DVR-5HD - Snooper Services
 DVR-5HD
Dual Channel
Vehicle Drive Recorder
User manual
Contents
About this Guide��������������������������������������������������������������������������������4
Guide................................................................................4
FCC Statement ���������������������������������������������������������������������������������4
.................................................................................4
WEEE Notice ������������������������������������������������������������������������������������5
....................................................................................5
CE Regulatory Notice �����������������������������������������������������������������������5
.......................................................................5
Battery Warning ��������������������������������������������������������������������������������5
................................................................................5
Notes on Installation �������������������������������������������������������������������������6
.........................................................................6
Caution ���������������������������������������������������������������������������������������������7
.............................................................................................7
.
1
Introduction 8
1Introduction.............................................................................8
1.1
Features8
1.1Features..............................................................................8
1.2
Package Contents8
1.2
Package
Contents...............................................................8
1.3
Product Overview
9
1.3
Product
Overview................................................................9
1.3.1
Main Body Graphic
9
1.3.1
Main
Body Graphic............................................................9
1.3.2
Rear Camera
Graphic
10
1.3.2
Rear
Camera
Graphic
2
Getting
Started
11 .......................................................10
2.1
Storage Media
11
2
Getting
Started......................................................................11
2.1.1
Insert
the
Memory Card
11
2.1.2
RemoveMedia...................................................................11
the Memory Card 11
2.1
Storage
2.2
Installing
Vehicles
12
2.1.1
Insert
the in
Memory
Card...................................................11
2.2.1
Mount the
Device
to Windshield
12
2.1.2
Remove
the
Memory
Card...............................................11
2.2.2
Adjust theinDevice
13
2.2
Installing
Vehicles..........................................................12
2.2.2.1 Mount
Dismount
Device
14
2.2.1
thethe
Device
to Windshield.......................................12
2.2.2.2 Adjust
Dismount
Bracket
14
2.2.2
the the
Device..............................................................13
2.2.3
Mount Rear
to the Windshield
15
2.2.2.1
Dismount
theCamera
Device.........................................................14
2.2.4
Adjust Rear
16
2.2.2.2
Dismount
theCamera
Bracket.......................................................14
2.2.4.1 Mount
RecordRear
Rearview
16to the Windshield............................15
2.2.3
Camera
2.2.4.2 Adjust
RecordRear
inside
the Vehicle 17
2.2.4
Camera..........................................................16
2.3
Connecting
to Power and Rear Camera
18
2.2.4.1
Record
Rearview...............................................................16
2.3.1
Connecting
tothe
Power
18
2.2.4.2
Record
inside
Vehicle..................................................17
2.3.2
Rear Camera19
2.3
Connecting to Power
and Rear Camera..........................18
2.4
LED Indicator
21
2.3.1
Connecting
to Power.........................................................18
2.5
Powering thetoDevice
On / Off
22
2.3.2
Connecting
Rear Camera.............................................
19
2.4
LED Indicator.....................................................................21
1
DVR-5HD V1.0 04/17
2.5.2
2.5.1
Auto Power
Manual
Power
On/Off
On/Off and Reset......................................22
22
2.5.2
2.5.2.1
Manual Power On.............................................................22
On/Off and Reset
22
2.5.2.1 Manual Power Off
2.5.2.2
On.............................................................22
22
2.5.2.2 Reset
2.5.2.3
Manualthe
Power
Device
Off.............................................................22
22
2.5.2.3 Initial
2.6
ResetSettings....................................................................23
the Device 22
2.6
2.6.1
Initial
Set
Time
Settings
zone...................................................................
23
23
2.6.1
2.6.2
Set the
Time
Date
zone
/ Time..........................................................25
23
2.6.2
Set the Date / Time
25
3
3
Using the
the Drive
DriveRecorder......................................................26
Recorder 26
3.1
Automatic
Record 26
3.1
Automatic Record.............................................................26
3.1.1Resolution
26
3.1.1Resolution.........................................................................26
3.1.2
The
Recording
Screen
27
3.1.2
The Recording Screen......................................................
27
3.1.3
Emergency
Recording
29
3.1.3
Emergency Recording.......................................................29
3.2
Add
Speed
Point 30
3.3
Picture
in Video.................................................................30
3.3
Picture
in Video 30
3.4
Driving Safety.....................................................................31
3.4
Driving
Safety
31
3.4.1
Speed Limit
Alert..............................................................32
3.4.1
Speed
Limit
Alert
32
3.4.2
Parking Mode...................................................................33
3.4.2
Parking
Mode
33
3.4.3
Collision Detection............................................................35
3.4.3
Collision
Detection
35
3.4.4
Driver Fatigue
Alert............................................................36
3.4.4
Driver
Fatigue
Alert
36
3.4.5
Headlight Warning............................................................37
3.4.5
Headlight
Warning37
3.4.6LDWS ...............................................................................38
3.4.6
LDWS38
3.4.7FCWS
...............................................................................40
3.4.7
FCWS40
3.4.8FCWS
...............................................................................41
3.4.8
FCMD41
3.5
File Playback....................................................................42
3.5
File
Playback
42
3.5.1
Playing
Videos...................................................................43
3.5.1
Playing
Videos
43
3.5.2
Viewing Pictures................................................................44
3.5.2
Viewing
44
3.5.3
PlaybackPictures
Screen..............................................................45
3.5.3
Playback
Screen
45
3.6
Deleting Files.....................................................................47
3.6
Deleting Files
47
4
Adjusting
the
Settings
49
4
Adjusting the Settings......................................................
....49
4.1
Using the Menu 49
4.1
Using
the
Menu................................................................49
4.2
Menu Items
50
4.2
Menu
Items.......................................................................
50
5
Connecting
to Other Devices
55
5.1
Connecting to the Computer
55
2
DVR-5HD V1.0 04/17
5.2
5
Connecting to Other
TV..............................................................56
Devices...............................................54
6
Installing the Software.......................................................57
7
5.1
Snooper DVR....................................................................58
Connecting
to the Computer............................................54
8Specifications....................................................................59
5.2
Connecting to TV..............................................................55
6
Installing the Software......................................................56
7
Snooper Player..................................................................57
8Specifications...................................................................58
9
Service Under Warranty........................................................61
3
DVR-5HD V1.0 04/17
About this Guide
The content in this document is for information purpose and is
subject to change without prior notice. We have made every effort
to ensure that this User Guide is accurate and complete. However,
no liability is assumed for any errors or omissions that may have
occurred. The manufacturer reserves the right to change the
technical specifications without prior notice.
FCC Statement
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
FCC Caution: Any changes or modifications not expressly approved
by the party responsible for compliance could void the user’s
authority to operate this equipment.
4
DVR-5HD V1.0 04/17
WEEE Notice
Disposal of Waste Electrical and Electronic Equipment and/
or Battery by users in private households in the European
Union
This symbol on the product or on the packaging indicates that this
cannot be disposed of as a household waste. You must
dispose of your waste equipment and/or battery by handling
it over to the applicable take-back scheme for the recycling
of electrical and electronic equipment and/or battery. For
WEEE
more information about recycling of this equipment and/or
battery, please contact your city office, the shop where you
purchased the equipment or your household waste disposal
service. The recycling of materials will help to conserve
Battery natural resources and ensure that it is recycled in a manner
that protects human health and environment.
CE Regulatory Notice
The product herewith complies with the requirements of the Low
Voltage Directive 2014/35/EU, the EMC Directive 2014/30/EU,
battery directive 2006/66/EC, the R&TTE Directive 1999/5/EC and
the RoHS Directive 2011/65/EC.
Battery Warning
•
•
•
•
•
•
•
Never dismantle, crush, or pierce the battery, Do not expose
battery to a high temperature environment.
Only replace the battery with a genuine Snooper battery.
Keep the battery out of reach of children.
Batteries may explode if exposed to naked fire. Never dispose
of batteries in a fire.
There are no user serviceable parts inside the DVR-5,the battery
can only be replaced by an authorised Snooper technical.
Disposed of used batteries observing local regulations.
5
DVR-5HD V1.0 04/17
Notes on Installation
1.
2.
3.
4.
5.
6.
7.
8.
Please measure the front windshield viewing area, do not
restrict the drivers view of the road ahead. Install the device
below the rear view mirror (the centre of the front windshield).
We recommend that the sky and the land occupied by the
screen 50%, fix the car bracket and then adjust the device so
that the lane is aligned with the screen. The correct installation
enables the device to maximize the accuracy of LDWS.
Rear camera should be installed at the central, higher right
position of the front windshield to have the best viewing. After
installation, make sure the lens must be positioned at the front
direction, the lens in the wrong direction will cause the video
screen upside down.
Make sure that the lens is within the wiping zone of the
windscreen wiper to ensure a clear view even when it rains*
Do not touch the lens with your fingers. Finger grease residue
may be left on the lens and will result in unclear videos or
pictures. Clean the lens on a regular basis.
Do not install the device on a tinted film window. Doing so may
damage the tint film.
Do not restrict the drivers view of the road ahead.
This product is suitable for light windshield or light colour heatresistant film windows, the video quality will be reduced if the
camera(s) are installed on dark tinted windows.
Use the products supplied, failure to use the correct power
cable will invalidate your warranty.
* Do not mount the dash cam in Zone A as this may contravene local
traffic laws.
RHD
LHD
6
DVR-5HD V1.0 04/17
Caution
•
•
•
•
•
•
•
•
Is is not safe for the driver to operate this device while the
vehicle is in motion.
Adjust the time zone before you use this device.
The results of GPS positioning are only for reference, and should
not affect the actual driving situation.
GPS positioning accuracy may differ depending on weather
and geographical restrictions such as high buildings, tunnels,
underpasses, or forests. GPS satellite signals cannot pass
through solid materials (except glass). Solar reflective glass will
also affect the performance of the GPS satellite reception.
GPS reception performance on each device may differ.
The values displayed in this device, such as speed and position,
are for guidance only due to the influence of surrounding
environment.
This device gets warm when in use; this is normal.
Improper use or operation of the product may result in damage
of the product or its accessories and this will void the warranty.
Before you start using the product, it is assumed that you
agree to the above statement.
7
DVR-5HD V1.0 04/17
1 Introduction
Thank you for purchasing this advanced drive recorder. This product
is specifically designed for real time video recording when driving.
1.1 Features
•
•
•
•
•
•
•
2K HD recording videos ([email protected])
3.0” TFT-LCD colour screen
Wide-angle dual camera
Collision Detection, when a collision is detected, the device will
automatically trigger the emergency recording
Parking Mode, the system will automatically power on and start
recording when the device senses the vibration
Multifunction traffic safety reminder
Support SDHC class 10 and micro SD memory storage 16GB or
above (supports up to 32GB)
1.2 Package Contents
The package contains the following items. If any items are missing or
damaged contact your dealer immediately.
Drive Recorder
Rear Camera
Bracket
Automotive
Double-sided
Adhesive
CD-ROM
Micro SD card
Car Adapter
Micro USB cable
for rear camera
8
DVR-5HD V1.0 04/17
1.3 Product Overview
1.3.1 Main Body Graphic
Front View
1
2
Side (Left and Right) Views
3
4
5
6
7
10
11
12
Rear View
8
Top View
15
13
14
16
Bottom View
9
Item
No.
LED Indicator
2
LCD Colour Screen
3
Menu / Back Button (
)
4
Playback button /up
button (
)
Item
No.
Item
1
/
5
Snapshot / Down Button (
/
)
6
Emergency Recording /
Confirm Button (
/
7
Switch Camera Button (
8
Speaker
)
)
9
Wide Angle Lens
10
Memory Card Slot
11
Microphone
12
Power Switch
13
Power Connector Port
14
HDMI Connector Port
15
Micro USB Connector Port
16
Bracket Socket
Note:
Please press the button (3~7) according to the diagram notice shown on screen.
9
9
DVR-5HD V1.0 04/17
1.3.2 Rear Camera Graphic
Front View
Top View
Side (Left and Right)
Views
1
4
2
Rear View
No.
5
3
Item
Bottom View
No.
Item
1
Wide Angle Lens
4
Camera Rotation Shaft
2
Base
5
Base Rotation Shaft
3
Micro USB Connector Port
10
10
DVR-5HD V1.0 04/17
2 Getting Started
2 Getting Started
2.1 Storage Media
2.1 Storage Media
2.1.1
Insert
the Memory
Card
2.1.1
Insert
the Memory
Card
Insert memory card with the contacts facing forward see the picture
Insert memory card with the pins facing forward see the picture as
as below:
below:
Carefully Insert the memory card into the device
until the lock can be smoothly slid. The card will
protrude in normal use, damage may occur if
pressed too hard.
2.1.2
Remove
the the
Memory
CardCard
2.1.2
Remove
Memory
If the device is powered on, please power off first and wait for the
If the device is power on, please power off first and wait for
device
to switch
off completely
before
removing
the the
memory
card.
the device
to switch
off completely
before
removing
memory
Please
refer Manual
Power
On/Off
(2.5.2).
card. Please
refer Manual
Power
On/Off
(2.5.2).
Note:
1.Note:
Do not remove or insert the memory card when the device is
1. Do
not remove
or insert
memorythe
cardmemory
when the card.
device is turned on.
turned
on. This
maythe
damage
This may damage the memory card.
2. Support SDHC class 10 and memory storage 16GB or above
2. Support SDHC class 10 and memory storage 16GB or above (support up
(support
to
32GB). up to 32GB).
3.3. Please
Pleaseformat
format
the SD
micro
cards
before
thesection
initial4.2
use see
the micro
cardsSD
before
the initial
use see
Menu
items,
section
4.2Format.
Menu items, Format.
11
11
DVR-5HD V1.0 04/17
2.2 Installing
2.2 Installing
2.2.1 Mount the Device to Windshield
2.2.1
Deviceinto
to Windshield
1. Mount
Push the
the bracket
bracket slot on top of
device until a click sound is heard.
1.
Push the bracket into bracket slot on top of
2. Connect to the vehicle power supply then
device
untilon
a click
sound preview
is heard.screen and
power
to enter
2. Connect
the field
vehicle
power
supply
confirmto the
of view.
Then
cleanthen
the
surface
thepreview
windshield
with
alcohol
to
power
on to of
enter
screen
and
confirm
the adhesion
surface
clean.
the ensure
field ofthat
view.
Then clean
the issurface
Please refer to Connecting to Power (2.3.1),
of the
windshield with alcohol to ensure
and Powering the Device On / Off (2.5).
that the adhesion surface is clean. Please
3.referRemove
the protective
on the
bottom
of
to Connecting
to layer
Power
(2.3.1),
and
the bracket.
Powering
the Device On / Off (2.5).
3. 4.Remove
the the
protective
layer
on theinstall
bottom
Release
lever of the
bracket,
theof
bracket onto the windshield, then lock the
the bracket.
lever the
to complete
installation.
4. Release
lever ofthe
the
bracket, install the
bracket onto the windshield, then lock the
lever to complete the installation.
5. Make sure the bracket is firmly attached onto
the windshield.
Note:
5.
1.
Make sure the bracket is firmly attached onto the windshield.
Do not install the device on a film tinted window. Doing so may
Note:
damage the tint film.
1. Do not install the device on a film tinted window. Doing so may damage
2. This
product
is suitable for light windshield or light colour heatthe tint
film.
2.resistant
This product
suitable for itlight
or light
colour if
heat-resistant
filmiswindows,
willwindshield
affect video
quality
installed on
filmdark
windows,
it will affect
video
quality if installed
the dark windows
the
windows
or dark
heat-resistant
filmonwindows.
or dark heat-resistant film windows.
3. 3.Remove
theprotective
protective
the bottom
of the bracket.
Remove the
layerlayer
on theon
bottom
of the bracket.
12
12
DVR-5HD V1.0 04/17
2.2.2 Adjust the Device
2.2.2
Adjust the
the knob
Device
1. Loosen
to swivel the
device vertically.
1.Loosen
the knob to swivel the
device vertically.
Knob
2.Loosen the knob to swivel the device
horizontally up to 360°.
2.
Loosen the knob to swivel the device
horizontally up to 360°.
Knob
3. Then tighten the knob to make sure the
device is securely locked in place.
3.
Then tighten the knob to make sure the device is securely
locked in place.
13
13
DVR-5HD V1.0 04/17
2.2.2.1
2.2.2.1 Dismount
Dismountthe
theDevice
Device
2.2.2.1
Dismount the Device
To
remove thethe
device, press
the lever
and slide
the camera
to the left
For
press
For removing
removing the device,
press the
the lever
lever and
and slide
slide the
the camera
camera to
to
to
remove
device device,
as
the picture
shown.
the
left to remove
device
as the picture
shown.
the left to remove device as the picture shown.
2.2.2.2
2.2.2.2 Dismount
Dismountthe
theBracket
Bracket
2.2.2.2
Dismount the Bracket
To dismount the bracket, first release the lever then pull the small tag
To
dismount
bracket,
the
lever
then
to
thethe
vacuum
andfirst
to release
dismount
bracket.
Torelease
dismount
the
bracket,
first
release
thethe
lever
then pull
pull the
the small
small
tag
tag to
to release
release the
the vacuum
vacuum and
and to
to dismount
dismount the
the bracket.
bracket.
14
14
14
DVR-5HD V1.0 04/17
2.2.3
Mount
RearCamera
Camera
tothe
theWindshield
Windshield
2.2.3 2.2.3
M
ountMount
Rear
Camera
to the Windshield
Rear
to
1. the
Remove
the
white backing
paper
on the double
1. Remove
whitethe
backing
onpaper
the
double
sticker, attach
1. Remove
white paper
backing
on theside
double
side sticker, stick it onto the base of rear
side
sticker,
stick
it
onto
the
base
of
rear
it onto thecamera,
base of rear
then press
then camera,
press doubled
side tape
press firmly
doubled
side tape
doubledcamera,
side
tapethen
to ensure
stick.
to ensure
firmly
stick.
to ensure firmly stick.
2. Adjust rear camera as the picture shown:
please check base text is in the right
direction to ensure the recording screen
direction is in right direction before
installation.
2. Adjust rear camera as the picture
2. Adjust rear camera as the picture
shown:
please check
base text
is in
3. Connectshown:
the supplied
5m base
micro
please check
textUSB
is in
right direction to ensure the
to cameras,
ensure then
the
cable toright
the direction
front and rear
recording screen direction is in right direction before
is in right direction before
connectrecording
the front screen
camera direction
to the power
installation.
installation.
supply then power on the front camera, enter preview screen and
3. Connect the supplied 5m micro USB cable to the front and
confirm
the field the
of view.
Then5m
clean
theUSB
surface
of to
thethe
windshield
3. Connect
supplied
micro
cable
front and
rear cameras, then connect the front camera to the power
rear cameras,
then
connect
the front
camera
to the Please
power
with alcohol
to
ensure
that
the
adhesion
surface
is
clean.
supply then power on the front camera, enter preview screen
supply then to
power
on the Rear
front camera,
enter
preview
screen
refer to Connecting
Power
Camera
(2.3),
Powering
and confirm the
field and
of view. Then
clean
theand
surface
of the
and confirm the field of view. Then clean the surface of the
windshield
with
alcohol
to
ensure
that
the
adhesion
the Device
On
/
Off
(2.5).
windshield with alcohol to ensure that the adhesion
surface is clean. Please refer to Connecting to Power
surface is clean. Please refer to Connecting to Power
and Rear Camera (2.3), and
4. Removeand
the red
on the(2.3),
double
Rearpaper
Camera
andside
Powering the Device On / Off (2.5).
sticker. Powering the Device On / Off (2.5).
4. Remove the red paper on the double side
4. Remove the red paper on the double side
sticker.
5. Install rear
camera onto the windshield,
sticker.
press the bracket to ensure it is firmly
attached.
5. Install rear camera onto the
5. Install rear camera onto the
windshield, press the bracket to
windshield, press the bracket to
ensure it is firmly attached.
ensure it is firmly attached.
15
15
15
DVR-5HD V1.0 04/17
Note:
1. Do not install the device on a film tinted window. Doing so may
damage the tint film.
2.
This product is suitable for light windshield or light colour heatNote:
1. Do
not install
thewindows,
device on aittinted
Doing so
may damage
the on a
resistant
film
will window.
affect video
quality
if installed
tint film.
darkproduct
window
or darkforheat-resistant
windows.
2. This
is suitable
light windshield film
or light
colour heat-resistant
windows,
will affect video
quality
if install
it on of
thethe
dark
windows or
3. film
Remove
theit protective
layer
on the
bottom
bracket.
dark heat-resistant film windows.
3. Remove the protective layer on the bottom of the bracket.
2.2.4 Adjust Rear Camera
2.2.4 Adjust
Camera
2.2.4.1
Record Rear
Rearview
(interior)
2.2.4.1
Record Rearview (exterior)
1. Adjust rear camera as shown in the image below. If the camera
1.is Adjust
camera
shownofinthe
the vehicle,
image below.
If the camera
is
set torear
record
the as
interior
to record
the exterior
set to record the interior of the vehicle, to record the exterior of
of the vehicle turn the rotation shaft 180° and then rotate rear
the vehicle turn the rotation shaft 180° and then rotate rear
camera
180°. Point the lens toward the rear of the car. Note that
camera 180°. Point the lens toward the rear of the car. Note that
the
mark
be ininthe
theupper
upper
position
to ensure
the correct
the markshould
should be
position
to ensure
the correct
camera
cameraorientation.
orientation.
2.
16
Adjust the rear camera angle by using the preview screen.
16
DVR-5HD V1.0 04/17
2.2.4.2 Record inside the Vehicle
2.2.4.2
Record inside the Vehicle
Adjust
camera
as the
picture
shown.
thecamera
cameraisisready
ready to
1. 1.
Adjust
rear rear
camera
as the
picture
shown.
If Ifthe
to record
the exterior
of the vehicle,
turn
the rotation
record
the exterior
of the vehicle,
turn the
rotation
shaft shaft
180 °,180
and
°, and then rotate rear camera 180°, point the lens toward
then inside
rotateofrear
camera
180°,
point
the
lens
toward
inside
of
the
the car. Note that the mark shall be in the upper
car. Note
thattothe
mark shall
be in the
upper
position to ensure the
position
ensure
the correct
camera
orientation.
correct camera orientation.
2.
Users can adjust rear camera angle by using the preview
screen.
Note: When viewed through the DVR-5HD screen the image from the rear
camera
is mirrored.
Note:
When
viewed through the DVR-5HD screen the image from
When the image from the rear camera is viewed via a PC the image is true.
the rear camera is mirrored. When the image from the rear camera is
viewed
Note: via a PC the image is true.
We recommend users to disconnect micro USB from rear camera before
adjusting.
Note:
We recommend users to disconnect micro USB from rear
camera before adjusting.
17
17
DVR-5HD V1.0 04/17
2.3
Connecting
toPower
Power
andRear
Rear
2.3
Connecting
to Powerto
and
Rear Camera
2.3
Connecting
and
Camera
Camera
2.3.1 Connecting to Power
2.3.1
Connecting
Power
2.3.1
totoPower
Use
only Connecting
the
supplied power
connector for this device and charging
Use
onlythe
thesupplied
suppliedpower
powerconnector
connectorforforthis
thisdevice
deviceand
andcharging
charging
Use
only
the
built-in
battery.
built-in
battery.
built-in
battery.
1.the
Cthe
onnect
one
end of power connector to power connector port on
1. Connect
Connectone
oneend
end ofpower
powerconnector
connectortotopower
powerconnector
connectorport
portonon
1.the
device. USB
portofinput:
DC 5V / 1.0A.
thedevice.
device.USB
USBport
portinput:
input:DC
DC5V
5V/ 1.0A.
/ 1.0A.
the
Plug
theother
otherof
end
ofthe
the
caradapter
adapter
tothe
thecigarette
cigarette
lighter
the
end
car
2.2.P2.lugPlug
the
other
end
theofcar
adapter
to the to
cigarette
lighter lighter
socket
socket
your
vehicle.
Once
the
cablehas
has
power,
thedevice
device
socket
ofofyour
vehicle.
Once
the
cable
power,
the
of your
vehicle.
Once
the cable
has
power,
the
device
automatically
automaticallyturns
turnson.
on.Car
Carcharger
chargerinput:
input:DC
DC1212/ 24V.
/ 24V.
automatically
turns
on. Car charger input:
DC 12 / 24V.
Note:
Note:
Please
nottodo
toblock
block
thedriver's
driver's
field
of
view,
install
the
device
under
thethe
Please
dodonot
field
ofdriver’s
view,
install
the
device
under
the
Note:
Please
notthe
to
block
the
field
of
view,
install
driving
mirror
(upper
central
the
front
windshield).
And
recommend
that
driving
mirror
(upper
central
ofof
the
front
windshield).
And
wewe
recommend
that
device
under
the
driving
mirror
(upper
central
ofscreen,
the
front
windshield).
the
sky
and
the
land
occupied
50%
the
recording
screen,
please
adjust
the
sky
and
the
land
occupied
byby
50%
in inthe
recording
please
adjust
the
drive
recordersosothat
that
the
alignment
icon
aligning
thedriving
driving
lane. in
And
we
recommend
that
the
sky and
the
land
occupied
bylane.
50%
the
drive
recorder
the
alignment
icon
is isaligning
the
Properinstallation
installationenables
enablesthe
thedevice
devicetoto
maximize
the
efficiency
and
Proper
maximize
the
efficiency
and
the
recording
screen,
please
adjust
the
drive
recorder
so
that
the
improve
the
accuracy
LDWS.
improve
the
accuracy
ofof
LDWS.
alignment icon is aligning the driving lane. Proper installation enables
1818
the
device to maximize the efficiency and improve the accuracy of
LDWS.
18
DVR-5HD V1.0 04/17
2.3.2 Connecting to Rear Camera
Use the micro USB cable in the product package to connect the
camera.
1.2.3.2
Connect
micro USB to
recorder
USB port.
Connecting
todrive
Rear
Camera
Use the micro USB cable in the product package to connect the
camera.
1. Connect micro USB to drive recorder USB port.
2.
Connect micro USB to rear camera USB port.
Note:
Install rear camera at upper central position of the rear windshield.
19
DVR-5HD V1.0 04/17
BatteryStatus
Status Indicator:
Indicator:
Battery
Battery Status Indicator:
Icon
Icon
Description
Description
Full battery power.
Full battery power.
2/3 battery power.
2/3 battery power.
1/3 battery power.
1/3 battery power.
Out of battery power.
Out of battery power.
Battery is charging.
Battery is charging.
Connect the car adapter to charge
Connect the car adapter to charge
Note:
Note:
Note:
Use the products supplied power charger only, please do not use other
1. 1.
Use
the
products
supplied
power
charger
only, the
please do
not
power
charger,
incorrect
chargers
may cause
1. brand
Use the
products
supplied
powerpower
charger
only, please
do not usebattery
other to
prematurely
fail
or explode
use
other
brand
of power
incorrect
chargers
brand
power
charger,
incorrectcharger,
power chargers
may power
cause the
battery tomay
2. Please
take note
the ambient temperature reaches 45°C or above, the
prematurely
fail orifexplode
cause
the
tosupply
prematurely
orreaches
explode
car
adapter
will ifstill
power
tofail
device,
but 45°C
it will ornot
charge
2.
Please
takebattery
note
the
ambient
temperature
above,
the
the
Li-polymer
battery.
This ambient
is
a normal
characteristic
of not
Li-polymer
car
adapter
will
still
power
to device,
but it will
charge
2. Please take note ifsupply
the
temperature
reaches
45°C or
and
is not a malfunction.
the Li-polymer
battery. This is a normal characteristic of Li-polymer
above,
adapter will still supply power to device, but it will
and is the
not car
a malfunction.
not charge the Li-polymer battery. This is a normal characteristic
Low
Voltage: and is not a malfunction.
of Li-polymer
Low Voltage:
Low Voltage:
Note:
Note:
the device
is connected
to the and
car turned
adapter
turned
If
theIfdevice
is connected
to the car adapter
on, and
and the
screenon,
Note:
displays
a charging
remindertosymbol
asreminder
theand
image
above,
means
If the
device
is connected
the
carsuch
adapter
turned
on, itand
the that
screen
and
the
screen
displays
a
charging
symbol
such
asthethe
available
too low. symbol
Please such
wait as
for the
a few
minutes
the charging
displays avoltage
chargingis reminder
image
above,until
it means
that the
image
above,
it means
that
the wait
available
voltage
isuntil
toothe
low.
Please
reminder
symbol
before
entering
the
video recording
mode
to
available
voltage
isdisappears
too low.
Please
for a few
minutes
charging
prevent
recording
or file damage.
reminder
symbol
disappears
before
enteringreminder
the video symbol
recordingdisappears
mode to
wait
for ainvalid
few
minutes
until the
charging
prevent invalid recording or file damage.
before
20 entering the video recording mode to prevent invalid recording
or 20
file damage.
20
DVR-5HD V1.0 04/17
2.42.4
LED Indicator
LED Indicator
Status Explanation
LED Indicator colour
Power off, battery
charging
Red
Power off, battery full
charged
LED light off
Power on, battery
charging
Red
Power on, battery full
charged
Green
Standby / Standby and
screen off
Green
Recording/ Recording
and screen off
Flash red
21
21
DVR-5HD V1.0 04/17
2.5 Powering the Device On / Off
2.5 Powering the Device On / Off
2.5.1 Auto Power On/Off
If2.5.1
the drive
recorder
is connected
Auto
Power
On/Off to the vehicle power supply, once
you
car engine,
the drive
recorder
automatically
If thestart
drivethe
recorder
is connected
to the
vehiclewill
power
supply, power
once
youstart
start recording.
the car engine,
drive
recorder
will automatically
on
and
Oncethethe
vehicle
engine
shuts down, the
power on
and start recording.
device
automatically
saves the recording and turns off the power
Once the
engine shuts down, the device automatically saves
within
10 vehicle
seconds.
the recording and turns off the power within 10 seconds.
2.5.2
Power
On/Off
andand
Reset
2.5.2Manual
Manual
Power
On/Off
Reset
2.5.2.1 Manual Power On
2.5.2.1 Manual Power On
Slide the power switch up and make
Slide
the the
power
up and
make
sure that
powerswitch
switch locks
on the
sure
thatcard
theslot.
power switch locks on the
memory
memory card slot.
On
2.5.2.2 Manual Power Off
Slide the power switch down and the
device starts its power off sequence. Do
2.5.2.2
Manual
Off it is in
not power
on thePower
device when
Slide
the power
switch
and the
the power-off
sequence,
or down
the recorded
device
itscorrupt.
power off sequence. Do Off
file maystarts
become
not power on the device when it is in the
power-off sequence, or the recorded file
2.5.2.3 Reset the Device
may become corrupt.
In case the device fails to function normally due to unknown causes,
2.5.2.3
theswitch
Device
slide theReset
power
and verify the memory card is in the
removable
wait
forto10function
secondsnormally
and slidedue
the to
power
up switch
In
case thestate;
device
fails
unknown
causes,
again the
to restart
the device.
slide
power
switch and verify the memory card is in the
removable state; wait for 10 seconds and slide the power up switch
again to restart the device.
22
22
DVR-5HD V1.0 04/17
2.6 Initial Settings
Before using the device, we recommend you setup the correct Time
2.6 Initial
zone, Settings
Date and Time.
Before using the device, we recommend you setup the correct Time
zone, Date and Time.
Note:
Please note that if you press the
button during recording, the system will
Note:stop
Please
note that if you press the
button during recording,
recording and enter OSD menu. Make sure the recording is already
the system
recording
enter OSD menu. Make sure the
stopped will
thenstop
continue
operating and
the menu.
recording is already stopped then continue operating the menu.
2.6.12.6.1
Set Time
Set zone
Time zone
Tothe
settime
the time
zone,
do the
following:
To set
zone,
do the
following:
1. Press the
button to enter the OSD menu.
1.
Press the
button to enter the OSD menu.
Press the
/
button
to
2. the
2. Press
/
button
to
select
select Setand
Timezone,
and then
Set Timezone,
then press
the
button
to
press to
the enter the
button
function
enter the function menu..
menu..
3.
Press the
/
button to
3. Press the
/
button
to set
set the current
time
zone,
and
the current
timethe
zone, and
then
then press
button
to
press the
button to complete
complete setting.
setting.
4. Press the
button to return to
recording screen.
4.
Press the
button to return to recording screen.
23
23
DVR-5HD V1.0 04/17
Greenwich
Time(GMT)
(GMT)map
map
time
zones:
GreenwichMean
Mean Time
of of
time
zones:
Note:
1. If Time Sync. is on, device clock will be calibrated via satellite clock signal
based on Set Timezone. Please refer to Satellite Synchronization (4.2).
2. If satellite positioning is not successful, device clock will run based on user
defined time.
24
24
DVR-5HD V1.0 04/17
2.6.2 Set the Date / Time
To set the correct date and time, do the following:
1.
Press the
button to enter the OSD menu.
2.
Press the
/
button to
select Date / Time, and then press
the
button
3.
Press the
/
button to
adjust the value, and then press
the
button to set the next
field.
4.
Repeat step 3 until the date and time setting is completed.
Note:
To ensure the accuracy of the video file time, please reset the date and
time when the battery is completely discharged or when the device has not
been used for over 7 days.
25
25
DVR-5HD V1.0 04/17
3 Using the Drive Recorder
3.1 Automatic Record
If the drive recorder is connected to the vehicle power supply and
power switch is in the On position once you start the car engine,
the drive recorder will automatically power on and start recording.
Recording will automatically stop when the engine is switched off.
Note:
1. Some vehicle power supplies don’t turn on / off automatically with
the car engine, if the device can not automatically power on/off
with the car engine, please manually connect the power supply
with the vehicle power, and then power on, or manually power
off the device and then release the connector with the car power
supply.
2. The device can be configured to save a video file for every 1 or 3
minutes of recording. Please refer to Record Interval (4.2).
3. All the videos and photos are saved in the memory card, if memory
card is full, loop recording will be generally overwrite the oldest
video file.
3.1.1 Resolution
1. Front Camera: 2K [email protected] (1440P 30fps) / [email protected] (1080P
60fps) / FHD HDR (1080P HDR 30fps) / [email protected] (1080P 30fps) /
[email protected] (720P 120fps).
2. Rear camera resolution setting is [email protected] (1080P 30fps), the
resolution will not change by front camera resolution setting.
26
DVR-5HD V1.0 04/17
3.1.2
TheThe
Recording
Screen
3.1.2
Recording
Screen
8
9
10
11
1
12
2
3
4
5
6
No.
Icon
Item
Description
1
Recording
Duration
Indicates
duration.
the
video
current
2
Date / Time
Indicates the current recording
date and time.
3
Menu Button
During video recording, press the
button to enter the OSD
menu.
4
PIV (Picture in
Video) Button
Press
to capture video
screen shots from the front
camera.
5
Emergency
Recording Button
During video recording, press the
button to enter emergency
recording mode. Please refer to
Emergency Recording (3.1.3).
27
27
DVR-5HD V1.0 04/17
6
Switch Camera
Button
7
Voice Record
icon
8
Resolution
icon
9
Satellite
Positioning
icon
10
Battery Power
icon
Indicates battery
charging status.
11
VIV (Video in
Video)
Indicates rear camera recording
screen.
Press
to switch VIV screen.
Indicates voice recording sets as
off, the sound will not be recorded.
Indicates the video resolution.
Indicates the strength of satellite
icon shows
positioning. If the
up on screen, it indicates that the
device cannot complete the
satellite positioning.
or
device
28
28
DVR-5HD V1.0 04/17
3.1.3 3.1.3
Emergency
Recording
Emergency
Recording
To start the Emergency Recording, do the following:
To start the Emergency Recording, do the following:
1. During
Video Video
Recording,
presspress
the
1. During
Recording,
button
to button
enter toemergency
the
enter
recording
mode, recording
the “Emergency”
emergency
mode, the
“Emergency”
message
will be
message
will be shown
immediately
shownleftimmediately
the
on the upper
corner of theon
screen,
upper left corner of the screen,
and the recorded file will be protected.
and the recorded file will be
2. The emergency
video recording length
protected.
is same
as the
recordingvideo
interval
setting.length
When isthesame
emergency
2. The
emergency
recording
as the
recording
length reaches
setting,
the system
will return
to the
recording
interval the
setting.
When
the emergency
recording
reaches
thePlease
setting,refer
the system
will return
to the(4.2).
general
general length
recording
mode.
to Record
Interval
recording mode. Please refer to Record Interval (4.2).
Note:
1. If the Collision Detection function is enabled and a collision
Note:
is detected,
the device will automatically trigger the emergency
1. If the Collision
function is enabled
and a collision
recording.
Please Detection
refer to Collision
Detection
(3.4.4).is detected, the
device will automatically trigger the emergency recording. Please refer to
2. The emergency
recording
file
is
created
as
a
new
file, which will
Collision Detection (3.4.4).
be 2.
protected
to avoid
being
normal
loop
The emergency
recording
fileoverwritten
is created as aby
new
file, which
willrecording.
be protected
to avoidcard
beingcan
overwritten
by normal
recording. video
A memory
card
can save
A memory
save up
to 20 loop
emergency
files
if record
up to 20 emergency video files if record interval time is 1 minute, and save up
interval
time
is
1
minute,
and
save
up
to
10
emergency
video
to 10 emergency video files if record interval time is set as 3 minutes. files
if record
interval
time is
as 3 minutes.
3. The notice
message
of set
“Emergency
files are full” will pop up on the screen
when the
emergencyof
recording
folder is full,
and the
emergency
filesup
will
3. The notice
message
“Emergency
files
arelater
full”
will pop
be saved in the Normal Video folder which will be over written if memory is
on the
screen
when
the
emergency
recording
folder
is
full,
and
the
full. Thus, if you want to keep newest emergency video file, please manually
later delete
emergency
files
saved in
thefolder
Normal
Video
folder
the oldest
files will
in thebe
emergency
video
to release
more capacity.
referover
to File
Deletionif (4.2).
whichPlease
will be
written
memory is full. Thus, if you want to
keep newest emergency video file, please manually delete the
oldest files in the emergency video folder to release more capacity.
Please refer to File Deletion (4.2).
29
29
DVR-5HD V1.0 04/17
3.3 Picture in Video
You can also use this device to take snapshots of the current scene.
1. 3.3
In recording
status,in
press
Picture
Video to capture recording screen shots
from the front lens.
You can also use this device to take snapshots of the current scene.
2. When the
icon shows in the central of screen, it means the
to capture recording screen
1.
In recording
status, press
screenshots
is completed.
shots from the front lens.
2.
shows in
When the icon
the central of screen, it means
the screenshots is completed.
Note:
1. The screen shots image resolution quality is depending on the video
Note:
resolution setting. Please refer to Resolution (4.2).
Thescreen
definitionshots
of picture
in video
by this product,
picture resolution
1 2.
The
image
resolution
quality the
is depending
on isthe
limited by the speed of the target object and changes in ambient lighting. The
video
resolution
setting.
Resolution
(4.2). scenes
photograph
function
is betterPlease
used forrefer
takingtostill
pictures in accident
2. The
definition
picture
in for
video
bylight.
this product, the picture
or when
the car isofstopped
to wait
a traffic
3.
It is available
only for by
the the
frontspeed
cameraof
if user
wants toobject
take pictures
during
resolution
is limited
the target
and changes
inrecording.
ambient lighting. The photograph function is better used for
.
30
taking still pictures in accident scenes or when the car is stopped
to wait for a traffic light.
3. It is available only for the front camera if user wants to take pictures
during recording.
30
DVR-5HD V1.0 04/17
3.4 Driving Safety
The following driving safety function is for reference only.
Drivers are advised to exercise discretion based on actual
road conditions.
Note:
1. The Driving Safety function is limited to triggering no more than
two alarms at the same time. If a voice and alert message have
been triggered, any other alarm will be ignored until either of the
two is settled.
2. Satellite positioning must be completed before functions such as
Speed Limit Alert, LDWS and FCWS to be enabled. Be sure to
check that Satellite positioning has been completed prior to
using the product.
3. The detections of LDWS, FCWS and FCMD may be inaccurate
when used in rain, at night or in environments of insufficient
lighting. Drivers are advised to exercise discretion based on actual
road conditions.
31
DVR-5HD V1.0 04/17
3.4.1
Speed
LimitLimit
Alert Alert
3.4.2
Speed
3.4.2
Speed
Limit
Alert
If the
Speed
Limit
Alert
produces
If the
Speed
Limit
Alertfunction
functionisisenabled,
enabled, this
this product
product produces
Ifaudible
the Speed
Limit
Alert
function
is enabled,
this product
producesisis
audible
alert
message
once
car’s location
location
alertand
andscreen
screen
message
once your
your
car’s
audible
alert
and
screen
message
onceexceeds
your car’s
location
determined
GPSand
andits
itsrunning
running speed
speed
the
limit.
determined
byby
GPS
exceeds
theset
set
limit.isTo
determined
by
GPS
and
its
running
speed
exceeds
the
set
limit.
the Speed
do following:
the following:
set To
theset
Speed
Limit Limit
Alert,Alert,
do the
To set the Speed Limit Alert, do the following:
1. Press
to enter
the OSD
menu.
1. Press
the the buttonbutton
to enter
the OSD
menu.
1. Press the
button to enter the OSD menu.
2.
Press
the
/
button
to
select
2. Press the
/ button to select
2. Press
theLimit / Alert,
button and
to select
Speed
then
Speed
Limit
Alert
and then
then
Speed
Limit
Alert,, button
and
press
the
for
presspress
the the button button
to enterfor
the
entering function menu.
function
menu
entering
function menu.
3. Press the
/
button to
3. 3.
PressPress
theupthe
/ / Limit
button
tototo
set
button
set
a Speed
Alert
up a
Speed
Limit
Alert[Off
tothis
up aset
Speed
Limit
Alert
toalarm
trigger
trigger
this
product’s
/
trigger
this product’s
[Off
/
product’s
[Off (30~125
/ 50alarm
~ 200
km/h
50 ~ alarm
200
km/h
mph)],
50
~ 200
(30~125
mph)],
and
thenkm/h
press
thepress
(30~125
mph)],
and
then
the
and
then
press setting.
the
button
to
complete
button
to
complete
setting.
button to complete setting.
to return
recording
screen.
4. Press
the button button
4. 4.
Press
the the
to return
recording
screen.
return
recording
5. Press
The alarm
screenbutton
turns to
red
to remind
you screen.
to slow down if you
5. 5.
The alarm
screen
turns
red
to
remind
you
to
slow
down if you are
The
turnsthe
redspeed
to remind
are alarm
drivingscreen
faster than
limit. you to slow down if you
driving
thethan
speed
limit. limit.
arefaster
drivingthan
faster
the speed
33
33
32
DVR-5HD V1.0 04/17
3.4.2 Parking Mode
3.4.3 Parking Mode
To monitor the vehicle when it is parked, you can activate Vibration
To monitor the vehicle when it is parked, you can activate Vibration
Detection
, or or
Motion
Detection. Follow the steps
Detection,
Motionand
and Collision
Collision Detection.
below
to change
thebelow
settings
for Parking
Mode:for Parking Mode:
Follow
the steps
to change
the settings
1. Press
the
button
to
enter
the
OSD
menu.
1. Press the
button to enter the OSD
menu.
2. P2.
ress Press
the the/
to select
/ button
button
to
Parking
Mode
, andMode,
then and
press
the
select
Parking
then
button the
to enter the
function
button
for
press
menu.entering function menu.
3. Press the
/
button to
configure Parking Mode (Vibration
Detection
Motion / and Collision
button to configure Parking Mode
3. Press / the
Detection
/ Off),
and then
pressand
theCollision button
to / complete
(Vibration
Detection
/ Motion
Detection
Off), and
setting.
button to complete setting.
then press the
• • Vibration
Vibration Detection:
Detection:
If disconnected
external
power
supply
when
the
deviceis
- If- disconnected
external
power
supply
when
the
device
is powered on, the system alert message “Wait 10
powered on, the system alert message “Wait 10 seconds
seconds to enter Vibration Detection.” This means
to enter
Vibration
Detection.”
This means
system
the system
will power
off and enter
Vibrationthe
Detection
will power
off andinenter
Vibration Detection automatically
automatically
10 seconds.
Vibration Detection Mode is triggered, when the
in-10 Once
seconds.
device
detectsDetection
any collision,
it will
automatically
power
- Once
Vibration
Mode
is triggered,
when
the
on and start recording, the event will be recorded for 60
device detects any collision, it will automatically power
seconds (per file).
on- and
startmode,
recording,
the eventis will
be recorded
60
In this
drive recorder
powered
off until for
event
seconds
(per file).
happens.
This mode is more power saving.
this mode,
drive recorder
is powered off until event
• - In
Motion
and Collision
Detection:
happens.
This mode external
is more power
powersupply
saving.when the device
- If disconnected
is powered
on, theDetection:
system alert message “Enter
• Motion
and Collision
- If disconnected external power supply when the device
34
is powered on, the system alert message “Enter parking
33
DVR-5HD V1.0 04/17
mode after 10 sec.” This means the system will enter
Motion and Collision Detection automatically in 10
seconds, and then LCD screen turn off after 30 seconds
(the device will turn off the screen temporarily, but still in
standby detection status. Press any button to turn on the
operation screen).
- In the Motion and Collision Detection mode, when the
device detects any motion in front of lens, or when the
device detects collision, the automatic record will be
activated.
- In this mode, when the device detects collision or any
motion in front of lens, the video recording will be triggered
and the event will be recorded for 10 seconds (per file). If
the event lasts more than 10 seconds, the device will keep
recording up to 2 minutes.
- In this mode, the device is in standby mode until event
happens. This mode will consume more battery power.
• Off: No parking monitoring activated.
4. Press the
button to return recording screen.
Note:
1. When Vibration Detection or Motion and Collision Detection is on,
the device records events by front camera only.
2. If battery in a fully charged condition, it can record about 20 minutes
video in Motion and Collision Detection mode. As the device is used,
the battery storage capacity will decrease gradually. This is a normal
phenomenon for the battery.
3. The video files taken in Parking Mode will be saved in “Parking Mode”
folder, which will not be overwritten by normal video files. However, if
the remaining memory capacity is not enough to save the last normal
video file, the oldest Parking Mode video will be deleted. Please always
make sure your backup Parking Mode video files.
4. Parking Mode folder can save about 40 parking mode files, when
parking mode files are full, loop recording will overwrite the oldest file.
34
DVR-5HD V1.0 04/17
3.4.4 Collision Detection
3.4.3 Collision Detection
If the Collision Detection function is enabled, this device begins
If theemergency
Collision recording
Detection
function
is any
enabled,
this device begins
once
it detects
collision.
emergency
recording
once it detects
anyfunction
collision.
of the
Sensitivity
of the Collision
Detection
is Sensitivity
set to Normal
by
Collision
Detection
function
is set tothe
Normal
by of
default,
if user
wants
default,
if user wants
to change
settings
Collision
Detection,
do the the
following:
to change
settings of Collision Detection, do the following:
to the
enter
the menu.
OSD menu.
1. the
Press thebutton button
1. Press
to enter
OSD
2. Press
/
to select
2. the
Press the
/buttonbutton
to
select
Collisionand
Detection,
and
Collision
Detection,
then press
button
then
pressto the
the
button
enter the function
for entering function menu.
menu.
/
button to
3.
3. Press Press
the the /
button
to
change the sensitivity of this
changedevice’s
the sensitivity
of
this
device’s
collision detection
collision
detection
(High Sensitivity
(High
Sensitivity
/ Normal /
NormalSensitivity
Sensitivity/ /Low
Low Sensitivity
Sensitivity / /
Off),
andpress
then press
Off), and
then
the the button
for entering
to enterbutton
the function
menu. function
4. Press menu.
the
button to return
recording screen.
4.
Note:
Press the
button to return recording screen.
1.The emergency recording file is created as a new file, which will be
protected to avoid being overwritten by normal loop recording. If
Note:
record
interval time is set as1 minute, a memory card can save up
1. The emergency recording file is created as a new file, which will be protected
to 20toemergency
video files,
and save
up to 10If emergency
avoid being overwritten
by normal
loop recording.
record interval video
time is
as1 minute,
a memory
canas
save
up to 20 emergency video files, and
files ifsetrecord
interval
time card
is set
3 minutes.
to 10 emergency video files if record interval time is set as 3 minutes.
2. The save
alertup
message
of “Emergency files are full” will pop up on the
2. The alert message of “Emergency files are full” will pop up on the screen
screen
when
the emergency
folder
full,
and thefiles
later
when
the emergency
recording recording
folder is full, and
the is
later
emergency
will
be savedfiles
in thewill
Normal
Video folder
will be
over folder
written ifwhich
memory
is
emergency
be saved
in thewhich
Normal
Video
will
full. Thus,
if you
want to keep
newest
emergency
manually
be over
written
if memory
is full.
Thus,
if you video
wantfile,
to please
keep newest
delete the oldest files in the emergency video folder to release more space.
emergency
video
file,
please(4.2).
manually delete the oldest files in the
Please refer
to File
Deletion
emergency video folder to release more space. Please refer to File
Deletion (4.2).
36
35
DVR-5HD V1.0 04/17
3.4.5 Driver Fatigue Alert
If the
Driver
Fatigue
Alert function is enabled, this product
3.4.5
Driver
Fatigue
3.4.4
Driver
Fatigue
Alert Alert
produces audible alert and screen message one hour after it has
If Driver
the Driver
Alert
function
is enabled,
thisproduces
product
If
the
Fatigue
Alert function
is enabled,
this
begun
recording
andFatigue
repeats
the
alerts
every half
hourproduct
afterwards.
produces audible
alert and screen one
message
hour
after begun
it has
audible
and screen
hour one
after
it has
To enablealert
the Driver
Fatigue message
Alert, do the following:
begun recording and repeats the alerts every half hour afterwards.
recording and repeats the alerts every half hour afterwards. To enable
To
enable
Fatigue
Alert,
the menu.
following:
1. Driver
Press
the the Driver
button
enter
thedo
OSD
the
Fatigue
Alert,
dotothe
following:
1.
ress
thethe thebutton
to enter
the
OSD
menu.
Press
button
totoenter
the
OSD
menu. Alert, and
2. P1.
Press
/
button
select
Driver
Fatigue
2. Press
/
button
to select Driver Fatigue Alert, and
then the
press the
button
2. Press the
/
button to select Driver Fatigue Alert, and
for press
entering
function menu.
then
the
button to enter
then press the
button
function
menu.
for the
entering
menu.to
/function
button
3. thePress
3. Press
theOn, and
/ thenbutton
select
press to
theselect
/
button
to
3. and
Press
the
On,
then
press
button
button
to the
enable the
select On, and then press the
to function.
enable the function.
button to enable the
4. Press function.
the
button to return
recording screen.
5. This product produces audible alert
screen
when to
Driver
4. and
Press
the message button
Fatigue
activates.
return Alert
recording
screen.
5.
button to
4. Press the
recording
screen.
Thisreturn
product
produces
audible alert and screen message when
Driver Fatigue Alert activates.
5. This product produces audible alert and screen message when
Driver Fatigue Alert activates.
37
37
36
DVR-5HD V1.0 04/17
The Headlight Warning function produces audible alert and screen
message when it detects poor lighting conditions through the
3.4.6
Headlight
Warning
recording
displays
of this
device, including driving in rainy or cloudy
3.4.5
Headlight
Warning
weather,
at night,
and infunction
basements,
parkingaudible
lots,
andalert
tunnels.
The
Headlight
Warning
function
produces
audible
alert
and screen
The
Headlight
Warning
produces
and
screen
To
enable
the
Headlight
Warning,
do
the
following:
message
when
it
detects
poor
lighting
conditions
through
message when it detects poor lighting conditions through the
the
recording displays of this device, including driving in rainy or cloudy
recording
displays
this
including
in rainy
or cloudy
button
to enter
theparking
OSDdriving
menu.
1.weather,
Press
the
at
night,ofand
indevice,
basements,
lots, and
tunnels.
weather,
at night,
and in Warning,
basements,
car parks, and tunnels. To
the Headlight
2.To enable
Press the
/
button todo the following:
enable the Headlight Warning, do the following:
Headlight
and the OSD menu.
button to enter
1. select
Press
thebuttonWarning,
1. Press
the press
the OSD
menu.
button
then
the to enter
2. P2.
ressforPress
the
/ / menu.
button
entering
the function
button toto
select select
Headlight
Warning,
and and
then
Headlight
Warning,
/
tothe
3.
button
then
pressbutton
the
pressPress
the the
tobutton
enter
select
On, and
then press
for menu.
entering
function
menu. the
function
button to enable the
3. P3.
ressfunction.
the the / /
button
button toto
Press
select select
On, and
the the
On,then
and press
then press
button to enable
the function.
button
to enable the
4. Press function.
the
button to return
recording screen.
5. This product produces audible alert
button to return recording screen.
4. Press the
and screen message when Headlight
5.
This activates.
product produces audible alert and screen message when
Warning
4.
5.
Headlight Warning activates.
button to return recording screen.
Press the
This product produces audible alert and screen message when
Headlight Warning activates.
38
38
37
DVR-5HD V1.0 04/17
.4.7 LDWS
3.4.7
LDWS
3.4.7
LDWS
3.4.6
LDWS
nce yourOnce
car’s your
location
determined
by GPS and
the LDWS
car’sislocation
is determined
by GPS
and the LDWS
Once
car’s
location
determined
byand
GPS
and
youryour
car’s
location
is isdetermined
by
GPS
and the
the LDWS
LDWS
nctionOnce
isfunction
enabled,
device
produces
alert
screen
isthis
enabled,
this
device audible
produces
audible
alert and screen
function
is
enabled,
this
device
produces
audible
alert
screen
function
is enabled,
this
produces
audible
alert
and
screen
essage
when
you
drive off
or device
change
lanes
at speeds
over
70 and
message
when
youof
drive
off of or
change
lanes
at
speeds
over
70
message when
you drive off of or change lanes at speeds over 70
m/h (43message
mph).
km/h (43when
mph).you drive off of or change lanes at speeds over 70
km/h (43 mph).
o enable
the(43
LDWS
(Lane
Departure
Warning Systems),
do the
km/h
mph).
To
enable
the
LDWS
(Lane Departure
Warning Systems),
do the
To enable the LDWS (Lane Departure Warning Systems), do the
llowing:
To following:
enable the LDWS (Lane Departure Warning Systems), do the
following:
following:
Press
thetoOSD
1.the Pressbutton
the to enter
button
entermenu.
the OSD menu.
to enter
the OSD
menu.
1. P1.
ress Press
the thebuttonbutton
to enter
the OSD
menu.
Press
the
/
button
to
2.ressPress
the /
/ button
button
to
2. P
the
to
select
Press
/
button to
select 2.
LDWS,
andthe
then press
select
then
LDWS,
andLDWS,
then and
press
thepress
select
LDWS,
and then
press
button
for
entering
the
button
for
entering
the
button
to
enter
the
function
menu.
button
for
entering
the
function menu.
function menu.
menu.
3. Press function
the
/
button to select
PressOn,
/ thepress
button
3.theand
Press
/ theto button
to
then
button
Press
the press / the button to
select 3.
and then
select
On,
and then press the
toOn,
enable
the
function.
select
On,
and
then
press
the
button to button
enableto the
enable the
function. function. button to enable the
function.
button
to return
totorecording
Press
4. P
ressPress
the the
button
to return
recording
screen.screen.
button
return
to screen.
recording
4.the
button to return to recording screen.
4. Press the
5. A
fter enabling
LDWS,
the will
screen
willtraffic
display
traffic
lane align
After
enabling
LDWS,
the
screen
display
lanetraffic
align lane
5. After enabling LDWS, the screen will display
align
After
enabling
LDWS,
thedrive
screen
will display
traffic
lane align
please
adjust
the
recorder
sothat
that
the
,icon,
please
adjust
theadjust
drive
recorder
the
icon 5. icon
, please
the
drive so
recorder
so horizontal
that the
, level
please
adjust
the drive
so lines
that the
iconand
horizontal
line
eye
level
are
overlapped
andrecorder
the
line and
the the
eye
are
overlapped
and
theslash
slash
are
horizontal
line
and
the
eye
level are overlapped
and the
slash
horizontal
linedriving
and the
eye level are overlapped and the slash
lines are
centered
incentered
the
lane.
lines in
arethe
inlane.
the
driving lane.
centered
driving
lines are centered in the driving lane.
Vanishing Point
Eye Level
Eye Level
Eye Level
Horizon
Vanishing Point
Vanishing Point
Horizon
Horizon
39
39
39
38
DVR-5HD V1.0 04/17
6. This product produces audible alert and screen message when
6.
This
product produces audible alert and screen message when
LDWS
activates.
LDWS activates.
Note:
Note:
1. 1.
Please
frontwindshield
windshield
viewing
area,
nottheblock
the
Pleasemeasure
measure front
viewing
area, do
not do
block
driver's
forwardforward
field of vision,
and
install and
the device
rearview
mirrorrearview
(upper
driver’s
field of
vision,
installbelow
the device
below
central of the front windshield). We recommend that the sky and the ground
mirror
(upper
of the
frontinstall
windshield).
that
occupied
50 %central
of the video
screen,
the bracket We
thenrecommend
adjust the device
the
occupied
% of the
video
screen,
install
to sky
makeand
the the
laneground
is aligned
to the lane50alignment
icon.
Correct
installation
makes
the device
maximize
efficiency
and improve
the is
accuracy
the
bracket
then to
adjust
the the
device
to make
the lane
alignedof to
LDWS.
the
lane
alignment
icon.
Correct
installation
makes
the
device
2. Make sure that traffic lane align icon will not be obscured other things
(e.g. to
maximize
thecause
efficiency
and improve
the isaccuracy
hood). It may
misjudgment
if the endpoint
obscured. of LDWS.
2. Make sure that traffic lane align icon will not be obscured other
things (e.g.hood). It may cause misjudgment if the endpoint is
obscured.
40
39
DVR-5HD V1.0 04/17
Once your car’s location is determined by GPS and the FCWS
3.4.8
FCWS this device produces audible alert and screen
function
is enabled,
Once
your you
car’sdrive
location
is determined
by GPS
and and
the are
FCWS
message
when
at speeds
over 60 km/h
(37 mph)
3.4.7
FCWS
is enabled,
audible
alert
and not
screen
less function
than 15m
away fromthis
thedevice
car inproduces
front of you.
If the
device
Once
your car’s
location
by
GPS (37
and the and
FCWS
message
youpositioning,
driveisatdetermined
speeds
over
60 km/h
completes
thewhen
satellite
and the
leading
vehiclemph)
distance are
function
ismeters,
enabled,
thisalso
device
alert
and
screen
less
15m itaway
from
the produces
car a
in warning
frontaudible
of you.
If the
device
not
below
15than
will
produce
screen
and
voice
message
whenthe
you
drive positioning,
at speeds over
60 km/h
(37
mph) distance
and are
completes
satellite
and the
leading
vehicle
reminder.
below
15
it willthe
also
produce
a of
warning
andthe
voice
To enable
the meters,
FCWS
(Forward
Collision
Warning
do
less
than 15m
away from
car
in front
you.System),
Ifscreen
the device
does
reminder.
following:
not
have
GPS, and the leading vehicle distance is below 15 meters,
To enable the FCWS (Forward Collision Warning System), do the
it1.willfollowing:
also produce
abutton
warning
screen
to enter
the and
OSDvoice
menu.reminder. To enable
Press
the
the FCWS (Forward Collision Warning System), do the following:
2.
the the /
button
to
button
to enter
the OSD menu.
1.Press
Press
select FCWS, and then press
1. Press
the
button
to
enter
the
2.the Press the
/ entering
button to
button for
OSD
menu.
select
FCWS, and then press
function
menu.
2. Press the
/ button
button
to select
for entering
3. FCWS,
Press
the then
/ press
button
function
menu.
and
theto
selecttoOn,
and then pressmenu.
the
button
enter
3. Press
thethe function
/
button to
theselect
3. Press the button/ to enable
button to
select On, and then press the
On,function.
and then press the
button to
button to enable the
enablefunction.
the function.
4. Press the
button to return
recording screen.
5. This product produces audible alert
button to return recording screen.
4. Press the
and screen message when FCWS
5. activates.
product
audible
and
screen message
toalert
return
recording
screen. when
4.ThisPress
theproducesbutton
FCWS activates.
5. This product produces audible alert and screen message when
FCWS activates.
41
41
40
DVR-5HD V1.0 04/17
3.4.8 FCMD
3.4.9 FCMD
If FCMDfunction
is enabled
then the device will determine if an object (car) in
If FCMD
is enabling, the device will determine it from front
3.4.9
FCMD
in front
of the
device, within 0.3~4 meters.
car about
0.3 ~function
4 meters.
When thethe
front
object
aboutit3from
~ 5 front
If FCMD
is enabling,
device
willmoves
determine
If thecar
front
moves,
but the
device
does
not
start
to
seconds
andobject
the
notforward,
start
to drive
forward,
device
will
about
0.3car
~ 4did
meters.
When
the front
objectthe
moves
about
3~5
issue
audible
alert
and
screen
message.
moveseconds
, after 3~5
seconds
the
device
will
emit
an
audible
warning
and
and the car did not start to drive forward, the device will
To
enable
FCMD
(Front
Move
Detection), do the following:
display
a the
message
on
the Car
LCD
screen.
issue
audible
alert
and
screen
message.
1.
Press
the
button
to
enter
the
OSD
menu. do
To
enable
the
FCMD
(Front
Car
Move
Detection),
dothe
thefollowing:
following:
To enable FCMD (Front Car Movement
Detection)
/
buttontoto
2. Press
the
1. Press
button
enterthe
the OSD menu.
1. Press
the the button
to enter
select
FCMD,
press
/
button to
2. Press
the and then
OSD
button
for
entering
the menu.
select FCMD, and then press
2. Press
the menu./
button to select
function
button for entering
the
and
press
the
/
button tobutton
3. FCMD
Press,function
the then
menu.
On,
and
the
toselect
enterPress
the function
/ press button
to
3.
the thenmenu.
button
the
3. Press the
/ toandenable
button
to select
select
On,
then press
the
function.
On,
and then press
button
buttontheto enable
theto
enablefunction.
the function.
4. Press the
button to return
recording screen.
5. This product produces audible alert
button
to return
recording
screen.
4. and
Press
the message
screen
when
FCMD
is
5. activates.
This
product
produces
audible
alert
and
screen
button to return recordingmessage
screen. when
4. Press the
FCMD
is activates.
5. This
product produces audible alert and screen message when
FCMD is activates.
Note:
Note:
The
will detects
thechange
front image
to determine
FCMD notification
Thedevice
device
detects
atchange
the front
the vehicle
to determine
Note:
alert, so if the car is in rest condition and front object moves, the device may
The
device
will
detects
the front
image
to determine
FCMD
notification
FCMD
alerts.
If the
device
stationary
but the
object
moves
a
occur
false
judgment,
and
please
judge
it change
according
tofront
the actual
driving
so if the car is in rest condition and front object moves, the device may
situation.
little alert,
the device
will alert. Please be alert and use your judgement to
occur false judgment, and please judge it according to the actual driving
assess
the actual driving condition.
situation.
42
42
41
DVR-5HD V1.0 04/17
3.5
File
Playback
File
Playback
3.5
File
Playback
3.53.5
File
Playback
3.5
File
Playback
3.5.1
Playing
Videos
3.5.1
Playing
Videos
3.5.1
Playing
Videos
3.5.1
Playing
Videos
3.5.1
Playing
Videos
Playback video record files as follows:
Playback
video
record
files
asfollows:
follows:
Playback
video
record
as
Playback
video
record
files
as
Playback
video
record
filesfiles
asfollows:
follows:
1.Press
Press
thebutton
button
enter
theOSD
OSD
menu.
Press
button
totoenter
the
menu.
1.
ress
the
tototo
enter
the
menu.
1.
Press
the
button
enter
the
OSD
menu.
1. P1.
the the
button
enter
theOSD
OSD
menu.
2. Press the
/
button to select
2.Press
Press
the / / / / button
button
Press
button
2.2. 2.Press
the
toto toto
the the
button
File
Playback,
and
then and
press
the
select
File
Playback,
and
then
select
Playback,
then
select
File
Playback,
then
select
FileFile
Playback,
andand
then
button
tothe
enter
the function
menu.
button
for
press
the
button
press
button
for
press
button
for for
press
the the
entering
function
menu.
entering
function
menu.
3. Press
thefunction
/menu.
button to
entering
entering
function
menu.
select Video / Parking Mode /
3.Press
Press
the / / / / button
button
Press
button
3.3. 3.Press
the
toto toto
the the
button
Emergency,
and then press
the
select
Video
/
Parking
Mode
select
Video
/
Parking
Mode
//
select
Video
/
Parking
Mode
select
/ Parking
button
forVideo
entering
menu. Mode/ /
Emergency,
and
then
press
the
Emergency,
then
press
Emergency,
and
then
press
the
Emergency,
andand
then
press
the the
button
for
entering
button
entering
button
for
entering
button
for for
entering
menu.
menu.
menu.
menu.
4. P4.
ress
button
browse
video
files,
select
the
video
button
browse
video
files,
select
thevideo
video
4.Press
Press// / / / button
button
toto
browse
video
files,
select
the
Press
tototo
browse
video
files,
select
the
4.
button
browse
video
files,
select
thevideo
video
4. Press
filefileand
then
press
the
button
to
enter
Playback
Mode
. If
button
to
enter
Playback
Mode.
file
and
then
press
button
to
enter
Playback
Mode.
file
and
then
press
button
to
enter
Playback
Mode.
If
and
then
press
button to enter Playback Mode. If IfIf
file and then press
thumbnail
shows
indicates
that
the
file
is
dual-lens
icon,
indicates
that
the
dual-lens
thumbnail
showsicon,
icon,
ititindicates
that
the
isisdual-lens
thumbnail
shows
icon,
itititindicates
that
the
file
isfile
dual-lens
thumbnail
shows
icon,
indicates
that
the
file
isfile
dual-lens
thumbnail
shows
recording.
InInthe
Playback
Mode
, you
can
use
the
button
to
button
to
recording.
thePlayback
Playback
Mode,
you
can
use button
button
recording.
InIn
the
Mode,
toto to
recording.
Playback
Mode,
you
can
use
button
recording.
Inthe
the
Playback
Mode,
youyou
cancan
useuse
switch
the
front
and
rear
lens
recording
file.
switch
the
front
and
rear
lens
recording
file.
switch
the
front
and
rear
lens
recording
file.
switch
the
front
and
rear
lens
recording
file.
switch the front and rear lens recording file.
5.Press
Press
the repetitively
repetitively
return
recording
screen.
Press
repetitively
totoreturn
recording
screen.
5.5. 5.Press
the
return
recording
screen.
the the
repetitively
return
recording
screen.
5. Press
the
repetitively
tototo
return
recording
screen.
43
43
43 43
42
DVR-5HD V1.0 04/17
3.5.2 Viewing Pictures
3.5.2
Viewing
Pictures
View
pictures
as follows:
View
pictures
follows:
3.5.2 Viewing Pictures
pictures
1. View
Press
the as follows:
button to enter the OSD menu.
1. Press the
button to enter the OSD menu.
Press
the
to enter
2. 1. Press
the
/ button
button
to the OSD menu.
select
File
Playback,
and
then
2. P2.
ressPress
the the/
to select
/button
button
to
button
selectthe
File
Playback,
and for
then
Filepress
Playback
, and
then
press
the
entering function menu.
button
for
press
buttonthe
to enter the
function
entering
/ menu.
button to
3.menu.
Press
the function
enter Picture, and then press
/
button to
Press the
button
for
entering
the
3. Pressenter
the Picture,
/
button
topress
enter
and
then
menu.
button
for the
entering
the and then
Picture,
press
buttonmenu.
for entering menu.
3.
4. Press
/
button to browse
the photo file, /selectbutton
the file
and then
to browse the photo file , select the file
4. Press
press
button
to
enter
the
photo
button
to enter
the photo
Playback
then press
/
button
to browse
the photo
file , select
the file
4. and
Press
Playback
Mode. Mode.
and then press
Mode.
5.5.Press
thethe
Press
5.
Press the
button to enter the photo Playback
repetitively
to return
recording
repetitively
to return
recordingscreen.
screen.
repetitively to return recording screen.
44
44
43
DVR-5HD V1.0 04/17
3.5.3
Playback
Screen
3.5.3
Playback
Screen
Video Playback Screen
Picture Playback Screen
1
1
9
2
3
4
5
6
7
8
10
No.
Icon
Item
9
11
3
4
12
13
Description
1
File Number /
Total File
Indicates of the total number of
files.
2
Fast Forward
/ Fast Rewind
icon
Indicates video fast-forward and
rewind status.
3
File Name
Indicates the file name of video /
picture.
4
Return
Press the
button to return
preview screen of video or picture.
Press the
button repetitively to
return recording screen.
5
/
Fast Rewind /
Previous File
Button
When playing videos, press the
button will reverse the playback.
button to view previous
Press
file.
6
/
Fast Forward /
Next File
Button
When playing videos, press the
button to fast forward playing video.
button to view next file.
Press
7
/
Playback/
Pause button
Press the
button to play or
pause the video.
45
44
DVR-5HD V1.0 04/17
No.
Icon
Item
Description
8
Lens Switch
Button
In playback mode, press
button to switch files with dual lens
recording file.
9
Battery icon
Indicates
status.
10
Playback
Duration / Total
Duration
Indicates video playback time and
total duration.
11
Date and time
Indicates the date and time of film.
12
Previous File
When viewing pictures, press the
button will switch over to the
previous file.
13
Next File
When viewing pictures, press the
button will switch over to the
next file.
Battery
or
charging
46
45
DVR-5HD V1.0 04/17
3.6 Deleting Files
To delete file(s), do the following:
3.6 Deleting Files
1. Press
the
button
to enter the OSD menu.
3.6
Deleting
Files
To delete file(s), do the following:
To delete file(s), do the following:
2. P1.
ress Press
the the/
button
to enter
select
button to
Deletion
, and
then press
the
the
menu.
1. File
Press
theOSD
button
to enter
thebutton
OSD menu.
the
to enter the function menu.
/
button to
2. Press the
buttonand
to then
2. Pressselect
the File/ Deletion,
3. Pselect
ress the
button
to select
File Deletion,
andbutton
then
for
press
the/
Video
/ the
Parking
Mode
/ Emergency
function
menu.
button
for
pressentering
menu.
/ entering
Picture,function
and then
press the
/
button to
3. Press the
button
for
entering
menu.
/
/ / Parking
button Mode
to
3. Pressselect
the Video
/ Picture,
and/ then
selectEmergency
Video / Parking
Mode
Emergency
Picture, andbutton
then for
press /the
menu. button for
pressentering
the
entering
menu. One:
•One:
Delete
• Delete
• Delete
buttonDelete
to select
One,press
and
Press
thebutton/ to select
- Press
the - One:
/
OneDelete
, and then
/ menu.
button
to to
select
One, and
-button
Press
the
press
button
enterDelete
the menu.
tothen
enter
the
then press
button to enter the menu.
- Press
/
button to browse files , select the files
Pressyou want
/
to and
browse
files
, select the button
files
to
tobutton
delete
then
press
- Press you/ want
to browse
files,
select the files
you want
to
enterbutton
thedelete
menu.
button
to
to
and then
press
delete and
then
button to enter the menu.
enter
thepress
menu.
-
46
47
DVR-5HD V1.0 04/17
47
- Press
/ to select
buttonitem,
to select
item,
andthe
then
- Press the
/ the button
and then
press
- Press
the
//
button
toto select
and then
press
the
button
confirmitem,
or cancel
the
/
button
to
confirm
or
cancel
the
selection.
press the
/
button to confirm or cancel the
-
Press the
selection.
selection.
press the
selection.
/
button to select item, and then
button to confirm or cancel the
/
• Delete
All:
• Delete
All:
• -Delete
All:the
/
select All
Delete
Press
- Press the
/
button
tobutton
selecttoDelete
, and All,
thenand
press
/ button
button
to select
Delete All, and
PressAll:
the
• - Delete
to enter
the menu.
then
press
button
to
enter
the
menu.
3.5 then
File
Playback
button to enter the menu.
press
-
Press the
then press
/
button to select Delete All, and
button to enter the menu.
3.5.1 Playing Videos
Playback video record files as follows:
1.
Press the
button to enter the OSD menu.
Pressthe
the
buttontoto select item, and then
2. - Press
//
button
- select
Press
thePlayback,
//
button
and then
pressFile
the
button
confirmitem,
or cancel
the
and
thentoto select
press
the
button
to confirm
or cancel
the
- press
Press/the
the button
/ button
select
item,
then
selection.
for to
- Press the
tobutton
select
item,
and
thenand
press
the
selection.
press function
the
/
button to confirm or cancel the
entering
menu.
/
button to confirm or cancel the selection.
selection.
3. Press the
/
button to
select Video / Parking Mode /
Emergency, and then press the
button for entering
4. Pressmenu.
the
repetitively to return recording screen.
4. Press the
repetitively to return recording screen.
Press
repetitively
to return
recording
screen.
4. 4.
Press
the the repetitively
to return
recording
screen.
Note:
Note:
icon, and then the files records with rear lens will be
the file has the
1. Note:
Othe
nly
front
thumbnails
display
Menu,
youwill
choose
icon,press
and thenwill
thebe
files
records
with
rear iflens
be
file
hascamera
the
button
to in
enter
Mode.
If
and thumbnails
then
1.deleted.
Only frontfile
camera
will be display
in Menu,
if you Playback
choose to delete
2.todeleted.
Deleted
files
cannot
be
recovered.
Ensure
the
files the
have
already
delete
thethe
file has
the
icon,
and
then
records
with
icon,
indicates
that
the
file
iswill
dual-lens
thumbnail
shows
icon,
and then
the itfiles
records
withfiles
rear
lensbackup
be
the
file has
2. before
Deleteddeletion.
files cannot be recovered. Ensure the files have already backup
deleted.
rear
lens
will be deleted.
button to
recording.
Playback
Mode,
deletion.
2.before
Deleted
files cannot In
bethe
recovered.
Ensure
the you
files can
haveuse
already backup
1. Only front camera thumbnails will be display in Menu, if you choose to delete
Note:
/
button
to browse
video
files,
select
the video
1. Only4.frontPress
camera thumbnails
will be display
in Menu,
if you
choose
to delete
2.48
Deleted
files
cannot
beand
recovered.
thefile.
files have already
switch
the front
rear lens Ensure
recording
before deletion.
48
backup before deletion.
48
47
DVR-5HD V1.0 04/17
4 Adjusting the Settings
4 Adjusting the Settings
4.14.1
UsingUsing
the Menu
the Menu
You
can
generalsettings
settings
on-screen
display
You
cancustomize
customize the
the general
viavia
thethe
on-screen
display
(OSD)
menus.
(OSD)
menus.
Press
button
to enter
OSD
menu.
to enter
the the
OSD
menu.
1. 1.
Press
the the button
/ button
button
to select
menu
item,
Press
2. 2.
Press
the the /
to select
menu
item,
and and
thenthen
press
button
enteringmenu.
function menu.
the
the pressbutton
to enter
thefor
function
button
to select
or adjust
value,
Press
3. 3.
Press
the the / / button
to select
or adjust
thethe
value,
andand
then
button
to
confirm
setting.
then
press
the
press the
button to confirm setting.
button to return recording screen.
4. Press the
4. Press the
button to return to the recording screen.
49
48
DVR-5HD V1.0 04/17
on this feature, it will display
the satellite time
preferentially, and cannot be
manually changed.
The system displays the
Speed Unit
Km/h / mph
speedfor
setting
unit.of main menu and function list.
Refer to the below table
details
If the Speed Cam Alert
Menu option
Description
Available option
function is enabled, once
Select
the location
file category
that
Video / Parking Mode
your
car’s
is
File Playback
want to by
view.
/On
Emergency
/ Picture
determined
GPS and
Speed Cam Alert you
/ Off
Displays
the acurrent
approaches
speed state
cam,of
Satellite Status
the
this satellite
product reception.
produces audible
If
theand
satellite
time
is
alert
screen
message.
enabled,
thePoint:
drive recorder
Add Speed
The
clock
willpositioning
synchronize
satellite
will
according
to the
satellite
time
manually add
speed
camera
Satellite
zone
youYou
set. can
When
you
On / Off
location.
add
upturn
to
Synchronization
Add Speed Point /
on
feature,
it willlocations
display
Speed Position
200this
speed
camera
Delete Last Position /
the
satellite
Management
to the
built-intime
system.
Delete All Position
preferentially,
and cannot
be
Delete Last Position:
Delete
manually
changed.
the last speed
camera point.
The
system
displays the
Delete
All Position:
Delete
Speed Unit
Km/h / mph
speed
setting
unit.point.
all speed
camera
Set a customized maximum
Press the
/
speed limit. When the vehicle button to set the
speed exceeds the
speed limit. You can
Speed Limit Alert maximum, an audible alert is
set off, or set the
automatically triggered and a speed limit from 50 to
warning message is
200km/h
(30
to
displayed on the screen.
125mph)
4.2 Menu Items
50
Speed Limit Alert
Set a customized maximum
speed limit. When the vehicle
speed exceeds the
maximum, an audible alert is
automatically triggered and a
warning message is
displayed on the screen.
Press the
/
button to set the
speed limit. You can
set off, or set the
speed limit from 50 to
200km/h
(30
to
125mph)
50
49
DVR-5HD V1.0 04/17
Menu option
Description
Available option
Set the time zone you are in.
Press the
/
button to set the
satellite time. You
may customize it
between GMT -12:00
~ GMT +14:00
Set the date and time.
Press the
/
button to adjust the
value, and then press
the
button to
set the next field, and
complete setting
Language setting.
English / Deutsch /
Nederlands / Français
/ Español / Italiano
If the time stamp is enabled,
recording files or photos will
show the date and time.
On / Off
Setting of video resolution.
2K [email protected] (1440P 30fps) /
[email protected] (1080P 60fps) /
FHD HDR (1080P HDR
30fps) /
[email protected] (1080P 30fps) /
[email protected] (720P 120fps)
Setting of exposure value.
/
Press the
button to set the
exposure value. It can
be set between -2 ~
+2
LCD Setting
Set LCD off time. Device
screen will be off after a set
time if no operation is
detected during the standby
or record mode. Press any
button will switch it on.
(Recording is not affected
when screen is off).
On / Off After 30 sec. /
Off After 3 min. / Off
Voice Record
Setting for activating audio in
the video.
On / Off
Set Timezone
Date / Time
Language
Settings
Time Stamp
Resolution
EV
51
50
DVR-5HD V1.0 04/17
Menu option
Volume
Record Interval
Description
Available option
Adjust the sound volume.
/
Press the
button to set the
volume. It can be set
between 1 ~ 10
Save respective video files in
a length of the selected
duration.
1 min. / 3 min.
Vibration Detection: If
Vibration Detection is
enabled, please disconnect
the external power supply
device in power on status, it
will automatically power off
and enter the detection mode
after 10 seconds. The device
will automatically power on
and start recording when the
device detects vibration.
Parking Mode
Motion and Collision
Detection: If Motion and
Collision Detection is
enabled, please disconnect
the external power supply
device in power on status, it
will automatically power off
and enter the detection mode
after 10 seconds. The device
will automatically power on
and start recording when the
device detects motion and
collision.
Vibration Detection /
Motion and Collision
Detection / Off
Off: No parking monitoring
activated.
Collision Detec.
If Collision Detection is
activated, this device starts
emergency recording once it
detects any collision.
High Sensitivity /
Normal Sensitivity /
Low Sensitivity / Off
52
51
DVR-5HD V1.0 04/17
Menu option
WDR
Driver Fatigue
Alert
Headlight
Warning
LDWS
FCWS
FCMD
Description
Present a crisp and clear
picture quality with
harmonious contrast in a
high contrast, high
discrepancy environment.
When Driver Fatigue Alert is
enabled, audible alert and
screen message will be
activated 1 hour after the
device is powered on, with a
repetition every 30 minutes.
When Headlight is activated,
device will issue an audible
alert and screen message
reminding that insufficient
brightness is sensed on the
recording face.
Once your car’s location is
determined by GPS and the
LDWS function is enabled,
this device produces audible
alert and screen message
when you drive off of or
change lanes at speeds over
70 km/h (43 mph).
When FCWS is activated
after satellite positioning,
device will issue audible alert
and screen message when
vehicle speed is above 60
km/h (37 mph) and the
distance with the front vehicle
is less than 15m.
If FCMD function is enabled,
the device will determine it
from front car about 0.3 ~ 4
meters. When the front object
moves about 3 ~ 5 seconds
and the car did not start to
drive forward, the device will
issue audible alert and
screen message.
Available option
On / Off
On / Off
On / Off
On / Off
On / Off
On / Off
53
52
DVR-5HD V1.0 04/17
Menu option
File Deletion
Anti-flicker
Format
Default Setting
Firmware
Version
Description
Available option
Delete the file(s).
Video / Parking Mode
/ Emergency / Picture
Domestic power supply
varies by area. It is
recommended that you
should check the “Table of
voltage and frequency of
different countries” for the
correct setting.
60Hz / 50Hz
Format the memory card
Format the memory card.
inserted in the equipment. All
All the files in the card
the files in the card will be
will be erased.
erased.
Yes / No
The system reverts to the
default setting.
Yes / No
Indicates the current firmware
version.
54
53
DVR-5HD V1.0 04/17
5 Connecting to Other Devices
5 Connecting
to Other
5.1 Connecting
to the Computer
Devices
5.1
Connecting
Computer
You can
connect
the deviceto
tothe
a desktop
computer or notebook to
can connect the device to a desktop computer or notebook to
transferYou
or
view
files.
transfer or view files.
1. Connect
micro micro
USBUSB
cable
totothe
micro
1. Connect
cable
the device
device micro
USBUSB
port. port.
3.5
File
2. Connect the
other end
of USBPlayback
cable to an available USB port of
2. Connect
the
other
end
of
USB
cable
to
an
available
USB port of
your computer.
your computer. 3.5.1 Playing Videos
Playback video record files as follows:
1. Press
button to enter the OSD menu.
3.5
FilethePlayback
2. Press
the Videos
/
button to
3.5.1
Playing
select File Playback, and then
Playback
videothe
record files as
follows:
button
for
press
entering function menu.
1. Press the
button to enter the OSD menu.
3. on
Power
the device,
the computer
computer screen will show
upshow
the
3. Power
theon device,
the
will
up the
3. the
Press
thedetects /yourscreen
button
to "Open
message when
computer
device,
select
2.thefiles",
Press
the detects
/
button
to
messagefolder
when
computer
your
device,
select “Open
to view
or open the
"Removable
Disk",
then users
selectFile
Video
/ Parking
select
Playback,
andMode
then /
save
the files
to
your computer.
folder tocan
view
files”,
orEmergency,
open
the “Removable
Disk”,
and then
press
thethen users can
button
for
press
the
saveNote:
the files to your
computer.
button
for
entering
entering
1. This only indicates the
device canfunction
connect to menu.
the computer; micro USB cable
menu.
not included in standard
package.
Note: 2. is
Under dual-lens
mode,
the
recording
files
will
separately
3. Press the
/ be saved
button
to in different
folders, "F" folder is for front camera files, "R" folder is for rear camera files.
1. This only indicates the device can connect to the computer; micro USB
3. If user only deletes select
front camera
files with
on computer,
Video
/ Parking
Modethen
/ the rear
cable iscamera
not included
files wouldinbestandard
unavailable,package.
also it couldn’t be overwritten by loop
Emergency,
and
then
press
the
recording.
To
avoid
residual
files
occupy
memory
capacity,
please
delete separately
the
2. Under dual-lens mode, the recording files will be saved
in
files by computers, or format the memory
card for
by the device.
Please refer to
button
entering
different
folders,
folder
is
for
front
camera
files,
“R”
folder
is for
rearselect
Format
(4.2). “F”
/
button to browse video
files,
4. Press
menu.
4. If user only deletes rear
camera files with
on computer, then the device
cameracan
files.
button to enter Playback
file
andfiles
then
only review the front
camera
whichpress
hasn’t been deleted.
The micro
USB cable
will
not
supply
the
power
to
please
power then
on that
3. If user5. only
deletes
front
camera
files
with
on
computer,
the rear
icon,
it indicates
the file is
thumbnail shows the device,
the device and make sure it has enough battery power, or take out the
cameramemory
files would
be the
unavailable,
also it couldn’t be overwritten by loop
card to read
files.
recording. In the Playback Mode, you can use
recording. To avoid residual
files
memory
capacity,
please
delete
switch
theoccupy
front and
rear lens
recording
file.
56
the files by computers,
or format /the memory
by the video
device.files,
Please
button card
to browse
select th
4. Press
refer to Format (4.2). file and then press
button to enter Playback M
4. If user only deletes rearthumbnail
camera files
with
on
computer,
then that
the device
icon,
it indicates
the file is d
shows
can only review the front camera files which hasn’t been deleted.
b
recording. In the Playback Mode, you can use
5. The micro USB cable will
not supply
theand
power
the device,
please
switch
the front
reartolens
recording
file. power
on the device and make sure it has enough battery power, or take out the
memory card to read the files.
5.
Press the
repetitively to return recording
54screen
DVR-5HD V1.0 04/17
use to
HDMI cable transfer to TV to play the file.
/ You can
button
Playback,
and then
1. Power
on the device.
5.2
Connecting
to TV
5.2
to TV
button
for HDMI
e
2. Connecting
Connect
cable to device
You
can
use
HDMI
cable
transfer
playthe
thefile.
file.
nctionYou
menu.
can
useport.
HDMI
cable
transfer
to to
TVTV
totoplay
HDMI
1.3.Power
on the
device.
HDMI
to TV HDMI
1.Connect
Power
on
thecable
device.
button to
port.Connect
to device
2. C2.
onnect
HDMI HDMI
cable cable
to device
HDMI
eo / Parking Mode
/ port.
HDMI
3. Connect
HDMI
cable to TV HDMI port.
/
port.
cy, and then
the HDMI cable to TV HDMI
3. press
Connect
utton for entering
port.
4.button
Power
on TV, video
switch
TVselect
signaltheinput
to
/
to browse
files,
video
TV
screen
will show
icons,toIf HDMI, TV screen will
button
to switch
enter
Playback
en press
4.HDMI,
Power
on
TV,
TV below
signal Mode.
input
by device
icon,operate
it indicates
that
the fileplease
is dual-lens
shows please
show
below
icons,
operate
by
device
/
/
/
/
buttons.
button to
In the Playback /Mode,
/ you
/ can use
/
buttons.
4. lens
Power
on TV,file.
switch TV signal input to HDMI, TV screen will
front and rear
recording
show Picture
below
icons,
please
operate
by
device
Emergency
Parking
/ Mode
/
Video
/
/
buttons.
Picture
Emergency
Parking Mode
Video
repetitively to return recording screen.
Note:
Note:
1. It only indicates this device can connect to TV, 43
HDMI cable is not included in
1. Istandard
t only indicates
package. this device can connect to TV, HDMI cable is not
2. included
Please make
the device
power is on before using HDMI cable connecting
in sure
standard
package.
toNote:
TV.
2. Please
make
sure
the
device
using
HDMI
cable
1. It only indicates this device can power
connect is
to on
TV,before
HDMI cable
is not
included
in
standard package.
connecting
to TV.
57 2. Please make sure the device power is on before using HDMI cable connecting
to TV.
57
55
DVR-5HD V1.0 04/17
6 Installing the Software
1. Place the attached CD ROM into the CD player.
2. If the CD does not execute automatically, please use Windows File
Manager to execute the Install_CD.exe file in the CD.
The following screen will be shown
3. Press the [Menu] item to start the installation process according to
the instructions on-screen.
Visit www.snooperneo.co.uk for the latest version of the Snooper
Player and user guide.
56
DVR-5HD V1.0 04/17
7. Snooper Player
7 Snooper DVR
7
8
9
10
11
12
13
14
15
1
2
3
4
16
5
6
No.
Item
No.
Item
1
Video Player
9
File Path
2
Play / Pause
10
Browser File
3
Previous
11
File List
4
Next
12
File Name
5
Stop
13
Volume
6
Google Maps
14
Playback Duration / Total
Duration
7
Compass
15
Signal Noise Ratio (SNR)
8
Speed Meter
16
G-Sensor
Note:
1. To display the route on Google Maps, please make sure the internet is
connected before starting the video playback.
2. Video files of front camera (MOV) and GPS/G-Sensor files (NMEA) must be
stored in the same folder before starting the playback.
3. The Snooper DVR software is only applicable to Windows operating system.
58
57
DVR-5HD V1.0 04/17
8 Specifications
8
Specifications
Item
Image Sensor
Effective Pixels
Storage Media
LCD Display
Lens
Focus Range
Satellite System
Movie Clip
Description
Front
1/3” CMOS sensor
Camera
Rear
1/2.7” CMOS sensor
Camera
Front
2688 (H) x 1520 (V)
Camera
Rear
1920 (H) x 1080 (V)
Camera
Support SDHC class 10 and 16GB microSD card (up
to 32GB)
3.0" TFT LCD color screen
Front
Wide Angle Fixed Focus lens F1.8, f=2.94mm
Camera
Rear
Wide Angle Fixed Focus lens F2.0, f=3.8mm
Camera
Front
1.5m~Infinity
Camera
Rear
1.5m~Infinity
Camera
GPS
Resolution: 2K [email protected] (1440P 30fps) /
[email protected] (1080P 60fps) / FHD HDR (1080P
Front
HDR 30fps) / [email protected] (1080P 30fps) /
Camera [email protected] (720P 120fps)
Format: MOV
Rear Resolution: [email protected] (1080P 30fps)
Camera Format: MOV
59
58
DVR-5HD V1.0 04/17
Item
Still Image
Shutter
G-Sensor
Description
Resolution: 4M (2688 x 1520)
Format: JPEG
Electronic shutter
Auto: 1/33, 120~1/30 sec.
3-Axis G-Force sensor
ISO
Auto
White Balance
Auto
Microphone
Yes
Speaker
Yes
Interface
Mini USB; Micro USB; Mini D Type HDMI
Battery
Built-in 470mAh Li-polymer rechargeable
Operating
Temperature
0° ~ 60° C
Operating
Humidity
20 ~ 70% RH
Storage
Temperature
-20° ~ 70° C
Dimensions
89 x 28.5 x 53 mm
Weight
Approx. 86g (without memory card)
60
59
DVR-5HD V1.0 04/17
10 Service Under Warranty
Snooper comes with a standard 12 month manufacturer’s warranty.
If, for some reason your unit requires service under warranty return
Snooper by special delivery and in suitable packaging to:
The Returns Dept.,
Performance Products Limited,
Cleaver House,
Sarus Court, Stuart Road,
Manor Park,
Runcorn WA7 1UL.
Tel: 0333 121 2252
For further detail please visit:
http://www.snooperneo.co.uk/Returns.cfm
Enclose the following information:
(a) Your name, address and a full description of the problem.
(b) Telephone number where you can be reached during business hours.
(c) Serial number of your unit.
(d) Proof of Purchase
PLEASE NOTE: We cannot process any warranty claims unless proof
of purchase is provided. Please retain your receipt as a precaution. Full
terms and conditions of warranty are available on request.
Limited Warranty
This Snooper product is warranted against all defects in materials and
workmanship for a period of one (1) year from the date of original purchase,
when purchased from an authorized Snooper dealer.
ALL PURCHASES OF SNOOPER PRODUCTS FROM NON-AUTHORIZED
SNOOPER DEALERS ARE SUBJECT TO FURTHER WARRANTY
RESTRICTIONS AS DESCRIBED OVERLEAF.
60
DVR-5HD V1.0 04/17
The conditions of this Limited Warranty and the extent of responsibility of
Performance Products Ltd (PPL) under this Limited Warranty are as follows :
1. This Limited Warranty will become void if service is performed by anyone
other than an approved Snooper Warranty Service Centre that results in
damage to the product.
2. This Limited Warranty does not apply to any product which has been subject
to misuse, neglect or accident, or which has had the serial number altered,
defaced or removed, or which has been connected, installed, adjusted
or repaired, other than in accordance with the instructions provided by
Snooper.
3. Should you have any difficulties with the performance of this product during
the warranty period, please call Snooper or visit our web site http://www.
snooperneo. co.uk. You may also contact Snooper Customer Services at
the address listed below for any service help you may need with Snooper
products.
4. PROOF OF DATE OF PURCHASE FROM AN AUTHORIZED SNOOPER
DEALER WILL BE REQUIRED FOR ANY WARRANTY SERVICE OF THIS
PRODUCT.
5. SNOOPER PRODUCTS PURCHASED FROM A SOURCE OTHER THAN
AN AUTHORIZED SNOOPER DEALER, INCLUDING ANY AND ALL
PURCHASES VIA THE INTERNET FROM A NON INTERNET AUTHORIZED
SNOOPER DEALER, SHALL NOT BE COVERED BY ANY SNOOPER
LIMITED WARRANTY TO THE EXTENT ALLOWED BY APPLICABLE LAW.
6. THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND
YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM EU COUNTRY
TO EU COUNTRY.
61
DVR-5HD V1.0 04/17
7. ALL IMPLIED WARRANTIES, EXCEPT TO THE EXTENT PROHIBITED BY
APPLICABLE LAW, SHALL HAVE NO GREATER DURATION THAN THE
WARRANTY PERIOD SET FORTH ABOVE. UNDER NO CIRCUMSTANCES
SHALL SNOOPER BE LIABLE FOR ANY LOSS OR DAMAGE, DIRECT
OR CONSEQUENTIAL, ARISING OUT OF THE USE OR INABILITY TO
USE THE PRODUCT. BECAUSE SOME EU COUNTRIES DO NOT ALLOW
LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS OR
EXCLUSIONS OR LIMITATIONS OF INCIDENTAL OR CONSEQUENTIAL
DAMAGES, THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY
TO YOU.
8. Product must be shipped in its original carton or equivalent carton, fully
insured, with shipping charges prepaid. Snooper will not assume any
responsibility for any loss or damage incurred in shipping.
9. The sole responsibility of Snooper under this Limited Warranty shall be
limited to the repair of the product or the replacement of the product only
(whichever is deemed appropriate and at the sole discretion of Snooper).
10. This Limited Warranty does not cover car static or other electrical
interferences, labour costs or any other associated or incidental costs
incurred for the removal or reinstallation of the unit for repair.
62
DVR-5HD V1.0 04/17
Copyright © 2016
All rights reserved.
All other marks, products or company names mentioned in this guide are
trademarks of their respective companies.
DVR-5HD V1.0 04/17
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement