Preface

Thank you for purchasing our products, this product is for the traffic accident today hard evidence of specialized research and development of a product; at the same time also meet other occasions demand, can be used in the meeting record, monitoring and evidence obtaining, location shooting, video evidence, can let you of the use of a machine, let your life more rich and colorful.

This product combines wide dynamic digital industry leading camera, no leakage of seconds, seamless

circular camera, ultra wide angle shooting, with display real-time playback, mobile detection camera, parking guardtechnology in one; streamline design of unique fashion, favored by the vast number of consumers.

This manual will detail how to install, operate, product parameter and matters needing attention. Please read carefully and please safekeepingbefore use, we hope that our products can meet your needs and long term service to you! But because the specifications may be due to upgrade, update and other reasons do change, refer to the actual product, without prior notice. The manufacturer reserves without prior notice, to change thetechnology of direct rights.

Copyright infringement/ privacy notice

Please note that this product is for personal use only, its method of useshall not commit domestic or international copyright / privacy laws. Thatimage is tot personal use only recorded, not foreign free to publish spread; in addition to using this product recorded performances, exhibitions orcommercial activities of the image may in some cases infringe copyright or the legal rights and interests.

Installation notes

This product should be installed near the rearview mirror, in order to get the best view.

To determine whether the lens in the windshield wiper range, ensure good vision, also good even in the rainy environment effect.

Don't touch the lens with the fingers, because the finger grease may remain in video or photographic lens, cause is not clear, so please clean the lensregularly.

The matters needing attention

 The use of the original factory standard charger

 That can not be privately to dismantling machine, avoid the influence of the scope of warranty

 The modified power line please find professional construction

Products accessories

Following the standard list and selecting list. If there is any missing or damaged items, please contact your dealer immediately.

Standard

Manual Bracket Car charger

Product description of structure

USB

Host keys and interface description

No.

1 MODE name Operating instructions

For video / picture / the mode button to switch between playback function;

2

3

4

5

6

7

8

9

10

11

On the turn key

Under the menu

Standby key

TF card slot

OK

Av-out interface

HDMI output

Bracket mouth

USB interface

Menu options to choose, on the function keys; standby or video mode, digitalzoom function keys;

Menu options, downward selection function keys; standby or video mode, digital

Continuous short press this key can switch each other in the settings menu;

Press this button, the screen becomes black will enter standby mode;

TF memory card slot, please install in the correct direction prompt;

Camera / camera / validation keys, camera mode short press the key to startthe camera, another short press stop camera;

Photo mode short press the key to take photos; menu mode to confirm key;

Connect the monitor through it, the recorder in recording the image transmitted directly to the display;;

HD output port, used to connect high-definition display devices ;

The recorder is suspended from the front windshield.;

Used to connect the PC data transmission; the power supply interface, provide working power supply;

12 Keyswitchmachine Long press the on / off; short press the on / off screen

13 Horn Voice broadcast;

14 Infrared light

15 microphone

16 reset button

In the case of the lighting is not ideal, can choose to open

The tape receiving port;

System restart reset button;

Recorder Installed

1, insert a memory card: please follow the device memory card gap suggeststhe right direction insert a memory card, press the memory card until thecracking of a, is inserted in place so far.

The recorder video storage of high speed card, pay attention to the memory card must be high speed card

(above CLASS6).

Note: the new card used for the first time on the card format, please use this machine.

2, remove the memory card: according to the memory cardslot, pop.

Note: the equipment in the boot state, do not remove or insert the memory card, so as not to damage the memory card.

3, the installation in the vehicle rearview mirror in front of the windshield.

To determine the 3M adhesive buckle installation location specific, tear offsticker and put it firmly pasted on the windscreen on the.

The product host behind holes at the 3M adhesive buckle claws, the downward force will be fixed on the buckle machine.

4, connect the power supply

The first scene product has the unique design and power supplyprinciple, we provide two kinds of feasible scheme for consumers:

1 if the need to connect the DVD vehicle navigation equipment, can get the power from the car ACC circuit through a dedicated step-down video line, and the AV interface and navigation video interface connection. This way of use need professional construction personnel to operate, non professionalsdo not unauthorized modification, Install wiring way suggested reference.

Note: the wiring can be car charger to extend the line along the top of the windshield of the car decorative plate hidden installation, as shown in the picture above.

5, equlpment on / off

The automatic on / off: automobile engine once launched, the deviceautomatically boot. Equipment in the boot, that is to start the automaticcamera

Once the car flameout, the device will automatically save the record and in 15 seconds to turn off the power.

The manual on / off: manual boot, then long press host button, shutdownis also host key long press.

Initial logger settings

Set the date and time:

1、because the machine has switched the camera's automatic functions, you need to press the OK button click, the device enters the standby state.

2、and then press the M button twice, by pressing , or to select the date / time, then press the OK button to enter the setting

3 、 or by pressing the buttons to adjust the value, press the OK button to enter another field. Until the completion date and time settings, press M exit.

Recorder Recording Operations

1, when the car engine is started, the device is automatically turned on and start recording. When the engine stalled, then it will automatically stop recording. Or press the OK button. Way manually stop recording.

Note: Some vehicles powered car charger interface is often when the engine stalled, the power supply will continue to work. If you encounter such a situation, take the following steps: Open the manual way off / off the device, or the car charger from a car cigarette lighter port unplugged.

2. Other types of camera: Press the OK button, then start recording ; press the OK button again, then stop recording.

Note: (1) every 3,5,10minute video, it will save time, please refer to the circulation camera menu.

(2) The equipment will be saved in the camera memory card, if a memory card is full, the oldest file is automatically overwritten memory card.

(3) emergency or for gravity sensing camera, video can not be automatically overwritten, you need to manually delete.

3、Emergency camera

Note: If you start a gravity sensor, and detects a collision, the device will automatically lock the current record video will not be overwritten.

Recorder camera operator

1. Press the key to switch to the camera mode, camera icon in the upper left corner of the screen display.

2. Press the OK button to take pictures, take pictures of the screen flashes once to indicate camera complete.

Video / photo playback operations

1, as in the camera mode, you need to press the OK button to stop recording.

2. Press the key to switch to the playback mode, the upper left corner of the screen to display the playback iron.

3. Press key up or down to select the file.

4. Press the OK button to play the selected video file ; short press again to pause playback.

Menu setting operation

1, if you are recording, need to press the OK button to stop recording.

2. Short press once to M ring up the setup menu, twice on the menu page.

3, by a short press or key, you can cycle up and down to select items in each set.

4. Select the settings you want to change, press the OK button to enter the changes through short.

5. After setting short key M to exit standby mode.

Special features:

1, gravity sensor function

When the gravity acceleration starts, the machine will automatically save the video when the accident occurred was not delete the file.

Gravity sensor can be adjusted in the menu high - medium - low, medium factory default.

2, file locking feature

The imaging process, the key is pressed, the machine will not delete the current video is saved as a file.

3, parking guard function

1) parking guards opened, when the vehicle stalled, tachograph into the automatic shutdown procedures, body if you receive external vibration generated by the tachograph will open the camera, automatically shut down after a record 10-15 seconds ; when the body is detected again after the shock, again start camera function.

2) Parking for guarding video camera 1080P 30 frames / sec, and the file is automatically locked.

Note: The parking guard function must only work in the case of tachograph automatic shutdown, manual startup or shutdown, the parking guard does not work.

4, motion detection function;

If the motion detection after a short press OK to start recording 10 seconds after the camera automatically switches to standby mode motion detection, motion detection standby mode, the upper left corner of the screen there is a flashing yellow dots, when an object is detected when moving, the recorder start recording, the yellow flashing light spot becomes red spot ; motion detection start time of 10-30 seconds after the end of the motion detection motion detection machine automatically enters standby mode, the upper left corner of the screen to switch to the yellow dot flashes; when once again detects moving objects, the camera function starts again!

When the G-sensor gravity sensor starts, the key icon will appear on the screen indicates the current video is locked video ;

5, USB mode

The USB line is connected to the computer, the recorder will automatically pop up the USB menu, there will be the following options:

1) disk

Access in this mode can be video or photo file.

2) camera

Select this mode will bring up the USB video equipment, may carry on the real-time web photo or video chat, the use of a PC computer camera.

6、Battery instructions

Battery indicator, please refer to the:

Sufficient power A low power Low battery The electricity shortage

In the on vehicle power supply, red charging indicator exhibit of lanterns in the process of charging is lit, the charging time is about 180 minutes, the redcharge indicator exhibit of lanterns off automatically after charging.

Note: This equipment is to follow the vehicle driving state long time working, the built-in battery only for parking off to save the file and design, solidbattery operating time length is limited, please link vehicle power in daily use.

7、RESET

If in the use process, the machine is abnormal or crash situation, through theneedle fine through the holes touch shell press the RESET key to machinesystem reset operation.

Display interface icons

1 ： Camera icon indicates camera mode ；

： Camera icon indicates camera mode ；

： Playback icon, indicating the playback mode；

2 standby

Flashing red indicates that the device in the camera work ; yellow dot blinking motion detection device in

3 ： Gravity sensor icon

After opening the gravity sensing this icon will be displayed on the screen ; indicates the recording process, when the external shock exceeds the set value, the current camera video will be locked, deleted files can not be saved as a non- covering

Lock icon is displayed when the video ;

4: ： Night vision icon; Short press the power switch, open and close lamp, or in the menu Settings. Open the lamp, the screen shows the figure

5、 ： lock icon is displayed when the video；

When the G-sensor gravity sensor starts, the key icon will appear on the screen indicates the current video is locked video ;

6、 : Recording function Open icon: Recording function close icon

Open the Settings menu and synchronized recording function on or off this icon appears, indicating the current recording function on or off ; camera during the short press the Menu key, you can quickly open and close the record

7、00:00:00 White font - memory cards remaining recording time / red font - current segment recording time ;

After inserting a memory card, the camera displays standby time remaining space of the memory card, display white font ; imaging process, the camera displays the current time- segmented, red font ;

8、1080FHD: Video resolution icons ; display the currently selected video resolution ;

9、 Parking guard icon ; display icons for parking guard function turned on

10、 Battery level icon ; shows the current charge ;

11、22：16：49 Time display shows the current standard time ; before using it for initial setup ;

12、2014/01/01 ：Date display, showing the current standard dates before using it for initial setup ;

13、 ： Motion detection icon ; the left side of the screen to display the icon, indicating that the feature is activated.

14、 ： EV exposure compensation icon indicates the currently selected exposure parameters ;

15、 ： Wide dynamic icon on the left side of the screen to display the icon, indicating that the feature is activated.

Recommendations often open.

16、 ： Cycle time imaging segment icon representing the cycle time of one minute imaging ;

Menu options are:3-5-10-Off

Settings Menu

Options

Resolution

Explanation

Set the video resolution

Available options

1080FHD、720P、VGA

Loop recording

WDR

Exposure

Compensation

Motion Detection

Sound recording

Date Label

Gravity sensor

Date / Time

Beep

Language Settings

When setting up each video file length

3minute, 5 minutes, 10minutes, turn off, ; if you choose to close the case, the card will not automatically cycle full coverage.

Wide Dynamic automatic adjustment of light On, Off, the proposed full-time open

Underexposed, dim the screen, you need to fill +0.0、-1/3、-2/3、-10、-4/3、-5/3、-2.0、+2.0、+5/3、+4/3、 light +10+2/3、+1/3

In standby mode, when the screen has moved to the detection of automatic video

On, Off

On, Off

Camera video watermark date

Collision generated video never be covered

Date and Time

During operation, the key is with sound

Language operating menu

On, Off

High, medium, low, off

You can set the year, month, day, hour, minute, second

On, Off

Traditional, Simplified Chinese, Russian, Japanese,

French, Italian, German, Spanish, English, Korean

Light frequency Lights flicker frequency

Automatic shutdown No automatic shutdown operating state

Night Lights

Parking guard

License Plate

50HZ. 60HZ,

1minute, 3minutes, 5minutes, off

Fill light in the dark state by [R On, Off

After parking stall, body if you receive external vibration generated by the tachograph will open On, Off camera

You can delete memory card data above A00000

Format

The default setting

Screen Saver

Version

Restore factory settings

SD

Cancel, OK

Recorder automatically turns off the display work On, Off

Software version shipped software version number

Product Specifications:

Product Name live HD tachograph

Product Features

G-sensor

LCD screen size

Division date Support

Extremely wide angle of 170 degrees,1080P Full HD Vector Media

Built in memory (total amount:

1024MB)

Built-in ( under the car accident case of emergency save, not to

Camera mode 1200M be deleted)

3.0 inch high definition LCD screen Photo format JPEG

Shot

Language

File Format

Video Resolution video format

Color effects

A + grade high-resolution 170-degree ultra- wide-angle lens Memory Card TF ( maximum support64GB)

Russian, English, Chinese Chinese( Traditional ), Korean,

Microphone Support

Japanese, etc.

MOV

1920*1080P 1280*720P

H. 264, Audio: AAC

Built-in stereo Support

IR Support

Standard

Video Format PAL/NTSC

Current

Frequency

50HZ/60HZ

Continuous loop recording Seamless loop recording, no leakage seconds

Truck switch

Motion detection

Support auto ignition on, turn off

Support

USB

1: USB-Disk

2: PC-Camera

Power supply

5V 1A interface

Battery Batt-in300mAh

Troubleshooting

Under normal operating conditions, such as abnormal products, please refer to the solution:

Unable to boot:

Check the recorder and car charger connected correctly, if you manually turned on, check the battery level is too low needs recharging As a result of procedural questions by pressing the RESET Reset button to restore to factory settings.

When the camera automatically stops recording, or do not cycle the camera:

Due to the huge high-definition video data, it is possible because the memory card reader could not keep pace Please use the high-speed TF card, such as C10 high speed card.

Not cycle the camera is also possible that gravity sensor opens, the memory card are all locked files causing. Please gravity sensor is closed, and the memory card is formatted.

Each time the camera and set the cycle is not the same:

Check to see if motion detection function, because the camera motion detection state length of time, depending on the screen there is no movement.

Shoot the movie is not clear:

Please check whether the stolen camera, finger print. Please clean the lens before shooting the surface, keep the lens clean.

Sometimes when the effect of the film shoot bad thing:

Camera effects and lighting conditions to shoot a great relationship, such as backlighting, shun the light, the intensity of light, and this will result in different shooting out of the video.

Images have streaks interference:

This is due to the wrong setting " light frequency" produced under the fluorescent lights, the domestic flat rate "50HZ".

When the machine

When the machine briefly press the "RESET" the reset button to restore restart.