Ringway Tech(Jiangsu) OCDHD-10 ELECTRONICDRUM User Manual

Add to my manuals
45 Pages

advertisement

Ringway Tech(Jiangsu) OCDHD-10 ELECTRONICDRUM User Manual | Manualzz

HD-10

Owner s Manual

V irgin

M usical

I nstruments

Precaution

Thank you for purchasing this electronic instrument.For perfect operation and security, please read the manual carefully and keep it for future reference.

Safety Precautions

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage”within the product s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance(servicing) instructions in the literature accompanying the product.

Important Safety Instructions

1) Read these instructions.

2) Keep these instructions.

3) Heed all warnings.

4) Follow all instructions.

5) Do not use this apparatus near water.

(Figure 1)

6) Clean only with dry cloth.

7) Do not block any ventilation openings, install in accordance with the manufacturer s instructions.

8) Do not install near the heat sources such as radiators, heat registers, stoves, or other apparatus

(including amplifiers) that produce heat.

9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarizedplug hase two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety, if the provided plug does not fit into your outlet. consult an electrician for replacement of the obsolete outlet.

10) Protect the power cord from being walked on or pinched particularly at plugs. convenience receptacles, and the point where they exit from the apparatus.

11) Only use attachments/accessories specified by the manufacturer.

12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over(Figure 1).

13) Unplug this apparatus during lightning storms or when unused for a long periods fo time.

14) Refer all servicing to qualified service personnel.

Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.

CAUTION: Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus.

FCC STATEMENT

1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference.

(2) This device must accept any interference received, including interference that may cause undesired operation.

2. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

Contents

Assembly Instruction............................................................................................

2

Panel Controls .....................................................................................................

5

Connect..................................................................................................................

9

Connecting the Power Supply...........................................................................

9

Connecting an Amplifier.....................................................................................

9

Connecting a CD Player, etc.(AUX In jack).......................................................

9

USB MIDI.........................................................................................................

10

Using Headphones...........................................................................................

10

Begin Playing the Drums .....................................................................................

11

Switch the Power On .......................................................................................

11

Select Drum Kits .............................................................................................

12

ENTER Button .................................................................................................

12

BACK Button ...................................................................................................

12

Select Kit Edit ..................................................................................................

13

SETUP Button .................................................................................................

17

SONG Button ..................................................................................................

21

CLICK Button ..................................................................................................

24

TEMPO/TAP Button .........................................................................................

26

Recording Function .........................................................................................

27

Factory Reset .......................................................................................................

29

Drum Kits List .......................................................................................................

30

Voice List ..............................................................................................................

31

Style List ...............................................................................................................

35

MIDI Implementation Chart...................................................................................

36

Specifications .......................................................................................................

37

1

Assembly Instruction

1

Attach the cymbal arms to the drum frame indicated positions

2

Attach the cymbals to the cymbal arms as shown.

3

Align the holes in Snare Drum Pad and the three

Tom Drum Pads and insert into the pole on the

Drum Frame as shown.

2

Assembly Instruction

4

Attach the Drum Pads in the positions shown below.

5

Insert the rod of sound module stand into the

Drum Frame clamp as shown, then tighten.

6

Hi-hat control pedal

Kick pedal

Please put Hi-hat control pedal on the left and Kick pedal on the right.

3

Assembly Instruction

TO CRASH

TO RIDE

TO HH

TO TOM1

TO TOM2

TO SNARE

TO TOM3

TO HHC

TO KICK

Hi-hat

Crash

Ride

Tom1

Tom2

Tom3

Snare

Hi-hat

Control

Kick

Hi-Hat Foot Controller

---It can produce hi-hat closed sound if you hit hi-hat when pressing foot controller.

---It can produce hi-hat open sound if you hit hi-hat without pressing foot controller.

---Press foot controller directly to produce hi-hat pedal sound.

---The hi-hat tone changes smoothly from open to closed in response to press the pedal

while hitting the hi-hat.

---Press the latter part of the pedal quickly and release the pedal immediately to produce

splash sound.

Cross Stick

Only strike the rim of the snare pad to produce stick sound.

4

Panel Controls

Top Panel

CLICK TEMPO/TAP

RECORD PLAY/STOP

KIT SONG DRUM OFF

CRASH

TOM1 TOM2

HD-10

SETUP ENTER

COUNT BACK

RIDE

RIM

HI-HAT

HI-HAT

CONTROL

SNARE KICK

TOM3

Drums selection

Rear Panel

POWER ON/OFF V DC 9 ST O HO B T US ES ON PH R T E OU O LIN ON L/M X IN AU

5

Panel Controls

1. MASTER VOLUME Adjust the overall volume of the drum module with this pot. It controls the line

outputs and the headphone output.

2.[CLICK] BUTTON This button turns the metronome on and off at any time, except from within the top

level of Click Edit mode.

3.[TEMPO/TAP] BUTTON You can adjust the tempo of the built-in metronome, the practice songs, or the song

you are recording by pressing

[Tempo/Tap]

. You can also set the tempo by hitting

the drum pads.

4.[RECORD] BUTTON Gives you the option to record your own song.

5.[PLAY/STOP] BUTTON Star or stop playing song and recording, Press button of drums selection to star auditi

on function.

6.[KIT] BUTTON

Kit Edit

mode enables you to select which instrument (drum sound) is played by

each pad and adjust its volume or effects settings, etc.

7.[SONG] BUTTON Press this button to play the song and also lets you adjust the relative volumes of the

drum and accompaniment tracks.

8.[DRUM OFF] BUTTON Turn on or off the sound of the drum in a song.

9.[+/- ] BUTTONS Use these buttons to navigate through the 50 drum kits, switch menu selections, or

change parameter values. Pressing them both at once will reset the value of the

current parameter to its default.

10.[SETUP] BUTTON

Press [Setup] to access parameters that affect all of the kit presets in the drum

module equally, such as the sensitivity, threshold, and velocity curve for each pad.

11.[ENTER] BUTTON This button will confirm and save the parameter changes you have made. It is also

used to access the sub-pages of each menu.

12.[COUNT] BUTTON Count the number of hitting drums in the certain period.

13.[BACK] BUTTON Pressing this button takes the drum module to the previous menu. From the highest

Edit menu it will exit to the Kit Select menu, except in Song mode where it will exit

to the Song Select menu.

14.DRUMS SELECTION Corresponding button of the drum pads, include: HI-HAT, CRASH, TOM1, TOM2,

TOM3, RIDE, RIM, HI-HAT CONTROL, SNARE, KICK.

6

Panel Controls

Rear Panel

14. USB Connect to a computer for two-way MIDI communication. This

will enable a software program to trigger the drum module sounds,

or allow you to use the module as a MIDI trigger interface for the

15. S erial connection Jack Each pad should be connected to the corresponding trigger input for the pad trigger cables jack on the sound module.

16. POWER ON/OFF After connecting the included DC adapter, use this switch to turn

the power on or off.

17. DC 9V This jack is intended for use with the included DC adapter only.

18. PHONES Plug in a pair of stereo headphones here.

19. LINE OUT (R and L) Stereo audio outputs to connect to external audio sources.

20. AUX IN Connect the output of an external audio device such as iPod, CD

player, etc.

7

Panel Controls

The Display

1

Mode

Parameter/Value

K i t S e l e c t

K i t E d i t

S e t u p

C l i c k

Te m p o S o n g

4 5 6 7 8 9

2

3

1. Mode This section indicates which mode you are in depending on

which of the three options is lit (Kit Select, Kit Edit, or Setup).

2. Parameter/Value The four large characters in the display tell you the name of the

page you have selected or the value of the current parameter.

There are several methods for changing the value or page

depending on what is being shown. See the related sections of

this manual for details.

3.“Edited” indicator The dot to the right of the kit number lets you know when the

stored drum kit has been edited in some way.

4. Click This icon will light when the metronome is active.

5. Tempo When this word is lit, the Value being shown is the tempo of

the metronome or the current song. You may adjust the tempo

using the -/+ buttons or by tapping the Tempo/Tap button.

mode.

7. Metronome indicator This icon will flash while the click is active, or while recording

or playing a song. When the outer edges of the icon are lit , that 's

the downbeat of the bar. When only the Center dot is lit, that is

one of the sub-beats of the current time signature.

8. Playing Song When the triangle is lit you will know that a song is playing

back, not recording.

9. Recording Song The large dot indicates that a song is currently being recorded.

Anything played on the pads will be captured for later playback.

8

Connect

Connecting the Power Supply

Make sure the power is switch OFF and connect the power adaptor to the “DC 9V”jack on the rear panel.

AC POWER

Connecting an Amplifier

When you want to listen to the voices with an amplifier, connect amplifiers to the LINE OUT jack on the rear panel. The volume is adjusted with the MASTER VOLUME knob.

AMPLIFIER

Connecting a CD Player, etc. (AUX In jack)

The audio output from a CD player connected to the AUX IN jack on the rear panel can be mixed with the sound of the drum brain. This function is convenient when you want to play along with a favourite song.

The volume of the external signal is adjusted with the MASTER VOLUME knob.

i

Pad

9

Connect

USB MIDI

Your drum module is USB class-compliant. This means you can plug it into a USB class-compliant host (for example, a computer running OS X, Windows XP, Vista or

Windows 7) and it should be recognized immediately. There are no drivers to install; simply plug n' play. If you connect the drum module to a computer, you can trigger drum libraries on the computer or record your performance into a MIDI sequencing application. Check the operation and setup instructions for the software you intend to use for more details.

Using Headphones

An optional set of stereo headphones can be connected to the

PHONES jack located to the left side of the unit. Use the

[MASTER VOLUME] to adjust the headphone volume.

PHONES

Note: Never use headphones in high volume, as it may hurt your ears.

10

Begin Playing the Drums

Switch the Power On

With everything set up and ready to go, it's time to start playing the drum kit. Locate the on/off power switch on the drum module and switch the power on. The drum module is ready to operate when the display shown below appears. This is the location from which you select the drum kit you want to play or edit.

Mode

Parameter/Value

K i t S e l e c t

K i t E d i t

S e t u p

C l i c k

Te m p o S o n g

Next, connect headphones or a speaker system as described on the previous two pages. Start with the MASTER VOLUME set to MIN and press the [Start/Stop] button on the drum module. Gradually increase the volume until you hear a song playing through your speaker system or headphones. If you hear no sound, please check all of the cables connecting the drum module to your speakers and repeat the procedure. When the levels are set to a comfortable level, press the [Start/Stop] button again to stop the song.

Once you have established that your sound system or headphones are connected correctly to the drum module, play each of the pads, cymbals, and kick and hi-hat pedals. You should hear a sound for every hit. If one pad or cymbal does not play a sound, check the cable connection from that pad to the sound module.

you are ready to learn more about your new drum system, pick up the manual again and continue with the next page.

11

Begin Playing the Drums

Selecting Drum Kits

Ready to explore the sound module some more? Then let's cover the rest of the features.

The unit comes with 45 preset drum kits, any of which may be edited to suit your tastes. If get there. You will see the number of the current kit appear in the LCD display along with the letter

“ ”

(for

Kit

). The display should look something like the image pictured below.

You can use the [-/+] buttons to step through any of the 50 kits. For a complete list of the preset kits, please see page 30 of this manual.

ENTER

BACK

Mode Parameter/Value

K i t S e l e c t

K i t E d i t

S e t u p

C l i c k

Te m p o S o n g

[ENTER] button

Think of the [Enter] button as similar to the Enter or Return key on a computer. It has two main functions:

· To take the unit down another menu level

in one of the modes (Kit Edit, Setup, and

Song)

· To confirm and save the new value or

function of an edited parameter.

ENTER

BACK

Once the selection has been confirmed, the display will return to the previous menu.

[BACK] button

Press the [Back] button if you want to quit the current menu.

Once pressed the LCD display will take you back to the previous menu.

12

ENTER

BACK

Begin Playing the Drums

Selecting Kit Edit

In kit mode press the [ENTER] button, the LCD will display “ INST

” (Instrument), now, you can use the [+/-] buttons to select “VOL”(Pad Volume), “RVRB”(Reverb Level),

“CHRS”(Chrous Level),“PAN”(Pan),“PICH”(Pitch),“DCAY”(Decay),“COPY”

(Copy), and “RSET”(Reset).

ENTER

Mode

Parameter/Value

K i t S e l e c t

K i t E d i t

S e t u p

C l i c k

Te m p o S o n g

A. Selecting an Instrument (INST)

In kit model press the [ENTER] button : the LCD will display “INST”

1. Press [ ENTER ] button again.

a. Through the following button to select the desired pad.

CRASH RIDE

TOM1 TOM2

RIM

TOM3

HI-HAT

HI-HAT

CONTROL

SNARE

b . Hit the drum that you want to set.

KICK

For example: to select snare voice

1. Press [ ENTER ] button, the LCD will display

INST

.

2. Press [ ENTER ] button again, use the [SNARE] button or hit the snare pad forcefully to

select the voice, the LCD will display

2001

3.

Use the [-/+] buttons to select new snare voice.

Press the corresponding button of the drums to audition.

4. Press [ENTER] button to confirm or press [BACK] button to return.

13

Begin Playing the Drums

B.

Pad Volume (VOL)

In kit mode press the [ENTER] button : the LCD will display “INST”

1. Use the [-/+] buttons to select“VOL”.

2. Press [ENTER] button again.

a. Through the following button to select the desired pad.

CRASH RIDE

TOM1 TOM2

RIM

TOM3

HI-HAT

HI-HAT

CONTROL

SNARE

b . Hit the drum that you want to set.

KICK

For example: to select snare voice

1. Press [ ENTER ] button, the LCD will display

INST

.

2. Use the [-/+] buttons to select the “LEVL” menu .

3. Press [ ENTER ] button again, use the [SNARE] button or hit the snare pad forcefully to

select the voice.

4.

Use the [-/+] buttons to select new snare voice.

Press the corresponding button of the drums to audition.

5. Press [ENTER] button to confirm or press [BACK] button to return.

C. Reverb level (RVRB)

In kit mode press the [ENTER] button : the LCD will display “INST”.

Use the [-/+] buttons to select the “RVRB”

Press [ Enter ] button again, use the pad buttons to select a pad (For example: SNARE).

U se the [-/+] buttons to set a value( Range: 000-127 ) .

Press [Enter] button to confirm or press [Back] button to return.

D. Chorus level (CHRS)

In the k mode, press the [ Enter ] button, use the [+/-] buttons to select“CHRS”

Press [ Enter ] button, use the pad buttons to select a pad (For example: SNARE).

U se the [-/+] buttons to set a value( Range: 000-127 ) .

Press [Enter] button to confirm or press [Back] button to return.

14

Begin Playing the Drums

E. Pan (PAN)

In the k mode, press the [ Enter ] button, use the [+/-] buttons to select“PAN”

Press [ Enter ] button, use the pad buttons to select a pad (For example: SNARE).

U se the [-/+] buttons to set a value( Range: 000~016 ) .

Press [Enter] button to confirm or press [Back] button to return.

F. Pitch (PICH)

In the k mode, press the [ Enter ] button, use the [+/-] buttons to select“PICH”

Press [ Enter ] button, use the pad buttons to select a pad (For example: SNARE).

U se the [-/+] buttons to set a value( Range: -008~008 ) .

Press [Enter] button to confirm or press [Back] button to return.

G. Decay (DCAY)

In the k mode, press the [ Enter ] button, use the [+/-] buttons to select“DCAY”

Press [ Enter ] button, use the pad buttons to select a pad (For example: SNARE).

U se the [-/+] buttons to set a value( Range: -005~000 ) .

Press [Enter] button to confirm or press [Back] button to return.

H. Copy Drum Kit to New Location (COPY)

Any drum kit can be copied from any one of the 45 kit locations. This is handy if you want to change the order in which the kits appear for a live performance, for example.

To copy the current drum kit to another location:

1. it Enter ] button, use the [+/-] buttons to select“COPY”.

2. Press [Enter] button and use the [-/+] buttons to select one of the drum kit numbers as the

destination. The display will flash the number of the targeted kit(USE1~USE5).

Note: the next step will overwrite the destination kit. Be sure you have chosen the right one before you proceed!

Press [Enter] button to confirm the destination kit to be overwritten or press [Back] button to exit the Copy function without making any changes.

If you pressed [Enter] to execute the Copy function in the previous step, the display will flash

END

and exit to the Kit Select page with the new location selected.

15

Begin Playing the Drums

I. Resetting the Drum Kit(RSET)

If you have made changes to the current drum kit and decide you want to get back to the factory starting point, we 've provided a way to do this.

The procedure has been divided into two parts: resetting the instrument/pad assignments and

1. it Enter ] button, use the [+/-] buttons to select“RSET”.

2. Press [Enter] button, and use the [+/-] buttons to select“CURT” or “ALL” .

3. Press [Enter] button again, the display will flash “END” and return to the previous menu.

“CURT”-----Reset current drum

“ALL”-----Reset all drums

16

Begin Playing the Drums

[SETUP] Button

In this mode, you can set the Pad Trigger, Effects, Local On/Off, Channel selection,

Power On/Off and Resetting functions.

A. Trigger Setting

The trigger functions allow you to adapt how the drum module responds to your playing style.

Adjustable parameters include sensitivity, threshold, velocity curve and crosstalk.

We will explain each function in detail, but first, let's go through the basic process of changing these parameters.

For example, if you would like to adjust the trigger settings for the snare drum pad:

1. Press the [Setup] button: the display will display

“TRIG”

3. Press [Enter] button and use the [-/+] buttons to select one of the options (CANC, THRS,

CURV and XTLK).

Mode Parameter/Value

SETUP

K i t S e l e c t

K i t E d i t

S e t u p

C l i c k

Te m p o S o n g

4. Press [Enter] button and through the following button to select the desired pad.

CRASH RIDE

TOM1 TOM2

RIM

TOM3

HI-HAT

HI-HAT

CONTROL

SNARE KICK

5. Use the [-/+] buttons to select a new value.

6. Press [Enter] button to confirm the choice or press [Back] button to retain the original value.

Note: the Open and Closed hi-hat triggers share the same set of trigger parameters, so you will see the same label in the display for both.

The Snare and Snare Rim triggers share the same set of CANC parameters, but their THRS,

CURV and XTLK parameters are independent.

17

Begin Playing the Drums

CANS Sensitivity: Simply put, set this to as high a value as you can. The lower the value, the

less sensitive the pad will be. If you find the pad overly sensitive, including the

unexpected triggering of the pad you are playing, try reducing the sensitivity of the

pad a little. Range: 001-008

THRS Threshold: This setting allows a trigger signal to be received only when you hit the

pad above a certain force level. This can be used to prevent a pad from sounding

because of vibrations from other pads. When set to a higher value, no sound is

produced when you strike the pad lightly. Range: 000-050

CURV Velocity Curve: This allows you to choose a curve for each pad so it responds the way

you want. There are four velocity curves from which to choose: Normal (NORL),

Dynamic (DYN), EASY, and Fixed (FID).

EASY As the name implies, this curve makes it relatively easy to reach the maximum

MIDI velocity of 127. So as a general rule, lower velocity hits are more likely

to produce a louder volume.

NORL Allows an evenly-distributed change in output in response to changes in velocity.

DYN This setting provides the widest dynamic range overall. As a result it is possible

to play more quietly, easier to produce a more subtle change in volume, and

requires slightly more forceful playing to reach the maximum MIDI velocity

of 127.

FID No matter how hard or soft you hit the pad, the engine will always receive a

MIDI velocity of 100.

XTLK Crosstalk can happen when you strike one of the pads forcefully, causing one of the

other instruments in the kit to be triggered unintentionally. When you have noticed

that one trigger pad is picking up signals from the other pads, adjust the XTAL

setting for the affected pad to a higher value until it stops receiving trigger events

from the pads that are causing the problem. Range: 000-080

Note: the hi-hat foot trigger (HH-P) does not offer adjustments for SENS, THRS, or XTAL.

HH-S does not offer adjustments for THRS or XTAL. You will see the word "NULL" when you select those parameters for those instruments. You can adjust their velocity curves, however.

18

Begin Playing the Drums

B. Defeating the Effects for All Drum Kits (EFCT)

We have added reverb effects to many of the drum kits. However, it's possible you might want to turn off the reverb for all of the drum kits and process the audio with an external effects unit. To do this:

1. Press the [Setup] button: the LCD will display“TRIG”

2. Use the [-/+] buttons to select the“ EFCT” menu.

SETUP

Mode

Parameter/Value

K i t S e l e c t

K i t E d i t

S e t u p

C l i c k

Te m p o S o n g

3. Press [Enter] button and use the [-/+] buttons to select the “REVB” or “CHRS”

4. Press [Enter] and use the [-/+] buttons to select one of the following options:

REVB: “OFF”“ HAL1”“ HAL2”“ROM1”“ROM2”“ ROM3”“ STG1”

“ STG2”“ PLAT”“ DLAY”“ECHO”.

CHRS: “OFF”“CHR1”“CHR2”“CHR3”“CHR4”“FDBK”“FLG1”

“SDLY”“SDFB”“FLG2”“FLG3”“CLS1”“CHR2”“CHR3”

5. Press [Enter] button again to confirm your choice or press [Back] button to exit to the previous

menu without having changed anything.

C. Using the Drum Pads as MIDI Triggers Only (LOCL)

You might want to use the pads to trigger another sound source over USB but not hear the drum module's internal sounds at the same time. This condition is known as "Local Off." It can also be useful if you are triggering the drum module's sounds via USB MIDI and want to eliminate any double triggering.

To configure the drum module in this way, do the following:

1. Press the [Setup] button: the LCD will display

“TRIG”

2. Use the [-/+] buttons to select the “LOCL” menu.

3. Press [Enter] and use the [-/+] buttons to select either “Off” or “On” depending on

what you want to do. “On” is the normal operating mode: when you play the pads the

internal sounds will trigger. “Off” will not trigger the internal sounds directly.

4. Press [Enter] to confirm the choice, or press [Back] to exit without making any changes.

SETUP

Mode Parameter/Value

K i t S e l e c t

K i t E d i t

S e t u p

C l i c k

Te m p o S o n g

19

Begin Playing the Drums

D. (CHAN)

Select MIDI output channel(01-16)

1. Press the [Setup] button: the LCD will display

“TRIG”

2. Use the [-/+] buttons to select the “CHAN” menu.

3. Press [Enter] and use the [-/+] buttons to select 001-016 and OFF.

4. Press [Enter] to confirm the choice, or press [Back] to exit without making any changes.

SETUP

Mode Parameter/Value

K i t S e l e c t

K i t E d i t

S e t u p

C l i c k

Te m p o S o n g

E. Auto Power Off

Press the [SETUP] button and use the [+/-] button to select “POWR”, then press [ENTER] button, use [+/-] button to select “ON” or “OFF”.

Press the [ENTER] button to confirm.

“ON” Mode: When the “

Auto Power O ff

”function is on and there is no operation within

thirty minutes, the drum will auto power off.

“OFF” Mode: Turns the “

Auto Power O ff ” function off.

SETUP

Mode Parameter/Value

K i t S e l e c t

K i t E d i t

S e t u p

C l i c k

Te m p o S o n g

20

Begin Playing the Drums

F. Restoring All Trigger Settings to the Factory Defaults (RSET

)

If you have set up your drum kit in a new location, such as on a stage with a drum riser, you may find that you need to readjust your trigger crosstalk settings, for example. If you would prefer to start over from the factory trigger settings, follow this procedure:

1. Press the [Setup] button: the LCD will display “TRIG”.

2. Use the [-/+] buttons to select the “RSET” menu.

3. Press [Enter] button and use the [-/+] buttons to select “TRIG”or“ALL”.

4.Press [Enter] button again, the display will flash “END” and the settings will have been

restored to their factory defaults.

“TRIG”-----Reset “TRIG” in “SETUP”

“ALL”-----Reset all the setting in “SETUP”

SETUP

Mode Parameter/Value

K i t S e l e c t

K i t E d i t

S e t u p

C l i c k

Te m p o S o n g

21

Begin Playing the Drums

[SONG] Button

Your drum provides 50 (001-050) preset songs, and 2 (DEM1/DEM2) song demos.

Song Selection

1. Press the [SONG] button. The display will show the number of the last song selected.

3. Press the [PLAY/STOP] button to start or stop the song.

SONG

Mode Parameter/Value

K i t S e l e c t

K i t E d i t

S e t u p

C l i c k

Te m p o S o n g

A. Drum Part Volume (DVOL)

along with the songs, here is how to do that:

1. Press the [Song] button the the LCD will display “S001”

2. Press [Enter] and use the [-/+] buttons to select the “DVOL” menu

3. Press [Enter] and use the [-/+] buttons to adjust the volume up or down. Press both [–] and

[+] at the same time to reset the drum part volume to the default value of 028. Range: 000-032

4. Press [Enter] to confirm the new value. The change is not permanent, though; the value will

be returned to the default value of

028

” on power-down.

Note: The drum part volume setting of 000 will silence the drum parts, but a quicker way to do that is to use the Drum On/Off feature described on the previous page.

ENTER

Mode Parameter/Value

K i t S e l e c t

K i t E d i t

S e t u p

C l i c k

Te m p o S o n g

22

Begin Playing the Drums

B. Accompaniment Part Volume (ACCV)

listening to or playing along with the songs, here is what to do:

1. Press the [Song] button the the LCD will display “S001”

2. Press [Enter] button and use the [-/+] buttons to select the “ACCV” menu

3. Press [Enter] button and use the [-/+] buttons to adjust the volume up or down. Press both

[-] and [+] at the same time to reset the accompaniment part volume to the default value of

028. Range: 000-032

4. Press [Enter] button to confirm the new value.

ENTER

Mode Parameter/Value

K i t S e l e c t

K i t E d i t

S e t u p

C l i c k

Te m p o S o n g

C. (LINK)

1. Press the [Song] button the the LCD will display “S001”

2. Press [Enter] button and use the [-/+] buttons to select the “LINK” menu

3. Press [Enter] button and use the [-/+] buttons to select “ON”or“OFF”.

4. Press [Enter] button to confirm the new value.

“ON”-----Kit will be automatically jumped to the corresponding kit set when you select the

tempo.

ENTER

Mode Parameter/Value

K i t S e l e c t

K i t E d i t

S e t u p

C l i c k

Te m p o S o n g

23

Begin Playing the Drums

D. Reset All Mix Parameters (REST)

1. Press the [Song] button the the LCD will display “S001”

2. Press [Enter] button and use the [-/+] buttons to select the “RSET” menu

3. Press [Enter] to execute the procedure. The display will flash “END” indicating that

the setting of the songs have been restored.

ENTER

Mode

Parameter/Value

K i t S e l e c t

K i t E d i t

S e t u p

C l i c k

Te m p o S o n g

E. Drum On/Off (DRUM OFF)

If you would like to play along to these songs without listening to the pre-recorded drum and percussion parts, here is the method for disabling those parts:

If you want to mute the pre-recorded drums, press [DRUM OFF] button and the light will be lighted.

Note: The value will be returned to

On

” on power-down.

DRUM OFF

24

Begin Playing the Drums

[CLICK] Button

Press [CLICK] button to turn on or turn off metronome.

Click edit

It is possible to adjust the metronome volume, change its assigned instrument, or select a different time signature. To access these parameters you will need to press [CLICK] button for two seconds. After you have done this, the following options become available to you:

A. Click Volume (LEVL)

To adjust the metronome volume, follow these steps:

1. P ress [CLICK] button for two seconds . The LCD will display “LEVL”

2. Press [Enter] and use the [-/+] buttons to adjust the click volume up or down.

Pressing both [–] and [+] at the same time will reset the click volume to the default value of

020. Range: 000-032

3. Press [Enter] to confirm the choice.

CLICK

Mode Parameter/Value

K i t S e l e c t

K i t E d i t

S e t u p

C l i c k

Te m p o S o n g

B. Changing the Time Signature (TYPE)

The metronome settings can be changed to accommodate a number of different time signatures. To change the time signature, follow these steps:

1. Press [CLICK] button for two seconds. The LCD will display “LEVL”

2. Use the [-/+] buttons to select the “TYPE” menu

3. Press [Enter] again and use the [-/+] buttons to select the new time signature. Pressing

both [–] and [+] at the same time will reset the click to the default value of 4-4.

Range: 1-4, 2-4, 3-4, 4-4, 6-4,3-8,6-8,12-8..

4. Press [Enter] to confirm the choice.

25

Begin Playing the Drums

Mode Parameter/Value

K i t S e l e c t

K i t E d i t

S e t u p

C l i c k

Te m p o S o n g

C. Selecting the Click Sound (SOND)

experiment with the options to see which one is best for you, here is what to do:

1. Press [CLICK] button for two seconds. The LCD will display “LEVL”

2. Use the [-/+] buttons to select the

SOND

menu

3. Press [Enter] button and use the [-/+] buttons to select one of the three sounds.(001-003)

4. Press [Enter] button to confirm the choice.

Mode Parameter/Value

K i t S e l e c t

K i t E d i t

S e t u p

C l i c k

Te m p o S o n g

D. Restoring Factory Click Settings (REST)

like to do this, follow this procedure:

1. Press [CLICK] button for two seconds. The LCD will display “LEVL”

2. Use the [-/+] buttons to select the “REST” menu

3. Press [Enter] button to execute the reset procedure. The display will flash

END

and

return to the “REST” menu.

Mode Parameter/Value

K i t S e l e c t

K i t E d i t

S e t u p

C l i c k

Te m p o S o n g

26

Begin Playing the Drums

[TEMPO/TAP] Button

The tempo of the click or the current song may be set by using one of several methods.

Each of these procedures is detailed in the paragraphs ahead:

A. Setting the Tempo with the [-/+] Buttons

For making precise adjustments to the tempo, use this procedure:

1. Press the [Tempo/Tap] button: the current tempo value will be shown

2. Use the [-/+] buttons to change the tempo value. Range: 020-240

Pressing both [–] and [+] at the same time will reset the tempo to the default value of 135

TEMPO/TAP

Mode Parameter/Value

K i t S e l e c t

K i t E d i t

S e t u p

C l i c k

Te m p o S o n g

B. Setting the Tempo by Tapping

You can also enter the tempo by tapping it out on the [Tempo/Tap] button or by using one of

1. Press the [Tempo/Tap] button: the current tempo value will be shown

2. Press the [Enter] button: the tempo value will flash

3. Tap on one of the pads four times. Those four taps will be used

to calculate the new tempo value. Range: 020-240

TEMPO/TAP ENTER

4

27

Begin Playing the Drums

Recording Function

Press the [RECORD] button to enter the record mode,then use the [+/-] buttons to change the menu.

RECORD

Mode Parameter/Value

K i t S e l e c t

K i t E d i t

S e t u p

C l i c k

Te m p o S o n g

A. RECD(Record)

Press the [RECORD] button t he LCD will display “RECD”, then press [ENTER] button to start recording, press [BACK] or [RECORD] button to end recording.

PLAY/STOP

Mode Parameter/Value

K i t S e l e c t

K i t E d i t

S e t u p

C l i c k

Te m p o S o n g

B. PLAY

Press the [RECORD] button t he LCD will display “RECD”, now you can p ress the

[PLAY/STOP] button or use [+/-] buttons to select

PLAY

” and press [ENTER] button to start playing the song , press [PLAY/STOP] button again to stop playing.

Mode Parameter/Value

PLAY/STOP

K i t S e l e c t

K i t E d i t

S e t u p

C l i c k

Te m p o S o n g

C. CLER(Clear)

Press the [RECORD] button t he LCD will display “RECD”, then use [+/-] buttons to select

CLER

” Press [Enter] button to confirm. The display will flash “END” and return to the

CLER

” menu.

Mode Parameter/Value

K i t S e l e c t

K i t E d i t

S e t u p

C l i c k

Te m p o S o n g

28

Begin Playing the Drums

D. RMOD

Press the [RECORD] button t he LCD will display “RECD”, Use the [+/-] button to select

“RMOD”, then press the [ENTER] button and use the [+/-] button to select“SYNC”or

“AUTM”.

SYNC ------ If you use Syn mode ,it will start recording when you start playing the instrument.

AUTM ------ Means that After four beats it will automatically start recording.

RECORD

Mode Parameter/Value

K i t S e l e c t

K i t E d i t

S e t u p

C l i c k

Te m p o S o n g

29

Begin Playing the Drums

[COUNT] Button

Count the number of hitting drums in the certain period.

1. Press the [COUNT] button, the LCD will display“CONT”.

COUNT

Mode Parameter/Value

K i t S e l e c t

K i t E d i t

S e t u p

C l i c k

Te m p o S o n g

2. Press the [ENTER] button, and use the [-/+] buttons to select“1MIT”,“2MIT”and

“3MIT”(“1MIT”: One minute, “2MIT”: Two minutes, “3MIT”: Three minutes)

ENTER

Mode

Parameter/Value

K i t S e l e c t

K i t E d i t

S e t u p

C l i c k

Te m p o S o n g

3. Press [ENTER] button again, the LCD will display “RADY”.

ENTER

Mode Parameter/Value

K i t S e l e c t

K i t E d i t

S e t u p

C l i c k

Te m p o S o n g

4. It starts counting by hitting the drum.

5. When time is out, the number of hitting drum will be displayed on the LCD and return to the

“KIT” menu.

30

There is a simple way to restore everything in the drum module to the factory settings. This includes all trigger settings, drum kits, effects, and the song you recorded. If you are certain you want to do this, follow these steps:

1. Turn the power switch to OFF

2. Hold down the [-/+] buttons and turn the power switch to ON. The display will show

“RSET”, which means all of the parameters in the drum module have been restored to

their factory settings.

Mode Parameter/Value

K i t S e l e c t

K i t E d i t

S e t u p

C l i c k

Te m p o S o n g

31

Drum Kits List

Kit #

021

022

023

024

025

017

018

019

020

013

014

015

016

006

007

008

009

010

011

012

001

002

003

004

005

Name

Acoustic 1

Acoustic 2

Room

Nine-oh

Rock 1

Dance Club

Jazz

Rap-hop

Early R&B

Electronic 1

Crunch

Compressed

Electronic 2

Analog

Drum Box 1

Latin

Pop

Eight-oh

Electro-pop

Trash

Rock 2

Reggae-pop

Brush

Modern R&B

Drum Box 2

Kit #

031

032

033

034

035

036

037

026

027

028

029

030

042

043

044

045

038

039

040

041

Name

Mute Standard 1

Mute Standard 2

Electronic 1

Mute Standard 3

Jazz 1

Jazz 2

Latin 1

Power Rock 1

Latin 2

Power Rock 2

Power Rock 3

Electro Rock 1

Hard Rock 1

Explosion

Electro Rock 2

Hard Rock 2

Electro Rock 3

Latin Rock

Metal

Power Rock 4

32

Voice List

Group 1: Kick Drums

01 Acoustic kick 1

02 Acoustic kick 2

03 Room kick 1

04 Room kick 2

05 Rock kick 1

06 Jazz kick

07 Early R&B kick

08 Compressed kick

09 Latin kick

10 Pop kick

11 Trash kick

12 Rock kick 2

13 Reggae-pop kick

14 Brush kick

15 Modern R&B kick

16 Big kick

17 Rock kick 3

18 Rock kick 4

19 Rock kick 5

20 8-oh kick

21 9-oh kick

22 Dance club kick

23 Rap-hop kick

24 Electronic kick 1

25 Electronic kick 2

26 Analog kick

27 Drum box kick 1

28 Drum box kick 2

29 Crunch kick

30 Electro-pop kick

31 Thick kick

BD_DP50_Fatso

BD_DP50_Tape

BD_DP50_Warm_Fatso

BD_DP50_Warm_Tape

BD_DP50_X

BD_DP50_Warm_X

MD16_BD_Elec_1

MD16_BD_Gated_2

MD16_BD_Slap_1

MD16_BD_Slap_2

Group 2: Snare Drums

01 Acoustic snare 1

02 Piccolo snare 1

03 Piccolo snare 2

04 Room snare 1

05 Room snare 2

06 Rock snare 1

07 Rock snare 2

08 Rock snare 3

09 Rock snare 4

10 Compressed snare

11 Jazz snare

12 Acoustic snare 2

13 Acoustic snare 3

14 Trash snare

15 Pop snare 1

16 Reggae-pop snare

17 Brush snare

18 Early R&B snare

19 Pop snare 2

20 Latin snare+tambourine

21 Electro-pop snare

22 Rap-hop snare

23 Analog snare 1

24 Modern R&B snare

25 Rock snare 5

26 Electronic snare 1

27 Drum box snare 1

28 8-oh snare

29 Dance club snare

30 9-oh snare

31 Drum box snare 2

32 Crunch snare 1

33 Electronic snare 2

34 Analog snare 2

35 Crunch snare 2

36 Drum box snare 3

37 Noise snare

38 Reso-snare

39 Bubble snare

40 Acoustic rimshot 1

41 Early R&B rimshot

42 Pop rimshot 1

43 Piccolo rimshot 1

44 Rock rimshot 1

45 Jazz rimshot 1

46 Acoustic rimshot 2

47 Compressed rimshot

48 Room rimshot

49 Pop rimshot 2

50 Rock rimshot 2

51 Reggae-pop rimshot

52 Brush rimshot

53 Analog rimshot 1

33

Voice List

54 Modern R&B rimshot

55 Trash rimshot

56 Drum box rimshot 1

57 8-oh rimshot

58 Dance club rimshot

59 Electronic rimshot 1

60 Crunch rimshot

61 Electronic rimshot 2

62 Analog rimshot 2

63 Drum box rimshot 2

64 Electro-pop rimshot

65 Piccolo snare 3

66 Piccolo rimshot 2

67 Rock snare 6

68 Rock rimshot 3

69 SD_DP50_Fatso

70 SD_DP50_Tape

71 SD_DP50_warm_Fatso

72 SD_DP50_warm_Tape

73 MD16_SD_Fusion_1

74 MD16_SD_Acoust_1

75 MD16_SD_Killa_1

76 MD16_SD_Acoust_1

77 Rim_DP50_Fatso

78 Rim_DP50_Tape

79 Rim_DP50_warm_Fatso

80 Rim_DP50_warm_Tape

81 Tamb_DP50_Fatso

82 MD16_Stick_2

83 MD16_Stick_3

84 MD16_SD_Ska_3

85 MD16_Clap_1

Group 3: Toms

01 Acoustic tom 1 (high)

02 Acoustic tom 1 (mid)

03 Acoustic tom 1 (low)

04 Acoustic tom 2 (high)

05 Acoustic tom 2 (mid)

06 Acoustic tom 2 (low)

07 Room tom 1 (high)

08 Room tom 1 (mid)

09 Room tom 1 (low)

10 Compressed tom (high)

11 Compressed tom (mid)

12 Compressed tom (low)

13 Rock tom 1 (high)

14 Rock tom 1 (mid)

15 Rock tom 1 (low)

16 Rock tom 2 (high)

17 Rock tom 2 (mid)

18 Rock tom 2 (low)

19 Pop tom 1 (high)

20 Pop tom 1 (mid)

21 Pop tom 1 (low)

22 Pop tom 2 (high)

23 Pop tom 2 (mid)

24 Pop tom 2 (low)

25 Tight tom (high)

26 Tight tom (mid)

27 Tight tom (low)

28 D-dub tom (high)

29 D-dub tom (mid)

30 D-dub tom (low)

31 Rock tom 3 (high)

32 Rock tom 3 (mid)

33 Rock tom 3 (low)

34 Rock tom 4 (high)

35 Rock tom 4 (mid)

36 Rock tom 4 (low)

37 Rock tom 5

38 Modern R&B tom (high)

39 Modern R&B tom (mid)

40 Modern R&B tom (low)

41 Jazz tom (high)

42 Jazz tom (mid)

43 Jazz tom (low)

44 Brush tom (high)

45 Brush tom (mid)

46 Brush tom (low)

47 Early R&B tom (high)

48 Early R&B tom (mid)

49 Early R&B tom (low)

50 Reggae-pop tom & timbale

51 Reggae-pop tom & conga

52 Reggae-pop tom & conga

53 Latin tom & conga

54 Latin tom & bongo

55 Electro-pop tom (high)

56 Electro-pop tom (mid)

57 Electro-pop tom (low)

58 Electro-pop tom 2 (high)

59 Electro-pop tom 2 (mid)

60 Electro-pop tom 2 (low)

61 Trash tom (high)

62 Trash tom (mid)

63 Trash tom (low)

64 Crunch tom (high)

65 Crunch tom (mid)

66 Crunch tom (low)

67 Rap-hop tom (high)

68 Rap-hop tom (mid)

69 Rap-hop tom (low)

70 Electronic tom 1 (high)

34

Voice List

71 Electronic tom 1 (mid)

72 Electronic tom 1 (low)

73 Electronic tom 2 (high)

74 Electronic tom 2 (mid)

75 Electronic tom 2 (low)

76 Analog tom (high)

77 Analog tom (mid)

78 Analog tom (low)

79 9-oh tom (high)

80 9-oh tom (mid)

81 9-oh tom (low)

82 9-oh tom 2 (high)

83 9-oh tom 2 (mid)

84 9-oh tom 2 (low)

85 8-oh tom-fall (high)

86 8-oh tom-fall (mid)

87 8-oh tom-fall (low)

88 Drum box tom 1 (high)

89 Drum box tom 1 (mid)

90 Drum box tom 1 (low)

91 Drum box tom 2 (high)

92 Drum box tom 2 (mid)

93 Drum box tom 2 (low)

94 Dance club tom (high)

95 Dance club tom (mid)

96 Dance club tom (low)

97 Tom_Dp50_01_Fatso

98 Tom_Dp50_02_Fatso

99 Tom_Dp50_03_Fatso

100 Tom_DP50_01_Tape

101 Tom_DP50_02_Tape

102 Tom_DP50_03_Tape

103 Tom_DP50_01_warm_Fatso

104 Tom_DP50_02_warm_Fatso

Group 4: Cymbals

0 1 Crash cymbal 1

02 Crash cymbal 2

03 Rap-hop crash

04 Mid crash 1

05 Mid crash 2

06 Dark crash

07 18" crash 1

08 18" crash 2

105 Tom_DP50_03_warm_Fatso

106 Tom_DP50_01_warm_Tape

107 Tom_DP50_02_warm_Tape

108 Tom_DP50_03_warm_Tape

109 Tom_DP50_01_X

110 Tom_DP50_02_X

111 Tom_DP50_03_X

112 Tom_DP50_01_warm_X

113 Tom_DP50_02_warm_X

114 Tom_DP50_03_warm_X

115 Conga_DP50_H_Fatso

116 Conga_DP50_L_Fatso

117 MD16_Tom_Elec_1

118 MD16_Tom_Elec_2

119 MD16_Tom_Elec_3

120 MD16_Tom_1

121 MD16_Tom_2

122 MD16_Tom_3

123 MD16_Timb_1

124 MD16_Timb_2

125 MD16_Timb_3

126 MD16_Cow_03

127 MD16_Cow_02

09 Mid splash

10 High splash

11 Crispy splash

12 Trash splash

13 Small splash

14 Electro splash

15 Dark splash

16 Low crash 1

17 Low crash 2

18 Analog crash

19 Electro-pop crash

20 Dance club crash

21 Electro crash 1

22 Electro crash 2

23 Falling crash

24 Submarine crash

25 Sizzle ride

26 Sizzle ride plus bell

27 Cymbal ride bell 1

28 Cymbal ride bell 2

29 Low ride

30 Early R&B ride

31 Ride crash

32 Brush ride

33 Cymbal ride plus bell 3

34 Latin ride & cowbell

35 Cymbal ride plus bell 1

36 Cymbal ride plus bell 2

37 Trash ride

38 Electronic ride 1

39 Electro-pop ride

40 High ping ride

41 Drum box ride

42 9-oh ride crash

35

Voice List

43 Pie tin ride

44 Electronic ride 2

45 Crunch ride

46 Electronic crash-ride

47 Electronic ride 3

48 Ride_DP50_Fatso

49 Ride_DP50_Tape

50 Crash_DP50_Tape

51 Ride_DP50_Fatso

52 Crash_DP50_Fatso

53 Shaker_DP50_Fatsp

54 MD16_Ride

55 MD16_Crash

56 MD16_Whistle

57 MD16_Shaker

58 00105_Rim

59 000ed_Rim

60 00100_Rim

61 000ea_Rim

62 00103_Rim

63 000e7_Rim

64 00110_Rim

65 000f1_Rim

66 00101_Rim

67 0010f_Rim

68 000F0_Rim

69 00111_Rim

70 000e9_Rim

71 00104_Rim

72 000eb_Rim

73 00112_Rim

74 000fb_Rim

75 00113_Rim

76 000fd_Rim

77 0010c_Rim

78 000f7_Rim

79 0010e_Rim

80 000f8_Rim

81 000f4_Rim

82 000fa_Rim

83 00108_Rim

84 0010a_Rim

85 000ee_Rim

86 0010d_Rim

87 000f9_Rim

88 0010b_Rim

89 000f2_Rim

90 00107_Rim

91 000ef_Rim

92 00106_Rim

93 00115_Rim

94 000fc_Rim

95 Ride_DP50_Fatso_Rim

96 Crash_DP50_Fatso_Rim

Group 5: Hi -hats

1 Brush hat 1 closed

2 Brush hat 1 foot

3 Brush hat 1 open

4 Brush hat 1 splash

5 Brush hat 2 closed

6 Brush hat 2 foot

7 Brush hat 2 open

8 Brush hat 2 splash

9 Room hat closed

10 Room hat foot

11 Room hat open

12 Room hat splash

13 Rock hat 1 closed

14 Rock hat 1 foot

15 Rock hat 1 open

16 Rock hat 1 splash

17 Rock hat 2 closed

18 Rock hat 2 foot

19 Rock hat 2 open

20 Rock hat 2 splash

21 Small hat 1 closed

22 Small hat 1 foot

23 Small hat 1 open

24 Small hat 1 splash

25 Small hat 2 closed

26 Small hat 2 foot

27 Small hat 2 open

28 Small hat 2 splash

29 Snappy brush hat closed

30 Snappy brush hat foot

31 Snappy brush hat open

32 Snappy brush hat splash

33 Trash hat closed

34 Trash hat foot

35 Trash hat open

36 Trash hat splash

37 Early R&B hat closed

38 Early R&B hat foot

39 Early R&B hat open

40 Early R&B hat splash

41 Boom snap hat closed

42 Boom snap hat open

36

Voice List

43 Boom snap hat splash

44 Rock hat 3 closed

45 Rock hat 3 open

46 8-oh hat closed

47 8-oh hat foot

48 8-oh hat open

49 Dance club hat closed

50 Dance club hat foot

51 Dance club hat open

52 Rap-hop hat closed

53 Rap-hop hat foot

54 Rap-hop hat open

55 Rap-hop hat splash

56 Electronic hat 1 closed

57 Electronic hat 1 foot

58 Electronic hat 1 open

59 Crunch hat closed

60 Crunch hat foot

61 Crunch hat open

62 Electronic hat 2 closed

63 Electronic hat 2 foot

64 Electronic hat 2 open

65 Electronic hat 2 splash

66 Analog hat closed

67 Analog hat foot

68 Analog hat open

69 Drum box hat 1 closed

70 Drum box hat 1 foot

71 Drum box hat 1 open

72 9-oh hat closed

73 9-oh hat foot

74 9-oh hat open

75 9-oh hat splash

76 Electro-pop hat closed

77 Electro-pop hat foot

78 Electro-pop hat open

79 Electro-pop hat splash

80 Modern R&B hat closed

81 Modern R&B hat foot

82 Modern R&B hat open

83 Modern R&B hat splash

84 Drum box hat 2 closed

85 Drum box hat 2 foot

86 Drum box hat 2 open

87 Shaker hat closed

88 HHo_DP50_Fatso

89 HH_DP50_Fatso

90 HHo_DP50_Tape

91 HH_DP50_Tape

92 TriOpen_DP50_Fatso

93 TriClosed_DP50_Fatso

94 MD16_HH_2

95 MD16_HH_1

96 MD16_HH_pedal

97 MD16_HHo

Group 6: Percussion

01 Agogo (high)

02 Agogo (low)

03 Agogo (high/low)

04 Conga (high)

05 Conga (low)

06 Hand claps

07 Timbale (high)

08 Timbale (low)

09 Triangle mute

10 Triangle open

11 Triangle (open/mute)

12 Woodblock (high)

13 Woodblock (low)

14 Woodblock (high/low)

15 Shaker

16 Tambourine (down)

17 Tambourine (up)

18 Tambourine (up/down)

19 Cowbell

20 8-oh cowbell

Group 7:

01 Tom_DP50_04_Fatso

02 Tom1_DR220e

03 Tom2_DR220e

04 Tom3_DR220e

05 MD16_Tabla_3

06 MD16_Tabla_4

07 MD16_Tabla_5

08 MD16_Tabla_4

09 MD16_Tabla_5

10 Tom1_DR220e

11 Tom2_DR220e

12 Tom3_DR220e

13 DMX606_Tom_01

14 DMX606_Tom_03

15 DMX606_Tom_05

16 Kit1_Tom1_Rim

17 Kit1_Tom2_Rim

18 Kit1_Tom3_Rim

19 Kit2_Tom1_Rim

20 Kit2_Tom2_Rim

21 Kit2_Tom3_Rim

37

Voice List

22 Kit3_Tom1_Rim

23 Kit3_Tom2_Rim

24 Kit3_Tom3_Rim

25 Kit4_Tom1_Rim

26 Kit4_Tom2_Rim

27 Kit4_Tom3_Rim

28 Kit5_Tom1_Rim

29 Kit5_Tom2_Rim

30 Kit5_Tom3_Rim

31 Kit6_Tom1_Rim

32 Kit6_Tom2_Rim

33 Kit6_Tom3_Rim

34 Kit7_Tom1_Rim

35 Kit7_Tom2_Rim

36 Kit7_Tom3_Rim

37 Kit8_Tom1_Rim

38 Kit8_Tom2_Rim

39 Kit8_Tom3_Rim

40 Kit9_Tom1_Rim

41 Kit9_Tom2_Rim

42 Kit9_Tom3_Rim

43 Kit10_Tom1_Rim

44 Kit10_Tom2_Rim

45 Kit10_Tom3_Rim

46 Kit11_Tom1_Rim

47 Kit11_Tom2_Rim

48 Kit11_Tom3_Rim

49 Kit12_Tom1_Rim

50 Kit12_Tom2_Rim

51 Kit12_Tom3_Rim

52 Kit13_Tom1_Rim

53 Kit13_Tom2_Rim

54 Kit13_Tom3_Rim

55 Kit14_Tom1_Rim

56 Kit14_Tom2_Rim

57 Kit14_Tom3_Rim

58 Kit15_Tom1_Rim

59 Kit15_Tom2_Rim

60 Kit15_Tom3_Rim

61 Kit17_Tom1_Rim

62 Kit17_Tom2_Rim

63 Kit17_Tom3_Rim

64 Kit18_Tom1_Rim

65 Kit18_Tom2_Rim

66 Kit18_Tom3_Rim

67 Kit19_Tom1_Rim

68 Kit19_Tom2_Rim

69 Kit19_Tom3_Rim

70 Kit20_Tom1_Rim

71 Kit20_Tom2_Rim

72 Kit20_Tom3_Rim

73 Kit21_Tom1_Rim

74 Kit21_Tom2_Rim

75 Kit21_Tom3_Rim

76 Kit22_Tom1_Rim

77 Kit22_Tom2_Rim

78 Kit22_Tom3_Rim

79 Kit23_Tom1_Rim

80 Kit23_Tom2_Rim

81 Kit23_Tom3_Rim

82 Kit24_Tom1_Rim

83 Kit24_Tom2_Rim

84 Kit24_Tom3_Rim

85 Kit25_Tom1_Rim

86 Kit25_Tom2_Rim

87 Kit18_Tom3_Rim

88 Kit26_Tom1_Rim

89 Kit26_Tom2_Rim

90 Kit26_Tom3_Rim

91 Kit27_Tom1_Rim

92 Kit27_Tom2_Rim

93 Kit27_Tom3_Rim

94 Kit28_Tom1_Rim

95 Kit28_Tom2_Rim

96 Kit28_Tom3_Rim

97 Kit29_Tom1_Rim

98 Kit29_Tom2_Rim

99 Kit29_Tom3_Rim

100 Kit30_Tom1_Rim

101 Kit30_Tom2_Rim

102 Kit30_Tom3_Rim

103 Kit31_Tom1_Rim

104 Kit31_Tom2_Rim

105 Kit31_Tom3_Rim

106 Kit32_Tom1_Rim

107 Kit32_Tom2_Rim

108 Kit32_Tom3_Rim

109 MD16_Tom_Elec_1_Rim

110 MD16_Tom_Elec_2_Rim

111 MD16_Tom_Elec_3_Rim

112 MD16_Tom_1_Rim

113 MD16_Tom_2_Rim

114 MD16_Tom_3_Rim

38

Style List

016

017

018

019

020

021

022

009

010

011

012

013

014

015

023

024

025

Number

001

002

003

004

005

006

007

008

Song Name/Style

Rock Shuffle

Surf Pop

Techno

60's Rock

Hard Rock

Pop Bossa

80's Rock

16 Beat

Pop Shuffle

Guitar Pop

Modern 6/8

Swing Funk

Piano Ballad

Rap

16 Beat Ballad

Pop Ballad

8 Beat Dance

8 Beat Modern

7 0's Disco

Big Band

Country 8 Beat

3/4 Gospel

Soul

8 Beat Two

Reggae

041

042

043

044

045

046

047

034

035

036

037

038

039

040

048

049

050

Number

026

027

028

029

030

031

032

033

Song Name/Style

Swing Reggae

English Waltz

Tango

Rhythm & Blues

Polka

Bluegrass

Bossanova

ClubLatin

Country

DancePop

DiscoParty

Foxtrot

Garage

Hippop

JazzRock

LatinDisco

Mambo

ModernJazz

Merengue

PopRock

Rock&Roll

16beat

Salsa

SlowRock

Swing

39

MIDI Implementation Chart

Function

Basic Default

Channel Changed

Mode Default

Messages

Altered

Note

Number :True voice

Velocity Note ON

Note OFF

Affter Key's

Pitch Bender

Control Change 0, 32

1

5

6

7

10

11

64

65

66

67

80, 81

91, 93

100,101

121

X

X

X

X

X

X

O

O

X

X

Transmitted

1-16CH

1-16CH

Mode 3

X

**********

0~127

**********

X

X

O

O

O 9nH,v=1~127

O 8nH,v=0

X

X

O

O

O

O

O

O

O

O

O

O (*1)

O

Recognized

1-16CH

1-16CH

Mode 3

X

X

0~127

0~127

O

O

O

O

O 9nH,v=1~127

O 9nH,v=0 or 8nh

X

O

O

Remarks

Bank Select

Modulation

Portamento time

Data Entry

Volume

Pan

Expression

Sustain

Portamento

Sostenuto

Soft pedal

DSP TYPE

DSP DEPTH

RPN LSB,MSB

Reset all Controllers

Program

Change : True

System Exclusive

System : Song Position

: Song Select

Common : Tune

Aux : Local on/off

: All Notes Off

Messages : Active Sense

: Reset

O 0-127

0-127

X

X

X

X

X

O

X

X

O 0-127

0-127

X

X

X

X

O

O

O

O

Mode1:OMNI ON, POLY Mode2:OMNI ON, MONO O: Yes

Mode3:OMNI OFF, POLY Mode4:OMNI OFF, MONO X: NO

*1: Registered parameter number:

#0: Pitch sensivity

#1: Fine tuning cents

#2: Coarse tuning in half-tones

10506069-V1.0

40

Specifications

Drum Pads:

1 Snare with RIM Function, 3 TOM Pads with RIM Function,

2 Cymbal Pads with RIM Function and choke Function,

1 Hi-Hat Pad, 1 Hi-Hat Pedal, 1 Kick Drum Pedal

Display: Multi-function Backlit LCD Display

Polyphony: 64 Notes Polyphony Max

Voice Control:

583 Percussion Voices, 45 Preset and 5 Custom

Effect: Reverb type (10), Chorus type (13), Level

Styles:

50 Styles

Pad Control: Sensitivity, Threshold, Velocity Curve

Demo: 2 Songs

Song recording: Real-time Record and Playback

Others: Tap, Click Level, Click Sound, Click Tempo,

Metronome (1/4, 2/4, 3/4, 4/4, 6/4, 3/8, 6/8, 12/8), Count

Interface: DC 9V Power Socket, PHONES, USB TO HOST,

Line Out(L/MONO,R), AUX IN, Serial connection jack for

the pad trigger cables

41

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement