- Industrial & lab equipment
- Electrical equipment & supplies
- Power conditioning
- Power supply units
- User manual
advertisement
HPRi Series Single Phase 50 Hz
Up to 110 kVA 220 Vac Output
220 VDC Modular Inverter System
The Philtek HPRi Modular Inverter
System features both Expandable and
Redundant capabilities
The System is comprised of:
Inverter Modules “Plug and Play”
•
5 KVA or 10 KVA output each
•
High frequency PWM technology, quiet operation
•
Parallel connected with automatic load sharing
•
“Hot Pluggable”, allows addition or removal of modules without de-energizing the system
•
Output compatible with Active Power Factor
Corrected AC Loads
Static Bypass Switch and Controller
•
2 mSec transfer time
•
Microprocessor Controlled with LCD display and
Industrial style LED Mimic Diagram
•
User configured to operate in the On-line (Inverter preferred) or the Off-line (AC line preferred) mode
•
Provides an additional level of redundancy when operated in the On-line Mode
•
Plug in modular construction, can be removed or installed with no output interruption during
Maintenance Bypass
•
Optional RS-232 Communication Port available
AC Power Plant
•
Constructed of heavy duty 23” Racks
•
Make Before Break Maintenance Bypass Switch provides uninterrupted output during bypass
•
AC line Circuit Breaker for overload protection during Static Bypass
•
Fully enclosed AC and DC power bus bars, prewired to terminal blocks for external connections, simplifies installation
•
Docking tray provides easy plug-in and removal of
Inverter Module, will accept either a 5 kVA or a 10 kVA module
•
Compact design, 25 KVA system is only 24.5” x
29” in foot print and 84” in height
Plug in Static Switch
and controller Module
Inverter
Docking
Tray
Plug and Play
Inverter
Modules
AC Power Plant
Rack
Maintenance Bypass
Switch and AC Breaker
AC-DC bus bar and connection shroud
Inverter System as shown above:
25 kVA Single Phase Output
System Specifications
(Subject to change without notice)
DC Input
Nominal
Range
Current
220 V
196 to 267 V
See Table
Bypass AC
Connection
Phase
Frequency
Static Bypass Switch
Transfer Time
Inverter System AC Output
Power See Table
Connection
Voltage
Regulation
Dynamic:
100 % step load
Recovery
Efficiency
Distortion ( linear load )
Non Linear Load Capability
Active P.F. Corrected Loads
Load Power Factor ( PF )
2 wires + Gnd
220 V
± 1%
± 4%
< 10 mSec
91 %
< 1.0 % THD
Up to 100 %
Compatible
1.0
Voltage Tolerance
Frequency Tolerance
Overload:
Environmental
Temperature
Humidity
Cooling
Frequency Tolerance
Synchronization:
Range
Rate
± 0.1 % free running
± 1.5 Hz
1 Hz per Sec
Inverter Modules
Output
5 kVA
10 kVA
2 wires + Gnd
Single
50 Hz
2.5 mSec typical
5 mSec maximum
± 10 %
± 1.5 Hz
120 % for 10 Minutes
1000 % for 8 ms
0º C to 40º C
95 % RH
Forced Air with temperature
Controlled Fans
Model #
HPRi-INV-5K-220-A
HPRi- INV-10K-220-A
Inverter System 220 VDC Input 220 VAC 50 Hz Single Phase Output
Output VA @ 1.0 PF 25,000 VA 50,000 VA
AC Power Plant + Controller Model #
110,000 VA
Inverter Modules Required
AC Output Current
HPRi 25K-220-A
1 x 5 KVA + 2 x 10 KVA
114 Amp
HPRi 50K-220-A+RA HPRi 110K-220-A+4RA
5 x 10 KVA 11 x 10 KVA
228 Amp 500 Amp
DC Input Current @ 196 V
AC Power Plant Racks
Overall Dim. W”xD”xH”
Total Weight ( Net ) Lbs
140 Amp
1
24.5 x 29 x 84
1,300
280 Amp
2*
49 x 29 x 84
2,351
617 Amp
5*
122.5 x 29 x 84
5,212
N+1 Redundant System 220 VDC Input 220 VAC 50 Hz Single Phase Output
Output VA @ 1.0 PF 20,000 VA N+1 50,000 VA N+1 110,000 VA N+1
AC Power Plant + Controller Model #
Inverter Modules Required
HPRi 25K-220-A
3 x 10 KVA
HPRi 50K-220-A+RA HPRi 110K-220-A+4RA
6 x 10 KVA 12 x 10 KVA
AC Output Current 91 Amp
140 Amp
228 Amp
280 Amp
500 Amp
617 Amp DC Input Current @ 196 V
AC Power Plant Racks 1
24.5 x 29 x 84
2*
49 x 29 x 84
5*
122.5 x 29 x 84 Overall Dim. W”xD”xH”
Total Weight ( Net ) Lbs 1,413 2,691 5,552
* AC Power Plant racks shipped as individual units
Ordering Information:
First determine your power requirement, then select the appropriate AC Power Plant + Controller and quantity of
Inverter Modules from the above tables
For example:
40,000VA output requires
Qty 1
Qty 4
HPRi 50K-220-A+RA
HPRi-INV-10K-220-A
For more information please contact:
Canada & Internatioal USA
Philtek Electronics Ltd.
Philtek Power Corp.
Tel: (604) 270-4642 Tel: (360) 332-7252
Fax: (604) 270-8343 Fax: (360) 332-7253 www.philtek.com
(Printed in Canada 0701)
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project