CMS User`s manual
Intuitive CMS
CMS
(Central Monitoring Station)
User`s Manual
This document contains preliminary information and is subject to change without notice.
49
6. PROGRAM INSTALLATIONS
6.1 System Recommendations
 Power on DVR and the following live video will appear, while viewing and recording at the same time.
- Processor: Intel Pentium(R) (at 2.8GHz or higher)
- Memory: 1.00GB or more
- Video: 128 MB AGP VGA card, 1024 x 768 Resolution, 32-bit Color, DirectX® 8.1 version or later
- HDD Space: 500 MB of space
- Monitor: SVGA or XGA, 1024 x 768 Resolution, 32-bit Color
- OS: Windows® 2000 (SP4) or Windows XP only
6.2 Program Installation Method
 Please follow the program installation procedures below.
① If an old version of CMS program was installed, completely remove or delete the old version.
CAUTION
YOU SHOULD COMPLETELY REMOVE CMS PROGRAM OF AN OLD VERSION BEFORE INSTALLING NEW VERSION TO REDUCE
COLLISION.
② Insert CD in DVD-RW.
③ Run the CMSSetup.exe file.
④ When the following screen appears, click Next.
⑤ When the following screen appears, select folder and click Next.
50
⑥ When the following screen appears, select folder and click Next.
⑦ When the following screen appears, click Install.
⑧ When the following screen appears, click Finish to complete the installation.
6.3 Login
 After install CMS software, CMS icon below appears on desktop.

Please double click on the icon to execute the program.
51
7. FUNCTION AND INSTRUCTIONS
 Below lists are functions of the program.
ICON
ICON NAME
WATCH MODE
SEARCH MODE
REMARKS
System Log
DVR System Log
PTZ Control
DVR PTZ Control
System Health Check
DVR System Health Check
REMOTE WATCH
DVR Data Playback
DVR Data Playback
CMS(PC) Data Playback
CMS(PC) Data Playback
DVR Event Record Data
DVR Event Record Data
Changed to Watch Mode
REMOTE SEARCH
Changed to Search Mode
LOCAL SETTING
Local Setting
CMS Setting
REMOTE SETTING
Remote Setting
DVR Setting
ARCHIVE
Archive(Moving Image)
Playback Image Archive
E MAP
View E map image
DVR(Name)
DVR Activation
DVR Select
REMOTE CONNECT
DVR Connection
Network Connection
REMOTE DISCONNECT
DVR Disconnection
Network Disconnection
Exit CMS
DVR Disconnection
Network Disconnection
INSTANT RECORD
Instant Record
Watch Screen Recording
IMAGE PRINT
Print
Playback Image Print
IMAGE SAVE
Save(Still Image)
Playback Image Save
Full Screen
Quad Screen
9-Split Screen
16-Split Screen
36-Split Screen
64-Split Screen
Zoom Mode
(Setup screen disappears and the image is zoomed)
(Cancel: click the right mouse button)
52
8. WATCH MODE
8.1 LOGIN Screen
 When user login CMS, the following screen will appear. This screen is of Watch mode.
 Because it is not connected to DVR, images do not show.
 Please do Local Setting first before connecting to DVR.
8.2 Local Setting
Please click LOCAL SETTING button of Toolbar and the following screen will appear.

 This menu is for CMS (PC) and Network setup.
8.2.1
System Setup
 This menu is for CMS (PC) setup.
 CMS VERSION: displays current version of CMS.
 Time Format: displays current time and allow user to set date and time.
 Display Option:
- Default Division: default displays division.
- Display Mode: (Default: YUV2 Mode (Default)).
- FULL E Map Display: full E Map displays
- FULL Screen Display: display in Full Screen depending on to the resolution of PC.
 Security Option: Set up user’s ID, Password and attribution for login CMS.
- Click Account and will display following.
- Manager/User: allow user to authority.
53
 Save Option: allow user to select Drive(C, D) and folder to save data.
 Choose ‘OK’ to confirm the setting.
8.2.2
Remote Site
 This menu is for Network setup.
 Make CMS IP address and Port coincide with DVR.
 Remote Site Connection Setup
- Site Name: input DVR site name to be displayed on the right-hand side of DVR icon. Please note that this name has
nothing to do with the ID registered in DVR. User may create a name that is fairly easy to distinguish.
- IP Address/Domain Name: input IP address or Domain Name of DVR (check with SETUP>DEVICES>Network in DVR).
- Command Port: input Administrator’s number among port numbers set in DVR (check with SETUP>DEVICES>Network in
DVR).
- Stream Port: INPUT Video/Audio number among port numbers set in DVR (check with SETUP>DEVICES>Network in
DVR).
- Re-connect when abnormal disconnected: When the CMS has abnormally disconnected, it automatically verifies the
network condition, then tries reconnecting to designated site.
 Scan DVR
- This function automatically detects and registers units currently connected to local networks.
- Click “Scan DVR”, then following will pop up.
54
- Click “Scan DVR” button then IP address of DVR will be listed which is currently connected with PC in the network.
- Select the IP address and click “Add site” then the connected DVR is automatically registered in the CMS.
 Camera Name
- It helps to set the camera name in CMS program other than DVR camera name.
- Click “Camera Name” then follow will appear.
- Select one site by clicking “Current Site”.
- Choose camera name between DVR and CMS setting or both.
By DVR setting : Display camera name of DVR.
By CMS setting : Display Camera name of CMS.
Both : Display both as [DVR name]-[CMS name].
- Type the name of each cameras in “Camera Name” item. It is not available when select displaying DVR name only.
- It is possible to erase all names by clicking “Clear all names”.
- Click “Save” to save the setting.
- Save and close the setting panel by clicking “OK”.
- Exit without saving by clicking “Cancel”.
 Remote Site Login Setup: Input ID and Password.
- Please do not input ID and Password if wish a popup window for logon ID and password to appear at the time of
connection to CMS.
- Please input ID and Password if wish to connect directly to CMS without ID and password verification.
- ID and Password should be coincident with those of DVR. If Password for DVR has not been set up, enter ID only (check
with DVR: SETUP>SYSTEM>Account>User in DVR).
- Transfer Camera Select enables user to set the kind of channel(s) that show during the initial connection.
 Add Site: Click this button to add DVR site. User may be able to register up to 256 DVR site.
 Delete Site: use this button to delete the already registered DVR site(s).
 E-map Setup: Use this to upload saved E-map image file (see 10.2 E-map).
 Popup Display: Setup for beep and popup displays when event input.
 Beep: Beep when event occur.
 Covert On: Tick the box off, then it shows the covert screen.
 Please choose ‘OK’ to confirm the setting.
55
8.3 Live Video
8.3.1
Network Connection
 As the setup is completed, user should connect CMS to DVR over Network.

Please click in REMOTE DVR on the screen.

It will turn to blue, while being activated.

Please click REMOTE CONNECT button.
 If a popup window for ID/Password appears, please input ID/Password. The window may not show up at all depending on
Remote Site Login Setup.
(NOTE)
If there is no Admin Password set up in DVR, user may log-in to Admin for CMS and enter without Password.
(NOTE)
Before network connection, be sure that HDD is installed. Otherwise, the DVR will not be connected over network.
 If video does not display, please check Local Setting again.
 Site Tree of DVR will show with the video. Site Tree lists DVR sites being currently connected to the CMS.
 This is Live video of the connected DVR.
 User can connect maximum 16 sites simultaneously.
 If user clicks Remote Disconnect, interface with a site is disconnected.

To connect another DVR, please press REMOTE DISCONNECT button to disconnect the current DVR and
connect the new DVR.

If wish to exit CMS program, click on Exit CMS button.
③
②
①
⑪
⑤
⑥
④
⑨
⑫
⑧
⑩
 The list below describes functions of each part of the screen.
56
⑦
8.3.2
1
Tool Bar
2
Watch Mode
3
Date/Time LED
4
Site Tree (DVR and Channels)
5
Color Control Bar
6
Instant Record Button
7
System Log
8
Alarm Out Channels
9
Audio Channels
10
Two way Audio
11
Video Display Screen
12
Network Connect/Disconnect Button/Exit CMS
Watch Mode
 The first image (or the initial image) shows the available maximum split screen format, but user is able to select a watch
mode among below modes.

Full Screen Mode: Select a channel and click on FULL SCREEN button. Then, the corresponding channel will
display in Full Screen.
(NOTE)
A selected channel is outlined in red.

Quad Screen Mode: Click on QUAD SPLIT button and a quad screen will display. The quad screen is in
combination of 1~4, 5~8, 9~12 and 13~16. If user selects Channel No. 7 and click the button, 5~8 quad screen will display.
Similarly, if user selects Channel No. 16, 13~16 quad screen will display.

9-Split Screen Mode: Click on 9-SPLIT button and 9-split screen will display. The 9-split screen is in combination of
1~9 and 8~16. If user selects Channel No. 9 and click the button, 1~9 split screens will display. Similarly, if user selects
Channel No. 10, 8~16 split screens will display.

16-Split Screen Mode: Click on 16-SPLIT button and 16-split screens will display.

36-Split Screen Mode: Click on 36-SPLIT button and 36-split screens will display.

64-Split Screen Mode: Click on 64-SPLIT button and 64-split screens will display.

Zoom Mode: Click on Zoom button. Then, the setup screen will disappear and only the video image will be zoomed
57
(scaled to fit the screen). To cancel, please press the right mouse button.

E Map: load and close E Map image program.
 Mouse Double Click: If user does double click of the mouse on a split screen, it will turn to full screen mode. Double click
the mouse to back to the previous watch mode.
8.3.3
Multi Screen
 CMS supports multi remote site connections simultaneously.
 Server Drag & Drop: Drag & Drop Remote Site of site tree to any screen. Then all cameras of the site will display
sequentially.
 Camera Drag & Drop: Drag & Drop a camera of Remote Site to any screen. Then the camera will display.
8.3.4
Screen Color Adjustment
 Adjust color of the screen using three bars (Brightness / Contrast / Saturation). Selecting a channel and dragging the bar(s)
with a connected mouse. Color will change in about 7 seconds.

Click on UNDO button to return to the original colors.
Brightness
Contrast
Saturation
Undo
8.3.5
Audio
 Click an audio channel to listen to the corresponding channel.
 User may adjust the audio volume with a mouse.
 Click a MIC Icon to use to two way audio.
8.3.6

System Log
Click on LOG button on Watch screen. This will allow user to check System Log of Remote Site (DVR).
58
8.3.7
Alarm Out
 This is for operating Alarm Out of a selected DVR from a remote distance.
 Click a channel number and Alarm Out of the corresponding channel will operate.
 If user sees an intruder, use this function to turn on a siren in an area where the DVR is installed.
8.3.8
One touch Recording
Click on INSTANT RECORD button to save video of every channel in HDD of Local System (PC with CMS

installation).
8.4 PTZ Control
 This is for the control of Pan/Tilt of DVR.

Click on PTZ button in Watch mode and the following screen will appear.
③
①
②
 Buttons on the screen have the following functions.
① Up/Down/Left/Right direction buttons
② Up/Down/Left/Right direction buttons
Zoom Out/ In
Preset Control / Go to Preset
Focus Near / Far
Iris Close / Open
59
③ Preset Control button
The completed Preset
 Click on Preset Control button and the following screen will appear. Please input Title and Preset Number.
 When user completes the inputting, please choose ‘OK’ to confirm.
 Press LOG button to go back to Live video.
8.5 Health Check
 This function allows user to check operating status of each unit in DVR connected to CMS.

Click on Health Check button in Watch mode and the following screen will appear.
⑨
⑧
①
②
③
④
⑤
⑥
⑦
 The list below describes functions of each part of the screen.
1
CMS connections (up to 4)
2
Camera connections and operating status
3
HDD connection and its operating status
4
Recording status
5
Motion recording status
6
Alarm In connection and operating status
7
Alarm Out connection and operating status
8
Version
9
Recording start/end date and time
60
8.5.1
Camera connections and Operating Status

Camera is in normal operation.

Camera is not in use.

Camera is not connected or Video Loss.

Camera is Covert status.
8.5.2
HDD connections and Operating Status

Camera is in normal operation.

HDD is not connected (up to 4).

HDD has an error.
8.5.3
Recording Status

Camera is in normal operation.

Recording is stopped.

Above the maximum number of cameras allowed.
8.5.4
Motion Recording Status

Camera is in normal operation.

Recording is stopped.

Above the maximum number of cameras allowed.
8.5.5
Alarm In Connection and Operating Status

Camera is in normal operation.

Recording is stopped.

Above the maximum number of cameras allowed.
8.5.6
Alarm Out Connection and Operating Status

Camera is in normal operation.

Recording is stopped.

Above the maximum number of cameras allowed.
61
8.6 Remote Setting
 User may change DVR’s Menu setup through CMS.
 Remote Setting works only in Watch mode.

Click on REMOTE SETTING button in Watch mode and the following SETUP menu same as DVR’s will appear on
CMS screen.
 The setup procedure is same as that of DVR.
 When the setup is completed, do not click Exit button on the SETUP screen, but click OK or Cancel button on the Remote
Setup screen.
62
9. SEARCH MODE
9.1 Search Screen
 This menu is for playing back recorded data.

Click on REMOTE SEARCH button in Watch mode and the following Screen mode screen will appear.
 Search mode provides three search functions. One is for searching DVR video by clicking REMOTE SEARCH button and
another is for searching video stored in CMS (HDD of PC) by clicking LOCAL SEARCH button and the other is for searching
event recorded data stored in DVR by clicking REMOTE EVENT button.
③
②
①
⑥/⑦
④
⑤
⑪
⑧
⑩
⑨
 The list below describes functions of each part of the screen.
1
Tool Bar
2
Watch Mode
3
Date/Time LED
4
Site Tree (DVR and Channels)
5
Calendar
6
IMAGE PRINT button
7
IMAGE SAVE button
8
Playback control button
9
Time Select Bar
Fast Forward/Backward & Playback
(Click to increase the speed by x1, x2, x4, x8,
x16, x32, x64 and Extreme)
10
11
Network Connect/Disconnect button
12
Audio Channel (Display selected Audio channel)
9.2 Remote Search

The REMOTE SEARCH button allows user to playback recorded video of DVR.
 Select Date
- In Calendar, dates with recorded data are marked in red.
- Click the wanted date among the dates marked in red. In background of Time Select Bar, data recorded time is displayed
in bar shape.
63
 Select Time
- Click the time want to playback, then Time Select Bar will move. User may drag the Time Select Bar with mouse.
Search previous ‘Year’
Search subsequent ‘Year’
Search previous ‘Month’
Search subsequent ‘Month’
①
⑥
④
③
⑤
1
Fast Forward/Backward & Playback
(Click to increase the speed by x1, x2, x4, x8,
x16, x32, x64 and Extreme)
2
Select Camera to be played back
3
Time LED (24 Hour)
4
Data Bar (Recorded data)
5
Time Select Bar
6
Start Time (Time for starting playback)
②
 When Date/Time search is completed, please click Playback control button to begin playback.
9.3 Local Search

The LOCAL SEARCH button allows user to playback recorded data in CMS (HDD of PC).
 Date/Time search procedures are same as Time Search.
 When Date/Time search is completed, please click Playback control button to begin playback.
64
9.4 Event Search
The REMOTE SEARCH button allows user to search event recorded data of DVR.

① Designate Event Search start time.
② Designate Event Search end time.
③ Select camera (video) to search data.
④ Check a check box (Motion/Alarm In/Emergency/Serial in) Check box.
⑤ Click on Search Index button to recorded search event data.
9.5 Playback
9.5.1
Playback Control Button
 Select time and click Fast Forward/Backward button.
 Click  button to begin playback.
 Use the control buttons below while playback.

I
I
I
I
Fast Backward Play
Fast Forward Play
Play
Stop
Go to the First Image
Go to the Last Image
Go to the Previous Image
Go to the Next Image
CAUTION
Make sure that use control buttons after STOP button. For example, if you want to change from Play mode to Fast Forward Play mode, press
STOP button first, select the speed and then Fast Forward Play button. This applies equally when you use other buttons.
65
9.5.2
Print
 This is for printing a selected image (within the red outline).

Click IMAGE PRINT button and the following screen will appear.
 Choose ‘OK’ to confirm the setting. Then, the printing proceeds.
9.5.3
Save
 This is for saving still image(s) in Bitmap or JPEG file.

Click IMAGE SAVE button and the following screen will appear.
 Input the name of the file to save and execute Save.
CAUTION
If images are not saved properly, click UNDO button and save again.
66
9.5.4
Archive
 This is to back up the DVR’s moving image data to EXE file in PC(CMS).
 Work only in playback mode.


Press STOP button first to make sure the playback is stopped and then press ARCHIEVE button.
Click ARCHIVE button and the following screen will appear.
① Designate Archive start time.
② Designate Archive end time.
③ Designate file name.
④ Select camera (video) to save.
⑤ Click on Start button to begin Archive.
67
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement