
Kramer's CLS-HM/HM/ETH is a high-performance HDMI cable with Ethernet
having molded HDMI connectors at both ends. It supports HDMI Ethernet
Channel, Deep Color, x.v.Color™, Lip Sync, HDMI Uncompressed Audio Channels,
Dolby TrueHD, DTS-HD and CEC. The CLS Series is low smoke and halogen free.
FEATURES
●●
Quality Performance - Kramer’s new High Definition Multimedia Interface (HDMI)
cables provide an uncompressed digital link between consumer electronics
equipment such as DVD players, set-top boxes and audio/video monitors such as
plasma display screens for high-definition TVs.
●●
High-Quality Connectors - Gold-plated connectors resist corrosion, and offer the
best possible connectivity.
●●
Low Smoke, Halogen Free.
●●
Varied Selection of Lengths - Available in versions of 0.9 to 15.2m (3, 6, 10, 15,
25, 35 and 50ft).
configurations:
MODEL
DESCRIPTION
LENGTH
Male - Male
CLS-HM/HM/ETH-3
HDMI (M) to HDMI (M) Cable with Ethernet
3ft
0.9m
CLS-HM/HM/ETH-6
HDMI (M) to HDMI (M) Cable with Ethernet
6ft
1.8m
CLS-HM/HM/ETH-10
HDMI (M) to HDMI (M) Cable with Ethernet
10ft
3m
CLS-HM/HM/ETH-15
HDMI (M) to HDMI (M) Cable with Ethernet
15ft
4.6m
CLS-HM/HM/ETH-25
HDMI (M) to HDMI (M) Cable with Ethernet
25ft
7.6m
CLS-HM/HM/ETH-35
HDMI (M) to HDMI (M) Cable with Ethernet
35ft
10.7m
CLS-HM/HM/ETH-50
HDMI (M) to HDMI (M) Cable with Ethernet
50ft
15.2m
www.kramerelectronics.com
INSTALLER SOLUTIONS CATALOG 2014
CABLES & CONNECTORS
83
CABLES & CONNECTORS
Kramer's CLS-DM/DM is a high-performance DVI cable with molded DVI-D
connectors at both ends. This dual link cable is designed to carry digital-only
signals (24+1 pin) used for direct digital connections between a source and
display device such as flat panel monitors and video/data projectors. The CLS
Series is low smoke and halogen free.
RAPID RUN® CABLES & WALLPLATES
NEW
RapidRun®
CABLES & CONNECTORS
RapidRun Cabling System
RapidRun offers a high-performance connection that saves installation time and allows future A/V cabling upgrades. RapidRun’s
reliable connector fits a wide variety of flying leads or wall plates, including VGA, composite video, s-Video, component video, or HDMI
and DVI plus audio options in both CL2 and plenum-rated cables.
RapidRun Multi-Format represents the most significant upgrade to the RapidRun cabling solution to date. With enhanced engineering
that includes individually shielded pairs and an isolated ground for audio lines, this runner cable meets the rigorous demand for
applications in which multiple audio/video devices are run over a single cable. RapidRun® is designed to be the standard for in-wall
audio/video installations. Using pre-terminated break-away flying leads and wall plates with an in-wall runner ensures flexible, efficient,
high-quality connections for all types of equipment, with no field terminations.
FEATURES
●● Reduces Installation Time.
●● Future-Proofs Installations.
●● Color-Coded Break-Aways - Require no tools, splicing or soldering.
●● Available in CL2 or CMP (Plenum) Ratings.
●● Runner Cable Pull Caps - Withstand up to 30lbs of pressure.
●● Over 20 Break-Away Configurations.
●● Analog Runner Cables - Up to 150ft 1600x1200.
●● Digital Runner Cables - Up to 100ft 1080p (1920x1200).
RapidRun Cabling is a simple two-part, modular cabling solution
Choose a break-away for each end
(wall plate/flying lead).
84
CABLES & CONNECTORS
INSTALLER SOLUTIONS CATALOG 2014
www.kramerelectronics.com
ANALOG (ORANGE CODED)
ANALOG RUNNER CABLES
RUNNER - NON PLENUM
NEW
RR-AN
Use this CMG-rated Multi-Format runner for in-wall installations that support highdensity, multiformat applications. Whether hanging a projector in a modern 21st
century classroom or installing a commercial digital signage system, a clean,
crisp signal is delivered every time.
Note: Each complete RapidRun Multi-Format runner solution requires a breakaway flying lead or wall plate to terminate each end of the runner cable. Each
runner requires two break-away flying leads, two wall plates, or one break-away
flying lead and one wall plate.
FEATURES
●●
Color Code - Orange (analog).
●●
RapidRun Connectors - 2 custom RR 15-pin (F), diameter 16mm.
●●
Installation Requirements - Requires multiformat (orange) wall plates and/or breakaway flying leads at each end.
●●
CMG-Rated for In-Wall Installations.
●●
Unique Protective Pulling Cap - Withstands 30 pounds of tension, allowing the cable
to pull easily through walls and existing conduit.
●●
Varied Selection of Lengths - Available in versions of 6, 10, 15, 25, 35, 50, 75,
100, 125 & 150ft (1.8 to 45.7m).
configurations:
MODEL
DESCRIPTION
RR-AN-6
RapidRun® Multi-Format Runner Cable
6ft
RR-AN-10
RapidRun® Multi-Format Runner Cable
10ft
3m
RR-AN-15
RapidRun® Multi-Format Runner Cable
6ft
4.6m
RR-AN-25
RapidRun® Multi-Format Runner Cable
25ft
7.6m
RR-AN-35
RapidRun® Multi-Format Runner Cable
35ft
10.7m
RR-AN-50
RapidRun® Multi-Format Runner Cable
50ft
15.2m
RR-AN-75
RapidRun® Multi-Format Runner Cable
75ft
22.9m
RR-AN-100
RapidRun® Multi-Format Runner Cable
100ft
30.5m
RR-AN-125
RapidRun® Multi-Format Runner Cable
125ft
38.1m
RR-AN-150
RapidRun® Multi-Format Runner Cable
150ft
45.7m
www.kramerelectronics.com
INSTALLER SOLUTIONS CATALOG 2014
LENGTH
CABLES & CONNECTORS
1.8m
85
CABLES & CONNECTORS
RapidRun® Analog Multi−Format Runner Cable
RUNNER - PLENUM
NEW
RRP-AN
RapidRun® Plenum−Rated Analog Multi−Format Runner Cable
CABLES & CONNECTORS
Use this plenum-rated multiformat runner for in-wall installations that support
high-density, multiformat applications. Whether hanging a projector in a modern
21st century classroom or installing a commercial digital signage system, a
clean, crisp signal is delivered every time.
Note: Each complete RapidRun Multi-Format runner solution requires a breakaway flying lead or wall plate to terminate each end of the runner cable. Each
runner requires two break-away flying leads, two wall plates, or one break-away
flying lead and one wall plate.
FEATURES
●●
Color Code - Orange (analog).
●●
RapidRunn Connectors - 2 custom RR 15-pin (F).
●●
Installation Requirements - Requires multiformat (orange) wall plates and/or breakaway flying leads at each end.
●●
Rating - CMP-rated for installations in plenum spaces.
●●
Unique Protective Pulling Cap - Withstands 30 pounds of tension, allowing cable to
pull easily through walls and existing conduits.
●●
Varied Selection of Lengths - Available in versions of 15, 25, 35, 50, 75, 100 125
& 150ft (4.6 to 45.7m).
configurations:
MODEL
DESCRIPTION
RRP-AN-15
RapidRun® Plenum-Rated Multi-Format Runner Cable
15ft
LENGTH
RRP-AN-25
RapidRun® Plenum-Rated Multi-Format Runner Cable
25ft
7.6m
RRP-AN-35
RapidRun® Plenum-Rated Multi-Format Runner Cable
35ft
10.7m
RRP-AN-50
RapidRun® Plenum-Rated Multi-Format Runner Cable
50ft
15.2m
RRP-AN-75
RapidRun® Plenum-Rated Multi-Format Runner Cable
75ft
22.9m
RRP-AN-100
RapidRun® Plenum-Rated Multi-Format Runner Cable
100ft
30.5m
RRP-AN-125
RapidRun® Plenum-Rated Multi-Format Runner Cable
125ft
38.1m
RRP-AN-150
RapidRun® Plenum-Rated Multi-Format Runner Cable
150ft
45.7m
PLENUM CABLES
4.6m
86
CABLES & CONNECTORS
INSTALLER SOLUTIONS CATALOG 2014
www.kramerelectronics.com
ANALOG RUNNER TERMINATIONS
FLYING LEADS
NEW
RR-C-GM
RapidRun® 15−Pin HD Flying Lead
FEATURES
●●
Color Code - Orange (for use with analog runners).
●●
AV Connector - 1 15-pin HD.
●●
RapidRun Connector - Custom RR 19-pin (F), diameter 16mm.
●●
Varied Selection of Lengths - Available in versions of 1.5, 3, 6 & 10ft (0.5 to 3.0m).
configurations:
MODEL
DESCRIPTION
LENGTH
Female
RapidRun® 15-Pin HD (F) Flying Lead
1.5ft
RR-C-GM-1.5
RapidRun® 15-Pin HD (M) Flying Lead
1.5ft
0.5m
RR-C-GM-3
RapidRun® 15-Pin HD (M) Flying Lead
3ft
0.9m
RR-C-GM-6
RapidRun® 15-Pin HD (M) Flying Lead
6ft
1.8m
RR-C-GM-10
RapidRun® 15-Pin HD (M) Flying Lead
10ft
3m
RR-C-GF-1.5
0.5m
Male
NEW
RR-C-GMA
RapidRun® 15−pin HD & 3.5mm Audio Flying Lead
Ideal for educational and institutional installations, this flying lead sends PC video
and 3.5mm stereo audio over one cable. It is commonly used on the display
(projector) end of classroom setups with the corresponding wall plate used at the
teacher's station.
For more information on the RapidRun Multi-Format products, click here.
Note: Each complete RapidRun Multi-Format solution requires a break-away
flying lead or wall plate to terminate each end of the runner cable. Each runner
requires two break-away flying leads, two wall plates, or one break-away flying
lead and one wall plate.
FEATURES
●●
Color Code - Orange (for use with analog runners).
●●
AV Connectors - 1 15-pin HD, 1 3.5mm stereo audio.
●●
RapidRun Connector - Custom RR 19-pin (M), diameter 16mm.
●●
Varied Selection of Length - Available in versions of 1.5, 3, 6, & 10ft (0.5 to 3.0m).
configurations:
MODEL
DESCRIPTION
RR-C-GMA-1.5
RapidRun® 15-Pin HD + 3.5mm Flying Lead
1.5ft
0.5m
RR-C-GMA-3
RapidRun® 15-Pin HD + 3.5mm Flying Lead
3ft
0.9m
RR-C-GMA-6
RapidRun® 15-Pin HD + 3.5mm Flying Lead
6ft
1.8m
RR-C-GMA-10
RapidRun® 15-Pin HD + 3.5mm Flying Lead
10ft
3m
www.kramerelectronics.com
INSTALLER SOLUTIONS CATALOG 2014
LENGTH
CABLES & CONNECTORS
87
CABLES & CONNECTORS
Ideal for educational and institutional installations, this flying lead is commonly
used on the display (projector) end of classroom setups with the corresponding
wall plate used at the teacher's station.
Note: Each complete RapidRun Multi-Format solution requires a break-away
flying lead or wall plate to terminate each end of the runner cable. Each runner
requires two break-away flying leads, two wall plates, or one break-away flying lead
and one wall plate.
NEW
RR-C-MH1
CABLES & CONNECTORS
RapidRun® 15−Pin HD, 3.5mm & 3 RCA (AV) Flying Lead
Ideal for educational and institutional installations, this flying lead sends PC
video, 3.5mm stereo audio and RCA composite audio/video over one cable. It
is commonly used on the display (projector) end of classroom setups with the
corresponding wall plate used at the teacher's station.
Note: Each complete RapidRun Multi-Format solution requires a break-away
flying lead or wall plate to terminate each end of the runner cable. Each runner
requires two break-away flying leads, two wall plates, or one break-away flying
lead and one wall plate. Due to constraints of available conductors for signal
transmission, EDID signals are not supported with this product.
FEATURES
●●
Color Code - Orange (for use with analog runners).
●●
AV Connectors - 1 15-pin HD, 1 3.5mm & 3 RCA.
●●
RapidRun Connector - Custom RR 19-pin (M), diameter 16mm.
●●
Varied Selection of Lengths - Available in versions of 1.5, 3, 6 & 10ft (0.5 to
3.0m).
configurations:
MODEL
DESCRIPTION
RR-C-MH1-1.5
RapidRun® 15-Pin HD, 3.5mm + 3 RCA (AV) Flying Lead
1.5ft
0.5m
RR-C-MH1-3
RapidRun® 15-Pin HD, 3.5mm + 3 RCA (AV) Flying Lead
3ft
0.9m
RR-C-MH1-6
RapidRun® 15-Pin HD, 3.5mm + 3 RCA (AV) Flying Lead
6ft
1.8m
RR-C-MH1-10
RapidRun® 15-Pin HD, 3.5mm + 3 RCA (AV) Flying Lead
10ft
3m
88
CABLES & CONNECTORS
LENGTH
INSTALLER SOLUTIONS CATALOG 2014
www.kramerelectronics.com
WALL PLATES
NEW
RR-WP-GF
RapidRun® 15−Pin HD Decora Style Wall Plate
FEATURES
Color Code - Orange (for use with analog runners).
AV Connectors - 1 15-pin HD.
●● RapidRun Connector - Custom RR 15-pin (M), diameter 16mm.
●● Wall Plate Size - 1 gang US.
●●
●●
NEW
RR-WP-GFA
RapidRun® 15−Pin HD & 3.5mm Audio Decora Style Wall Plate
Ideal for educational and institutional installations, this wall plate receives PC video and
3.5mm stereo from one cable. Constructed from aluminum for durability, this wall plate
has a locking connector that enables the integrator to save valuable space inside the
surface mount or electrical box that typically is already packed with cables.
FEATURES
Color Code - Orange (for use with analog runners).
AV Connectors - 1 15-pin HD & 1 3.5mm.
●● RapidRun Connector - Custom RR 15-pin (M), diameter 16mm.
●● Wall Plate Size - 1 gang US.
●●
●●
NEW
RR-WP-MH1
RapidRun® 15−Pin HD, 3.5mm & 3 RCA Audio/Video Wall Plate
Ideal for educational and institutional installations, this wall plate receives PC video,
3.5mm stereo audio and RCA composite audio/video from one cable. Constructed from
aluminum for durability, the wall plate has a locking connector that enables the integrator
to save valuable space inside the surface mount or electrical box that typically is already
packed with cables.
Note: Each complete RapidRun Multi-Format solution requires a break-away flying lead
or wall plate to terminate each end of the runner cable. Each runner requires two breakaway flying leads, two wall plates, or one break-away flying lead and one wall plate. Due
to constraints of available conductors for signal transmission, EDID signals are not
supported with this product.
FEATURES
Color Code - Orange (for use with analog runners).
AV Connectors - 1 15-pin HD, 1 3.5mm & 3 RCA.
●● RapidRun Connector - Custom RR 15-pin (M), diameter 16mm.
●● Wall Plate Size - 1 & 2 gang US.
●●
●●
www.kramerelectronics.com
INSTALLER SOLUTIONS CATALOG 2014
CABLES & CONNECTORS
89
CABLES & CONNECTORS
Constructed from aluminum for durability, this wall plate has a locking connector that
enables the integrator to save valuable space inside the surface mount or electrical box
that typically is already packed with cables.
DIGITAL (RED CODED)
DIGITAL RUNNER CABLES
RUNNER - NON PLENUM
NEW
CABLES & CONNECTORS
RR-DG
RapidRun® Digital Runner Cable
Use this digital runner for in-wall installations in applications connecting an HDTV
to different source devices, or for connecting a PC to a monitor or projector.
Whether hanging a flat panel TV in a home or installing a commercial digital
signage system, you can count on a crisp, clean signal up to 1080p. When
running a digital signal at this length with RapidRun, a passive flying lead or wall
plate is required on each end.
Terminate with flying leads (with lengths up to 10 feet), or with wall plates to
meet the specific requirements of your installation.
Note: Each complete RapidRun solution requires a passive break-away flying lead
or passive wall plate to terminate each end of the runner cable.
FEATURES
●●
Color Code - Red (digital).
●●
RapidRun Connectors - 2 custom RR 19-pin (F), diameter 16mm.
●●
Installation Requirements - Requires digital (red) wall plates and/or break-away
flying leads at each end; runners greater than 35ft require 1 active flying lead or
1 active wall plate.
●●
Supports HDMI® and DVI-D High-Resolution Video up to 1080p.
●●
Unique Protective Pulling Cap - Withstands 30 pounds of tension, allowing cable to
pull easily through walls and existing conduits.
●●
Varied Selection of Lengths - Available in versions of 6, 10, 15, 25, 35 & 50, 65,
75 & 100ft (1.8 to 30.5m).
configurations:
MODEL
DESCRIPTION
RR-DG-6
RapidRun® Digital Runner Cable
6ft
RR-DG-10
RapidRun® Digital Runner Cable
10ft
3m
RR-DG-15
RapidRun® Digital Runner Cable
15ft
4.6m
RR-DG-25
RapidRun® Digital Runner Cable
25ft
7.6m
RR-DG-35
RapidRun® Digital Runner Cable
35ft
10.7m
RR-DG-50
RapidRun® Digital Runner Cable
50ft
15.2m
RR-DG-65
RapidRun® Digital Runner Cable
65ft
19.5m
RR-DG-75
RapidRun® Digital Runner Cable
75ft
22.9m
RR-DG-100
RapidRun® Digital Runner Cable
100ft
30.5m
90
CABLES & CONNECTORS
LENGTH
INSTALLER SOLUTIONS CATALOG 2014
1.8m
www.kramerelectronics.com
RUNNER - PLENUM
NEW
RRP-DG
RapidRun® Digital Runner Plenum Cable
CABLES & CONNECTORS
These commercial grade, digital plenum runners are ideal for routing audio/video
cables through plenum space above dropped ceilings or under raised floors.
Previous solutions required running conduit through the plenum space prior
to running the cable. This added complexity, time and cost to the installation.
This new line provides flexibility and additional options for integrators and
installers serving commercial markets that must adhere to strict building code
requirements for cabling in plenum spaces.
Available for HDMI®, DVI and DVI+3.5mm audio signals, these cables meet
CMP* rating, the highest fire resistance rating as published by the National Fire
Protection Association (NFPA) in the National Electric Code (NEC). This ensures
that they can meet the demands of virtually any commercial installation.
By supporting resolutions up to 1080p for displays and up to 1920x1200
for computers, and with lengths ranging from 15ft to 100ft - RapidRun digital
plenum is the perfect connectivity solution for A/V equipment used in classrooms
or conference rooms. Each runner includes a connector with a protective pulling
cap that can withstand 30lbs of tension - making for a safe, easy installation in
conduit. Shielded 24AWG copper conductors protect against EMI and RFI to
ensure uninterrupted performance. High-quality materials and construction, along
with rigorous factory testing and a full lifetime warranty, guarantee long term,
dependable performance.
*CMP is equivalent to the FT6 rating in Canada.
Note: Each complete RapidRun solution requires a passive break-away flying lead
or passive wall plate to terminate each end of the runner cable.
FEATURES
●●
Color Code: - Red (digtial).
●●
RapidRun Connectors - 2 custom RR 19-pin (F).
●●
Installation Requirements - Requires digital (red) wall plates and/or break-away
flying leads at each end; runners greater than 35ft require 1 active flying lead or
1 active wall plate.
●●
Supports High Resolution Video - HDMI® and DVI-D up to 1080p.
●●
Unique Protective Pulling Cap - Withstands 30 pounds of tension, pulls easily
through walls and existing conduits.
●●
Varied Selection of Lengths - Available in versions of 15, 25, 35, 50, 65, 75 &
100ft (4.6 to 30.5m).
configurations:
MODEL
DESCRIPTION
RRP-DG-15
RapidRun® Digital Plenum Runner Cable
15ft
LENGTH
RRP-DG-25
RapidRun® Digital Plenum Runner Cable
25ft
7.6m
RRP-DG-35
RapidRun® Digital Plenum Runner Cable
35ft
10.7m
RRP-DG-50
RapidRun® Digital Plenum Runner Cable
50ft
15.2m
RRP-DG-65
RapidRun® Digital Plenum Runner Cable
65ft
19.5m
RRP-DG-75
RapidRun® Digital Plenum Runner Cable
75ft
22.9m
RRP-DG-100
RapidRun® Digital Plenum Runner Cable
100ft
30.5m
4.6m
PLENUM CABLES
www.kramerelectronics.com
INSTALLER SOLUTIONS CATALOG 2014
CABLES & CONNECTORS
91
DIGITAL RUNNER TERMINATIONS
FLYING LEADS
NEW
RR-C-DM
CABLES & CONNECTORS
RapidRun® Digital DVI−D™ Passive Flying Lead
The DVI-D passive flying lead is the right complement for the Digital Runner when
a wall plate is not required. It is most commonly used when connecting a PC to
a monitor or projector. Whether hanging a flat panel TV in a home or installing
a commercial digital signage system, you can count on a crisp, clean signal up
to 1080p.
When using the Digital Runner at lengths up to 35 feet, a passive flying lead or
wall plate is required on each end. When using the Digital Runner at lengths up to
100 feet, a passive break-away is required only at the source end. Terminate with
flying leads (with lengths up to 10 feet), or with wall plates to meet the specific
requirements of your installation.
Note: Each complete RapidRun solution requires a passive break-away flying lead
or passive wall plate on both ends of Runner cables up to and including 35 feet.
For Runners 50 feet and longer, each solution requires a passive break-away
flying lead or passive wall plate on the source end, and an active break-away flying
lead or active wall plate on the display end to terminate the runner cable.
FEATURES
●●
Color Code - Red (for use with digital runners).
●●
Supports High Resolution Video - DVI-D up to 1080p.
●●
AV Connector - 1 DVI-D.
●●
RapidRun Connector - Custom RR 19-pin (F), diameter 16mm.
●●
Varied Selection of Lengths - Available in versions of 1.5, 3, 6 & 10ft (0.5 to 3.0m).
configurations:
MODEL
DESCRIPTION
RR-C-DM-1.5
RapidRun® Digital DVI-D™ Passive Flying Lead
1.5ft
0.5m
RR-C-DM-3
RapidRun® Digital DVI-D™ Passive Flying Lead
3ft
0.9m
RR-C-DM-6
RapidRun® Digital DVI-D™ Passive Flying Lead
6ft
1.8m
RR-C-DM-10
RapidRun® Digital DVI-D™ Passive Flying Lead
10ft
3m
92
CABLES & CONNECTORS
LENGTH
INSTALLER SOLUTIONS CATALOG 2014
www.kramerelectronics.com
NEW
RR-C-DMA
RapidRun® Digital DVI−D™ & 3.5mm Audio Passive Flying Lead
FEATURES
●●
Color Code - Red (for use with digital runners).
●●
Supports DVI-D High-Resolution Video up to 1080p and Stereo Audio.
●●
AV Connectors - 1 DVI-D & 1 3.5mm.
●●
RapidRun Connector - Custom RR 19-pin (F).
●●
Varied Selection of Lengths - Available in 1.5, 3, 6 & 10, versions (0.5 to 3m).
configurations:
MODEL
DESCRIPTION
RR-C-DMA-1.5
RapidRun® Digital DVI-D™ + 3.5mm Audio Passive Flying Lead
1.5ft
LENGTH
0.5m
RR-C-DMA-3
RapidRun® Digital DVI-D™ + 3.5mm Audio Passive Flying Lead
3ft
0.9m
RR-C-DMA-6
RapidRun® Digital DVI-D™ + 3.5mm Audio Passive Flying Lead
6ft
1.8m
RR-C-DMA-10
RapidRun® Digital DVI-D™ + 3.5mm Audio Passive Flying Lead
10ft
3m
NEW
RR-CA-DM
RapidRun® Digital DVI−D™ Active Flying Lead
The DVI-D active flying lead is the right complement for the Digital Runner when an
active wall plate is not required. It is most commonly used in homes when connecting
a PC to a monitor or for digital signage applications when the source is 50 feet or
more away from the display. Whether hanging a flat panel TV in a home or installing a
commercial digital signage system, you can count on a crisp, clean signal up to 1080p.
When using the Digital Runner at lengths from 50 to 100 feet, an active flying lead or
wall plate is required on the display end. Terminate with flying leads (with lengths up
to 10 feet), or with wall plates to meet the specific requirements of your installation.
Note: Each complete RapidRun solution requires a passive break-away flying lead or
passive wall plate on both ends of Runner cables up to 35 feet. For Runners 35 feet
and longer, each solution requires a passive break-away flying lead or passive wall
plate on the source end, and an active break-away flying lead or active wall plate on
the display end to terminate the runner cable.
FEATURES
●●
Color Code - Red (for use with digital runners greater than 35ft).
●●
Supports DVI-D High-Resolution Video up to 1080p.
●●
AV Connector - 1 DVI-D.
●●
RapidRun Connector - Custom RR 19-pin (F).
configurations:
MODEL
DESCRIPTION
RR-CA-DM-6
RapidRun® Digital DVI-D™ & 3.5mm Audio Active Flying Lead
www.kramerelectronics.com
INSTALLER SOLUTIONS CATALOG 2014
LENGTH
6ft
CABLES & CONNECTORS
1.8m
93
CABLES & CONNECTORS
The DVI-D + 3.5mm passive flying lead is the right complement for the Digital Runner
when a wall plate is not required. It is most commonly used when connecting a PC
to a monitor or projector. Whether hanging a flat panel TV in a home or installing
a commercial digital signage system, you can count on a crisp, clean signal up to
1080p and a clear stereo audio signal.
When using the Digital Runner at lengths up to 35 feet, a passive flying lead or
wall plate is required on each end. When using the Digital Runner at lengths up to
100 feet, a passive break-away is required only at the source end. Terminate with
flying leads (with lengths up to 10 feet), or with wall plates to meet the specific
requirements of your installation.
Note: Each complete RapidRun solution requires a passive break-away flying lead or
passive wall plate on both ends of Runner cables up to and including 35 feet. For
Runners 50 feet and longer, each solution requires a passive break-away flying lead
or passive wall plate on the source end, and an active break-away flying lead or active
wall plate on the display end to terminate the runner cable.
NEW
RR-CA-DMA
RapidRun® Digital DVI−D™ & 3.5mm Audio Active Flying Lead
CABLES & CONNECTORS
The DVI-D + 3.5mm active flying lead is the right complement for the Digital Runner
when an active wall plate is not required. It is most commonly used in homes when
connecting a PC to a monitor or for digital signage applications when the source is
50 feet or more away from the display. Whether hanging a flat panel TV in a home or
installing a commercial digital signage system, you can count on a crisp, clean signal
up to 1080p and a clear stereo audio signal.
When using the Digital Runner at lengths from 50 to 100 feet, an active flying lead or
wall plate is required on the display end. Terminate with flying leads (with lengths up
to 10 feet), or with wall plates to meet the specific requirements of your installation.
Note: Each complete RapidRun solution requires a passive break-away flying lead or
passive wall plate on both ends of Runner cables up to and including 35 feet. For
Runners 50 feet and longer, each solution requires a passive break-away flying lead
or passive wall plate on the source end, and an active break-away flying lead or active
wall plate on the display end to terminate the runner cable.
FEATURES
●●
Color Code - Red (for use with digital runners greater than 35ft).
●●
Supports DVI-D High-Resolution Video up to 1080p.
●●
AV Connector - 1 DVI-D & 1 3.5mm.
●●
RapidRun Connector - Custom RR 19-pin (F).
configurations:
MODEL
DESCRIPTION
RR-CA-DMA-6
RapidRun® Digital DVI-D™ & 3.5mm Audio Active Flying Lead
94
CABLES & CONNECTORS
LENGTH
INSTALLER SOLUTIONS CATALOG 2014
6ft
1.8m
www.kramerelectronics.com
NEW
RR-C-HM
RapidRun® Digital HDMI® Passive Flying Lead
FEATURES
●●
Color Code - Red (for use with digital runners).
●●
Supports HDMI High-Resolution Video up to 1080p.
●●
AV Connector - 1 HDMI.
●●
RapidRun Connector - Custom RR 19-pin (F), diameter 16mm.
●●
Varied Selection of Lengths - Available in versions of 0.5, 1.5, 6 & 10ft (0.2 to 3.0m).
configurations:
MODEL
DESCRIPTION
RR-C-HM-0.5
RapidRun® Digital HDMI® Passive Flying Lead
0.5ft
LENGTH
RR-C-HM-1.5
RapidRun® Digital HDMI® Passive Flying Lead
1.5ft
0.5m
RR-C-HM-3
RapidRun® Digital HDMI® Passive Flying Lead
3ft
0.9m
RR-C-HM-6
RapidRun® Digital HDMI® Passive Flying Lead
6ft
1.8m
RR-C-HM-10
RapidRun® Digital HDMI® Passive Flying Lead
10ft
3m
0.15m
NEW
RR-CA-HM
RapidRun® Digital HDMI® Active Flying Lead
The HDMI active flying lead is the right complement for the Digital Runner when an
active wall plate is not required. It is most commonly used in homes when connecting
an HDTV to different source devices (i.e. cable box, DVD player, video game system)
that are 50 feet or more. Whether hanging a flat panel TV in a home or installing a
commercial digital signage system, you can count on a crisp, clean signal up to 1080p.
When using the Digital Runner at lengths from 50 to 100 feet, an active flying lead or
wall plate is required on the display end. Terminate with flying leads (with lengths up
to 10 feet), or with wall plates to meet the specific requirements of your installation.
Note: Each complete RapidRun solution requires a passive break-away flying lead or
passive wall plate on both ends of Runner cables up to and including 35 feet. For
Runners 50 feet and longer, each solution requires a passive break-away flying lead
or passive wall plate on the source end, and an active break-away flying lead or active
wall plate on the display end to terminate the runner cable.
FEATURES
●●
Color Code - Red (for use with digital runners greater than 35ft).
●●
Supports DVI-D High-Resolution Video up to 1080p.
●●
AV Connector - 1 HDMI.
●●
RapidRun Connector - 2 custom RR 15-pin (F), diameter 16mm.
●●
Varied Selection of Lengths - Available in versions of 1.5, 3, 6 & 10ft (0.5 to 3.0m).
configurations:
MODEL
DESCRIPTION
RR-CA-HM-1.5
RapidRun® Digital HDMI® Active Flying Lead
1.5ft
0.5m
RR-CA-HM-3
RapidRun® Digital HDMI® Active Flying Lead
3ft
0.9m
RR-CA-HM-6
RapidRun® Digital HDMI® Active Flying Lead
6ft
1.8m
RR-CA-HM-10
RapidRun® Digital HDMI® Active Flying Lead
10ft
3m
www.kramerelectronics.com
INSTALLER SOLUTIONS CATALOG 2014
LENGTH
CABLES & CONNECTORS
95
CABLES & CONNECTORS
The HDMI passive flying lead is the right complement for the Digital Runner when
a wall plate is not required. It is most commonly used in homes when connecting
an HDTV to different source devices (i.e. cable box, DVD player, video game
system). Whether hanging a flat panel TV in a home or installing a commercial
digital signage system, you can count on a crisp, clean signal up to 1080p.
When using the Digital Runner at lengths up to 35 feet, a passive flying lead or
wall plate is required on each end. When using the Digital Runner at lengths up to
100 feet, a passive break-away is required only at the source end. Terminate with
flying leads (with lengths up to 10 feet), or with wall plates to meet the specific
requirements of your installation.
Note: Each complete RapidRun solution requires a passive break-away flying lead
or passive wall plate on both ends of Runner cables up to and including 35 feet.
For runners 50 feet and longer, each solution requires a passive break-away flying
lead or passive wall plate on the source end, and an active break-away flying lead
or active wall plate on the display end to terminate the runner cable.
WALL PLATES
NEW
RR-WP-DF
RapidRun® Digital DVI−D™ Passive Wall Plate
CABLES & CONNECTORS
The DVI-D passive wall plate is the right complement for the Digital Runner when a clean,
finished look is required. It is most commonly used when connecting a PC to a monitor
or projector. Whether hanging a flat panel TV in a home or installing a commercial digital
signage system, you can count on a crisp, clean signal up to 1080p.
When using the Digital Runner at lengths up to 35 feet, a passive flying lead or wall
plate is required on each end. When using the digital runner at lengths up to 100 feet,
a passive break-away is required only at the source end. Terminate with flying leads (with
lengths up to 10 feet), or with wall plates to meet the specific requirements of your
installation.
Note: Each complete RapidRun solution requires a passive break-away flying lead or
passive wall plate on both ends of Runner cables up to and including 35 feet. For runners
50 feet and longer, each solution requires a passive break-away flying lead or passive wall
plate on the source end, and an active break-away flying lead or active wall plate on the
display end to terminate the runner cable.
FEATURES
●●
●●
●●
●●
●●
●●
Color Code - Red (for use with digital runners).
Supports DVI-D High-Resolution Video up to 1080p.
Compatible with Leviton Decora® Brand Cover Plates.
AV Connector - 1 DVI-D.
RapidRun Connector - Custom RR 19-pin (F), diameter 16mm.
Wall Plate Size - 1 gang US.
NEW
RR-WP-DFA
RapidRun® Digital DVI−D™ & 3.5mm Audio Passive Wall Plate
The DVI-D + 3.5mm passive wall plate is the right complement for the Digital Runner
when a clean, finished look is required. It is most commonly used when connecting a
PC to a monitor or projector. Whether hanging a flat panel TV in a home or installing a
commercial digital signage system, you can count on a crisp, clean signal up to 1080p
and a clear stereo audio signal.
When using the digital runner at lengths up to 35 feet, a passive flying lead or wall plate
is required on each end. When using the digital runner at lengths up to 100 feet, a
passive break-away is required only at the source end. Terminate with flying leads (with
lengths up to 10 feet), or with wall plates to meet the specific requirements of your
installation.
Note: Each complete RapidRun solution requires a passive break-away flying lead or
passive wall plate on both ends of runner cables up to and including 35 feet. For runners
50 feet and longer, each solution requires a passive break-away flying lead or passive wall
plate on the source end, and an active break-away flying lead or active wall plate on the
display end to terminate the runner cable.
FEATURES
Color Code - Red (for use with digital runners).
Supports DVI-D High-Resolution Video up to 1080p and Stereo Audio.
●● Compatible with Leviton Decora® Brand Cover Plates.
●● AV Connectors - 1 DVI-D & 1 3.5mm.
●● RapidRun Connector - Custom RR 19-pin (F), diameter 16mm.
●●
●●
96
CABLES & CONNECTORS
INSTALLER SOLUTIONS CATALOG 2014
www.kramerelectronics.com
NEW
RR-WPA-DF
RapidRun® Digital DVI−D™ Active Wall Plate
FEATURES
Color Code - Red (for use with digital runners more than 35ft).
Supports DVI-D High-Resolution Video up to 1080p.
●● Compatible with Leviton Decora® Brand Cover Plates.
●● AV Connector - 1 DVI-D.
●● RapidRun Connector - Custom RR 19-pin (F), diameter 16mm.
●●
●●
NEW
RR-WPA-DFA
RapidRun® Digital DVI−D™ & 3.5mm Audio Active Wall Plate
The DVI-D + 3.5mm audio active wall plate is the right complement for the Digital
Runner when a clean, finished look is required. It is most commonly used in homes when
connecting a PC to a monitor or projector. Whether hanging a flat panel TV in a home or
installing a commercial digital signage system, you can count on a crisp, clean signal up
to 1080p and a clear stereo audio signal.
When using the Digital Runner at lengths from 50 to 100 feet, an active wall plate or
break-away is required at the display end. Terminate with flying leads (with lengths up to
10 feet), or with wall plates to meet the specific requirements of your installation.
Note: Each complete RapidRun solution requires a passive break-away flying lead or
passive wall plate on both ends of runner cables up to and including 35 feet. For runners
50 feet and longer, each solution requires a passive break-away flying lead or passive wall
plate on the source end, and an active break-away flying lead or active wall plate on the
display end to terminate the runner cable.
FEATURES
●●
●●
●●
●●
●●
●●
www.kramerelectronics.com
Color Code - Red (for use with digital runners).
Supports DVI-D High Resolution Video up to 1080p and Stereo Audio.
AV Connectors - 1 DVI-D & 1 3.5mm.
RapidRun Connector - Custom RR 19-pin (F), diameter 16mm.
Compatible with Leviton Decora® Brand Cover Plates.
Wall Plate Size - 1 gang US.
INSTALLER SOLUTIONS CATALOG 2014
CABLES & CONNECTORS
97
CABLES & CONNECTORS
The DVI-D active wall plate is the right complement for the Digital Runner when a clean,
finished look is required. It is most commonly used in homes when connecting a PC
to a monitor or projector. Whether hanging a flat panel TV in a home or installing a
commercial digital signage system, you can count on a crisp, clean signal up to 1080p.
When using the Digital Runner at lengths from 50 to 100 feet, an active wall plate or
break-away is required at the display end. Terminate with flying leads (with lengths up to
10 feet), or with wall plates (available in three colors) to meet the specific requirements
of your installation.
Note: Each complete RapidRun solution requires a passive break-away flying lead or
passive wall plate on both ends of Runner cables up to and including 35 feet. For runners
50 feet and longer, each solution requires a passive break-away flying lead or passive wall
plate on the source end, and an active break-away flying lead or active wall plate on the
display end to terminate the runner cable.
NEW
RR-WP-HF
RapidRun® Digital HDMI® Passive Wall Plate
CABLES & CONNECTORS
The HDMI passive wall plate is the right complement for the digital runner when a clean,
finished look is required. It is most commonly used in homes when connecting an HDTV
to different source devices (i.e. cable box, DVD player, video game system). Whether
hanging a flat panel TV in a home or installing a commercial digital signage system, you
can count on a crisp, clean signal up to 1080p.
When using the digital runner at lengths up to 35 feet, a passive flying lead or wall plate
is required on each end. When using the Digital Runner at lengths up to 100 feet, a
passive break-away is required only at the source end. Terminate with flying leads (with
lengths up to 10 feet), or with wall plates to meet the specific requirements of your
installation.
Note: Each complete RapidRun solution requires a passive break-away flying lead or
passive wall plate on both ends of runner cables up to and including 35 feet. For runners
50 feet and longer, each solution requires a passive break-away flying lead or passive wall
plate on the source end, and an active break-away flying lead or active wall plate on the
display end to terminate the runner cable.
FEATURES
Color Code - Red (for use with digital runners).
Compatible with Leviton Decora® Brand Cover Plates.
●● Supports HDMI High Resolution Video up to 1080p.
●● Wall Plate Size - 1 gang US.
●● RapidRun Connector - Custom RR 15-pin (M), diameter 16mm.
●●
●●
NEW
RR-WPA-HF
RapidRun® Digital HDMI® Active Wall Plate
The HDMI active wall plate is the right complement for the Digital Runner when a clean,
finished look is required. It is most commonly used in homes when connecting an HDTV
to different source devices (i.e. cable box, DVD player, video game system) when the
source is 50 feet or more away from the display. Whether hanging a flat panel TV in a
home or installing a commercial digital signage system, you can count on a crisp, clean
signal up to 1080p.
When using the Digital Runner at lengths from 50 to 100 feet, an active wall plate or
break-away is required at the display end. Terminate with flying leads (with lengths up to
10 feet), or with wall plates to meet the specific requirements of your installation.
Note: Each complete RapidRun solution requires a passive break-away flying lead or
passive wall plate on both ends of Runner cables up to and including 35 feet. For runners
50 feet and longer, each solution requires a passive break-away flying lead or passive wall
plate on the source end, and an active break-away flying lead or active wall plate on the
display end to terminate the runner cable.
FEATURES
Color Code - Red (for use with digital runners).
Supports DVI-D High-Resolution Video up to 1080p and Stereo Audio.
●● Compatible with Leviton Decora® Brand Cover Plates.
●● AV Connectors - 1 DVI-D & 1 3.5mm.
●● RapidRun Connector - Custom RR 19-pin (F), diameter 16mm.
●●
●●
98
CABLES & CONNECTORS
INSTALLER SOLUTIONS CATALOG 2014
www.kramerelectronics.com
ACCESSORIES
DIGITAL ACCESSORIES
NEW
RR-PS-HM
RapidRun® Digital HDMI® Voltage Inserter
FEATURES
Color Code - Red (for use with HDMI wall plates or flying leads).
AV Connectors - 1 HDMI (F) & 1 HDMI (M).
●● Adds 5V DC at Source.
●●
●●
www.kramerelectronics.com
INSTALLER SOLUTIONS CATALOG 2014
CABLES & CONNECTORS
99
CABLES & CONNECTORS
At times, a source device (cable box, DVD player, video game system) does not have
enough power dedicated to the HDMI output. This causes a voltage drop and the video
quality is affected, or worse, there is no video at all. The voltage inserter solves the
problem by isolating the power from the source device, and it provides one amp of
dedicated current to give the crisp, clean signal that is expected from high-definition
equipment, up to 1080p resolution.
ACCESSORIES AND TERMINATIONS
Kramer’s tools and connectors are the perfect way to finish your installation. Our compression connection technology is the best
and most reliable available. In less than a minute, our termination system creates perfect compression that gives you 360˚ electrical
continuity and withstands an 80lb (36.3kg) pull test.
CABLES & CONNECTORS
TOOLS, ADAPTERS & CONNECTORS
ADAPTERS & ADAPTER CABLES
AD-BF/RM
AD-GM/GM
BNC (F) to RCA (M) Adapter
15-pin HD (M/M) Gender
Changer
AD-GF/GF
AD-RF/RF
15-pin HD (F/F) Gender
Changer
RCA (F/F) Gender Changer
AD-GM/GF/RA
15−pin HD (M) to 15-pin HD
(F) Right−Angle Adapter
AD-A35M/2RF
3.5mm (M) to 2 RCA (F)
Adapter
AD-D9M/D9M
9-pin D (M/M) Gender
Changer
AD-BM/RF
BNC (M) to RCA (F) Adapter
AD-D9F/D9F
9-pin D (F/F) Gender
Changer
AD-BF/BF
BNC (F/F) Gender Changer
AD-DM/GF
DVI (M) to 15-pin HD (F)
Adapter
AD-BM/75
BNC (M) 75Ω Terminator
Adapter
AD-DM/HF
DVI-D (M) to HDMI (F)
Adapter
AD-BM/2BFY
BNC (M) to 2 BNC (F) "Y"
Adapter
AD-DF/HM
DVI-I (F) to HDMI (M) Adapter
100
AD-BM/2BFT
AD-HF/HF
BNC (M) to 2 BNC (F) "T"
Adapter
HDMI (F/F) Gender Changer
VA-122
AD-HF/HM/RA
BNC (M) to 2 BNC (F)
Adapter
HDMI (F) to HDMI (M) RightAngle Adapter
CABLES & CONNECTORS
INSTALLER SOLUTIONS CATALOG 2014
www.kramerelectronics.com
ADC-DM/DF+GF
HDMI (F) to HDMI (F) RightAngle Gender Changer
DVI-I (M) to DVI-D (F) & 15-pin
HD (F) Adapter Cable
AD-HF/HF/RA-FLAT
ADC-DPM/DF
HDMI (F) to HDMI (F) RightAngle Flat Gender Changer
DisplayPort (M) to DVI−I (F)
Adapter Cable
ADC-DPM/GF
AD-DF/DM/RA
DisplayPort (M) to 15−pin HD
(F) Adapter Cable
DVI-I (F) to DVI-I (M) RightAngle Adapter
ADC-DPM/HF
AD-DF/DF/RA
DisplayPort (M) to HDMI (F)
Adapter Cable
DVI-I (F) to DVI-I (F) Right-Angle
Gender Changer
ADC-MDP/DF
Mini DisplayPort (M) to 15−pin
HD (F) Adapter Cable
AD-DF/DF/RA-FLAT
DVI-I (F) to DVI-I (F) Flat RightAngle Gender Changer
ADC-MDP/GF
Mini DisplayPort (M) to 15−pin
HD (F) Adapter Cable
ADC-DF/HM
DVI-I (F) to HDMI (M) Adapter
Cable
ADC-MDP/HF
Mini DisplayPort (M) to HDMI
(F) Adapter Cable
ADC-DM/HF
www.kramerelectronics.com
DVI-D (M) to HDMI (F) Adapter
Cable
C-D9F/3PM
ADC-DMA/5BF-1
C-UAM/DC35-3
DVI−A (M) to 5 BNC (F)
Adapter Cable
Fiber Optic Power Cable
INSTALLER SOLUTIONS CATALOG 2014
9−pin D−sub (F) to 3−pin
Adapter Cable
CABLES & CONNECTORS
101
CABLES & CONNECTORS
AD-HF/HF/RA
TOOLS
TL-STRIP
CABLES & CONNECTORS
Coax Stripper
This professional Coax Stripping Tool works for all of Kramer's 26/28AWG mini coaxes,
as well as RG-6 and RG-59. Preparing installed wire and cable in video/audio system with
the standard 1/4in format has never been easier or more consistent. One spare blade
cartridge is included.
FEATURES
●●
Spare Blade Cartridge - Extra blade cartridges available separately as TL-STRIP/C.
TL-STRIP/C
Cable Stripper − Extra Blade Cartridge
Extra blade cartridges for TL-STRIP stripping tool.
TL-LCT
Compression Tool for All Kramer Bulk Cables
The Linear Compression Tool is designed for the professional installer and features the
most rugged design in the industry. The solid-steel tool is virtually unbreakable.
FEATURES
●●
●●
●●
●●
●●
●●
●●
Connector Types - BNC, RCA and F radial connectors (to fit mini coax 22/26AWG, RG-59
and RG-6 cables).
Effortless One Step Operation.
Convenient Size - Fits in the palm of your hand.
No Adjustments Required.
Solid-Steel Construction.
Self-Adjusting Design.
Tool Comes With 3 Insert Tips - Gold & silver for RCA, and black for the new right angle
compression connectors.
TL-B/CRIMP
Kramer’s precision Crimping Tool is used for terminating bulk coax cable with Kramer's crimp
connectors. The multi-format die attaches the three most common connector/cable sets used
in professional AV including RG-6, RG-59, and 26/28AWG high-resolution mini coax (RG-179).
FEATURES
Precision Machined Ratchet/Release System.
Consistent & Predictable Operation.
●● Color-Coded Die Openings.
●● Lightweight & Comfortable.
●●
●●
TL-B/REM
Use for inserting and removing BNC connectors in high density or hard-to-reach locations.
12in (30.5cm) long blade.
TL-WS
Cable & Wire Stripper Tool
Kramer’s Wire Stripper Tool is a high-quality, multi-use stripping tool optimized for use in
professional AV system installation.
102
CABLES & CONNECTORS
INSTALLER SOLUTIONS CATALOG 2014
www.kramerelectronics.com
RG‑6 RCA
CABLES & CONNECTORS
RG‑6 BNC
www.kramerelectronics.com
INSTALLER SOLUTIONS CATALOG 2014
CABLES & CONNECTORS
103
CC-BNC/RCA/F
BNC, RCA & F Compression Connectors
CABLES & CONNECTORS
Kramer’s solder-free compression connectors reduce service calls by supplying strong, secure and lasting connections. Crafted to
withstand 80lb (36.3kg) of force, our compression connectors provide full 360° electrical continuity even under the most punishing
conditions. The radial design reduces the possibility of an impedance problem and defeats ingress/egress at the connector. Internal
“O” sealing rings prevent moisture migration, while the large ferrule surface insures proper RF and digital interfaces.
FEATURES
●● One Compression Tool for All Connectors.
●● Color-Coded Connectors - See table below.
●● 5 Connectors Per Package.
MODEL
COLOR
CODE
USE FOR
SIZING
MIN ‑ MAX (In)
MIN ‑ MAX (mm)
CC‑BNC‑6
Green
BNC Compression Connector for
RG‑6 Cable.
Center Conductor
0.0399 ‑ 0.0418
1.0135 ‑ 1.0617
CC‑RCA‑6
Green
RCA Compression Connector for
RG‑6 Cable.
CC‑F6
Green
“F” Type Compression Connector
for RG‑6 Cable.
Dialectric
0.180 ‑ 0.193
4.572 ‑ 4.9022
CC‑BNC‑R6
Green
Right Angle BNC Compression
Connector for RG‑6 Cable.
CC‑RCA‑R6
Green
Right Angle RCA Compression
Connector for RG‑6 Cable
Outer Jacket
0.265 ‑ 0.305
6.731 ‑ 7.747
CC-BNC-59
Red
BNC Compression Connector for
RG‑59 Cable.
Center Conductor
0.0317 ‑ 0.0339 0.8052 ‑ 0.8611
CC-RCA-59
Red
RCA Compression Connector for
RG‑59 Cable.
CC‑F9
Red
“F” Type Compression Connector
for RG‑59 Cable.
Dialectric
0.144 ‑ 0.157
3.6576 ‑ 3.9878
CC-BNC-R59
Red
Right Angle BNC Compression
Connector for RG‑59 Cable
CC-RCA-R59
Red
Right Angle RCA Compression
Connector for RG‑59 Cable
Outer Jacket
0.232 ‑ 0.273
5.8928 ‑ 6.9342
CC-BNC-179
Orange
BNC Compression Connector for
Mini Coax Cable.
Center Conductor
0.015 ‑ 0.025
0.381 ‑ 0.635
CC-RCA-179
Orange
RCA Compression Connector for
Mini Coax Cable.
CC-BNC-R179
Orange
Right Angle BNC Compression
Connector for Mini Coax Cable
CC-RCA-R179
Orange
Right Angle RCA Compression
Connector for Mini Coax Cable
CC-BNC-22
Purple
BNC Compression Connector for
22 AWG Cable.
CC-RCA-22
Purple
RCA Compression Connector for
22 AWG Cable.
104
CABLES & CONNECTORS
Dialectric
0.065 ‑ 0.078
1.651 ‑ 1.9812
Outer Jacket
0.095 ‑ 0.160
2.413 ‑ 4.064
Center Conductor
Dialectric
Outer Jacket
0.015 ‑ 0.025
0.095 ‑ 0.105
0.145 ‑ 0.160
0.381 ‑ 0.635
2.413 ‑ 2.667
3.683 ‑ 4.064
INSTALLER SOLUTIONS CATALOG 2014
KRAMER’S
CABLE
BC‑1X
BC‑1X59,
BCP‑1X59
BC‑2X,
BC‑3X,
BC‑4X,
BC‑5X,
BC‑5X26
BC‑5X5S,
BC‑3X2T7S,
All BCP‑*
www.kramerelectronics.com
CCR-BNC
BNC Crimp Connectors
configurations
DESCRIPTION
CCR-BNC-6
BNC (M) PLUG CRIMP FOR RG-6
CCR-BNC-59
BNC (M) PLUG CRIMP FOR RG-59
CCR-BNCM-179
BNC (M) PLUG CRIMP FOR MINI COAX
CCR-BNCF-179
BNC (F) PLUG CRIMP FOR MINI COAX
CABLES & CONNECTORS
MODEL
CTW-BNC
Neutrik BNC Twist Connector for RG−6
configurations
MODEL
DESCRIPTION
CTW-BNC-6
BNC Twist-on Connector for RG-6 Cable
CCR-RJ45
Shielded CCR−RJ45−TP6 Connectors for CAT 6 Cable (23AWG)
configurations
www.kramerelectronics.com
MODEL
DESCRIPTION
CCR-RJ45-TP6
Crimp Style Shielded RJ-45 Connector for 23 AWG
Twisted Pair Cable (Minimum Purchase = 10X)
INSTALLER SOLUTIONS CATALOG 2014
CABLES & CONNECTORS
105
CON-HD15
15−pin HD Metal Body Connectors
CABLES & CONNECTORS
configurations
MODEL
DESCRIPTION
CON-HD15/H
15-pin HD Hoods for 10mm (0.39in) Cable
CON-HD15/BM
15-pin HD Male Solder Type Connector Body
CON-HD15/BF
15-pin HD Female Solder Type Connector Body
CON-HD15/G
50 Grommet Set to Adapt Hood to 9/8/7/6/5mm
(0.354 to 0.197in) Cables
COLOR RINGS
Kramer’s Color Rings identify the compression connectors and let you retrofit connectors
quickly and easily.
configurations
106
CABLES & CONNECTORS
MODEL
DESCRIPTION
CRC-RED
100 Red Color Rings
CRC-GREEN
100 Green Color Rings
CRC-BLUE
100 Blue Color Rings
CRC-YELLOW
100 Yellow Color Rings
CRC-WHITE
100 White Color Rings
CRC-BLACK
100 White Color Rings
INSTALLER SOLUTIONS CATALOG 2014
www.kramerelectronics.com
MISCELLANEOUS
CABLE PULL SLEEVE
FERRITE CORES
Kramer's snap-on Ferrite Cores help eliminate EMI (electromagnetic interference)
on bulk cables during installation. Available in two sizes, they fit over the cable
jacket or on an individual mini coax.
configurations
MODEL
FER-10
Ferrite Core For 10mm (0.39in) Diameter Cable
FER-3.8
Ferrite Core For 3.8mm (0.15in) Diameter Cable
D
C
www.kramerelectronics.com
DESCRIPTION
FOR BULK CABLE
A
B
INSTALLER SOLUTIONS CATALOG 2014
A
FOR MINI COAX
36.00 ± 1.00mm
B
32.00 ± 1.00mm
C
10.00 ± 0.50mm
3.80 ± 0.30mm
D
20.50 ± 1.00mm
14.50 ± 0.50mm
CABLES & CONNECTORS
25.00 ± 0.50mm
107
CABLES & CONNECTORS
Use Kramer’s Cable Pull Sleeve for easier installation when pulling pre-built cables
into position through walls and other tight spaces to protect the connectors.
The Cable Pull Sleeve is an excellent solution for pulling many types of cable
assemblies including VGA, DVI, 5 BNC, HDMI, Hydra series, etc.
ROOM CONNECTIVITY
ROOM CONNECTIVITY
TABLE CONNECTIONS
Modular Solutions
ENCLOSURE
TBUS-1Axl
ROOM CONNECTIVITY
Table Mount Modular Multi−Connection Solution − Tilt−Up Lid
The TBUS-1Axl is the enclosure of a new modular system with a tilt-up
lid. A complete TBUS system requires the enclosure, an inner frame, a
power socket, inserts and a power cord.
NOTE: The TBUS enclosure, power socket, power cord & inserts are
purchased separately.
FEATURES
●●
Cover - Manually opens & closes.
●●
Inner Frame - 6 different "TIAF" inner frame options are available that can
accommodate a combination of up to 4 power sockets, 6 cable passthrough or connector inserts, 1 long insert and up to 3 Kramer TOOLS.
●●
Power Sockets - 8 different "TS" single and 8 dual power socket options
are available to accommodate the power requirements worldwide.
●●
Power Cord - 8 different "C-AC" single power cords (and 3 "Y" power cords)
for each power socket.
●●
Optional Accessories - TBUS Brackets, K-Able Box Cable Reels, Step-In
Modules and Controllers are available.
●●
UL and CE Qualified.
●●
Connector Depth - Adjustable.
●●
Installation Requirement - Table cutout of 19.1cm x 15.2cm
(7.51in x 5.98in).
●●
Dimensions - 20.5cm x 17cm x 13.2cm (8.1" x 6.7" x 5.2") W, D, H.
●●
Weight - TBUS-1Axl: 1.5kg (3.3lbs) approx.; table clamps: 0.26kg
(0.57lbs); metal template: 0.125kg (0.28lbs).
CONFIGURATIONS:
110
ROOM
CONNECTIVITY
Model
Description
TBUS-1Axl(B)
Enclosure - Black Anodized Aluminum Top
TBUS-1Axl(BC)
Enclosure - Brushed Clear Aluminum Top
INSTALLER
SOLUTIONS
CATALOG
2014
www.kramerelectronics.com
TBUS-3xl
Table Mount Modular Multi−Connection Solution − Tilt−Up Lid
The TBUS-3xl is the enclosure of a new modular system with a tilt-up
lid. A complete TBUS system requires the enclosure, an inner frame, a
power socket, inserts and a power cord.
NOTE: The TBUS enclosure, power socket, power cord & inserts are
purchased separately.
FEATURES
Inner Frame - 3 different "T3F" inner frame options are available that can
accommodate a combination of up to 4 power sockets, 6 cable passthrough or connector inserts, 1 long insert and up to 3 Kramer TOOLS.
●●
Power Sockets - 8 different "TS" single power socket options are available
to accommodate the power requirements worldwide.
●●
Power Cords - 8 different "C-AC" single power cords for each power
socket.
●●
Optional Accessories - TBUS Brackets, K-Able Box Cable Reels, Step-In
Modules and Controllers are available.
●●
Cover - Manually opens & closes.
●●
Connector Depth - Adjustable.
●●
Installation Requirement - Table cutout of 158mm x 123mm (6.23" x 4.85").
●●
Dimensions - Top plate: 17.6cm x 14.0cm (6.9" x 5.5") W, D; Enclosure:
13.6cm x 10.2cm x 13.0cm (5.4" x 4.0" x 5.1") W, D, H.
●●
Weight - 1.02kg (2.25lb) approx.; table clamps: 0.257kg (0.566lbs);
template: 0.125kg (0.275lbs).
CONFIGURATIONS:
www.kramerelectronics.com
INSTALLER
Model
Description
TBUS-3xl(B)
Enclosure - Black Anodized Aluminum Top
TBUS-3xl(BC)
Enclosure - Brushed Clear Aluminum Top
SOLUTIONS
CATALOG
2014
ROOM
CONNECTIVITY
111
ROOM CONNECTIVITY
●●
TBUS-4xl
Table Mount Modular Multi−Connection Solution − Tilt−Up Lid
The TBUS-4xl is the enclosure of a new modular system with a tilt-up
lid. A complete TBUS system requires the enclosure, an inner frame, a
power socket, inserts and a power cord.
NOTE: The TBUS enclosure, power socket, power cord & inserts are
purchased separately.
ROOM CONNECTIVITY
FEATURES
●●
Inner Frame - 2 different "T4F" inner frame options are available that can
accommodate a combination of up to 4 power sockets, 6 cable passthrough or connector inserts, 1 long insert and up to 3 Kramer TOOLS.
●●
Power Sockets - 8 different "TS" single socket options are available to
accommodate the power requirements worldwide.
●●
Power Cord - 8 different "C-AC" single power cords (and 3 "Y" power cords)
for each power socket.
●●
Optional Accessories - TBUS Brackets, K-Able Box Cable Reels, Step-In
Modules and Controllers are available.
●●
Cover - Manually opens & closes.
●●
Connector Depth - Adjustable.
●●
Installation Requirement - Table cutout of 225mm x 123mm
(8.87" x 4.85").
●●
Dimensions - Top plate: 24.3cm x 14.0cm (9.6" x 5.5") W, D; Enclosure:
20.3cm x 10.2cm x 13.0cm (8.0" x 4.0" x 5.1") W, D, H.
●●
Weight - TBUS-4xl: 1.35kg (2.8lbs) approx.; table clamps: 0.25kg
(0.6lbs).
CONFIGURATIONS:
112
ROOM
CONNECTIVITY
Model
Description
TBUS-4xl(B)
Enclosure - Black Anodized Aluminum Top
TBUS-4xl(BC)
Enclosure - Brushed Clear Aluminum Top
INSTALLER
SOLUTIONS
CATALOG
2014
www.kramerelectronics.com
TBUS-5xl
Table Mount Modular Multi−Connection Solution − Manually Retracting Lid
The TBUS-5xl is the enclosure of a new modular system with a
retractable lid. A complete TBUS system requires the enclosure, an inner
frame, a power socket, inserts and a power cord.
NOTE: The TBUS enclosure, power socket, power cord & inserts are
purchased separately.
FEATURES
Inner Frame - 2 different "T5F" inner frame options are available that can
accommodate a combination of up to 4 power sockets, 6 cable passthrough or connector inserts, 1 long insert and up to 3 Kramer TOOLS.
●●
Power Sockets - 8 different "TS" single power socket options are available
to accommodate the power requirements worldwide.
●●
Power Cord - 8 different "C-AC" single power cords for each power socket.
●●
Optional Accessories - TBUS Brackets, K-Able Box Cable Reels, Step-In
Modules and Controllers are available.
●●
Retractable Lid - Manually slides into unit.
●●
Connector Depth - Adjustable.
●●
Installation Requirement - Table cutout of 158mm x 123mm (6.23" x 4.85").
●●
Dimensions - Top plate: 17.6cm x 14.0.4cm (6.9" x 5.5") W, D;
Enclosure: 15.4cm x 10.2cm x 13.0cm (6.1" x 4.0" x 5.1") W, D, H.
●●
Weight - 0.9kg (2.0lbs) approx.; table clamps: 0.25kg (0.55lbs) approx.
CONFIGURATIONS:
www.kramerelectronics.com
INSTALLER
Model
Description
TBUS-5xl(B)
Enclosure - Black Anodized Aluminum Top
TBUS-5xl(BC)
Enclosure - Brushed Clear Aluminum Top
SOLUTIONS
CATALOG
2014
ROOM
CONNECTIVITY
113
ROOM CONNECTIVITY
●●
TBUS-6xl
Table Mount Modular Multi−Connection Solution − Manually Retracting Lid
The TBUS-6xl is the enclosure of a new modular system with a tilt-up
lid. A complete TBUS system requires the enclosure, an inner frame, a
power socket, inserts and a power cord.
NOTE: The TBUS enclosure, power socket, power cord & inserts are
purchased separately.
ROOM CONNECTIVITY
FEATURES
●●
Inner Frame - 3 different "T3F" inner frame options are available that can
accommodate a combination of up to 4 power sockets, 6 cable passthrough or connector inserts, 1 long insert and up to 3 Kramer TOOLS.
●●
Power Sockets - 8 different "TS" single power socket options are available
to accommodate the power requirements worldwide.
●●
Power Cord - 8 different "C-AC" single power cords (and 3 "Y" power cords)
for each power socket.
●●
Optional Accessories - TBUS Brackets, K-Able Box Cable Reels, Step-In
Modules and Controllers are available.
●●
Retractable Lid - Manually slides into unit.
●●
Connector Depth - Adjustable.
●●
Installation Requirement - Table cutout of 225mm x 123mm
(8.87" x 4.85").
●●
Dimensions - Top plate: 24.3cm x 14.0cm (9.6" x 5.5") W, D; Enclosure:
22.1cm x 10.2cm x 13.0cm (8.7" x 4.0" x 5.1") W, D, H.
●●
Weight - 1.35 kg (2.8 lbs) approx.; table clamps: 0.25 kg (0.6 lbs)
approx.
CONFIGURATIONS:
114
ROOM
CONNECTIVITY
Model
Description
TBUS-6xl(B)
Enclosure - Black Anodized Aluminum Top
TBUS-6xl(BC)
Enclosure - Brushed Clear Aluminum Top
INSTALLER
SOLUTIONS
CATALOG
2014
www.kramerelectronics.com
TBUS-10xl
Table Mount Modular Multi−Connection Solution − Manually Retracting Lid
The TBUS-10xl is the enclosure of a new modular system with a manually
retracting lid. A complete TBUS system requires the enclosure, an inner
frame, a power socket, inserts and a power cord.
NOTE: The TBUS enclosure, inner frame, power socket(s), power cord &
inserts are purchased separately.
FEATURES
Cover - Manually opens & closes.
●●
Inner Frames - T10F-22M can accommodate a combination of up to 2
power sockets, 2 inserts, 1 opening for a Kramer MegaTOOL SID-X1;
T10F-33 contains 3 power sockets and 3 inserts.
●●
Power Sockets - 11 different "TS" single and 10 dual power socket options
are available to accommodate the power requirements worldwide.
●●
Power Cord - 8 different "C-AC" single power cords (and 3 "Y" power cords)
for each power socket. UL and CE qualified.
●●
Connector Depth - Adjustable.
●●
Installation Requirement - Table cutout of 245mm x 154mm (9.65" x
6.07").
●●
Dimensions - Top plate: 171.6mm x 261mm (6.8" x 10.3") W, D.
●●
Weight - TBUS-10xl: 1.35kg (2.8lbs) approx.; table clamps: 0.25kg
(0.6lbs) approx.
●●
Accessories - TBUS clamps (part of the TBUS enclosure), cut-out template,
template screws, self-locking ties.
●●
Options - Inner frames, passive wall plates and interfaces, power socket
kits, power cord, T-2INSERT kit, T-RC-8IR kit, T-RC-76 kit, T-RC-78 kit,
Kramer K-Able Box (furniture-mounted cable extension).
CONFIGURATIONS:
www.kramerelectronics.com
INSTALLER
Model
Description
TBUS-10XL(B)
Enclosure - Black Anodized Aluminum Top
TBUS-10XL(BC)
Enclosure - Brushed Clear Aluminum Top
SOLUTIONS
CATALOG
2014
ROOM
CONNECTIVITY
115
ROOM CONNECTIVITY
●●
UTBUS-1xl
Under−the−Table Modular Multi−Connection Solution Enclosure
The UTBUS-1xl is the enclosure of a new modular system. A complete
UTBUS system requires the enclosure, a power socket, inserts and a
power cord.
ROOM CONNECTIVITY
NOTE: The UTBUS enclosure, power socket, power cord & inserts are
purchased separately.
FEATURES
●●
Power Sockets - 8 different "TS" single power socket options are available
to accommodate the power requirements worldwide.
●●
Power Cord - 8 different "C-AC" single power cords for each power socket.
●●
Fixed Connectors - 1 computer graphics on a 15-pin HD, 1 unbalanced
stereo audio on a 3.5mm mini jack.
●●
Insert Slots - 4.
●●
Installation Requirement - Requires 25.0cm x 13.7cm (9.84" x 5.4") of
free space beneath the table.
●●
Weight - 0.6kg (1.32lbs) approx.
CONFIGURATIONS:
116
ROOM
CONNECTIVITY
Model
Description
UTBUS-1xl
Under−the−Table Modular Multi−Connection Solution
Enclosure
INSTALLER
SOLUTIONS
CATALOG
2014
www.kramerelectronics.com
INNER FRAME
T1AF
TBUS−1Axl Inner Frames
The T1AF inner frame comes in six different configurations that can hold
single or double power sockets, single or double inserts, long inserts and
Kramer Tools.
CONFIGURATIONS:
Model
Description
Inner Frames
T1AF-26
1 Double Power Socket Slot
6 Insert Slots (Includes 4 Blank & 2 Cable Pass-Through
Inserts)
T1AF-44
2 Double Power Sockets Slots
4 Insert Slots (Includes 2 Blank & 2 Cable Pass-through
Inserts)
T1AF-14L
1 Single Power Socket Slot
4 Insert Slots (Includes 2 Blank & 2 Cable Pass-through
Inserts)
1 Long Insert Slot
T1AF-14T
1 Single Power Socket Slot
4 Insert Slots (Includes 2 Blank & 2 Cable Pass-Through
Inserts)
1 Slot for 1 Kramer TOOLS
T1AF-1T3
1 Single Power Socket Slot
1 Slot for 3 Kramer TOOLS
T1AF-26
T1AF-44
T1AF-14L
T1AF-14T
T1AF-1T3
www.kramerelectronics.com
1 Single Power Socket Slot
6 Insert Slots (Includes 4 Blank & 2 Cable Pass-Through
Inserts)
INSTALLER
SOLUTIONS
CATALOG
2014
ROOM
CONNECTIVITY
117
ROOM CONNECTIVITY
T1AF-16
T1AF-16
T3F
TBUS−3xl Inner Frames
The T3F inner frame comes in three different configurations that can
hold a single power socket, single or double inserts or fixed cable passthroughs.
CONFIGURATIONS:
Model
ROOM CONNECTIVITY
T3F-1S
T3F-13
Description
Inner Frames
T3F-1S
1
1
1
1
1
Single Power Socket Slot
Fixed 15-pin HD (PC)
Fixed USB-A
Fixed RJ-45 (Ethernet)
Fixed 3.5mm (Audio)
T3F-13
1 Single Power Socket Slot
3 Insert Slots (Includes 2 Blank & 1 Cable Pass-Through
Inserts)
T3F-1C
1 Single Power Socket slot
4 Fixed Cable Pass-Through
T3F-1C
T4F
TBUS−4xl Inner Frames
The T4F inner frame comes in two different configurations that can
hold a single power socket, single or double inserts and standard fixed
connectors.
CONFIGURATIONS:
Model
Description
Inner Frames
T4F-2S
T4F-2S
2
2
2
2
2
Single Power Sockets Slots
Fixed 15-pin HD (PC)
Fixed USB-A
Fixed RJ-45 (Ethernet
Fixed3.5mm (Audio)
T4F-23
2 Single Power Sockets Slot
3 Insert Slots (Includes 2 Blank & 1 Cable Pass-Through
Inserts)
T4F-23
118
ROOM
CONNECTIVITY
INSTALLER
SOLUTIONS
CATALOG
2014
www.kramerelectronics.com
T5F
TBUS−5xl Inner Frames
The T5F inner frame comes in two different configurations that can
hold a single power socket, single or double inserts and standard fixed
connectors.
CONFIGURATIONS:
Model
Description
Inner Frames
T5F-1S
1
1
1
1
1
Power Socket Slot
Fixed 15-pin HD (PC)
Fixed USB-A
Fixed RJ-45 (Ethernet)
3.5mm (Audio)
T5F-13
1 Power Socket Slot
3 Insert Slots (Includes 2 Blank & 1 Cable Pass-Through
Inserts)
T5F-13
T6F
TBUS−6xl Inner Frames
The T6F inner frame comes in three different configurations: two power
sockets and four pairs of pre-built interfaces, two power sockets and
three blank inserts, and three inserts and one MegaTool slot.
CONFIGURATIONS:
Model
Description
Inner Frames
T6F-2S
T6F-2S
2
2
2
2
2
2
T6F-23
2 Single Power Socket Slots
3 Insert Slots (Includes 2 Blank & 1 Cable Pass-Through
Inserts)
T6F-03M
3 Insert Slots (Includes 3 Blank Inserts)
1 Slot for a Kramer MegaTOOL
T6F-23
Single Power Sockets Slots
Insert Slots
Fixed 15-pin HD (PC)
Fixed RJ-45 (Ethernet)
Fixed 3.5mm (Audio
Fixed USB-A
T6F-03M
T10F
TBUS−10xl Inner Frames
The T10F inner frame comes in two different configurations: one with
one dual and one single power sockets, two blank inserts and one cable
pass-through (T10F-33), and one with two single power sockets, one
blank insert, one cable pass-through and a slot for SID-X1 (or Kramer
MegaTOOL) (T10F-22M).
CONFIGURATIONS:
T10F
www.kramerelectronics.com
INSTALLER
Model
Description
T10F-22M
2 Single Power Socket Slots
2 Insert Slots
1 Slot for a Kramer MegaTOOL
SOLUTIONS
CATALOG
2014
ROOM
CONNECTIVITY
119
ROOM CONNECTIVITY
T5F-1S
POWER SOCKET
TS-Power-Socket
TBUS Power Socket Modules
TBUS power sockets are available in single, dual and country-specific
modules.
CONFIGURATIONS:
TS-1U
TS-1US
Model
Description
ROOM CONNECTIVITY
Single Power Socket
TS-1DE
TS-1AU
TS-2U
TS-2US
TS-1U
TBUS Power Socket - Universal
TS-1US
TBUS Power Socket - USA
TS-1DE
TBUS Power Socket - Germany
TS-1FR
TBUS Power Socket - France
TS-1IT
TBUS Power Socket - Italy
TS-1CH
TBUS Power Socket - Switzerland
TS-1AU
TBUS Power Socket - Australia
TS-1IL
TBUS Power Socket Bracket for Legrand Mosaic Sockets
(sockets not included)
TS-1ZA
TBUS Power Socket Bracket - South Africa (socket not
included)
TS-1GB
TBUS Power Socket - Great Britain
Dual Power Socket
TS-2DE
TS-2FR
TS-2IT
TS-2U
TBUS Dual Power Socket - Universal
TS-2US
TBUS Dual Power Socket - USA
TS-2DE
TBUS Dual Power Socket - Germany
TS-2FR
TBUS Dual Power Socket - France
TS-2IT
TBUS Dual Power Socket - Italy
TS-2CH
TBUS Dual Power Socket - Switzerland
TS-2AU
TBUS Dual Power Socket - Australia
TS-2IL
TBUS Power Socket Bracket for 2 Legrand Mosaic Sockets
(sockets not included)
TS-2ZA
TBUS Power Socket Bracket - South Africa (socket not
included)
TS-2GB
TBUS Dual Power Socket - Great Britain
TS-2BR
TBUS Dual Power Socket - Brazil (size of a single power socket)
TS-2AU
POWER CORD
C-AC/POWERCORD
TBUS AC Power Cords
AC power cords for modular TBUS units in a variety of styles.
CONFIGURATIONS:
C-AC/US
Model
Description
C-AC/US
TBUS AC Power Cord - 6ft USA 110V AC
C-AC/EU
TBUS AC Power Cord - Right-Angle Europe 6ft 220V AC
C-AC/UK
TBUS AC Power Cord - UK 6ft 250V AC
C-AC/JP
TBUS AC Power Cord - Japan 6ft 125V AC
C-AC/IL
TBUS AC Power Cord - Israel 6ft 220V AC
C-AC/IN
TBUS AC Power Cord - Right-Angle India 6ft 250V AC
C-AC/CN
TBUS AC Power Cord - Right-Angle China 6ft 250V (10amp)
C-AC/ZA
TBUS AC Power Cord - Right-Angle South Africa 6ft 250V (10amp)
Y-Type
C-AC/Y/EU
120
ROOM
CONNECTIVITY
C-ACY/US
TBUS AC Power Cord Dual Outputs - USA 6ft 110V AC
C-ACY/EU
TBUS AC Power Cord Dual Outputs - Right-Angle Europe
6ft 220V AC
C-ACY/UK
TBUS AC Power Cord Dual Outputs - UK 6ft 240V AC
INSTALLER
SOLUTIONS
CATALOG
2014
www.kramerelectronics.com
CABLE RETRACTORS
K-ABLE-BOX
Cable Retractor
The K-Able Box is a furniture-mounted cable extender, retractor and
housing that is easily installed underneath a table top or in a podium. The
device is available with one of seven cable types and can be mounted in a
variety of positions and configurations for use with the Kramer TBUS line
or independently as a stand-alone product.
FEATURES
Available Cable Types - VGA, VGA and audio, HDMI/Ethernet, and CAT 6
twisted pair. Available soon: audio (3.5mm), USB-A & DVI.
●●
Cable Length - 1.2m (3.9ft).
●●
TBUS Compatibility - TBUS-1A, TBUS-3, TBUS-4, TBUS-5, TBUS-6,
TBUS-10 with WCP, WCP-2 or WCP insert installed.
●●
Mounting Positions - Horizontally or vertically as a stand-alone unit,
vertically in conjunction with the Kramer TBUS range of products, or
vertically in a bank of up to three units. Single mounting bracket included.
CONFIGURATIONS:
Model
Description
K-ABLE-VGA
Retractable VGA (15-pin HD) Cable Reel, 3ft (1m).
K-ABLE-A
Retractable Stereo Audio (3.5mm) Cable Reel, 3ft (1m).
K-ABLE-VGA/A
Retractable VGA (15-pin HD) & Stereo Audio (3.5mm)
Cable Reel, 3ft (1m).
K-ABLE-CAT6
Retractable CAT 6 (RJ-45) Cable Reel, 3ft (1m).
K-ABLE-USB
Retractable USB-A Cable Reel, 3ft (1m).
K-ABLE-H
Retractable HDMI with Ethernet Cable Reel, 3ft (1m).
TECHNICAL SPECIFICATIONS
26.7cm x 21.1cm x 3.7cm (10.5" x 8.3" x 1.5") W, D, H.
1.4kg (3.1lbs) approx.
4 horizontal mount wood screws, cable exit bracket, plastic
friction bushing, single unit vertical mounting bracket,
front pin, rear carriage bolt, nut and washer, 9 vertical
mount/cable exit bracket wood screws.
Vertical mount bracket for 2 units, vertical mount bracket for
3 units.
DIMENSIONS:
WEIGHT:
ACCESSORIES:
OPTIONS:
www.kramerelectronics.com
INSTALLER
SOLUTIONS
CATALOG
2014
ROOM
CONNECTIVITY
121
ROOM CONNECTIVITY
●●
BRACKETS
T-2INSERT
TBUS Bracket to Install 2 Inserts in a Power Socket Opening
ROOM CONNECTIVITY
A bracket for installing two inserts in a power socket opening.
T-TBLANK
TBUS Inner Frame Blank Plate for Kramer TOOLS
A cover plate for TBUS Inner Frames that holds Kramer TOOLS.
NEW
T-RC
TBUS Mounting Bracket to Install Controllers
TBUS Mounting Bracket to install RC-8IR, RC-76R & RC-78R controllers
in TBUS inner frames with a dual-power socket opening.
CONFIGURATIONS:
T-RC-8IR
T-RC-76R
122
ROOM
CONNECTIVITY
Model
Description
T-RC-8IR
TBUS Mounting Bracket to Install RC-8IR
T-RC-76R
TBUS Mounting Bracket to Install RC-76
T-RC-78R
TBUS Mounting Bracket to Install RC-78
T-RC-78R
INSTALLER
SOLUTIONS
CATALOG
2014
www.kramerelectronics.com
FIXED SOLUTIONS
K-POD301
Podium Table Bus
The K-POD301 is a high-quality metal connection box for boardrooms
and conference rooms, especially designed for mounting any 3 gang US
Kramer wall plate device (such as the WP-500) or three RC-3TB remote
control panels on podiums or lecterns. The unit is sturdy, cost-effective
and easy to install.
FEATURES
INSTALLER
Front Panel - Can accept any 3 gang US wall plate device or up to 3
optional RC-3TB remote control panels.
●●
Tie Hole Bars - 2 four-hole bars for attaching cables.
●●
Mounting Holes - 3 holes for mounting the unit on a flat surface (table,
podium, shelf).
●●
Underside Openings - 2 openings for routing cables.
●●
Keyholes - 2 openings for mounting the unit on wall screws.
●●
Single Slot Insert - 1 removable cover for routing cables through the rear
of the box.
●●
Dimensions - 162mm x 121mm x 101mm (6.4" x 4.8" x 4.0") W, D, H.
●●
Weight - 1kg (2.2lbs) approx.
SOLUTIONS
CATALOG
2014
ROOM
CONNECTIVITY
123
ROOM CONNECTIVITY
www.kramerelectronics.com
●●
RTBUS-11
Round Table Mount Multi−Connection Solution − Pneumatic Lid − 88mm Cut−Out
$P8H
The RTBUS-11 is a round, furniture-mounted, connection bus that is
easily installed in a table or podium top. The unit connects AV equipment
to the room’s presentation system.
ROOM CONNECTIVITY
FEATURES
●●
4 Inputs - 15-pin HD, HDMI, 3.5mm, & RJ-45.
●●
Power Input - 110V AC (USA only).
●●
Cover - Pneumatic pop-up lid.
●●
Cutout Size (Mount Dimension) - 88mm diameter.
RTBUS-11
Audio
HDMI or
VGA
VGA
Audio
Ethernet
AC
Power
Laptop
124
ROOM
CONNECTIVITY
INSTALLER
SOLUTIONS
CATALOG
Projector
2014
Power Amplifier
with Speakers
www.kramerelectronics.com
RTBUS-12
Round Table Mount Multi−Connection Solution for SID−X1 − Pneumatic Lid − 88mm Cut−Out
$PF8H!
FEATURES
●●
6 Inputs - 15-pin HD, HDMI, 3.5mm, USB, DP & RJ-45.
●●
Input Select/Step-in Buttons - For step-in switching through the SID-X1.
●●
Slider Switch - For manual/automatic audio.
●●
Cover - Pop-up pneumatic lid.
●●
Cutout Size (Mount Dimension) - 88mm diameter.
UXGA
Computer
Graphics
Source
Audio
DP
Audio
HDMI
SID-X1
Laptop
INSTALLER
SOLUTIONS
CATALOG
HDMI
DVD Player
DP
UXGA
www.kramerelectronics.com
RTBUS-12
2014
RTBUS-12
to SID-X1
Cable
ROOM
CONNECTIVITY
125
ROOM CONNECTIVITY
The RTBUS-12 is an elegant furniture-mounted, round connection bus,
designed to be used with the Kramer SID-X1 Step-In Commander. The
RTBUS-12 features a pneumatic mechanism for pneumatic lifting and
smooth closing of its lid. It is easily installed into a table or podium top,
and its interface enables you to connect any AV input to systems installed
in a room.
RTBUS-21
Round Table Mount Multi−Connection Solution − Pneumatic Lid − 110mm Cut−Out
$P8H
The RTBUS-21 is a round, furniture-mounted, connection bus that is
easily installed in a table or podium top. The unit connects AV equipment
to the room’s presentation system.
ROOM CONNECTIVITY
FEATURES
●●
4 Inputs - 15-pin HD, 3.5mm, RJ-45, HDMI.
●●
Power Input - International and European 220V AC power sockets
available.
●●
Cover - Pneumatic pop-up lid.
●●
Cutout Size (Mount Dimension) - 110mm diameter.
RTBUS-21
Audio
HDMI or
VGA
VGA
Audio
Ethernet
AC
Power
Laptop
126
ROOM
CONNECTIVITY
INSTALLER
SOLUTIONS
CATALOG
Projector
2014
Power Amplifier
with Speakers
www.kramerelectronics.com
NEW
TBUS-201xl
Pop−Up Table Mount Multi−Connection Solution
$P8H
FEATURES
www.kramerelectronics.com
INSTALLER
●●
Pneumatic Lift - Easy opening & closing by pressing down gently on the
cover. When not in use, it lowers flush with the table.
●●
Power Input - Universal, USA, European and many other worldwide power
sockets available.
●●
4 Fixed Inputs - 15-pin HD, HDMI, 3.5mm & Ethernet.
●●
Elegant and Rugged Rectangular Design - The sturdy and attractive
anodized aluminum enclosure provides maximum connectivity in the
smallest possible footprint, and at the same time is cost effective and
easy to install.
●●
Installation - Requires tools and expertise to cut a 133mm x 120mm
(5.2” x 4.7”) rectangular hole in the surface of the furniture. Maximum
table thickness is 7.6cm (3").
SOLUTIONS
CATALOG
2014
ROOM
CONNECTIVITY
127
ROOM CONNECTIVITY
Kramer's TBUS-201xl provides an extremely simple, affordable and
elegant single-push pop-up multi-connection boardroom solution. By
pressing down gently on the lid, the unit opens and closes pneumatically.
TBUS-201xl is fast and easy to install and flexible to configure. It
customizes to your own needs and is intuitive to operate.
WALL PLATES
ROOM CONNECTIVITY
This series includes passive and active wall plate devices for interfacing audio, video, s‑Video and computer graphics video signals to standards
as needed in presentation and other applications. For modular systems, start by choosing one of the frames below (or the TBUS‑1Axl or
TBUS‑3xl) to be populated with insert modules on the following pages.
CATEGORIES
DIMENSIONS (W x H)
SIZE CODE
1 Gang US
69mm x 114.3mm (2.75" x 4.5”)
U
2 Gang US
114.3mm x 114.3mm (4.5” x 4.5”)
U
1 Gang UK/Europe
86mm x 86mm (3.5” x 3.5”)
E/UK
2 Gang UK/Europe
146mm x 86mm (5.7” x 3.5”)
E/UK
1 Gang Belgium/Germany
80mm x 80mm (3.1” x 3.1”)
B/G
2 Gang Germany
151mm x 80mm (71mm between holes)
5.9” x 3.1” (2.8” between holes)
G
2 Gang Belgium
151mm x 80mm (56mm between holes)
5.9” x 3.1” (2.2” between holes)
B
WALL PLATE COLORS
European version
US version
MOST KRAMER WALL PLATES ARE AVAILABLE IN A CHOICE OF EITHER GRAY OR WHITE
128
ROOM
CONNECTIVITY
INSTALLER
SOLUTIONS
CATALOG
2014
www.kramerelectronics.com
FRAMES
FRAME-1G
Frame for Wall Plate Inserts − 1 Gang
Wall Plate Insert Frame
FEATURES
BELGIAN and GERMAN version
EUROPE and UK version
USA Version - Holds 6 wall plate inserts.
●●
International Versions - Hold 4 wall plate inserts.
●●
Wall Plate Size - 2 gang.
ROOM CONNECTIVITY
US version
●●
FRAME-2G
Frame for Wall Plate Inserts − 2 Gang
Wall Plate Insert Frame
FEATURES
●●USA
Version - Holds 6 wall plate inserts.
●●International
●●Wall
Versions - Hold 4 wall plate inserts.
Plate Size - 2 gang.
US version
EUROPE and UK version
GERMAN version
BELGIAN version
WP-3TB
Wall Plate Frame
The WP-3TB Wall Plate Frame houses up to three Kramer
RC-3TB Remote Control Panels. The WP-3TB can be mounted either in
the OWB-3G wall box or in a standard US 3-gang wall opening.
FEATURES
www.kramerelectronics.com
INSTALLER
●●
USA Version - Holds 6 wall plate inserts.
●●
International Versions - Hold 4 wall plate inserts.
●●
Wall Plate Size - 2 gang.
SOLUTIONS
CATALOG
2014
ROOM
CONNECTIVITY
129
FIXED SOLUTIONS
ACTIVE
AV AUDIO & VIDEO
WP-27/WP-28
ROOM CONNECTIVITY
Active Wall Plate − Composite, s−Video, Component Video & Audio Transmitter & Receiver
C-+ro8
The WP-27 and WP-28 are a twisted pair transmitter and receiver for
composite video, s-Video, or component video and unbalanced stereo or
S/PDIF audio signals. The WP-27 converts a single audio and video input
into a twisted pair signal and the WP-28 converts the twisted pair signal
back into the original audio and video formats.
FEATURES
●●
Video Switching - Between either CV and component video or s-Video and
component.
●●
Audio Switching - Between unbalanced stereo and S/PDIF audio.
●●
Power Connect™ System - A single connection to the transmitter or the
receiver powers both units when the devices are within 50m (150ft) of
each other.
●●
System Range - Up to 100m (330ft).
●●
Cable - UTP (unshielded twisted pair) or STP (shielded twisted pair) such
as CAT 5.
●●
Dimensions - 16.2cm x 4.08cm x 11.4cm (6.38" x 1.6" x 4.49") US;
15.1cm x 4.08cm x 8.6cm (5.94" x 1.6" x 3.39") EU W, D, H.
●●
Wall Plate Size - 2 gang EU, 3 gang US.
●●
Optional - RK-121WP 19" rack adapter (for EU size wall plates only).
European version
US version
TECHNICAL SPECIFICATIONS
INPUTS:
European version
US version
130
ROOM
CONNECTIVITY
1 s−Video (Y/C) 1Vpp/75Ω (Y), 0.3Vpp/75Ω (C) on a 4−
pin connector,
1 composite video (CV) 1Vpp/75Ω on an RCA connector,
1 component 1Vpp/75Ω (Y,Pb,Pr) on 3 RCA connectors,
1 S/PDIF (digital audio) on an RCA connector,
1 unbalanced stereo audio on a 3.5mm mini jack
(WP−27);
1 RJ−45 CAT 5 shielded connector (WP−28).
OUTPUTS:
1 RJ−45 CAT 5 shielded connector (WP−27);
1 s−Video (Y/C) 1Vpp/75Ω (Y), 0.3Vpp/75Ω (C)
on a 4−pin connector,
1 composite video (CV) 1Vpp/75Ω on an RCA connector,
1 component 1Vpp/75Ω (Y,Pb,Pr) on 3 RCA connectors,
1 S/PDIF (digital audio) on an RCA connector,
1 unbalanced stereo audio on a 3.5mm mini jack
(WP−28).
RESOLUTION:
Up to UXGA, up to 1080p.
CONTROLS:
Video input selector button, audio input selector button.
AUDIO BANDWIDTH (-3dB): 20Hz to 20kHz @0.5dB.
AUDIO S/N RATIO:
<-80dB.
TOTAL AUDIO GAIN:
Analog to analog: 0dB; analog to S/PDIF: -12dBFS.
COUPLING:
AC.
AUDIO THD+N:
<0.01%.
POWER CONSUMPTION: 12V DC, 200mA (WP−27); 12V DC, 300mA (WP−28).
DIMENSIONS:
16.2cm x 4.08cm x 11.4cm (6.38" x 1.6" x 4.49") US;
15.1cm x 4.08cm x 8.6cm (5.94" x 1.6" x 3.39") EU W, D, H.
WEIGHT:
0.3kg (0.67lbs.) approx.
ACCESSORIES:
Power supply.
INSTALLER
SOLUTIONS
CATALOG
2014
www.kramerelectronics.com
VIDEO ONLY
WV-11N
Active Wall Plate − Composite Video over Twisted Pair Transmitter
B
The WV-11N is a wall plate transmitter for composite video signals.
It converts a composite video input into a twisted pair signal that it
transmits to the WV-12N receiver.
●●
Front Panel Connection - BNC (F) input.
●●
Rear Panel Connections - 3-pole and 2-pole terminal block output.
●●
Level (Gain) and EQ (Peaking) Controls.
●●
Dimensions - 6.9cm x 4.0cm x 11.4cm (2.71" x 1.57" x 4.49") US;
8.6cm x 4.0cm x 8.6cm (3.39" x 1.57" x 3.39") or 8cm x 4.0cm x 8cm
(3.15" x 1.57" x 3.15") EU W, D, H.
●●
Wall Plate Size - 1 gang EU/US.
●●
Optional - RK-121WP 19" rack adapter (for EU size wall plates only).
US version
European version
WV-12N
Active Wall Plate − Composite Video over Twisted Pair Receiver
B
The WV-12N is a wall plate receiver for composite video signals.
It receives a twisted pair signal from the WV-11N transmitter that it
converts back into a composite video signal.
FEATURES
●●
Front Panel Connection - BNC (F) input.
●●
Rear Panel Connections - 3-pole and 2-pole terminal block input.
●●
Level (Gain) and EQ (Peaking) Controls.
●●
Dimensions - 6.9cm x 4.0cm x 11.4cm (2.71" x 1.57" x 4.49") US;
8.6cm x 4.0cm x 8.6cm (3.39" x 1.57" x 3.39") or 8cm x 4.0cm x 8cm
(3.15" x 1.57" x 3.15") EU W, D, H.
●●
Wall Plate Size - 1 gang EU/US.
●●
Optional - RK-121WP 19" rack adapter (for EU size wall plates only).
US version
European version
WV-20N
Active Wall Plate − Composite Video over Twisted Pair Transmitter & 1:2 Distribution Amplifier
B
The WV-20N is a wall plate transmitter and distribution amplifier for
composite video signals. It converts a composite video input to two twisted
pair signals that it transmits to two WV-12N twisted pair receivers.
FEATURES
●●
Front Panel Connection - BNC (F) input.
●●
Rear Panel Connections - 4-pole terminal block outputs.
●●
Level (Gain) and EQ (Peaking) Controls.
●●
Dimensions - 6.9cm x 4.0cm x 11.4cm (2.71" x 1.57" x 4.49") US;
8.6cm x 4.0cm x 8.6cm (3.39" x 1.57" x 3.39") or 8cm x 4.0cm x 8cm
(3.15" x 1.57" x 3.15") EU W, D, H.
●●
Wall Plate Size - 1 gang EU/US.
●●
Optional - RK-121WP 19" rack adapter (for EU size wall plates only).
US version
European version
www.kramerelectronics.com
INSTALLER
SOLUTIONS
CATALOG
2014
ROOM
CONNECTIVITY
131
ROOM CONNECTIVITY
FEATURES
AUDIO ONLY
WA-20N
Active Wall Plate − RCA Unbalanced Stereo Audio over Twisted Pair Receiver
ROOM CONNECTIVITY
so
The WA-20N is a wall plate receiver for unbalanced stereo audio signals.
It receives a twisted pair signal from a WA-23N transmitter that it
converts back into an unbalanced stereo audio output.
FEATURES
US version
●●
Front Panel Connections - 2 RCA (F) connectors.
●●
Rear Panel Connections - 6-pole terminal block input.
●●
Termination Switch - Allows operation of multiple WA-20Ns from a
common source.
●●
Dimensions - 6.9cm x 4.0cm x 11.4cm (2.71" x 1.57" x 4.49") US;
8.6cm x 4.0cm x 8.6cm (3.39" x 1.57" x 3.39") or 8cm x 4.0cm x 8cm
(3.15" x 1.57" x 3.15") EU W, D, H.
●●
Wall Plate Size - 1 gang EU/US.
●●
Optional - RK-121WP 19" rack adapter (for EU size wall plates only).
European version
WA-21N
Active Wall Plate − 3.5mm Unbalanced Stereo Audio over Twisted Pair Transmitter
8v
The WA-21N is a wall plate transmitter for unbalanced stereo audio
signals. It converts an unbalanced stereo audio input to a balanced
stereo, twisted pair signal that it transmits to a WA-22N receiver.
FEATURES
●●
Front Panel Connection - 3.5mm mini jack (F) input.
●●
Rear Panel Connections - 6-pole terminal block output.
●●
Audio Level Controls - Left & right.
●●
Dimensions - 6.9cm x 4.0cm x 11.4cm (2.71" x 1.57" x 4.49") US;
8.6cm x 4.0cm x 8.6cm (3.39" x 1.57" x 3.39") or 8cm x 4.0cm x 8cm
(3.15" x 1.57" x 3.15") EU W, D, H.
●●
Wall Plate Size - 1 gang EU/US.
●●
Optional - RK-121WP 19" rack adapter (for EU size wall plates only).
US version
European version
TECHNICAL SPECIFICATIONS
INPUT:
OUTPUT:
BANDWIDTH (-3dB):
S/N RATIO:
CONTROLS:
COUPLING:
AUDIO THD + NOISE:
AUDIO 2nd HARMONIC:
POWER CONSUMPTION:
DIMENSIONS:
OPTIONS:
132
ROOM
CONNECTIVITY
INSTALLER
SOLUTIONS
1 unbalanced stereo audio on a 3.5mm mini jack.
1 CAT 5 differential stereo on a 6−pin terminal block.
>100kHz.
80dB.
Level: −30dB to 6dB.
AC.
0.05% @1kHz.
0.005% @1kHz.
12V DC, 30mA.
6.9cm x 4.0cm x 11.4cm (2.71" x 1.57" x 4.49") US;
8.6cm x 4.0cm x 8.6cm (3.39" x 1.57" x 3.39") or
8cm x 4.0cm x 8cm (3.15" x 1.57" x 3.15") EU W, D, H.
RK−121WP 19" rack adapter.
CATALOG
2014
www.kramerelectronics.com
WA-22N
Active Wall Plate − 3.5mm Unbalanced Stereo Audio over Twisted Pair Receiver
8v
The WA-22N is a wall plate receiver for unbalanced stereo audio signals.
It receives a balanced stereo audio, twisted pair signal from a WA-21N
transmitter that it converts back into an unbalanced stereo audio output.
FEATURES
Front Panel Connection - 3.5mm mini jack (F) output.
●●
Rear Panel Connections - 6-pole and 2-pole terminal block input.
●●
Termination Switch - Allows operation of multiple WA-22Ns from a
common source.
US version
●●
Audio Level Controls - Left & right.
European version
●●
Dimensions - 6.9cm x 4.0cm x 11.4cm (2.71" x 1.57" x 4.49") US;
8.6cm x 4.0cm x 8.6cm (3.39" x 1.57" x 3.39") or 8cm x 4.0cm x 8cm
(3.15" x 1.57" x 3.15") EU W, D, H.
●●
Wall Plate Size - 1 gang EU/US.
●●
Optional - RK-121WP 19" rack adapter (for EU size wall plates only).
TECHNICAL SPECIFICATIONS
INPUT:
OUTPUT:
MAX. OUTPUT LEVEL:
BANDWIDTH (-3dB):
S/N RATIO:
COUPLING:
AUDIO THD + NOISE:
AUDIO 2nd HARMONIC:
POWER CONSUMPTION:
DIMENSIONS:
OPTIONS:
1 RJ−45 CAT 5 differential stereo on 6 pin terminal block.
1 audio stereo on 3.5mm phone jack.
5Vpp.
>100kHz.
80dB.
AC.
0.05% @1kHz.
0.005% @1kHz.
12V DC, 30mA.
6.9cm x 4.0cm x 11.4cm (2.71" x 1.57" x 4.49") US;
8.6cm x 4.0cm x 8.6cm (3.39" x 1.57" x 3.39") or 8cm x
4.0cm x 8cm (3.15" x 1.57" x 3.15") EU W, D, H.
RK−121WP 19" rack adapter.
WA-23N
Active Wall Plate − RCA Unbalanced Stereo Audio over Twisted Pair Transmitter
sov
The WA-23N is a wall plate transmitter for unbalanced stereo audio
signals. It converts an unbalanced stereo audio input to a balanced
stereo, twisted pair signal that it transmits to a WA-20N receiver.
FEATURES
●●
Front Panel Connections - 2 RCA (F) connectors.
●●
Rear Panel Connections - 6-pole and 2-pole terminal block output.
●●
Audio Level Controls - Left & right.
●●
Dimensions - 6.9cm x 4.0cm x 11.4cm (2.71" x 1.57" x 4.49") US;
8.6cm x 4.0cm x 8.6cm (3.39" x 1.57" x 3.39") or 8cm x 4.0cm x 8cm
(3.15" x 1.57" x 3.15") EU W, D, H.
●●
Wall Plate Size - 1 gang EU/US.
●●
Optional - RK-121WP 19" rack adapter (for EU size wall plates only).
US version
European version
www.kramerelectronics.com
INSTALLER
SOLUTIONS
CATALOG
2014
ROOM
CONNECTIVITY
133
ROOM CONNECTIVITY
●●
COMPUTER (15-PIN HD)
VPM-2
Active Wall Plate − Computer Graphics Video Line Driver & Insert Frame
$ []{_
The VPM-2 is a wall plate line driver for computer graphics video signals
with resolutions up to and exceeding UXGA. Multiple units can be
connected to a Kramer switcher (such as the VP-81xl).
ROOM CONNECTIVITY
FEATURES
●●
High Bandwidth - 380MHz (-3dB).
●●
HDTV Compatible.
●●
Front Panel Connection - 15-pin HD input.
●●
Rear Panel Connection - 15-pin HD output.
●●
Looping Input.
●●
Remote Switcher Input Control - Contact closure sent to Kramer switcher
(such as VP-8xl) to activate input from wall plate.
●●
ID Bit Control.
●●
EQ (Peaking) Control.
●●
Auxiliary Inputs - 3 removable panels that can be replaced with passive
Kramer “WP” series wall plate input modules.
●●
Dimensions - 21.1cm x 2.5cm x 11.4cm (8.3" x 0.98" x 4.49") US;
18.15cm x 2.5cm x 9.55cm (7.15" x 0.98" x 3.76") EU W, D, H.
●●
Wall Plate Size - 4 gang EU/US.
TECHNICAL SPECIFICATIONS
Looping analog red, green, blue signals − 0.7Vpp/75Ω,
H & V sync, TTL level, on 15−pin HD (F) connectors.
1 analog red, green (with or without composite sync),
blue signals: 0.7Vpp/75Ω; H & V syncs −TTL level (Hi−Z
load) or analog level (75Ω load) on a 15−pin HD (F)
connector.
INPUT:
OUTPUTS:
VIDEO BANDWIDTH:
DIFF. GAIN:
DIFF. PHASE:
K-FACTOR:
VIDEO S/N RATIO:
CONTROL:
POWER CONSUMPTION:
DIMENSIONS:
WEIGHT:
ACCESSORIES:
134
ROOM
CONNECTIVITY
INSTALLER
SOLUTIONS
380MHz (−3dB).
0.95%.
0.35Deg.
0.05%.
73.4dB.
Cable EQ. control: 0 to +10dB @5MHz; ID bit switch,
remote switcher activating switch.
1.4Vpp.
21.1cm x 11.4cm (8.31” x 4.49”) W, H (US);
18.2cm x 9.55cm (7.17” x 3.76”) W, H (EU).
0.4kg (0.88 lbs) approx.
Power supply.
CATALOG
2014
www.kramerelectronics.com
WPN-11
Active Wall Plate − Computer Graphics Video & Component Video Transmitter
+ % []{_
The WPN-11 is a wall plate transmitter for computer graphics video
with resolutions up to and exceeding UXGA, component video, s-Video
(Y/C) or composite video signals. It is used in conjunction with a
WPN-12 receiver.
FEATURES
HDTV Compatible.
●●
High Bandwidth - 450MHz (-3dB).
●●
Front Panel Connections - 1 15-pin HD (F) and 3 RCA (F) for component
video, s-Video (Y/C) or composite video inputs.
●●
Rear Panel Connections - Terminal block output.
●●
Control - Input selection.
●●
Dimensions - 16.2cm x 4.3cm x 11.4cm (6.38" x 1.69" x 4.49") US;
15.1cm x 4.3cm x 8.6cm (5.94" x 1.69" x 3.39") EU W, D, H.
●●
Wall Plate Size - 2 gang EU, 1 gang US.
●●
Optional - RK-121WP 19" rack adapter (for EU size wall plates only).
European version
US version
TECHNICAL SPECIFICATIONS
INPUTS:
OUTPUT:
MAX. OUTPUT LEVEL:
BANDWIDTH:
DIFF. GAIN:
DIFF. PHASE:
K-FACTOR:
S/N RATIO:
CROSSTALK (all hostile):
COUPLING:
POWER CONSUMPTION:
DIMENSIONS:
WEIGHT:
ACCESSORIES:
OPTIONS:
www.kramerelectronics.com
INSTALLER
SOLUTIONS
CATALOG
2014
1 XGA on a 15−pin HD (F) connector;
1 composite video 1Vpp/75Ω,
1 s−Video, 1Vpp/75Ω (Y), 0.3Vpp/75Ω (C),
YUV/RGB on RCA connectors.
Line out on terminal block connectors.
2.6Vpp.
450MHz (−3dB), fully loaded.
0.05%.
0.05Deg.
<0.05%.
74dB.
-56dB.
DC.
12V DC, 110mA.
16.2cm x 4.3cm x 11.4cm (6.38" x 1.69" x 4.49") US;
15.1cm x 4.3cm x 8.6cm (5.94" x 1.69" x 3.39") EU W,
D, H.
0.3kg (0.67lbs) approx.
Power supply.
RK−2WP 19" rack adapter.
ROOM
CONNECTIVITY
135
ROOM CONNECTIVITY
●●
WPN-12
Active Wall Plate − Computer Graphics Video & Component Video Receiver
+ % []{_
The WPN-12 is a wall plate receiver for computer graphics video with
resolutions up to and exceeding UXGA, component video, s-Video (Y/C)
or composite video signals. It is used in conjunction with a WPN-11
transmitter.
ROOM CONNECTIVITY
FEATURES
European version
US version
●●
HDTV Compatible.
●●
High Bandwidth - 450MHz (-3dB).
●●
Front Panel Connections - 1 15-pin HD (F) and 3 RCA (F) for component
video, s-Video (Y/C) or composite video outputs.
●●
Rear Panel Connections - Terminal block input.
●●
Dimensions - 16.2cm x 4.3cm x 11.4cm (6.38" x 1.69" x 4.49") US;
15.1cm x 4.3cm x 8.6cm (5.94" x 1.69" x 3.39") EU W, D, H.
●●
Wall Plate Sizes - 2 gang EU, 1 gang US.
●●
Optional - RK-121WP 19" rack adapter (for EU size wall plates only).
TECHNICAL SPECIFICATIONS
INPUT:
OUTPUTS:
INPUT from line on terminal block connectors.
1 XGA on a 15−pin HD (F) connector;
1 composite video 1Vpp/75Ω,
1 s−Video, 1Vpp/75Ω (Y), 0.3Vpp/75Ω (C), YUV/RGB on
RCA connectors.
MAX. OUTPUT LEVEL:
BANDWIDTH :
DIFF. GAIN:
DIFF. PHASE:
K-FACTOR:
S/N RATIO:
CROSSTALK (all hostile):
COUPLING:
POWER CONSUMPTION:
DIMENSIONS:
2.6Vpp.
450MHz (−3dB), fully loaded.
0.05%.
0.05Deg.
<0.05%.
74dB.
-56dB.
DC.
12V DC, 110mA.
16.2cm x 4.3cm x 11.4cm (6.38" x 1.69" x 4.49") US;
15.1cm x 4.3cm x 8.6cm (5.94" x 1.69" x 3.39") EU W, D, H.
0.3kg (0.67lbs) approx.
Power supply.
RK−2WP 19" rack adapter.
WEIGHT:
ACCESSORIES:
OPTIONS:
136
ROOM
CONNECTIVITY
INSTALLER
SOLUTIONS
CATALOG
2014
www.kramerelectronics.com
WP-101
Active Wall Plate − Computer Graphics Video and Stereo Audio Line Driver
a $ 8 v A []{_
The WP-101 is a wall plate line driver for computer graphics video (up
to UXGA) and unbalanced stereo signals. The unit outputs balanced and
unbalanced stereo audio and RGBHV video signals.
FEATURES
HDTV Compatible.
●●
High Video Bandwidth - 380MHz (-3dB).
●●
Front Panel Connections - 1 UXGA input on a 15-pin HD (F) connector,
1 unbalanced stereo audio on a 3.5mm mini jack.
●●
Rear Panel Connections - Audio outputs: 1 balanced and 1 unbalanced
stereo on an 8-pin terminal block; 1 RGBHV component video output on a
9-pin terminal block or on 5 BNC cables.
●●
EQ (Peaking) Control.
●●
EDID Handling - Captures EDID automatically or has 16 preset EDID
settings.
●●
Dimensions - 114.3mm x 114.3mm (4.5” x 4.5") W, H.
●●
Wall Plate Size - 2 gang US.
US version
TECHNICAL SPECIFICATIONS
1 UXGA on a 15−pin HD (F) connector;
1 unbalanced stereo audio on a 3.5mm mini jack;
1 12V DC power on 2−pin spring−loaded terminal block.
1 balanced and 1 unbalanced audio on an 8−pin spring−
loaded terminal block;
1 RGBHV component video on a 9−pin spring−loaded
terminal block or on 5 BNC cables.
INPUTS:
OUTPUTS:
Video: 1.7Vpp;
Audio: 8.5Vpp unbalanced, 16.6Vpp balanced.
BANDWIDTH (-3dB):
Video: 380MHz; Audio: >20kHz.
DIFF. GAIN:
0.08%.
DIFF. PHASE:
0.05Deg.
K-FACTOR:
0.2%.
S/N RATIO:
Video: 68dB @5MHz; Audio: 87dB unbalanced, 85dB
balanced.
CROSSTALK (all hostile): Audio: −51dB (from video).
CONTROLS:
0 to 10dB equalization @50MHz.
COUPLING:
Video: DC; Audio: Input AC, Output DC.
AUDIO THD + NOISE:
0.01%.
AUDIO 2nd HARMONIC: Unbalanced 0.003%, balanced 0.001%.
POWER CONSUMPTION: 12V DC 80mA.
DIMENSIONS:
2 gang US, 114.3mm x 114.3mm (4.5" x 4.5") W, H.
WEIGHT:
0.14kg (0.31lbs) approx.
ACCESSORIES:
Power supply.
OPTIONS:
MAX. OUTOUT LEVEL:
www.kramerelectronics.com
INSTALLER
SOLUTIONS
CATALOG
2014
ROOM
CONNECTIVITY
137
ROOM CONNECTIVITY
●●
WP-110
Active Wall Plate − Computer Graphics Video Transmitter
ROOM CONNECTIVITY
% r []
The WP-110 is a wall plate transmitter for computer graphics video
signals with resolutions up to and exceeding UXGA. It converts a
computer graphics video signal into a twisted pair signal that it
transmits to the TP-120 receiver or other compatible Kramer
receiver.
FEATURES
●●Max.
Resolution - WUXGA & 1080p.
●●HDTV
Compatible.
●●Power
Connect™ System - A single connection to the transmitter
or the receiver powers both units when the devices are within 50m
(150ft) of each other. All the system units must have the Power
Connect system to use this feature.
US version
European version
●●Advanced
Sync Processing - Ensures compatibility with a wide range
of computers.
●●Front
Panel Connection - 15-pin HD (F) input.
●●Rear
Panel Connection - RJ-45 output.
●●Sync
Polarity Settings - H & V switches for improved display
compatibility with the CAT 5 outputs.
●●System
Range - Up to 100m (320ft).
●●Cable
- UTP (unshielded twisted pair) or STP (shielded twisted pair)
such as CAT 5.
●●Dimensions
- 6.9cm x 4.1cm x 11.4cm (2.71" x 1.63" x 4.49") US;
8.6cm x 4.1cm x 8.6cm (3.39" x 1.63" x 3.39") and 8cm x 4.1cm x
8cm (3.15" x 1.63" x 3.15") EU W, D, H.
●●Wall
Plate Size - 1 gang EU/US.
●●Optional
- RK-121WP 19" rack adapter (for EU size wall plates only).
TECHNICAL SPECIFICATIONS
INPUT:
OUTPUTS:
MAX. RESOLUTION:
DIFF. GAIN:
DIFF. PHASE:
K-FACTOR:
S/N RATIO:
COUPLING:
POWER CONSUMPTION:
DIMENSIONS:
OPTIONS:
WEIGHT:
138
ROOM
CONNECTIVITY
INSTALLER
SOLUTIONS
CATALOG
1 VGA/UXGA on a 15−pin HD connector.
1 RJ−45 LINE OUT connector.
WUXGA & 1080p.
2.9% (worst case).
0.3Deg (worst case).
<0.05%.
69dB (worst case).
AC.
12V DC, 60mA.
6.9cm x 4.1cm x 11.4cm (2.71" x 1.63" x 4.49") US;
8.6cm x 4.1cm x 8.6cm (3.39" x 1.63" x 3.39") and
8cm x 4.1cm x 8cm (3.15" x 1.63" x 3.15") EU W,
D, H.
RK−121WP 19" rack adapter.
0.14kg (0.31lbs) approx.
2014
www.kramerelectronics.com
WP-120
Active Wall Plate − Computer Graphics Video Receiver
% r []
The WP-120 is a wall plate receiver for computer graphics video signals
with resolutions up to UXGA. It receives a twisted pair signal from the
PT-110 transmitter (or other compatible Kramer transmitter) and
converts it back into a computer graphics video signal.
FEATURES
European version
HDTV Compatible.
●●
Resolution - WUXGA & 1080p.
●●
Twisted Pair Input - RJ-45 connector.
●●
Level (Gain) and EQ (Peaking) Controls.
●●
Sync Polarity Settings - H & V switches for improved monitor compatibility
with the CAT 5 outputs.
●●
System Range - Up to 100m (320ft), greater distances possible depending
on resolution and cable.
●●
Cable - UTP (unshielded twisted pair) or STP (shielded twisted pair) such
as CAT 5.
●●
Power Connect™ System - A single connection to the transmitter or the
receiver powers both units when the devices are within 150ft (50m) of
each other.
●●
Dimensions - 6.9cm x 4.1cm x 11.4cm (2.71" x 1.63" x 4.49") US;
8.6cm x 4.1cm x 8.6cm (3.39" x 1.63" x 3.39") and 8cm x 4.1cm x 8cm
(3.15" x 1.63" x 3.15") EU W, D, H.
●●
Wall Plate Size - 1 gang EU/US.
●●
Optional - RK-121WP 19" adapter (for EU size wall plates only).
TECHNICAL SPECIFICATIONS
INPUT:
OUTPUT:
MAX. RESOLUTION:
MAX. OUTPUT LEVEL:
DIFF. GAIN:
DIFF. PHASE:
K-FACTOR:
S/N RATIO:
CONTROLS:
COUPLING:
POWER CONSUMPTION:
DIMENSIONS:
WEIGHT:
ACCESSORIES:
OPTIONS:
www.kramerelectronics.com
INSTALLER
SOLUTIONS
CATALOG
2014
1 RJ−45 LINE IN connector.
1 XGA on a 15−pin HD (F) connector.
WUXGA & 1080p.
1.5Vpp.
2.7%.
0.2Deg.
<0.1%.
61dB.
Level: −9.4dB to +2.2dB; EQ.: 0dB to +30.9dB.
DC.
12V DC, 190mA.
6.9cm x 4.1cm x 11.4cm (2.71" x 1.63" x 4.49") US;
8.6cm x 4.1cm x 8.6cm (3.39" x 1.63" x 3.39") and
8cm x 4.1cm x 8cm (3.15" x 1.63" x 3.15") EU W, D, H.
0.14kg (0.31lbs) approx.
Power supply.
RK−121WP 19" rack adapter.
ROOM
CONNECTIVITY
139
ROOM CONNECTIVITY
US version
●●
WP-121
Active Wall Plate − Computer Graphics Video & Stereo Audio over Twisted Pair Transmitter with EDID
% r s 8 []{_
The WP-121 is a wall plate transmitter for computer graphics video
signals up to and exceeding UXGA and unbalanced stereo audio. It
converts the input signals into a twisted pair signal that it transmits to a
compatible twisted pair receiver. The WP-121 is a US model.
ROOM CONNECTIVITY
FEATURES
European version
●●
HDTV Compatible.
●●
Max. Resolution - UXGA & 1080p.
●●
EDID Capture - Copies and stores the EDID from a display device.
●●
Power Connect™ System - A single connection to the transmitter or the
receiver powers both units when the devices are within 50m (150ft) of
each other.
●●
System Range - Up to 100m (320ft).
●●
Cable - UTP (unshielded twisted pair) or STP (shielded twisted pair) such
as CAT 5.
●●
Twisted Pair Connectors - RJ-45 or 9-pin terminal block connectors.
●●
Dimensions - 11.4cm x 3.5 cm x 11.4cm (4.49" x 1.4" x 4.49") W, D, H (US);
15.2cm x 3.5cm x 8.0/8.6cm (5.98" x 1.4" x 3.15/3.39") W, D, H (EU).
●●
Wall Plate Size - 2 gang EU/US.
●●
Optional - RK-121WP 19" rack adapter (for EU size wall plates only).
TECHNICAL SPECIFICATIONS
INPUTS:
OUTPUTS:
MAX. OUTOUT LEVEL:
RESOLUTION:
AUDIO BANDWIDTH:
DIFF. GAIN:
DIFF. PHASE:
K-FACTOR:
S/N RATIO:
COUPLING:
AUDIO THD + NOISE:
AUDIO 2nd HARMONIC:
POWER CONSUMPTION:
DIMENSIONS:
WEIGHT:
ACCESSORIES:
OPTIONS:
140
ROOM
CONNECTIVITY
INSTALLER
SOLUTIONS
1 UXGA on a 15−pin HD (F) connector;
1 unbalanced stereo audio on a 3.5mm mini jack.
1 STP on an 9−pin terminal block; 1 STP on an
RJ−45 connector.
Video: 2Vpp, Audio: 2.8Vpp.
Up to UXGA, 1080p.
18kHz.
1.8%.
0.3Deg.
<0.05%.
Video: 60dB @5MHz, Audio: 71dB @1kHz.
Video: AC, Audio: AC.
0.07%.
0.001%.
12V DC, 340mA (feeding TP−112 or TP−122−od
receiver).
2 gang USA: 11.4cm x 3.5 cm x 11.4cm
(4.49" x 1.4" x 4.49") W, D, H;
2 gang Europe: 15.2cm x 3.5cm x 8.0/8.6cm
(5.98" x 1.4" x 3.15/3.39") W, D, H.
0.14kg (0.31lbs) approx.
Power supply.
RK−2WP 19" rack adapter.
CATALOG
2014
www.kramerelectronics.com
WP-209
Active Wall Plate − Computer Graphics Video Line Driver with Composite, Stereo Audio & RJ−45 Pass−Through
C $ o 8 A H []{_
The WP-209 is a wall plate line driver for computer graphics video,
composite video, stereo audio and network signals. It provides controls
to compensate for signal losses inherent in long cable runs.
FEATURES
US version
HDTV Compatible.
●●
Computer Graphics Resolution.
●●
Front Panel Connections - 1 UXGA with loop on a 15-pin HD connector,
1 unbalanced stereo audio on a 3.5mm mini jack; 1 composite video
pass-through on an RCA connector, 1 unbalanced stereo pass-through
on 2 RCA connectors, 1 Ethernet pass-through on an RJ-45 connector.
●●
Rear Panel Connections - 1 UXGA on a 15-pin HD connector mounted to
a short and extremely flexible cable, 1 balanced stereo audio on a 5-pin
terminal block, 3 RCA (F) and 1 RJ-45 pass-through.
●●
Level (Gain) & EQ (Peaking) Control.
●●
Audio Level Controls - Left & right.
●●
Dimensions - 11.4cm x 3.3cm x 11.4cm (4.49" x 1.3" x 4.49") US;
15.2cm x 3.3cm x 8.6cm (5.98" x 1.3" x 3.39") EU W, D, H.
●●
Wall Plate Size - 2 gang EU/US.
●●
Optional - RK-121WP 19" rack adapter (for EU size wall plates only).
TECHNICAL SPECIFICATIONS
INPUTS:
OUTPUTS:
MAX. OUTPUT LEVEL:
AUDIO BANDWIDTH:
RESOLUTION:
DIFF. GAIN:
DIFF. PHASE:
K-FACTOR:
AUDIO 2nd HARMONIC:
AUDIO THD + NOISE:
S/N RATIO:
CROSSTALK (all hostile):
CONTROLS:
COUPLING:
POWER CONSUMPTION:
DIMENSIONS:
WEIGHT:
ACCESSORIES:
www.kramerelectronics.com
INSTALLER
SOLUTIONS
CATALOG
2014
1 UXGA with loop on a 15−pin HD connector;
1 unbalanced stereo audio on a 3.5mm mini jack;
1 composite video pass−through on an RCA connector;
1 unbalanced stereo pass−through on 2 RCA
connectors;
1 Ethernet pass−through on an RJ−45 connector.
1 UXGA on a 15−pin HD connector and cable;
1 balanced stereo audio on a 5−pole terminal block.
UXGA: 2.3Vpp; Audio: 6.8Vpp.
>100kHz (−3dB).
Up to UXGA, 1080p.
2.73%,
0.09Deg.
0.1%.
0.003%.
0.018%.
Video: 71dB; Audio: 85dB.
Audio: <-32dB.
UXGA level: -7.5dB to +4.5dB;
UXGA EQ. level: 0dB to +23dB;
Audio level left and right controls: -76dB to +6.2dB.
Video: DC; Audio: Input: AC, Output: DC.
12V DC, 171mA.
11.4cm x 3.3cm x 11.4cm (4.49" x 1.3" x 4.49") US;
15.2cm x 3.3cm x 8.6cm (5.98" x 1.3" x 3.39") EU
W, D, H.
0.3kg (0.67lbs) approx.
Power supply.
ROOM
CONNECTIVITY
141
ROOM CONNECTIVITY
European version
●●
WP-210
Active Wall Plate − Computer Graphics Video to 5 BNC Line Amplifier
a % []{_
The WP-210 is a wall plate line driver for computer graphics video
signals with resolutions up to and exceeding UXGA. It provides controls
to compensate for signal losses inherent in long cable runs.
ROOM CONNECTIVITY
FEATURES
US version
European version
●●
HDTV Compatible.
●●
High Bandwidth - 400MHz (-3dB).
●●
Advanced Sync Processing - For compatibility with a wide range of
computers.
●●
Front Panel Connections - Looping analog red, green, blue signals on
15-pin HD (F) connectors.
●●
Rear Panel Connection - 1 RGBHV on 5 BNC connectors.
●●
Input Signal Termination.
●●
Selectable Sync Input Impedance.
●●
ID Bit Control.
●●
EQ (Peaking) Control.
●●
Dimensions - 6.9cm x 6.2cm x 11.4cm (2.71" x 2.44" x 4.49") US;
15.1cm x 3.98cm x 8.6cm (5.94" x 1.57" x 3.39") EU W, D, H.
●●
Wall Plate Size - 2 gang EU, 1 gang US.
●●
Optional - RK-121WP 19" rack adapter (for EU size wall plates only).
TECHNICAL SPECIFICATIONS
INPUT:
OUTPUT:
MAX. OUTPUT LEVEL:
BANDWIDTH:
DIFF. GAIN:
DIFF. PHASE:
K-FACTOR:
S/N RATIO:
CONTROLS:
COUPLING:
POWER CONSUMPTION:
DIMENSIONS:
WEIGHT:
OPTIONS:
142
ROOM
CONNECTIVITY
INSTALLER
SOLUTIONS
Analog red, green, blue signals with loop, 0.7Vpp/75Ω,
H and V sync, TTL level, on 15−pin HD connectors.
1 RGBHV on 5 BNC connectors.
2Vpp.
400MHz (−3dB).
0.03%.
0.03Deg.
<0.05%.
72dB.
Cable EQ. control: 0dB to +8dB @50MHz;
Level control: −1.3dB to +6dB; ID BIT button,
TERM button, Hs (horizontal) and Vs (vertical)
sync switches.
AC.
12V DC, 60mA.
6.9cm x 6.2cm x 11.4cm (2.71" x 2.44" x 4.49") US;
15.1cm x 3.98cm x 8.6cm (5.94" x 1.57" x 3.39") EU W,
D, H.
0.3kg (0.67lbs) approx.
RK−2WP 19" rack adapter.
CATALOG
2014
www.kramerelectronics.com
WP-210A
Active Wall Plate − Computer Graphics Video to 5 BNC Line Amplifier with Stereo Audio
a % 8 A []{_
The WP-210A is a wall plate line driver for computer graphics video with
resolutions up to and exceeding UXGA together with unbalanced stereo
audio signals. The set-up controls are located on the front panel.
FEATURES
European version
HDTV Compatible.
●●
High Bandwidth - 350MHz (-3dB).
●●
Advanced Sync Processing - Ensures compatibility with a wide range of
computers.
●●
Front Panel Connections - 1 15-pin HD (F) (for VGA/UXGA) and 1 3.5mm
mini jack (F) (for stereo audio).
●●
Rear Panel Connections - 5 BNCs and terminal block (for balanced stereo
audio).
●●
Looping Input - 15-pin HD.
●●
Input Signal Termination.
●●
Front Panel Controls - All controls are located on the front panel for
convenient adjustment.
●●
Level (Gain) and EQ (Peaking Controls.
●●
Selectable Sync Input Impedance - 75Ω (analog) or 510Ω (TTL).
●●
Audio Level Controls - Left & right.
●●
Active Input LED Indicator.
●●
ID Bit Control.
●●
Dimensions - 6.9cm x 6.2cm x 11.4cm (2.71" x 2.44" x 4.49") US;
15.1cm x 3.98cm x 8.6cm (5.94" x 1.57" x 3.39") EU W, D, H.
●●
Wall Plate Size - 2 gang EU, 1 gang US.
●●
Optional - RK-121WP 19" rack adapter (for EU size wall plates only).
TECHNICAL SPECIFICATIONS
INPUT:
OUTPUTS:
MAX. OUTPUT LEVEL:
BANDWIDTH:
DIFF. GAIN:
DIFF. PHASE:
K-FACTOR:
VIDEO S/N RATIO:
CONTROLS:
COUPLING:
AUDIO THD + NOISE:
AUDIO 2nd HARMONIC:
POWER CONSUMPTION:
DIMENSIONS:
WEIGHT:
ACCESSORIES:
OPTIONS:
www.kramerelectronics.com
INSTALLER
SOLUTIONS
CATALOG
2014
Looping analog red, green, blue signals, 0.7Vpp/75Ω,
H and V sync, TTL level, on 15−pin HD (F) connectors;
unbalanced stereo audio on a 3.5mm mini jack.
1 RGBHV on 5 BNC connectors; balanced stereo audio
on a terminal block connector.
Video: 2Vpp; Audio: 5.3Vpp.
Video: 400MHz (−3dB), fully loaded; Audio: >100kHz.
0.05%.
0.02Deg.
<0.05%.
74.2dB.
Cable EQ. control: 0dB to +8dB @50 MHz; Level
control: −1.3dB to +6dB; ID BIT button; TERM button;
Hs (horizontal) and Vs (vertical) sync switches; right and
left audio level controls.
AC video and audio.
<0.032%.
<0.005%.
12V DC, 95mA.
6.9cm x 6.2cm x 11.4cm (2.71" x 2.44" x 4.49") US;
15.1cm x 3.98cm x 8.6cm (5.94" x 1.57" x 3.39") EU
W, D, H.
0.3kg (0.67lbs) approx.
Power supply.
RK−2WP 19" rack adapter.
ROOM
CONNECTIVITY
143
ROOM CONNECTIVITY
US version
●●
WP-211DS
Active Wall Plate − 2x1 Computer Graphics Video Automatic Switcher
ROOM CONNECTIVITY
%s8v
The WP-211DS is a high-performance wall plate switcher for computer
graphics video signals with resolutions up to and exceeding UXGA
and unbalanced stereo audio signals. When configured as a standby
switcher, it switches to the secondary input upon loss of the primary
input.
FEATURES
●●
High Bandwidth - 300MHz (-3dB).
●●
Automatic Standby Switching - Switches from the secondary input to the
primary input when a signal is detected.
●●
Power Connect™ System - A single connection to the transmitter or the
receiver powers both units. All system units must have the Power Connect
system to use this feature.
●●
Front Panel Connections - 2 15-pin HD (F) and 2 3.5mm mini jacks (F).
●●
Rear Panel Connections - Terminal block outputs for stereo audio, contact
closure control, RGBHV and twisted pair for computer graphics video.
●●
Looping Input - Input 1.
●●
Control - Automatic or contact closure switching and output disconnect
with LED status indicator.
●●
ID Bit Control.
●●
System Range - CAT 5 up to 100m (320ft).
●●
Twisted Pair Cable - UTP (unshielded twisted pair) or STP (shielded twisted
pair) such as CAT 5.
●●
Dimensions - 16.2cm x 3.98cm x 11.4cm (6.38" x 1.57" x 4.49") US;
15.1cm x 3.98cm x 8.6cm (5.94" x 1.57" x 3.39") EU W, D, H.
●●
Wall Plate Sizes - 2 gang EU, 3 gang US.
●●
Optional - RK-121WP 19" rack adapter (for EU size wall plates only).
European version
US version
TECHNICAL SPECIFICATIONS
INPUTS:
2 XGA on 15−pin HD (F) connectors;
2 unbalanced stereo audio on 3.5 mm mini audio
connectors.
OUTPUTS:
1 XGA (RGBHV) on a 10 PIN terminal block connector;
1 XGA on a 15−pin HD (F) connector (input #1 loop);
1 unbalanced stereo audio on a 3 PIN terminal block
connector; 1 CAT 5 (for video) on an 8 PIN terminal block
connector.
MAX. OUTPUT LEVEL:
Video: 1Vpp (XGA); Audio: 4dBu.
BANDWIDTH:
Video: 260MHz (−3dB) (XGA); Audio: 20kHz.
DIFF. GAIN:
0.05% (XGA).
DIFF. PHASE:
0.1Deg (XGA).
K-FACTOR:
0.3% (XGA).
S/N RATIO:
Video: 74dB; Audio: 80dB.
CROSSTALK (all hostile): Video: -59dB @100MHz.
CONTROLS:
Contact closure remote control, input default selection
switch, image−off button.
COUPLING:
Video: DC; Audio: DC.
AUDIO THD + NOISE:
0.017%.
AUDIO 2nd HARMONIC: 0.005%.
POWER CONSUMPTION: 12V DC, 330mA.
DIMENSIONS:
16.2cm x 3.98cm x 11.4cm (6.38" x 1.57" x 4.49") US;
15.1cm x 3.98cm x 8.6cm (5.94" x 1.57" x 3.39") EU
W, D, H.
WEIGHT:
0.3kg (0.67lbs) approx.
OPTIONS:
RK−2WP 19" rack adapter.
144
ROOM
CONNECTIVITY
INSTALLER
SOLUTIONS
CATALOG
2014
www.kramerelectronics.com
WP-220
Active Wall Plate − Computer Graphics Video & Composite Video Line Amplifier with Stereo Audio
C a % o 8 A []{_
The WP-220 is a wall plate line driver for computer graphics video with
resolutions up to and exceeding UXGA and composite video, each with
stereo audio signals. It provides controls to compensate for signal losses
inherent in long cable runs.
FEATURES
European version
HDTV Compatible.
●●
High Bandwidth - 500MHz (-3dB) for 15-pin HD and 490MHz for
composite video.
●●
Advanced Sync Processing - Ensures compatibility with a wide range of
computers.
●●
Front Panel Connections - 15-pin HD (PC) with 3.5mm stereo audio, and
RCA for composite video with 2 RCAs for stereo audio inputs.
●●
Rear Panel Connections - 5 BNC for computer graphics signals, terminal
blocks for the composite video signal, and balanced stereo terminal blocks
for each stereo audio signal.
●●
Level (Gain) and EQ (Peaking) Controls.
●●
Audio Level Controls - Left & right for stereo audio on 2 RCAs.
●●
Dimensions - 6.9cm x 6.2cm x 11.4cm (2.71" x 2.44" x 4.49") US;
15.1cm x 3.98cm x 8.6cm (5.94" x 1.57" x 3.39") EU W, D, H.
●●
Wall Plate Sizes - 2 gang EU, 1 gang US.
●●
Optional - RK-121WP 19" rack adapter (for EU size wall plates only).
TECHNICAL SPECIFICATIONS
INPUTS:
OUTPUT:
MAX. OUTPUT LEVEL:
BANDWIDTH:
DIFF. GAIN:
DIFF. PHASE:
K-FACTOR:
S/N RATIO:
CROSSTALK (all hostile):
CONTROLS:
COUPLING:
AUDIO THD + NOISE:
AUDIO 2nd HARMONIC:
POWER CONSUMPTION:
DIMENSIONS:
WEIGHT:
ACCESSORIES:
www.kramerelectronics.com
INSTALLER
SOLUTIONS
CATALOG
2014
1 XGA analog red, green, blue signals: 0.7Vpp/75 Ω;
H and V sync, TTL level, on a 15−pin HD (F) connector;
1 composite video 1Vpp/75Ω on an RCA connector;
1 PC unbalanced stereo audio on a 3.5mm mini jack;
1 unbalanced stereo line audio on RCA connectors.
1 RGBHV on 5 BNC connectors, 0.7Vpp/75 Ω,
RGB TTL level syncs,
1 composite video, 1Vpp/75Ω on 2 pins.
Video: 2Vpp; Audio: 7Vpp.
Video: XGA: 500MHz (−3dB), fully loaded; CV: 490MHz
(−3dB), fully loaded; Audio: >100kHz (−3dB).
XGA: 0.07%; CV: 0.05%.
XGA: 0.04Deg.; CV: 0.05Deg.
XGA: 0.1%; CV: <0.05%.
XGA: 75.1dB; CV: 76.7dB; Audio: 76.84dB.
Video: XGA: 63.6dB; CV: 64.5dB; Audio: -91dB.
Video: XGA EQ.: 0dB to +4.5dB @50MHz; CV Level:
-1.2dB to +6dB; CV EQ.: 0dB to +1.4dB @4.43MHz;
Audio: Line level: -70dB to +6.2dB.
Video: XGA/CV: DC; Audio: AC at input; DC at output.
0.028%.
0.012%.
12V DC, 145mA.
6.9cm x 6.2cm x 11.4cm (2.71" x 2.44" x 4.49") US;
15.1cm x 3.98cm x 8.6cm (5.94" x 1.57" x 3.39") EU
W, D, H.
0.3kg (0.67lbs) approx.
Power supply.
ROOM
CONNECTIVITY
145
ROOM CONNECTIVITY
US version
●●
WP-230
Active Wall Plate − Computer Graphics, Composite Video & s−Video & Stereo Audio Line Amplifier with RJ−45 Pass−Through
C - a $ r o 8 A []{_
The WP-230 is a wall plate line driver for computer graphics video signals
with resolutions up to and exceeding UXGA, composite video, s-Video
(Y/C) signals and stereo audio signals. It provides controls to compensate
for signal losses inherent in long cable runs.
ROOM CONNECTIVITY
FEATURES
US version
●●
HDTV Compatible.
●●
High Bandwidth - 520MHz (-3dB) for 15-pin HD, 438MHz (-3dB) for
composite video, 155MHz (-3dB) for Y/C.
●●
Front Panel Connections - 15-pin HD (F) with 3.5mm (F) stereo audio and
RCA for composite video; 4-pin mini DIN for Y/C with 2 RCAs for stereo
audio inputs; RJ-45 pass-through.
●●
Rear Panel Connections - 5 BNC (F) for the computer graphics signals;
terminal blocks for the composite video and Y/C signals; balanced stereo
terminal blocks for each stereo audio signal; RJ-45 pass-through.
●●
Level (Gain) Control - Line level audio from 2 RCA (F), composite video and
s-Video (both Y and C).
●●
EQ (Peaking) Control - 15-pin HD & composite video.
●●
Audio Level Controls - Left & right for stereo audio on 2 RCA.
●●
Dimensions - 6.9cm x 6.2cm x 11.4cm (2.71" x 2.44" x 4.49") W, D, H.
●●
Wall Plate Size - 1 gang US only.
TECHNICAL SPECIFICATIONS
INPUTS:
OUTPUT:
MAX. OUTPUT LEVEL:
BANDWIDTH (-3dB):
DIFF. GAIN:
DIFF. PHASE:
K-FACTOR:
S/N RATIO:
CROSSTALK (all hostile):
CONTROLS:
COUPLING:
AUDIO THD + NOISE:
AUDIO 2nd HARMONIC:
POWER CONSUMPTION:
DIMENSIONS:
WEIGHT:
ACCESSORIES:
146
ROOM
CONNECTIVITY
INSTALLER
SOLUTIONS
1 XGA on a 15−pin HD connector,
1 composite video on an RCA connector,
1 s−Video on a 4−pin connector,
1 unbalanced stereo audio on a 3.5mm mini jack,
1 unbalanced stereo audio line on 2 RCA connectors.
1 RGBHV on 5 BNC connectors,
1 composite video on a 2−pole terminal block,
1 s−Video on a 4−pole terminal block,
1 balanced stereo audio on a 5−pole terminal block,
1 balanced stereo audio line on a 5−pole terminal block.
XGA: 1.8Vpp; CV: 2.8Vpp; Y/C: 2.1Vpp; Audio: 6.6Vpp.
XGA: 520MHz; CV: 438MHz; Y/C: 155MHz; Audio:
>100kHz.
0.03%.
0.03Deg.
<0.05%.
Video: 76dB; Audio: 71dB.
Video: -55dB; Audio: <-90dB.
CV level: -1.3dB to +6dB, EQ level: 0dB to +1.6dB
@4.43MHz; XGA level: 0dB to +7.2dB, EQ @50MHz;
Y/C level: -2.1dB to +4.9dB (Y); -1.5dB to +4.9dB
(C);Right and left LINE AUDIO level controls.
Video: DC; Audio: AC.
0.02%.
0.003%.
12V DC, 175mA.
6.9cm x 6.2cm x 11.4cm (2.71" x 2.44" x 4.49") US;
15.1cm x 3.98cm x 8.6cm (5.94" x 1.57" x 3.39") EU
W, D, H.
0.3kg (0.67lbs) approx.
Power supply.
CATALOG
2014
www.kramerelectronics.com
WP-301xl
Active Wall Plate − Computer Graphics Video & Stereo Audio Transmitter with Enhanced EDID
% r 8 []{_
The WP-301xl is a wall plate transmitter for computer graphics video &
stereo audio signals. The unit converts the input signals to a twisted pair
signal that it transmits to a compatible Kramer receiver.
FEATURES
US version
www.kramerelectronics.com
INSTALLER
●●
Front Panel Connections - 15-pin HD & stereo 3.5mm.
●●
Rear Panel Connections - RJ-45 on US version, easy-insert CAT 5 terminal
on EU version, power.
●●
HDTV Compatible.
●●
EDID Storage - EDID information can be stored in the wall plate by using
the FC-200 XGA EDID Copier.
●●
Power Connect™ System - A single connection to the transmitter or the
receiver powers both units when the devices are within 150ft (50m) of
each other.
●●
Dimensions - 7.9cm x 3.3cm x 12.4cm (3.12" x 1.31" x 4.88") US;
8.6cm x 3.1cm x 8.6cm (3.39" x 1.22" x 3.39") and 8cm x 3.1cm x 8cm
(3.15" x 1.22" x 3.15") EU W, D, H.
●●
Wall Plate Size - 1 gang EU/US (US version includes a removable wall
plate frame).
●●
Optional - RK-121WP 19" rack adapter (for EU size wall plates only).
SOLUTIONS
CATALOG
2014
ROOM
CONNECTIVITY
147
ROOM CONNECTIVITY
European version
POWER AMPLIFIERS
WAP-1
Active Wall Plate − Power Amplifier With 2x1 Switching
8n
ROOM CONNECTIVITY
The WAP-1 is a high-performance power amplifier for line level
unbalanced stereo audio signals. It delivers a speaker output of 9 watts
RMS per channel into a 4Ω load.
FEATURES
●●
Front Panel Connections - 2 3.5mm inputs for inputs 1 and 2.
●●
Rear Panel Connections - Terminal blocks for secondary input (input 1) and
terminal blocks for 2 speaker outputs.
●●
Control - Level (volume).
●●
Dimensions - 11.4cm x 3.14cm x 11.4cm (4.49" x 1.23" x 4.49") US;
15.1cm x 3.14cm x 8.6cm (5.94" x 1.23" x 3.39") or 15.1cm x 3.14cm x
8.0cm (5.94" x 1.23" x 3.15") EU W, D, H.
●●
Wall Plate Size - 2 gang EU/US.
●●
Optional - RK-121WP 19" rack adapter (for EU size wall plates only).
US version
European version
TECHNICAL SPECIFICATIONS
INPUTS:
2 unbalanced stereo audio on 3.5mm mini jacks,
1 unbalanced stereo audio on a 3−pin terminal block.
OUTPUTS:
1 stereo speaker on a 4−pin terminal block.
OUTPUT POWER:
9W RMS continuous per channel.
BANDWIDTH:
50kHz (−3dB).
S/N RATIO:
70dB.
CROSSTALK (all hostile): <−69dB @1kHz.
CONTROLS:
Level: <-17dB to 26dB; input selector switch.
COUPLING:
Input: AC; Output: DC.
AUDIO THD + NOISE:
0.7%.
AUDIO 2nd HARMONIC: 0.58%.
POWER CONSUMPTION: 12V DC, 2.3A.
DIMENSIONS:
11.4cm x 3.14cm x 11.4cm (4.49" x 1.23" x 4.49") US;
15.1cm x 3.14cm x 8.6cm (5.94" x 1.23" x 3.39") or
15.1cm x 3.14cm x 8.0cm (5.94" x 1.23" x 3.15") EU
W, D, H.
WEIGHT:
0.3kg (0.67lbs) approx.
ACCESSORIES:
Power supply.
148
ROOM
CONNECTIVITY
INSTALLER
SOLUTIONS
CATALOG
2014
www.kramerelectronics.com
PASSIVE
COMPUTER (15-PIN HD)
WPX-3
Passive Wall Plate − 15−pin HD
Computer Graphics Passive Wall Plate
FEATURES
US version
European version
●●
Front Panel Connection - 15-pin HD (F).
●●
Rear Panel Connection - 2 6-pin terminal blocks.
●●
EDID PassThru - Passes EDID signals from source to display.
●●
Dimensions - 6.9cm x 2.93cm x 11.4cm (2.71" x 1.15" x 4.49") US;
8.6cm x 2.93cm x 8.6cm (3.39" x 1.15" x 3.39") and 8cm x 2.93cm x
8cm (3.15" x 1.15" x 3.15") EU W, D, H.
●●
Wall Plate Size - 1 gang EU/US.
●●
Optional - RK-121WP 19" rack adapter (for EU size wall plates only).
WXV-1
Passive Wall Plate − RCA & 15−pin HD
C$
Composite Video & Computer Graphics Video Passive Wall Plate
FEATURES
US version
www.kramerelectronics.com
European version
INSTALLER
●●
Front Panel Connections - RCA (F) and 15-pin HD (F).
●●
Rear Panel Connections - 2 6-pole terminal blocks.
●●
Dimensions - 6.9cm x 2.93cm x 11.4cm (2.71" x 1.15" x 4.49") US;
8.6cm x 2.93cm x 8.6cm (3.39" x 1.15" x 3.39") and 8cm x 2.93cm x 8cm
(3.15" x 1.15" x 3.15") EU W, D, H.
●●
Wall Plate Size - 1 gang EU/US.
●●
Optional - RK-121WP 19" rack adapter (for EU size wall plates only).
SOLUTIONS
CATALOG
2014
ROOM
CONNECTIVITY
149
ROOM CONNECTIVITY
$ []{_
WXA-1
Passive Wall Plate − 15−pin HD & 3.5mm Stereo Audio
$ 8 []
Computer Graphics Video & Stereo Audio Passive Wall Plate
ROOM CONNECTIVITY
FEATURES
US version
European version
●●
Front Panel Connections - 15-pin HD (F) and 3.5mm (F).
●●
Rear Panel Connections - 2 6-pole terminal blocks.
●●
Dimensions - 6.9cm x 2.93cm x 11.4cm (2.71" x 1.15" x 4.49") US;
8.6cm x 2.93cm x 8.6cm (3.39" x 1.15" x 3.39") and 8cm x 2.93cm x 8cm
(3.15" x 1.15" x 3.15") EU W, D, H.
●●
Wall Plate Size - 1 gang EU/US.
●●
Optional - RK-121WP 19" rack adapter (for EU size wall plates only).
WXA-3
Passive Wall Plate − 15−pin HD & 3.5mm Stereo Audio
$8
Computer Graphics Video & Stereo Audio Passive Wall Plate
FEATURES
US version
European version
●●
Front Panel Connections - 15-pin HD (F) and 3.5mm (F).
●●
Rear Panel Connections - 2 6-pole terminal blocks, 1 3-pole terminal block.
●●
EDID PassThru - Passes EDID signals from source to display.
●●
Dimensions - 6.9cm x 2.93cm x 11.4cm (2.71" x 1.15" x 4.49") US;
8.6cm x 2.93cm x 8.6cm (3.39" x 1.15" x 3.39") and 8cm x 2.93cm x 8cm
(3.15" x 1.15" x 3.15") EU W, D, H.
●●
Wall Plate Size - 1 gang EU/US.
●●
Optional - RK-121WP 19" rack adapter (for EU size wall plates only).
WAV-5
Passive Wall Plate − 15−pin HD, 3.5mm Stereo Audio & 3 RCA
C$o8
Computer Graphics Video, Composite Video & Stereo Audio Passive Wall
Plate
FEATURES
US version
●●
Front Panel Connections - 15-pin HD (F), 3.5mm (F) & 3 RCA (F).
●●
Rear Panel Connections - 15-pin HD (F), 3.5mm (F) & 3 RCA (F).
●●
Dimensions - 6.9cm x 2.1cm x 11.4cm (2.71" x 0.82" x 4.49") US;
8.6cm x 2.1cm x 8.6cm (3.39" x 0.82" x 3.39") and 8cm x 2.1cm x 8cm
(3.15" x 0.82" x 3.15") EU W, D, H.
●●
Wall Plate Size - 1 gang EU/US.
●●
Optional - RK-121WP 19" rack adapter (for EU size wall plates only).
European version
150
ROOM
CONNECTIVITY
INSTALLER
SOLUTIONS
CATALOG
2014
www.kramerelectronics.com
WAV-5C
Passive Wall Plate − 15−pin HD Breakout, 3.5mm Stereo Audio & 3 RCA
Ca$o8
Computer Graphics Video, Composite Video, & Stereo Audio Passive Wall
Plate
FEATURES
Front Panel Connections - 15-pin HD (F), 3.5mm (F) & 3 RCA (F).
●●
Rear Panel Connections - 5 BNC (F) pigtail, 3.5mm (F), 3 RCA (F).
●●
Dimensions - 6.9cm x 3.5cm x 11.4cm (2.71" x 1.37" x4.49 ") US;
8.6 cm x 3.5cm x 8.6cm (3.39" x 1.37" x 3.39") and 8cm x 3.5cm x 8cm
(3.15" x 1.37" x 3.15") EU W, D, H.
●●
Wall Plate Size - 1 gang EU/US.
●●
Optional - RK-121WP 19" rack adapter (for EU size wall plates only).
US version
European version
WAV-5YC
Passive Wall Plate − 15−pin HD, 3.5mm Stereo Audio, s−Video, Dual RCA
-$o8
Computer Graphics, s-Video & Stereo Audio Passive Wall Plate
FEATURES
US version
European version
www.kramerelectronics.com
INSTALLER
●●
Front Panel Connections - 15-pin HD (F), 4-pin mini DIN (F), 3.5mm (F) &
2 RCA (F).
●●
Rear Panel Connections - 15-pin HD (F), 4-pin mini DIN (F), 3.5mm (F) &
2 RCA (F).
●●
Dimensions - 6.9cm x 2.5cm x 11.4cm (2.71" x 0.98" x 4.49") US;
8.6cm x 2.5cm x 8.6cm (3.39" x 0.98" x 3.39") and 8cm x 2.5cm x 8cm
(3.15" x 0.98" x 3.15") EU W, D, H.
●●
Wall Plate Size - 1 gang EU/US.
●●
Optional - RK-121WP 19" rack adapter (for EU size wall plates only).
SOLUTIONS
CATALOG
2014
ROOM
CONNECTIVITY
151
ROOM CONNECTIVITY
●●
WAV-6YC
Passive Wall Plate − 15−pin HD, 3.5mm Stereo Audio, s−Video & 3 RCA
C-$o8
Computer Graphics Video, Composite Video, s-Video & Stereo Audio
Passive Wall Plate
ROOM CONNECTIVITY
FEATURES
●●
Front Panel Connections - 15-pin HD (F), 4-pin mini DIN (F), 3.5mm (F) &
3 RCA (F).
●●
Rear Panel Connections - 15-pin HD (F), 4-pin mini DIN (F), 3.5mm (F) &
3 RCA (F).
●●
Dimensions - 6.9cm x 2.5cm x 11.4cm (2.71" x 0.98" x 4.49") US;
8.6cm x 2.5cm x 8.6cm (3.39" x 0.98" x 3.39") and 8cm x 2.5cm x 8cm
(3.15" x 0.98" x 3.15") EU W, D, H.
●●
Wall Plate Size - 1 gang EU/US.
●●
Optional - RK-121WP 19" rack adapter (for EU size wall plates only).
US version
European version
WAV-645
Passive Wall Plate − 15−pin HD, RJ−45, 3.5mm Stereo Audio & 3 RCA
C$o8H
Computer Graphics Video, Composite Video, Network & Stereo Audio
Passive Wall Plate
FEATURES
US version
●●
Front Panel Connections - 15-pin HD (F), RJ-45 (F), 3.5mm (F) & 3 RCA (F).
●●
Rear Panel Connections - 15-pin HD (F), RJ-45 (F), 3.5mm (F) & 3 RCA (F).
●●
Dimensions - 6.9cm x 3.5cm x 11.4cm (2.71" x 1.37" x 4.49") US.
●●
Wall Plate Size - 1 gang US.
WAV-6UBA
Passive Wall Plate − 15−pin HD, 3.5mm Stereo Audio, USB & 3 RCA
[email protected]
Computer Graphics, USB, Composite Video & Stereo Audio Passive Wall
Plate
FEATURES
US version
●●
Front Panel Connections - 15-pin HD (F), USB-B (F), 3.5mm (F), & 3 RCA (F).
●●
Rear Panel Connections - 15-pin HD (F), USB-A cable (F), 3.5mm (F), &
3 RCA (F).
●●
Dimensions - 6.9cm x 3.4cm x 11.4cm (2.71" x 1.34" x 4.49") US;
8.6cm x 3.4cm x 8.6cm (3.39" x 1.34" x 3.39") and 8cm x 3.4cm x 8cm
(3.15" x 1.34" x 3.15") EU W, D, H.
●●
Wall Plate Size - 1 gang EU/US.
●●
Optional - RK-121WP 19" rack adapter (for EU size wall plates only).
European version
152
ROOM
CONNECTIVITY
INSTALLER
SOLUTIONS
CATALOG
2014
www.kramerelectronics.com
RCA
WAV-2
Passive Wall Plate − 3 RCA & 3.5mm Stereo Audio
w8v
3 Composite Video & Stereo Audio Passive Wall Plate
FEATURES
Front Panel Connections - 3.5mm (F) & 3 RCA (F).
●●
Rear Panel Connections - 3-pole & 6-pole terminal block.
●●
Dimensions - 6.9cm x 2.93cm x 11.4cm (2.71" x 1.15" x 4.49") US;
8.6cm x 2.93cm x 8.6cm (3.39" x 1.15" x 3.39") and 8cm x 2.93cm x 8cm
(3.15" x 1.15" x 3.15") EU W, D, H.
US version
●●
Wall Plate Size - 1 gang EU/US.
European version
●●
Optional - RK-121WP 19" rack adapter (for EU size wall plates only).
s-VIDEO 4-PIN
WVS-1
Passive Wall Plate − s−Video & Dual RCA
-o
s-Video & Stereo Audio Passive Wall Plate
FEATURES
US version
European version
●●
Front Panel Connections - 4-pin mini DIN (F) & dual RCA (F).
●●
Rear Panel Connections - 8-pole terminal block.
●●
Dimensions - 6.9cm x 2.93cm x 11.4cm (2.71" x 1.15" x 4.49") US;
8.6cm x 2.93cm x 8.6cm (3.39" x 1.15" x 3.39") and 8cm x 2.93cm x 8cm
(3.15" x 1.15" x 3.15") EU W, D, H.
●●
Wall Plate Size - 1 gang EU/US.
●●
Optional - RK-121WP 19" rack adapter (for EU size wall plates only).
WVS-2
Passive Wall Plate − RCA, s−Video & Dual 3.5mm Stereo Audio
C-8
Composite Video, s-Video & Dual Stereo Audio Passive Wall Plate
FEATURES
US version
●●
Front Panel Connections - RCA (F), 4-pin mini DIN (F) & dual 3.5mm (F).
●●
Rear Panel Connections - Dual 6-pole terminal block output.
●●
Dimensions - 6.9cm x 4.0cm x 11.4cm (2.71" x 1.57" x 4.49") US;
8.6cm x 4.0cm x 8.6cm (3.39" x 1.57" x 3.39") and 8cm x 4.0cm x 8cm
(3.15" x 1.57" x 3.15") EU W, D, H.
●●
Wall Plate Size - 1 gang EU/US.
●●
Optional - RK-121WP 19" rack adapter (for EU size wall plates only).
European version
www.kramerelectronics.com
INSTALLER
SOLUTIONS
CATALOG
2014
ROOM
CONNECTIVITY
153
ROOM CONNECTIVITY
●●
HDMI
WP‑H1M
Passive Wall Plate − HDMI
P
HDMI Passive Wall Plate
ROOM CONNECTIVITY
FEATURES
●●
Front Panel Connection - 1 HDMI (F).
●●
Rear Panel Connection - 1 HDMI (F) on a flat, flexible cable.
●●
Dimensions - 6.9cm x 4.0cm x 11.4cm (2.71" x 1.57" x 4.49") US;
8.6cm x 4.0cm x 8.6cm (3.39" x 1.57" x 3.39") and 8cm x 4.0cm x 8cm
(3.15" x 1.57" x 3.15") EU W, D, H.
●●
Wall Plate Size - 1 gang EU/US.
●●
Optional - RK-121WP 19" rack adapter (for EU size wall plates only).
US version
European version
WP‑H2M
Passive Wall Plate − Dual HDMI
P
Dual HDMI Passive Wall Plate
FEATURES
●●
Front Panel Connections - 2 HDMI (F).
●●
Rear Panel Connections - 2 HDMI (F) on flat, flexible cable.
●●
Dimensions - 6.9cm x 4.0cm x 11.4cm (2.71" x 1.57" x 4.49") US;
8.6cm x 4.0cm x 8.6cm (3.39" x 1.57" x 3.39") and 8cm x 4.0cm x 8cm
(3.15" x 1.57" x 3.15") EU W, D, H.
●●
Wall Plate Size - 1 gang EU/US.
●●
Optional - RK-121WP 19" rack adapter (for EU size wall plates only).
US version
European version
WAV‑5H
Passive Wall Plate − HDMI, s−Video & 3 RCA
C-Po
HDMI, s-Video, Composite Video & Stereo Audio Passive Wall Plate
FEATURES
●●
Front Panel Connections - HDMI (F), 4-pin mini DIN (F) & 3 RCA (F).
●●
Rear Panel Connections - HDMI cable (F), 4-pin mini DIN (F) & 3 RCA (F).
●●
Dimensions - 6.9cm x 4.0cm x 11.4cm (2.71" x 1.57" x 4.49") US;
8.6cm x 4.0cm x 8.6cm (3.39" x 1.57" x 3.39") and 8cm x 4.0cm x 8cm
(3.15" x 1.57" x 3.15") EU W, D, H.
●●
Wall Plate Size - 1 gang EU/US.
●●
Optional - RK-121WP 19" rack adapter (for EU size wall plates only).
US version
European version
154
ROOM
CONNECTIVITY
INSTALLER
SOLUTIONS
CATALOG
2014
www.kramerelectronics.com
WAV-6H
Passive Wall Plate − HDMI, 15−pin HD, 3.5mm Stereo Audio & 3 RCA
C$Po8
Computer Graphics, HDMI, Composite Video & Stereo Audio Passive
Wall Plate
FEATURES
Front Panel Connections - HDMI (F), 15-pin HD (F), 3.5mm & three RCA (F).
●●
Rear Panel Connections - HDMI cable (F), 15-pin HD (F), 3.5mm & three
RCA (F).
●●
Wall Plate Size - 1 gang EU/US.
●●
Optional - RK-121WP 19" rack adapter (for EU size wall plates only).
US version
WXA-H
Passive Wall Plate − 15−pin HD, 3.5mm Audio & HDMI
$P8
Computer Graphics Video, HDMI & Stereo Audio Passive Wall Plate
FEATURES
●●
Front Panel Connections - 15-pin HD (F), HDMI (F) and 3.5mm (F).
●●
Rear Panel Connections - 15-pin HD (F), HDMI (F) and 3.5mm (F).
●●
EDID PassThru - Passes EDID signals from source to display.
●●
Dimensions - 6.9cm x 4.0cm x 11.4cm (2.71" x 1.57" x 4.49") US;
8.6cm x 4.0cm x 8.6cm (3.39" x 1.57" x 3.39") and 8cm x 4.0cm x 8cm
(3.15" x 1.57" x 3.15") EU W, D, H.
●●
Wall Plate Size - 1 gang EU/US.
●●
Optional - RK-121WP 19" rack adapter (for EU size wall plates only).
European version
www.kramerelectronics.com
INSTALLER
SOLUTIONS
CATALOG
2014
ROOM
CONNECTIVITY
155
ROOM CONNECTIVITY
●●
DVI
WAV-DA1
Passive Wall Plate − DVI & RCA
Gj
DVI & S/PDIF Passive Wall Plate
ROOM CONNECTIVITY
FEATURES
US version
●●
Front Panel Connections - DVI (F) & 1 RCA (F).
●●
Rear Panel Connections - DVI (F) connector on a flat flexible cable &
1 RCA (F).
●●
Dimensions - 6.9cm x 3.3cm x 11.4cm (2.71" x 1.3" x 4.49") US;
8.6cm x 3.3cm x 8.6cm (3.39" x 1.3" x 3.39") and 8cm x 3.3cm x 8cm
(3.15" x 1.3" x 3.15") EU W, D, H.
●●
Wall Plate Size - 1 gang EU/US.
●●
Optional - RK-121WP 19" rack adapter (for EU size wall plates only).
European version
WAV-DA2
Passive Wall Plate − DVI & Dual RCA
Go
DVI & Stereo Audio Passive Wall Plate
FEATURES
●●
Front Panel Connections - DVI (F) & 2 RCA (F).
●●
Rear Panel Connections - DVI (F) on a flat, flexible cable & 2 RCA (F).
●●
Dimensions - 6.9cm x 3.3cm x 11.4cm (2.71" x 1.3" x 4.49") US;
8.6cm x 3.3cm x 8.6cm (3.39" x 1.3" x 3.39") and 8cm x 3.3cm x 8cm
(3.15" x 1.3" x 3.15") EU W, D, H.
●●
Wall Plate Size - 1 gang EU/US.
●●
Optional - RK-121WP 19" rack adapter (for EU size wall plates only).
US version
European version
156
ROOM
CONNECTIVITY
INSTALLER
SOLUTIONS
CATALOG
2014
www.kramerelectronics.com
XLR
WXL-1FM
Passive Wall Plate − Dual XLR (F+M)
9
XLR Passive Wall Plate
FEATURES
Front Panel Connections - XLR (F) & XLR (M).
●●
Rear Panel Connections - 6-pole terminal block.
●●
Dimensions - 6.9cm x 3.7cm x 11.4cm (2.71" x 1.46" x 4.49") US;
8.6cm x 3.7cm x 8.6cm (3.39" x 1.46" x 3.39") and 8cm x 3.7cm x 8cm
(3.15" x 1.46" x 3.15") EU W, D, H.
●●
Wall Plate Size - 1 gang EU/US.
●●
Optional - RK-121WP 19" rack adapter (for EU size wall plates only).
European version
WXL-2F
Passive Wall Plate − Dual XLR (F+F)
9
XLR Passive Wall Plate
FEATURES
US version
●●
Front Panel Connections - 2 XLR (F).
●●
Rear Panel Connections - 6-pole terminal block.
●●
Dimensions - 6.9cm x 3.7cm x 11.4cm (2.71" x 1.46" x 4.49") US;
8.6cm x 3.7cm x 8.6cm (3.39" x 1.46" x 3.39") and 8cm x 3.7cm x 8cm
(3.15" x 1.46" x 3.15") EU W, D, H.
●●
Wall Plate Size - 1 gang EU/US.
●●
Optional - RK-121WP 19" rack adapter (for EU size wall plates only).
European version
WXL-2M
Passive Wall Plate − Dual XLR (M+M)
9
XLR Passive Wall Plate
FEATURES
US version
www.kramerelectronics.com
●●
Front Panel Connections - 2 XLR (M).
●●
Rear Panel Connections - 6-pole terminal block.
●●
Dimensions - 6.9cm x 3.7cm x 11.4cm (2.71" x 1.46" x 4.49") US;
8.6cm x 3.7cm x 8.6cm (3.39" x 1.46" x 3.39") and 8cm x 3.7cm x 8cm
(3.15" x 1.46" x 3.15") EU W, D, H.
●●
Wall Plate Size - 1 gang EU/US.
●●
Optional - RK-121WP 19" rack adapter (for EU size wall plates only).
European version
INSTALLER
SOLUTIONS
CATALOG
2014
ROOM
CONNECTIVITY
157
ROOM CONNECTIVITY
US version
●●
ACCESSORIES
RACK ADAPTERS
RK-121WP
19-Inch Rack Adapter for Multiple European Wall Plates
ROOM CONNECTIVITY
19-inch rack adapter for mounting 2 European 1 gang and 1
European 2 gang wall plates in a 2U rack space.
RK-22WP
19-Inch Rack Adapter for Dual 2−Gang European Wall Plates
19-inch rack adapter for mounting 2 European 2 gang wall plates
in a 2U rack space.
RK-2WP
19-Inch Rack Adapter for Single 2−Gang European Wall Plate
19-inch rack adapter for mounting 1 European 2 gang wall plate
in a 19" 2U rack space.
158
ROOM
CONNECTIVITY
INSTALLER
SOLUTIONS
CATALOG
2014
www.kramerelectronics.com
WALL BOXES
OWB-1G
1 Gang On−Wall Box
The OWB-1G is a white plastic box for installing a single 1 gang
European wall plate. The box is mounted on the wall for applications
where in-wall installation is not possible.
FEATURES
Dimensions - 80mm x 80mm x 40mm (3.1” x 3.1” x 1.5”).
●●
Size - 1 gang EU, available in white, includes a frame for 2 wall plate
inserts. Inserts and blanks are not included.
* Shown with optional WP insert modules
OWB-2G
2 Gang On−Wall Box
The OWB-2G is a white plastic box for installing a single 2 gang
European wall plate. The box is mounted on the wall for applications
where in-wall installation is not possible.
FEATURES
●●
Dimensions - 148mm x 80mm x 40mm (5.8” x 3.1” x 1.5”).
●●
Size - 2 gang EU, available in white, includes a frame for 4 wall plate
inserts. Inserts and blanks are not included.
* Shown with optional WP insert modules
OWB-3G
3 Gang On−Wall Box
The OWB-3G is a white plastic box for installing a single 3 gang US
wall plate (such as the WP-500). The box is mounted on the wall for
applications where in-wall installation is not possible in US and non-US
installations.
FEATURES
www.kramerelectronics.com
INSTALLER
SOLUTIONS
●●
Dimensions - 163mm x 115mm x 57mm (6.4” x 4.5” x 2.2”).
●●
Size - 3 gang US, available in white.
CATALOG
2014
ROOM
CONNECTIVITY
159
ROOM CONNECTIVITY
●●
FLOOR BOX FRAMES
MOUNTING FRAMES
F-010
Active Mounting Box − Computer Graphics Video Line Amplifier for OBO Bettermann Floor Box
ROOM CONNECTIVITY
$ []{_
The F-010 mounting box for OBO Bettermann floor boxes is a line
amplifier for computer graphics video signals up to and exceeding
UXGA. The unit includes two adjacent openings for Kramer inserts.
FEATURES
●●
HDTV Compatible.
●●
EDID PassThru - Passes EDID signals between the source and display.
●●
Max. Resolution - Up to UXGA.
●●
Front Panel Connection - UXGA on a 15-pin HD connector.
●●
Rear Panel Connections - RGBHV & power.
●●
Indicator - Power LED: lights red when powered on, green when
receiving a signal.
●●
Size - Fits GB2 and GB3 OBO Bettermann Floor Boxes.
TECHNICAL SPECIFICATIONS
INPUTS:
OUTPUTS:
VGA
Computer
Graphics
Source
MAX. OUTPUT LEVEL:
RESOLUTION:
BANDWIDTH (-3dB):
DIFF. GAIN:
DIFF. PHASE:
K-FACTOR:
S/N RATIO:
CONTROLS:
COUPLING:
POWER CONSUMPTION:
DIMENSIONS:
VGA
WEIGHT:
ACCESSORIES:
OPTIONS:
Display
160
ROOM
CONNECTIVITY
INSTALLER
SOLUTIONS
1 UXGA on a 15−pin HD (F) connector;
1 power 12V DC on a 2−pin terminal block
connector.
1 RGBHV for XGA on an 8−pin terminal block
connector; SDA and SCL for EDID on a 2−pin
terminal block connector.
1.7Vpp.
Up to UXGA.
400MHz.
0.1%.
0.1Deg.
<0.05%.
69dB @5MHz.
XGA EQ.: 0dB to 8.2dB; power LED.
DC.
12V DC, 70mA.
Closed: 7.5cm x 15.7cm x 4.4cm
(2.95” x 6.18" x 1.73") W, D, H;
Open: 7.5cm x 20.7cm x 4.4cm
(2.95” x 8.15" x 1.73") W, D, H.
0.19kg (0.42lbs) approx.
Power supply.
Kramer C−GM/XL cable.
CATALOG
2014
www.kramerelectronics.com
F-021
Active Mounting Box − Computer Graphics Video & Audio Line Amplifier for OBO Bettermann Floor Box
$ 8 []{_
The F-021 mounting box for OBO Bettermann floor boxes is a line
amplifier for computer graphics video signals up to and exceeding
UXGA and balanced stereo audio. The unit includes two adjacent
openings for Kramer inserts.
FEATURES
HDTV Compatible.
●●
Max. Resolution - Up to UXGA.
●●
EDID PassThru - Passes EDID signals between the source and display.
●●
Front Panel Connections - 15-pin HD (F) with 3.5mm (F) stereo audio.
●●
Rear Panel Connections - RGBHV for computer graphics and balanced
stereo audio on terminal block connectors.
●●
Range - More than 100m (300ft) and a 20kHz audio bandwidth with
an S/N ratio that exceeds 80dB over the same transmission range.
●●
Audio Level (Gain) and Video EQ (Peaking) Controls.
●●
Built-In Audio Amplifier.
●●
Modular Expandability - Accommodates two single or one dual Kramer
wall plate inserts (covered with blank inserts).
●●
Size - Suitable for mounting into OBO Bettermann flush floor service
units that accept GB2 and GB3 size boxes.
TECHNICAL SPECIFICATIONS
INPUTS:
1 UXGA on a 15−pin HD (F) connector;
1 unbalanced stereo audio on a 3.5mm mini
connector;
1 12V DC on 2−pin terminal block connectors.
SCL and SDA for EDID on 2−pin terminal block
connectors; RGBHV for XGA on 8−pin terminal
block connectors; balanced stereo audio on 5−pin
terminal block connectors.
VGA
Audio
OUTPUTS:
Computer
Graphics
Source
Audio
Audio
MAX. OUTPUT LEVEL:
RESOLUTION:
AUDIO BANDWIDTH:
DIFF. GAIN:
DIFF. PHASE:
K-FACTOR:
S/N RATIO:
CONTROLS:
COUPLING:
AUDIO THD + NOISE:
AUDIO 2nd HARMONIC:
POWER CONSUMPTION:
DIMENSIONS:
VGA
Display
www.kramerelectronics.com
Active Speakers
INSTALLER
SOLUTIONS
WEIGHT:
ACCESSORIES:
CATALOG
2014
Video: 1.9Vpp; Audio: 2.7Vpp.
Up to UXGA.
20kHz.
5.8%.
0.5Deg.
<0.05%.
Video: 60dB @5MHz; Audio: 78dB @1kHz.
Video detection LED.
Video: AC; Audio: AC.
0.04%.
0.001%.
12V DC, 340mA (feeding TP−122−od receiver); self
current 110mA.
Closed: 7.5cm x 15.7cm x 4.4cm
(2.95” x 6.18" x 1.73") W, D, H;
open: 7.5cm x 15.7cm x 4.4cm
(2.95” x 6.18" x 1.73") W, D, H.
0.19kg (0.42lbs) approx.
Power supply.
ROOM
CONNECTIVITY
161
ROOM CONNECTIVITY
●●
F-571
Active Mounting Box − HDMI over Twisted Pair Transmitter for Floor Boxes
s P [] () :
The F-571 mounting box for Ackermann or Bettermann floor boxes
is a DGKat™ twisted pair transmitter for HDMI signals. The unit
converts an HDMI signal to a DGKat™ twisted pair signal that it
transmits to a compatible twisted pair receiver.
ROOM CONNECTIVITY
FEATURES
●●
Max. Data Rate - 4.95Gbps (1.65Gbps per graphic channel).
●●
HDTV Compatible.
●●
HDCP Compliant.
●●
DGKat™ Signal Integration - Kramer’s unique technology for converting
TMDS as well as control and communication to signals that run over
twisted pair cables. We strongly recommend using Kramer DGKat™
cables designed specifically for optimum performance.
●●
HDMI Support - 3D, Deep Color, x.v.Color™, Lip Sync, HDMI
Uncompressed Audio Channels, Dolby TrueHD, DTS-HD.
●●
3D Pass-Through.
●●
System Range - Up to 90m (295ft) at 1080i, or up to 30m (98ft)
at 1080p on shielded BC-DGKat524 cable. Up to 90m (295ft) at
1080i, or up to 70m (230ft) at 1080p on shielded BC-DGKat623
cable. Up to 100m (330ft) at 1080i or up to 90m (295ft) at 1080p
on shielded BC-DGKat7a23 cable.
●●
Cable - For optimum range and performance, use Kramer's
BC-DGKat524, BC-DGKat623 or BC-DGKat7a23 cables. Note that
the transmission range depends on the signal resolution, graphics
card and display used. The distance using non-Kramer CAT 5,
CAT 6, and CAT 7 cables may not reach these ranges.
●●
EDID PassThru - Passes EDID signals from source to display.
●●
Active Indication Reporting - Status LED lights red when receiving
power only, orange when output and power are attached, and yellow
when both an active input and output are attached.
●●
Power Connect™ System - A single connection to the transmitter
powers the receiver.
●●
Modular Expandability - Accommodates two single or one dual Kramer
wall plate inserts (covered with blank inserts).
●●
Size - Suitable for mounting into Ackermann or Bettermann flush floor
service units that accept GB2 and GB3 size boxes.
HDMI
DVD
Player
CAT 5
INPUT:
OUTPUT:
BANDWIDTH:
COMPLIANCE WITH
HDMI STANDARD:
PT-572+
POWER CONSUMPTION:
ON
HDMI
162
DIMENSIONS:
HD
MI
OU
T
12V
Display
ROOM
TECHNICAL SPECIFICATIONS
WEIGHT:
ACCESSORIES:
OPTIONS:
DC
CONNECTIVITY
INSTALLER
SOLUTIONS
CATALOG
1 HDMI connector.
1 UTP on an 9−pin terminal block.
4.95Gbps (1.65Gbps per graphic channel).
Supports HDMI and HDCP.
12V DC, 250mA (transmitter and receiver
together).
7.5cm x 15.7cm x 4.4cm
(2.95” x 6.18" x 1.73") W, D, H.
0.18kg (0.4lbs).
Power supply.
Kramer BC−DGKat524 (CAT 5 24 AWG),
BC−DGKat623 (CAT 6 23 AWG) and
BC−DGKat7a23 (CAT 7a 23 AWG) cables.
2014
www.kramerelectronics.com
F-121
Active Mounting Box − Computer Graphics Video & Stereo Audio over Twisted Pair Transmitter with EDID for Floor Boxes
$ s 8 []
The F-121 mounting box for Ackermann or Bettermann floor boxes
is a transmitter for computer graphics signals up to and exceeding
UXGA and unbalanced stereo audio. It converts the input signals into
a twisted pair signal that it transmits to a compatible twisted pair
receiver.
●●
HDTV Compatible.
●●
Max. Resolution - UXGA/1080p.
●●
EDID Programmable from FC-200.
●●
Power Connect™ System - A single connection to the transmitter
or the receiver powers both units when the devices are within 50m
(150ft) of each other.
●●
System Range - Up to 100m (320ft).
●●
Cable - UTP (unshielded twisted pair) or STP (shielded twisted pair)
such as CAT 5.
●●
Twisted Pair Connector - 8-pin terminal block.
●●
Modular Expandability - Includes room for two single or one dual
Kramer wall plate inserts (covered with blank inserts).
●●
Size - Suitable for mounting into Ackermann or Bettermann flush floor
service units.
VGA
Audio
CAT 5
Computer
Graphics
Source
TECHNICAL SPECIFICATIONS
XG
ne
Li
r
ve
ei
ec
R
22
-1
P
T
INPUTS:
io
ud
/A
AO
A
G
X
UT
LIN
E IN
AU
AN
DIO
OU
T
CAT 5
ALD
IF
O
G
S/P
DC
TP-122
Audio
Audio
12V
OUTPUT:
MAX. OUTOUT LEVEL:
RESOLUTION:
AUDIO BANDWIDTH:
DIFF. GAIN:
DIFF. PHASE:
K-FACTOR:
S/N RATIO:
COUPLING:
AUDIO THD + NOISE:
AUDIO 2nd HARMONIC:
POWER CONSUMPTION:
VGA
DIMENSIONS:
Display
Stereo Audio
Recorder
www.kramerelectronics.com
WEIGHT:
ACCESSORIES:
AV-Receiver
INSTALLER
SOLUTIONS
CATALOG
2014
1 UXGA on a 15−pin HD (F) connector;
1 unbalanced stereo audio on a 3.5mm mini jack.
1 UTP on an 8−pin terminal block.
Video: 1.9Vpp, Audio: 2.7Vpp.
Up to UXGA.
20kHz.
5.8%.
0.5Deg.
<0.05%.
Video: 60dB @5MHz, Audio: 71dB @1kHz.
Video: AC, Audio: AC.
0.04%.
0.001%.
12V DC, 340mA (feeding TP−112 or TP−122−od
receiver).
7.5cm x 15.7cm x 4.4cm (2.95” x 6.18" x 1.73")
W, D, H.
0.19kg (0.42lbs) approx.
Power supply.
ROOM
CONNECTIVITY
163
ROOM CONNECTIVITY
FEATURES
FLA-10
Wall Plate Insert Mounting Frame for OBO Bettermann Floor Boxes
The FLA-10 is a mounting structure that fits into an OBO Bettermann
GB3 Flush Floor Service Unit. The unit includes two FLA-2 (dual insert)
and one FLA-1F (single insert) modules, but can hold up to 5 modules.
FEATURES:
ROOM CONNECTIVITY
●●
Insert Capacity - Up to 2 double-slot or 4 single-slot wall plate inserts.
FLA-12
Wall Plate Insert Mounting Frame for GB2 OBO Bettermann Floor Boxes
The FLA-12 is a frame for mounting up to 2 double-slot or 4 single-slot
wall plate inserts into an OBO Bettermann GB2 floor box.
FEATURES:
●●
Insert Capacity - Up to 2 double-slot or 4 single-slot wall plate inserts.
FLA-13
Wall Plate Insert Mounting Frame for GB3 OBO Bettermann Floor Boxes
The FLA-13 is a frame for mounting up to 2 double-slot or 5 single-slot
wall plate inserts into an OBO Bettermann GB3 floor box.
FEATURES:
●●
164
ROOM
CONNECTIVITY
Insert Capacity - Up to 2 double-slot or 4 single-slot wall plate inserts.Insert
Capacity - Up to 2 double-slot or 5 single-slot wall plate inserts.
INSTALLER
SOLUTIONS
CATALOG
2014
www.kramerelectronics.com
ACCESSORIES
FLA-1F
Single−Slot Wall Plate Frame For FLA−10 Mounting Structure
The FLA-1F is a single-slot insert frame for mounting one single-slot wall
plate insert into a FLA-10 mounting structure.
FEATURES:
●●
Insert Capacity - 1 single-slot wall plate insert.
Dual−Slot Wall Plate Frame For FLA−10 Frame Mounting Structure
The FLA-2F is a dual-slot insert frame for mounting two single-slot or one
double-slot wall plate inserts into a FLA-10 mounting structure.
FEATURES:
●●
www.kramerelectronics.com
INSTALLER
Insert Capacity - 2 single-slot or 1 double-slot wall plate inserts.
SOLUTIONS
CATALOG
2014
ROOM
CONNECTIVITY
165
ROOM CONNECTIVITY
FLA-2F
INSERTS
SINGLE & DOUBLE INSERTS
COMPUTER (15-PIN HD)
F-110
ROOM CONNECTIVITY
Active Wall Plate Insert − Computer Graphics Video Line Transmitter
$s
The F-110 is a wall plate insert transmitter for computer graphics
video signals with resolutions up to and exceeding UXGA. It converts a
computer graphics video signal into a twisted pair signal that it transmits
to a TP-120 twisted pair receiver (or other compatible Kramer receiver).
FEATURES
●●
Max. Resolution - UXGA.
●●
Power Connect™ System - A single connection to the transmitter or the
receiver powers both units when the devices are within 150ft (50m) of
each other. All the system units must have the Power Connect system to
use this feature.
●●
Front Panel Connection - 15-pin HD (F) input.
●●
Rear Panel Connection - Terminal block.
●●
Sync Polarity Settings - H & V switches for improved display compatibility
with the twisted pair outputs.
●●
System Range - Up to 100m (320ft).
●●
Cable - UTP (unshielded twisted pair) or STP (shielded twisted pair) such
as CAT 5.
●●
Size - Dual slot wall plate insert.
TECHNICAL SPECIFICATIONS
INPUT:
OUTPUT:
RESOLUTION:
MAX. OUTPUT LEVEL:
DIFF. GAIN :
DIFF. PHASE:
K-FACTOR:
S/N RATIO:
CONTROLS:
COUPLING:
POWER CONSUMPTION:
DIMENSIONS:
WEIGHT:
ACCESSORIES:
1 VGA/UXGA on a 15−pin HD connector.
1 CAT 5 on an 8−pin terminal block connector.
Up to UXGA.
2Vpp.
6.3% (worst case).
0.3Deg (worst case).
<0.05%.
69.5dB , 5MHz.
ON power LED.
DC.
12V DC 250mA, feeding receiver.
5cm x 2.4cm x 4.7cm (1.97" x 0.94" 1.85") W, D, H.
0.14kg (0.31lbs) approx.
Power supply.
WX-3
Wall Plate Insert − 15−pin HD
$ []{_
Computer Graphics Video Dual Insert
FEATURES
166
ROOM
CONNECTIVITY
●●
Front Panel Connection - 15-pin HD (F).
●●
Rear Panel Connection - 2 6-pin terminal blocks.
●●
EDID PassThru - Passes EDID signals from source to display.
●●
Size - Dual slot wall plate insert.
INSTALLER
SOLUTIONS
CATALOG
2014
www.kramerelectronics.com
WX-2F
Wall Plate Insert − 15−pin HD (F/F)
$
Computer Graphics Video Wall Plate Insert
FEATURES
●●
Front Panel Connections - 15-pin HD (F).
●●
Rear Panel Connections - 15-pin HD (F).
●●
Size - Single slot wall plate insert.
ROOM CONNECTIVITY
WX-2M
Wall Plate Insert − 15−pin HD (M/M)
$
Computer Graphics Video Wall Plate Insert
FEATURES
●●
Front Panel Connections - 15-pin HD (M).
●●
Rear Panel Connections - 15-pin HD (M).
●●
Size - Single slot wall plate insert.
WX-FM
Wall Plate Insert − 15−pin HD (F/M)
$
Computer Graphics Video Wall Plate Insert
FEATURES
●●
Front Panel Connections - 15-pin HD (F).
●●
Rear Panel Connections - 15-pin HD (M).
●●
Size - Single slot wall plate insert.
WX-MF
Wall Plate Insert − 15−pin HD (M/F)
$
Computer Graphics Video Wall Plate Insert
FEATURES
www.kramerelectronics.com
INSTALLER
●●
Front Panel Connections - 15-pin HD (M).
●●
Rear Panel Connections - 15-pin HD (F).
●●
Size - Single slot wall plate insert.
SOLUTIONS
CATALOG
2014
ROOM
CONNECTIVITY
167
WX-F5B
Wall Plate Insert − 15−pin HD to 5 BNC Breakout
a$
Computer Graphics Video Wall Plate Insert
ROOM CONNECTIVITY
FEATURES
●●
Front Panel Connections - 15-pin HD (F).
●●
Rear Panel Connections - 5 BNC (F).
●●
Size - Single slot wall plate insert.
WX-1N
Wall Plate Insert − 15−pin HD (F) to Terminal Block
$
Computer Graphics Video Wall Plate Insert
FEATURES
●●
Front Panel Connections - 15-pin HD (F).
●●
Rear Panel Connections - 6-pole & 2-pole terminal block.
●●
Size - Single slot wall plate insert.
WXA-2P
Wall Plate Insert − 15−pin HD & 3.5mm Stereo Audio
$8
Computer Graphics Video & Stereo Audio Wall Plate Insert
FEATURES
●●
Front Panel Connections - 15-pin HD (F) & 3.5mm (F).
●●
Rear Panel Connections - 15-pin HD (F) & 3.5mm (F).
●●
Size - Dual slot wall plate insert.
WXA-2
Wall Plate Insert − 15−pin HD & 3.5mm Stereo Audio to Terminal Block
$8
Computer Graphics Video & Stereo Audio Wall Plate Insert
FEATURES
168
ROOM
CONNECTIVITY
●●
Front Panel Connections - 15-pin HD (F) & 3.5mm (F).
●●
Rear Panel Connections - 3-pin & 8-pin terminal blocks.
●●
Size - Dual slot wall plate insert.
INSTALLER
SOLUTIONS
CATALOG
2014
www.kramerelectronics.com
BNC
WBB
Wall Plate Insert − Dual BNC
B
Dual Composite Video Wall Plate Insert
FEATURES
Front Panel Connections - 2 BNC (F).
●●
Rear Panel Connections - 2 BNC (F).
●●
Size - Single slot wall plate insert.
●●
Colors Available - Black, white, grey.
ROOM CONNECTIVITY
●●
RCA
WRR
Wall Plate Insert − Dual RCA
o
Stereo Audio Wall Plate Insert
FEATURES
●●
Front Panel Connections - 2 RCA (F).
●●
Rear Panel Connections - 2 RCA (F).
●●
Size - Single slot wall plate insert.
WA-2N
Wall Plate Insert − Dual RCA
ov
Stereo Audio Wall Plate Insert
FEATURES
www.kramerelectronics.com
INSTALLER
●●
Front Panel Connections - 2 RCA (F).
●●
Rear Panel Connections - 4-pole terminal block.
●●
Size - Single slot wall plate insert.
SOLUTIONS
CATALOG
2014
ROOM
CONNECTIVITY
169
WAV-3
Wall Plate Insert − 3 RCA
Co
Audio & Video Wall plate Insert
ROOM CONNECTIVITY
FEATURES
●●
Front Panel Connections - 3 RCA (F).
●●
Rear Panel Connections - 3 RCA (F).
●●
Size - Dual slot wall plate insert.
WHC-3
Wall Plate Insert − 3 RCA
+
Component Video Wall Plate Insert
FEATURES
●●
Front Panel Connections - 3 RCA (F).
●●
Rear Panel Connections - 3 RCA (F).
●●
Size - Dual slot wall plate insert.
WR45
Wall Plate Insert − RCA & RJ−45
Cr
Composite Video & Ethernet Wall Plate Insert
FEATURES
170
ROOM
CONNECTIVITY
●●
Front Panel Connections - RCA (F) & RJ-45.
●●
Rear Panel Connections - RCA (F) & RJ-45.
●●
Size - Single slot wall plate insert.
INSTALLER
SOLUTIONS
CATALOG
2014
www.kramerelectronics.com
4-PIN (s-VIDEO)
W-S1
Wall Plate Insert − s−Video
-
s-Video Wall Plate Insert
FEATURES
Front Connections - 4-pin mini DIN (F).
●●
Rear Panel Connections - 4-pin mini DIN (F).
●●
Size - Single slot wall plate insert.
ROOM CONNECTIVITY
●●
WAS-3P
Wall Plate Insert − s−Video & Dual RCA
-o
s-Video & Stereo Audio Wall Plate Insert
FEATURES
●●
Front Panel Connections - 4-pin (F) s-Video and 2 RCA (F).
●●
Rear Panel Connections - 4-pin (F) s-Video and 2 RCA (F).
●●
Size - Dual slot wall plate insert.
WAS-3
Wall Plate Insert − s−Video & Dual RCA
-ov
s-Video & Stereo Audio Wall Plate Insert
FEATURES
●●
Front Panel Connections - 4-pin mini DIN (F) & 2 RCA (F).
●●
Rear Panel Connections - 3-pole & 4-pole terminal blocks.
●●
Size - Dual slot wall plate insert.
WAS-4
Wall Plate Insert − s−Video & 3 RCA to Terminal Block
C-ov
Composite Video, s-Video & Stereo Audio Wall Plate Insert
FEATURES
www.kramerelectronics.com
INSTALLER
●●
Front Panel Connections - 4-pin mini DIN (F) & 3 RCA (F).
●●
Rear Panel Connections - Two 4-pin terminal blocks.
●●
Size - Dual slot wall plate insert.
SOLUTIONS
CATALOG
2014
ROOM
CONNECTIVITY
171
HDMI
W-H
HDMI Wall Plate Insert
P
HDMI Wall Plate Insert
ROOM CONNECTIVITY
FEATURES
●●
Front Panel Connections - HDMI (F).
●●
Rear Panel Connections - HDMI cable (F).
●●
Size - Single slot wall plate insert.
DVI
W-DVI
Wall Plate Insert − DVI
G
DVI-I Wall Plate Insert
FEATURES
●●
Front Panel Connections - DVI-I (F).
●●
Rear Panel Connections - DVI-I cable (F).
●●
Size - Dual slot wall plate insert.
W-DVIA
Wall Plate Insert − DVI & 3.5mm Stereo Audio
G8
DVI-I & S/PDIF Audio Wall Plate Insert
FEATURES
172
ROOM
CONNECTIVITY
●●
Front Panel Connections - DVI-I (F) & 3.5mm (F) connectors.
●●
Rear Panel Connections - DVI-I cable (F) & 3.5mm cable (F).
●●
Size - Dual slot wall plate insert.
INSTALLER
SOLUTIONS
CATALOG
2014
www.kramerelectronics.com
DISPLAY PORT
W-DP
Wall Plate Insert − DisplayPort
F
Wall Plate Insert - DisplayPort.
FEATURES
Front Panel Connection - DisplayPort (F).
●●
Rear Panel Connection - DisplayPort cable (F).
●●
Size - Single slot wall plate insert.
ROOM CONNECTIVITY
●●
“F”
W-1F
Wall Plate Insert − F Connector
Z
"F" Connector Wall Plate Insert
FEATURES
●●
Front Panel Connection - F connector (F).
●●
Rear Panel Connection - F connector (F).
●●
Size - Single slot wall plate insert.
W-2F
Wall Plate Insert − Dual F Connector
Z
"F" Connector Wall Plate Insert
FEATURES
www.kramerelectronics.com
INSTALLER
●●
Front Panel Connections - 2 F connectors (F).
●●
Rear Panel Connections - 2 F connectors (F).
●●
Size - Single slot wall plate insert.
SOLUTIONS
CATALOG
2014
ROOM
CONNECTIVITY
173
3.5MM
WA-1PN
Wall Plate Insert − 3.5mm Stereo Audio
8
Stereo Audio Wall Plate Insert
ROOM CONNECTIVITY
FEATURES
●●
Front Panel Connection - 3.5mm (F).
●●
Rear Panel Connection - 3.5mm (F) on a 12cm (4.7") cable.
●●
Size - Single slot wall plate insert.
WA-1H
Wall Plate Insert − 3.5mm Stereo Audio to Terminal Block
8v
Stereo Audio Wall Plate Insert
FEATURES
●●
Front Panel Connection - 3.5mm (F).
●●
Rear Panel Connections - 3-pole terminal block.
●●
Size - Single slot wall plate insert.
WA-3N
Wall Plate Insert − Dual 3.5mm Stereo Audio to Terminal Block
8v
Dual Stereo Audio Wall Plate Insert
FEATURES
174
ROOM
CONNECTIVITY
●●
Front Panel Connections - 2 3.5mm (F).
●●
Rear Panel Connections - 6-pole terminal block.
●●
Size - Single slot wall plate insert.
INSTALLER
SOLUTIONS
CATALOG
2014
www.kramerelectronics.com
WA-45
Wall Plate Insert − 3.5mm Stereo Audio & RJ−45
8H
3.5mm & RJ-45 Pass-Through Wall Plate Insert
FEATURES
Front Connections - 3.5mm (F), RJ-45.
●●
Rear Connections - 3.5mm cable (F), RJ-45.
●●
Size - Single slot wall plate insert.
ROOM CONNECTIVITY
●●
WAV-1N
Wall Plate Insert − BNC & 3.5mm Stereo Audio to Terminal Block
B8v
Stereo Audio & Composite Video Wall Plate Insert
FEATURES
●●
Front Panel Connections - 3.5mm (F) & BNC (F).
●●
Rear Panel Connections - 2 3-pole terminal blocks.
●●
Size - Single slot wall plate insert.
WAV-1RP
Wall Plate Insert − RCA & 3.5mm Stereo Audio
C8
Composite Video & Stereo Audio Wall Plate Insert
FEATURES
www.kramerelectronics.com
INSTALLER
●●
Front Panel Connections - 3.5mm (F) & RCA (F).
●●
Rear Panel Connections - 3.5mm (F) & RCA (F).
●●
Size - Single slot wall plate insert.
SOLUTIONS
CATALOG
2014
ROOM
CONNECTIVITY
175
WAV-1R
Wall Plate Insert − RCA & 3.5mm Stereo Audio to Terminal Block
C8v
Composite Video & Stereo Audio Wall Plate Insert
ROOM CONNECTIVITY
FEATURES
●●
Front Panel Connections - RCA (F) & 3.5mm (F) connectors.
●●
Rear Panel Connections - 3-pole and 2-pole terminal blocks.
●●
Size - Single slot wall plate insert.
WAS-1N
Wall Plate Insert − s−Video & 3.5mm Stereo Audio to Terminal Block
-8v
s-Video & Stereo Audio Wall Plate Insert
FEATURES
176
ROOM
CONNECTIVITY
●●
Front Panel Connections - 4-pin mini DIN (F) & 3.5mm (F).
●●
Rear Panel Connections - 2 3-pole terminal blocks.
●●
Size - Single slot wall plate insert.
INSTALLER
SOLUTIONS
CATALOG
2014
www.kramerelectronics.com
XLR
WA-1XLF
Wall Plate Insert − XLR (F)
9
XLR Wall Plate Insert
FEATURES
Front Panel Connection - XLR 3-pin (F).
●●
Rear Panel Connections - Solder cups.
●●
Size - Dual slot wall plate insert.
ROOM CONNECTIVITY
●●
WA-1XLM
Wall Plate Insert − XLR (M)
9
XLR Audio Wall Plate Insert
FEATURES
www.kramerelectronics.com
INSTALLER
●●
Front Panel Connection - XLR 3-pin (M).
●●
Rear Panel Connections - Solder cups.
●●
Size - Dual slot wall plate insert.
SOLUTIONS
CATALOG
2014
ROOM
CONNECTIVITY
177
SPEAKER/VOLUME CONTROLLER
W-LM
Wall Plate Insert − Volume Control & On/Off Switch
ROOM CONNECTIVITY
v
The W-LM is a remote volume and mute control insert for frames,
TBUSes or floor boxes. The unit remotely controls the volume of any
Kramer power amplifier or preamplifier that has a remote volume control
port, such as the 908 and 912.
FEATURES
●●
Controls - Combined volume control and push-ON/push-OFF switch.
●●
Size - Single slot wall plate insert.
WSP-1
Wall Plate Insert − Loudspeaker
n
Loudspeaker Wall Plate Insert
FEATURES
●●
Front Panel Connections - 4-pole with clips.
●●
Rear Panel Connections - 4-pin terminal block.
●●
Size - Single slot wall plate insert.
TERMINAL BLOCK
WA-1N
Wall Plate Insert − 6−Pole Terminal Block
Terminal Block Wall Plate Insert
FEATURES
178
ROOM
CONNECTIVITY
●●
Front Panel Connections - 6-pole terminal block.
●●
Rear Panel Connections - 6-pole terminal block.
●●
Size - Single slot wall plate insert.
INSTALLER
SOLUTIONS
CATALOG
2014
www.kramerelectronics.com
9-PIN D-SUB (RS-232)
WD-2F
Wall Plate Insert − 9−pin D−sub (F/F)
d
Serial Control Wall Plate Insert
FEATURES
Front Panel Connections - 9-pin D-sub (F).
●●
Rear Panel Connections - 9-pin D-sub (F).
●●
Size - Single slot wall plate insert.
ROOM CONNECTIVITY
●●
WD-2M
Wall Plate Insert − 9−pin D−sub (M/M)
d
Serial Control Wall Plate Insert
FEATURES
●●
Front Panel Connections - 9-pin D-sub (M).
●●
Rear Panel Connections - 9-pin D-sub (M).
●●
Size - Single slot wall plate insert.
WD-FM
Wall Plate Insert − 9−pin D−sub (F/M)
d
Serial Control Wall Plate Insert
FEATURES
www.kramerelectronics.com
INSTALLER
●●
Front Panel Connections - 9-pin D-sub (F).
●●
Rear Panel Connections - 9-pin D-sub (M).
●●
Size - Single slot wall plate insert.
SOLUTIONS
CATALOG
2014
ROOM
CONNECTIVITY
179
WD-FM
Wall Plate Insert − 9−pin D−sub (M/F)
d
Serial Control Wall Plate Insert
ROOM CONNECTIVITY
FEATURES
●●
Front Panel Connections - 9-pin D-sub (M).
●●
Rear Panel Connections - 9-pin D-sub (F).
●●
Size - Single slot wall plate insert.
W-COM1
Wall Plate Insert − 9−pin D−sub (F) to Terminal Block
d
Serial Control Wall Plate Insert
FEATURES
180
ROOM
CONNECTIVITY
●●
Front Panel Connections - 9-pin D-sub (F).
●●
Rear Panel Connections - 5-pole terminal block.
●●
Size - Single slot wall plate insert.
INSTALLER
SOLUTIONS
CATALOG
2014
www.kramerelectronics.com
USB
WU-AB
Wall Plate Insert − USB (A/A)
[email protected]
USB Wall Plate Insert
FEATURES
Front Panel Connection - USB-A (F).
●●
Rear Panel Connection - USB-B cable (F).
●●
Size - Single slot wall plate insert.
ROOM CONNECTIVITY
●●
WU-AA
Wall Plate Insert − USB (A/A)
!
USB Wall Plate Insert
FEATURES
●●
Front Panel Connection - USB-A (F).
●●
Rear Panel Connection - USB-A cable (F).
●●
Size - Single slot wall plate insert.
WU-BA
Wall Plate Insert − USB (B/A)
[email protected]
USB Wall Plate Insert
FEATURES
www.kramerelectronics.com
INSTALLER
●●
Front Panel Connection - USB-B (F).
●●
Rear Panel Connection - USB-A cable (F).
●●
Size - Single slot wall plate insert.
SOLUTIONS
CATALOG
2014
ROOM
CONNECTIVITY
181
WU-BB
Wall Plate Insert − USB (B/B)
@
USB Wall Plate Insert
ROOM CONNECTIVITY
FEATURES
●●
Front Panel Connection - USB-B (F).
●●
Rear Panel Connection - USB-B cable (F).
●●
Size - Single slot wall plate insert.
RJ-45 (CAT 5/ETHERNET)
W4545
Wall Plate Insert − Dual RJ−45
rH
Dual Ethernet Wall Plate Insert
FEATURES
●●
Front Panel Connections - 2 RJ-45.
●●
Rear Panel Connections - 2 RJ-45.
●●
Size - Single slot wall plate insert.
W1145
Wall Plate Insert − RJ−45 & RJ−11
H
Ethernet & Telephone Wall Plate Insert
FEATURES
182
ROOM
CONNECTIVITY
●●
Front Panel Connections - RJ-11 & RJ-45.
●●
Rear Panel Connections - RJ-11 & RJ-45.
●●
Size - Single slot wall plate insert.
INSTALLER
SOLUTIONS
CATALOG
2014
www.kramerelectronics.com
CABLE PASS-THROUGH
WCP
Wall Plate Insert − Cable Pass−Through
Cable Pass-Through Wall Plate Insert
FEATURES
●●
Pass-Through - Accommodates cables up to 12.5mm in diameter.
●●
Size - Single slot wall plate insert.
Wall Plate Insert − Dual Cable Pass−Through
Dual Cable Pass-Through Wall Plate Insert.
FEATURES
●●
Pass-Through - Accommodates cables up to 9.5mm in diameter.
●●
Size - Single slot wall plate insert.
WCP-21
Wall Plate Insert − Two-Sized Cable Pass−Through
Two-Sized Cable Pass-Through Wall Plate Insert
FEATURES
●●
Pass-Through - Large pass-through accommodates a cable up to 12.5mm
in diameter, small pass-through accommodates a cable up to 9mm in
diameter.
●●
Size - Single slot wall plate insert.
BLANK COVER PLATE
W-BLANK
Wall Plate Insert − Blank Slot Cover Plate
Wall Plate Insert Slot
FEATURES
●●
Blank Cover Plate - For unused wall plate insert slot.
●●
Size - Single slot wall plate insert.
W-2BLANK
Wall Plate Insert − Double Blank Slot Cover Plate
Wall Plate Insert Slot
FEATURES
www.kramerelectronics.com
INSTALLER
●●
Blank Cover Plate - For 2 unused wall plate insert slots.
●●
Size - Double slot wall plate insert.
SOLUTIONS
CATALOG
2014
ROOM
CONNECTIVITY
183
ROOM CONNECTIVITY
WCP-2
CONTROL
RC-10TB
Wall Plate Insert − 1−Button Contact Closure Switch
ROOM CONNECTIVITY
X
The RC-10TB is a remote one-button contact closure switch, ideal for
remote control in boardrooms and conference rooms. It can be used
with the SID-X1 step-in commander or any other Kramer product with
contact closure control.
FEATURES
●●
Contact Closure Button - Remotely takes control of the input of a machine
via its remote contact closure terminal blocks.
●●
Companion Product for Step-In Commanders.
●●
Size - Single slot insert.
RC-20TB
Wall Plate Insert − 2−Button Contact Closure Switch
X
The RC-20TB is a two-button remote contact closure switcher. The wall
plate insert can be used with the VP-81SID step-in switcher or any other
Kramer product with momentary contact closure control.
FEATURES
●●
Two-Button Faceplate - 2 momentary buttons.
●●
Output Connectors - Terminal block.
●●
Size - Single slot wall plate insert.
POWER SUPPLIES (DC)
W-5PS
Wall Plate Insert − 5V or 12V DC Passive Distributor
D
The W-5PS is a five output DC distributor for 5V or 12V Kramer
products. The unit is ideal for powering up to five active units in a floor
box.
FEATURES
184
ROOM
CONNECTIVITY
●●
Input - 1 5V/12V DC on a 2-pin terminal block.
●●
Outputs - 5 5V/12V DC on 2-pin terminal blocks.
●●
Indicator - Power LED.
●●
Size - Dual slot wall plate insert.
INSTALLER
SOLUTIONS
CATALOG
2014
www.kramerelectronics.com
RACK ADAPTERS
RK-WP6
19-Inch Rack Adapter for Single Wall Plate Inserts
19-inch rack adapter for mounting 6 single slot wall plate inserts into a 1U rack space.
- Models compatible with the RK-WP6 are also compatible with RK-WP16.
RK-WP16
19-Inch Rack Adapter for Single & Double Wall Plate Inserts
19-inch rack adapter for wall plate inserts with 8 double slots that can hold 16 single or 8 double slot inserts in a 2U rack space.
www.kramerelectronics.com
INSTALLER
SOLUTIONS
CATALOG
2014
ROOM
CONNECTIVITY
185
ROOM CONNECTIVITY
FEATURES
●● Compatibility
SPEAKERS
SPEAKERS
SPK-C411(PAIR)
Closed−Back Ceiling Speakers (4 Ω )
SPEAKERS
n
The SPK-C411 is a pair of two-way, coaxial 4Ω speakers designed for mounting in the ceiling. The dual-driver coaxial speakers are
designed with a transformer and behind-the-grille power selector switch with either direct 4Ω or 70/100V room balancing.
FEATURES
TECHNICAL SPECIFICATIONS
●●Type
DESCRIPTION:
- 2-way coaxial speaker.
●●Woofer
- 4" polypropylene cone with rubber surround.
●●Tweeter
●●Impedance
●●Metal
- 4Ω.
Can Back - 4" depth.
●●Crossover
Frequency - 10kHz.
●●Sensitivity
- 85dB.
●●Frequency
Response - 55Hz to 20kHz.
●●Power
HIGH FREQUENCY DRIVER:
LOW FREQUENCY DRIVER:
- 1" Mylar dome.
IMPEDANCE:
DISPERSION COVERAGE:
CROSSOVER FREQUENCY:
NOMINAL SENSITIVITY:
DIRECTIVITY FACTOR (Q):
Rating - 20W nominal, 40W max.
●●Recommended
DIRECTIVITY INDEX (DI):
Amplifier Power - 20W.
●●UL
Listing - UL2043 - Fire test for heat and visible smoke
release for discrete products and their accessories installed in
air-handling spaces.
●●UL
DAMP - Certified for indoor use in pools, saunas, and
gymnasiums.
●●Dimensions
- External diameter: 25.1cm (9.89"); mounting
depth: 10.8cm (4.25"); cutout diameter: 22.3cm (8.78").
●●Weight
(Single Speaker) - 2.2kg (4.85lbs) approx.
●●Shipping
Weight (Pair) - 6kg (13.23lbs) approx.
●●Accessories
●●Package
- Ceiling mounting kit.
- 2 speakers (1 pair), template and user manual.
188
SPEAKERS
INSTALLER
SOLUTIONS
FREQUENCY RESPONSE:
INPUT POWER:
TRANSFORMER:
RECOMMENDED
AMPLIFIER POWER:
INPUT CONNECTOR:
WEIGHT PER SINGLE SPEAKER:
SHIPPING WEIGHT (FOR PAIR):
DIMENSIONS (OD):
CUTOUT SIZE
(MOUNT DIMENSION):
MOUNT DEPTH:
ACCESSORIES:
CATALOG
2014
2−way ceiling speakers with
metal can back.
1/2" Mylar dome tweeter.
4” polypropylene cone with rubber
surround woofer.
4Ω.
75° to 100° @2kHz.
6kHz.
84dB SPL @1m, 1W.
5.7 (averaged 100Hz to 10kHz);
6.8 (2kHz).
6.5dB (averaged 100Hz to 10kHz);
4.8dB (2kHz).
75Hz to 20kHz.
30W RMS,
80W continuous program.
70V - 3.7W/7.5W/15W/30W;
100V - 7.5W/15W/30W.
20W.
Terminal block.
2.75kg (6.06lbs) approx.
7.9kg (17.42lbs) approx.
25.1cm (9.89").
22.3cm (8.78").
11cm (4.33").
Ceiling mounting kit.
www.kramerelectronics.com
SPK-C412(PAIR)
Closed−Back Ceiling Speakers (8 Ω )
n
SPEAKERS
The SPK-C412 is a pair of two-way coaxial 8Ω speakers designed for mounting in the ceiling. The dual-driver coaxial speakers are
designed with a transformer and behind-the-grille power selector switch with either direct 8Ω or 70V/100V high-impedance inputs.
FEATURES
TECHNICAL SPECIFICATIONS
●●Type
DESCRIPTION:
- 2-way coaxial speaker.
●●Woofer
- 4” polypropylene cone with rubber surround.
●●Tweeter
●●Impedance
●●Metal
- 8Ω.
Can Back - 4” depth.
●●Crossover
Frequency - 10kHz.
●●Sensitivity
- 85dB.
●●Frequency
Response - 95Hz to 20kHz.
●●Power
HIGH FREQUENCY DRIVER:
LOW FREQUENCY DRIVER:
- 1” Mylar dome.
IMPEDANCE:
DISPERSION COVERAGE:
CROSSOVER FREQUENCY:
NOMINAL SENSITIVITY:
DIRECTIVITY FACTOR (Q):
Rating - 20W nominal, 40W max.
●●Recommended
DIRECTIVITY INDEX (DI):
Amplifier Power - 20W.
●●UL
Listed - UL2043 - Fire test for heat and visible smoke
release for discrete products and their accessories installed
in air-handling spaces.
●●UL
DAMP - Certified for indoor use in pools, saunas, and
gymnasiums.
●●Dimensions
- External diameter: 25.1cm (9.89"); mounting
depth: 10.8cm (4.25"); cutout diameter: 22.3cm (8.78").
●●Weight
(Single Speaker) - 2.2kg (4.85lbs) approx.
●●Shipping
Weight (Pair) - 6.0kg (13.23lbs) approx.
●●Accessories
●●Package
- Ceiling mounting kit.
- 2 speakers (1 pair), template and user manual.
www.kramerelectronics.com
INSTALLER
SOLUTIONS
FREQUENCY RESPONSE:
INPUT POWER:
TRANSFORMER:
RECOMMENDED
AMPLIFIER POWER:
INPUT CONNECTOR:
WEIGHT PER SINGLE SPEAKER:
SHIPPING WEIGHT (FOR PAIR):
DIMENSIONS (OD):
CUTOUT SIZE
(MOUNT DIMENSION):
MOUNT DEPTH:
ACCESSORIES:
CATALOG
2014
2−way ceiling speakers with
metal can back.
1/2" Mylar dome tweeter.
4” polypropylene cone with rubber
surround woofer.
8Ω.
75° to 100° @2kHz.
6kHz.
84dB SPL @1m, 1W.
5.7 (averaged 100Hz to 10kHz);
6.8 (2kHz).
6.5dB (averaged 100Hz to 10kHz);
4.8dB (2kHz).
75Hz to 20kHz.
30W RMS,
80W continuous program.
70V - 3.7W/7.5W/15W/30W;
100V - 7.5W/15W/30W.
20W.
Terminal block.
2.75kg (6.06lbs) approx.
7.9kg (17.42lbs) approx.
25.1cm (9.89").
22.3cm (8.78").
11cm (4.33").
Ceiling mounting kit.
SPEAKERS
189
SPK-C611(PAIR)
Two−Way Open−Back Round Ceiling Speakers
SPEAKERS
n
The SPK-C611 is a pair of two-way open-back speakers designed for mounting in the ceiling. They have an infinite baffle design and
aluminum grilles.
FEATURES
TECHNICAL SPECIFICATIONS
●●Type
DESCRIPTION:
HIGH FREQUENCY DRIVER:
LOW FREQUENCY DRIVER:
- 2-way coaxial round open-back ceiling speaker with infinite
baffle design.
●●Woofer
- 6.5" polypropylene cone.
●●Tweeter
- 1-inch ferro-fluid cooled.
●●Frequency
●●Impedance
●●Sensitivity
IMPEDANCE:
DISPERSION COVERAGE:
CROSSOVER FREQUENCY:
NOMINAL SENSITIVITY:
DIRECTIVITY FACTOR (Q):
Response - 55Hz to 20kHz.
- 8Ω.
- (SPL) 87dB (1W @1m with 1kHz).
●●Recommended
Power - RMS 30W, 60W max.
●●Grille
- White baffle with aluminum grilles with UV treatment
compliance. Locking arms for quick ceiling installation.
●●Installation
Bracket - SKIC (not included).
●●Dimensions
- External diameter: 22.8cm (8.98"); mounting
depth: 7.7cm (3.03"); cutout size: 19.8cm (7.8").
●●Package
●●Weight
- 2 speakers (1 pair), template and user manual.
(Single Speaker) - 1.15kg (2.54lbs) approx.
●●Shipping
Weight (Pair) - 3.3kg (7.3lbs) approx.
●●Package
- 2 speakers (1 pair), template and user manual.
190
SPEAKERS
INSTALLER
SOLUTIONS
DIRECTIVITY INDEX (DI):
FREQUENCY RESPONSE:
INPUT POWER:
RECOMMENDED
AMPLIFIER POWER:
INPUT CONNECTOR:
WEIGHT PER SINGLE SPEAKER:
SHIPPING WEIGHT (FOR PAIR):
DIMENSIONS (OD):
CUTOUT SIZE
(MOUNT DIMENSION):
MOUNT DEPTH:
ACCESSORIES:
CATALOG
2014
2−way open-back ceiling speakers.
1/2" Mylar dome tweeter.
6.5” polypropylene cone with rubber
surround woofer.
8Ω.
120° @2kHz.
3kHz.
84dB SPL @1m, 1W.
5.1 (averaged 100Hz to 10kHz);
6.2 (2kHz).
6.8dB (averaged 100Hz to 10kHz);
5.0dB (2kHz).
60Hz to 20kHz.
30W RMS,
80W continuous program.
30W.
Spring−type push terminal block.
1.15kg (2.54lbs) approx.
3.7kg (8.16lbs) approx.
23cm (9.06").
19.5cm (7.68").
7cm (2.76").
Ceiling mounting kit.
www.kramerelectronics.com
SPK-C612(PAIR)
Closed−Back Ceiling Speakers (8 Ω )
n
FEATURES
TECHNICAL SPECIFICATIONS
●●Type
DESCRIPTION:
- 2-way coaxial speaker.
●●Woofer
- 6.5” polypropylene cone with rubber surround.
●●Tweeter
●●Impedance
●●Metal
- 8Ω.
Can Back - 7" deep.
●●Crossover
Frequency - 3kHz.
●●Sensitivity
- 87dB.
●●Frequency
Response - 55Hz to 20kHz.
●●Power
HIGH FREQUENCY DRIVER:
LOW FREQUENCY DRIVER:
- 1” Mylar dome.
IMPEDANCE:
DISPERSION COVERAGE:
CROSSOVER FREQUENCY:
NOMINAL SENSITIVITY:
DIRECTIVITY FACTOR (Q):
Rating - 30W nominal, 60W max.
●●Recommended
DIRECTIVITY INDEX (DI):
Amplifier Power - 30W.
●●UL
Listed - UL2043 - Fire test for heat and visible smoke
release for discrete products and their accessories installed
in air-handling spaces.
●●UL
DAMP - Certified for indoor use in pools, saunas, and
gymnasiums.
●●Dimensions
- OD: 25.1cm (9.89"); cut-out size: 22.3cm
(8.78"); mount depth: 19.5cm (7.68”).
●●Weight
(Single Speaker) - 2.85kg (6.28lbs) approx.
●●Shipping
Weight (Pair) - 8kg (17.64lbs) approx.
●●Accessories
●●Package
- Ceiling mounting kit.
- 2 speakers (1 pair), template and user manual.
www.kramerelectronics.com
INSTALLER
SOLUTIONS
FREQUENCY RESPONSE:
INPUT POWER:
TRANSFORMER:
RECOMMENDED AMPLIFIER
POWER:
INPUT CONNECTOR:
WEIGHT PER SINGLE SPEAKER:
SHIPPING WEIGHT (FOR PAIR):
DIMENSIONS (OD):
CUT OUT SIZE
(MOUNT DIMENSION):
MOUNT DEPTH:
ACCESSORIES:
CATALOG
2014
2−way coaxial, low−profile ceiling
speakers with metal can back.
1" Mylar dome tweeter.
6.5” polypropylene cone with rubber
surround woofer.
8Ω.
80°.
3kHz.
87dB SPL @1m, 1W.
5.1 (averaged 100Hz - 10kHz);
6.2 (2kHz).
6.8dB (averaged 100Hz - 10kHz);
5.0dB (2kHz).
55Hz to 20kHz.
30W RMS,
80W continuous program.
70V - 3.7W/7.5W/15W/30W
100V - 7.5W/15W/30W.
30W.
Terminal block.
2.85kg (6.28lbs) approx.
8kg (17.64lbs) approx.
25.1cm (9.89").
22.3cm (8.78").
19.45cm (7.66").
Ceiling mounting kit.
SPEAKERS
191
SPEAKERS
The SPK-C612 is a pair of two-way coaxial 8Ω speakers designed for mounting in the ceiling. The dual-driver coaxial speakers are
designed with a transformer and behind-the-grille power selector switch with either direct 8Ω or 70/100V room balancing.
SPK-C613(PAIR)
Open−Back Ceiling Speakers
SPEAKERS
n
The SPK-C613 is a pair of two-way open-back 8Ω speakers designed for mounting in the ceiling. The speakers feature a multi-tap
power transformer for selecting direct 8Ω (bypassing the transformer) or 70V/100V power settings suitable for array installation.
FEATURES
TECHNICAL SPECIFICATIONS
●●Type
DESCRIPTION:
HIGH FREQUENCY DRIVER:
LOW FREQUENCY DRIVER:
- 2-way coaxial round open-back ceiling speaker with infinite
baffle design.
●●Woofer
- 6.5" polypropylene cone with rubber surround.
●●Tweeter
- 1/2-inch Mylar.
●●Frequency
●●Impedance
●●Sensitivity
- 8Ω.
- (SPL) 84dB (1W @1m with 1kHz).
●●Recommended
●●Grille
IMPEDANCE:
DISPERSION COVERAGE:
CROSSOVER FREQUENCY:
NOMINAL SENSITIVITY:
DIRECTIVITY FACTOR (Q):
Response - 60Hz to 20kHz.
Power - RMS 30W, 60W max.
- White baffle aluminum grilles.
●●Installation
DIRECTIVITY INDEX (DI):
Bracket - SKIC (not included).
●●Dimensions
FREQUENCY RESPONSE:
INPUT POWER:
●●Package
TRANSFORMER:
- External diameter: 23cm (9.06"); mounting depth:
7.5cm (2.95"); cutout size: 19.5cm (7.68").
●●Weight
- 2 speakers (1 pair), template and user manual.
(Single Speaker) - 1.65kg (3.65lbs) approx.
●●Shipping
RECOMMENDED
AMPLIFIER POWER:
INPUT CONNECTOR:
WEIGHT PER SINGLE SPEAKER:
SHIPPING WEIGHT (FOR PAIR):
DIMENSIONS (OD):
CUTOUT SIZE (MOUNT DIMENSION):
MOUNT DEPTH:
ACCESSORIES:
Weight (Pair) - 4.3kg (9.48lbs) approx.
192
SPEAKERS
INSTALLER
SOLUTIONS
CATALOG
2014
2−way open-back ceiling speakers.
1/2" Mylar dome tweeter.
6.5” polypropylene cone with rubber
surround woofer.
8Ω.
120° @2kHz.
3kHz.
84dB SPL @1m, 1W.
5.1 (averaged 100Hz to 10kHz);
6.2 (2kHz).
6.8dB (averaged 100Hz to 10kHz);
5.0dB (2kHz).
60Hz to 20kHz.
30W RMS,
80W continuous program.
70V - 3.7W/7.5W/15W/30W;
100V - 7.5W/15W/30W.
30W.
Spring−type push terminal block.
1.65kg (3.65lbs) approx.
4.3kg (9.48lbs) approx.
23cm (9.06").
19.5cm (7.68").
7.5cm (2.95").
Ceiling mounting kit.
www.kramerelectronics.com
SPK-C800-EDU
Complete K−overage ESD™ (Equal Sound Dispersion) Ceiling Speaker
n
FEATURES
TECHNICAL SPECIFICATIONS
●●Complete
INPUT POWER:
NOMINAL SENSITIVITY:
CROSSOVER FREQUENCY:
MEAN SPL:
FREQUENCY RANGE:
K-overage ESD™ - Patent pending design with
4 pivoting tweeters direct the sound, based on the room
environment, for equal sound dispersion (ESD).
●●Wide
Sound Dispersion - 180° range.
●●Minimizes
Speaker Installation - One Kramer ESD speaker
replaces multiple standard speakers for quick and easy
installation.
●●Excellent
Bass Response - Optimized for music and high-quality
voice reproduction.
●●Tweeters
- 4 pivoting 1” (25mm) 6Ω, titanium domes.
●●Woofer
- 8-inch 8Ω, paper cone.
●●Optional
Bass Port - For bass reflex effect.
●●Power
WEIGHT:
Frequency Response.
●●Depth
- Shallow 4-inch (approx. 100mm).
●●RoHS
Compliant.
TWEETER:
IMPEDANCE:
SENSITIVITY:
DIMENSIONS:
Rating - 40W RMS.
●●Smooth
SPEAKER TYPE:
WOOFER:
SHIPPING WEIGHT:
●●UL
Listed - UL2043 - Fire test for heat and visible smoke
release for discrete products and their accessories installed
in air-handling spaces.
ACCESSORIES:
40W RMS, 110W continuous program.
90dB SPL @1m.
2kHz.
90dB +/−1dB @1W−1m.
Nominal: 150Hz−20kHz, max:
100Hz−20kHz.
Two−way closed ceiling speaker.
8” (203mm) paper cone with rubber
surround.
4 x 1” (25mm) titanium dome pivoting
tweeter.
Woofer: 8Ω; tweeter: 6Ω.
90dB SPL @1W, 1m.
30cm x 60cm x 10cm (half tile), 60cm x
60cm x 10cm (full tile).
6.3kg (13.9lbs) approx. (half tile); 6.5kg
(14.3lbs) approx. (full tile).
7.8kg (17.2lbs) approx. (half tile); 8.0kg
(17.6lbs) approx. (full tile).
Ceiling mounting bracket for 30cm x 60cm.
●●Choice
of Models - Full tile 2' (60cm) x 2' (60cm) or half tile 1'
(30cm) x 2' (60cm) size, stereo or mono.
●●Accessories
●●Package
- Installation bracket (for half tile only).
- 1 speaker, template and user manual.
CONFIGURATIONS:
Model
Description
SPK-C816
Complete K-overage ESD® Ceiling Speakers Full-tile Stereo
SPK-C817
Complete K-overage ESD® Ceiling Speakers Full-tile Mono
SPK-C818
Complete K-overage ESD® Ceiling Speakers Half-tile Stereo
SPK-C819
Complete K-overage ESD® Ceiling Speakers Half-tile Mono
www.kramerelectronics.com
INSTALLER
SOLUTIONS
CATALOG
2014
SPEAKERS
193
SPEAKERS
The SPK-C800-EDU is an innovative, patent pending Kramer Complete K-overage ESD™ ceiling speaker. It is the only speaker in
the industry with built-in stereo separation. Constructed with a central driver and four pivoting tweeters in a sealed enclosure, the
Kramer Complete K-overage ESD™ provides unmatched sound response in a suspended ceiling device for the educational market
and is optimized for speech.
SPK-C800-PRO
Complete K−overage ESD™ (Equal Sound Dispersion) Ceiling Speaker
SPEAKERS
n
The SPK-C800-PRO is an innovative, patent pending Kramer Complete K-overage ESD™ ceiling speaker. It is the only speaker in
the industry with built-in stereo separation. Constructed with a central driver and four pivoting tweeters in a sealed enclosure, the
Kramer Complete K-overage ESD™ provides unmatched sound response for both voice and music in a suspended ceiling device for
the professional market.
FEATURES
TECHNICAL SPECIFICATIONS
●●Complete
INPUT POWER:
NOMINAL SENSITIVITY:
CROSSOVER FREQUENCY:
MEAN SPL:
FREQUENCY RANGE:
K-overage ESD™ - Patent pending design with
4 pivoting tweeters direct the sound, based on the room
environment, for equal sound dispersion (ESD).
●●Wide
Sound Dispersion - 180° range.
●●Minimizes
Speaker Installation - One Kramer ESD speaker
replaces multiple standard speakers for quick and easy
installation.
●●Excellent
Bass Response - Optimized for music and high-quality
voice reproduction.
●●Tweeters
●●Woofer
●●Power
- 4 pivoting 3/4" 6Ω with silk domes.
Rating - 40W RMS.
Frequency Response.
●●Depth
- Shallow 4" (approx. 100mm).
●●RoHS
Compliant.
TWEETER:
IMPEDANCE:
SENSITIVITY:
DIMENSIONS:
- 8" 8Ω polypropylene cone.
●●Smooth
SPEAKER TYPE:
WOOFER:
WEIGHT:
SHIPPING WEIGHT:
●●UL
Listed - UL2043 - Fire test for heat and visible smoke release
for discrete products and their accessories installed in airhandling spaces.
ACCESSORIES:
40W RMS, 110W continuous program.
87dB SPL @1m.
2kHz.
87dB +/−1dB @1W−1m.
Nominal: 80Hz−20kHz, max:
60Hz−20kHz.
Two−way closed-back ceiling speaker.
8” (203mm) polypropylene cone with
rubber surround.
4 x 3/4” (19mm) silk dome pivoting
tweeter.
Woofer: 8Ω; tweeter: 6Ω.
87dB SPL @1W, 1m.
30cm x 60cm x 10cm (half tile),
60cm x 60cm x 10cm (full tile).
6.3kg (13.9lbs) approx. (half tile);
6.5kg (14.3lbs) approx. (full tile).
7.8kg (17.2lbs) approx. (half tile);
8.0kg (17.6lbs) approx. (full tile).
Ceiling mounting bracket for 30cm x 60cm.
●●Choice
of Models - Size: full tile: 60cm x 60cm (24" x 24") or
half tile: 30cm x 60cm (12" x 12"), stereo or mono.
●●Accessories
●●Package
- Installation bracket (for half-tile only).
- 1 speaker, template and user manual.
CONFIGURATIONS:
Model
Description
SPK-C812
Complete K-overage ESD® Ceiling Speakers Full-tile Stereo
SPK-C813
Complete K-overage ESD® Ceiling Speakers Full-tile Mono
SPK-C814
Complete K-overage ESD® Ceiling Speakers Half-tile Stereo
SPK-C815
Complete K-overage ESD® Ceiling Speakers Half-tile Mono
SPK-C820
Complete K−overage ESD® Ceiling Speaker − 595m Stereo
194
SPEAKERS
INSTALLER
SOLUTIONS
CATALOG
2014
www.kramerelectronics.com
SPK-W511(PAIR)
2x30 Watt Powered On−Wall Speaker System
n
FEATURES
TECHNICAL SPECIFICATIONS
●●Frequency
Response - 50Hz to 20kHz.
●●Enclosure
- White molded plastic.
●●Grille
- Perforated metal (white).
●●Terminals
●●Brackets
●●Woofer
- Gold-plated 2-way binding posts.
- Painted steel with plastic knobs.
- 5.25” (133mm) polypropylene with rubber surround.
●●Tweeter
- 5/8" liquid-cooled polycarbonate.
●●Crossover
- First order high-pass.
●●Sensitivity
- 89dB 1W @1m.
●●Free
RECOMMENDED
AMPLIFIER POWER:
Air Resonant Frequency - 55Hz.
●●Nominal
●●Power
Impedance - 8Ω.
Handling - 30W RMS into 8Ω.
●●Dimensions
- 18.5cm x 16.5cm x 24.9cm (7.28” x 6.5” x 9.8”)
W, D, H.
●●Weight
(Single Speaker) - 2kg (4.4lbs) approx.
●●Shipping
DESCRIPTION:
FREQUENCY RESPONSE:
WOOFER:
TWEETER:
IMPEDANCE:
NOMINAL SENSITIVITY:
DIRECTIVITY FACTOR (Q):
DIRECTIVITY INDEX (DI):
POWER CAPACITY:
CROSSOVER FREQUENCY:
Weight (for Pair) - 4.6kg (10.14lbs) approx.
●●Package
- 2 speakers (1 pair), two mounting brackets (including
knobs and mounting screws), 4m 24 AWG black and white dual
color wire, user manual.
INPUT CONNECTORS:
MATERIALS:
OPERATING TEMPERATURE:
STORAGE TEMPERATURE:
HUMIDITY:
WEIGHT PER SINGLE
SPEAKER:
WEIGHT WITH
MOUNTING KIT:
ACCESSORIES:
OPTIONS:
COLORS:
INSTALLER
30W.
Gold−plated 2−way binding posts.
Steel frame, grill and brackets; ABS cabinet.
0° to +40°C (32° to 104°F).
−40° to +70°C (−40° to 158°F).
10% to 90%, RHL non−condensing.
2kg (4.4lbs) approx.
2.4kg (5.3lbs) approx.
SHIPPING WEIGHT (FOR PAIR): 4.8kg (10.6lbs) approx.
DIMENSIONS:
18.5cm x 16.5cm x 24.9cm
INSTALLATION CLEARANCE:
www.kramerelectronics.com
2−way on−wall speakers.
70Hz to 20kHz @−10dB.
5.25” (133mm) polypropylene cone.
0.51” (13mm) Mylar.
8Ω.
89dB 1W @1M.
3.3 (2kHz).
5.2dB (2kHz).
30W RMS, 80W continuous program.
Woofer − full range,
tweeter − high−pass @8kHz.
SOLUTIONS
CATALOG
2014
(7.28” x 6.5” x 9.8”), W, D, H.
With mounting brackets:
18.5cm x 16.7cm x 27cm
(7.28” x 6.6” x 10.6”), W, D, H.
Front panel to wall (with mounting bracket):
21cm (8.2”); back panel to wall (with
mounting bracket): 4.5cm (1.8”).
2 mounting brackets (including 4 knobs and
4 mounting screws).
BCP−2S speaker cable.
Available in white or black.
SPEAKERS
195
SPEAKERS
The SPK-W511 is a pair of high-performance speakers that can be mounted on the wall vertically or horizontally. The mounting
brackets are made of painted steel that can be attached to each speaker, letting you rotate each speaker to the left or right.
SPK-W611(PAIR)
Two−Way On−Wall Speakers
SPEAKERS
n
The SPK-W611 is a pair of two-way speakers designed for mounting on the wall. They have an acoustic suspension design and
aluminum grilles.
FEATURES
TECHNICAL SPECIFICATIONS
●●Frequency
Response - 45Hz to 20kHz.
●●Impedance
●●Tweeter
●●Woofer
TYPE:
FREQUENCY RESPONSE:
WOOFER:
- 6Ω.
- 1" (2.54cm) silk dome.
- 6.5" (16.5cm) polypropylene cone, rubber surround.
●●Crossover
- With 12dB/octave.
●●Crossover
Frequency - 4.3kHz.
●●Sensitivity
- 88dB, SPL 1 watt @1 meter with 1kHz.
●●Recommended
●●Grille
Power - 40W RMS to 80W max.
- Aluminum grilles with UV treatment compliance.
●●Dimensions
- 22.5cm x 22.3cm x 30.3cm (8.9” x 8.8” x 11.9”)
W, D, H.
●●Weight
(Single Speaker) - 2.6kg (5.7lbs) approx.
●●Shipping
WEIGHT:
Weight (Pair) - 5.6kg (12.3lbs) approx.
●●Accessories
●●Package
TWEETER:
CROSSOVER:
CROSSOVER FREQUENCY:
SENSITIVITY:
FREE AIR RESONANT
FREQUENCY:
NOMINAL IMPEDANCE:
INPUT POWER:
DIMENSIONS (including bracket):
- 2 mounting brackets (fixed and rotating).
- 2 speakers (1 pair), mounting brackets and user
ACCESSORIES:
manual.
196
SPEAKERS
INSTALLER
SOLUTIONS
CATALOG
2014
2−way speaker.
45Hz to 20kHz.
6.5” (16.5cm) polypropylene cone, rubber
surround.
1” (2.5cm) silk dome.
With 12dB/octave.
4.3kHz.
88dB (2.83V @1 meter).
55Hz.
6Ω.
40W RMS, 110W continuous program.
21.5cm x 23cm x 29.5cm
(8.5” x 9.1” x 11.6”) W, D, H.
One speaker: 2.6kg (5.7lbs) approx;
shipping weight for pair: 5.6kg
(12.3lbs) approx.
Two mounting brackets (fixed and
rotating).
www.kramerelectronics.com
SPK-W612(PAIR)
Three−Way On−Wall Speakers
n
FEATURES
TECHNICAL SPECIFICATIONS
●●Type
FREQUENCY RESPONSE:
WOOFER:
TWEETER:
PASSIVE:
SENSITIVITY:
NOMINAL IMPEDANCE:
INPUT POWER:
DIMENSIONS:
- 3-way on-wall speaker.
●●Woofer
- 16.5cm (6.5") with rubber surround.
●●Tweeter
●●Passive
- 2.5cm (1.0") polypropylene.
- 2.7cm (1.1") piezo dome.
●●Frequency
Response - 30Hz to 20kHz.
●●Impedance
●●Sensitivity
- 8Ω.
- (SPL) 88dB.
●●Recommended
●●Grille
Power - 80W RMS to 120W max.
WEIGHT:
- Aluminum grilles with UV treatment compliance.
●● Dimensions
- 19.3cm x 18.8cm x 25.98cm (7.6” x 7.4” x 10.23”)
ACCESSORIES:
W, D, H.
●●Weight
30Hz to 20kHz.
16.5cm (6.5") rubber surround.
2.5cm (1.0") polypropylene.
2.7cm (1.1") piezo dome.
88dB (2.83V @1 meter).
8Ω.
80W RMS, 220W continuous program.
19.3cm x 18.8cm x 25.98cm
(7.6” x 7.4” x 10.23”) W, D, H.
One speaker: 2.6kg (5.7lbs) approx; shipping
weight for pair: 5.6kg (12.3lbs) approx.
Two mounting brackets
(fixed and rotating).
(Single Speaker) - 2.6kg (5.7lbs) approx.
●●Shipping
●●Package
Weight (Pair) - 5.6kg (12.3lbs) approx.
- 2 speakers (1 pair), mounting brackets and user
manual.
www.kramerelectronics.com
INSTALLER
SOLUTIONS
CATALOG
2014
SPEAKERS
197
SPEAKERS
The SPK-W612 is a pair of three-way speakers designed for mounting on the wall. They have an acoustic suspension design and
aluminum grilles.
SPK-W613(PAIR)
Two−Way Open−Back Rectangular In−Wall Speakers
SPEAKERS
n
The SPK-W613 is a pair of two-way, open-back speakers designed for mounting in the wall. They have an infinite baffle design and
aluminum grilles.
FEATURES
TECHNICAL SPECIFICATIONS
●●Type
SPEAKER TYPE:
TWEETER:
WOOFER:
IMPEDANCE:
SENSITIVITY:
FREQUENCY RESPONSE:
POWER RATING:
RECOMMENDED
AMPLIFIER POWER:
WEIGHT PER SINGLE SPEAKER:
SHIPPING WEIGHT (FOR PAIR):
DIMENSIONS:
CUTOUT SIZE:
- 2-way component open-back in-wall speaker with infinite
baffle design.
●●Woofer
- 6.5" polypropylene cone.
●●Tweeter
- 1" ferro-fluid cooled.
●●Frequency
Response - 30Hz to 20kHz.
●●Impedance
●●Sensitivity
- 8Ω.
- 89dB 1W @1m with 1kHz SPL.
●●Recommended
Power - RMS 80W, 120W max.
●●Grille
- White baffle with aluminum grilles with UV treatment
compliance. Locking arms for quick in-wall installation.
●● Dimensions
- External: 30.5cm x 21.6cm x 8.9cm (12" x 8.5" x 3.5")
W, D, H; cutout size: 27.3cm x 18.54cm (10.75" x 7.3").
●●Weight
(Single Speaker) - 1.6kg (3.5lbs) approx.
●●Shipping
Weight (Pair) - 3.8kg (8.4lbs) approx.
●●Package
- 2 speakers (1 pair), template and user manual.
198
SPEAKERS
INSTALLER
SOLUTIONS
OPTIONS:
CATALOG
2014
2−way component.
1" ferrofluid cooled.
6.5" polypropylene cone.
8Ω.
89dB 1W 1m.
30Hz to 20kHz.
80W nominal, 120W max.
80W.
1.6kg (3.5lbs) approx.
3.8kg (8.4lbs) approx.
30.5cm x 21.6cm (12” x 8.5”).
27.3cm x 18.54cm
(10.75” x 7.3”).
Kramer SKIC mounting kit.
www.kramerelectronics.com
SPK-WA511(PAIR)
Two−Way On−Wall Speakers
n
SPEAKERS
The SPK-WA511 is a pair of powered two-way speakers designed for indoor wall mounting. The system accepts a line-level stereo
input and amplifies it using a built-in amplifier and outputs a speaker signal to the passive speaker.
FEATURES
●●Active
Loudspeaker - Stereo 2x30W RMS, 2x80W continuous
program amplifier and volume control.
●●Audio
Level Controls - Volume, treble and bass.
●●Magnetically
●●Enhanced
●●Indoor
in Black or White.
●●Mounting
Shielded.
Configuration - Active speaker: left, passive speaker:
right.
Bass Reflex.
●●Weight
Power - Shuts off when system is not in use, indicated by
a LED.
(Single Speaker) - Active speaker 2.7kg (5.95lbs)
approx., passive speaker 1.7kg (4.85lbs) approx.
●●Auto
●●Automatic
Wall Mounting.
●●Available
●●Package
- 2 speakers (1 pair), 1 pair of U-shaped rotating
mounting brackets with 4 mounting bracket screws, 3m power
cord, 4m loudspeaker cable and a 2m RCA cable, user manual.
Input Voltage Selector - 90 to 240V AC, 50 to 60Hz.
TECHNICAL SPECIFICATIONS
INPUTS:
OUTPUTS:
HIGH FREQUENCY DRIVER:
LOW FREQUENCY DRIVER:
IMPEDANCE:
DISPERSION COVERAGE:
CROSSOVER FREQUENCY:
NOMINAL SENSITIVITY:
DAMPING FACTOR:
DIRECTIVITY FACTOR (Q):
DIRECTIVITY INDEX (DI):
SPL MAX PEAK:
FREQUENCY RESPONSE:
S/N RATIO:
THD:
BUILT IN POWER AMPLIFIER:
Line level unbalanced stereo audio on a
3.5mm mini jack, line level balanced stereo
audio on a terminal block connector, line
level unbalanced stereo audio on left and
right RCA connectors.
Speaker (to connect to the external
passive speaker), 3.5mm mini jack lineout
for optional sub−woofer, looping output on
a 3.5mm mini jack.
1/2" Mylar dome tweeter.
5.25" polypropylene cone with rubber edge
woofer.
4Ω.
130° @2000Hz.
8000Hz.
85dB SPL @1m, 1W.
>100 @8Ω/400Hz.
5.8 (averaged 100Hz to 10kHz);
6.6 (2kHz).
7.6dB (averaged 100Hz to 10kHz);
8.2dB (2kHz).
110dB.
45Hz to 20kHz.
>83dB.
<0.2%.
2x30W RMS.
www.kramerelectronics.com
INSTALLER
Volume, bass and treble.
0.7W; input signal for system “wake−up”
from STANDBY mode: +8mV to +11mV.
90−240V AC, 50/60Hz (universal).
Frame, grill and brackets steel;
cabinet ABS.
WEIGHT PER SINGLE SPEAKER: Active speaker: 2.7kg (5.95lbs) approx.,
passive speaker 2.2kg (4.85lbs) approx.
WEIGHT WITH MOUNTING KIT: Active speaker: 3.1kg (6.83lbs) approx.,
passive speaker: 2.6kg (5.73lbs) approx.
SHIPPING WEIGHT (FOR PAIR): 6kg (13.23lbs) approx.
DIMENSIONS:
18.3cm x 17cm x 24.4cm
(7.2” x 6.7” x 9.6”) W, D, H;
18.3cm x 17.2cm x 26.5cm
(7.2” x 6.8” x 10.4”) W, D, H
(with mounting brackets).
INSTALLATION CLEARANCE:
Front panel to wall (with mounting bracket):
22cm (8.7in), back panel to wall (with
mounting bracket): 4.5cm (1.8in).
ACCESSORIES:
1 pair of U−shaped rotating mounting
brackets with 4 mounting bracket screws,
3m (9.84ft) power cord,
4m (13.12ft) loudspeaker cable and a
2m (6.6ft) 3.5mm to 2 RCA cable.
CONTROLS:
STANDBY MODE POWER
CONSUMPTION:
POWER SOURCE:
MATERIALS:
Available in white or black.
COLORS:
SOLUTIONS
CATALOG
2014
SPEAKERS
199
SKIC
SPEAKERS
Suspended Ceiling Speaker Mounting Kit
The SKIC is a kit for mounting a pair of SPK-C0608 speakers in suspended (drop) ceiling tiles.
FEATURES
●●Kit
Includes - 2 ceiling support rings (18.5cm c-rings to fit open 6.5" or closed 4” speakers) and 2 pairs of rails (to fit standard 60cm
(24") ceiling rails).
●●Use
- In place of the locking arms included with each speaker for standard ceiling installations.
●●Models
Included - The kit is included in the package of the SPK-CC444, SPK-CC448 and SPK-CC608 speakers.
SWM-1
Wall Mount Device for Cabinet Loud Speakers
Suitable for mounting all Kramer on-wall speakers.
FEATURES
●●Mounts
Cabinet Loudspeakers up to 5kg.
●●Versatile
Mounting Solution - Suitable for single/dual-point and
keyhole fixings.
TECHNICAL SPECIFICATIONS
MATERIALS:
MAXIMUM SPEAKER WEIGHT:
AVAILABLE COLORS:
DIMENSIONS:
WEIGHT:
200
SPEAKERS
INSTALLER
SOLUTIONS
CATALOG
2014
Metal, plastic, aluminum.
5kg (11lbs) per speaker.
Black and white.
8.8cm x 7.9cm x 7.2cmt,
(3.5” x 3.1” x 2.8”), W, D, H.
One wall mount: 0.19kg (0.42lbs)
approx.
Shipping weight (for pair): 0.55kg
(1.21lbs) approx.
www.kramerelectronics.com
PRODUCT INDEX
AD-A35M/2RF.............................100
AD-BF/BF....................................100
AD-BF/RM...................................100
AD-BM/2BFT................................100
AD-BM/2BFY...............................100
AD-BM/75...................................100
AD-BM/RF...................................100
ADC-DF/HM.................................101
ADC-DMA/5BF-1..........................101
ADC-DM/DF+GF............................101
ADC-DM/HF.................................101
ADC-DPM/DF...............................101
ADC-DPM/GF...............................101
ADC-DPM/HF...............................101
ADC-MDP/DF...............................101
ADC-MDP/GF...............................101
ADC-MDP/HF...............................101
AD-D9F/D9F................................100
AD-D9M/D9M..............................100
AD-DF/DF/RA..............................101
AD-DF/DF/RA-FLAT......................101
AD-DF/DM/RA.............................101
AD-DF/HM...................................100
AD-DM/GF...................................100
AD-DM/HF...................................100
AD-GF/GF....................................100
AD-GM/GF/RA.............................100
AD-GM/GM..................................100
AD-HF/HF....................................100
AD-HF/HF/RA..............................101
AD-HF/HF/RA-FLAT......................101
AD-HF/HM/RA.............................100
AD-RF/RF....................................100
BC-1T............................................16
BC-1T/LSHF...................................76
BC-1X..............................................7
BC-1X59..........................................8
BC-1X/LSHF(22AWG)-300M.......... 77
BC-2S............................................18
BC-2S/LSHF...................................78
BC-2T............................................17
BC-2X..............................................9
BC-3X............................................10
BC-3X2T7S ...................................15
BC-4X............................................11
BC-5X............................................12
BC-5X5S .......................................13
BC-5X26........................................14
BC‑5X/LSHF...................................79
BC-CAT5E/LSHF.............................80
BC-DGKat7a23...............................21
BC-DGKat524.................................19
BC-DGKat623.................................20
BCP-1T .........................................66
BCP-2T .........................................67
BCP-5X-SOLID.................................65
BCP-DGKat724...............................68
BC-RG63G........................................6
BC-STP..........................................23
BC‑XTP..........................................22
BC-XTP/LSHF.................................81
C-2LC/2LC.....................................56
C-2RAM/2RAM..............................60
C-3RVAM/3RVAM..........................37
C-3RVM/3RVM..............................36
C-4FDM/4FDM...............................50
C-4LC/4LC ....................................56
C-5BM/5BM..................................34
C-5RVAM/5RVAM..........................38
C-A35M/2IRE ................................62
C-A35M/2RAM & C-A35F/2RAM.....59
C-A35M/A35F...............................58
C-A35M/A35M..............................58
C-A35M/D9F.................................62
C-A35M/IRE ..................................62
C-A35M/IRR..................................63
CABLE PULL SLEEVE......................107
C-AC/POWERCORD.......................120
C-AFDM/AFDM...............................49
C-AS35M/AS35F............................59
C-BM/BM......................................33
CC-BNC/RCA/F............................104
CCR-BNC......................................105
CCR-RJ45....................................105
C-D9F/3PM.................................101
C-DGK6/DGK6................................64
C-DMA/5BM..................................51
C‑DM/DM......................................47
C-DM/DM/FLAT(W)........................48
www.kramerelectronics.com
C-DM/DM/xl................................ 47
C-DPM/DPM..................................52
C-DPM/HM....................................53
C-FM4/FM4...................................54
C-FM6/FM4...................................54
C-FM6/FM6...................................55
C-FM9/FM9...................................55
C-FODM/FODM...............................48
C‑FODPM/FODPM...........................52
C-FOHM/FOHM...............................45
C-GM/3RVM & C-GM/3RVF ............31
C-GM/5BM & C-GM/5BF & C-GF/5BM
& C-GF/5BF...................................32
C-GMAC/GMAC..............................30
C-GMA/GMA..................................27
C-GMA/GMA(45)............................28
C-GMA/GMA(90)............................29
C-GMA/GMA(90-UP)........................29
C-GM/GM(45)................................25
C-GM/GM(90)................................26
C-GM/GM(90-UP)............................26
C-GM/GM & C-GM/GF.....................24
C-GM/xl.........................................27
C‑HM/DM......................................46
C‑HM/HM......................................41
C-HM/HM/A-C...............................45
C-HM/HM/A-D...............................46
C-HM/HM/ETH..............................41
C-HM/HM/FLAT/ETH.....................43
C-HM/HM/FLAT-KRTL................... 43
C-HM/HM-KRTL........................... 42
C-HM/HM/PRO..............................42
C-IRR/HDR4F-KIT............................63
CLS-DM/DM...................................83
CLS-GMA/GMA...............................82
CLS-GM/GM...................................82
CLS-HM/HM/ETH...........................83
C-MBM/MBM.................................33
C-MDMA/MGMA.............................50
C-MDP/HM....................................53
C-MGMA/MGMA.............................28
C-MGM/MGM.................................25
C-MH1/MH1..................................30
C-MHMA/MHMA............................44
C-MHM/MHM................................44
C-MHWP500..................................31
C-MRVM/MRVM.............................35
COLOR RINGS...............................106
CON-HD15...................................106
CP‑2RAM/2RAM............................75
CP-3RVAM/3RVAM.........................73
CP-A35M/A35M............................74
CP-DGK6/DGK6..............................75
CP-GM ..........................................71
CP-GMA/GMA/xl............................70
CP-GM/GM/xl ...............................69
CP-GM-XX-5BMKIT...........................71
CP-HM/HM/ETH.......................... 73
CP-MH1/MH1/xl............................72
C-R3VM/R3VM..............................36
C-R4VM/R4VM..............................37
C-RVM/RVM..................................35
C-SC/SC/OM3...............................57
C-SF/2RVM & C-SM/2RVM.............40
C-SM/2BM & C-SM/2BF.................40
C-SMA/SMA...................................39
C-SM/SM.......................................39
CTW-BNC.....................................105
C-UAM/DC35-3............................101
C-XLQM/XLQF................................61
F-010..........................................160
F-021..........................................161
F-110..........................................166
F-121..........................................163
F-571..........................................162
FERRITE CORES.............................107
FLA-1F.........................................165
FLA-2F.........................................165
FLA-10.........................................164
FLA-12.........................................164
FLA-13.........................................164
FRAME-1G ...................................129
FRAME-2G ...................................129
K-ABLE-BOX..................................121
K-POD301....................................123
OWB-1G.......................................159
OWB-2G.......................................159
OWB-3G.......................................159
RapidRun®................................... 84
INSTALLER
SOLUTIONS
RC-10TB......................................184
RC-20TB......................................184
RG‑6 BNC.....................................103
RG‑6 RCA.....................................103
RK-2WP.......................................158
RK-22WP.....................................158
RK-121WP...................................158
RK-WP6.......................................185
RK-WP16.....................................185
RR-AN......................................... 85
RR-CA-DM.................................... 93
RR-CA-DMA.................................. 94
RR-CA-HM.................................... 95
RR-C-DM...................................... 92
RR-C-DMA.................................... 93
RR-C-GM...................................... 87
RR-C-GMA.................................... 87
RR-C-HM...................................... 95
RR-C-MH1.................................... 88
RR-DG......................................... 90
RRP-AN....................................... 86
RRP-DG....................................... 91
RR-PS-HM.................................... 99
RR-WPA-DF.................................. 97
RR-WPA-DFA................................ 97
RR-WPA-HF.................................. 98
RR-WP-DF.................................... 96
RR-WP-DFA.................................. 96
RR-WP-GF.................................... 89
RR-WP-GFA.................................. 89
RR-WP-HF.................................... 98
RR-WP-MH1................................. 89
RTBUS-11....................................124
RTBUS-12....................................125
RTBUS-21....................................126
SKIC............................................200
SPK-C411(PAIR)............................188
SPK-C412(PAIR)............................189
SPK-C611(PAIR)............................190
SPK-C612(PAIR)............................191
SPK-C613(PAIR)............................192
SPK-C800-EDU..............................193
SPK-C800-PRO..............................194
SPK-W511(PAIR)...........................195
SPK-W611(PAIR)...........................196
SPK-W612(PAIR)...........................197
SPK-W613(PAIR)...........................198
SPK-WA511(PAIR).........................199
SWM-1........................................200
T1AF...........................................117
T-2INSERT....................................122
T3F.............................................118
T4F.............................................118
T5F.............................................119
T6F.............................................119
T10F...........................................119
TBUS-1Axl....................................110
TBUS-3xl......................................111
TBUS-4xl......................................112
TBUS-5xl......................................113
TBUS-6xl......................................114
TBUS-10xl....................................115
TBUS-201xl................................ 127
TL-B/CRIMP.................................102
TL-B/REM....................................102
TL-LCT.........................................102
TL-STRIP......................................102
TL-STRIP/C..................................102
TL-WS.........................................102
T-RC.......................................... 122
TS-Power-Socket............................120
T-TBLANK.....................................122
UTBUS-1xl....................................116
VA-122........................................100
VPM-2.........................................134
W-1F...........................................173
W-2BLANK...................................183
W-2F...........................................173
W-5PS.........................................184
W1145.......................................182
W4545.......................................182
WA-1H........................................174
WA-1N........................................178
WA-1PN......................................174
WA-1XLF.....................................177
WA-1XLM....................................177
WA-2N........................................169
WA-3N........................................174
WA-20N......................................132
CATALOG
2014
WA-21N......................................132
WA-22N......................................133
WA-23N......................................133
WA-45.........................................175
WAP-1.........................................148
WAS-1N......................................176
WAS-3.........................................171
WAS-3P.......................................171
WAS-4.........................................171
WAV-1N......................................175
WAV-1R.......................................176
WAV-1RP.....................................175
WAV-2.........................................153
WAV-3.........................................170
WAV-5.........................................150
WAV-5C.......................................151
WAV‑5H.......................................154
WAV-5YC.....................................151
WAV-6H.......................................155
WAV-6UBA...................................152
WAV-6YC.....................................152
WAV-645.....................................152
WAV-DA1.....................................156
WAV-DA2.....................................156
WBB...........................................169
W-BLANK.....................................183
W-COM1......................................180
WCP...........................................183
WCP-2.........................................183
WCP-21.......................................183
WD-2F.........................................179
WD-2M........................................179
WD-FM........................................179
WD-FM........................................180
W-DP..........................................173
W-DVI..........................................172
W-DVIA........................................172
W-H............................................172
WHC-3........................................170
W-LM..........................................178
WP-3TB ......................................129
WP-27/WP-28.............................130
WP-101.......................................137
WP-110.......................................138
WP-120.......................................139
WP-121.......................................140
WP-209.......................................141
WP-210.......................................142
WP-210A.....................................143
WP-211DS...................................144
WP-220.......................................145
WP-230.......................................146
WP-301xl.....................................147
WP‑H1M......................................154
WP‑H2M......................................154
WPN-11......................................135
WPN-12......................................136
WPX-3.........................................149
WR45.........................................170
WRR...........................................169
W-S1...........................................171
WSP-1.........................................178
WU-AA........................................181
WU-AB........................................181
WU-BA........................................181
WU-BB........................................182
WV-11N......................................131
WV-12N......................................131
WV-20N......................................131
WVS-1.........................................153
WVS-2.........................................153
WX-1N........................................168
WX-2F.........................................167
WX-2M........................................167
WX-3...........................................166
WXA-1.........................................150
WXA-2.........................................168
WXA-2P.......................................168
WXA-3.........................................150
WXA-H........................................155
WX-F5B.......................................168
WX-FM........................................167
WXL-1FM.....................................157
WXL-2F.......................................157
WXL-2M......................................157
WX-MF........................................167
WXV-1.........................................149
PRODUCT
New products colored in red
INDEX
201
202
NOTES
INSTALLER
SOLUTIONS
CATALOG
2014
www.kramerelectronics.com
NOTES
INSTALLER
SOLUTIONS
CATALOG
2014
www.kramerelectronics.com
203
204
NOTES
INSTALLER
SOLUTIONS
CATALOG
2014
www.kramerelectronics.com
NOTES
INSTALLER
SOLUTIONS
CATALOG
2014
www.kramerelectronics.com
205
206
NOTES
INSTALLER
SOLUTIONS
CATALOG
2014
www.kramerelectronics.com
NOTES
INSTALLER
SOLUTIONS
CATALOG
2014
www.kramerelectronics.com
207
208
NOTES
INSTALLER
SOLUTIONS
CATALOG
2014
www.kramerelectronics.com
INSTALLER SOLUTIONS
KRAMER ELECTRONICS, Ltd.
3 Am VeOlamo St.
Jerusalem, Israel, 95463
Tel: + 972 732650200
Fax: + 972 2 653 5369
E-mail:[email protected]
Web:www.kramerelectronics.com
KRAMER ELECTRONICS SWEDEN AB
Arendalsvägen 22
434 39 Kungsbacka, Sweden
Tel: + 46 300 43 18 10
Fax: + 46 300 43 17 19
E-mail:[email protected]
Web:www.kramersweden.com
KRAMER ELECTRONICS USA, Inc.
HEADQUARTERS
6 Route 173 West
Clinton, NJ 08809, USA
Tel: (908) 735 0018
(888) 275 6311
Fax: (908) 735 0515
Tech Support after 6pm EST:
(888) 275 6311
E-mail:[email protected]
Web:www.kramerus.com
KRAMER ELECTRONICS FINLAND
Höyläämötie 10, Helsinki,
00380, Finland
Tel: + 358 (0)9 315 79220
E-mail:[email protected]
Web:www.kramerav.fi
SIERRA VIDEO INTERNATIONAL,
SALES & TECHNICAL SUPPORT
PO Box 2462, Grass Valley, CA, 95945, USA
Toll-free: (888) 886-8875
Tel: (530) 478-1000
Fax: (530) 478-1105
E-mail:[email protected]
Tech Support – Worldwide:
Tel: (530) 478-1000
After Hours: (530) 888-3195
E-mail:[email protected]
Web:www.sierravideo.com
KRAMER ELECTRONICS EUROPE SA
Rue du Roussart, 2
B-1410 Waterloo, Belgium
Tel: + 32 2 357 01 40
Fax: + 32 2 357 01 49
E-mail:[email protected]
KRAMER ELECTRONICS UK, Ltd.
2 Premus, Coldharbour Way,
Aylesbury, Bucks. HP19, 8AP, UK
Tel: + 44 1296 330011
Fax: + 44 1296 330055
E-mail:[email protected]
Web:www.kramerelectronics.co.uk
KRAMER ELECTRONICS FRANCE S.A.S.
Z.I de la Bonde - Parc de la Roseraie - Bat F
15 rue du Buisson aux Fraises,
91300 Massy, France
Tel: + 33 (0)1 69 75 29 80
Fax: + 33 (0)1 60 11 76 94
E-mail:[email protected]
Web:www.kramerfrance.com
KRAMER ELECTRONICS ITALIA S.R.L.
Via Cesare Cantù, 25
20092 Cinisello Balsamo(MI), Italy
Tel: + 39 02 66594771
Fax: + 39 02 61296221
E-mail:[email protected]
Web:www.krameritalia.com
KRAMER ELECTRONICS ESPAÑA S.L.
C/ Sierra De Gata 9 Nave 4
San Fernando De Henares
28830 Madrid, Spain
Tel: + 34 917478410
Fax: + 34 917473409
E-mail:[email protected]
Web:www.kramerspain.com
KRAMER GERMANY GMBH
An Fürthenrode 59
52511 Geilenkirchen, Germany
Tel: + 49 (0) 2451 91161 0
Fax: + 49 (0) 2451 91161 10
E-mail:[email protected]
Web:www.kramergermany.com
KRAMER ELECTRONICS SWITZERLAND AG
Sägereistrasse 7
8834 Schindellegi SZ, Switzerland
Tel: + 41 (0)44 787 04 04
Fax: + 41 (0)44 787 04 05
E-mail:[email protected]
Web:www.kramerav.ch
Cat. no. 2902-000772
KRAMER ELECTRONICS POLSKA SP. Z O.O.
ul.Okrzei 1 A
03 -715 Warszawa, Poland
Tel: + 48 22 333 80 31
Fax: + 48 22 333 80 30
E-mail:[email protected]
Web:www.kramerpoland.com
KRAMER ELECTRONICS CANADA, Ltd.
4450 Corporate Drive, Unit 5
Burlington, ON, Canada
L7L 5R3
Tel: (905) 592-9739
Fax: (905) 592-9762
E-mail:[email protected]
Web:www.kramercanada.ca
KRAMER ELECTRONICS MEXICO
Félix Parra No. 171
Col. San José Insurgentes
03900 México D.F.
Tel: + 52 (55) 5523 0604
+ 52 (55) 5523 0629
Fax: + 52 (55) 5543 5945
E-mail:[email protected]
Web:www.kramermexico.com
KRAMER LATIN AMERICA
Tel: + 1 305 600 4726
Tel: + 1 212 300 5188
E-mail:[email protected]
Web: www.kramerlatinamerica.com
KRAMER DO BRASIL COMÉRCIO
DE ELETRÔNICOS LTDA
Av. Lacerda Franco, 1550, Cambuci
São Paulo, SP, 01536-001, Brasil
Tel: + 55 11 3926-9435
E-mail:[email protected]
Web: www.kramerbrazil.com
KRAMER ELECTRONICS CHINA
Rm 1405, NO.798 Zhao Jia Bang Rd,
Shanghai 200030, China
Tel: + 86 21 64453139,
+ 86 21 64453136
Fax: + 86 21 64455934
E-mail:[email protected]
Web:www.kramerchina.com
KRAMER ELECTRONICS KOREA
#201 HyeopSung Bldg
309-148, Seongsu-dong 2Ga,
Seongdong-gu
Seoul, Korea
Tel: + 82 2 467 4747
Fax: + 82 2 467 4750
E-mail:[email protected]
Web:www.kramerkorea.com
KRAMER ELECTRONICS HONG KONG, Ltd.
Unit 302A, 3rd Floor, Park Building,
No. 476 Castle Peak Road
Kowloon Hong Kong
Tel: + 852 3698 2972-4
Fax: + 852 3698 2975
E-mail:[email protected]
Web:www.kramerelectronics.com
KRAMER ELECTRONICS INDIA PVT, Ltd.
Unit - 102, 1st Floor,
18/9, Saleh Centre,
Cunningham Road,
Bangalore - 560052
Karnataka, India.
Tel: + 91 80 4148 5388
Fax: + 91 80 4148 5387
E-mail:[email protected]
Web:www.kramerindia.com
IN ST A L L E R SOL UT ION S CA T AL O G 2 0 1 4
CATALOG 2014
INSTALLER SOLUTIONS
CATALOG 2014
KRAMER ELECTRONICS AUSTRALIA Pty, Ltd.
Unit 3/1-5, Knobel Court
Shailer Park, 4128, QLD
Brisbane, Australia
Tel: + 61 7 38 06 4290
Fax: + 61 7 38 06 4295
E-mail:[email protected]
Web:www.krameraustralia.com.au
KRAMER ELECTRONICS NEW ZEALAND, Ltd.
Unit 4B, 89B Ellice Road
Wairau Valley, 0629
Auckland, New Zealand
Tel: + 64 9 215 8083
Fax: + 64 9 929 3408
E-mail:[email protected]
Web:www.krameraustralia.com.au
KRAMER ELECTRONICS CHILE SPA
Avenida Vitacura 2909 Of. 811
Las Condes, 7550024 Santiago, Chile
Tel: + 56 2 2953 0660
Fax: + 56 2 2953 0661
E-mail:[email protected]
Web:www.kramer.cl
KRAMER ELECTRONICS ARGENTINA
Tel: + 54 (11) 4554 4621
Cel: + 54 (911) 6398 7576
Arg.: 011 15 6398 7576
Nextel:593*476
E-mail:[email protected]
Web:www.kramerargentina.com
KRAMER ELECTRONICS COLOMBIA
Tel.: + 57 (1) 510 0376
Cel: + 57 (320) 455 1070
E-mail:[email protected]
Web:www.kramercolombia.com
KRAMER ASIA PACIFIC Pte, Ltd.
69 Ubi Crescent,
#03-06/07 CES Building
Singapore 408561
Tel: + 65 6274 4474
Fax: + 65 6274 4414
E-mail:[email protected]
Web:www.kramerasia.com
DISTRIBUTED BY
BUILDING THE FUTURE AV WORLD
WWW.KRAMERELECTRONICS.COM
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement